summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2011-01-18 08:05:20 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2011-01-18 08:05:20 -0800
commit6a7f6ec9512970874fa9fc883ea44d77d0f287c2 (patch)
tree2bce1665b5a9e81bdd95f6e34410bdf13c58350e
parentc6fa63c659b3dd121f21afe7529f505505e79b23 (diff)
parent4c65595ec506ff65c90b1d9fed17333005fa5eb5 (diff)
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (25 commits) m68knommu: fix broken setting of irq_chip and handler m68knommu: switch to using -mcpu= flags for ColdFire targets m68knommu: arch/m68knommu/Kconfig whitespace cleanup m68knommu: create optimal separate instruction and data cache for ColdFire m68knommu: support ColdFire caches that do copyback and write-through m68knommu: support version 2 ColdFire split cache m68knommu: make cache push code ColdFire generic m68knommu: clean up ColdFire cache control code m68knommu: move inclusion of ColdFire v4 cache registers m68knommu: merge bit definitions for version 3 ColdFire cache controller m68knommu: create bit definitions for the version 2 ColdFire cache controller m68knommu: remove empty __iounmap() it is no used m68knommu: remove kernel_map() code, it is not used m68knommu: remove do_page_fault(), it is not used m68knommu: use user stack pointer hardware on some ColdFire cores m68knommu: remove command line printing DEBUG m68knommu: remove fasthandler interrupt code m68knommu: move UART addressing to part specific includes m68knommu: fix clock rate value reported for ColdFire 54xx parts m68knommu: move ColdFire CPU names into their headers ...
-rw-r--r--arch/m68k/include/asm/cacheflush_no.h95
-rw-r--r--arch/m68k/include/asm/coldfire.h2
-rw-r--r--arch/m68k/include/asm/entry_no.h59
-rw-r--r--arch/m68k/include/asm/gpio.h2
-rw-r--r--arch/m68k/include/asm/io_no.h1
-rw-r--r--arch/m68k/include/asm/m5206sim.h14
-rw-r--r--arch/m68k/include/asm/m520xsim.h17
-rw-r--r--arch/m68k/include/asm/m523xsim.h11
-rw-r--r--arch/m68k/include/asm/m5249sim.h10
-rw-r--r--arch/m68k/include/asm/m5272sim.h8
-rw-r--r--arch/m68k/include/asm/m527xsim.h10
-rw-r--r--arch/m68k/include/asm/m528xsim.h11
-rw-r--r--arch/m68k/include/asm/m52xxacr.h94
-rw-r--r--arch/m68k/include/asm/m5307sim.h43
-rw-r--r--arch/m68k/include/asm/m532xsim.h33
-rw-r--r--arch/m68k/include/asm/m53xxacr.h101
-rw-r--r--arch/m68k/include/asm/m5407sim.h42
-rw-r--r--arch/m68k/include/asm/m54xxacr.h97
-rw-r--r--arch/m68k/include/asm/m54xxgpt.h (renamed from arch/m68k/include/asm/m548xgpt.h)10
-rw-r--r--arch/m68k/include/asm/m54xxsim.h (renamed from arch/m68k/include/asm/m548xsim.h)23
-rw-r--r--arch/m68k/include/asm/mcfcache.h150
-rw-r--r--arch/m68k/include/asm/mcfsim.h4
-rw-r--r--arch/m68k/include/asm/mcfuart.h45
-rw-r--r--arch/m68k/include/asm/processor.h13
-rw-r--r--arch/m68knommu/Kconfig98
-rw-r--r--arch/m68knommu/Makefile14
-rw-r--r--arch/m68knommu/kernel/setup.c72
-rw-r--r--arch/m68knommu/mm/Makefile2
-rw-r--r--arch/m68knommu/mm/fault.c57
-rw-r--r--arch/m68knommu/mm/kmap.c9
-rw-r--r--arch/m68knommu/mm/memory.c33
-rw-r--r--arch/m68knommu/platform/54xx/Makefile (renamed from arch/m68knommu/platform/548x/Makefile)0
-rw-r--r--arch/m68knommu/platform/54xx/config.c (renamed from arch/m68knommu/platform/548x/config.c)32
-rw-r--r--arch/m68knommu/platform/68328/ints.c4
-rw-r--r--arch/m68knommu/platform/coldfire/Makefile4
-rw-r--r--arch/m68knommu/platform/coldfire/cache.c48
-rw-r--r--arch/m68knommu/platform/coldfire/entry.S56
-rw-r--r--arch/m68knommu/platform/coldfire/head.S26
38 files changed, 727 insertions, 623 deletions
diff --git a/arch/m68k/include/asm/cacheflush_no.h b/arch/m68k/include/asm/cacheflush_no.h
index 7085bd51668b..cb88aa96c4f1 100644
--- a/arch/m68k/include/asm/cacheflush_no.h
+++ b/arch/m68k/include/asm/cacheflush_no.h
@@ -2,21 +2,22 @@
#define _M68KNOMMU_CACHEFLUSH_H
/*
- * (C) Copyright 2000-2004, Greg Ungerer <gerg@snapgear.com>
+ * (C) Copyright 2000-2010, Greg Ungerer <gerg@snapgear.com>
*/
#include <linux/mm.h>
+#include <asm/mcfsim.h>
#define flush_cache_all() __flush_cache_all()
#define flush_cache_mm(mm) do { } while (0)
#define flush_cache_dup_mm(mm) do { } while (0)
-#define flush_cache_range(vma, start, end) __flush_cache_all()
+#define flush_cache_range(vma, start, end) do { } while (0)
#define flush_cache_page(vma, vmaddr) do { } while (0)
-#define flush_dcache_range(start,len) __flush_cache_all()
+#define flush_dcache_range(start, len) __flush_dcache_all()
#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
#define flush_dcache_page(page) do { } while (0)
#define flush_dcache_mmap_lock(mapping) do { } while (0)
#define flush_dcache_mmap_unlock(mapping) do { } while (0)
-#define flush_icache_range(start,len) __flush_cache_all()
+#define flush_icache_range(start, len) __flush_icache_all()
#define flush_icache_page(vma,pg) do { } while (0)
#define flush_icache_user_range(vma,pg,adr,len) do { } while (0)
#define flush_cache_vmap(start, end) do { } while (0)
@@ -27,66 +28,52 @@
#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
memcpy(dst, src, len)
+void mcf_cache_push(void);
+
static inline void __flush_cache_all(void)
{
-#if defined(CONFIG_M5407) || defined(CONFIG_M548x)
- /*
- * Use cpushl to push and invalidate all cache lines.
- * Gas doesn't seem to know how to generate the ColdFire
- * cpushl instruction... Oh well, bit stuff it for now.
- */
- __asm__ __volatile__ (
- "nop\n\t"
- "clrl %%d0\n\t"
- "1:\n\t"
- "movel %%d0,%%a0\n\t"
- "2:\n\t"
- ".word 0xf468\n\t"
- "addl #0x10,%%a0\n\t"
- "cmpl #0x00000800,%%a0\n\t"
- "blt 2b\n\t"
- "addql #1,%%d0\n\t"
- "cmpil #4,%%d0\n\t"
- "bne 1b\n\t"
- "movel #0xb6088500,%%d0\n\t"
- "movec %%d0,%%CACR\n\t"
- : : : "d0", "a0" );
-#endif /* CONFIG_M5407 */
-#if defined(CONFIG_M523x) || defined(CONFIG_M527x)
- __asm__ __volatile__ (
- "movel #0x81400100, %%d0\n\t"
- "movec %%d0, %%CACR\n\t"
- "nop\n\t"
- : : : "d0" );
-#endif /* CONFIG_M523x || CONFIG_M527x */
-#if defined(CONFIG_M528x)
- __asm__ __volatile__ (
- "movel #0x81000200, %%d0\n\t"
- "movec %%d0, %%CACR\n\t"
- "nop\n\t"
- : : : "d0" );
-#endif /* CONFIG_M528x */
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272)
+#ifdef CACHE_PUSH
+ mcf_cache_push();
+#endif
+#ifdef CACHE_INVALIDATE
__asm__ __volatile__ (
- "movel #0x81000100, %%d0\n\t"
+ "movel %0, %%d0\n\t"
"movec %%d0, %%CACR\n\t"
"nop\n\t"
- : : : "d0" );
-#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */
-#ifdef CONFIG_M5249
+ : : "i" (CACHE_INVALIDATE) : "d0" );
+#endif
+}
+
+/*
+ * Some ColdFire parts implement separate instruction and data caches,
+ * on those we should just flush the appropriate cache. If we don't need
+ * to do any specific flushing then this will be optimized away.
+ */
+static inline void __flush_icache_all(void)
+{
+#ifdef CACHE_INVALIDATEI
__asm__ __volatile__ (
- "movel #0xa1000200, %%d0\n\t"
+ "movel %0, %%d0\n\t"
"movec %%d0, %%CACR\n\t"
"nop\n\t"
- : : : "d0" );
-#endif /* CONFIG_M5249 */
-#ifdef CONFIG_M532x
+ : : "i" (CACHE_INVALIDATEI) : "d0" );
+#endif
+}
+
+static inline void __flush_dcache_all(void)
+{
+#ifdef CACHE_PUSH
+ mcf_cache_push();
+#endif
+#ifdef CACHE_INVALIDATED
__asm__ __volatile__ (
- "movel #0x81000200, %%d0\n\t"
+ "movel %0, %%d0\n\t"
"movec %%d0, %%CACR\n\t"
"nop\n\t"
- : : : "d0" );
-#endif /* CONFIG_M532x */
+ : : "i" (CACHE_INVALIDATED) : "d0" );
+#else
+ /* Flush the wrtite buffer */
+ __asm__ __volatile__ ( "nop" );
+#endif
}
-
#endif /* _M68KNOMMU_CACHEFLUSH_H */
diff --git a/arch/m68k/include/asm/coldfire.h b/arch/m68k/include/asm/coldfire.h
index 3b0a34d0fe33..213028cbe110 100644
--- a/arch/m68k/include/asm/coldfire.h
+++ b/arch/m68k/include/asm/coldfire.h
@@ -32,7 +32,7 @@
*/
#define MCF_MBAR 0x10000000
#define MCF_MBAR2 0x80000000
-#if defined(CONFIG_M548x)
+#if defined(CONFIG_M54xx)
#define MCF_IPSBAR MCF_MBAR
#elif defined(CONFIG_M520x)
#define MCF_IPSBAR 0xFC000000
diff --git a/arch/m68k/include/asm/entry_no.h b/arch/m68k/include/asm/entry_no.h
index 26be277394f9..627d69bacc58 100644
--- a/arch/m68k/include/asm/entry_no.h
+++ b/arch/m68k/include/asm/entry_no.h
@@ -42,12 +42,16 @@
*/
#ifdef CONFIG_COLDFIRE
+#ifdef CONFIG_COLDFIRE_SW_A7
/*
- * This is made a little more tricky on the ColdFire. There is no
- * separate kernel and user stack pointers. Need to artificially
+ * This is made a little more tricky on older ColdFires. There is no
+ * separate supervisor and user stack pointers. Need to artificially
* construct a usp in software... When doing this we need to disable
- * interrupts, otherwise bad things could happen.
+ * interrupts, otherwise bad things will happen.
