summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Walleij <linus.walleij@linaro.org>2012-06-19 23:44:25 +0200
committerMike Turquette <mturquette@linaro.org>2012-07-11 15:36:45 -0700
commit50667d63085af108f625c83102430c1d74931d78 (patch)
tree62285dcaf8733ef5e9257db9ec6029ca7745c26c
parent9ca1c5a4bf4105d6f2f2a46892495953dd3e2fec (diff)
ARM: u300: convert to common clock
This converts the U300 clock implementation over to use the common struct clk and moves the implementation down into drivers/clk. Since VCO isn't used in tree it was removed, it's not hard to put it back in if need be. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [mturquette@linaro.org: trivial Makefile conflict] Signed-off-by: Mike Turquette <mturquette@linaro.org>
-rw-r--r--arch/arm/Kconfig2
-rw-r--r--arch/arm/mach-u300/Makefile2
-rw-r--r--arch/arm/mach-u300/clock.c1504
-rw-r--r--arch/arm/mach-u300/clock.h50
-rw-r--r--arch/arm/mach-u300/core.c21
-rw-r--r--arch/arm/mach-u300/timer.c2
-rw-r--r--drivers/clk/Makefile3
-rw-r--r--drivers/clk/clk-u300.c746
-rw-r--r--include/linux/platform_data/clk-u300.h1
9 files changed, 763 insertions, 1568 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a91009c61870..c59853738967 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -888,7 +888,7 @@ config ARCH_U300
select ARM_VIC
select GENERIC_CLOCKEVENTS
select CLKDEV_LOOKUP
- select HAVE_MACH_CLKDEV
+ select COMMON_CLK
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
help
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
index fd3a5c382f47..7e47d37aeb0e 100644
--- a/arch/arm/mach-u300/Makefile
+++ b/arch/arm/mach-u300/Makefile
@@ -2,7 +2,7 @@
# Makefile for the linux kernel, U300 machine.
#
-obj-y := core.o clock.o timer.o
+obj-y := core.o timer.o
obj-m :=
obj-n :=
obj- :=
diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
deleted file mode 100644
index 5535dd0a78c9..000000000000
--- a/arch/arm/mach-u300/clock.c
+++ /dev/null
@@ -1,1504 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/clock.c
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Define clocks in the app platform.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- *
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/spinlock.h>
-#include <linux/debugfs.h>
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/timer.h>
-#include <linux/io.h>
-#include <linux/seq_file.h>
-#include <linux/clkdev.h>
-
-#include <mach/hardware.h>
-#include <mach/syscon.h>
-
-#include "clock.h"
-
-/*
- * TODO:
- * - move all handling of the CCR register into this file and create
- * a spinlock for the CCR register
- * - switch to the clkdevice lookup mechanism that maps clocks to
- * device ID:s instead when it becomes available in kernel 2.6.29.
- * - implement rate get/set for all clocks that need it.
- */
-
-/*
- * Syscon clock I/O registers lock so clock requests don't collide
- * NOTE: this is a local lock only used to lock access to clock and
- * reset registers in syscon.
- */
-static DEFINE_SPINLOCK(syscon_clkreg_lock);
-static DEFINE_SPINLOCK(syscon_resetreg_lock);
-
-/*
- * The clocking hierarchy currently looks like this.
- * NOTE: the idea is NOT to show how the clocks are routed on the chip!
- * The ideas is to show dependencies, so a clock higher up in the
- * hierarchy has to be on in order for another clock to be on. Now,
- * both CPU and DMA can actually be on top of the hierarchy, and that
- * is not modeled currently. Instead we have the backbone AMBA bus on
- * top. This bus cannot be programmed in any way but conceptually it
- * needs to be active for the bridges and devices to transport data.
- *
- * Please be aware that a few clocks are hw controlled, which mean that
- * the hw itself can turn on/off or change the rate of the clock when
- * needed!
- *
- * AMBA bus
- * |
- * +- CPU
- * +- FSMC NANDIF NAND Flash interface
- * +- SEMI Shared Memory interface
- * +- ISP Image Signal Processor (U335 only)
- * +- CDS (U335 only)
- * +- DMA Direct Memory Access Controller
- * +- AAIF APP/ACC Inteface (Mobile Scalable Link, MSL)
- * +- APEX
- * +- VIDEO_ENC AVE2/3 Video Encoder
- * +- XGAM Graphics Accelerator Controller
- * +- AHB
- * |
- * +- ahb:0 AHB Bridge
- * | |
- * | +- ahb:1 INTCON Interrupt controller
- * | +- ahb:3 MSPRO Memory Stick Pro controller
- * | +- ahb:4 EMIF External Memory interface
- * |
- * +- fast:0 FAST bridge
- * | |
- * | +- fast:1 MMCSD MMC/SD card reader controller
- * | +- fast:2 I2S0 PCM I2S channel 0 controller
- * | +- fast:3 I2S1 PCM I2S channel 1 controller
- * | +- fast:4 I2C0 I2C channel 0 controller
- * | +- fast:5 I2C1 I2C channel 1 controller
- * | +- fast:6 SPI SPI controller
- * | +- fast:7 UART1 Secondary UART (U335 only)
- * |
- * +- slow:0 SLOW bridge
- * |
- * +- slow:1 SYSCON (not possible to control)
- * +- slow:2 WDOG Watchdog
- * +- slow:3 UART0 primary UART
- * +- slow:4 TIMER_APP Application timer - used in Linux
- * +- slow:5 KEYPAD controller
- * +- slow:6 GPIO controller
- * +- slow:7 RTC controller
- * +- slow:8 BT Bus Tracer (not used currently)
- * +- slow:9 EH Event Handler (not used currently)
- * +- slow:a TIMER_ACC Access style timer (not used currently)
- * +- slow:b PPM (U335 only, what is that?)
- */
-
-/*
- * Reset control functions. We remember if a block has been
- * taken out of reset and don't remove the reset assertion again
- * and vice versa. Currently we only remove resets so the
- * enablement function is defined out.
- */
-static void syscon_block_reset_enable(struct clk *clk)
-{
- u16 val;
- unsigned long iflags;
-
- /* Not all blocks support resetting */
- if (!clk->res_reg || !clk->res_mask)
- return;
- spin_lock_irqsave(&syscon_resetreg_lock, iflags);
- val = readw(clk->res_reg);
- val |= clk->res_mask;
- writew(val, clk->res_reg);
- spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
- clk->reset = true;
-}
-
-static void syscon_block_reset_disable(struct clk *clk)
-{
- u16 val;
- unsigned long iflags;
-
- /* Not all blocks support resetting */
- if (!clk->res_reg || !clk->res_mask)
- return;
- spin_lock_irqsave(&syscon_resetreg_lock, iflags);
- val = readw(clk->res_reg);
- val &= ~clk->res_mask;
- writew(val, clk->res_reg);
- spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
- clk->reset = false;
-}
-
-int __clk_get(struct clk *clk)
-{
- u16 val;
-
- /* The MMC and MSPRO clocks need some special set-up */
- if (!strcmp(clk->name, "MCLK")) {
- /* Set default MMC clock divisor to 18.9 MHz */
- writew(0x0054U, U300_SYSCON_VBASE + U300_SYSCON_MMF0R);
- val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR);
- /* Disable the MMC feedback clock */
- val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
- /* Disable MSPRO frequency */
- val &= ~U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR);
- }
- if (!strcmp(clk->name, "MSPRO")) {
- val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR);
- /* Disable the MMC feedback clock */
- val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
- /* Enable MSPRO frequency */
- val |= U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR);
- }
- return 1;
-}
-EXPORT_SYMBOL(__clk_get);
-
-void __clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(__clk_put);
-
-static void syscon_clk_disable(struct clk *clk)
-{
- unsigned long iflags;
-
- /* Don't touch the hardware controlled clocks */
- if (clk->hw_ctrld)
- return;
-
- spin_lock_irqsave(&syscon_clkreg_lock, iflags);
- writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCDR);
- spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-
-static void syscon_clk_enable(struct clk *clk)
-{
- unsigned long iflags;
-
- /* Don't touch the hardware controlled clocks */
- if (clk->hw_ctrld)
- return;
-
- spin_lock_irqsave(&syscon_clkreg_lock, iflags);
- writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCER);
- spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-
-static u16 syscon_clk_get_rate(void)
-{
- u16 val;
- unsigned long iflags;
-
- spin_lock_irqsave(&syscon_clkreg_lock, iflags);
- val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
- val &= U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
- spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
- return val;
-}
-
-#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
-static void enable_i2s0_vcxo(void)
-{
- u16 val;
- unsigned long iflags;
-
- spin_lock_irqsave(&syscon_clkreg_lock, iflags);
- /* Set I2S0 to use the VCXO 26 MHz clock */
- val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
- val |= U300_SYSCON_CCR_TURN_VCXO_ON;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
- val |= U300_SYSCON_CCR_I2S0_USE_VCXO;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
- val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
- val |= U300_SYSCON_CEFR_I2S0_CLK_EN;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
- spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-
-static void enable_i2s1_vcxo(void)
-{
- u16 val;
- unsigned long iflags;
-
- spin_lock_irqsave(&syscon_clkreg_lock, iflags);
- /* Set I2S1 to use the VCXO 26 MHz clock */
- val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
- val |= U300_SYSCON_CCR_TURN_VCXO_ON;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
- val |= U300_SYSCON_CCR_I2S1_USE_VCXO;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
- val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
- val |= U300_SYSCON_CEFR_I2S1_CLK_EN;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
- spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-
-static void disable_i2s0_vcxo(void)
-{
- u16 val;
- unsigned long iflags;
-
- spin_lock_irqsave(&syscon_clkreg_lock, iflags);
- /* Disable I2S0 use of the VCXO 26 MHz clock */
- val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
- val &= ~U300_SYSCON_CCR_I2S0_USE_VCXO;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
- /* Deactivate VCXO if no one else is using VCXO */
- if (!(val & U300_SYSCON_CCR_I2S1_USE_VCXO))
- val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
- val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
- val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
- spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-
-static void disable_i2s1_vcxo(void)
-{
- u16 val;
- unsigned long iflags;
-
- spin_lock_irqsave(&syscon_clkreg_lock, iflags);
- /* Disable I2S1 use of the VCXO 26 MHz clock */
- val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
- val &= ~U300_SYSCON_CCR_I2S1_USE_VCXO;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
