diff options
| author | Sasha Finkelstein <fnkl.kernel@gmail.com> | 2025-02-25 22:19:54 +0100 |
|---|---|---|
| committer | Sven Peter <sven@svenpeter.dev> | 2025-02-26 15:33:46 +0000 |
| commit | 44db68dee1f77260d7037319e911e9883a6ffe0e (patch) | |
| tree | 535e65f77bd520f09d46b31ad11fdcd10555b57d | |
| parent | 3febe9de5ca5267618675650871a626d0901f8cb (diff) | |
arm64: dts: apple: Add touchbar digitizer nodes
Adds device tree entries for the touchbar digitizer
Co-developed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Acked-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Link: https://lore.kernel.org/r/20250225-z2-dts-v1-1-df101a7c17c8@gmail.com
Signed-off-by: Sven Peter <sven@svenpeter.dev>
| -rw-r--r-- | arch/arm64/boot/dts/apple/t8103-j293.dts | 27 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/apple/t8112-j493.dts | 23 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/apple/t8112.dtsi | 2 |
3 files changed, 51 insertions, 1 deletions
diff --git a/arch/arm64/boot/dts/apple/t8103-j293.dts b/arch/arm64/boot/dts/apple/t8103-j293.dts index 56b0c67bfcda..0a93d3891c23 100644 --- a/arch/arm64/boot/dts/apple/t8103-j293.dts +++ b/arch/arm64/boot/dts/apple/t8103-j293.dts @@ -17,6 +17,14 @@ compatible = "apple,j293", "apple,t8103", "apple,arm-platform"; model = "Apple MacBook Pro (13-inch, M1, 2020)"; + /* + * All of those are used by the bootloader to pass calibration + * blobs and other device-specific properties + */ + aliases { + touchbar0 = &touchbar0; + }; + led-controller { compatible = "pwm-leds"; led-0 { @@ -49,3 +57,22 @@ &fpwm1 { status = "okay"; }; + +&spi0 { + cs-gpios = <&pinctrl_ap 109 GPIO_ACTIVE_LOW>; + status = "okay"; + + touchbar0: touchbar@0 { + compatible = "apple,j293-touchbar"; + reg = <0>; + spi-max-frequency = <11500000>; + spi-cs-setup-delay-ns = <2000>; + spi-cs-hold-delay-ns = <2000>; + reset-gpios = <&pinctrl_ap 139 GPIO_ACTIVE_LOW>; + interrupts-extended = <&pinctrl_ap 194 IRQ_TYPE_EDGE_FALLING>; + firmware-name = "apple/dfrmtfw-j293.bin"; + touchscreen-size-x = <23045>; + touchscreen-size-y = <640>; + touchscreen-inverted-y; + }; +}; diff --git a/arch/arm64/boot/dts/apple/t8112-j493.dts b/arch/arm64/boot/dts/apple/t8112-j493.dts index 0ad908349f55..045bd0716cb7 100644 --- a/arch/arm64/boot/dts/apple/t8112-j493.dts +++ b/arch/arm64/boot/dts/apple/t8112-j493.dts @@ -17,8 +17,13 @@ compatible = "apple,j493", "apple,t8112", "apple,arm-platform"; model = "Apple MacBook Pro (13-inch, M2, 2022)"; + /* + * All of those are used by the bootloader to pass calibration + * blobs and other device-specific properties + */ aliases { bluetooth0 = &bluetooth0; + touchbar0 = &touchbar0; wifi0 = &wifi0; }; @@ -67,3 +72,21 @@ &fpwm1 { status = "okay"; }; + +&spi3 { + status = "okay"; + + touchbar0: touchbar@0 { + compatible = "apple,j493-touchbar"; + reg = <0>; + spi-max-frequency = <8000000>; + spi-cs-setup-delay-ns = <2000>; + spi-cs-hold-delay-ns = <2000>; + reset-gpios = <&pinctrl_ap 170 GPIO_ACTIVE_LOW>; + interrupts-extended = <&pinctrl_ap 174 IRQ_TYPE_EDGE_FALLING>; + firmware-name = "apple/dfrmtfw-j493.bin"; + touchscreen-size-x = <23045>; + touchscreen-size-y = <640>; + touchscreen-inverted-y; + }; +}; diff --git a/arch/arm64/boot/dts/apple/t8112.dtsi b/arch/arm64/boot/dts/apple/t8112.dtsi index 58d88f1ef92a..271986a7697f 100644 --- a/arch/arm64/boot/dts/apple/t8112.dtsi +++ b/arch/arm64/boot/dts/apple/t8112.dtsi @@ -499,7 +499,7 @@ power-domains = <&ps_spi3>; #address-cells = <1>; #size-cells = <0>; - status = "disabled"; + status = "disabled"; /* only used in J493 */ }; serial0: serial@235200000 { |