Merge tag 'arm-fixes-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC fixes from Arnd Bergmann:
 "Where the last set of fixes was mostly drivers, this time the
  devicetree changes all come at once, targeting mostly the Rockchips,
  Qualcomm and NXP platforms.

  The Qualcomm bugfixes target the Snapdragon X Elite laptops,
  specifically problems with PCIe and NVMe support to improve
  reliability, and a boot regresion on msm8939.

  Also for Snapdragon platforms, there are a number of correctness
  changes in the several platform specific device drivers, but none of
  these are as impactful.

  On the NXP i.MX platform, the fixes are all for 64-bit i.MX8 variants,
  correcting individual entries in the devicetree that were incorrect
  and causing the media, video, mmc and spi drivers to misbehave in
  minor ways.

  The Arm SCMI firmware driver gets fixes for a use-after-free bug and
  for correctly parsing firmware information.

  On the RISC-V side, there are three minor devicetree fixes for
  starfive and sophgo, again addressing only minor mistakes. One device
  driver patch fixes a problem with spurious interrupt handling"

* tag 'arm-fixes-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (63 commits)
  firmware: arm_scmi: Use vendor string in max-rx-timeout-ms
  dt-bindings: firmware: arm,scmi: Add missing vendor string
  riscv: dts: Replace deprecated snps,nr-gpios property for snps,dw-apb-gpio-port devices
  arm64: dts: rockchip: Correct GPIO polarity on brcm BT nodes
  arm64: dts: rockchip: Drop invalid clock-names from es8388 codec nodes
  ARM: dts: rockchip: Fix the realtek audio codec on rk3036-kylin
  ARM: dts: rockchip: Fix the spi controller on rk3036
  ARM: dts: rockchip: drop grf reference from rk3036 hdmi
  ARM: dts: rockchip: fix rk3036 acodec node
  arm64: dts: rockchip: remove orphaned pinctrl-names from pinephone pro
  soc: qcom: pmic_glink: Handle GLINK intent allocation rejections
  rpmsg: glink: Handle rejected intent request better
  arm64: dts: qcom: x1e80100: fix PCIe5 interconnect
  arm64: dts: qcom: x1e80100: fix PCIe4 interconnect
  arm64: dts: qcom: x1e80100: Fix up BAR spaces
  MAINTAINERS: invert Misc RISC-V SoC Support's pattern
  soc: qcom: socinfo: fix revision check in qcom_socinfo_probe()
  arm64: dts: qcom: x1e80100-qcp: fix nvme regulator boot glitch
  arm64: dts: qcom: x1e80100-microsoft-romulus: fix nvme regulator boot glitch
  arm64: dts: qcom: x1e80100-yoga-slim7x: fix nvme regulator boot glitch
  ...

59 files changed, 213 insertions, 158 deletions

diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
index 54d7d11bfed4..ff7a6f12cd00 100644
--- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
+++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
@@ -124,7 +124,7 @@ properties:
       atomic mode of operation, even if requested.
     default: 0
 
-  max-rx-timeout-ms:
+  arm,max-rx-timeout-ms:
     description:
       An optional time value, expressed in milliseconds, representing the
       transport maximum timeout value for the receive channel. The value should
diff --git a/MAINTAINERS b/MAINTAINERS
index bdae0faf000c..91d0609db61b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2852,7 +2852,7 @@ F:	Documentation/devicetree/bindings/arm/qcom.yaml
 F:	Documentation/devicetree/bindings/bus/qcom*
 F:	Documentation/devicetree/bindings/cache/qcom,llcc.yaml
 F:	Documentation/devicetree/bindings/firmware/qcom,scm.yaml
-F:	Documentation/devicetree/bindings/reserved-memory/qcom
+F:	Documentation/devicetree/bindings/reserved-memory/qcom*
 F:	Documentation/devicetree/bindings/soc/qcom/
 F:	arch/arm/boot/dts/qcom/
 F:	arch/arm/configs/qcom_defconfig
@@ -19846,12 +19846,10 @@ L:	linux-riscv@lists.infradead.org
 S:	Maintained
 Q:	https://patchwork.kernel.org/project/linux-riscv/list/
 T:	git https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/
-F:	Documentation/devicetree/bindings/riscv/
-F:	arch/riscv/boot/dts/
-X:	arch/riscv/boot/dts/allwinner/
-X:	arch/riscv/boot/dts/renesas/
-X:	arch/riscv/boot/dts/sophgo/
-X:	arch/riscv/boot/dts/thead/
+F:	arch/riscv/boot/dts/canaan/
+F:	arch/riscv/boot/dts/microchip/
+F:	arch/riscv/boot/dts/sifive/
+F:	arch/riscv/boot/dts/starfive/
 
 RISC-V PMU DRIVERS
 M:	Atish Patra <atishp@atishpatra.org>
diff --git a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
index e32c73d32f0a..2f84e2805712 100644
--- a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
@@ -325,8 +325,8 @@
 &i2c2 {
 	status = "okay";
 
-	rt5616: rt5616@1b {
-		compatible = "rt5616";
+	rt5616: audio-codec@1b {
+		compatible = "realtek,rt5616";
 		reg = <0x1b>;
 		clocks = <&cru SCLK_I2S_OUT>;
 		clock-names = "mclk";
diff --git a/arch/arm/boot/dts/rockchip/rk3036.dtsi b/arch/arm/boot/dts/rockchip/rk3036.dtsi
index 96279d1e02fe..63b9912be06a 100644
--- a/arch/arm/boot/dts/rockchip/rk3036.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3036.dtsi
@@ -384,12 +384,13 @@
 		};
 	};
 
-	acodec: acodec-ana@20030000 {
-		compatible = "rk3036-codec";
+	acodec: audio-codec@20030000 {
+		compatible = "rockchip,rk3036-codec";
 		reg = <0x20030000 0x4000>;
-		rockchip,grf = <&grf>;
 		clock-names = "acodec_pclk";
 		clocks = <&cru PCLK_ACODEC>;
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 	};
 