*/
+.globl sw_usp
+.globl sw_ksp
+
.macro SAVE_ALL
move #0x2700,%sr /* disable intrs */
btst #5,%sp@(2) /* from user? */
@@ -74,9 +78,7 @@
7:
.endm
-.macro RESTORE_ALL
- btst #5,%sp@(PT_SR) /* going user? */
- bnes 8f /* no, skip */
+.macro RESTORE_USER
move #0x2700,%sr /* disable intrs */
movel sw_usp,%a0 /* get usp */
movel %sp@(PT_OFF_PC),%a0@- /* copy exception program counter */
@@ -91,19 +93,22 @@
subql #8,sw_usp /* set exception */
movel sw_usp,%sp /* restore usp */
rte
- 8:
- moveml %sp@,%d1-%d5/%a0-%a2
- lea %sp@(32),%sp /* space for 8 regs */
- movel %sp@+,%d0
- addql #4,%sp /* orig d0 */
- addl %sp@+,%sp /* stkadj */
- rte
.endm
+.macro RDUSP
+ movel sw_usp,%a2
+.endm
+
+.macro WRUSP
+ movel %a0,sw_usp
+.endm
+
+#else /* !CONFIG_COLDFIRE_SW_A7 */
/*
- * Quick exception save, use current stack only.
+ * Modern ColdFire parts have separate supervisor and user stack
+ * pointers. Simple load and restore macros for this case.
*/
-.macro SAVE_LOCAL
+.macro SAVE_ALL
move #0x2700,%sr /* disable intrs */
clrl %sp@- /* stkadj */
movel %d0,%sp@- /* orig d0 */
@@ -112,7 +117,7 @@
moveml %d1-%d5/%a0-%a2,%sp@
.endm
-.macro RESTORE_LOCAL
+.macro RESTORE_USER
moveml %sp@,%d1-%d5/%a0-%a2
lea %sp@(32),%sp /* space for 8 regs */
movel %sp@+,%d0
@@ -121,6 +126,18 @@
rte
.endm
+.macro RDUSP
+ /*move %usp,%a2*/
+ .word 0x4e6a
+.endm
+
+.macro WRUSP
+ /*move %a0,%usp*/
+ .word 0x4e60
+.endm
+
+#endif /* !CONFIG_COLDFIRE_SW_A7 */
+
.macro SAVE_SWITCH_STACK
lea %sp@(-24),%sp /* 6 regs */
moveml %a3-%a6/%d6-%d7,%sp@
@@ -131,14 +148,6 @@
lea %sp@(24),%sp /* 6 regs */
.endm
-/*
- * Software copy of the user and kernel stack pointers... Ugh...
- * Need these to get around ColdFire not having separate kernel
- * and user stack pointers.
- */
-.globl sw_usp
-.globl sw_ksp
-
#else /* !CONFIG_COLDFIRE */
/*
@@ -167,6 +176,6 @@
moveml %sp@+,%a3-%a6/%d6-%d7
.endm
-#endif /* !CONFIG_COLDFIRE */
+#endif /* !COLDFIRE_SW_A7 */
#endif /* __ASSEMBLY__ */
#endif /* __M68KNOMMU_ENTRY_H */
diff --git a/arch/m68k/include/asm/gpio.h b/arch/m68k/include/asm/gpio.h
index 1b57adbafad5..c64c7b74cf86 100644
--- a/arch/m68k/include/asm/gpio.h
+++ b/arch/m68k/include/asm/gpio.h
@@ -37,7 +37,7 @@
#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
- defined(CONFIG_M532x) || defined(CONFIG_M548x)
+ defined(CONFIG_M532x) || defined(CONFIG_M54xx)
/* These parts have GPIO organized by 8 bit ports */
diff --git a/arch/m68k/include/asm/io_no.h b/arch/m68k/include/asm/io_no.h
index 6e2413e518cb..cf20f3097af6 100644
--- a/arch/m68k/include/asm/io_no.h
+++ b/arch/m68k/include/asm/io_no.h
@@ -145,7 +145,6 @@ static inline void io_insl(unsigned int addr, void *buf, int len)
#define IOMAP_WRITETHROUGH 3
extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag);
-extern void __iounmap(void *addr, unsigned long size);
static inline void *ioremap(unsigned long physaddr, unsigned long size)
{
diff --git a/arch/m68k/include/asm/m5206sim.h b/arch/m68k/include/asm/m5206sim.h
index 9c384e294af9..561b03b5ddf8 100644
--- a/arch/m68k/include/asm/m5206sim.h
+++ b/arch/m68k/include/asm/m5206sim.h
@@ -12,6 +12,10 @@
#define m5206sim_h
/****************************************************************************/
+#define CPU_NAME "COLDFIRE(m5206)"
+#define CPU_INSTR_PER_JIFFY 3
+
+#include <asm/m52xxacr.h>
/*
* Define the 5206 SIM register set addresses.
@@ -88,6 +92,14 @@
#define MCFSIM_PADDR (MCF_MBAR + 0x1c5) /* Parallel Direction (r/w) */
#define MCFSIM_PADAT (MCF_MBAR + 0x1c9) /* Parallel Port Value (r/w) */
+#if defined(CONFIG_NETtel)
+#define MCFUART_BASE1 0x180 /* Base address of UART1 */
+#define MCFUART_BASE2 0x140 /* Base address of UART2 */
+#else
+#define MCFUART_BASE1 0x140 /* Base address of UART1 */
+#define MCFUART_BASE2 0x180 /* Base address of UART2 */
+#endif
+
/*
* Define system peripheral IRQ usage.
*/
@@ -95,7 +107,7 @@
#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
/*
- * Generic GPIO
+ * Generic GPIO
*/
#define MCFGPIO_PIN_MAX 8
#define MCFGPIO_IRQ_VECBASE -1
diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h
index db824a4b136e..88ed8239fe4e 100644
--- a/arch/m68k/include/asm/m520xsim.h
+++ b/arch/m68k/include/asm/m520xsim.h
@@ -11,6 +11,11 @@
#define m520xsim_h
/****************************************************************************/
+#define CPU_NAME "COLDFIRE(m520x)"
+#define CPU_INSTR_PER_JIFFY 3
+
+#include <asm/m52xxacr.h>
+
/*
* Define the 520x SIM register set addresses.
*/
@@ -54,6 +59,9 @@
#define MCFSIM_SDCS0 0x000a8110 /* SDRAM Chip Select 0 Configuration */
#define MCFSIM_SDCS1 0x000a8114 /* SDRAM Chip Select 1 Configuration */
+/*
+ * EPORT and GPIO registers.
+ */
#define MCFEPORT_EPDDR 0xFC088002
#define MCFEPORT_EPDR 0xFC088004
#define MCFEPORT_EPPDR 0xFC088005
@@ -97,6 +105,7 @@
#define MCFGPIO_PCLRR_UART 0xFC0A402A
#define MCFGPIO_PCLRR_FECH 0xFC0A402B
#define MCFGPIO_PCLRR_FECL 0xFC0A402C
+
/*
* Generic GPIO support
*/
@@ -109,7 +118,6 @@
#define MCFGPIO_PIN_MAX 80
#define MCFGPIO_IRQ_MAX 8
#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE
-/****************************************************************************/
#define MCF_GPIO_PAR_UART (0xA4036)
#define MCF_GPIO_PAR_FECI2C (0xA4033)
@@ -126,6 +134,13 @@
#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04)
/*
+ * UART module.
+ */
+#define MCFUART_BASE1 0x60000 /* Base address of UART1 */
+#define MCFUART_BASE2 0x64000 /* Base address of UART2 */
+#define MCFUART_BASE3 0x68000 /* Base address of UART2 */
+
+/*
* Reset Controll Unit.
*/
#define MCF_RCR 0xFC0A0000
diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h
index e8d06b24a48e..4ad7a00257a8 100644
--- a/arch/m68k/include/asm/m523xsim.h
+++ b/arch/m68k/include/asm/m523xsim.h
@@ -11,6 +11,10 @@
#define m523xsim_h
/****************************************************************************/
+#define CPU_NAME "COLDFIRE(m523x)"
+#define CPU_INSTR_PER_JIFFY 3
+
+#include <asm/m52xxacr.h>
/*
* Define the 523x SIM register set addresses.
@@ -50,6 +54,13 @@
#define MCF_RCR_SWRESET 0x80 /* Software reset bit */
#define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */
+/*
+ * UART module.
+ */
+#define MCFUART_BASE1 0x200 /* Base address of UART1 */
+#define MCFUART_BASE2 0x240 /* Base address of UART2 */
+#define MCFUART_BASE3 0x280 /* Base address of UART3 */
+
#define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100000)
#define MCFGPIO_PODR_DATAH (MCF_IPSBAR + 0x100001)
#define MCFGPIO_PODR_DATAL (MCF_IPSBAR + 0x100002)
diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h
index 79b7b402f3c9..4908b118f2fd 100644
--- a/arch/m68k/include/asm/m5249sim.h
+++ b/arch/m68k/include/asm/m5249sim.h
@@ -11,6 +11,11 @@
#define m5249sim_h
/****************************************************************************/
+#define CPU_NAME "COLDFIRE(m5249)"
+#define CPU_INSTR_PER_JIFFY 3
+
+#include <asm/m52xxacr.h>
+
/*
* Define the 5249 SIM register set addresses.
*/
@@ -56,6 +61,11 @@
#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */
#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */
+/*
+ * UART module.
+ */
+#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */
+#define MCFUART_BASE2 0x200 /* Base address of UART2 */
/*
* Some symbol defines for the above...
diff --git a/arch/m68k/include/asm/m5272sim.h b/arch/m68k/include/asm/m5272sim.h
index df3332c2317d..b7cc50abc831 100644
--- a/arch/m68k/include/asm/m5272sim.h
+++ b/arch/m68k/include/asm/m5272sim.h
@@ -12,6 +12,11 @@
#define m5272sim_h
/****************************************************************************/
+#define CPU_NAME "COLDFIRE(m5272)"
+#define CPU_INSTR_PER_JIFFY 3
+
+#include <asm/m52xxacr.h>
+
/*
* Define the 5272 SIM register set addresses.
*/
@@ -62,6 +67,9 @@
#define MCFSIM_DCMR1 0x5c /* DRAM 1 Mask reg (r/w) */
#define MCFSIM_DCCR1 0x63 /* DRAM 1 Control reg (r/w) */
+#define MCFUART_BASE1 0x100 /* Base address of UART1 */
+#define MCFUART_BASE2 0x140 /* Base address of UART2 */
+
#define MCFSIM_PACNT (MCF_MBAR + 0x80) /* Port A Control (r/w) */
#define MCFSIM_PADDR (MCF_MBAR + 0x84) /* Port A Direction (r/w) */
#define MCFSIM_PADAT (MCF_MBAR + 0x86) /* Port A Data (r/w) */
diff --git a/arch/m68k/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h
index 1feb46f108ce..e8042e8bc003 100644
--- a/arch/m68k/include/asm/m527xsim.h
+++ b/arch/m68k/include/asm/m527xsim.h
@@ -11,6 +11,10 @@
#define m527xsim_h
/****************************************************************************/
+#define CPU_NAME "COLDFIRE(m527x)"
+#define CPU_INSTR_PER_JIFFY 3
+
+#include <asm/m52xxacr.h>
/*
* Define the 5270/5271 SIM register set addresses.