- /* Deactivate VCXO if no one else is using VCXO */
- if (!(val & U300_SYSCON_CCR_I2S0_USE_VCXO))
- val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
- val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
- val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
- spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-#endif /* CONFIG_MACH_U300_USE_I2S_AS_MASTER */
-
-
-static void syscon_clk_rate_set_mclk(unsigned long rate)
-{
- u16 val;
- u32 reg;
- unsigned long iflags;
-
- switch (rate) {
- case 18900000:
- val = 0x0054;
- break;
- case 20800000:
- val = 0x0044;
- break;
- case 23100000:
- val = 0x0043;
- break;
- case 26000000:
- val = 0x0033;
- break;
- case 29700000:
- val = 0x0032;
- break;
- case 34700000:
- val = 0x0022;
- break;
- case 41600000:
- val = 0x0021;
- break;
- case 52000000:
- val = 0x0011;
- break;
- case 104000000:
- val = 0x0000;
- break;
- default:
- printk(KERN_ERR "Trying to set MCLK to unknown speed! %ld\n",
- rate);
- return;
- }
-
- spin_lock_irqsave(&syscon_clkreg_lock, iflags);
- reg = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) &
- ~U300_SYSCON_MMF0R_MASK;
- writew(reg | val, U300_SYSCON_VBASE + U300_SYSCON_MMF0R);
- spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-
-void syscon_clk_rate_set_cpuclk(unsigned long rate)
-{
- u16 val;
- unsigned long iflags;
-
- switch (rate) {
- case 13000000:
- val = U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER;
- break;
- case 52000000:
- val = U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE;
- break;
- case 104000000:
- val = U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH;
- break;
- case 208000000:
- val = U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST;
- break;
- default:
- return;
- }
- spin_lock_irqsave(&syscon_clkreg_lock, iflags);
- val |= readw(U300_SYSCON_VBASE + U300_SYSCON_CCR) &
- ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK ;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
- spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-EXPORT_SYMBOL(syscon_clk_rate_set_cpuclk);
-
-void clk_disable(struct clk *clk)
-{
- unsigned long iflags;
-
- spin_lock_irqsave(&clk->lock, iflags);
- if (clk->usecount > 0 && !(--clk->usecount)) {
- /* some blocks lack clocking registers and cannot be disabled */
- if (clk->disable)
- clk->disable(clk);
- if (likely((u32)clk->parent))
- clk_disable(clk->parent);
- }
-#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
- if (unlikely(!strcmp(clk->name, "I2S0")))
- disable_i2s0_vcxo();
- if (unlikely(!strcmp(clk->name, "I2S1")))
- disable_i2s1_vcxo();
-#endif
- spin_unlock_irqrestore(&clk->lock, iflags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-int clk_enable(struct clk *clk)
-{
- int ret = 0;
- unsigned long iflags;
-
- spin_lock_irqsave(&clk->lock, iflags);
- if (clk->usecount++ == 0) {
- if (likely((u32)clk->parent))
- ret = clk_enable(clk->parent);
-
- if (unlikely(ret != 0))
- clk->usecount--;
- else {
- /* remove reset line (we never enable reset again) */
- syscon_block_reset_disable(clk);
- /* clocks without enable function are always on */
- if (clk->enable)
- clk->enable(clk);
-#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
- if (unlikely(!strcmp(clk->name, "I2S0")))
- enable_i2s0_vcxo();
- if (unlikely(!strcmp(clk->name, "I2S1")))
- enable_i2s1_vcxo();
-#endif
- }
- }
- spin_unlock_irqrestore(&clk->lock, iflags);
- return ret;
-
-}
-EXPORT_SYMBOL(clk_enable);
-
-/* Returns the clock rate in Hz */
-static unsigned long clk_get_rate_cpuclk(struct clk *clk)
-{
- u16 val;
-
- val = syscon_clk_get_rate();
-
- switch (val) {
- case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
- case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
- return 13000000;
- case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
- return 52000000;
- case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
- return 104000000;
- case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
- return 208000000;
- default:
- break;
- }
- return clk->rate;
-}
-
-static unsigned long clk_get_rate_ahb_clk(struct clk *clk)
-{
- u16 val;
-
- val = syscon_clk_get_rate();
-
- switch (val) {
- case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
- case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
- return 6500000;
- case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
- return 26000000;
- case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
- case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
- return 52000000;
- default:
- break;
- }
- return clk->rate;
-
-}
-
-static unsigned long clk_get_rate_emif_clk(struct clk *clk)
-{
- u16 val;
-
- val = syscon_clk_get_rate();
-
- switch (val) {
- case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
- case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
- return 13000000;
- case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
- return 52000000;
- case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
- case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
- return 104000000;
- default:
- break;
- }
- return clk->rate;
-
-}
-
-static unsigned long clk_get_rate_xgamclk(struct clk *clk)
-{
- u16 val;
-
- val = syscon_clk_get_rate();
-
- switch (val) {
- case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
- case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
- return 6500000;
- case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
- return 26000000;
- case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
- case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
- return 52000000;
- default:
- break;
- }
-
- return clk->rate;
-}
-
-static unsigned long clk_get_rate_mclk(struct clk *clk)
-{
- u16 val;
-
- val = syscon_clk_get_rate();
-
- switch (val) {
- case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
- /*
- * Here, the 208 MHz PLL gets shut down and the always
- * on 13 MHz PLL used for RTC etc kicks into use
- * instead.
- */
- return 13000000;
- case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
- case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
- case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
- case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
- {
- /*
- * This clock is under program control. The register is
- * divided in two nybbles, bit 7-4 gives cycles-1 to count
- * high, bit 3-0 gives cycles-1 to count low. Distribute
- * these with no more than 1 cycle difference between
- * low and high and add low and high to get the actual
- * divisor. The base PLL is 208 MHz. Writing 0x00 will
- * divide by 1 and 1 so the highest frequency possible
- * is 104 MHz.
- *
- * e.g. 0x54 =>
- * f = 208 / ((5+1) + (4+1)) = 208 / 11 = 18.9 MHz
- */
- u16 val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) &
- U300_SYSCON_MMF0R_MASK;
- switch (val) {
- case 0x0054:
- return 18900000;
- case 0x0044:
- return 20800000;
- case 0x0043:
- return 23100000;
- case 0x0033:
- return 26000000;
- case 0x0032:
- return 29700000;
- case 0x0022:
- return 34700000;
- case 0x0021:
- return 41600000;
- case 0x0011:
- return 52000000;
- case 0x0000:
- return 104000000;
- default:
- break;
- }
- }
- default:
- break;
- }
-
- return clk->rate;
-}
-
-static unsigned long clk_get_rate_i2s_i2c_spi(struct clk *clk)
-{
- u16 val;
-
- val = syscon_clk_get_rate();
-
- switch (val) {
- case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
- case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
- return 13000000;
- case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
- case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
- case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
- return 26000000;
- default:
- break;
- }
-
- return clk->rate;
-}
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- if (clk->get_rate)
- return clk->get_rate(clk);
- else
- return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-static unsigned long clk_round_rate_mclk(struct clk *clk, unsigned long rate)
-{
- if (rate <= 18900000)
- return 18900000;
- if (rate <= 20800000)
- return 20800000;
- if (rate <= 23100000)
- return 23100000;
- if (rate <= 26000000)
- return 26000000;
- if (rate <= 29700000)
- return 29700000;
- if (rate <= 34700000)
- return 34700000;
- if (rate <= 41600000)
- return 41600000;
- if (rate <= 52000000)
- return 52000000;
- return -EINVAL;
-}
-
-static unsigned long clk_round_rate_cpuclk(struct clk *clk, unsigned long rate)
-{
- if (rate <= 13000000)
- return 13000000;
- if (rate <= 52000000)
- return 52000000;
- if (rate <= 104000000)
- return 104000000;
- if (rate <= 208000000)
- return 208000000;
- return -EINVAL;
-}
-
-/*
- * This adjusts a requested rate to the closest exact rate
- * a certain clock can provide. For a fixed clock it's
- * mostly clk->rate.
- */
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- /* TODO: get appropriate switches for EMIFCLK, AHBCLK and MCLK */
- /* Else default to fixed value */
-
- if (clk->round_rate) {
- return (long) clk->round_rate(clk, rate);
- } else {
- printk(KERN_ERR "clock: Failed to round rate of %s\n",
- clk->name);
- }
- return (long) clk->rate;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-static int clk_set_rate_mclk(struct clk *clk, unsigned long rate)
-{
- syscon_clk_rate_set_mclk(clk_round_rate(clk, rate));
- return 0;
-}
-
-static int clk_set_rate_cpuclk(struct clk *clk, unsigned long rate)
-{
- syscon_clk_rate_set_cpuclk(clk_round_rate(clk, rate));
- return 0;
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- /* TODO: set for EMIFCLK and AHBCLK */
- /* Else assume the clock is fixed and fail */
- if (clk->set_rate) {
- return clk->set_rate(clk, rate);
- } else {
- printk(KERN_ERR "clock: Failed to set %s to %ld hz\n",
- clk->name, rate);
- return -EINVAL;
- }
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-/*
- * Clock definitions. The clock parents are set to respective
- * bridge and the clock framework makes sure that the clocks have
- * parents activated and are brought out of reset when in use.
- *
- * Clocks that have hw_ctrld = true are hw controlled, and the hw
- * can by itself turn these clocks on and off.
- * So in other words, we don't really have to care about them.
- */
-
-static struct clk amba_clk = {
- .name = "AMBA",
- .rate = 52000000, /* this varies! */
- .hw_ctrld = true,
- .reset = false,
- .lock = __SPIN_LOCK_UNLOCKED(amba_clk.lock),
-};
-
-/*
- * These blocks are connected directly to the AMBA bus
- * with no bridge.
