summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-05-19 17:48:12 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2016-05-19 17:48:12 -0700
commit78975f23cba0cd195db01cdbd6eb48138a655890 (patch)
tree0e808c0cfe220bd8fb00d66985d71655345904cb
parentfeaa7cb5c59416143432829b15826be76605b8fe (diff)
parent73e8b0528346e88a0624f2d9821f382cd6256677 (diff)
Merge branch 'i2c/for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang: - Peter Rosin did some major rework on the locking of i2c muxes by seperating parent-locked muxes and mux-locked muxes. This avoids deadlocks/workarounds when the mux itself needs i2c commands for muxing. And as a side-effect, other workarounds in the media layer could be eliminated. Also, Peter stepped up as the i2c mux maintainer and will keep an eye on these changes. - major updates to the octeon driver - add a helper to the core to generate the address+rw_bit octal and make drivers use it - quite a bunch of driver updates * 'i2c/for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (84 commits) i2c: rcar: add DMA support i2c: st: Implement bus clear i2c: only check scl functions when using generic recovery i2c: algo-bit: declare i2c_bit_quirk_no_clk_stretch as static i2c: tegra: disable clock before returning error [media] rtl2832: regmap is aware of lockdep, drop local locking hack [media] rtl2832_sdr: get rid of empty regmap wrappers [media] rtl2832: change the i2c gate to be mux-locked [media] si2168: change the i2c gate to be mux-locked iio: imu: inv_mpu6050: change the i2c gate to be mux-locked i2c: mux: document i2c muxes and elaborate on parent-/mux-locked muxes i2c: mux: relax locking of the top i2c adapter during mux-locked muxing i2c: muxes always lock the parent adapter i2c: allow adapter drivers to override the adapter locking i2c: uniphier: add "\n" at the end of error log i2c: mv64xxx: remove CONFIG_HAVE_CLK conditionals i2c: mv64xxx: use clk_{prepare_enable,disable_unprepare} i2c: mv64xxx: handle probe deferral for the clock i2c: mv64xxx: enable the driver on ARCH_MVEBU i2c: octeon: Add workaround for broken irqs on CN3860 ...
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-octeon.txt6
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-rcar.txt3
-rw-r--r--Documentation/i2c/i2c-topology370
-rw-r--r--MAINTAINERS1
-rw-r--r--drivers/i2c/algos/i2c-algo-bit.c2
-rw-r--r--drivers/i2c/busses/Kconfig2
-rw-r--r--drivers/i2c/busses/i2c-bcm-iproc.c2
-rw-r--r--drivers/i2c/busses/i2c-bcm-kona.c5
-rw-r--r--drivers/i2c/busses/i2c-brcmstb.c4
-rw-r--r--drivers/i2c/busses/i2c-cpm.c4
-rw-r--r--drivers/i2c/busses/i2c-dln2.c2
-rw-r--r--drivers/i2c/busses/i2c-exynos5.c10
-rw-r--r--drivers/i2c/busses/i2c-i801.c52
-rw-r--r--drivers/i2c/busses/i2c-ibm_iic.c2
-rw-r--r--drivers/i2c/busses/i2c-img-scb.c4
-rw-r--r--drivers/i2c/busses/i2c-imx.c2
-rw-r--r--drivers/i2c/busses/i2c-iop3xx.c5
-rw-r--r--drivers/i2c/busses/i2c-lpc2k.c4
-rw-r--r--drivers/i2c/busses/i2c-mt65xx.c5
-rw-r--r--drivers/i2c/busses/i2c-mv64xxx.c45
-rw-r--r--drivers/i2c/busses/i2c-nforce2.c2
-rw-r--r--drivers/i2c/busses/i2c-ocores.c5
-rw-r--r--drivers/i2c/busses/i2c-octeon.c998
-rw-r--r--drivers/i2c/busses/i2c-omap.c12
-rw-r--r--drivers/i2c/busses/i2c-powermac.c4
-rw-r--r--drivers/i2c/busses/i2c-qup.c2
-rw-r--r--drivers/i2c/busses/i2c-rcar.c233
-rw-r--r--drivers/i2c/busses/i2c-rk3x.c87
-rw-r--r--drivers/i2c/busses/i2c-s3c2410.c244
-rw-r--r--drivers/i2c/busses/i2c-sh_mobile.c3
-rw-r--r--drivers/i2c/busses/i2c-sirf.c4
-rw-r--r--drivers/i2c/busses/i2c-st.c48
-rw-r--r--drivers/i2c/busses/i2c-tegra.c81
-rw-r--r--drivers/i2c/busses/i2c-uniphier-f.c2
-rw-r--r--drivers/i2c/busses/i2c-uniphier.c2
-rw-r--r--drivers/i2c/i2c-core.c72
-rw-r--r--drivers/i2c/i2c-mux.c300
-rw-r--r--drivers/i2c/muxes/i2c-arb-gpio-challenge.c47
-rw-r--r--drivers/i2c/muxes/i2c-mux-gpio.c73
-rw-r--r--drivers/i2c/muxes/i2c-mux-pca9541.c58
-rw-r--r--drivers/i2c/muxes/i2c-mux-pca954x.c61
-rw-r--r--drivers/i2c/muxes/i2c-mux-pinctrl.c135
-rw-r--r--drivers/i2c/muxes/i2c-mux-reg.c69
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c2
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_core.c1
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c79
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h3
-rw-r--r--drivers/media/dvb-frontends/m88ds3103.c19
-rw-r--r--drivers/media/dvb-frontends/m88ds3103_priv.h2
-rw-r--r--drivers/media/dvb-frontends/rtl2830.c20
-rw-r--r--drivers/media/dvb-frontends/rtl2830_priv.h2
-rw-r--r--drivers/media/dvb-frontends/rtl2832.c243
-rw-r--r--drivers/media/dvb-frontends/rtl2832.h4
-rw-r--r--drivers/media/dvb-frontends/rtl2832_priv.h3
-rw-r--r--drivers/media/dvb-frontends/rtl2832_sdr.c303
-rw-r--r--drivers/media/dvb-frontends/rtl2832_sdr.h5
-rw-r--r--drivers/media/dvb-frontends/si2168.c106
-rw-r--r--drivers/media/dvb-frontends/si2168_priv.h3
-rw-r--r--drivers/media/usb/cx231xx/cx231xx-core.c6
-rw-r--r--drivers/media/usb/cx231xx/cx231xx-i2c.c47
-rw-r--r--drivers/media/usb/cx231xx/cx231xx.h4
-rw-r--r--drivers/media/usb/dvb-usb-v2/rtl28xxu.c5
-rw-r--r--drivers/misc/eeprom/at24.c9
-rw-r--r--drivers/of/unittest.c37
-rw-r--r--include/linux/i2c-mux.h55
-rw-r--r--include/linux/i2c.h50
-rw-r--r--include/uapi/linux/i2c.h13
67 files changed, 2648 insertions, 1445 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c-octeon.txt b/Documentation/devicetree/bindings/i2c/i2c-octeon.txt
index dced82ebe31d..872d485dffab 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-octeon.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-octeon.txt
@@ -4,6 +4,12 @@
Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
+ or
+
+ compatible: "cavium,octeon-7890-twsi"
+
+ Compatibility with cn78XX SOCs.
+
- reg: The base address of the TWSI/I2C bus controller register bank.
- #address-cells: Must be <1>.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
index cf8bfc956cdc..5f0cb502b1db 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
@@ -19,6 +19,9 @@ Optional properties:
- clock-frequency: desired I2C bus clock frequency in Hz. The absence of this
property indicates the default frequency 100 kHz.
- clocks: clock specifier.
+- dmas: Must contain a list of two references to DMA specifiers, one for
+ transmission, and one for reception.
+- dma-names: Must contain a list of two DMA names, "tx" and "rx".
- i2c-scl-falling-time-ns: see i2c.txt
- i2c-scl-internal-delay-ns: see i2c.txt
diff --git a/Documentation/i2c/i2c-topology b/Documentation/i2c/i2c-topology
new file mode 100644
index 000000000000..e0aefeece551
--- /dev/null
+++ b/Documentation/i2c/i2c-topology
@@ -0,0 +1,370 @@
+I2C topology
+============
+
+There are a couple of reasons for building more complex i2c topologies
+than a straight-forward i2c bus with one adapter and one or more devices.
+
+1. A mux may be needed on the bus to prevent address collisions.
+
+2. The bus may be accessible from some external bus master, and arbitration
+ may be needed to determine if it is ok to access the bus.
+
+3. A device (particularly RF tuners) may want to avoid the digital noise
+ from the i2c bus, at least most of the time, and sits behind a gate
+ that has to be operated before the device can be accessed.
+
+Etc
+
+These constructs are represented as i2c adapter trees by Linux, where
+each adapter has a parent adapter (except the root adapter) and zero or
+more child adapters. The root adapter is the actual adapter that issues
+i2c transfers, and all adapters with a parent are part of an "i2c-mux"
+object (quoted, since it can also be an arbitrator or a gate).
+
+Depending of the particular mux driver, something happens when there is
+an i2c transfer on one of its child adapters. The mux driver can
+obviously operate a mux, but it can also do arbitration with an external
+bus master or open a gate. The mux driver has two operations for this,
+select and deselect. select is called before the transfer and (the
+optional) deselect is called after the transfer.
+
+
+Locking
+=======
+
+There are two variants of locking available to i2c muxes, they can be
+mux-locked or parent-locked muxes. As is evident from below, it can be
+useful to know if a mux is mux-locked or if it is parent-locked. The
+following list was correct at the time of writing:
+
+In drivers/i2c/muxes/
+i2c-arb-gpio-challenge Parent-locked
+i2c-mux-gpio Normally parent-locked, mux-locked iff
+ all involved gpio pins are controlled by the
+ same i2c root adapter that they mux.
+i2c-mux-pca9541 Parent-locked
+i2c-mux-pca954x Parent-locked
+i2c-mux-pinctrl Normally parent-locked, mux-locked iff
+ all involved pinctrl devices are controlled
+ by the same i2c root adapter that they mux.
+i2c-mux-reg Parent-locked
+
+In drivers/iio/
+imu/inv_mpu6050/ Mux-locked
+
+In drivers/media/
+dvb-frontends/m88ds3103 Parent-locked
+dvb-frontends/rtl2830 Parent-locked
+dvb-frontends/rtl2832 Mux-locked
+dvb-frontends/si2168 Mux-locked
+usb/cx231xx/ Parent-locked
+
+
+Mux-locked muxes
+----------------
+
+Mux-locked muxes does not lock the entire parent adapter during the
+full select-transfer-deselect transaction, only the muxes on the parent
+adapter are locked. Mux-locked muxes are mostly interesting if the
+select and/or deselect operations must use i2c transfers to complete
+their tasks. Since the parent adapter is not fully locked during the
+full transaction, unrelated i2c transfers may interleave the different
+stages of the transaction. This has the benefit that the mux driver
+may be easier and cleaner to implement, but it has some caveats.
+
+ML1. If you build a topology with a mux-locked mux being the parent
+ of a parent-locked mux, this might break the expectation from the
+ parent-locked mux that the root adapter is locked during the
+ transaction.
+
+ML2. It is not safe to build arbitrary topologies with two (or more)
+ mux-locked muxes that are not siblings, when there are address
+ collisions between the devices on the child adapters of these
+ non-sibling muxes.
+
+ I.e. the select-transfer-deselect transaction targeting e.g. device
+ address 0x42 behind mux-one may be interleaved with a similar
+ operation targeting device address 0x42 behind mux-two. The
+ intension with such a topology would in this hypothetical example
+ be that mux-one and mux-two should not be selected simultaneously,
+ but mux-locked muxes do not guarantee that in all topologies.
+
+ML3. A mux-locked mux cannot be used by a driver for auto-closing
+ gates/muxes, i.e. something that closes automatically after a given
+ number (one, in most cases) of i2c transfers. Unrelated i2c transfers
+ may creep in and close prematurely.
+
+ML4. If any non-i2c operation in the mux driver changes the i2c mux state,
+ the driver has to lock the root adapter during that operation.
+ Otherwise garbage may appear on the bus as seen from devices
+ behind the mux, when an unrelated i2c transfer is in flight during
+ the non-i2c mux-changing operation.
+
+
+Mux-locked Example
+------------------
+
+ .----------. .--------.
+ .--------. | mux- |-----| dev D1 |
+ | root |--+--| locked | '--------'
+ '--------' | | mux M1 |--. .--------.
