summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2023-10-23 15:19:48 +0200
committerKalle Valo <kvalo@kernel.org>2023-10-30 19:29:52 +0200
commit1535d5962d79b8f4bddfd480399828b8db9d7a1c (patch)
tree806be2995bfd46e2215f0412ea928c0899cb2a89
parent757a46c2a7a99a4e12f6a267e945c98324c41702 (diff)
wifi: remove orphaned orinoco driver
Orinoco is a PIO-only ISA/PCMCIA 802.11b device with extra bus interface connections for PCI/Cardbus/mini-PCI and a few pre-2002 Apple PowerMac variants. It supports both wireless extensions and CFG80211, but I could not tell if it requires using both. This device used to be one of the most common ones 20 years ago, but has been orphaned for most of the time since then, and the conversion to cfg80211 has stalled in 2010. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@kernel.org>
-rw-r--r--MAINTAINERS7
-rw-r--r--drivers/net/wireless/intersil/Kconfig1
-rw-r--r--drivers/net/wireless/intersil/Makefile1
-rw-r--r--drivers/net/wireless/intersil/orinoco/Kconfig143
-rw-r--r--drivers/net/wireless/intersil/orinoco/Makefile15
-rw-r--r--drivers/net/wireless/intersil/orinoco/airport.c268
-rw-r--r--drivers/net/wireless/intersil/orinoco/cfg.c291
-rw-r--r--drivers/net/wireless/intersil/orinoco/cfg.h15
-rw-r--r--drivers/net/wireless/intersil/orinoco/fw.c387
-rw-r--r--drivers/net/wireless/intersil/orinoco/fw.h21
-rw-r--r--drivers/net/wireless/intersil/orinoco/hermes.c778
-rw-r--r--drivers/net/wireless/intersil/orinoco/hermes.h534
-rw-r--r--drivers/net/wireless/intersil/orinoco/hermes_dld.c477
-rw-r--r--drivers/net/wireless/intersil/orinoco/hermes_dld.h52
-rw-r--r--drivers/net/wireless/intersil/orinoco/hermes_rid.h165
-rw-r--r--drivers/net/wireless/intersil/orinoco/hw.c1362
-rw-r--r--drivers/net/wireless/intersil/orinoco/hw.h60
-rw-r--r--drivers/net/wireless/intersil/orinoco/main.c2414
-rw-r--r--drivers/net/wireless/intersil/orinoco/main.h50
-rw-r--r--drivers/net/wireless/intersil/orinoco/mic.c89
-rw-r--r--drivers/net/wireless/intersil/orinoco/mic.h23
-rw-r--r--drivers/net/wireless/intersil/orinoco/orinoco.h251
-rw-r--r--drivers/net/wireless/intersil/orinoco/orinoco_cs.c350
-rw-r--r--drivers/net/wireless/intersil/orinoco/orinoco_nortel.c314
-rw-r--r--drivers/net/wireless/intersil/orinoco/orinoco_pci.c257
-rw-r--r--drivers/net/wireless/intersil/orinoco/orinoco_pci.h54
-rw-r--r--drivers/net/wireless/intersil/orinoco/orinoco_plx.c362
-rw-r--r--drivers/net/wireless/intersil/orinoco/orinoco_tmd.c237
-rw-r--r--drivers/net/wireless/intersil/orinoco/orinoco_usb.c1787
-rw-r--r--drivers/net/wireless/intersil/orinoco/scan.c259
-rw-r--r--drivers/net/wireless/intersil/orinoco/scan.h21
-rw-r--r--drivers/net/wireless/intersil/orinoco/spectrum_cs.c328
-rw-r--r--drivers/net/wireless/intersil/orinoco/wext.c1428
-rw-r--r--drivers/net/wireless/intersil/orinoco/wext.h13
34 files changed, 0 insertions, 12814 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 2ada93d4cee4..161bf9d89535 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16068,13 +16068,6 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux.git
F: Documentation/filesystems/orangefs.rst
F: fs/orangefs/
-ORINOCO DRIVER
-L: linux-wireless@vger.kernel.org
-S: Orphan
-W: https://wireless.wiki.kernel.org/en/users/Drivers/orinoco
-W: http://www.nongnu.org/orinoco/
-F: drivers/net/wireless/intersil/orinoco/
-
OV2659 OMNIVISION SENSOR DRIVER
M: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
L: linux-media@vger.kernel.org
diff --git a/drivers/net/wireless/intersil/Kconfig b/drivers/net/wireless/intersil/Kconfig
index f2455ef45d99..201b1534a9ca 100644
--- a/drivers/net/wireless/intersil/Kconfig
+++ b/drivers/net/wireless/intersil/Kconfig
@@ -12,7 +12,6 @@ config WLAN_VENDOR_INTERSIL
if WLAN_VENDOR_INTERSIL
-source "drivers/net/wireless/intersil/orinoco/Kconfig"
source "drivers/net/wireless/intersil/p54/Kconfig"
endif # WLAN_VENDOR_INTERSIL
diff --git a/drivers/net/wireless/intersil/Makefile b/drivers/net/wireless/intersil/Makefile
index 773147110c54..27e9b2869da1 100644
--- a/drivers/net/wireless/intersil/Makefile
+++ b/drivers/net/wireless/intersil/Makefile
@@ -1,3 +1,2 @@
# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_HERMES) += orinoco/
obj-$(CONFIG_P54_COMMON) += p54/
diff --git a/drivers/net/wireless/intersil/orinoco/Kconfig b/drivers/net/wireless/intersil/orinoco/Kconfig
deleted file mode 100644
index f62730aa7be3..000000000000
--- a/drivers/net/wireless/intersil/orinoco/Kconfig
+++ /dev/null
@@ -1,143 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config HERMES
- tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"
- depends on (PPC_PMAC || PCI || PCMCIA)
- depends on CFG80211
- select CFG80211_WEXT_EXPORT
- select WIRELESS_EXT
- select WEXT_SPY
- select WEXT_PRIV
- select FW_LOADER
- select CRYPTO
- select CRYPTO_MICHAEL_MIC
- help
- A driver for 802.11b wireless cards based on the "Hermes" or
- Intersil HFA384x (Prism 2) MAC controller. This includes the vast
- majority of the PCMCIA 802.11b cards (which are nearly all rebadges)
- - except for the Cisco/Aironet cards. Cards supported include the
- Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco,
- Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya,
- IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear
- MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel
- IPW2011, and Symbol Spectrum24 High Rate amongst others.
-
- This option includes the guts of the driver, but in order to
- actually use a card you will also need to enable support for PCMCIA
- Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below.
-
- You will also very likely also need the Wireless Tools in order to
- configure your card and that /etc/pcmcia/wireless.opts works :
- <https://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>
-
-config HERMES_PRISM
- bool "Support Prism 2/2.5 chipset"
- depends on HERMES
- help
-
- Say Y to enable support for Prism 2 and 2.5 chipsets. These
- chipsets are better handled by the hostap driver. This driver
- would not support WPA or firmware download for Prism chipset.
-
- If you are not sure, say N.
-
-config HERMES_CACHE_FW_ON_INIT
- bool "Cache Hermes firmware on driver initialisation"
- depends on HERMES
- default y
- help
- Say Y to cache any firmware required by the Hermes drivers
- on startup. The firmware will remain cached until the
- driver is unloaded. The cache uses 64K of RAM.
-
- Otherwise load the firmware from userspace as required. In
- this case the driver should be unloaded and restarted
- whenever the firmware is changed.
-
- If you are not sure, say Y.
-
-config APPLE_AIRPORT
- tristate "Apple Airport support (built-in)"
- depends on PPC_PMAC && HERMES
- help
- Say Y here to support the Airport 802.11b wireless Ethernet hardware
- built into the Macintosh iBook and other recent PowerPC-based
- Macintosh machines. This is essentially a Lucent Orinoco card with
- a non-standard interface.
-
- This driver does not support the Airport Extreme (802.11b/g). Use
- the BCM43xx driver for Airport Extreme cards.
-
-config PLX_HERMES
- tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.)"
- depends on PCI && HERMES
- help
- Enable support for PCMCIA cards supported by the "Hermes" (aka
- orinoco) driver when used in PLX9052 based PCI adaptors. These
- adaptors are not a full PCMCIA controller but act as a more limited
- PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that
- 802.11b PCMCIA cards can be used in desktop machines. The Netgear
- MA301 is such an adaptor.
-
-config TMD_HERMES
- tristate "Hermes in TMD7160 based PCI adaptor support"
- depends on PCI && HERMES
- help
- Enable support for PCMCIA cards supported by the "Hermes" (aka
- orinoco) driver when used in TMD7160 based PCI adaptors. These
- adaptors are not a full PCMCIA controller but act as a more limited
- PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that
- 802.11b PCMCIA cards can be used in desktop machines.
-
-config NORTEL_HERMES
- tristate "Nortel emobility PCI adaptor support"
- depends on PCI && HERMES
- help
- Enable support for PCMCIA cards supported by the "Hermes" (aka
- orinoco) driver when used in Nortel emobility PCI adaptors. These
- adaptors are not full PCMCIA controllers, but act as a more limited
- PCI <-> PCMCIA bridge.
-
-config PCI_HERMES
- tristate "Prism 2.5 PCI 802.11b adaptor support"
- depends on PCI && HERMES && HERMES_PRISM
- help
- Enable support for PCI and mini-PCI 802.11b wireless NICs based on
- the Prism 2.5 chipset. These are true PCI cards, not the 802.11b
- PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also
- common. Some of the built-in wireless adaptors in laptops are of
- this variety.
-
-config PCMCIA_HERMES
- tristate "Hermes PCMCIA card support"
- depends on PCMCIA && HERMES && HAS_IOPORT_MAP
- help
- A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
- as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
- EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and
- others). It should also be usable on various Prism II based cards
- such as the Linksys, D-Link and Farallon Skyline. It should also
- work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN.
-
- You will very likely need the Wireless Tools in order to
- configure your card and that /etc/pcmcia/wireless.opts works:
- <https://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
-
-config PCMCIA_SPECTRUM
- tristate "Symbol Spectrum24 Trilogy PCMCIA card support"
- depends on PCMCIA && HERMES && HAS_IOPORT_MAP
- help
-
- This is a driver for 802.11b cards using RAM-loadable Symbol
- firmware, such as Symbol Wireless Networker LA4100, CompactFlash
- cards by Socket Communications and Intel PRO/Wireless 2011B.
-
- This driver requires firmware download on startup. Utilities
- for downloading Symbol firmware are available at
- <http://sourceforge.net/projects/orinoco/>
-
-config ORINOCO_USB
- tristate "Agere Orinoco USB support"
- depends on USB && HERMES
- select FW_LOADER
- help
- This driver is for USB versions of the Agere Orinoco card.
diff --git a/drivers/net/wireless/intersil/orinoco/Makefile b/drivers/net/wireless/intersil/orinoco/Makefile
deleted file mode 100644
index 0c29c56c88d6..000000000000
--- a/drivers/net/wireless/intersil/orinoco/Makefile
+++ /dev/null
@@ -1,15 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the orinoco wireless device drivers.
-#
-orinoco-objs := main.o fw.o hw.o mic.o scan.o wext.o hermes_dld.o hermes.o cfg.o
-
-obj-$(CONFIG_HERMES) += orinoco.o
-obj-$(CONFIG_PCMCIA_HERMES) += orinoco_cs.o
-obj-$(CONFIG_APPLE_AIRPORT) += airport.o
-obj-$(CONFIG_PLX_HERMES) += orinoco_plx.o
-obj-$(CONFIG_PCI_HERMES) += orinoco_pci.o
-obj-$(CONFIG_TMD_HERMES) += orinoco_tmd.o
-obj-$(CONFIG_NORTEL_HERMES) += orinoco_nortel.o
-obj-$(CONFIG_PCMCIA_SPECTRUM) += spectrum_cs.o
-obj-$(CONFIG_ORINOCO_USB) += orinoco_usb.o
diff --git a/drivers/net/wireless/intersil/orinoco/airport.c b/drivers/net/wireless/intersil/orinoco/airport.c
deleted file mode 100644
index 45ac00fdafa5..000000000000
--- a/drivers/net/wireless/intersil/orinoco/airport.c
+++ /dev/null
@@ -1,268 +0,0 @@
-/* airport.c
- *
- * A driver for "Hermes" chipset based Apple Airport wireless
- * card.
- *
- * Copyright notice & release notes in file main.c
- *
- * Note specific to airport stub:
- *
- * 0.05 : first version of the new split driver
- * 0.06 : fix possible hang on powerup, add sleep support
- */
-
-#define DRIVER_NAME "airport"
-#define PFX DRIVER_NAME ": "
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/mod_devicetable.h>
-#include <asm/pmac_feature.h>
-
-#include "orinoco.h"
-
-#define AIRPORT_IO_LEN (0x1000) /* one page */
-
-struct airport {
- struct macio_dev *mdev;
- void __iomem *vaddr;
- unsigned int irq;
- int irq_requested;
- int ndev_registered;
-};
-
-static int
-airport_suspend(struct macio_dev *mdev, pm_message_t state)
-{
- struct orinoco_private *priv = dev_get_drvdata(&mdev->ofdev.dev);
- struct net_device *dev = priv->ndev;
- struct airport *card = priv->card;
- unsigned long flags;
- int err;
-
- printk(KERN_DEBUG "%s: Airport entering sleep mode\n", dev->name);
-
- err = orinoco_lock(priv, &flags);
- if (err) {
- printk(KERN_ERR "%s: hw_unavailable on PBOOK_SLEEP_NOW\n",
- dev->name);
- return 0;
- }
-
- orinoco_down(priv);
- orinoco_unlock(priv, &flags);
-
- disable_irq(card->irq);
- pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE,
- macio_get_of_node(mdev), 0, 0);
-
- return 0;
-}
-
-static int
-airport_resume(struct macio_dev *mdev)
-{
- struct orinoco_private *priv = dev_get_drvdata(&mdev->ofdev.dev);
- struct net_device *dev = priv->ndev;
- struct airport *card = priv->card;
- unsigned long flags;
- int err;
-
- printk(KERN_DEBUG "%s: Airport waking up\n", dev->name);
-
- pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE,
- macio_get_of_node(mdev), 0, 1);
- msleep(200);
-
- enable_irq(card->irq);
-
- priv->hw.ops->lock_irqsave(&priv->lock, &flags);
- err = orinoco_up(priv);
- priv->hw.ops->unlock_irqrestore(&priv->lock, &flags);
-
- return err;
-}
-
-static int
-airport_detach(struct macio_dev *mdev)
-{
- struct orinoco_private *priv = dev_get_drvdata(&mdev->ofdev.dev);
- struct airport *card = priv->card;
-
- if (card->ndev_registered)
- orinoco_if_del(priv);
- card->ndev_registered = 0;
-
- if (card->irq_requested)
- free_irq(card->irq, priv);
- card->irq_requested = 0;
-
- if (card->vaddr)
- iounmap(card->vaddr);
- card->vaddr = NULL;
-
- macio_release_resource(mdev, 0);
-
- pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE,
- macio_get_of_node(mdev), 0, 0);
- ssleep(1);
-
- macio_set_drvdata(mdev, NULL);
- free_orinocodev(priv);
-
- return 0;
-}
-
-static int airport_hard_reset(struct orinoco_private *priv)
-{
- /* It would be nice to power cycle the Airport for a real hard
- * reset, but for some reason although it appears to
- * re-initialize properly, it falls in a screaming heap
- * shortly afterwards. */
-#if 0
- struct airport *card = priv->card;
-
- /* Vitally important. If we don't do this it seems we get an
- * interrupt somewhere during the power cycle, since
- * hw_unavailable is already set it doesn't get ACKed, we get
- * into an interrupt loop and the PMU decides to turn us
- * off. */
- disable_irq(card->irq);
-
- pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE,
- macio_get_of_node(card->mdev), 0, 0);
- ssleep(1);
- pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE,
- macio_get_of_node(card->mdev), 0, 1);
- ssleep(1);
-
- enable_irq(card->irq);
- ssleep(1);
-#endif
-
- return 0;
-}
-
-static int
-airport_attach(struct macio_dev *mdev, const struct of_device_id *match)
-{
- struct orinoco_private *priv;
- struct airport *card;
- unsigned long phys_addr;
- struct hermes *hw;
-
- if (macio_resource_count(mdev) < 1 || macio_irq_count(mdev) < 1) {
- printk(KERN_ERR PFX "Wrong interrupt/addresses in OF tree\n");
- return -ENODEV;
- }
-
- /* Allocate space for private device-specific data */
- priv = alloc_orinocodev(sizeof(*card), &mdev->ofdev.dev,
- airport_hard_reset, NULL);
- if (!priv) {
- printk(KERN_ERR PFX "Cannot allocate network device\n");
- return -ENODEV;
- }
- card = priv->card;
-
- hw = &priv->hw;
- card->mdev = mdev;
-
- if (macio_request_resource(mdev, 0, DRIVER_NAME)) {
- printk(KERN_ERR PFX "can't request IO resource !\n");
- free_orinocodev(priv);
- return -EBUSY;
- }
-
- macio_set_drvdata(mdev, priv);
-
- /* Setup interrupts & base address */
- card->irq = macio_irq(mdev, 0);
- phys_addr = macio_resource_start(mdev, 0); /* Physical address */
- printk(KERN_DEBUG PFX "Physical address %lx\n", phys_addr);
- card->vaddr = ioremap(phys_addr, AIRPORT_IO_LEN);
- if (!card->vaddr) {
- printk(KERN_ERR PFX "ioremap() failed\n");
- goto failed;
- }
-
- hermes_struct_init(hw, card->vaddr, HERMES_16BIT_REGSPACING);
-
- /* Power up card */
- pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE,
- macio_get_of_node(mdev), 0, 1);
- ssleep(1);
-
- /* Reset it before we get the interrupt */
- hw->ops->init(hw);
-
- if (request_irq(card->irq, orinoco_interrupt, 0, DRIVER_NAME, priv)) {
- printk(KERN_ERR PFX "Couldn't get IRQ %d\n", card->irq);
- goto failed;
- }
- card->irq_requested = 1;
-
- /* Initialise the main driver */
- if (orinoco_init(priv) != 0) {
- printk(KERN_ERR PFX "orinoco_init() failed\n");
- goto failed;
- }
-
- /* Register an interface with the stack */
- if (orinoco_if_add(priv, phys_addr, card->irq, NULL) != 0) {
- printk(KERN_ERR PFX "orinoco_if_add() failed\n");
- goto failed;
- }
- card->ndev_registered = 1;
- return 0;
- failed:
- airport_detach(mdev);
- return -ENODEV;
-} /* airport_attach */
-
-
-static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
- " (Benjamin Herrenschmidt <benh@kernel.crashing.org>)";
-MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
-MODULE_DESCRIPTION("Driver for the Apple Airport wireless card.");
-MODULE_LICENSE("Dual MPL/GPL");
-
-static const struct of_device_id airport_match[] = {
- {
- .name = "radio",
- },
- {},
-};
-
-MODULE_DEVICE_TABLE(of, airport_match);
-
-static struct macio_driver airport_driver = {
- .driver = {
- .name = DRIVER_NAME,
- .owner = THIS_MODULE,
- .of_match_table = airport_match,
- },
- .probe = airport_attach,
- .remove = airport_detach,
- .suspend = airport_suspend,
- .resume = airport_resume,
-};
-
-static int __init
-init_airport(void)
-{
- printk(KERN_DEBUG "%s\n", version);
-
- return macio_register_driver(&airport_driver);
-}
-
-static void __exit
-exit_airport(void)
-{
- macio_unregister_driver(&airport_driver);
-}
-
-module_init(init_airport);
-module_exit(exit_airport);
diff --git a/drivers/net/wireless/intersil/orinoco/cfg.c b/drivers/net/wireless/intersil/orinoco/cfg.c
deleted file mode 100644
index b2d5ec8634b5..000000000000
--- a/drivers/net/wireless/intersil/orinoco/cfg.c
+++ /dev/null
@@ -1,291 +0,0 @@
-/* cfg80211 support
- *
- * See copyright notice in main.c
- */
-#include <linux/ieee80211.h>
-#include <net/cfg80211.h>
-#include "hw.h"
-#include "main.h"
-#include "orinoco.h"
-
-#include "cfg.h"
-
-/* Supported bitrates. Must agree with hw.c */
-static struct ieee80211_rate orinoco_rates[] = {
- { .bitrate = 10 },
- { .bitrate = 20 },
- { .bitrate = 55 },
- { .bitrate = 110 },
-};
-
-static const void * const orinoco_wiphy_privid = &orinoco_wiphy_privid;
-
-/* Called after orinoco_private is allocated. */
-void orinoco_wiphy_init(struct wiphy *wiphy)
-{
- struct orinoco_private *priv = wiphy_priv(wiphy);
-
- wiphy->privid = orinoco_wiphy_privid;
-
- set_wiphy_dev(wiphy, priv->dev);
-}
-
-/* Called after firmware is initialised */
-int orinoco_wiphy_register(struct wiphy *wiphy)
-{
- struct orinoco_private *priv = wiphy_priv(wiphy);
- int i, channels = 0;
-
- if (priv->firmware_type == FIRMWARE_TYPE_AGERE)
- wiphy->max_scan_ssids = 1;
- else
- wiphy->max_scan_ssids = 0;
-
- wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
-
- /* TODO: should we set if we only have demo ad-hoc?
- * (priv->has_port3)
- */
- if (priv->has_ibss)
- wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC);
-
- if (!priv->broken_monitor || force_monitor)
- wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR);
-
- priv->band.bitrates = orinoco_rates;
- priv->band.n_bitrates = ARRAY_SIZE(orinoco_rates);
-
- /* Only support channels allowed by the card EEPROM */
- for (i = 0; i < NUM_CHANNELS; i++) {
- if (priv->channel_mask & (1 << i)) {
- priv->channels[i].center_freq =
- ieee80211_channel_to_frequency(i + 1,
- NL80211_BAND_2GHZ);
- channels++;
- }
- }
- priv->band.channels = priv->channels;
- priv->band.n_channels = channels;
-
- wiphy->bands[NL80211_BAND_2GHZ] = &priv->band;
- wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
-
- i = 0;
- if (priv->has_wep) {
- priv->cipher_suites[i] = WLAN_CIPHER_SUITE_WEP40;
- i++;
-
- if (priv->has_big_wep) {
- priv->cipher_suites[i] = WLAN_CIPHER_SUITE_WEP104;
- i++;
- }
- }
- if (priv->has_wpa) {
- priv->cipher_suites[i] = WLAN_CIPHER_SUITE_TKIP;
- i++;
- }
- wiphy->cipher_suites = priv->cipher_suites;
- wiphy->n_cipher_suites = i;
-
- wiphy->rts_threshold = priv->rts_thresh;
- if (!priv->has_mwo)
- wiphy->frag_threshold = priv->frag_thresh + 1;
- wiphy->retry_short = priv->short_retry_limit;
- wiphy->retry_long = priv->long_retry_limit;
-
- return wiphy_register(wiphy);
-}
-
-static int orinoco_change_vif(struct wiphy *wiphy, struct net_device *dev,
- enum nl80211_iftype type,
- struct vif_params *params)
-{
- struct orinoco_private *priv = wiphy_priv(wiphy);
- int err = 0;
- unsigned long lock;
-
- if (orinoco_lock(priv, &lock) != 0)
- return -EBUSY;
-
- switch (type) {
- case NL80211_IFTYPE_ADHOC:
- if (!priv->has_ibss && !priv->has_port3)
- err = -EINVAL;
- break;
-
- case NL80211_IFTYPE_STATION:
- break;
-
- case NL80211_IFTYPE_MONITOR:
- if (priv->broken_monitor && !force_monitor) {
- wiphy_warn(wiphy,
- "Monitor mode support is buggy in this firmware, not enabling\n");
- err = -EINVAL;
- }
- break;
-
- default:
- err = -EINVAL;
- }
-
- if (!err) {
- priv->iw_mode = type;
- set_port_type(priv);
- err = orinoco_commit(priv);
- }
-
- orinoco_unlock(priv, &lock);
-
- return err;
-}
-
-static int orinoco_scan(struct wiphy *wiphy,
- struct cfg80211_scan_request *request)
-{
- struct orinoco_private *priv = wiphy_priv(wiphy);
- int err;
-
- if (!request)
- return -EINVAL;
-
- if (priv->scan_request && priv->scan_request != request)
- return -EBUSY;
-
- priv->scan_request = request;
-
- err = orinoco_hw_trigger_scan(priv, request->ssids);
- /* On error the we aren't processing the request */
- if (err)
- priv->scan_request = NULL;
-
- return err;
-}
-
-static int orinoco_set_monitor_channel(struct wiphy *wiphy,
- struct cfg80211_chan_def *chandef)
-{
- struct orinoco_private *priv = wiphy_priv(wiphy);
- int err = 0;
- unsigned long flags;
- int channel;
-
- if (!chandef->chan)
- return -EINVAL;
-
- if (cfg80211_get_chandef_type(chandef) != NL80211_CHAN_NO_HT)
- return -EINVAL;
-
- if (chandef->chan->band != NL80211_BAND_2GHZ)
- return -EINVAL;
-
- channel = ieee80211_frequency_to_channel(chandef->chan->center_freq);
-
- if ((channel < 1) || (channel > NUM_CHANNELS) ||
- !(priv->channel_mask & (1 << (channel - 1))))
- return -EINVAL;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- priv->channel = channel;
- if (priv->iw_mode == NL80211_IFTYPE_MONITOR) {
- /* Fast channel change - no commit if successful */
- struct hermes *hw = &priv->hw;
- err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST |
- HERMES_TEST_SET_CHANNEL,
- channel, NULL);
- }
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-
-static int orinoco_set_wiphy_params(struct wiphy *wiphy, u32 changed)
-{
- struct orinoco_private *priv = wiphy_priv(wiphy);
- int frag_value = -1;
- int rts_value = -1;
- int err = 0;
-
- if (changed & WIPHY_PARAM_RETRY_SHORT) {
- /* Setting short retry not supported */
- err = -EINVAL;
- }
-
- if (changed & WIPHY_PARAM_RETRY_LONG) {
- /* Setting long retry not supported */
- err = -EINVAL;
- }
-
- if (changed & WIPHY_PARAM_FRAG_THRESHOLD) {
- /* Set fragmentation */
- if (priv->has_mwo) {
- if (wiphy->frag_threshold == -1)
- frag_value = 0;
- else {
- printk(KERN_WARNING "%s: Fixed fragmentation "
- "is not supported on this firmware. "
- "Using MWO robust instead.\n",
- priv->ndev->name);
- frag_value = 1;
- }
- } else {
- if (wiphy->frag_threshold == -1)
- frag_value = 2346;
- else if ((wiphy->frag_threshold < 257) ||
- (wiphy->frag_threshold > 2347))
- err = -EINVAL;
- else
- /* cfg80211 value is 257-2347 (odd only)
- * orinoco rid has range 256-2346 (even only) */
- frag_value = wiphy->frag_threshold & ~0x1;
- }
- }
-
- if (changed & WIPHY_PARAM_RTS_THRESHOLD) {
- /* Set RTS.
- *
- * Prism documentation suggests default of 2432,
- * and a range of 0-3000.
- *
- * Current implementation uses 2347 as the default and
- * the upper limit.
- */
-
- if (wiphy->rts_threshold == -1)
- rts_value = 2347;
- else if (wiphy->rts_threshold > 2347)
- err = -EINVAL;
- else
- rts_value = wiphy->rts_threshold;
- }
-
- if (!err) {
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- if (frag_value >= 0) {
- if (priv->has_mwo)
- priv->mwo_robust = frag_value;
- else
- priv->frag_thresh = frag_value;
- }
- if (rts_value >= 0)
- priv->rts_thresh = rts_value;
-
- err = orinoco_commit(priv);
-
- orinoco_unlock(priv, &flags);
- }
-
- return err;
-}
-
-const struct cfg80211_ops orinoco_cfg_ops = {
- .change_virtual_intf = orinoco_change_vif,
- .set_monitor_channel = orinoco_set_monitor_channel,
- .scan = orinoco_scan,
- .set_wiphy_params = orinoco_set_wiphy_params,
-};
diff --git a/drivers/net/wireless/intersil/orinoco/cfg.h b/drivers/net/wireless/intersil/orinoco/cfg.h
deleted file mode 100644
index 3ddc96a06cd7..000000000000
--- a/drivers/net/wireless/intersil/orinoco/cfg.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* cfg80211 support.
- *
- * See copyright notice in main.c
- */
-#ifndef ORINOCO_CFG_H
-#define ORINOCO_CFG_H
-
-#include <net/cfg80211.h>
-
-extern const struct cfg80211_ops orinoco_cfg_ops;
-
-void orinoco_wiphy_init(struct wiphy *wiphy);
-int orinoco_wiphy_register(struct wiphy *wiphy);
-
-#endif /* ORINOCO_CFG_H */
diff --git a/drivers/net/wireless/intersil/orinoco/fw.c b/drivers/net/wireless/intersil/orinoco/fw.c
deleted file mode 100644
index 015af782881b..000000000000
--- a/drivers/net/wireless/intersil/orinoco/fw.c
+++ /dev/null
@@ -1,387 +0,0 @@
-/* Firmware file reading and download helpers
- *
- * See copyright notice in main.c
- */
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/firmware.h>
-#include <linux/device.h>
-#include <linux/module.h>
-
-#include "hermes.h"
-#include "hermes_dld.h"
-#include "orinoco.h"
-
-#include "fw.h"
-
-/* End markers (for Symbol firmware only) */
-#define TEXT_END 0x1A /* End of text header */
-
-struct fw_info {
- char *pri_fw;
- char *sta_fw;
- char *ap_fw;
- u32 pda_addr;
- u16 pda_size;
-};
-
-static const struct fw_info orinoco_fw[] = {
- { NULL, "agere_sta_fw.bin", "agere_ap_fw.bin", 0x00390000, 1000 },
- { NULL, "prism_sta_fw.bin", "prism_ap_fw.bin", 0, 1024 },
- { "symbol_sp24t_prim_fw", "symbol_sp24t_sec_fw", NULL, 0x00003100, 512 }
-};
-MODULE_FIRMWARE("agere_sta_fw.bin");
-MODULE_FIRMWARE("agere_ap_fw.bin");
-MODULE_FIRMWARE("prism_sta_fw.bin");
-MODULE_FIRMWARE("prism_ap_fw.bin");
-MODULE_FIRMWARE("symbol_sp24t_prim_fw");
-MODULE_FIRMWARE("symbol_sp24t_sec_fw");
-
-/* Structure used to access fields in FW
- * Make sure LE decoding macros are used
- */
-struct orinoco_fw_header {
- char hdr_vers[6]; /* ASCII string for header version */
- __le16 headersize; /* Total length of header */
- __le32 entry_point; /* NIC entry point */
- __le32 blocks; /* Number of blocks to program */
- __le32 block_offset; /* Offset of block data from eof header */
- __le32 pdr_offset; /* Offset to PDR data from eof header */
- __le32 pri_offset; /* Offset to primary plug data */
- __le32 compat_offset; /* Offset to compatibility data*/
- char signature[]; /* FW signature length headersize-20 */
-} __packed;
-
-/* Check the range of various header entries. Return a pointer to a
- * description of the problem, or NULL if everything checks out. */
-static const char *validate_fw(const struct orinoco_fw_header *hdr, size_t len)
-{
- u16 hdrsize;
-
- if (len < sizeof(*hdr))
- return "image too small";
- if (memcmp(hdr->hdr_vers, "HFW", 3) != 0)
- return "format not recognised";
-
- hdrsize = le16_to_cpu(hdr->headersize);
- if (hdrsize > len)
- return "bad headersize";
- if ((hdrsize + le32_to_cpu(hdr->block_offset)) > len)
- return "bad block offset";
- if ((hdrsize + le32_to_cpu(hdr->pdr_offset)) > len)
- return "bad PDR offset";
- if ((hdrsize + le32_to_cpu(hdr->pri_offset)) > len)
- return "bad PRI offset";
- if ((hdrsize + le32_to_cpu(hdr->compat_offset)) > len)
- return "bad compat offset";
-
- /* TODO: consider adding a checksum or CRC to the firmware format */
- return NULL;
-}
-
-#if defined(CONFIG_HERMES_CACHE_FW_ON_INIT) || defined(CONFIG_PM_SLEEP)
-static inline const struct firmware *
-orinoco_cached_fw_get(struct orinoco_private *priv, bool primary)
-{
- if (primary)
- return priv->cached_pri_fw;
- else
- return priv->cached_fw;
-}
-#else
-#define orinoco_cached_fw_get(priv, primary) (NULL)
-#endif
-
-/* Download either STA or AP firmware into the card. */
-static int
-orinoco_dl_firmware(struct orinoco_private *priv,
- const struct fw_info *fw,
- int ap)
-{
- /* Plug Data Area (PDA) */
- __le16 *pda;
-
- struct hermes *hw = &priv->hw;
- const struct firmware *fw_entry;
- const struct orinoco_fw_header *hdr;
- const unsigned char *first_block;
- const void *end;
- const char *firmware;
- const char *fw_err;
- struct device *dev = priv->dev;
- int err = 0;
-
- pda = kzalloc(fw->pda_size, GFP_KERNEL);
- if (!pda)
- return -ENOMEM;
-
- if (ap)
- firmware = fw->ap_fw;
- else
- firmware = fw->sta_fw;
-
- dev_dbg(dev, "Attempting to download firmware %s\n", firmware);
-
- /* Read current plug data */
- err = hw->ops->read_pda(hw, pda, fw->pda_addr, fw->pda_size);
- dev_dbg(dev, "Read PDA returned %d\n", err);
- if (err)
- goto free;
-
- if (!orinoco_cached_fw_get(priv, false)) {
- err = request_firmware(&fw_entry, firmware, priv->dev);
-
- if (err) {
- dev_err(dev, "Cannot find firmware %s\n", firmware);
- err = -ENOENT;
- goto free;
- }
- } else
- fw_entry = orinoco_cached_fw_get(priv, false);
-
- hdr = (const struct orinoco_fw_header *) fw_entry->data;
-
- fw_err = validate_fw(hdr, fw_entry->size);
- if (fw_err) {
- dev_warn(dev, "Invalid firmware image detected (%s). "
- "Aborting download\n", fw_err);
- err = -EINVAL;
- goto abort;
- }
-
- /* Enable aux port to allow programming */
- err = hw->ops->program_init(hw, le32_to_cpu(hdr->entry_point));
- dev_dbg(dev, "Program init returned %d\n", err);
- if (err != 0)
- goto abort;
-
- /* Program data */
- first_block = (fw_entry->data +
- le16_to_cpu(hdr->headersize) +
- le32_to_cpu(hdr->block_offset));
- end = fw_entry->data + fw_entry->size;
-
- err = hermes_program(hw, first_block, end);
- dev_dbg(dev, "Program returned %d\n", err);
- if (err != 0)
- goto abort;
-
- /* Update production data */
- first_block = (fw_entry->data +
- le16_to_cpu(hdr->headersize) +
- le32_to_cpu(hdr->pdr_offset));
-
- err = hermes_apply_pda_with_defaults(hw, first_block, end, pda,
- &pda[fw->pda_size / sizeof(*pda)]);
- dev_dbg(dev, "Apply PDA returned %d\n", err);
- if (err)
- goto abort;
-
- /* Tell card we've finished */
- err = hw->ops->program_end(hw);
- dev_dbg(dev, "Program end returned %d\n", err);
- if (err != 0)
- goto abort;
-
- /* Check if we're running */
- dev_dbg(dev, "hermes_present returned %d\n", hermes_present(hw));
-
-abort:
- /* If we requested the firmware, release it. */
- if (!orinoco_cached_fw_get(priv, false))
- release_firmware(fw_entry);
-
-free:
- kfree(pda);
- return err;
-}
-
-/*
- * Process a firmware image - stop the card, load the firmware, reset
- * the card and make sure it responds. For the secondary firmware take
- * care of the PDA - read it and then write it on top of the firmware.
- */
-static int
-symbol_dl_image(struct orinoco_private *priv, const struct fw_info *fw,
- const unsigned char *image, const void *end,
- int secondary)
-{
- struct hermes *hw = &priv->hw;
- int ret = 0;
- const unsigned char *ptr;
- const unsigned char *first_block;
-
- /* Plug Data Area (PDA) */
- __le16 *pda = NULL;
-
- /* Binary block begins after the 0x1A marker */
- ptr = image;
- while (*ptr++ != TEXT_END);
- first_block = ptr;
-
- /* Read the PDA from EEPROM */
- if (secondary) {
- pda = kzalloc(fw->pda_size, GFP_KERNEL);
- if (!pda)
- return -ENOMEM;
-
- ret = hw->ops->read_pda(hw, pda, fw->pda_addr, fw->pda_size);
- if (ret)
- goto free;
- }
-
- /* Stop the firmware, so that it can be safely rewritten */
- if (priv->stop_fw) {
- ret = priv->stop_fw(priv, 1);
- if (ret)
- goto free;
- }
-
- /* Program the adapter with new firmware */
- ret = hermes_program(hw, first_block, end);
- if (ret)
- goto free;
-
- /* Write the PDA to the adapter */
- if (secondary) {
- size_t len = hermes_blocks_length(first_block, end);
- ptr = first_block + len;
- ret = hermes_apply_pda(hw, ptr, end, pda,
- &pda[fw->pda_size / sizeof(*pda)]);
- kfree(pda);
- if (ret)
- return ret;
- }
-
- /* Run the firmware */
- if (priv->stop_fw) {
- ret = priv->stop_fw(priv, 0);
- if (ret)
- return ret;
- }
-
- /* Reset hermes chip and make sure it responds */
- ret = hw->ops->init(hw);
-
- /* hermes_reset() should return 0 with the secondary firmware */
- if (secondary && ret != 0)
- return -ENODEV;
-
- /* And this should work with any firmware */
- if (!hermes_present(hw))
- return -ENODEV;
-
- return 0;
-
-free:
- kfree(pda);
- return ret;
-}
-
-
-/*
- * Download the firmware into the card, this also does a PCMCIA soft
- * reset on the card, to make sure it's in a sane state.
- */
-static int
-symbol_dl_firmware(struct orinoco_private *priv,
- const struct fw_info *fw)
-{
- struct device *dev = priv->dev;
- int ret;
- const struct firmware *fw_entry;
-
- if (!orinoco_cached_fw_get(priv, true)) {
- if (request_firmware(&fw_entry, fw->pri_fw, priv->dev) != 0) {
- dev_err(dev, "Cannot find firmware: %s\n", fw->pri_fw);
- return -ENOENT;
- }
- } else
- fw_entry = orinoco_cached_fw_get(priv, true);
-
- /* Load primary firmware */
- ret = symbol_dl_image(priv, fw, fw_entry->data,
- fw_entry->data + fw_entry->size, 0);
-
- if (!orinoco_cached_fw_get(priv, true))
- release_firmware(fw_entry);
- if (ret) {
- dev_err(dev, "Primary firmware download failed\n");
- return ret;
- }
-
- if (!orinoco_cached_fw_get(priv, false)) {
- if (request_firmware(&fw_entry, fw->sta_fw, priv->dev) != 0) {
- dev_err(dev, "Cannot find firmware: %s\n", fw->sta_fw);
- return -ENOENT;
- }
- } else
- fw_entry = orinoco_cached_fw_get(priv, false);
-
- /* Load secondary firmware */
- ret = symbol_dl_image(priv, fw, fw_entry->data,
- fw_entry->data + fw_entry->size, 1);
- if (!orinoco_cached_fw_get(priv, false))
- release_firmware(fw_entry);
- if (ret)
- dev_err(dev, "Secondary firmware download failed\n");
-
- return ret;
-}
-
-int orinoco_download(struct orinoco_private *priv)
-{
- int err = 0;
- /* Reload firmware */
- switch (priv->firmware_type) {
- case FIRMWARE_TYPE_AGERE:
- /* case FIRMWARE_TYPE_INTERSIL: */
- err = orinoco_dl_firmware(priv,
- &orinoco_fw[priv->firmware_type], 0);
- break;
-
- case FIRMWARE_TYPE_SYMBOL:
- err = symbol_dl_firmware(priv,
- &orinoco_fw[priv->firmware_type]);
- break;
- case FIRMWARE_TYPE_INTERSIL:
- break;
- }
- /* TODO: if we fail we probably need to reinitialise
- * the driver */
-
- return err;
-}
-
-#if defined(CONFIG_HERMES_CACHE_FW_ON_INIT) || defined(CONFIG_PM_SLEEP)
-void orinoco_cache_fw(struct orinoco_private *priv, int ap)
-{
- const struct firmware *fw_entry = NULL;
- const char *pri_fw;
- const char *fw;
-
- pri_fw = orinoco_fw[priv->firmware_type].pri_fw;
- if (ap)
- fw = orinoco_fw[priv->firmware_type].ap_fw;
- else
- fw = orinoco_fw[priv->firmware_type].sta_fw;
-
- if (pri_fw) {
- if (request_firmware(&fw_entry, pri_fw, priv->dev) == 0)
- priv->cached_pri_fw = fw_entry;
- }
-
- if (fw) {
- if (request_firmware(&fw_entry, fw, priv->dev) == 0)
- priv->cached_fw = fw_entry;
- }
-}
-
-void orinoco_uncache_fw(struct orinoco_private *priv)
-{
- release_firmware(priv->cached_pri_fw);
- release_firmware(priv->cached_fw);
- priv->cached_pri_fw = NULL;
- priv->cached_fw = NULL;
-}
-#endif
diff --git a/drivers/net/wireless/intersil/orinoco/fw.h b/drivers/net/wireless/intersil/orinoco/fw.h
deleted file mode 100644
index aca63e3c4b5b..000000000000
--- a/drivers/net/wireless/intersil/orinoco/fw.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* Firmware file reading and download helpers
- *
- * See copyright notice in main.c
- */
-#ifndef _ORINOCO_FW_H_
-#define _ORINOCO_FW_H_
-
-/* Forward declations */
-struct orinoco_private;
-
-int orinoco_download(struct orinoco_private *priv);
-
-#if defined(CONFIG_HERMES_CACHE_FW_ON_INIT) || defined(CONFIG_PM_SLEEP)
-void orinoco_cache_fw(struct orinoco_private *priv, int ap);
-void orinoco_uncache_fw(struct orinoco_private *priv);
-#else
-#define orinoco_cache_fw(priv, ap) do { } while (0)
-#define orinoco_uncache_fw(priv) do { } while (0)
-#endif
-
-#endif /* _ORINOCO_FW_H_ */
diff --git a/drivers/net/wireless/intersil/orinoco/hermes.c b/drivers/net/wireless/intersil/orinoco/hermes.c
deleted file mode 100644
index 4888286727ff..000000000000
--- a/drivers/net/wireless/intersil/orinoco/hermes.c
+++ /dev/null
@@ -1,778 +0,0 @@
-/* hermes.c
- *
- * Driver core for the "Hermes" wireless MAC controller, as used in
- * the Lucent Orinoco and Cabletron RoamAbout cards. It should also
- * work on the hfa3841 and hfa3842 MAC controller chips used in the
- * Prism II chipsets.
- *
- * This is not a complete driver, just low-level access routines for
- * the MAC controller itself.
- *
- * Based on the prism2 driver from Absolute Value Systems' linux-wlan
- * project, the Linux wvlan_cs driver, Lucent's HCF-Light
- * (wvlan_hcf.c) library, and the NetBSD wireless driver (in no
- * particular order).
- *
- * Copyright (C) 2000, David Gibson, Linuxcare Australia.
- * (C) Copyright David Gibson, IBM Corp. 2001-2003.
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#include <linux/net.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-
-#include "hermes.h"
-
-/* These are maximum timeouts. Most often, card wil react much faster */
-#define CMD_BUSY_TIMEOUT (100) /* In iterations of ~1us */
-#define CMD_INIT_TIMEOUT (50000) /* in iterations of ~10us */
-#define CMD_COMPL_TIMEOUT (20000) /* in iterations of ~10us */
-#define ALLOC_COMPL_TIMEOUT (1000) /* in iterations of ~10us */
-
-/*
- * AUX port access. To unlock the AUX port write the access keys to the
- * PARAM0-2 registers, then write HERMES_AUX_ENABLE to the HERMES_CONTROL
- * register. Then read it and make sure it's HERMES_AUX_ENABLED.
- */
-#define HERMES_AUX_ENABLE 0x8000 /* Enable auxiliary port access */
-#define HERMES_AUX_DISABLE 0x4000 /* Disable to auxiliary port access */
-#define HERMES_AUX_ENABLED 0xC000 /* Auxiliary port is open */
-#define HERMES_AUX_DISABLED 0x0000 /* Auxiliary port is closed */
-
-#define HERMES_AUX_PW0 0xFE01
-#define HERMES_AUX_PW1 0xDC23
-#define HERMES_AUX_PW2 0xBA45
-
-/* HERMES_CMD_DOWNLD */
-#define HERMES_PROGRAM_DISABLE (0x0000 | HERMES_CMD_DOWNLD)
-#define HERMES_PROGRAM_ENABLE_VOLATILE (0x0100 | HERMES_CMD_DOWNLD)
-#define HERMES_PROGRAM_ENABLE_NON_VOLATILE (0x0200 | HERMES_CMD_DOWNLD)
-#define HERMES_PROGRAM_NON_VOLATILE (0x0300 | HERMES_CMD_DOWNLD)
-
-/*
- * Debugging helpers
- */
-
-#define DMSG(stuff...) do {printk(KERN_DEBUG "hermes @ %p: " , hw->iobase); \
- printk(stuff); } while (0)
-
-#undef HERMES_DEBUG
-#ifdef HERMES_DEBUG
-
-#define DEBUG(lvl, stuff...) if ((lvl) <= HERMES_DEBUG) DMSG(stuff)
-
-#else /* ! HERMES_DEBUG */
-
-#define DEBUG(lvl, stuff...) do { } while (0)
-
-#endif /* ! HERMES_DEBUG */
-
-static const struct hermes_ops hermes_ops_local;
-
-/*
- * Internal functions
- */
-
-/* Issue a command to the chip. Waiting for it to complete is the caller's
- problem.
-
- Returns -EBUSY if the command register is busy, 0 on success.
-
- Callable from any context.
-*/
-static int hermes_issue_cmd(struct hermes *hw, u16 cmd, u16 param0,
- u16 param1, u16 param2)
-{
- int k = CMD_BUSY_TIMEOUT;
- u16 reg;
-
- /* First wait for the command register to unbusy */
- reg = hermes_read_regn(hw, CMD);
- while ((reg & HERMES_CMD_BUSY) && k) {
- k--;
- udelay(1);
- reg = hermes_read_regn(hw, CMD);
- }
- if (reg & HERMES_CMD_BUSY)
- return -EBUSY;
-
- hermes_write_regn(hw, PARAM2, param2);
- hermes_write_regn(hw, PARAM1, param1);
- hermes_write_regn(hw, PARAM0, param0);
- hermes_write_regn(hw, CMD, cmd);
-
- return 0;
-}
-
-/*
- * Function definitions
- */
-
-/* For doing cmds that wipe the magic constant in SWSUPPORT0 */
-static int hermes_doicmd_wait(struct hermes *hw, u16 cmd,
- u16 parm0, u16 parm1, u16 parm2,
- struct hermes_response *resp)
-{
- int err = 0;
- int k;
- u16 status, reg;
-
- err = hermes_issue_cmd(hw, cmd, parm0, parm1, parm2);
- if (err)
- return err;
-
- reg = hermes_read_regn(hw, EVSTAT);
- k = CMD_INIT_TIMEOUT;
- while ((!(reg & HERMES_EV_CMD)) && k) {
- k--;
- udelay(10);
- reg = hermes_read_regn(hw, EVSTAT);
- }
-
- hermes_write_regn(hw, SWSUPPORT0, HERMES_MAGIC);
-
- if (!hermes_present(hw)) {
- DEBUG(0, "hermes @ 0x%x: Card removed during reset.\n",
- hw->iobase);
- err = -ENODEV;
- goto out;
- }
-
- if (!(reg & HERMES_EV_CMD)) {
- printk(KERN_ERR "hermes @ %p: "
- "Timeout waiting for card to reset (reg=0x%04x)!\n",
- hw->iobase, reg);
- err = -ETIMEDOUT;
- goto out;
- }
-
- status = hermes_read_regn(hw, STATUS);
- if (resp) {
- resp->status = status;
- resp->resp0 = hermes_read_regn(hw, RESP0);
- resp->resp1 = hermes_read_regn(hw, RESP1);
- resp->resp2 = hermes_read_regn(hw, RESP2);
- }
-
- hermes_write_regn(hw, EVACK, HERMES_EV_CMD);
-
- if (status & HERMES_STATUS_RESULT)
- err = -EIO;
-out:
- return err;
-}
-
-void hermes_struct_init(struct hermes *hw, void __iomem *address,
- int reg_spacing)
-{
- hw->iobase = address;
- hw->reg_spacing = reg_spacing;
- hw->inten = 0x0;
- hw->eeprom_pda = false;
- hw->ops = &hermes_ops_local;
-}
-EXPORT_SYMBOL(hermes_struct_init);
-
-static int hermes_init(struct hermes *hw)
-{
- u16 reg;
- int err = 0;
- int k;
-
- /* We don't want to be interrupted while resetting the chipset */
- hw->inten = 0x0;
- hermes_write_regn(hw, INTEN, 0);
- hermes_write_regn(hw, EVACK, 0xffff);
-
- /* Normally it's a "can't happen" for the command register to
- be busy when we go to issue a command because we are
- serializing all commands. However we want to have some
- chance of resetting the card even if it gets into a stupid
- state, so we actually wait to see if the command register
- will unbusy itself here. */
- k = CMD_BUSY_TIMEOUT;
- reg = hermes_read_regn(hw, CMD);
- while (k && (reg & HERMES_CMD_BUSY)) {
- if (reg == 0xffff) /* Special case - the card has probably been
- removed, so don't wait for the timeout */
- return -ENODEV;
-
- k--;
- udelay(1);
- reg = hermes_read_regn(hw, CMD);
- }
-
- /* No need to explicitly handle the timeout - if we've timed
- out hermes_issue_cmd() will probably return -EBUSY below */
-
- /* According to the documentation, EVSTAT may contain
- obsolete event occurrence information. We have to acknowledge
- it by writing EVACK. */
- reg = hermes_read_regn(hw, EVSTAT);
- hermes_write_regn(hw, EVACK, reg);
-
- /* We don't use hermes_docmd_wait here, because the reset wipes
- the magic constant in SWSUPPORT0 away, and it gets confused */
- err = hermes_doicmd_wait(hw, HERMES_CMD_INIT, 0, 0, 0, NULL);
-
- return err;
-}
-
-/* Issue a command to the chip, and (busy!) wait for it to
- * complete.
- *
- * Returns:
- * < 0 on internal error
- * 0 on success
- * > 0 on error returned by the firmware
- *
- * Callable from any context, but locking is your problem. */
-static int hermes_docmd_wait(struct hermes *hw, u16 cmd, u16 parm0,
- struct hermes_response *resp)
-{
- int err;
- int k;
- u16 reg;
- u16 status;
-
- err = hermes_issue_cmd(hw, cmd, parm0, 0, 0);
- if (err) {
- if (!hermes_present(hw)) {
- if (net_ratelimit())
- printk(KERN_WARNING "hermes @ %p: "
- "Card removed while issuing command "
- "0x%04x.\n", hw->iobase, cmd);
- err = -ENODEV;
- } else
- if (net_ratelimit())
- printk(KERN_ERR "hermes @ %p: "
- "Error %d issuing command 0x%04x.\n",
- hw->iobase, err, cmd);
- goto out;
- }
-
- reg = hermes_read_regn(hw, EVSTAT);
- k = CMD_COMPL_TIMEOUT;
- while ((!(reg & HERMES_EV_CMD)) && k) {
- k--;
- udelay(10);
- reg = hermes_read_regn(hw, EVSTAT);
- }
-
- if (!hermes_present(hw)) {
- printk(KERN_WARNING "hermes @ %p: Card removed "
- "while waiting for command 0x%04x completion.\n",
- hw->iobase, cmd);
- err = -ENODEV;
- goto out;
- }
-
- if (!(reg & HERMES_EV_CMD)) {
- printk(KERN_ERR "hermes @ %p: Timeout waiting for "
- "command 0x%04x completion.\n", hw->iobase, cmd);
- err = -ETIMEDOUT;
- goto out;
- }
-
- status = hermes_read_regn(hw, STATUS);
- if (resp) {
- resp->status = status;
- resp->resp0 = hermes_read_regn(hw, RESP0);
- resp->resp1 = hermes_read_regn(hw, RESP1);
- resp->resp2 = hermes_read_regn(hw, RESP2);
- }
-
- hermes_write_regn(hw, EVACK, HERMES_EV_CMD);
-
- if (status & HERMES_STATUS_RESULT)
- err = -EIO;
-
- out:
- return err;
-}
-
-static int hermes_allocate(struct hermes *hw, u16 size, u16 *fid)
-{
- int err = 0;
- int k;
- u16 reg;
-
- if ((size < HERMES_ALLOC_LEN_MIN) || (size > HERMES_ALLOC_LEN_MAX))
- return -EINVAL;
-
- err = hermes_docmd_wait(hw, HERMES_CMD_ALLOC, size, NULL);
- if (err)
- return err;
-
- reg = hermes_read_regn(hw, EVSTAT);
- k = ALLOC_COMPL_TIMEOUT;
- while ((!(reg & HERMES_EV_ALLOC)) && k) {
- k--;
- udelay(10);
- reg = hermes_read_regn(hw, EVSTAT);
- }
-
- if (!hermes_present(hw)) {
- printk(KERN_WARNING "hermes @ %p: "
- "Card removed waiting for frame allocation.\n",
- hw->iobase);
- return -ENODEV;
- }
-
- if (!(reg & HERMES_EV_ALLOC)) {
- printk(KERN_ERR "hermes @ %p: "
- "Timeout waiting for frame allocation\n",
- hw->iobase);
- return -ETIMEDOUT;
- }
-
- *fid = hermes_read_regn(hw, ALLOCFID);
- hermes_write_regn(hw, EVACK, HERMES_EV_ALLOC);
-
- return 0;
-}
-
-/* Set up a BAP to read a particular chunk of data from card's internal buffer.