- */
-
-static struct clk cpu_clk = {
- .name = "CPU",
- .parent = &amba_clk,
- .rate = 208000000, /* this varies! */
- .hw_ctrld = true,
- .reset = true,
- .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
- .res_mask = U300_SYSCON_RRR_CPU_RESET_EN,
- .set_rate = clk_set_rate_cpuclk,
- .get_rate = clk_get_rate_cpuclk,
- .round_rate = clk_round_rate_cpuclk,
- .lock = __SPIN_LOCK_UNLOCKED(cpu_clk.lock),
-};
-
-static struct clk nandif_clk = {
- .name = "FSMC",
- .parent = &amba_clk,
- .hw_ctrld = false,
- .reset = true,
- .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
- .res_mask = U300_SYSCON_RRR_NANDIF_RESET_EN,
- .clk_val = U300_SYSCON_SBCER_NANDIF_CLK_EN,
- .enable = syscon_clk_enable,
- .disable = syscon_clk_disable,
- .lock = __SPIN_LOCK_UNLOCKED(nandif_clk.lock),
-};
-
-static struct clk semi_clk = {
- .name = "SEMI",
- .parent = &amba_clk,
- .rate = 0, /* FIXME */
- /* It is not possible to reset SEMI */
- .hw_ctrld = false,
- .reset = false,
- .clk_val = U300_SYSCON_SBCER_SEMI_CLK_EN,
- .enable = syscon_clk_enable,
- .disable = syscon_clk_disable,
- .lock = __SPIN_LOCK_UNLOCKED(semi_clk.lock),
-};
-
-#ifdef CONFIG_MACH_U300_BS335
-static struct clk isp_clk = {
- .name = "ISP",
- .parent = &amba_clk,
- .rate = 0, /* FIXME */
- .hw_ctrld = false,
- .reset = true,
- .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
- .res_mask = U300_SYSCON_RRR_ISP_RESET_EN,
- .clk_val = U300_SYSCON_SBCER_ISP_CLK_EN,
- .enable = syscon_clk_enable,
- .disable = syscon_clk_disable,
- .lock = __SPIN_LOCK_UNLOCKED(isp_clk.lock),
-};
-
-static struct clk cds_clk = {
- .name = "CDS",
- .parent = &amba_clk,
- .rate = 0, /* FIXME */
- .hw_ctrld = false,
- .reset = true,
- .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
- .res_mask = U300_SYSCON_RRR_CDS_RESET_EN,
- .clk_val = U300_SYSCON_SBCER_CDS_CLK_EN,
- .enable = syscon_clk_enable,
- .disable = syscon_clk_disable,
- .lock = __SPIN_LOCK_UNLOCKED(cds_clk.lock),
-};
-#endif
-
-static struct clk dma_clk = {
- .name = "DMA",
- .parent = &amba_clk,
- .rate = 52000000, /* this varies! */
- .hw_ctrld = true,
- .reset = true,
- .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
- .res_mask = U300_SYSCON_RRR_DMAC_RESET_EN,
- .clk_val = U300_SYSCON_SBCER_DMAC_CLK_EN,
- .enable = syscon_clk_enable,
- .disable = syscon_clk_disable,
- .lock = __SPIN_LOCK_UNLOCKED(dma_clk.lock),
-};
-
-static struct clk aaif_clk = {
- .name = "AAIF",
- .parent = &amba_clk,
- .rate = 52000000, /* this varies! */
- .hw_ctrld = true,
- .reset = true,
- .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
- .res_mask = U300_SYSCON_RRR_AAIF_RESET_EN,
- .clk_val = U300_SYSCON_SBCER_AAIF_CLK_EN,
- .enable = syscon_clk_enable,
- .disable = syscon_clk_disable,
- .lock = __SPIN_LOCK_UNLOCKED(aaif_clk.lock),
-};
-
-static struct clk apex_clk = {
- .name = "APEX",
- .parent = &amba_clk,
- .rate = 0, /* FIXME */
- .hw_ctrld = true,
- .reset = true,
- .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
- .res_mask = U300_SYSCON_RRR_APEX_RESET_EN,
- .clk_val = U300_SYSCON_SBCER_APEX_CLK_EN,
- .enable = syscon_clk_enable,
- .disable = syscon_clk_disable,
- .lock = __SPIN_LOCK_UNLOCKED(apex_clk.lock),
-};
-
-static struct clk video_enc_clk = {
- .name = "VIDEO_ENC",
- .parent = &amba_clk,
- .rate = 208000000, /* this varies! */
- .hw_ctrld = false,
- .reset = false,
- .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
- /* This has XGAM in the name but refers to the video encoder */
- .res_mask = U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN,
- .clk_val = U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN,
- .enable = syscon_clk_enable,
- .disable = syscon_clk_disable,
- .lock = __SPIN_LOCK_UNLOCKED(video_enc_clk.lock),
-};
-
-static struct clk xgam_clk = {
- .name = "XGAMCLK",
- .parent = &amba_clk,
- .rate = 52000000, /* this varies! */
- .hw_ctrld = false,
- .reset = true,
- .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
- .res_mask = U300_SYSCON_RRR_XGAM_RESET_EN,
- .clk_val = U300_SYSCON_SBCER_XGAM_CLK_EN,
- .get_rate = clk_get_rate_xgamclk,
- .enable = syscon_clk_enable,
- .disable = syscon_clk_disable,
- .lock = __SPIN_LOCK_UNLOCKED(xgam_clk.lock),
-};
-
-/* This clock is used to activate the video encoder */
-static struct clk ahb_clk = {
- .name = "AHB",
- .parent = &amba_clk,
- .rate = 52000000, /* this varies! */
- .hw_ctrld = false, /* This one is set to false due to HW bug */
- .reset = true,
- .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
- .res_mask = U300_SYSCON_RRR_AHB_RESET_EN,
- .clk_val = U300_SYSCON_SBCER_AHB_CLK_EN,
- .enable = syscon_clk_enable,
- .disable = syscon_clk_disable,
- .get_rate = clk_get_rate_ahb_clk,
- .lock = __SPIN_LOCK_UNLOCKED(ahb_clk.lock),
-};
-
-
-/*
- * Clocks on the AHB bridge
- */
-
-static struct clk ahb_subsys_clk = {
- .name = "AHB_SUBSYS",
- .parent = &amba_clk,
- .rate = 52000000, /* this varies! */
- .hw_ctrld = true,
- .reset = false,
- .clk_val = U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN,
- .enable = syscon_clk_enable,
- .disable = syscon_clk_disable,
- .get_rate = clk_get_rate_ahb_clk,
- .lock = __SPIN_LOCK_UNLOCKED(ahb_subsys_clk.lock),
-};
-
-static struct clk intcon_clk = {
- .name = "INTCON",
- .parent = &ahb_subsys_clk,
- .rate = 52000000, /* this varies! */
- .hw_ctrld = false,
- .reset = true,
- .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
- .res_mask = U300_SYSCON_RRR_INTCON_RESET_EN,
- /* INTCON can be reset but not clock-gated */
- .lock = __SPIN_LOCK_UNLOCKED(intcon_clk.lock),
-
-};
-
-static struct clk mspro_clk = {
- .name = "MSPRO",
- .parent = &ahb_subsys_clk,
- .rate = 0, /* FIXME */
- .hw_ctrld = false,
- .reset = true,
- .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
- .res_mask = U300_SYSCON_RRR_MSPRO_RESET_EN,
- .clk_val = U300_SYSCON_SBCER_MSPRO_CLK_EN,
- .enable = syscon_clk_enable,
- .disable = syscon_clk_disable,
- .lock = __SPIN_LOCK_UNLOCKED(mspro_clk.lock),
-};
-
-static struct clk emif_clk = {
- .name = "EMIF",
- .parent = &ahb_subsys_clk,
- .rate = 104000000, /* this varies! */
- .hw_ctrld = false,
- .reset = true,
- .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
- .res_mask = U300_SYSCON_RRR_EMIF_RESET_EN,
- .clk_val = U300_SYSCON_SBCER_EMIF_CLK_EN,
- .enable = syscon_clk_enable,
- .disable = syscon_clk_disable,
- .get_rate = clk_get_rate_emif_clk,
- .lock = __SPIN_LOCK_UNLOCKED(emif_clk.lock),
-};
-
-
-/*
- * Clocks on the FAST bridge
- */
-static struct clk fast_clk = {
- .name = "FAST_BRIDGE",
- .parent = &amba_clk,
- .rate = 13000000, /* this varies! */
- .hw_ctrld = true,
- .reset = true,
- .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR,
- .res_mask = U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE,
- .clk_val = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN,
- .enable = syscon_clk_enable,
- .disable = syscon_clk_disable,
- .lock = __SPIN_LOCK_UNLOCKED(fast_clk.lock),
-};
-
-/*
- * The MMCI apb_pclk is hardwired to the same terminal as the
- * external MCI clock. Thus this will be referenced twice.