+ | '----------' '--| dev D2 |
+ | .--------. '--------'
+ '--| dev D3 |
+ '--------'
+
+When there is an access to D1, this happens:
+
+ 1. Someone issues an i2c-transfer to D1.
+ 2. M1 locks muxes on its parent (the root adapter in this case).
+ 3. M1 calls ->select to ready the mux.
+ 4. M1 (presumably) does some i2c-transfers as part of its select.
+ These transfers are normal i2c-transfers that locks the parent
+ adapter.
+ 5. M1 feeds the i2c-transfer from step 1 to its parent adapter as a
+ normal i2c-transfer that locks the parent adapter.
+ 6. M1 calls ->deselect, if it has one.
+ 7. Same rules as in step 4, but for ->deselect.
+ 8. M1 unlocks muxes on its parent.
+
+This means that accesses to D2 are lockout out for the full duration
+of the entire operation. But accesses to D3 are possibly interleaved
+at any point.
+
+
+Parent-locked muxes
+-------------------
+
+Parent-locked muxes lock the parent adapter during the full select-
+transfer-deselect transaction. The implication is that the mux driver
+has to ensure that any and all i2c transfers through that parent
+adapter during the transaction are unlocked i2c transfers (using e.g.
+__i2c_transfer), or a deadlock will follow. There are a couple of
+caveats.
+
+PL1. If you build a topology with a parent-locked mux being the child
+ of another mux, this might break a possible assumption from the
+ child mux that the root adapter is unused between its select op
+ and the actual transfer (e.g. if the child mux is auto-closing
+ and the parent mux issus i2c-transfers as part of its select).
+ This is especially the case if the parent mux is mux-locked, but
+ it may also happen if the parent mux is parent-locked.
+
+PL2. If select/deselect calls out to other subsystems such as gpio,
+ pinctrl, regmap or iio, it is essential that any i2c transfers
+ caused by these subsystems are unlocked. This can be convoluted to
+ accomplish, maybe even impossible if an acceptably clean solution
+ is sought.
+
+
+Parent-locked Example
+---------------------
+
+ .----------. .--------.
+ .--------. | parent- |-----| dev D1 |
+ | root |--+--| locked | '--------'
+ '--------' | | mux M1 |--. .--------.
+ | '----------' '--| dev D2 |
+ | .--------. '--------'
+ '--| dev D3 |
+ '--------'
+
+When there is an access to D1, this happens:
+
+ 1. Someone issues an i2c-transfer to D1.
+ 2. M1 locks muxes on its parent (the root adapter in this case).
+ 3. M1 locks its parent adapter.
+ 4. M1 calls ->select to ready the mux.
+ 5. If M1 does any i2c-transfers (on this root adapter) as part of
+ its select, those transfers must be unlocked i2c-transfers so
+ that they do not deadlock the root adapter.
+ 6. M1 feeds the i2c-transfer from step 1 to the root adapter as an
+ unlocked i2c-transfer, so that it does not deadlock the parent
+ adapter.
+ 7. M1 calls ->deselect, if it has one.
+ 8. Same rules as in step 5, but for ->deselect.
+ 9. M1 unlocks its parent adapter.
+10. M1 unlocks muxes on its parent.
+
+
+This means that accesses to both D2 and D3 are locked out for the full
+duration of the entire operation.
+
+
+Complex Examples
+================
+
+Parent-locked mux as parent of parent-locked mux
+------------------------------------------------
+
+This is a useful topology, but it can be bad.
+
+ .----------. .----------. .--------.
+ .--------. | parent- |-----| parent- |-----| dev D1 |
+ | root |--+--| locked | | locked | '--------'
+ '--------' | | mux M1 |--. | mux M2 |--. .--------.
+ | '----------' | '----------' '--| dev D2 |
+ | .--------. | .--------. '--------'
+ '--| dev D4 | '--| dev D3 |
+ '--------' '--------'
+
+When any device is accessed, all other devices are locked out for
+the full duration of the operation (both muxes lock their parent,
+and specifically when M2 requests its parent to lock, M1 passes
+the buck to the root adapter).
+
+This topology is bad if M2 is an auto-closing mux and M1->select
+issues any unlocked i2c transfers on the root adapter that may leak
+through and be seen by the M2 adapter, thus closing M2 prematurely.
+
+
+Mux-locked mux as parent of mux-locked mux
+------------------------------------------
+
+This is a good topology.
+
+ .----------. .----------. .--------.
+ .--------. | mux- |-----| mux- |-----| dev D1 |
+ | root |--+--| locked | | locked | '--------'
+ '--------' | | mux M1 |--. | mux M2 |--. .--------.
+ | '----------' | '----------' '--| dev D2 |
+ | .--------. | .--------. '--------'
+ '--| dev D4 | '--| dev D3 |
+ '--------' '--------'
+
+When device D1 is accessed, accesses to D2 are locked out for the
+full duration of the operation (muxes on the top child adapter of M1
+are locked). But accesses to D3 and D4 are possibly interleaved at
+any point. Accesses to D3 locks out D1 and D2, but accesses to D4
+are still possibly interleaved.
+
+
+Mux-locked mux as parent of parent-locked mux
+---------------------------------------------
+
+This is probably a bad topology.
+
+ .----------. .----------. .--------.
+ .--------. | mux- |-----| parent- |-----| dev D1 |
+ | root |--+--| locked | | locked | '--------'
+ '--------' | | mux M1 |--. | mux M2 |--. .--------.
+ | '----------' | '----------' '--| dev D2 |
+ | .--------. | .--------. '--------'
+ '--| dev D4 | '--| dev D3 |
+ '--------' '--------'
+
+When device D1 is accessed, accesses to D2 and D3 are locked out
+for the full duration of the operation (M1 locks child muxes on the
+root adapter). But accesses to D4 are possibly interleaved at any
+point.
+
+This kind of topology is generally not suitable and should probably
+be avoided. The reason is that M2 probably assumes that there will
+be no i2c transfers during its calls to ->select and ->deselect, and
+if there are, any such transfers might appear on the slave side of M2
+as partial i2c transfers, i.e. garbage or worse. This might cause
+device lockups and/or other problems.
+
+The topology is especially troublesome if M2 is an auto-closing
+mux. In that case, any interleaved accesses to D4 might close M2
+prematurely, as might any i2c-transfers part of M1->select.
+
+But if M2 is not making the above stated assumption, and if M2 is not
+auto-closing, the topology is fine.
+
+
+Parent-locked mux as parent of mux-locked mux
+---------------------------------------------
+
+This is a good topology.
+
+ .----------. .----------. .--------.
+ .--------. | parent- |-----| mux- |-----| dev D1 |
+ | root |--+--| locked | | locked | '--------'
+ '--------' | | mux M1 |--. | mux M2 |--. .--------.
+ | '----------' | '----------' '--| dev D2 |
+ | .--------. | .--------. '--------'
+ '--| dev D4 | '--| dev D3 |
+ '--------' '--------'
+
+When D1 is accessed, accesses to D2 are locked out for the full
+duration of the operation (muxes on the top child adapter of M1
+are locked). Accesses to D3 and D4 are possibly interleaved at
+any point, just as is expected for mux-locked muxes.
+
+When D3 or D4 are accessed, everything else is locked out. For D3
+accesses, M1 locks the root adapter. For D4 accesses, the root
+adapter is locked directly.
+
+
+Two mux-locked sibling muxes
+----------------------------
+
+This is a good topology.
+
+ .--------.
+ .----------. .--| dev D1 |
+ | mux- |--' '--------'
+ .--| locked | .--------.
+ | | mux M1 |-----| dev D2 |
+ | '----------' '--------'
+ | .----------. .--------.
+ .--------. | | mux- |-----| dev D3 |
+ | root |--+--| locked | '--------'
+ '--------' | | mux M2 |--. .--------.
+ | '----------' '--| dev D4 |
+ | .--------. '--------'
+ '--| dev D5 |
+ '--------'
+
+When D1 is accessed, accesses to D2, D3 and D4 are locked out. But
+accesses to D5 may be interleaved at any time.
+
+
+Two parent-locked sibling muxes
+-------------------------------
+
+This is a good topology.
+
+ .--------.
+ .----------. .--| dev D1 |
+ | parent- |--' '--------'
+ .--| locked | .--------.
+ | | mux M1 |-----| dev D2 |
+ | '----------' '--------'
+ | .----------. .--------.
+ .--------. | | parent- |-----| dev D3 |
+ | root |--+--| locked | '--------'
+ '--------' | | mux M2 |--. .--------.
+ | '----------' '--| dev D4 |
+ | .--------. '--------'
+ '--| dev D5 |
+ '--------'
+
+When any device is accessed, accesses to all other devices are locked
+out.
+
+
+Mux-locked and parent-locked sibling muxes
+------------------------------------------
+
+This is a good topology.
+
+ .--------.
+ .----------. .--| dev D1 |
+ | mux- |--' '--------'
+ .--| locked | .--------.
+ | | mux M1 |-----| dev D2 |
+ | '----------' '--------'
+ | .----------. .--------.
+ .--------. | | parent- |-----| dev D3 |
+ | root |--+--| locked | '--------'
+ '--------' | | mux M2 |--. .--------.
+ | '----------' '--| dev D4 |
+ | .--------. '--------'
+ '--| dev D5 |
+ '--------'
+
+When D1 or D2 are accessed, accesses to D3 and D4 are locked out while
+accesses to D5 may interleave. When D3 or D4 are accessed, accesses to
+all other devices are locked out.
diff --git a/MAINTAINERS b/MAINTAINERS
index 0d4f9a1c7ce4..65f3277a8cf0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5348,6 +5348,7 @@ I2C MUXES
M: Peter Rosin <peda@axentia.se>
L: linux-i2c@vger.kernel.org
S: Maintained
+F: Documentation/i2c/i2c-topology
F: Documentation/i2c/muxes/
F: Documentation/devicetree/bindings/i2c/i2c-mux*
F: drivers/i2c/i2c-mux.c
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index 9d233bbde5e1..a8e89df665b9 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -617,7 +617,7 @@ const struct i2c_algorithm i2c_bit_algo = {
};
EXPORT_SYMBOL(i2c_bit_algo);
-const struct i2c_adapter_quirks i2c_bit_quirk_no_clk_stretch = {
+static const struct i2c_adapter_quirks i2c_bit_quirk_no_clk_stretch = {
.flags = I2C_AQ_NO_CLK_STRETCH,
};
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 0967e1a5b3a2..2dd40ddf04de 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -663,7 +663,7 @@ config I2C_MT65XX
config I2C_MV64XXX
tristate "Marvell mv64xxx I2C Controller"
- depends on MV64X60 || PLAT_ORION || ARCH_SUNXI
+ depends on MV64X60 || PLAT_ORION || ARCH_SUNXI || ARCH_MVEBU
help
If you say yes to this option, support will be included for the
built-in I2C interface on the Marvell 64xxx line of host bridges.
diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c
index b9f0fff4e723..19c843828fe2 100644
--- a/drivers/i2c/busses/i2c-bcm-iproc.c
+++ b/drivers/i2c/busses/i2c-bcm-iproc.c
@@ -267,7 +267,7 @@ static int bcm_iproc_i2c_xfer_single_msg(struct bcm_iproc_i2c_dev *iproc_i2c,
iproc_i2c->msg = msg;
/* format and load slave address into the TX FIFO */
- addr = msg->addr << 1 | (msg->flags & I2C_M_RD ? 1 : 0);
+ addr = i2c_8bit_addr_from_msg(msg);
writel(addr, iproc_i2c->base + M_TX_OFFSET);
/*
diff --git a/drivers/i2c/busses/i2c-bcm-kona.c b/drivers/i2c/busses/i2c-bcm-kona.c
index 2c9d9b1c8e64..ac9f47679c3a 100644
--- a/drivers/i2c/busses/i2c-bcm-kona.c
+++ b/drivers/i2c/busses/i2c-bcm-kona.c
@@ -501,10 +501,7 @@ static int bcm_kona_i2c_do_addr(struct bcm_kona_i2c_dev *dev,
return -EREMOTEIO;
}
} else {
- addr = msg->addr << 1;
-
- if (msg->flags & I2C_M_RD)
- addr |= 1;
+ addr = i2c_8bit_addr_from_msg(msg);
if (bcm_kona_i2c_write_byte(dev, addr, 0) < 0)
return -EREMOTEIO;
diff --git a/drivers/i2c/busses/i2c-brcmstb.c b/drivers/i2c/busses/i2c-brcmstb.c
index 4a45408dd820..6a8cfc1344b2 100644
--- a/drivers/i2c/busses/i2c-brcmstb.c
+++ b/drivers/i2c/busses/i2c-brcmstb.c
@@ -446,9 +446,7 @@ static int brcmstb_i2c_do_addr(struct brcmstb_i2c_dev *dev,
}
} else {
- addr = msg->addr << 1;
- if (msg->flags & I2C_M_RD)
- addr |= 1;
+ addr = i2c_8bit_addr_from_msg(msg);
bsc_writel(dev, addr, chip_address);
}
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index b167ab25310a..ee57c1e865e2 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -197,9 +197,7 @@ static void cpm_i2c_parse_message(struct i2c_adapter *adap,
tbdf = cpm->tbase + tx;
rbdf = cpm->rbase + rx;
- addr = pmsg->addr << 1;
- if (pmsg->flags & I2C_M_RD)
- addr |= 1;
+ addr = i2c_8bit_addr_from_msg(pmsg);
tb = cpm->txbuf[tx];
rb = cpm->rxbuf[rx];
diff --git a/drivers/i2c/busses/i2c-dln2.c b/drivers/i2c/busses/i2c-dln2.c
index 1600edd57ce9..f2eb4f76591f 100644
--- a/drivers/i2c/busses/i2c-dln2.c
+++ b/drivers/i2c/busses/i2c-dln2.c
@@ -19,6 +19,7 @@
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/mfd/dln2.h>
+#include <linux/acpi.h>
#define DLN2_I2C_MODULE_ID 0x03
#define DLN2_I2C_CMD(cmd) DLN2_CMD(cmd, DLN2_I2C_MODULE_ID)
@@ -210,6 +211,7 @@ static int dln2_i2c_probe(struct platform_device *pdev)
dln2->adapter.algo = &dln2_i2c_usb_algorithm;
dln2->adapter.quirks = &dln2_i2c_quirks;
dln2->adapter.dev.parent = dev;
+ ACPI_COMPANION_SET(&dln2->adapter.dev, ACPI_COMPANION(&pdev->dev));
dln2->adapter.dev.of_node = dev->of_node;
i2c_set_adapdata(&dln2->adapter, dln2);
snprintf(dln2->adapter.name, sizeof(dln2->adapter.name), "%s-%s-%d",
diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
index f54ece8fce78..c0e3ada02876 100644
--- a/drivers/i2c/busses/i2c-exynos5.c
+++ b/drivers/i2c/busses/i2c-exynos5.c
@@ -861,14 +861,8 @@ static int exynos5_i2c_resume_noirq(struct device *dev)
#endif
static const struct dev_pm_ops exynos5_i2c_dev_pm_ops = {
-#ifdef CONFIG_PM_SLEEP
- .suspend_noirq = exynos5_i2c_suspend_noirq,
- .resume_noirq = exynos5_i2c_resume_noirq,
- .freeze_noirq = exynos5_i2c_suspend_noirq,
- .thaw_noirq = exynos5_i2c_resume_noirq,
- .poweroff_noirq = exynos5_i2c_suspend_noirq,
- .restore_noirq = exynos5_i2c_resume_noirq,
-#endif
+ SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(exynos5_i2c_suspend_noirq,
+ exynos5_i2c_resume_noirq)
};
static struct platform_driver exynos5_i2c_driver = {
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 585a3b7915bd..64b1208bca5e 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -94,6 +94,7 @@
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/platform_data/itco_wdt.h>
+#include <linux/pm_runtime.h>
#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
defined CONFIG_DMI
@@ -714,9 +715,11 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr,
{
int hwpec;
int block = 0;
- int ret, xact = 0;
+ int ret = 0, xact = 0;
struct i801_priv *priv = i2c_get_adapdata(adap);
+ pm_runtime_get_sync(&priv->pci_dev->dev);
+
hwpec = (priv->features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC)
&& size != I2C_SMBUS_QUICK
&& size != I2C_SMBUS_I2C_BLOCK_DATA;
@@ -773,7 +776,8 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr,
default:
dev_err(&priv->pci_dev->dev, "Unsupported transaction %d\n",
size);
- return -EOPNOTSUPP;
+ ret = -EOPNOTSUPP;
+ goto out;
}
if (hwpec) /* enable/disable hardware PEC */
@@ -796,11 +800,11 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr,
~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
if (block)
- return ret;
+ goto out;
if (ret)
- return ret;
+ goto out;
if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK))
- return 0;
+ goto out;
switch (xact & 0x7f) {
case I801_BYTE: /* Result put in SMBHSTDAT0 */
@@ -812,7 +816,11 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr,
(inb_p(SMBHSTDAT1(priv)) << 8);
break;
}
- return 0;
+
+out:
+ pm_runtime_mark_last_busy(&priv->pci_dev->dev);
+ pm_runtime_put_autosuspend(&priv->pci_dev->dev);
+ return ret;
}
@@ -1413,6 +1421,11 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
pci_set_drvdata(dev, priv);
+ pm_runtime_set_autosuspend_delay(&dev->dev, 1000);
+ pm_runtime_use_autosuspend(&dev->dev);
+ pm_runtime_put_autosuspend(&dev->dev);
+ pm_runtime_allow(&dev->dev);
+
return 0;
}
@@ -1420,6 +1433,9 @@ static void i801_remove(struct pci_dev *dev)
{
struct i801_priv *priv = pci_get_drvdata(dev);
+ pm_runtime_forbid(&dev->dev);
+ pm_runtime_get_noresume(&dev->dev);
+
i801_del_mux(priv);
i2c_del_adapter(&priv->adapter);
pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
@@ -1433,34 +1449,32 @@ static void i801_remove(struct pci_dev *dev)
}
#ifdef CONFIG_PM
-static int i801_suspend(struct pci_dev *dev, pm_message_t mesg)
+static int i801_suspend(struct device *dev)
{
- struct i801_priv *priv = pci_get_drvdata(dev);
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ struct i801_priv *priv = pci_get_drvdata(pci_dev);
- pci_save_state(dev);
- pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
- pci_set_power_state(dev, pci_choose_state(dev, mesg));
+ pci_write_config_byte(pci_dev, SMBHSTCFG, priv->original_hstcfg);
return 0;
}
-static int i801_resume(struct pci_dev *dev)
+static int i801_resume(struct device *dev)
{
- pci_set_power_state(dev, PCI_D0);
- pci_restore_state(dev);
return 0;
}
-#else
-#define i801_suspend NULL
-#define i801_resume NULL
#endif
+static UNIVERSAL_DEV_PM_OPS(i801_pm_ops, i801_suspend,
+ i801_resume, NULL);
+
static struct pci_driver i801_driver = {
.name = "i801_smbus",
.id_table = i801_ids,
.probe = i801_probe,
.remove = i801_remove,
- .suspend = i801_suspend,
- .resume = i801_resume,
+ .driver = {
+ .pm = &i801_pm_ops,
+ },
};
static int __init i2c_i801_init(void)
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index b6c080334297..cdaa7be2cd1b 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -269,7 +269,7 @@ static int iic_smbus_quick(struct ibm_iic_private* dev, const struct i2c_msg* p)
ndelay(t->hd_sta);
/* Send address */
- v = (u8)((p->addr << 1) | ((p->flags & I2C_M_RD) ? 1 : 0));
+ v = i2c_8bit_addr_from_msg(p);
for (i = 0, mask = 0x80; i < 8; ++i, mask >>= 1){
out_8(&iic->directcntl, sda);
ndelay(t->low / 2);
diff --git a/drivers/i2c/busses/i2c-img-scb.c b/drivers/i2c/busses/i2c-img-scb.c
index 379ef9c31664..ea20425b6972 100644
--- a/drivers/i2c/busses/i2c-img-scb.c
+++ b/drivers/i2c/busses/i2c-img-scb.c
@@ -751,9 +751,7 @@ static unsigned int img_i2c_atomic(struct img_i2c *i2c,
switch (i2c->at_cur_cmd) {
case CMD_GEN_START:
next_cmd = CMD_GEN_DATA;
- next_data = (i2c->msg.addr << 1);
- if (i2c->msg.flags & I2C_M_RD)
- next_data |= 0x1;
+ next_data = i2c_8bit_addr_from_msg(&i2c->msg);
break;
case CMD_GEN_DATA:
if (i2c->line_status & LINESTAT_INPUT_HELD_V)
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 1ca7ef2314f7..1844bc9f7cd5 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -525,7 +525,7 @@ static int i2c_imx_start(struct imx_i2c_struct *i2c_imx)
imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode, i2c_imx, IMX_I2C_I2CR);
/* Wait controller to be stable */
- udelay(50);
+ usleep_range(50, 150);
/* Start I2C transaction */
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index 72d6161cf77c..85cbe4b55578 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -50,10 +50,7 @@ iic_cook_addr(struct i2c_msg *msg)
{
unsigned char addr;
- addr = (msg->addr << 1);
-
- if (msg->flags & I2C_M_RD)
- addr |= 1;
+ addr = i2c_8bit_addr_from_msg(msg);
return addr;
}
diff --git a/drivers/i2c/busses/i2c-lpc2k.c b/drivers/i2c/busses/i2c-lpc2k.c
index 8560a13bf1b3..586a15205e61 100644
--- a/drivers/i2c/busses/i2c-lpc2k.c
+++ b/drivers/i2c/busses/i2c-lpc2k.c
@@ -133,9 +133,7 @@ static void i2c_lpc2k_pump_msg(struct lpc2k_i2c *i2c)
case M_START:
case M_REPSTART:
/* Start bit was just sent out, send out addr and dir */
- data = i2c->msg->addr << 1;
- if (i2c->msg->flags & I2C_M_RD)
- data |= 1;
+ data = i2c_8bit_addr_from_msg(i2c->msg);
writel(data, i2c->base + LPC24XX_I2DAT);
writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONCLR);
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 453358b4d9ca..d9373e60be8a 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -413,10 +413,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
else
writew(I2C_FS_START_CON, i2c->base + OFFSET_EXT_CONF);
- addr_reg = msgs->addr << 1;
- if (i2c->op == I2C_MASTER_RD)
- addr_reg |= 0x1;
-
+ addr_reg = i2c_8bit_addr_from_msg(msgs);
writew(addr_reg, i2c->base + OFFSET_SLAVE_ADDR);
/* Clear interrupt status */
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 43207f52e5a3..b4dec0841bc2 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -134,9 +134,7 @@ struct mv64xxx_i2c_data {
int rc;
u32 freq_m;
u32 freq_n;
-#if defined(CONFIG_HAVE_CLK)
struct clk *clk;
-#endif
wait_queue_head_t waitq;
spinlock_t lock;
struct i2c_msg *msg;
@@ -757,7 +755,6 @@ static const struct of_device_id mv64xxx_i2c_of_match_table[] = {
MODULE_DEVICE_TABLE(of, mv64xxx_i2c_of_match_table);
#ifdef CONFIG_OF
-#ifdef CONFIG_HAVE_CLK
static int
mv64xxx_calc_freq(struct mv64xxx_i2c_data *drv_data,
const int tclk, const int n, const int m)
@@ -791,25 +788,20 @@ mv64xxx_find_baud_factors(struct mv64xxx_i2c_data *drv_data,
return false;
return true;
}
-#endif /* CONFIG_HAVE_CLK */
static int
mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
struct device *dev)
{
- /* CLK is mandatory when using DT to describe the i2c bus. We
- * need to know tclk in order to calculate bus clock
- * factors.
- */
-#if !defined(CONFIG_HAVE_CLK)
- /* Have OF but no CLK */
- return -ENODEV;
-#else
const struct of_device_id *device;
struct device_node *np = dev->of_node;
u32 bus_freq, tclk;
int rc = 0;
+ /* CLK is mandatory when using DT to describe the i2c bus. We
+ * need to know tclk in order to calculate bus clock
+ * factors.