@@ -399,7 +400,6 @@
 		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru  PCLK_HDMI>;
 		clock-names = "pclk";
-		rockchip,grf = <&grf>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&hdmi_ctl>;
 		#sound-dai-cells = <0>;
@@ -553,11 +553,11 @@
 	};
 
 	spi: spi@20074000 {
-		compatible = "rockchip,rockchip-spi";
+		compatible = "rockchip,rk3036-spi";
 		reg = <0x20074000 0x1000>;
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru PCLK_SPI>, <&cru SCLK_SPI>;
-		clock-names = "apb-pclk","spi_pclk";
+		clocks = <&cru SCLK_SPI>, <&cru PCLK_SPI>;
+		clock-names = "spiclk", "apb_pclk";
 		dmas = <&pdma 8>, <&pdma 9>;
 		dma-names = "tx", "rx";
 		pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lvds0.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lvds0.dtsi
index d00036204a8c..dad0dc8fb431 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-lvds0.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-lvds0.dtsi
@@ -14,7 +14,7 @@ lvds0_subsys: bus@56240000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x56243000 0x4>;
 		#clock-cells = <1>;
-		clock-output-names = "mipi1_lis_lpcg_ipg_clk";
+		clock-output-names = "lvds0_lis_lpcg_ipg_clk";
 		power-domains = <&pd IMX_SC_R_MIPI_1>;
 	};
 
@@ -22,9 +22,9 @@ lvds0_subsys: bus@56240000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x5624300c 0x4>;
 		#clock-cells = <1>;
-		clock-output-names = "mipi1_pwm_lpcg_clk",
-				     "mipi1_pwm_lpcg_ipg_clk",
-				     "mipi1_pwm_lpcg_32k_clk";
+		clock-output-names = "lvds0_pwm_lpcg_clk",
+				     "lvds0_pwm_lpcg_ipg_clk",
+				     "lvds0_pwm_lpcg_32k_clk";
 		power-domains = <&pd IMX_SC_R_MIPI_1_PWM_0>;
 	};
 
@@ -32,8 +32,8 @@ lvds0_subsys: bus@56240000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x56243010 0x4>;
 		#clock-cells = <1>;
-		clock-output-names = "mipi1_i2c0_lpcg_clk",
-				     "mipi1_i2c0_lpcg_ipg_clk";
+		clock-output-names = "lvds0_i2c0_lpcg_clk",
+				     "lvds0_i2c0_lpcg_ipg_clk";
 		power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-vpu.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-vpu.dtsi
index c6540768bdb9..87211c18d65a 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-vpu.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-vpu.dtsi
@@ -15,7 +15,7 @@ vpu: vpu@2c000000 {
 	mu_m0: mailbox@2d000000 {
 		compatible = "fsl,imx6sx-mu";
 		reg = <0x2d000000 0x20000>;
-		interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
 		#mbox-cells = <2>;
 		power-domains = <&pd IMX_SC_R_VPU_MU_0>;
 		status = "disabled";
@@ -24,7 +24,7 @@ vpu: vpu@2c000000 {
 	mu1_m0: mailbox@2d020000 {
 		compatible = "fsl,imx6sx-mu";
 		reg = <0x2d020000 0x20000>;
-		interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
 		#mbox-cells = <2>;
 		power-domains = <&pd IMX_SC_R_VPU_MU_1>;
 		status = "disabled";
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
index 50debe821c42..9c102acb8052 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
@@ -218,6 +218,18 @@
 	};
 };
 
+&media_blk_ctrl {
+	/*
+	 * The LVDS panel on this device uses 72.4 MHz pixel clock,
+	 * set IMX8MP_VIDEO_PLL1 to 72.4 * 7 = 506.8 MHz so the LDB
+	 * serializer and LCDIFv3 scanout engine can reach accurate
+	 * pixel clock of exactly 72.4 MHz.
+	 */
+	assigned-clock-rates = <500000000>, <200000000>,
+			       <0>, <0>, <500000000>,
+			       <506800000>;
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts
index 3c2efdc59bfa..30962922b361 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts
@@ -71,6 +71,7 @@
 	assigned-clock-rates = <500000000>, <200000000>, <0>,
 		/* IMX8MP_CLK_MEDIA_DISP2_PIX = pixelclk of lvds panel */
 		<68900000>,
+		<500000000>,
 		/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_LDB * 2 */
 		<964600000>;
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index f3531cfb0d79..40e847bc0b7f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -1261,7 +1261,7 @@
 				compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b40000 0x10000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MP_CLK_DUMMY>,
+				clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
 					 <&clk IMX8MP_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MP_CLK_USDHC1_ROOT>;
 				clock-names = "ipg", "ahb", "per";
@@ -1275,7 +1275,7 @@
 				compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b50000 0x10000>;
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MP_CLK_DUMMY>,
+				clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
 					 <&clk IMX8MP_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MP_CLK_USDHC2_ROOT>;
 				clock-names = "ipg", "ahb", "per";
@@ -1289,7 +1289,7 @@
 				compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b60000 0x10000>;
 				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MP_CLK_DUMMY>,
+				clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
 					 <&clk IMX8MP_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MP_CLK_USDHC3_ROOT>;
 				clock-names = "ipg", "ahb", "per";
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-vpu.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-vpu.dtsi
index 7894a3ab26d6..f81937b5fb72 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-ss-vpu.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-vpu.dtsi
@@ -5,6 +5,14 @@
  * Author: Alexander Stein
  */
 
+&mu_m0 {
+	interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mu1_m0 {
+	interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &vpu_core0 {
 	reg = <0x2d040000 0x10000>;
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
index e32d5afcf4a9..43f543768444 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
@@ -384,7 +384,7 @@
 			};
 
 			flexspi2: spi@29810000 {
-				compatible = "nxp,imx8mm-fspi";
+				compatible = "nxp,imx8ulp-fspi";
 				reg = <0x29810000 0x10000>, <0x60000000 0x10000000>;
 				reg-names = "fspi_base", "fspi_mmap";
 				#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi
index 28634789a8a9..7af210789879 100644
--- a/arch/arm64/boot/dts/qcom/msm8939.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi
@@ -248,7 +248,7 @@
 
 		smd-edge {
 			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			mboxes = <&apcs1_mbox 0>;
+			qcom,ipc = <&apcs1_mbox 8 0>;
 			qcom,smd-edge = <15>;
 
 			rpm_requests: rpm-requests {
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 9bafb3b350ff..38cb524cc568 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -1973,7 +1973,7 @@
 