@@ -55,6 +59,12 @@
#define MCFSIM_DMR1 0x5c /* SDRAM address mask 1 */
#endif
+/*
+ * UART module.
+ */
+#define MCFUART_BASE1 0x200 /* Base address of UART1 */
+#define MCFUART_BASE2 0x240 /* Base address of UART2 */
+#define MCFUART_BASE3 0x280 /* Base address of UART3 */
#ifdef CONFIG_M5271
#define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100000)
diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h
index 891cbedad972..a6d2f4d9aaa0 100644
--- a/arch/m68k/include/asm/m528xsim.h
+++ b/arch/m68k/include/asm/m528xsim.h
@@ -11,6 +11,10 @@
#define m528xsim_h
/****************************************************************************/
+#define CPU_NAME "COLDFIRE(m528x)"
+#define CPU_INSTR_PER_JIFFY 3
+
+#include <asm/m52xxacr.h>
/*
* Define the 5280/5282 SIM register set addresses.
@@ -42,6 +46,13 @@
#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */
/*
+ * UART module.
+ */
+#define MCFUART_BASE1 0x200 /* Base address of UART1 */
+#define MCFUART_BASE2 0x240 /* Base address of UART2 */
+#define MCFUART_BASE3 0x280 /* Base address of UART3 */
+
+/*
* GPIO registers
*/
#define MCFGPIO_PORTA (MCF_IPSBAR + 0x00100000)
diff --git a/arch/m68k/include/asm/m52xxacr.h b/arch/m68k/include/asm/m52xxacr.h
new file mode 100644
index 000000000000..abc391a9ae8d
--- /dev/null
+++ b/arch/m68k/include/asm/m52xxacr.h
@@ -0,0 +1,94 @@
+/****************************************************************************/
+
+/*
+ * m52xxacr.h -- ColdFire version 2 core cache support
+ *
+ * (C) Copyright 2010, Greg Ungerer <gerg@snapgear.com>
+ */
+
+/****************************************************************************/
+#ifndef m52xxacr_h
+#define m52xxacr_h
+/****************************************************************************/
+
+/*
+ * All varients of the ColdFire using version 2 cores have a similar
+ * cache setup. Although not absolutely identical the cache register
+ * definitions are compatible for all of them. Mostly they support a
+ * configurable cache memory that can be instruction only, data only,
+ * or split instruction and data. The exception is the very old version 2
+ * core based parts, like the 5206(e), 5249 and 5272, which are instruction
+ * cache only. Cache size varies from 2k up to 16k.
+ */
+
+/*
+ * Define the Cache Control register flags.
+ */
+#define CACR_CENB 0x80000000 /* Enable cache */
+#define CACR_CDPI 0x10000000 /* Disable invalidation by CPUSHL */
+#define CACR_CFRZ 0x08000000 /* Cache freeze mode */
+#define CACR_CINV 0x01000000 /* Invalidate cache */
+#define CACR_DISI 0x00800000 /* Disable instruction cache */
+#define CACR_DISD 0x00400000 /* Disable data cache */
+#define CACR_INVI 0x00200000 /* Invalidate instruction cache */
+#define CACR_INVD 0x00100000 /* Invalidate data cache */
+#define CACR_CEIB 0x00000400 /* Non-cachable instruction burst */
+#define CACR_DCM 0x00000200 /* Default cache mode */
+#define CACR_DBWE 0x00000100 /* Buffered write enable */
+#define CACR_DWP 0x00000020 /* Write protection */
+#define CACR_EUSP 0x00000010 /* Enable separate user a7 */
+
+/*
+ * Define the Access Control register flags.
+ */
+#define ACR_BASE_POS 24 /* Address Base (upper 8 bits) */
+#define ACR_MASK_POS 16 /* Address Mask (next 8 bits) */
+#define ACR_ENABLE 0x00008000 /* Enable this ACR */
+#define ACR_USER 0x00000000 /* Allow only user accesses */
+#define ACR_SUPER 0x00002000 /* Allow supervisor access only */
+#define ACR_ANY 0x00004000 /* Allow any access type */
+#define ACR_CENB 0x00000000 /* Caching of region enabled */
+#define ACR_CDIS 0x00000040 /* Caching of region disabled */
+#define ACR_BWE 0x00000020 /* Write buffer enabled */
+#define ACR_WPROTECT 0x00000004 /* Write protect region */
+
+/*
+ * Set the cache controller settings we will use. On the cores that support
+ * a split cache configuration we allow all the combinations at Kconfig
+ * time. For those cores that only have an instruction cache we just set
+ * that as on.
+ */
+#if defined(CONFIG_CACHE_I)
+#define CACHE_TYPE (CACR_DISD + CACR_EUSP)
+#define CACHE_INVTYPEI 0
+#elif defined(CONFIG_CACHE_D)
+#define CACHE_TYPE (CACR_DISI + CACR_EUSP)
+#define CACHE_INVTYPED 0
+#elif defined(CONFIG_CACHE_BOTH)
+#define CACHE_TYPE CACR_EUSP
+#define CACHE_INVTYPEI CACR_INVI
+#define CACHE_INVTYPED CACR_INVD
+#else
+/* This is the instruction cache only devices (no split cache, no eusp) */
+#define CACHE_TYPE 0
+#define CACHE_INVTYPEI 0
+#endif
+
+#define CACHE_INIT (CACR_CINV + CACHE_TYPE)
+#define CACHE_MODE (CACR_CENB + CACHE_TYPE + CACR_DCM)
+
+#define CACHE_INVALIDATE (CACHE_MODE + CACR_CINV)
+#if defined(CACHE_INVTYPEI)
+#define CACHE_INVALIDATEI (CACHE_MODE + CACR_CINV + CACHE_INVTYPEI)
+#endif
+#if defined(CACHE_INVTYPED)
+#define CACHE_INVALIDATED (CACHE_MODE + CACR_CINV + CACHE_INVTYPED)
+#endif
+
+#define ACR0_MODE ((CONFIG_RAMBASE & 0xff000000) + \
+ (0x000f0000) + \
+ (ACR_ENABLE + ACR_ANY + ACR_CENB + ACR_BWE))
+#define ACR1_MODE 0
+
+/****************************************************************************/
+#endif /* m52xxsim_h */
diff --git a/arch/m68k/include/asm/m5307sim.h b/arch/m68k/include/asm/m5307sim.h
index c6830e5b54ce..0bf57397e7a9 100644
--- a/arch/m68k/include/asm/m5307sim.h
+++ b/arch/m68k/include/asm/m5307sim.h
@@ -14,6 +14,11 @@
#define m5307sim_h
/****************************************************************************/
+#define CPU_NAME "COLDFIRE(m5307)"
+#define CPU_INSTR_PER_JIFFY 3
+
+#include <asm/m53xxacr.h>
+
/*
* Define the 5307 SIM register set addresses.
*/
@@ -94,6 +99,17 @@
#define MCFSIM_PADAT (MCF_MBAR + 0x248)
/*
+ * UART module.
+ */
+#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
+#define MCFUART_BASE1 0x200 /* Base address of UART1 */
+#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */
+#else
+#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */
+#define MCFUART_BASE2 0x200 /* Base address of UART2 */
+#endif
+
+/*
* Generic GPIO support
*/
#define MCFGPIO_PIN_MAX 16
@@ -146,32 +162,5 @@
#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */
#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
-/*
- * Define the Cache register flags.
- */
-#define CACR_EC (1<<31)
-#define CACR_ESB (1<<29)
-#define CACR_DPI (1<<28)
-#define CACR_HLCK (1<<27)
-#define CACR_CINVA (1<<24)
-#define CACR_DNFB (1<<10)
-#define CACR_DCM_WTHRU (0<<8)
-#define CACR_DCM_WBACK (1<<8)
-#define CACR_DCM_OFF_PRE (2<<8)
-#define CACR_DCM_OFF_IMP (3<<8)
-#define CACR_DW (1<<5)
-
-#define ACR_BASE_POS 24
-#define ACR_MASK_POS 16
-#define ACR_ENABLE (1<<15)
-#define ACR_USER (0<<13)
-#define ACR_SUPER (1<<13)
-#define ACR_ANY (2<<13)
-#define ACR_CM_WTHRU (0<<5)
-#define ACR_CM_WBACK (1<<5)
-#define ACR_CM_OFF_PRE (2<<5)
-#define ACR_CM_OFF_IMP (3<<5)
-#define ACR_WPROTECT (1<<2)
-
/****************************************************************************/
#endif /* m5307sim_h */
diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h
index c4bf1c81e3cf..e6470f8ca324 100644
--- a/arch/m68k/include/asm/m532xsim.h
+++ b/arch/m68k/include/asm/m532xsim.h
@@ -9,6 +9,11 @@
#define m532xsim_h
/****************************************************************************/
+#define CPU_NAME "COLDFIRE(m532x)"
+#define CPU_INSTR_PER_JIFFY 3
+
+#include <asm/m53xxacr.h>
+
#define MCF_REG32(x) (*(volatile unsigned long *)(x))
#define MCF_REG16(x) (*(volatile unsigned short *)(x))
#define MCF_REG08(x) (*(volatile unsigned char *)(x))
@@ -74,31 +79,11 @@
#define MCF_IRQ_PROFILER (64 + 33) /* Timer1 */
/*
- * Define the Cache register flags.
+ * UART module.
*/
-#define CACR_EC (1<<31)
-#define CACR_ESB (1<<29)
-#define CACR_DPI (1<<28)
-#define CACR_HLCK (1<<27)
-#define CACR_CINVA (1<<24)
-#define CACR_DNFB (1<<10)
-#define CACR_DCM_WTHRU (0<<8)
-#define CACR_DCM_WBACK (1<<8)
-#define CACR_DCM_OFF_PRE (2<<8)
-#define CACR_DCM_OFF_IMP (3<<8)
-#define CACR_DW (1<<5)
-
-#define ACR_BASE_POS 24
-#define ACR_MASK_POS 16
-#define ACR_ENABLE (1<<15)
-#define ACR_USER (0<<13)
-#define ACR_SUPER (1<<13)
-#define ACR_ANY (2<<13)
-#define ACR_CM_WTHRU (0<<5)
-#define ACR_CM_WBACK (1<<5)
-#define ACR_CM_OFF_PRE (2<<5)
-#define ACR_CM_OFF_IMP (3<<5)
-#define ACR_WPROTECT (1<<2)
+#define MCFUART_BASE1 0xFC060000 /* Base address of UART1 */
+#define MCFUART_BASE2 0xFC064000 /* Base address of UART2 */
+#define MCFUART_BASE3 0xFC068000 /* Base address of UART3 */
/*********************************************************************
*
diff --git a/arch/m68k/include/asm/m53xxacr.h b/arch/m68k/include/asm/m53xxacr.h
new file mode 100644
index 000000000000..cd952b0a8bd3
--- /dev/null
+++ b/arch/m68k/include/asm/m53xxacr.h
@@ -0,0 +1,101 @@
+/****************************************************************************/
+
+/*
+ * m53xxacr.h -- ColdFire version 3 core cache support
+ *
+ * (C) Copyright 2010, Greg Ungerer <gerg@snapgear.com>
+ */
+
+/****************************************************************************/
+#ifndef m53xxacr_h
+#define m53xxacr_h
+/****************************************************************************/
+
+/*
+ * All varients of the ColdFire using version 3 cores have a similar
+ * cache setup. They have a unified instruction and data cache, with
+ * configurable write-through or copy-back operation.