+ */
if (IS_ERR(drv_data->clk)) {
rc = -ENODEV;
goto out;
@@ -869,7 +861,6 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
out:
return rc;
-#endif
}
#else /* CONFIG_OF */
static int
@@ -907,14 +898,13 @@ mv64xxx_i2c_probe(struct platform_device *pd)
init_waitqueue_head(&drv_data->waitq);
spin_lock_init(&drv_data->lock);
-#if defined(CONFIG_HAVE_CLK)
/* Not all platforms have a clk */
drv_data->clk = devm_clk_get(&pd->dev, NULL);
- if (!IS_ERR(drv_data->clk)) {
- clk_prepare(drv_data->clk);
- clk_enable(drv_data->clk);
- }
-#endif
+ if (IS_ERR(drv_data->clk) && PTR_ERR(drv_data->clk) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ if (!IS_ERR(drv_data->clk))
+ clk_prepare_enable(drv_data->clk);
+
if (pdata) {
drv_data->freq_m = pdata->freq_m;
drv_data->freq_n = pdata->freq_n;
@@ -964,13 +954,10 @@ exit_reset:
if (!IS_ERR_OR_NULL(drv_data->rstc))
reset_control_assert(drv_data->rstc);
exit_clk:
-#if defined(CONFIG_HAVE_CLK)
/* Not all platforms have a clk */
- if (!IS_ERR(drv_data->clk)) {
- clk_disable(drv_data->clk);
- clk_unprepare(drv_data->clk);
- }
-#endif
+ if (!IS_ERR(drv_data->clk))
+ clk_disable_unprepare(drv_data->clk);
+
return rc;
}
@@ -983,13 +970,9 @@ mv64xxx_i2c_remove(struct platform_device *dev)
free_irq(drv_data->irq, drv_data);
if (!IS_ERR_OR_NULL(drv_data->rstc))
reset_control_assert(drv_data->rstc);
-#if defined(CONFIG_HAVE_CLK)
/* Not all platforms have a clk */
- if (!IS_ERR(drv_data->clk)) {
- clk_disable(drv_data->clk);
- clk_unprepare(drv_data->clk);
- }
-#endif
+ if (!IS_ERR(drv_data->clk))
+ clk_disable_unprepare(drv_data->clk);
return 0;
}
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index 70b3c9158509..42fcc9458432 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -127,7 +127,7 @@ static struct pci_driver nforce2_driver;
/* For multiplexing support, we need a global reference to the 1st
SMBus channel */
-#if defined CONFIG_I2C_NFORCE2_S4985 || defined CONFIG_I2C_NFORCE2_S4985_MODULE
+#if IS_ENABLED(CONFIG_I2C_NFORCE2_S4985)
struct i2c_adapter *nforce2_smbus;
EXPORT_SYMBOL_GPL(nforce2_smbus);
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index 11b7b87311ed..dfa7a4b4a91d 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -178,10 +178,7 @@ static void ocores_process(struct ocores_i2c *i2c)
if (i2c->nmsgs) { /* end? */
/* send start? */
if (!(msg->flags & I2C_M_NOSTART)) {
- u8 addr = (msg->addr << 1);
-
- if (msg->flags & I2C_M_RD)
- addr |= 1;
+ u8 addr = i2c_8bit_addr_from_msg(msg);
i2c->state = STATE_START;
diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c
index 46fb6c42934f..aa5f01efd826 100644
--- a/drivers/i2c/busses/i2c-octeon.c
+++ b/drivers/i2c/busses/i2c-octeon.c
@@ -11,6 +11,7 @@
* warranty of any kind, whether express or implied.
*/
+#include <linux/atomic.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
@@ -29,13 +30,23 @@
/* Register offsets */
#define SW_TWSI 0x00
#define TWSI_INT 0x10
+#define SW_TWSI_EXT 0x18
/* Controller command patterns */
#define SW_TWSI_V BIT_ULL(63) /* Valid bit */
+#define SW_TWSI_EIA BIT_ULL(61) /* Extended internal address */
#define SW_TWSI_R BIT_ULL(56) /* Result or read bit */
+#define SW_TWSI_SOVR BIT_ULL(55) /* Size override */
+#define SW_TWSI_SIZE_SHIFT 52
+#define SW_TWSI_ADDR_SHIFT 40
+#define SW_TWSI_IA_SHIFT 32 /* Internal address */
/* Controller opcode word (bits 60:57) */
#define SW_TWSI_OP_SHIFT 57
+#define SW_TWSI_OP_7 (0ULL << SW_TWSI_OP_SHIFT)
+#define SW_TWSI_OP_7_IA (1ULL << SW_TWSI_OP_SHIFT)
+#define SW_TWSI_OP_10 (2ULL << SW_TWSI_OP_SHIFT)
+#define SW_TWSI_OP_10_IA (3ULL << SW_TWSI_OP_SHIFT)
#define SW_TWSI_OP_TWSI_CLK (4ULL << SW_TWSI_OP_SHIFT)
#define SW_TWSI_OP_EOP (6ULL << SW_TWSI_OP_SHIFT) /* Extended opcode */
@@ -48,46 +59,93 @@
#define SW_TWSI_EOP_TWSI_RST (SW_TWSI_OP_EOP | 7ULL << SW_TWSI_EOP_SHIFT)
/* Controller command and status bits */
-#define TWSI_CTL_CE 0x80
+#define TWSI_CTL_CE 0x80 /* High level controller enable */
#define TWSI_CTL_ENAB 0x40 /* Bus enable */
#define TWSI_CTL_STA 0x20 /* Master-mode start, HW clears when done */
#define TWSI_CTL_STP 0x10 /* Master-mode stop, HW clears when done */
#define TWSI_CTL_IFLG 0x08 /* HW event, SW writes 0 to ACK */
#define TWSI_CTL_AAK 0x04 /* Assert ACK */
-/* Some status values */
+/* Status values */
+#define STAT_ERROR 0x00
#define STAT_START 0x08
-#define STAT_RSTART 0x10
+#define STAT_REP_START 0x10
#define STAT_TXADDR_ACK 0x18
+#define STAT_TXADDR_NAK 0x20
#define STAT_TXDATA_ACK 0x28
+#define STAT_TXDATA_NAK 0x30
+#define STAT_LOST_ARB_38 0x38
#define STAT_RXADDR_ACK 0x40
+#define STAT_RXADDR_NAK 0x48
#define STAT_RXDATA_ACK 0x50
+#define STAT_RXDATA_NAK 0x58
+#define STAT_SLAVE_60 0x60
+#define STAT_LOST_ARB_68 0x68
+#define STAT_SLAVE_70 0x70
+#define STAT_LOST_ARB_78 0x78
+#define STAT_SLAVE_80 0x80
+#define STAT_SLAVE_88 0x88
+#define STAT_GENDATA_ACK 0x90
+#define STAT_GENDATA_NAK 0x98
+#define STAT_SLAVE_A0 0xA0
+#define STAT_SLAVE_A8 0xA8
+#define STAT_LOST_ARB_B0 0xB0
+#define STAT_SLAVE_LOST 0xB8
+#define STAT_SLAVE_NAK 0xC0
+#define STAT_SLAVE_ACK 0xC8
+#define STAT_AD2W_ACK 0xD0
+#define STAT_AD2W_NAK 0xD8
#define STAT_IDLE 0xF8
/* TWSI_INT values */
+#define TWSI_INT_ST_INT BIT_ULL(0)
+#define TWSI_INT_TS_INT BIT_ULL(1)
+#define TWSI_INT_CORE_INT BIT_ULL(2)
+#define TWSI_INT_ST_EN BIT_ULL(4)
+#define TWSI_INT_TS_EN BIT_ULL(5)
#define TWSI_INT_CORE_EN BIT_ULL(6)
#define TWSI_INT_SDA_OVR BIT_ULL(8)
#define TWSI_INT_SCL_OVR BIT_ULL(9)
+#define TWSI_INT_SDA BIT_ULL(10)
+#define TWSI_INT_SCL BIT_ULL(11)
+
+#define I2C_OCTEON_EVENT_WAIT 80 /* microseconds */
struct octeon_i2c {
wait_queue_head_t queue;
struct i2c_adapter adap;
int irq;
+ int hlc_irq; /* For cn7890 only */
u32 twsi_freq;
int sys_freq;
void __iomem *twsi_base;
struct device *dev;
+ bool hlc_enabled;
+ bool broken_irq_mode;
+ bool broken_irq_check;
+ void (*int_enable)(struct octeon_i2c *);
+ void (*int_disable)(struct octeon_i2c *);
+ void (*hlc_int_enable)(struct octeon_i2c *);
+ void (*hlc_int_disable)(struct octeon_i2c *);
+ atomic_t int_enable_cnt;
+ atomic_t hlc_int_enable_cnt;
};
+static void octeon_i2c_writeq_flush(u64 val, void __iomem *addr)
+{
+ __raw_writeq(val, addr);
+ __raw_readq(addr); /* wait for write to land */
+}
+
/**
- * octeon_i2c_write_sw - write an I2C core register
+ * octeon_i2c_reg_write - write an I2C core register
* @i2c: The struct octeon_i2c
* @eop_reg: Register selector
* @data: Value to be written
*
* The I2C core registers are accessed indirectly via the SW_TWSI CSR.
*/
-static void octeon_i2c_write_sw(struct octeon_i2c *i2c, u64 eop_reg, u8 data)
+static void octeon_i2c_reg_write(struct octeon_i2c *i2c, u64 eop_reg, u8 data)
{
u64 tmp;
@@ -97,8 +155,13 @@ static void octeon_i2c_write_sw(struct octeon_i2c *i2c, u64 eop_reg, u8 data)
} while ((tmp & SW_TWSI_V) != 0);
}
+#define octeon_i2c_ctl_write(i2c, val) \
+ octeon_i2c_reg_write(i2c, SW_TWSI_EOP_TWSI_CTL, val)
+#define octeon_i2c_data_write(i2c, val) \
+ octeon_i2c_reg_write(i2c, SW_TWSI_EOP_TWSI_DATA, val)
+
/**
- * octeon_i2c_read_sw - read lower bits of an I2C core register
+ * octeon_i2c_reg_read - read lower bits of an I2C core register
* @i2c: The struct octeon_i2c
* @eop_reg: Register selector
*
@@ -106,7 +169,7 @@ static void octeon_i2c_write_sw(struct octeon_i2c *i2c, u64 eop_reg, u8 data)
*
* The I2C core registers are accessed indirectly via the SW_TWSI CSR.
*/
-static u8 octeon_i2c_read_sw(struct octeon_i2c *i2c, u64 eop_reg)
+static u8 octeon_i2c_reg_read(struct octeon_i2c *i2c, u64 eop_reg)
{
u64 tmp;
@@ -118,6 +181,24 @@ static u8 octeon_i2c_read_sw(struct octeon_i2c *i2c, u64 eop_reg)
return tmp & 0xFF;
}
+#define octeon_i2c_ctl_read(i2c) \
+ octeon_i2c_reg_read(i2c, SW_TWSI_EOP_TWSI_CTL)
+#define octeon_i2c_data_read(i2c) \
+ octeon_i2c_reg_read(i2c, SW_TWSI_EOP_TWSI_DATA)
+#define octeon_i2c_stat_read(i2c) \
+ octeon_i2c_reg_read(i2c, SW_TWSI_EOP_TWSI_STAT)
+
+/**
+ * octeon_i2c_read_int - read the TWSI_INT register
+ * @i2c: The struct octeon_i2c
+ *
+ * Returns the value of the register.
+ */
+static u64 octeon_i2c_read_int(struct octeon_i2c *i2c)
+{
+ return __raw_readq(i2c->twsi_base + TWSI_INT);
+}
+
/**
* octeon_i2c_write_int - write the TWSI_INT register
* @i2c: The struct octeon_i2c
@@ -125,8 +206,7 @@ static u8 octeon_i2c_read_sw(struct octeon_i2c *i2c, u64 eop_reg)
*/
static void octeon_i2c_write_int(struct octeon_i2c *i2c, u64 data)
{
- __raw_writeq(data, i2c->twsi_base + TWSI_INT);
- __raw_readq(i2c->twsi_base + TWSI_INT);
+ octeon_i2c_writeq_flush(data, i2c->twsi_base + TWSI_INT);
}
/**
@@ -149,30 +229,96 @@ static void octeon_i2c_int_disable(struct octeon_i2c *i2c)
}
/**
- * octeon_i2c_unblock - unblock the bus
+ * octeon_i2c_int_enable78 - enable the CORE interrupt
* @i2c: The struct octeon_i2c
*
- * If there was a reset while a device was driving 0 to bus, bus is blocked.
- * We toggle it free manually by some clock cycles and send a stop.
+ * The interrupt will be asserted when there is non-STAT_IDLE state in the
+ * SW_TWSI_EOP_TWSI_STAT register.
