diff options
| author | Arnd Bergmann <arnd@arndb.de> | 2024-04-29 16:43:22 +0200 |
|---|---|---|
| committer | Arnd Bergmann <arnd@arndb.de> | 2024-04-29 16:43:52 +0200 |
| commit | 1d3454fafbb4e819239016b465adea279cfe4177 (patch) | |
| tree | 118bbe0bdb0bf6b003154931d3fb986ec2b56144 | |
| parent | 80a02b17631070ee1c1b91f111cedc9962311e79 (diff) | |
| parent | 873d845a357a4d89700cb1bb5b3da68890756f50 (diff) | |
Merge tag 'qcom-arm64-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v6.10
Support for Sony Xperia 1V, on the SM8550 platform, is added.
On IPQ8074, UART6 is described and unused gpios from QPIC are removed.
Backlight and touchscreen are described on Samsung Grand Prime devices.
RGB LED is added to Sony Xperia "Yoshino" devices, on which the
volume-up key definition is corrected as well.
Light Pulse Generator node is added to PM6150L PMIC, and blocks related
to USB Type-C on PM6150 are added.
On QCS6490 Rb3Gen2 UFS storage, USB Type-C management, a couple of
remoteprocs and both USB Type-C and native DisplayPort are enabled.
For the related IDP display is enabled, and the PMIC volume and power
buttons are described.
The inline crypto engine is added for SC7280, and an additional turbo
frequency is added to the MDP.
USB Type-C port management is introduce for the QRB2210 RB1. WiFi
firmware-name qualifier is added to both RB1 and RB2 boards.
The LMH node is added for the QCM2290, to configure the thresholds as
well as provide thermal pressure input.
The regulator range is adjusted for SD-card IO on SA8155P ADP, to allow
UHS modes.
The unused DCC is disabled on SC7180, and unused PMIC gpio block is
disabled on Trogdor.
For Lenovo Flex 5G, on SC8180X, the GPU firmware path is aligned with
agreed upon firmware structure. The frequency of the I2C bus for
touchpad is brought up to mitigate missing events. A number of
additional cleanups are introduced.
For SC8280XP GICv3 ITS is wired up for PCIe. EAS properties ad
introduced. A PS_HOLD-based restart node is introduced and acts as a
fallback if other mechanisms are unavailable to restart the board.
QFPROM is described, missing LMH interrupts for thermal pressure are
added. The TCSR download mode register is added, to allow configuring
if download mode should be entered on a crash.
USB Type-C handling is introduce for Fairphone FP3 as well.
On SM6350 crypto engine and DisplayPort controllers are introduced.
WiFi is enabled on the SM8150 Hardware Development Kit (HDK)
USB PD properties are added on Xiaomi Mi Pad 5 Pro devices.
Interconnect paths are added for UFS on SM8350, to ensure the bus is
voted for when the controller is operating.
On SM8550 the DMA coherency properties are corrected for SMMU and a few
consumers. Missing DWC3 quirks are added and the SNPS PHY parameters are
adjusted. Fastrpc banks are marked non-secure as needed.
The GPU description is introduced on SM8650, and enabled on the QRD. A
missing reserved-memory node is added, as is a few missing fastrpc
compute banks, and the non-secure-domain flag for other banks.
On X1 Elite SPMI support is added, together with PMIC definitons. The
link properties for DP3 are corrected, and audio-related resets are
introduced. SoundWire properties are corrected.
Nodes describing the PCIe bridge under the host controller is added
for a bunch of platforms.
The GPIO carrying orientation information for USB Type-C is added across
Fairphone 5, Lenovo Flex 5G, Lenovo Thinkpad X13s, SM8350 and SM845
HDKs.
A few dtbTool-specific compatibles for msm8916 is dropped from the
bindings.
A number of DeviceTree binding validation issues are corrected.
* tag 'qcom-arm64-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (110 commits)
dt-bindings: arm: qcom: Add Samsung Galaxy S5 China (kltechn)
arm64: dts: qcom: qrb4210-rb1: add firmware-name qualifier to WiFi node
arm64: dts: qcom: qrb2210-rb1: add firmware-name qualifier to WiFi node
arm64: dts: qcom: ipq6018: Add PCIe bridge node
arm64: dts: qcom: ipq8074: Add PCIe bridge node
arm64: dts: qcom: msm8996: Add PCIe bridge node
arm64: dts: qcom: sc8180x: Add PCIe bridge node
arm64: dts: qcom: qcs404: Add PCIe bridge node
arm64: dts: qcom: sc7280: Add PCIe bridge node
arm64: dts: qcom: msm8998: Add PCIe bridge node
arm64: dts: qcom: sc8280xp: Add PCIe bridge node
arm64: dts: qcom: sa8775p: Add PCIe bridge node
arm64: dts: qcom: sm8650: Add PCIe bridge node
arm64: dts: qcom: sm8550: Add PCIe bridge node
arm64: dts: qcom: sm8450: Add PCIe bridge node
arm64: dts: qcom: sm8350: Add PCIe bridge node
arm64: dts: qcom: sm8150: Add PCIe bridge node
arm64: dts: qcom: sdm845: Add PCIe bridge node
arm64: dts: qcom: sm8250: Add PCIe bridge node
arm64: dts: qcom: sdm845-db845c: make pcie0_3p3v_dual always-on
...
Link: https://lore.kernel.org/r/20240427175951.1439887-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
60 files changed, 2720 insertions, 148 deletions
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index d2910982ae86..ae885414b181 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -185,13 +185,16 @@ properties: - oneplus,bacon - samsung,klte - sony,xperia-castor + - sony,xperia-leo - const: qcom,msm8974pro - const: qcom,msm8974 - items: - - const: qcom,msm8916-mtp - - const: qcom,msm8916-mtp/1 - - const: qcom,msm8916 + - enum: + - samsung,kltechn + - const: samsung,klte + - const: qcom,msm8974pro + - const: qcom,msm8974 - items: - enum: @@ -201,6 +204,8 @@ properties: - gplus,fl8005a - huawei,g7 - longcheer,l8910 + - longcheer,l8150 + - qcom,msm8916-mtp - samsung,a3u-eur - samsung,a5u-eur - samsung,e5 @@ -222,11 +227,6 @@ properties: - const: qcom,msm8916 - items: - - const: longcheer,l8150 - - const: qcom,msm8916-v1-qrd/9-v1 - - const: qcom,msm8916 - - - items: - enum: - motorola,potter - xiaomi,daisy @@ -1004,6 +1004,7 @@ properties: - qcom,sm8550-hdk - qcom,sm8550-mtp - qcom,sm8550-qrd + - sony,pdx234 - const: qcom,sm8550 - items: diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml index 4310bae6c58e..4512390f90f0 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml @@ -58,20 +58,6 @@ patternProperties: required: - compatible -allOf: - - if: - not: - properties: - compatible: - contains: - enum: - - qcom,sm8450-pmic-glink - - qcom,sm8550-pmic-glink - - qcom,x1e80100-pmic-glink - then: - properties: - orientation-gpios: false - additionalProperties: false examples: diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 7d40ec5e7d21..f63abb43e9fe 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -241,6 +241,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8550-sony-xperia-yodo-pdx234.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8650-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts index 9ffad7d1f2b6..aba08424aa38 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts @@ -91,7 +91,7 @@ compatible = "gpio-leds"; - led@1 { + led-1 { label = "apq8016-sbc:green:user1"; function = LED_FUNCTION_HEARTBEAT; color = <LED_COLOR_ID_GREEN>; @@ -100,7 +100,7 @@ default-state = "off"; }; - led@2 { + led-2 { label = "apq8016-sbc:green:user2"; function = LED_FUNCTION_DISK_ACTIVITY; color = <LED_COLOR_ID_GREEN>; @@ -109,7 +109,7 @@ default-state = "off"; }; - led@3 { + led-3 { label = "apq8016-sbc:green:user3"; function = LED_FUNCTION_DISK_ACTIVITY; color = <LED_COLOR_ID_GREEN>; @@ -118,7 +118,7 @@ default-state = "off"; }; - led@4 { + led-4 { label = "apq8016-sbc:green:user4"; color = <LED_COLOR_ID_GREEN>; gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>; @@ -127,7 +127,7 @@ default-state = "off"; }; - led@5 { + led-5 { label = "apq8016-sbc:yellow:wlan"; function = LED_FUNCTION_WLAN; color = <LED_COLOR_ID_YELLOW>; @@ -136,7 +136,7 @@ default-state = "off"; }; - led@6 { + led-6 { label = "apq8016-sbc:blue:bt"; function = LED_FUNCTION_BLUETOOTH; color = <LED_COLOR_ID_BLUE>; diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index 4e29adea570a..17ab6c475958 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -907,6 +907,16 @@ "axi_s_sticky"; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index e5b89753aa5c..5d42de829e75 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -323,6 +323,13 @@ bias-disable; }; + serial_5_pins: serial5-state { + pins = "gpio9", "gpio16"; + function = "blsp5_uart"; + drive-strength = <8>; + bias-disable; + }; + i2c_0_pins: i2c-0-state { pins = "gpio42", "gpio43"; function = "blsp1_i2c"; @@ -349,7 +356,7 @@ "gpio5", "gpio6", "gpio7", "gpio8", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14", - "gpio15", "gpio16", "gpio17"; + "gpio15", "gpio17"; function = "qpic"; drive-strength = <8>; bias-disable; @@ -471,6 +478,18 @@ status = "disabled"; }; + blsp1_uart6: serial@78b4000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b4000 0x200>; + interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART6_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-0 = <&serial_5_pins>; + pinctrl-names = "default"; + status = "disabled"; + }; + blsp1_spi1: spi@78b5000 { compatible = "qcom,spi-qup-v2.2.1"; #address-cells = <1>; @@ -864,6 +883,16 @@ "ahb", "axi_m_sticky"; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie0: pcie@20000000 { @@ -929,6 +958,16 @@ "axi_m_sticky", "axi_s_sticky"; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts index 3a3e794c022f..7f0c2c1b8a94 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -12,7 +12,7 @@ / { model = "Longcheer L8150"; - compatible = "longcheer,l8150", "qcom,msm8916-v1-qrd/9-v1", "qcom,msm8916"; + compatible = "longcheer,l8150", "qcom,msm8916"; chassis-type = "handset"; aliases { diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts index ac527a3a0826..c11a845e91bb 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts @@ -9,7 +9,7 @@ / { model = "Qualcomm Technologies, Inc. MSM 8916 MTP"; - compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp/1", "qcom,msm8916"; + compatible = "qcom,msm8916-mtp", "qcom,msm8916"; chassis-type = "handset"; aliases { diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index 2937495940ea..4bbbee80b5e4 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -128,6 +128,12 @@ pinctrl-names = "default"; pinctrl-0 = <&muic_int_default>; + + usb_con: connector { + compatible = "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi index 3c49dac92d2d..c50f81a68897 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi @@ -23,6 +23,12 @@ pinctrl-names = "default"; pinctrl-0 = <&muic_int_default>; + + usb_con: connector { + compatible = "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi index c2800ad2dd5b..5e933fb8b363 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi @@ -26,6 +26,30 @@ }; }; + clk_pwm_backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&clk_pwm 0 100000>; + + enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>; + + brightness-levels = <0 255>; + num-interpolated-steps = <255>; + default-brightness-level = <128>; + + pinctrl-0 = <&backlight_en_default>; + pinctrl-names = "default"; + }; + + clk_pwm: pwm { + compatible = "clk-pwm"; + #pwm-cells = <2>; + + clocks = <&gcc GCC_GP2_CLK>; + + pinctrl-0 = <&backlight_pwm_default>; + pinctrl-names = "default"; + }; + gpio-keys { compatible = "gpio-keys"; @@ -66,6 +90,19 @@ pinctrl-0 = <&motor_en_default>; pinctrl-names = "default"; }; + + reg_vdd_tsp_a: regulator-vdd-tsp-a { + compatible = "regulator-fixed"; + regulator-name = "vdd_tsp_a"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&tsp_en_default>; + pinctrl-names = "default"; + }; }; &blsp_i2c1 { @@ -94,6 +131,26 @@ }; }; +&blsp_i2c5 { + status = "okay"; + + touchscreen: touchscreen@20 { + compatible = "zinitix,bt541"; + reg = <0x20>; + + interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>; + + touchscreen-size-x = <540>; + touchscreen-size-y = <960>; + + vcca-supply = <®_vdd_tsp_a>; + vdd-supply = <&pm8916_l6>; + + pinctrl-0 = <&tsp_int_default>; + pinctrl-names = "default"; + }; +}; + &blsp_uart2 { status = "okay"; }; @@ -166,6 +223,18 @@ }; &tlmm { + backlight_en_default: backlight-en-default-state { + pins = "gpio98"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + backlight_pwm_default: backlight-pwm-default-state { + pins = "gpio50"; + function = "gcc_gp2_clk_a"; + }; + fg_alert_default: fg-alert-default-state { pins = "gpio121"; function = "gpio"; @@ -200,4 +269,18 @@ drive-strength = <2>; bias-disable; }; + + tsp_en_default: tsp-en-default-state { + pins = "gpio73"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_int_default: tsp-int-default-state { + pins = "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi index 42843771ae2a..b438fa81886c 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi @@ -5,6 +5,9 @@ /* SM5504 MUIC instead of SM5502 */ /delete-node/ &muic; +/* Touchscreen varies depending on model variant */ +/delete-node/ &touchscreen; + &blsp_i2c1 { muic: extcon@14 { compatible = "siliconmitus,sm5504-muic"; @@ -14,3 +17,12 @@ pinctrl-names = "default"; }; }; + +/* On rossa backlight is controlled with MIPI DCS commands */ +&clk_pwm { + status = "disabled"; +}; + +&clk_pwm_backlight { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts index aa6c39482a2f..0c599e71a464 100644 --- a/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts +++ b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts @@ -286,6 +286,12 @@ pinctrl-0 = <&muic_int_default>; pinctrl-names = "default"; + + usb_con: connector { + compatible = "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi index f1011bb641c6..5d818fe057dd 100644 --- a/arch/arm64/boot/dts/qcom/msm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi @@ -1323,6 +1323,20 @@ snps,hird-threshold = /bits/ 8 <0x00>; maximum-speed = "high-speed"; + + usb-role-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_dwc3_hs: endpoint { + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 1601e46549e7..8d2cb6f41095 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -1929,6 +1929,16 @@ "cfg", "bus_master", "bus_slave"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie1: pcie@608000 { @@ -1982,6 +1992,16 @@ "cfg", "bus_master", "bus_slave"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie2: pcie@610000 { @@ -2032,6 +2052,16 @@ "cfg", "bus_master", "bus_slave"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi index 876c6921ddf0..d8cc0d729e99 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi @@ -98,30 +98,35 @@ gpio-keys { compatible = "gpio-keys"; label = "Side buttons"; + pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &vol_up_n>; pinctrl-names = "default"; - pinctrl-0 = <&vol_down_n &focus_n &snapshot_n>; - button-vol-down { - label = "Volume Down"; - gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>; - linux,input-type = <EV_KEY>; - linux,code = <KEY_VOLUMEDOWN>; - wakeup-source; + button-camera-focus { + label = "Camera Focus"; + gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>; + linux,code = <KEY_CAMERA_FOCUS>; debounce-interval = <15>; }; button-camera-snapshot { label = "Camera Snapshot"; gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>; - linux,input-type = <EV_KEY>; linux,code = <KEY_CAMERA>; debounce-interval = <15>; }; - button-camera-focus { - label = "Camera Focus"; - gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>; - linux,input-type = <EV_KEY>; - linux,code = <KEY_CAMERA_FOCUS>; + button-vol-down { + label = "Volume Down"; + gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + wakeup-source; + debounce-interval = <15>; + }; + + button-vol-up { + label = "Volume Up"; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; debounce-interval = <15>; }; }; @@ -345,6 +350,14 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; }; + vol_up_n: vol-up-n-state { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-pull-up; + input-enable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; + focus_n: focus-n-state { pins = "gpio7"; function = PMIC_GPIO_FUNC_NORMAL; @@ -405,9 +418,33 @@ }; }; -&pm8998_resin { - linux,code = <KEY_VOLUMEUP>; +&pmi8998_lpg { + qcom,power-source = <1>; + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@4 { + reg = <4>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@5 { + reg = <5>; + color = <LED_COLOR_ID_RED>; + }; + }; }; &qusb2phy { diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 4dfe2d09ac28..d795b2bbe133 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -972,6 +972,16 @@ power-domains = <&gcc PCIE_0_GDSC>; iommu-map = <0x100 &anoc1_smmu 0x1480 1>; perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie_phy: phy@1c06000 { diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi index 11158c2bd524..b20a639cddf3 100644 --- a/arch/arm64/boot/dts/qcom/pm6150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi @@ -71,8 +71,8 @@ }; pm6150_typec: typec@1500 { - compatible = "qcom,pm6150-typec, - qcom,pm8150b-typec"; + compatible = "qcom,pm6150-typec", + "qcom,pm8150b-typec"; reg = <0x1500>, <0x1700>; interrupts = <0x0 0x15 0x00 IRQ_TYPE_EDGE_RISING>, <0x0 0x15 0x01 IRQ_TYPE_EDGE_BOTH>, diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi index d13a1ab7c20b..0fce45276e5c 100644 --- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi @@ -118,6 +118,16 @@ status = "disabled"; }; + pm6150l_lpg: pwm { + compatible = "qcom,pm6150l-lpg", "qcom,pm8150l-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + + status = "disabled"; + }; + pm6150l_wled: leds@d800 { compatible = "qcom,pm6150l-wled"; reg = <0xd800>, <0xd900>; diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi index d3cd68190a17..106110a9f551 100644 --- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi +++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi @@ -694,10 +694,31 @@ clock-output-names = "usb3_phy_pipe_clk_src"; #phy-cells = <0>; + orientation-switch; qcom,tcsr-reg = <&tcsr_regs 0xb244>; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_dwc3_ss>; + }; + }; + }; }; system_noc: interconnect@1880000 { @@ -1380,6 +1401,27 @@ snps,usb3_lpm_capable; maximum-speed = "super-speed"; dr_mode = "otg"; + usb-role-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_dwc3_ss: endpoint { + remote-endpoint = <&usb_qmpphy_usb_ss_in>; + }; + }; + }; }; }; @@ -1858,7 +1900,7 @@ compatible = "qcom,qcm2290-cpufreq-hw", "qcom,cpufreq-hw"; reg = <0x0 0x0f521000 0x0 0x1000>; reg-names = "freq-domain0"; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&lmh_cluster 0>; interrupt-names = "dcvsh-irq-0"; clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>; clock-names = "xo", "alternate"; @@ -1866,6 +1908,18 @@ #freq-domain-cells = <1>; #clock-cells = <1>; }; + + lmh_cluster: lmh@f550800 { + compatible = "qcom,qcm2290-lmh", "qcom,sm8150-lmh"; + reg = <0x0 0x0f550800 0x0 0x400>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + cpus = <&CPU0>; + qcom,lmh-temp-arm-millicelsius = <65000>; + qcom,lmh-temp-low-millicelsius = <94500>; + qcom,lmh-temp-high-millicelsius = <95000>; + interrupt-controller; + #interrupt-cells = <1>; + }; }; thermal-zones { diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts index 4ff9fc24e50e..f3432701945f 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts @@ -77,6 +77,8 @@ #address-cells = <1>; #size-cells = <0>; + orientation-gpios = <&tlmm 140 GPIO_ACTIVE_HIGH>; + connector@0 { compatible = "usb-c-connector"; reg = <0>; diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts index e4bfad50a669..47ca2d000341 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts @@ -9,7 +9,9 @@ #define PM7250B_SID 8 #define PM7250B_SID1 9 +#include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sc7280.dtsi" #include "pm7250b.dtsi" @@ -35,10 +37,45 @@ serial0 = &uart5; }; + pm8350c_pwm_backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pm8350c_pwm 3 65535>; + enable-gpios = <&pm8350c_gpios 7 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pmic_lcd_bl_en>; + pinctrl-names = "default"; + }; + chosen { stdout-path = "serial0:115200n8"; }; + lcd_disp_bias: regulator-lcd-disp-bias { + compatible = "regulator-fixed"; + regulator-name = "lcd_disp_bias"; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; + gpio = <&pm7250b_gpios 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-0 = <&lcd_disp_bias_en>; + pinctrl-names = "default"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&key_vol_up_default>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume_up"; + gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; + debounce-interval = <15>; + linux,can-disable; + }; + }; + reserved-memory { xbl_mem: xbl@80700000 { reg = <0x0 0x80700000 0x0 0x100000>; @@ -158,129 +195,151 @@ vdd-l14-l16-supply = <&vreg_s8b_1p272>; vreg_s1b_1p872: smps1 { + regulator-name = "vreg_s1b_1p872"; regulator-min-microvolt = <1840000>; regulator-max-microvolt = <2040000>; }; vreg_s2b_0p876: smps2 { + regulator-name = "vreg_s2b_0p876"; regulator-min-microvolt = <570070>; regulator-max-microvolt = <1050000>; }; vreg_s7b_0p972: smps7 { + regulator-name = "vreg_s7b_0p972"; regulator-min-microvolt = <535000>; regulator-max-microvolt = <1120000>; }; vreg_s8b_1p272: smps8 { + regulator-name = "vreg_s8b_1p272"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1500000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>; }; vreg_l1b_0p912: ldo1 { + regulator-name = "vreg_l1b_0p912"; regulator-min-microvolt = <825000>; regulator-max-microvolt = <925000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l2b_3p072: ldo2 { + regulator-name = "vreg_l2b_3p072"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l3b_0p504: ldo3 { + regulator-name = "vreg_l3b_0p504"; regulator-min-microvolt = <312000>; regulator-max-microvolt = <910000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l4b_0p752: ldo4 { + regulator-name = "vreg_l4b_0p752"; regulator-min-microvolt = <752000>; regulator-max-microvolt = <820000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; reg_l5b_0p752: ldo5 { + regulator-name = "reg_l5b_0p752"; regulator-min-microvolt = <552000>; regulator-max-microvolt = <832000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l6b_1p2: ldo6 { + regulator-name = "vreg_l6b_1p2"; regulator-min-microvolt = <1140000>; regulator-max-microvolt = <1260000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l7b_2p952: ldo7 { + regulator-name = "vreg_l7b_2p952"; regulator-min-microvolt = <2400000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l8b_0p904: ldo8 { + regulator-name = "vreg_l8b_0p904"; regulator-min-microvolt = <870000>; regulator-max-microvolt = <970000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l9b_1p2: ldo9 { + regulator-name = "vreg_l9b_1p2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1304000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l11b_1p504: ldo11 { + regulator-name = "vreg_l11b_1p504"; regulator-min-microvolt = <1504000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l12b_0p751: ldo12 { + regulator-name = "vreg_l12b_0p751"; regulator-min-microvolt = <751000>; regulator-max-microvolt = <824000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l13b_0p53: ldo13 { + regulator-name = "vreg_l13b_0p53"; regulator-min-microvolt = <530000>; regulator-max-microvolt = <824000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l14b_1p08: ldo14 { + regulator-name = "vreg_l14b_1p08"; regulator-min-microvolt = <1080000>; regulator-max-microvolt = <1304000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l15b_0p765: ldo15 { + regulator-name = "vreg_l15b_0p765"; regulator-min-microvolt = <765000>; regulator-max-microvolt = <1020000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l16b_1p1: ldo16 { + regulator-name = "vreg_l16b_1p1"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1300000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l17b_1p7: ldo17 { + regulator-name = "vreg_l17b_1p7"; regulator-min-microvolt = <1700000>; regulator-max-microvolt = <1900000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l18b_1p8: ldo18 { + regulator-name = "vreg_l18b_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l19b_1p8: ldo19 { + regulator-name = "vreg_l19b_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; @@ -312,116 +371,217 @@ vdd-bob-supply = <&vph_pwr>; vreg_s1c_2p19: smps1 { + regulator-name = "vreg_s1c_2p19"; regulator-min-microvolt = <2190000>; regulator-max-microvolt = <2210000>; }; vreg_s2c_0p752: smps2 { + regulator-name = "vreg_s2c_0p752"; regulator-min-microvolt = <750000>; regulator-max-microvolt = <800000>; }; vreg_s5c_0p752: smps5 { + regulator-name = "vreg_s5c_0p752"; regulator-min-microvolt = <465000>; regulator-max-microvolt = <1050000>; }; vreg_s7c_0p752: smps7 { + regulator-name = "vreg_s7c_0p752"; regulator-min-microvolt = <465000>; regulator-max-microvolt = <800000>; }; vreg_s9c_1p084: smps9 { + regulator-name = "vreg_s9c_1p084"; regulator-min-microvolt = <1010000>; regulator-max-microvolt = <1170000>; }; vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1980000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l2c_1p62: ldo2 { + regulator-name = "vreg_l2c_1p62"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <1980000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l3c_2p8: ldo3 { + regulator-name = "vreg_l3c_2p8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3540000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l4c_1p62: ldo4 { + regulator-name = "vreg_l4c_1p62"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <3300000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l5c_1p62: ldo5 { + regulator-name = "vreg_l5c_1p62"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <3300000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l6c_2p96: ldo6 { + regulator-name = "vreg_l6c_2p96"; regulator-min-microvolt = <1650000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l7c_3p0: ldo7 { + regulator-name = "vreg_l7c_3p0"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l8c_1p62: ldo8 { + regulator-name = "vreg_l8c_1p62"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l9c_2p96: ldo9 { + regulator-name = "vreg_l9c_2p96"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <35440000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l10c_0p88: ldo10 { + regulator-name = "vreg_l10c_0p88"; regulator-min-microvolt = <720000>; regulator-max-microvolt = <1050000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l11c_2p8: ldo11 { + regulator-name = "vreg_l11c_2p8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l12c_1p65: ldo12 { + regulator-name = "vreg_l12c_1p65"; regulator-min-microvolt = <1650000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l13c_2p7: ldo13 { + regulator-name = "vreg_l13c_2p7"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_bob_3p296: bob { + regulator-name = "vreg_bob_3p296"; regulator-min-microvolt = <3008000>; regulator-max-microvolt = <3960000>; }; }; }; +&mdss { + status = "okay"; +}; + +&mdss_dsi { + vdda-supply = <&vreg_l6b_1p2>; + status = "okay"; + + panel@0 { + compatible = "novatek,nt36672e"; + reg = <0>; + + reset-gpios = <&tlmm 44 GPIO_ACTIVE_HIGH>; + + vddi-supply = <&vreg_l8c_1p62>; + avdd-supply = <&lcd_disp_bias>; + avee-supply = <&lcd_disp_bias>; + + backlight = <&pm8350c_pwm_backlight>; + + port { + panel0_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel0_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi_phy { + vdds-supply = <&vreg_l10c_0p88>; + status = "okay"; +}; + +&pm7250b_gpios { + lcd_disp_bias_en: lcd-disp-bias-en-state { + pins = "gpio2"; + function = "func1"; + bias-disable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + input-disable; + output-enable; + power-source = <0>; + }; +}; + +&pm8350c_gpios { + pmic_lcd_bl_en: pmic-lcd-bl-en-state { + pins = "gpio7"; + function = "normal"; + bias-disable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + output-low; + power-source = <0>; + }; + + pmic_lcd_bl_pwm: pmic-lcd-bl-pwm-state { + pins = "gpio8"; + function = "func1"; + bias-disable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + output-low; + power-source = <0>; + }; +}; + +&pm7325_gpios { + key_vol_up_default: key-vol-up-state { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; +}; + &pm8350c_pwm { + pinctrl-0 = <&pmic_lcd_bl_pwm>; + pinctrl-names = "default"; status = "okay"; multi-led { @@ -448,10 +608,39 @@ }; }; +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + &qupv3_id_0 { status = "okay"; }; +&remoteproc_adsp { + firmware-name = "qcom/qcm6490/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/qcm6490/cdsp.mbn"; + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/qcm6490/modem.mbn"; + status = "okay"; +}; + +&remoteproc_wpss { + firmware-name = "qcom/qcm6490/wpss.mbn"; + status = "okay"; +}; + &sdhc_1 { non-removable; no-sd; diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index a05d0234f7fc..ac451f378056 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -1516,6 +1516,16 @@ phy-names = "pciephy"; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts index 97824c769ba3..a085ff5b5fb2 100644 --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts @@ -17,7 +17,6 @@ #include "pmk8350.dtsi" /delete-node/ &ipa_fw_mem; -/delete-node/ &remoteproc_mpss; /delete-node/ &rmtfs_mem; /delete-node/ &adsp_mem; /delete-node/ &cdsp_mem; @@ -39,6 +38,20 @@ stdout-path = "serial0:115200n8"; }; + dp-connector { + compatible = "dp-connector"; + label = "DP"; + type = "mini"; + + hpd-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>; + + port { + dp_connector_in: endpoint { + remote-endpoint = <&mdss_edp_out>; + }; + }; + }; + reserved-memory { xbl_mem: xbl@80700000 { reg = <0x0 0x80700000 0x0 0x100000>; @@ -121,6 +134,49 @@ }; }; + pmic-glink { + compatible = "qcom,qcm6490-pmic-glink", "qcom,pmic-glink"; + + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&redriver_usb_con_ss>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_sbu_in: endpoint { + remote-endpoint = <&redriver_usb_con_sbu>; + }; + }; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -153,129 +209,154 @@ vdd-l14-l16-supply = <&vreg_s8b_1p272>; vreg_s1b_1p872: smps1 { + regulator-name = "vreg_s1b_1p872"; regulator-min-microvolt = <1840000>; regulator-max-microvolt = <2040000>; }; vreg_s2b_0p876: smps2 { + regulator-name = "vreg_s2b_0p876"; regulator-min-microvolt = <570070>; regulator-max-microvolt = <1050000>; }; vreg_s7b_0p972: smps7 { + regulator-name = "vreg_s7b_0p972"; regulator-min-microvolt = <535000>; regulator-max-microvolt = <1120000>; }; vreg_s8b_1p272: smps8 { + regulator-name = "vreg_s8b_1p272"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1500000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>; }; vreg_l1b_0p912: ldo1 { + regulator-name = "vreg_l1b_0p912"; regulator-min-microvolt = <825000>; regulator-max-microvolt = <925000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l2b_3p072: ldo2 { + regulator-name = "vreg_l2b_3p072"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l3b_0p504: ldo3 { + regulator-name = "vreg_l3b_0p504"; regulator-min-microvolt = <312000>; regulator-max-microvolt = <910000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l4b_0p752: ldo4 { + regulator-name = "vreg_l4b_0p752"; regulator-min-microvolt = <752000>; regulator-max-microvolt = <820000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; reg_l5b_0p752: ldo5 { + regulator-name = "reg_l5b_0p752"; regulator-min-microvolt = <552000>; regulator-max-microvolt = <832000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l6b_1p2: ldo6 { + regulator-name = "vreg_l6b_1p2"; regulator-min-microvolt = <1140000>; regulator-max-microvolt = <1260000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l7b_2p952: ldo7 { - regulator-min-microvolt = <2400000>; - regulator-max-microvolt = <3544000>; + regulator-name = "vreg_l7b_2p952"; + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <2952000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l8b_0p904: ldo8 { + regulator-name = "vreg_l8b_0p904"; regulator-min-microvolt = <870000>; regulator-max-microvolt = <970000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l9b_1p2: ldo9 { + regulator-name = "vreg_l9b_1p2"; regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1304000>; + regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l11b_1p504: ldo11 { + regulator-name = "vreg_l11b_1p504"; regulator-min-microvolt = <1504000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l12b_0p751: ldo12 { + regulator-name = "vreg_l12b_0p751"; regulator-min-microvolt = <751000>; regulator-max-microvolt = <824000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l13b_0p53: ldo13 { + regulator-name = "vreg_l13b_0p53"; regulator-min-microvolt = <530000>; regulator-max-microvolt = <824000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l14b_1p08: ldo14 { + regulator-name = "vreg_l14b_1p08"; regulator-min-microvolt = <1080000>; regulator-max-microvolt = <1304000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l15b_0p765: ldo15 { + regulator-name = "vreg_l15b_0p765"; regulator-min-microvolt = <765000>; regulator-max-microvolt = <1020000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l16b_1p1: ldo16 { + regulator-name = "vreg_l16b_1p1"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1300000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l17b_1p7: ldo17 { + regulator-name = "vreg_l17b_1p7"; regulator-min-microvolt = <1700000>; regulator-max-microvolt = <1900000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l18b_1p8: ldo18 { + regulator-name = "vreg_l18b_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l19b_1p8: ldo19 { + regulator-name = "vreg_l19b_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; @@ -304,109 +385,128 @@ vdd-bob-supply = <&vph_pwr>; vreg_s1c_2p19: smps1 { + regulator-name = "vreg_s1c_2p19"; regulator-min-microvolt = <2190000>; regulator-max-microvolt = <2210000>; }; vreg_s2c_0p752: smps2 { + regulator-name = "vreg_s2c_0p752"; regulator-min-microvolt = <750000>; regulator-max-microvolt = <800000>; }; vreg_s5c_0p752: smps5 { + regulator-name = "vreg_s5c_0p752"; regulator-min-microvolt = <465000>; regulator-max-microvolt = <1050000>; }; vreg_s7c_0p752: smps7 { + regulator-name = "vreg_s7c_0p752"; regulator-min-microvolt = <465000>; regulator-max-microvolt = <800000>; }; vreg_s9c_1p084: smps9 { + regulator-name = "vreg_s9c_1p084"; regulator-min-microvolt = <1010000>; regulator-max-microvolt = <1170000>; }; vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1980000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l2c_1p62: ldo2 { + regulator-name = "vreg_l2c_1p62"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <1980000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l3c_2p8: ldo3 { + regulator-name = "vreg_l3c_2p8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3540000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l4c_1p62: ldo4 { + regulator-name = "vreg_l4c_1p62"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <3300000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l5c_1p62: ldo5 { + regulator-name = "vreg_l5c_1p62"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <3300000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l6c_2p96: ldo6 { + regulator-name = "vreg_l6c_2p96"; regulator-min-microvolt = <1650000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l7c_3p0: ldo7 { + regulator-name = "vreg_l7c_3p0"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l8c_1p62: ldo8 { + regulator-name = "vreg_l8c_1p62"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l9c_2p96: ldo9 { + regulator-name = "vreg_l9c_2p96"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <35440000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l10c_0p88: ldo10 { + regulator-name = "vreg_l10c_0p88"; regulator-min-microvolt = <720000>; regulator-max-microvolt = <1050000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l11c_2p8: ldo11 { + regulator-name = "vreg_l11c_2p8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l12c_1p65: ldo12 { + regulator-name = "vreg_l12c_1p65"; regulator-min-microvolt = <1650000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l13c_2p7: ldo13 { + regulator-name = "vreg_l13c_2p7"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_bob_3p296: bob { + regulator-name = "vreg_bob_3p296"; regulator-min-microvolt = <3008000>; regulator-max-microvolt = <3960000>; }; @@ -430,10 +530,102 @@ <GCC_WPSS_RSCP_CLK>; }; +&i2c1 { + status = "okay"; + + typec-mux@1c { + compatible = "onnn,nb7vpq904m"; + reg = <0x1c>; + + vcc-supply = <&vreg_l18b_1p8>; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + redriver_usb_con_ss: endpoint { + remote-endpoint = <&pmic_glink_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + redriver_phy_con_ss: endpoint { + remote-endpoint = <&usb_dp_qmpphy_out>; + data-lanes = <0 1 2 3>; + }; + }; + + port@2 { + reg = <2>; + + redriver_usb_con_sbu: endpoint { + remote-endpoint = <&pmic_glink_sbu_in>; + }; + }; + }; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp { + status = "okay"; +}; + +&mdss_dp_out { + data-lanes = <0 1>; + remote-endpoint = <&usb_dp_qmpphy_dp_in>; +}; + +&mdss_edp { + status = "okay"; +}; + +&mdss_edp_out { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + + remote-endpoint = <&dp_connector_in>; +}; + +&mdss_edp_phy { + status = "okay"; +}; + &qupv3_id_0 { status = "okay"; }; +&remoteproc_adsp { + firmware-name = "qcom/qcs6490/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/qcs6490/cdsp.mbn"; + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/qcs6490/modem.mdt"; + status = "okay"; +}; + +&remoteproc_wpss { + firmware-name = "qcom/qcs6490/wpss.mbn"; + status = "okay"; +}; + &tlmm { gpio-reserved-ranges = <32 2>, /* ADSP */ <48 4>; /* NFC */ @@ -449,7 +641,16 @@ }; &usb_1_dwc3 { - dr_mode = "peripheral"; + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; }; &usb_1_hsphy { @@ -464,9 +665,49 @@ vdda-phy-supply = <&vreg_l6b_1p2>; vdda-pll-supply = <&vreg_l1b_0p912>; + orientation-switch; + + status = "okay"; +}; + +&usb_dp_qmpphy_out { + remote-endpoint = <&redriver_phy_con_ss>; +}; + +&usb_dp_qmpphy_usb_ss_in { + remote-endpoint = <&usb_1_dwc3_ss>; +}; + +&usb_dp_qmpphy_dp_in { + remote-endpoint = <&mdss_dp_out>; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l7b_2p952>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l9b_1p2>; + vccq-max-microamp = <900000>; + vccq2-supply = <&vreg_l9b_1p2>; + vccq2-max-microamp = <900000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l10c_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + status = "okay"; }; &wifi { memory-region = <&wlan_fw_mem>; }; + +/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ + +&edp_hot_plug_det { + function = "gpio"; + bias-disable; +}; diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts index 6e9dd0312adc..bb5191422660 100644 --- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts +++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts @@ -262,6 +262,46 @@ status = "okay"; }; +&pm4125_typec { + status = "okay"; + + connector { + compatible = "usb-c-connector"; + + power-role = "dual"; + data-role = "dual"; + self-powered; + + typec-power-opmode = "default"; + pd-disable; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + pm4125_hs_in: endpoint { + remote-endpoint = <&usb_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + pm4125_ss_in: endpoint { + remote-endpoint = <&usb_qmpphy_out>; + }; + }; + }; + }; +}; + +&pm4125_vbus { + regulator-min-microamp = <500000>; + regulator-max-microamp = <500000>; + status = "okay"; +}; + &qupv3_id_0 { status = "okay"; }; @@ -535,14 +575,8 @@ status = "okay"; }; -&usb_qmpphy { - vdda-phy-supply = <&pm4125_l12>; - vdda-pll-supply = <&pm4125_l13>; - status = "okay"; -}; - -&usb_dwc3 { - dr_mode = "host"; +&usb_dwc3_hs { + remote-endpoint = <&pm4125_hs_in>; }; &usb_hsphy { @@ -552,12 +586,23 @@ status = "okay"; }; +&usb_qmpphy { + vdda-phy-supply = <&pm4125_l12>; + vdda-pll-supply = <&pm4125_l13>; + status = "okay"; +}; + +&usb_qmpphy_out { + remote-endpoint = <&pm4125_ss_in>; +}; + &wifi { vdd-0.8-cx-mx-supply = <&pm4125_l7>; vdd-1.8-xo-supply = <&pm4125_l13>; vdd-1.3-rfa-supply = <&pm4125_l10>; vdd-3.3-ch0-supply = <&pm4125_l22>; qcom,ath10k-calibration-variant = "Thundercomm_RB1"; + firmware-name = "qcm2290"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts index 696d6d43c56b..2c39bb1b97db 100644 --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts @@ -678,6 +678,7 @@ vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; vdd-3.3-ch0-supply = <&vreg_l23a_3p3>; qcom,ath10k-calibration-variant = "Thundercomm_RB2"; + firmware-name = "qrb4210"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts index 5e4287f8c8cd..4f805c47fbfd 100644 --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts @@ -283,7 +283,7 @@ vreg_l13c_2p96: ldo13 { regulator-name = "vreg_l13c_2p96"; - regulator-min-microvolt = <2504000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi index 231cea1f0fa8..31de73594839 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi @@ -3677,6 +3677,16 @@ phy-names = "pciephy"; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie0_phy: phy@1c04000 { @@ -3777,6 +3787,16 @@ phy-names = "pciephy"; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie1_phy: phy@1c14000 { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index 5260c63db007..8513be297120 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -1167,6 +1167,7 @@ ap_spi_fp: &spi10 { }; &pm6150l_gpios { + status = "disabled"; /* No GPIOs are consumed or configured */ gpio-line-names = "AP_SUSPEND", "", "", diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 2b481e20ae38..4774a859bd7e 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -1585,9 +1585,12 @@ compatible = "qcom,sc7180-qmp-ufs-phy", "qcom,sm7150-qmp-ufs-phy"; reg = <0 0x01d87000 0 0x1000>; - clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; - clock-names = "ref", "ref_aux"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_MEM_CLKREF_CLK>; + clock-names = "ref", + "ref_aux", + "qref"; power-domains = <&gcc UFS_PHY_GDSC>; resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; @@ -2309,6 +2312,7 @@ compatible = "qcom,sc7180-dcc", "qcom,dcc"; reg = <0x0 0x010a2000 0x0 0x1000>, <0x0 0x010ae000 0x0 0x2000>; + status = "disabled"; }; stm@6002000 { diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 7e7f0f0fb41b..cea294a4ecfb 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -2273,6 +2273,16 @@ <0x100 &apps_smmu 0x1c81 0x1>; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie1_phy: phy@1c0e000 { @@ -2352,6 +2362,8 @@ <0 0>, <0 0>, <0 0>; + qcom,ice = <&ice>; + status = "disabled"; }; @@ -2374,6 +2386,13 @@ status = "disabled"; }; + ice: crypto@1d88000 { + compatible = "qcom,sc7280-inline-crypto-engine", + "qcom,inline-crypto-engine"; + reg = <0 0x01d88000 0 0x8000>; + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + }; + cryptobam: dma-controller@1dc4000 { compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; reg = <0x0 0x01dc4000 0x0 0x28000>; @@ -4458,6 +4477,11 @@ opp-hz = /bits/ 64 <506666667>; required-opps = <&rpmhpd_opp_nom>; }; + + opp-608000000 { + opp-hz = /bits/ 64 <608000000>; + required-opps = <&rpmhpd_opp_turbo>; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts index 0c22f3efec20..6af99116c715 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts +++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts @@ -51,6 +51,8 @@ #address-cells = <1>; #size-cells = <0>; + orientation-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>, + <&tlmm 58 GPIO_ACTIVE_HIGH>; connector@0 { compatible = "usb-c-connector"; @@ -329,12 +331,18 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; }; vreg_l10e_2p9: ldo10 { regulator-min-microvolt = <2904000>; regulator-max-microvolt = <2904000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; }; vreg_l16e_3p0: ldo16 { @@ -350,49 +358,58 @@ zap-shader { memory-region = <&gpu_mem>; - firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn"; + firmware-name = "qcom/sc8180x/LENOVO/82AK/qcdxkmsuc8180.mbn"; }; }; &i2c1 { clock-frequency = <100000>; - pinctrl-0 = <&i2c1_active>, <&i2c1_hid_active>; + pinctrl-0 = <&i2c1_active>; pinctrl-names = "default"; status = "okay"; - hid@10 { + touchscreen@10 { compatible = "hid-over-i2c"; reg = <0x10>; hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&ts_int_default>; + pinctrl-names = "default"; }; }; &i2c7 { - clock-frequency = <100000>; + clock-frequency = <1000000>; - pinctrl-0 = <&i2c7_active>, <&i2c7_hid_active>; + pinctrl-0 = <&i2c7_active>; pinctrl-names = "default"; status = "okay"; - hid@5 { + keyboard@5 { compatible = "hid-over-i2c"; reg = <0x5>; hid-descr-addr = <0x20>; interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&kb_int_default>; + pinctrl-names = "default"; }; - hid@2c { + touchpad@2c { compatible = "hid-over-i2c"; reg = <0x2c>; hid-descr-addr = <0x20>; interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&tp_int_default>; + pinctrl-names = "default"; }; }; @@ -669,14 +686,6 @@ drive-strength = <2>; }; - i2c1_hid_active: i2c1-hid-active-state { - pins = "gpio122"; - function = "gpio"; - - bias-pull-up; - drive-strength = <2>; - }; - i2c7_active: i2c7-active-state { pins = "gpio98", "gpio99"; function = "qup7"; @@ -685,8 +694,8 @@ drive-strength = <2>; }; - i2c7_hid_active: i2c7-hid-active-state { - pins = "gpio37", "gpio24"; + kb_int_default: kb-int-default-state { + pins = "gpio37"; function = "gpio"; bias-pull-up; @@ -718,6 +727,22 @@ }; }; + tp_int_default: tp-int-default-state { + pins = "gpio24"; + function = "gpio"; + + bias-pull-up; + drive-strength = <2>; + }; + + ts_int_default: ts-int-default-state { + pins = "gpio122"; + function = "gpio"; + + bias-pull-up; + drive-strength = <2>; + }; + usbprim_sbu_default: usbprim-sbu-state { oe-n-pins { pins = "gpio152"; diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi index 32afc78d5b76..6d5878f3b26d 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi @@ -1777,6 +1777,16 @@ dma-coherent; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie0_phy: phy@1c06000 { @@ -1888,6 +1898,16 @@ dma-coherent; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie3_phy: phy@1c0c000 { @@ -2000,6 +2020,16 @@ dma-coherent; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie1_phy: phy@1c16000 { @@ -2112,6 +2142,16 @@ dma-coherent; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie2_phy: phy@1c1c000 { @@ -2225,7 +2265,6 @@ gpu: gpu@2c00000 { compatible = "qcom,adreno-680.1", "qcom,adreno"; - #stream-id-cells = <16>; reg = <0 0x02c00000 0 0x40000>; reg-names = "kgsl_3d0_reg_memory"; @@ -2805,7 +2844,7 @@ power-domains = <&rpmhpd SC8180X_MMCX>; interrupt-parent = <&mdss>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0>; ports { #address-cells = <1>; @@ -2878,7 +2917,7 @@ reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <4>; clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, @@ -2964,7 +3003,7 @@ reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <5>; clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, @@ -3030,7 +3069,8 @@ reg = <0 0xae90000 0 0x200>, <0 0xae90200 0 0x200>, <0 0xae90400 0 0x600>, - <0 0xae90a00 0 0x400>; + <0 0xae90a00 0 0x400>, + <0 0xae91000 0 0x400>; interrupt-parent = <&mdss>; interrupts = <12>; clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, @@ -3106,7 +3146,8 @@ reg = <0 0xae98000 0 0x200>, <0 0xae98200 0 0x200>, <0 0xae98400 0 0x600>, - <0 0xae98a00 0 0x400>; + <0 0xae98a00 0 0x400>, + <0 0xae99000 0 0x400>; interrupt-parent = <&mdss>; interrupts = <13>; clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index 15ae94c1602d..f325066e24d8 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -100,6 +100,8 @@ #address-cells = <1>; #size-cells = <0>; + orientation-gpios = <&tlmm 166 GPIO_ACTIVE_HIGH>, + <&tlmm 49 GPIO_ACTIVE_HIGH>; connector@0 { compatible = "usb-c-connector"; @@ -731,22 +733,14 @@ pinctrl-0 = <&pcie4_default>; status = "okay"; +}; - pcie@0 { - device_type = "pci"; - reg = <0x0 0x0 0x0 0x0 0x0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - bus-range = <0x01 0xff>; - - wifi@0 { - compatible = "pci17cb,1103"; - reg = <0x10000 0x0 0x0 0x0 0x0>; +&pcie4_port0 { + wifi@0 { + compatible = "pci17cb,1103"; + reg = <0x10000 0x0 0x0 0x0 0x0>; - qcom,ath11k-calibration-variant = "LE_X13S"; - }; + qcom,ath11k-calibration-variant = "LE_X13S"; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index a5b194813079..0403811264d8 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -50,7 +50,8 @@ reg = <0x0 0x0>; clocks = <&cpufreq_hw 0>; enable-method = "psci"; - capacity-dmips-mhz = <602>; + capacity-dmips-mhz = <981>; + dynamic-power-coefficient = <549>; next-level-cache = <&L2_0>; power-domains = <&CPU_PD0>; power-domain-names = "psci"; @@ -77,7 +78,8 @@ reg = <0x0 0x100>; clocks = <&cpufreq_hw 0>; enable-method = "psci"; - capacity-dmips-mhz = <602>; + capacity-dmips-mhz = <981>; + dynamic-power-coefficient = <549>; next-level-cache = <&L2_100>; power-domains = <&CPU_PD1>; power-domain-names = "psci"; @@ -99,7 +101,8 @@ reg = <0x0 0x200>; clocks = <&cpufreq_hw 0>; enable-method = "psci"; - capacity-dmips-mhz = <602>; + capacity-dmips-mhz = <981>; + dynamic-power-coefficient = <549>; next-level-cache = <&L2_200>; power-domains = <&CPU_PD2>; power-domain-names = "psci"; @@ -121,7 +124,8 @@ reg = <0x0 0x300>; clocks = <&cpufreq_hw 0>; enable-method = "psci"; - capacity-dmips-mhz = <602>; + capacity-dmips-mhz = <981>; + dynamic-power-coefficient = <549>; next-level-cache = <&L2_300>; power-domains = <&CPU_PD3>; power-domain-names = "psci"; @@ -144,6 +148,7 @@ clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <590>; next-level-cache = <&L2_400>; power-domains = <&CPU_PD4>; power-domain-names = "psci"; @@ -166,6 +171,7 @@ clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <590>; next-level-cache = <&L2_500>; power-domains = <&CPU_PD5>; power-domain-names = "psci"; @@ -188,6 +194,7 @@ clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <590>; next-level-cache = <&L2_600>; power-domains = <&CPU_PD6>; power-domain-names = "psci"; @@ -210,6 +217,7 @@ clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <590>; next-level-cache = <&L2_700>; power-domains = <&CPU_PD7>; power-domain-names = "psci"; @@ -300,6 +308,7 @@ scm: scm { compatible = "qcom,scm-sc8280xp", "qcom,scm"; interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; + qcom,dload-mode = <&tcsr 0x13000>; }; }; @@ -862,6 +871,18 @@ #mbox-cells = <2>; }; + qfprom: efuse@784000 { + compatible = "qcom,sc8280xp-qfprom", "qcom,qfprom"; + reg = <0 0x00784000 0 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + + gpu_speed_bin: gpu-speed-bin@18b { + reg = <0x18b 0x1>; + bits = <5 3>; + }; + }; + qup2: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0 0x008c0000 0 0x2000>; @@ -1731,6 +1752,8 @@ linux,pci-domain = <6>; num-lanes = <1>; + msi-map = <0x0 &its 0xe0000 0x10000>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, @@ -1774,11 +1797,22 @@ reset-names = "pci"; power-domains = <&gcc PCIE_4_GDSC>; + required-opps = <&rpmhpd_opp_nom>; phys = <&pcie4_phy>; phy-names = "pciephy"; status = "disabled"; + + pcie4_port0: pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie4_phy: phy@1c06000 { @@ -1831,6 +1865,8 @@ linux,pci-domain = <5>; num-lanes = <2>; + msi-map = <0x0 &its 0xd0000 0x10000>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, @@ -1872,11 +1908,22 @@ reset-names = "pci"; power-domains = <&gcc PCIE_3B_GDSC>; + required-opps = <&rpmhpd_opp_nom>; phys = <&pcie3b_phy>; phy-names = "pciephy"; status = "disabled"; + + pcie3b_port0: pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie3b_phy: phy@1c0e000 { @@ -1929,6 +1976,8 @@ linux,pci-domain = <4>; num-lanes = <4>; + msi-map = <0x0 &its 0xc0000 0x10000>; + interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, @@ -1970,11 +2019,22 @@ reset-names = "pci"; power-domains = <&gcc PCIE_3A_GDSC>; + required-opps = <&rpmhpd_opp_nom>; phys = <&pcie3a_phy>; phy-names = "pciephy"; status = "disabled"; + + pcie3a_port0: pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie3a_phy: phy@1c14000 { @@ -2030,6 +2090,8 @@ linux,pci-domain = <3>; num-lanes = <2>; + msi-map = <0x0 &its 0xb0000 0x10000>; + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, @@ -2071,11 +2133,22 @@ reset-names = "pci"; power-domains = <&gcc PCIE_2B_GDSC>; + required-opps = <&rpmhpd_opp_nom>; phys = <&pcie2b_phy>; phy-names = "pciephy"; status = "disabled"; + + pcie2b_port0: pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie2b_phy: phy@1c1e000 { @@ -2128,6 +2201,8 @@ linux,pci-domain = <2>; num-lanes = <4>; + msi-map = <0x0 &its 0xa0000 0x10000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 524 IRQ_TYPE_LEVEL_HIGH>, @@ -2169,11 +2244,22 @@ reset-names = "pci"; power-domains = <&gcc PCIE_2A_GDSC>; + required-opps = <&rpmhpd_opp_nom>; phys = <&pcie2a_phy>; phy-names = "pciephy"; status = "disabled"; + + pcie2a_port0: pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie2a_phy: phy@1c24000 { @@ -3361,10 +3447,12 @@ assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>, <&pdc 14 IRQ_TYPE_EDGE_BOTH>, <&pdc 15 IRQ_TYPE_EDGE_BOTH>, <&pdc 138 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "pwr_event", + "hs_phy_irq", "dp_hs_phy_irq", "dm_hs_phy_irq", "ss_phy_irq"; @@ -3421,10 +3509,12 @@ assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>, <&pdc 12 IRQ_TYPE_EDGE_BOTH>, <&pdc 13 IRQ_TYPE_EDGE_BOTH>, <&pdc 136 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "pwr_event", + "hs_phy_irq", "dp_hs_phy_irq", "dm_hs_phy_irq", "ss_phy_irq"; @@ -4448,6 +4538,11 @@ #thermal-sensor-cells = <1>; }; + restart@c264000 { + compatible = "qcom,pshold"; + reg = <0 0x0c264000 0 0x4>; + }; + tsens1: thermal-sensor@c265000 { compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2"; reg = <0 0x0c265000 0 0x1ff>, /* TM */ @@ -4799,7 +4894,7 @@ #size-cells = <2>; ranges; - msi-controller@17a40000 { + its: msi-controller@17a40000 { compatible = "arm,gic-v3-its"; reg = <0 0x17a40000 0 0x20000>; msi-controller; @@ -4966,6 +5061,11 @@ <0 0x18592000 0 0x1000>; reg-names = "freq-domain0", "freq-domain1"; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dcvsh-irq-0", + "dcvsh-irq-1"; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; clock-names = "xo", "alternate"; diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi index 819a5f8825e7..a4b722e0fc1e 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi @@ -90,6 +90,8 @@ gpio-keys { compatible = "gpio-keys"; + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; key-camera-focus { label = "Camera Focus"; @@ -645,6 +647,13 @@ bias-disable; }; + gpio_keys_default: gpio-keys-default-state { + pins = "gpio64", "gpio113"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + imx300_vana_default: imx300-vana-default-state { pins = "gpio50"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts index 057579ae3013..e2708c74e95a 100644 --- a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts +++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts @@ -116,6 +116,33 @@ }; }; +&pmi632_typec { + status = "okay"; + + connector { + compatible = "usb-c-connector"; + + power-role = "dual"; + data-role = "dual"; + self-powered; + + typec-power-opmode = "default"; + pd-disable; + + port { + pmi632_hs_in: endpoint { + remote-endpoint = <&usb_dwc3_hs>; + }; + }; + }; +}; + +&pmi632_vbus { + regulator-min-microamp = <500000>; + regulator-max-microamp = <1000000>; + status = "okay"; +}; + &sdhc_1 { status = "okay"; vmmc-supply = <&pm8953_l8>; @@ -240,8 +267,8 @@ status = "okay"; }; -&usb3_dwc3 { - dr_mode = "peripheral"; +&usb_dwc3_hs { + remote-endpoint = <&pmi632_hs_in>; }; &wcnss { diff --git a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts index 32a7bd59e1ec..176b0119fe6d 100644 --- a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts +++ b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts @@ -441,6 +441,47 @@ }; }; +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l1a_1p225>; + status = "okay"; + + panel@0 { + compatible = "samsung,s6e3fa7-ams559nk06"; + reg = <0>; + + reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_default>; + + power-supply = <&vreg_l6b_3p3>; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l1b_0p925>; + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + &pm660l_gpios { vol_up_pin: vol-up-state { pins = "gpio7"; @@ -481,6 +522,29 @@ &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; + panel_default: panel-default-state { + te-pins { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + reset-pins { + pins = "gpio75"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + mode-pins { + pins = "gpio76"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; + touchscreen_default: ts-default-state { ts-reset-pins { pins = "gpio99"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index 1f517328199b..9a6d3d0c0ee4 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -195,6 +195,12 @@ gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>; enable-active-high; + /* + * FIXME: this regulator is responsible for VBUS on the left USB + * port. Keep it always on until we can correctly model this + * relationship. + */ + regulator-always-on; pinctrl-names = "default"; pinctrl-0 = <&pcie0_pwren_state>; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 2f20be99ee7e..10de2bd46ffc 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -2375,6 +2375,16 @@ phy-names = "pciephy"; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie0_phy: phy@1c06000 { @@ -2479,6 +2489,16 @@ phy-names = "pciephy"; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie1_phy: phy@1c0a000 { diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi index b74cf4baedd6..da1704061d58 100644 --- a/arch/arm64/boot/dts/qcom/sdx75.dtsi +++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi @@ -411,7 +411,7 @@ hwlocks = <&tcsr_mutex 3>; }; - soc: soc { + soc: soc@0 { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index 24bcec3366ef..ad704f4e147c 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -1205,6 +1205,37 @@ status = "disabled"; }; + cryptobam: dma-controller@1dc4000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0 0x01dc4000 0 0x24000>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <16>; + qcom,num-ees = <4>; + iommus = <&apps_smmu 0x426 0x11>, + <&apps_smmu 0x432 0x0>, + <&apps_smmu 0x436 0x11>, + <&apps_smmu 0x438 0x1>, + <&apps_smmu 0x43f 0x0>; + }; + + crypto: crypto@1dfa000 { + compatible = "qcom,sm6350-qce", "qcom,sm8150-qce", "qcom,qce"; + reg = <0 0x01dfa000 0 0x6000>; + dmas = <&cryptobam 4>, <&cryptobam 5>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x426 0x11>, + <&apps_smmu 0x432 0x0>, + <&apps_smmu 0x436 0x11>, + <&apps_smmu 0x438 0x1>, + <&apps_smmu 0x43f 0x0>; + interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "memory"; + }; + ipa: ipa@1e40000 { compatible = "qcom,sm6350-ipa"; @@ -2033,6 +2064,14 @@ remote-endpoint = <&mdss_dsi0_in>; }; }; + + port@2 { + reg = <2>; + + dpu_intf0_out: endpoint { + remote-endpoint = <&mdss_dp_in>; + }; + }; }; mdp_opp_table: opp-table { @@ -2070,6 +2109,86 @@ }; }; + mdss_dp: displayport-controller@ae90000 { + compatible = "qcom,sm6350-dp", "qcom,sm8350-dp"; + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0x600>, + <0 0xae91000 0 0x400>, + <0 0xae91400 0 0x400>; + interrupt-parent = <&mdss>; + interrupts = <12>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SM6350_CX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dp_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp_out: endpoint { + }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + mdss_dsi0: dsi@ae94000 { compatible = "qcom,sm6350-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae94000 0 0x400>; diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts index de670b407ef1..6cb6f503fdac 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts @@ -609,6 +609,11 @@ firmware-name = "qcom/sm8150/cdsp.mbn"; }; +&remoteproc_mpss { + firmware-name = "qcom/sm8150/modem.mbn"; + status = "okay"; +}; + &remoteproc_slpi { status = "okay"; @@ -713,3 +718,14 @@ &usb_2_dwc3 { dr_mode = "host"; }; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l1a_0p75>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l2c_1p3>; + vdd-3.3-ch0-supply = <&vreg_l11c_3p3>; + + qcom,ath10k-calibration-variant = "Qualcomm_sm8150hdk"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index a35c0852b5a1..ff22e4346660 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -1901,6 +1901,16 @@ pinctrl-0 = <&pcie0_default_state>; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie0_phy: phy@1c06000 { @@ -2011,6 +2021,16 @@ pinctrl-0 = <&pcie1_default_state>; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie1_phy: phy@1c0e000 { diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi index 6f54f50a70b0..41f117474872 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi @@ -636,7 +636,8 @@ connector { compatible = "usb-c-connector"; - power-role = "source"; + op-sink-microwatt = <10000000>; + power-role = "dual"; data-role = "dual"; self-powered; @@ -645,6 +646,12 @@ PDO_FIXED_USB_COMM | PDO_FIXED_DATA_SWAP)>; + sink-pdos = <PDO_FIXED(5000, 3000, + PDO_FIXED_DUAL_ROLE | + PDO_FIXED_USB_COMM | + PDO_FIXED_DATA_SWAP) + PDO_VAR(5000, 12000, 5000)>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -661,6 +668,8 @@ }; &pm8150b_vbus { + regulator-min-microamp = <500000>; + regulator-max-microamp = <3000000>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 39bd8f0eba1e..fe5485256b22 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -2203,6 +2203,16 @@ dma-coherent; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie0_phy: phy@1c06000 { @@ -2318,6 +2328,16 @@ dma-coherent; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie1_phy: phy@1c0e000 { @@ -2433,6 +2453,16 @@ dma-coherent; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie2_phy: phy@1c16000 { diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts index b43d264ed42b..4c25ab2f5670 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts @@ -42,6 +42,7 @@ compatible = "qcom,sm8350-pmic-glink", "qcom,pmic-glink"; #address-cells = <1>; #size-cells = <0>; + orientation-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; connector@0 { compatible = "usb-c-connector"; diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index a5e7dbbd8c6c..f7c4700f00c3 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -12,6 +12,7 @@ #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interconnect/qcom,icc.h> #include <dt-bindings/interconnect/qcom,sm8350.h> #include <dt-bindings/mailbox/qcom-ipcc.h> #include <dt-bindings/phy/phy-qcom-qmp.h> @@ -1572,6 +1573,16 @@ phy-names = "pciephy"; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie0_phy: phy@1c06000 { @@ -1669,6 +1680,16 @@ phy-names = "pciephy"; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie1_phy: phy@1c0e000 { @@ -1730,6 +1751,11 @@ <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "ufs-ddr", "cpu-ufs"; freq-table-hz = <75000000 300000000>, <0 0>, diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts index 0786cff07b89..3be46b56c723 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts @@ -95,6 +95,7 @@ compatible = "qcom,sm8450-pmic-glink", "qcom,pmic-glink"; #address-cells = <1>; #size-cells = <0>; + orientation-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>; connector@0 { compatible = "usb-c-connector"; diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts index c7d05945aa51..7b62ead68e77 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts @@ -467,6 +467,14 @@ vdda-pll-supply = <&vreg_l5b_0p88>; vdda18-supply = <&vreg_l1c_1p8>; vdda33-supply = <&vreg_l2b_3p07>; + qcom,squelch-detector-bp = <(-2090)>; + qcom,hs-disconnect-bp = <1743>; + qcom,pre-emphasis-amplitude-bp = <40000>; + qcom,pre-emphasis-duration-bp = <20000>; + qcom,hs-amplitude-bp = <2000>; + qcom,hs-output-impedance-micro-ohms = <2600000>; + qcom,hs-crossover-voltage-microvolt = <(-31000)>; + qcom,hs-rise-fall-time-bp = <(-4100)>; }; &usb_1_qmpphy { diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index b86be34a912b..7f32035aab7b 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -1850,6 +1850,16 @@ pinctrl-0 = <&pcie0_default_state>; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie0_phy: phy@1c06000 { @@ -1971,6 +1981,16 @@ pinctrl-0 = <&pcie1_default_state>; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie1_phy: phy@1c0e000 { @@ -2363,6 +2383,7 @@ compatible = "qcom,fastrpc"; qcom,glink-channels = "fastrpcglink-apps-dsp"; label = "sdsp"; + qcom,non-secure-domain; #address-cells = <1>; #size-cells = <0>; @@ -2665,6 +2686,7 @@ compatible = "qcom,fastrpc"; qcom,glink-channels = "fastrpcglink-apps-dsp"; label = "adsp"; + qcom,non-secure-domain; #address-cells = <1>; #size-cells = <0>; @@ -2731,6 +2753,7 @@ compatible = "qcom,fastrpc"; qcom,glink-channels = "fastrpcglink-apps-dsp"; label = "cdsp"; + qcom,non-secure-domain; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts new file mode 100644 index 000000000000..85e0d3d66e16 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts @@ -0,0 +1,779 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/firmware/qcom,scm.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/sound/cs35l45.h> +#include "sm8550.dtsi" +#include "pm8010.dtsi" +#include "pm8550.dtsi" +#include "pm8550b.dtsi" +#define PMK8550VE_SID 5 +#include "pm8550ve.dtsi" +#include "pm8550vs.dtsi" +#include "pmk8550.dtsi" +/* TODO: Only one SID of PMR735D seems accessible? */ + +/delete-node/ &hwfence_shbuf; +/delete-node/ &mpss_mem; +/delete-node/ &rmtfs_mem; +/ { + model = "Sony Xperia 1 V"; + compatible = "sony,pdx234", "qcom,sm8550"; + chassis-type = "handset"; + + aliases { + i2c0 = &i2c0; + i2c4 = &i2c4; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c16 = &i2c_hub_2; + serial0 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + label = "gpio-keys"; + + pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>; + pinctrl-names = "default"; + + key-camera-focus { + label = "Camera Focus"; + linux,code = <KEY_CAMERA_FOCUS>; + gpios = <&pm8550b_gpios 8 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + + key-camera-snapshot { + label = "Camera Snapshot"; + gpios = <&pm8550b_gpios 7 GPIO_ACTIVE_LOW>; + linux,code = <KEY_CAMERA>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + + key-volume-down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + pmic-glink { + compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; + orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_dp_qmpphy_out>; + }; + }; + }; + }; + }; + + reserved-memory { + mpss_mem: mpss-region@89800000 { + reg = <0x0 0x89800000 0x0 0x10800000>; + no-map; + }; + + splash@b8000000 { + reg = <0x0 0xb8000000 0x0 0x2b00000>; + no-map; + }; + + hwfence_shbuf: hwfence-shbuf-region@e6440000 { + reg = <0x0 0xe6440000 0x0 0x2dd000>; + no-map; + }; + + rmtfs_mem: memory@f8b00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0xf8b00000 0x0 0x280000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; + }; + + ramoops@ffd00000 { + compatible = "ramoops"; + reg = <0x0 0xffd00000 0x0 0xc0000>; + console-size = <0x40000>; + record-size = <0x1000>; + pmsg-size = <0x40000>; + ecc-size = <16>; + }; + + rdtag-store-region@ffdc0000 { + reg = <0x0 0xffdc0000 0x0 0x40000>; + no-map; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + pm8550_bob1: bob1 { + regulator-name = "pm8550_bob1"; + regulator-min-microvolt = <3416000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* TODO: bob2 @ 2.704-3.008V doesn't fall into the vreg driver constraints */ + + pm8550_l1: ldo1 { + regulator-name = "pm8550_l1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550_l2: ldo2 { + regulator-name = "pm8550_l2"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L4 exists in cmd-db, but the board seems to crash on access */ + + pm8550_l5: ldo5 { + regulator-name = "pm8550_l5"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550_l6: ldo6 { + regulator-name = "pm8550_l6"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550_l7: ldo7 { + regulator-name = "pm8550_l7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550_l8: ldo8 { + regulator-name = "pm8550_l8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550_l9: ldo9 { + regulator-name = "pm8550_l9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550_l10: ldo10 { + regulator-name = "pm8550_l10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550_l11: ldo11 { + regulator-name = "pm8550_l11"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550_l12: ldo12 { + regulator-name = "pm8550_l12"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550_l13: ldo13 { + regulator-name = "pm8550_l13"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550_l14: ldo14 { + regulator-name = "pm8550_l14"; + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550_l15: ldo15 { + regulator-name = "pm8550_l15"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550_l16: ldo16 { + regulator-name = "pm8550_l16"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550_l17: ldo17 { + regulator-name = "pm8550_l17"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "c"; + + pm8550vs_0_l1: ldo1 { + regulator-name = "pm8550vs_0_l1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550vs_0_l3: ldo3 { + regulator-name = "pm8550vs_0_l3"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "d"; + + pm8550vs_1_l1: ldo1 { + regulator-name = "pm8550vs_1_l1"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L3 exists in cmd-db, but the board seems to crash on access */ + }; + + regulators-3 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "e"; + + pm8550vs_2_s4: smps4 { + regulator-name = "pm8550vs_2_s4"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <984000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550vs_2_s5: smps5 { + regulator-name = "pm8550vs_2_s5"; + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1120000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550vs_2_l1: ldo1 { + regulator-name = "pm8550vs_2_l1"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550vs_2_l2: ldo2 { + regulator-name = "pm8550vs_2_l2"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <968000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550vs_2_l3: ldo3 { + regulator-name = "pm8550vs_2_l3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "f"; + + pm8550ve_s4: smps4 { + regulator-name = "pm8550ve_s4"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <700000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550ve_l1: ldo1 { + regulator-name = "pm8550ve_l1"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550ve_l2: ldo2 { + regulator-name = "pm8550ve_l2"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550ve_l3: ldo3 { + regulator-name = "pm8550ve_l3"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-5 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "g"; + + pm8550vs_3_s1: smps1 { + regulator-name = "pm8550vs_3_s1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550vs_3_s2: smps2 { + regulator-name = "pm8550vs_3_s2"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1036000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550vs_3_s3: smps3 { + regulator-name = "pm8550vs_3_s3"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550vs_3_s4: smps4 { + regulator-name = "pm8550vs_3_s4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550vs_3_s5: smps5 { + regulator-name = "pm8550vs_3_s5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550vs_3_s6: smps6 { + regulator-name = "pm8550vs_3_s6"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550vs_3_l1: ldo1 { + regulator-name = "pm8550vs_3_l1"; + regulator-min-microvolt = <1144000>; + regulator-max-microvolt = <1256000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550vs_3_l2: ldo2 { + regulator-name = "pm8550vs_3_l2"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550vs_3_l3: ldo3 { + regulator-name = "pm8550vs_3_l3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + /* TODO: Unknown PMIC @ k, l, PM8010 @ m, n */ +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpi_dma2 { + status = "okay"; +}; + +&i2c_hub_2 { + clock-frequency = <400000>; + status = "okay"; + + pmic@75 { + compatible = "dlg,slg51000"; + reg = <0x75>; + dlg,cs-gpios = <&pm8550vs_g_gpios 4 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&cam_pwr_a_cs>; + pinctrl-names = "default"; + + regulators { + slg51000_a_ldo1: ldo1 { + regulator-name = "slg51000_a_ldo1"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + }; + + slg51000_a_ldo2: ldo2 { + regulator-name = "slg51000_a_ldo2"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + }; + + slg51000_a_ldo3: ldo3 { + regulator-name = "slg51000_a_ldo3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + + slg51000_a_ldo4: ldo4 { + regulator-name = "slg51000_a_ldo4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + + slg51000_a_ldo5: ldo5 { + regulator-name = "slg51000_a_ldo5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1200000>; + }; + + slg51000_a_ldo6: ldo6 { + regulator-name = "slg51000_a_ldo6"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1200000>; + }; + + slg51000_a_ldo7: ldo7 { + regulator-name = "slg51000_a_ldo7"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + }; + }; +}; + +&i2c_master_hub_0 { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <1000000>; + status = "okay"; + + /* NXP NFC @ 28 */ +}; + +&i2c4 { + clock-frequency = <400000>; + status = "okay"; + + /* LX Semi SW82907 touchscreen @ 28 */ +}; + +&i2c10 { + clock-frequency = <1000000>; + status = "okay"; + + /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */ +}; + +&i2c11 { + clock-frequency = <1000000>; + status = "okay"; + + cs35l41_l: speaker-amp@30 { + compatible = "cirrus,cs35l45"; + reg = <0x30>; + interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>; + cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED | CS35L45_ASP_TX_HIZ_DISABLED)>; + #sound-dai-cells = <1>; + + cirrus,gpio-ctrl2 { + gpio-ctrl = <0x2>; + }; + }; + + cs35l41_r: speaker-amp@31 { + compatible = "cirrus,cs35l45"; + reg = <0x31>; + interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>; + cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED | CS35L45_ASP_TX_HIZ_DISABLED)>; + #sound-dai-cells = <1>; + + cirrus,gpio-ctrl2 { + gpio-ctrl = <0x2>; + }; + }; +}; + +&pcie0 { + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&pm8550vs_2_l1>; + vdda-pll-supply = <&pm8550vs_2_l3>; + + status = "okay"; +}; + +&pm8550_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <1>, <4>; + led-max-microamp = <500000>; + flash-max-microamp = <1000000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <0>; + }; + + led-1 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_YELLOW>; + led-sources = <2>, <3>; + led-max-microamp = <500000>; + flash-max-microamp = <1000000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <1>; + }; +}; + +&pm8550_gpios { + vol_down_n: volume-down-n-state { + pins = "gpio6"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; + + sdc2_card_det_n: sd-card-det-n-state { + pins = "gpio12"; + function = "normal"; + power-source = <1>; + bias-pull-down; + output-disable; + input-enable; + }; +}; + +&pm8550b_gpios { + snapshot_n: snapshot-n-state { + pins = "gpio7"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; + + focus_n: focus-n-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + +&pm8550vs_g_gpios { + cam_pwr_a_cs: cam-pwr-a-cs-state { + pins = "gpio4"; + function = "normal"; + power-source = <0x01>; + drive-push-pull; + output-low; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; + }; +}; + +&pm8550b_eusb2_repeater { + qcom,tune-usb2-disc-thres = /bits/ 8 <0x6>; + qcom,tune-usb2-amplitude = /bits/ 8 <0xf>; + qcom,tune-usb2-preem = /bits/ 8 <0x7>; + vdd18-supply = <&pm8550_l15>; + vdd3-supply = <&pm8550_l5>; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEUP>; + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sm8550/Sony/yodo/adsp.mbn", + "qcom/sm8550/Sony/yodo/adsp_dtb.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm8550/Sony/yodo/cdsp.mbn", + "qcom/sm8550/Sony/yodo/cdsp_dtb.mbn"; + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&sdc2_default &sdc2_card_det_n>; + pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>; + pinctrl-names = "default", "sleep"; + vmmc-supply = <&pm8550_l9>; + vqmmc-supply = <&pm8550_l8>; + no-sdio; + no-mmc; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + gpio-reserved-ranges = <32 8>; +}; + +&uart7 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; +}; + +&usb_1_hsphy { + vdd-supply = <&pm8550vs_2_l1>; + vdda12-supply = <&pm8550vs_2_l3>; + phys = <&pm8550b_eusb2_repeater>; + + status = "okay"; +}; + +&usb_dp_qmpphy { + vdda-phy-supply = <&pm8550vs_2_l3>; + vdda-pll-supply = <&pm8550ve_l3>; + orientation-switch; + + status = "okay"; +}; + +&usb_dp_qmpphy_out { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&usb_dp_qmpphy_usb_ss_in { + remote-endpoint = <&usb_1_dwc3_ss>; +}; + +&xo_board { + clock-frequency = <76800000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index 3904348075f6..171fdb213cd9 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -812,6 +812,7 @@ dma-channels = <12>; dma-channel-mask = <0x3e>; iommus = <&apps_smmu 0x436 0>; + dma-coherent; status = "disabled"; }; @@ -823,6 +824,7 @@ clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; iommus = <&apps_smmu 0x423 0>; + dma-coherent; #address-cells = <2>; #size-cells = <2>; status = "disabled"; @@ -1322,6 +1324,7 @@ dma-channels = <12>; dma-channel-mask = <0x1e>; iommus = <&apps_smmu 0xb6 0>; + dma-coherent; status = "disabled"; }; @@ -1335,6 +1338,7 @@ iommus = <&apps_smmu 0xa3 0>; interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>; interconnect-names = "qup-core"; + dma-coherent; #address-cells = <2>; #size-cells = <2>; status = "disabled"; @@ -1770,6 +1774,16 @@ phy-names = "pciephy"; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie0_phy: phy@1c06000 { @@ -1883,6 +1897,16 @@ phy-names = "pciephy"; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie1_phy: phy@1c0e000 { @@ -3227,12 +3251,21 @@ reg = <0x0 0x0a600000 0x0 0xcd00>; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; iommus = <&apps_smmu 0x40 0x0>; - snps,dis_u2_susphy_quirk; - snps,dis_enblslpm_quirk; - snps,usb3_lpm_capable; phys = <&usb_1_hsphy>, <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,usb2-gadget-lpm-disable; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,is-utmi-l1-suspend; + snps,usb3_lpm_capable; + snps,usb2-lpm-disable; + snps,has-lpm-erratum; + tx-fifo-resize; + dma-coherent; ports { #address-cells = <1>; @@ -3968,6 +4001,7 @@ <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>; + dma-coherent; }; intc: interrupt-controller@17100000 { @@ -4316,6 +4350,7 @@ compatible = "qcom,fastrpc"; qcom,glink-channels = "fastrpcglink-apps-dsp"; label = "adsp"; + qcom,non-secure-domain; #address-cells = <1>; #size-cells = <0>; @@ -4454,6 +4489,7 @@ compatible = "qcom,fastrpc"; qcom,glink-channels = "fastrpcglink-apps-dsp"; label = "cdsp"; + qcom,non-secure-domain; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts index 4450273f9667..d04ceaa73c2b 100644 --- a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts @@ -641,10 +641,6 @@ status = "okay"; }; -&mdss_mdp { - status = "okay"; -}; - &pcie_1_phy_aux_clk { clock-frequency = <1000>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts index b07cac2e5bc8..4e94f7fe4d2d 100644 --- a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts @@ -766,6 +766,14 @@ status = "okay"; }; +&gpu { + status = "okay"; + + zap-shader { + firmware-name = "qcom/sm8650/gen70900_zap.mbn"; + }; +}; + &lpass_tlmm { spkr_1_sd_n_active: spkr-1-sd-n-active-state { pins = "gpio21"; @@ -827,10 +835,6 @@ remote-endpoint = <&usb_dp_qmpphy_dp_in>; }; -&mdss_mdp { - status = "okay"; -}; - &pcie_1_phy_aux_clk { clock-frequency = <1000>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi index ba72d8f38420..434ad2f12332 100644 --- a/arch/arm64/boot/dts/qcom/sm8650.