+ */
+
+/*
+ * Define the Cache Control register flags.
+ */
+#define CACR_EC 0x80000000 /* Enable cache */
+#define CACR_ESB 0x20000000 /* Enable store buffer */
+#define CACR_DPI 0x10000000 /* Disable invalidation by CPUSHL */
+#define CACR_HLCK 0x08000000 /* Half cache lock mode */
+#define CACR_CINVA 0x01000000 /* Invalidate cache */
+#define CACR_DNFB 0x00000400 /* Inhibited fill buffer */
+#define CACR_DCM_WT 0x00000000 /* Cacheable write-through */
+#define CACR_DCM_CB 0x00000100 /* Cacheable copy-back */
+#define CACR_DCM_PRE 0x00000200 /* Cache inhibited, precise */
+#define CACR_DCM_IMPRE 0x00000300 /* Cache inhibited, imprecise */
+#define CACR_WPROTECT 0x00000020 /* Write protect*/
+#define CACR_EUSP 0x00000010 /* Eanble separate user a7 */
+
+/*
+ * Define the Access Control register flags.
+ */
+#define ACR_BASE_POS 24 /* Address Base (upper 8 bits) */
+#define ACR_MASK_POS 16 /* Address Mask (next 8 bits) */
+#define ACR_ENABLE 0x00008000 /* Enable this ACR */
+#define ACR_USER 0x00000000 /* Allow only user accesses */
+#define ACR_SUPER 0x00002000 /* Allow supervisor access only */
+#define ACR_ANY 0x00004000 /* Allow any access type */
+#define ACR_CM_WT 0x00000000 /* Cacheable, write-through */
+#define ACR_CM_CB 0x00000020 /* Cacheable, copy-back */
+#define ACR_CM_PRE 0x00000040 /* Cache inhibited, precise */
+#define ACR_CM_IMPRE 0x00000060 /* Cache inhibited, imprecise */
+#define ACR_WPROTECT 0x00000004 /* Write protect region */
+
+/*
+ * Define the cache type and arrangement (needed for pushes).
+ */
+#if defined(CONFIG_M5307)
+#define CACHE_SIZE 0x2000 /* 8k of unified cache */
+#define ICACHE_SIZE CACHE_SIZE
+#define DCACHE_SIZE CACHE_SIZE
+#elif defined(CONFIG_M532x)
+#define CACHE_SIZE 0x4000 /* 32k of unified cache */
+#define ICACHE_SIZE CACHE_SIZE
+#define DCACHE_SIZE CACHE_SIZE
+#endif
+
+#define CACHE_LINE_SIZE 16 /* 16 byte line size */
+#define CACHE_WAYS 4 /* 4 ways - set associative */
+
+/*
+ * Set the cache controller settings we will use. This default in the
+ * CACR is cache inhibited, we use the ACR register to set cacheing
+ * enabled on the regions we want (eg RAM).
+ */
+#if defined(CONFIG_CACHE_COPYBACK)
+#define CACHE_TYPE ACR_CM_CB
+#define CACHE_PUSH
+#else
+#define CACHE_TYPE ACR_CM_WT
+#endif
+
+#ifdef CONFIG_COLDFIRE_SW_A7
+#define CACHE_MODE (CACR_EC + CACR_ESB + CACR_DCM_PRE)
+#else
+#define CACHE_MODE (CACR_EC + CACR_ESB + CACR_DCM_PRE + CACR_EUSP)
+#endif
+
+/*
+ * Unified cache means we will never need to flush for coherency of
+ * instruction fetch. We will need to flush to maintain memory/DMA
+ * coherency though in all cases. And for copyback caches we will need
+ * to push cached data as well.
+ */
+#define CACHE_INIT CACR_CINVA
+#define CACHE_INVALIDATE CACR_CINVA
+#define CACHE_INVALIDATED CACR_CINVA
+
+#define ACR0_MODE ((CONFIG_RAMBASE & 0xff000000) + \
+ (0x000f0000) + \
+ (ACR_ENABLE + ACR_ANY + CACHE_TYPE))
+#define ACR1_MODE 0
+
+/****************************************************************************/
+#endif /* m53xxsim_h */
diff --git a/arch/m68k/include/asm/m5407sim.h b/arch/m68k/include/asm/m5407sim.h
index c399abbf953c..75f5c28a551d 100644
--- a/arch/m68k/include/asm/m5407sim.h
+++ b/arch/m68k/include/asm/m5407sim.h
@@ -14,6 +14,11 @@
#define m5407sim_h
/****************************************************************************/
+#define CPU_NAME "COLDFIRE(m5407)"
+#define CPU_INSTR_PER_JIFFY 3
+
+#include <asm/m54xxacr.h>
+
/*
* Define the 5407 SIM register set addresses.
*/
@@ -73,6 +78,9 @@
#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */
#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */
+#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */
+#define MCFUART_BASE2 0x200 /* Base address of UART2 */
+
#define MCFSIM_PADDR (MCF_MBAR + 0x244)
#define MCFSIM_PADAT (MCF_MBAR + 0x248)
@@ -117,39 +125,5 @@
#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */
#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
-/*
- * Define the Cache register flags.
- */
-#define CACR_DEC 0x80000000 /* Enable data cache */
-#define CACR_DWP 0x40000000 /* Data write protection */
-#define CACR_DESB 0x20000000 /* Enable data store buffer */
-#define CACR_DDPI 0x10000000 /* Disable CPUSHL */
-#define CACR_DHCLK 0x08000000 /* Half data cache lock mode */
-#define CACR_DDCM_WT 0x00000000 /* Write through cache*/
-#define CACR_DDCM_CP 0x02000000 /* Copyback cache */
-#define CACR_DDCM_P 0x04000000 /* No cache, precise */
-#define CACR_DDCM_IMP 0x06000000 /* No cache, imprecise */
-#define CACR_DCINVA 0x01000000 /* Invalidate data cache */
-#define CACR_BEC 0x00080000 /* Enable branch cache */
-#define CACR_BCINVA 0x00040000 /* Invalidate branch cache */
-#define CACR_IEC 0x00008000 /* Enable instruction cache */
-#define CACR_DNFB 0x00002000 /* Inhibited fill buffer */
-#define CACR_IDPI 0x00001000 /* Disable CPUSHL */
-#define CACR_IHLCK 0x00000800 /* Intruction cache half lock */
-#define CACR_IDCM 0x00000400 /* Intruction cache inhibit */
-#define CACR_ICINVA 0x00000100 /* Invalidate instr cache */
-
-#define ACR_BASE_POS 24 /* Address Base */
-#define ACR_MASK_POS 16 /* Address Mask */
-#define ACR_ENABLE 0x00008000 /* Enable address */
-#define ACR_USER 0x00000000 /* User mode access only */
-#define ACR_SUPER 0x00002000 /* Supervisor mode only */
-#define ACR_ANY 0x00004000 /* Match any access mode */
-#define ACR_CM_WT 0x00000000 /* Write through mode */
-#define ACR_CM_CP 0x00000020 /* Copyback mode */
-#define ACR_CM_OFF_PRE 0x00000040 /* No cache, precise */
-#define ACR_CM_OFF_IMP 0x00000060 /* No cache, imprecise */
-#define ACR_WPROTECT 0x00000004 /* Write protect */
-
/****************************************************************************/
#endif /* m5407sim_h */
diff --git a/arch/m68k/include/asm/m54xxacr.h b/arch/m68k/include/asm/m54xxacr.h
new file mode 100644
index 000000000000..16a1835f9b2a
--- /dev/null
+++ b/arch/m68k/include/asm/m54xxacr.h
@@ -0,0 +1,97 @@
+/*
+ * Bit definitions for the MCF54xx ACR and CACR registers.
+ */
+
+#ifndef m54xxacr_h
+#define m54xxacr_h
+
+/*
+ * Define the Cache register flags.
+ */
+#define CACR_DEC 0x80000000 /* Enable data cache */
+#define CACR_DWP 0x40000000 /* Data write protection */
+#define CACR_DESB 0x20000000 /* Enable data store buffer */
+#define CACR_DDPI 0x10000000 /* Disable invalidation by CPUSHL */
+#define CACR_DHCLK 0x08000000 /* Half data cache lock mode */
+#define CACR_DDCM_WT 0x00000000 /* Write through cache*/
+#define CACR_DDCM_CP 0x02000000 /* Copyback cache */
+#define CACR_DDCM_P 0x04000000 /* No cache, precise */
+#define CACR_DDCM_IMP 0x06000000 /* No cache, imprecise */
+#define CACR_DCINVA 0x01000000 /* Invalidate data cache */
+#define CACR_BEC 0x00080000 /* Enable branch cache */
+#define CACR_BCINVA 0x00040000 /* Invalidate branch cache */
+#define CACR_IEC 0x00008000 /* Enable instruction cache */
+#define CACR_DNFB 0x00002000 /* Inhibited fill buffer */
+#define CACR_IDPI 0x00001000 /* Disable CPUSHL */
+#define CACR_IHLCK 0x00000800 /* Intruction cache half lock */
+#define CACR_IDCM 0x00000400 /* Intruction cache inhibit */
+#define CACR_ICINVA 0x00000100 /* Invalidate instr cache */
+#define CACR_EUSP 0x00000020 /* Enable separate user a7 */
+
+#define ACR_BASE_POS 24 /* Address Base */
+#define ACR_MASK_POS 16 /* Address Mask */
+#define ACR_ENABLE 0x00008000 /* Enable address */
+#define ACR_USER 0x00000000 /* User mode access only */
+#define ACR_SUPER 0x00002000 /* Supervisor mode only */
+#define ACR_ANY 0x00004000 /* Match any access mode */
+#define ACR_CM_WT 0x00000000 /* Write through mode */
+#define ACR_CM_CP 0x00000020 /* Copyback mode */
+#define ACR_CM_OFF_PRE 0x00000040 /* No cache, precise */
+#define ACR_CM_OFF_IMP 0x00000060 /* No cache, imprecise */
+#define ACR_CM 0x00000060 /* Cache mode mask */
+#define ACR_WPROTECT 0x00000004 /* Write protect */
+
+#if defined(CONFIG_M5407)
+
+#define ICACHE_SIZE 0x4000 /* instruction - 16k */
+#define DCACHE_SIZE 0x2000 /* data - 8k */
+
+#elif defined(CONFIG_M54xx)
+
+#define ICACHE_SIZE 0x8000 /* instruction - 32k */
+#define DCACHE_SIZE 0x8000 /* data - 32k */
+
+#endif
+
+#define CACHE_LINE_SIZE 0x0010 /* 16 bytes */
+#define CACHE_WAYS 4 /* 4 ways */
+
+/*
+ * Version 4 cores have a true harvard style separate instruction
+ * and data cache. Enable data and instruction caches, also enable write
+ * buffers and branch accelerator.