- */
-static struct clk mmcsd_clk = {
- .name = "MCLK",
- .parent = &fast_clk,
- .rate = 18900000, /* this varies! */
- .hw_ctrld = false,
- .reset = true,
- .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR,
- .res_mask = U300_SYSCON_RFR_MMC_RESET_ENABLE,
- .clk_val = U300_SYSCON_SBCER_MMC_CLK_EN,
- .get_rate = clk_get_rate_mclk,
- .set_rate = clk_set_rate_mclk,
- .round_rate = clk_round_rate_mclk,
- .disable = syscon_clk_disable,
- .enable = syscon_clk_enable,
- .lock = __SPIN_LOCK_UNLOCKED(mmcsd_clk.lock),
-};
-
-static struct clk i2s0_clk = {
- .name = "i2s0",
- .parent = &fast_clk,
- .rate = 26000000, /* this varies! */
- .hw_ctrld = true,
- .reset = true,
- .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR,
- .res_mask = U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE,
- .clk_val = U300_SYSCON_SBCER_I2S0_CORE_CLK_EN,
- .enable = syscon_clk_enable,
- .disable = syscon_clk_disable,
- .get_rate = clk_get_rate_i2s_i2c_spi,
- .lock = __SPIN_LOCK_UNLOCKED(i2s0_clk.lock),
-};
-
-static struct clk i2s1_clk = {
- .name = "i2s1",
- .parent = &fast_clk,
- .rate = 26000000, /* this varies! */
- .hw_ctrld = true,
- .reset = true,
- .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR,
- .res_mask = U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE,
- .clk_val = U300_SYSCON_SBCER_I2S1_CORE_CLK_EN,
- .enable = syscon_clk_enable,
- .disable = syscon_clk_disable,
- .get_rate = clk_get_rate_i2s_i2c_spi,
- .lock = __SPIN_LOCK_UNLOCKED(i2s1_clk.lock),
-};
-
-static struct clk i2c0_clk = {
- .name = "I2C0",
- .parent = &fast_clk,
- .rate = 26000000, /* this varies! */
- .hw_ctrld = false,
- .reset = true,
- .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR,
- .res_mask = U300_SYSCON_RFR_I2C0_RESET_ENABLE,
- .clk_val = U300_SYSCON_SBCER_I2C0_CLK_EN,
- .enable = syscon_clk_enable,
- .disable = syscon_clk_disable,
- .get_rate = clk_get_rate_i2s_i2c_spi,
- .lock = __SPIN_LOCK_UNLOCKED(i2c0_clk.lock),
-};
-
-static struct clk i2c1_clk = {
- .name = "I2C1",
- .parent = &fast_clk,
- .rate = 26000000, /* this varies! */
- .hw_ctrld = false,
- .reset = true,
- .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR,
- .res_mask = U300_SYSCON_RFR_I2C1_RESET_ENABLE,
- .clk_val = U300_SYSCON_SBCER_I2C1_CLK_EN,
- .enable = syscon_clk_enable,
- .disable = syscon_clk_disable,
- .get_rate = clk_get_rate_i2s_i2c_spi,
- .lock = __SPIN_LOCK_UNLOCKED(i2c1_clk.lock),
-};
-
-/*
- * The SPI apb_pclk is hardwired to the same terminal as the
- * external SPI clock. Thus this will be referenced twice.
- */
-static struct clk spi_clk = {
- .name = "SPI",
- .parent = &fast_clk,
- .rate = 26000000, /* this varies! */
- .hw_ctrld = false,
- .reset = true,
- .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR,
- .res_mask = U300_SYSCON_RFR_SPI_RESET_ENABLE,
- .clk_val = U300_SYSCON_SBCER_SPI_CLK_EN,
- .enable = syscon_clk_enable,
- .disable = syscon_clk_disable,
- .get_rate = clk_get_rate_i2s_i2c_spi,
- .lock = __SPIN_LOCK_UNLOCKED(spi_clk.lock),
-};
-
-#ifdef CONFIG_MACH_U300_BS335
-static struct clk uart1_pclk = {
- .name = "UART1_PCLK",
- .parent = &fast_clk,
- .hw_ctrld = false,
- .reset = true,
- .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR,
- .res_mask = U300_SYSCON_RFR_UART1_RESET_ENABLE,
- .clk_val = U300_SYSCON_SBCER_UART1_CLK_EN,
- .enable = syscon_clk_enable,
- .disable = syscon_clk_disable,
- .lock = __SPIN_LOCK_UNLOCKED(uart1_pclk.lock),
-};
-
-/* This one is hardwired to PLL13 */
-static struct clk uart1_clk = {
- .name = "UART1_CLK",
- .rate = 13000000,
- .hw_ctrld = true,
- .lock = __SPIN_LOCK_UNLOCKED(uart1_clk.lock),
-};
-#endif
-
-
-/*
- * Clocks on the SLOW bridge
- */
-static struct clk slow_clk = {
- .name = "SLOW_BRIDGE",
- .parent = &amba_clk,
- .rate = 13000000,
- .hw_ctrld = true,
- .reset = true,
- .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
- .res_mask = U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN,
- .clk_val = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN,
- .enable = syscon_clk_enable,
- .disable = syscon_clk_disable,
- .lock = __SPIN_LOCK_UNLOCKED(slow_clk.lock),
-};
-
-/* TODO: implement SYSCON clock? */
-
-static struct clk wdog_clk = {
- .name = "WDOG",
- .parent = &slow_clk,
- .hw_ctrld = false,
- .rate = 32768,
- .reset = false,
- /* This is always on, cannot be enabled/disabled or reset */
- .lock = __SPIN_LOCK_UNLOCKED(wdog_clk.lock),
-};
-
-static struct clk uart0_pclk = {
- .name = "UART0_PCLK",
- .parent = &slow_clk,
- .hw_ctrld = false,
- .reset = true,
- .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
- .res_mask = U300_SYSCON_RSR_UART_RESET_EN,
- .clk_val = U300_SYSCON_SBCER_UART_CLK_EN,
- .enable = syscon_clk_enable,
- .disable = syscon_clk_disable,
- .lock = __SPIN_LOCK_UNLOCKED(uart0_pclk.lock),
-};
-
-/* This one is hardwired to PLL13 */
-static struct clk uart0_clk = {
- .name = "UART0_CLK",
- .parent = &slow_clk,
- .rate = 13000000,
- .hw_ctrld = true,
- .lock = __SPIN_LOCK_UNLOCKED(uart0_clk.lock),
-};
-
-static struct clk keypad_clk = {
- .name = "KEYPAD",
- .parent = &slow_clk,
- .rate = 32768,
- .hw_ctrld = false,
- .reset = true,
- .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
- .res_mask = U300_SYSCON_RSR_KEYPAD_RESET_EN,
- .clk_val = U300_SYSCON_SBCER_KEYPAD_CLK_EN,
- .enable = syscon_clk_enable,
- .disable = syscon_clk_disable,
- .lock = __SPIN_LOCK_UNLOCKED(keypad_clk.lock),
-};
-
-static struct clk gpio_clk = {
- .name = "GPIO",
- .parent = &slow_clk,
- .rate = 13000000,
- .hw_ctrld = true,
- .reset = true,
- .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
- .res_mask = U300_SYSCON_RSR_GPIO_RESET_EN,
- .clk_val = U300_SYSCON_SBCER_GPIO_CLK_EN,
- .enable = syscon_clk_enable,
- .disable = syscon_clk_disable,
- .lock = __SPIN_LOCK_UNLOCKED(gpio_clk.lock),
-};
-
-static struct clk rtc_clk = {
- .name = "RTC",
- .parent = &slow_clk,
- .rate = 32768,
- .hw_ctrld = true,
- .reset = true,
- .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
- .res_mask = U300_SYSCON_RSR_RTC_RESET_EN,
- /* This clock is always on, cannot be enabled/disabled */
- .lock = __SPIN_LOCK_UNLOCKED(rtc_clk.lock),
-};
-
-static struct clk bustr_clk = {
- .name = "BUSTR",
- .parent = &slow_clk,
- .rate = 13000000,
- .hw_ctrld = true,
- .reset = true,
- .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
- .res_mask = U300_SYSCON_RSR_BTR_RESET_EN,
- .clk_val = U300_SYSCON_SBCER_BTR_CLK_EN,
- .enable = syscon_clk_enable,
- .disable = syscon_clk_disable,
- .lock = __SPIN_LOCK_UNLOCKED(bustr_clk.lock),
-};
-
-static struct clk evhist_clk = {
- .name = "EVHIST",
- .parent = &slow_clk,
- .rate = 13000000,
- .hw_ctrld = true,
- .reset = true,
- .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
- .res_mask = U300_SYSCON_RSR_EH_RESET_EN,
- .clk_val = U300_SYSCON_SBCER_EH_CLK_EN,
- .enable = syscon_clk_enable,
- .disable = syscon_clk_disable,
- .lock = __SPIN_LOCK_UNLOCKED(evhist_clk.lock),
-};
-
-static struct clk timer_clk = {
- .name = "TIMER",
- .parent = &slow_clk,
- .rate = 13000000,
- .hw_ctrld = true,
- .reset = true,
- .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
- .res_mask = U300_SYSCON_RSR_ACC_TMR_RESET_EN,
- .clk_val = U300_SYSCON_SBCER_ACC_TMR_CLK_EN,
- .enable = syscon_clk_enable,
- .disable = syscon_clk_disable,
- .lock = __SPIN_LOCK_UNLOCKED(timer_clk.lock),
-};
-
-/*
- * There is a binary divider in the hardware that divides
- * the 13MHz PLL by 13 down to 1 MHz.
- */
-static struct clk app_timer_clk = {
- .name = "TIMER_APP",
- .parent = &slow_clk,
- .rate = 1000000,
- .hw_ctrld = true,
- .reset = true,
- .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
- .res_mask = U300_SYSCON_RSR_APP_TMR_RESET_EN,
- .clk_val = U300_SYSCON_SBCER_APP_TMR_CLK_EN,
- .enable = syscon_clk_enable,
- .disable = syscon_clk_disable,
- .lock = __SPIN_LOCK_UNLOCKED(app_timer_clk.lock),
-};
-
-#ifdef CONFIG_MACH_U300_BS335
-static struct clk ppm_clk = {
- .name = "PPM",
- .parent = &slow_clk,
- .rate = 0, /* FIXME */
- .hw_ctrld = true, /* TODO: Look up if it is hw ctrld or not */
- .reset = true,
- .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
- .res_mask = U300_SYSCON_RSR_PPM_RESET_EN,
- .clk_val = U300_SYSCON_SBCER_PPM_CLK_EN,
- .enable = syscon_clk_enable,
- .disable = syscon_clk_disable,
- .lock = __SPIN_LOCK_UNLOCKED(ppm_clk.lock),
-};
-#endif
-
-#define DEF_LOOKUP(devid, clkref) \
- { \
- .dev_id = devid, \
- .clk = clkref, \
- }
-
-#define DEF_LOOKUP_CON(devid, conid, clkref) \
- { \
- .dev_id = devid, \
- .con_id = conid, \
- .clk = clkref, \
- }
-
-/*
- * Here we only define clocks that are meaningful to
- * look up through clockdevice.