 			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
 				 <&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
-				 <&pcie1_phy>,
+				 <&pcie1_phy QMP_PCIE_PIPE_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_PCIE_1_AUX_CLK>,
 				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
index 941dfddd6713..fdde988ae01e 100644
--- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
+++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
@@ -139,6 +139,8 @@
 
 		pinctrl-0 = <&nvme_reg_en>;
 		pinctrl-names = "default";
+
+		regulator-boot-on;
 	};
 
 	vph_pwr: regulator-vph-pwr {
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
index 20616bd4aa6c..fb4a48a1e2a8 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
@@ -134,6 +134,8 @@
 
 		pinctrl-0 = <&nvme_reg_en>;
 		pinctrl-names = "default";
+
+		regulator-boot-on;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
index 10b28d870f08..c6e0356ed9a2 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
@@ -177,9 +177,9 @@
 		compatible = "qcom,x1e80100-sndcard";
 		model = "X1E80100-CRD";
 		audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT",
-				"TwitterLeft IN", "WSA WSA_SPK2 OUT",
+				"TweeterLeft IN", "WSA WSA_SPK2 OUT",
 				"WooferRight IN", "WSA2 WSA_SPK2 OUT",
-				"TwitterRight IN", "WSA2 WSA_SPK2 OUT",
+				"TweeterRight IN", "WSA2 WSA_SPK2 OUT",
 				"IN1_HPHL", "HPHL_OUT",
 				"IN2_HPHR", "HPHR_OUT",
 				"AMIC2", "MIC BIAS2",
@@ -300,6 +300,8 @@
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&nvme_reg_en>;
+
+		regulator-boot-on;
 	};
 
 	vreg_wwan: regulator-wwan {
@@ -933,7 +935,7 @@
 		reg = <0 1>;
 		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
-		sound-name-prefix = "TwitterLeft";
+		sound-name-prefix = "TweeterLeft";
 		vdd-1p8-supply = <&vreg_l15b_1p8>;
 		vdd-io-supply = <&vreg_l12b_1p2>;
 		qcom,port-mapping = <4 5 6 7 11 13>;
@@ -986,7 +988,7 @@
 		reg = <0 1>;
 		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
-		sound-name-prefix = "TwitterRight";
+		sound-name-prefix = "TweeterRight";
 		vdd-1p8-supply = <&vreg_l15b_1p8>;
 		vdd-io-supply = <&vreg_l12b_1p2>;
 		qcom,port-mapping = <4 5 6 7 11 13>;
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
index 3c13331a9ef4..0cdaff9c8cf0 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
@@ -205,6 +205,8 @@
 
 		pinctrl-0 = <&nvme_reg_en>;
 		pinctrl-names = "default";
+
+		regulator-boot-on;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi
index 42e02ad6a9c3..cdb401767c42 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi
@@ -164,6 +164,8 @@
 
 		pinctrl-0 = <&nvme_reg_en>;
 		pinctrl-names = "default";
+
+		regulator-boot-on;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
index 1c3a6a7b3ed6..5ef030c60abe 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
@@ -253,6 +253,8 @@
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&nvme_reg_en>;
+
+		regulator-boot-on;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index a36076e3c56b..0510abc0edf0 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -2924,14 +2924,14 @@
 				    "mhi";
 			#address-cells = <3>;
 			#size-cells = <2>;
-			ranges = <0x01000000 0 0x00000000 0 0x70200000 0 0x100000>,
-				 <0x02000000 0 0x70300000 0 0x70300000 0 0x3d00000>;
-			bus-range = <0 0xff>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x70200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0x1d00000>;
+			bus-range = <0x00 0xff>;
 
 			dma-coherent;
 
 			linux,pci-domain = <6>;
-			num-lanes = <2>;
+			num-lanes = <4>;
 
 			interrupts = <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>,
@@ -2997,19 +2997,22 @@
 		};
 
 		pcie6a_phy: phy@1bfc000 {
-			compatible = "qcom,x1e80100-qmp-gen4x2-pcie-phy";
-			reg = <0 0x01bfc000 0 0x2000>;
+			compatible = "qcom,x1e80100-qmp-gen4x4-pcie-phy";
+			reg = <0 0x01bfc000 0 0x2000>,
+			      <0 0x01bfe000 0 0x2000>;
 
 			clocks = <&gcc GCC_PCIE_6A_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_6A_CFG_AHB_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&tcsr TCSR_PCIE_4L_CLKREF_EN>,
 				 <&gcc GCC_PCIE_6A_PHY_RCHNG_CLK>,
-				 <&gcc GCC_PCIE_6A_PIPE_CLK>;
+				 <&gcc GCC_PCIE_6A_PIPE_CLK>,
+				 <&gcc GCC_PCIE_6A_PIPEDIV2_CLK>;
 			clock-names = "aux",
 				      "cfg_ahb",
 				      "ref",
 				      "rchng",
-				      "pipe";
+				      "pipe",
+				      "pipediv2";
 
 			resets = <&gcc GCC_PCIE_6A_PHY_BCR>,
 				 <&gcc GCC_PCIE_6A_NOCSR_COM_PHY_BCR>;
@@ -3021,6 +3024,8 @@
 
 			power-domains = <&gcc GCC_PCIE_6_PHY_GDSC>;
 
+			qcom,4ln-config-sel = <&tcsr 0x1a000 0>;
+
 			#clock-cells = <0>;
 			clock-output-names = "pcie6a_pipe_clk";
 
@@ -3097,7 +3102,7 @@
 			assigned-clocks = <&gcc GCC_PCIE_5_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			interconnects = <&pcie_south_anoc MASTER_PCIE_5 QCOM_ICC_TAG_ALWAYS
+			interconnects = <&pcie_north_anoc MASTER_PCIE_5 QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
 					 &cnoc_main SLAVE_PCIE_5 QCOM_ICC_TAG_ALWAYS>;
@@ -3124,14 +3129,16 @@
 
 			clocks = <&gcc GCC_PCIE_5_AUX_CLK>,
 				 <&gcc GCC_PCIE_5_CFG_AHB_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&tcsr TCSR_PCIE_2L_5_CLKREF_EN>,
 				 <&gcc GCC_PCIE_5_PHY_RCHNG_CLK>,
-				 <&gcc GCC_PCIE_5_PIPE_CLK>;
+				 <&gcc GCC_PCIE_5_PIPE_CLK>,
+				 <&gcc GCC_PCIE_5_PIPEDIV2_CLK>;
 			clock-names = "aux",
 				      "cfg_ahb",
 				      "ref",
 				      "rchng",
-				      "pipe";
+				      "pipe",
+				      "pipediv2";
 
