octeontx2-pf: Enable PTP PPS output support

PTP block supports generating PPS output signal on GPIO pin. This patch
adds the support in the PTP PHC driver using standard periodic output
interface.

User can enable/disable/configure PPS by writing to the below sysfs entry

echo perout.index start.sec start.nsec period.sec period.nsec >
/sys/class/ptp/ptp0/period

Example to generate 50% duty cycle PPS signal:
echo 0 0 0 0 500000000 >  /sys/class/ptp/ptp0/period

Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 85 insertions, 37 deletions

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
index 6b5b06c2b4e9..c5bd7747fc0e 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
@@ -1574,7 +1574,7 @@ enum ptp_op {
 	PTP_OP_GET_CLOCK = 1,
 	PTP_OP_GET_TSTMP = 2,
 	PTP_OP_SET_THRESH = 3,
-	PTP_OP_EXTTS_ON = 4,
+	PTP_OP_PPS_ON = 4,
 	PTP_OP_ADJTIME = 5,
 	PTP_OP_SET_CLOCK = 6,
 };
@@ -1584,7 +1584,8 @@ struct ptp_req {
 	u8 op;
 	s64 scaled_ppm;
 	u64 thresh;
-	int extts_on;
+	u64 period;
+	int pps_on;
 	s64 delta;
 	u64 clk;
 };
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/ptp.c b/drivers/net/ethernet/marvell/octeontx2/af/ptp.c
index ffbd22797163..bcc96eed2481 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/ptp.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/ptp.c
@@ -46,6 +46,7 @@
 
 #define PTP_PPS_HI_INCR				0xF60ULL
 #define PTP_PPS_LO_INCR				0xF68ULL
+#define PTP_PPS_THRESH_LO			0xF50ULL
 #define PTP_PPS_THRESH_HI			0xF58ULL
 
 #define PTP_CLOCK_LO				0xF08ULL
@@ -411,29 +412,12 @@ void ptp_start(struct rvu *rvu, u64 sclk, u32 ext_clk_freq, u32 extts)
 	}
 
 	clock_cfg |= PTP_CLOCK_CFG_PTP_EN;
-	clock_cfg |= PTP_CLOCK_CFG_PPS_EN | PTP_CLOCK_CFG_PPS_INV;
 	writeq(clock_cfg, ptp->reg_base + PTP_CLOCK_CFG);
 	clock_cfg = readq(ptp->reg_base + PTP_CLOCK_CFG);
 	clock_cfg &= ~PTP_CLOCK_CFG_ATOMIC_OP_MASK;
 	clock_cfg |= (ATOMIC_SET << 26);
 	writeq(clock_cfg, ptp->reg_base + PTP_CLOCK_CFG);
 
-	/* Set 50% duty cycle for 1Hz output */
-	writeq(0x1dcd650000000000, ptp->reg_base + PTP_PPS_HI_INCR);
-	writeq(0x1dcd650000000000, ptp->reg_base + PTP_PPS_LO_INCR);
-	if (cn10k_ptp_errata(ptp)) {
-		/* The ptp_clock_hi rollsover to zero once clock cycle before it
-		 * reaches one second boundary. so, program the pps_lo_incr in
-		 * such a way that the pps threshold value comparison at one
-		 * second boundary will succeed and pps edge changes. After each
-		 * one second boundary, the hrtimer handler will be invoked and
-		 * reprograms the pps threshold value.
-		 */
-		ptp->clock_period = NSEC_PER_SEC / ptp->clock_rate;
-		writeq((0x1dcd6500ULL - ptp->clock_period) << 32,
-		       ptp->reg_base + PTP_PPS_LO_INCR);
-	}
-
 	if (cn10k_ptp_errata(ptp))
 		clock_comp = ptp_calc_adjusted_comp(ptp->clock_rate);
 	else
@@ -465,20 +449,68 @@ static int ptp_set_thresh(struct ptp *ptp, u64 thresh)
 	return 0;
 }
 
-static int ptp_extts_on(struct ptp *ptp, int on)
+static int ptp_config_hrtimer(struct ptp *ptp, int on)
 {
 	u64 ptp_clock_hi;
 
-	if (cn10k_ptp_errata(ptp)) {
-		if (on) {
-			ptp_clock_hi = readq(ptp->reg_base + PTP_CLOCK_HI);
-			ptp_hrtimer_start(ptp, (ktime_t)ptp_clock_hi);
-		} else {
-			if (hrtimer_active(&ptp->hrtimer))
-				hrtimer_cancel(&ptp->hrtimer);
+	if (on) {
+		ptp_clock_hi = readq(ptp->reg_base + PTP_CLOCK_HI);
+		ptp_hrtimer_start(ptp, (ktime_t)ptp_clock_hi);
+	} else {
+		if (hrtimer_active(&ptp->hrtimer))
+			hrtimer_cancel(&ptp->hrtimer);
+	}
+
+	return 0;
+}
+
+static int ptp_pps_on(struct ptp *ptp, int on, u64 period)
+{
+	u64 clock_cfg;
+
+	clock_cfg = readq(ptp->reg_base + PTP_CLOCK_CFG);
+	if (on) {
+		if (cn10k_ptp_errata(ptp) && period != NSEC_PER_SEC) {
+			dev_err(&ptp->pdev->dev, "Supports max period value as 1 second\n");
+			return -EINVAL;
 		}
+
+		if (period > (8 * NSEC_PER_SEC)) {
+			dev_err(&ptp->pdev->dev, "Supports max period as 8 seconds\n");
+			return -EINVAL;
+		}
+
+		clock_cfg |= PTP_CLOCK_CFG_PPS_EN | PTP_CLOCK_CFG_PPS_INV;
+		writeq(clock_cfg, ptp->reg_base + PTP_CLOCK_CFG);
+
+		writeq(0, ptp->reg_base + PTP_PPS_THRESH_HI);
+		writeq(0, ptp->reg_base + PTP_PPS_THRESH_LO);
+
+		/* Configure high/low phase time */
+		period = period / 2;
+		writeq(((u64)period << 32), ptp->reg_base + PTP_PPS_HI_INCR);
+		writeq(((u64)period << 32), ptp->reg_base + PTP_PPS_LO_INCR);
+	} else {
+		clock_cfg &= ~(PTP_CLOCK_CFG_PPS_EN | PTP_CLOCK_CFG_PPS_INV);
+		writeq(clock_cfg, ptp->reg_base + PTP_CLOCK_CFG);
 	}
 