*/
-static void octeon_i2c_unblock(struct octeon_i2c *i2c)
+static void octeon_i2c_int_enable78(struct octeon_i2c *i2c)
+{
+ atomic_inc_return(&i2c->int_enable_cnt);
+ enable_irq(i2c->irq);
+}
+
+static void __octeon_i2c_irq_disable(atomic_t *cnt, int irq)
{
- int i;
+ int count;
+
+ /*
+ * The interrupt can be disabled in two places, but we only
+ * want to make the disable_irq_nosync() call once, so keep
+ * track with the atomic variable.
+ */
+ count = atomic_dec_if_positive(cnt);
+ if (count >= 0)
+ disable_irq_nosync(irq);
+}
+
+/* disable the CORE interrupt */
+static void octeon_i2c_int_disable78(struct octeon_i2c *i2c)
+{
+ __octeon_i2c_irq_disable(&i2c->int_enable_cnt, i2c->irq);
+}
+
+/**
+ * octeon_i2c_hlc_int_enable78 - enable the ST interrupt
+ * @i2c: The struct octeon_i2c
+ *
+ * The interrupt will be asserted when there is non-STAT_IDLE state in
+ * the SW_TWSI_EOP_TWSI_STAT register.
+ */
+static void octeon_i2c_hlc_int_enable78(struct octeon_i2c *i2c)
+{
+ atomic_inc_return(&i2c->hlc_int_enable_cnt);
+ enable_irq(i2c->hlc_irq);
+}
+
+/* disable the ST interrupt */
+static void octeon_i2c_hlc_int_disable78(struct octeon_i2c *i2c)
+{
+ __octeon_i2c_irq_disable(&i2c->hlc_int_enable_cnt, i2c->hlc_irq);
+}
+
+/*
+ * Cleanup low-level state & enable high-level controller.
+ */
+static void octeon_i2c_hlc_enable(struct octeon_i2c *i2c)
+{
+ int try = 0;
+ u64 val;
+
+ if (i2c->hlc_enabled)
+ return;
+ i2c->hlc_enabled = true;
+
+ while (1) {
+ val = octeon_i2c_ctl_read(i2c);
+ if (!(val & (TWSI_CTL_STA | TWSI_CTL_STP)))
+ break;
+
+ /* clear IFLG event */
+ if (val & TWSI_CTL_IFLG)
+ octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
- dev_dbg(i2c->dev, "%s\n", __func__);
+ if (try++ > 100) {
+ pr_err("%s: giving up\n", __func__);
+ break;
+ }
- for (i = 0; i < 9; i++) {
- octeon_i2c_write_int(i2c, 0);
- udelay(5);
- octeon_i2c_write_int(i2c, TWSI_INT_SCL_OVR);
- udelay(5);
+ /* spin until any start/stop has finished */
+ udelay(10);
}
- /* hand-crank a STOP */
- octeon_i2c_write_int(i2c, TWSI_INT_SDA_OVR | TWSI_INT_SCL_OVR);
- udelay(5);
- octeon_i2c_write_int(i2c, TWSI_INT_SDA_OVR);
- udelay(5);
- octeon_i2c_write_int(i2c, 0);
+ octeon_i2c_ctl_write(i2c, TWSI_CTL_CE | TWSI_CTL_AAK | TWSI_CTL_ENAB);
+}
+
+static void octeon_i2c_hlc_disable(struct octeon_i2c *i2c)
+{
+ if (!i2c->hlc_enabled)
+ return;
+
+ i2c->hlc_enabled = false;
+ octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
}
/* interrupt service routine */
@@ -180,16 +326,44 @@ static irqreturn_t octeon_i2c_isr(int irq, void *dev_id)
{
struct octeon_i2c *i2c = dev_id;
- octeon_i2c_int_disable(i2c);
+ i2c->int_disable(i2c);
+ wake_up(&i2c->queue);
+
+ return IRQ_HANDLED;
+}
+
+/* HLC interrupt service routine */
+static irqreturn_t octeon_i2c_hlc_isr78(int irq, void *dev_id)
+{
+ struct octeon_i2c *i2c = dev_id;
+
+ i2c->hlc_int_disable(i2c);
wake_up(&i2c->queue);
return IRQ_HANDLED;
}
+static bool octeon_i2c_test_iflg(struct octeon_i2c *i2c)
+{
+ return (octeon_i2c_ctl_read(i2c) & TWSI_CTL_IFLG);
+}
-static int octeon_i2c_test_iflg(struct octeon_i2c *i2c)
+static bool octeon_i2c_test_ready(struct octeon_i2c *i2c, bool *first)
{
- return (octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_CTL) & TWSI_CTL_IFLG) != 0;
+ if (octeon_i2c_test_iflg(i2c))
+ return true;
+
+ if (*first) {
+ *first = false;
+ return false;
+ }
+
+ /*
+ * IRQ has signaled an event but IFLG hasn't changed.
+ * Sleep and retry once.
+ */
+ usleep_range(I2C_OCTEON_EVENT_WAIT, 2 * I2C_OCTEON_EVENT_WAIT);
+ return octeon_i2c_test_iflg(i2c);
}
/**
@@ -201,64 +375,493 @@ static int octeon_i2c_test_iflg(struct octeon_i2c *i2c)
static int octeon_i2c_wait(struct octeon_i2c *i2c)
{
long time_left;
+ bool first = 1;
- octeon_i2c_int_enable(i2c);
- time_left = wait_event_timeout(i2c->queue, octeon_i2c_test_iflg(i2c),
+ /*
+ * Some chip revisions don't assert the irq in the interrupt
+ * controller. So we must poll for the IFLG change.
+ */
+ if (i2c->broken_irq_mode) {
+ u64 end = get_jiffies_64() + i2c->adap.timeout;
+
+ while (!octeon_i2c_test_iflg(i2c) &&
+ time_before64(get_jiffies_64(), end))
+ usleep_range(I2C_OCTEON_EVENT_WAIT / 2, I2C_OCTEON_EVENT_WAIT);
+
+ return octeon_i2c_test_iflg(i2c) ? 0 : -ETIMEDOUT;
+ }
+
+ i2c->int_enable(i2c);
+ time_left = wait_event_timeout(i2c->queue, octeon_i2c_test_ready(i2c, &first),
i2c->adap.timeout);
- octeon_i2c_int_disable(i2c);
- if (!time_left) {
- dev_dbg(i2c->dev, "%s: timeout\n", __func__);
- return -ETIMEDOUT;
+ i2c->int_disable(i2c);
+
+ if (i2c->broken_irq_check && !time_left &&
+ octeon_i2c_test_iflg(i2c)) {
+ dev_err(i2c->dev, "broken irq connection detected, switching to polling mode.\n");
+ i2c->broken_irq_mode = true;
+ return 0;
}
+ if (!time_left)
+ return -ETIMEDOUT;
+
return 0;
}
+static int octeon_i2c_check_status(struct octeon_i2c *i2c, int final_read)
+{
+ u8 stat = octeon_i2c_stat_read(i2c);
+
+ switch (stat) {
+ /* Everything is fine */
+ case STAT_IDLE:
+ case STAT_AD2W_ACK:
+ case STAT_RXADDR_ACK:
+ case STAT_TXADDR_ACK:
+ case STAT_TXDATA_ACK:
+ return 0;
+
+ /* ACK allowed on pre-terminal bytes only */
+ case STAT_RXDATA_ACK:
+ if (!final_read)
+ return 0;
+ return -EIO;
+
+ /* NAK allowed on terminal byte only */
+ case STAT_RXDATA_NAK:
+ if (final_read)
+ return 0;
+ return -EIO;
+
+ /* Arbitration lost */
+ case STAT_LOST_ARB_38:
+ case STAT_LOST_ARB_68:
+ case STAT_LOST_ARB_78:
+ case STAT_LOST_ARB_B0:
+ return -EAGAIN;
+
+ /* Being addressed as slave, should back off & listen */
+ case STAT_SLAVE_60:
+ case STAT_SLAVE_70:
+ case STAT_GENDATA_ACK:
+ case STAT_GENDATA_NAK:
+ return -EOPNOTSUPP;
+
+ /* Core busy as slave */
+ case STAT_SLAVE_80:
+ case STAT_SLAVE_88:
+ case STAT_SLAVE_A0:
+ case STAT_SLAVE_A8:
+ case STAT_SLAVE_LOST:
+ case STAT_SLAVE_NAK:
+ case STAT_SLAVE_ACK:
+ return -EOPNOTSUPP;
+
+ case STAT_TXDATA_NAK:
+ return -EIO;
+ case STAT_TXADDR_NAK:
+ case STAT_RXADDR_NAK:
+ case STAT_AD2W_NAK:
+ return -ENXIO;
+ default:
+ dev_err(i2c->dev, "unhandled state: %d\n", stat);
+ return -EIO;
+ }
+}
+
+static bool octeon_i2c_hlc_test_valid(struct octeon_i2c *i2c)
+{
+ return (__raw_readq(i2c->twsi_base + SW_TWSI) & SW_TWSI_V) == 0;
+}
+
+static bool octeon_i2c_hlc_test_ready(struct octeon_i2c *i2c, bool *first)
+{
+ /* check if valid bit is cleared */
+ if (octeon_i2c_hlc_test_valid(i2c))
+ return true;
+
+ if (*first) {
+ *first = false;
+ return false;
+ }
+
+ /*
+ * IRQ has signaled an event but valid bit isn't cleared.
+ * Sleep and retry once.
+ */
+ usleep_range(I2C_OCTEON_EVENT_WAIT, 2 * I2C_OCTEON_EVENT_WAIT);
+ return octeon_i2c_hlc_test_valid(i2c);
+}
+
+static void octeon_i2c_hlc_int_enable(struct octeon_i2c *i2c)
+{
+ octeon_i2c_write_int(i2c, TWSI_INT_ST_EN);
+}
+
+static void octeon_i2c_hlc_int_clear(struct octeon_i2c *i2c)
+{
+ /* clear ST/TS events, listen for neither */
+ octeon_i2c_write_int(i2c, TWSI_INT_ST_INT | TWSI_INT_TS_INT);
+}
+
/**
- * octeon_i2c_start - send START to the bus
+ * octeon_i2c_hlc_wait - wait for an HLC operation to complete
* @i2c: The struct octeon_i2c
*
- * Returns 0 on success, otherwise a negative errno.
+ * Returns 0 on success, otherwise -ETIMEDOUT.
*/
-static int octeon_i2c_start(struct octeon_i2c *i2c)
+static int octeon_i2c_hlc_wait(struct octeon_i2c *i2c)
{
- int result;
- u8 data;
+ bool first = 1;
+ int time_left;
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
- TWSI_CTL_ENAB | TWSI_CTL_STA);
+ /*
+ * Some cn38xx boards don't assert the irq in the interrupt
+ * controller. So we must poll for the valid bit change.