- */
-static struct clk_lookup lookups[] = {
- /* Connected directly to the AMBA bus */
- DEF_LOOKUP("amba", &amba_clk),
- DEF_LOOKUP("cpu", &cpu_clk),
- DEF_LOOKUP("fsmc-nand", &nandif_clk),
- DEF_LOOKUP("semi", &semi_clk),
-#ifdef CONFIG_MACH_U300_BS335
- DEF_LOOKUP("isp", &isp_clk),
- DEF_LOOKUP("cds", &cds_clk),
-#endif
- DEF_LOOKUP("dma", &dma_clk),
- DEF_LOOKUP("msl", &aaif_clk),
- DEF_LOOKUP("apex", &apex_clk),
- DEF_LOOKUP("video_enc", &video_enc_clk),
- DEF_LOOKUP("xgam", &xgam_clk),
- DEF_LOOKUP("ahb", &ahb_clk),
- /* AHB bridge clocks */
- DEF_LOOKUP("ahb_subsys", &ahb_subsys_clk),
- DEF_LOOKUP("intcon", &intcon_clk),
- DEF_LOOKUP_CON("intcon", "apb_pclk", &intcon_clk),
- DEF_LOOKUP("mspro", &mspro_clk),
- DEF_LOOKUP("pl172", &emif_clk),
- DEF_LOOKUP_CON("pl172", "apb_pclk", &emif_clk),
- /* FAST bridge clocks */
- DEF_LOOKUP("fast", &fast_clk),
- DEF_LOOKUP("mmci", &mmcsd_clk),
- DEF_LOOKUP_CON("mmci", "apb_pclk", &mmcsd_clk),
- /*
- * The .0 and .1 identifiers on these comes from the platform device
- * .id field and are assigned when the platform devices are registered.
- */
- DEF_LOOKUP("i2s.0", &i2s0_clk),
- DEF_LOOKUP("i2s.1", &i2s1_clk),
- DEF_LOOKUP("stu300.0", &i2c0_clk),
- DEF_LOOKUP("stu300.1", &i2c1_clk),
- DEF_LOOKUP("pl022", &spi_clk),
- DEF_LOOKUP_CON("pl022", "apb_pclk", &spi_clk),
-#ifdef CONFIG_MACH_U300_BS335
- DEF_LOOKUP("uart1", &uart1_clk),
- DEF_LOOKUP_CON("uart1", "apb_pclk", &uart1_pclk),
-#endif
- /* SLOW bridge clocks */
- DEF_LOOKUP("slow", &slow_clk),
- DEF_LOOKUP("coh901327_wdog", &wdog_clk),
- DEF_LOOKUP("uart0", &uart0_clk),
- DEF_LOOKUP_CON("uart0", "apb_pclk", &uart0_pclk),
- DEF_LOOKUP("apptimer", &app_timer_clk),
- DEF_LOOKUP("coh901461-keypad", &keypad_clk),
- DEF_LOOKUP("u300-gpio", &gpio_clk),
- DEF_LOOKUP("rtc-coh901331", &rtc_clk),
- DEF_LOOKUP("bustr", &bustr_clk),
- DEF_LOOKUP("evhist", &evhist_clk),
- DEF_LOOKUP("timer", &timer_clk),
-#ifdef CONFIG_MACH_U300_BS335
- DEF_LOOKUP("ppm", &ppm_clk),
-#endif
-};
-
-static void __init clk_register(void)
-{
- /* Register the lookups */
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-}
-
-#if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG))
-/*
- * The following makes it possible to view the status (especially
- * reference count and reset status) for the clocks in the platform
- * by looking into the special file <debugfs>/u300_clocks
- */
-
-/* A list of all clocks in the platform */
-static struct clk *clks[] = {
- /* Top node clock for the AMBA bus */
- &amba_clk,
- /* Connected directly to the AMBA bus */
- &cpu_clk,
- &nandif_clk,
- &semi_clk,
-#ifdef CONFIG_MACH_U300_BS335
- &isp_clk,
- &cds_clk,
-#endif
- &dma_clk,
- &aaif_clk,
- &apex_clk,
- &video_enc_clk,
- &xgam_clk,
- &ahb_clk,
-
- /* AHB bridge clocks */
- &ahb_subsys_clk,
- &intcon_clk,
- &mspro_clk,
- &emif_clk,
- /* FAST bridge clocks */
- &fast_clk,
- &mmcsd_clk,
- &i2s0_clk,
- &i2s1_clk,
- &i2c0_clk,
- &i2c1_clk,
- &spi_clk,
-#ifdef CONFIG_MACH_U300_BS335
- &uart1_clk,
- &uart1_pclk,
-#endif
- /* SLOW bridge clocks */
- &slow_clk,
- &wdog_clk,
- &uart0_clk,
- &uart0_pclk,
- &app_timer_clk,
- &keypad_clk,
- &gpio_clk,
- &rtc_clk,
- &bustr_clk,
- &evhist_clk,
- &timer_clk,
-#ifdef CONFIG_MACH_U300_BS335
- &ppm_clk,
-#endif
-};
-
-static int u300_clocks_show(struct seq_file *s, void *data)
-{
- struct clk *clk;
- int i;
-
- seq_printf(s, "CLOCK DEVICE RESET STATE\t" \
- "ACTIVE\tUSERS\tHW CTRL FREQ\n");
- seq_printf(s, "---------------------------------------------" \
- "-----------------------------------------\n");
- for (i = 0; i < ARRAY_SIZE(clks); i++) {
- clk = clks[i];
- if (clk != ERR_PTR(-ENOENT)) {
- /* Format clock and device name nicely */
- char cdp[33];
- int chars;
-
- chars = snprintf(&cdp[0], 17, "%s", clk->name);
- while (chars < 16) {
- cdp[chars] = ' ';
- chars++;
- }
- chars = snprintf(&cdp[16], 17, "%s", clk->dev ?
- dev_name(clk->dev) : "N/A");
- while (chars < 16) {
- cdp[chars+16] = ' ';
- chars++;
- }
- cdp[32] = '\0';
- if (clk->get_rate || clk->rate != 0)
- seq_printf(s,
- "%s%s\t%s\t%d\t%s\t%lu Hz\n",
- &cdp[0],
- clk->reset ?
- "ASSERTED" : "RELEASED",
- clk->usecount ? "ON" : "OFF",
- clk->usecount,
- clk->hw_ctrld ? "YES" : "NO ",
- clk_get_rate(clk));
- else
- seq_printf(s,
- "%s%s\t%s\t%d\t%s\t" \
- "(unknown rate)\n",
- &cdp[0],
- clk->reset ?
- "ASSERTED" : "RELEASED",
- clk->usecount ? "ON" : "OFF",
- clk->usecount,
- clk->hw_ctrld ? "YES" : "NO ");
- }
- }
- return 0;
-}
-
-static int u300_clocks_open(struct inode *inode, struct file *file)
-{
- return single_open(file, u300_clocks_show, NULL);
-}
-
-static const struct file_operations u300_clocks_operations = {
- .open = u300_clocks_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int __init init_clk_read_debugfs(void)
-{
- /* Expose a simple debugfs interface to view all clocks */
- (void) debugfs_create_file("u300_clocks", S_IFREG | S_IRUGO,
- NULL, NULL,
- &u300_clocks_operations);
- return 0;
-}
-/*
- * This needs to come in after the core_initcall() for the
- * overall clocks, because debugfs is not available until
- * the subsystems come up.
- */
-module_init(init_clk_read_debugfs);
-#endif
-
-int __init u300_clock_init(void)
-{
- u16 val;
-
- /*
- * FIXME: shall all this powermanagement stuff really live here???
- */
-
- /* Set system to run at PLL208, max performance, a known state. */
- val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
- val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
- /* Wait for the PLL208 to lock if not locked in yet */
- while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
- U300_SYSCON_CSR_PLL208_LOCK_IND));
-
- /* Power management enable */
- val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR);
- val |= U300_SYSCON_PMCR_PWR_MGNT_ENABLE;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR);
-
- clk_register();
-
- /*
- * Some of these may be on when we boot the system so make sure they
- * are turned OFF.
- */
- syscon_block_reset_enable(&timer_clk);
- timer_clk.disable(&timer_clk);
-
- /*
- * These shall be turned on by default when we boot the system
- * so make sure they are ON. (Adding CPU here is a bit too much.)
- * These clocks will be claimed by drivers later.
