spi: Header and core clean up and refactoring

Merge series from Andy Shevchenko <andriy.shevchenko@linux.intel.com>:

Various cleanups and refactorings of the SPI header and core parts
united in a single series. It also touches drivers under SPI subsystem
folder on the pure renaming purposes of some constants.

No functional change intended.

36 files changed, 213 insertions, 217 deletions

diff --git a/drivers/spi/spi-amd.c b/drivers/spi/spi-amd.c
index fecead757a3c..b19766571f28 100644
--- a/drivers/spi/spi-amd.c
+++ b/drivers/spi/spi-amd.c
@@ -404,7 +404,7 @@ static int amd_spi_probe(struct platform_device *pdev)
 	master->bus_num = 0;
 	master->num_chipselect = 4;
 	master->mode_bits = 0;
-	master->flags = SPI_MASTER_HALF_DUPLEX;
+	master->flags = SPI_CONTROLLER_HALF_DUPLEX;
 	master->max_speed_hz = AMD_SPI_MAX_HZ;
 	master->min_speed_hz = AMD_SPI_MIN_HZ;
 	master->setup = amd_spi_master_setup;
diff --git a/drivers/spi/spi-at91-usart.c b/drivers/spi/spi-at91-usart.c
index 7854d9790fe9..7dfe2b6c2990 100644
--- a/drivers/spi/spi-at91-usart.c
+++ b/drivers/spi/spi-at91-usart.c
@@ -527,7 +527,7 @@ static int at91_usart_spi_probe(struct platform_device *pdev)
 	controller->dev.of_node = pdev->dev.parent->of_node;
 	controller->bits_per_word_mask = SPI_BPW_MASK(8);
 	controller->setup = at91_usart_spi_setup;
-	controller->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX;
+	controller->flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX;
 	controller->transfer_one = at91_usart_spi_transfer_one;
 	controller->prepare_message = at91_usart_spi_prepare_message;
 	controller->unprepare_message = at91_usart_spi_unprepare_message;
diff --git a/drivers/spi/spi-ath79.c b/drivers/spi/spi-ath79.c
index d3dd21386f12..1b6d977d111c 100644
--- a/drivers/spi/spi-ath79.c
+++ b/drivers/spi/spi-ath79.c
@@ -185,7 +185,7 @@ static int ath79_spi_probe(struct platform_device *pdev)
 
 	host->use_gpio_descriptors = true;
 	host->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
-	host->flags = SPI_MASTER_GPIO_SS;
+	host->flags = SPI_CONTROLLER_GPIO_SS;
 	host->num_chipselect = 3;
 	host->mem_ops = &ath79_mem_ops;
 
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 8a9c8b92be8c..6aa8adbe4170 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -1471,8 +1471,8 @@ static int atmel_spi_probe(struct platform_device *pdev)
 	host->bus_num = pdev->id;
 	host->num_chipselect = 4;
 	host->setup = atmel_spi_setup;
-	host->flags = (SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX |
-			SPI_MASTER_GPIO_SS);
+	host->flags = (SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX |
+			SPI_CONTROLLER_GPIO_SS);
 	host->transfer_one = atmel_spi_one_transfer;
 	host->set_cs = atmel_spi_set_cs;
 	host->cleanup = atmel_spi_cleanup;
diff --git a/drivers/spi/spi-bitbang-txrx.h b/drivers/spi/spi-bitbang-txrx.h
index 2dcbe166df63..0cab48b7875b 100644
--- a/drivers/spi/spi-bitbang-txrx.h
+++ b/drivers/spi/spi-bitbang-txrx.h
@@ -57,7 +57,7 @@ bitbang_txrx_be_cpha0(struct spi_device *spi,
 	for (word <<= (32 - bits); likely(bits); bits--) {
 
 		/* setup MSB (to slave) on trailing edge */
-		if ((flags & SPI_MASTER_NO_TX) == 0) {
+		if ((flags & SPI_CONTROLLER_NO_TX) == 0) {
 			if ((word & (1 << 31)) != oldbit) {
 				setmosi(spi, word & (1 << 31));
 				oldbit = word & (1 << 31);
@@ -70,7 +70,7 @@ bitbang_txrx_be_cpha0(struct spi_device *spi,
 
 		/* sample MSB (from slave) on leading edge */
 		word <<= 1;
-		if ((flags & SPI_MASTER_NO_RX) == 0)
+		if ((flags & SPI_CONTROLLER_NO_RX) == 0)
 			word |= getmiso(spi);
 		setsck(spi, cpol);
 	}
@@ -90,7 +90,7 @@ bitbang_txrx_be_cpha1(struct spi_device *spi,
 
 		/* setup MSB (to slave) on leading edge */
 		setsck(spi, !cpol);
-		if ((flags & SPI_MASTER_NO_TX) == 0) {
+		if ((flags & SPI_CONTROLLER_NO_TX) == 0) {
 			if ((word & (1 << 31)) != oldbit) {
 				setmosi(spi, word & (1 << 31));
 				oldbit = word & (1 << 31);
@@ -103,7 +103,7 @@ bitbang_txrx_be_cpha1(struct spi_device *spi,
 
 		/* sample MSB (from slave) on trailing edge */
 		word <<= 1;
-		if ((flags & SPI_MASTER_NO_RX) == 0)
+		if ((flags & SPI_CONTROLLER_NO_RX) == 0)
 			word |= getmiso(spi);
 	}
 	return word;
@@ -122,7 +122,7 @@ bitbang_txrx_le_cpha0(struct spi_device *spi,
 	for (; likely(bits); bits--) {
 
 		/* setup LSB (to slave) on trailing edge */
-		if ((flags & SPI_MASTER_NO_TX) == 0) {
+		if ((flags & SPI_CONTROLLER_NO_TX) == 0) {
 			if ((word & 1) != oldbit) {
 				setmosi(spi, word & 1);
 				oldbit = word & 1;
@@ -135,7 +135,7 @@ bitbang_txrx_le_cpha0(struct spi_device *spi,
 
 		/* sample LSB (from slave) on leading edge */
 		word >>= 1;
-		if ((flags & SPI_MASTER_NO_RX) == 0)
+		if ((flags & SPI_CONTROLLER_NO_RX) == 0)
 			word |= getmiso(spi) << rxbit;
 		setsck(spi, cpol);
 	}
@@ -156,7 +156,7 @@ bitbang_txrx_le_cpha1(struct spi_device *spi,
 
 		/* setup LSB (to slave) on leading edge */
 		setsck(spi, !cpol);
-		if ((flags & SPI_MASTER_NO_TX) == 0) {
+		if ((flags & SPI_CONTROLLER_NO_TX) == 0) {
 			if ((word & 1) != oldbit) {
 				setmosi(spi, word & 1);
 				oldbit = word & 1;
@@ -169,7 +169,7 @@ bitbang_txrx_le_cpha1(struct spi_device *spi,
 
 		/* sample LSB (from slave) on trailing edge */
 		word >>= 1;
-		if ((flags & SPI_MASTER_NO_RX) == 0)
+		if ((flags & SPI_CONTROLLER_NO_RX) == 0)
 			word |= getmiso(spi) << rxbit;
 	}
 	return word;
diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c
index 27d0087f8688..ecd44016c197 100644
--- a/drivers/spi/spi-bitbang.c
+++ b/drivers/spi/spi-bitbang.c
@@ -248,7 +248,7 @@ static int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t)
 	if (spi->mode & SPI_3WIRE) {
 		unsigned flags;
 
-		flags = t->tx_buf ? SPI_MASTER_NO_RX : SPI_MASTER_NO_TX;
+		flags = t->tx_buf ? SPI_CONTROLLER_NO_RX : SPI_CONTROLLER_NO_TX;
 		return cs->txrx_bufs(spi, cs->txrx_word, nsecs, t, flags);
 	}
 	return cs->txrx_bufs(spi, cs->txrx_word, nsecs, t, 0);
@@ -349,11 +349,11 @@ int spi_bitbang_init(struct spi_bitbang *bitbang)
 	/*
 	 * We only need the chipselect callback if we are actually using it.
 	 * If we just use GPIO descriptors, it is surplus. If the
-	 * SPI_MASTER_GPIO_SS flag is set, we always need to call the
+	 * SPI_CONTROLLER_GPIO_SS flag is set, we always need to call the
 	 * driver-specific chipselect routine.
 	 */
 	custom_cs = (!master->use_gpio_descriptors ||
-		     (master->flags & SPI_MASTER_GPIO_SS));
+		     (master->flags & SPI_CONTROLLER_GPIO_SS));
 
 	if (custom_cs && !bitbang->chipselect)
 		return -EINVAL;
@@ -371,7 +371,7 @@ int spi_bitbang_init(struct spi_bitbang *bitbang)
 	master->transfer_one = spi_bitbang_transfer_one;
 	/*
 	 * When using GPIO descriptors, the ->set_cs() callback doesn't even
-	 * get called unless SPI_MASTER_GPIO_SS is set.
+	 * get called unless SPI_CONTROLLER_GPIO_SS is set.
 	 */
 	if (custom_cs)
 		master->set_cs = spi_bitbang_set_cs;
diff --git a/drivers/spi/spi-cavium-thunderx.c b/drivers/spi/spi-cavium-thunderx.c
index 60c0d6934654..535f7eb9fa69 100644
--- a/drivers/spi/spi-cavium-thunderx.c
+++ b/drivers/spi/spi-cavium-thunderx.c
@@ -64,7 +64,7 @@ static int thunderx_spi_probe(struct pci_dev *pdev,
 		p->sys_freq = SYS_FREQ_DEFAULT;
 	dev_info(dev, "Set system clock to %u\n", p->sys_freq);
 