+	if (on && cn10k_ptp_errata(ptp)) {
+		/* The ptp_clock_hi rollsover to zero once clock cycle before it
+		 * reaches one second boundary. so, program the pps_lo_incr in
+		 * such a way that the pps threshold value comparison at one
+		 * second boundary will succeed and pps edge changes. After each
+		 * one second boundary, the hrtimer handler will be invoked and
+		 * reprograms the pps threshold value.
+		 */
+		ptp->clock_period = NSEC_PER_SEC / ptp->clock_rate;
+		writeq((0x1dcd6500ULL - ptp->clock_period) << 32,
+		       ptp->reg_base + PTP_PPS_LO_INCR);
+	}
+
+	if (cn10k_ptp_errata(ptp))
+		ptp_config_hrtimer(ptp, on);
+
 	return 0;
 }
 
@@ -613,8 +645,8 @@ int rvu_mbox_handler_ptp_op(struct rvu *rvu, struct ptp_req *req,
 	case PTP_OP_SET_THRESH:
 		err = ptp_set_thresh(rvu->ptp, req->thresh);
 		break;
-	case PTP_OP_EXTTS_ON:
-		err = ptp_extts_on(rvu->ptp, req->extts_on);
+	case PTP_OP_PPS_ON:
+		err = ptp_pps_on(rvu->ptp, req->pps_on, req->period);
 		break;
 	case PTP_OP_ADJTIME:
 		ptp_atomic_adjtime(rvu->ptp, req->delta);
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ptp.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ptp.c
index 3a72b0793d4a..63130ba37e9d 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ptp.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ptp.c
@@ -175,7 +175,7 @@ static int ptp_set_thresh(struct otx2_ptp *ptp, u64 thresh)
 	return otx2_sync_mbox_msg(&ptp->nic->mbox);
 }
 
-static int ptp_extts_on(struct otx2_ptp *ptp, int on)
+static int ptp_pps_on(struct otx2_ptp *ptp, int on, u64 period)
 {
 	struct ptp_req *req;
 
@@ -186,8 +186,9 @@ static int ptp_extts_on(struct otx2_ptp *ptp, int on)
 	if (!req)
 		return -ENOMEM;
 
-	req->op = PTP_OP_EXTTS_ON;
-	req->extts_on = on;
+	req->op = PTP_OP_PPS_ON;
+	req->pps_on = on;
+	req->period = period;
 
 	return otx2_sync_mbox_msg(&ptp->nic->mbox);
 }
@@ -276,8 +277,8 @@ static int otx2_ptp_verify_pin(struct ptp_clock_info *ptp, unsigned int pin,
 	switch (func) {
 	case PTP_PF_NONE:
 	case PTP_PF_EXTTS:
-		break;
 	case PTP_PF_PEROUT:
+		break;
 	case PTP_PF_PHYSYNC:
 		return -1;
 	}
@@ -340,6 +341,7 @@ static int otx2_ptp_enable(struct ptp_clock_info *ptp_info,
 {
 	struct otx2_ptp *ptp = container_of(ptp_info, struct otx2_ptp,
 					    ptp_info);
+	u64 period = 0;
 	int pin;
 
 	if (!ptp->nic)
@@ -351,12 +353,24 @@ static int otx2_ptp_enable(struct ptp_clock_info *ptp_info,
 				   rq->extts.index);
 		if (pin < 0)
 			return -EBUSY;
-		if (on) {
-			ptp_extts_on(ptp, on);
+		if (on)
 			schedule_delayed_work(&ptp->extts_work, msecs_to_jiffies(200));
-		} else {
-			ptp_extts_on(ptp, on);
+		else
 			cancel_delayed_work_sync(&ptp->extts_work);
+
+		return 0;
+	case PTP_CLK_REQ_PEROUT:
+		if (rq->perout.flags)
+			return -EOPNOTSUPP;
+
+		if (rq->perout.index >= ptp_info->n_pins)
+			return -EINVAL;
+		if (on) {
+			period = rq->perout.period.sec * NSEC_PER_SEC +
+				 rq->perout.period.nsec;
+			ptp_pps_on(ptp, on, period);
+		} else {
+			ptp_pps_on(ptp, on, period);
 		}
 		return 0;
 	default:
@@ -411,6 +425,7 @@ int otx2_ptp_init(struct otx2_nic *pfvf)
 		.name           = "OcteonTX2 PTP",
 		.max_adj        = 1000000000ull,
 		.n_ext_ts       = 1,
+		.n_per_out      = 1,
 		.n_pins         = 1,
 		.pps            = 0,
 		.pin_config     = &ptp_ptr->extts_config,