- */
- syscon_block_reset_disable(&semi_clk);
- syscon_block_reset_disable(&emif_clk);
- clk_enable(&semi_clk);
- clk_enable(&emif_clk);
-
- return 0;
-}
diff --git a/arch/arm/mach-u300/clock.h b/arch/arm/mach-u300/clock.h
deleted file mode 100644
index 4f50ca8f901e..000000000000
--- a/arch/arm/mach-u300/clock.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * arch/arm/mach-u300/include/mach/clock.h
- *
- * Copyright (C) 2004 - 2005 Nokia corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * Adopted to ST-Ericsson U300 platforms by
- * Jonas Aaberg <jonas.aberg@stericsson.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __MACH_CLOCK_H
-#define __MACH_CLOCK_H
-
-#include <linux/clk.h>
-
-struct clk {
- struct list_head node;
- struct module *owner;
- struct device *dev;
- const char *name;
- struct clk *parent;
-
- spinlock_t lock;
- unsigned long rate;
- bool reset;
- __u16 clk_val;
- __s8 usecount;
- void __iomem * res_reg;
- __u16 res_mask;
-
- bool hw_ctrld;
-
- void (*recalc) (struct clk *);
- int (*set_rate) (struct clk *, unsigned long);
- unsigned long (*get_rate) (struct clk *);
- unsigned long (*round_rate) (struct clk *, unsigned long);
- void (*init) (struct clk *);
- void (*enable) (struct clk *);
- void (*disable) (struct clk *);
-};
-
-int u300_clock_init(void);
-
-#endif
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 33339745d432..03acf1883ec7 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -30,6 +30,7 @@
#include <linux/pinctrl/consumer.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/dma-mapping.h>
+#include <linux/platform_data/clk-u300.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -44,7 +45,6 @@
#include <mach/dma_channels.h>
#include <mach/gpio-u300.h>
-#include "clock.h"
#include "spi.h"
#include "i2c.h"
#include "u300-gpio.h"
@@ -1658,12 +1658,20 @@ void __init u300_init_irq(void)
int i;
/* initialize clocking early, we want to clock the INTCON */
- u300_clock_init();
+ u300_clk_init(U300_SYSCON_VBASE);
+
+ /* Bootstrap EMIF and SEMI clocks */
+ clk = clk_get_sys("pl172", NULL);
+ BUG_ON(IS_ERR(clk));
+ clk_prepare_enable(clk);
+ clk = clk_get_sys("semi", NULL);
+ BUG_ON(IS_ERR(clk));
+ clk_prepare_enable(clk);
/* Clock the interrupt controller */
clk = clk_get_sys("intcon", NULL);
BUG_ON(IS_ERR(clk));
- clk_enable(clk);
+ clk_prepare_enable(clk);
for (i = 0; i < U300_VIC_IRQS_END; i++)
set_bit(i, (unsigned long *) &mask[0]);
@@ -1811,13 +1819,6 @@ void __init u300_init_devices(void)
/* Check what platform we run and print some status information */
u300_init_check_chip();
- /* Set system to run at PLL208, max performance, a known state. */
- val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
- val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
- /* Wait for the PLL208 to lock if not locked in yet */
- while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
- U300_SYSCON_CSR_PLL208_LOCK_IND));
/* Initialize SPI device with some board specifics */
u300_spi_init(&pl022_device);
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index bc1c7897e82d..56ac06d38ec1 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -354,7 +354,7 @@ static void __init u300_timer_init(void)
/* Clock the interrupt controller */
clk = clk_get_sys("apptimer", NULL);
BUG_ON(IS_ERR(clk));
- clk_enable(clk);
+ clk_prepare_enable(clk);
rate = clk_get_rate(clk);
setup_sched_clock(u300_read_sched_clock, 32, rate);
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index b679f117f3cc..35d9fb44c814 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -1,10 +1,11 @@
-
+# common clock types
obj-$(CONFIG_CLKDEV_LOOKUP) += clkdev.o
obj-$(CONFIG_COMMON_CLK) += clk.o clk-fixed-rate.o clk-gate.o \
clk-mux.o clk-divider.o clk-fixed-factor.o
# SoCs specific
obj-$(CONFIG_ARCH_MXS) += mxs/
obj-$(CONFIG_PLAT_SPEAR) += spear/
+obj-$(CONFIG_ARCH_U300) += clk-u300.o
# Chip specific
obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
diff --git a/drivers/clk/clk-u300.c b/drivers/clk/clk-u300.c
new file mode 100644
index 000000000000..a15f7928fb11
--- /dev/null
+++ b/drivers/clk/clk-u300.c
@@ -0,0 +1,746 @@
+/*
+ * U300 clock implementation
+ * Copyright (C) 2007-2012 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ */
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk-provider.h>
+#include <linux/spinlock.h>
+#include <mach/syscon.h>
+
+/*
+ * The clocking hierarchy currently looks like this.
+ * NOTE: the idea is NOT to show how the clocks are routed on the chip!
+ * The ideas is to show dependencies, so a clock higher up in the
+ * hierarchy has to be on in order for another clock to be on. Now,
+ * both CPU and DMA can actually be on top of the hierarchy, and that
+ * is not modeled currently. Instead we have the backbone AMBA bus on
+ * top. This bus cannot be programmed in any way but conceptually it
+ * needs to be active for the bridges and devices to transport data.
+ *
+ * Please be aware that a few clocks are hw controlled, which mean that
+ * the hw itself can turn on/off or change the rate of the clock when
+ * needed!
+ *
+ * AMBA bus
+ * |
+ * +- CPU
+ * +- FSMC NANDIF NAND Flash interface
+ * +- SEMI Shared Memory interface
+ * +- ISP Image Signal Processor (U335 only)
+ * +- CDS (U335 only)
+ * +- DMA Direct Memory Access Controller
+ * +- AAIF APP/ACC Inteface (Mobile Scalable Link, MSL)
+ * +- APEX
+ * +- VIDEO_ENC AVE2/3 Video Encoder
+ * +- XGAM Graphics Accelerator Controller
+ * +- AHB
+ * |
+ * +- ahb:0 AHB Bridge
+ * | |
+ * | +- ahb:1 INTCON Interrupt controller
+ * | +- ahb:3 MSPRO Memory Stick Pro controller
+ * | +- ahb:4 EMIF External Memory interface
+ * |
+ * +- fast:0 FAST bridge
+ * | |
+ * | +- fast:1 MMCSD MMC/SD card reader controller
+ * | +- fast:2 I2S0 PCM I2S channel 0 controller
+ * | +- fast:3 I2S1 PCM I2S channel 1 controller
+ * | +- fast:4 I2C0 I2C channel 0 controller
+ * | +- fast:5 I2C1 I2C channel 1 controller
+ * | +- fast:6 SPI SPI controller
+ * | +- fast:7 UART1 Secondary UART (U335 only)
+ * |
+ * +- slow:0 SLOW bridge
+ * |
+ * +- slow:1 SYSCON (not possible to control)
+ * +- slow:2 WDOG Watchdog
+ * +- slow:3 UART0 primary UART
+ * +- slow:4 TIMER_APP Application timer - used in Linux
+ * +- slow:5 KEYPAD controller
+ * +- slow:6 GPIO controller
+ * +- slow:7 RTC controller
+ * +- slow:8 BT Bus Tracer (not used currently)
+ * +- slow:9 EH Event Handler (not used currently)
+ * +- slow:a TIMER_ACC Access style timer (not used currently)
+ * +- slow:b PPM (U335 only, what is that?)
+ */
+
+/* Global syscon virtual base */
+static void __iomem *syscon_vbase;
+
+/**
+ * struct clk_syscon - U300 syscon clock
+ * @hw: corresponding clock hardware entry
+ * @hw_ctrld: whether this clock is hardware controlled (for refcount etc)
+ * and does not need any magic pokes to be enabled/disabled
+ * @reset: state holder, whether this block's reset line is asserted or not
+ * @res_reg: reset line enable/disable flag register
+ * @res_bit: bit for resetting or taking this consumer out of reset
+ * @en_reg: clock line enable/disable flag register
+ * @en_bit: bit for enabling/disabling this consumer clock line
+ * @clk_val: magic value to poke in the register to enable/disable
+ * this one clock
+ */
+struct clk_syscon {
+ struct clk_hw hw;
+ bool hw_ctrld;
+ bool reset;
+ void __iomem *res_reg;
+ u8 res_bit;
+ void __iomem *en_reg;
+ u8 en_bit;
+ u16 clk_val;
+};
+
+#define to_syscon(_hw) container_of(_hw, struct clk_syscon, hw)
+
+static DEFINE_SPINLOCK(syscon_resetreg_lock);
+
+/*
+ * Reset control functions. We remember if a block has been
+ * taken out of reset and don't remove the reset assertion again
+ * and vice versa. Currently we only remove resets so the
+ * enablement function is defined out.
+ */
+static void syscon_block_reset_enable(struct clk_syscon *sclk)
+{
+ unsigned long iflags;
+ u16 val;
+
+ /* Not all blocks support resetting */
+ if (!sclk->res_reg)
+ return;
+ spin_lock_irqsave(&syscon_resetreg_lock, iflags);
+ val = readw(sclk->res_reg);
+ val |= BIT(sclk->res_bit);
+ writew(val, sclk->res_reg);
+ spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
+ sclk->reset = true;
+}
+
+static void syscon_block_reset_disable(struct clk_syscon *sclk)
+{
+ unsigned long iflags;
+ u16 val;
+
+ /* Not all blocks support resetting */
+ if (!sclk->res_reg)
+ return;
+ spin_lock_irqsave(&syscon_resetreg_lock, iflags);
+ val = readw(sclk->res_reg);
+ val &= ~BIT(sclk->res_bit);
+ writew(val, sclk->res_reg);
+ spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
+ sclk->reset = false;
+}
+
+static int syscon_clk_prepare(struct clk_hw *hw)
+{
+ struct clk_syscon *sclk = to_syscon(hw);
+
+ /* If the block is in reset, bring it out */
+ if (sclk->reset)
+ syscon_block_reset_disable(sclk);
+ return 0;
+}
+
+static void syscon_clk_unprepare(struct clk_hw *hw)
+{
+ struct clk_syscon *sclk = to_syscon(hw);
+
+ /* Please don't force the console into reset */
+ if (sclk->clk_val == U300_SYSCON_SBCER_UART_CLK_EN)
+ return;
+ /* When unpreparing, force block into reset */
+ if (!sclk->reset)
+ syscon_block_reset_enable(sclk);
+}
+
+static int syscon_clk_enable(struct clk_hw *hw)
+{
+ struct clk_syscon *sclk = to_syscon(hw);
+
+ /* Don't touch the hardware controlled clocks */
+ if (sclk->hw_ctrld)
+ return 0;
+ /* These cannot be controlled */
+ if (sclk->clk_val == 0xFFFFU)
+ return 0;
+
+ writew(sclk->clk_val, syscon_vbase + U300_SYSCON_SBCER);
+ return 0;
+}
+
+static void syscon_clk_disable(struct clk_hw *hw)
+{
+ struct clk_syscon *sclk = to_syscon(hw);
+
+ /* Don't touch the hardware controlled clocks */
+ if (sclk->hw_ctrld)
+ return;
+ if (sclk->clk_val == 0xFFFFU)
+ return;
+ /* Please don't disable the console port */
+ if (sclk->clk_val == U300_SYSCON_SBCER_UART_CLK_EN)
+ return;
+
+ writew(sclk->clk_val, syscon_vbase + U300_SYSCON_SBCDR);
+}
+
+static int syscon_clk_is_enabled(struct clk_hw *hw)
+{
+ struct clk_syscon *sclk = to_syscon(hw);
+ u16 val;
+
+ /* If no enable register defined, it's always-on */
+ if (!sclk->en_reg)
+ return 1;
+
+ val = readw(sclk->en_reg);
+ val &= BIT(sclk->en_bit);
+
+ return val ? 1 : 0;
+}
+
+static u16 syscon_get_perf(void)
+{
+ u16 val;
+
+ val = readw(syscon_vbase + U300_SYSCON_CCR);
+ val &= U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
+ return val;
+}
+
+static unsigned long
+syscon_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_syscon *sclk = to_syscon(hw);
+ u16 perf = syscon_get_perf();
+
+ switch(sclk->clk_val) {
+ case U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN:
+ case U300_SYSCON_SBCER_I2C0_CLK_EN:
+ case U300_SYSCON_SBCER_I2C1_CLK_EN:
+ case U300_SYSCON_SBCER_MMC_CLK_EN:
+ case U300_SYSCON_SBCER_SPI_CLK_EN:
+ /* The FAST clocks have one progression */
+ switch(perf) {
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+ return 13000000;
+ default:
+ return parent_rate; /* 26 MHz */
+ }
+ case U300_SYSCON_SBCER_DMAC_CLK_EN:
+ case U300_SYSCON_SBCER_NANDIF_CLK_EN:
+ case U300_SYSCON_SBCER_XGAM_CLK_EN:
+ /* AMBA interconnect peripherals */
+ switch(perf) {
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+ return 6500000;
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+ return 26000000;
+ default:
+ return parent_rate; /* 52 MHz */
+ }
+ case U300_SYSCON_SBCER_SEMI_CLK_EN:
+ case U300_SYSCON_SBCER_EMIF_CLK_EN:
+ /* EMIF speeds */
+ switch(perf) {
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+ return 13000000;
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+ return 52000000;
+ default:
+ return 104000000;
+ }
+ case U300_SYSCON_SBCER_CPU_CLK_EN:
+ /* And the fast CPU clock */
+ switch(perf) {
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+ return 13000000;
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+ return 52000000;
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+ return 104000000;
+ default:
+ return parent_rate; /* 208 MHz */
+ }
+ default:
+ /*
+ * The SLOW clocks and default just inherit the rate of
+ * their parent (typically PLL13 13 MHz).