 			resets = <&gcc GCC_PCIE_5_PHY_BCR>;
 			reset-names = "phy";
@@ -3166,8 +3173,8 @@
 				    "mhi";
 			#address-cells = <3>;
 			#size-cells = <2>;
-			ranges = <0x01000000 0 0x00000000 0 0x7c200000 0 0x100000>,
-				 <0x02000000 0 0x7c300000 0 0x7c300000 0 0x3d00000>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x7c200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x7c300000 0x0 0x7c300000 0x0 0x1d00000>;
 			bus-range = <0x00 0xff>;
 
 			dma-coherent;
@@ -3217,7 +3224,7 @@
 			assigned-clocks = <&gcc GCC_PCIE_4_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			interconnects = <&pcie_south_anoc MASTER_PCIE_4 QCOM_ICC_TAG_ALWAYS
+			interconnects = <&pcie_north_anoc MASTER_PCIE_4 QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
 					 &cnoc_main SLAVE_PCIE_4 QCOM_ICC_TAG_ALWAYS>;
@@ -3254,14 +3261,16 @@
 
 			clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
 				 <&gcc GCC_PCIE_4_CFG_AHB_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&tcsr TCSR_PCIE_2L_4_CLKREF_EN>,
 				 <&gcc GCC_PCIE_4_PHY_RCHNG_CLK>,
-				 <&gcc GCC_PCIE_4_PIPE_CLK>;
+				 <&gcc GCC_PCIE_4_PIPE_CLK>,
+				 <&gcc GCC_PCIE_4_PIPEDIV2_CLK>;
 			clock-names = "aux",
 				      "cfg_ahb",
 				      "ref",
 				      "rchng",
-				      "pipe";
+				      "pipe",
+				      "pipediv2";
 
 			resets = <&gcc GCC_PCIE_4_PHY_BCR>;
 			reset-names = "phy";
@@ -6084,7 +6093,8 @@
 			      <0 0x25a00000 0 0x200000>,
 			      <0 0x25c00000 0 0x200000>,
 			      <0 0x25e00000 0 0x200000>,
-			      <0 0x26000000 0 0x200000>;
+			      <0 0x26000000 0 0x200000>,
+			      <0 0x26200000 0 0x200000>;
 			reg-names = "llcc0_base",
 				    "llcc1_base",
 				    "llcc2_base",
@@ -6093,7 +6103,8 @@
 				    "llcc5_base",
 				    "llcc6_base",
 				    "llcc7_base",
-				    "llcc_broadcast_base";
+				    "llcc_broadcast_base",
+				    "llcc_broadcast_and_base";
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
index bb1aea82e666..b7163ed74232 100644
--- a/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
@@ -66,7 +66,6 @@
 	bus-width = <8>;
 	cap-mmc-highspeed;
 	mmc-hs200-1_8v;
-	supports-emmc;
 	mmc-pwrseq = <&emmc_pwrseq>;
 	non-removable;
 	vmmc-supply = <&vcc_3v3>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
index 9232357f4fec..d9e191ad1d77 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
@@ -36,14 +36,14 @@
 
 		power_led: led-0 {
 			label = "firefly:red:power";
-			linux,default-trigger = "ir-power-click";
+			linux,default-trigger = "default-on";
 			default-state = "on";
 			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
 		};
 
 		user_led: led-1 {
 			label = "firefly:blue:user";
-			linux,default-trigger = "ir-user-click";
+			linux,default-trigger = "rc-feedback";
 			default-state = "off";
 			gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s-plus.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s-plus.dts
index cb81ba3f23ff..4b9ced67742d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s-plus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s-plus.dts
@@ -24,9 +24,7 @@
 	disable-wp;
 	mmc-hs200-1_8v;
 	non-removable;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
-	supports-emmc;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 16b4faa22e4f..c01a4cad48f3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -754,8 +754,7 @@
 		compatible = "rockchip,rk3328-dw-hdmi";
 		reg = <0x0 0xff3c0000 0x0 0x20000>;
 		reg-io-width = <4>;
-		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru PCLK_HDMI>,
 			 <&cru SCLK_HDMI_SFC>,
 			 <&cru SCLK_RTC32K>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
index 8ac8acf4082d..ab3fda69a1fb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
@@ -61,7 +61,6 @@
 			fan: fan@18 {
 				compatible = "ti,amc6821";
 				reg = <0x18>;
-				#cooling-cells = <2>;
 			};
 
 			rtc_twi: rtc@6f {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts b/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts
index 1489eb32e266..4feb78797982 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts
@@ -541,7 +541,7 @@
 	status = "okay";
 
 	rt5651: audio-codec@1a {
-		compatible = "rockchip,rt5651";
+		compatible = "realtek,rt5651";
 		reg = <0x1a>;
 		clocks = <&cru SCLK_I2S_8CH_OUT>;
 		clock-names = "mclk";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
index 1a44582a49fb..09a016ea8c76 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
@@ -166,7 +166,6 @@
 		regulator-max-microvolt = <1800000>;
 		vin-supply = <&vcc3v3_sys>;
 		gpio = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
 	};
 
 	/* MIPI DSI panel 2.8v supply */
@@ -178,7 +177,6 @@
 		regulator-max-microvolt = <2800000>;
 		vin-supply = <&vcc3v3_sys>;
 		gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
 	};
 
 	vibrator {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts
index 7ba1c28f70a9..2f06bfdd70bf 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts
@@ -114,7 +114,6 @@
 	es8388: es8388@11 {
 		compatible = "everest,es8388";
 		reg = <0x11>;
-		clock-names = "mclk";
 		clocks = <&cru SCLK_I2S_8CH_OUT>;
 		#sound-dai-cells = <0>;
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
index 8146f870d2bd..ab890e7b6c59 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
@@ -576,7 +576,7 @@
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
 		clocks = <&rk808 1>;
-		clock-names = "ext_clock";
+		clock-names = "txco";
 		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
 		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
 		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
index dbec2b7173a0..31ea3d0182c0 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
@@ -163,7 +163,7 @@
 	status = "okay";
 
 	rt5651: rt5651@1a {
-		compatible = "rockchip,rt5651";
+		compatible = "realtek,rt5651";
 		reg = <0x1a>;
 		clocks = <&cru SCLK_I2S_8CH_OUT>;
 		clock-names = "mclk";
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts
index a73cf30801ec..9816a4ed4599 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts
@@ -92,7 +92,7 @@
 };
 
 &i2c2 {
-	pintctrl-names = "default";
+	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2m1_xfer>;
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353v.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353v.dts
index e9954a33e8cd..a79a5614bcc8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353v.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353v.dts
@@ -79,7 +79,7 @@
 };
 