- *
- * Returns:
- * < 0 on internal failure (errno)
- * 0 on success
- * > 0 on error
- * from firmware
- *
- * Callable from any context */
-static int hermes_bap_seek(struct hermes *hw, int bap, u16 id, u16 offset)
-{
- int sreg = bap ? HERMES_SELECT1 : HERMES_SELECT0;
- int oreg = bap ? HERMES_OFFSET1 : HERMES_OFFSET0;
- int k;
- u16 reg;
-
- /* Paranoia.. */
- if ((offset > HERMES_BAP_OFFSET_MAX) || (offset % 2))
- return -EINVAL;
-
- k = HERMES_BAP_BUSY_TIMEOUT;
- reg = hermes_read_reg(hw, oreg);
- while ((reg & HERMES_OFFSET_BUSY) && k) {
- k--;
- udelay(1);
- reg = hermes_read_reg(hw, oreg);
- }
-
- if (reg & HERMES_OFFSET_BUSY)
- return -ETIMEDOUT;
-
- /* Now we actually set up the transfer */
- hermes_write_reg(hw, sreg, id);
- hermes_write_reg(hw, oreg, offset);
-
- /* Wait for the BAP to be ready */
- k = HERMES_BAP_BUSY_TIMEOUT;
- reg = hermes_read_reg(hw, oreg);
- while ((reg & (HERMES_OFFSET_BUSY | HERMES_OFFSET_ERR)) && k) {
- k--;
- udelay(1);
- reg = hermes_read_reg(hw, oreg);
- }
-
- if (reg != offset) {
- printk(KERN_ERR "hermes @ %p: BAP%d offset %s: "
- "reg=0x%x id=0x%x offset=0x%x\n", hw->iobase, bap,
- (reg & HERMES_OFFSET_BUSY) ? "timeout" : "error",
- reg, id, offset);
-
- if (reg & HERMES_OFFSET_BUSY)
- return -ETIMEDOUT;
-
- return -EIO; /* error or wrong offset */
- }
-
- return 0;
-}
-
-/* Read a block of data from the chip's buffer, via the
- * BAP. Synchronization/serialization is the caller's problem. len
- * must be even.
- *
- * Returns:
- * < 0 on internal failure (errno)
- * 0 on success
- * > 0 on error from firmware
- */
-static int hermes_bap_pread(struct hermes *hw, int bap, void *buf, int len,
- u16 id, u16 offset)
-{
- int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
- int err = 0;
-
- if ((len < 0) || (len % 2))
- return -EINVAL;
-
- err = hermes_bap_seek(hw, bap, id, offset);
- if (err)
- goto out;
-
- /* Actually do the transfer */
- hermes_read_words(hw, dreg, buf, len / 2);
-
- out:
- return err;
-}
-
-/* Write a block of data to the chip's buffer, via the
- * BAP. Synchronization/serialization is the caller's problem.
- *
- * Returns:
- * < 0 on internal failure (errno)
- * 0 on success
- * > 0 on error from firmware
- */
-static int hermes_bap_pwrite(struct hermes *hw, int bap, const void *buf,
- int len, u16 id, u16 offset)
-{
- int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
- int err = 0;
-
- if (len < 0)
- return -EINVAL;
-
- err = hermes_bap_seek(hw, bap, id, offset);
- if (err)
- goto out;
-
- /* Actually do the transfer */
- hermes_write_bytes(hw, dreg, buf, len);
-
- out:
- return err;
-}
-
-/* Read a Length-Type-Value record from the card.
- *
- * If length is NULL, we ignore the length read from the card, and
- * read the entire buffer regardless. This is useful because some of
- * the configuration records appear to have incorrect lengths in
- * practice.
- *
- * Callable from user or bh context. */
-static int hermes_read_ltv(struct hermes *hw, int bap, u16 rid,
- unsigned bufsize, u16 *length, void *buf)
-{
- int err = 0;
- int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
- u16 rlength, rtype;
- unsigned nwords;
-
- if (bufsize % 2)
- return -EINVAL;
-
- err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS, rid, NULL);
- if (err)
- return err;
-
- err = hermes_bap_seek(hw, bap, rid, 0);
- if (err)
- return err;
-
- rlength = hermes_read_reg(hw, dreg);
-
- if (!rlength)
- return -ENODATA;
-
- rtype = hermes_read_reg(hw, dreg);
-
- if (length)
- *length = rlength;
-
- if (rtype != rid)
- printk(KERN_WARNING "hermes @ %p: %s(): "
- "rid (0x%04x) does not match type (0x%04x)\n",
- hw->iobase, __func__, rid, rtype);
- if (HERMES_RECLEN_TO_BYTES(rlength) > bufsize)
- printk(KERN_WARNING "hermes @ %p: "
- "Truncating LTV record from %d to %d bytes. "
- "(rid=0x%04x, len=0x%04x)\n", hw->iobase,
- HERMES_RECLEN_TO_BYTES(rlength), bufsize, rid, rlength);
-
- nwords = min((unsigned)rlength - 1, bufsize / 2);
- hermes_read_words(hw, dreg, buf, nwords);
-
- return 0;
-}
-
-static int hermes_write_ltv(struct hermes *hw, int bap, u16 rid,
- u16 length, const void *value)
-{
- int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
- int err = 0;
- unsigned count;
-
- if (length == 0)
- return -EINVAL;
-
- err = hermes_bap_seek(hw, bap, rid, 0);
- if (err)
- return err;
-
- hermes_write_reg(hw, dreg, length);
- hermes_write_reg(hw, dreg, rid);
-
- count = length - 1;
-
- hermes_write_bytes(hw, dreg, value, count << 1);
-
- err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS | HERMES_CMD_WRITE,
- rid, NULL);
-
- return err;
-}
-
-/*** Hermes AUX control ***/
-
-static inline void
-hermes_aux_setaddr(struct hermes *hw, u32 addr)
-{
- hermes_write_reg(hw, HERMES_AUXPAGE, (u16) (addr >> 7));
- hermes_write_reg(hw, HERMES_AUXOFFSET, (u16) (addr & 0x7F));
-}
-
-static inline int
-hermes_aux_control(struct hermes *hw, int enabled)
-{
- int desired_state = enabled ? HERMES_AUX_ENABLED : HERMES_AUX_DISABLED;
- int action = enabled ? HERMES_AUX_ENABLE : HERMES_AUX_DISABLE;
- int i;
-
- /* Already open? */
- if (hermes_read_reg(hw, HERMES_CONTROL) == desired_state)
- return 0;
-
- hermes_write_reg(hw, HERMES_PARAM0, HERMES_AUX_PW0);
- hermes_write_reg(hw, HERMES_PARAM1, HERMES_AUX_PW1);
- hermes_write_reg(hw, HERMES_PARAM2, HERMES_AUX_PW2);
- hermes_write_reg(hw, HERMES_CONTROL, action);
-
- for (i = 0; i < 20; i++) {
- udelay(10);
- if (hermes_read_reg(hw, HERMES_CONTROL) ==
- desired_state)
- return 0;
- }
-
- return -EBUSY;
-}
-
-/*** Hermes programming ***/
-
-/* About to start programming data (Hermes I)
- * offset is the entry point
- *
- * Spectrum_cs' Symbol fw does not require this
- * wl_lkm Agere fw does
- * Don't know about intersil
- */
-static int hermesi_program_init(struct hermes *hw, u32 offset)
-{
- int err;
-
- /* Disable interrupts?*/
- /*hw->inten = 0x0;*/
- /*hermes_write_regn(hw, INTEN, 0);*/
- /*hermes_set_irqmask(hw, 0);*/
-
- /* Acknowledge any outstanding command */
- hermes_write_regn(hw, EVACK, 0xFFFF);
-
- /* Using init_cmd_wait rather than cmd_wait */
- err = hw->ops->init_cmd_wait(hw,
- 0x0100 | HERMES_CMD_INIT,
- 0, 0, 0, NULL);
- if (err)
- return err;
-
- err = hw->ops->init_cmd_wait(hw,
- 0x0000 | HERMES_CMD_INIT,
- 0, 0, 0, NULL);
- if (err)
- return err;
-
- err = hermes_aux_control(hw, 1);
- pr_debug("AUX enable returned %d\n", err);
-
- if (err)
- return err;
-
- pr_debug("Enabling volatile, EP 0x%08x\n", offset);
- err = hw->ops->init_cmd_wait(hw,
- HERMES_PROGRAM_ENABLE_VOLATILE,
- offset & 0xFFFFu,
- offset >> 16,
- 0,
- NULL);
- pr_debug("PROGRAM_ENABLE returned %d\n", err);
-
- return err;
-}
-
-/* Done programming data (Hermes I)
- *
- * Spectrum_cs' Symbol fw does not require this
- * wl_lkm Agere fw does
- * Don't know about intersil
- */
-static int hermesi_program_end(struct hermes *hw)
-{
- struct hermes_response resp;
- int rc = 0;
- int err;
-
- rc = hw->ops->cmd_wait(hw, HERMES_PROGRAM_DISABLE, 0, &resp);
-
- pr_debug("PROGRAM_DISABLE returned %d, "
- "r0 0x%04x, r1 0x%04x, r2 0x%04x\n",
- rc, resp.resp0, resp.resp1, resp.resp2);
-
- if ((rc == 0) &&
- ((resp.status & HERMES_STATUS_CMDCODE) != HERMES_CMD_DOWNLD))
- rc = -EIO;
-
- err = hermes_aux_control(hw, 0);
- pr_debug("AUX disable returned %d\n", err);
-
- /* Acknowledge any outstanding command */
- hermes_write_regn(hw, EVACK, 0xFFFF);
-
- /* Reinitialise, ignoring return */
- (void) hw->ops->init_cmd_wait(hw, 0x0000 | HERMES_CMD_INIT,
- 0, 0, 0, NULL);
-
- return rc ? rc : err;
-}
-
-static int hermes_program_bytes(struct hermes *hw, const char *data,
- u32 addr, u32 len)
-{
- /* wl lkm splits the programming into chunks of 2000 bytes.
- * This restriction appears to come from USB. The PCMCIA
- * adapters can program the whole lot in one go */
- hermes_aux_setaddr(hw, addr);
- hermes_write_bytes(hw, HERMES_AUXDATA, data, len);
- return 0;
-}
-
-/* Read PDA from the adapter */
-static int hermes_read_pda(struct hermes *hw, __le16 *pda, u32 pda_addr,
- u16 pda_len)
-{
- int ret;
- u16 pda_size;
- u16 data_len = pda_len;
- __le16 *data = pda;
-
- if (hw->eeprom_pda) {
- /* PDA of spectrum symbol is in eeprom */
-
- /* Issue command to read EEPROM */
- ret = hw->ops->cmd_wait(hw, HERMES_CMD_READMIF, 0, NULL);
- if (ret)
- return ret;
- } else {
- /* wl_lkm does not include PDA size in the PDA area.
- * We will pad the information into pda, so other routines
- * don't have to be modified */
- pda[0] = cpu_to_le16(pda_len - 2);
- /* Includes CFG_PROD_DATA but not itself */
- pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */
- data_len = pda_len - 4;
- data = pda + 2;
- }
-
- /* Open auxiliary port */
- ret = hermes_aux_control(hw, 1);
- pr_debug("AUX enable returned %d\n", ret);
- if (ret)
- return ret;
-
- /* Read PDA */
- hermes_aux_setaddr(hw, pda_addr);
- hermes_read_words(hw, HERMES_AUXDATA, data, data_len / 2);
-
- /* Close aux port */
- ret = hermes_aux_control(hw, 0);
- pr_debug("AUX disable returned %d\n", ret);
-
- /* Check PDA length */
- pda_size = le16_to_cpu(pda[0]);
- pr_debug("Actual PDA length %d, Max allowed %d\n",
- pda_size, pda_len);
- if (pda_size > pda_len)
- return -EINVAL;
-
- return 0;
-}
-
-static void hermes_lock_irqsave(spinlock_t *lock,
- unsigned long *flags) __acquires(lock)
-{
- spin_lock_irqsave(lock, *flags);
-}
-
-static void hermes_unlock_irqrestore(spinlock_t *lock,
- unsigned long *flags) __releases(lock)
-{
- spin_unlock_irqrestore(lock, *flags);
-}
-
-static void hermes_lock_irq(spinlock_t *lock) __acquires(lock)
-{
- spin_lock_irq(lock);
-}
-
-static void hermes_unlock_irq(spinlock_t *lock) __releases(lock)
-{
- spin_unlock_irq(lock);
-}
-
-/* Hermes operations for local buses */
-static const struct hermes_ops hermes_ops_local = {
- .init = hermes_init,
- .cmd_wait = hermes_docmd_wait,
- .init_cmd_wait = hermes_doicmd_wait,
- .allocate = hermes_allocate,
- .read_ltv = hermes_read_ltv,
- .read_ltv_pr = hermes_read_ltv,
- .write_ltv = hermes_write_ltv,
- .bap_pread = hermes_bap_pread,
- .bap_pwrite = hermes_bap_pwrite,
- .read_pda = hermes_read_pda,
- .program_init = hermesi_program_init,
- .program_end = hermesi_program_end,
- .program = hermes_program_bytes,
- .lock_irqsave = hermes_lock_irqsave,
- .unlock_irqrestore = hermes_unlock_irqrestore,
- .lock_irq = hermes_lock_irq,
- .unlock_irq = hermes_unlock_irq,
-};
diff --git a/drivers/net/wireless/intersil/orinoco/hermes.h b/drivers/net/wireless/intersil/orinoco/hermes.h
deleted file mode 100644
index 3dc561a5cb7a..000000000000
--- a/drivers/net/wireless/intersil/orinoco/hermes.h
+++ /dev/null
@@ -1,534 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/* hermes.h
- *
- * Driver core for the "Hermes" wireless MAC controller, as used in
- * the Lucent Orinoco and Cabletron RoamAbout cards. It should also
- * work on the hfa3841 and hfa3842 MAC controller chips used in the
- * Prism I & II chipsets.
- *
- * This is not a complete driver, just low-level access routines for
- * the MAC controller itself.
- *
- * Based on the prism2 driver from Absolute Value Systems' linux-wlan
- * project, the Linux wvlan_cs driver, Lucent's HCF-Light
- * (wvlan_hcf.c) library, and the NetBSD wireless driver.
- *
- * Copyright (C) 2000, David Gibson, Linuxcare Australia.
- * (C) Copyright David Gibson, IBM Corp. 2001-2003.
- *
- * Portions taken from hfa384x.h.
- * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
- */
-
-#ifndef _HERMES_H
-#define _HERMES_H
-
-/* Notes on locking:
- *
- * As a module of low level hardware access routines, there is no
- * locking. Users of this module should ensure that they serialize
- * access to the hermes structure, and to the hardware
-*/
-
-#include <linux/if_ether.h>
-#include <linux/io.h>
-
-/*
- * Limits and constants
- */
-#define HERMES_ALLOC_LEN_MIN (4)
-#define HERMES_ALLOC_LEN_MAX (2400)
-#define HERMES_LTV_LEN_MAX (34)
-#define HERMES_BAP_DATALEN_MAX (4096)
-#define HERMES_BAP_OFFSET_MAX (4096)
-#define HERMES_PORTID_MAX (7)
-#define HERMES_NUMPORTS_MAX (HERMES_PORTID_MAX + 1)
-#define HERMES_PDR_LEN_MAX (260) /* in bytes, from EK */
-#define HERMES_PDA_RECS_MAX (200) /* a guess */
-#define HERMES_PDA_LEN_MAX (1024) /* in bytes, from EK */
-#define HERMES_SCANRESULT_MAX (35)
-#define HERMES_CHINFORESULT_MAX (8)
-#define HERMES_MAX_MULTICAST (16)
-#define HERMES_MAGIC (0x7d1f)
-
-/*
- * Hermes register offsets
- */
-#define HERMES_CMD (0x00)
-#define HERMES_PARAM0 (0x02)
-#define HERMES_PARAM1 (0x04)
-#define HERMES_PARAM2 (0x06)
-#define HERMES_STATUS (0x08)
-#define HERMES_RESP0 (0x0A)
-#define HERMES_RESP1 (0x0C)
-#define HERMES_RESP2 (0x0E)
-#define HERMES_INFOFID (0x10)
-#define HERMES_RXFID (0x20)
-#define HERMES_ALLOCFID (0x22)
-#define HERMES_TXCOMPLFID (0x24)
-#define HERMES_SELECT0 (0x18)
-#define HERMES_OFFSET0 (0x1C)
-#define HERMES_DATA0 (0x36)
-#define HERMES_SELECT1 (0x1A)
-#define HERMES_OFFSET1 (0x1E)
-#define HERMES_DATA1 (0x38)
-#define HERMES_EVSTAT (0x30)
-#define HERMES_INTEN (0x32)
-#define HERMES_EVACK (0x34)
-#define HERMES_CONTROL (0x14)
-#define HERMES_SWSUPPORT0 (0x28)
-#define HERMES_SWSUPPORT1 (0x2A)
-#define HERMES_SWSUPPORT2 (0x2C)
-#define HERMES_AUXPAGE (0x3A)
-#define HERMES_AUXOFFSET (0x3C)
-#define HERMES_AUXDATA (0x3E)
-
-/*
- * CMD register bitmasks
- */
-#define HERMES_CMD_BUSY (0x8000)
-#define HERMES_CMD_AINFO (0x7f00)
-#define HERMES_CMD_MACPORT (0x0700)
-#define HERMES_CMD_RECL (0x0100)
-#define HERMES_CMD_WRITE (0x0100)
-#define HERMES_CMD_PROGMODE (0x0300)
-#define HERMES_CMD_CMDCODE (0x003f)
-
-/*
- * STATUS register bitmasks
- */
-#define HERMES_STATUS_RESULT (0x7f00)
-#define HERMES_STATUS_CMDCODE (0x003f)
-
-/*
- * OFFSET register bitmasks
- */
-#define HERMES_OFFSET_BUSY (0x8000)
-#define HERMES_OFFSET_ERR (0x4000)
-#define HERMES_OFFSET_DATAOFF (0x0ffe)
-
-/*
- * Event register bitmasks (INTEN, EVSTAT, EVACK)
- */
-#define HERMES_EV_TICK (0x8000)
-#define HERMES_EV_WTERR (0x4000)
-#define HERMES_EV_INFDROP (0x2000)
-#define HERMES_EV_INFO (0x0080)
-#define HERMES_EV_DTIM (0x0020)
-#define HERMES_EV_CMD (0x0010)
-#define HERMES_EV_ALLOC (0x0008)
-#define HERMES_EV_TXEXC (0x0004)
-#define HERMES_EV_TX (0x0002)
-#define HERMES_EV_RX (0x0001)
-
-/*
- * Command codes
- */
-/*--- Controller Commands ----------------------------*/
-#define HERMES_CMD_INIT (0x0000)
-#define HERMES_CMD_ENABLE (0x0001)
-#define HERMES_CMD_DISABLE (0x0002)
-#define HERMES_CMD_DIAG (0x0003)
-
-/*--- Buffer Mgmt Commands ---------------------------*/
-#define HERMES_CMD_ALLOC (0x000A)
-#define HERMES_CMD_TX (0x000B)
-
-/*--- Regulate Commands ------------------------------*/
-#define HERMES_CMD_NOTIFY (0x0010)
-#define HERMES_CMD_INQUIRE (0x0011)
-
-/*--- Configure Commands -----------------------------*/
-#define HERMES_CMD_ACCESS (0x0021)
-#define HERMES_CMD_DOWNLD (0x0022)
-
-/*--- Serial I/O Commands ----------------------------*/
-#define HERMES_CMD_READMIF (0x0030)
-#define HERMES_CMD_WRITEMIF (0x0031)
-
-/*--- Debugging Commands -----------------------------*/
-#define HERMES_CMD_TEST (0x0038)
-
-
-/* Test command arguments */
-#define HERMES_TEST_SET_CHANNEL 0x0800
-#define HERMES_TEST_MONITOR 0x0b00
-#define HERMES_TEST_STOP 0x0f00
-
-/* Authentication algorithms */
-#define HERMES_AUTH_OPEN 1
-#define HERMES_AUTH_SHARED_KEY 2
-
-/* WEP settings */
-#define HERMES_WEP_PRIVACY_INVOKED 0x0001
-#define HERMES_WEP_EXCL_UNENCRYPTED 0x0002
-#define HERMES_WEP_HOST_ENCRYPT 0x0010
-#define HERMES_WEP_HOST_DECRYPT 0x0080
-
-/* Symbol hostscan options */
-#define HERMES_HOSTSCAN_SYMBOL_5SEC 0x0001
-#define HERMES_HOSTSCAN_SYMBOL_ONCE 0x0002
-#define HERMES_HOSTSCAN_SYMBOL_PASSIVE 0x0040
-#define HERMES_HOSTSCAN_SYMBOL_BCAST 0x0080
-
-/*
- * Frame structures and constants
- */
-
-#define HERMES_DESCRIPTOR_OFFSET 0
-#define HERMES_802_11_OFFSET (14)
-#define HERMES_802_3_OFFSET (14 + 32)
-#define HERMES_802_2_OFFSET (14 + 32 + 14)
-#define HERMES_TXCNTL2_OFFSET (HERMES_802_3_OFFSET - 2)
-
-#define HERMES_RXSTAT_ERR (0x0003)
-#define HERMES_RXSTAT_BADCRC (0x0001)
-#define HERMES_RXSTAT_UNDECRYPTABLE (0x0002)
-#define HERMES_RXSTAT_MIC (0x0010) /* Frame contains MIC */
-#define HERMES_RXSTAT_MACPORT (0x0700)
-#define HERMES_RXSTAT_PCF (0x1000) /* Frame was received in CF period */
-#define HERMES_RXSTAT_MIC_KEY_ID (0x1800) /* MIC key used */
-#define HERMES_RXSTAT_MSGTYPE (0xE000)
-#define HERMES_RXSTAT_1042 (0x2000) /* RFC-1042 frame */
-#define HERMES_RXSTAT_TUNNEL (0x4000) /* bridge-tunnel encoded frame */
-#define HERMES_RXSTAT_WMP (0x6000) /* Wavelan-II Management Protocol frame */
-
-/* Shift amount for key ID in RXSTAT and TXCTRL */
-#define HERMES_MIC_KEY_ID_SHIFT 11
-
-struct hermes_tx_descriptor {
- __le16 status;
- __le16 reserved1;
- __le16 reserved2;
- __le32 sw_support;
- u8 retry_count;
- u8 tx_rate;
- __le16 tx_control;
-} __packed;
-
-#define HERMES_TXSTAT_RETRYERR (0x0001)
-#define HERMES_TXSTAT_AGEDERR (0x0002)
-#define HERMES_TXSTAT_DISCON (0x0004)
-#define HERMES_TXSTAT_FORMERR (0x0008)
-
-#define HERMES_TXCTRL_TX_OK (0x0002) /* ?? interrupt on Tx complete */
-#define HERMES_TXCTRL_TX_EX (0x0004) /* ?? interrupt on Tx exception */
-#define HERMES_TXCTRL_802_11 (0x0008) /* We supply 802.11 header */
-#define HERMES_TXCTRL_MIC (0x0010) /* 802.3 + TKIP */
-#define HERMES_TXCTRL_MIC_KEY_ID (0x1800) /* MIC Key ID mask */
-#define HERMES_TXCTRL_ALT_RTRY (0x0020)
-
-/* Inquiry constants and data types */
-
-#define HERMES_INQ_TALLIES (0xF100)
-#define HERMES_INQ_SCAN (0xF101)
-#define HERMES_INQ_CHANNELINFO (0xF102)
-#define HERMES_INQ_HOSTSCAN (0xF103)
-#define HERMES_INQ_HOSTSCAN_SYMBOL (0xF104)
-#define HERMES_INQ_LINKSTATUS (0xF200)
-#define HERMES_INQ_SEC_STAT_AGERE (0xF202)
-
-struct hermes_tallies_frame {
- __le16 TxUnicastFrames;
- __le16 TxMulticastFrames;
- __le16 TxFragments;
- __le16 TxUnicastOctets;
- __le16 TxMulticastOctets;
- __le16 TxDeferredTransmissions;
- __le16 TxSingleRetryFrames;
- __le16 TxMultipleRetryFrames;
- __le16 TxRetryLimitExceeded;
- __le16 TxDiscards;
- __le16 RxUnicastFrames;
- __le16 RxMulticastFrames;
- __le16 RxFragments;
- __le16 RxUnicastOctets;
- __le16 RxMulticastOctets;
- __le16 RxFCSErrors;
- __le16 RxDiscards_NoBuffer;
- __le16 TxDiscardsWrongSA;
- __le16 RxWEPUndecryptable;
- __le16 RxMsgInMsgFragments;
- __le16 RxMsgInBadMsgFragments;
- /* Those last are probably not available in very old firmwares */
- __le16 RxDiscards_WEPICVError;
- __le16 RxDiscards_WEPExcluded;
-} __packed;
-
-/* Grabbed from wlan-ng - Thanks Mark... - Jean II
- * This is the result of a scan inquiry command */
-/* Structure describing info about an Access Point */
-struct prism2_scan_apinfo {
- __le16 channel; /* Channel where the AP sits */
- __le16 noise; /* Noise level */
- __le16 level; /* Signal level */
- u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */
- __le16 beacon_interv; /* Beacon interval */
- __le16 capabilities; /* Capabilities */
- __le16 essid_len; /* ESSID length */
- u8 essid[32]; /* ESSID of the network */
- u8 rates[10]; /* Bit rate supported */
- __le16 proberesp_rate; /* Data rate of the response frame */
- __le16 atim; /* ATIM window time, Kus (hostscan only) */
-} __packed;
-
-/* Same stuff for the Lucent/Agere card.
- * Thanks to h1kari <h1kari AT dachb0den.com> - Jean II */
-struct agere_scan_apinfo {
- __le16 channel; /* Channel where the AP sits */
- __le16 noise; /* Noise level */
- __le16 level; /* Signal level */
- u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */
- __le16 beacon_interv; /* Beacon interval */
- __le16 capabilities; /* Capabilities */
- /* bits: 0-ess, 1-ibss, 4-privacy [wep] */
- __le16 essid_len; /* ESSID length */
- u8 essid[32]; /* ESSID of the network */
-} __packed;
-
-/* Moustafa: Scan structure for Symbol cards */
-struct symbol_scan_apinfo {
- u8 channel; /* Channel where the AP sits */
- u8 unknown1; /* 8 in 2.9x and 3.9x f/w, 0 otherwise */
- __le16 noise; /* Noise level */
- __le16 level; /* Signal level */
- u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */
- __le16 beacon_interv; /* Beacon interval */
- __le16 capabilities; /* Capabilities */
- /* bits: 0-ess, 1-ibss, 4-privacy [wep] */
- __le16 essid_len; /* ESSID length */
- u8 essid[32]; /* ESSID of the network */
- __le16 rates[5]; /* Bit rate supported */
- __le16 basic_rates; /* Basic rates bitmask */
- u8 unknown2[6]; /* Always FF:FF:FF:FF:00:00 */
- u8 unknown3[8]; /* Always 0, appeared in f/w 3.91-68 */
-} __packed;
-
-union hermes_scan_info {
- struct agere_scan_apinfo a;
- struct prism2_scan_apinfo p;
- struct symbol_scan_apinfo s;
-};
-
-/* Extended scan struct for HERMES_INQ_CHANNELINFO.
- * wl_lkm calls this an ACS scan (Automatic Channel Select).
- * Keep out of union hermes_scan_info because it is much bigger than
- * the older scan structures. */
-struct agere_ext_scan_info {
- __le16 reserved0;
-
- u8 noise;
- u8 level;
- u8 rx_flow;
- u8 rate;
- __le16 reserved1[2];
-
- __le16 frame_control;
- __le16 dur_id;
- u8 addr1[ETH_ALEN];
- u8 addr2[ETH_ALEN];
- u8 bssid[ETH_ALEN];
- __le16 sequence;
- u8 addr4[ETH_ALEN];
-
- __le16 data_length;
-
- /* Next 3 fields do not get filled in. */
- u8 daddr[ETH_ALEN];
- u8 saddr[ETH_ALEN];
- __le16 len_type;
-
- __le64 timestamp;
- __le16 beacon_interval;
- __le16 capabilities;
- u8 data[];
-} __packed;
-
-#define HERMES_LINKSTATUS_NOT_CONNECTED (0x0000)
-#define HERMES_LINKSTATUS_CONNECTED (0x0001)
-#define HERMES_LINKSTATUS_DISCONNECTED (0x0002)
-#define HERMES_LINKSTATUS_AP_CHANGE (0x0003)
-#define HERMES_LINKSTATUS_AP_OUT_OF_RANGE (0x0004)
-#define HERMES_LINKSTATUS_AP_IN_RANGE (0x0005)
-#define HERMES_LINKSTATUS_ASSOC_FAILED (0x0006)
-
-struct hermes_linkstatus {
- __le16 linkstatus; /* Link status */
-} __packed;
-
-struct hermes_response {
- u16 status, resp0, resp1, resp2;
-};
-
-/* "ID" structure - used for ESSID and station nickname */
-struct hermes_idstring {
- __le16 len;
- __le16 val[16];
-} __packed;
-
-struct hermes_multicast {
- u8 addr[HERMES_MAX_MULTICAST][ETH_ALEN];
-} __packed;
-
-/* Timeouts */
-#define HERMES_BAP_BUSY_TIMEOUT (10000) /* In iterations of ~1us */
-
-struct hermes;
-
-/* Functions to access hardware */
-struct hermes_ops {
- int (*init)(struct hermes *hw);
- int (*cmd_wait)(struct hermes *hw, u16 cmd, u16 parm0,
- struct hermes_response *resp);
- int (*init_cmd_wait)(struct hermes *hw, u16 cmd,
- u16 parm0, u16 parm1, u16 parm2,
- struct hermes_response *resp);
- int (*allocate)(struct hermes *hw, u16 size, u16 *fid);
- int (*read_ltv)(struct hermes *hw, int bap, u16 rid, unsigned buflen,
- u16 *length, void *buf);
- int (*read_ltv_pr)(struct hermes *hw, int bap, u16 rid,
- unsigned buflen, u16 *length, void *buf);
- int (*write_ltv)(struct hermes *hw, int bap, u16 rid,
- u16 length, const void *value);
- int (*bap_pread)(struct hermes *hw, int bap, void *buf, int len,
- u16 id, u16 offset);
- int (*bap_pwrite)(struct hermes *hw, int bap, const void *buf,
- int len, u16 id, u16 offset);
- int (*read_pda)(struct hermes *hw, __le16 *pda,
- u32 pda_addr, u16 pda_len);
- int (*program_init)(struct hermes *hw, u32 entry_point);
- int (*program_end)(struct hermes *hw);
- int (*program)(struct hermes *hw, const char *buf,
- u32 addr, u32 len);
- void (*lock_irqsave)(spinlock_t *lock, unsigned long *flags);
- void (*unlock_irqrestore)(spinlock_t *lock, unsigned long *flags);
- void (*lock_irq)(spinlock_t *lock);
- void (*unlock_irq)(spinlock_t *lock);
-};
-
-/* Basic control structure */
-struct hermes {
- void __iomem *iobase;
- int reg_spacing;
-#define HERMES_16BIT_REGSPACING 0
-#define HERMES_32BIT_REGSPACING 1
- u16 inten; /* Which interrupts should be enabled? */
- bool eeprom_pda;
- const struct hermes_ops *ops;
- void *priv;
-};
-
-/* Register access convenience macros */
-#define hermes_read_reg(hw, off) \
- (ioread16((hw)->iobase + ((off) << (hw)->reg_spacing)))
-#define hermes_write_reg(hw, off, val) \
- (iowrite16((val), (hw)->iobase + ((off) << (hw)->reg_spacing)))
-#define hermes_read_regn(hw, name) hermes_read_reg((hw), HERMES_##name)
-#define hermes_write_regn(hw, name, val) \
- hermes_write_reg((hw), HERMES_##name, (val))
-
-/* Function prototypes */
-void hermes_struct_init(struct hermes *hw, void __iomem *address,
- int reg_spacing);
-
-/* Inline functions */
-
-static inline int hermes_present(struct hermes *hw)
-{
- return hermes_read_regn(hw, SWSUPPORT0) == HERMES_MAGIC;
-}
-
-static inline void hermes_set_irqmask(struct hermes *hw, u16 events)
-{
- hw->inten = events;
- hermes_write_regn(hw, INTEN, events);
-}
-
-static inline int hermes_enable_port(struct hermes *hw, int port)
-{
- return hw->ops->cmd_wait(hw, HERMES_CMD_ENABLE | (port << 8),
- 0, NULL);
-}
-
-static inline int hermes_disable_port(struct hermes *hw, int port)
-{
- return hw->ops->cmd_wait(hw, HERMES_CMD_DISABLE | (port << 8),
- 0, NULL);
-}
-
-/* Initiate an INQUIRE command (tallies or scan). The result will come as an
- * information frame in __orinoco_ev_info() */
-static inline int hermes_inquire(struct hermes *hw, u16 rid)
-{
- return hw->ops->cmd_wait(hw, HERMES_CMD_INQUIRE, rid, NULL);
-}
-
-#define HERMES_BYTES_TO_RECLEN(n) ((((n) + 1) / 2) + 1)
-#define HERMES_RECLEN_TO_BYTES(n) (((n) - 1) * 2)
-
-/* Note that for the next two, the count is in 16-bit words, not bytes */
-static inline void hermes_read_words(struct hermes *hw, int off,
- void *buf, unsigned count)
-{
- off = off << hw->reg_spacing;
- ioread16_rep(hw->iobase + off, buf, count);
-}
-
-static inline void hermes_write_bytes(struct hermes *hw, int off,
- const char *buf, unsigned count)
-{
- off = off << hw->reg_spacing;
- iowrite16_rep(hw->iobase + off, buf, count >> 1);
- if (unlikely(count & 1))
- iowrite8(buf[count - 1], hw->iobase + off);
-}
-
-static inline void hermes_clear_words(struct hermes *hw, int off,
- unsigned count)
-{
- unsigned i;
-
- off = off << hw->reg_spacing;
-
- for (i = 0; i < count; i++)
- iowrite16(0, hw->iobase + off);
-}
-
-#define HERMES_READ_RECORD(hw, bap, rid, buf) \
- (hw->ops->read_ltv((hw), (bap), (rid), sizeof(*buf), NULL, (buf)))
-#define HERMES_READ_RECORD_PR(hw, bap, rid, buf) \
- (hw->ops->read_ltv_pr((hw), (bap), (rid), sizeof(*buf), NULL, (buf)))
-#define HERMES_WRITE_RECORD(hw, bap, rid, buf) \
- (hw->ops->write_ltv((hw), (bap), (rid), \
- HERMES_BYTES_TO_RECLEN(sizeof(*buf)), (buf)))
-
-static inline int hermes_read_wordrec(struct hermes *hw, int bap, u16 rid,
- u16 *word)
-{
- __le16 rec;
- int err;
-
- err = HERMES_READ_RECORD(hw, bap, rid, &rec);
- *word = le16_to_cpu(rec);
- return err;
-}
-
-static inline int hermes_read_wordrec_pr(struct hermes *hw, int bap, u16 rid,
- u16 *word)
-{
- __le16 rec;
- int err;
-
- err = HERMES_READ_RECORD_PR(hw, bap, rid, &rec);
- *word = le16_to_cpu(rec);
- return err;
-}
-
-static inline int hermes_write_wordrec(struct hermes *hw, int bap, u16 rid,
- u16 word)
-{
- __le16 rec = cpu_to_le16(word);
- return HERMES_WRITE_RECORD(hw, bap, rid, &rec);
-}
-
-#endif /* _HERMES_H */
diff --git a/drivers/net/wireless/intersil/orinoco/hermes_dld.c b/drivers/net/wireless/intersil/orinoco/hermes_dld.c
deleted file mode 100644
index dbeadfcfefe2..000000000000
--- a/drivers/net/wireless/intersil/orinoco/hermes_dld.c
+++ /dev/null
@@ -1,477 +0,0 @@
-/*
- * Hermes download helper.
- *
- * This helper:
- * - is capable of writing to the volatile area of the hermes device
- * - is currently not capable of writing to non-volatile areas
- * - provide helpers to identify and update plugin data
- * - is not capable of interpreting a fw image directly. That is up to
- * the main card driver.
- * - deals with Hermes I devices. It can probably be modified to deal
- * with Hermes II devices
- *
- * Copyright (C) 2007, David Kilroy
- *
- * Plug data code slightly modified from spectrum_cs driver
- * Copyright (C) 2002-2005 Pavel Roskin <proski@gnu.org>
- * Portions based on information in wl_lkm_718 Agere driver
- * COPYRIGHT (C) 2001-2004 by Agere Systems Inc. All Rights Reserved
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include "hermes.h"
-#include "hermes_dld.h"
-
-#define PFX "hermes_dld: "
-
-/* End markers used in dblocks */
-#define PDI_END 0x00000000 /* End of PDA */
-#define BLOCK_END 0xFFFFFFFF /* Last image block */
-#define TEXT_END 0x1A /* End of text header */
-
-/*
- * The following structures have little-endian fields denoted by
- * the leading underscore. Don't access them directly - use inline
- * functions defined below.
- */
-
-/*
- * The binary image to be downloaded consists of series of data blocks.
- * Each block has the following structure.
- */
-struct dblock {
- __le32 addr; /* adapter address where to write the block */
- __le16 len; /* length of the data only, in bytes */
- char data[]; /* data to be written */
-} __packed;
-
-/*
- * Plug Data References are located in the image after the last data
- * block. They refer to areas in the adapter memory where the plug data
- * items with matching ID should be written.
- */
-struct pdr {
- __le32 id; /* record ID */
- __le32 addr; /* adapter address where to write the data */
- __le32 len; /* expected length of the data, in bytes */
- char next[]; /* next PDR starts here */
-} __packed;
-
-/*
- * Plug Data Items are located in the EEPROM read from the adapter by
- * primary firmware. They refer to the device-specific data that should
- * be plugged into the secondary firmware.
- */
-struct pdi {
- __le16 len; /* length of ID and data, in words */
- __le16 id; /* record ID */
- char data[]; /* plug data */
-} __packed;
-
-/*** FW data block access functions ***/
-
-static inline u32
-dblock_addr(const struct dblock *blk)
-{
- return le32_to_cpu(blk->addr);
-}
-
-static inline u32
-dblock_len(const struct dblock *blk)
-{
- return le16_to_cpu(blk->len);
-}
-
-/*** PDR Access functions ***/
-
-static inline u32
-pdr_id(const struct pdr *pdr)
-{
- return le32_to_cpu(pdr->id);
-}
-
-static inline u32
-pdr_addr(const struct pdr *pdr)
-{
- return le32_to_cpu(pdr->addr);
-}
-
-static inline u32
-pdr_len(const struct pdr *pdr)
-{
- return le32_to_cpu(pdr->len);
-}
-
-/*** PDI Access functions ***/
-
-static inline u32
-pdi_id(const struct pdi *pdi)
-{
- return le16_to_cpu(pdi->id);
-}
-
-/* Return length of the data only, in bytes */
-static inline u32
-pdi_len(const struct pdi *pdi)
-{
- return 2 * (le16_to_cpu(pdi->len) - 1);
-}
-
-/*** Plug Data Functions ***/
-
-/*
- * Scan PDR for the record with the specified RECORD_ID.
- * If it's not found, return NULL.
- */
-static const struct pdr *
-hermes_find_pdr(const struct pdr *first_pdr, u32 record_id, const void *end)
-{
- const struct pdr *pdr = first_pdr;
-
- end -= sizeof(struct pdr);
-
- while (((void *) pdr <= end) &&
- (pdr_id(pdr) != PDI_END)) {
- /*
- * PDR area is currently not terminated by PDI_END.
- * It's followed by CRC records, which have the type
- * field where PDR has length. The type can be 0 or 1.
- */
- if (pdr_len(pdr) < 2)
- return NULL;
-
- /* If the record ID matches, we are done */
- if (pdr_id(pdr) == record_id)
- return pdr;
-
- pdr = (struct pdr *) pdr->next;
- }
- return NULL;
-}
-
-/* Scan production data items for a particular entry */
-static const struct pdi *
-hermes_find_pdi(const struct pdi *first_pdi, u32 record_id, const void *end)
-{
- const struct pdi *pdi = first_pdi;
-
- end -= sizeof(struct pdi);
-
- while (((void *) pdi <= end) &&
- (pdi_id(pdi) != PDI_END)) {
-
- /* If the record ID matches, we are done */
- if (pdi_id(pdi) == record_id)
- return pdi;
-
- pdi = (struct pdi *) &pdi->data[pdi_len(pdi)];
- }
- return NULL;
-}
-
-/* Process one Plug Data Item - find corresponding PDR and plug it */
-static int
-hermes_plug_pdi(struct hermes *hw, const struct pdr *first_pdr,
- const struct pdi *pdi, const void *pdr_end)
-{
- const struct pdr *pdr;
-
- /* Find the PDR corresponding to this PDI */
- pdr = hermes_find_pdr(first_pdr, pdi_id(pdi), pdr_end);
-
- /* No match is found, safe to ignore */
- if (!pdr)
- return 0;
-
- /* Lengths of the data in PDI and PDR must match */
- if (pdi_len(pdi) != pdr_len(pdr))
- return -EINVAL;
-
- /* do the actual plugging */
- hw->ops->program(hw, pdi->data, pdr_addr(pdr), pdi_len(pdi));
-
- return 0;
-}
-
-/* Parse PDA and write the records into the adapter
- *
- * Attempt to write every records that is in the specified pda
- * which also has a valid production data record for the firmware.
- */
-int hermes_apply_pda(struct hermes *hw,
- const char *first_pdr,
- const void *pdr_end,
- const __le16 *pda,
- const void *pda_end)
-{
- int ret;
- const struct pdi *pdi;
- const struct pdr *pdr;
-
- pdr = (const struct pdr *) first_pdr;
- pda_end -= sizeof(struct pdi);
-
- /* Go through every PDI and plug them into the adapter */
- pdi = (const struct pdi *) (pda + 2);
- while (((void *) pdi <= pda_end) &&
- (pdi_id(pdi) != PDI_END)) {
- ret = hermes_plug_pdi(hw, pdr, pdi, pdr_end);
- if (ret)
- return ret;
-
- /* Increment to the next PDI */
- pdi = (const struct pdi *) &pdi->data[pdi_len(pdi)];
- }
- return 0;
-}
-
-/* Identify the total number of bytes in all blocks
- * including the header data.
- */
-size_t
-hermes_blocks_length(const char *first_block, const void *end)
-{
- const struct dblock *blk = (const struct dblock *) first_block;
- int total_len = 0;
- int len;
-
- end -= sizeof(*blk);
-
- /* Skip all blocks to locate Plug Data References
- * (Spectrum CS) */
- while (((void *) blk <= end) &&
- (dblock_addr(blk) != BLOCK_END)) {
- len = dblock_len(blk);
- total_len += sizeof(*blk) + len;
- blk = (struct dblock *) &blk->data[len];
- }
-
- return total_len;
-}
-
-/*** Hermes programming ***/
-
-/* Program the data blocks */
-int hermes_program(struct hermes *hw, const char *first_block, const void *end)
-{
- const struct dblock *blk;
- u32 blkaddr;
- u32 blklen;
- int err = 0;
-
- blk = (const struct dblock *) first_block;
-
- if ((void *) blk > (end - sizeof(*blk)))
- return -EIO;
-
- blkaddr = dblock_addr(blk);
- blklen = dblock_len(blk);
-
- while ((blkaddr != BLOCK_END) &&
- (((void *) blk + blklen) <= end)) {
- pr_debug(PFX "Programming block of length %d "
- "to address 0x%08x\n", blklen, blkaddr);
-
- err = hw->ops->program(hw, blk->data, blkaddr, blklen);
- if (err)
- break;
-
- blk = (const struct dblock *) &blk->data[blklen];
-
- if ((void *) blk > (end - sizeof(*blk)))
- return -EIO;
-
- blkaddr = dblock_addr(blk);
- blklen = dblock_len(blk);
- }
- return err;
-}
-
-/*** Default plugging data for Hermes I ***/
-/* Values from wl_lkm_718/hcf/dhf.c */
-
-#define DEFINE_DEFAULT_PDR(pid, length, data) \
-static const struct { \
- __le16 len; \
- __le16 id; \
- u8 val[length]; \
-} __packed default_pdr_data_##pid = { \
- cpu_to_le16((sizeof(default_pdr_data_##pid)/ \
- sizeof(__le16)) - 1), \
- cpu_to_le16(pid), \
- data \
-}
-
-#define DEFAULT_PDR(pid) default_pdr_data_##pid
-
-/* HWIF Compatibility */
-DEFINE_DEFAULT_PDR(0x0005, 10, "\x00\x00\x06\x00\x01\x00\x01\x00\x01\x00");
-
-/* PPPPSign */
-DEFINE_DEFAULT_PDR(0x0108, 4, "\x00\x00\x00\x00");
-
-/* PPPPProf */
-DEFINE_DEFAULT_PDR(0x0109, 10, "\x00\x00\x00\x00\x03\x00\x00\x00\x00\x00");
-
-/* Antenna diversity */
-DEFINE_DEFAULT_PDR(0x0150, 2, "\x00\x3F");
-
-/* Modem VCO band Set-up */
-DEFINE_DEFAULT_PDR(0x0160, 28,
- "\x00\x00\x00\x00\x00\x00\x00\x00"
- "\x00\x00\x00\x00\x00\x00\x00\x00"
- "\x00\x00\x00\x00\x00\x00\x00\x00"
- "\x00\x00\x00\x00");
-
-/* Modem Rx Gain Table Values */
-DEFINE_DEFAULT_PDR(0x0161, 256,
- "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
- "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
- "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
- "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
- "\x3F\x01\x3E\01\x3E\x01\x3D\x01"
- "\x3D\x01\x3C\01\x3C\x01\x3B\x01"
- "\x3B\x01\x3A\01\x3A\x01\x39\x01"
- "\x39\x01\x38\01\x38\x01\x37\x01"
- "\x37\x01\x36\01\x36\x01\x35\x01"
- "\x35\x01\x34\01\x34\x01\x33\x01"
- "\x33\x01\x32\x01\x32\x01\x31\x01"
- "\x31\x01\x30\x01\x30\x01\x7B\x01"
- "\x7B\x01\x7A\x01\x7A\x01\x79\x01"
- "\x79\x01\x78\x01\x78\x01\x77\x01"
- "\x77\x01\x76\x01\x76\x01\x75\x01"
- "\x75\x01\x74\x01\x74\x01\x73\x01"
- "\x73\x01\x72\x01\x72\x01\x71\x01"
- "\x71\x01\x70\x01\x70\x01\x68\x01"
- "\x68\x01\x67\x01\x67\x01\x66\x01"
- "\x66\x01\x65\x01\x65\x01\x57\x01"
- "\x57\x01\x56\x01\x56\x01\x55\x01"
- "\x55\x01\x54\x01\x54\x01\x53\x01"
- "\x53\x01\x52\x01\x52\x01\x51\x01"
- "\x51\x01\x50\x01\x50\x01\x48\x01"
- "\x48\x01\x47\x01\x47\x01\x46\x01"
- "\x46\x01\x45\x01\x45\x01\x44\x01"
- "\x44\x01\x43\x01\x43\x01\x42\x01"
- "\x42\x01\x41\x01\x41\x01\x40\x01"
- "\x40\x01\x40\x01\x40\x01\x40\x01"
- "\x40\x01\x40\x01\x40\x01\x40\x01"
- "\x40\x01\x40\x01\x40\x01\x40\x01"
- "\x40\x01\x40\x01\x40\x01\x40\x01");
-
-/* Write PDA according to certain rules.
- *
- * For every production data record, look for a previous setting in
- * the pda, and use that.
- *
- * For certain records, use defaults if they are not found in pda.
- */
-int hermes_apply_pda_with_defaults(struct hermes *hw,
- const char *first_pdr,
- const void *pdr_end,
- const __le16 *pda,
- const void *pda_end)
-{
- const struct pdr *pdr = (const struct pdr *) first_pdr;
- const struct pdi *first_pdi = (const struct pdi *) &pda[2];
- const struct pdi *pdi;
- const struct pdi *default_pdi = NULL;
- const struct pdi *outdoor_pdi;
- int record_id;
-
- pdr_end -= sizeof(struct pdr);
-
- while (((void *) pdr <= pdr_end) &&
- (pdr_id(pdr) != PDI_END)) {
- /*
- * For spectrum_cs firmwares,
- * PDR area is currently not terminated by PDI_END.
- * It's followed by CRC records, which have the type
- * field where PDR has length. The type can be 0 or 1.