+ */
+ return parent_rate;
+ }
+}
+
+static long
+syscon_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct clk_syscon *sclk = to_syscon(hw);
+
+ if (sclk->clk_val != U300_SYSCON_SBCER_CPU_CLK_EN)
+ return *prate;
+ /* We really only support setting the rate of the CPU clock */
+ if (rate <= 13000000)
+ return 13000000;
+ if (rate <= 52000000)
+ return 52000000;
+ if (rate <= 104000000)
+ return 104000000;
+ return 208000000;
+}
+
+static int syscon_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_syscon *sclk = to_syscon(hw);
+ u16 val;
+
+ /* We only support setting the rate of the CPU clock */
+ if (sclk->clk_val != U300_SYSCON_SBCER_CPU_CLK_EN)
+ return -EINVAL;
+ switch (rate) {
+ case 13000000:
+ val = U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER;
+ break;
+ case 52000000:
+ val = U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE;
+ break;
+ case 104000000:
+ val = U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH;
+ break;
+ case 208000000:
+ val = U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST;
+ break;
+ default:
+ return -EINVAL;
+ }
+ val |= readw(syscon_vbase + U300_SYSCON_CCR) &
+ ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK ;
+ writew(val, syscon_vbase + U300_SYSCON_CCR);
+ return 0;
+}
+
+static const struct clk_ops syscon_clk_ops = {
+ .prepare = syscon_clk_prepare,
+ .unprepare = syscon_clk_unprepare,
+ .enable = syscon_clk_enable,
+ .disable = syscon_clk_disable,
+ .is_enabled = syscon_clk_is_enabled,
+ .recalc_rate = syscon_clk_recalc_rate,
+ .round_rate = syscon_clk_round_rate,
+ .set_rate = syscon_clk_set_rate,
+};
+
+static struct clk * __init
+syscon_clk_register(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ bool hw_ctrld,
+ void __iomem *res_reg, u8 res_bit,
+ void __iomem *en_reg, u8 en_bit,
+ u16 clk_val)
+{
+ struct clk *clk;
+ struct clk_syscon *sclk;
+ struct clk_init_data init;
+
+ sclk = kzalloc(sizeof(struct clk_syscon), GFP_KERNEL);
+ if (!sclk) {
+ pr_err("could not allocate syscon clock %s\n",
+ name);
+ return ERR_PTR(-ENOMEM);
+ }
+ init.name = name;
+ init.ops = &syscon_clk_ops;
+ init.flags = flags;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+ sclk->hw.init = &init;
+ sclk->hw_ctrld = hw_ctrld;
+ /* Assume the block is in reset at registration */
+ sclk->reset = true;
+ sclk->res_reg = res_reg;
+ sclk->res_bit = res_bit;
+ sclk->en_reg = en_reg;
+ sclk->en_bit = en_bit;
+ sclk->clk_val = clk_val;
+
+ clk = clk_register(dev, &sclk->hw);
+ if (IS_ERR(clk))
+ kfree(sclk);
+
+ return clk;
+}
+
+/**
+ * struct clk_mclk - U300 MCLK clock (MMC/SD clock)
+ * @hw: corresponding clock hardware entry
+ * @is_mspro: if this is the memory stick clock rather than MMC/SD
+ */
+struct clk_mclk {
+ struct clk_hw hw;
+ bool is_mspro;
+};
+
+#define to_mclk(_hw) container_of(_hw, struct clk_mclk, hw)
+
+static int mclk_clk_prepare(struct clk_hw *hw)
+{
+ struct clk_mclk *mclk = to_mclk(hw);
+ u16 val;
+
+ /* The MMC and MSPRO clocks need some special set-up */
+ if (!mclk->is_mspro) {
+ /* Set default MMC clock divisor to 18.9 MHz */
+ writew(0x0054U, syscon_vbase + U300_SYSCON_MMF0R);
+ val = readw(syscon_vbase + U300_SYSCON_MMCR);
+ /* Disable the MMC feedback clock */
+ val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
+ /* Disable MSPRO frequency */
+ val &= ~U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
+ writew(val, syscon_vbase + U300_SYSCON_MMCR);
+ } else {
+ val = readw(syscon_vbase + U300_SYSCON_MMCR);
+ /* Disable the MMC feedback clock */
+ val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
+ /* Enable MSPRO frequency */
+ val |= U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
+ writew(val, syscon_vbase + U300_SYSCON_MMCR);
+ }
+
+ return 0;
+}
+
+static unsigned long
+mclk_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ u16 perf = syscon_get_perf();
+
+ switch (perf) {
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+ /*
+ * Here, the 208 MHz PLL gets shut down and the always
+ * on 13 MHz PLL used for RTC etc kicks into use
+ * instead.
+ */
+ return 13000000;
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
+ {
+ /*
+ * This clock is under program control. The register is
+ * divided in two nybbles, bit 7-4 gives cycles-1 to count
+ * high, bit 3-0 gives cycles-1 to count low. Distribute
+ * these with no more than 1 cycle difference between
+ * low and high and add low and high to get the actual
+ * divisor. The base PLL is 208 MHz. Writing 0x00 will
+ * divide by 1 and 1 so the highest frequency possible
+ * is 104 MHz.
+ *
+ * e.g. 0x54 =>
+ * f = 208 / ((5+1) + (4+1)) = 208 / 11 = 18.9 MHz
+ */
+ u16 val = readw(syscon_vbase + U300_SYSCON_MMF0R) &
+ U300_SYSCON_MMF0R_MASK;
+ switch (val) {
+ case 0x0054:
+ return 18900000;
+ case 0x0044:
+ return 20800000;
+ case 0x0043:
+ return 23100000;
+ case 0x0033:
+ return 26000000;
+ case 0x0032:
+ return 29700000;
+ case 0x0022:
+ return 34700000;
+ case 0x0021:
+ return 41600000;
+ case 0x0011:
+ return 52000000;
+ case 0x0000:
+ return 104000000;
+ default:
+ break;
+ }
+ }
+ default:
+ break;
+ }
+ return parent_rate;
+}
+
+static long
+mclk_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ if (rate <= 18900000)
+ return 18900000;
+ if (rate <= 20800000)
+ return 20800000;
+ if (rate <= 23100000)
+ return 23100000;
+ if (rate <= 26000000)
+ return 26000000;
+ if (rate <= 29700000)
+ return 29700000;
+ if (rate <= 34700000)
+ return 34700000;
+ if (rate <= 41600000)
+ return 41600000;
+ /* Highest rate */
+ return 52000000;
+}
+
+static int mclk_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ u16 val;
+ u16 reg;
+
+ switch (rate) {
+ case 18900000:
+ val = 0x0054;
+ break;
+ case 20800000:
+ val = 0x0044;
+ break;
+ case 23100000:
+ val = 0x0043;
+ break;
+ case 26000000:
+ val = 0x0033;
+ break;
+ case 29700000:
+ val = 0x0032;
+ break;
+ case 34700000:
+ val = 0x0022;
+ break;
+ case 41600000:
+ val = 0x0021;
+ break;
+ case 52000000:
+ val = 0x0011;
+ break;
+ case 104000000:
+ val = 0x0000;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ reg = readw(syscon_vbase + U300_SYSCON_MMF0R) &
+ ~U300_SYSCON_MMF0R_MASK;
+ writew(reg | val, syscon_vbase + U300_SYSCON_MMF0R);
+ return 0;
+}
+
+static const struct clk_ops mclk_ops = {
+ .prepare = mclk_clk_prepare,
+ .recalc_rate = mclk_clk_recalc_rate,
+ .round_rate = mclk_clk_round_rate,
+ .set_rate = mclk_clk_set_rate,
+};
+
+static struct clk * __init
+mclk_clk_register(struct device *dev, const char *name,
+ const char *parent_name, bool is_mspro)
+{
+ struct clk *clk;
+ struct clk_mclk *mclk;
+ struct clk_init_data init;
+
+ mclk = kzalloc(sizeof(struct clk_mclk), GFP_KERNEL);
+ if (!mclk) {
+ pr_err("could not allocate MMC/SD clock %s\n",
+ name);
+ return ERR_PTR(-ENOMEM);
+ }
+ init.name = "mclk";
+ init.ops = &mclk_ops;