+ */
+/* attention : enabling CACR_DESB requires a "nop" to flush the store buffer */
+/* use '+' instead of '|' for assembler's sake */
+
+ /* Enable data cache */
+ /* Enable data store buffer */
+ /* outside ACRs : No cache, precise */
+ /* Enable instruction+branch caches */
+#if defined(CONFIG_M5407)
+#define CACHE_MODE (CACR_DEC+CACR_DESB+CACR_DDCM_P+CACR_BEC+CACR_IEC)
+#else
+#define CACHE_MODE (CACR_DEC+CACR_DESB+CACR_DDCM_P+CACR_BEC+CACR_IEC+CACR_EUSP)
+#endif
+#if defined(CONFIG_CACHE_COPYBACK)
+#define DATA_CACHE_MODE (ACR_ENABLE+ACR_ANY+ACR_CM_CP)
+#else
+#define DATA_CACHE_MODE (ACR_ENABLE+ACR_ANY+ACR_CM_WT)
+#endif
+#define INSN_CACHE_MODE (ACR_ENABLE+ACR_ANY)
+
+#define CACHE_INIT (CACR_DCINVA+CACR_BCINVA+CACR_ICINVA)
+#define CACHE_INVALIDATE (CACHE_MODE+CACR_DCINVA+CACR_BCINVA+CACR_ICINVA)
+#define CACHE_INVALIDATEI (CACHE_MODE+CACR_BCINVA+CACR_ICINVA)
+#define CACHE_INVALIDATED (CACHE_MODE+CACR_DCINVA)
+#define ACR0_MODE (0x000f0000+DATA_CACHE_MODE)
+#define ACR1_MODE 0
+#define ACR2_MODE (0x000f0000+INSN_CACHE_MODE)
+#define ACR3_MODE 0
+
+#if ((DATA_CACHE_MODE & ACR_CM) == ACR_CM_CP)
+/* Copyback cache mode must push dirty cache lines first */
+#define CACHE_PUSH
+#endif
+
+#endif /* m54xxacr_h */
diff --git a/arch/m68k/include/asm/m548xgpt.h b/arch/m68k/include/asm/m54xxgpt.h
index 33b2eef90f0a..df75dd87ae7a 100644
--- a/arch/m68k/include/asm/m548xgpt.h
+++ b/arch/m68k/include/asm/m54xxgpt.h
@@ -1,13 +1,13 @@
/*
- * File: m548xgpt.h
- * Purpose: Register and bit definitions for the MCF548X
+ * File: m54xxgpt.h
+ * Purpose: Register and bit definitions for the MCF54XX
*
* Notes:
*
*/
-#ifndef m548xgpt_h
-#define m548xgpt_h
+#ifndef m54xxgpt_h
+#define m54xxgpt_h
/*********************************************************************
*
@@ -87,4 +87,4 @@
/********************************************************************/
-#endif /* m548xgpt_h */
+#endif /* m54xxgpt_h */
diff --git a/arch/m68k/include/asm/m548xsim.h b/arch/m68k/include/asm/m54xxsim.h
index 149135ef30d2..462ae5328441 100644
--- a/arch/m68k/include/asm/m548xsim.h
+++ b/arch/m68k/include/asm/m54xxsim.h
@@ -1,11 +1,16 @@
/*
- * m548xsim.h -- ColdFire 547x/548x System Integration Unit support.
+ * m54xxsim.h -- ColdFire 547x/548x System Integration Unit support.
*/
-#ifndef m548xsim_h
-#define m548xsim_h
+#ifndef m54xxsim_h
+#define m54xxsim_h
-#define MCFINT_VECBASE 64
+#define CPU_NAME "COLDFIRE(m54xx)"
+#define CPU_INSTR_PER_JIFFY 2
+
+#include <asm/m54xxacr.h>
+
+#define MCFINT_VECBASE 64
/*
* Interrupt Controller Registers
@@ -22,6 +27,14 @@
#define MCFINTC_ICR0 0x40 /* Base ICR register */
/*
+ * UART module.
+ */
+#define MCFUART_BASE1 0x8600 /* Base address of UART1 */
+#define MCFUART_BASE2 0x8700 /* Base address of UART2 */
+#define MCFUART_BASE3 0x8800 /* Base address of UART3 */
+#define MCFUART_BASE4 0x8900 /* Base address of UART4 */
+
+/*
* Define system peripheral IRQ usage.
*/
#define MCF_IRQ_TIMER (64 + 54) /* Slice Timer 0 */
@@ -52,4 +65,4 @@
#define MCF_PAR_PSC_RTS_RTS (0x30)
#define MCF_PAR_PSC_CANRX (0x40)
-#endif /* m548xsim_h */
+#endif /* m54xxsim_h */
diff --git a/arch/m68k/include/asm/mcfcache.h b/arch/m68k/include/asm/mcfcache.h
deleted file mode 100644
index f49dfc09f70a..000000000000
--- a/arch/m68k/include/asm/mcfcache.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/****************************************************************************/
-
-/*
- * mcfcache.h -- ColdFire CPU cache support code
- *
- * (C) Copyright 2004, Greg Ungerer <gerg@snapgear.com>
- */
-
-/****************************************************************************/
-#ifndef __M68KNOMMU_MCFCACHE_H
-#define __M68KNOMMU_MCFCACHE_H
-/****************************************************************************/
-
-
-/*
- * The different ColdFire families have different cache arrangments.
- * Everything from a small instruction only cache, to configurable
- * data and/or instruction cache, to unified instruction/data, to
- * harvard style separate instruction and data caches.
- */
-
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272)
-/*
- * Simple version 2 core cache. These have instruction cache only,
- * we just need to invalidate it and enable it.
- */
-.macro CACHE_ENABLE
- movel #0x01000000,%d0 /* invalidate cache cmd */
- movec %d0,%CACR /* do invalidate cache */
- movel #0x80000100,%d0 /* setup cache mask */
- movec %d0,%CACR /* enable cache */
-.endm
-#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */
-
-#if defined(CONFIG_M523x) || defined(CONFIG_M527x)
-/*
- * New version 2 cores have a configurable split cache arrangement.
- * For now I am just enabling instruction cache - but ultimately I
- * think a split instruction/data cache would be better.
- */
-.macro CACHE_ENABLE
- movel #0x01400000,%d0
- movec %d0,%CACR /* invalidate cache */
- nop
- movel #0x0000c000,%d0 /* set SDRAM cached only */
- movec %d0,%ACR0
- movel #0x00000000,%d0 /* no other regions cached */
- movec %d0,%ACR1
- movel #0x80400100,%d0 /* configure cache */
- movec %d0,%CACR /* enable cache */
- nop
-.endm
-#endif /* CONFIG_M523x || CONFIG_M527x */
-
-#if defined(CONFIG_M528x)
-.macro CACHE_ENABLE
- nop
- movel #0x01000000, %d0
- movec %d0, %CACR /* Invalidate cache */
- nop
- movel #0x0000c020, %d0 /* Set SDRAM cached only */
- movec %d0, %ACR0
- movel #0x00000000, %d0 /* No other regions cached */
- movec %d0, %ACR1
- movel #0x80000200, %d0 /* Setup cache mask */
- movec %d0, %CACR /* Enable cache */
- nop
-.endm
-#endif /* CONFIG_M528x */
-
-#if defined(CONFIG_M5249) || defined(CONFIG_M5307)
-/*
- * The version 3 core cache. Oddly enough the version 2 core 5249
- * has the same SDRAM and cache setup as the version 3 cores.
- * This is a single unified instruction/data cache.
- */
-.macro CACHE_ENABLE
- movel #0x01000000,%d0 /* invalidate whole cache */
- movec %d0,%CACR
- nop
-#if defined(DEBUGGER_COMPATIBLE_CACHE) || defined(CONFIG_SECUREEDGEMP3)
- movel #0x0000c000,%d0 /* set SDRAM cached (write-thru) */
-#else
- movel #0x0000c020,%d0 /* set SDRAM cached (copyback) */
-#endif
- movec %d0,%ACR0
- movel #0x00000000,%d0 /* no other regions cached */
- movec %d0,%ACR1
- movel #0xa0000200,%d0 /* enable cache */
- movec %d0,%CACR
- nop
-.endm
-#endif /* CONFIG_M5249 || CONFIG_M5307 */
-
-#if defined(CONFIG_M532x)
-.macro CACHE_ENABLE
- movel #0x01000000,%d0 /* invalidate cache cmd */
- movec %d0,%CACR /* do invalidate cache */
- nop
- movel #0x4001C000,%d0 /* set SDRAM cached (write-thru) */
- movec %d0,%ACR0
- movel #0x00000000,%d0 /* no other regions cached */
- movec %d0,%ACR1
- movel #0x80000200,%d0 /* setup cache mask */
- movec %d0,%CACR /* enable cache */
- nop
-.endm
-#endif /* CONFIG_M532x */
-
-#if defined(CONFIG_M5407) || defined(CONFIG_M548x)
-/*
- * Version 4 cores have a true harvard style separate instruction
- * and data cache. Invalidate and enable cache, also enable write
- * buffers and branch accelerator.
- */
-.macro CACHE_ENABLE
- movel #0x01040100,%d0 /* invalidate whole cache */
- movec %d0,%CACR
- nop
- movel #0x000fc000,%d0 /* set SDRAM cached only */
- movec %d0, %ACR0
- movel #0x00000000,%d0 /* no other regions cached */
- movec %d0, %ACR1
- movel #0x000fc000,%d0 /* set SDRAM cached only */
- movec %d0, %ACR2
- movel #0x00000000,%d0 /* no other regions cached */
- movec %d0, %ACR3
- movel #0xb6088400,%d0 /* enable caches */
- movec %d0,%CACR
- nop
-.endm
-#endif /* CONFIG_M5407 */
-
-#if defined(CONFIG_M520x)
-.macro CACHE_ENABLE
- move.l #0x01000000,%d0 /* invalidate whole cache */
- movec %d0,%CACR
- nop
- move.l #0x0000c000,%d0 /* set SDRAM cached (write-thru) */
- movec %d0,%ACR0
- move.l #0x00000000,%d0 /* no other regions cached */
- movec %d0,%ACR1
- move.l #0x80400000,%d0 /* enable 8K instruction cache */
- movec %d0,%CACR
- nop
-.endm
-#endif /* CONFIG_M520x */
-
-/****************************************************************************/
-#endif /* __M68KNOMMU_MCFCACHE_H */
diff --git a/arch/m68k/include/asm/mcfsim.h b/arch/m68k/include/asm/mcfsim.h
index 6901fd68165b..ebd0304054ad 100644
--- a/arch/m68k/include/asm/mcfsim.h
+++ b/arch/m68k/include/asm/mcfsim.h
@@ -41,8 +41,8 @@
#elif defined(CONFIG_M5407)
#include <asm/m5407sim.h>
#include <asm/mcfintc.h>
-#elif defined(CONFIG_M548x)
-#include <asm/m548xsim.h>
+#elif defined(CONFIG_M54xx)
+#include <asm/m54xxsim.h>
#endif
/****************************************************************************/
diff --git a/arch/m68k/include/asm/mcfuart.h b/arch/m68k/include/asm/mcfuart.h
index db72e2b889ca..2abedff0a694 100644
--- a/arch/m68k/include/asm/mcfuart.h
+++ b/arch/m68k/include/asm/mcfuart.h
@@ -12,49 +12,6 @@
#define mcfuart_h
/****************************************************************************/
-/*
- * Define the base address of the UARTS within the MBAR address
- * space.