- */
- if (pdr_len(pdr) < 2)
- break;
- record_id = pdr_id(pdr);
-
- pdi = hermes_find_pdi(first_pdi, record_id, pda_end);
- if (pdi)
- pr_debug(PFX "Found record 0x%04x at %p\n",
- record_id, pdi);
-
- switch (record_id) {
- case 0x110: /* Modem REFDAC values */
- case 0x120: /* Modem VGDAC values */
- outdoor_pdi = hermes_find_pdi(first_pdi, record_id + 1,
- pda_end);
- default_pdi = NULL;
- if (outdoor_pdi) {
- pdi = outdoor_pdi;
- pr_debug(PFX
- "Using outdoor record 0x%04x at %p\n",
- record_id + 1, pdi);
- }
- break;
- case 0x5: /* HWIF Compatibility */
- default_pdi = (struct pdi *) &DEFAULT_PDR(0x0005);
- break;
- case 0x108: /* PPPPSign */
- default_pdi = (struct pdi *) &DEFAULT_PDR(0x0108);
- break;
- case 0x109: /* PPPPProf */
- default_pdi = (struct pdi *) &DEFAULT_PDR(0x0109);
- break;
- case 0x150: /* Antenna diversity */
- default_pdi = (struct pdi *) &DEFAULT_PDR(0x0150);
- break;
- case 0x160: /* Modem VCO band Set-up */
- default_pdi = (struct pdi *) &DEFAULT_PDR(0x0160);
- break;
- case 0x161: /* Modem Rx Gain Table Values */
- default_pdi = (struct pdi *) &DEFAULT_PDR(0x0161);
- break;
- default:
- default_pdi = NULL;
- break;
- }
- if (!pdi && default_pdi) {
- /* Use default */
- pdi = default_pdi;
- pr_debug(PFX "Using default record 0x%04x at %p\n",
- record_id, pdi);
- }
-
- if (pdi) {
- /* Lengths of the data in PDI and PDR must match */
- if ((pdi_len(pdi) == pdr_len(pdr)) &&
- ((void *) pdi->data + pdi_len(pdi) < pda_end)) {
- /* do the actual plugging */
- hw->ops->program(hw, pdi->data, pdr_addr(pdr),
- pdi_len(pdi));
- }
- }
-
- pdr++;
- }
- return 0;
-}
diff --git a/drivers/net/wireless/intersil/orinoco/hermes_dld.h b/drivers/net/wireless/intersil/orinoco/hermes_dld.h
deleted file mode 100644
index b5377e232c63..000000000000
--- a/drivers/net/wireless/intersil/orinoco/hermes_dld.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (C) 2007, David Kilroy
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-#ifndef _HERMES_DLD_H
-#define _HERMES_DLD_H
-
-#include "hermes.h"
-
-int hermesi_program_init(struct hermes *hw, u32 offset);
-int hermesi_program_end(struct hermes *hw);
-int hermes_program(struct hermes *hw, const char *first_block, const void *end);
-
-int hermes_read_pda(struct hermes *hw,
- __le16 *pda,
- u32 pda_addr,
- u16 pda_len,
- int use_eeprom);
-int hermes_apply_pda(struct hermes *hw,
- const char *first_pdr,
- const void *pdr_end,
- const __le16 *pda,
- const void *pda_end);
-int hermes_apply_pda_with_defaults(struct hermes *hw,
- const char *first_pdr,
- const void *pdr_end,
- const __le16 *pda,
- const void *pda_end);
-
-size_t hermes_blocks_length(const char *first_block, const void *end);
-
-#endif /* _HERMES_DLD_H */
diff --git a/drivers/net/wireless/intersil/orinoco/hermes_rid.h b/drivers/net/wireless/intersil/orinoco/hermes_rid.h
deleted file mode 100644
index 42eb67dea1df..000000000000
--- a/drivers/net/wireless/intersil/orinoco/hermes_rid.h
+++ /dev/null
@@ -1,165 +0,0 @@
-#ifndef _HERMES_RID_H
-#define _HERMES_RID_H
-
-/*
- * Configuration RIDs
- */
-#define HERMES_RID_CNFPORTTYPE 0xFC00
-#define HERMES_RID_CNFOWNMACADDR 0xFC01
-#define HERMES_RID_CNFDESIREDSSID 0xFC02
-#define HERMES_RID_CNFOWNCHANNEL 0xFC03
-#define HERMES_RID_CNFOWNSSID 0xFC04
-#define HERMES_RID_CNFOWNATIMWINDOW 0xFC05
-#define HERMES_RID_CNFSYSTEMSCALE 0xFC06
-#define HERMES_RID_CNFMAXDATALEN 0xFC07
-#define HERMES_RID_CNFWDSADDRESS 0xFC08
-#define HERMES_RID_CNFPMENABLED 0xFC09
-#define HERMES_RID_CNFPMEPS 0xFC0A
-#define HERMES_RID_CNFMULTICASTRECEIVE 0xFC0B
-#define HERMES_RID_CNFMAXSLEEPDURATION 0xFC0C
-#define HERMES_RID_CNFPMHOLDOVERDURATION 0xFC0D
-#define HERMES_RID_CNFOWNNAME 0xFC0E
-#define HERMES_RID_CNFOWNDTIMPERIOD 0xFC10
-#define HERMES_RID_CNFWDSADDRESS1 0xFC11
-#define HERMES_RID_CNFWDSADDRESS2 0xFC12
-#define HERMES_RID_CNFWDSADDRESS3 0xFC13
-#define HERMES_RID_CNFWDSADDRESS4 0xFC14
-#define HERMES_RID_CNFWDSADDRESS5 0xFC15
-#define HERMES_RID_CNFWDSADDRESS6 0xFC16
-#define HERMES_RID_CNFMULTICASTPMBUFFERING 0xFC17
-#define HERMES_RID_CNFWEPENABLED_AGERE 0xFC20
-#define HERMES_RID_CNFAUTHENTICATION_AGERE 0xFC21
-#define HERMES_RID_CNFMANDATORYBSSID_SYMBOL 0xFC21
-#define HERMES_RID_CNFDROPUNENCRYPTED 0xFC22
-#define HERMES_RID_CNFWEPDEFAULTKEYID 0xFC23
-#define HERMES_RID_CNFDEFAULTKEY0 0xFC24
-#define HERMES_RID_CNFDEFAULTKEY1 0xFC25
-#define HERMES_RID_CNFMWOROBUST_AGERE 0xFC25
-#define HERMES_RID_CNFDEFAULTKEY2 0xFC26
-#define HERMES_RID_CNFDEFAULTKEY3 0xFC27
-#define HERMES_RID_CNFWEPFLAGS_INTERSIL 0xFC28
-#define HERMES_RID_CNFWEPKEYMAPPINGTABLE 0xFC29
-#define HERMES_RID_CNFAUTHENTICATION 0xFC2A
-#define HERMES_RID_CNFMAXASSOCSTA 0xFC2B
-#define HERMES_RID_CNFKEYLENGTH_SYMBOL 0xFC2B
-#define HERMES_RID_CNFTXCONTROL 0xFC2C
-#define HERMES_RID_CNFROAMINGMODE 0xFC2D
-#define HERMES_RID_CNFHOSTAUTHENTICATION 0xFC2E
-#define HERMES_RID_CNFRCVCRCERROR 0xFC30
-#define HERMES_RID_CNFMMLIFE 0xFC31
-#define HERMES_RID_CNFALTRETRYCOUNT 0xFC32
-#define HERMES_RID_CNFBEACONINT 0xFC33
-#define HERMES_RID_CNFAPPCFINFO 0xFC34
-#define HERMES_RID_CNFSTAPCFINFO 0xFC35
-#define HERMES_RID_CNFPRIORITYQUSAGE 0xFC37
-#define HERMES_RID_CNFTIMCTRL 0xFC40
-#define HERMES_RID_CNFTHIRTY2TALLY 0xFC42
-#define HERMES_RID_CNFENHSECURITY 0xFC43
-#define HERMES_RID_CNFGROUPADDRESSES 0xFC80
-#define HERMES_RID_CNFCREATEIBSS 0xFC81
-#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD 0xFC82
-#define HERMES_RID_CNFRTSTHRESHOLD 0xFC83
-#define HERMES_RID_CNFTXRATECONTROL 0xFC84
-#define HERMES_RID_CNFPROMISCUOUSMODE 0xFC85
-#define HERMES_RID_CNFBASICRATES_SYMBOL 0xFC8A
-#define HERMES_RID_CNFPREAMBLE_SYMBOL 0xFC8C
-#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD0 0xFC90
-#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD1 0xFC91
-#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD2 0xFC92
-#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD3 0xFC93
-#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD4 0xFC94
-#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD5 0xFC95
-#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD6 0xFC96
-#define HERMES_RID_CNFRTSTHRESHOLD0 0xFC97
-#define HERMES_RID_CNFRTSTHRESHOLD1 0xFC98
-#define HERMES_RID_CNFRTSTHRESHOLD2 0xFC99
-#define HERMES_RID_CNFRTSTHRESHOLD3 0xFC9A
-#define HERMES_RID_CNFRTSTHRESHOLD4 0xFC9B
-#define HERMES_RID_CNFRTSTHRESHOLD5 0xFC9C
-#define HERMES_RID_CNFRTSTHRESHOLD6 0xFC9D
-#define HERMES_RID_CNFHOSTSCAN_SYMBOL 0xFCAB
-#define HERMES_RID_CNFSHORTPREAMBLE 0xFCB0
-#define HERMES_RID_CNFWEPKEYS_AGERE 0xFCB0
-#define HERMES_RID_CNFEXCLUDELONGPREAMBLE 0xFCB1
-#define HERMES_RID_CNFTXKEY_AGERE 0xFCB1
-#define HERMES_RID_CNFAUTHENTICATIONRSPTO 0xFCB2
-#define HERMES_RID_CNFSCANSSID_AGERE 0xFCB2
-#define HERMES_RID_CNFBASICRATES 0xFCB3
-#define HERMES_RID_CNFSUPPORTEDRATES 0xFCB4
-#define HERMES_RID_CNFADDDEFAULTTKIPKEY_AGERE 0xFCB4
-#define HERMES_RID_CNFSETWPAAUTHMGMTSUITE_AGERE 0xFCB5
-#define HERMES_RID_CNFREMDEFAULTTKIPKEY_AGERE 0xFCB6
-#define HERMES_RID_CNFADDMAPPEDTKIPKEY_AGERE 0xFCB7
-#define HERMES_RID_CNFREMMAPPEDTKIPKEY_AGERE 0xFCB8
-#define HERMES_RID_CNFSETWPACAPABILITIES_AGERE 0xFCB9
-#define HERMES_RID_CNFCACHEDPMKADDRESS 0xFCBA
-#define HERMES_RID_CNFREMOVEPMKADDRESS 0xFCBB
-#define HERMES_RID_CNFSCANCHANNELS2GHZ 0xFCC2
-#define HERMES_RID_CNFDISASSOCIATE 0xFCC8
-#define HERMES_RID_CNFTICKTIME 0xFCE0
-#define HERMES_RID_CNFSCANREQUEST 0xFCE1
-#define HERMES_RID_CNFJOINREQUEST 0xFCE2
-#define HERMES_RID_CNFAUTHENTICATESTATION 0xFCE3
-#define HERMES_RID_CNFCHANNELINFOREQUEST 0xFCE4
-#define HERMES_RID_CNFHOSTSCAN 0xFCE5
-
-/*
- * Information RIDs
- */
-#define HERMES_RID_MAXLOADTIME 0xFD00
-#define HERMES_RID_DOWNLOADBUFFER 0xFD01
-#define HERMES_RID_PRIID 0xFD02
-#define HERMES_RID_PRISUPRANGE 0xFD03
-#define HERMES_RID_CFIACTRANGES 0xFD04
-#define HERMES_RID_NICSERNUM 0xFD0A
-#define HERMES_RID_NICID 0xFD0B
-#define HERMES_RID_MFISUPRANGE 0xFD0C
-#define HERMES_RID_CFISUPRANGE 0xFD0D
-#define HERMES_RID_CHANNELLIST 0xFD10
-#define HERMES_RID_REGULATORYDOMAINS 0xFD11
-#define HERMES_RID_TEMPTYPE 0xFD12
-#define HERMES_RID_CIS 0xFD13
-#define HERMES_RID_STAID 0xFD20
-#define HERMES_RID_STASUPRANGE 0xFD21
-#define HERMES_RID_MFIACTRANGES 0xFD22
-#define HERMES_RID_CFIACTRANGES2 0xFD23
-#define HERMES_RID_SECONDARYVERSION_SYMBOL 0xFD24
-#define HERMES_RID_PORTSTATUS 0xFD40
-#define HERMES_RID_CURRENTSSID 0xFD41
-#define HERMES_RID_CURRENTBSSID 0xFD42
-#define HERMES_RID_COMMSQUALITY 0xFD43
-#define HERMES_RID_CURRENTTXRATE 0xFD44
-#define HERMES_RID_CURRENTBEACONINTERVAL 0xFD45
-#define HERMES_RID_CURRENTSCALETHRESHOLDS 0xFD46
-#define HERMES_RID_PROTOCOLRSPTIME 0xFD47
-#define HERMES_RID_SHORTRETRYLIMIT 0xFD48
-#define HERMES_RID_LONGRETRYLIMIT 0xFD49
-#define HERMES_RID_MAXTRANSMITLIFETIME 0xFD4A
-#define HERMES_RID_MAXRECEIVELIFETIME 0xFD4B
-#define HERMES_RID_CFPOLLABLE 0xFD4C
-#define HERMES_RID_AUTHENTICATIONALGORITHMS 0xFD4D
-#define HERMES_RID_PRIVACYOPTIONIMPLEMENTED 0xFD4F
-#define HERMES_RID_DBMCOMMSQUALITY_INTERSIL 0xFD51
-#define HERMES_RID_CURRENTTXRATE1 0xFD80
-#define HERMES_RID_CURRENTTXRATE2 0xFD81
-#define HERMES_RID_CURRENTTXRATE3 0xFD82
-#define HERMES_RID_CURRENTTXRATE4 0xFD83
-#define HERMES_RID_CURRENTTXRATE5 0xFD84
-#define HERMES_RID_CURRENTTXRATE6 0xFD85
-#define HERMES_RID_OWNMACADDR 0xFD86
-#define HERMES_RID_SCANRESULTSTABLE 0xFD88
-#define HERMES_RID_CURRENT_COUNTRY_INFO 0xFD89
-#define HERMES_RID_CURRENT_WPA_IE 0xFD8A
-#define HERMES_RID_CURRENT_TKIP_IV 0xFD8B
-#define HERMES_RID_CURRENT_ASSOC_REQ_INFO 0xFD8C
-#define HERMES_RID_CURRENT_ASSOC_RESP_INFO 0xFD8D
-#define HERMES_RID_TXQUEUEEMPTY 0xFD91
-#define HERMES_RID_PHYTYPE 0xFDC0
-#define HERMES_RID_CURRENTCHANNEL 0xFDC1
-#define HERMES_RID_CURRENTPOWERSTATE 0xFDC2
-#define HERMES_RID_CCAMODE 0xFDC3
-#define HERMES_RID_SUPPORTEDDATARATES 0xFDC6
-#define HERMES_RID_BUILDSEQ 0xFFFE
-#define HERMES_RID_FWID 0xFFFF
-
-#endif
diff --git a/drivers/net/wireless/intersil/orinoco/hw.c b/drivers/net/wireless/intersil/orinoco/hw.c
deleted file mode 100644
index 4fcca08e50de..000000000000
--- a/drivers/net/wireless/intersil/orinoco/hw.c
+++ /dev/null
@@ -1,1362 +0,0 @@
-/* Encapsulate basic setting changes and retrieval on Hermes hardware
- *
- * See copyright notice in main.c
- */
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/if_arp.h>
-#include <linux/ieee80211.h>
-#include <linux/wireless.h>
-#include <net/cfg80211.h>
-#include "hermes.h"
-#include "hermes_rid.h"
-#include "orinoco.h"
-
-#include "hw.h"
-
-#define SYMBOL_MAX_VER_LEN (14)
-
-/* Symbol firmware has a bug allocating buffers larger than this */
-#define TX_NICBUF_SIZE_BUG 1585
-
-/********************************************************************/
-/* Data tables */
-/********************************************************************/
-
-/* This tables gives the actual meanings of the bitrate IDs returned
- * by the firmware. */
-static const struct {
- int bitrate; /* in 100s of kilobits */
- int automatic;
- u16 agere_txratectrl;
- u16 intersil_txratectrl;
-} bitrate_table[] = {
- {110, 1, 3, 15}, /* Entry 0 is the default */
- {10, 0, 1, 1},
- {10, 1, 1, 1},
- {20, 0, 2, 2},
- {20, 1, 6, 3},
- {55, 0, 4, 4},
- {55, 1, 7, 7},
- {110, 0, 5, 8},
-};
-#define BITRATE_TABLE_SIZE ARRAY_SIZE(bitrate_table)
-
-/* Firmware version encoding */
-struct comp_id {
- u16 id, variant, major, minor;
-} __packed;
-
-static inline enum fwtype determine_firmware_type(struct comp_id *nic_id)
-{
- if (nic_id->id < 0x8000)
- return FIRMWARE_TYPE_AGERE;
- else if (nic_id->id == 0x8000 && nic_id->major == 0)
- return FIRMWARE_TYPE_SYMBOL;
- else
- return FIRMWARE_TYPE_INTERSIL;
-}
-
-/* Set priv->firmware type, determine firmware properties
- * This function can be called before we have registerred with netdev,
- * so all errors go out with dev_* rather than printk
- *
- * If non-NULL stores a firmware description in fw_name.
- * If non-NULL stores a HW version in hw_ver
- *
- * These are output via generic cfg80211 ethtool support.
- */
-int determine_fw_capabilities(struct orinoco_private *priv,
- char *fw_name, size_t fw_name_len,
- u32 *hw_ver)
-{
- struct device *dev = priv->dev;
- struct hermes *hw = &priv->hw;
- int err;
- struct comp_id nic_id, sta_id;
- unsigned int firmver;
- char tmp[SYMBOL_MAX_VER_LEN + 1] __attribute__((aligned(2)));
-
- /* Get the hardware version */
- err = HERMES_READ_RECORD_PR(hw, USER_BAP, HERMES_RID_NICID, &nic_id);
- if (err) {
- dev_err(dev, "Cannot read hardware identity: error %d\n",
- err);
- return err;
- }
-
- le16_to_cpus(&nic_id.id);
- le16_to_cpus(&nic_id.variant);
- le16_to_cpus(&nic_id.major);
- le16_to_cpus(&nic_id.minor);
- dev_info(dev, "Hardware identity %04x:%04x:%04x:%04x\n",
- nic_id.id, nic_id.variant, nic_id.major, nic_id.minor);
-
- if (hw_ver)
- *hw_ver = (((nic_id.id & 0xff) << 24) |
- ((nic_id.variant & 0xff) << 16) |
- ((nic_id.major & 0xff) << 8) |
- (nic_id.minor & 0xff));
-
- priv->firmware_type = determine_firmware_type(&nic_id);
-
- /* Get the firmware version */
- err = HERMES_READ_RECORD_PR(hw, USER_BAP, HERMES_RID_STAID, &sta_id);
- if (err) {
- dev_err(dev, "Cannot read station identity: error %d\n",
- err);
- return err;
- }
-
- le16_to_cpus(&sta_id.id);
- le16_to_cpus(&sta_id.variant);
- le16_to_cpus(&sta_id.major);
- le16_to_cpus(&sta_id.minor);
- dev_info(dev, "Station identity %04x:%04x:%04x:%04x\n",
- sta_id.id, sta_id.variant, sta_id.major, sta_id.minor);
-
- switch (sta_id.id) {
- case 0x15:
- dev_err(dev, "Primary firmware is active\n");
- return -ENODEV;
- case 0x14b:
- dev_err(dev, "Tertiary firmware is active\n");
- return -ENODEV;
- case 0x1f: /* Intersil, Agere, Symbol Spectrum24 */
- case 0x21: /* Symbol Spectrum24 Trilogy */
- break;
- default:
- dev_notice(dev, "Unknown station ID, please report\n");
- break;
- }
-
- /* Default capabilities */
- priv->has_sensitivity = 1;
- priv->has_mwo = 0;
- priv->has_preamble = 0;
- priv->has_port3 = 1;
- priv->has_ibss = 1;
- priv->has_wep = 0;
- priv->has_big_wep = 0;
- priv->has_alt_txcntl = 0;
- priv->has_ext_scan = 0;
- priv->has_wpa = 0;
- priv->do_fw_download = 0;
-
- /* Determine capabilities from the firmware version */
- switch (priv->firmware_type) {
- case FIRMWARE_TYPE_AGERE:
- /* Lucent Wavelan IEEE, Lucent Orinoco, Cabletron RoamAbout,
- ELSA, Melco, HP, IBM, Dell 1150, Compaq 110/210 */
- if (fw_name)
- snprintf(fw_name, fw_name_len, "Lucent/Agere %d.%02d",
- sta_id.major, sta_id.minor);
-
- firmver = ((unsigned long)sta_id.major << 16) | sta_id.minor;
-
- priv->has_ibss = (firmver >= 0x60006);
- priv->has_wep = (firmver >= 0x40020);
- priv->has_big_wep = 1; /* FIXME: this is wrong - how do we tell
- Gold cards from the others? */
- priv->has_mwo = (firmver >= 0x60000);
- priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */
- priv->ibss_port = 1;
- priv->has_hostscan = (firmver >= 0x8000a);
- priv->do_fw_download = 1;
- priv->broken_monitor = (firmver >= 0x80000);
- priv->has_alt_txcntl = (firmver >= 0x90000); /* All 9.x ? */
- priv->has_ext_scan = (firmver >= 0x90000); /* All 9.x ? */
- priv->has_wpa = (firmver >= 0x9002a);
- /* Tested with Agere firmware :
- * 1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II
- * Tested CableTron firmware : 4.32 => Anton */
- break;
- case FIRMWARE_TYPE_SYMBOL:
- /* Symbol , 3Com AirConnect, Intel, Ericsson WLAN */
- /* Intel MAC : 00:02:B3:* */
- /* 3Com MAC : 00:50:DA:* */
- memset(tmp, 0, sizeof(tmp));
- /* Get the Symbol firmware version */
- err = hw->ops->read_ltv_pr(hw, USER_BAP,
- HERMES_RID_SECONDARYVERSION_SYMBOL,
- SYMBOL_MAX_VER_LEN, NULL, &tmp);
- if (err) {
- dev_warn(dev, "Error %d reading Symbol firmware info. "
- "Wildly guessing capabilities...\n", err);
- firmver = 0;
- tmp[0] = '\0';
- } else {
- /* The firmware revision is a string, the format is
- * something like : "V2.20-01".
- * Quick and dirty parsing... - Jean II
- */
- firmver = ((tmp[1] - '0') << 16)
- | ((tmp[3] - '0') << 12)
- | ((tmp[4] - '0') << 8)
- | ((tmp[6] - '0') << 4)
- | (tmp[7] - '0');
-
- tmp[SYMBOL_MAX_VER_LEN] = '\0';
- }
-
- if (fw_name)
- snprintf(fw_name, fw_name_len, "Symbol %s", tmp);
-
- priv->has_ibss = (firmver >= 0x20000);
- priv->has_wep = (firmver >= 0x15012);
- priv->has_big_wep = (firmver >= 0x20000);
- priv->has_pm = (firmver >= 0x20000 && firmver < 0x22000) ||
- (firmver >= 0x29000 && firmver < 0x30000) ||
- firmver >= 0x31000;
- priv->has_preamble = (firmver >= 0x20000);
- priv->ibss_port = 4;
-
- /* Symbol firmware is found on various cards, but
- * there has been no attempt to check firmware
- * download on non-spectrum_cs based cards.
- *
- * Given that the Agere firmware download works
- * differently, we should avoid doing a firmware
- * download with the Symbol algorithm on non-spectrum
- * cards.
- *
- * For now we can identify a spectrum_cs based card
- * because it has a firmware reset function.
- */
- priv->do_fw_download = (priv->stop_fw != NULL);
-
- priv->broken_disableport = (firmver == 0x25013) ||
- (firmver >= 0x30000 && firmver <= 0x31000);
- priv->has_hostscan = (firmver >= 0x31001) ||
- (firmver >= 0x29057 && firmver < 0x30000);
- /* Tested with Intel firmware : 0x20015 => Jean II */
- /* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */
- break;
- case FIRMWARE_TYPE_INTERSIL:
- /* D-Link, Linksys, Adtron, ZoomAir, and many others...
- * Samsung, Compaq 100/200 and Proxim are slightly
- * different and less well tested */
- /* D-Link MAC : 00:40:05:* */
- /* Addtron MAC : 00:90:D1:* */
- if (fw_name)
- snprintf(fw_name, fw_name_len, "Intersil %d.%d.%d",
- sta_id.major, sta_id.minor, sta_id.variant);
-
- firmver = ((unsigned long)sta_id.major << 16) |
- ((unsigned long)sta_id.minor << 8) | sta_id.variant;
-
- priv->has_ibss = (firmver >= 0x000700); /* FIXME */
- priv->has_big_wep = priv->has_wep = (firmver >= 0x000800);
- priv->has_pm = (firmver >= 0x000700);
- priv->has_hostscan = (firmver >= 0x010301);
-
- if (firmver >= 0x000800)
- priv->ibss_port = 0;
- else {
- dev_notice(dev, "Intersil firmware earlier than v0.8.x"
- " - several features not supported\n");
- priv->ibss_port = 1;
- }
- break;
- }
- if (fw_name)
- dev_info(dev, "Firmware determined as %s\n", fw_name);
-
-#ifndef CONFIG_HERMES_PRISM
- if (priv->firmware_type == FIRMWARE_TYPE_INTERSIL) {
- dev_err(dev, "Support for Prism chipset is not enabled\n");
- return -ENODEV;
- }
-#endif
-
- return 0;
-}
-
-/* Read settings from EEPROM into our private structure.
- * MAC address gets dropped into callers buffer
- * Can be called before netdev registration.
- */
-int orinoco_hw_read_card_settings(struct orinoco_private *priv, u8 *dev_addr)
-{
- struct device *dev = priv->dev;
- struct hermes_idstring nickbuf;
- struct hermes *hw = &priv->hw;
- int len;
- int err;
- u16 reclen;
-
- /* Get the MAC address */
- err = hw->ops->read_ltv_pr(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
- ETH_ALEN, NULL, dev_addr);
- if (err) {
- dev_warn(dev, "Failed to read MAC address!\n");
- goto out;
- }
-
- dev_dbg(dev, "MAC address %pM\n", dev_addr);
-
- /* Get the station name */
- err = hw->ops->read_ltv_pr(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
- sizeof(nickbuf), &reclen, &nickbuf);
- if (err) {
- dev_err(dev, "failed to read station name\n");
- goto out;
- }
- if (nickbuf.len)
- len = min(IW_ESSID_MAX_SIZE, (int)le16_to_cpu(nickbuf.len));
- else
- len = min(IW_ESSID_MAX_SIZE, 2 * reclen);
- memcpy(priv->nick, &nickbuf.val, len);
- priv->nick[len] = '\0';
-
- dev_dbg(dev, "Station name \"%s\"\n", priv->nick);
-
- /* Get allowed channels */
- err = hermes_read_wordrec_pr(hw, USER_BAP, HERMES_RID_CHANNELLIST,
- &priv->channel_mask);
- if (err) {
- dev_err(dev, "Failed to read channel list!\n");
- goto out;
- }
-
- /* Get initial AP density */
- err = hermes_read_wordrec_pr(hw, USER_BAP, HERMES_RID_CNFSYSTEMSCALE,
- &priv->ap_density);
- if (err || priv->ap_density < 1 || priv->ap_density > 3)
- priv->has_sensitivity = 0;
-
- /* Get initial RTS threshold */
- err = hermes_read_wordrec_pr(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD,
- &priv->rts_thresh);
- if (err) {
- dev_err(dev, "Failed to read RTS threshold!\n");
- goto out;
- }
-
- /* Get initial fragmentation settings */
- if (priv->has_mwo)
- err = hermes_read_wordrec_pr(hw, USER_BAP,
- HERMES_RID_CNFMWOROBUST_AGERE,
- &priv->mwo_robust);
- else
- err = hermes_read_wordrec_pr(hw, USER_BAP,
- HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
- &priv->frag_thresh);
- if (err) {
- dev_err(dev, "Failed to read fragmentation settings!\n");
- goto out;
- }
-
- /* Power management setup */
- if (priv->has_pm) {
- priv->pm_on = 0;
- priv->pm_mcast = 1;
- err = hermes_read_wordrec_pr(hw, USER_BAP,
- HERMES_RID_CNFMAXSLEEPDURATION,
- &priv->pm_period);
- if (err) {
- dev_err(dev, "Failed to read power management "
- "period!\n");
- goto out;
- }
- err = hermes_read_wordrec_pr(hw, USER_BAP,
- HERMES_RID_CNFPMHOLDOVERDURATION,
- &priv->pm_timeout);
- if (err) {
- dev_err(dev, "Failed to read power management "
- "timeout!\n");
- goto out;
- }
- }
-
- /* Preamble setup */
- if (priv->has_preamble) {
- err = hermes_read_wordrec_pr(hw, USER_BAP,
- HERMES_RID_CNFPREAMBLE_SYMBOL,
- &priv->preamble);
- if (err) {
- dev_err(dev, "Failed to read preamble setup\n");
- goto out;
- }
- }
-
- /* Retry settings */
- err = hermes_read_wordrec_pr(hw, USER_BAP, HERMES_RID_SHORTRETRYLIMIT,
- &priv->short_retry_limit);
- if (err) {
- dev_err(dev, "Failed to read short retry limit\n");
- goto out;
- }
-
- err = hermes_read_wordrec_pr(hw, USER_BAP, HERMES_RID_LONGRETRYLIMIT,
- &priv->long_retry_limit);
- if (err) {
- dev_err(dev, "Failed to read long retry limit\n");
- goto out;
- }
-
- err = hermes_read_wordrec_pr(hw, USER_BAP, HERMES_RID_MAXTRANSMITLIFETIME,
- &priv->retry_lifetime);
- if (err) {
- dev_err(dev, "Failed to read max retry lifetime\n");
- goto out;
- }
-
-out:
- return err;
-}
-
-/* Can be called before netdev registration */
-int orinoco_hw_allocate_fid(struct orinoco_private *priv)
-{
- struct device *dev = priv->dev;
- struct hermes *hw = &priv->hw;
- int err;
-
- err = hw->ops->allocate(hw, priv->nicbuf_size, &priv->txfid);
- if (err == -EIO && priv->nicbuf_size > TX_NICBUF_SIZE_BUG) {
- /* Try workaround for old Symbol firmware bug */
- priv->nicbuf_size = TX_NICBUF_SIZE_BUG;
- err = hw->ops->allocate(hw, priv->nicbuf_size, &priv->txfid);
-
- dev_warn(dev, "Firmware ALLOC bug detected "
- "(old Symbol firmware?). Work around %s\n",
- err ? "failed!" : "ok.");
- }
-
- return err;
-}
-
-int orinoco_get_bitratemode(int bitrate, int automatic)
-{
- int ratemode = -1;
- int i;
-
- if ((bitrate != 10) && (bitrate != 20) &&
- (bitrate != 55) && (bitrate != 110))
- return ratemode;
-
- for (i = 0; i < BITRATE_TABLE_SIZE; i++) {
- if ((bitrate_table[i].bitrate == bitrate) &&
- (bitrate_table[i].automatic == automatic)) {
- ratemode = i;
- break;
- }
- }
- return ratemode;
-}
-
-void orinoco_get_ratemode_cfg(int ratemode, int *bitrate, int *automatic)
-{
- BUG_ON((ratemode < 0) || (ratemode >= BITRATE_TABLE_SIZE));
-
- *bitrate = bitrate_table[ratemode].bitrate * 100000;
- *automatic = bitrate_table[ratemode].automatic;
-}
-
-int orinoco_hw_program_rids(struct orinoco_private *priv)
-{
- struct net_device *dev = priv->ndev;
- struct wireless_dev *wdev = netdev_priv(dev);
- struct hermes *hw = &priv->hw;
- int err;
- struct hermes_idstring idbuf;
-
- /* Set the MAC address */
- err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
- HERMES_BYTES_TO_RECLEN(ETH_ALEN),
- dev->dev_addr);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting MAC address\n",
- dev->name, err);
- return err;
- }
-
- /* Set up the link mode */
- err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPORTTYPE,
- priv->port_type);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting port type\n",
- dev->name, err);
- return err;
- }
- /* Set the channel/frequency */
- if (priv->channel != 0 && priv->iw_mode != NL80211_IFTYPE_STATION) {
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFOWNCHANNEL,
- priv->channel);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting channel %d\n",
- dev->name, err, priv->channel);
- return err;
- }
- }
-
- if (priv->has_ibss) {
- u16 createibss;
-
- if ((strlen(priv->desired_essid) == 0) && (priv->createibss)) {
- printk(KERN_WARNING "%s: This firmware requires an "
- "ESSID in IBSS-Ad-Hoc mode.\n", dev->name);
- /* With wvlan_cs, in this case, we would crash.
- * hopefully, this driver will behave better...
- * Jean II */
- createibss = 0;
- } else {
- createibss = priv->createibss;
- }
-
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFCREATEIBSS,
- createibss);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting CREATEIBSS\n",
- dev->name, err);
- return err;
- }
- }
-
- /* Set the desired BSSID */
- err = __orinoco_hw_set_wap(priv);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting AP address\n",
- dev->name, err);
- return err;
- }
-
- /* Set the desired ESSID */
- idbuf.len = cpu_to_le16(strlen(priv->desired_essid));
- memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val));
- /* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */
- err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID,
- HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid) + 2),
- &idbuf);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting OWNSSID\n",
- dev->name, err);
- return err;
- }
- err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID,
- HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid) + 2),
- &idbuf);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting DESIREDSSID\n",
- dev->name, err);
- return err;
- }
-
- /* Set the station name */
- idbuf.len = cpu_to_le16(strlen(priv->nick));
- memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val));
- err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
- HERMES_BYTES_TO_RECLEN(strlen(priv->nick) + 2),
- &idbuf);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting nickname\n",
- dev->name, err);
- return err;
- }
-
- /* Set AP density */
- if (priv->has_sensitivity) {
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFSYSTEMSCALE,
- priv->ap_density);
- if (err) {
- printk(KERN_WARNING "%s: Error %d setting SYSTEMSCALE. "
- "Disabling sensitivity control\n",
- dev->name, err);
-
- priv->has_sensitivity = 0;
- }
- }
-
- /* Set RTS threshold */
- err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD,
- priv->rts_thresh);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting RTS threshold\n",
- dev->name, err);
- return err;
- }
-
- /* Set fragmentation threshold or MWO robustness */
- if (priv->has_mwo)
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFMWOROBUST_AGERE,
- priv->mwo_robust);
- else
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
- priv->frag_thresh);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting fragmentation\n",
- dev->name, err);
- return err;
- }
-
- /* Set bitrate */
- err = __orinoco_hw_set_bitrate(priv);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting bitrate\n",
- dev->name, err);
- return err;
- }
-
- /* Set power management */
- if (priv->has_pm) {
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFPMENABLED,
- priv->pm_on);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting up PM\n",
- dev->name, err);
- return err;
- }
-
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFMULTICASTRECEIVE,
- priv->pm_mcast);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting up PM\n",
- dev->name, err);
- return err;
- }
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFMAXSLEEPDURATION,
- priv->pm_period);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting up PM\n",
- dev->name, err);
- return err;
- }
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFPMHOLDOVERDURATION,
- priv->pm_timeout);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting up PM\n",
- dev->name, err);
- return err;
- }
- }
-
- /* Set preamble - only for Symbol so far... */
- if (priv->has_preamble) {
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFPREAMBLE_SYMBOL,
- priv->preamble);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting preamble\n",
- dev->name, err);
- return err;
- }
- }
-
- /* Set up encryption */
- if (priv->has_wep || priv->has_wpa) {
- err = __orinoco_hw_setup_enc(priv);
- if (err) {
- printk(KERN_ERR "%s: Error %d activating encryption\n",
- dev->name, err);
- return err;
- }
- }
-
- if (priv->iw_mode == NL80211_IFTYPE_MONITOR) {
- /* Enable monitor mode */
- dev->type = ARPHRD_IEEE80211;
- err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST |
- HERMES_TEST_MONITOR, 0, NULL);
- } else {
- /* Disable monitor mode */
- dev->type = ARPHRD_ETHER;
- err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST |
- HERMES_TEST_STOP, 0, NULL);
- }
- if (err)
- return err;
-
- /* Reset promiscuity / multicast*/
- priv->promiscuous = 0;
- priv->mc_count = 0;
-
- /* Record mode change */
- wdev->iftype = priv->iw_mode;
-
- return 0;
-}
-
-/* Get tsc from the firmware */
-int orinoco_hw_get_tkip_iv(struct orinoco_private *priv, int key, u8 *tsc)
-{
- struct hermes *hw = &priv->hw;
- int err = 0;
- u8 tsc_arr[4][ORINOCO_SEQ_LEN];
-
- if ((key < 0) || (key >= 4))
- return -EINVAL;
-
- err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_TKIP_IV,
- sizeof(tsc_arr), NULL, &tsc_arr);
- if (!err)
- memcpy(tsc, &tsc_arr[key][0], sizeof(tsc_arr[0]));
-
- return err;
-}
-
-int __orinoco_hw_set_bitrate(struct orinoco_private *priv)
-{
- struct hermes *hw = &priv->hw;
- int ratemode = priv->bitratemode;
- int err = 0;
-
- if (ratemode >= BITRATE_TABLE_SIZE) {
- printk(KERN_ERR "%s: BUG: Invalid bitrate mode %d\n",
- priv->ndev->name, ratemode);
- return -EINVAL;
- }
-
- switch (priv->firmware_type) {
- case FIRMWARE_TYPE_AGERE:
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFTXRATECONTROL,
- bitrate_table[ratemode].agere_txratectrl);
- break;
- case FIRMWARE_TYPE_INTERSIL:
- case FIRMWARE_TYPE_SYMBOL:
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFTXRATECONTROL,
- bitrate_table[ratemode].intersil_txratectrl);
- break;
- default:
- BUG();
- }
-
- return err;
-}
-
-int orinoco_hw_get_act_bitrate(struct orinoco_private *priv, int *bitrate)
-{
- struct hermes *hw = &priv->hw;
- int i;
- int err = 0;
- u16 val;
-
- err = hermes_read_wordrec(hw, USER_BAP,
- HERMES_RID_CURRENTTXRATE, &val);
- if (err)
- return err;
-
- switch (priv->firmware_type) {
- case FIRMWARE_TYPE_AGERE: /* Lucent style rate */
- /* Note : in Lucent firmware, the return value of
- * HERMES_RID_CURRENTTXRATE is the bitrate in Mb/s,
- * and therefore is totally different from the
- * encoding of HERMES_RID_CNFTXRATECONTROL.
- * Don't forget that 6Mb/s is really 5.5Mb/s */
- if (val == 6)
- *bitrate = 5500000;
- else
- *bitrate = val * 1000000;
- break;
- case FIRMWARE_TYPE_INTERSIL: /* Intersil style rate */
- case FIRMWARE_TYPE_SYMBOL: /* Symbol style rate */
- for (i = 0; i < BITRATE_TABLE_SIZE; i++)
- if (bitrate_table[i].intersil_txratectrl == val) {
- *bitrate = bitrate_table[i].bitrate * 100000;
- break;
- }
-
- if (i >= BITRATE_TABLE_SIZE) {
- printk(KERN_INFO "%s: Unable to determine current bitrate (0x%04hx)\n",
- priv->ndev->name, val);
- err = -EIO;
- }
-
- break;
- default:
- BUG();
- }
-
- return err;
-}
-
-/* Set fixed AP address */
-int __orinoco_hw_set_wap(struct orinoco_private *priv)
-{
- int roaming_flag;
- int err = 0;
- struct hermes *hw = &priv->hw;
-
- switch (priv->firmware_type) {
- case FIRMWARE_TYPE_AGERE:
- /* not supported */
- break;
- case FIRMWARE_TYPE_INTERSIL:
- if (priv->bssid_fixed)
- roaming_flag = 2;
- else
- roaming_flag = 1;
-
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFROAMINGMODE,
- roaming_flag);
- break;
- case FIRMWARE_TYPE_SYMBOL:
- err = HERMES_WRITE_RECORD(hw, USER_BAP,
- HERMES_RID_CNFMANDATORYBSSID_SYMBOL,
- &priv->desired_bssid);
- break;
- }
- return err;
-}
-
-/* Change the WEP keys and/or the current keys. Can be called
- * either from __orinoco_hw_setup_enc() or directly from
- * orinoco_ioctl_setiwencode(). In the later case the association
- * with the AP is not broken (if the firmware can handle it),
- * which is needed for 802.1x implementations. */
-int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv)
-{
- struct hermes *hw = &priv->hw;
- int err = 0;
- int i;
-
- switch (priv->firmware_type) {
- case FIRMWARE_TYPE_AGERE:
- {
- struct orinoco_key keys[ORINOCO_MAX_KEYS];
-
- memset(&keys, 0, sizeof(keys));
- for (i = 0; i < ORINOCO_MAX_KEYS; i++) {
- int len = min(priv->keys[i].key_len,
- ORINOCO_MAX_KEY_SIZE);
- memcpy(&keys[i].data, priv->keys[i].key, len);
- if (len > SMALL_KEY_SIZE)
- keys[i].len = cpu_to_le16(LARGE_KEY_SIZE);
- else if (len > 0)
- keys[i].len = cpu_to_le16(SMALL_KEY_SIZE);
- else
- keys[i].len = cpu_to_le16(0);
- }
-
- err = HERMES_WRITE_RECORD(hw, USER_BAP,
- HERMES_RID_CNFWEPKEYS_AGERE,
- &keys);
- if (err)
- return err;
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFTXKEY_AGERE,
- priv->tx_key);
- if (err)
- return err;
- break;
- }
- case FIRMWARE_TYPE_INTERSIL:
- case FIRMWARE_TYPE_SYMBOL:
- {
- int keylen;
-
- /* Force uniform key length to work around
- * firmware bugs */
- keylen = priv->keys[priv->tx_key].key_len;
-
- if (keylen > LARGE_KEY_SIZE) {
- printk(KERN_ERR "%s: BUG: Key %d has oversize length %d.\n",
- priv->ndev->name, priv->tx_key, keylen);
- return -E2BIG;
- } else if (keylen > SMALL_KEY_SIZE)
- keylen = LARGE_KEY_SIZE;
- else if (keylen > 0)
- keylen = SMALL_KEY_SIZE;
- else
- keylen = 0;
-
- /* Write all 4 keys */
- for (i = 0; i < ORINOCO_MAX_KEYS; i++) {
- u8 key[LARGE_KEY_SIZE] = { 0 };
-
- memcpy(key, priv->keys[i].key,
- priv->keys[i].key_len);
-
- err = hw->ops->write_ltv(hw, USER_BAP,
- HERMES_RID_CNFDEFAULTKEY0 + i,
- HERMES_BYTES_TO_RECLEN(keylen),
- key);
- if (err)
- return err;
- }
-
- /* Write the index of the key used in transmission */
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFWEPDEFAULTKEYID,
- priv->tx_key);
- if (err)
- return err;
- }
- break;
- }
-
- return 0;
-}
-
-int __orinoco_hw_setup_enc(struct orinoco_private *priv)
-{
- struct hermes *hw = &priv->hw;
- int err = 0;
- int master_wep_flag;
- int auth_flag;
- int enc_flag;
-
- /* Setup WEP keys */
- if (priv->encode_alg == ORINOCO_ALG_WEP)
- __orinoco_hw_setup_wepkeys(priv);
-
- if (priv->wep_restrict)
- auth_flag = HERMES_AUTH_SHARED_KEY;
- else
- auth_flag = HERMES_AUTH_OPEN;
-
- if (priv->wpa_enabled)
- enc_flag = 2;
- else if (priv->encode_alg == ORINOCO_ALG_WEP)
- enc_flag = 1;
- else
- enc_flag = 0;
-
- switch (priv->firmware_type) {
- case FIRMWARE_TYPE_AGERE: /* Agere style WEP */
- if (priv->encode_alg == ORINOCO_ALG_WEP) {
- /* Enable the shared-key authentication. */
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFAUTHENTICATION_AGERE,
- auth_flag);
- if (err)
- return err;
- }
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFWEPENABLED_AGERE,
- enc_flag);
- if (err)
- return err;
-
- if (priv->has_wpa) {
- /* Set WPA key management */
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFSETWPAAUTHMGMTSUITE_AGERE,
- priv->key_mgmt);
- if (err)
- return err;
- }
-
- break;
-
- case FIRMWARE_TYPE_INTERSIL: /* Intersil style WEP */
- case FIRMWARE_TYPE_SYMBOL: /* Symbol style WEP */
- if (priv->encode_alg == ORINOCO_ALG_WEP) {
- if (priv->wep_restrict ||
- (priv->firmware_type == FIRMWARE_TYPE_SYMBOL))
- master_wep_flag = HERMES_WEP_PRIVACY_INVOKED |
- HERMES_WEP_EXCL_UNENCRYPTED;
- else
- master_wep_flag = HERMES_WEP_PRIVACY_INVOKED;
-
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFAUTHENTICATION,
- auth_flag);
- if (err)
- return err;
- } else
- master_wep_flag = 0;
-
- if (priv->iw_mode == NL80211_IFTYPE_MONITOR)
- master_wep_flag |= HERMES_WEP_HOST_DECRYPT;
-
- /* Master WEP setting : on/off */
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFWEPFLAGS_INTERSIL,
- master_wep_flag);
- if (err)
- return err;
-
- break;
- }
-
- return 0;
-}
-
-/* key must be 32 bytes, including the tx and rx MIC keys.
- * rsc must be NULL or up to 8 bytes
- * tsc must be NULL or up to 8 bytes
- */
-int __orinoco_hw_set_tkip_key(struct orinoco_private *priv, int key_idx,
- int set_tx, const u8 *key, size_t key_len,
- const u8 *rsc, size_t rsc_len,
- const u8 *tsc, size_t tsc_len)
-{
- struct {
- __le16 idx;
- u8 rsc[ORINOCO_SEQ_LEN];
- struct {
- u8 key[TKIP_KEYLEN];
- u8 tx_mic[MIC_KEYLEN];
- u8 rx_mic[MIC_KEYLEN];
- } tkip;
- u8 tsc[ORINOCO_SEQ_LEN];
- } __packed buf;
- struct hermes *hw = &priv->hw;
- int ret;
- int err;
- int k;
- u16 xmitting;
-
- key_idx &= 0x3;
-
- if (set_tx)
- key_idx |= 0x8000;
-
- buf.idx = cpu_to_le16(key_idx);
- if (key_len != sizeof(buf.tkip))
- return -EINVAL;
- memcpy(&buf.tkip, key, sizeof(buf.tkip));
-
- if (rsc_len > sizeof(buf.rsc))
- rsc_len = sizeof(buf.rsc);
-
- if (tsc_len > sizeof(buf.tsc))
- tsc_len = sizeof(buf.tsc);
-
- memset(buf.rsc, 0, sizeof(buf.rsc));
- memset(buf.tsc, 0, sizeof(buf.tsc));
-
- if (rsc != NULL)
- memcpy(buf.rsc, rsc, rsc_len);
-
- if (tsc != NULL)
- memcpy(buf.tsc, tsc, tsc_len);
- else
- buf.tsc[4] = 0x10;
-
- /* Wait up to 100ms for tx queue to empty */
- for (k = 100; k > 0; k--) {
- udelay(1000);
- ret = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_TXQUEUEEMPTY,
- &xmitting);
- if (ret || !xmitting)
- break;
- }
-
- if (k == 0)
- ret = -ETIMEDOUT;
-
- err = HERMES_WRITE_RECORD(hw, USER_BAP,
- HERMES_RID_CNFADDDEFAULTTKIPKEY_AGERE,
- &buf);
-
- return ret ? ret : err;
-}
-
-int orinoco_clear_tkip_key(struct orinoco_private *priv, int key_idx)
-{
- struct hermes *hw = &priv->hw;
- int err;
-
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFREMDEFAULTTKIPKEY_AGERE,
- key_idx);
- if (err)
- printk(KERN_WARNING "%s: Error %d clearing TKIP key %d\n",
- priv->ndev->name, err, key_idx);
- return err;
-}
-
-int __orinoco_hw_set_multicast_list(struct orinoco_private *priv,
- struct net_device *dev,
- int mc_count, int promisc)
-{
- struct hermes *hw = &priv->hw;
- int err = 0;
-
- if (promisc != priv->promiscuous) {
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFPROMISCUOUSMODE,
- promisc);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting PROMISCUOUSMODE to 1.\n",
- priv->ndev->name, err);
- } else
- priv->promiscuous = promisc;
- }
-
- /* If we're not in promiscuous mode, then we need to set the
- * group address if either we want to multicast, or if we were
- * multicasting and want to stop */
- if (!promisc && (mc_count || priv->mc_count)) {
- struct netdev_hw_addr *ha;
- struct hermes_multicast mclist;
- int i = 0;
-
- netdev_for_each_mc_addr(ha, dev) {
- if (i == mc_count)
- break;
- memcpy(mclist.addr[i++], ha->addr, ETH_ALEN);
- }
-
- err = hw->ops->write_ltv(hw, USER_BAP,
- HERMES_RID_CNFGROUPADDRESSES,
- HERMES_BYTES_TO_RECLEN(mc_count * ETH_ALEN),
- &mclist);
- if (err)
- printk(KERN_ERR "%s: Error %d setting multicast list.\n",
- priv->ndev->name, err);
- else
- priv->mc_count = mc_count;
- }
- return err;
-}
-
-/* Return : < 0 -> error code ; >= 0 -> length */
-int orinoco_hw_get_essid(struct orinoco_private *priv, int *active,
- char buf[IW_ESSID_MAX_SIZE + 1])
-{
- struct hermes *hw = &priv->hw;
- int err = 0;
- struct hermes_idstring essidbuf;
- char *p = (char *)(&essidbuf.val);
- int len;
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- if (strlen(priv->desired_essid) > 0) {
- /* We read the desired SSID from the hardware rather
- than from priv->desired_essid, just in case the
- firmware is allowed to change it on us. I'm not
- sure about this */
- /* My guess is that the OWNSSID should always be whatever
- * we set to the card, whereas CURRENT_SSID is the one that
- * may change... - Jean II */
- u16 rid;
-
- *active = 1;
-
- rid = (priv->port_type == 3) ? HERMES_RID_CNFOWNSSID :
- HERMES_RID_CNFDESIREDSSID;
-
- err = hw->ops->read_ltv(hw, USER_BAP, rid, sizeof(essidbuf),
- NULL, &essidbuf);
- if (err)
- goto fail_unlock;
- } else {
- *active = 0;
-
- err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENTSSID,
- sizeof(essidbuf), NULL, &essidbuf);
- if (err)
- goto fail_unlock;
- }
-
- len = le16_to_cpu(essidbuf.len);
- BUG_ON(len > IW_ESSID_MAX_SIZE);
-
- memset(buf, 0, IW_ESSID_MAX_SIZE);
- memcpy(buf, p, len);
- err = len;
-
- fail_unlock:
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-
-int orinoco_hw_get_freq(struct orinoco_private *priv)
-{
- struct hermes *hw = &priv->hw;
- int err = 0;
- u16 channel;
- int freq = 0;
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CURRENTCHANNEL,
- &channel);
- if (err)
- goto out;
-
- /* Intersil firmware 1.3.5 returns 0 when the interface is down */
- if (channel == 0) {
- err = -EBUSY;
- goto out;
- }
-
- if ((channel < 1) || (channel > NUM_CHANNELS)) {
- printk(KERN_WARNING "%s: Channel out of range (%d)!\n",
- priv->ndev->name, channel);
- err = -EBUSY;
- goto out;
-
- }
- freq = ieee80211_channel_to_frequency(channel, NL80211_BAND_2GHZ);
-
- out:
- orinoco_unlock(priv, &flags);
-
- if (err > 0)
- err = -EBUSY;
- return err ? err : freq;
-}
-
-int orinoco_hw_get_bitratelist(struct orinoco_private *priv,
- int *numrates, s32 *rates, int max)
-{
- struct hermes *hw = &priv->hw;
- struct hermes_idstring list;
- unsigned char *p = (unsigned char *)&list.val;
- int err = 0;
- int num;
- int i;
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_SUPPORTEDDATARATES,
- sizeof(list), NULL, &list);
- orinoco_unlock(priv, &flags);
-
- if (err)
- return err;
-
- num = le16_to_cpu(list.len);
- *numrates = num;
- num = min(num, max);
-
- for (i = 0; i < num; i++)
- rates[i] = (p[i] & 0x7f) * 500000; /* convert to bps */
-
- return 0;
-}
-
-int orinoco_hw_trigger_scan(struct orinoco_private *priv,
- const struct cfg80211_ssid *ssid)
-{
- struct net_device *dev = priv->ndev;
- struct hermes *hw = &priv->hw;
- unsigned long flags;
- int err = 0;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- /* Scanning with port 0 disabled would fail */
- if (!netif_running(dev)) {
- err = -ENETDOWN;
- goto out;
- }
-
- /* In monitor mode, the scan results are always empty.