+ */
+ if (i2c->broken_irq_mode) {
+ u64 end = get_jiffies_64() + i2c->adap.timeout;
- result = octeon_i2c_wait(i2c);
- if (result) {
- if (octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT) == STAT_IDLE) {
+ while (!octeon_i2c_hlc_test_valid(i2c) &&
+ time_before64(get_jiffies_64(), end))
+ usleep_range(I2C_OCTEON_EVENT_WAIT / 2, I2C_OCTEON_EVENT_WAIT);
+
+ return octeon_i2c_hlc_test_valid(i2c) ? 0 : -ETIMEDOUT;
+ }
+
+ i2c->hlc_int_enable(i2c);
+ time_left = wait_event_timeout(i2c->queue,
+ octeon_i2c_hlc_test_ready(i2c, &first),
+ i2c->adap.timeout);
+ i2c->hlc_int_disable(i2c);
+ if (!time_left)
+ octeon_i2c_hlc_int_clear(i2c);
+
+ if (i2c->broken_irq_check && !time_left &&
+ octeon_i2c_hlc_test_valid(i2c)) {
+ dev_err(i2c->dev, "broken irq connection detected, switching to polling mode.\n");
+ i2c->broken_irq_mode = true;
+ return 0;
+ }
+
+ if (!time_left)
+ return -ETIMEDOUT;
+ return 0;
+}
+
+/* high-level-controller pure read of up to 8 bytes */
+static int octeon_i2c_hlc_read(struct octeon_i2c *i2c, struct i2c_msg *msgs)
+{
+ int i, j, ret = 0;
+ u64 cmd;
+
+ octeon_i2c_hlc_enable(i2c);
+ octeon_i2c_hlc_int_clear(i2c);
+
+ cmd = SW_TWSI_V | SW_TWSI_R | SW_TWSI_SOVR;
+ /* SIZE */
+ cmd |= (u64)(msgs[0].len - 1) << SW_TWSI_SIZE_SHIFT;
+ /* A */
+ cmd |= (u64)(msgs[0].addr & 0x7full) << SW_TWSI_ADDR_SHIFT;
+
+ if (msgs[0].flags & I2C_M_TEN)
+ cmd |= SW_TWSI_OP_10;
+ else
+ cmd |= SW_TWSI_OP_7;
+
+ octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI);
+ ret = octeon_i2c_hlc_wait(i2c);
+ if (ret)
+ goto err;
+
+ cmd = __raw_readq(i2c->twsi_base + SW_TWSI);
+ if ((cmd & SW_TWSI_R) == 0)
+ return -EAGAIN;
+
+ for (i = 0, j = msgs[0].len - 1; i < msgs[0].len && i < 4; i++, j--)
+ msgs[0].buf[j] = (cmd >> (8 * i)) & 0xff;
+
+ if (msgs[0].len > 4) {
+ cmd = __raw_readq(i2c->twsi_base + SW_TWSI_EXT);
+ for (i = 0; i < msgs[0].len - 4 && i < 4; i++, j--)
+ msgs[0].buf[j] = (cmd >> (8 * i)) & 0xff;
+ }
+
+err:
+ return ret;
+}
+
+/* high-level-controller pure write of up to 8 bytes */
+static int octeon_i2c_hlc_write(struct octeon_i2c *i2c, struct i2c_msg *msgs)
+{
+ int i, j, ret = 0;
+ u64 cmd;
+
+ octeon_i2c_hlc_enable(i2c);
+ octeon_i2c_hlc_int_clear(i2c);
+
+ cmd = SW_TWSI_V | SW_TWSI_SOVR;
+ /* SIZE */
+ cmd |= (u64)(msgs[0].len - 1) << SW_TWSI_SIZE_SHIFT;
+ /* A */
+ cmd |= (u64)(msgs[0].addr & 0x7full) << SW_TWSI_ADDR_SHIFT;
+
+ if (msgs[0].flags & I2C_M_TEN)
+ cmd |= SW_TWSI_OP_10;
+ else
+ cmd |= SW_TWSI_OP_7;
+
+ for (i = 0, j = msgs[0].len - 1; i < msgs[0].len && i < 4; i++, j--)
+ cmd |= (u64)msgs[0].buf[j] << (8 * i);
+
+ if (msgs[0].len > 4) {
+ u64 ext = 0;
+
+ for (i = 0; i < msgs[0].len - 4 && i < 4; i++, j--)
+ ext |= (u64)msgs[0].buf[j] << (8 * i);
+ octeon_i2c_writeq_flush(ext, i2c->twsi_base + SW_TWSI_EXT);
+ }
+
+ octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI);
+ ret = octeon_i2c_hlc_wait(i2c);
+ if (ret)
+ goto err;
+
+ cmd = __raw_readq(i2c->twsi_base + SW_TWSI);
+ if ((cmd & SW_TWSI_R) == 0)
+ return -EAGAIN;
+
+ ret = octeon_i2c_check_status(i2c, false);
+
+err:
+ return ret;
+}
+
+/* high-level-controller composite write+read, msg0=addr, msg1=data */
+static int octeon_i2c_hlc_comp_read(struct octeon_i2c *i2c, struct i2c_msg *msgs)
+{
+ int i, j, ret = 0;
+ u64 cmd;
+
+ octeon_i2c_hlc_enable(i2c);
+
+ cmd = SW_TWSI_V | SW_TWSI_R | SW_TWSI_SOVR;
+ /* SIZE */
+ cmd |= (u64)(msgs[1].len - 1) << SW_TWSI_SIZE_SHIFT;
+ /* A */
+ cmd |= (u64)(msgs[0].addr & 0x7full) << SW_TWSI_ADDR_SHIFT;
+
+ if (msgs[0].flags & I2C_M_TEN)
+ cmd |= SW_TWSI_OP_10_IA;
+ else
+ cmd |= SW_TWSI_OP_7_IA;
+
+ if (msgs[0].len == 2) {
+ u64 ext = 0;
+
+ cmd |= SW_TWSI_EIA;
+ ext = (u64)msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
+ cmd |= (u64)msgs[0].buf[1] << SW_TWSI_IA_SHIFT;
+ octeon_i2c_writeq_flush(ext, i2c->twsi_base + SW_TWSI_EXT);
+ } else {
+ cmd |= (u64)msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
+ }
+
+ octeon_i2c_hlc_int_clear(i2c);
+ octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI);
+
+ ret = octeon_i2c_hlc_wait(i2c);
+ if (ret)
+ goto err;
+
+ cmd = __raw_readq(i2c->twsi_base + SW_TWSI);
+ if ((cmd & SW_TWSI_R) == 0)
+ return -EAGAIN;
+
+ for (i = 0, j = msgs[1].len - 1; i < msgs[1].len && i < 4; i++, j--)
+ msgs[1].buf[j] = (cmd >> (8 * i)) & 0xff;
+
+ if (msgs[1].len > 4) {
+ cmd = __raw_readq(i2c->twsi_base + SW_TWSI_EXT);
+ for (i = 0; i < msgs[1].len - 4 && i < 4; i++, j--)
+ msgs[1].buf[j] = (cmd >> (8 * i)) & 0xff;
+ }
+
+err:
+ return ret;
+}
+
+/* high-level-controller composite write+write, m[0]len<=2, m[1]len<=8 */
+static int octeon_i2c_hlc_comp_write(struct octeon_i2c *i2c, struct i2c_msg *msgs)
+{
+ bool set_ext = false;
+ int i, j, ret = 0;
+ u64 cmd, ext = 0;
+
+ octeon_i2c_hlc_enable(i2c);
+
+ cmd = SW_TWSI_V | SW_TWSI_SOVR;
+ /* SIZE */
+ cmd |= (u64)(msgs[1].len - 1) << SW_TWSI_SIZE_SHIFT;
+ /* A */
+ cmd |= (u64)(msgs[0].addr & 0x7full) << SW_TWSI_ADDR_SHIFT;
+
+ if (msgs[0].flags & I2C_M_TEN)
+ cmd |= SW_TWSI_OP_10_IA;
+ else
+ cmd |= SW_TWSI_OP_7_IA;
+
+ if (msgs[0].len == 2) {
+ cmd |= SW_TWSI_EIA;
+ ext |= (u64)msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
+ set_ext = true;
+ cmd |= (u64)msgs[0].buf[1] << SW_TWSI_IA_SHIFT;
+ } else {
+ cmd |= (u64)msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
+ }
+
+ for (i = 0, j = msgs[1].len - 1; i < msgs[1].len && i < 4; i++, j--)
+ cmd |= (u64)msgs[1].buf[j] << (8 * i);
+
+ if (msgs[1].len > 4) {
+ for (i = 0; i < msgs[1].len - 4 && i < 4; i++, j--)
+ ext |= (u64)msgs[1].buf[j] << (8 * i);
+ set_ext = true;
+ }
+ if (set_ext)
+ octeon_i2c_writeq_flush(ext, i2c->twsi_base + SW_TWSI_EXT);
+
+ octeon_i2c_hlc_int_clear(i2c);
+ octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI);
+
+ ret = octeon_i2c_hlc_wait(i2c);
+ if (ret)
+ goto err;
+
+ cmd = __raw_readq(i2c->twsi_base + SW_TWSI);
+ if ((cmd & SW_TWSI_R) == 0)
+ return -EAGAIN;
+
+ ret = octeon_i2c_check_status(i2c, false);
+
+err:
+ return ret;
+}
+
+/* calculate and set clock divisors */
+static void octeon_i2c_set_clock(struct octeon_i2c *i2c)
+{
+ int tclk, thp_base, inc, thp_idx, mdiv_idx, ndiv_idx, foscl, diff;
+ int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = 1000000;
+
+ for (ndiv_idx = 0; ndiv_idx < 8 && delta_hz != 0; ndiv_idx++) {
+ /*
+ * An mdiv value of less than 2 seems to not work well
+ * with ds1337 RTCs, so we constrain it to larger values.
+ */
+ for (mdiv_idx = 15; mdiv_idx >= 2 && delta_hz != 0; mdiv_idx--) {
/*
- * Controller refused to send start flag May
- * be a client is holding SDA low - let's try
- * to free it.
+ * For given ndiv and mdiv values check the
+ * two closest thp values.
*/
- octeon_i2c_unblock(i2c);
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
- TWSI_CTL_ENAB | TWSI_CTL_STA);
- result = octeon_i2c_wait(i2c);
+ tclk = i2c->twsi_freq * (mdiv_idx + 1) * 10;
+ tclk *= (1 << ndiv_idx);
+ thp_base = (i2c->sys_freq / (tclk * 2)) - 1;
+
+ for (inc = 0; inc <= 1; inc++) {
+ thp_idx = thp_base + inc;
+ if (thp_idx < 5 || thp_idx > 0xff)
+ continue;
+
+ foscl = i2c->sys_freq / (2 * (thp_idx + 1));
+ foscl = foscl / (1 << ndiv_idx);
+ foscl = foscl / (mdiv_idx + 1) / 10;
+ diff = abs(foscl - i2c->twsi_freq);
+ if (diff < delta_hz) {
+ delta_hz = diff;
+ thp = thp_idx;
+ mdiv = mdiv_idx;
+ ndiv = ndiv_idx;
+ }
+ }
}
- if (result)
- return result;
}
+ octeon_i2c_reg_write(i2c, SW_TWSI_OP_TWSI_CLK, thp);
+ octeon_i2c_reg_write(i2c, SW_TWSI_EOP_TWSI_CLKCTL, (mdiv << 3) | ndiv);
+}
+
+static int octeon_i2c_init_lowlevel(struct octeon_i2c *i2c)
+{
+ u8 status = 0;
+ int tries;
+
+ /* reset controller */
+ octeon_i2c_reg_write(i2c, SW_TWSI_EOP_TWSI_RST, 0);
- data = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
- if ((data != STAT_START) && (data != STAT_RSTART)) {
- dev_err(i2c->dev, "%s: bad status (0x%x)\n", __func__, data);
+ for (tries = 10; tries && status != STAT_IDLE; tries--) {
+ udelay(1);
+ status = octeon_i2c_stat_read(i2c);
+ if (status == STAT_IDLE)
+ break;
+ }
+
+ if (status != STAT_IDLE) {
+ dev_err(i2c->dev, "%s: TWSI_RST failed! (0x%x)\n",
+ __func__, status);
return -EIO;
}
+ /* toggle twice to force both teardowns */
+ octeon_i2c_hlc_enable(i2c);
+ octeon_i2c_hlc_disable(i2c);
return 0;
}
+static int octeon_i2c_recovery(struct octeon_i2c *i2c)
+{
+ int ret;
+
+ ret = i2c_recover_bus(&i2c->adap);
+ if (ret)
+ /* recover failed, try hardware re-init */
+ ret = octeon_i2c_init_lowlevel(i2c);
+ return ret;
+}
+
+/**
+ * octeon_i2c_start - send START to the bus
+ * @i2c: The struct octeon_i2c
+ *
+ * Returns 0 on success, otherwise a negative errno.