- */
-#if defined(CONFIG_M5272)
-#define MCFUART_BASE1 0x100 /* Base address of UART1 */
-#define MCFUART_BASE2 0x140 /* Base address of UART2 */
-#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e)
-#if defined(CONFIG_NETtel)
-#define MCFUART_BASE1 0x180 /* Base address of UART1 */
-#define MCFUART_BASE2 0x140 /* Base address of UART2 */
-#else
-#define MCFUART_BASE1 0x140 /* Base address of UART1 */
-#define MCFUART_BASE2 0x180 /* Base address of UART2 */
-#endif
-#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
-#define MCFUART_BASE1 0x200 /* Base address of UART1 */
-#define MCFUART_BASE2 0x240 /* Base address of UART2 */
-#define MCFUART_BASE3 0x280 /* Base address of UART3 */
-#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
-#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
-#define MCFUART_BASE1 0x200 /* Base address of UART1 */
-#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */
-#else
-#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */
-#define MCFUART_BASE2 0x200 /* Base address of UART2 */
-#endif
-#elif defined(CONFIG_M520x)
-#define MCFUART_BASE1 0x60000 /* Base address of UART1 */
-#define MCFUART_BASE2 0x64000 /* Base address of UART2 */
-#define MCFUART_BASE3 0x68000 /* Base address of UART2 */
-#elif defined(CONFIG_M532x)
-#define MCFUART_BASE1 0xfc060000 /* Base address of UART1 */
-#define MCFUART_BASE2 0xfc064000 /* Base address of UART2 */
-#define MCFUART_BASE3 0xfc068000 /* Base address of UART3 */
-#elif defined(CONFIG_M548x)
-#define MCFUART_BASE1 0x8600 /* on M548x */
-#define MCFUART_BASE2 0x8700 /* on M548x */
-#define MCFUART_BASE3 0x8800 /* on M548x */
-#define MCFUART_BASE4 0x8900 /* on M548x */
-#endif
-
-
#include <linux/serial_core.h>
#include <linux/platform_device.h>
@@ -217,7 +174,7 @@ struct mcf_platform_uart {
#define MCFUART_URF_RXS 0xc0 /* Receiver status */
#endif
-#if defined(CONFIG_M548x)
+#if defined(CONFIG_M54xx)
#define MCFUART_TXFIFOSIZE 512
#elif defined(CONFIG_M5272)
#define MCFUART_TXFIFOSIZE 25
diff --git a/arch/m68k/include/asm/processor.h b/arch/m68k/include/asm/processor.h
index 7a6a7590cc02..278c69bad57a 100644
--- a/arch/m68k/include/asm/processor.h
+++ b/arch/m68k/include/asm/processor.h
@@ -20,23 +20,26 @@
static inline unsigned long rdusp(void)
{
-#ifdef CONFIG_COLDFIRE
+#ifdef CONFIG_COLDFIRE_SW_A7
extern unsigned int sw_usp;
return sw_usp;
#else
- unsigned long usp;
- __asm__ __volatile__("move %/usp,%0" : "=a" (usp));
+ register unsigned long usp __asm__("a0");
+ /* move %usp,%a0 */
+ __asm__ __volatile__(".word 0x4e68" : "=a" (usp));
return usp;
#endif
}
static inline void wrusp(unsigned long usp)
{
-#ifdef CONFIG_COLDFIRE
+#ifdef CONFIG_COLDFIRE_SW_A7
extern unsigned int sw_usp;
sw_usp = usp;
#else
- __asm__ __volatile__("move %0,%/usp" : : "a" (usp));
+ register unsigned long a0 __asm__("a0") = usp;
+ /* move %a0,%usp */
+ __asm__ __volatile__(".word 0x4e60" : : "a" (a0) );
#endif
}
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index fa9f746cf4ae..704e7b92334c 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -75,6 +75,16 @@ config GENERIC_CLOCKEVENTS
config NO_IOPORT
def_bool y
+config COLDFIRE_SW_A7
+ bool
+ default n
+
+config HAVE_CACHE_SPLIT
+ bool
+
+config HAVE_CACHE_CB
+ bool
+
source "init/Kconfig"
source "kernel/Kconfig.freezer"
@@ -107,69 +117,90 @@ config M68360
config M5206
bool "MCF5206"
+ select COLDFIRE_SW_A7
help
Motorola ColdFire 5206 processor support.
config M5206e
bool "MCF5206e"
+ select COLDFIRE_SW_A7
help
Motorola ColdFire 5206e processor support.
config M520x
bool "MCF520x"
select GENERIC_CLOCKEVENTS
+ select HAVE_CACHE_SPLIT
help
Freescale Coldfire 5207/5208 processor support.
config M523x
bool "MCF523x"
select GENERIC_CLOCKEVENTS
+ select HAVE_CACHE_SPLIT
help
Freescale Coldfire 5230/1/2/4/5 processor support
config M5249
bool "MCF5249"
+ select COLDFIRE_SW_A7
help
Motorola ColdFire 5249 processor support.
config M5271
bool "MCF5271"
+ select HAVE_CACHE_SPLIT
help
Freescale (Motorola) ColdFire 5270/5271 processor support.
config M5272
bool "MCF5272"
+ select COLDFIRE_SW_A7
help
Motorola ColdFire 5272 processor support.
config M5275
bool "MCF5275"
+ select HAVE_CACHE_SPLIT
help
Freescale (Motorola) ColdFire 5274/5275 processor support.
config M528x
bool "MCF528x"
select GENERIC_CLOCKEVENTS
+ select HAVE_CACHE_SPLIT
help
Motorola ColdFire 5280/5282 processor support.
config M5307
bool "MCF5307"
+ select COLDFIRE_SW_A7
+ select HAVE_CACHE_CB
help
Motorola ColdFire 5307 processor support.
config M532x
bool "MCF532x"
+ select HAVE_CACHE_CB
help
Freescale (Motorola) ColdFire 532x processor support.
config M5407
bool "MCF5407"
+ select COLDFIRE_SW_A7
+ select HAVE_CACHE_CB
help
Motorola ColdFire 5407 processor support.
+config M547x
+ bool "MCF547x"
+ select HAVE_CACHE_CB
+ help
+ Freescale ColdFire 5470/5471/5472/5473/5474/5475 processor support.
+
config M548x
bool "MCF548x"
+ select HAVE_CACHE_CB
help
Freescale ColdFire 5480/5481/5482/5483/5484/5485 processor support.
@@ -181,9 +212,14 @@ config M527x
select GENERIC_CLOCKEVENTS
default y
+config M54xx
+ bool
+ depends on (M548x || M547x)
+ default y
+
config COLDFIRE
bool
- depends on (M5206 || M5206e || M520x || M523x || M5249 || M527x || M5272 || M528x || M5307 || M532x || M5407 || M548x)
+ depends on (M5206 || M5206e || M520x || M523x || M5249 || M527x || M5272 || M528x || M5307 || M532x || M5407 || M54xx)
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
default y
@@ -230,6 +266,46 @@ config OLDMASK
Build support for the older revision ColdFire 5307 silicon.
Specifically this is the 1H55J mask revision.
+if HAVE_CACHE_SPLIT
+choice
+ prompt "Split Cache Configuration"
+ default CACHE_I
+
+config CACHE_I
+ bool "Instruction"
+ help
+ Use all of the ColdFire CPU cache memory as an instruction cache.
+
+config CACHE_D
+ bool "Data"
+ help
+ Use all of the ColdFire CPU cache memory as a data cache.
+
+config CACHE_BOTH
+ bool "Both"
+ help
+ Split the ColdFire CPU cache, and use half as an instruction cache
+ and half as a data cache.
+endchoice
+endif
+
+if HAVE_CACHE_CB
+choice
+ prompt "Data cache mode"
+ default CACHE_WRITETHRU
+
+config CACHE_WRITETHRU
+ bool "Write-through"
+ help
+ The ColdFire CPU cache is set into Write-through mode.
+
+config CACHE_COPYBACK
+ bool "Copy-back"
+ help
+ The ColdFire CPU cache is set into Copy-back mode.
+endchoice
+endif
+
comment "Platform"
config PILOT3
@@ -245,16 +321,16 @@ config XCOPILOT_BUGS
Support the bugs of Xcopilot.
config UC5272
- bool 'Arcturus Networks uC5272 dimm board support'
- depends on M5272
- help
- Support for the Arcturus Networks uC5272 dimm board.
+ bool 'Arcturus Networks uC5272 dimm board support'
+ depends on M5272
+ help
+ Support for the Arcturus Networks uC5272 dimm board.
config UC5282
- bool "Arcturus Networks uC5282 board support"
- depends on M528x
- help
- Support for the Arcturus Networks uC5282 dimm board.
+ bool "Arcturus Networks uC5282 board support"
+ depends on M528x
+ help
+ Support for the Arcturus Networks uC5282 dimm board.
config UCSIMM
bool "uCsimm module support"
@@ -279,7 +355,7 @@ config DIRECT_IO_ACCESS
depends on (UCSIMM || UCDIMM || DRAGEN2)
help
Disable the CPU internal registers protection in user mode,
- to allow a user application to read/write them.
+ to allow a user application to read/write them.
config INIT_LCD
bool "Initialize LCD"
@@ -517,7 +593,7 @@ config EMAC_INC
depends on (SOM5282EM)
config SNEHA
- bool
+ bool
default y
depends on CPU16B
diff --git a/arch/m68knommu/Makefile b/arch/m68knommu/Makefile
index 026ef16fa68e..589613fed31d 100644
--- a/arch/m68knommu/Makefile
+++ b/arch/m68knommu/Makefile
@@ -25,7 +25,7 @@ platform-$(CONFIG_M528x) := 528x
platform-$(CONFIG_M5307) := 5307
platform-$(CONFIG_M532x) := 532x
platform-$(CONFIG_M5407) := 5407
-platform-$(CONFIG_M548x) := 548x
+platform-$(CONFIG_M54xx) := 54xx
PLATFORM := $(platform-y)