- * Probe responses are passed to the driver as received
- * frames and could be processed in software. */
- if (priv->iw_mode == NL80211_IFTYPE_MONITOR) {
- err = -EOPNOTSUPP;
- goto out;
- }
-
- if (priv->has_hostscan) {
- switch (priv->firmware_type) {
- case FIRMWARE_TYPE_SYMBOL:
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFHOSTSCAN_SYMBOL,
- HERMES_HOSTSCAN_SYMBOL_ONCE |
- HERMES_HOSTSCAN_SYMBOL_BCAST);
- break;
- case FIRMWARE_TYPE_INTERSIL: {
- __le16 req[3];
-
- req[0] = cpu_to_le16(0x3fff); /* All channels */
- req[1] = cpu_to_le16(0x0001); /* rate 1 Mbps */
- req[2] = 0; /* Any ESSID */
- err = HERMES_WRITE_RECORD(hw, USER_BAP,
- HERMES_RID_CNFHOSTSCAN, &req);
- break;
- }
- case FIRMWARE_TYPE_AGERE:
- if (ssid->ssid_len > 0) {
- struct hermes_idstring idbuf;
- size_t len = ssid->ssid_len;
-
- idbuf.len = cpu_to_le16(len);
- memcpy(idbuf.val, ssid->ssid, len);
-
- err = hw->ops->write_ltv(hw, USER_BAP,
- HERMES_RID_CNFSCANSSID_AGERE,
- HERMES_BYTES_TO_RECLEN(len + 2),
- &idbuf);
- } else
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFSCANSSID_AGERE,
- 0); /* Any ESSID */
- if (err)
- break;
-
- if (priv->has_ext_scan) {
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFSCANCHANNELS2GHZ,
- 0x7FFF);
- if (err)
- goto out;
-
- err = hermes_inquire(hw,
- HERMES_INQ_CHANNELINFO);
- } else
- err = hermes_inquire(hw, HERMES_INQ_SCAN);
-
- break;
- }
- } else
- err = hermes_inquire(hw, HERMES_INQ_SCAN);
-
- out:
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-
-/* Disassociate from node with BSSID addr */
-int orinoco_hw_disassociate(struct orinoco_private *priv,
- u8 *addr, u16 reason_code)
-{
- struct hermes *hw = &priv->hw;
- int err;
-
- struct {
- u8 addr[ETH_ALEN];
- __le16 reason_code;
- } __packed buf;
-
- /* Currently only supported by WPA enabled Agere fw */
- if (!priv->has_wpa)
- return -EOPNOTSUPP;
-
- memcpy(buf.addr, addr, ETH_ALEN);
- buf.reason_code = cpu_to_le16(reason_code);
- err = HERMES_WRITE_RECORD(hw, USER_BAP,
- HERMES_RID_CNFDISASSOCIATE,
- &buf);
- return err;
-}
-
-int orinoco_hw_get_current_bssid(struct orinoco_private *priv,
- u8 *addr)
-{
- struct hermes *hw = &priv->hw;
- int err;
-
- err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID,
- ETH_ALEN, NULL, addr);
-
- return err;
-}
diff --git a/drivers/net/wireless/intersil/orinoco/hw.h b/drivers/net/wireless/intersil/orinoco/hw.h
deleted file mode 100644
index da5804dbdf34..000000000000
--- a/drivers/net/wireless/intersil/orinoco/hw.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* Encapsulate basic setting changes on Hermes hardware
- *
- * See copyright notice in main.c
- */
-#ifndef _ORINOCO_HW_H_
-#define _ORINOCO_HW_H_
-
-#include <linux/types.h>
-#include <linux/wireless.h>
-#include <net/cfg80211.h>
-
-/* Hardware BAPs */
-#define USER_BAP 0
-#define IRQ_BAP 1
-
-/* WEP key sizes */
-#define SMALL_KEY_SIZE 5
-#define LARGE_KEY_SIZE 13
-
-/* Number of supported channels */
-#define NUM_CHANNELS 14
-
-/* Forward declarations */
-struct orinoco_private;
-
-int determine_fw_capabilities(struct orinoco_private *priv, char *fw_name,
- size_t fw_name_len, u32 *hw_ver);
-int orinoco_hw_read_card_settings(struct orinoco_private *priv, u8 *dev_addr);
-int orinoco_hw_allocate_fid(struct orinoco_private *priv);
-int orinoco_get_bitratemode(int bitrate, int automatic);
-void orinoco_get_ratemode_cfg(int ratemode, int *bitrate, int *automatic);
-
-int orinoco_hw_program_rids(struct orinoco_private *priv);
-int orinoco_hw_get_tkip_iv(struct orinoco_private *priv, int key, u8 *tsc);
-int __orinoco_hw_set_bitrate(struct orinoco_private *priv);
-int orinoco_hw_get_act_bitrate(struct orinoco_private *priv, int *bitrate);
-int __orinoco_hw_set_wap(struct orinoco_private *priv);
-int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv);
-int __orinoco_hw_setup_enc(struct orinoco_private *priv);
-int __orinoco_hw_set_tkip_key(struct orinoco_private *priv, int key_idx,
- int set_tx, const u8 *key, size_t key_len,
- const u8 *rsc, size_t rsc_len,
- const u8 *tsc, size_t tsc_len);
-int orinoco_clear_tkip_key(struct orinoco_private *priv, int key_idx);
-int __orinoco_hw_set_multicast_list(struct orinoco_private *priv,
- struct net_device *dev,
- int mc_count, int promisc);
-int orinoco_hw_get_essid(struct orinoco_private *priv, int *active,
- char buf[IW_ESSID_MAX_SIZE + 1]);
-int orinoco_hw_get_freq(struct orinoco_private *priv);
-int orinoco_hw_get_bitratelist(struct orinoco_private *priv,
- int *numrates, s32 *rates, int max);
-int orinoco_hw_trigger_scan(struct orinoco_private *priv,
- const struct cfg80211_ssid *ssid);
-int orinoco_hw_disassociate(struct orinoco_private *priv,
- u8 *addr, u16 reason_code);
-int orinoco_hw_get_current_bssid(struct orinoco_private *priv,
- u8 *addr);
-
-#endif /* _ORINOCO_HW_H_ */
diff --git a/drivers/net/wireless/intersil/orinoco/main.c b/drivers/net/wireless/intersil/orinoco/main.c
deleted file mode 100644
index 7df88d20ff3d..000000000000
--- a/drivers/net/wireless/intersil/orinoco/main.c
+++ /dev/null
@@ -1,2414 +0,0 @@
-/* main.c - (formerly known as dldwd_cs.c, orinoco_cs.c and orinoco.c)
- *
- * A driver for Hermes or Prism 2 chipset based PCMCIA wireless
- * adaptors, with Lucent/Agere, Intersil or Symbol firmware.
- *
- * Current maintainers (as of 29 September 2003) are:
- * Pavel Roskin <proski AT gnu.org>
- * and David Gibson <hermes AT gibson.dropbear.id.au>
- *
- * (C) Copyright David Gibson, IBM Corporation 2001-2003.
- * Copyright (C) 2000 David Gibson, Linuxcare Australia.
- * With some help from :
- * Copyright (C) 2001 Jean Tourrilhes, HP Labs
- * Copyright (C) 2001 Benjamin Herrenschmidt
- *
- * Based on dummy_cs.c 1.27 2000/06/12 21:27:25
- *
- * Portions based on wvlan_cs.c 1.0.6, Copyright Andreas Neuhaus <andy
- * AT fasta.fh-dortmund.de>
- * http://www.stud.fh-dortmund.de/~andy/wvlan/
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds AT users.sourceforge.net>. Portions created by David
- * A. Hinds are Copyright (C) 1999 David A. Hinds. All Rights
- * Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL. */
-
-/*
- * TODO
- * o Handle de-encapsulation within network layer, provide 802.11
- * headers (patch from Thomas 'Dent' Mirlacher)
- * o Fix possible races in SPY handling.
- * o Disconnect wireless extensions from fundamental configuration.
- * o (maybe) Software WEP support (patch from Stano Meduna).
- * o (maybe) Use multiple Tx buffers - driver handling queue
- * rather than firmware.
- */
-
-/* Locking and synchronization:
- *
- * The basic principle is that everything is serialized through a
- * single spinlock, priv->lock. The lock is used in user, bh and irq
- * context, so when taken outside hardirq context it should always be
- * taken with interrupts disabled. The lock protects both the
- * hardware and the struct orinoco_private.
- *
- * Another flag, priv->hw_unavailable indicates that the hardware is
- * unavailable for an extended period of time (e.g. suspended, or in
- * the middle of a hard reset). This flag is protected by the
- * spinlock. All code which touches the hardware should check the
- * flag after taking the lock, and if it is set, give up on whatever
- * they are doing and drop the lock again. The orinoco_lock()
- * function handles this (it unlocks and returns -EBUSY if
- * hw_unavailable is non-zero).
- */
-
-#define DRIVER_NAME "orinoco"
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/suspend.h>
-#include <linux/if_arp.h>
-#include <linux/wireless.h>
-#include <linux/ieee80211.h>
-#include <net/iw_handler.h>
-#include <net/cfg80211.h>
-
-#include "hermes_rid.h"
-#include "hermes_dld.h"
-#include "hw.h"
-#include "scan.h"
-#include "mic.h"
-#include "fw.h"
-#include "wext.h"
-#include "cfg.h"
-#include "main.h"
-
-#include "orinoco.h"
-
-/********************************************************************/
-/* Module information */
-/********************************************************************/
-
-MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> & "
- "David Gibson <hermes@gibson.dropbear.id.au>");
-MODULE_DESCRIPTION("Driver for Lucent Orinoco, Prism II based "
- "and similar wireless cards");
-MODULE_LICENSE("Dual MPL/GPL");
-
-/* Level of debugging. Used in the macros in orinoco.h */
-#ifdef ORINOCO_DEBUG
-int orinoco_debug = ORINOCO_DEBUG;
-EXPORT_SYMBOL(orinoco_debug);
-module_param(orinoco_debug, int, 0644);
-MODULE_PARM_DESC(orinoco_debug, "Debug level");
-#endif
-
-static bool suppress_linkstatus; /* = 0 */
-module_param(suppress_linkstatus, bool, 0644);
-MODULE_PARM_DESC(suppress_linkstatus, "Don't log link status changes");
-
-static int ignore_disconnect; /* = 0 */
-module_param(ignore_disconnect, int, 0644);
-MODULE_PARM_DESC(ignore_disconnect,
- "Don't report lost link to the network layer");
-
-int force_monitor; /* = 0 */
-module_param(force_monitor, int, 0644);
-MODULE_PARM_DESC(force_monitor, "Allow monitor mode for all firmware versions");
-
-/********************************************************************/
-/* Internal constants */
-/********************************************************************/
-
-/* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */
-static const u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00};
-#define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2)
-
-#define ORINOCO_MIN_MTU 256
-#define ORINOCO_MAX_MTU (IEEE80211_MAX_DATA_LEN - ENCAPS_OVERHEAD)
-
-#define MAX_IRQLOOPS_PER_IRQ 10
-#define MAX_IRQLOOPS_PER_JIFFY (20000 / HZ) /* Based on a guestimate of
- * how many events the
- * device could
- * legitimately generate */
-
-#define DUMMY_FID 0xFFFF
-
-/*#define MAX_MULTICAST(priv) (priv->firmware_type == FIRMWARE_TYPE_AGERE ? \
- HERMES_MAX_MULTICAST : 0)*/
-#define MAX_MULTICAST(priv) (HERMES_MAX_MULTICAST)
-
-#define ORINOCO_INTEN (HERMES_EV_RX | HERMES_EV_ALLOC \
- | HERMES_EV_TX | HERMES_EV_TXEXC \
- | HERMES_EV_WTERR | HERMES_EV_INFO \
- | HERMES_EV_INFDROP)
-
-/********************************************************************/
-/* Data types */
-/********************************************************************/
-
-/* Beginning of the Tx descriptor, used in TxExc handling */
-struct hermes_txexc_data {
- struct hermes_tx_descriptor desc;
- __le16 frame_ctl;
- __le16 duration_id;
- u8 addr1[ETH_ALEN];
-} __packed;
-
-/* Rx frame header except compatibility 802.3 header */
-struct hermes_rx_descriptor {
- /* Control */
- __le16 status;
- __le32 time;
- u8 silence;
- u8 signal;
- u8 rate;
- u8 rxflow;
- __le32 reserved;
-
- /* 802.11 header */
- __le16 frame_ctl;
- __le16 duration_id;
- u8 addr1[ETH_ALEN];
- u8 addr2[ETH_ALEN];
- u8 addr3[ETH_ALEN];
- __le16 seq_ctl;
- u8 addr4[ETH_ALEN];
-
- /* Data length */
- __le16 data_len;
-} __packed;
-
-struct orinoco_rx_data {
- struct hermes_rx_descriptor *desc;
- struct sk_buff *skb;
- struct list_head list;
-};
-
-struct orinoco_scan_data {
- void *buf;
- size_t len;
- int type;
- struct list_head list;
-};
-
-/********************************************************************/
-/* Function prototypes */
-/********************************************************************/
-
-static int __orinoco_set_multicast_list(struct net_device *dev);
-static int __orinoco_up(struct orinoco_private *priv);
-static int __orinoco_down(struct orinoco_private *priv);
-static int __orinoco_commit(struct orinoco_private *priv);
-
-/********************************************************************/
-/* Internal helper functions */
-/********************************************************************/
-
-void set_port_type(struct orinoco_private *priv)
-{
- switch (priv->iw_mode) {
- case NL80211_IFTYPE_STATION:
- priv->port_type = 1;
- priv->createibss = 0;
- break;
- case NL80211_IFTYPE_ADHOC:
- if (priv->prefer_port3) {
- priv->port_type = 3;
- priv->createibss = 0;
- } else {
- priv->port_type = priv->ibss_port;
- priv->createibss = 1;
- }
- break;
- case NL80211_IFTYPE_MONITOR:
- priv->port_type = 3;
- priv->createibss = 0;
- break;
- default:
- printk(KERN_ERR "%s: Invalid priv->iw_mode in set_port_type()\n",
- priv->ndev->name);
- }
-}
-
-/********************************************************************/
-/* Device methods */
-/********************************************************************/
-
-int orinoco_open(struct net_device *dev)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- unsigned long flags;
- int err;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- err = __orinoco_up(priv);
-
- if (!err)
- priv->open = 1;
-
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-EXPORT_SYMBOL(orinoco_open);
-
-int orinoco_stop(struct net_device *dev)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- int err = 0;
-
- /* We mustn't use orinoco_lock() here, because we need to be
- able to close the interface even if hw_unavailable is set
- (e.g. as we're released after a PC Card removal) */
- orinoco_lock_irq(priv);
-
- priv->open = 0;
-
- err = __orinoco_down(priv);
-
- orinoco_unlock_irq(priv);
-
- return err;
-}
-EXPORT_SYMBOL(orinoco_stop);
-
-void orinoco_set_multicast_list(struct net_device *dev)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0) {
- printk(KERN_DEBUG "%s: orinoco_set_multicast_list() "
- "called when hw_unavailable\n", dev->name);
- return;
- }
-
- __orinoco_set_multicast_list(dev);
- orinoco_unlock(priv, &flags);
-}
-EXPORT_SYMBOL(orinoco_set_multicast_list);
-
-int orinoco_change_mtu(struct net_device *dev, int new_mtu)
-{
- struct orinoco_private *priv = ndev_priv(dev);
-
- /* MTU + encapsulation + header length */
- if ((new_mtu + ENCAPS_OVERHEAD + sizeof(struct ieee80211_hdr)) >
- (priv->nicbuf_size - ETH_HLEN))
- return -EINVAL;
-
- dev->mtu = new_mtu;
-
- return 0;
-}
-EXPORT_SYMBOL(orinoco_change_mtu);
-
-/********************************************************************/
-/* Tx path */
-/********************************************************************/
-
-/* Add encapsulation and MIC to the existing SKB.
- * The main xmit routine will then send the whole lot to the card.
- * Need 8 bytes headroom
- * Need 8 bytes tailroom
- *
- * With encapsulated ethernet II frame
- * --------
- * 803.3 header (14 bytes)
- * dst[6]
- * -------- src[6]
- * 803.3 header (14 bytes) len[2]
- * dst[6] 803.2 header (8 bytes)
- * src[6] encaps[6]
- * len[2] <- leave alone -> len[2]
- * -------- -------- <-- 0
- * Payload Payload
- * ... ...
- *
- * -------- --------
- * MIC (8 bytes)
- * --------
- *
- * returns 0 on success, -ENOMEM on error.
- */
-int orinoco_process_xmit_skb(struct sk_buff *skb,
- struct net_device *dev,
- struct orinoco_private *priv,
- int *tx_control,
- u8 *mic_buf)
-{
- struct orinoco_tkip_key *key;
- struct ethhdr *eh;
- int do_mic;
-
- key = (struct orinoco_tkip_key *) priv->keys[priv->tx_key].key;
-
- do_mic = ((priv->encode_alg == ORINOCO_ALG_TKIP) &&
- (key != NULL));
-
- if (do_mic)
- *tx_control |= (priv->tx_key << HERMES_MIC_KEY_ID_SHIFT) |
- HERMES_TXCTRL_MIC;
-
- eh = (struct ethhdr *)skb->data;
-
- /* Encapsulate Ethernet-II frames */
- if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */
- struct header_struct {
- struct ethhdr eth; /* 802.3 header */
- u8 encap[6]; /* 802.2 header */
- } __packed hdr;
- int len = skb->len + sizeof(encaps_hdr) - (2 * ETH_ALEN);
-
- if (skb_headroom(skb) < ENCAPS_OVERHEAD) {
- if (net_ratelimit())
- printk(KERN_ERR
- "%s: Not enough headroom for 802.2 headers %d\n",
- dev->name, skb_headroom(skb));
- return -ENOMEM;
- }
-
- /* Fill in new header */
- memcpy(&hdr.eth, eh, 2 * ETH_ALEN);
- hdr.eth.h_proto = htons(len);
- memcpy(hdr.encap, encaps_hdr, sizeof(encaps_hdr));
-
- /* Make room for the new header, and copy it in */
- eh = skb_push(skb, ENCAPS_OVERHEAD);
- memcpy(eh, &hdr, sizeof(hdr));
- }
-
- /* Calculate Michael MIC */
- if (do_mic) {
- size_t len = skb->len - ETH_HLEN;
- u8 *mic = &mic_buf[0];
-
- /* Have to write to an even address, so copy the spare
- * byte across */
- if (skb->len % 2) {
- *mic = skb->data[skb->len - 1];
- mic++;
- }
-
- orinoco_mic(priv->tx_tfm_mic, key->tx_mic,
- eh->h_dest, eh->h_source, 0 /* priority */,
- skb->data + ETH_HLEN,
- len, mic);
- }
-
- return 0;
-}
-EXPORT_SYMBOL(orinoco_process_xmit_skb);
-
-static netdev_tx_t orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- struct net_device_stats *stats = &dev->stats;
- struct hermes *hw = &priv->hw;
- int err = 0;
- u16 txfid = priv->txfid;
- int tx_control;
- unsigned long flags;
- u8 mic_buf[MICHAEL_MIC_LEN + 1];
-
- if (!netif_running(dev)) {
- printk(KERN_ERR "%s: Tx on stopped device!\n",
- dev->name);
- return NETDEV_TX_BUSY;
- }
-
- if (netif_queue_stopped(dev)) {
- printk(KERN_DEBUG "%s: Tx while transmitter busy!\n",
- dev->name);
- return NETDEV_TX_BUSY;
- }
-
- if (orinoco_lock(priv, &flags) != 0) {
- printk(KERN_ERR "%s: orinoco_xmit() called while hw_unavailable\n",
- dev->name);
- return NETDEV_TX_BUSY;
- }
-
- if (!netif_carrier_ok(dev) ||
- (priv->iw_mode == NL80211_IFTYPE_MONITOR)) {
- /* Oops, the firmware hasn't established a connection,
- silently drop the packet (this seems to be the
- safest approach). */
- goto drop;
- }
-
- /* Check packet length */
- if (skb->len < ETH_HLEN)
- goto drop;
-
- tx_control = HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX;
-
- err = orinoco_process_xmit_skb(skb, dev, priv, &tx_control,
- &mic_buf[0]);
- if (err)
- goto drop;
-
- if (priv->has_alt_txcntl) {
- /* WPA enabled firmwares have tx_cntl at the end of
- * the 802.11 header. So write zeroed descriptor and
- * 802.11 header at the same time
- */
- char desc[HERMES_802_3_OFFSET];
- __le16 *txcntl = (__le16 *) &desc[HERMES_TXCNTL2_OFFSET];
-
- memset(&desc, 0, sizeof(desc));
-
- *txcntl = cpu_to_le16(tx_control);
- err = hw->ops->bap_pwrite(hw, USER_BAP, &desc, sizeof(desc),
- txfid, 0);
- if (err) {
- if (net_ratelimit())
- printk(KERN_ERR "%s: Error %d writing Tx "
- "descriptor to BAP\n", dev->name, err);
- goto busy;
- }
- } else {
- struct hermes_tx_descriptor desc;
-
- memset(&desc, 0, sizeof(desc));
-
- desc.tx_control = cpu_to_le16(tx_control);
- err = hw->ops->bap_pwrite(hw, USER_BAP, &desc, sizeof(desc),
- txfid, 0);
- if (err) {
- if (net_ratelimit())
- printk(KERN_ERR "%s: Error %d writing Tx "
- "descriptor to BAP\n", dev->name, err);
- goto busy;
- }
-
- /* Clear the 802.11 header and data length fields - some
- * firmwares (e.g. Lucent/Agere 8.xx) appear to get confused
- * if this isn't done. */
- hermes_clear_words(hw, HERMES_DATA0,
- HERMES_802_3_OFFSET - HERMES_802_11_OFFSET);
- }
-
- err = hw->ops->bap_pwrite(hw, USER_BAP, skb->data, skb->len,
- txfid, HERMES_802_3_OFFSET);
- if (err) {
- printk(KERN_ERR "%s: Error %d writing packet to BAP\n",
- dev->name, err);
- goto busy;
- }
-
- if (tx_control & HERMES_TXCTRL_MIC) {
- size_t offset = HERMES_802_3_OFFSET + skb->len;
- size_t len = MICHAEL_MIC_LEN;
-
- if (offset % 2) {
- offset--;
- len++;
- }
- err = hw->ops->bap_pwrite(hw, USER_BAP, &mic_buf[0], len,
- txfid, offset);
- if (err) {
- printk(KERN_ERR "%s: Error %d writing MIC to BAP\n",
- dev->name, err);
- goto busy;
- }
- }
-
- /* Finally, we actually initiate the send */
- netif_stop_queue(dev);
-
- err = hw->ops->cmd_wait(hw, HERMES_CMD_TX | HERMES_CMD_RECL,
- txfid, NULL);
- if (err) {
- netif_start_queue(dev);
- if (net_ratelimit())
- printk(KERN_ERR "%s: Error %d transmitting packet\n",
- dev->name, err);
- goto busy;
- }
-
- stats->tx_bytes += HERMES_802_3_OFFSET + skb->len;
- goto ok;
-
- drop:
- stats->tx_errors++;
- stats->tx_dropped++;
-
- ok:
- orinoco_unlock(priv, &flags);
- dev_kfree_skb(skb);
- return NETDEV_TX_OK;
-
- busy:
- if (err == -EIO)
- schedule_work(&priv->reset_work);
- orinoco_unlock(priv, &flags);
- return NETDEV_TX_BUSY;
-}
-
-static void __orinoco_ev_alloc(struct net_device *dev, struct hermes *hw)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- u16 fid = hermes_read_regn(hw, ALLOCFID);
-
- if (fid != priv->txfid) {
- if (fid != DUMMY_FID)
- printk(KERN_WARNING "%s: Allocate event on unexpected fid (%04X)\n",
- dev->name, fid);
- return;
- }
-
- hermes_write_regn(hw, ALLOCFID, DUMMY_FID);
-}
-
-static void __orinoco_ev_tx(struct net_device *dev, struct hermes *hw)
-{
- dev->stats.tx_packets++;
-
- netif_wake_queue(dev);
-
- hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID);
-}
-
-static void __orinoco_ev_txexc(struct net_device *dev, struct hermes *hw)
-{
- struct net_device_stats *stats = &dev->stats;
- u16 fid = hermes_read_regn(hw, TXCOMPLFID);
- u16 status;
- struct hermes_txexc_data hdr;
- int err = 0;
-
- if (fid == DUMMY_FID)
- return; /* Nothing's really happened */
-
- /* Read part of the frame header - we need status and addr1 */
- err = hw->ops->bap_pread(hw, IRQ_BAP, &hdr,
- sizeof(struct hermes_txexc_data),
- fid, 0);
-
- hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID);
- stats->tx_errors++;
-
- if (err) {
- printk(KERN_WARNING "%s: Unable to read descriptor on Tx error "
- "(FID=%04X error %d)\n",
- dev->name, fid, err);
- return;
- }
-
- DEBUG(1, "%s: Tx error, err %d (FID=%04X)\n", dev->name,
- err, fid);
-
- /* We produce a TXDROP event only for retry or lifetime
- * exceeded, because that's the only status that really mean
- * that this particular node went away.
- * Other errors means that *we* screwed up. - Jean II */
- status = le16_to_cpu(hdr.desc.status);
- if (status & (HERMES_TXSTAT_RETRYERR | HERMES_TXSTAT_AGEDERR)) {
- union iwreq_data wrqu;
-
- /* Copy 802.11 dest address.
- * We use the 802.11 header because the frame may
- * not be 802.3 or may be mangled...
- * In Ad-Hoc mode, it will be the node address.
- * In managed mode, it will be most likely the AP addr
- * User space will figure out how to convert it to
- * whatever it needs (IP address or else).
- * - Jean II */
- memcpy(wrqu.addr.sa_data, hdr.addr1, ETH_ALEN);
- wrqu.addr.sa_family = ARPHRD_ETHER;
-
- /* Send event to user space */
- wireless_send_event(dev, IWEVTXDROP, &wrqu, NULL);
- }
-
- netif_wake_queue(dev);
-}
-
-void orinoco_tx_timeout(struct net_device *dev, unsigned int txqueue)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- struct net_device_stats *stats = &dev->stats;
- struct hermes *hw = &priv->hw;
-
- printk(KERN_WARNING "%s: Tx timeout! "
- "ALLOCFID=%04x, TXCOMPLFID=%04x, EVSTAT=%04x\n",
- dev->name, hermes_read_regn(hw, ALLOCFID),
- hermes_read_regn(hw, TXCOMPLFID), hermes_read_regn(hw, EVSTAT));
-
- stats->tx_errors++;
-
- schedule_work(&priv->reset_work);
-}
-EXPORT_SYMBOL(orinoco_tx_timeout);
-
-/********************************************************************/
-/* Rx path (data frames) */
-/********************************************************************/
-
-/* Does the frame have a SNAP header indicating it should be
- * de-encapsulated to Ethernet-II? */
-static inline int is_ethersnap(void *_hdr)
-{
- u8 *hdr = _hdr;
-
- /* We de-encapsulate all packets which, a) have SNAP headers
- * (i.e. SSAP=DSAP=0xaa and CTRL=0x3 in the 802.2 LLC header
- * and where b) the OUI of the SNAP header is 00:00:00 or
- * 00:00:f8 - we need both because different APs appear to use
- * different OUIs for some reason */
- return (memcmp(hdr, &encaps_hdr, 5) == 0)
- && ((hdr[5] == 0x00) || (hdr[5] == 0xf8));
-}
-
-static inline void orinoco_spy_gather(struct net_device *dev, u_char *mac,
- int level, int noise)
-{
- struct iw_quality wstats;
- wstats.level = level - 0x95;
- wstats.noise = noise - 0x95;
- wstats.qual = (level > noise) ? (level - noise) : 0;
- wstats.updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM;
- /* Update spy records */
- wireless_spy_update(dev, mac, &wstats);
-}
-
-static void orinoco_stat_gather(struct net_device *dev,
- struct sk_buff *skb,
- struct hermes_rx_descriptor *desc)
-{
- struct orinoco_private *priv = ndev_priv(dev);
-
- /* Using spy support with lots of Rx packets, like in an
- * infrastructure (AP), will really slow down everything, because
- * the MAC address must be compared to each entry of the spy list.
- * If the user really asks for it (set some address in the
- * spy list), we do it, but he will pay the price.
- * Note that to get here, you need both WIRELESS_SPY
- * compiled in AND some addresses in the list !!!
- */
- /* Note : gcc will optimise the whole section away if
- * WIRELESS_SPY is not defined... - Jean II */
- if (SPY_NUMBER(priv)) {
- orinoco_spy_gather(dev, skb_mac_header(skb) + ETH_ALEN,
- desc->signal, desc->silence);
- }
-}
-
-/*
- * orinoco_rx_monitor - handle received monitor frames.
- *
- * Arguments:
- * dev network device
- * rxfid received FID
- * desc rx descriptor of the frame
- *
- * Call context: interrupt
- */
-static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid,
- struct hermes_rx_descriptor *desc)
-{
- u32 hdrlen = 30; /* return full header by default */
- u32 datalen = 0;
- u16 fc;
- int err;
- int len;
- struct sk_buff *skb;
- struct orinoco_private *priv = ndev_priv(dev);
- struct net_device_stats *stats = &dev->stats;
- struct hermes *hw = &priv->hw;
-
- len = le16_to_cpu(desc->data_len);
-
- /* Determine the size of the header and the data */
- fc = le16_to_cpu(desc->frame_ctl);
- switch (fc & IEEE80211_FCTL_FTYPE) {
- case IEEE80211_FTYPE_DATA:
- if ((fc & IEEE80211_FCTL_TODS)
- && (fc & IEEE80211_FCTL_FROMDS))
- hdrlen = 30;
- else
- hdrlen = 24;
- datalen = len;
- break;
- case IEEE80211_FTYPE_MGMT:
- hdrlen = 24;
- datalen = len;
- break;
- case IEEE80211_FTYPE_CTL:
- switch (fc & IEEE80211_FCTL_STYPE) {
- case IEEE80211_STYPE_PSPOLL:
- case IEEE80211_STYPE_RTS:
- case IEEE80211_STYPE_CFEND:
- case IEEE80211_STYPE_CFENDACK:
- hdrlen = 16;
- break;
- case IEEE80211_STYPE_CTS:
- case IEEE80211_STYPE_ACK:
- hdrlen = 10;
- break;
- }
- break;
- default:
- /* Unknown frame type */
- break;
- }
-
- /* sanity check the length */
- if (datalen > IEEE80211_MAX_DATA_LEN + 12) {
- printk(KERN_DEBUG "%s: oversized monitor frame, "
- "data length = %d\n", dev->name, datalen);
- stats->rx_length_errors++;
- goto update_stats;
- }
-
- skb = dev_alloc_skb(hdrlen + datalen);
- if (!skb) {
- printk(KERN_WARNING "%s: Cannot allocate skb for monitor frame\n",
- dev->name);
- goto update_stats;
- }
-
- /* Copy the 802.11 header to the skb */
- skb_put_data(skb, &(desc->frame_ctl), hdrlen);
- skb_reset_mac_header(skb);
-
- /* If any, copy the data from the card to the skb */
- if (datalen > 0) {
- err = hw->ops->bap_pread(hw, IRQ_BAP, skb_put(skb, datalen),
- ALIGN(datalen, 2), rxfid,
- HERMES_802_2_OFFSET);
- if (err) {
- printk(KERN_ERR "%s: error %d reading monitor frame\n",
- dev->name, err);
- goto drop;
- }
- }
-
- skb->dev = dev;
- skb->ip_summed = CHECKSUM_NONE;
- skb->pkt_type = PACKET_OTHERHOST;
- skb->protocol = cpu_to_be16(ETH_P_802_2);
-
- stats->rx_packets++;
- stats->rx_bytes += skb->len;
-
- netif_rx(skb);
- return;
-
- drop:
- dev_kfree_skb_irq(skb);
- update_stats:
- stats->rx_errors++;
- stats->rx_dropped++;
-}
-
-void __orinoco_ev_rx(struct net_device *dev, struct hermes *hw)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- struct net_device_stats *stats = &dev->stats;
- struct iw_statistics *wstats = &priv->wstats;
- struct sk_buff *skb = NULL;
- u16 rxfid, status;
- int length;
- struct hermes_rx_descriptor *desc;
- struct orinoco_rx_data *rx_data;
- int err;
-
- desc = kmalloc(sizeof(*desc), GFP_ATOMIC);
- if (!desc)
- goto update_stats;
-
- rxfid = hermes_read_regn(hw, RXFID);
-
- err = hw->ops->bap_pread(hw, IRQ_BAP, desc, sizeof(*desc),
- rxfid, 0);
- if (err) {
- printk(KERN_ERR "%s: error %d reading Rx descriptor. "
- "Frame dropped.\n", dev->name, err);
- goto update_stats;
- }
-
- status = le16_to_cpu(desc->status);
-
- if (status & HERMES_RXSTAT_BADCRC) {
- DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n",
- dev->name);
- stats->rx_crc_errors++;
- goto update_stats;
- }
-
- /* Handle frames in monitor mode */
- if (priv->iw_mode == NL80211_IFTYPE_MONITOR) {
- orinoco_rx_monitor(dev, rxfid, desc);
- goto out;
- }
-
- if (status & HERMES_RXSTAT_UNDECRYPTABLE) {
- DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n",
- dev->name);
- wstats->discard.code++;
- goto update_stats;
- }
-
- length = le16_to_cpu(desc->data_len);
-
- /* Sanity checks */
- if (length < 3) { /* No for even an 802.2 LLC header */
- /* At least on Symbol firmware with PCF we get quite a
- lot of these legitimately - Poll frames with no
- data. */
- goto out;
- }
- if (length > IEEE80211_MAX_DATA_LEN) {
- printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n",
- dev->name, length);
- stats->rx_length_errors++;
- goto update_stats;
- }
-
- /* Payload size does not include Michael MIC. Increase payload
- * size to read it together with the data. */
- if (status & HERMES_RXSTAT_MIC)
- length += MICHAEL_MIC_LEN;
-
- /* We need space for the packet data itself, plus an ethernet
- header, plus 2 bytes so we can align the IP header on a
- 32bit boundary, plus 1 byte so we can read in odd length
- packets from the card, which has an IO granularity of 16
- bits */
- skb = dev_alloc_skb(length + ETH_HLEN + 2 + 1);
- if (!skb) {
- printk(KERN_WARNING "%s: Can't allocate skb for Rx\n",
- dev->name);
- goto update_stats;
- }
-
- /* We'll prepend the header, so reserve space for it. The worst
- case is no decapsulation, when 802.3 header is prepended and
- nothing is removed. 2 is for aligning the IP header. */
- skb_reserve(skb, ETH_HLEN + 2);
-
- err = hw->ops->bap_pread(hw, IRQ_BAP, skb_put(skb, length),
- ALIGN(length, 2), rxfid,
- HERMES_802_2_OFFSET);
- if (err) {
- printk(KERN_ERR "%s: error %d reading frame. "
- "Frame dropped.\n", dev->name, err);
- goto drop;
- }
-
- /* Add desc and skb to rx queue */
- rx_data = kzalloc(sizeof(*rx_data), GFP_ATOMIC);
- if (!rx_data)
- goto drop;
-
- rx_data->desc = desc;
- rx_data->skb = skb;
- list_add_tail(&rx_data->list, &priv->rx_list);
- tasklet_schedule(&priv->rx_tasklet);
-
- return;
-
-drop:
- dev_kfree_skb_irq(skb);
-update_stats:
- stats->rx_errors++;
- stats->rx_dropped++;
-out:
- kfree(desc);
-}
-EXPORT_SYMBOL(__orinoco_ev_rx);
-
-static void orinoco_rx(struct net_device *dev,
- struct hermes_rx_descriptor *desc,
- struct sk_buff *skb)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- struct net_device_stats *stats = &dev->stats;
- u16 status, fc;
- int length;
- struct ethhdr *hdr;
-
- status = le16_to_cpu(desc->status);
- length = le16_to_cpu(desc->data_len);
- fc = le16_to_cpu(desc->frame_ctl);
-
- /* Calculate and check MIC */
- if (status & HERMES_RXSTAT_MIC) {
- struct orinoco_tkip_key *key;
- int key_id = ((status & HERMES_RXSTAT_MIC_KEY_ID) >>
- HERMES_MIC_KEY_ID_SHIFT);
- u8 mic[MICHAEL_MIC_LEN];
- u8 *rxmic;
- u8 *src = (fc & IEEE80211_FCTL_FROMDS) ?
- desc->addr3 : desc->addr2;
-
- /* Extract Michael MIC from payload */
- rxmic = skb->data + skb->len - MICHAEL_MIC_LEN;
-
- skb_trim(skb, skb->len - MICHAEL_MIC_LEN);
- length -= MICHAEL_MIC_LEN;
-
- key = (struct orinoco_tkip_key *) priv->keys[key_id].key;
-
- if (!key) {
- printk(KERN_WARNING "%s: Received encrypted frame from "
- "%pM using key %i, but key is not installed\n",
- dev->name, src, key_id);
- goto drop;
- }
-
- orinoco_mic(priv->rx_tfm_mic, key->rx_mic, desc->addr1, src,
- 0, /* priority or QoS? */
- skb->data, skb->len, &mic[0]);
-
- if (memcmp(mic, rxmic,
- MICHAEL_MIC_LEN)) {
- union iwreq_data wrqu;
- struct iw_michaelmicfailure wxmic;
-
- printk(KERN_WARNING "%s: "
- "Invalid Michael MIC in data frame from %pM, "
- "using key %i\n",
- dev->name, src, key_id);
-
- /* TODO: update stats */
-
- /* Notify userspace */
- memset(&wxmic, 0, sizeof(wxmic));
- wxmic.flags = key_id & IW_MICFAILURE_KEY_ID;
- wxmic.flags |= (desc->addr1[0] & 1) ?
- IW_MICFAILURE_GROUP : IW_MICFAILURE_PAIRWISE;
- wxmic.src_addr.sa_family = ARPHRD_ETHER;
- memcpy(wxmic.src_addr.sa_data, src, ETH_ALEN);
-
- (void) orinoco_hw_get_tkip_iv(priv, key_id,
- &wxmic.tsc[0]);
-
- memset(&wrqu, 0, sizeof(wrqu));
- wrqu.data.length = sizeof(wxmic);
- wireless_send_event(dev, IWEVMICHAELMICFAILURE, &wrqu,
- (char *) &wxmic);
-
- goto drop;
- }
- }
-
- /* Handle decapsulation
- * In most cases, the firmware tell us about SNAP frames.
- * For some reason, the SNAP frames sent by LinkSys APs
- * are not properly recognised by most firmwares.
- * So, check ourselves */
- if (length >= ENCAPS_OVERHEAD &&
- (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) ||
- ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) ||
- is_ethersnap(skb->data))) {
- /* These indicate a SNAP within 802.2 LLC within
- 802.11 frame which we'll need to de-encapsulate to
- the original EthernetII frame. */
- hdr = skb_push(skb, ETH_HLEN - ENCAPS_OVERHEAD);
- } else {
- /* 802.3 frame - prepend 802.3 header as is */
- hdr = skb_push(skb, ETH_HLEN);
- hdr->h_proto = htons(length);
- }
- memcpy(hdr->h_dest, desc->addr1, ETH_ALEN);
- if (fc & IEEE80211_FCTL_FROMDS)
- memcpy(hdr->h_source, desc->addr3, ETH_ALEN);
- else
- memcpy(hdr->h_source, desc->addr2, ETH_ALEN);
-
- skb->protocol = eth_type_trans(skb, dev);
- skb->ip_summed = CHECKSUM_NONE;
- if (fc & IEEE80211_FCTL_TODS)
- skb->pkt_type = PACKET_OTHERHOST;
-
- /* Process the wireless stats if needed */
- orinoco_stat_gather(dev, skb, desc);
-
- /* Pass the packet to the networking stack */
- netif_rx(skb);
- stats->rx_packets++;
- stats->rx_bytes += length;
-
- return;
-
- drop:
- dev_kfree_skb(skb);
- stats->rx_errors++;
- stats->rx_dropped++;
-}
-
-static void orinoco_rx_isr_tasklet(struct tasklet_struct *t)
-{
- struct orinoco_private *priv = from_tasklet(priv, t, rx_tasklet);
- struct net_device *dev = priv->ndev;
- struct orinoco_rx_data *rx_data, *temp;
- struct hermes_rx_descriptor *desc;
- struct sk_buff *skb;
- unsigned long flags;
-
- /* orinoco_rx requires the driver lock, and we also need to
- * protect priv->rx_list, so just hold the lock over the
- * lot.
- *
- * If orinoco_lock fails, we've unplugged the card. In this
- * case just abort. */
- if (orinoco_lock(priv, &flags) != 0)
- return;
-
- /* extract desc and skb from queue */
- list_for_each_entry_safe(rx_data, temp, &priv->rx_list, list) {
- desc = rx_data->desc;
- skb = rx_data->skb;
- list_del(&rx_data->list);
- kfree(rx_data);
-
- orinoco_rx(dev, desc, skb);
-
- kfree(desc);
- }
-
- orinoco_unlock(priv, &flags);
-}
-
-/********************************************************************/
-/* Rx path (info frames) */
-/********************************************************************/
-
-static void print_linkstatus(struct net_device *dev, u16 status)
-{
- char *s;
-
- if (suppress_linkstatus)
- return;
-
- switch (status) {
- case HERMES_LINKSTATUS_NOT_CONNECTED:
- s = "Not Connected";
- break;
- case HERMES_LINKSTATUS_CONNECTED:
- s = "Connected";
- break;
- case HERMES_LINKSTATUS_DISCONNECTED:
- s = "Disconnected";
- break;
- case HERMES_LINKSTATUS_AP_CHANGE:
- s = "AP Changed";
- break;
- case HERMES_LINKSTATUS_AP_OUT_OF_RANGE:
- s = "AP Out of Range";
- break;
- case HERMES_LINKSTATUS_AP_IN_RANGE:
- s = "AP In Range";
- break;
- case HERMES_LINKSTATUS_ASSOC_FAILED:
- s = "Association Failed";
- break;
- default:
- s = "UNKNOWN";
- }
-
- printk(KERN_DEBUG "%s: New link status: %s (%04x)\n",
- dev->name, s, status);
-}
-
-/* Search scan results for requested BSSID, join it if found */
-static void orinoco_join_ap(struct work_struct *work)
-{
- struct orinoco_private *priv =
- container_of(work, struct orinoco_private, join_work);
- struct net_device *dev = priv->ndev;
- struct hermes *hw = &priv->hw;
- int err;
- unsigned long flags;
- struct join_req {
- u8 bssid[ETH_ALEN];
- __le16 channel;
- } __packed req;
- const int atom_len = offsetof(struct prism2_scan_apinfo, atim);
- struct prism2_scan_apinfo *atom = NULL;
- int offset = 4;
- int found = 0;
- u8 *buf;
- u16 len;
-
- /* Allocate buffer for scan results */
- buf = kmalloc(MAX_SCAN_LEN, GFP_KERNEL);
- if (!buf)
- return;
-
- if (orinoco_lock(priv, &flags) != 0)
- goto fail_lock;
-
- /* Sanity checks in case user changed something in the meantime */
- if (!priv->bssid_fixed)
- goto out;
-
- if (strlen(priv->desired_essid) == 0)
- goto out;
-
- /* Read scan results from the firmware */
- err = hw->ops->read_ltv(hw, USER_BAP,
- HERMES_RID_SCANRESULTSTABLE,
- MAX_SCAN_LEN, &len, buf);
- if (err) {
- printk(KERN_ERR "%s: Cannot read scan results\n",
- dev->name);
- goto out;
- }
-
- len = HERMES_RECLEN_TO_BYTES(len);
-
- /* Go through the scan results looking for the channel of the AP
- * we were requested to join */
- for (; offset + atom_len <= len; offset += atom_len) {
- atom = (struct prism2_scan_apinfo *) (buf + offset);
- if (memcmp(&atom->bssid, priv->desired_bssid, ETH_ALEN) == 0) {
- found = 1;
- break;
- }
- }
-
- if (!found) {
- DEBUG(1, "%s: Requested AP not found in scan results\n",
- dev->name);
- goto out;
- }
-
- memcpy(req.bssid, priv->desired_bssid, ETH_ALEN);
- req.channel = atom->channel; /* both are little-endian */
- err = HERMES_WRITE_RECORD(hw, USER_BAP, HERMES_RID_CNFJOINREQUEST,
- &req);
- if (err)
- printk(KERN_ERR "%s: Error issuing join request\n", dev->name);
-
- out:
- orinoco_unlock(priv, &flags);
-
- fail_lock:
- kfree(buf);
-}
-
-/* Send new BSSID to userspace */
-static void orinoco_send_bssid_wevent(struct orinoco_private *priv)
-{
- struct net_device *dev = priv->ndev;
- struct hermes *hw = &priv->hw;
- union iwreq_data wrqu;
- int err;
-
- err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID,
- ETH_ALEN, NULL, wrqu.ap_addr.sa_data);
- if (err != 0)
- return;
-
- wrqu.ap_addr.sa_family = ARPHRD_ETHER;
-
- /* Send event to user space */
- wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
-}
-
-static void orinoco_send_assocreqie_wevent(struct orinoco_private *priv)
-{
- struct net_device *dev = priv->ndev;
- struct hermes *hw = &priv->hw;
- union iwreq_data wrqu;
- int err;
- u8 buf[88];
- u8 *ie;
-
- if (!priv->has_wpa)
- return;
-
- err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_ASSOC_REQ_INFO,
- sizeof(buf), NULL, &buf);
- if (err != 0)
- return;
-
- ie = orinoco_get_wpa_ie(buf, sizeof(buf));
- if (ie) {
- int rem = sizeof(buf) - (ie - &buf[0]);
- wrqu.data.length = ie[1] + 2;
- if (wrqu.data.length > rem)
- wrqu.data.length = rem;
-
- if (wrqu.data.length)
- /* Send event to user space */
- wireless_send_event(dev, IWEVASSOCREQIE, &wrqu, ie);
- }
-}
-
-static void orinoco_send_assocrespie_wevent(struct orinoco_private *priv)
-{
- struct net_device *dev = priv->ndev;
- struct hermes *hw = &priv->hw;
- union iwreq_data wrqu;
- int err;
- u8 buf[88]; /* TODO: verify max size or IW_GENERIC_IE_MAX */
- u8 *ie;
-
- if (!priv->has_wpa)
- return;
-
- err = hw->ops->read_ltv(hw, USER_BAP,
- HERMES_RID_CURRENT_ASSOC_RESP_INFO,
- sizeof(buf), NULL, &buf);
- if (err != 0)
- return;
-
- ie = orinoco_get_wpa_ie(buf, sizeof(buf));
- if (ie) {
- int rem = sizeof(buf) - (ie - &buf[0]);
- wrqu.data.length = ie[1] + 2;
- if (wrqu.data.length > rem)
- wrqu.data.length = rem;
-
- if (wrqu.data.length)
- /* Send event to user space */
- wireless_send_event(dev, IWEVASSOCRESPIE, &wrqu, ie);
- }
-}
-
-static void orinoco_send_wevents(struct work_struct *work)
-{
- struct orinoco_private *priv =
- container_of(work, struct orinoco_private, wevent_work);
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return;
-
- orinoco_send_assocreqie_wevent(priv);
- orinoco_send_assocrespie_wevent(priv);
- orinoco_send_bssid_wevent(priv);
-
- orinoco_unlock(priv, &flags);
-}
-
-static void qbuf_scan(struct orinoco_private *priv, void *buf,
- int len, int type)
-{
- struct orinoco_scan_data *sd;
- unsigned long flags;
-
- sd = kmalloc(sizeof(*sd), GFP_ATOMIC);
- if (!sd)
- return;
-
- sd->buf = buf;
- sd->len = len;
- sd->type = type;
-
- spin_lock_irqsave(&priv->scan_lock, flags);
- list_add_tail(&sd->list, &priv->scan_list);
- spin_unlock_irqrestore(&priv->scan_lock, flags);
-
- schedule_work(&priv->process_scan);
-}
-
-static void qabort_scan(struct orinoco_private *priv)
-{
- struct orinoco_scan_data *sd;
- unsigned long flags;
-
- sd = kmalloc(sizeof(*sd), GFP_ATOMIC);
- if (!sd)
- return;
-
- sd->len = -1; /* Abort */
-
- spin_lock_irqsave(&priv->scan_lock, flags);
- list_add_tail(&sd->list, &priv->scan_list);
- spin_unlock_irqrestore(&priv->scan_lock, flags);
-
- schedule_work(&priv->process_scan);
-}
-
-static void orinoco_process_scan_results(struct work_struct *work)
-{
- struct orinoco_private *priv =
- container_of(work, struct orinoco_private, process_scan);
- struct orinoco_scan_data *sd, *temp;
- unsigned long flags;
- void *buf;
- int len;
- int type;
-
- spin_lock_irqsave(&priv->scan_lock, flags);
- list_for_each_entry_safe(sd, temp, &priv->scan_list, list) {
-
- buf = sd->buf;
- len = sd->len;
- type = sd->type;
-
- list_del(&sd->list);
- spin_unlock_irqrestore(&priv->scan_lock, flags);
- kfree(sd);
-
- if (len > 0) {
- if (type == HERMES_INQ_CHANNELINFO)
- orinoco_add_extscan_result(priv, buf, len);
- else
- orinoco_add_hostscan_results(priv, buf, len);
-
- kfree(buf);
- } else {
- /* Either abort or complete the scan */
- orinoco_scan_done(priv, (len < 0));
- }
-
- spin_lock_irqsave(&priv->scan_lock, flags);
- }
- spin_unlock_irqrestore(&priv->scan_lock, flags);
-}
-
-void __orinoco_ev_info(struct net_device *dev, struct hermes *hw)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- u16 infofid;
- struct {
- __le16 len;
- __le16 type;
- } __packed info;
- int len, type;
- int err;
-
- /* This is an answer to an INQUIRE command that we did earlier,
- * or an information "event" generated by the card
- * The controller return to us a pseudo frame containing
- * the information in question - Jean II */
- infofid = hermes_read_regn(hw, INFOFID);
-
- /* Read the info frame header - don't try too hard */
- err = hw->ops->bap_pread(hw, IRQ_BAP, &info, sizeof(info),
- infofid, 0);
- if (err) {
- printk(KERN_ERR "%s: error %d reading info frame. "
- "Frame dropped.\n", dev->name, err);
- return;
- }
-
- len = HERMES_RECLEN_TO_BYTES(le16_to_cpu(info.len));
- type = le16_to_cpu(info.type);
-
- switch (type) {
- case HERMES_INQ_TALLIES: {
- struct hermes_tallies_frame tallies;
- struct iw_statistics *wstats = &priv->wstats;
-
- if (len > sizeof(tallies)) {
- printk(KERN_WARNING "%s: Tallies frame too long (%d bytes)\n",
- dev->name, len);
- len = sizeof(tallies);
- }
-
- err = hw->ops->bap_pread(hw, IRQ_BAP, &tallies, len,
- infofid, sizeof(info));
- if (err)
- break;
-
- /* Increment our various counters */
- /* wstats->discard.nwid - no wrong BSSID stuff */
- wstats->discard.code +=
- le16_to_cpu(tallies.RxWEPUndecryptable);
- if (len == sizeof(tallies))
- wstats->discard.code +=
- le16_to_cpu(tallies.RxDiscards_WEPICVError) +
- le16_to_cpu(tallies.RxDiscards_WEPExcluded);
- wstats->discard.misc +=
- le16_to_cpu(tallies.TxDiscardsWrongSA);
- wstats->discard.fragment +=
- le16_to_cpu(tallies.RxMsgInBadMsgFragments);
- wstats->discard.retries +=
- le16_to_cpu(tallies.TxRetryLimitExceeded);
- /* wstats->miss.beacon - no match */
- }
- break;
- case HERMES_INQ_LINKSTATUS: {
- struct hermes_linkstatus linkstatus;
- u16 newstatus;
- int connected;
-
- if (priv->iw_mode == NL80211_IFTYPE_MONITOR)
- break;
-
- if (len != sizeof(linkstatus)) {
- printk(KERN_WARNING "%s: Unexpected size for linkstatus frame (%d bytes)\n",
- dev->name, len);
- break;
- }
-
- err = hw->ops->bap_pread(hw, IRQ_BAP, &linkstatus, len,
- infofid, sizeof(info));
- if (err)
- break;
- newstatus = le16_to_cpu(linkstatus.linkstatus);
-
- /* Symbol firmware uses "out of range" to signal that
- * the hostscan frame can be requested. */
- if (newstatus == HERMES_LINKSTATUS_AP_OUT_OF_RANGE &&
- priv->firmware_type == FIRMWARE_TYPE_SYMBOL &&
- priv->has_hostscan && priv->scan_request) {
- hermes_inquire(hw, HERMES_INQ_HOSTSCAN_SYMBOL);
- break;
- }
-
- connected = (newstatus == HERMES_LINKSTATUS_CONNECTED)
- || (newstatus == HERMES_LINKSTATUS_AP_CHANGE)
- || (newstatus == HERMES_LINKSTATUS_AP_IN_RANGE);
-
- if (connected)
- netif_carrier_on(dev);
- else if (!ignore_disconnect)
- netif_carrier_off(dev);
-
- if (newstatus != priv->last_linkstatus) {
- priv->last_linkstatus = newstatus;
- print_linkstatus(dev, newstatus);
- /* The info frame contains only one word which is the
- * status (see hermes.h). The status is pretty boring
- * in itself, that's why we export the new BSSID...