 &i2c2 {
-	pintctrl-names = "default";
+	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2m1_xfer>;
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
index 0c18406e4c59..7d4680933823 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
@@ -449,9 +449,9 @@
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
 		clocks = <&pmucru CLK_RTC_32K>;
-		clock-names = "ext_clock";
-		device-wake-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
-		host-wake-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+		clock-names = "txco";
+		device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
 		shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts b/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
index c1194d1e438d..9a2f59a351de 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
@@ -507,7 +507,6 @@
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
-	supports-emmc;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
index ae2536c65a83..0131f2cdd312 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
@@ -684,11 +684,11 @@
 		compatible = "brcm,bcm43438-bt";
 		clocks = <&rk817 1>;
 		clock-names = "lpo";
-		device-wake-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
-		host-wake-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
+		device-wakeup-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
 		pinctrl-0 = <&bt_enable_h>, <&bt_host_wake_l>, <&bt_wake_h>;
 		pinctrl-names = "default";
+		shutdown-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
 		vbat-supply = <&vcc_wl>;
 		vddio-supply = <&vcca_1v8_pmu>;
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
index 45de2630bb50..1e36f73840da 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
@@ -402,9 +402,9 @@
 		clock-names = "lpo";
 		device-wakeup-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>;
 		host-wakeup-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&bt_host_wake_h &bt_reg_on_h &bt_wake_host_h>;
+		shutdown-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
 		vbat-supply = <&vcc_3v3>;
 		vddio-supply = <&vcc_1v8>;
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-lubancat-2.dts b/arch/arm64/boot/dts/rockchip/rk3568-lubancat-2.dts
index a3112d5df200..b505a4537ee8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-lubancat-2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-lubancat-2.dts
@@ -589,7 +589,6 @@
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
-	supports-emmc;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3568-roc-pc.dts
index e333449ead04..2fa89a0eeafc 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-roc-pc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-roc-pc.dts
@@ -272,7 +272,6 @@
 				regulator-name = "vdd_logic";
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-init-microvolt = <900000>;
 				regulator-initial-mode = <0x2>;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1350000>;
@@ -285,7 +284,6 @@
 
 			vdd_gpu: DCDC_REG2 {
 				regulator-name = "vdd_gpu";
-				regulator-init-microvolt = <900000>;
 				regulator-initial-mode = <0x2>;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1350000>;
@@ -309,7 +307,6 @@
 
 			vdd_npu: DCDC_REG4 {
 				regulator-name = "vdd_npu";
-				regulator-init-microvolt = <900000>;
 				regulator-initial-mode = <0x2>;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1350000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
index d97d84b88837..fc67585b64b7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
@@ -337,15 +337,19 @@
 			cache-unified;
 			next-level-cache = <&l3_cache>;
 		};
+	};
 
-		l3_cache: l3-cache {
-			compatible = "cache";
-			cache-size = <3145728>;
-			cache-line-size = <64>;
-			cache-sets = <4096>;
-			cache-level = <3>;
-			cache-unified;
-		};
+	/*
+	 * The L3 cache belongs to the DynamIQ Shared Unit (DSU),
+	 * so it's represented here, outside the "cpus" node
+	 */
+	l3_cache: l3-cache {
+		compatible = "cache";
+		cache-size = <3145728>;
+		cache-line-size = <64>;
+		cache-sets = <4096>;
+		cache-level = <3>;
+		cache-unified;
 	};
 
 	display_subsystem: display-subsystem {
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
index c3a6812cc93a..dd4c79bcad87 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
@@ -328,7 +328,6 @@
 		compatible = "everest,es8388";
 		reg = <0x11>;
 		clocks = <&cru I2S0_8CH_MCLKOUT>;
-		clock-names = "mclk";
 		AVDD-supply = <&vcc_1v8_s0>;
 		DVDD-supply = <&vcc_1v8_s0>;
 		HPVDD-supply = <&vcc_3v3_s0>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts b/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts
index e4a20cda65ed..b38dab009ccc 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts
@@ -316,7 +316,6 @@
 		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
 		assigned-clock-rates = <12288000>;
 		clocks = <&cru I2S0_8CH_MCLKOUT>;
-		clock-names = "mclk";
 		AVDD-supply = <&avcc_1v8_codec_s0>;
 		DVDD-supply = <&avcc_1v8_codec_s0>;
 		HPVDD-supply = <&vcc_3v3_s0>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
index 966bbc582d89..6bd06e46a101 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
@@ -304,12 +304,12 @@
 	};
 
 	cooling-maps {
-		map1 {
+		map0 {
 			trip = <&package_fan0>;
 			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
 		};
 
-		map2 {
+		map1 {
 			trip = <&package_fan1>;
 			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
 		};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-toybrick-x0.dts b/arch/arm64/boot/dts/rockchip/rk3588-toybrick-x0.dts
index d0021524e7f9..328dcb894ccb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-toybrick-x0.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-toybrick-x0.dts
@@ -428,7 +428,6 @@
 				regulator-boot-on;
 				regulator-min-microvolt = <550000>;
 				regulator-max-microvolt = <950000>;
-				regulator-init-microvolt = <750000>;
 				regulator-ramp-delay = <12500>;
 
 				regulator-state-mem {
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi
index dbaa94ca69f4..432133251e31 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi
@@ -296,6 +296,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
 			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		system-power-controller;
 
 		vcc1-supply = <&vcc5v0_sys>;
 		vcc2-supply = <&vcc5v0_sys>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
index d8c50fdcca3b..8ba111d9283f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
@@ -377,7 +377,6 @@
 		assigned-clock-rates = <12288000>;
 		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
 		AVDD-supply = <&vcc_3v3_s3>;
-		clock-names = "mclk";
 		clocks = <&cru I2S0_8CH_MCLKOUT>;
 		DVDD-supply = <&vcc_1v8_s3>;
 		HPVDD-supply = <&vcc_3v3_s3>;
diff --git a/arch/riscv/boot/dts/sophgo/sg2042.dtsi b/arch/riscv/boot/dts/sophgo/sg2042.dtsi
index 4e5fa6591623..e62ac51ac55a 100644
--- a/arch/riscv/boot/dts/sophgo/sg2042.dtsi
+++ b/arch/riscv/boot/dts/sophgo/sg2042.dtsi
@@ -112,7 +112,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <32>;
+				ngpios = <32>;
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
@@ -134,7 +134,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <32>;
+				ngpios = <32>;
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
@@ -156,7 +156,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <32>;
+				ngpios = <32>;
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
index c7771b3b6475..d6c55f1cc96a 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
@@ -128,7 +128,6 @@
 	assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>,
 			  <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>;
 	assigned-clock-rates = <49500000>, <198000000>;
-	status = "okay";
 
 	ports {
 		#address-cells = <1>;
@@ -151,7 +150,6 @@
 &csi2rx {
 	assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>;
 	assigned-clock-rates = <297000000>;
-	status = "okay";
 
 	ports {
 		#address-cells = <1>;
diff --git a/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
index b720cdd15ed6..8e39fdc73ecb 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
+++ b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
@@ -44,8 +44,7 @@
 };
 