-	master->flags = SPI_MASTER_HALF_DUPLEX;
+	master->flags = SPI_CONTROLLER_HALF_DUPLEX;
 	master->num_chipselect = 4;
 	master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_CS_HIGH |
 			    SPI_LSB_FIRST | SPI_3WIRE;
diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c
index a85fd0cb4a5e..a3470cbaabdc 100644
--- a/drivers/spi/spi-davinci.c
+++ b/drivers/spi/spi-davinci.c
@@ -930,7 +930,7 @@ static int davinci_spi_probe(struct platform_device *pdev)
 	master->bus_num = pdev->id;
 	master->num_chipselect = pdata->num_chipselect;
 	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 16);
-	master->flags = SPI_MASTER_MUST_RX | SPI_MASTER_GPIO_SS;
+	master->flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_GPIO_SS;
 	master->setup = davinci_spi_setup;
 	master->cleanup = davinci_spi_cleanup;
 	master->can_dma = davinci_spi_can_dma;
diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c
index a8ba41ad4541..45f5acc26b1d 100644
--- a/drivers/spi/spi-dw-core.c
+++ b/drivers/spi/spi-dw-core.c
@@ -932,7 +932,7 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
 	if (dws->mem_ops.exec_op)
 		master->mem_ops = &dws->mem_ops;
 	master->max_speed_hz = dws->max_freq;
-	master->flags = SPI_MASTER_GPIO_SS;
+	master->flags = SPI_CONTROLLER_GPIO_SS;
 	master->auto_runtime_pm = true;
 
 	/* Get default rx sample delay */
diff --git a/drivers/spi/spi-falcon.c b/drivers/spi/spi-falcon.c
index 4c103dff0d44..8a8414cbb400 100644
--- a/drivers/spi/spi-falcon.c
+++ b/drivers/spi/spi-falcon.c
@@ -401,7 +401,7 @@ static int falcon_sflash_probe(struct platform_device *pdev)
 	priv->master = master;
 
 	master->mode_bits = SPI_MODE_3;
-	master->flags = SPI_MASTER_HALF_DUPLEX;
+	master->flags = SPI_CONTROLLER_HALF_DUPLEX;
 	master->setup = falcon_sflash_setup;
 	master->transfer_one_message = falcon_sflash_xfer_one;
 	master->dev.of_node = pdev->dev.of_node;
diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
index fb68c72df171..1c907d5d5bb3 100644
--- a/drivers/spi/spi-fsl-lpspi.c
+++ b/drivers/spi/spi-fsl-lpspi.c
@@ -856,7 +856,7 @@ static int fsl_lpspi_probe(struct platform_device *pdev)
 	controller->prepare_transfer_hardware = lpspi_prepare_xfer_hardware;
 	controller->unprepare_transfer_hardware = lpspi_unprepare_xfer_hardware;
 	controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
-	controller->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX;
+	controller->flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX;
 	controller->dev.of_node = pdev->dev.of_node;
 	controller->bus_num = pdev->id;
 	controller->num_chipselect = fsl_lpspi->num_cs;
diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c
index 092afc7679d4..612db477ad12 100644
--- a/drivers/spi/spi-gpio.c
+++ b/drivers/spi/spi-gpio.c
@@ -170,7 +170,7 @@ static u32 spi_gpio_txrx_word_mode3(struct spi_device *spi,
 
 /*
  * These functions do not call setmosi or getmiso if respective flag
- * (SPI_MASTER_NO_RX or SPI_MASTER_NO_TX) is set, so they are safe to
+ * (SPI_CONTROLLER_NO_RX or SPI_CONTROLLER_NO_TX) is set, so they are safe to
  * call when such pin is not present or defined in the controller.
  * A separate set of callbacks is defined to get highest possible
  * speed in the generic case (when both MISO and MOSI lines are
@@ -416,11 +416,11 @@ static int spi_gpio_probe(struct platform_device *pdev)
 	if (!spi_gpio->mosi) {
 		/* HW configuration without MOSI pin
 		 *
-		 * No setting SPI_MASTER_NO_RX here - if there is only
+		 * No setting SPI_CONTROLLER_NO_RX here - if there is only
 		 * a MOSI pin connected the host can still do RX by
 		 * changing the direction of the line.
 		 */
-		master->flags = SPI_MASTER_NO_TX;
+		master->flags = SPI_CONTROLLER_NO_TX;
 	}
 
 	master->bus_num = pdev->id;
@@ -434,11 +434,11 @@ static int spi_gpio_probe(struct platform_device *pdev)
 	 * line, that we need to do on selection. This makes the local
 	 * callback for chipselect always get called.
 	 */
-	master->flags |= SPI_MASTER_GPIO_SS;
+	master->flags |= SPI_CONTROLLER_GPIO_SS;
 	bb->chipselect = spi_gpio_chipselect;
 	bb->set_line_direction = spi_gpio_set_direction;
 
-	if (master->flags & SPI_MASTER_NO_TX) {
+	if (master->flags & SPI_CONTROLLER_NO_TX) {
 		bb->txrx_word[SPI_MODE_0] = spi_gpio_spec_txrx_word_mode0;
 		bb->txrx_word[SPI_MODE_1] = spi_gpio_spec_txrx_word_mode1;
 		bb->txrx_word[SPI_MODE_2] = spi_gpio_spec_txrx_word_mode2;
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 169d158b6f00..db22f685ce91 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -1784,7 +1784,7 @@ static int spi_imx_probe(struct platform_device *pdev)
 
 	if (is_imx51_ecspi(spi_imx) || is_imx53_ecspi(spi_imx)) {
 		controller->max_native_cs = 4;
-		controller->flags |= SPI_MASTER_GPIO_SS;
+		controller->flags |= SPI_CONTROLLER_GPIO_SS;
 	}
 
 	spi_imx->spi_drctl = spi_drctl;
diff --git a/drivers/spi/spi-lp8841-rtc.c b/drivers/spi/spi-lp8841-rtc.c
index 2d436541d6c2..c6810720b3b5 100644
--- a/drivers/spi/spi-lp8841-rtc.c
+++ b/drivers/spi/spi-lp8841-rtc.c
@@ -75,14 +75,14 @@ bitbang_txrx_be_cpha0_lsb(struct spi_lp8841_rtc *data,
 	for (; likely(bits); bits--) {
 
 		/* setup LSB (to slave) on leading edge */
-		if ((flags & SPI_MASTER_NO_TX) == 0)
+		if ((flags & SPI_CONTROLLER_NO_TX) == 0)
 			setmosi(data, (word & 1));
 
 		usleep_range(usecs, usecs + 1);	/* T(setup) */
 
 		/* sample LSB (from slave) on trailing edge */
 		word >>= 1;
-		if ((flags & SPI_MASTER_NO_RX) == 0)
+		if ((flags & SPI_CONTROLLER_NO_RX) == 0)
 			word |= (getmiso(data) << 31);
 
 		setsck(data, !cpol);
@@ -113,7 +113,7 @@ spi_lp8841_rtc_transfer_one(struct spi_master *master,
 		while (likely(count > 0)) {
 			word = *tx++;
 			bitbang_txrx_be_cpha0_lsb(data, 1, 0,
-					SPI_MASTER_NO_RX, word, 8);
+					SPI_CONTROLLER_NO_RX, word, 8);
 			count--;
 		}
 	} else if (rx) {
@@ -121,7 +121,7 @@ spi_lp8841_rtc_transfer_one(struct spi_master *master,
 		writeb(data->state, data->iomem);
 		while (likely(count > 0)) {
 			word = bitbang_txrx_be_cpha0_lsb(data, 1, 0,
-					SPI_MASTER_NO_TX, word, 8);
+					SPI_CONTROLLER_NO_TX, word, 8);
 			*rx++ = word;
 			count--;
 		}
@@ -191,7 +191,7 @@ spi_lp8841_rtc_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	platform_set_drvdata(pdev, master);
 