+ init.flags = 0;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+ mclk->hw.init = &init;
+ mclk->is_mspro = is_mspro;
+
+ clk = clk_register(dev, &mclk->hw);
+ if (IS_ERR(clk))
+ kfree(mclk);
+
+ return clk;
+}
+
+void __init u300_clk_init(void __iomem *base)
+{
+ u16 val;
+ struct clk *clk;
+
+ syscon_vbase = base;
+
+ /* Set system to run at PLL208, max performance, a known state. */
+ val = readw(syscon_vbase + U300_SYSCON_CCR);
+ val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
+ writew(val, syscon_vbase + U300_SYSCON_CCR);
+ /* Wait for the PLL208 to lock if not locked in yet */
+ while (!(readw(syscon_vbase + U300_SYSCON_CSR) &
+ U300_SYSCON_CSR_PLL208_LOCK_IND));
+
+ /* Power management enable */
+ val = readw(syscon_vbase + U300_SYSCON_PMCR);
+ val |= U300_SYSCON_PMCR_PWR_MGNT_ENABLE;
+ writew(val, syscon_vbase + U300_SYSCON_PMCR);
+
+ /* These are always available (RTC and PLL13) */
+ clk = clk_register_fixed_rate(NULL, "app_32_clk", NULL,
+ CLK_IS_ROOT, 32768);
+ /* The watchdog sits directly on the 32 kHz clock */
+ clk_register_clkdev(clk, NULL, "coh901327_wdog");
+ clk = clk_register_fixed_rate(NULL, "pll13", NULL,
+ CLK_IS_ROOT, 13000000);
+
+ /* These derive from PLL208 */
+ clk = clk_register_fixed_rate(NULL, "pll208", NULL,
+ CLK_IS_ROOT, 208000000);
+ clk = clk_register_fixed_factor(NULL, "app_208_clk", "pll208",
+ 0, 1, 1);
+ clk = clk_register_fixed_factor(NULL, "app_104_clk", "pll208",
+ 0, 1, 2);
+ clk = clk_register_fixed_factor(NULL, "app_52_clk", "pll208",
+ 0, 1, 4);
+ /* The 52 MHz is divided down to 26 MHz */
+ clk = clk_register_fixed_factor(NULL, "app_26_clk", "app_52_clk",
+ 0, 1, 2);
+
+ /* Directly on the AMBA interconnect */
+ clk = syscon_clk_register(NULL, "cpu_clk", "app_208_clk", 0, true,
+ syscon_vbase + U300_SYSCON_RRR, 3,
+ syscon_vbase + U300_SYSCON_CERR, 3,
+ U300_SYSCON_SBCER_CPU_CLK_EN);
+ clk = syscon_clk_register(NULL, "dmac_clk", "app_52_clk", 0, true,
+ syscon_vbase + U300_SYSCON_RRR, 4,
+ syscon_vbase + U300_SYSCON_CERR, 4,
+ U300_SYSCON_SBCER_DMAC_CLK_EN);
+ clk_register_clkdev(clk, NULL, "dma");
+ clk = syscon_clk_register(NULL, "fsmc_clk", "app_52_clk", 0, false,
+ syscon_vbase + U300_SYSCON_RRR, 6,
+ syscon_vbase + U300_SYSCON_CERR, 6,
+ U300_SYSCON_SBCER_NANDIF_CLK_EN);
+ clk_register_clkdev(clk, NULL, "fsmc-nand");
+ clk = syscon_clk_register(NULL, "xgam_clk", "app_52_clk", 0, true,
+ syscon_vbase + U300_SYSCON_RRR, 8,
+ syscon_vbase + U300_SYSCON_CERR, 8,
+ U300_SYSCON_SBCER_XGAM_CLK_EN);
+ clk_register_clkdev(clk, NULL, "xgam");
+ clk = syscon_clk_register(NULL, "semi_clk", "app_104_clk", 0, false,
+ syscon_vbase + U300_SYSCON_RRR, 9,
+ syscon_vbase + U300_SYSCON_CERR, 9,
+ U300_SYSCON_SBCER_SEMI_CLK_EN);
+ clk_register_clkdev(clk, NULL, "semi");
+
+ /* AHB bridge clocks */
+ clk = syscon_clk_register(NULL, "ahb_subsys_clk", "app_52_clk", 0, true,
+ syscon_vbase + U300_SYSCON_RRR, 10,
+ syscon_vbase + U300_SYSCON_CERR, 10,
+ U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN);
+ clk = syscon_clk_register(NULL, "intcon_clk", "ahb_subsys_clk", 0, false,
+ syscon_vbase + U300_SYSCON_RRR, 12,
+ syscon_vbase + U300_SYSCON_CERR, 12,
+ /* Cannot be enabled, just taken out of reset */
+ 0xFFFFU);
+ clk_register_clkdev(clk, NULL, "intcon");
+ clk = syscon_clk_register(NULL, "emif_clk", "ahb_subsys_clk", 0, false,
+ syscon_vbase + U300_SYSCON_RRR, 5,
+ syscon_vbase + U300_SYSCON_CERR, 5,
+ U300_SYSCON_SBCER_EMIF_CLK_EN);
+ clk_register_clkdev(clk, NULL, "pl172");
+
+ /* FAST bridge clocks */
+ clk = syscon_clk_register(NULL, "fast_clk", "app_26_clk", 0, true,
+ syscon_vbase + U300_SYSCON_RFR, 0,
+ syscon_vbase + U300_SYSCON_CEFR, 0,
+ U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN);
+ clk = syscon_clk_register(NULL, "i2c0_p_clk", "fast_clk", 0, false,
+ syscon_vbase + U300_SYSCON_RFR, 1,
+ syscon_vbase + U300_SYSCON_CEFR, 1,
+ U300_SYSCON_SBCER_I2C0_CLK_EN);
+ clk_register_clkdev(clk, NULL, "stu300.0");
+ clk = syscon_clk_register(NULL, "i2c1_p_clk", "fast_clk", 0, false,
+ syscon_vbase + U300_SYSCON_RFR, 2,
+ syscon_vbase + U300_SYSCON_CEFR, 2,
+ U300_SYSCON_SBCER_I2C1_CLK_EN);
+ clk_register_clkdev(clk, NULL, "stu300.1");
+ clk = syscon_clk_register(NULL, "mmc_p_clk", "fast_clk", 0, false,
+ syscon_vbase + U300_SYSCON_RFR, 5,
+ syscon_vbase + U300_SYSCON_CEFR, 5,
+ U300_SYSCON_SBCER_MMC_CLK_EN);
+ clk_register_clkdev(clk, "apb_pclk", "mmci");
+ clk = syscon_clk_register(NULL, "spi_p_clk", "fast_clk", 0, false,
+ syscon_vbase + U300_SYSCON_RFR, 6,
+ syscon_vbase + U300_SYSCON_CEFR, 6,
+ U300_SYSCON_SBCER_SPI_CLK_EN);
+ /* The SPI has no external clock for the outward bus, uses the pclk */
+ clk_register_clkdev(clk, NULL, "pl022");
+ clk_register_clkdev(clk, "apb_pclk", "pl022");
+
+ /* SLOW bridge clocks */
+ clk = syscon_clk_register(NULL, "slow_clk", "pll13", 0, true,
+ syscon_vbase + U300_SYSCON_RSR, 0,
+ syscon_vbase + U300_SYSCON_CESR, 0,
+ U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN);
+ clk = syscon_clk_register(NULL, "uart0_clk", "slow_clk", 0, false,
+ syscon_vbase + U300_SYSCON_RSR, 1,
+ syscon_vbase + U300_SYSCON_CESR, 1,
+ U300_SYSCON_SBCER_UART_CLK_EN);
+ /* Same clock is used for APB and outward bus */
+ clk_register_clkdev(clk, NULL, "uart0");
+ clk_register_clkdev(clk, "apb_pclk", "uart0");
+ clk = syscon_clk_register(NULL, "gpio_clk", "slow_clk", 0, false,
+ syscon_vbase + U300_SYSCON_RSR, 4,
+ syscon_vbase + U300_SYSCON_CESR, 4,
+ U300_SYSCON_SBCER_GPIO_CLK_EN);
+ clk_register_clkdev(clk, NULL, "u300-gpio");
+ clk = syscon_clk_register(NULL, "keypad_clk", "slow_clk", 0, false,
+ syscon_vbase + U300_SYSCON_RSR, 5,
+ syscon_vbase + U300_SYSCON_CESR, 6,
+ U300_SYSCON_SBCER_KEYPAD_CLK_EN);
+ clk_register_clkdev(clk, NULL, "coh901461-keypad");
+ clk = syscon_clk_register(NULL, "rtc_clk", "slow_clk", 0, true,
+ syscon_vbase + U300_SYSCON_RSR, 6,
+ /* No clock enable register bit */
+ NULL, 0, 0xFFFFU);
+ clk_register_clkdev(clk, NULL, "rtc-coh901331");
+ clk = syscon_clk_register(NULL, "app_tmr_clk", "slow_clk", 0, false,
+ syscon_vbase + U300_SYSCON_RSR, 7,
+ syscon_vbase + U300_SYSCON_CESR, 7,
+ U300_SYSCON_SBCER_APP_TMR_CLK_EN);
+ clk_register_clkdev(clk, NULL, "apptimer");
+ clk = syscon_clk_register(NULL, "acc_tmr_clk", "slow_clk", 0, false,
+ syscon_vbase + U300_SYSCON_RSR, 8,
+ syscon_vbase + U300_SYSCON_CESR, 8,
+ U300_SYSCON_SBCER_ACC_TMR_CLK_EN);
+ clk_register_clkdev(clk, NULL, "timer");
+
+ /* Then this special MMC/SD clock */
+ clk = mclk_clk_register(NULL, "mmc_clk", "mmc_p_clk", false);
+ clk_register_clkdev(clk, NULL, "mmci");
+}
diff --git a/include/linux/platform_data/clk-u300.h b/include/linux/platform_data/clk-u300.h
new file mode 100644
index 000000000000..8429e73911a1
--- /dev/null
+++ b/include/linux/platform_data/clk-u300.h
@@ -0,0 +1 @@
+void __init u300_clk_init(void __iomem *base);