 &phy0 {
-	rx-internal-delay-ps = <1900>;
-	tx-internal-delay-ps = <1500>;
+	rx-internal-delay-ps = <1500>;
 	motorcomm,rx-clk-drv-microamp = <2910>;
 	motorcomm,rx-data-drv-microamp = <2910>;
 	motorcomm,tx-clk-adj-enabled;
diff --git a/drivers/edac/qcom_edac.c b/drivers/edac/qcom_edac.c
index d3cd4cc54ace..a9a8ba067007 100644
--- a/drivers/edac/qcom_edac.c
+++ b/drivers/edac/qcom_edac.c
@@ -342,9 +342,11 @@ static int qcom_llcc_edac_probe(struct platform_device *pdev)
 	int ecc_irq;
 	int rc;
 
-	rc = qcom_llcc_core_setup(llcc_driv_data, llcc_driv_data->bcast_regmap);
-	if (rc)
-		return rc;
+	if (!llcc_driv_data->ecc_irq_configured) {
+		rc = qcom_llcc_core_setup(llcc_driv_data, llcc_driv_data->bcast_regmap);
+		if (rc)
+			return rc;
+	}
 
 	/* Allocate edac control info */
 	edev_ctl = edac_device_alloc_ctl_info(0, "qcom-llcc", 1, "bank",
diff --git a/drivers/firmware/arm_scmi/bus.c b/drivers/firmware/arm_scmi/bus.c
index 96b2e5f9a8ef..157172a5f2b5 100644
--- a/drivers/firmware/arm_scmi/bus.c
+++ b/drivers/firmware/arm_scmi/bus.c
@@ -325,7 +325,10 @@ EXPORT_SYMBOL_GPL(scmi_driver_unregister);
 
 static void scmi_device_release(struct device *dev)
 {
-	kfree(to_scmi_dev(dev));
+	struct scmi_device *scmi_dev = to_scmi_dev(dev);
+
+	kfree_const(scmi_dev->name);
+	kfree(scmi_dev);
 }
 
 static void __scmi_device_destroy(struct scmi_device *scmi_dev)
@@ -338,7 +341,6 @@ static void __scmi_device_destroy(struct scmi_device *scmi_dev)
 	if (scmi_dev->protocol_id == SCMI_PROTOCOL_SYSTEM)
 		atomic_set(&scmi_syspower_registered, 0);
 
-	kfree_const(scmi_dev->name);
 	ida_free(&scmi_bus_id, scmi_dev->id);
 	device_unregister(&scmi_dev->dev);
 }
@@ -410,7 +412,6 @@ __scmi_device_create(struct device_node *np, struct device *parent,
 
 	return scmi_dev;
 put_dev:
-	kfree_const(scmi_dev->name);
 	put_device(&scmi_dev->dev);
 	ida_free(&scmi_bus_id, id);
 	return NULL;
diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
index c4b8e7ff88aa..cdec50a698a1 100644
--- a/drivers/firmware/arm_scmi/common.h
+++ b/drivers/firmware/arm_scmi/common.h
@@ -163,6 +163,7 @@ void scmi_protocol_release(const struct scmi_handle *handle, u8 protocol_id);
  *      used to initialize this channel
  * @dev: Reference to device in the SCMI hierarchy corresponding to this
  *	 channel
+ * @is_p2a: A flag to identify a channel as P2A (RX)
  * @rx_timeout_ms: The configured RX timeout in milliseconds.
  * @handle: Pointer to SCMI entity handle
  * @no_completion_irq: Flag to indicate that this channel has no completion
@@ -174,6 +175,7 @@ void scmi_protocol_release(const struct scmi_handle *handle, u8 protocol_id);
 struct scmi_chan_info {
 	int id;
 	struct device *dev;
+	bool is_p2a;
 	unsigned int rx_timeout_ms;
 	struct scmi_handle *handle;
 	bool no_completion_irq;
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index a477b5ade38d..f8934d049d68 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -1048,6 +1048,11 @@ static inline void scmi_xfer_command_release(struct scmi_info *info,
 static inline void scmi_clear_channel(struct scmi_info *info,
 				      struct scmi_chan_info *cinfo)
 {
+	if (!cinfo->is_p2a) {
+		dev_warn(cinfo->dev, "Invalid clear on A2P channel !\n");
+		return;
+	}
+
 	if (info->desc->ops->clear_channel)
 		info->desc->ops->clear_channel(cinfo);
 }
@@ -2638,6 +2643,7 @@ static int scmi_chan_setup(struct scmi_info *info, struct device_node *of_node,
 	if (!cinfo)
 		return -ENOMEM;
 
+	cinfo->is_p2a = !tx;
 	cinfo->rx_timeout_ms = info->desc->max_rx_timeout_ms;
 
 	/* Create a unique name for this transport device */
@@ -3042,10 +3048,10 @@ static const struct scmi_desc *scmi_transport_setup(struct device *dev)
 
 	dev_info(dev, "Using %s\n", dev_driver_string(trans->supplier));
 
-	ret = of_property_read_u32(dev->of_node, "max-rx-timeout-ms",
+	ret = of_property_read_u32(dev->of_node, "arm,max-rx-timeout-ms",
 				   &trans->desc->max_rx_timeout_ms);
 	if (ret && ret != -EINVAL)
-		dev_err(dev, "Malformed max-rx-timeout-ms DT property.\n");
+		dev_err(dev, "Malformed arm,max-rx-timeout-ms DT property.\n");
 
 	dev_info(dev, "SCMI max-rx-timeout: %dms\n",
 		 trans->desc->max_rx_timeout_ms);
diff --git a/drivers/firmware/microchip/mpfs-auto-update.c b/drivers/firmware/microchip/mpfs-auto-update.c
index 9ca5ee58edbd..0f7ec8848202 100644
--- a/drivers/firmware/microchip/mpfs-auto-update.c
+++ b/drivers/firmware/microchip/mpfs-auto-update.c
@@ -76,14 +76,11 @@
 #define AUTO_UPDATE_INFO_SIZE		SZ_1M
 #define AUTO_UPDATE_BITSTREAM_BASE	(AUTO_UPDATE_DIRECTORY_SIZE + AUTO_UPDATE_INFO_SIZE)
 