- * Jean II */
- schedule_work(&priv->wevent_work);
- }
- }
- break;
- case HERMES_INQ_SCAN:
- if (!priv->scan_request && priv->bssid_fixed &&
- priv->firmware_type == FIRMWARE_TYPE_INTERSIL) {
- schedule_work(&priv->join_work);
- break;
- }
- fallthrough;
- case HERMES_INQ_HOSTSCAN:
- case HERMES_INQ_HOSTSCAN_SYMBOL: {
- /* Result of a scanning. Contains information about
- * cells in the vicinity - Jean II */
- unsigned char *buf;
-
- /* Sanity check */
- if (len > 4096) {
- printk(KERN_WARNING "%s: Scan results too large (%d bytes)\n",
- dev->name, len);
- qabort_scan(priv);
- break;
- }
-
- /* Allocate buffer for results */
- buf = kmalloc(len, GFP_ATOMIC);
- if (buf == NULL) {
- /* No memory, so can't printk()... */
- qabort_scan(priv);
- break;
- }
-
- /* Read scan data */
- err = hw->ops->bap_pread(hw, IRQ_BAP, (void *) buf, len,
- infofid, sizeof(info));
- if (err) {
- kfree(buf);
- qabort_scan(priv);
- break;
- }
-
-#ifdef ORINOCO_DEBUG
- {
- int i;
- printk(KERN_DEBUG "Scan result [%02X", buf[0]);
- for (i = 1; i < (len * 2); i++)
- printk(":%02X", buf[i]);
- printk("]\n");
- }
-#endif /* ORINOCO_DEBUG */
-
- qbuf_scan(priv, buf, len, type);
- }
- break;
- case HERMES_INQ_CHANNELINFO:
- {
- struct agere_ext_scan_info *bss;
-
- if (!priv->scan_request) {
- printk(KERN_DEBUG "%s: Got chaninfo without scan, "
- "len=%d\n", dev->name, len);
- break;
- }
-
- /* An empty result indicates that the scan is complete */
- if (len == 0) {
- qbuf_scan(priv, NULL, len, type);
- break;
- }
-
- /* Sanity check */
- else if (len < (offsetof(struct agere_ext_scan_info,
- data) + 2)) {
- /* Drop this result now so we don't have to
- * keep checking later */
- printk(KERN_WARNING
- "%s: Ext scan results too short (%d bytes)\n",
- dev->name, len);
- break;
- }
-
- bss = kmalloc(len, GFP_ATOMIC);
- if (bss == NULL)
- break;
-
- /* Read scan data */
- err = hw->ops->bap_pread(hw, IRQ_BAP, (void *) bss, len,
- infofid, sizeof(info));
- if (err)
- kfree(bss);
- else
- qbuf_scan(priv, bss, len, type);
-
- break;
- }
- case HERMES_INQ_SEC_STAT_AGERE:
- /* Security status (Agere specific) */
- /* Ignore this frame for now */
- if (priv->firmware_type == FIRMWARE_TYPE_AGERE)
- break;
- fallthrough;
- default:
- printk(KERN_DEBUG "%s: Unknown information frame received: "
- "type 0x%04x, length %d\n", dev->name, type, len);
- /* We don't actually do anything about it */
- break;
- }
-}
-EXPORT_SYMBOL(__orinoco_ev_info);
-
-static void __orinoco_ev_infdrop(struct net_device *dev, struct hermes *hw)
-{
- if (net_ratelimit())
- printk(KERN_DEBUG "%s: Information frame lost.\n", dev->name);
-}
-
-/********************************************************************/
-/* Internal hardware control routines */
-/********************************************************************/
-
-static int __orinoco_up(struct orinoco_private *priv)
-{
- struct net_device *dev = priv->ndev;
- struct hermes *hw = &priv->hw;
- int err;
-
- netif_carrier_off(dev); /* just to make sure */
-
- err = __orinoco_commit(priv);
- if (err) {
- printk(KERN_ERR "%s: Error %d configuring card\n",
- dev->name, err);
- return err;
- }
-
- /* Fire things up again */
- hermes_set_irqmask(hw, ORINOCO_INTEN);
- err = hermes_enable_port(hw, 0);
- if (err) {
- printk(KERN_ERR "%s: Error %d enabling MAC port\n",
- dev->name, err);
- return err;
- }
-
- netif_start_queue(dev);
-
- return 0;
-}
-
-static int __orinoco_down(struct orinoco_private *priv)
-{
- struct net_device *dev = priv->ndev;
- struct hermes *hw = &priv->hw;
- int err;
-
- netif_stop_queue(dev);
-
- if (!priv->hw_unavailable) {
- if (!priv->broken_disableport) {
- err = hermes_disable_port(hw, 0);
- if (err) {
- /* Some firmwares (e.g. Intersil 1.3.x) seem
- * to have problems disabling the port, oh
- * well, too bad. */
- printk(KERN_WARNING "%s: Error %d disabling MAC port\n",
- dev->name, err);
- priv->broken_disableport = 1;
- }
- }
- hermes_set_irqmask(hw, 0);
- hermes_write_regn(hw, EVACK, 0xffff);
- }
-
- orinoco_scan_done(priv, true);
-
- /* firmware will have to reassociate */
- netif_carrier_off(dev);
- priv->last_linkstatus = 0xffff;
-
- return 0;
-}
-
-static int orinoco_reinit_firmware(struct orinoco_private *priv)
-{
- struct hermes *hw = &priv->hw;
- int err;
-
- err = hw->ops->init(hw);
- if (priv->do_fw_download && !err) {
- err = orinoco_download(priv);
- if (err)
- priv->do_fw_download = 0;
- }
- if (!err)
- err = orinoco_hw_allocate_fid(priv);
-
- return err;
-}
-
-static int
-__orinoco_set_multicast_list(struct net_device *dev)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- int err = 0;
- int promisc, mc_count;
-
- /* The Hermes doesn't seem to have an allmulti mode, so we go
- * into promiscuous mode and let the upper levels deal. */
- if ((dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI) ||
- (netdev_mc_count(dev) > MAX_MULTICAST(priv))) {
- promisc = 1;
- mc_count = 0;
- } else {
- promisc = 0;
- mc_count = netdev_mc_count(dev);
- }
-
- err = __orinoco_hw_set_multicast_list(priv, dev, mc_count, promisc);
-
- return err;
-}
-
-/* This must be called from user context, without locks held - use
- * schedule_work() */
-void orinoco_reset(struct work_struct *work)
-{
- struct orinoco_private *priv =
- container_of(work, struct orinoco_private, reset_work);
- struct net_device *dev = priv->ndev;
- struct hermes *hw = &priv->hw;
- int err;
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- /* When the hardware becomes available again, whatever
- * detects that is responsible for re-initializing
- * it. So no need for anything further */
- return;
-
- netif_stop_queue(dev);
-
- /* Shut off interrupts. Depending on what state the hardware
- * is in, this might not work, but we'll try anyway */
- hermes_set_irqmask(hw, 0);
- hermes_write_regn(hw, EVACK, 0xffff);
-
- priv->hw_unavailable++;
- priv->last_linkstatus = 0xffff; /* firmware will have to reassociate */
- netif_carrier_off(dev);
-
- orinoco_unlock(priv, &flags);
-
- /* Scanning support: Notify scan cancellation */
- orinoco_scan_done(priv, true);
-
- if (priv->hard_reset) {
- err = (*priv->hard_reset)(priv);
- if (err) {
- printk(KERN_ERR "%s: orinoco_reset: Error %d "
- "performing hard reset\n", dev->name, err);
- goto disable;
- }
- }
-
- err = orinoco_reinit_firmware(priv);
- if (err) {
- printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n",
- dev->name, err);
- goto disable;
- }
-
- /* This has to be called from user context */
- orinoco_lock_irq(priv);
-
- priv->hw_unavailable--;
-
- /* priv->open or priv->hw_unavailable might have changed while
- * we dropped the lock */
- if (priv->open && (!priv->hw_unavailable)) {
- err = __orinoco_up(priv);
- if (err) {
- printk(KERN_ERR "%s: orinoco_reset: Error %d reenabling card\n",
- dev->name, err);
- } else
- netif_trans_update(dev);
- }
-
- orinoco_unlock_irq(priv);
-
- return;
- disable:
- hermes_set_irqmask(hw, 0);
- netif_device_detach(dev);
- printk(KERN_ERR "%s: Device has been disabled!\n", dev->name);
-}
-
-static int __orinoco_commit(struct orinoco_private *priv)
-{
- struct net_device *dev = priv->ndev;
- int err = 0;
-
- /* If we've called commit, we are reconfiguring or bringing the
- * interface up. Maintaining countermeasures across this would
- * be confusing, so note that we've disabled them. The port will
- * be enabled later in orinoco_commit or __orinoco_up. */
- priv->tkip_cm_active = 0;
-
- err = orinoco_hw_program_rids(priv);
-
- /* FIXME: what about netif_tx_lock */
- (void) __orinoco_set_multicast_list(dev);
-
- return err;
-}
-
-/* Ensures configuration changes are applied. May result in a reset.
- * The caller should hold priv->lock
- */
-int orinoco_commit(struct orinoco_private *priv)
-{
- struct net_device *dev = priv->ndev;
- struct hermes *hw = &priv->hw;
- int err;
-
- if (priv->broken_disableport) {
- schedule_work(&priv->reset_work);
- return 0;
- }
-
- err = hermes_disable_port(hw, 0);
- if (err) {
- printk(KERN_WARNING "%s: Unable to disable port "
- "while reconfiguring card\n", dev->name);
- priv->broken_disableport = 1;
- goto out;
- }
-
- err = __orinoco_commit(priv);
- if (err) {
- printk(KERN_WARNING "%s: Unable to reconfigure card\n",
- dev->name);
- goto out;
- }
-
- err = hermes_enable_port(hw, 0);
- if (err) {
- printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n",
- dev->name);
- goto out;
- }
-
- out:
- if (err) {
- printk(KERN_WARNING "%s: Resetting instead...\n", dev->name);
- schedule_work(&priv->reset_work);
- err = 0;
- }
- return err;
-}
-
-/********************************************************************/
-/* Interrupt handler */
-/********************************************************************/
-
-static void __orinoco_ev_tick(struct net_device *dev, struct hermes *hw)
-{
- printk(KERN_DEBUG "%s: TICK\n", dev->name);
-}
-
-static void __orinoco_ev_wterr(struct net_device *dev, struct hermes *hw)
-{
- /* This seems to happen a fair bit under load, but ignoring it
- seems to work fine...*/
- printk(KERN_DEBUG "%s: MAC controller error (WTERR). Ignoring.\n",
- dev->name);
-}
-
-irqreturn_t orinoco_interrupt(int irq, void *dev_id)
-{
- struct orinoco_private *priv = dev_id;
- struct net_device *dev = priv->ndev;
- struct hermes *hw = &priv->hw;
- int count = MAX_IRQLOOPS_PER_IRQ;
- u16 evstat, events;
- /* These are used to detect a runaway interrupt situation.
- *
- * If we get more than MAX_IRQLOOPS_PER_JIFFY iterations in a jiffy,
- * we panic and shut down the hardware
- */
- /* jiffies value the last time we were called */
- static int last_irq_jiffy; /* = 0 */
- static int loops_this_jiffy; /* = 0 */
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0) {
- /* If hw is unavailable - we don't know if the irq was
- * for us or not */
- return IRQ_HANDLED;
- }
-
- evstat = hermes_read_regn(hw, EVSTAT);
- events = evstat & hw->inten;
- if (!events) {
- orinoco_unlock(priv, &flags);
- return IRQ_NONE;
- }
-
- if (jiffies != last_irq_jiffy)
- loops_this_jiffy = 0;
- last_irq_jiffy = jiffies;
-
- while (events && count--) {
- if (++loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY) {
- printk(KERN_WARNING "%s: IRQ handler is looping too "
- "much! Resetting.\n", dev->name);
- /* Disable interrupts for now */
- hermes_set_irqmask(hw, 0);
- schedule_work(&priv->reset_work);
- break;
- }
-
- /* Check the card hasn't been removed */
- if (!hermes_present(hw)) {
- DEBUG(0, "orinoco_interrupt(): card removed\n");
- break;
- }
-
- if (events & HERMES_EV_TICK)
- __orinoco_ev_tick(dev, hw);
- if (events & HERMES_EV_WTERR)
- __orinoco_ev_wterr(dev, hw);
- if (events & HERMES_EV_INFDROP)
- __orinoco_ev_infdrop(dev, hw);
- if (events & HERMES_EV_INFO)
- __orinoco_ev_info(dev, hw);
- if (events & HERMES_EV_RX)
- __orinoco_ev_rx(dev, hw);
- if (events & HERMES_EV_TXEXC)
- __orinoco_ev_txexc(dev, hw);
- if (events & HERMES_EV_TX)
- __orinoco_ev_tx(dev, hw);
- if (events & HERMES_EV_ALLOC)
- __orinoco_ev_alloc(dev, hw);
-
- hermes_write_regn(hw, EVACK, evstat);
-
- evstat = hermes_read_regn(hw, EVSTAT);
- events = evstat & hw->inten;
- }
-
- orinoco_unlock(priv, &flags);
- return IRQ_HANDLED;
-}
-EXPORT_SYMBOL(orinoco_interrupt);
-
-/********************************************************************/
-/* Power management */
-/********************************************************************/
-#if defined(CONFIG_PM_SLEEP) && !defined(CONFIG_HERMES_CACHE_FW_ON_INIT)
-static int orinoco_pm_notifier(struct notifier_block *notifier,
- unsigned long pm_event,
- void *unused)
-{
- struct orinoco_private *priv = container_of(notifier,
- struct orinoco_private,
- pm_notifier);
-
- /* All we need to do is cache the firmware before suspend, and
- * release it when we come out.
- *
- * Only need to do this if we're downloading firmware. */
- if (!priv->do_fw_download)
- return NOTIFY_DONE;
-
- switch (pm_event) {
- case PM_HIBERNATION_PREPARE:
- case PM_SUSPEND_PREPARE:
- orinoco_cache_fw(priv, 0);
- break;
-
- case PM_POST_RESTORE:
- /* Restore from hibernation failed. We need to clean
- * up in exactly the same way, so fall through. */
- case PM_POST_HIBERNATION:
- case PM_POST_SUSPEND:
- orinoco_uncache_fw(priv);
- break;
-
- case PM_RESTORE_PREPARE:
- default:
- break;
- }
-
- return NOTIFY_DONE;
-}
-
-static void orinoco_register_pm_notifier(struct orinoco_private *priv)
-{
- priv->pm_notifier.notifier_call = orinoco_pm_notifier;
- register_pm_notifier(&priv->pm_notifier);
-}
-
-static void orinoco_unregister_pm_notifier(struct orinoco_private *priv)
-{
- unregister_pm_notifier(&priv->pm_notifier);
-}
-#else /* !PM_SLEEP || HERMES_CACHE_FW_ON_INIT */
-#define orinoco_register_pm_notifier(priv) do { } while (0)
-#define orinoco_unregister_pm_notifier(priv) do { } while (0)
-#endif
-
-/********************************************************************/
-/* Initialization */
-/********************************************************************/
-
-int orinoco_init(struct orinoco_private *priv)
-{
- struct device *dev = priv->dev;
- struct wiphy *wiphy = priv_to_wiphy(priv);
- struct hermes *hw = &priv->hw;
- int err = 0;
-
- /* No need to lock, the hw_unavailable flag is already set in
- * alloc_orinocodev() */
- priv->nicbuf_size = IEEE80211_MAX_FRAME_LEN + ETH_HLEN;
-
- /* Initialize the firmware */
- err = hw->ops->init(hw);
- if (err != 0) {
- dev_err(dev, "Failed to initialize firmware (err = %d)\n",
- err);
- goto out;
- }
-
- err = determine_fw_capabilities(priv, wiphy->fw_version,
- sizeof(wiphy->fw_version),
- &wiphy->hw_version);
- if (err != 0) {
- dev_err(dev, "Incompatible firmware, aborting\n");
- goto out;
- }
-
- if (priv->do_fw_download) {
-#ifdef CONFIG_HERMES_CACHE_FW_ON_INIT
- orinoco_cache_fw(priv, 0);
-#endif
-
- err = orinoco_download(priv);
- if (err)
- priv->do_fw_download = 0;
-
- /* Check firmware version again */
- err = determine_fw_capabilities(priv, wiphy->fw_version,
- sizeof(wiphy->fw_version),
- &wiphy->hw_version);
- if (err != 0) {
- dev_err(dev, "Incompatible firmware, aborting\n");
- goto out;
- }
- }
-
- if (priv->has_port3)
- dev_info(dev, "Ad-hoc demo mode supported\n");
- if (priv->has_ibss)
- dev_info(dev, "IEEE standard IBSS ad-hoc mode supported\n");
- if (priv->has_wep)
- dev_info(dev, "WEP supported, %s-bit key\n",
- priv->has_big_wep ? "104" : "40");
- if (priv->has_wpa) {
- dev_info(dev, "WPA-PSK supported\n");
- if (orinoco_mic_init(priv)) {
- dev_err(dev, "Failed to setup MIC crypto algorithm. "
- "Disabling WPA support\n");
- priv->has_wpa = 0;
- }
- }
-
- err = orinoco_hw_read_card_settings(priv, wiphy->perm_addr);
- if (err)
- goto out;
-
- err = orinoco_hw_allocate_fid(priv);
- if (err) {
- dev_err(dev, "Failed to allocate NIC buffer!\n");
- goto out;
- }
-
- /* Set up the default configuration */
- priv->iw_mode = NL80211_IFTYPE_STATION;
- /* By default use IEEE/IBSS ad-hoc mode if we have it */
- priv->prefer_port3 = priv->has_port3 && (!priv->has_ibss);
- set_port_type(priv);
- priv->channel = 0; /* use firmware default */
-
- priv->promiscuous = 0;
- priv->encode_alg = ORINOCO_ALG_NONE;
- priv->tx_key = 0;
- priv->wpa_enabled = 0;
- priv->tkip_cm_active = 0;
- priv->key_mgmt = 0;
- priv->wpa_ie_len = 0;
- priv->wpa_ie = NULL;
-
- if (orinoco_wiphy_register(wiphy)) {
- err = -ENODEV;
- goto out;
- }
-
- /* Make the hardware available, as long as it hasn't been
- * removed elsewhere (e.g. by PCMCIA hot unplug) */
- orinoco_lock_irq(priv);
- priv->hw_unavailable--;
- orinoco_unlock_irq(priv);
-
- dev_dbg(dev, "Ready\n");
-
- out:
- return err;
-}
-EXPORT_SYMBOL(orinoco_init);
-
-static const struct net_device_ops orinoco_netdev_ops = {
- .ndo_open = orinoco_open,
- .ndo_stop = orinoco_stop,
- .ndo_start_xmit = orinoco_xmit,
- .ndo_set_rx_mode = orinoco_set_multicast_list,
- .ndo_change_mtu = orinoco_change_mtu,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_tx_timeout = orinoco_tx_timeout,
-};
-
-/* Allocate private data.
- *
- * This driver has a number of structures associated with it
- * netdev - Net device structure for each network interface
- * wiphy - structure associated with wireless phy
- * wireless_dev (wdev) - structure for each wireless interface
- * hw - structure for hermes chip info
- * card - card specific structure for use by the card driver
- * (airport, orinoco_cs)
- * priv - orinoco private data
- * device - generic linux device structure
- *
- * +---------+ +---------+
- * | wiphy | | netdev |
- * | +-------+ | +-------+
- * | | priv | | | wdev |
- * | | +-----+ +-+-------+
- * | | | hw |
- * | +-+-----+
- * | | card |
- * +-+-------+
- *
- * priv has a link to netdev and device
- * wdev has a link to wiphy
- */
-struct orinoco_private
-*alloc_orinocodev(int sizeof_card,
- struct device *device,
- int (*hard_reset)(struct orinoco_private *),
- int (*stop_fw)(struct orinoco_private *, int))
-{
- struct orinoco_private *priv;
- struct wiphy *wiphy;
-
- /* allocate wiphy
- * NOTE: We only support a single virtual interface
- * but this may change when monitor mode is added
- */
- wiphy = wiphy_new(&orinoco_cfg_ops,
- sizeof(struct orinoco_private) + sizeof_card);
- if (!wiphy)
- return NULL;
-
- priv = wiphy_priv(wiphy);
- priv->dev = device;
-
- if (sizeof_card)
- priv->card = (void *)((unsigned long)priv
- + sizeof(struct orinoco_private));
- else
- priv->card = NULL;
-
- orinoco_wiphy_init(wiphy);
-
-#ifdef WIRELESS_SPY
- priv->wireless_data.spy_data = &priv->spy_data;
-#endif
-
- /* Set up default callbacks */
- priv->hard_reset = hard_reset;
- priv->stop_fw = stop_fw;
-
- spin_lock_init(&priv->lock);
- priv->open = 0;
- priv->hw_unavailable = 1; /* orinoco_init() must clear this
- * before anything else touches the
- * hardware */
- INIT_WORK(&priv->reset_work, orinoco_reset);
- INIT_WORK(&priv->join_work, orinoco_join_ap);
- INIT_WORK(&priv->wevent_work, orinoco_send_wevents);
-
- INIT_LIST_HEAD(&priv->rx_list);
- tasklet_setup(&priv->rx_tasklet, orinoco_rx_isr_tasklet);
-
- spin_lock_init(&priv->scan_lock);
- INIT_LIST_HEAD(&priv->scan_list);
- INIT_WORK(&priv->process_scan, orinoco_process_scan_results);
-
- priv->last_linkstatus = 0xffff;
-
-#if defined(CONFIG_HERMES_CACHE_FW_ON_INIT) || defined(CONFIG_PM_SLEEP)
- priv->cached_pri_fw = NULL;
- priv->cached_fw = NULL;
-#endif
-
- /* Register PM notifiers */
- orinoco_register_pm_notifier(priv);
-
- return priv;
-}
-EXPORT_SYMBOL(alloc_orinocodev);
-
-/* We can only support a single interface. We provide a separate
- * function to set it up to distinguish between hardware
- * initialisation and interface setup.
- *
- * The base_addr and irq parameters are passed on to netdev for use
- * with SIOCGIFMAP.
- */
-int orinoco_if_add(struct orinoco_private *priv,
- unsigned long base_addr,
- unsigned int irq,
- const struct net_device_ops *ops)
-{
- struct wiphy *wiphy = priv_to_wiphy(priv);
- struct wireless_dev *wdev;
- struct net_device *dev;
- int ret;
-
- dev = alloc_etherdev(sizeof(struct wireless_dev));
-
- if (!dev)
- return -ENOMEM;
-
- /* Initialise wireless_dev */
- wdev = netdev_priv(dev);
- wdev->wiphy = wiphy;
- wdev->iftype = NL80211_IFTYPE_STATION;
-
- /* Setup / override net_device fields */
- dev->ieee80211_ptr = wdev;
- dev->watchdog_timeo = HZ; /* 1 second timeout */
- dev->wireless_handlers = &orinoco_handler_def;
-#ifdef WIRELESS_SPY
- dev->wireless_data = &priv->wireless_data;
-#endif
- /* Default to standard ops if not set */
- if (ops)
- dev->netdev_ops = ops;
- else
- dev->netdev_ops = &orinoco_netdev_ops;
-
- /* we use the default eth_mac_addr for setting the MAC addr */
-
- /* Reserve space in skb for the SNAP header */
- dev->needed_headroom = ENCAPS_OVERHEAD;
-
- netif_carrier_off(dev);
-
- eth_hw_addr_set(dev, wiphy->perm_addr);
-
- dev->base_addr = base_addr;
- dev->irq = irq;
-
- dev->min_mtu = ORINOCO_MIN_MTU;
- dev->max_mtu = ORINOCO_MAX_MTU;
-
- SET_NETDEV_DEV(dev, priv->dev);
- ret = register_netdev(dev);
- if (ret)
- goto fail;
-
- priv->ndev = dev;
-
- /* Report what we've done */
- dev_dbg(priv->dev, "Registered interface %s.\n", dev->name);
-
- return 0;
-
- fail:
- free_netdev(dev);
- return ret;
-}
-EXPORT_SYMBOL(orinoco_if_add);
-
-void orinoco_if_del(struct orinoco_private *priv)
-{
- struct net_device *dev = priv->ndev;
-
- unregister_netdev(dev);
- free_netdev(dev);
-}
-EXPORT_SYMBOL(orinoco_if_del);
-
-void free_orinocodev(struct orinoco_private *priv)
-{
- struct wiphy *wiphy = priv_to_wiphy(priv);
- struct orinoco_rx_data *rx_data, *temp;
- struct orinoco_scan_data *sd, *sdtemp;
-
- /* If the tasklet is scheduled when we call tasklet_kill it
- * will run one final time. However the tasklet will only
- * drain priv->rx_list if the hw is still available. */
- tasklet_kill(&priv->rx_tasklet);
-
- /* Explicitly drain priv->rx_list */
- list_for_each_entry_safe(rx_data, temp, &priv->rx_list, list) {
- list_del(&rx_data->list);
-
- dev_kfree_skb(rx_data->skb);
- kfree(rx_data->desc);
- kfree(rx_data);
- }
-
- cancel_work_sync(&priv->process_scan);
- /* Explicitly drain priv->scan_list */
- list_for_each_entry_safe(sd, sdtemp, &priv->scan_list, list) {
- list_del(&sd->list);
-
- if (sd->len > 0)
- kfree(sd->buf);
- kfree(sd);
- }
-
- orinoco_unregister_pm_notifier(priv);
- orinoco_uncache_fw(priv);
-
- priv->wpa_ie_len = 0;
- kfree(priv->wpa_ie);
- orinoco_mic_free(priv);
- wiphy_free(wiphy);
-}
-EXPORT_SYMBOL(free_orinocodev);
-
-int orinoco_up(struct orinoco_private *priv)
-{
- struct net_device *dev = priv->ndev;
- unsigned long flags;
- int err;
-
- priv->hw.ops->lock_irqsave(&priv->lock, &flags);
-
- err = orinoco_reinit_firmware(priv);
- if (err) {
- printk(KERN_ERR "%s: Error %d re-initializing firmware\n",
- dev->name, err);
- goto exit;
- }
-
- netif_device_attach(dev);
- priv->hw_unavailable--;
-
- if (priv->open && !priv->hw_unavailable) {
- err = __orinoco_up(priv);
- if (err)
- printk(KERN_ERR "%s: Error %d restarting card\n",
- dev->name, err);
- }
-
-exit:
- priv->hw.ops->unlock_irqrestore(&priv->lock, &flags);
-
- return 0;
-}
-EXPORT_SYMBOL(orinoco_up);
-
-void orinoco_down(struct orinoco_private *priv)
-{
- struct net_device *dev = priv->ndev;
- unsigned long flags;
- int err;
-
- priv->hw.ops->lock_irqsave(&priv->lock, &flags);
- err = __orinoco_down(priv);
- if (err)
- printk(KERN_WARNING "%s: Error %d downing interface\n",
- dev->name, err);
-
- netif_device_detach(dev);
- priv->hw_unavailable++;
- priv->hw.ops->unlock_irqrestore(&priv->lock, &flags);
-}
-EXPORT_SYMBOL(orinoco_down);
-
-/********************************************************************/
-/* Module initialization */
-/********************************************************************/
-
-/* Can't be declared "const" or the whole __initdata section will
- * become const */
-static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
- " (David Gibson <hermes@gibson.dropbear.id.au>, "
- "Pavel Roskin <proski@gnu.org>, et al)";
-
-static int __init init_orinoco(void)
-{
- printk(KERN_DEBUG "%s\n", version);
- return 0;
-}
-
-static void __exit exit_orinoco(void)
-{
-}
-
-module_init(init_orinoco);
-module_exit(exit_orinoco);
diff --git a/drivers/net/wireless/intersil/orinoco/main.h b/drivers/net/wireless/intersil/orinoco/main.h
deleted file mode 100644
index 5a8fec26136e..000000000000
--- a/drivers/net/wireless/intersil/orinoco/main.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* Exports from main to helper modules
- *
- * See copyright notice in main.c
- */
-#ifndef _ORINOCO_MAIN_H_
-#define _ORINOCO_MAIN_H_
-
-#include <linux/ieee80211.h>
-#include "orinoco.h"
-
-/********************************************************************/
-/* Compile time configuration and compatibility stuff */
-/********************************************************************/
-
-/* We do this this way to avoid ifdefs in the actual code */
-#ifdef WIRELESS_SPY
-#define SPY_NUMBER(priv) (priv->spy_data.spy_number)
-#else
-#define SPY_NUMBER(priv) 0
-#endif /* WIRELESS_SPY */
-
-/********************************************************************/
-
-/* Export module parameter */
-extern int force_monitor;
-
-/* Forward declarations */
-struct net_device;
-struct work_struct;
-
-void set_port_type(struct orinoco_private *priv);
-int orinoco_commit(struct orinoco_private *priv);
-void orinoco_reset(struct work_struct *work);
-
-/* Information element helpers - find a home for these... */
-#define WPA_OUI_TYPE "\x00\x50\xF2\x01"
-#define WPA_SELECTOR_LEN 4
-static inline u8 *orinoco_get_wpa_ie(u8 *data, size_t len)
-{
- u8 *p = data;
- while ((p + 2 + WPA_SELECTOR_LEN) < (data + len)) {
- if ((p[0] == WLAN_EID_VENDOR_SPECIFIC) &&
- (memcmp(&p[2], WPA_OUI_TYPE, WPA_SELECTOR_LEN) == 0))
- return p;
- p += p[1] + 2;
- }
- return NULL;
-}
-
-#endif /* _ORINOCO_MAIN_H_ */
diff --git a/drivers/net/wireless/intersil/orinoco/mic.c b/drivers/net/wireless/intersil/orinoco/mic.c
deleted file mode 100644
index a324bc4b7938..000000000000
--- a/drivers/net/wireless/intersil/orinoco/mic.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/* Orinoco MIC helpers
- *
- * See copyright notice in main.c
- */
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/if_ether.h>
-#include <linux/scatterlist.h>
-#include <crypto/hash.h>
-
-#include "orinoco.h"
-#include "mic.h"
-
-/********************************************************************/
-/* Michael MIC crypto setup */
-/********************************************************************/
-int orinoco_mic_init(struct orinoco_private *priv)
-{
- priv->tx_tfm_mic = crypto_alloc_shash("michael_mic", 0, 0);
- if (IS_ERR(priv->tx_tfm_mic)) {
- printk(KERN_DEBUG "%s: could not allocate "
- "crypto API michael_mic\n", __func__);
- priv->tx_tfm_mic = NULL;
- return -ENOMEM;
- }
-
- priv->rx_tfm_mic = crypto_alloc_shash("michael_mic", 0, 0);
- if (IS_ERR(priv->rx_tfm_mic)) {
- printk(KERN_DEBUG "%s: could not allocate "
- "crypto API michael_mic\n", __func__);
- priv->rx_tfm_mic = NULL;
- return -ENOMEM;
- }
-
- return 0;
-}
-
-void orinoco_mic_free(struct orinoco_private *priv)
-{
- if (priv->tx_tfm_mic)
- crypto_free_shash(priv->tx_tfm_mic);
- if (priv->rx_tfm_mic)
- crypto_free_shash(priv->rx_tfm_mic);
-}
-
-int orinoco_mic(struct crypto_shash *tfm_michael, u8 *key,
- u8 *da, u8 *sa, u8 priority,
- u8 *data, size_t data_len, u8 *mic)
-{
- SHASH_DESC_ON_STACK(desc, tfm_michael);
- u8 hdr[ETH_HLEN + 2]; /* size of header + padding */
- int err;
-
- if (tfm_michael == NULL) {
- printk(KERN_WARNING "%s: tfm_michael == NULL\n", __func__);
- return -1;
- }
-
- /* Copy header into buffer. We need the padding on the end zeroed */
- memcpy(&hdr[0], da, ETH_ALEN);
- memcpy(&hdr[ETH_ALEN], sa, ETH_ALEN);
- hdr[ETH_ALEN * 2] = priority;
- hdr[ETH_ALEN * 2 + 1] = 0;
- hdr[ETH_ALEN * 2 + 2] = 0;
- hdr[ETH_ALEN * 2 + 3] = 0;
-
- desc->tfm = tfm_michael;
-
- err = crypto_shash_setkey(tfm_michael, key, MIC_KEYLEN);
- if (err)
- return err;
-
- err = crypto_shash_init(desc);
- if (err)
- return err;
-
- err = crypto_shash_update(desc, hdr, sizeof(hdr));
- if (err)
- return err;
-
- err = crypto_shash_update(desc, data, data_len);
- if (err)
- return err;
-
- err = crypto_shash_final(desc, mic);
- shash_desc_zero(desc);
-
- return err;
-}
diff --git a/drivers/net/wireless/intersil/orinoco/mic.h b/drivers/net/wireless/intersil/orinoco/mic.h
deleted file mode 100644
index e8724e889219..000000000000
--- a/drivers/net/wireless/intersil/orinoco/mic.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* Orinoco MIC helpers
- *
- * See copyright notice in main.c
- */
-#ifndef _ORINOCO_MIC_H_
-#define _ORINOCO_MIC_H_
-
-#include <linux/types.h>
-#include <crypto/hash.h>
-
-#define MICHAEL_MIC_LEN 8
-
-/* Forward declarations */
-struct orinoco_private;
-struct crypto_ahash;
-
-int orinoco_mic_init(struct orinoco_private *priv);
-void orinoco_mic_free(struct orinoco_private *priv);
-int orinoco_mic(struct crypto_shash *tfm_michael, u8 *key,
- u8 *da, u8 *sa, u8 priority,
- u8 *data, size_t data_len, u8 *mic);
-
-#endif /* ORINOCO_MIC_H */
diff --git a/drivers/net/wireless/intersil/orinoco/orinoco.h b/drivers/net/wireless/intersil/orinoco/orinoco.h
deleted file mode 100644
index cdd026af100b..000000000000
--- a/drivers/net/wireless/intersil/orinoco/orinoco.h
+++ /dev/null
@@ -1,251 +0,0 @@
-/* orinoco.h
- *
- * Common definitions to all pieces of the various orinoco
- * drivers
- */
-
-#ifndef _ORINOCO_H
-#define _ORINOCO_H
-
-#define DRIVER_VERSION "0.15"
-
-#include <linux/interrupt.h>
-#include <linux/suspend.h>
-#include <linux/netdevice.h>
-#include <linux/wireless.h>
-#include <net/iw_handler.h>
-#include <net/cfg80211.h>
-
-#include "hermes.h"
-
-/* To enable debug messages */
-/*#define ORINOCO_DEBUG 3*/
-
-#define WIRELESS_SPY /* enable iwspy support */
-
-#define MAX_SCAN_LEN 4096
-
-#define ORINOCO_SEQ_LEN 8
-#define ORINOCO_MAX_KEY_SIZE 14
-#define ORINOCO_MAX_KEYS 4
-
-struct orinoco_key {
- __le16 len; /* always stored as little-endian */
- char data[ORINOCO_MAX_KEY_SIZE];
-} __packed;
-
-#define TKIP_KEYLEN 16
-#define MIC_KEYLEN 8
-
-struct orinoco_tkip_key {
- u8 tkip[TKIP_KEYLEN];
- u8 tx_mic[MIC_KEYLEN];
- u8 rx_mic[MIC_KEYLEN];
-};
-
-enum orinoco_alg {
- ORINOCO_ALG_NONE,
- ORINOCO_ALG_WEP,
- ORINOCO_ALG_TKIP
-};
-
-enum fwtype {
- FIRMWARE_TYPE_AGERE,
- FIRMWARE_TYPE_INTERSIL,
- FIRMWARE_TYPE_SYMBOL
-};
-
-struct firmware;
-
-struct orinoco_private {
- void *card; /* Pointer to card dependent structure */
- struct device *dev;
- int (*hard_reset)(struct orinoco_private *);
- int (*stop_fw)(struct orinoco_private *, int);
-
- struct ieee80211_supported_band band;
- struct ieee80211_channel channels[14];
- u32 cipher_suites[3];
-
- /* Synchronisation stuff */
- spinlock_t lock;
- int hw_unavailable;
- struct work_struct reset_work;
-
- /* Interrupt tasklets */
- struct tasklet_struct rx_tasklet;
- struct list_head rx_list;
-
- /* driver state */
- int open;
- u16 last_linkstatus;
- struct work_struct join_work;
- struct work_struct wevent_work;
-
- /* Net device stuff */
- struct net_device *ndev;
- struct iw_statistics wstats;
-
- /* Hardware control variables */
- struct hermes hw;
- u16 txfid;
-
- /* Capabilities of the hardware/firmware */
- enum fwtype firmware_type;
- int ibss_port;
- int nicbuf_size;
- u16 channel_mask;
-
- /* Boolean capabilities */
- unsigned int has_ibss:1;
- unsigned int has_port3:1;
- unsigned int has_wep:1;
- unsigned int has_big_wep:1;
- unsigned int has_mwo:1;
- unsigned int has_pm:1;
- unsigned int has_preamble:1;
- unsigned int has_sensitivity:1;
- unsigned int has_hostscan:1;
- unsigned int has_alt_txcntl:1;
- unsigned int has_ext_scan:1;
- unsigned int has_wpa:1;
- unsigned int do_fw_download:1;
- unsigned int broken_disableport:1;
- unsigned int broken_monitor:1;
- unsigned int prefer_port3:1;
-
- /* Configuration paramaters */
- enum nl80211_iftype iw_mode;
- enum orinoco_alg encode_alg;
- u16 wep_restrict, tx_key;
- struct key_params keys[ORINOCO_MAX_KEYS];
-
- int bitratemode;
- char nick[IW_ESSID_MAX_SIZE + 1];
- char desired_essid[IW_ESSID_MAX_SIZE + 1];
- char desired_bssid[ETH_ALEN];
- int bssid_fixed;
- u16 frag_thresh, mwo_robust;
- u16 channel;
- u16 ap_density, rts_thresh;
- u16 pm_on, pm_mcast, pm_period, pm_timeout;
- u16 preamble;
- u16 short_retry_limit, long_retry_limit;
- u16 retry_lifetime;
-#ifdef WIRELESS_SPY
- struct iw_spy_data spy_data; /* iwspy support */
- struct iw_public_data wireless_data;
-#endif
-
- /* Configuration dependent variables */
- int port_type, createibss;
- int promiscuous, mc_count;
-
- /* Scanning support */
- struct cfg80211_scan_request *scan_request;
- struct work_struct process_scan;
- struct list_head scan_list;
- spinlock_t scan_lock; /* protects the scan list */
-
- /* WPA support */
- u8 *wpa_ie;
- int wpa_ie_len;
-
- struct crypto_shash *rx_tfm_mic;
- struct crypto_shash *tx_tfm_mic;
-
- unsigned int wpa_enabled:1;
- unsigned int tkip_cm_active:1;
- unsigned int key_mgmt:3;
-
-#if defined(CONFIG_HERMES_CACHE_FW_ON_INIT) || defined(CONFIG_PM_SLEEP)
- /* Cached in memory firmware to use during ->resume. */
- const struct firmware *cached_pri_fw;
- const struct firmware *cached_fw;
-#endif
-
- struct notifier_block pm_notifier;
-};
-
-#ifdef ORINOCO_DEBUG
-extern int orinoco_debug;
-#define DEBUG(n, args...) do { \
- if (orinoco_debug > (n)) \
- printk(KERN_DEBUG args); \
-} while (0)
-#else
-#define DEBUG(n, args...) do { } while (0)
-#endif /* ORINOCO_DEBUG */
-
-/********************************************************************/
-/* Exported prototypes */
-/********************************************************************/
-
-struct orinoco_private *alloc_orinocodev(int sizeof_card, struct device *device,
- int (*hard_reset)(struct orinoco_private *),
- int (*stop_fw)(struct orinoco_private *, int));
-void free_orinocodev(struct orinoco_private *priv);
-int orinoco_init(struct orinoco_private *priv);
-int orinoco_if_add(struct orinoco_private *priv, unsigned long base_addr,
- unsigned int irq, const struct net_device_ops *ops);
-void orinoco_if_del(struct orinoco_private *priv);
-int orinoco_up(struct orinoco_private *priv);
-void orinoco_down(struct orinoco_private *priv);
-irqreturn_t orinoco_interrupt(int irq, void *dev_id);
-
-void __orinoco_ev_info(struct net_device *dev, struct hermes *hw);
-void __orinoco_ev_rx(struct net_device *dev, struct hermes *hw);
-
-int orinoco_process_xmit_skb(struct sk_buff *skb,
- struct net_device *dev,
- struct orinoco_private *priv,
- int *tx_control,
- u8 *mic);
-
-/* Common ndo functions exported for reuse by orinoco_usb */
-int orinoco_open(struct net_device *dev);
-int orinoco_stop(struct net_device *dev);
-void orinoco_set_multicast_list(struct net_device *dev);
-int orinoco_change_mtu(struct net_device *dev, int new_mtu);
-void orinoco_tx_timeout(struct net_device *dev, unsigned int txqueue);
-
-/********************************************************************/
-/* Locking and synchronization functions */
-/********************************************************************/
-
-static inline int orinoco_lock(struct orinoco_private *priv,
- unsigned long *flags)
-{
- priv->hw.ops->lock_irqsave(&priv->lock, flags);
- if (priv->hw_unavailable) {
- DEBUG(1, "orinoco_lock() called with hw_unavailable (dev=%p)\n",
- priv->ndev);
- priv->hw.ops->unlock_irqrestore(&priv->lock, flags);
- return -EBUSY;
- }
- return 0;
-}
-
-static inline void orinoco_unlock(struct orinoco_private *priv,
- unsigned long *flags)
-{
- priv->hw.ops->unlock_irqrestore(&priv->lock, flags);
-}
-
-static inline void orinoco_lock_irq(struct orinoco_private *priv)
-{
- priv->hw.ops->lock_irq(&priv->lock);
-}
-
-static inline void orinoco_unlock_irq(struct orinoco_private *priv)
-{
- priv->hw.ops->unlock_irq(&priv->lock);
-}
-
-/*** Navigate from net_device to orinoco_private ***/
-static inline struct orinoco_private *ndev_priv(struct net_device *dev)
-{
- struct wireless_dev *wdev = netdev_priv(dev);
- return wdev_priv(wdev);
-}
-#endif /* _ORINOCO_H */
diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_cs.c b/drivers/net/wireless/intersil/orinoco/orinoco_cs.c
deleted file mode 100644
index 03bfd2482656..000000000000
--- a/drivers/net/wireless/intersil/orinoco/orinoco_cs.c
+++ /dev/null
@@ -1,350 +0,0 @@
-/* orinoco_cs.c (formerly known as dldwd_cs.c)
- *
- * A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
- * as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
- * EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and others).
- * It should also be usable on various Prism II based cards such as the
- * Linksys, D-Link and Farallon Skyline. It should also work on Symbol
- * cards such as the 3Com AirConnect and Ericsson WLAN.
- *
- * Copyright notice & release notes in file main.c
- */
-
-#define DRIVER_NAME "orinoco_cs"
-#define PFX DRIVER_NAME ": "
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <pcmcia/cistpl.h>
-#include <pcmcia/cisreg.h>
-#include <pcmcia/ds.h>
-
-#include "orinoco.h"
-
-/********************************************************************/
-/* Module stuff */
-/********************************************************************/
-
-MODULE_AUTHOR("David Gibson <hermes@gibson.dropbear.id.au>");
-MODULE_DESCRIPTION("Driver for PCMCIA Lucent Orinoco,"
- " Prism II based and similar wireless cards");
-MODULE_LICENSE("Dual MPL/GPL");
-
-/* Module parameters */
-
-/* Some D-Link cards have buggy CIS. They do work at 5v properly, but
- * don't have any CIS entry for it. This workaround it... */
-static int ignore_cis_vcc; /* = 0 */
-module_param(ignore_cis_vcc, int, 0);
-MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket");
-
-/********************************************************************/
-/* Data structures */
-/********************************************************************/
-
-/* PCMCIA specific device information (goes in the card field of
- * struct orinoco_private */
-struct orinoco_pccard {
- struct pcmcia_device *p_dev;
-
- /* Used to handle hard reset */
- /* yuck, we need this hack to work around the insanity of the
- * PCMCIA layer */
- unsigned long hard_reset_in_progress;
-};
-
-
-/********************************************************************/
-/* Function prototypes */
-/********************************************************************/
-
-static int orinoco_cs_config(struct pcmcia_device *link);
-static void orinoco_cs_release(struct pcmcia_device *link);
-static void orinoco_cs_detach(struct pcmcia_device *p_dev);
-
-/********************************************************************/
-/* Device methods */
-/********************************************************************/
-
-static int
-orinoco_cs_hard_reset(struct orinoco_private *priv)
-{
- struct orinoco_pccard *card = priv->card;
- struct pcmcia_device *link = card->p_dev;
- int err;
-
- /* We need atomic ops here, because we're not holding the lock */
- set_bit(0, &card->hard_reset_in_progress);
-
- err = pcmcia_reset_card(link->socket);
- if (err)
- return err;
-
- msleep(100);
- clear_bit(0, &card->hard_reset_in_progress);
-
- return 0;
-}
-
-/********************************************************************/
-/* PCMCIA stuff */
-/********************************************************************/
-
-static int
-orinoco_cs_probe(struct pcmcia_device *link)
-{
- struct orinoco_private *priv;
- struct orinoco_pccard *card;
- int ret;
-
- priv = alloc_orinocodev(sizeof(*card), &link->dev,
- orinoco_cs_hard_reset, NULL);
- if (!priv)
- return -ENOMEM;
- card = priv->card;
-
- /* Link both structures together */
- card->p_dev = link;
- link->priv = priv;
-
- ret = orinoco_cs_config(link);
- if (ret)
- goto err_free_orinocodev;
-
- return 0;
-
-err_free_orinocodev:
- free_orinocodev(priv);
- return ret;
-}
-
-static void orinoco_cs_detach(struct pcmcia_device *link)
-{
- struct orinoco_private *priv = link->priv;
-
- orinoco_if_del(priv);
-
- orinoco_cs_release(link);
-
- wiphy_unregister(priv_to_wiphy(priv));
- free_orinocodev(priv);
-} /* orinoco_cs_detach */
-
-static int orinoco_cs_config_check(struct pcmcia_device *p_dev, void *priv_data)
-{
- if (p_dev->config_index == 0)
- return -EINVAL;
-
- return pcmcia_request_io(p_dev);
-};
-
-static int
-orinoco_cs_config(struct pcmcia_device *link)
-{
- struct orinoco_private *priv = link->priv;
- struct hermes *hw = &priv->hw;
- int ret;
- void __iomem *mem;
-
- link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC |
- CONF_AUTO_SET_IO | CONF_ENABLE_IRQ;
- if (ignore_cis_vcc)
- link->config_flags &= ~CONF_AUTO_CHECK_VCC;
- ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL);
- if (ret) {
- if (!ignore_cis_vcc)
- printk(KERN_ERR PFX "GetNextTuple(): No matching "
- "CIS configuration. Maybe you need the "
- "ignore_cis_vcc=1 parameter.\n");
- goto failed;
- }
-
- mem = ioport_map(link->resource[0]->start,
- resource_size(link->resource[0]));
- if (!mem)
- goto failed;
-
- /* We initialize the hermes structure before completing PCMCIA
- * configuration just in case the interrupt handler gets
- * called. */
- hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
-
- ret = pcmcia_request_irq(link, orinoco_interrupt);
- if (ret)
- goto failed;
-
- ret = pcmcia_enable_device(link);
- if (ret)
- goto failed;
-
- /* Initialise the main driver */
- if (orinoco_init(priv) != 0) {
- printk(KERN_ERR PFX "orinoco_init() failed\n");
- goto failed;
- }
-
- /* Register an interface with the stack */
- if (orinoco_if_add(priv, link->resource[0]->start,
- link->irq, NULL) != 0) {
- printk(KERN_ERR PFX "orinoco_if_add() failed\n");
- goto failed;
- }
-
- return 0;
-
- failed:
- orinoco_cs_release(link);
- return -ENODEV;
-} /* orinoco_cs_config */
-
-static void
-orinoco_cs_release(struct pcmcia_device *link)
-{
- struct orinoco_private *priv = link->priv;
- unsigned long flags;
-
- /* We're committed to taking the device away now, so mark the
- * hardware as unavailable */
- priv->hw.ops->lock_irqsave(&priv->lock, &flags);
- priv->hw_unavailable++;
- priv->hw.ops->unlock_irqrestore(&priv->lock, &flags);
-
- pcmcia_disable_device(link);
- if (priv->hw.iobase)
- ioport_unmap(priv->hw.iobase);
-} /* orinoco_cs_release */
-
-static int orinoco_cs_suspend(struct pcmcia_device *link)
-{
- struct orinoco_private *priv = link->priv;
- struct orinoco_pccard *card = priv->card;
-
- /* This is probably racy, but I can't think of
- a better way, short of rewriting the PCMCIA
- layer to not suck :-( */
- if (!test_bit(0, &card->hard_reset_in_progress))
- orinoco_down(priv);
-
- return 0;
-}
-
-static int orinoco_cs_resume(struct pcmcia_device *link)
-{
- struct orinoco_private *priv = link->priv;
- struct orinoco_pccard *card = priv->card;
- int err = 0;
-
- if (!test_bit(0, &card->hard_reset_in_progress))
- err = orinoco_up(priv);
-
- return err;
-}
-
-
-/********************************************************************/
-/* Module initialization */
-/********************************************************************/
-
-static const struct pcmcia_device_id orinoco_cs_ids[] = {
- PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */
- PCMCIA_DEVICE_MANF_CARD(0x016b, 0x0001), /* Ericsson WLAN Card C11 */
- PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), /* Nortel Networks eMobility 802.11 Wireless Adapter */
- PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */
- PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */
- PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0003), /* ARtem Onair Comcard 11 */
- PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */
- PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */
- PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */
- PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x3021), /* SpeedStream Wireless Adapter */
- PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */
- PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3),
- PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f),
- PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e),
- PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842),
- PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169),
- PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb),
- PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90),
- PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916),
- PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3),
- PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c),
- PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077),
- PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92),
- PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a),
- PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410),
- PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3),
- PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/IEEE", 0x24358cd4, 0xc562e72a),
- PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767),
- PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed),
- PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9),
- PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26),
- PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b),
- PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e),
- PCMCIA_DEVICE_MANF_CARD_PROD_ID3(0x0156, 0x0002, "Version 01.01", 0xd27deb1a), /* Lucent Orinoco */
-#ifdef CONFIG_HERMES_PRISM
- /* Only entries that certainly identify Prism chipset */
- PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */
- PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), /* Sohoware NCP110, Philips 802.11b */
- PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), /* AnyPoint(TM) Wireless II PC Card */
- PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), /* PROXIM RangeLAN-DS/LAN PC CARD */
- PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), /* Compaq WL100 11 Mbps Wireless Adapter */
- PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), /* Intermec MobileLAN 11Mbps 802.11b WLAN Card */
- PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */
- PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */
- PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */
- PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), /* Compaq HNW-100 11 Mbps Wireless Adapter */
- PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */
- PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */
- PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */
- PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), /* CONTEC FLEXSCAN/FX-DDS110-PCC */
- PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), /* Conceptronic CON11Cpro, EMTAC A2424i */
- PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), /* Safeway 802.11b, ZCOMAX AirRunner/XI-300 */
- PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), /* D-Link DCF660, Sandisk Connect SDWCFB-000 */
- PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0),
- PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5),
- PCMCIA_DEVICE_PROD_ID12("Addtron", "AWP-100 Wireless PCMCIA", 0xe6ec52ce, 0x08649af2),
- PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 0x2decece3, 0x82067c18),
- PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3),
- PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", 0x54f7c49c, 0x15a75e5b),
- PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCC-11", 0x5261440f, 0xa6405584),
- PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9),
- PCMCIA_DEVICE_PROD_ID12("corega_K.K.", "Wireless_LAN_PCCB-11", 0x29e33311, 0xee7a27ae),
- PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146),
- PCMCIA_DEVICE_PROD_ID12("D", "Link DRC-650 11Mbps WLAN Card", 0x71b18589, 0xf144e3ac),
- PCMCIA_DEVICE_PROD_ID12("D", "Link DWL-650 11Mbps WLAN Card", 0x71b18589, 0xb6f1b0ab),
- PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9),
- PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18),
- PCMCIA_DEVICE_PROD_ID12("INTERSIL", "I-GATE 11M PC Card / PC Card plus", 0x74c5e40d, 0x8304ff77),
- PCMCIA_DEVICE_PROD_ID12("Intersil", "PRISM 2_5 PCMCIA ADAPTER", 0x4b801a17, 0x6345a0bf),
- PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", 0x0733cc81, 0x0c52f395),
- PCMCIA_DEVICE_PROD_ID12("Microsoft", "Wireless Notebook Adapter MN-520", 0x5961bf85, 0x6eec8c01),
- PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401RA Wireless PC", "Card", 0x0306467f, 0x9762e8f1),
- PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", 0xa37434e9, 0x9762e8f1),
- PCMCIA_DEVICE_PROD_ID12("OEM", "PRISM2 IEEE 802.11 PC-Card", 0xfea54c90, 0x48f2bdd6),
- PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-CF110", 0x209f40ab, 0xd9715264),
- PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-NS110", 0x209f40ab, 0x46263178),
- PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2532W-B EliteConnect Wireless Adapter", 0xc4f8b18b, 0x196bd757),
- PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a),
- PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High", "Rate wireless Networking", 0x273fe3db, 0x32a1eaee),
- PCMCIA_DEVICE_PROD_ID3("HFA3863", 0x355cb092),
- PCMCIA_DEVICE_PROD_ID3("ISL37100P", 0x630d52b2),
- PCMCIA_DEVICE_PROD_ID3("ISL37101P-10", 0xdd97a26b),
- PCMCIA_DEVICE_PROD_ID3("ISL37300P", 0xc9049a39),
-
- /* This may be Agere or Intersil Firmware */
- PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002),
-#endif
- PCMCIA_DEVICE_NULL,
-};
-MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids);
-
-static struct pcmcia_driver orinoco_driver = {
- .owner = THIS_MODULE,
- .name = DRIVER_NAME,
- .probe = orinoco_cs_probe,
- .remove = orinoco_cs_detach,
- .id_table = orinoco_cs_ids,
- .suspend = orinoco_cs_suspend,
- .resume = orinoco_cs_resume,
-};
-module_pcmcia_driver(orinoco_driver);
diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_nortel.c b/drivers/net/wireless/intersil/orinoco/orinoco_nortel.c
deleted file mode 100644
index 18bd0d9876c2..000000000000
--- a/drivers/net/wireless/intersil/orinoco/orinoco_nortel.c
+++ /dev/null
@@ -1,314 +0,0 @@
-/* orinoco_nortel.c
- *
- * Driver for Prism II devices which would usually be driven by orinoco_cs,
- * but are connected to the PCI bus by a PCI-to-PCMCIA adapter used in
- * Nortel emobility, Symbol LA-4113 and Symbol LA-4123.
