summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorTony Lindgren <tony@atomide.com>2015-03-18 13:41:34 -0700
committerTony Lindgren <tony@atomide.com>2015-03-18 13:41:34 -0700
commit599c376c49323127c9bdbb0fa61a3d4743819bc2 (patch)
treeebaa9e4673ed1853d652da343dc723894e67218a
parent077155332265f1d64c57bd6c49748a8b7e72a3f9 (diff)
ARM: dts: Fix gpio interrupts for dm816x
Commit 7800064ba507 ("ARM: dts: Add basic dm816x device tree configuration") added basic devices for dm816x, but I was not able to test the GPIO interrupts earlier until I found some suitable pins to test with. We can mux the MMC card detect and write protect pins from SD_SDCD and SD_SDWP mode to use a normal GPIO interrupts that are also suitable for the MMC subsystem. This turned out several issues that need to be fixed: - I set the GPIO type wrong to be compatible with omap3 instead of omap4. The GPIO controller on dm816x has EOI interrupt register like omap4 and am335x. - I got the GPIO interrupt numbers wrong as each bank has two and we only use one. They need to be set up the same way as on am335x. - The gpio banks are missing interrupt controller related properties. With these changes the GPIO interrupts can be used with the MMC card detect pin, so let's wire that up. Let's also mux all the MMC lines for completeness while at it. For the first GPIO bank I tested using GPMC lines temporarily muxed to GPIOs on the dip switch 10. Cc: Brian Hutchinson <b.hutchman@gmail.com> Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-rw-r--r--arch/arm/boot/dts/dm8168-evm.dts19
-rw-r--r--arch/arm/boot/dts/dm816x.dtsi18
2 files changed, 33 insertions, 4 deletions
diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts
index d3a29c1b8417..afe678f6d2e9 100644
--- a/arch/arm/boot/dts/dm8168-evm.dts
+++ b/arch/arm/boot/dts/dm8168-evm.dts
@@ -36,6 +36,20 @@
>;
};
+ mmc_pins: pinmux_mmc_pins {
+ pinctrl-single,pins = <
+ DM816X_IOPAD(0x0a70, MUX_MODE0) /* SD_POW */
+ DM816X_IOPAD(0x0a74, MUX_MODE0) /* SD_CLK */
+ DM816X_IOPAD(0x0a78, MUX_MODE0) /* SD_CMD */
+ DM816X_IOPAD(0x0a7C, MUX_MODE0) /* SD_DAT0 */
+ DM816X_IOPAD(0x0a80, MUX_MODE0) /* SD_DAT1 */
+ DM816X_IOPAD(0x0a84, MUX_MODE0) /* SD_DAT2 */
+ DM816X_IOPAD(0x0a88, MUX_MODE0) /* SD_DAT2 */
+ DM816X_IOPAD(0x0a8c, MUX_MODE2) /* GP1[7] */
+ DM816X_IOPAD(0x0a90, MUX_MODE2) /* GP1[8] */
+ >;
+ };
+
usb0_pins: pinmux_usb0_pins {
pinctrl-single,pins = <
DM816X_IOPAD(0x0d00, MUX_MODE0) /* USB0_DRVVBUS */
@@ -137,7 +151,12 @@
};
&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc_pins>;
vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <4>;
+ cd-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
};
/* At least dm8168-evm rev c won't support multipoint, later may */
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
index 3c97b5f2addc..f35715bc6992 100644
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -150,17 +150,27 @@
};
gpio1: gpio@48032000 {
- compatible = "ti,omap3-gpio";
+ compatible = "ti,omap4-gpio";
ti,hwmods = "gpio1";
+ ti,gpio-always-on;
reg = <0x48032000 0x1000>;
- interrupts = <97>;
+ interrupts = <96>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
gpio2: gpio@4804c000 {
- compatible = "ti,omap3-gpio";
+ compatible = "ti,omap4-gpio";
ti,hwmods = "gpio2";
+ ti,gpio-always-on;
reg = <0x4804c000 0x1000>;
- interrupts = <99>;
+ interrupts = <98>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
gpmc: gpmc@50000000 {