+ */
+static int octeon_i2c_start(struct octeon_i2c *i2c)
+{
+ int ret;
+ u8 stat;
+
+ octeon_i2c_hlc_disable(i2c);
+
+ octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB | TWSI_CTL_STA);
+ ret = octeon_i2c_wait(i2c);
+ if (ret)
+ goto error;
+
+ stat = octeon_i2c_stat_read(i2c);
+ if (stat == STAT_START || stat == STAT_REP_START)
+ /* START successful, bail out */
+ return 0;
+
+error:
+ /* START failed, try to recover */
+ ret = octeon_i2c_recovery(i2c);
+ return (ret) ? ret : -EAGAIN;
+}
+
/* send STOP to the bus */
static void octeon_i2c_stop(struct octeon_i2c *i2c)
{
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
- TWSI_CTL_ENAB | TWSI_CTL_STP);
+ octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB | TWSI_CTL_STP);
}
/**
@@ -276,31 +879,21 @@ static int octeon_i2c_write(struct octeon_i2c *i2c, int target,
const u8 *data, int length)
{
int i, result;
- u8 tmp;
-
- result = octeon_i2c_start(i2c);
- if (result)
- return result;
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, target << 1);
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
+ octeon_i2c_data_write(i2c, target << 1);
+ octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
result = octeon_i2c_wait(i2c);
if (result)
return result;
for (i = 0; i < length; i++) {
- tmp = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
-
- if ((tmp != STAT_TXADDR_ACK) && (tmp != STAT_TXDATA_ACK)) {
- dev_err(i2c->dev,
- "%s: bad status before write (0x%x)\n",
- __func__, tmp);
- return -EIO;
- }
+ result = octeon_i2c_check_status(i2c, false);
+ if (result)
+ return result;
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, data[i]);
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
+ octeon_i2c_data_write(i2c, data[i]);
+ octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
result = octeon_i2c_wait(i2c);
if (result)
@@ -326,44 +919,36 @@ static int octeon_i2c_read(struct octeon_i2c *i2c, int target,
u8 *data, u16 *rlength, bool recv_len)
{
int i, result, length = *rlength;
- u8 tmp;
+ bool final_read = false;
- if (length < 1)
- return -EINVAL;
+ octeon_i2c_data_write(i2c, (target << 1) | 1);
+ octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
- result = octeon_i2c_start(i2c);
+ result = octeon_i2c_wait(i2c);
if (result)
return result;
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, (target << 1) | 1);
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
-
- result = octeon_i2c_wait(i2c);
+ /* address OK ? */
+ result = octeon_i2c_check_status(i2c, false);
if (result)
return result;
for (i = 0; i < length; i++) {
- tmp = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
+ /* for the last byte TWSI_CTL_AAK must not be set */
+ if (i + 1 == length)
+ final_read = true;
- if ((tmp != STAT_RXDATA_ACK) && (tmp != STAT_RXADDR_ACK)) {
- dev_err(i2c->dev,
- "%s: bad status before read (0x%x)\n",
- __func__, tmp);
- return -EIO;
- }
-
- if (i + 1 < length)
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
- TWSI_CTL_ENAB | TWSI_CTL_AAK);
+ /* clear iflg to allow next event */
+ if (final_read)
+ octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
else
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
- TWSI_CTL_ENAB);
+ octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB | TWSI_CTL_AAK);
result = octeon_i2c_wait(i2c);
if (result)
return result;
- data[i] = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_DATA);
+ data[i] = octeon_i2c_data_read(i2c);
if (recv_len && i == 0) {
if (data[i] > I2C_SMBUS_BLOCK_MAX + 1) {
dev_err(i2c->dev,
@@ -373,6 +958,10 @@ static int octeon_i2c_read(struct octeon_i2c *i2c, int target,
}
length += data[i];
}
+
+ result = octeon_i2c_check_status(i2c, final_read);
+ if (result)
+ return result;
}
*rlength = length;
return 0;
@@ -392,13 +981,41 @@ static int octeon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
struct octeon_i2c *i2c = i2c_get_adapdata(adap);
int i, ret = 0;
+ if (num == 1) {
+ if (msgs[0].len > 0 && msgs[0].len <= 8) {
+ if (msgs[0].flags & I2C_M_RD)
+ ret = octeon_i2c_hlc_read(i2c, msgs);
+ else
+ ret = octeon_i2c_hlc_write(i2c, msgs);
+ goto out;
+ }
+ } else if (num == 2) {
+ if ((msgs[0].flags & I2C_M_RD) == 0 &&
+ (msgs[1].flags & I2C_M_RECV_LEN) == 0 &&
+ msgs[0].len > 0 && msgs[0].len <= 2 &&
+ msgs[1].len > 0 && msgs[1].len <= 8 &&
+ msgs[0].addr == msgs[1].addr) {
+ if (msgs[1].flags & I2C_M_RD)
+ ret = octeon_i2c_hlc_comp_read(i2c, msgs);
+ else
+ ret = octeon_i2c_hlc_comp_write(i2c, msgs);
+ goto out;
+ }
+ }
+
for (i = 0; ret == 0 && i < num; i++) {
struct i2c_msg *pmsg = &msgs[i];
- dev_dbg(i2c->dev,
- "Doing %s %d byte(s) to/from 0x%02x - %d of %d messages\n",
- pmsg->flags & I2C_M_RD ? "read" : "write",
- pmsg->len, pmsg->addr, i + 1, num);
+ /* zero-length messages are not supported */
+ if (!pmsg->len) {
+ ret = -EOPNOTSUPP;
+ break;
+ }
+
+ ret = octeon_i2c_start(i2c);
+ if (ret)
+ return ret;
+
if (pmsg->flags & I2C_M_RD)
ret = octeon_i2c_read(i2c, pmsg->addr, pmsg->buf,
&pmsg->len, pmsg->flags & I2C_M_RECV_LEN);
@@ -407,102 +1024,105 @@ static int octeon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
pmsg->len);
}
octeon_i2c_stop(i2c);
-
+out:
return (ret != 0) ? ret : num;
}
-static u32 octeon_i2c_functionality(struct i2c_adapter *adap)
+static int octeon_i2c_get_scl(struct i2c_adapter *adap)
{
- return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
- I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_SMBUS_BLOCK_PROC_CALL;
+ struct octeon_i2c *i2c = i2c_get_adapdata(adap);
+ u64 state;
+
+ state = octeon_i2c_read_int(i2c);
+ return state & TWSI_INT_SCL;
}
-static const struct i2c_algorithm octeon_i2c_algo = {
- .master_xfer = octeon_i2c_xfer,
- .functionality = octeon_i2c_functionality,
-};
+static void octeon_i2c_set_scl(struct i2c_adapter *adap, int val)
+{
+ struct octeon_i2c *i2c = i2c_get_adapdata(adap);
-static struct i2c_adapter octeon_i2c_ops = {
- .owner = THIS_MODULE,
- .name = "OCTEON adapter",
- .algo = &octeon_i2c_algo,
- .timeout = HZ / 50,
-};
+ octeon_i2c_write_int(i2c, TWSI_INT_SCL_OVR);
+}
-/* calculate and set clock divisors */
-static void octeon_i2c_set_clock(struct octeon_i2c *i2c)
+static int octeon_i2c_get_sda(struct i2c_adapter *adap)
{
- int tclk, thp_base, inc, thp_idx, mdiv_idx, ndiv_idx, foscl, diff;
- int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = 1000000;
+ struct octeon_i2c *i2c = i2c_get_adapdata(adap);
+ u64 state;
- for (ndiv_idx = 0; ndiv_idx < 8 && delta_hz != 0; ndiv_idx++) {
- /*
- * An mdiv value of less than 2 seems to not work well
- * with ds1337 RTCs, so we constrain it to larger values.
- */
- for (mdiv_idx = 15; mdiv_idx >= 2 && delta_hz != 0; mdiv_idx--) {
- /*
- * For given ndiv and mdiv values check the
- * two closest thp values.
- */
- tclk = i2c->twsi_freq * (mdiv_idx + 1) * 10;
- tclk *= (1 << ndiv_idx);
- thp_base = (i2c->sys_freq / (tclk * 2)) - 1;
+ state = octeon_i2c_read_int(i2c);
+ return state & TWSI_INT_SDA;
+}
- for (inc = 0; inc <= 1; inc++) {
- thp_idx = thp_base + inc;
- if (thp_idx < 5 || thp_idx > 0xff)
- continue;
+static void octeon_i2c_prepare_recovery(struct i2c_adapter *adap)
+{
+ struct octeon_i2c *i2c = i2c_get_adapdata(adap);
- foscl = i2c->sys_freq / (2 * (thp_idx + 1));
- foscl = foscl / (1 << ndiv_idx);
- foscl = foscl / (mdiv_idx + 1) / 10;
- diff = abs(foscl - i2c->twsi_freq);
- if (diff < delta_hz) {
- delta_hz = diff;
- thp = thp_idx;
- mdiv = mdiv_idx;
- ndiv = ndiv_idx;
- }
- }
- }
- }
- octeon_i2c_write_sw(i2c, SW_TWSI_OP_TWSI_CLK, thp);
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CLKCTL, (mdiv << 3) | ndiv);
+ /*
+ * The stop resets the state machine, does not _transmit_ STOP unless
+ * engine was active.
+ */
+ octeon_i2c_stop(i2c);
+
+ octeon_i2c_hlc_disable(i2c);
+ octeon_i2c_write_int(i2c, 0);
}
-static int octeon_i2c_init_lowlevel(struct octeon_i2c *i2c)
+static void octeon_i2c_unprepare_recovery(struct i2c_adapter *adap)
{
- u8 status;
- int tries;
+ struct octeon_i2c *i2c = i2c_get_adapdata(adap);
- /* disable high level controller, enable bus access */
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
+ octeon_i2c_write_int(i2c, 0);
+}
- /* reset controller */
- octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_RST, 0);
+static struct i2c_bus_recovery_info octeon_i2c_recovery_info = {
+ .recover_bus = i2c_generic_scl_recovery,
+ .get_scl = octeon_i2c_get_scl,
+ .set_scl = octeon_i2c_set_scl,
+ .get_sda = octeon_i2c_get_sda,
+ .prepare_recovery = octeon_i2c_prepare_recovery,
+ .unprepare_recovery = octeon_i2c_unprepare_recovery,
+};
- for (tries = 10; tries; tries--) {
- udelay(1);
- status = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
- if (status == STAT_IDLE)
- return 0;
- }
- dev_err(i2c->dev, "%s: TWSI_RST failed! (0x%x)\n", __func__, status);
- return -EIO;
+static u32 octeon_i2c_functionality(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) |
+ I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_SMBUS_BLOCK_PROC_CALL;
}
+static const struct i2c_algorithm octeon_i2c_algo = {
+ .master_xfer = octeon_i2c_xfer,
+ .functionality = octeon_i2c_functionality,
+};
+
+static struct i2c_adapter octeon_i2c_ops = {
+ .owner = THIS_MODULE,
+ .name = "OCTEON adapter",
+ .algo = &octeon_i2c_algo,
+};
+
static int octeon_i2c_probe(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
+ int irq, result = 0, hlc_irq = 0;
struct resource *res_mem;
struct octeon_i2c *i2c;
- int irq, result = 0;
-
- /* All adaptors have an irq. */
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return irq;
+ bool cn78xx_style;
+
+ cn78xx_style = of_device_is_compatible(node, "cavium,octeon-7890-twsi");
+ if (cn78xx_style) {
+ hlc_irq = platform_get_irq(pdev, 0);
+ if (hlc_irq < 0)
+ return hlc_irq;
+
+ irq = platform_get_irq(pdev, 2);
+ if (irq < 0)
+ return irq;
+ } else {
+ /* All adaptors have an irq. */
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+ }
i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
if (!i2c) {
@@ -537,6 +1157,31 @@ static int octeon_i2c_probe(struct platform_device *pdev)
i2c->irq = irq;
+ if (cn78xx_style) {
+ i2c->hlc_irq = hlc_irq;
+
+ i2c->int_enable = octeon_i2c_int_enable78;
+ i2c->int_disable = octeon_i2c_int_disable78;