-	master->flags = SPI_MASTER_HALF_DUPLEX;
+	master->flags = SPI_CONTROLLER_HALF_DUPLEX;
 	master->mode_bits = SPI_CS_HIGH | SPI_3WIRE | SPI_LSB_FIRST;
 
 	master->bus_num = pdev->id;
diff --git a/drivers/spi/spi-meson-spicc.c b/drivers/spi/spi-meson-spicc.c
index 141562c882f1..7a9eba35ac38 100644
--- a/drivers/spi/spi-meson-spicc.c
+++ b/drivers/spi/spi-meson-spicc.c
@@ -864,7 +864,7 @@ static int meson_spicc_probe(struct platform_device *pdev)
 				     SPI_BPW_MASK(24) |
 				     SPI_BPW_MASK(16) |
 				     SPI_BPW_MASK(8);
-	master->flags = (SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX);
+	master->flags = (SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX);
 	master->min_speed_hz = spicc->data->min_speed_hz;
 	master->max_speed_hz = spicc->data->max_speed_hz;
 	master->setup = meson_spicc_setup;
diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index 39272ad6641b..0757985947dd 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -1142,7 +1142,7 @@ static int mtk_spi_probe(struct platform_device *pdev)
 		master->mode_bits |= SPI_CS_HIGH;
 
 	if (mdata->dev_comp->must_tx)
-		master->flags = SPI_MASTER_MUST_TX;
+		master->flags = SPI_CONTROLLER_MUST_TX;
 	if (mdata->dev_comp->ipm_design)
 		master->mode_bits |= SPI_LOOP | SPI_RX_DUAL | SPI_TX_DUAL |
 				     SPI_RX_QUAD | SPI_TX_QUAD;
diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c
index 963a53dd680b..cd0e7ae07162 100644
--- a/drivers/spi/spi-mxs.c
+++ b/drivers/spi/spi-mxs.c
@@ -572,7 +572,7 @@ static int mxs_spi_probe(struct platform_device *pdev)
 	master->mode_bits = SPI_CPOL | SPI_CPHA;
 	master->num_chipselect = 3;
 	master->dev.of_node = np;
-	master->flags = SPI_MASTER_HALF_DUPLEX;
+	master->flags = SPI_CONTROLLER_HALF_DUPLEX;
 	master->auto_runtime_pm = true;
 
 	spi = spi_master_get_devdata(master);
diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c
index 902d2e0c1f2f..f89aa9e52c23 100644
--- a/drivers/spi/spi-omap-uwire.c
+++ b/drivers/spi/spi-omap-uwire.c
@@ -486,7 +486,7 @@ static int uwire_probe(struct platform_device *pdev)
 	/* the spi->mode bits understood by this driver: */
 	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
 	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 16);
-	master->flags = SPI_MASTER_HALF_DUPLEX;
+	master->flags = SPI_CONTROLLER_HALF_DUPLEX;
 
 	master->bus_num = 2;	/* "official" */
 	master->num_chipselect = 4;
diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c
index ad9e83e34297..4882aafd0505 100644
--- a/drivers/spi/spi-orion.c
+++ b/drivers/spi/spi-orion.c
@@ -677,7 +677,7 @@ static int orion_spi_probe(struct platform_device *pdev)
 	master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
 	master->auto_runtime_pm = true;
 	master->use_gpio_descriptors = true;
-	master->flags = SPI_MASTER_GPIO_SS;
+	master->flags = SPI_CONTROLLER_GPIO_SS;
 
 	platform_set_drvdata(pdev, master);
 
diff --git a/drivers/spi/spi-pci1xxxx.c b/drivers/spi/spi-pci1xxxx.c
index 4445d82409d6..d23c42839da1 100644
--- a/drivers/spi/spi-pci1xxxx.c
+++ b/drivers/spi/spi-pci1xxxx.c
@@ -365,7 +365,7 @@ static int pci1xxxx_spi_probe(struct pci_dev *pdev, const struct pci_device_id *
 		spi_host->bits_per_word_mask = SPI_BPW_MASK(8);
 		spi_host->max_speed_hz = PCI1XXXX_SPI_MAX_CLOCK_HZ;
 		spi_host->min_speed_hz = PCI1XXXX_SPI_MIN_CLOCK_HZ;
-		spi_host->flags = SPI_MASTER_MUST_TX;
+		spi_host->flags = SPI_CONTROLLER_MUST_TX;
 		spi_master_set_devdata(spi_host, spi_sub_ptr);
 		ret = devm_spi_register_master(dev, spi_host);
 		if (ret)
diff --git a/drivers/spi/spi-pic32-sqi.c b/drivers/spi/spi-pic32-sqi.c
index 51dfb49523f3..5cbebcf26a2a 100644
--- a/drivers/spi/spi-pic32-sqi.c
+++ b/drivers/spi/spi-pic32-sqi.c
@@ -648,7 +648,7 @@ static int pic32_sqi_probe(struct platform_device *pdev)
 	master->dev.of_node	= pdev->dev.of_node;
 	master->mode_bits	= SPI_MODE_3 | SPI_MODE_0 | SPI_TX_DUAL |
 				  SPI_RX_DUAL | SPI_TX_QUAD | SPI_RX_QUAD;
-	master->flags		= SPI_MASTER_HALF_DUPLEX;
+	master->flags		= SPI_CONTROLLER_HALF_DUPLEX;
 	master->can_dma		= pic32_sqi_can_dma;
 	master->bits_per_word_mask	= SPI_BPW_RANGE_MASK(8, 32);
 	master->transfer_one_message	= pic32_sqi_one_message;
diff --git a/drivers/spi/spi-pic32.c b/drivers/spi/spi-pic32.c
index f2af5e653f3d..e9b4c9cb97fb 100644
--- a/drivers/spi/spi-pic32.c
+++ b/drivers/spi/spi-pic32.c
@@ -773,7 +773,7 @@ static int pic32_spi_probe(struct platform_device *pdev)
 	master->max_speed_hz	= clk_get_rate(pic32s->clk);
 	master->setup		= pic32_spi_setup;
 	master->cleanup		= pic32_spi_cleanup;
-	master->flags		= SPI_MASTER_MUST_TX | SPI_MASTER_MUST_RX;
+	master->flags		= SPI_CONTROLLER_MUST_TX | SPI_CONTROLLER_MUST_RX;
 	master->bits_per_word_mask	= SPI_BPW_MASK(8) | SPI_BPW_MASK(16) |
 					  SPI_BPW_MASK(32);
 	master->transfer_one		= pic32_spi_one_transfer;
diff --git a/drivers/spi/spi-qcom-qspi.c b/drivers/spi/spi-qcom-qspi.c
index a8a683d6145c..5a98c52bad32 100644
--- a/drivers/spi/spi-qcom-qspi.c
+++ b/drivers/spi/spi-qcom-qspi.c
@@ -724,7 +724,7 @@ static int qcom_qspi_probe(struct platform_device *pdev)
 	master->mode_bits = SPI_MODE_0 |
 			    SPI_TX_DUAL | SPI_RX_DUAL |
 			    SPI_TX_QUAD | SPI_RX_QUAD;
-	master->flags = SPI_MASTER_HALF_DUPLEX;
+	master->flags = SPI_CONTROLLER_HALF_DUPLEX;
 	master->prepare_message = qcom_qspi_prepare_message;
 	master->transfer_one = qcom_qspi_transfer_one;
 	master->handle_err = qcom_qspi_handle_err;
diff --git a/drivers/spi/spi-rb4xx.c b/drivers/spi/spi-rb4xx.c
index 5073736d3d1f..c817889a7797 100644
--- a/drivers/spi/spi-rb4xx.c
+++ b/drivers/spi/spi-rb4xx.c
@@ -156,7 +156,7 @@ static int rb4xx_spi_probe(struct platform_device *pdev)
 	master->num_chipselect = 3;
 	master->mode_bits = SPI_TX_DUAL;
 	master->bits_per_word_mask = SPI_BPW_MASK(8);
-	master->flags = SPI_MASTER_MUST_TX;
+	master->flags = SPI_CONTROLLER_MUST_TX;
 	master->transfer_one = rb4xx_transfer_one;
 	master->set_cs = rb4xx_set_cs;
 
diff --git a/drivers/spi/spi-rockchip-sfc.c b/drivers/spi/spi-rockchip-sfc.c
index 583f4187f030..bd550e76ab3d 100644
--- a/drivers/spi/spi-rockchip-sfc.c
+++ b/drivers/spi/spi-rockchip-sfc.c
@@ -565,7 +565,7 @@ static int rockchip_sfc_probe(struct platform_device *pdev)
 	if (!master)
 		return -ENOMEM;
 
-	master->flags = SPI_MASTER_HALF_DUPLEX;
+	master->flags = SPI_CONTROLLER_HALF_DUPLEX;
 	master->mem_ops = &rockchip_sfc_mem_ops;
 	master->dev.of_node = pdev->dev.of_node;
 	master->mode_bits = SPI_TX_QUAD | SPI_TX_DUAL | SPI_RX_QUAD | SPI_RX_DUAL;
diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
index 143ede958ac1..a37943847e81 100644
--- a/drivers/spi/spi-rockchip.c
+++ b/drivers/spi/spi-rockchip.c
@@ -858,7 +858,7 @@ static int rockchip_spi_probe(struct platform_device *pdev)
 		ctlr->mode_bits |= SPI_NO_CS;
 		ctlr->slave_abort = rockchip_spi_slave_abort;
 	} else {
-		ctlr->flags = SPI_MASTER_GPIO_SS;
+		ctlr->flags = SPI_CONTROLLER_GPIO_SS;
 		ctlr->max_native_cs = ROCKCHIP_SPI_MAX_CS_NUM;
 		/*
 		 * rk spi0 has two native cs, spi1..5 one cs only
diff --git a/drivers/spi/spi-sifive.c b/drivers/spi/spi-sifive.c
index dae9e097c333..2f77dae85386 100644
--- a/drivers/spi/spi-sifive.c
+++ b/drivers/spi/spi-sifive.c
@@ -379,7 +379,7 @@ static int sifive_spi_probe(struct platform_device *pdev)
 	 * we need to "left-align" the bits (unless SPI_LSB_FIRST)
 	 */
 	master->bits_per_word_mask = SPI_BPW_MASK(8);
-	master->flags = SPI_CONTROLLER_MUST_TX | SPI_MASTER_GPIO_SS;
+	master->flags = SPI_CONTROLLER_MUST_TX | SPI_CONTROLLER_GPIO_SS;
 	master->prepare_message = sifive_spi_prepare_message;
 	master->set_cs = sifive_spi_set_cs;
 	master->transfer_one = sifive_spi_transfer_one;
diff --git a/drivers/spi/spi-slave-mt27xx.c b/drivers/spi/spi-slave-mt27xx.c
index 4e4d426bfb43..6d6772974783 100644
--- a/drivers/spi/spi-slave-mt27xx.c
+++ b/drivers/spi/spi-slave-mt27xx.c
@@ -414,7 +414,7 @@ static int mtk_spi_slave_probe(struct platform_device *pdev)
 	mdata->dev_comp = of_id->data;
 