-#define AUTO_UPDATE_TIMEOUT_MS		60000
-
 struct mpfs_auto_update_priv {
 	struct mpfs_sys_controller *sys_controller;
 	struct device *dev;
 	struct mtd_info *flash;
 	struct fw_upload *fw_uploader;
-	struct completion programming_complete;
 	size_t size_per_bitstream;
 	bool cancel_request;
 };
@@ -156,19 +153,6 @@ static void mpfs_auto_update_cancel(struct fw_upload *fw_uploader)
 
 static enum fw_upload_err mpfs_auto_update_poll_complete(struct fw_upload *fw_uploader)
 {
-	struct mpfs_auto_update_priv *priv = fw_uploader->dd_handle;
-	int ret;
-
-	/*
-	 * There is no meaningful way to get the status of the programming while
-	 * it is in progress, so attempting anything other than waiting for it
-	 * to complete would be misplaced.
-	 */
-	ret = wait_for_completion_timeout(&priv->programming_complete,
-					  msecs_to_jiffies(AUTO_UPDATE_TIMEOUT_MS));
-	if (!ret)
-		return FW_UPLOAD_ERR_TIMEOUT;
-
 	return FW_UPLOAD_ERR_NONE;
 }
 
@@ -349,33 +333,23 @@ static enum fw_upload_err mpfs_auto_update_write(struct fw_upload *fw_uploader,
 						 u32 offset, u32 size, u32 *written)
 {
 	struct mpfs_auto_update_priv *priv = fw_uploader->dd_handle;
-	enum fw_upload_err err = FW_UPLOAD_ERR_NONE;
 	int ret;
 
-	reinit_completion(&priv->programming_complete);
-
 	ret = mpfs_auto_update_write_bitstream(fw_uploader, data, offset, size, written);
-	if (ret) {
-		err = FW_UPLOAD_ERR_RW_ERROR;
-		goto out;
-	}
+	if (ret)
+		return FW_UPLOAD_ERR_RW_ERROR;
 
-	if (priv->cancel_request) {
-		err = FW_UPLOAD_ERR_CANCELED;
-		goto out;
-	}
+	if (priv->cancel_request)
+		return FW_UPLOAD_ERR_CANCELED;
 
 	if (mpfs_auto_update_is_bitstream_info(data, size))
-		goto out;
+		return FW_UPLOAD_ERR_NONE;
 
 	ret = mpfs_auto_update_verify_image(fw_uploader);
 	if (ret)
-		err = FW_UPLOAD_ERR_FW_INVALID;
+		return FW_UPLOAD_ERR_FW_INVALID;
 
-out:
-	complete(&priv->programming_complete);
-
-	return err;
+	return FW_UPLOAD_ERR_NONE;
 }
 
 static const struct fw_upload_ops mpfs_auto_update_ops = {
@@ -461,8 +435,6 @@ static int mpfs_auto_update_probe(struct platform_device *pdev)
 		return dev_err_probe(dev, ret,
 				     "The current bitstream does not support auto-update\n");
 
-	init_completion(&priv->programming_complete);
-
 	fw_uploader = firmware_upload_register(THIS_MODULE, dev, "mpfs-auto-update",
 					       &mpfs_auto_update_ops, priv);
 	if (IS_ERR(fw_uploader))
diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c
index 10986cb11ec0..2e4260ba5f79 100644
--- a/drivers/firmware/qcom/qcom_scm.c
+++ b/drivers/firmware/qcom/qcom_scm.c
@@ -112,6 +112,7 @@ enum qcom_scm_qseecom_tz_cmd_info {
 };
 
 #define QSEECOM_MAX_APP_NAME_SIZE		64
+#define SHMBRIDGE_RESULT_NOTSUPP		4
 
 /* Each bit configures cold/warm boot address for one of the 4 CPUs */
 static const u8 qcom_scm_cpu_cold_bits[QCOM_SCM_BOOT_MAX_CPUS] = {
@@ -216,7 +217,7 @@ static DEFINE_SPINLOCK(scm_query_lock);
 
 struct qcom_tzmem_pool *qcom_scm_get_tzmem_pool(void)
 {
-	return __scm->mempool;
+	return __scm ? __scm->mempool : NULL;
 }
 
 static enum qcom_scm_convention __get_convention(void)
@@ -545,7 +546,7 @@ static void qcom_scm_set_download_mode(u32 dload_mode)
 	} else if (__qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_BOOT,
 						QCOM_SCM_BOOT_SET_DLOAD_MODE)) {
 		ret = __qcom_scm_set_dload_mode(__scm->dev, !!dload_mode);
-	} else {
+	} else if (dload_mode) {
 		dev_err(__scm->dev,
 			"No available mechanism for setting download mode\n");
 	}
@@ -1361,6 +1362,8 @@ EXPORT_SYMBOL_GPL(qcom_scm_lmh_dcvsh_available);
 
 int qcom_scm_shm_bridge_enable(void)
 {
+	int ret;
+
 	struct qcom_scm_desc desc = {
 		.svc = QCOM_SCM_SVC_MP,
 		.cmd = QCOM_SCM_MP_SHM_BRIDGE_ENABLE,
@@ -1373,7 +1376,15 @@ int qcom_scm_shm_bridge_enable(void)
 					  QCOM_SCM_MP_SHM_BRIDGE_ENABLE))
 		return -EOPNOTSUPP;
 