- *
- * Copyright (C) 2002 Tobias Hoffmann
- * (C) 2003 Christoph Jungegger <disdos@traum404.de>
- *
- * Some of this code is borrowed from orinoco_plx.c
- * Copyright (C) 2001 Daniel Barlow
- * Some of this code is borrowed from orinoco_pci.c
- * Copyright (C) 2001 Jean Tourrilhes
- * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing
- * has been copied from it. linux-wlan-ng-0.1.10 is originally :
- * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#define DRIVER_NAME "orinoco_nortel"
-#define PFX DRIVER_NAME ": "
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <pcmcia/cisreg.h>
-
-#include "orinoco.h"
-#include "orinoco_pci.h"
-
-#define COR_OFFSET (0xe0) /* COR attribute offset of Prism2 PC card */
-#define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */
-
-
-/*
- * Do a soft reset of the card using the Configuration Option Register
- * We need this to get going...
- * This is the part of the code that is strongly inspired from wlan-ng
- *
- * Note bis : Don't try to access HERMES_CMD during the reset phase.
- * It just won't work !
- */
-static int orinoco_nortel_cor_reset(struct orinoco_private *priv)
-{
- struct orinoco_pci_card *card = priv->card;
-
- /* Assert the reset until the card notices */
- iowrite16(8, card->bridge_io + 2);
- ioread16(card->attr_io + COR_OFFSET);
- iowrite16(0x80, card->attr_io + COR_OFFSET);
- mdelay(1);
-
- /* Give time for the card to recover from this hard effort */
- iowrite16(0, card->attr_io + COR_OFFSET);
- iowrite16(0, card->attr_io + COR_OFFSET);
- mdelay(1);
-
- /* Set COR as usual */
- iowrite16(COR_VALUE, card->attr_io + COR_OFFSET);
- iowrite16(COR_VALUE, card->attr_io + COR_OFFSET);
- mdelay(1);
-
- iowrite16(0x228, card->bridge_io + 2);
-
- return 0;
-}
-
-static int orinoco_nortel_hw_init(struct orinoco_pci_card *card)
-{
- int i;
- u32 reg;
-
- /* Setup bridge */
- if (ioread16(card->bridge_io) & 1) {
- printk(KERN_ERR PFX "brg1 answer1 wrong\n");
- return -EBUSY;
- }
- iowrite16(0x118, card->bridge_io + 2);
- iowrite16(0x108, card->bridge_io + 2);
- mdelay(30);
- iowrite16(0x8, card->bridge_io + 2);
- for (i = 0; i < 30; i++) {
- mdelay(30);
- if (ioread16(card->bridge_io) & 0x10)
- break;
- }
- if (i == 30) {
- printk(KERN_ERR PFX "brg1 timed out\n");
- return -EBUSY;
- }
- if (ioread16(card->attr_io + COR_OFFSET) & 1) {
- printk(KERN_ERR PFX "brg2 answer1 wrong\n");
- return -EBUSY;
- }
- if (ioread16(card->attr_io + COR_OFFSET + 2) & 1) {
- printk(KERN_ERR PFX "brg2 answer2 wrong\n");
- return -EBUSY;
- }
- if (ioread16(card->attr_io + COR_OFFSET + 4) & 1) {
- printk(KERN_ERR PFX "brg2 answer3 wrong\n");
- return -EBUSY;
- }
-
- /* Set the PCMCIA COR register */
- iowrite16(COR_VALUE, card->attr_io + COR_OFFSET);
- mdelay(1);
- reg = ioread16(card->attr_io + COR_OFFSET);
- if (reg != COR_VALUE) {
- printk(KERN_ERR PFX "Error setting COR value (reg=%x)\n",
- reg);
- return -EBUSY;
- }
-
- /* Set LEDs */
- iowrite16(1, card->bridge_io + 10);
- return 0;
-}
-
-static int orinoco_nortel_init_one(struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- int err;
- struct orinoco_private *priv;
- struct orinoco_pci_card *card;
- void __iomem *hermes_io, *bridge_io, *attr_io;
-
- err = pci_enable_device(pdev);
- if (err) {
- printk(KERN_ERR PFX "Cannot enable PCI device\n");
- return err;
- }
-
- err = pci_request_regions(pdev, DRIVER_NAME);
- if (err) {
- printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
- goto fail_resources;
- }
-
- bridge_io = pci_iomap(pdev, 0, 0);
- if (!bridge_io) {
- printk(KERN_ERR PFX "Cannot map bridge registers\n");
- err = -EIO;
- goto fail_map_bridge;
- }
-
- attr_io = pci_iomap(pdev, 1, 0);
- if (!attr_io) {
- printk(KERN_ERR PFX "Cannot map PCMCIA attributes\n");
- err = -EIO;
- goto fail_map_attr;
- }
-
- hermes_io = pci_iomap(pdev, 2, 0);
- if (!hermes_io) {
- printk(KERN_ERR PFX "Cannot map chipset registers\n");
- err = -EIO;
- goto fail_map_hermes;
- }
-
- /* Allocate network device */
- priv = alloc_orinocodev(sizeof(*card), &pdev->dev,
- orinoco_nortel_cor_reset, NULL);
- if (!priv) {
- printk(KERN_ERR PFX "Cannot allocate network device\n");
- err = -ENOMEM;
- goto fail_alloc;
- }
-
- card = priv->card;
- card->bridge_io = bridge_io;
- card->attr_io = attr_io;
-
- hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING);
-
- err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
- DRIVER_NAME, priv);
- if (err) {
- printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
- err = -EBUSY;
- goto fail_irq;
- }
-
- err = orinoco_nortel_hw_init(card);
- if (err) {
- printk(KERN_ERR PFX "Hardware initialization failed\n");
- goto fail;
- }
-
- err = orinoco_nortel_cor_reset(priv);
- if (err) {
- printk(KERN_ERR PFX "Initial reset failed\n");
- goto fail;
- }
-
- err = orinoco_init(priv);
- if (err) {
- printk(KERN_ERR PFX "orinoco_init() failed\n");
- goto fail;
- }
-
- err = orinoco_if_add(priv, 0, 0, NULL);
- if (err) {
- printk(KERN_ERR PFX "orinoco_if_add() failed\n");
- goto fail_wiphy;
- }
-
- pci_set_drvdata(pdev, priv);
-
- return 0;
-
- fail_wiphy:
- wiphy_unregister(priv_to_wiphy(priv));
- fail:
- free_irq(pdev->irq, priv);
-
- fail_irq:
- free_orinocodev(priv);
-
- fail_alloc:
- pci_iounmap(pdev, hermes_io);
-
- fail_map_hermes:
- pci_iounmap(pdev, attr_io);
-
- fail_map_attr:
- pci_iounmap(pdev, bridge_io);
-
- fail_map_bridge:
- pci_release_regions(pdev);
-
- fail_resources:
- pci_disable_device(pdev);
-
- return err;
-}
-
-static void orinoco_nortel_remove_one(struct pci_dev *pdev)
-{
- struct orinoco_private *priv = pci_get_drvdata(pdev);
- struct orinoco_pci_card *card = priv->card;
-
- /* Clear LEDs */
- iowrite16(0, card->bridge_io + 10);
-
- orinoco_if_del(priv);
- wiphy_unregister(priv_to_wiphy(priv));
- free_irq(pdev->irq, priv);
- free_orinocodev(priv);
- pci_iounmap(pdev, priv->hw.iobase);
- pci_iounmap(pdev, card->attr_io);
- pci_iounmap(pdev, card->bridge_io);
- pci_release_regions(pdev);
- pci_disable_device(pdev);
-}
-
-static const struct pci_device_id orinoco_nortel_id_table[] = {
- /* Nortel emobility PCI */
- {0x126c, 0x8030, PCI_ANY_ID, PCI_ANY_ID,},
- /* Symbol LA-4123 PCI */
- {0x1562, 0x0001, PCI_ANY_ID, PCI_ANY_ID,},
- {0,},
-};
-
-MODULE_DEVICE_TABLE(pci, orinoco_nortel_id_table);
-
-static struct pci_driver orinoco_nortel_driver = {
- .name = DRIVER_NAME,
- .id_table = orinoco_nortel_id_table,
- .probe = orinoco_nortel_init_one,
- .remove = orinoco_nortel_remove_one,
- .driver.pm = &orinoco_pci_pm_ops,
-};
-
-static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
- " (Tobias Hoffmann & Christoph Jungegger <disdos@traum404.de>)";
-MODULE_AUTHOR("Christoph Jungegger <disdos@traum404.de>");
-MODULE_DESCRIPTION("Driver for wireless LAN cards using the Nortel PCI bridge");
-MODULE_LICENSE("Dual MPL/GPL");
-
-static int __init orinoco_nortel_init(void)
-{
- printk(KERN_DEBUG "%s\n", version);
- return pci_register_driver(&orinoco_nortel_driver);
-}
-
-static void __exit orinoco_nortel_exit(void)
-{
- pci_unregister_driver(&orinoco_nortel_driver);
-}
-
-module_init(orinoco_nortel_init);
-module_exit(orinoco_nortel_exit);
diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_pci.c b/drivers/net/wireless/intersil/orinoco/orinoco_pci.c
deleted file mode 100644
index 7e3a6dd60c15..000000000000
--- a/drivers/net/wireless/intersil/orinoco/orinoco_pci.c
+++ /dev/null
@@ -1,257 +0,0 @@
-/* orinoco_pci.c
- *
- * Driver for Prism 2.5/3 devices that have a direct PCI interface
- * (i.e. these are not PCMCIA cards in a PCMCIA-to-PCI bridge).
- * The card contains only one PCI region, which contains all the usual
- * hermes registers, as well as the COR register.
- *
- * Current maintainers are:
- * Pavel Roskin <proski AT gnu.org>
- * and David Gibson <hermes AT gibson.dropbear.id.au>
- *
- * Some of this code is borrowed from orinoco_plx.c
- * Copyright (C) 2001 Daniel Barlow <dan AT telent.net>
- * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing
- * has been copied from it. linux-wlan-ng-0.1.10 is originally :
- * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
- * This file originally written by:
- * Copyright (C) 2001 Jean Tourrilhes <jt AT hpl.hp.com>
- * And is now maintained by:
- * (C) Copyright David Gibson, IBM Corp. 2002-2003.
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#define DRIVER_NAME "orinoco_pci"
-#define PFX DRIVER_NAME ": "
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-
-#include "orinoco.h"
-#include "orinoco_pci.h"
-
-/* Offset of the COR register of the PCI card */
-#define HERMES_PCI_COR (0x26)
-
-/* Bitmask to reset the card */
-#define HERMES_PCI_COR_MASK (0x0080)
-
-/* Magic timeouts for doing the reset.
- * Those times are straight from wlan-ng, and it is claimed that they
- * are necessary. Alan will kill me. Take your time and grab a coffee. */
-#define HERMES_PCI_COR_ONT (250) /* ms */
-#define HERMES_PCI_COR_OFFT (500) /* ms */
-#define HERMES_PCI_COR_BUSYT (500) /* ms */
-
-/*
- * Do a soft reset of the card using the Configuration Option Register
- * We need this to get going...
- * This is the part of the code that is strongly inspired from wlan-ng
- *
- * Note : This code is done with irq enabled. This mean that many
- * interrupts will occur while we are there. This is why we use the
- * jiffies to regulate time instead of a straight mdelay(). Usually we
- * need only around 245 iteration of the loop to do 250 ms delay.
- *
- * Note bis : Don't try to access HERMES_CMD during the reset phase.
- * It just won't work !
- */
-static int orinoco_pci_cor_reset(struct orinoco_private *priv)
-{
- struct hermes *hw = &priv->hw;
- unsigned long timeout;
- u16 reg;
-
- /* Assert the reset until the card notices */
- hermes_write_regn(hw, PCI_COR, HERMES_PCI_COR_MASK);
- mdelay(HERMES_PCI_COR_ONT);
-
- /* Give time for the card to recover from this hard effort */
- hermes_write_regn(hw, PCI_COR, 0x0000);
- mdelay(HERMES_PCI_COR_OFFT);
-
- /* The card is ready when it's no longer busy */
- timeout = jiffies + msecs_to_jiffies(HERMES_PCI_COR_BUSYT);
- reg = hermes_read_regn(hw, CMD);
- while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) {
- mdelay(1);
- reg = hermes_read_regn(hw, CMD);
- }
-
- /* Still busy? */
- if (reg & HERMES_CMD_BUSY) {
- printk(KERN_ERR PFX "Busy timeout\n");
- return -ETIMEDOUT;
- }
-
- return 0;
-}
-
-static int orinoco_pci_init_one(struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- int err;
- struct orinoco_private *priv;
- struct orinoco_pci_card *card;
- void __iomem *hermes_io;
-
- err = pci_enable_device(pdev);
- if (err) {
- printk(KERN_ERR PFX "Cannot enable PCI device\n");
- return err;
- }
-
- err = pci_request_regions(pdev, DRIVER_NAME);
- if (err) {
- printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
- goto fail_resources;
- }
-
- hermes_io = pci_iomap(pdev, 0, 0);
- if (!hermes_io) {
- printk(KERN_ERR PFX "Cannot remap chipset registers\n");
- err = -EIO;
- goto fail_map_hermes;
- }
-
- /* Allocate network device */
- priv = alloc_orinocodev(sizeof(*card), &pdev->dev,
- orinoco_pci_cor_reset, NULL);
- if (!priv) {
- printk(KERN_ERR PFX "Cannot allocate network device\n");
- err = -ENOMEM;
- goto fail_alloc;
- }
-
- card = priv->card;
-
- hermes_struct_init(&priv->hw, hermes_io, HERMES_32BIT_REGSPACING);
-
- err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
- DRIVER_NAME, priv);
- if (err) {
- printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
- err = -EBUSY;
- goto fail_irq;
- }
-
- err = orinoco_pci_cor_reset(priv);
- if (err) {
- printk(KERN_ERR PFX "Initial reset failed\n");
- goto fail;
- }
-
- err = orinoco_init(priv);
- if (err) {
- printk(KERN_ERR PFX "orinoco_init() failed\n");
- goto fail;
- }
-
- err = orinoco_if_add(priv, 0, 0, NULL);
- if (err) {
- printk(KERN_ERR PFX "orinoco_if_add() failed\n");
- goto fail_wiphy;
- }
-
- pci_set_drvdata(pdev, priv);
-
- return 0;
-
- fail_wiphy:
- wiphy_unregister(priv_to_wiphy(priv));
- fail:
- free_irq(pdev->irq, priv);
-
- fail_irq:
- free_orinocodev(priv);
-
- fail_alloc:
- pci_iounmap(pdev, hermes_io);
-
- fail_map_hermes:
- pci_release_regions(pdev);
-
- fail_resources:
- pci_disable_device(pdev);
-
- return err;
-}
-
-static void orinoco_pci_remove_one(struct pci_dev *pdev)
-{
- struct orinoco_private *priv = pci_get_drvdata(pdev);
-
- orinoco_if_del(priv);
- wiphy_unregister(priv_to_wiphy(priv));
- free_irq(pdev->irq, priv);
- free_orinocodev(priv);
- pci_iounmap(pdev, priv->hw.iobase);
- pci_release_regions(pdev);
- pci_disable_device(pdev);
-}
-
-static const struct pci_device_id orinoco_pci_id_table[] = {
- /* Intersil Prism 3 */
- {0x1260, 0x3872, PCI_ANY_ID, PCI_ANY_ID,},
- /* Intersil Prism 2.5 */
- {0x1260, 0x3873, PCI_ANY_ID, PCI_ANY_ID,},
- /* Samsung MagicLAN SWL-2210P */
- {0x167d, 0xa000, PCI_ANY_ID, PCI_ANY_ID,},
- {0,},
-};
-
-MODULE_DEVICE_TABLE(pci, orinoco_pci_id_table);
-
-static struct pci_driver orinoco_pci_driver = {
- .name = DRIVER_NAME,
- .id_table = orinoco_pci_id_table,
- .probe = orinoco_pci_init_one,
- .remove = orinoco_pci_remove_one,
- .driver.pm = &orinoco_pci_pm_ops,
-};
-
-static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
- " (Pavel Roskin <proski@gnu.org>,"
- " David Gibson <hermes@gibson.dropbear.id.au> &"
- " Jean Tourrilhes <jt@hpl.hp.com>)";
-MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> &"
- " David Gibson <hermes@gibson.dropbear.id.au>");
-MODULE_DESCRIPTION("Driver for wireless LAN cards using direct PCI interface");
-MODULE_LICENSE("Dual MPL/GPL");
-
-static int __init orinoco_pci_init(void)
-{
- printk(KERN_DEBUG "%s\n", version);
- return pci_register_driver(&orinoco_pci_driver);
-}
-
-static void __exit orinoco_pci_exit(void)
-{
- pci_unregister_driver(&orinoco_pci_driver);
-}
-
-module_init(orinoco_pci_init);
-module_exit(orinoco_pci_exit);
diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_pci.h b/drivers/net/wireless/intersil/orinoco/orinoco_pci.h
deleted file mode 100644
index d49d940864b4..000000000000
--- a/drivers/net/wireless/intersil/orinoco/orinoco_pci.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* orinoco_pci.h
- *
- * Common code for all Orinoco drivers for PCI devices, including
- * both native PCI and PCMCIA-to-PCI bridges.
- *
- * Copyright (C) 2005, Pavel Roskin.
- * See main.c for license.
- */
-
-#ifndef _ORINOCO_PCI_H
-#define _ORINOCO_PCI_H
-
-#include <linux/netdevice.h>
-
-/* Driver specific data */
-struct orinoco_pci_card {
- void __iomem *bridge_io;
- void __iomem *attr_io;
-};
-
-static int __maybe_unused orinoco_pci_suspend(struct device *dev_d)
-{
- struct pci_dev *pdev = to_pci_dev(dev_d);
- struct orinoco_private *priv = pci_get_drvdata(pdev);
-
- orinoco_down(priv);
- free_irq(pdev->irq, priv);
-
- return 0;
-}
-
-static int __maybe_unused orinoco_pci_resume(struct device *dev_d)
-{
- struct pci_dev *pdev = to_pci_dev(dev_d);
- struct orinoco_private *priv = pci_get_drvdata(pdev);
- struct net_device *dev = priv->ndev;
- int err;
-
- err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
- dev->name, priv);
- if (err) {
- printk(KERN_ERR "%s: cannot re-allocate IRQ on resume\n",
- dev->name);
- return -EBUSY;
- }
-
- return orinoco_up(priv);
-}
-
-static SIMPLE_DEV_PM_OPS(orinoco_pci_pm_ops,
- orinoco_pci_suspend,
- orinoco_pci_resume);
-
-#endif /* _ORINOCO_PCI_H */
diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_plx.c b/drivers/net/wireless/intersil/orinoco/orinoco_plx.c
deleted file mode 100644
index 73e6ae124013..000000000000
--- a/drivers/net/wireless/intersil/orinoco/orinoco_plx.c
+++ /dev/null
@@ -1,362 +0,0 @@
-/* orinoco_plx.c
- *
- * Driver for Prism II devices which would usually be driven by orinoco_cs,
- * but are connected to the PCI bus by a PLX9052.
- *
- * Current maintainers are:
- * Pavel Roskin <proski AT gnu.org>
- * and David Gibson <hermes AT gibson.dropbear.id.au>
- *
- * (C) Copyright David Gibson, IBM Corp. 2001-2003.
- * Copyright (C) 2001 Daniel Barlow
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- *
- * Here's the general details on how the PLX9052 adapter works:
- *
- * - Two PCI I/O address spaces, one 0x80 long which contains the
- * PLX9052 registers, and one that's 0x40 long mapped to the PCMCIA
- * slot I/O address space.
- *
- * - One PCI memory address space, mapped to the PCMCIA attribute space
- * (containing the CIS).
- *
- * Using the later, you can read through the CIS data to make sure the
- * card is compatible with the driver. Keep in mind that the PCMCIA
- * spec specifies the CIS as the lower 8 bits of each word read from
- * the CIS, so to read the bytes of the CIS, read every other byte
- * (0,2,4,...). Passing that test, you need to enable the I/O address
- * space on the PCMCIA card via the PCMCIA COR register. This is the
- * first byte following the CIS. In my case (which may not have any
- * relation to what's on the PRISM2 cards), COR was at offset 0x800
- * within the PCI memory space. Write 0x41 to the COR register to
- * enable I/O mode and to select level triggered interrupts. To
- * confirm you actually succeeded, read the COR register back and make
- * sure it actually got set to 0x41, in case you have an unexpected
- * card inserted.
- *
- * Following that, you can treat the second PCI I/O address space (the
- * one that's not 0x80 in length) as the PCMCIA I/O space.
- *
- * Note that in the Eumitcom's source for their drivers, they register
- * the interrupt as edge triggered when registering it with the
- * Windows kernel. I don't recall how to register edge triggered on
- * Linux (if it can be done at all). But in some experimentation, I
- * don't see much operational difference between using either
- * interrupt mode. Don't mess with the interrupt mode in the COR
- * register though, as the PLX9052 wants level triggers with the way
- * the serial EEPROM configures it on the WL11000.
- *
- * There's some other little quirks related to timing that I bumped
- * into, but I don't recall right now. Also, there's two variants of
- * the WL11000 I've seen, revision A1 and T2. These seem to differ
- * slightly in the timings configured in the wait-state generator in
- * the PLX9052. There have also been some comments from Eumitcom that
- * cards shouldn't be hot swapped, apparently due to risk of cooking
- * the PLX9052. I'm unsure why they believe this, as I can't see
- * anything in the design that would really cause a problem, except
- * for crashing drivers not written to expect it. And having developed
- * drivers for the WL11000, I'd say it's quite tricky to write code
- * that will successfully deal with a hot unplug. Very odd things
- * happen on the I/O side of things. But anyway, be warned. Despite
- * that, I've hot-swapped a number of times during debugging and
- * driver development for various reasons (stuck WAIT# line after the
- * radio card's firmware locks up).
- */
-
-#define DRIVER_NAME "orinoco_plx"
-#define PFX DRIVER_NAME ": "
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <pcmcia/cisreg.h>
-
-#include "orinoco.h"
-#include "orinoco_pci.h"
-
-#define COR_OFFSET (0x3e0) /* COR attribute offset of Prism2 PC card */
-#define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */
-#define COR_RESET (0x80) /* reset bit in the COR register */
-#define PLX_RESET_TIME (500) /* milliseconds */
-
-#define PLX_INTCSR 0x4c /* Interrupt Control & Status Register */
-#define PLX_INTCSR_INTEN (1 << 6) /* Interrupt Enable bit */
-
-/*
- * Do a soft reset of the card using the Configuration Option Register
- */
-static int orinoco_plx_cor_reset(struct orinoco_private *priv)
-{
- struct hermes *hw = &priv->hw;
- struct orinoco_pci_card *card = priv->card;
- unsigned long timeout;
- u16 reg;
-
- iowrite8(COR_VALUE | COR_RESET, card->attr_io + COR_OFFSET);
- mdelay(1);
-
- iowrite8(COR_VALUE, card->attr_io + COR_OFFSET);
- mdelay(1);
-
- /* Just in case, wait more until the card is no longer busy */
- timeout = jiffies + msecs_to_jiffies(PLX_RESET_TIME);
- reg = hermes_read_regn(hw, CMD);
- while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) {
- mdelay(1);
- reg = hermes_read_regn(hw, CMD);
- }
-
- /* Still busy? */
- if (reg & HERMES_CMD_BUSY) {
- printk(KERN_ERR PFX "Busy timeout\n");
- return -ETIMEDOUT;
- }
-
- return 0;
-}
-
-static int orinoco_plx_hw_init(struct orinoco_pci_card *card)
-{
- int i;
- u32 csr_reg;
- static const u8 cis_magic[] = {
- 0x01, 0x03, 0x00, 0x00, 0xff, 0x17, 0x04, 0x67
- };
-
- printk(KERN_DEBUG PFX "CIS: ");
- for (i = 0; i < 16; i++)
- printk("%02X:", ioread8(card->attr_io + (i << 1)));
- printk("\n");
-
- /* Verify whether a supported PC card is present */
- /* FIXME: we probably need to be smarted about this */
- for (i = 0; i < sizeof(cis_magic); i++) {
- if (cis_magic[i] != ioread8(card->attr_io + (i << 1))) {
- printk(KERN_ERR PFX "The CIS value of Prism2 PC "
- "card is unexpected\n");
- return -ENODEV;
- }
- }
-
- /* bjoern: We need to tell the card to enable interrupts, in
- case the serial eprom didn't do this already. See the
- PLX9052 data book, p8-1 and 8-24 for reference. */
- csr_reg = ioread32(card->bridge_io + PLX_INTCSR);
- if (!(csr_reg & PLX_INTCSR_INTEN)) {
- csr_reg |= PLX_INTCSR_INTEN;
- iowrite32(csr_reg, card->bridge_io + PLX_INTCSR);
- csr_reg = ioread32(card->bridge_io + PLX_INTCSR);
- if (!(csr_reg & PLX_INTCSR_INTEN)) {
- printk(KERN_ERR PFX "Cannot enable interrupts\n");
- return -EIO;
- }
- }
-
- return 0;
-}
-
-static int orinoco_plx_init_one(struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- int err;
- struct orinoco_private *priv;
- struct orinoco_pci_card *card;
- void __iomem *hermes_io, *attr_io, *bridge_io;
-
- err = pci_enable_device(pdev);
- if (err) {
- printk(KERN_ERR PFX "Cannot enable PCI device\n");
- return err;
- }
-
- err = pci_request_regions(pdev, DRIVER_NAME);
- if (err) {
- printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
- goto fail_resources;
- }
-
- bridge_io = pci_iomap(pdev, 1, 0);
- if (!bridge_io) {
- printk(KERN_ERR PFX "Cannot map bridge registers\n");
- err = -EIO;
- goto fail_map_bridge;
- }
-
- attr_io = pci_iomap(pdev, 2, 0);
- if (!attr_io) {
- printk(KERN_ERR PFX "Cannot map PCMCIA attributes\n");
- err = -EIO;
- goto fail_map_attr;
- }
-
- hermes_io = pci_iomap(pdev, 3, 0);
- if (!hermes_io) {
- printk(KERN_ERR PFX "Cannot map chipset registers\n");
- err = -EIO;
- goto fail_map_hermes;
- }
-
- /* Allocate network device */
- priv = alloc_orinocodev(sizeof(*card), &pdev->dev,
- orinoco_plx_cor_reset, NULL);
- if (!priv) {
- printk(KERN_ERR PFX "Cannot allocate network device\n");
- err = -ENOMEM;
- goto fail_alloc;
- }
-
- card = priv->card;
- card->bridge_io = bridge_io;
- card->attr_io = attr_io;
-
- hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING);
-
- err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
- DRIVER_NAME, priv);
- if (err) {
- printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
- err = -EBUSY;
- goto fail_irq;
- }
-
- err = orinoco_plx_hw_init(card);
- if (err) {
- printk(KERN_ERR PFX "Hardware initialization failed\n");
- goto fail;
- }
-
- err = orinoco_plx_cor_reset(priv);
- if (err) {
- printk(KERN_ERR PFX "Initial reset failed\n");
- goto fail;
- }
-
- err = orinoco_init(priv);
- if (err) {
- printk(KERN_ERR PFX "orinoco_init() failed\n");
- goto fail;
- }
-
- err = orinoco_if_add(priv, 0, 0, NULL);
- if (err) {
- printk(KERN_ERR PFX "orinoco_if_add() failed\n");
- goto fail_wiphy;
- }
-
- pci_set_drvdata(pdev, priv);
-
- return 0;
-
- fail_wiphy:
- wiphy_unregister(priv_to_wiphy(priv));
- fail:
- free_irq(pdev->irq, priv);
-
- fail_irq:
- free_orinocodev(priv);
-
- fail_alloc:
- pci_iounmap(pdev, hermes_io);
-
- fail_map_hermes:
- pci_iounmap(pdev, attr_io);
-
- fail_map_attr:
- pci_iounmap(pdev, bridge_io);
-
- fail_map_bridge:
- pci_release_regions(pdev);
-
- fail_resources:
- pci_disable_device(pdev);
-
- return err;
-}
-
-static void orinoco_plx_remove_one(struct pci_dev *pdev)
-{
- struct orinoco_private *priv = pci_get_drvdata(pdev);
- struct orinoco_pci_card *card = priv->card;
-
- orinoco_if_del(priv);
- wiphy_unregister(priv_to_wiphy(priv));
- free_irq(pdev->irq, priv);
- free_orinocodev(priv);
- pci_iounmap(pdev, priv->hw.iobase);
- pci_iounmap(pdev, card->attr_io);
- pci_iounmap(pdev, card->bridge_io);
- pci_release_regions(pdev);
- pci_disable_device(pdev);
-}
-
-static const struct pci_device_id orinoco_plx_id_table[] = {
- {0x111a, 0x1023, PCI_ANY_ID, PCI_ANY_ID,}, /* Siemens SpeedStream SS1023 */
- {0x1385, 0x4100, PCI_ANY_ID, PCI_ANY_ID,}, /* Netgear MA301 */
- {0x15e8, 0x0130, PCI_ANY_ID, PCI_ANY_ID,}, /* Correga - does this work? */
- {0x1638, 0x1100, PCI_ANY_ID, PCI_ANY_ID,}, /* SMC EZConnect SMC2602W,
- Eumitcom PCI WL11000,
- Addtron AWA-100 */
- {0x16ab, 0x1100, PCI_ANY_ID, PCI_ANY_ID,}, /* Global Sun Tech GL24110P */
- {0x16ab, 0x1101, PCI_ANY_ID, PCI_ANY_ID,}, /* Reported working, but unknown */
- {0x16ab, 0x1102, PCI_ANY_ID, PCI_ANY_ID,}, /* Linksys WDT11 */
- {0x16ec, 0x3685, PCI_ANY_ID, PCI_ANY_ID,}, /* USR 2415 */
- {0xec80, 0xec00, PCI_ANY_ID, PCI_ANY_ID,}, /* Belkin F5D6000 tested by
- Brendan W. McAdams <rit AT jacked-in.org> */
- {0x10b7, 0x7770, PCI_ANY_ID, PCI_ANY_ID,}, /* 3Com AirConnect PCI tested by
- Damien Persohn <damien AT persohn.net> */
- {0,},
-};
-
-MODULE_DEVICE_TABLE(pci, orinoco_plx_id_table);
-
-static struct pci_driver orinoco_plx_driver = {
- .name = DRIVER_NAME,
- .id_table = orinoco_plx_id_table,
- .probe = orinoco_plx_init_one,
- .remove = orinoco_plx_remove_one,
- .driver.pm = &orinoco_pci_pm_ops,
-};
-
-static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
- " (Pavel Roskin <proski@gnu.org>,"
- " David Gibson <hermes@gibson.dropbear.id.au>,"
- " Daniel Barlow <dan@telent.net>)";
-MODULE_AUTHOR("Daniel Barlow <dan@telent.net>");
-MODULE_DESCRIPTION("Driver for wireless LAN cards using the PLX9052 PCI bridge");
-MODULE_LICENSE("Dual MPL/GPL");
-
-static int __init orinoco_plx_init(void)
-{
- printk(KERN_DEBUG "%s\n", version);
- return pci_register_driver(&orinoco_plx_driver);
-}
-
-static void __exit orinoco_plx_exit(void)
-{
- pci_unregister_driver(&orinoco_plx_driver);
-}
-
-module_init(orinoco_plx_init);
-module_exit(orinoco_plx_exit);
diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_tmd.c b/drivers/net/wireless/intersil/orinoco/orinoco_tmd.c
deleted file mode 100644
index 939d5a1dce97..000000000000
--- a/drivers/net/wireless/intersil/orinoco/orinoco_tmd.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/* orinoco_tmd.c
- *
- * Driver for Prism II devices which would usually be driven by orinoco_cs,
- * but are connected to the PCI bus by a TMD7160.
- *
- * Copyright (C) 2003 Joerg Dorchain <joerg AT dorchain.net>
- * based heavily upon orinoco_plx.c Copyright (C) 2001 Daniel Barlow
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- *
- * The actual driving is done by main.c, this is just resource
- * allocation stuff.
- *
- * This driver is modeled after the orinoco_plx driver. The main
- * difference is that the TMD chip has only IO port ranges and doesn't
- * provide access to the PCMCIA attribute space.
- *
- * Pheecom sells cards with the TMD chip as "ASIC version"
- */
-
-#define DRIVER_NAME "orinoco_tmd"
-#define PFX DRIVER_NAME ": "
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <pcmcia/cisreg.h>
-
-#include "orinoco.h"
-#include "orinoco_pci.h"
-
-#define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */
-#define COR_RESET (0x80) /* reset bit in the COR register */
-#define TMD_RESET_TIME (500) /* milliseconds */
-
-/*
- * Do a soft reset of the card using the Configuration Option Register
- */
-static int orinoco_tmd_cor_reset(struct orinoco_private *priv)
-{
- struct hermes *hw = &priv->hw;
- struct orinoco_pci_card *card = priv->card;
- unsigned long timeout;
- u16 reg;
-
- iowrite8(COR_VALUE | COR_RESET, card->bridge_io);
- mdelay(1);
-
- iowrite8(COR_VALUE, card->bridge_io);
- mdelay(1);
-
- /* Just in case, wait more until the card is no longer busy */
- timeout = jiffies + msecs_to_jiffies(TMD_RESET_TIME);
- reg = hermes_read_regn(hw, CMD);
- while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) {
- mdelay(1);
- reg = hermes_read_regn(hw, CMD);
- }
-
- /* Still busy? */
- if (reg & HERMES_CMD_BUSY) {
- printk(KERN_ERR PFX "Busy timeout\n");
- return -ETIMEDOUT;
- }
-
- return 0;
-}
-
-
-static int orinoco_tmd_init_one(struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- int err;
- struct orinoco_private *priv;
- struct orinoco_pci_card *card;
- void __iomem *hermes_io, *bridge_io;
-
- err = pci_enable_device(pdev);
- if (err) {
- printk(KERN_ERR PFX "Cannot enable PCI device\n");
- return err;
- }
-
- err = pci_request_regions(pdev, DRIVER_NAME);
- if (err) {
- printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
- goto fail_resources;
- }
-
- bridge_io = pci_iomap(pdev, 1, 0);
- if (!bridge_io) {
- printk(KERN_ERR PFX "Cannot map bridge registers\n");
- err = -EIO;
- goto fail_map_bridge;
- }
-
- hermes_io = pci_iomap(pdev, 2, 0);
- if (!hermes_io) {
- printk(KERN_ERR PFX "Cannot map chipset registers\n");
- err = -EIO;
- goto fail_map_hermes;
- }
-
- /* Allocate network device */
- priv = alloc_orinocodev(sizeof(*card), &pdev->dev,
- orinoco_tmd_cor_reset, NULL);
- if (!priv) {
- printk(KERN_ERR PFX "Cannot allocate network device\n");
- err = -ENOMEM;
- goto fail_alloc;
- }
-
- card = priv->card;
- card->bridge_io = bridge_io;
-
- hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING);
-
- err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
- DRIVER_NAME, priv);
- if (err) {
- printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
- err = -EBUSY;
- goto fail_irq;
- }
-
- err = orinoco_tmd_cor_reset(priv);
- if (err) {
- printk(KERN_ERR PFX "Initial reset failed\n");
- goto fail;
- }
-
- err = orinoco_init(priv);
- if (err) {
- printk(KERN_ERR PFX "orinoco_init() failed\n");
- goto fail;
- }
-
- err = orinoco_if_add(priv, 0, 0, NULL);
- if (err) {
- printk(KERN_ERR PFX "orinoco_if_add() failed\n");
- goto fail;
- }
-
- pci_set_drvdata(pdev, priv);
-
- return 0;
-
- fail:
- free_irq(pdev->irq, priv);
-
- fail_irq:
- free_orinocodev(priv);
-
- fail_alloc:
- pci_iounmap(pdev, hermes_io);
-
- fail_map_hermes:
- pci_iounmap(pdev, bridge_io);
-
- fail_map_bridge:
- pci_release_regions(pdev);
-
- fail_resources:
- pci_disable_device(pdev);
-
- return err;
-}
-
-static void orinoco_tmd_remove_one(struct pci_dev *pdev)
-{
- struct orinoco_private *priv = pci_get_drvdata(pdev);
- struct orinoco_pci_card *card = priv->card;
-
- orinoco_if_del(priv);
- free_irq(pdev->irq, priv);
- free_orinocodev(priv);
- pci_iounmap(pdev, priv->hw.iobase);
- pci_iounmap(pdev, card->bridge_io);
- pci_release_regions(pdev);
- pci_disable_device(pdev);
-}
-
-static const struct pci_device_id orinoco_tmd_id_table[] = {
- {0x15e8, 0x0131, PCI_ANY_ID, PCI_ANY_ID,}, /* NDC and OEMs, e.g. pheecom */
- {0,},
-};
-
-MODULE_DEVICE_TABLE(pci, orinoco_tmd_id_table);
-
-static struct pci_driver orinoco_tmd_driver = {
- .name = DRIVER_NAME,
- .id_table = orinoco_tmd_id_table,
- .probe = orinoco_tmd_init_one,
- .remove = orinoco_tmd_remove_one,
- .driver.pm = &orinoco_pci_pm_ops,
-};
-
-static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
- " (Joerg Dorchain <joerg@dorchain.net>)";
-MODULE_AUTHOR("Joerg Dorchain <joerg@dorchain.net>");
-MODULE_DESCRIPTION("Driver for wireless LAN cards using the TMD7160 PCI bridge");
-MODULE_LICENSE("Dual MPL/GPL");
-
-static int __init orinoco_tmd_init(void)
-{
- printk(KERN_DEBUG "%s\n", version);
- return pci_register_driver(&orinoco_tmd_driver);
-}
-
-static void __exit orinoco_tmd_exit(void)
-{
- pci_unregister_driver(&orinoco_tmd_driver);
-}
-
-module_init(orinoco_tmd_init);
-module_exit(orinoco_tmd_exit);
diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_usb.c b/drivers/net/wireless/intersil/orinoco/orinoco_usb.c
deleted file mode 100644
index 866e0230df25..000000000000
--- a/drivers/net/wireless/intersil/orinoco/orinoco_usb.c
+++ /dev/null
@@ -1,1787 +0,0 @@
-/*
- * USB Orinoco driver
- *
- * Copyright (c) 2003 Manuel Estrada Sainz
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- *
- * Queueing code based on linux-wlan-ng 0.2.1-pre5
- *
- * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
- *
- * The license is the same as above.
- *
- * Initialy based on USB Skeleton driver - 0.7
- *
- * Copyright (c) 2001 Greg Kroah-Hartman (greg@kroah.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * NOTE: The original USB Skeleton driver is GPL, but all that code is
- * gone so MPL/GPL applies.
- */
-
-#define DRIVER_NAME "orinoco_usb"
-#define PFX DRIVER_NAME ": "
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/errno.h>
-#include <linux/poll.h>
-#include <linux/slab.h>
-#include <linux/fcntl.h>
-#include <linux/spinlock.h>
-#include <linux/list.h>
-#include <linux/usb.h>
-#include <linux/timer.h>
-
-#include <linux/netdevice.h>
-#include <linux/if_arp.h>
-#include <linux/etherdevice.h>
-#include <linux/wireless.h>
-#include <linux/firmware.h>
-#include <linux/refcount.h>
-
-#include "mic.h"
-#include "orinoco.h"
-
-#ifndef URB_ASYNC_UNLINK
-#define URB_ASYNC_UNLINK 0
-#endif
-
-struct header_struct {
- /* 802.3 */
- u8 dest[ETH_ALEN];
- u8 src[ETH_ALEN];
- __be16 len;
- /* 802.2 */
- u8 dsap;
- u8 ssap;
- u8 ctrl;
- /* SNAP */
- u8 oui[3];
- __be16 ethertype;
-} __packed;
-
-struct ez_usb_fw {
- u16 size;
- const u8 *code;
-};
-
-static struct ez_usb_fw firmware = {
- .size = 0,
- .code = NULL,
-};
-
-/* Debugging macros */
-#undef err
-#define err(format, arg...) \
- do { printk(KERN_ERR PFX format "\n", ## arg); } while (0)
-
-MODULE_FIRMWARE("orinoco_ezusb_fw");
-
-/*
- * Under some conditions, the card gets stuck and stops paying attention
- * to the world (i.e. data communication stalls) until we do something to
- * it. Sending an INQ_TALLIES command seems to be enough and should be
- * harmless otherwise. This behaviour has been observed when using the
- * driver on a systemimager client during installation. In the past a
- * timer was used to send INQ_TALLIES commands when there was no other
- * activity, but it was troublesome and was removed.
- */
-
-#define USB_COMPAQ_VENDOR_ID 0x049f /* Compaq Computer Corp. */
-#define USB_COMPAQ_WL215_ID 0x001f /* Compaq WL215 USB Adapter */
-#define USB_COMPAQ_W200_ID 0x0076 /* Compaq W200 USB Adapter */
-#define USB_HP_WL215_ID 0x0082 /* Compaq WL215 USB Adapter */
-
-#define USB_MELCO_VENDOR_ID 0x0411
-#define USB_BUFFALO_L11_ID 0x0006 /* BUFFALO WLI-USB-L11 */
-#define USB_BUFFALO_L11G_WR_ID 0x000B /* BUFFALO WLI-USB-L11G-WR */
-#define USB_BUFFALO_L11G_ID 0x000D /* BUFFALO WLI-USB-L11G */
-
-#define USB_LUCENT_VENDOR_ID 0x047E /* Lucent Technologies */
-#define USB_LUCENT_ORINOCO_ID 0x0300 /* Lucent/Agere Orinoco USB Client */
-
-#define USB_AVAYA8_VENDOR_ID 0x0D98
-#define USB_AVAYAE_VENDOR_ID 0x0D9E
-#define USB_AVAYA_WIRELESS_ID 0x0300 /* Avaya USB Wireless Card */
-
-#define USB_AGERE_VENDOR_ID 0x0D4E /* Agere Systems */
-#define USB_AGERE_MODEL0801_ID 0x1000 /* USB Wireless Card Model 0801 */
-#define USB_AGERE_MODEL0802_ID 0x1001 /* USB Wireless Card Model 0802 */
-#define USB_AGERE_REBRANDED_ID 0x047A /* USB WLAN Card */
-
-#define USB_ELSA_VENDOR_ID 0x05CC
-#define USB_ELSA_AIRLANCER_ID 0x3100 /* ELSA AirLancer USB-11 */
-
-#define USB_LEGEND_VENDOR_ID 0x0E7C
-#define USB_LEGEND_JOYNET_ID 0x0300 /* Joynet USB WLAN Card */
-
-#define USB_SAMSUNG_VENDOR_ID 0x04E8
-#define USB_SAMSUNG_SEW2001U1_ID 0x5002 /* Samsung SEW-2001u Card */
-#define USB_SAMSUNG_SEW2001U2_ID 0x5B11 /* Samsung SEW-2001u Card */
-#define USB_SAMSUNG_SEW2003U_ID 0x7011 /* Samsung SEW-2003U Card */
-
-#define USB_IGATE_VENDOR_ID 0x0681
-#define USB_IGATE_IGATE_11M_ID 0x0012 /* I-GATE 11M USB Card */
-
-#define USB_FUJITSU_VENDOR_ID 0x0BF8
-#define USB_FUJITSU_E1100_ID 0x1002 /* connect2AIR WLAN E-1100 USB */
-
-#define USB_2WIRE_VENDOR_ID 0x1630
-#define USB_2WIRE_WIRELESS_ID 0xff81 /* 2Wire USB Wireless adapter */
-
-
-#define EZUSB_REQUEST_FW_TRANS 0xA0
-#define EZUSB_REQUEST_TRIGGER 0xAA
-#define EZUSB_REQUEST_TRIG_AC 0xAC
-#define EZUSB_CPUCS_REG 0x7F92
-
-#define EZUSB_RID_TX 0x0700
-#define EZUSB_RID_RX 0x0701
-#define EZUSB_RID_INIT1 0x0702
-#define EZUSB_RID_ACK 0x0710
-#define EZUSB_RID_READ_PDA 0x0800
-#define EZUSB_RID_PROG_INIT 0x0852
-#define EZUSB_RID_PROG_SET_ADDR 0x0853
-#define EZUSB_RID_PROG_BYTES 0x0854
-#define EZUSB_RID_PROG_END 0x0855
-#define EZUSB_RID_DOCMD 0x0860
-
-/* Recognize info frames */
-#define EZUSB_IS_INFO(id) ((id >= 0xF000) && (id <= 0xF2FF))
-
-#define EZUSB_MAGIC 0x0210
-
-#define EZUSB_FRAME_DATA 1
-#define EZUSB_FRAME_CONTROL 2
-
-#define DEF_TIMEOUT (3 * HZ)
-
-#define BULK_BUF_SIZE 2048
-
-#define MAX_DL_SIZE (BULK_BUF_SIZE - sizeof(struct ezusb_packet))
-
-#define FW_BUF_SIZE 64
-#define FW_VAR_OFFSET_PTR 0x359
-#define FW_VAR_VALUE 0
-#define FW_HOLE_START 0x100
-#define FW_HOLE_END 0x300
-
-struct ezusb_packet {
- __le16 magic; /* 0x0210 */
- u8 req_reply_count;
- u8 ans_reply_count;
- __le16 frame_type; /* 0x01 for data frames, 0x02 otherwise */
- __le16 size; /* transport size */
- __le16 crc; /* CRC up to here */
- __le16 hermes_len;
- __le16 hermes_rid;
- u8 data[];
-} __packed;
-
-/* Table of devices that work or may work with this driver */
-static const struct usb_device_id ezusb_table[] = {
- {USB_DEVICE(USB_COMPAQ_VENDOR_ID, USB_COMPAQ_WL215_ID)},
- {USB_DEVICE(USB_COMPAQ_VENDOR_ID, USB_HP_WL215_ID)},
- {USB_DEVICE(USB_COMPAQ_VENDOR_ID, USB_COMPAQ_W200_ID)},
- {USB_DEVICE(USB_MELCO_VENDOR_ID, USB_BUFFALO_L11_ID)},
- {USB_DEVICE(USB_MELCO_VENDOR_ID, USB_BUFFALO_L11G_WR_ID)},
- {USB_DEVICE(USB_MELCO_VENDOR_ID, USB_BUFFALO_L11G_ID)},
- {USB_DEVICE(USB_LUCENT_VENDOR_ID, USB_LUCENT_ORINOCO_ID)},
- {USB_DEVICE(USB_AVAYA8_VENDOR_ID, USB_AVAYA_WIRELESS_ID)},
- {USB_DEVICE(USB_AVAYAE_VENDOR_ID, USB_AVAYA_WIRELESS_ID)},
- {USB_DEVICE(USB_AGERE_VENDOR_ID, USB_AGERE_MODEL0801_ID)},
- {USB_DEVICE(USB_AGERE_VENDOR_ID, USB_AGERE_MODEL0802_ID)},
- {USB_DEVICE(USB_ELSA_VENDOR_ID, USB_ELSA_AIRLANCER_ID)},
- {USB_DEVICE(USB_LEGEND_VENDOR_ID, USB_LEGEND_JOYNET_ID)},
- {USB_DEVICE_VER(USB_SAMSUNG_VENDOR_ID, USB_SAMSUNG_SEW2001U1_ID,
- 0, 0)},
- {USB_DEVICE(USB_SAMSUNG_VENDOR_ID, USB_SAMSUNG_SEW2001U2_ID)},
- {USB_DEVICE(USB_SAMSUNG_VENDOR_ID, USB_SAMSUNG_SEW2003U_ID)},
- {USB_DEVICE(USB_IGATE_VENDOR_ID, USB_IGATE_IGATE_11M_ID)},
- {USB_DEVICE(USB_FUJITSU_VENDOR_ID, USB_FUJITSU_E1100_ID)},
- {USB_DEVICE(USB_2WIRE_VENDOR_ID, USB_2WIRE_WIRELESS_ID)},
- {USB_DEVICE(USB_AGERE_VENDOR_ID, USB_AGERE_REBRANDED_ID)},
- {} /* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE(usb, ezusb_table);
-
-/* Structure to hold all of our device specific stuff */
-struct ezusb_priv {
- struct usb_device *udev;
- struct net_device *dev;
- struct mutex mtx;
- spinlock_t req_lock;
- struct list_head req_pending;
- struct list_head req_active;
- spinlock_t reply_count_lock;
- u16 hermes_reg_fake[0x40];
- u8 *bap_buf;
- struct urb *read_urb;
- int read_pipe;
- int write_pipe;
- u8 reply_count;
-};
-
-enum ezusb_state {
- EZUSB_CTX_START,
- EZUSB_CTX_QUEUED,
- EZUSB_CTX_REQ_SUBMITTED,
- EZUSB_CTX_REQ_COMPLETE,
- EZUSB_CTX_RESP_RECEIVED,
- EZUSB_CTX_REQ_TIMEOUT,
- EZUSB_CTX_REQ_FAILED,
- EZUSB_CTX_RESP_TIMEOUT,
- EZUSB_CTX_REQSUBMIT_FAIL,
- EZUSB_CTX_COMPLETE,
-};
-
-struct request_context {
- struct list_head list;
- refcount_t refcount;
- struct completion done; /* Signals that CTX is dead */
- int killed;
- struct urb *outurb; /* OUT for req pkt */
- struct ezusb_priv *upriv;
- struct ezusb_packet *buf;
- int buf_length;
- struct timer_list timer; /* Timeout handling */
- enum ezusb_state state; /* Current state */
- /* the RID that we will wait for */
- u16 out_rid;
- u16 in_rid;
-};
-
-
-/* Forward declarations */
-static void ezusb_ctx_complete(struct request_context *ctx);
-static void ezusb_req_queue_run(struct ezusb_priv *upriv);
-static void ezusb_bulk_in_callback(struct urb *urb);
-
-static inline u8 ezusb_reply_inc(u8 count)
-{
- if (count < 0x7F)
- return count + 1;
- else
- return 1;
-}
-
-static void ezusb_request_context_put(struct request_context *ctx)
-{
- if (!refcount_dec_and_test(&ctx->refcount))
- return;
-
- WARN_ON(!ctx->done.done);
- BUG_ON(ctx->outurb->status == -EINPROGRESS);
- BUG_ON(timer_pending(&ctx->timer));
- usb_free_urb(ctx->outurb);
- kfree(ctx->buf);
- kfree(ctx);
-}
-
-static inline void ezusb_mod_timer(struct ezusb_priv *upriv,
- struct timer_list *timer,
- unsigned long expire)
-{
- if (!upriv->udev)
- return;
- mod_timer(timer, expire);
-}
-
-static void ezusb_request_timerfn(struct timer_list *t)
-{
- struct request_context *ctx = from_timer(ctx, t, timer);
-
- ctx->outurb->transfer_flags |= URB_ASYNC_UNLINK;
- if (usb_unlink_urb(ctx->outurb) == -EINPROGRESS) {
- ctx->state = EZUSB_CTX_REQ_TIMEOUT;
- } else {
- ctx->state = EZUSB_CTX_RESP_TIMEOUT;
- dev_dbg(&ctx->outurb->dev->dev, "couldn't unlink\n");
- refcount_inc(&ctx->refcount);
- ctx->killed = 1;
- ezusb_ctx_complete(ctx);
- ezusb_request_context_put(ctx);
- }
-};
-
-static struct request_context *ezusb_alloc_ctx(struct ezusb_priv *upriv,
- u16 out_rid, u16 in_rid)
-{
- struct request_context *ctx;
-
- ctx = kzalloc(sizeof(*ctx), GFP_ATOMIC);
- if (!ctx)
- return NULL;
-
- ctx->buf = kmalloc(BULK_BUF_SIZE, GFP_ATOMIC);
- if (!ctx->buf) {
- kfree(ctx);
- return NULL;
- }
- ctx->outurb = usb_alloc_urb(0, GFP_ATOMIC);
- if (!ctx->outurb) {
- kfree(ctx->buf);
- kfree(ctx);
- return NULL;
- }
-
- ctx->upriv = upriv;
- ctx->state = EZUSB_CTX_START;
- ctx->out_rid = out_rid;
- ctx->in_rid = in_rid;
-
- refcount_set(&ctx->refcount, 1);
- init_completion(&ctx->done);
-
- timer_setup(&ctx->timer, ezusb_request_timerfn, 0);
- return ctx;
-}
-
-static void ezusb_ctx_complete(struct request_context *ctx)
-{
- struct ezusb_priv *upriv = ctx->upriv;
- unsigned long flags;
-
- spin_lock_irqsave(&upriv->req_lock, flags);
-
- list_del_init(&ctx->list);
- if (upriv->udev) {
- spin_unlock_irqrestore(&upriv->req_lock, flags);
- ezusb_req_queue_run(upriv);
- spin_lock_irqsave(&upriv->req_lock, flags);
- }
-
- switch (ctx->state) {
- case EZUSB_CTX_COMPLETE:
- case EZUSB_CTX_REQSUBMIT_FAIL:
- case EZUSB_CTX_REQ_FAILED:
- case EZUSB_CTX_REQ_TIMEOUT:
- case EZUSB_CTX_RESP_TIMEOUT:
- spin_unlock_irqrestore(&upriv->req_lock, flags);
-
- if ((ctx->out_rid == EZUSB_RID_TX) && upriv->dev) {
- struct net_device *dev = upriv->dev;
- struct net_device_stats *stats = &dev->stats;
-
- if (ctx->state != EZUSB_CTX_COMPLETE)
- stats->tx_errors++;
- else
- stats->tx_packets++;
-
- netif_wake_queue(dev);
- }
- complete_all(&ctx->done);
- ezusb_request_context_put(ctx);
- break;
-
- default:
- spin_unlock_irqrestore(&upriv->req_lock, flags);
- if (!upriv->udev) {
- /* This is normal, as all request contexts get flushed
- * when the device is disconnected */
- err("Called, CTX not terminating, but device gone");
- complete_all(&ctx->done);
- ezusb_request_context_put(ctx);
- break;
- }
-
- err("Called, CTX not in terminating state.");
- /* Things are really bad if this happens. Just leak
- * the CTX because it may still be linked to the
- * queue or the OUT urb may still be active.