 	if (mdata->dev_comp->must_rx)
-		ctlr->flags = SPI_MASTER_MUST_RX;
+		ctlr->flags = SPI_CONTROLLER_MUST_RX;
 
 	platform_set_drvdata(pdev, ctlr);
 
diff --git a/drivers/spi/spi-sprd-adi.c b/drivers/spi/spi-sprd-adi.c
index 22e39c4c12c4..94d16aadfa44 100644
--- a/drivers/spi/spi-sprd-adi.c
+++ b/drivers/spi/spi-sprd-adi.c
@@ -580,7 +580,7 @@ static int sprd_adi_probe(struct platform_device *pdev)
 	ctlr->dev.of_node = pdev->dev.of_node;
 	ctlr->bus_num = pdev->id;
 	ctlr->num_chipselect = num_chipselect;
-	ctlr->flags = SPI_MASTER_HALF_DUPLEX;
+	ctlr->flags = SPI_CONTROLLER_HALF_DUPLEX;
 	ctlr->bits_per_word_mask = 0;
 	ctlr->transfer_one = sprd_adi_transfer_one;
 
diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 536d89e044cf..8cf7b41481b2 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -1753,7 +1753,7 @@ static const struct stm32_spi_cfg stm32f4_spi_cfg = {
 	.baud_rate_div_max = STM32F4_SPI_BR_DIV_MAX,
 	.has_fifo = false,
 	.has_device_mode = false,
-	.flags = SPI_MASTER_MUST_TX,
+	.flags = SPI_CONTROLLER_MUST_TX,
 };
 
 static const struct stm32_spi_cfg stm32h7_spi_cfg = {
diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c
index 5914335ff63d..bf4b40289bee 100644
--- a/drivers/spi/spi-ti-qspi.c
+++ b/drivers/spi/spi-ti-qspi.c
@@ -770,7 +770,7 @@ static int ti_qspi_probe(struct platform_device *pdev)
 
 	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_RX_DUAL | SPI_RX_QUAD;
 
-	master->flags = SPI_MASTER_HALF_DUPLEX;
+	master->flags = SPI_CONTROLLER_HALF_DUPLEX;
 	master->setup = ti_qspi_setup;
 	master->auto_runtime_pm = true;
 	master->transfer_one_message = ti_qspi_start_transfer_one;
diff --git a/drivers/spi/spi-xcomm.c b/drivers/spi/spi-xcomm.c
index ae6218bcd02a..a3d57554f5ba 100644
--- a/drivers/spi/spi-xcomm.c
+++ b/drivers/spi/spi-xcomm.c
@@ -218,7 +218,7 @@ static int spi_xcomm_probe(struct i2c_client *i2c)
 	master->num_chipselect = 16;
 	master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_3WIRE;
 	master->bits_per_word_mask = SPI_BPW_MASK(8);
-	master->flags = SPI_MASTER_HALF_DUPLEX;
+	master->flags = SPI_CONTROLLER_HALF_DUPLEX;
 	master->transfer_one_message = spi_xcomm_transfer_one;
 	master->dev.of_node = i2c->dev.of_node;
 	i2c_set_clientdata(i2c, master);
diff --git a/drivers/spi/spi-xtensa-xtfpga.c b/drivers/spi/spi-xtensa-xtfpga.c
index 24dc845b940e..dbd85d7a1526 100644
--- a/drivers/spi/spi-xtensa-xtfpga.c
+++ b/drivers/spi/spi-xtensa-xtfpga.c
@@ -87,7 +87,7 @@ static int xtfpga_spi_probe(struct platform_device *pdev)
 	if (!master)
 		return -ENOMEM;
 
-	master->flags = SPI_MASTER_NO_RX;
+	master->flags = SPI_CONTROLLER_NO_RX;
 	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 16);
 	master->bus_num = pdev->dev.id;
 	master->dev.of_node = pdev->dev.of_node;
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 9291b2a0e887..ae2693ba1744 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -4,36 +4,36 @@
 // Copyright (C) 2005 David Brownell
 // Copyright (C) 2008 Secret Lab Technologies Ltd.
 
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/init.h>
+#include <linux/acpi.h>
 #include <linux/cache.h>
-#include <linux/dma-mapping.h>
+#include <linux/clk/clk-conf.h>
+#include <linux/delay.h>
+#include <linux/device.h>
 #include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/export.h>
+#include <linux/gpio/consumer.h>
+#include <linux/highmem.h>
+#include <linux/idr.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/mod_devicetable.h>
 #include <linux/mutex.h>
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
-#include <linux/clk/clk-conf.h>
-#include <linux/slab.h>
-#include <linux/mod_devicetable.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi-mem.h>
-#include <linux/gpio/consumer.h>
-#include <linux/pm_runtime.h>
+#include <linux/percpu.h>
+#include <linux/platform_data/x86/apple.h>
 #include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
 #include <linux/property.h>
-#include <linux/export.h>
+#include <linux/ptp_clock_kernel.h>
 #include <linux/sched/rt.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi-mem.h>
 #include <uapi/linux/sched/types.h>
-#include <linux/delay.h>
-#include <linux/kthread.h>
-#include <linux/ioport.h>
-#include <linux/acpi.h>
-#include <linux/highmem.h>
-#include <linux/idr.h>
-#include <linux/platform_data/x86/apple.h>
-#include <linux/ptp_clock_kernel.h>
-#include <linux/percpu.h>
 
 #define CREATE_TRACE_POINTS
 #include <trace/events/spi.h>
@@ -64,7 +64,7 @@ modalias_show(struct device *dev, struct device_attribute *a, char *buf)
 	if (len != -ENODEV)
 		return len;
 
-	return sprintf(buf, "%s%s\n", SPI_MODULE_PREFIX, spi->modalias);
+	return sysfs_emit(buf, "%s%s\n", SPI_MODULE_PREFIX, spi->modalias);
 }
 static DEVICE_ATTR_RO(modalias);
 
@@ -89,7 +89,7 @@ static ssize_t driver_override_show(struct device *dev,
 	ssize_t len;
 
 	device_lock(dev);
-	len = snprintf(buf, PAGE_SIZE, "%s\n", spi->driver_override ? : "");
+	len = sysfs_emit(buf, "%s\n", spi->driver_override ? : "");
 	device_unlock(dev);
 	return len;
 }
@@ -682,7 +682,7 @@ static int __spi_add_device(struct spi_device *spi)
  * @spi: spi_device to register
  *
  * Companion function to spi_alloc_device.  Devices allocated with
- * spi_alloc_device can be added onto the spi bus with this function.
+ * spi_alloc_device can be added onto the SPI bus with this function.
  *
  * Return: 0 on success; negative errno on failure
  */
@@ -889,7 +889,7 @@ int spi_register_board_info(struct spi_board_info const *info, unsigned n)
  * spi_res_alloc - allocate a spi resource that is life-cycle managed
  *                 during the processing of a spi_message while using
  *                 spi_transfer_one
- * @spi:     the spi device for which we allocate memory
+ * @spi:     the SPI device for which we allocate memory
  * @release: the release code to execute for this resource
  * @size:    size to alloc and return
  * @gfp:     GFP allocation flags
@@ -915,7 +915,7 @@ static void *spi_res_alloc(struct spi_device *spi, spi_res_release_t release,
 }
 
 /**
- * spi_res_free - free an spi resource
+ * spi_res_free - free an SPI resource
  * @res: pointer to the custom data of a resource
  */
 static void spi_res_free(void *res)
@@ -931,7 +931,7 @@ static void spi_res_free(void *res)
 
 /**
  * spi_res_add - add a spi_res to the spi_message
- * @message: the spi message
+ * @message: the SPI message
  * @res:     the spi_resource
  */
 static void spi_res_add(struct spi_message *message, void *res)
@@ -943,7 +943,7 @@ static void spi_res_add(struct spi_message *message, void *res)
 }
 