-	return qcom_scm_call(__scm->dev, &desc, &res) ?: res.result[0];
+	ret = qcom_scm_call(__scm->dev, &desc, &res);
+
+	if (ret)
+		return ret;
+
+	if (res.result[0] == SHMBRIDGE_RESULT_NOTSUPP)
+		return -EOPNOTSUPP;
+
+	return res.result[0];
 }
 EXPORT_SYMBOL_GPL(qcom_scm_shm_bridge_enable);
 
diff --git a/drivers/rpmsg/qcom_glink_native.c b/drivers/rpmsg/qcom_glink_native.c
index 0b2f29006908..d3af1dfa3c7d 100644
--- a/drivers/rpmsg/qcom_glink_native.c
+++ b/drivers/rpmsg/qcom_glink_native.c
@@ -1440,14 +1440,18 @@ static int qcom_glink_request_intent(struct qcom_glink *glink,
 		goto unlock;
 
 	ret = wait_event_timeout(channel->intent_req_wq,
-				 READ_ONCE(channel->intent_req_result) >= 0 &&
-				 READ_ONCE(channel->intent_received),
+				 READ_ONCE(channel->intent_req_result) == 0 ||
+				 (READ_ONCE(channel->intent_req_result) > 0 &&
+				  READ_ONCE(channel->intent_received)) ||
+				 glink->abort_tx,
 				 10 * HZ);
 	if (!ret) {
 		dev_err(glink->dev, "intent request timed out\n");
 		ret = -ETIMEDOUT;
+	} else if (glink->abort_tx) {
+		ret = -ECANCELED;
 	} else {
-		ret = READ_ONCE(channel->intent_req_result) ? 0 : -ECANCELED;
+		ret = READ_ONCE(channel->intent_req_result) ? 0 : -EAGAIN;
 	}
 
 unlock:
diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
index 8fa4ffd3a9b5..28bcc65e91be 100644
--- a/drivers/soc/qcom/llcc-qcom.c
+++ b/drivers/soc/qcom/llcc-qcom.c
@@ -139,6 +139,7 @@ struct qcom_llcc_config {
 	int size;
 	bool need_llcc_cfg;
 	bool no_edac;
+	bool irq_configured;
 };
 
 struct qcom_sct_config {
@@ -718,6 +719,7 @@ static const struct qcom_llcc_config x1e80100_cfg[] = {
 		.need_llcc_cfg	= true,
 		.reg_offset	= llcc_v2_1_reg_offset,
 		.edac_reg_offset = &llcc_v2_1_edac_reg_offset,
+		.irq_configured = true,
 	},
 };
 
@@ -1345,6 +1347,7 @@ static int qcom_llcc_probe(struct platform_device *pdev)
 	drv_data->cfg = llcc_cfg;
 	drv_data->cfg_size = sz;
 	drv_data->edac_reg_offset = cfg->edac_reg_offset;
+	drv_data->ecc_irq_configured = cfg->irq_configured;
 	mutex_init(&drv_data->lock);
 	platform_set_drvdata(pdev, drv_data);
 
diff --git a/drivers/soc/qcom/pmic_glink.c b/drivers/soc/qcom/pmic_glink.c
index 9606222993fd..baa4ac6704a9 100644
--- a/drivers/soc/qcom/pmic_glink.c
+++ b/drivers/soc/qcom/pmic_glink.c
@@ -4,6 +4,7 @@
  * Copyright (c) 2022, Linaro Ltd
  */
 #include <linux/auxiliary_bus.h>
+#include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
@@ -13,6 +14,8 @@
 #include <linux/soc/qcom/pmic_glink.h>
 #include <linux/spinlock.h>
 
+#define PMIC_GLINK_SEND_TIMEOUT (5 * HZ)
+
 enum {
 	PMIC_GLINK_CLIENT_BATT = 0,
 	PMIC_GLINK_CLIENT_ALTMODE,
@@ -112,13 +115,29 @@ EXPORT_SYMBOL_GPL(pmic_glink_client_register);
 int pmic_glink_send(struct pmic_glink_client *client, void *data, size_t len)
 {
 	struct pmic_glink *pg = client->pg;
+	bool timeout_reached = false;
+	unsigned long start;
 	int ret;
 
 	mutex_lock(&pg->state_lock);
-	if (!pg->ept)
+	if (!pg->ept) {
 		ret = -ECONNRESET;
-	else
-		ret = rpmsg_send(pg->ept, data, len);
+	} else {
+		start = jiffies;
+		for (;;) {
+			ret = rpmsg_send(pg->ept, data, len);
+			if (ret != -EAGAIN)
+				break;
+
+			if (timeout_reached) {
+				ret = -ETIMEDOUT;
+				break;
+			}
+
+			usleep_range(1000, 5000);
+			timeout_reached = time_after(jiffies, start + PMIC_GLINK_SEND_TIMEOUT);
+		}
+	}
 	mutex_unlock(&pg->state_lock);
 
 	return ret;
diff --git a/drivers/soc/qcom/socinfo.c b/drivers/soc/qcom/socinfo.c
index 64fc4f41da77..ecfd3da9d5e8 100644
--- a/drivers/soc/qcom/socinfo.c
+++ b/drivers/soc/qcom/socinfo.c
@@ -786,10 +786,16 @@ static int qcom_socinfo_probe(struct platform_device *pdev)
 	qs->attr.revision = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%u.%u",
 					   SOCINFO_MAJOR(le32_to_cpu(info->ver)),
 					   SOCINFO_MINOR(le32_to_cpu(info->ver)));
-	if (offsetof(struct socinfo, serial_num) <= item_size)
+	if (!qs->attr.soc_id || !qs->attr.revision)
+		return -ENOMEM;
+
+	if (offsetof(struct socinfo, serial_num) <= item_size) {
 		qs->attr.serial_number = devm_kasprintf(&pdev->dev, GFP_KERNEL,
 							"%u",
 							le32_to_cpu(info->serial_num));
+		if (!qs->attr.serial_number)
+			return -ENOMEM;
+	}
 
 	qs->soc_dev = soc_device_register(&qs->attr);
 	if (IS_ERR(qs->soc_dev))
diff --git a/include/linux/soc/qcom/llcc-qcom.h b/include/linux/soc/qcom/llcc-qcom.h
index 9e9f528b1370..2f20281d4ad4 100644
--- a/include/linux/soc/qcom/llcc-qcom.h
+++ b/include/linux/soc/qcom/llcc-qcom.h
@@ -125,6 +125,7 @@ struct llcc_edac_reg_offset {
  * @num_banks: Number of llcc banks
  * @bitmap: Bit map to track the active slice ids
  * @ecc_irq: interrupt for llcc cache error detection and reporting
+ * @ecc_irq_configured: 'True' if firmware has already configured the irq propagation
  * @version: Indicates the LLCC version
  */
 struct llcc_drv_data {
@@ -139,6 +140,7 @@ struct llcc_drv_data {
 	u32 num_banks;
 	unsigned long *bitmap;
 	int ecc_irq;
+	bool ecc_irq_configured;
 	u32 version;
 };