- * Just leaking at least prevents an Oops or Panic.
- */
- break;
- }
-}
-
-/*
- * ezusb_req_queue_run:
- * Description:
- * Note: Only one active CTX at any one time, because there's no
- * other (reliable) way to match the response URB to the correct
- * CTX.
- */
-static void ezusb_req_queue_run(struct ezusb_priv *upriv)
-{
- unsigned long flags;
- struct request_context *ctx;
- int result;
-
- spin_lock_irqsave(&upriv->req_lock, flags);
-
- if (!list_empty(&upriv->req_active))
- goto unlock;
-
- if (list_empty(&upriv->req_pending))
- goto unlock;
-
- ctx =
- list_entry(upriv->req_pending.next, struct request_context,
- list);
-
- if (!ctx->upriv->udev)
- goto unlock;
-
- /* We need to split this off to avoid a race condition */
- list_move_tail(&ctx->list, &upriv->req_active);
-
- if (ctx->state == EZUSB_CTX_QUEUED) {
- refcount_inc(&ctx->refcount);
- result = usb_submit_urb(ctx->outurb, GFP_ATOMIC);
- if (result) {
- ctx->state = EZUSB_CTX_REQSUBMIT_FAIL;
-
- spin_unlock_irqrestore(&upriv->req_lock, flags);
-
- err("Fatal, failed to submit command urb."
- " error=%d\n", result);
-
- ezusb_ctx_complete(ctx);
- ezusb_request_context_put(ctx);
- goto done;
- }
-
- ctx->state = EZUSB_CTX_REQ_SUBMITTED;
- ezusb_mod_timer(ctx->upriv, &ctx->timer,
- jiffies + DEF_TIMEOUT);
- }
-
- unlock:
- spin_unlock_irqrestore(&upriv->req_lock, flags);
-
- done:
- return;
-}
-
-static void ezusb_req_enqueue_run(struct ezusb_priv *upriv,
- struct request_context *ctx)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&upriv->req_lock, flags);
-
- if (!ctx->upriv->udev) {
- spin_unlock_irqrestore(&upriv->req_lock, flags);
- goto done;
- }
- refcount_inc(&ctx->refcount);
- list_add_tail(&ctx->list, &upriv->req_pending);
- spin_unlock_irqrestore(&upriv->req_lock, flags);
-
- ctx->state = EZUSB_CTX_QUEUED;
- ezusb_req_queue_run(upriv);
-
- done:
- return;
-}
-
-static void ezusb_request_out_callback(struct urb *urb)
-{
- unsigned long flags;
- enum ezusb_state state;
- struct request_context *ctx = urb->context;
- struct ezusb_priv *upriv = ctx->upriv;
-
- spin_lock_irqsave(&upriv->req_lock, flags);
-
- del_timer(&ctx->timer);
-
- if (ctx->killed) {
- spin_unlock_irqrestore(&upriv->req_lock, flags);
- pr_warn("interrupt called with dead ctx\n");
- goto out;
- }
-
- state = ctx->state;
-
- if (urb->status == 0) {
- switch (state) {
- case EZUSB_CTX_REQ_SUBMITTED:
- if (ctx->in_rid) {
- ctx->state = EZUSB_CTX_REQ_COMPLETE;
- /* reply URB still pending */
- ezusb_mod_timer(upriv, &ctx->timer,
- jiffies + DEF_TIMEOUT);
- spin_unlock_irqrestore(&upriv->req_lock,
- flags);
- break;
- }
- fallthrough;
- case EZUSB_CTX_RESP_RECEIVED:
- /* IN already received before this OUT-ACK */
- ctx->state = EZUSB_CTX_COMPLETE;
- spin_unlock_irqrestore(&upriv->req_lock, flags);
- ezusb_ctx_complete(ctx);
- break;
-
- default:
- spin_unlock_irqrestore(&upriv->req_lock, flags);
- err("Unexpected state(0x%x, %d) in OUT URB",
- state, urb->status);
- break;
- }
- } else {
- /* If someone cancels the OUT URB then its status
- * should be either -ECONNRESET or -ENOENT.
- */
- switch (state) {
- case EZUSB_CTX_REQ_SUBMITTED:
- case EZUSB_CTX_RESP_RECEIVED:
- ctx->state = EZUSB_CTX_REQ_FAILED;
- fallthrough;
-
- case EZUSB_CTX_REQ_FAILED:
- case EZUSB_CTX_REQ_TIMEOUT:
- spin_unlock_irqrestore(&upriv->req_lock, flags);
-
- ezusb_ctx_complete(ctx);
- break;
-
- default:
- spin_unlock_irqrestore(&upriv->req_lock, flags);
-
- err("Unexpected state(0x%x, %d) in OUT URB",
- state, urb->status);
- break;
- }
- }
- out:
- ezusb_request_context_put(ctx);
-}
-
-static void ezusb_request_in_callback(struct ezusb_priv *upriv,
- struct urb *urb)
-{
- struct ezusb_packet *ans = urb->transfer_buffer;
- struct request_context *ctx = NULL;
- enum ezusb_state state;
- unsigned long flags;
-
- /* Find the CTX on the active queue that requested this URB */
- spin_lock_irqsave(&upriv->req_lock, flags);
- if (upriv->udev) {
- struct list_head *item;
-
- list_for_each(item, &upriv->req_active) {
- struct request_context *c;
- int reply_count;
-
- c = list_entry(item, struct request_context, list);
- reply_count =
- ezusb_reply_inc(c->buf->req_reply_count);
- if ((ans->ans_reply_count == reply_count)
- && (le16_to_cpu(ans->hermes_rid) == c->in_rid)) {
- ctx = c;
- break;
- }
- netdev_dbg(upriv->dev, "Skipped (0x%x/0x%x) (%d/%d)\n",
- le16_to_cpu(ans->hermes_rid), c->in_rid,
- ans->ans_reply_count, reply_count);
- }
- }
-
- if (ctx == NULL) {
- spin_unlock_irqrestore(&upriv->req_lock, flags);
- err("%s: got unexpected RID: 0x%04X", __func__,
- le16_to_cpu(ans->hermes_rid));
- ezusb_req_queue_run(upriv);
- return;
- }
-
- /* The data we want is in the in buffer, exchange */
- urb->transfer_buffer = ctx->buf;
- ctx->buf = (void *) ans;
- ctx->buf_length = urb->actual_length;
-
- state = ctx->state;
- switch (state) {
- case EZUSB_CTX_REQ_SUBMITTED:
- /* We have received our response URB before
- * our request has been acknowledged. Do NOT
- * destroy our CTX yet, because our OUT URB
- * is still alive ...
- */
- ctx->state = EZUSB_CTX_RESP_RECEIVED;
- spin_unlock_irqrestore(&upriv->req_lock, flags);
-
- /* Let the machine continue running. */
- break;
-
- case EZUSB_CTX_REQ_COMPLETE:
- /* This is the usual path: our request
- * has already been acknowledged, and
- * we have now received the reply.
- */
- ctx->state = EZUSB_CTX_COMPLETE;
-
- /* Stop the intimer */
- del_timer(&ctx->timer);
- spin_unlock_irqrestore(&upriv->req_lock, flags);
-
- /* Call the completion handler */
- ezusb_ctx_complete(ctx);
- break;
-
- default:
- spin_unlock_irqrestore(&upriv->req_lock, flags);
-
- pr_warn("Matched IN URB, unexpected context state(0x%x)\n",
- state);
- /* Throw this CTX away and try submitting another */
- del_timer(&ctx->timer);
- ctx->outurb->transfer_flags |= URB_ASYNC_UNLINK;
- usb_unlink_urb(ctx->outurb);
- ezusb_req_queue_run(upriv);
- break;
- } /* switch */
-}
-
-typedef void (*ezusb_ctx_wait)(struct ezusb_priv *, struct request_context *);
-
-static void ezusb_req_ctx_wait_compl(struct ezusb_priv *upriv,
- struct request_context *ctx)
-{
- switch (ctx->state) {
- case EZUSB_CTX_QUEUED:
- case EZUSB_CTX_REQ_SUBMITTED:
- case EZUSB_CTX_REQ_COMPLETE:
- case EZUSB_CTX_RESP_RECEIVED:
- wait_for_completion(&ctx->done);
- break;
- default:
- /* Done or failed - nothing to wait for */
- break;
- }
-}
-
-static void ezusb_req_ctx_wait_poll(struct ezusb_priv *upriv,
- struct request_context *ctx)
-{
- int msecs;
-
- switch (ctx->state) {
- case EZUSB_CTX_QUEUED:
- case EZUSB_CTX_REQ_SUBMITTED:
- case EZUSB_CTX_REQ_COMPLETE:
- case EZUSB_CTX_RESP_RECEIVED:
- /* If we get called from a timer or with our lock acquired, then
- * we can't wait for the completion and have to poll. This won't
- * happen if the USB controller completes the URB requests in
- * BH.
- */
- msecs = DEF_TIMEOUT * (1000 / HZ);
-
- while (!try_wait_for_completion(&ctx->done) && msecs--)
- udelay(1000);
- break;
- default:
- /* Done or failed - nothing to wait for */
- break;
- }
-}
-
-static void ezusb_req_ctx_wait_skip(struct ezusb_priv *upriv,
- struct request_context *ctx)
-{
- WARN(1, "Shouldn't be invoked for in_rid\n");
-}
-
-static inline u16 build_crc(struct ezusb_packet *data)
-{
- u16 crc = 0;
- u8 *bytes = (u8 *)data;
- int i;
-
- for (i = 0; i < 8; i++)
- crc = (crc << 1) + bytes[i];
-
- return crc;
-}
-
-/*
- * ezusb_fill_req:
- *
- * if data == NULL and length > 0 the data is assumed to be already in
- * the target buffer and only the header is filled.
- *
- */
-static int ezusb_fill_req(struct ezusb_packet *req, u16 length, u16 rid,
- const void *data, u16 frame_type, u8 reply_count)
-{
- int total_size = sizeof(*req) + length;
-
- BUG_ON(total_size > BULK_BUF_SIZE);
-
- req->magic = cpu_to_le16(EZUSB_MAGIC);
- req->req_reply_count = reply_count;
- req->ans_reply_count = 0;
- req->frame_type = cpu_to_le16(frame_type);
- req->size = cpu_to_le16(length + 4);
- req->crc = cpu_to_le16(build_crc(req));
- req->hermes_len = cpu_to_le16(HERMES_BYTES_TO_RECLEN(length));
- req->hermes_rid = cpu_to_le16(rid);
- if (data)
- memcpy(req->data, data, length);
- return total_size;
-}
-
-static int ezusb_submit_in_urb(struct ezusb_priv *upriv)
-{
- int retval = 0;
- void *cur_buf = upriv->read_urb->transfer_buffer;
-
- if (upriv->read_urb->status == -EINPROGRESS) {
- netdev_dbg(upriv->dev, "urb busy, not resubmiting\n");
- retval = -EBUSY;
- goto exit;
- }
- usb_fill_bulk_urb(upriv->read_urb, upriv->udev, upriv->read_pipe,
- cur_buf, BULK_BUF_SIZE,
- ezusb_bulk_in_callback, upriv);
- upriv->read_urb->transfer_flags = 0;
- retval = usb_submit_urb(upriv->read_urb, GFP_ATOMIC);
- if (retval)
- err("%s submit failed %d", __func__, retval);
-
- exit:
- return retval;
-}
-
-static inline int ezusb_8051_cpucs(struct ezusb_priv *upriv, int reset)
-{
- int ret;
- u8 *res_val = NULL;
-
- if (!upriv->udev) {
- err("%s: !upriv->udev", __func__);
- return -EFAULT;
- }
-
- res_val = kmalloc(sizeof(*res_val), GFP_KERNEL);
-
- if (!res_val)
- return -ENOMEM;
-
- *res_val = reset; /* avoid argument promotion */
-
- ret = usb_control_msg(upriv->udev,
- usb_sndctrlpipe(upriv->udev, 0),
- EZUSB_REQUEST_FW_TRANS,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE |
- USB_DIR_OUT, EZUSB_CPUCS_REG, 0, res_val,
- sizeof(*res_val), DEF_TIMEOUT);
-
- kfree(res_val);
-
- return ret;
-}
-
-static int ezusb_firmware_download(struct ezusb_priv *upriv,
- struct ez_usb_fw *fw)
-{
- u8 *fw_buffer;
- int retval, addr;
- int variant_offset;
-
- fw_buffer = kmalloc(FW_BUF_SIZE, GFP_KERNEL);
- if (!fw_buffer) {
- printk(KERN_ERR PFX "Out of memory for firmware buffer.\n");
- return -ENOMEM;
- }
- /*
- * This byte is 1 and should be replaced with 0. The offset is
- * 0x10AD in version 0.0.6. The byte in question should follow
- * the end of the code pointed to by the jump in the beginning
- * of the firmware. Also, it is read by code located at 0x358.
- */
- variant_offset = be16_to_cpup((__be16 *) &fw->code[FW_VAR_OFFSET_PTR]);
- if (variant_offset >= fw->size) {
- printk(KERN_ERR PFX "Invalid firmware variant offset: "
- "0x%04x\n", variant_offset);
- retval = -EINVAL;
- goto fail;
- }
-
- retval = ezusb_8051_cpucs(upriv, 1);
- if (retval < 0)
- goto fail;
- for (addr = 0; addr < fw->size; addr += FW_BUF_SIZE) {
- /* 0x100-0x300 should be left alone, it contains card
- * specific data, like USB enumeration information */
- if ((addr >= FW_HOLE_START) && (addr < FW_HOLE_END))
- continue;
-
- memcpy(fw_buffer, &fw->code[addr], FW_BUF_SIZE);
- if (variant_offset >= addr &&
- variant_offset < addr + FW_BUF_SIZE) {
- netdev_dbg(upriv->dev,
- "Patching card_variant byte at 0x%04X\n",
- variant_offset);
- fw_buffer[variant_offset - addr] = FW_VAR_VALUE;
- }
- retval = usb_control_msg(upriv->udev,
- usb_sndctrlpipe(upriv->udev, 0),
- EZUSB_REQUEST_FW_TRANS,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE
- | USB_DIR_OUT,
- addr, 0x0,
- fw_buffer, FW_BUF_SIZE,
- DEF_TIMEOUT);
-
- if (retval < 0)
- goto fail;
- }
- retval = ezusb_8051_cpucs(upriv, 0);
- if (retval < 0)
- goto fail;
-
- goto exit;
- fail:
- printk(KERN_ERR PFX "Firmware download failed, error %d\n",
- retval);
- exit:
- kfree(fw_buffer);
- return retval;
-}
-
-static int ezusb_access_ltv(struct ezusb_priv *upriv,
- struct request_context *ctx,
- u16 length, const void *data, u16 frame_type,
- void *ans_buff, unsigned ans_size, u16 *ans_length,
- ezusb_ctx_wait ezusb_ctx_wait_func)
-{
- int req_size;
- int retval = 0;
- enum ezusb_state state;
-
- if (!upriv->udev) {
- retval = -ENODEV;
- goto exit;
- }
-
- if (upriv->read_urb->status != -EINPROGRESS)
- err("%s: in urb not pending", __func__);
-
- /* protect upriv->reply_count, guarantee sequential numbers */
- spin_lock_bh(&upriv->reply_count_lock);
- req_size = ezusb_fill_req(ctx->buf, length, ctx->out_rid, data,
- frame_type, upriv->reply_count);
- usb_fill_bulk_urb(ctx->outurb, upriv->udev, upriv->write_pipe,
- ctx->buf, req_size,
- ezusb_request_out_callback, ctx);
-
- if (ctx->in_rid)
- upriv->reply_count = ezusb_reply_inc(upriv->reply_count);
-
- ezusb_req_enqueue_run(upriv, ctx);
-
- spin_unlock_bh(&upriv->reply_count_lock);
-
- if (ctx->in_rid)
- ezusb_ctx_wait_func(upriv, ctx);
-
- state = ctx->state;
- switch (state) {
- case EZUSB_CTX_COMPLETE:
- retval = ctx->outurb->status;
- break;
-
- case EZUSB_CTX_QUEUED:
- case EZUSB_CTX_REQ_SUBMITTED:
- if (!ctx->in_rid)
- break;
- fallthrough;
- default:
- err("%s: Unexpected context state %d", __func__,
- state);
- fallthrough;
- case EZUSB_CTX_REQ_TIMEOUT:
- case EZUSB_CTX_REQ_FAILED:
- case EZUSB_CTX_RESP_TIMEOUT:
- case EZUSB_CTX_REQSUBMIT_FAIL:
- printk(KERN_ERR PFX "Access failed, resetting (state %d,"
- " reply_count %d)\n", state, upriv->reply_count);
- upriv->reply_count = 0;
- if (state == EZUSB_CTX_REQ_TIMEOUT
- || state == EZUSB_CTX_RESP_TIMEOUT) {
- printk(KERN_ERR PFX "ctx timed out\n");
- retval = -ETIMEDOUT;
- } else {
- printk(KERN_ERR PFX "ctx failed\n");
- retval = -EFAULT;
- }
- goto exit;
- }
- if (ctx->in_rid) {
- struct ezusb_packet *ans = ctx->buf;
- unsigned exp_len;
-
- if (ans->hermes_len != 0)
- exp_len = le16_to_cpu(ans->hermes_len) * 2 + 12;
- else
- exp_len = 14;
-
- if (exp_len != ctx->buf_length) {
- err("%s: length mismatch for RID 0x%04x: "
- "expected %d, got %d", __func__,
- ctx->in_rid, exp_len, ctx->buf_length);
- retval = -EIO;
- goto exit;
- }
-
- if (ans_buff)
- memcpy(ans_buff, ans->data, min(exp_len, ans_size));
- if (ans_length)
- *ans_length = le16_to_cpu(ans->hermes_len);
- }
- exit:
- ezusb_request_context_put(ctx);
- return retval;
-}
-
-static int __ezusb_write_ltv(struct hermes *hw, int bap, u16 rid,
- u16 length, const void *data,
- ezusb_ctx_wait ezusb_ctx_wait_func)
-{
- struct ezusb_priv *upriv = hw->priv;
- u16 frame_type;
- struct request_context *ctx;
-
- if (length == 0)
- return -EINVAL;
-
- length = HERMES_RECLEN_TO_BYTES(length);
-
- /* On memory mapped devices HERMES_RID_CNFGROUPADDRESSES can be
- * set to be empty, but the USB bridge doesn't like it */
- if (length == 0)
- return 0;
-
- ctx = ezusb_alloc_ctx(upriv, rid, EZUSB_RID_ACK);
- if (!ctx)
- return -ENOMEM;
-
- if (rid == EZUSB_RID_TX)
- frame_type = EZUSB_FRAME_DATA;
- else
- frame_type = EZUSB_FRAME_CONTROL;
-
- return ezusb_access_ltv(upriv, ctx, length, data, frame_type,
- NULL, 0, NULL, ezusb_ctx_wait_func);
-}
-
-static int ezusb_write_ltv(struct hermes *hw, int bap, u16 rid,
- u16 length, const void *data)
-{
- return __ezusb_write_ltv(hw, bap, rid, length, data,
- ezusb_req_ctx_wait_poll);
-}
-
-static int __ezusb_read_ltv(struct hermes *hw, int bap, u16 rid,
- unsigned bufsize, u16 *length, void *buf,
- ezusb_ctx_wait ezusb_ctx_wait_func)
-
-{
- struct ezusb_priv *upriv = hw->priv;
- struct request_context *ctx;
-
- if (bufsize % 2)
- return -EINVAL;
-
- ctx = ezusb_alloc_ctx(upriv, rid, rid);
- if (!ctx)
- return -ENOMEM;
-
- return ezusb_access_ltv(upriv, ctx, 0, NULL, EZUSB_FRAME_CONTROL,
- buf, bufsize, length, ezusb_req_ctx_wait_poll);
-}
-
-static int ezusb_read_ltv(struct hermes *hw, int bap, u16 rid,
- unsigned bufsize, u16 *length, void *buf)
-{
- return __ezusb_read_ltv(hw, bap, rid, bufsize, length, buf,
- ezusb_req_ctx_wait_poll);
-}
-
-static int ezusb_read_ltv_preempt(struct hermes *hw, int bap, u16 rid,
- unsigned bufsize, u16 *length, void *buf)
-{
- return __ezusb_read_ltv(hw, bap, rid, bufsize, length, buf,
- ezusb_req_ctx_wait_compl);
-}
-
-static int ezusb_doicmd_wait(struct hermes *hw, u16 cmd, u16 parm0, u16 parm1,
- u16 parm2, struct hermes_response *resp)
-{
- WARN_ON_ONCE(1);
- return -EINVAL;
-}
-
-static int __ezusb_docmd_wait(struct hermes *hw, u16 cmd, u16 parm0,
- struct hermes_response *resp,
- ezusb_ctx_wait ezusb_ctx_wait_func)
-{
- struct ezusb_priv *upriv = hw->priv;
- struct request_context *ctx;
-
- __le16 data[4] = {
- cpu_to_le16(cmd),
- cpu_to_le16(parm0),
- 0,
- 0,
- };
- netdev_dbg(upriv->dev, "0x%04X, parm0 0x%04X\n", cmd, parm0);
- ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_DOCMD, EZUSB_RID_ACK);
- if (!ctx)
- return -ENOMEM;
-
- return ezusb_access_ltv(upriv, ctx, sizeof(data), &data,
- EZUSB_FRAME_CONTROL, NULL, 0, NULL,
- ezusb_ctx_wait_func);
-}
-
-static int ezusb_docmd_wait(struct hermes *hw, u16 cmd, u16 parm0,
- struct hermes_response *resp)
-{
- return __ezusb_docmd_wait(hw, cmd, parm0, resp, ezusb_req_ctx_wait_poll);
-}
-
-static int ezusb_bap_pread(struct hermes *hw, int bap,
- void *buf, int len, u16 id, u16 offset)
-{
- struct ezusb_priv *upriv = hw->priv;
- struct ezusb_packet *ans = (void *) upriv->read_urb->transfer_buffer;
- int actual_length = upriv->read_urb->actual_length;
-
- if (id == EZUSB_RID_RX) {
- if ((sizeof(*ans) + offset + len) > actual_length) {
- printk(KERN_ERR PFX "BAP read beyond buffer end "
- "in rx frame\n");
- return -EINVAL;
- }
- memcpy(buf, ans->data + offset, len);
- return 0;
- }
-
- if (EZUSB_IS_INFO(id)) {
- /* Include 4 bytes for length/type */
- if ((sizeof(*ans) + offset + len - 4) > actual_length) {
- printk(KERN_ERR PFX "BAP read beyond buffer end "
- "in info frame\n");
- return -EFAULT;
- }
- memcpy(buf, ans->data + offset - 4, len);
- } else {
- printk(KERN_ERR PFX "Unexpected fid 0x%04x\n", id);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int ezusb_read_pda(struct hermes *hw, __le16 *pda,
- u32 pda_addr, u16 pda_len)
-{
- struct ezusb_priv *upriv = hw->priv;
- struct request_context *ctx;
- __le16 data[] = {
- cpu_to_le16(pda_addr & 0xffff),
- cpu_to_le16(pda_len - 4)
- };
- ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_READ_PDA, EZUSB_RID_READ_PDA);
- if (!ctx)
- return -ENOMEM;
-
- /* wl_lkm does not include PDA size in the PDA area.
- * We will pad the information into pda, so other routines
- * don't have to be modified */
- pda[0] = cpu_to_le16(pda_len - 2);
- /* Includes CFG_PROD_DATA but not itself */
- pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */
-
- return ezusb_access_ltv(upriv, ctx, sizeof(data), &data,
- EZUSB_FRAME_CONTROL, &pda[2], pda_len - 4,
- NULL, ezusb_req_ctx_wait_compl);
-}
-
-static int ezusb_program_init(struct hermes *hw, u32 entry_point)
-{
- struct ezusb_priv *upriv = hw->priv;
- struct request_context *ctx;
- __le32 data = cpu_to_le32(entry_point);
-
- ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_INIT, EZUSB_RID_ACK);
- if (!ctx)
- return -ENOMEM;
-
- return ezusb_access_ltv(upriv, ctx, sizeof(data), &data,
- EZUSB_FRAME_CONTROL, NULL, 0, NULL,
- ezusb_req_ctx_wait_compl);
-}
-
-static int ezusb_program_end(struct hermes *hw)
-{
- struct ezusb_priv *upriv = hw->priv;
- struct request_context *ctx;
-
- ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_END, EZUSB_RID_ACK);
- if (!ctx)
- return -ENOMEM;
-
- return ezusb_access_ltv(upriv, ctx, 0, NULL,
- EZUSB_FRAME_CONTROL, NULL, 0, NULL,
- ezusb_req_ctx_wait_compl);
-}
-
-static int ezusb_program_bytes(struct hermes *hw, const char *buf,
- u32 addr, u32 len)
-{
- struct ezusb_priv *upriv = hw->priv;
- struct request_context *ctx;
- __le32 data = cpu_to_le32(addr);
- int err;
-
- ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_SET_ADDR, EZUSB_RID_ACK);
- if (!ctx)
- return -ENOMEM;
-
- err = ezusb_access_ltv(upriv, ctx, sizeof(data), &data,
- EZUSB_FRAME_CONTROL, NULL, 0, NULL,
- ezusb_req_ctx_wait_compl);
- if (err)
- return err;
-
- ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_BYTES, EZUSB_RID_ACK);
- if (!ctx)
- return -ENOMEM;
-
- return ezusb_access_ltv(upriv, ctx, len, buf,
- EZUSB_FRAME_CONTROL, NULL, 0, NULL,
- ezusb_req_ctx_wait_compl);
-}
-
-static int ezusb_program(struct hermes *hw, const char *buf,
- u32 addr, u32 len)
-{
- u32 ch_addr;
- u32 ch_len;
- int err = 0;
-
- /* We can only send 2048 bytes out of the bulk xmit at a time,
- * so we have to split any programming into chunks of <2048
- * bytes. */
-
- ch_len = (len < MAX_DL_SIZE) ? len : MAX_DL_SIZE;
- ch_addr = addr;
-
- while (ch_addr < (addr + len)) {
- pr_debug("Programming subblock of length %d "
- "to address 0x%08x. Data @ %p\n",
- ch_len, ch_addr, &buf[ch_addr - addr]);
-
- err = ezusb_program_bytes(hw, &buf[ch_addr - addr],
- ch_addr, ch_len);
- if (err)
- break;
-
- ch_addr += ch_len;
- ch_len = ((addr + len - ch_addr) < MAX_DL_SIZE) ?
- (addr + len - ch_addr) : MAX_DL_SIZE;
- }
-
- return err;
-}
-
-static netdev_tx_t ezusb_xmit(struct sk_buff *skb, struct net_device *dev)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- struct net_device_stats *stats = &dev->stats;
- struct ezusb_priv *upriv = priv->card;
- u8 mic[MICHAEL_MIC_LEN + 1];
- int err = 0;
- int tx_control;
- unsigned long flags;
- struct request_context *ctx;
- u8 *buf;
- int tx_size;
-
- if (!netif_running(dev)) {
- printk(KERN_ERR "%s: Tx on stopped device!\n",
- dev->name);
- return NETDEV_TX_BUSY;
- }
-
- if (netif_queue_stopped(dev)) {
- printk(KERN_DEBUG "%s: Tx while transmitter busy!\n",
- dev->name);
- return NETDEV_TX_BUSY;
- }
-
- if (orinoco_lock(priv, &flags) != 0) {
- printk(KERN_ERR
- "%s: ezusb_xmit() called while hw_unavailable\n",
- dev->name);
- return NETDEV_TX_BUSY;
- }
-
- if (!netif_carrier_ok(dev) ||
- (priv->iw_mode == NL80211_IFTYPE_MONITOR)) {
- /* Oops, the firmware hasn't established a connection,
- silently drop the packet (this seems to be the
- safest approach). */
- goto drop;
- }
-
- /* Check packet length */
- if (skb->len < ETH_HLEN)
- goto drop;
-
- tx_control = 0;
-
- err = orinoco_process_xmit_skb(skb, dev, priv, &tx_control,
- &mic[0]);
- if (err)
- goto drop;
-
- ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_TX, 0);
- if (!ctx)
- goto drop;
-
- memset(ctx->buf, 0, BULK_BUF_SIZE);
- buf = ctx->buf->data;
-
- {
- __le16 *tx_cntl = (__le16 *)buf;
- *tx_cntl = cpu_to_le16(tx_control);
- buf += sizeof(*tx_cntl);
- }
-
- memcpy(buf, skb->data, skb->len);
- buf += skb->len;
-
- if (tx_control & HERMES_TXCTRL_MIC) {
- u8 *m = mic;
- /* Mic has been offset so it can be copied to an even
- * address. We're copying eveything anyway, so we
- * don't need to copy that first byte. */
- if (skb->len % 2)
- m++;
- memcpy(buf, m, MICHAEL_MIC_LEN);
- buf += MICHAEL_MIC_LEN;
- }
-
- /* Finally, we actually initiate the send */
- netif_stop_queue(dev);
-
- /* The card may behave better if we send evenly sized usb transfers */
- tx_size = ALIGN(buf - ctx->buf->data, 2);
-
- err = ezusb_access_ltv(upriv, ctx, tx_size, NULL,
- EZUSB_FRAME_DATA, NULL, 0, NULL,
- ezusb_req_ctx_wait_skip);
-
- if (err) {
- netif_start_queue(dev);
- if (net_ratelimit())
- printk(KERN_ERR "%s: Error %d transmitting packet\n",
- dev->name, err);
- goto busy;
- }
-
- netif_trans_update(dev);
- stats->tx_bytes += skb->len;
- goto ok;
-
- drop:
- stats->tx_errors++;
- stats->tx_dropped++;
-
- ok:
- orinoco_unlock(priv, &flags);
- dev_kfree_skb(skb);
- return NETDEV_TX_OK;
-
- busy:
- orinoco_unlock(priv, &flags);
- return NETDEV_TX_BUSY;
-}
-
-static int ezusb_allocate(struct hermes *hw, u16 size, u16 *fid)
-{
- *fid = EZUSB_RID_TX;
- return 0;
-}
-
-
-static int ezusb_hard_reset(struct orinoco_private *priv)
-{
- struct ezusb_priv *upriv = priv->card;
- int retval = ezusb_8051_cpucs(upriv, 1);
-
- if (retval < 0) {
- err("Failed to reset");
- return retval;
- }
-
- retval = ezusb_8051_cpucs(upriv, 0);
- if (retval < 0) {
- err("Failed to unreset");
- return retval;
- }
-
- netdev_dbg(upriv->dev, "sending control message\n");
- retval = usb_control_msg(upriv->udev,
- usb_sndctrlpipe(upriv->udev, 0),
- EZUSB_REQUEST_TRIGGER,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE |
- USB_DIR_OUT, 0x0, 0x0, NULL, 0,
- DEF_TIMEOUT);
- if (retval < 0) {
- err("EZUSB_REQUEST_TRIGGER failed retval %d", retval);
- return retval;
- }
-#if 0
- dbg("Sending EZUSB_REQUEST_TRIG_AC");
- retval = usb_control_msg(upriv->udev,
- usb_sndctrlpipe(upriv->udev, 0),
- EZUSB_REQUEST_TRIG_AC,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE |
- USB_DIR_OUT, 0x00FA, 0x0, NULL, 0,
- DEF_TIMEOUT);
- if (retval < 0) {
- err("EZUSB_REQUEST_TRIG_AC failed retval %d", retval);
- return retval;
- }
-#endif
-
- return 0;
-}
-
-
-static int ezusb_init(struct hermes *hw)
-{
- struct ezusb_priv *upriv = hw->priv;
- int retval;
-
- if (!upriv)
- return -EINVAL;
-
- upriv->reply_count = 0;
- /* Write the MAGIC number on the simulated registers to keep
- * orinoco.c happy */
- hermes_write_regn(hw, SWSUPPORT0, HERMES_MAGIC);
- hermes_write_regn(hw, RXFID, EZUSB_RID_RX);
-
- usb_kill_urb(upriv->read_urb);
- ezusb_submit_in_urb(upriv);
-
- retval = __ezusb_write_ltv(hw, 0, EZUSB_RID_INIT1,
- HERMES_BYTES_TO_RECLEN(2), "\x10\x00",
- ezusb_req_ctx_wait_compl);
- if (retval < 0) {
- printk(KERN_ERR PFX "EZUSB_RID_INIT1 error %d\n", retval);
- return retval;
- }
-
- retval = __ezusb_docmd_wait(hw, HERMES_CMD_INIT, 0, NULL,
- ezusb_req_ctx_wait_compl);
- if (retval < 0) {
- printk(KERN_ERR PFX "HERMES_CMD_INIT error %d\n", retval);
- return retval;
- }
-
- return 0;
-}
-
-static void ezusb_bulk_in_callback(struct urb *urb)
-{
- struct ezusb_priv *upriv = (struct ezusb_priv *) urb->context;
- struct ezusb_packet *ans = urb->transfer_buffer;
- u16 crc;
- u16 hermes_rid;
-
- if (upriv->udev == NULL)
- return;
-
- if (urb->status == -ETIMEDOUT) {
- /* When a device gets unplugged we get this every time
- * we resubmit, flooding the logs. Since we don't use
- * USB timeouts, it shouldn't happen any other time*/
- pr_warn("%s: urb timed out, not resubmitting\n", __func__);
- return;
- }
- if (urb->status == -ECONNABORTED) {
- pr_warn("%s: connection abort, resubmitting urb\n",
- __func__);
- goto resubmit;
- }
- if ((urb->status == -EILSEQ)
- || (urb->status == -ENOENT)
- || (urb->status == -ECONNRESET)) {
- netdev_dbg(upriv->dev, "status %d, not resubmiting\n",
- urb->status);
- return;
- }
- if (urb->status)
- netdev_dbg(upriv->dev, "status: %d length: %d\n",
- urb->status, urb->actual_length);
- if (urb->actual_length < sizeof(*ans)) {
- err("%s: short read, ignoring", __func__);
- goto resubmit;
- }
- crc = build_crc(ans);
- if (le16_to_cpu(ans->crc) != crc) {
- err("CRC error, ignoring packet");
- goto resubmit;
- }
-
- hermes_rid = le16_to_cpu(ans->hermes_rid);
- if ((hermes_rid != EZUSB_RID_RX) && !EZUSB_IS_INFO(hermes_rid)) {
- ezusb_request_in_callback(upriv, urb);
- } else if (upriv->dev) {
- struct net_device *dev = upriv->dev;
- struct orinoco_private *priv = ndev_priv(dev);
- struct hermes *hw = &priv->hw;
-
- if (hermes_rid == EZUSB_RID_RX) {
- __orinoco_ev_rx(dev, hw);
- } else {
- hermes_write_regn(hw, INFOFID,
- le16_to_cpu(ans->hermes_rid));
- __orinoco_ev_info(dev, hw);
- }
- }
-
- resubmit:
- if (upriv->udev)
- ezusb_submit_in_urb(upriv);
-}
-
-static inline void ezusb_delete(struct ezusb_priv *upriv)
-{
- struct list_head *item;
- struct list_head *tmp_item;
- unsigned long flags;
-
- BUG_ON(!upriv);
-
- mutex_lock(&upriv->mtx);
-
- upriv->udev = NULL; /* No timer will be rearmed from here */
-
- usb_kill_urb(upriv->read_urb);
-
- spin_lock_irqsave(&upriv->req_lock, flags);
- list_for_each_safe(item, tmp_item, &upriv->req_active) {
- struct request_context *ctx;
- int err;
-
- ctx = list_entry(item, struct request_context, list);
- refcount_inc(&ctx->refcount);
-
- ctx->outurb->transfer_flags |= URB_ASYNC_UNLINK;
- err = usb_unlink_urb(ctx->outurb);
-
- spin_unlock_irqrestore(&upriv->req_lock, flags);
- if (err == -EINPROGRESS)
- wait_for_completion(&ctx->done);
-
- del_timer_sync(&ctx->timer);
- /* FIXME: there is an slight chance for the irq handler to
- * be running */
- if (!list_empty(&ctx->list))
- ezusb_ctx_complete(ctx);
-
- ezusb_request_context_put(ctx);
- spin_lock_irqsave(&upriv->req_lock, flags);
- }
- spin_unlock_irqrestore(&upriv->req_lock, flags);
-
- list_for_each_safe(item, tmp_item, &upriv->req_pending)
- ezusb_ctx_complete(list_entry(item,
- struct request_context, list));
-
- if (upriv->read_urb && upriv->read_urb->status == -EINPROGRESS)
- printk(KERN_ERR PFX "Some URB in progress\n");
-
- mutex_unlock(&upriv->mtx);
-
- if (upriv->read_urb) {
- kfree(upriv->read_urb->transfer_buffer);
- usb_free_urb(upriv->read_urb);
- }
- kfree(upriv->bap_buf);
- if (upriv->dev) {
- struct orinoco_private *priv = ndev_priv(upriv->dev);
- orinoco_if_del(priv);
- wiphy_unregister(priv_to_wiphy(upriv));
- free_orinocodev(priv);
- }
-}
-
-static void ezusb_lock_irqsave(spinlock_t *lock,
- unsigned long *flags) __acquires(lock)
-{
- spin_lock_bh(lock);
-}
-
-static void ezusb_unlock_irqrestore(spinlock_t *lock,
- unsigned long *flags) __releases(lock)
-{
- spin_unlock_bh(lock);
-}
-
-static void ezusb_lock_irq(spinlock_t *lock) __acquires(lock)
-{
- spin_lock_bh(lock);
-}
-
-static void ezusb_unlock_irq(spinlock_t *lock) __releases(lock)
-{
- spin_unlock_bh(lock);
-}
-
-static const struct hermes_ops ezusb_ops = {
- .init = ezusb_init,
- .cmd_wait = ezusb_docmd_wait,
- .init_cmd_wait = ezusb_doicmd_wait,
- .allocate = ezusb_allocate,
- .read_ltv = ezusb_read_ltv,
- .read_ltv_pr = ezusb_read_ltv_preempt,
- .write_ltv = ezusb_write_ltv,
- .bap_pread = ezusb_bap_pread,
- .read_pda = ezusb_read_pda,
- .program_init = ezusb_program_init,
- .program_end = ezusb_program_end,
- .program = ezusb_program,
- .lock_irqsave = ezusb_lock_irqsave,
- .unlock_irqrestore = ezusb_unlock_irqrestore,
- .lock_irq = ezusb_lock_irq,
- .unlock_irq = ezusb_unlock_irq,
-};
-
-static const struct net_device_ops ezusb_netdev_ops = {
- .ndo_open = orinoco_open,
- .ndo_stop = orinoco_stop,
- .ndo_start_xmit = ezusb_xmit,
- .ndo_set_rx_mode = orinoco_set_multicast_list,
- .ndo_change_mtu = orinoco_change_mtu,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_tx_timeout = orinoco_tx_timeout,
-};
-
-static int ezusb_probe(struct usb_interface *interface,
- const struct usb_device_id *id)
-{
- struct usb_device *udev = interface_to_usbdev(interface);
- struct orinoco_private *priv;
- struct hermes *hw;
- struct ezusb_priv *upriv = NULL;
- struct usb_interface_descriptor *iface_desc;
- struct usb_endpoint_descriptor *ep;
- const struct firmware *fw_entry = NULL;
- int retval = 0;
- int i;
-
- priv = alloc_orinocodev(sizeof(*upriv), &udev->dev,
- ezusb_hard_reset, NULL);
- if (!priv) {
- err("Couldn't allocate orinocodev");
- retval = -ENOMEM;
- goto exit;
- }
-
- hw = &priv->hw;
-
- upriv = priv->card;
-
- mutex_init(&upriv->mtx);
- spin_lock_init(&upriv->reply_count_lock);
-
- spin_lock_init(&upriv->req_lock);
- INIT_LIST_HEAD(&upriv->req_pending);
- INIT_LIST_HEAD(&upriv->req_active);
-
- upriv->udev = udev;
-
- hw->iobase = (void __force __iomem *) &upriv->hermes_reg_fake;
- hw->reg_spacing = HERMES_16BIT_REGSPACING;
- hw->priv = upriv;
- hw->ops = &ezusb_ops;
-
- /* set up the endpoint information */
- /* check out the endpoints */
-
- iface_desc = &interface->cur_altsetting->desc;
- for (i = 0; i < iface_desc->bNumEndpoints; ++i) {
- ep = &interface->cur_altsetting->endpoint[i].desc;
-
- if (usb_endpoint_is_bulk_in(ep)) {
- /* we found a bulk in endpoint */
- if (upriv->read_urb != NULL) {
- pr_warn("Found a second bulk in ep, ignored\n");
- continue;
- }
-
- upriv->read_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!upriv->read_urb)
- goto error;
- if (le16_to_cpu(ep->wMaxPacketSize) != 64)
- pr_warn("bulk in: wMaxPacketSize!= 64\n");
- if (ep->bEndpointAddress != (2 | USB_DIR_IN))
- pr_warn("bulk in: bEndpointAddress: %d\n",
- ep->bEndpointAddress);
- upriv->read_pipe = usb_rcvbulkpipe(udev,
- ep->
- bEndpointAddress);
- upriv->read_urb->transfer_buffer =
- kmalloc(BULK_BUF_SIZE, GFP_KERNEL);
- if (!upriv->read_urb->transfer_buffer) {
- err("Couldn't allocate IN buffer");
- goto error;
- }
- }
-
- if (usb_endpoint_is_bulk_out(ep)) {
- /* we found a bulk out endpoint */
- if (upriv->bap_buf != NULL) {
- pr_warn("Found a second bulk out ep, ignored\n");
- continue;
- }
-
- if (le16_to_cpu(ep->wMaxPacketSize) != 64)
- pr_warn("bulk out: wMaxPacketSize != 64\n");
- if (ep->bEndpointAddress != 2)
- pr_warn("bulk out: bEndpointAddress: %d\n",
- ep->bEndpointAddress);
- upriv->write_pipe = usb_sndbulkpipe(udev,
- ep->
- bEndpointAddress);
- upriv->bap_buf = kmalloc(BULK_BUF_SIZE, GFP_KERNEL);
- if (!upriv->bap_buf) {
- err("Couldn't allocate bulk_out_buffer");
- goto error;
- }
- }
- }
- if (!upriv->bap_buf || !upriv->read_urb) {
- err("Didn't find the required bulk endpoints");
- goto error;
- }
-
- if (request_firmware(&fw_entry, "orinoco_ezusb_fw",
- &interface->dev) == 0) {
- firmware.size = fw_entry->size;
- firmware.code = fw_entry->data;
- }
- if (firmware.size && firmware.code) {
- if (ezusb_firmware_download(upriv, &firmware) < 0)
- goto error;
- } else {
- err("No firmware to download");
- goto error;
- }
-
- if (ezusb_hard_reset(priv) < 0) {
- err("Cannot reset the device");
- goto error;
- }
-
- /* If the firmware is already downloaded orinoco.c will call
- * ezusb_init but if the firmware is not already there, that will make
- * the kernel very unstable, so we try initializing here and quit in
- * case of error */
- if (ezusb_init(hw) < 0) {
- err("Couldn't initialize the device");
- err("Firmware may not be downloaded or may be wrong.");
- goto error;
- }
-
- /* Initialise the main driver */
- if (orinoco_init(priv) != 0) {
- err("orinoco_init() failed\n");
- goto error;
- }
-
- if (orinoco_if_add(priv, 0, 0, &ezusb_netdev_ops) != 0) {
- upriv->dev = NULL;
- err("%s: orinoco_if_add() failed", __func__);
- wiphy_unregister(priv_to_wiphy(priv));
- goto error;
- }
- upriv->dev = priv->ndev;
-
- goto exit;
-
- error:
- ezusb_delete(upriv);
- if (upriv->dev) {
- /* upriv->dev was 0, so ezusb_delete() didn't free it */
- free_orinocodev(priv);
- }
- upriv = NULL;
- retval = -EFAULT;
- exit:
- if (fw_entry) {
- firmware.code = NULL;
- firmware.size = 0;
- release_firmware(fw_entry);
- }
- usb_set_intfdata(interface, upriv);
- return retval;
-}
-
-
-static void ezusb_disconnect(struct usb_interface *intf)
-{
- struct ezusb_priv *upriv = usb_get_intfdata(intf);
- usb_set_intfdata(intf, NULL);
- ezusb_delete(upriv);
- printk(KERN_INFO PFX "Disconnected\n");
-}
-
-
-/* usb specific object needed to register this driver with the usb subsystem */
-static struct usb_driver orinoco_driver = {
- .name = DRIVER_NAME,
- .probe = ezusb_probe,
- .disconnect = ezusb_disconnect,
- .id_table = ezusb_table,
- .disable_hub_initiated_lpm = 1,
-};
-
-module_usb_driver(orinoco_driver);
-
-MODULE_AUTHOR("Manuel Estrada Sainz");
-MODULE_DESCRIPTION("Driver for Orinoco wireless LAN cards using EZUSB bridge");
-MODULE_LICENSE("Dual MPL/GPL");
diff --git a/drivers/net/wireless/intersil/orinoco/scan.c b/drivers/net/wireless/intersil/orinoco/scan.c
deleted file mode 100644
index 6d1d084854fb..000000000000
--- a/drivers/net/wireless/intersil/orinoco/scan.c
+++ /dev/null
@@ -1,259 +0,0 @@
-/* Helpers for managing scan queues
- *
- * See copyright notice in main.c
- */
-
-#include <linux/gfp.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/ieee80211.h>
-#include <net/cfg80211.h>
-
-#include "hermes.h"
-#include "orinoco.h"
-#include "main.h"
-
-#include "scan.h"
-
-#define ZERO_DBM_OFFSET 0x95
-#define MAX_SIGNAL_LEVEL 0x8A
-#define MIN_SIGNAL_LEVEL 0x2F
-
-#define SIGNAL_TO_DBM(x) \
- (clamp_t(s32, (x), MIN_SIGNAL_LEVEL, MAX_SIGNAL_LEVEL) \
- - ZERO_DBM_OFFSET)
-#define SIGNAL_TO_MBM(x) (SIGNAL_TO_DBM(x) * 100)
-
-static int symbol_build_supp_rates(u8 *buf, const __le16 *rates)
-{
- int i;
- u8 rate;
-
- buf[0] = WLAN_EID_SUPP_RATES;
- for (i = 0; i < 5; i++) {
- rate = le16_to_cpu(rates[i]);
- /* NULL terminated */
- if (rate == 0x0)
- break;
- buf[i + 2] = rate;
- }
- buf[1] = i;
-
- return i + 2;
-}
-
-static int prism_build_supp_rates(u8 *buf, const u8 *rates)
-{
- int i;
-
- buf[0] = WLAN_EID_SUPP_RATES;
- for (i = 0; i < 8; i++) {
- /* NULL terminated */
- if (rates[i] == 0x0)
- break;
- buf[i + 2] = rates[i];
- }
- buf[1] = i;
-
- /* We might still have another 2 rates, which need to go in
- * extended supported rates */
- if (i == 8 && rates[i] > 0) {
- buf[10] = WLAN_EID_EXT_SUPP_RATES;
- for (; i < 10; i++) {
- /* NULL terminated */
- if (rates[i] == 0x0)
- break;
- buf[i + 2] = rates[i];
- }
- buf[11] = i - 8;
- }
-
- return (i < 8) ? i + 2 : i + 4;
-}
-
-static void orinoco_add_hostscan_result(struct orinoco_private *priv,
- const union hermes_scan_info *bss)
-{
- struct wiphy *wiphy = priv_to_wiphy(priv);
- struct ieee80211_channel *channel;
- struct cfg80211_bss *cbss;
- u8 *ie;
- u8 ie_buf[46];
- u64 timestamp;
- s32 signal;
- u16 capability;
- u16 beacon_interval;
- int ie_len;
- int freq;
- int len;
-
- len = le16_to_cpu(bss->a.essid_len);
-
- /* Reconstruct SSID and bitrate IEs to pass up */
- ie_buf[0] = WLAN_EID_SSID;
- ie_buf[1] = len;
- memcpy(&ie_buf[2], bss->a.essid, len);
-
- ie = ie_buf + len + 2;
- ie_len = ie_buf[1] + 2;
- switch (priv->firmware_type) {
- case FIRMWARE_TYPE_SYMBOL:
- ie_len += symbol_build_supp_rates(ie, bss->s.rates);
- break;
-
- case FIRMWARE_TYPE_INTERSIL:
- ie_len += prism_build_supp_rates(ie, bss->p.rates);
- break;
-
- case FIRMWARE_TYPE_AGERE:
- default:
- break;
- }
-
- freq = ieee80211_channel_to_frequency(
- le16_to_cpu(bss->a.channel), NL80211_BAND_2GHZ);
- channel = ieee80211_get_channel(wiphy, freq);
- if (!channel) {
- printk(KERN_DEBUG "Invalid channel designation %04X(%04X)",
- bss->a.channel, freq);
- return; /* Then ignore it for now */
- }
- timestamp = 0;
- capability = le16_to_cpu(bss->a.capabilities);
- beacon_interval = le16_to_cpu(bss->a.beacon_interv);
- signal = SIGNAL_TO_MBM(le16_to_cpu(bss->a.level));
-
- cbss = cfg80211_inform_bss(wiphy, channel, CFG80211_BSS_FTYPE_UNKNOWN,
- bss->a.bssid, timestamp, capability,
- beacon_interval, ie_buf, ie_len, signal,
- GFP_KERNEL);
- cfg80211_put_bss(wiphy, cbss);
-}
-
-void orinoco_add_extscan_result(struct orinoco_private *priv,
- struct agere_ext_scan_info *bss,
- size_t len)
-{
- struct wiphy *wiphy = priv_to_wiphy(priv);
- struct ieee80211_channel *channel;
- struct cfg80211_bss *cbss;
- const u8 *ie;
- u64 timestamp;
- s32 signal;
- u16 capability;
- u16 beacon_interval;
- size_t ie_len;
- int chan, freq;
-
- ie_len = len - sizeof(*bss);
- ie = cfg80211_find_ie(WLAN_EID_DS_PARAMS, bss->data, ie_len);
- chan = ie ? ie[2] : 0;
- freq = ieee80211_channel_to_frequency(chan, NL80211_BAND_2GHZ);
- channel = ieee80211_get_channel(wiphy, freq);
-
- timestamp = le64_to_cpu(bss->timestamp);
- capability = le16_to_cpu(bss->capabilities);
- beacon_interval = le16_to_cpu(bss->beacon_interval);
- ie = bss->data;
- signal = SIGNAL_TO_MBM(bss->level);
-
- cbss = cfg80211_inform_bss(wiphy, channel, CFG80211_BSS_FTYPE_UNKNOWN,
- bss->bssid, timestamp, capability,
- beacon_interval, ie, ie_len, signal,
- GFP_KERNEL);
- cfg80211_put_bss(wiphy, cbss);
-}
-
-void orinoco_add_hostscan_results(struct orinoco_private *priv,
- unsigned char *buf,
- size_t len)
-{
- int offset; /* In the scan data */
- size_t atom_len;
- bool abort = false;
-
- switch (priv->firmware_type) {
- case FIRMWARE_TYPE_AGERE:
- atom_len = sizeof(struct agere_scan_apinfo);
- offset = 0;
- break;
-
- case FIRMWARE_TYPE_SYMBOL:
- /* Lack of documentation necessitates this hack.