 /**
- * spi_res_release - release all spi resources for this message
+ * spi_res_release - release all SPI resources for this message
  * @ctlr:  the @spi_controller
  * @message: the @spi_message
  */
@@ -1006,7 +1006,7 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force)
 				gpiod_set_value_cansleep(spi_get_csgpiod(spi, 0), activate);
 		}
 		/* Some SPI masters need both GPIO CS & slave_select */
-		if ((spi->controller->flags & SPI_MASTER_GPIO_SS) &&
+		if ((spi->controller->flags & SPI_CONTROLLER_GPIO_SS) &&
 		    spi->controller->set_cs)
 			spi->controller->set_cs(spi, !enable);
 	} else if (spi->controller->set_cs) {
@@ -1424,7 +1424,7 @@ int spi_delay_to_ns(struct spi_delay *_delay, struct spi_transfer *xfer)
 			return -EINVAL;
 		/*
 		 * If there is unknown effective speed, approximate it
-		 * by underestimating with half of the requested hz.
+		 * by underestimating with half of the requested Hz.
 		 */
 		hz = xfer->effective_speed_hz ?: xfer->speed_hz / 2;
 		if (!hz)
@@ -1739,11 +1739,11 @@ static int __spi_pump_transfer_message(struct spi_controller *ctlr,
 }
 
 /**
- * __spi_pump_messages - function which processes spi message queue
+ * __spi_pump_messages - function which processes SPI message queue
  * @ctlr: controller to process queue for
  * @in_kthread: true if we are in the context of the message pump thread
  *
- * This function checks if there is any spi message in the queue that
+ * This function checks if there is any SPI message in the queue that
  * needs processing and if so call out to the driver to initialize hardware
  * and transfer each message.
  *
@@ -1758,7 +1758,7 @@ static void __spi_pump_messages(struct spi_controller *ctlr, bool in_kthread)
 	unsigned long flags;
 	int ret;
 
-	/* Take the IO mutex */
+	/* Take the I/O mutex */
 	mutex_lock(&ctlr->io_mutex);
 
 	/* Lock queue */
@@ -2169,8 +2169,8 @@ static int __spi_queued_transfer(struct spi_device *spi,
 
 /**
  * spi_queued_transfer - transfer function for queued transfers
- * @spi: spi device which is requesting transfer
- * @msg: spi message which is to handled is queued to driver queue
+ * @spi: SPI device which is requesting transfer
+ * @msg: SPI message which is to handled is queued to driver queue
  *
  * Return: zero on success, else a negative error code.
  */
@@ -2399,9 +2399,6 @@ static void of_register_spi_devices(struct spi_controller *ctlr)
 	struct spi_device *spi;
 	struct device_node *nc;
 
-	if (!ctlr->dev.of_node)
-		return;
-
 	for_each_available_child_of_node(ctlr->dev.of_node, nc) {
 		if (of_node_test_and_set_flag(nc, OF_POPULATED))
 			continue;
@@ -2499,7 +2496,7 @@ static int acpi_spi_count(struct acpi_resource *ares, void *data)
  * acpi_spi_count_resources - Count the number of SpiSerialBus resources
  * @adev:	ACPI device
  *
- * Returns the number of SpiSerialBus resources in the ACPI-device's
+ * Return: the number of SpiSerialBus resources in the ACPI-device's
  * resource-list; or a negative error code.
  */
 int acpi_spi_count_resources(struct acpi_device *adev)
@@ -2633,10 +2630,10 @@ static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
  * @adev: ACPI Device for the spi device
  * @index: Index of the spi resource inside the ACPI Node
  *
- * This should be used to allocate a new spi device from and ACPI Node.
- * The caller is responsible for calling spi_add_device to register the spi device.
+ * This should be used to allocate a new SPI device from and ACPI Device node.
+ * The caller is responsible for calling spi_add_device to register the SPI device.
  *
- * If ctlr is set to NULL, the Controller for the spi device will be looked up
+ * If ctlr is set to NULL, the Controller for the SPI device will be looked up
  * using the resource.
  * If index is set to -1, index is not used.
  * Note: If index is -1, ctlr must be set.
@@ -2817,8 +2814,7 @@ static ssize_t slave_show(struct device *dev, struct device_attribute *attr,
 	struct device *child;
 
 	child = device_find_any_child(&ctlr->dev);
-	return sprintf(buf, "%s\n",
-		       child ? to_spi_device(child)->modalias : NULL);
+	return sysfs_emit(buf, "%s\n", child ? to_spi_device(child)->modalias : NULL);
 }
 
 static ssize_t slave_store(struct device *dev, struct device_attribute *attr,
@@ -3056,7 +3052,7 @@ static int spi_get_gpio_descs(struct spi_controller *ctlr)
 
 	ctlr->unused_native_cs = ffs(~native_cs_mask) - 1;
 
-	if ((ctlr->flags & SPI_MASTER_GPIO_SS) && num_cs_gpios &&
+	if ((ctlr->flags & SPI_CONTROLLER_GPIO_SS) && num_cs_gpios &&
 	    ctlr->max_native_cs && ctlr->unused_native_cs >= ctlr->max_native_cs) {
 		dev_err(dev, "No unused native chip select available\n");
 		return -EINVAL;
@@ -3084,6 +3080,20 @@ static int spi_controller_check_ops(struct spi_controller *ctlr)
 	return 0;
 }
 
+/* Allocate dynamic bus number using Linux idr */
+static int spi_controller_id_alloc(struct spi_controller *ctlr, int start, int end)
+{
+	int id;
+
+	mutex_lock(&board_lock);
+	id = idr_alloc(&spi_master_idr, ctlr, start, end, GFP_KERNEL);
+	mutex_unlock(&board_lock);
+	if (WARN(id < 0, "couldn't get idr"))
+		return id == -ENOSPC ? -EBUSY : id;
+	ctlr->bus_num = id;
+	return 0;
+}
+
 /**
  * spi_register_controller - register SPI master or slave controller
  * @ctlr: initialized master, originally from spi_alloc_master() or
@@ -3111,8 +3121,8 @@ int spi_register_controller(struct spi_controller *ctlr)
 {
 	struct device		*dev = ctlr->dev.parent;
 	struct boardinfo	*bi;
+	int			first_dynamic;
 	int			status;
-	int			id, first_dynamic;
 
 	if (!dev)
 		return -ENODEV;
@@ -3125,27 +3135,13 @@ int spi_register_controller(struct spi_controller *ctlr)
 	if (status)
 		return status;
 
+	if (ctlr->bus_num < 0)
+		ctlr->bus_num = of_alias_get_id(ctlr->dev.of_node, "spi");
 	if (ctlr->bus_num >= 0) {
 		/* Devices with a fixed bus num must check-in with the num */
-		mutex_lock(&board_lock);
-		id = idr_alloc(&spi_master_idr, ctlr, ctlr->bus_num,
-			ctlr->bus_num + 1, GFP_KERNEL);
-		mutex_unlock(&board_lock);
-		if (WARN(id < 0, "couldn't get idr"))
-			return id == -ENOSPC ? -EBUSY : id;
-		ctlr->bus_num = id;
-	} else if (ctlr->dev.of_node) {
-		/* Allocate dynamic bus number using Linux idr */
-		id = of_alias_get_id(ctlr->dev.of_node, "spi");
-		if (id >= 0) {
-			ctlr->bus_num = id;
-			mutex_lock(&board_lock);
-			id = idr_alloc(&spi_master_idr, ctlr, ctlr->bus_num,
-				       ctlr->bus_num + 1, GFP_KERNEL);
-			mutex_unlock(&board_lock);
-			if (WARN(id < 0, "couldn't get idr"))
-				return id == -ENOSPC ? -EBUSY : id;
-		}
+		status = spi_controller_id_alloc(ctlr, ctlr->bus_num, ctlr->bus_num + 1);
+		if (status)
+			return status;
 	}
 	if (ctlr->bus_num < 0) {
 		first_dynamic = of_alias_get_highest_id("spi");
@@ -3154,13 +3150,9 @@ int spi_register_controller(struct spi_controller *ctlr)
 		else
 			first_dynamic++;
 
-		mutex_lock(&board_lock);
-		id = idr_alloc(&spi_master_idr, ctlr, first_dynamic,
-			       0, GFP_KERNEL);
-		mutex_unlock(&board_lock);
-		if (WARN(id < 0, "couldn't get idr"))
-			return id;
-		ctlr->bus_num = id;
+		status = spi_controller_id_alloc(ctlr, first_dynamic, 0);
+		if (status)
+			return status;
 	}
 	ctlr->bus_lock_flag = 0;
 	init_completion(&ctlr->xfer_completion);
@@ -3339,7 +3331,8 @@ void spi_unregister_controller(struct spi_controller *ctlr)
 	if (IS_ENABLED(CONFIG_SPI_DYNAMIC))
 		mutex_unlock(&ctlr->add_lock);
 
-	/* Release the last reference on the controller if its driver
+	/*
+	 * Release the last reference on the controller if its driver
 	 * has not yet been converted to devm_spi_alloc_master/slave().
 	 */
 	if (!ctlr->devm_allocated)
@@ -3552,7 +3545,7 @@ static int __spi_split_transfer_maxsize(struct spi_controller *ctlr,
 
 	/* All the others need rx_buf/tx_buf also set */
 	for (i = 1, offset = maxsize; i < count; offset += maxsize, i++) {
-		/* Update rx_buf, tx_buf and dma */
+		/* Update rx_buf, tx_buf and DMA */
 		if (xfers[i].rx_buf)
 			xfers[i].rx_buf += offset;
 		if (xfers[i].rx_dma)
@@ -3622,7 +3615,7 @@ EXPORT_SYMBOL_GPL(spi_split_transfers_maxsize);
 