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi @@ -485,9 +485,9 @@ no-map; }; - /* Merged aop_config, tme_crash_dump, tme_log and uefi_log regions */ + /* Merged aop_config, tme_crash_dump, tme_log, uefi_log, and chipinfo regions */ aop_tme_uefi_merged_mem: aop-tme-uefi-merged@81c80000 { - reg = <0 0x81c80000 0 0x74000>; + reg = <0 0x81c80000 0 0x75000>; no-map; }; @@ -2294,6 +2294,16 @@ dma-coherent; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie0_phy: phy@1c06000 { @@ -2422,6 +2432,16 @@ <0x02000000 0 0x40300000 0 0x40300000 0 0x1fd00000>; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie1_phy: phy@1c0e000 { @@ -2591,6 +2611,143 @@ #reset-cells = <1>; }; + gpu: gpu@3d00000 { + compatible = "qcom,adreno-43051401", "qcom,adreno"; + reg = <0x0 0x03d00000 0x0 0x40000>, + <0x0 0x03d9e000 0x0 0x1000>, + <0x0 0x03d61000 0x0 0x800>; + reg-names = "kgsl_3d0_reg_memory", + "cx_mem", + "cx_dbgc"; + + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&adreno_smmu 0 0x0>, + <&adreno_smmu 1 0x0>; + + operating-points-v2 = <&gpu_opp_table>; + + qcom,gmu = <&gmu>; + + status = "disabled"; + + zap-shader { + memory-region = <&gpu_micro_code_mem>; + }; + + /* Speedbin needs more work on A740+, keep only lower freqs */ + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-231000000 { + opp-hz = /bits/ 64 <231000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>; + }; + + opp-310000000 { + opp-hz = /bits/ 64 <310000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>; + }; + + opp-366000000 { + opp-hz = /bits/ 64 <366000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>; + }; + + opp-422000000 { + opp-hz = /bits/ 64 <422000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>; + }; + + opp-578000000 { + opp-hz = /bits/ 64 <578000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + opp-629000000 { + opp-hz = /bits/ 64 <629000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>; + }; + + opp-680000000 { + opp-hz = /bits/ 64 <680000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + opp-720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; + }; + + opp-770000000 { + opp-hz = /bits/ 64 <770000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + opp-834000000 { + opp-hz = /bits/ 64 <834000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + }; + }; + + gmu: gmu@3d6a000 { + compatible = "qcom,adreno-gmu-750.1", "qcom,adreno-gmu"; + reg = <0x0 0x03d6a000 0x0 0x35000>, + <0x0 0x03d50000 0x0 0x10000>, + <0x0 0x0b280000 0x0 0x10000>; + reg-names = "gmu", "rscc", "gmu_pdc"; + + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + + clocks = <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_DEMET_CLK>; + clock-names = "ahb", + "gmu", + "cxo", + "axi", + "memnoc", + "hub", + "demet"; + + power-domains = <&gpucc GPU_CX_GDSC>, + <&gpucc GPU_GX_GDSC>; + power-domain-names = "cx", + "gx"; + + iommus = <&adreno_smmu 5 0x0>; + + qcom,qmp = <&aoss_qmp>; + + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-260000000 { + opp-hz = /bits/ 64 <260000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + opp-625000000 { + opp-hz = /bits/ 64 <625000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + }; + }; + gpucc: clock-controller@3d90000 { compatible = "qcom,sm8650-gpucc"; reg = <0 0x03d90000 0 0xa000>; @@ -2604,6 +2761,50 @@ #power-domain-cells = <1>; }; + adreno_smmu: iommu@3da0000 { + compatible = "qcom,sm8650-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x03da0000 0x0 0x40000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 677 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>; + clock-names = "hlos", + "bus", + "iface", + "ahb"; + power-domains = <&gpucc GPU_CX_GDSC>; + dma-coherent; + }; + ipa: ipa@3f40000 { compatible = "qcom,sm8650-ipa", "qcom,sm8550-ipa"; @@ -3584,14 +3785,16 @@ compatible = "qcom,sm8650-dwc3", "qcom,dwc3"; reg = <0 0x0a6f8800 0 0x400>; - interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_RISING>, <&pdc 15 IRQ_TYPE_EDGE_RISING>, - <&pdc 14 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "hs_phy_irq", - "ss_phy_irq", + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", "dm_hs_phy_irq", - "dp_hs_phy_irq"; + "ss_phy_irq"; clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>, @@ -4845,6 +5048,8 @@ label = "adsp"; + qcom,non-secure-domain; + #address-cells = <1>; #size-cells = <0>; @@ -5002,6 +5207,8 @@ label = "cdsp"; + qcom,non-secure-domain; + #address-cells = <1>; #size-cells = <0>; @@ -5084,6 +5291,38 @@ <&apps_smmu 0x19c8 0x0>; dma-coherent; }; + + /* note: secure cb9 in downstream */ + + compute-cb@10 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <12>; + + iommus = <&apps_smmu 0x196c 0x0>, + <&apps_smmu 0x0c0c 0x20>, + <&apps_smmu 0x19cc 0x0>; + dma-coherent; + }; + + compute-cb@11 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <13>; + + iommus = <&apps_smmu 0x196d 0x0>, + <&apps_smmu 0x0c0d 0x20>, + <&apps_smmu 0x19cd 0x0>; + dma-coherent; + }; + + compute-cb@12 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <14>; + + iommus = <&apps_smmu 0x196e 0x0>, + <&apps_smmu 0x0c0e 0x20>, + <&apps_smmu 0x19ce 0x0>; + dma-coherent; + }; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts index 6a0a54532e5f..c5c2895b37c7 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts @@ -9,6 +9,7 @@ #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "x1e80100.dtsi" +#include "x1e80100-pmics.dtsi" / { model = "Qualcomm Technologies, Inc. X1E80100 CRD"; @@ -598,8 +599,6 @@ compatible = "qcom,x1e80100-dp"; /delete-property/ #sound-dai-cells; - data-lanes = <0 1 2 3>; - status = "okay"; aux-bus { @@ -619,6 +618,9 @@ port@1 { reg = <1>; mdss_dp3_out: endpoint { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + remote-endpoint = <&edp_panel_in>; }; }; @@ -680,16 +682,32 @@ status = "okay"; }; +&smb2360_0_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l2b_3p0>; +}; + +&smb2360_1_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l14b_3p0>; +}; + +&smb2360_2_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l8b_3p0>; +}; + &swr0 { status = "okay"; + pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>; + pinctrl-names = "default"; + /* WSA8845, Left Woofer */ left_woofer: speaker@0,0 { compatible = "sdw20217020400"; reg = <0 0>; - pinctrl-0 = <&spkr_01_sd_n_active>; - pinctrl-names = "default"; - powerdown-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; #sound-dai-cells = <0>; sound-name-prefix = "WooferLeft"; vdd-1p8-supply = <&vreg_l15b_1p8>; @@ -700,8 +718,7 @@ left_tweeter: speaker@0,1 { compatible = "sdw20217020400"; reg = <0 1>; - /* pinctrl in left_woofer node because of sharing the GPIO*/ - powerdown-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; #sound-dai-cells = <0>; sound-name-prefix = "TwitterLeft"; vdd-1p8-supply = <&vreg_l15b_1p8>; @@ -734,13 +751,14 @@ &swr3 { status = "okay"; + pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>; + pinctrl-names = "default"; + /* WSA8845, Right Woofer */ right_woofer: speaker@0,0 { compatible = "sdw20217020400"; reg = <0 0>; - pinctrl-0 = <&spkr_23_sd_n_active>; - pinctrl-names = "default"; - powerdown-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; + reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; #sound-dai-cells = <0>; sound-name-prefix = "WooferRight"; vdd-1p8-supply = <&vreg_l15b_1p8>; @@ -751,8 +769,7 @@ right_tweeter: speaker@0,1 { compatible = "sdw20217020400"; reg = <0 1>; - /* pinctrl in right_woofer node because of sharing the GPIO*/ - powerdown-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; + reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; #sound-dai-cells = <0>; sound-name-prefix = "TwitterRight"; vdd-1p8-supply = <&vreg_l15b_1p8>; @@ -817,6 +834,8 @@ vdd-supply = <&vreg_l2e_0p8>; vdda12-supply = <&vreg_l3e_1p2>; + phys = <&smb2360_0_eusb2_repeater>; + status = "okay"; }; @@ -837,6 +856,8 @@ vdd-supply = <&vreg_l2e_0p8>; vdda12-supply = <&vreg_l3e_1p2>; + phys = <&smb2360_1_eusb2_repeater>; + status = "okay"; }; @@ -857,6 +878,8 @@ vdd-supply = <&vreg_l2e_0p8>; vdda12-supply = <&vreg_l3e_1p2>; + phys = <&smb2360_2_eusb2_repeater>; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi b/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi new file mode 100644 index 000000000000..04301f772fbd --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { +}; + +&spmi_bus1 { + smb2360_0: pmic@7 { + compatible = "qcom,smb2360", "qcom,spmi-pmic"; + reg = <0x7 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + smb2360_0_eusb2_repeater: phy@fd00 { + compatible = "qcom,smb2360-eusb2-repeater"; + reg = <0xfd00>; + #phy-cells = <0>; + }; + }; + + smb2360_1: pmic@a { + compatible = "qcom,smb2360", "qcom,spmi-pmic"; + reg = <0xa SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + smb2360_1_eusb2_repeater: phy@fd00 { + compatible = "qcom,smb2360-eusb2-repeater"; + reg = <0xfd00>; + #phy-cells = <0>; + }; + }; + + smb2360_2: pmic@b { + compatible = "qcom,smb2360", "qcom,spmi-pmic"; + reg = <0xb SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + smb2360_2_eusb2_repeater: phy@fd00 { + compatible = "qcom,smb2360-eusb2-repeater"; + reg = <0xfd00>; + #phy-cells = <0>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts index e76d29053d79..2061fbe7b75a 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts @@ -9,6 +9,7 @@ #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "x1e80100.dtsi" +#include "x1e80100-pmics.dtsi" / { model = "Qualcomm Technologies, Inc. X1E80100 QCP"; @@ -409,8 +410,6 @@ compatible = "qcom,x1e80100-dp"; /delete-property/ #sound-dai-cells; - data-lanes = <0 1 2 3>; - status = "okay"; aux-bus { @@ -430,6 +429,9 @@ port@1 { reg = <1>; mdss_dp3_out: endpoint { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + remote-endpoint = <&edp_panel_in>; }; }; @@ -491,6 +493,21 @@ status = "okay"; }; +&smb2360_0_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l2b_3p0>; +}; + +&smb2360_1_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l14b_3p0>; +}; + +&smb2360_2_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l8b_3p0>; +}; + &tlmm { gpio-reserved-ranges = <33 3>, /* Unused */ <44 4>, /* SPI (TPM) */ @@ -513,6 +530,8 @@ vdd-supply = <&vreg_l2e_0p8>; vdda12-supply = <&vreg_l3e_1p2>; + phys = <&smb2360_0_eusb2_repeater>; + status = "okay"; }; @@ -533,6 +552,8 @@ vdd-supply = <&vreg_l2e_0p8>; vdda12-supply = <&vreg_l3e_1p2>; + phys = <&smb2360_1_eusb2_repeater>; + status = "okay"; }; @@ -553,6 +574,8 @@ vdd-supply = <&vreg_l2e_0p8>; vdda12-supply = <&vreg_l3e_1p2>; + phys = <&smb2360_2_eusb2_repeater>; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi index 8e517f76189e..a8dfd8146706 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi @@ -3088,7 +3088,7 @@ qcom,ports-hstart = /bits/ 8 <0xff 0x03 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; qcom,ports-hstop = /bits/ 8 <0xff 0x06 0x0f 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; - qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0x01 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; @@ -4095,8 +4095,6 @@ mdss_dp3_in: endpoint { remote-endpoint = <&mdss_intf5_out>; - - link-frequencies = /bits/ 64 <8100000000>; }; }; @@ -4221,6 +4219,48 @@ #clock-cells = <0>; }; + spmi: arbiter@c400000 { + compatible = "qcom,x1e80100-spmi-pmic-arb"; + reg = <0 0x0c400000 0 0x3000>, + <0 0x0c500000 0 0x400000>, + <0 0x0c440000 0 0x80000>; + reg-names = "core", "chnls", "obsrvr"; + + qcom,ee = <0>; + qcom,channel = <0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + spmi_bus0: spmi@c42d000 { + reg = <0 0x0c42d000 0 0x4000>, + <0 0x0c4c0000 0 0x10000>; + reg-names = "cnfg", "intr"; + + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <4>; + + #address-cells = <2>; + #size-cells = <0>; + }; + + spmi_bus1: spmi@c432000 { + reg = <0 0x0c432000 0 0x4000>, + <0 0x0c4d0000 0 0x10000>; + reg-names = "cnfg", "intr"; + + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 3 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <4>; + + #address-cells = <2>; + #size-cells = <0>; + }; + }; tlmm: pinctrl@f100000 { compatible = "qcom,x1e80100-tlmm"; |