diff options
| author | Jernej Skrabec <jernej.skrabec@gmail.com> | 2021-07-22 18:12:19 +0200 |
|---|---|---|
| committer | Maxime Ripard <maxime@cerno.tech> | 2021-07-26 09:11:45 +0200 |
| commit | 35f2f8b802c1a80bdbd664c7158bc76e662315a3 (patch) | |
| tree | 1aa09922fbdda4bbc23f5267ba4863203e2b5ed5 | |
| parent | 7ab1f6539762946de06ca14d7401ae123821bc40 (diff) | |
arm64: dts: allwinner: h6: tanix-tx6: Add PIO power supplies
While there is no publicly available schematic of this board, it's not
hard to determine voltage of GPIO port C, D and G (only ones which can
be set).
Port C and G are used for MMC/SDIO communication, so they use 1.8 V
power supply. It's not clear if port D is even used, but if it is, it's
pretty safe to assume it uses 3.3 V power supply. Value read from PIO
Group Withstand Voltage Mode Select register from within pre-installed
Android agrees with that assesment.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210722161220.51181-3-jernej.skrabec@gmail.com
| -rw-r--r-- | arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts | 13 |
1 files changed, 13 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts index 02641191682e..cf9721ca6370 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts @@ -32,6 +32,13 @@ }; }; + reg_vcc1v8: regulator-vcc1v8 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + reg_vcc3v3: regulator-vcc3v3 { compatible = "regulator-fixed"; regulator-name = "vcc3v3"; @@ -99,6 +106,12 @@ status = "okay"; }; +&pio { + vcc-pc-supply = <®_vcc1v8>; + vcc-pd-supply = <®_vcc3v3>; + vcc-pg-supply = <®_vcc1v8>; +}; + &r_ir { linux,rc-map-name = "rc-tanix-tx5max"; status = "okay"; |