 
 /**
- * spi_split_transfers_maxwords - split spi transfers into multiple transfers
+ * spi_split_transfers_maxwords - split SPI transfers into multiple transfers
  *                                when an individual transfer exceeds a
  *                                certain number of SPI words
  * @ctlr:     the @spi_controller for this transfer
@@ -3650,13 +3643,7 @@ int spi_split_transfers_maxwords(struct spi_controller *ctlr,
 		size_t maxsize;
 		int ret;
 
-		if (xfer->bits_per_word <= 8)
-			maxsize = maxwords;
-		else if (xfer->bits_per_word <= 16)
-			maxsize = 2 * maxwords;
-		else
-			maxsize = 4 * maxwords;
-
+		maxsize = maxwords * roundup_pow_of_two(BITS_TO_BYTES(xfer->bits_per_word));
 		if (xfer->len > maxsize) {
 			ret = __spi_split_transfer_maxsize(ctlr, msg, &xfer,
 							   maxsize, gfp);
@@ -3671,7 +3658,8 @@ EXPORT_SYMBOL_GPL(spi_split_transfers_maxwords);
 
 /*-------------------------------------------------------------------------*/
 
-/* Core methods for SPI controller protocol drivers.  Some of the
+/*
+ * Core methods for SPI controller protocol drivers. Some of the
  * other core methods are currently defined as inline functions.
  */
 
@@ -3731,7 +3719,7 @@ static int spi_set_cs_timing(struct spi_device *spi)
  * changes those settings, and must be called from a context that can sleep.
  * Except for SPI_CS_HIGH, which takes effect immediately, the changes take
  * effect the next time the device is selected and data is transferred to
- * or from it.  When this function returns, the spi device is deselected.
+ * or from it.  When this function returns, the SPI device is deselected.
  *
  * Note that this call will fail if the protocol driver specifies an option
  * that the underlying controller or its driver does not support.  For
@@ -4071,7 +4059,7 @@ static int __spi_async(struct spi_device *spi, struct spi_message *message)
  * spi_async - asynchronous SPI transfer
  * @spi: device with which data will be exchanged
  * @message: describes the data transfers, including completion callback
- * Context: any (irqs may be blocked, etc)
+ * Context: any (IRQs may be blocked, etc)
  *
  * This call may be used in_irq and other contexts which can't sleep,
  * as well as from task contexts which can sleep.
@@ -4125,7 +4113,7 @@ EXPORT_SYMBOL_GPL(spi_async);
  * spi_async_locked - version of spi_async with exclusive bus usage
  * @spi: device with which data will be exchanged
  * @message: describes the data transfers, including completion callback
- * Context: any (irqs may be blocked, etc)
+ * Context: any (IRQs may be blocked, etc)
  *
  * This call may be used in_irq and other contexts which can't sleep,
  * as well as from task contexts which can sleep.
@@ -4388,9 +4376,9 @@ static u8	*buf;
 /**
  * spi_write_then_read - SPI synchronous write followed by read
  * @spi: device with which data will be exchanged
- * @txbuf: data to be written (need not be dma-safe)
+ * @txbuf: data to be written (need not be DMA-safe)
  * @n_tx: size of txbuf, in bytes
- * @rxbuf: buffer into which data will be read (need not be dma-safe)
+ * @rxbuf: buffer into which data will be read (need not be DMA-safe)
  * @n_rx: size of rxbuf, in bytes
  * Context: can sleep
  *
@@ -4401,7 +4389,7 @@ static u8	*buf;
  *
  * Parameters to this routine are always copied using a small buffer.
  * Performance-sensitive or bulk transfer code should instead use
- * spi_{async,sync}() calls with dma-safe buffers.
+ * spi_{async,sync}() calls with DMA-safe buffers.
  *
  * Return: zero on success, else a negative error code.
  */
@@ -4446,7 +4434,7 @@ int spi_write_then_read(struct spi_device *spi,
 	x[0].tx_buf = local_buf;
 	x[1].rx_buf = local_buf + n_tx;
 
-	/* Do the i/o */
+	/* Do the I/O */
 	status = spi_sync(spi, &message);
 	if (status == 0)
 		memcpy(rxbuf, x[1].rx_buf, n_rx);
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 32c94eae8926..04daf61dfd3f 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -6,18 +6,18 @@
 #ifndef __LINUX_SPI_H
 #define __LINUX_SPI_H
 
+#include <linux/acpi.h>
 #include <linux/bits.h>
+#include <linux/completion.h>
 #include <linux/device.h>
-#include <linux/mod_devicetable.h>
-#include <linux/slab.h>
+#include <linux/gpio/consumer.h>
 #include <linux/kthread.h>
-#include <linux/completion.h>
+#include <linux/mod_devicetable.h>
 #include <linux/scatterlist.h>
-#include <linux/gpio/consumer.h>
+#include <linux/slab.h>
+#include <linux/u64_stats_sync.h>
 
 #include <uapi/linux/spi/spi.h>
-#include <linux/acpi.h>
-#include <linux/u64_stats_sync.h>
 
 struct dma_chan;
 struct software_node;
@@ -36,7 +36,7 @@ extern struct bus_type spi_bus_type;
 
 /**
  * struct spi_statistics - statistics for spi transfers
- * @syncp:         seqcount to protect members in this struct for per-cpu udate
+ * @syncp:         seqcount to protect members in this struct for per-cpu update
  *                 on 32-bit systems
  *
  * @messages:      number of spi-messages handled
@@ -55,7 +55,7 @@ extern struct bus_type spi_bus_type;
  * @bytes_rx:      number of bytes received from device
  *
  * @transfer_bytes_histo:
- *                 transfer bytes histogramm
+ *                 transfer bytes histogram
  *
  * @transfers_split_maxsize:
  *                 number of transfers that have been split because of
@@ -156,7 +156,7 @@ extern void spi_transfer_cs_change_delay_exec(struct spi_message *msg,
  *	the device will bind to the named driver and only the named driver.
  *	Do not set directly, because core frees it; use driver_set_override() to
  *	set or clear it.
- * @cs_gpiod: gpio descriptor of the chipselect line (optional, NULL when
+ * @cs_gpiod: GPIO descriptor of the chipselect line (optional, NULL when
  *	not using a GPIO line)
  * @word_delay: delay to be inserted between consecutive
  *	words of a transfer
@@ -212,7 +212,7 @@ struct spi_device {
 	void			*controller_data;
 	char			modalias[SPI_NAME_SIZE];
 	const char		*driver_override;
-	struct gpio_desc	*cs_gpiod;	/* Chip select gpio desc */
+	struct gpio_desc	*cs_gpiod;	/* Chip select GPIO descriptor */
 	struct spi_delay	word_delay; /* Inter-word delay */
 	/* CS delays */
 	struct spi_delay	cs_setup;
@@ -223,7 +223,7 @@ struct spi_device {
 	struct spi_statistics __percpu	*pcpu_statistics;
 
 	/*
-	 * likely need more hooks for more protocol options affecting how
+	 * Likely need more hooks for more protocol options affecting how
 	 * the controller talks to each chip, like:
 	 *  - memory packing (12 bit samples into low bits, others zeroed)
 	 *  - priority
@@ -299,11 +299,11 @@ static inline void spi_set_csgpiod(struct spi_device *spi, u8 idx, struct gpio_d
 /**
  * struct spi_driver - Host side "protocol" driver
  * @id_table: List of SPI devices supported by this driver
- * @probe: Binds this driver to the spi device.  Drivers can verify
+ * @probe: Binds this driver to the SPI device.  Drivers can verify
  *	that the device is actually present, and may need to configure
  *	characteristics (such as bits_per_word) which weren't needed for
  *	the initial configuration done during system setup.
- * @remove: Unbinds this driver from the spi device
+ * @remove: Unbinds this driver from the SPI device
  * @shutdown: Standard shutdown callback used during system state
  *	transitions such as powerdown/halt and kexec
  * @driver: SPI device drivers should initialize the name and owner
@@ -415,7 +415,7 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch
  * @queued: whether this controller is providing an internal message queue
  * @kworker: pointer to thread struct for message pump
  * @pump_messages: work struct for scheduling work to the message pump
- * @queue_lock: spinlock to syncronise access to message queue
+ * @queue_lock: spinlock to synchronise access to message queue
  * @queue: message queue
  * @cur_msg: the currently in-flight message
  * @cur_msg_completion: a completion for the current in-flight message
@@ -473,7 +473,7 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch
  * @unprepare_message: undo any work done by prepare_message().
  * @slave_abort: abort the ongoing transfer request on an SPI slave controller
  * @target_abort: abort the ongoing transfer request on an SPI target controller
- * @cs_gpiods: Array of GPIO descs to use as chip select lines; one per CS
+ * @cs_gpiods: Array of GPIO descriptors to use as chip select lines; one per CS
  *	number. Any individual value may be NULL for CS lines that
  *	are not GPIOs (driven by the SPI controller itself).
  * @use_gpio_descriptors: Turns on the code in the SPI core to parse and grab
@@ -500,7 +500,7 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch
  *	If the driver does not set this, the SPI core takes the snapshot as
  *	close to the driver hand-over as possible.
  * @irq_flags: Interrupt enable state during PTP system timestamping
- * @fallback: fallback to pio if dma transfer return failure with
+ * @fallback: fallback to PIO if DMA transfer return failure with
  *	SPI_TRANS_FAIL_NO_START.
  * @queue_empty: signal green light for opportunistically skipping the queue
  *	for spi_sync transfers.
@@ -522,15 +522,17 @@ struct spi_controller {
 
 	struct list_head list;
 