- * Different firmwares have 68 or 76 byte long atoms.
- * We try modulo first. If the length divides by both,
- * we check what would be the channel in the second
- * frame for a 68-byte atom. 76-byte atoms have 0 there.
- * Valid channel cannot be 0. */
- if (len % 76)
- atom_len = 68;
- else if (len % 68)
- atom_len = 76;
- else if (len >= 1292 && buf[68] == 0)
- atom_len = 76;
- else
- atom_len = 68;
- offset = 0;
- break;
-
- case FIRMWARE_TYPE_INTERSIL:
- offset = 4;
- if (priv->has_hostscan) {
- atom_len = le16_to_cpup((__le16 *)buf);
- /* Sanity check for atom_len */
- if (atom_len < sizeof(struct prism2_scan_apinfo)) {
- printk(KERN_ERR "%s: Invalid atom_len in scan "
- "data: %zu\n", priv->ndev->name,
- atom_len);
- abort = true;
- goto scan_abort;
- }
- } else
- atom_len = offsetof(struct prism2_scan_apinfo, atim);
- break;
-
- default:
- abort = true;
- goto scan_abort;
- }
-
- /* Check that we got an whole number of atoms */
- if ((len - offset) % atom_len) {
- printk(KERN_ERR "%s: Unexpected scan data length %zu, "
- "atom_len %zu, offset %d\n", priv->ndev->name, len,
- atom_len, offset);
- abort = true;
- goto scan_abort;
- }
-
- /* Process the entries one by one */
- for (; offset + atom_len <= len; offset += atom_len) {
- union hermes_scan_info *atom;
-
- atom = (union hermes_scan_info *) (buf + offset);
-
- orinoco_add_hostscan_result(priv, atom);
- }
-
- scan_abort:
- if (priv->scan_request) {
- struct cfg80211_scan_info info = {
- .aborted = abort,
- };
-
- cfg80211_scan_done(priv->scan_request, &info);
- priv->scan_request = NULL;
- }
-}
-
-void orinoco_scan_done(struct orinoco_private *priv, bool abort)
-{
- if (priv->scan_request) {
- struct cfg80211_scan_info info = {
- .aborted = abort,
- };
-
- cfg80211_scan_done(priv->scan_request, &info);
- priv->scan_request = NULL;
- }
-}
diff --git a/drivers/net/wireless/intersil/orinoco/scan.h b/drivers/net/wireless/intersil/orinoco/scan.h
deleted file mode 100644
index 27281fb0a6dc..000000000000
--- a/drivers/net/wireless/intersil/orinoco/scan.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* Helpers for managing scan queues
- *
- * See copyright notice in main.c
- */
-#ifndef _ORINOCO_SCAN_H_
-#define _ORINOCO_SCAN_H_
-
-/* Forward declarations */
-struct orinoco_private;
-struct agere_ext_scan_info;
-
-/* Add scan results */
-void orinoco_add_extscan_result(struct orinoco_private *priv,
- struct agere_ext_scan_info *atom,
- size_t len);
-void orinoco_add_hostscan_results(struct orinoco_private *dev,
- unsigned char *buf,
- size_t len);
-void orinoco_scan_done(struct orinoco_private *priv, bool abort);
-
-#endif /* _ORINOCO_SCAN_H_ */
diff --git a/drivers/net/wireless/intersil/orinoco/spectrum_cs.c b/drivers/net/wireless/intersil/orinoco/spectrum_cs.c
deleted file mode 100644
index 841d623c621a..000000000000
--- a/drivers/net/wireless/intersil/orinoco/spectrum_cs.c
+++ /dev/null
@@ -1,328 +0,0 @@
-/*
- * Driver for 802.11b cards using RAM-loadable Symbol firmware, such as
- * Symbol Wireless Networker LA4137, CompactFlash cards by Socket
- * Communications and Intel PRO/Wireless 2011B.
- *
- * The driver implements Symbol firmware download. The rest is handled
- * in hermes.c and main.c.
- *
- * Utilities for downloading the Symbol firmware are available at
- * http://sourceforge.net/projects/orinoco/
- *
- * Copyright (C) 2002-2005 Pavel Roskin <proski@gnu.org>
- * Portions based on orinoco_cs.c:
- * Copyright (C) David Gibson, Linuxcare Australia
- * Portions based on Spectrum24tDnld.c from original spectrum24 driver:
- * Copyright (C) Symbol Technologies.
- *
- * See copyright notice in file main.c.
- */
-
-#define DRIVER_NAME "spectrum_cs"
-#define PFX DRIVER_NAME ": "
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <pcmcia/cistpl.h>
-#include <pcmcia/cisreg.h>
-#include <pcmcia/ds.h>
-
-#include "orinoco.h"
-
-/********************************************************************/
-/* Module stuff */
-/********************************************************************/
-
-MODULE_AUTHOR("Pavel Roskin <proski@gnu.org>");
-MODULE_DESCRIPTION("Driver for Symbol Spectrum24 Trilogy cards with firmware downloader");
-MODULE_LICENSE("Dual MPL/GPL");
-
-/* Module parameters */
-
-/* Some D-Link cards have buggy CIS. They do work at 5v properly, but
- * don't have any CIS entry for it. This workaround it... */
-static int ignore_cis_vcc; /* = 0 */
-module_param(ignore_cis_vcc, int, 0);
-MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket");
-
-/********************************************************************/
-/* Data structures */
-/********************************************************************/
-
-/* PCMCIA specific device information (goes in the card field of
- * struct orinoco_private */
-struct orinoco_pccard {
- struct pcmcia_device *p_dev;
-};
-
-/********************************************************************/
-/* Function prototypes */
-/********************************************************************/
-
-static int spectrum_cs_config(struct pcmcia_device *link);
-static void spectrum_cs_release(struct pcmcia_device *link);
-
-/* Constants for the CISREG_CCSR register */
-#define HCR_RUN 0x07 /* run firmware after reset */
-#define HCR_IDLE 0x0E /* don't run firmware after reset */
-#define HCR_MEM16 0x10 /* memory width bit, should be preserved */
-
-
-/*
- * Reset the card using configuration registers COR and CCSR.
- * If IDLE is 1, stop the firmware, so that it can be safely rewritten.
- */
-static int
-spectrum_reset(struct pcmcia_device *link, int idle)
-{
- int ret;
- u8 save_cor;
- u8 ccsr;
-
- /* Doing it if hardware is gone is guaranteed crash */
- if (!pcmcia_dev_present(link))
- return -ENODEV;
-
- /* Save original COR value */
- ret = pcmcia_read_config_byte(link, CISREG_COR, &save_cor);
- if (ret)
- goto failed;
-
- /* Soft-Reset card */
- ret = pcmcia_write_config_byte(link, CISREG_COR,
- (save_cor | COR_SOFT_RESET));
- if (ret)
- goto failed;
- udelay(1000);
-
- /* Read CCSR */
- ret = pcmcia_read_config_byte(link, CISREG_CCSR, &ccsr);
- if (ret)
- goto failed;
-
- /*
- * Start or stop the firmware. Memory width bit should be
- * preserved from the value we've just read.
- */
- ccsr = (idle ? HCR_IDLE : HCR_RUN) | (ccsr & HCR_MEM16);
- ret = pcmcia_write_config_byte(link, CISREG_CCSR, ccsr);
- if (ret)
- goto failed;
- udelay(1000);
-
- /* Restore original COR configuration index */
- ret = pcmcia_write_config_byte(link, CISREG_COR,
- (save_cor & ~COR_SOFT_RESET));
- if (ret)
- goto failed;
- udelay(1000);
- return 0;
-
-failed:
- return -ENODEV;
-}
-
-/********************************************************************/
-/* Device methods */
-/********************************************************************/
-
-static int
-spectrum_cs_hard_reset(struct orinoco_private *priv)
-{
- struct orinoco_pccard *card = priv->card;
- struct pcmcia_device *link = card->p_dev;
-
- /* Soft reset using COR and HCR */
- spectrum_reset(link, 0);
-
- return 0;
-}
-
-static int
-spectrum_cs_stop_firmware(struct orinoco_private *priv, int idle)
-{
- struct orinoco_pccard *card = priv->card;
- struct pcmcia_device *link = card->p_dev;
-
- return spectrum_reset(link, idle);
-}
-
-/********************************************************************/
-/* PCMCIA stuff */
-/********************************************************************/
-
-static int
-spectrum_cs_probe(struct pcmcia_device *link)
-{
- struct orinoco_private *priv;
- struct orinoco_pccard *card;
- int ret;
-
- priv = alloc_orinocodev(sizeof(*card), &link->dev,
- spectrum_cs_hard_reset,
- spectrum_cs_stop_firmware);
- if (!priv)
- return -ENOMEM;
- card = priv->card;
-
- /* Link both structures together */
- card->p_dev = link;
- link->priv = priv;
-
- ret = spectrum_cs_config(link);
- if (ret)
- goto err_free_orinocodev;
-
- return 0;
-
-err_free_orinocodev:
- free_orinocodev(priv);
- return ret;
-}
-
-static void spectrum_cs_detach(struct pcmcia_device *link)
-{
- struct orinoco_private *priv = link->priv;
-
- orinoco_if_del(priv);
-
- spectrum_cs_release(link);
-
- free_orinocodev(priv);
-} /* spectrum_cs_detach */
-
-static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
- void *priv_data)
-{
- if (p_dev->config_index == 0)
- return -EINVAL;
-
- return pcmcia_request_io(p_dev);
-};
-
-static int
-spectrum_cs_config(struct pcmcia_device *link)
-{
- struct orinoco_private *priv = link->priv;
- struct hermes *hw = &priv->hw;
- int ret;
- void __iomem *mem;
-
- link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC |
- CONF_AUTO_SET_IO | CONF_ENABLE_IRQ;
- if (ignore_cis_vcc)
- link->config_flags &= ~CONF_AUTO_CHECK_VCC;
- ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL);
- if (ret) {
- if (!ignore_cis_vcc)
- printk(KERN_ERR PFX "GetNextTuple(): No matching "
- "CIS configuration. Maybe you need the "
- "ignore_cis_vcc=1 parameter.\n");
- goto failed;
- }
-
- mem = ioport_map(link->resource[0]->start,
- resource_size(link->resource[0]));
- if (!mem)
- goto failed;
-
- /* We initialize the hermes structure before completing PCMCIA
- * configuration just in case the interrupt handler gets
- * called. */
- hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
- hw->eeprom_pda = true;
-
- ret = pcmcia_request_irq(link, orinoco_interrupt);
- if (ret)
- goto failed;
-
- ret = pcmcia_enable_device(link);
- if (ret)
- goto failed;
-
- /* Reset card */
- if (spectrum_cs_hard_reset(priv) != 0)
- goto failed;
-
- /* Initialise the main driver */
- if (orinoco_init(priv) != 0) {
- printk(KERN_ERR PFX "orinoco_init() failed\n");
- goto failed;
- }
-
- /* Register an interface with the stack */
- if (orinoco_if_add(priv, link->resource[0]->start,
- link->irq, NULL) != 0) {
- printk(KERN_ERR PFX "orinoco_if_add() failed\n");
- goto failed;
- }
-
- return 0;
-
- failed:
- spectrum_cs_release(link);
- return -ENODEV;
-} /* spectrum_cs_config */
-
-static void
-spectrum_cs_release(struct pcmcia_device *link)
-{
- struct orinoco_private *priv = link->priv;
- unsigned long flags;
-
- /* We're committed to taking the device away now, so mark the
- * hardware as unavailable */
- priv->hw.ops->lock_irqsave(&priv->lock, &flags);
- priv->hw_unavailable++;
- priv->hw.ops->unlock_irqrestore(&priv->lock, &flags);
-
- pcmcia_disable_device(link);
- if (priv->hw.iobase)
- ioport_unmap(priv->hw.iobase);
-} /* spectrum_cs_release */
-
-
-static int
-spectrum_cs_suspend(struct pcmcia_device *link)
-{
- struct orinoco_private *priv = link->priv;
-
- /* Mark the device as stopped, to block IO until later */
- orinoco_down(priv);
-
- return 0;
-}
-
-static int
-spectrum_cs_resume(struct pcmcia_device *link)
-{
- struct orinoco_private *priv = link->priv;
- int err = orinoco_up(priv);
-
- return err;
-}
-
-
-/********************************************************************/
-/* Module initialization */
-/********************************************************************/
-
-static const struct pcmcia_device_id spectrum_cs_ids[] = {
- PCMCIA_DEVICE_MANF_CARD(0x026c, 0x0001), /* Symbol Spectrum24 LA4137 */
- PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0001), /* Socket Communications CF */
- PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless LAN PC Card", 0x816cc815, 0x6fbf459a), /* 2011B, not 2011 */
- PCMCIA_DEVICE_NULL,
-};
-MODULE_DEVICE_TABLE(pcmcia, spectrum_cs_ids);
-
-static struct pcmcia_driver orinoco_driver = {
- .owner = THIS_MODULE,
- .name = DRIVER_NAME,
- .probe = spectrum_cs_probe,
- .remove = spectrum_cs_detach,
- .suspend = spectrum_cs_suspend,
- .resume = spectrum_cs_resume,
- .id_table = spectrum_cs_ids,
-};
-module_pcmcia_driver(orinoco_driver);
diff --git a/drivers/net/wireless/intersil/orinoco/wext.c b/drivers/net/wireless/intersil/orinoco/wext.c
deleted file mode 100644
index dea1ff044342..000000000000
--- a/drivers/net/wireless/intersil/orinoco/wext.c
+++ /dev/null
@@ -1,1428 +0,0 @@
-/* Wireless extensions support.
- *
- * See copyright notice in main.c
- */
-#include <linux/slab.h>
-#include <linux/kernel.h>
-#include <linux/if_arp.h>
-#include <linux/wireless.h>
-#include <linux/ieee80211.h>
-#include <linux/etherdevice.h>
-#include <net/iw_handler.h>
-#include <net/cfg80211.h>
-#include <net/cfg80211-wext.h>
-
-#include "hermes.h"
-#include "hermes_rid.h"
-#include "orinoco.h"
-
-#include "hw.h"
-#include "mic.h"
-#include "scan.h"
-#include "main.h"
-
-#include "wext.h"
-
-#define MAX_RID_LEN 1024
-
-/* Helper routine to record keys
- * It is called under orinoco_lock so it may not sleep */
-static int orinoco_set_key(struct orinoco_private *priv, int index,
- enum orinoco_alg alg, const u8 *key, int key_len,
- const u8 *seq, int seq_len)
-{
- kfree_sensitive(priv->keys[index].key);
- kfree_sensitive(priv->keys[index].seq);
-
- if (key_len) {
- priv->keys[index].key = kzalloc(key_len, GFP_ATOMIC);
- if (!priv->keys[index].key)
- goto nomem;
- } else
- priv->keys[index].key = NULL;
-
- if (seq_len) {
- priv->keys[index].seq = kzalloc(seq_len, GFP_ATOMIC);
- if (!priv->keys[index].seq)
- goto free_key;
- } else
- priv->keys[index].seq = NULL;
-
- priv->keys[index].key_len = key_len;
- priv->keys[index].seq_len = seq_len;
-
- if (key_len)
- memcpy((void *)priv->keys[index].key, key, key_len);
- if (seq_len)
- memcpy((void *)priv->keys[index].seq, seq, seq_len);
-
- switch (alg) {
- case ORINOCO_ALG_TKIP:
- priv->keys[index].cipher = WLAN_CIPHER_SUITE_TKIP;
- break;
-
- case ORINOCO_ALG_WEP:
- priv->keys[index].cipher = (key_len > SMALL_KEY_SIZE) ?
- WLAN_CIPHER_SUITE_WEP104 : WLAN_CIPHER_SUITE_WEP40;
- break;
-
- case ORINOCO_ALG_NONE:
- default:
- priv->keys[index].cipher = 0;
- break;
- }
-
- return 0;
-
-free_key:
- kfree(priv->keys[index].key);
- priv->keys[index].key = NULL;
-
-nomem:
- priv->keys[index].key_len = 0;
- priv->keys[index].seq_len = 0;
- priv->keys[index].cipher = 0;
-
- return -ENOMEM;
-}
-
-static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- struct hermes *hw = &priv->hw;
- struct iw_statistics *wstats = &priv->wstats;
- int err;
- unsigned long flags;
-
- if (!netif_device_present(dev)) {
- printk(KERN_WARNING "%s: get_wireless_stats() called while device not present\n",
- dev->name);
- return NULL; /* FIXME: Can we do better than this? */
- }
-
- /* If busy, return the old stats. Returning NULL may cause
- * the interface to disappear from /proc/net/wireless */
- if (orinoco_lock(priv, &flags) != 0)
- return wstats;
-
- /* We can't really wait for the tallies inquiry command to
- * complete, so we just use the previous results and trigger
- * a new tallies inquiry command for next time - Jean II */
- /* FIXME: Really we should wait for the inquiry to come back -
- * as it is the stats we give don't make a whole lot of sense.
- * Unfortunately, it's not clear how to do that within the
- * wireless extensions framework: I think we're in user
- * context, but a lock seems to be held by the time we get in
- * here so we're not safe to sleep here. */
- hermes_inquire(hw, HERMES_INQ_TALLIES);
-
- if (priv->iw_mode == NL80211_IFTYPE_ADHOC) {
- memset(&wstats->qual, 0, sizeof(wstats->qual));
- /* If a spy address is defined, we report stats of the
- * first spy address - Jean II */
- if (SPY_NUMBER(priv)) {
- wstats->qual.qual = priv->spy_data.spy_stat[0].qual;
- wstats->qual.level = priv->spy_data.spy_stat[0].level;
- wstats->qual.noise = priv->spy_data.spy_stat[0].noise;
- wstats->qual.updated =
- priv->spy_data.spy_stat[0].updated;
- }
- } else {
- struct {
- __le16 qual, signal, noise, unused;
- } __packed cq;
-
- err = HERMES_READ_RECORD(hw, USER_BAP,
- HERMES_RID_COMMSQUALITY, &cq);
-
- if (!err) {
- wstats->qual.qual = (int)le16_to_cpu(cq.qual);
- wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95;
- wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95;
- wstats->qual.updated =
- IW_QUAL_ALL_UPDATED | IW_QUAL_DBM;
- }
- }
-
- orinoco_unlock(priv, &flags);
- return wstats;
-}
-
-/********************************************************************/
-/* Wireless extensions */
-/********************************************************************/
-
-static int orinoco_ioctl_setwap(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
-{
- struct sockaddr *ap_addr = &wrqu->ap_addr;
- struct orinoco_private *priv = ndev_priv(dev);
- int err = -EINPROGRESS; /* Call commit handler */
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- /* Enable automatic roaming - no sanity checks are needed */
- if (is_zero_ether_addr(ap_addr->sa_data) ||
- is_broadcast_ether_addr(ap_addr->sa_data)) {
- priv->bssid_fixed = 0;
- eth_zero_addr(priv->desired_bssid);
-
- /* "off" means keep existing connection */
- if (ap_addr->sa_data[0] == 0) {
- __orinoco_hw_set_wap(priv);
- err = 0;
- }
- goto out;
- }
-
- if (priv->firmware_type == FIRMWARE_TYPE_AGERE) {
- printk(KERN_WARNING "%s: Lucent/Agere firmware doesn't "
- "support manual roaming\n",
- dev->name);
- err = -EOPNOTSUPP;
- goto out;
- }
-
- if (priv->iw_mode != NL80211_IFTYPE_STATION) {
- printk(KERN_WARNING "%s: Manual roaming supported only in "
- "managed mode\n", dev->name);
- err = -EOPNOTSUPP;
- goto out;
- }
-
- /* Intersil firmware hangs without Desired ESSID */
- if (priv->firmware_type == FIRMWARE_TYPE_INTERSIL &&
- strlen(priv->desired_essid) == 0) {
- printk(KERN_WARNING "%s: Desired ESSID must be set for "
- "manual roaming\n", dev->name);
- err = -EOPNOTSUPP;
- goto out;
- }
-
- /* Finally, enable manual roaming */
- priv->bssid_fixed = 1;
- memcpy(priv->desired_bssid, &ap_addr->sa_data, ETH_ALEN);
-
- out:
- orinoco_unlock(priv, &flags);
- return err;
-}
-
-static int orinoco_ioctl_getwap(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
-{
- struct sockaddr *ap_addr = &wrqu->ap_addr;
- struct orinoco_private *priv = ndev_priv(dev);
-
- int err = 0;
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- ap_addr->sa_family = ARPHRD_ETHER;
- err = orinoco_hw_get_current_bssid(priv, ap_addr->sa_data);
-
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-
-static int orinoco_ioctl_setiwencode(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *keybuf)
-{
- struct iw_point *erq = &wrqu->encoding;
- struct orinoco_private *priv = ndev_priv(dev);
- int index = (erq->flags & IW_ENCODE_INDEX) - 1;
- int setindex = priv->tx_key;
- enum orinoco_alg encode_alg = priv->encode_alg;
- int restricted = priv->wep_restrict;
- int err = -EINPROGRESS; /* Call commit handler */
- unsigned long flags;
-
- if (!priv->has_wep)
- return -EOPNOTSUPP;
-
- if (erq->pointer) {
- /* We actually have a key to set - check its length */
- if (erq->length > LARGE_KEY_SIZE)
- return -E2BIG;
-
- if ((erq->length > SMALL_KEY_SIZE) && !priv->has_big_wep)
- return -E2BIG;
- }
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- /* Clear any TKIP key we have */
- if ((priv->has_wpa) && (priv->encode_alg == ORINOCO_ALG_TKIP))
- (void) orinoco_clear_tkip_key(priv, setindex);
-
- if (erq->length > 0) {
- if ((index < 0) || (index >= ORINOCO_MAX_KEYS))
- index = priv->tx_key;
-
- /* Switch on WEP if off */
- if (encode_alg != ORINOCO_ALG_WEP) {
- setindex = index;
- encode_alg = ORINOCO_ALG_WEP;
- }
- } else {
- /* Important note : if the user do "iwconfig eth0 enc off",
- * we will arrive there with an index of -1. This is valid
- * but need to be taken care off... Jean II */
- if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) {
- if ((index != -1) || (erq->flags == 0)) {
- err = -EINVAL;
- goto out;
- }
- } else {
- /* Set the index : Check that the key is valid */
- if (priv->keys[index].key_len == 0) {
- err = -EINVAL;
- goto out;
- }
- setindex = index;
- }
- }
-
- if (erq->flags & IW_ENCODE_DISABLED)
- encode_alg = ORINOCO_ALG_NONE;
- if (erq->flags & IW_ENCODE_OPEN)
- restricted = 0;
- if (erq->flags & IW_ENCODE_RESTRICTED)
- restricted = 1;
-
- if (erq->pointer && erq->length > 0) {
- err = orinoco_set_key(priv, index, ORINOCO_ALG_WEP, keybuf,
- erq->length, NULL, 0);
- }
- priv->tx_key = setindex;
-
- /* Try fast key change if connected and only keys are changed */
- if ((priv->encode_alg == encode_alg) &&
- (priv->wep_restrict == restricted) &&
- netif_carrier_ok(dev)) {
- err = __orinoco_hw_setup_wepkeys(priv);
- /* No need to commit if successful */
- goto out;
- }
-
- priv->encode_alg = encode_alg;
- priv->wep_restrict = restricted;
-
- out:
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-
-static int orinoco_ioctl_getiwencode(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *keybuf)
-{
- struct iw_point *erq = &wrqu->encoding;
- struct orinoco_private *priv = ndev_priv(dev);
- int index = (erq->flags & IW_ENCODE_INDEX) - 1;
- unsigned long flags;
-
- if (!priv->has_wep)
- return -EOPNOTSUPP;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- if ((index < 0) || (index >= ORINOCO_MAX_KEYS))
- index = priv->tx_key;
-
- erq->flags = 0;
- if (!priv->encode_alg)
- erq->flags |= IW_ENCODE_DISABLED;
- erq->flags |= index + 1;
-
- if (priv->wep_restrict)
- erq->flags |= IW_ENCODE_RESTRICTED;
- else
- erq->flags |= IW_ENCODE_OPEN;
-
- erq->length = priv->keys[index].key_len;
-
- memcpy(keybuf, priv->keys[index].key, erq->length);
-
- orinoco_unlock(priv, &flags);
- return 0;
-}
-
-static int orinoco_ioctl_setessid(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *essidbuf)
-{
- struct iw_point *erq = &wrqu->essid;
- struct orinoco_private *priv = ndev_priv(dev);
- unsigned long flags;
-
- /* Note : ESSID is ignored in Ad-Hoc demo mode, but we can set it
- * anyway... - Jean II */
-
- /* Hum... Should not use Wireless Extension constant (may change),
- * should use our own... - Jean II */
- if (erq->length > IW_ESSID_MAX_SIZE)
- return -E2BIG;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- /* NULL the string (for NULL termination & ESSID = ANY) - Jean II */
- memset(priv->desired_essid, 0, sizeof(priv->desired_essid));
-
- /* If not ANY, get the new ESSID */
- if (erq->flags)
- memcpy(priv->desired_essid, essidbuf, erq->length);
-
- orinoco_unlock(priv, &flags);
-
- return -EINPROGRESS; /* Call commit handler */
-}
-
-static int orinoco_ioctl_getessid(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *essidbuf)
-{
- struct iw_point *erq = &wrqu->essid;
- struct orinoco_private *priv = ndev_priv(dev);
- int active;
- int err = 0;
- unsigned long flags;
-
- if (netif_running(dev)) {
- err = orinoco_hw_get_essid(priv, &active, essidbuf);
- if (err < 0)
- return err;
- erq->length = err;
- } else {
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
- memcpy(essidbuf, priv->desired_essid, IW_ESSID_MAX_SIZE);
- erq->length = strlen(priv->desired_essid);
- orinoco_unlock(priv, &flags);
- }
-
- erq->flags = 1;
-
- return 0;
-}
-
-static int orinoco_ioctl_setfreq(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
-{
- struct iw_freq *frq = &wrqu->freq;
- struct orinoco_private *priv = ndev_priv(dev);
- int chan = -1;
- unsigned long flags;
- int err = -EINPROGRESS; /* Call commit handler */
-
- /* In infrastructure mode the AP sets the channel */
- if (priv->iw_mode == NL80211_IFTYPE_STATION)
- return -EBUSY;
-
- if ((frq->e == 0) && (frq->m <= 1000)) {
- /* Setting by channel number */
- chan = frq->m;
- } else {
- /* Setting by frequency */
- int denom = 1;
- int i;
-
- /* Calculate denominator to rescale to MHz */
- for (i = 0; i < (6 - frq->e); i++)
- denom *= 10;
-
- chan = ieee80211_frequency_to_channel(frq->m / denom);
- }
-
- if ((chan < 1) || (chan > NUM_CHANNELS) ||
- !(priv->channel_mask & (1 << (chan - 1))))
- return -EINVAL;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- priv->channel = chan;
- if (priv->iw_mode == NL80211_IFTYPE_MONITOR) {
- /* Fast channel change - no commit if successful */
- struct hermes *hw = &priv->hw;
- err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST |
- HERMES_TEST_SET_CHANNEL,
- chan, NULL);
- }
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-
-static int orinoco_ioctl_getfreq(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
-{
- struct iw_freq *frq = &wrqu->freq;
- struct orinoco_private *priv = ndev_priv(dev);
- int tmp;
-
- /* Locking done in there */
- tmp = orinoco_hw_get_freq(priv);
- if (tmp < 0)
- return tmp;
-
- frq->m = tmp * 100000;
- frq->e = 1;
-
- return 0;
-}
-
-static int orinoco_ioctl_getsens(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
-{
- struct iw_param *srq = &wrqu->sens;
- struct orinoco_private *priv = ndev_priv(dev);
- struct hermes *hw = &priv->hw;
- u16 val;
- int err;
- unsigned long flags;
-
- if (!priv->has_sensitivity)
- return -EOPNOTSUPP;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
- err = hermes_read_wordrec(hw, USER_BAP,
- HERMES_RID_CNFSYSTEMSCALE, &val);
- orinoco_unlock(priv, &flags);
-
- if (err)
- return err;
-
- srq->value = val;
- srq->fixed = 0; /* auto */
-
- return 0;
-}
-
-static int orinoco_ioctl_setsens(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
-{
- struct iw_param *srq = &wrqu->sens;
- struct orinoco_private *priv = ndev_priv(dev);
- int val = srq->value;
- unsigned long flags;
-
- if (!priv->has_sensitivity)
- return -EOPNOTSUPP;
-
- if ((val < 1) || (val > 3))
- return -EINVAL;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
- priv->ap_density = val;
- orinoco_unlock(priv, &flags);
-
- return -EINPROGRESS; /* Call commit handler */
-}
-
-static int orinoco_ioctl_setrate(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
-{
- struct iw_param *rrq = &wrqu->bitrate;
- struct orinoco_private *priv = ndev_priv(dev);
- int ratemode;
- int bitrate; /* 100s of kilobits */
- unsigned long flags;
-
- /* As the user space doesn't know our highest rate, it uses -1
- * to ask us to set the highest rate. Test it using "iwconfig
- * ethX rate auto" - Jean II */
- if (rrq->value == -1)
- bitrate = 110;
- else {
- if (rrq->value % 100000)
- return -EINVAL;
- bitrate = rrq->value / 100000;
- }
-
- ratemode = orinoco_get_bitratemode(bitrate, !rrq->fixed);
-
- if (ratemode == -1)
- return -EINVAL;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
- priv->bitratemode = ratemode;
- orinoco_unlock(priv, &flags);
-
- return -EINPROGRESS;
-}
-
-static int orinoco_ioctl_getrate(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
-{
- struct iw_param *rrq = &wrqu->bitrate;
- struct orinoco_private *priv = ndev_priv(dev);
- int err = 0;
- int bitrate, automatic;
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- orinoco_get_ratemode_cfg(priv->bitratemode, &bitrate, &automatic);
-
- /* If the interface is running we try to find more about the
- current mode */
- if (netif_running(dev)) {
- int act_bitrate;
- int lerr;
-
- /* Ignore errors if we can't get the actual bitrate */
- lerr = orinoco_hw_get_act_bitrate(priv, &act_bitrate);
- if (!lerr)
- bitrate = act_bitrate;
- }
-
- orinoco_unlock(priv, &flags);
-
- rrq->value = bitrate;
- rrq->fixed = !automatic;
- rrq->disabled = 0;
-
- return err;
-}
-
-static int orinoco_ioctl_setpower(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
-{
- struct iw_param *prq = &wrqu->power;
- struct orinoco_private *priv = ndev_priv(dev);
- int err = -EINPROGRESS; /* Call commit handler */
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- if (prq->disabled) {
- priv->pm_on = 0;
- } else {
- switch (prq->flags & IW_POWER_MODE) {
- case IW_POWER_UNICAST_R:
- priv->pm_mcast = 0;
- priv->pm_on = 1;
- break;
- case IW_POWER_ALL_R:
- priv->pm_mcast = 1;
- priv->pm_on = 1;
- break;
- case IW_POWER_ON:
- /* No flags : but we may have a value - Jean II */
- break;
- default:
- err = -EINVAL;
- goto out;
- }
-
- if (prq->flags & IW_POWER_TIMEOUT) {
- priv->pm_on = 1;
- priv->pm_timeout = prq->value / 1000;
- }
- if (prq->flags & IW_POWER_PERIOD) {
- priv->pm_on = 1;
- priv->pm_period = prq->value / 1000;
- }
- /* It's valid to not have a value if we are just toggling
- * the flags... Jean II */
- if (!priv->pm_on) {
- err = -EINVAL;
- goto out;
- }
- }
-
- out:
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-
-static int orinoco_ioctl_getpower(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
-{
- struct iw_param *prq = &wrqu->power;
- struct orinoco_private *priv = ndev_priv(dev);
- struct hermes *hw = &priv->hw;
- int err = 0;
- u16 enable, period, timeout, mcast;
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- err = hermes_read_wordrec(hw, USER_BAP,
- HERMES_RID_CNFPMENABLED, &enable);
- if (err)
- goto out;
-
- err = hermes_read_wordrec(hw, USER_BAP,
- HERMES_RID_CNFMAXSLEEPDURATION, &period);
- if (err)
- goto out;
-
- err = hermes_read_wordrec(hw, USER_BAP,
- HERMES_RID_CNFPMHOLDOVERDURATION, &timeout);
- if (err)
- goto out;
-
- err = hermes_read_wordrec(hw, USER_BAP,
- HERMES_RID_CNFMULTICASTRECEIVE, &mcast);
- if (err)
- goto out;
-
- prq->disabled = !enable;
- /* Note : by default, display the period */
- if ((prq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) {
- prq->flags = IW_POWER_TIMEOUT;
- prq->value = timeout * 1000;
- } else {
- prq->flags = IW_POWER_PERIOD;
- prq->value = period * 1000;
- }
- if (mcast)
- prq->flags |= IW_POWER_ALL_R;
- else
- prq->flags |= IW_POWER_UNICAST_R;
-
- out:
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-
-static int orinoco_ioctl_set_encodeext(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- struct iw_point *encoding = &wrqu->encoding;
- struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
- int idx, alg = ext->alg, set_key = 1;
- unsigned long flags;
- int err = -EINVAL;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- /* Determine and validate the key index */
- idx = encoding->flags & IW_ENCODE_INDEX;
- if (idx) {
- if ((idx < 1) || (idx > 4))
- goto out;
- idx--;
- } else
- idx = priv->tx_key;
-
- if (encoding->flags & IW_ENCODE_DISABLED)
- alg = IW_ENCODE_ALG_NONE;
-
- if (priv->has_wpa && (alg != IW_ENCODE_ALG_TKIP)) {
- /* Clear any TKIP TX key we had */
- (void) orinoco_clear_tkip_key(priv, priv->tx_key);
- }
-
- if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
- priv->tx_key = idx;
- set_key = ((alg == IW_ENCODE_ALG_TKIP) ||
- (ext->key_len > 0)) ? 1 : 0;
- }
-
- if (set_key) {
- /* Set the requested key first */
- switch (alg) {
- case IW_ENCODE_ALG_NONE:
- priv->encode_alg = ORINOCO_ALG_NONE;
- err = orinoco_set_key(priv, idx, ORINOCO_ALG_NONE,
- NULL, 0, NULL, 0);
- break;
-
- case IW_ENCODE_ALG_WEP:
- if (ext->key_len <= 0)
- goto out;
-
- priv->encode_alg = ORINOCO_ALG_WEP;
- err = orinoco_set_key(priv, idx, ORINOCO_ALG_WEP,
- ext->key, ext->key_len, NULL, 0);
- break;
-
- case IW_ENCODE_ALG_TKIP:
- {
- u8 *tkip_iv = NULL;
-
- if (!priv->has_wpa ||
- (ext->key_len > sizeof(struct orinoco_tkip_key)))
- goto out;
-
- priv->encode_alg = ORINOCO_ALG_TKIP;
-
- if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID)
- tkip_iv = &ext->rx_seq[0];
-
- err = orinoco_set_key(priv, idx, ORINOCO_ALG_TKIP,
- ext->key, ext->key_len, tkip_iv,
- ORINOCO_SEQ_LEN);
-
- err = __orinoco_hw_set_tkip_key(priv, idx,
- ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY,
- priv->keys[idx].key, priv->keys[idx].key_len,
- tkip_iv, ORINOCO_SEQ_LEN, NULL, 0);
- if (err)
- printk(KERN_ERR "%s: Error %d setting TKIP key"
- "\n", dev->name, err);
-
- goto out;
- }
- default:
- goto out;
- }
- }
- err = -EINPROGRESS;
- out:
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-
-static int orinoco_ioctl_get_encodeext(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- struct iw_point *encoding = &wrqu->encoding;
- struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
- int idx, max_key_len;
- unsigned long flags;
- int err;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- err = -EINVAL;
- max_key_len = encoding->length - sizeof(*ext);
- if (max_key_len < 0)
- goto out;
-
- idx = encoding->flags & IW_ENCODE_INDEX;
- if (idx) {
- if ((idx < 1) || (idx > 4))
- goto out;
- idx--;
- } else
- idx = priv->tx_key;
-
- encoding->flags = idx + 1;
- memset(ext, 0, sizeof(*ext));
-
- switch (priv->encode_alg) {
- case ORINOCO_ALG_NONE:
- ext->alg = IW_ENCODE_ALG_NONE;
- ext->key_len = 0;
- encoding->flags |= IW_ENCODE_DISABLED;
- break;
- case ORINOCO_ALG_WEP:
- ext->alg = IW_ENCODE_ALG_WEP;
- ext->key_len = min(priv->keys[idx].key_len, max_key_len);
- memcpy(ext->key, priv->keys[idx].key, ext->key_len);
- encoding->flags |= IW_ENCODE_ENABLED;
- break;
- case ORINOCO_ALG_TKIP:
- ext->alg = IW_ENCODE_ALG_TKIP;
- ext->key_len = min(priv->keys[idx].key_len, max_key_len);
- memcpy(ext->key, priv->keys[idx].key, ext->key_len);
- encoding->flags |= IW_ENCODE_ENABLED;
- break;
- }
-
- err = 0;
- out:
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-
-static int orinoco_ioctl_set_auth(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- struct hermes *hw = &priv->hw;
- struct iw_param *param = &wrqu->param;
- unsigned long flags;
- int ret = -EINPROGRESS;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- switch (param->flags & IW_AUTH_INDEX) {
- case IW_AUTH_WPA_VERSION:
- case IW_AUTH_CIPHER_PAIRWISE:
- case IW_AUTH_CIPHER_GROUP:
- case IW_AUTH_RX_UNENCRYPTED_EAPOL:
- case IW_AUTH_PRIVACY_INVOKED:
- case IW_AUTH_DROP_UNENCRYPTED:
- /*
- * orinoco does not use these parameters
- */
- break;
-
- case IW_AUTH_MFP:
- /* Management Frame Protection not supported.
- * Only fail if set to required.
- */
- if (param->value == IW_AUTH_MFP_REQUIRED)
- ret = -EINVAL;
- break;
-
- case IW_AUTH_KEY_MGMT:
- /* wl_lkm implies value 2 == PSK for Hermes I
- * which ties in with WEXT
- * no other hints tho :(
- */
- priv->key_mgmt = param->value;
- break;
-
- case IW_AUTH_TKIP_COUNTERMEASURES:
- /* When countermeasures are enabled, shut down the
- * card; when disabled, re-enable the card. This must
- * take effect immediately.
- *
- * TODO: Make sure that the EAPOL message is getting
- * out before card disabled
- */
- if (param->value) {
- priv->tkip_cm_active = 1;
- ret = hermes_disable_port(hw, 0);
- } else {
- priv->tkip_cm_active = 0;
- ret = hermes_enable_port(hw, 0);
- }
- break;
-
- case IW_AUTH_80211_AUTH_ALG:
- if (param->value & IW_AUTH_ALG_SHARED_KEY)
- priv->wep_restrict = 1;
- else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM)
- priv->wep_restrict = 0;
- else
- ret = -EINVAL;
- break;
-
- case IW_AUTH_WPA_ENABLED:
- if (priv->has_wpa) {
- priv->wpa_enabled = param->value ? 1 : 0;
- } else {
- if (param->value)
- ret = -EOPNOTSUPP;
- /* else silently accept disable of WPA */
- priv->wpa_enabled = 0;
- }
- break;
-
- default:
- ret = -EOPNOTSUPP;
- }
-
- orinoco_unlock(priv, &flags);
- return ret;
-}
-
-static int orinoco_ioctl_get_auth(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- struct iw_param *param = &wrqu->param;
- unsigned long flags;
- int ret = 0;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- switch (param->flags & IW_AUTH_INDEX) {
- case IW_AUTH_KEY_MGMT:
- param->value = priv->key_mgmt;
- break;
-
- case IW_AUTH_TKIP_COUNTERMEASURES:
- param->value = priv->tkip_cm_active;
- break;
-
- case IW_AUTH_80211_AUTH_ALG:
- if (priv->wep_restrict)
- param->value = IW_AUTH_ALG_SHARED_KEY;
- else
- param->value = IW_AUTH_ALG_OPEN_SYSTEM;
- break;
-
- case IW_AUTH_WPA_ENABLED:
- param->value = priv->wpa_enabled;
- break;
-
- default:
- ret = -EOPNOTSUPP;
- }
-
- orinoco_unlock(priv, &flags);
- return ret;
-}
-
-static int orinoco_ioctl_set_genie(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- u8 *buf;
- unsigned long flags;
-
- /* cut off at IEEE80211_MAX_DATA_LEN */
- if ((wrqu->data.length > IEEE80211_MAX_DATA_LEN) ||
- (wrqu->data.length && (extra == NULL)))
- return -EINVAL;
-
- if (wrqu->data.length) {
- buf = kmemdup(extra, wrqu->data.length, GFP_KERNEL);
- if (buf == NULL)
- return -ENOMEM;
- } else
- buf = NULL;
-
- if (orinoco_lock(priv, &flags) != 0) {
- kfree(buf);
- return -EBUSY;
- }
-
- kfree(priv->wpa_ie);
- priv->wpa_ie = buf;
- priv->wpa_ie_len = wrqu->data.length;
-
- if (priv->wpa_ie) {
- /* Looks like wl_lkm wants to check the auth alg, and
- * somehow pass it to the firmware.
- * Instead it just calls the key mgmt rid
- * - we do this in set auth.
- */
- }
-
- orinoco_unlock(priv, &flags);
- return 0;
-}
-
-static int orinoco_ioctl_get_genie(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- unsigned long flags;
- int err = 0;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- if ((priv->wpa_ie_len == 0) || (priv->wpa_ie == NULL)) {
- wrqu->data.length = 0;
- goto out;
- }
-
- if (wrqu->data.length < priv->wpa_ie_len) {
- err = -E2BIG;
- goto out;
- }
-
- wrqu->data.length = priv->wpa_ie_len;
- memcpy(extra, priv->wpa_ie, priv->wpa_ie_len);
-
-out:
- orinoco_unlock(priv, &flags);
- return err;
-}
-
-static int orinoco_ioctl_set_mlme(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- struct iw_mlme *mlme = (struct iw_mlme *)extra;
- unsigned long flags;
- int ret = 0;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- switch (mlme->cmd) {
- case IW_MLME_DEAUTH:
- /* silently ignore */
- break;
-
- case IW_MLME_DISASSOC:
-
- ret = orinoco_hw_disassociate(priv, mlme->addr.sa_data,
- mlme->reason_code);
- break;
-
- default:
- ret = -EOPNOTSUPP;
- }
-
- orinoco_unlock(priv, &flags);
- return ret;
-}
-
-static int orinoco_ioctl_reset(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
-{
- struct orinoco_private *priv = ndev_priv(dev);
-
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
-
- if (info->cmd == (SIOCIWFIRSTPRIV + 0x1)) {
- printk(KERN_DEBUG "%s: Forcing reset!\n", dev->name);
-
- /* Firmware reset */
- orinoco_reset(&priv->reset_work);
- } else {
- printk(KERN_DEBUG "%s: Force scheduling reset!\n", dev->name);
-
- schedule_work(&priv->reset_work);
- }
-
- return 0;
-}
-
-static int orinoco_ioctl_setibssport(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
-
-{
- struct orinoco_private *priv = ndev_priv(dev);
- int val = *((int *) extra);
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- priv->ibss_port = val;
-
- /* Actually update the mode we are using */
- set_port_type(priv);
-
- orinoco_unlock(priv, &flags);
- return -EINPROGRESS; /* Call commit handler */
-}
-
-static int orinoco_ioctl_getibssport(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- int *val = (int *) extra;
-
- *val = priv->ibss_port;
- return 0;
-}
-
-static int orinoco_ioctl_setport3(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- int val = *((int *) extra);
- int err = 0;
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- switch (val) {
- case 0: /* Try to do IEEE ad-hoc mode */
- if (!priv->has_ibss) {
- err = -EINVAL;
- break;
- }
- priv->prefer_port3 = 0;
-
- break;
-
- case 1: /* Try to do Lucent proprietary ad-hoc mode */
- if (!priv->has_port3) {
- err = -EINVAL;
- break;
- }
- priv->prefer_port3 = 1;
- break;
-
- default:
- err = -EINVAL;
- }
-
- if (!err) {
- /* Actually update the mode we are using */
- set_port_type(priv);
- err = -EINPROGRESS;
- }
-
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-
-static int orinoco_ioctl_getport3(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- int *val = (int *) extra;
-
- *val = priv->prefer_port3;
- return 0;
-}
-
-static int orinoco_ioctl_setpreamble(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- unsigned long flags;
- int val;
-
- if (!priv->has_preamble)
- return -EOPNOTSUPP;
-
- /* 802.11b has recently defined some short preamble.
- * Basically, the Phy header has been reduced in size.
- * This increase performance, especially at high rates
- * (the preamble is transmitted at 1Mb/s), unfortunately
- * this give compatibility troubles... - Jean II */
- val = *((int *) extra);
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- if (val)
- priv->preamble = 1;
- else
- priv->preamble = 0;
-
- orinoco_unlock(priv, &flags);
-
- return -EINPROGRESS; /* Call commit handler */
-}
-
-static int orinoco_ioctl_getpreamble(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- int *val = (int *) extra;
-
- if (!priv->has_preamble)
- return -EOPNOTSUPP;
-
- *val = priv->preamble;
- return 0;
-}
-
-/* ioctl interface to hermes_read_ltv()
- * To use with iwpriv, pass the RID as the token argument, e.g.
- * iwpriv get_rid [0xfc00]
- * At least Wireless Tools 25 is required to use iwpriv.
- * For Wireless Tools 25 and 26 append "dummy" are the end. */
-static int orinoco_ioctl_getrid(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
-{
- struct iw_point *data = &wrqu->data;
- struct orinoco_private *priv = ndev_priv(dev);
- struct hermes *hw = &priv->hw;
- int rid = data->flags;
- u16 length;
- int err;
- unsigned long flags;
-
- /* It's a "get" function, but we don't want users to access the
- * WEP key and other raw firmware data */
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
-
- if (rid < 0xfc00 || rid > 0xffff)
- return -EINVAL;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- err = hw->ops->read_ltv(hw, USER_BAP, rid, MAX_RID_LEN, &length,
- extra);
- if (err)
- goto out;
-
- data->length = min_t(u16, HERMES_RECLEN_TO_BYTES(length),
- MAX_RID_LEN);
-
- out:
- orinoco_unlock(priv, &flags);
- return err;
-}
-
-
-/* Commit handler, called after set operations */
-static int orinoco_ioctl_commit(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- unsigned long flags;
- int err = 0;
-
- if (!priv->open)
- return 0;
-
- if (orinoco_lock(priv, &flags) != 0)
- return err;
-
- err = orinoco_commit(priv);
-
- orinoco_unlock(priv, &flags);
- return err;
-}
-
-static const struct iw_priv_args orinoco_privtab[] = {
- { SIOCIWFIRSTPRIV + 0x0, 0, 0, "force_reset" },
- { SIOCIWFIRSTPRIV + 0x1, 0, 0, "card_reset" },
- { SIOCIWFIRSTPRIV + 0x2, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- 0, "set_port3" },
- { SIOCIWFIRSTPRIV + 0x3, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "get_port3" },
- { SIOCIWFIRSTPRIV + 0x4, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- 0, "set_preamble" },
- { SIOCIWFIRSTPRIV + 0x5, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "get_preamble" },
- { SIOCIWFIRSTPRIV + 0x6, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- 0, "set_ibssport" },
- { SIOCIWFIRSTPRIV + 0x7, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "get_ibssport" },
- { SIOCIWFIRSTPRIV + 0x9, 0, IW_PRIV_TYPE_BYTE | MAX_RID_LEN,
- "get_rid" },
-};
-
-
-/*
- * Structures to export the Wireless Handlers
- */
-
-static const iw_handler orinoco_handler[] = {
- IW_HANDLER(SIOCSIWCOMMIT, orinoco_ioctl_commit),
- IW_HANDLER(SIOCGIWNAME, cfg80211_wext_giwname),
- IW_HANDLER(SIOCSIWFREQ, orinoco_ioctl_setfreq),
- IW_HANDLER(SIOCGIWFREQ, orinoco_ioctl_getfreq),
- IW_HANDLER(SIOCSIWMODE, cfg80211_wext_siwmode),
- IW_HANDLER(SIOCGIWMODE, cfg80211_wext_giwmode),
- IW_HANDLER(SIOCSIWSENS, orinoco_ioctl_setsens),
- IW_HANDLER(SIOCGIWSENS, orinoco_ioctl_getsens),
- IW_HANDLER(SIOCGIWRANGE, cfg80211_wext_giwrange),
- IW_HANDLER(SIOCSIWSPY, iw_handler_set_spy),
- IW_HANDLER(SIOCGIWSPY, iw_handler_get_spy),
- IW_HANDLER(SIOCSIWTHRSPY, iw_handler_set_thrspy),
- IW_HANDLER(SIOCGIWTHRSPY, iw_handler_get_thrspy),
- IW_HANDLER(SIOCSIWAP, orinoco_ioctl_setwap),
- IW_HANDLER(SIOCGIWAP, orinoco_ioctl_getwap),
- IW_HANDLER(SIOCSIWSCAN, cfg80211_wext_siwscan),
- IW_HANDLER(SIOCGIWSCAN, cfg80211_wext_giwscan),
- IW_HANDLER(SIOCSIWESSID, orinoco_ioctl_setessid),
- IW_HANDLER(SIOCGIWESSID, orinoco_ioctl_getessid),
- IW_HANDLER(SIOCSIWRATE, orinoco_ioctl_setrate),
- IW_HANDLER(SIOCGIWRATE, orinoco_ioctl_getrate),
- IW_HANDLER(SIOCSIWRTS, cfg80211_wext_siwrts),
- IW_HANDLER(SIOCGIWRTS, cfg80211_wext_giwrts),
- IW_HANDLER(SIOCSIWFRAG, cfg80211_wext_siwfrag),
- IW_HANDLER(SIOCGIWFRAG, cfg80211_wext_giwfrag),
- IW_HANDLER(SIOCGIWRETRY, cfg80211_wext_giwretry),
- IW_HANDLER(SIOCSIWENCODE, orinoco_ioctl_setiwencode),
- IW_HANDLER(SIOCGIWENCODE, orinoco_ioctl_getiwencode),
- IW_HANDLER(SIOCSIWPOWER, orinoco_ioctl_setpower),
- IW_HANDLER(SIOCGIWPOWER, orinoco_ioctl_getpower),
- IW_HANDLER(SIOCSIWGENIE, orinoco_ioctl_set_genie),
- IW_HANDLER(SIOCGIWGENIE, orinoco_ioctl_get_genie),
- IW_HANDLER(SIOCSIWMLME, orinoco_ioctl_set_mlme),
- IW_HANDLER(SIOCSIWAUTH, orinoco_ioctl_set_auth),
- IW_HANDLER(SIOCGIWAUTH, orinoco_ioctl_get_auth),
- IW_HANDLER(SIOCSIWENCODEEXT, orinoco_ioctl_set_encodeext),
- IW_HANDLER(SIOCGIWENCODEEXT, orinoco_ioctl_get_encodeext),
-};
-
-
-/*
- Added typecasting since we no longer use iwreq_data -- Moustafa
- */
-static const iw_handler orinoco_private_handler[] = {
- [0] = orinoco_ioctl_reset,
- [1] = orinoco_ioctl_reset,
- [2] = orinoco_ioctl_setport3,
- [3] = orinoco_ioctl_getport3,
- [4] = orinoco_ioctl_setpreamble,
- [5] = orinoco_ioctl_getpreamble,
- [6] = orinoco_ioctl_setibssport,
- [7] = orinoco_ioctl_getibssport,
- [9] = orinoco_ioctl_getrid,
-};
-
-const struct iw_handler_def orinoco_handler_def = {
- .num_standard = ARRAY_SIZE(orinoco_handler),
- .num_private = ARRAY_SIZE(orinoco_private_handler),
- .num_private_args = ARRAY_SIZE(orinoco_privtab),
- .standard = orinoco_handler,
- .private = orinoco_private_handler,
- .private_args = orinoco_privtab,
- .get_wireless_stats = orinoco_get_wireless_stats,
-};
diff --git a/drivers/net/wireless/intersil/orinoco/wext.h b/drivers/net/wireless/intersil/orinoco/wext.h
deleted file mode 100644
index 1479f4e26dde..000000000000
--- a/drivers/net/wireless/intersil/orinoco/wext.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* Wireless extensions support.
- *
- * See copyright notice in main.c
- */
-#ifndef _ORINOCO_WEXT_H_
-#define _ORINOCO_WEXT_H_
-
-#include <net/iw_handler.h>
-
-/* Structure defining all our WEXT handlers */
-extern const struct iw_handler_def orinoco_handler_def;
-
-#endif /* _ORINOCO_WEXT_H_ */