board-$(CONFIG_PILOT) := pilot
@@ -74,7 +74,7 @@ cpuclass-$(CONFIG_M528x) := coldfire
cpuclass-$(CONFIG_M5307) := coldfire
cpuclass-$(CONFIG_M532x) := coldfire
cpuclass-$(CONFIG_M5407) := coldfire
-cpuclass-$(CONFIG_M548x) := coldfire
+cpuclass-$(CONFIG_M54xx) := coldfire
cpuclass-$(CONFIG_M68328) := 68328
cpuclass-$(CONFIG_M68EZ328) := 68328
cpuclass-$(CONFIG_M68VZ328) := 68328
@@ -91,18 +91,18 @@ export PLATFORM BOARD MODEL CPUCLASS
# Some CFLAG additions based on specific CPU type.
#
cflags-$(CONFIG_M5206) := $(call cc-option,-mcpu=5206,-m5200)
-cflags-$(CONFIG_M5206e) := $(call cc-option,-m5206e,-m5200)
+cflags-$(CONFIG_M5206e) := $(call cc-option,-mcpu=5206e,-m5200)
cflags-$(CONFIG_M520x) := $(call cc-option,-mcpu=5208,-m5200)
cflags-$(CONFIG_M523x) := $(call cc-option,-mcpu=523x,-m5307)
cflags-$(CONFIG_M5249) := $(call cc-option,-mcpu=5249,-m5200)
cflags-$(CONFIG_M5271) := $(call cc-option,-mcpu=5271,-m5307)
cflags-$(CONFIG_M5272) := $(call cc-option,-mcpu=5272,-m5307)
cflags-$(CONFIG_M5275) := $(call cc-option,-mcpu=5275,-m5307)
-cflags-$(CONFIG_M528x) := $(call cc-option,-m528x,-m5307)
-cflags-$(CONFIG_M5307) := $(call cc-option,-m5307,-m5200)
+cflags-$(CONFIG_M528x) := $(call cc-option,-mcpu=528x,-m5307)
+cflags-$(CONFIG_M5307) := $(call cc-option,-mcpu=5307,-m5200)
cflags-$(CONFIG_M532x) := $(call cc-option,-mcpu=532x,-m5307)
-cflags-$(CONFIG_M5407) := $(call cc-option,-m5407,-m5200)
-cflags-$(CONFIG_M548x) := $(call cc-option,-m5407,-m5200)
+cflags-$(CONFIG_M5407) := $(call cc-option,-mcpu=5407,-m5200)
+cflags-$(CONFIG_M54xx) := $(call cc-option,-mcpu=5475,-m5200)
cflags-$(CONFIG_M68328) := -m68000
cflags-$(CONFIG_M68EZ328) := -m68000
cflags-$(CONFIG_M68VZ328) := -m68000
diff --git a/arch/m68knommu/kernel/setup.c b/arch/m68knommu/kernel/setup.c
index c684adf5dc40..16b2de7f5101 100644
--- a/arch/m68knommu/kernel/setup.c
+++ b/arch/m68knommu/kernel/setup.c
@@ -55,55 +55,29 @@ void (*mach_halt)(void);
void (*mach_power_off)(void);
#ifdef CONFIG_M68328
- #define CPU "MC68328"
+#define CPU_NAME "MC68328"
#endif
#ifdef CONFIG_M68EZ328
- #define CPU "MC68EZ328"
+#define CPU_NAME "MC68EZ328"
#endif
#ifdef CONFIG_M68VZ328
- #define CPU "MC68VZ328"
+#define CPU_NAME "MC68VZ328"
#endif
#ifdef CONFIG_M68360
- #define CPU "MC68360"
+#define CPU_NAME "MC68360"
#endif
-#if defined(CONFIG_M5206)
- #define CPU "COLDFIRE(m5206)"
+#ifndef CPU_NAME
+#define CPU_NAME "UNKNOWN"
#endif
-#if defined(CONFIG_M5206e)
- #define CPU "COLDFIRE(m5206e)"
-#endif
-#if defined(CONFIG_M520x)
- #define CPU "COLDFIRE(m520x)"
-#endif
-#if defined(CONFIG_M523x)
- #define CPU "COLDFIRE(m523x)"
-#endif
-#if defined(CONFIG_M5249)
- #define CPU "COLDFIRE(m5249)"
-#endif
-#if defined(CONFIG_M5271)
- #define CPU "COLDFIRE(m5270/5271)"
-#endif
-#if defined(CONFIG_M5272)
- #define CPU "COLDFIRE(m5272)"
-#endif
-#if defined(CONFIG_M5275)
- #define CPU "COLDFIRE(m5274/5275)"
-#endif
-#if defined(CONFIG_M528x)
- #define CPU "COLDFIRE(m5280/5282)"
-#endif
-#if defined(CONFIG_M5307)
- #define CPU "COLDFIRE(m5307)"
-#endif
-#if defined(CONFIG_M532x)
- #define CPU "COLDFIRE(m532x)"
-#endif
-#if defined(CONFIG_M5407)
- #define CPU "COLDFIRE(m5407)"
-#endif
-#ifndef CPU
- #define CPU "UNKNOWN"
+
+/*
+ * Different cores have different instruction execution timings.
+ * The old/traditional 68000 cores are basically all the same, at 16.
+ * The ColdFire cores vary a little, their values are defined in their
+ * headers. We default to the standard 68000 value here.
+ */
+#ifndef CPU_INSTR_PER_JIFFY
+#define CPU_INSTR_PER_JIFFY 16
#endif
extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end;
@@ -208,7 +182,7 @@ void __init setup_arch(char **cmdline_p)
command_line[sizeof(command_line) - 1] = 0;
#endif /* CONFIG_UBOOT */
- printk(KERN_INFO "\x0F\r\n\nuClinux/" CPU "\n");
+ printk(KERN_INFO "\x0F\r\n\nuClinux/" CPU_NAME "\n");
#ifdef CONFIG_UCDIMM
printk(KERN_INFO "uCdimm by Lineo, Inc. <www.lineo.com>\n");
@@ -257,11 +231,6 @@ void __init setup_arch(char **cmdline_p)
memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
boot_command_line[COMMAND_LINE_SIZE-1] = 0;
-#ifdef DEBUG
- if (strlen(*cmdline_p))
- printk(KERN_DEBUG "Command line: '%s'\n", *cmdline_p);
-#endif
-
#if defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_DUMMY_CONSOLE)
conswitchp = &dummy_con;
#endif
@@ -303,15 +272,10 @@ static int show_cpuinfo(struct seq_file *m, void *v)
char *cpu, *mmu, *fpu;
u_long clockfreq;
- cpu = CPU;
+ cpu = CPU_NAME;
mmu = "none";
fpu = "none";
-
-#ifdef CONFIG_COLDFIRE
- clockfreq = (loops_per_jiffy * HZ) * 3;
-#else
- clockfreq = (loops_per_jiffy * HZ) * 16;
-#endif
+ clockfreq = (loops_per_jiffy * HZ) * CPU_INSTR_PER_JIFFY;
seq_printf(m, "CPU:\t\t%s\n"
"MMU:\t\t%s\n"
diff --git a/arch/m68knommu/mm/Makefile b/arch/m68knommu/mm/Makefile
index fc91f254f51b..b54ab6b4b523 100644
--- a/arch/m68knommu/mm/Makefile
+++ b/arch/m68knommu/mm/Makefile
@@ -2,4 +2,4 @@
# Makefile for the linux m68knommu specific parts of the memory manager.
#
-obj-y += init.o fault.o memory.o kmap.o
+obj-y += init.o kmap.o
diff --git a/arch/m68knommu/mm/fault.c b/arch/m68knommu/mm/fault.c
deleted file mode 100644
index bc05cf74d9c0..000000000000
--- a/arch/m68knommu/mm/fault.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * linux/arch/m68knommu/mm/fault.c
- *
- * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>,
- * Copyright (C) 2000 Lineo, Inc. (www.lineo.com)
- *
- * Based on:
- *
- * linux/arch/m68k/mm/fault.c
- *
- * Copyright (C) 1995 Hamish Macdonald
- */
-
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/ptrace.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-
-extern void die_if_kernel(char *, struct pt_regs *, long);
-
-/*
- * This routine handles page faults. It determines the problem, and
- * then passes it off to one of the appropriate routines.
- *
- * error_code:
- * bit 0 == 0 means no page found, 1 means protection fault
- * bit 1 == 0 means read, 1 means write
- *
- * If this routine detects a bad access, it returns 1, otherwise it
- * returns 0.
- */
-asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address,
- unsigned long error_code)
-{
-#ifdef DEBUG
- printk(KERN_DEBUG "regs->sr=%#x, regs->pc=%#lx, address=%#lx, %ld\n",
- regs->sr, regs->pc, address, error_code);
-#endif
-
- /*
- * Oops. The kernel tried to access some bad page. We'll have to
- * terminate things with extreme prejudice.
- */
- if ((unsigned long) address < PAGE_SIZE)
- printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference");
- else
- printk(KERN_ALERT "Unable to handle kernel access");
- printk(KERN_ALERT " at virtual address %08lx\n", address);
- die_if_kernel("Oops", regs, error_code);
- do_exit(SIGKILL);
-
- return 1;
-}
-
diff --git a/arch/m68knommu/mm/kmap.c b/arch/m68knommu/mm/kmap.c
index 902c1dfda9e5..ece8d5ad4e6c 100644
--- a/arch/m68knommu/mm/kmap.c
+++ b/arch/m68knommu/mm/kmap.c
@@ -36,15 +36,6 @@ void iounmap(void *addr)
}
/*
- * __iounmap unmaps nearly everything, so be careful
- * it doesn't free currently pointer/page tables anymore but it
- * wans't used anyway and might be added later.
- */
-void __iounmap(void *addr, unsigned long size)
-{
-}
-
-/*
* Set new cache mode for some kernel address space.
* The caller must push data for that range itself, if such data may already
* be in the cache.
diff --git a/arch/m68knommu/mm/memory.c b/arch/m68knommu/mm/memory.c
deleted file mode 100644
index 8f7949e786d4..000000000000
--- a/arch/m68knommu/mm/memory.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * linux/arch/m68knommu/mm/memory.c
- *
- * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>,
- * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
- *
- * Based on:
- *
- * linux/arch/m68k/mm/memory.c
- *
- * Copyright (C) 1995 Hamish Macdonald
- */
-
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/types.h>
-
-#include <asm/segment.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-
-/*
- * Map some physical address range into the kernel address space.