-	/* Other than negative (== assign one dynamically), bus_num is fully
-	 * board-specific.  usually that simplifies to being SOC-specific.
-	 * example:  one SOC has three SPI controllers, numbered 0..2,
-	 * and one board's schematics might show it using SPI-2.  software
+	/*
+	 * Other than negative (== assign one dynamically), bus_num is fully
+	 * board-specific. Usually that simplifies to being SoC-specific.
+	 * example: one SoC has three SPI controllers, numbered 0..2,
+	 * and one board's schematics might show it using SPI-2. Software
 	 * would normally use bus_num=2 for that controller.
 	 */
 	s16			bus_num;
 
-	/* chipselects will be integral to many controllers; some others
+	/*
+	 * Chipselects will be integral to many controllers; some others
 	 * might use board-specific GPIOs.
 	 */
 	u16			num_chipselect;
@@ -562,8 +564,7 @@ struct spi_controller {
 #define SPI_CONTROLLER_NO_TX		BIT(2)	/* Can't do buffer write */
 #define SPI_CONTROLLER_MUST_RX		BIT(3)	/* Requires rx */
 #define SPI_CONTROLLER_MUST_TX		BIT(4)	/* Requires tx */
-
-#define SPI_MASTER_GPIO_SS		BIT(5)	/* GPIO CS must select slave */
+#define SPI_CONTROLLER_GPIO_SS		BIT(5)	/* GPIO CS must select slave */
 
 	/* Flag indicating if the allocation of this struct is devres-managed */
 	bool			devm_allocated;
@@ -576,8 +577,8 @@ struct spi_controller {
 	};
 
 	/*
-	 * on some hardware transfer / message size may be constrained
-	 * the limit may depend on device transfer settings
+	 * On some hardware transfer / message size may be constrained
+	 * the limit may depend on device transfer settings.
 	 */
 	size_t (*max_transfer_size)(struct spi_device *spi);
 	size_t (*max_message_size)(struct spi_device *spi);
@@ -595,7 +596,8 @@ struct spi_controller {
 	/* Flag indicating that the SPI bus is locked for exclusive use */
 	bool			bus_lock_flag;
 
-	/* Setup mode and clock, etc (spi driver may call many times).
+	/*
+	 * Setup mode and clock, etc (SPI driver may call many times).
 	 *
 	 * IMPORTANT:  this may be called when transfers to another
 	 * device are active.  DO NOT UPDATE SHARED REGISTERS in ways
@@ -613,18 +615,19 @@ struct spi_controller {
 	 */
 	int (*set_cs_timing)(struct spi_device *spi);
 
-	/* Bidirectional bulk transfers
+	/*
+	 * Bidirectional bulk transfers
 	 *
 	 * + The transfer() method may not sleep; its main role is
 	 *   just to add the message to the queue.
 	 * + For now there's no remove-from-queue operation, or
 	 *   any other request management
-	 * + To a given spi_device, message queueing is pure fifo
+	 * + To a given spi_device, message queueing is pure FIFO
 	 *
 	 * + The controller's main job is to process its message queue,
 	 *   selecting a chip (for masters), then transferring data
 	 * + If there are multiple spi_device children, the i/o queue
-	 *   arbitration algorithm is unspecified (round robin, fifo,
+	 *   arbitration algorithm is unspecified (round robin, FIFO,
 	 *   priority, reservations, preemption, etc)
 	 *
 	 * + Chipselect stays active during the entire message
@@ -705,7 +708,7 @@ struct spi_controller {
 	const struct spi_controller_mem_ops *mem_ops;
 	const struct spi_controller_mem_caps *mem_caps;
 
-	/* gpio chip select */
+	/* GPIO chip select */
 	struct gpio_desc	**cs_gpiods;
 	bool			use_gpio_descriptors;
 	s8			unused_native_cs;
@@ -789,7 +792,7 @@ void spi_take_timestamp_post(struct spi_controller *ctlr,
 			     struct spi_transfer *xfer,
 			     size_t progress, bool irqs_off);
 
-/* The spi driver core manages memory for the spi_controller classdev */
+/* The SPI driver core manages memory for the spi_controller classdev */
 extern struct spi_controller *__spi_alloc_controller(struct device *host,
 						unsigned int size, bool slave);
 
@@ -878,13 +881,13 @@ typedef void (*spi_res_release_t)(struct spi_controller *ctlr,
 				  void *res);
 
 /**
- * struct spi_res - spi resource management structure
+ * struct spi_res - SPI resource management structure
  * @entry:   list entry
  * @release: release code called prior to freeing this resource
  * @data:    extra data allocated for the specific use-case
  *
- * this is based on ideas from devres, but focused on life-cycle
- * management during spi_message processing
+ * This is based on ideas from devres, but focused on life-cycle
+ * management during spi_message processing.
  */
 struct spi_res {
 	struct list_head        entry;
@@ -902,7 +905,7 @@ struct spi_res {
  *
  * The spi_messages themselves consist of a series of read+write transfer
  * segments.  Those segments always read the same number of bits as they
- * write; but one or the other is easily ignored by passing a null buffer
+ * write; but one or the other is easily ignored by passing a NULL buffer
  * pointer.  (This is unlike most types of I/O API, because SPI hardware
  * is full duplex.)
  *
@@ -913,8 +916,8 @@ struct spi_res {
 
 /**
  * struct spi_transfer - a read/write buffer pair
- * @tx_buf: data to be written (dma-safe memory), or NULL
- * @rx_buf: data to be read (dma-safe memory), or NULL
+ * @tx_buf: data to be written (DMA-safe memory), or NULL
+ * @rx_buf: data to be read (DMA-safe memory), or NULL
  * @tx_dma: DMA address of tx_buf, if @spi_message.is_dma_mapped
  * @rx_dma: DMA address of rx_buf, if @spi_message.is_dma_mapped
  * @tx_nbits: number of bits used for writing. If 0 the default
@@ -937,7 +940,7 @@ struct spi_res {
  * @word_delay: inter word delay to be introduced after each word size
  *	(set by bits_per_word) transmission.
  * @effective_speed_hz: the effective SCK-speed that was used to
- *      transfer this transfer. Set to 0 if the spi bus driver does
+ *      transfer this transfer. Set to 0 if the SPI bus driver does
  *      not support it.
  * @transfer_list: transfers are sequenced through @spi_message.transfers
  * @tx_sg: Scatterlist for transmit, currently not for client use
@@ -966,16 +969,16 @@ struct spi_res {
  *	transmitting the "pre" word, and the "post" timestamp after receiving
  *	transmit confirmation from the controller for the "post" word.
  * @timestamped: true if the transfer has been timestamped
- * @error: Error status logged by spi controller driver.
+ * @error: Error status logged by SPI controller driver.
  *
  * SPI transfers always write the same number of bytes as they read.
  * Protocol drivers should always provide @rx_buf and/or @tx_buf.
  * In some cases, they may also want to provide DMA addresses for
  * the data being transferred; that may reduce overhead, when the
- * underlying driver uses dma.
+ * underlying driver uses DMA.
  *
- * If the transmit buffer is null, zeroes will be shifted out
- * while filling @rx_buf.  If the receive buffer is null, the data
+ * If the transmit buffer is NULL, zeroes will be shifted out
+ * while filling @rx_buf.  If the receive buffer is NULL, the data
  * shifted in will be discarded.  Only "len" bytes shift out (or in).
  * It's an error to try to shift out a partial word.  (For example, by
  * shifting out three bytes with word size of sixteen or twenty bits;
@@ -1009,7 +1012,7 @@ struct spi_res {
  * Some devices need protocol transactions to be built from a series of
  * spi_message submissions, where the content of one message is determined
  * by the results of previous messages and where the whole transaction
- * ends when the chipselect goes intactive.
+ * ends when the chipselect goes inactive.
  *
  * When SPI can transfer in 1x,2x or 4x. It can get this transfer information
  * from device through @tx_nbits and @rx_nbits. In Bi-direction, these
@@ -1023,10 +1026,11 @@ struct spi_res {
  * and its transfers, ignore them until its completion callback.
  */
 struct spi_transfer {
-	/* It's ok if tx_buf == rx_buf (right?)
-	 * for MicroWire, one buffer must be null
-	 * buffers must work with dma_*map_single() calls, unless
-	 *   spi_message.is_dma_mapped reports a pre-existing mapping
+	/*
+	 * It's okay if tx_buf == rx_buf (right?).
+	 * For MicroWire, one buffer must be NULL.
+	 * Buffers must work with dma_*map_single() calls, unless
+	 * spi_message.is_dma_mapped reports a pre-existing mapping.
 	 */
 	const void	*tx_buf;
 	void		*rx_buf;
@@ -1046,9 +1050,9 @@ struct spi_transfer {
 	unsigned	tx_nbits:3;
 	unsigned	rx_nbits:3;
 	unsigned	timestamped:1;
-#define	SPI_NBITS_SINGLE	0x01 /* 1bit transfer */
-#define	SPI_NBITS_DUAL		0x02 /* 2bits transfer */
-#define	SPI_NBITS_QUAD		0x04 /* 4bits transfer */
+#define	SPI_NBITS_SINGLE	0x01 /* 1-bit transfer */
+#define	SPI_NBITS_DUAL		0x02 /* 2-bit transfer */
+#define	SPI_NBITS_QUAD		0x04 /* 4-bit transfer */
 	u8		bits_per_word;
 	struct spi_delay	delay;
 	struct spi_delay	cs_change_delay;
@@ -1069,7 +1073,7 @@ struct spi_transfer {
  * struct spi_message - one multi-segment SPI transaction
  * @transfers: list of transfer segments in this transaction
  * @spi: SPI device to which the transaction is queued
- * @is_dma_mapped: if true, the caller provided both dma and cpu virtual
+ * @is_dma_mapped: if true, the caller provided both DMA and CPU virtual
  *	addresses for each transfer buffer
  * @complete: called to report transaction completions
  * @context: the argument to complete() when it's called
@@ -1079,7 +1083,7 @@ struct spi_transfer {
  * @status: zero for success, else negative errno
  * @queue: for use by whichever driver currently owns the message
  * @state: for use by whichever driver currently owns the message
- * @resources: for resource management when the spi message is processed
+ * @resources: for resource management when the SPI message is processed
  * @prepared: spi_prepare_message was called for the this message
  *
  * A @spi_message is used to execute an atomic sequence of data transfers,
@@ -1106,7 +1110,8 @@ struct spi_message {
 	/* spi_prepare_message() was called for this message */
 	bool			prepared;
 