- */
-
-unsigned long kernel_map(unsigned long paddr, unsigned long size,
- int nocacheflag, unsigned long *memavailp )
-{
- return paddr;
-}
-
diff --git a/arch/m68knommu/platform/548x/Makefile b/arch/m68knommu/platform/54xx/Makefile
index e6035e7a2d3f..e6035e7a2d3f 100644
--- a/arch/m68knommu/platform/548x/Makefile
+++ b/arch/m68knommu/platform/54xx/Makefile
diff --git a/arch/m68knommu/platform/548x/config.c b/arch/m68knommu/platform/54xx/config.c
index 9888846bd1cf..78130984db95 100644
--- a/arch/m68knommu/platform/548x/config.c
+++ b/arch/m68knommu/platform/54xx/config.c
@@ -1,7 +1,7 @@
/***************************************************************************/
/*
- * linux/arch/m68knommu/platform/548x/config.c
+ * linux/arch/m68knommu/platform/54xx/config.c
*
* Copyright (C) 2010, Philippe De Muyter <phdm@macqel.be>
*/
@@ -15,13 +15,13 @@
#include <linux/io.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
-#include <asm/m548xsim.h>
+#include <asm/m54xxsim.h>
#include <asm/mcfuart.h>
-#include <asm/m548xgpt.h>
+#include <asm/m54xxgpt.h>
/***************************************************************************/
-static struct mcf_platform_uart m548x_uart_platform[] = {
+static struct mcf_platform_uart m54xx_uart_platform[] = {
{
.mapbase = MCF_MBAR + MCFUART_BASE1,
.irq = 64 + 35,
@@ -40,20 +40,20 @@ static struct mcf_platform_uart m548x_uart_platform[] = {
},
};
-static struct platform_device m548x_uart = {
+static struct platform_device m54xx_uart = {
.name = "mcfuart",
.id = 0,
- .dev.platform_data = m548x_uart_platform,
+ .dev.platform_data = m54xx_uart_platform,
};
-static struct platform_device *m548x_devices[] __initdata = {
- &m548x_uart,
+static struct platform_device *m54xx_devices[] __initdata = {
+ &m54xx_uart,
};
/***************************************************************************/
-static void __init m548x_uart_init_line(int line, int irq)
+static void __init m54xx_uart_init_line(int line, int irq)
{
int rts_cts;
@@ -72,18 +72,18 @@ static void __init m548x_uart_init_line(int line, int irq)
MCF_MBAR + MCF_PAR_PSC(line));
}
-static void __init m548x_uarts_init(void)
+static void __init m54xx_uarts_init(void)
{
- const int nrlines = ARRAY_SIZE(m548x_uart_platform);
+ const int nrlines = ARRAY_SIZE(m54xx_uart_platform);
int line;
for (line = 0; (line < nrlines); line++)
- m548x_uart_init_line(line, m548x_uart_platform[line].irq);
+ m54xx_uart_init_line(line, m54xx_uart_platform[line].irq);
}
/***************************************************************************/
-static void mcf548x_reset(void)
+static void mcf54xx_reset(void)
{
/* disable interrupts and enable the watchdog */
asm("movew #0x2700, %sr\n");
@@ -97,8 +97,8 @@ static void mcf548x_reset(void)
void __init config_BSP(char *commandp, int size)
{
- mach_reset = mcf548x_reset;
- m548x_uarts_init();
+ mach_reset = mcf54xx_reset;
+ m54xx_uarts_init();
}
/***************************************************************************/
@@ -106,7 +106,7 @@ void __init config_BSP(char *commandp, int size)
static int __init init_BSP(void)
{
- platform_add_devices(m548x_devices, ARRAY_SIZE(m548x_devices));
+ platform_add_devices(m54xx_devices, ARRAY_SIZE(m54xx_devices));
return 0;
}
diff --git a/arch/m68knommu/platform/68328/ints.c b/arch/m68knommu/platform/68328/ints.c
index 865852806a17..2a3af193ccd3 100644
--- a/arch/m68knommu/platform/68328/ints.c
+++ b/arch/m68knommu/platform/68328/ints.c
@@ -179,8 +179,8 @@ void __init init_IRQ(void)
IMR = ~0;
for (i = 0; (i < NR_IRQS); i++) {
- set_irq_chip(irq, &intc_irq_chip);
- set_irq_handler(irq, handle_level_irq);
+ set_irq_chip(i, &intc_irq_chip);
+ set_irq_handler(i, handle_level_irq);
}
}
diff --git a/arch/m68knommu/platform/coldfire/Makefile b/arch/m68knommu/platform/coldfire/Makefile
index 45f501fa4525..a8967baabd72 100644
--- a/arch/m68knommu/platform/coldfire/Makefile
+++ b/arch/m68knommu/platform/coldfire/Makefile
@@ -14,7 +14,7 @@
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
-obj-$(CONFIG_COLDFIRE) += clk.o dma.o entry.o vectors.o
+obj-$(CONFIG_COLDFIRE) += cache.o clk.o dma.o entry.o vectors.o
obj-$(CONFIG_M5206) += timers.o intc.o
obj-$(CONFIG_M5206e) += timers.o intc.o
obj-$(CONFIG_M520x) += pit.o intc-simr.o
@@ -26,7 +26,7 @@ obj-$(CONFIG_M528x) += pit.o intc-2.o
obj-$(CONFIG_M5307) += timers.o intc.o
obj-$(CONFIG_M532x) += timers.o intc-simr.o
obj-$(CONFIG_M5407) += timers.o intc.o
-obj-$(CONFIG_M548x) += sltimers.o intc-2.o
+obj-$(CONFIG_M54xx) += sltimers.o intc-2.o
obj-y += pinmux.o gpio.o
extra-y := head.o
diff --git a/arch/m68knommu/platform/coldfire/cache.c b/arch/m68knommu/platform/coldfire/cache.c
new file mode 100644
index 000000000000..235d3c4f4f0f
--- /dev/null
+++ b/arch/m68knommu/platform/coldfire/cache.c
@@ -0,0 +1,48 @@
+/***************************************************************************/
+
+/*
+ * cache.c -- general ColdFire Cache maintainence code
+ *
+ * Copyright (C) 2010, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+/***************************************************************************/
+#ifdef CACHE_PUSH
+/***************************************************************************/
+
+/*
+ * Use cpushl to push all dirty cache lines back to memory.
+ * Older versions of GAS don't seem to know how to generate the
+ * ColdFire cpushl instruction... Oh well, bit stuff it for now.
+ */
+
+void mcf_cache_push(void)
+{
+ __asm__ __volatile__ (
+ "clrl %%d0\n\t"
+ "1:\n\t"
+ "movel %%d0,%%a0\n\t"
+ "2:\n\t"
+ ".word 0xf468\n\t"
+ "addl %0,%%a0\n\t"
+ "cmpl %1,%%a0\n\t"
+ "blt 2b\n\t"
+ "addql #1,%%d0\n\t"
+ "cmpil %2,%%d0\n\t"
+ "bne 1b\n\t"
+ : /* No output */
+ : "i" (CACHE_LINE_SIZE),
+ "i" (DCACHE_SIZE / CACHE_WAYS),
+ "i" (CACHE_WAYS)
+ : "d0", "a0" );
+}
+
+/***************************************************************************/
+#endif /* CACHE_PUSH */
+/***************************************************************************/
diff --git a/arch/m68knommu/platform/coldfire/entry.S b/arch/m68knommu/platform/coldfire/entry.S
index e1debc8285ef..4ddfc3da70d8 100644
--- a/arch/m68knommu/platform/coldfire/entry.S
+++ b/arch/m68knommu/platform/coldfire/entry.S
@@ -36,13 +36,16 @@
#include <asm/asm-offsets.h>
#include <asm/entry.h>
+#ifdef CONFIG_COLDFIRE_SW_A7
+/*
+ * Define software copies of the supervisor and user stack pointers.
+ */
.bss
-
sw_ksp:
.long 0
-
sw_usp:
.long 0
+#endif /* CONFIG_COLDFIRE_SW_A7 */
.text
@@ -51,7 +54,6 @@ sw_usp:
.globl ret_from_exception
.globl ret_from_signal
.globl sys_call_table
-.globl ret_from_interrupt
.globl inthandler
.globl fasthandler
@@ -140,20 +142,7 @@ Luser_return:
jne Lwork_to_do /* still work to do */
Lreturn:
- move #0x2700,%sr /* disable intrs */
- movel sw_usp,%a0 /* get usp */
- movel %sp@(PT_OFF_PC),%a0@- /* copy exception program counter */
- movel %sp@(PT_OFF_FORMATVEC),%a0@- /* copy exception format/vector/sr */
- moveml %sp@,%d1-%d5/%a0-%a2
- lea %sp@(32),%sp /* space for 8 regs */
- movel %sp@+,%d0
- addql #4,%sp /* orig d0 */
- addl %sp@+,%sp /* stk adj */
- addql #8,%sp /* remove exception */
- movel %sp,sw_ksp /* save ksp */
- subql #8,sw_usp /* set exception */
- movel sw_usp,%sp /* restore usp */
- rte
+ RESTORE_USER
Lwork_to_do:
movel %a0@(TI_FLAGS),%d1 /* get thread_info->flags */
@@ -191,31 +180,7 @@ ENTRY(inthandler)
jbsr do_IRQ /* call high level irq handler */
lea %sp@(8),%sp /* pop args off stack */
- bra ret_from_interrupt /* this was fallthrough */
-
-/*
- * This is the fast interrupt handler (for certain hardware interrupt
- * sources). Unlike the normal interrupt handler it just uses the
- * current stack (doesn't care if it is user or kernel). It also
- * doesn't bother doing the bottom half handlers.
- */
-ENTRY(fasthandler)
- SAVE_LOCAL
-
- movew %sp@(PT_OFF_FORMATVEC),%d0
- andl #0x03fc,%d0 /* mask out vector only */
-
- movel %sp,%sp@- /* push regs arg */
- lsrl #2,%d0 /* calculate real vector # */
- movel %d0,%sp@- /* push vector number */
- jbsr do_IRQ /* call high level irq handler */
- lea %sp@(8),%sp /* pop args off stack */
-
- RESTORE_LOCAL
-
-ENTRY(ret_from_interrupt)
- /* the fasthandler is confusing me, haven't seen any user */
- jmp ret_from_exception
+ bra ret_from_exception
/*
* Beware - when entering resume, prev (the current task) is
@@ -226,9 +191,8 @@ ENTRY(ret_from_interrupt)
*/
ENTRY(resume)
movel %a0, %d1 /* get prev thread in d1 */
-
- movel sw_usp,%d0 /* save usp */
- movel %d0,%a0@(TASK_THREAD+THREAD_USP)
+ RDUSP
+ movel %a2,%a0@(TASK_THREAD+THREAD_USP)
SAVE_SWITCH_STACK
movel %sp,%a0@(TASK_THREAD+THREAD_KSP) /* save kernel stack pointer */
@@ -236,5 +200,5 @@ ENTRY(resume)
RESTORE_SWITCH_STACK
movel %a1@(TASK_THREAD+THREAD_USP),%a0 /* restore thread user stack */
- movel %a0, sw_usp
+ WRUSP
rts
diff --git a/arch/m68knommu/platform/coldfire/head.S b/arch/m68knommu/platform/coldfire/head.S
index 0b2d7c7adf79..d5977909ae5f 100644
--- a/arch/m68knommu/platform/coldfire/head.S
+++ b/arch/m68knommu/platform/coldfire/head.S
@@ -3,7 +3,7 @@
/*
* head.S -- common startup code for ColdFire CPUs.
*
- * (C) Copyright 1999-2006, Greg Ungerer <gerg@snapgear.com>.
+ * (C) Copyright 1999-2010, Greg Ungerer <gerg@snapgear.com>.
*/
/*****************************************************************************/
@@ -13,7 +13,6 @@
#include <linux/init.h>
#include <asm/asm-offsets.h>
#include <asm/coldfire.h>
-#include <asm/mcfcache.h>
#include <asm/mcfsim.h>
#include <asm/thread_info.h>
@@ -173,10 +172,27 @@ _start:
/*
* Now that we know what the memory is, lets enable cache
- * and get things moving. This is Coldfire CPU specific.
+ * and get things moving. This is Coldfire CPU specific. Not
+ * all version cores have identical cache register setup. But
+ * it is very similar. Define the exact settings in the headers
+ * then the code here is the same for all.
*/
- CACHE_ENABLE /* enable CPU cache */
-
+ movel #CACHE_INIT,%d0 /* invalidate whole cache */
+ movec %d0,%CACR
+ nop
+ movel #ACR0_MODE,%d0 /* set RAM region for caching */
+ movec %d0,%ACR0
+ movel #ACR1_MODE,%d0 /* anything else to cache? */
+ movec %d0,%ACR1
+#ifdef ACR2_MODE
+ movel #ACR2_MODE,%d0
+ movec %d0,%ACR2
+ movel #ACR3_MODE,%d0
+ movec %d0,%ACR3
+#endif
+ movel #CACHE_MODE,%d0 /* enable cache */
+ movec %d0,%CACR
+ nop
#ifdef CONFIG_ROMFS_FS
/*