-	/* REVISIT:  we might want a flag affecting the behavior of the
+	/*
+	 * REVISIT: we might want a flag affecting the behavior of the
 	 * last transfer ... allowing things like "read 16 bit length L"
 	 * immediately followed by "read L bytes".  Basically imposing
 	 * a specific message scheduling algorithm.
@@ -1124,14 +1129,15 @@ struct spi_message {
 	unsigned		frame_length;
 	unsigned		actual_length;
 
-	/* For optional use by whatever driver currently owns the
+	/*
+	 * For optional use by whatever driver currently owns the
 	 * spi_message ...  between calls to spi_async and then later
 	 * complete(), that's the spi_controller controller driver.
 	 */
 	struct list_head	queue;
 	void			*state;
 
-	/* List of spi_res reources when the spi message is processed */
+	/* List of spi_res resources when the SPI message is processed */
 	struct list_head        resources;
 };
 
@@ -1168,7 +1174,7 @@ spi_transfer_delay_exec(struct spi_transfer *t)
 /**
  * spi_message_init_with_transfers - Initialize spi_message and append transfers
  * @m: spi_message to be initialized
- * @xfers: An array of spi transfers
+ * @xfers: An array of SPI transfers
  * @num_xfers: Number of items in the xfer array
  *
  * This function initializes the given spi_message and adds each spi_transfer in
@@ -1185,10 +1191,10 @@ struct spi_transfer *xfers, unsigned int num_xfers)
 		spi_message_add_tail(&xfers[i], m);
 }
 
-/* It's fine to embed message and transaction structures in other data
+/*
+ * It's fine to embed message and transaction structures in other data
  * structures so long as you don't free them while they're in use.
  */
-
 static inline struct spi_message *spi_message_alloc(unsigned ntrans, gfp_t flags)
 {
 	struct spi_message *m;
@@ -1291,7 +1297,7 @@ typedef void (*spi_replaced_release_t)(struct spi_controller *ctlr,
  *                                 replacements that have occurred
  *                                 so that they can get reverted
  * @release:            some extra release code to get executed prior to
- *                      relasing this structure
+ *                      releasing this structure
  * @extradata:          pointer to some extra data if requested or NULL
  * @replaced_transfers: transfers that have been replaced and which need
  *                      to get restored
@@ -1301,9 +1307,9 @@ typedef void (*spi_replaced_release_t)(struct spi_controller *ctlr,
  * @inserted_transfers: array of spi_transfers of array-size @inserted,
  *                      that have been replacing replaced_transfers
  *
- * note: that @extradata will point to @inserted_transfers[@inserted]
+ * Note: that @extradata will point to @inserted_transfers[@inserted]
  * if some extra allocation is requested, so alignment will be the same
- * as for spi_transfers
+ * as for spi_transfers.
  */
 struct spi_replaced_transfers {
 	spi_replaced_release_t release;
@@ -1329,7 +1335,8 @@ extern int spi_split_transfers_maxwords(struct spi_controller *ctlr,
 
 /*---------------------------------------------------------------------------*/
 
-/* All these synchronous SPI transfer routines are utilities layered
+/*
+ * All these synchronous SPI transfer routines are utilities layered
  * over the core async transfer primitive.  Here, "synchronous" means
  * they will sleep uninterruptibly until the async transfer completes.
  */
@@ -1472,7 +1479,7 @@ static inline ssize_t spi_w8r16(struct spi_device *spi, u8 cmd)
  *
  * Callable only from contexts that can sleep.
  *
- * Return: the (unsigned) sixteen bit number returned by the device in cpu
+ * Return: the (unsigned) sixteen bit number returned by the device in CPU
  * endianness, or else a negative error code.
  */
 static inline ssize_t spi_w8r16be(struct spi_device *spi, u8 cmd)
@@ -1500,7 +1507,7 @@ static inline ssize_t spi_w8r16be(struct spi_device *spi, u8 cmd)
  * As a rule, SPI devices can't be probed.  Instead, board init code
  * provides a table listing the devices which are present, with enough
  * information to bind and set up the device's driver.  There's basic
- * support for nonstatic configurations too; enough to handle adding
+ * support for non-static configurations too; enough to handle adding
  * parport adapters, or microcontrollers acting as USB-to-SPI bridges.
  */
 
@@ -1537,12 +1544,13 @@ static inline ssize_t spi_w8r16be(struct spi_device *spi, u8 cmd)
  * are active in some dynamic board configuration models.
  */
 struct spi_board_info {
-	/* The device name and module name are coupled, like platform_bus;
+	/*
+	 * The device name and module name are coupled, like platform_bus;
 	 * "modalias" is normally the driver name.
 	 *
 	 * platform_data goes to spi_device.dev.platform_data,
 	 * controller_data goes to spi_device.controller_data,
-	 * irq is copied too
+	 * IRQ is copied too.
 	 */
 	char		modalias[SPI_NAME_SIZE];
 	const void	*platform_data;
@@ -1554,7 +1562,8 @@ struct spi_board_info {
 	u32		max_speed_hz;
 
 
-	/* bus_num is board specific and matches the bus_num of some
+	/*
+	 * bus_num is board specific and matches the bus_num of some
 	 * spi_controller that will probably be registered later.
 	 *
 	 * chip_select reflects how this chip is wired to that master;
@@ -1563,12 +1572,14 @@ struct spi_board_info {
 	u16		bus_num;
 	u16		chip_select;
 
-	/* mode becomes spi_device.mode, and is essential for chips
+	/*
+	 * mode becomes spi_device.mode, and is essential for chips
 	 * where the default of SPI_CS_HIGH = 0 is wrong.
 	 */
 	u32		mode;
 
-	/* ... may need additional spi_device chip config data here.
+	/*
+	 * ... may need additional spi_device chip config data here.
 	 * avoid stuff protocol drivers can set; but include stuff
 	 * needed to behave without being bound to a driver:
 	 *  - quirks like clock rate mattering when not selected
@@ -1585,7 +1596,8 @@ spi_register_board_info(struct spi_board_info const *info, unsigned n)
 	{ return 0; }
 #endif
 
-/* If you're hotplugging an adapter with devices (parport, usb, etc)
+/*
+ * If you're hotplugging an adapter with devices (parport, USB, etc)
  * use spi_new_device() to describe each device.  You can also call
  * spi_unregister_device() to start making that device vanish, but
  * normally that would be handled by spi_unregister_controller().
@@ -1623,10 +1635,6 @@ spi_transfer_is_last(struct spi_controller *ctlr, struct spi_transfer *xfer)
 #define spi_master			spi_controller
 
 #define SPI_MASTER_HALF_DUPLEX		SPI_CONTROLLER_HALF_DUPLEX
-#define SPI_MASTER_NO_RX		SPI_CONTROLLER_NO_RX
-#define SPI_MASTER_NO_TX		SPI_CONTROLLER_NO_TX
-#define SPI_MASTER_MUST_RX		SPI_CONTROLLER_MUST_RX
-#define SPI_MASTER_MUST_TX		SPI_CONTROLLER_MUST_TX
 
 #define spi_master_get_devdata(_ctlr)	spi_controller_get_devdata(_ctlr)
 #define spi_master_set_devdata(_ctlr, _data)	\
diff --git a/include/trace/events/spi.h b/include/trace/events/spi.h
index c0248a8fa79c..e63d4a24d879 100644
--- a/include/trace/events/spi.h
+++ b/include/trace/events/spi.h
@@ -167,7 +167,7 @@ TRACE_EVENT(spi_message_done,
 );
 
 /*
- * consider a buffer valid if non-NULL and if it doesn't match the dummy buffer
+ * Consider a buffer valid if non-NULL and if it doesn't match the dummy buffer
  * that only exist to work with controllers that have SPI_CONTROLLER_MUST_TX or
  * SPI_CONTROLLER_MUST_RX.
  */