+ i2c->hlc_int_enable = octeon_i2c_hlc_int_enable78;
+ i2c->hlc_int_disable = octeon_i2c_hlc_int_disable78;
+
+ irq_set_status_flags(i2c->irq, IRQ_NOAUTOEN);
+ irq_set_status_flags(i2c->hlc_irq, IRQ_NOAUTOEN);
+
+ result = devm_request_irq(&pdev->dev, i2c->hlc_irq,
+ octeon_i2c_hlc_isr78, 0,
+ DRV_NAME, i2c);
+ if (result < 0) {
+ dev_err(i2c->dev, "failed to attach interrupt\n");
+ goto out;
+ }
+ } else {
+ i2c->int_enable = octeon_i2c_int_enable;
+ i2c->int_disable = octeon_i2c_int_disable;
+ i2c->hlc_int_enable = octeon_i2c_hlc_int_enable;
+ i2c->hlc_int_disable = octeon_i2c_int_disable;
+ }
+
result = devm_request_irq(&pdev->dev, i2c->irq,
octeon_i2c_isr, 0, DRV_NAME, i2c);
if (result < 0) {
@@ -544,6 +1189,9 @@ static int octeon_i2c_probe(struct platform_device *pdev)
goto out;
}
+ if (OCTEON_IS_MODEL(OCTEON_CN38XX))
+ i2c->broken_irq_check = true;
+
result = octeon_i2c_init_lowlevel(i2c);
if (result) {
dev_err(i2c->dev, "init low level failed\n");
@@ -553,6 +1201,9 @@ static int octeon_i2c_probe(struct platform_device *pdev)
octeon_i2c_set_clock(i2c);
i2c->adap = octeon_i2c_ops;
+ i2c->adap.timeout = msecs_to_jiffies(2);
+ i2c->adap.retries = 5;
+ i2c->adap.bus_recovery_info = &octeon_i2c_recovery_info;
i2c->adap.dev.parent = &pdev->dev;
i2c->adap.dev.of_node = node;
i2c_set_adapdata(&i2c->adap, i2c);
@@ -580,6 +1231,7 @@ static int octeon_i2c_remove(struct platform_device *pdev)
static const struct of_device_id octeon_i2c_match[] = {
{ .compatible = "cavium,octeon-3860-twsi", },
+ { .compatible = "cavium,octeon-7890-twsi", },
{},
};
MODULE_DEVICE_TABLE(of, octeon_i2c_match);
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 13c45296ce5b..ab1279b8e240 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -185,7 +185,6 @@ enum {
#define OMAP_I2C_IP_V2_INTERRUPTS_MASK 0x6FFF
struct omap_i2c_dev {
- spinlock_t lock; /* IRQ synchronization */
struct device *dev;
void __iomem *base; /* virtual */
int irq;
@@ -995,15 +994,12 @@ omap_i2c_isr(int irq, void *dev_id)
u16 mask;
u16 stat;
- spin_lock(&omap->lock);
- mask = omap_i2c_read_reg(omap, OMAP_I2C_IE_REG);
stat = omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG);
+ mask = omap_i2c_read_reg(omap, OMAP_I2C_IE_REG);
if (stat & mask)
ret = IRQ_WAKE_THREAD;
- spin_unlock(&omap->lock);
-
return ret;
}
@@ -1011,12 +1007,10 @@ static irqreturn_t
omap_i2c_isr_thread(int this_irq, void *dev_id)
{
struct omap_i2c_dev *omap = dev_id;
- unsigned long flags;
u16 bits;
u16 stat;
int err = 0, count = 0;
- spin_lock_irqsave(&omap->lock, flags);
do {
bits = omap_i2c_read_reg(omap, OMAP_I2C_IE_REG);
stat = omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG);
@@ -1142,8 +1136,6 @@ omap_i2c_isr_thread(int this_irq, void *dev_id)
omap_i2c_complete_cmd(omap, err);
out:
- spin_unlock_irqrestore(&omap->lock, flags);
-
return IRQ_HANDLED;
}
@@ -1330,8 +1322,6 @@ omap_i2c_probe(struct platform_device *pdev)
omap->dev = &pdev->dev;
omap->irq = irq;
- spin_lock_init(&omap->lock);
-
platform_set_drvdata(pdev, omap);
init_completion(&omap->cmd_complete);
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 6abcf696e359..b0d9dee14a7e 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -150,13 +150,11 @@ static int i2c_powermac_master_xfer( struct i2c_adapter *adap,
{
struct pmac_i2c_bus *bus = i2c_get_adapdata(adap);
int rc = 0;
- int read;
int addrdir;
if (msgs->flags & I2C_M_TEN)
return -EINVAL;
- read = (msgs->flags & I2C_M_RD) != 0;
- addrdir = (msgs->addr << 1) | read;
+ addrdir = i2c_8bit_addr_from_msg(msgs);
rc = pmac_i2c_open(bus, 0);
if (rc) {
diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
index 23eaabb19f96..cc6439ab3f71 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -515,7 +515,7 @@ static int qup_i2c_get_data_len(struct qup_i2c_dev *qup)
static int qup_i2c_set_tags(u8 *tags, struct qup_i2c_dev *qup,
struct i2c_msg *msg, int is_dma)
{
- u16 addr = (msg->addr << 1) | ((msg->flags & I2C_M_RD) == I2C_M_RD);
+ u16 addr = i2c_8bit_addr_from_msg(msg);
int len = 0;
int data_len;
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 68ecb5630ad5..9aca1b4e2d8d 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -21,6 +21,8 @@
*/
#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/io.h>
@@ -43,6 +45,8 @@
#define ICSAR 0x1C /* slave address */
#define ICMAR 0x20 /* master address */
#define ICRXTX 0x24 /* data port */
+#define ICDMAER 0x3c /* DMA enable */
+#define ICFBSCR 0x38 /* first bit setup cycle */
/* ICSCR */
#define SDBS (1 << 3) /* slave data buffer select */
@@ -78,6 +82,16 @@
#define MDR (1 << 1)
#define MAT (1 << 0) /* slave addr xfer done */
+/* ICDMAER */
+#define RSDMAE (1 << 3) /* DMA Slave Received Enable */
+#define TSDMAE (1 << 2) /* DMA Slave Transmitted Enable */
+#define RMDMAE (1 << 1) /* DMA Master Received Enable */
+#define TMDMAE (1 << 0) /* DMA Master Transmitted Enable */
+
+/* ICFBSCR */
+#define TCYC06 0x04 /* 6*Tcyc delay 1st bit between SDA and SCL */
+#define TCYC17 0x0f /* 17*Tcyc delay 1st bit between SDA and SCL */
+
#define RCAR_BUS_PHASE_START (MDBS | MIE | ESG)
#define RCAR_BUS_PHASE_DATA (MDBS | MIE)
@@ -120,6 +134,12 @@ struct rcar_i2c_priv {
u32 flags;
enum rcar_i2c_type devtype;
struct i2c_client *slave;
+
+ struct resource *res;
+ struct dma_chan *dma_tx;
+ struct dma_chan *dma_rx;
+ struct scatterlist sg;
+ enum dma_data_direction dma_direction;
};
#define rcar_i2c_priv_to_dev(p) ((p)->adap.dev.parent)
@@ -287,6 +307,118 @@ static void rcar_i2c_next_msg(struct rcar_i2c_priv *priv)
/*
* interrupt functions
*/
+static void rcar_i2c_dma_unmap(struct rcar_i2c_priv *priv)
+{
+ struct dma_chan *chan = priv->dma_direction == DMA_FROM_DEVICE
+ ? priv->dma_rx : priv->dma_tx;
+
+ /* Disable DMA Master Received/Transmitted */
+ rcar_i2c_write(priv, ICDMAER, 0);
+
+ /* Reset default delay */
+ rcar_i2c_write(priv, ICFBSCR, TCYC06);
+
+ dma_unmap_single(chan->device->dev, sg_dma_address(&priv->sg),
+ priv->msg->len, priv->dma_direction);
+
+ priv->dma_direction = DMA_NONE;
+}
+
+static void rcar_i2c_cleanup_dma(struct rcar_i2c_priv *priv)
+{
+ if (priv->dma_direction == DMA_NONE)
+ return;
+ else if (priv->dma_direction == DMA_FROM_DEVICE)
+ dmaengine_terminate_all(priv->dma_rx);
+ else if (priv->dma_direction == DMA_TO_DEVICE)
+ dmaengine_terminate_all(priv->dma_tx);
+
+ rcar_i2c_dma_unmap(priv);
+}
+
+static void rcar_i2c_dma_callback(void *data)
+{
+ struct rcar_i2c_priv *priv = data;
+
+ priv->pos += sg_dma_len(&priv->sg);
+
+ rcar_i2c_dma_unmap(priv);
+}
+
+static void rcar_i2c_dma(struct rcar_i2c_priv *priv)
+{
+ struct device *dev = rcar_i2c_priv_to_dev(priv);
+ struct i2c_msg *msg = priv->msg;
+ bool read = msg->flags & I2C_M_RD;
+ enum dma_data_direction dir = read ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+ struct dma_chan *chan = read ? priv->dma_rx : priv->dma_tx;
+ struct dma_async_tx_descriptor *txdesc;
+ dma_addr_t dma_addr;
+ dma_cookie_t cookie;
+ unsigned char *buf;
+ int len;
+
+ /* Do not use DMA if it's not available or for messages < 8 bytes */
+ if (IS_ERR(chan) || msg->len < 8)
+ return;
+
+ if (read) {
+ /*
+ * The last two bytes needs to be fetched using PIO in
+ * order for the STOP phase to work.
+ */
+ buf = priv->msg->buf;
+ len = priv->msg->len - 2;
+ } else {
+ /*
+ * First byte in message was sent using PIO.
+ */
+ buf = priv->msg->buf + 1;
+ len = priv->msg->len - 1;
+ }
+
+ dma_addr = dma_map_single(chan->device->dev, buf, len, dir);
+ if (dma_mapping_error(dev, dma_addr)) {
+ dev_dbg(dev, "dma map failed, using PIO\n");
+ return;
+ }
+
+ sg_dma_len(&priv->sg) = len;
+ sg_dma_address(&priv->sg) = dma_addr;
+
+ priv->dma_direction = dir;
+
+ txdesc = dmaengine_prep_slave_sg(chan, &priv->sg, 1,
+ read ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!txdesc) {
+ dev_dbg(dev, "dma prep slave sg failed, using PIO\n");
+ rcar_i2c_cleanup_dma(priv);
+ return;
+ }
+
+ txdesc->callback = rcar_i2c_dma_callback;
+ txdesc->callback_param = priv;
+
+ cookie = dmaengine_submit(txdesc);
+ if (dma_submit_error(cookie)) {
+ dev_dbg(dev, "submitting dma failed, using PIO\n");
+ rcar_i2c_cleanup_dma(priv);
+ return;
+ }
+
+ /* Set delay for DMA operations */
+ rcar_i2c_write(priv, ICFBSCR, TCYC17);
+
+ /* Enable DMA Master Received/Transmitted */
+ if (read)
+ rcar_i2c_write(priv, ICDMAER, RMDMAE);
+ else
+ rcar_i2c_write(priv, ICDMAER, TMDMAE);
+
+ dma_async_issue_pending(chan);
+}
+
static void rcar_i2c_irq_send(struct rcar_i2c_priv *priv, u32 msr)
{
struct i2c_msg *msg = priv->msg;
@@ -306,6 +438,12 @@ static void rcar_i2c_irq_send(struct rcar_i2c_priv *priv, u32 msr)
rcar_i2c_write(priv, ICRXTX, msg->buf[priv->pos]);
priv->pos++;
+ /*
+ * Try to use DMA to transmit the rest of the data if
+ * address transfer pashe just finished.
+ */
+ if (msr & MAT)
+ rcar_i2c_dma(priv);
} else {
/*
* The last data was pushed to ICRXTX on _PREV_ empty irq.
@@ -340,7 +478,11 @@ static void rcar_i2c_irq_recv(struct rcar_i2c_priv *priv, u32 msr)
return;
if (msr & MAT) {
- /* Address transfer phase finished, but no data at this point. */
+ /*
+ * Address transfer phase finished, but no data at this point.
+ * Try to use DMA to receive data.
+ */
+ rcar_i2c_dma(priv);
} else if (priv->pos < msg->len) {
/* get received data */
msg->buf[priv->pos] = rcar_i2c_read(priv, ICRXTX);
@@ -472,6 +614,81 @@ out:
return IRQ_HANDLED;
}
+static struct dma_chan *rcar_i2c_request_dma_chan(struct device *dev,
+ enum dma_transfer_direction dir,
+ dma_addr_t port_addr)
+{
+ struct dma_chan *chan;
+ struct dma_slave_config cfg;
+ char *chan_name = dir == DMA_MEM_TO_DEV ? "tx" : "rx";
+ int ret;
+
+ chan = dma_request_slave_channel_reason(dev, chan_name);
+ if (IS_ERR(chan)) {
+ ret = PTR_ERR(chan);
+ dev_dbg(dev, "request_channel failed for %s (%d)\n",
+ chan_name, ret);
+ return chan;
+ }
+
+ memset(&cfg, 0, sizeof(cfg));
+ cfg.direction = dir;
+ if (dir == DMA_MEM_TO_DEV) {
+ cfg.dst_addr = port_addr;
+ cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ } else {
+ cfg.src_addr = port_addr;
+ cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ }
+
+ ret = dmaengine_slave_config(chan, &cfg);
+ if (ret) {
+ dev_dbg(dev, "slave_config failed for %s (%d)\n",
+ chan_name, ret);
+ dma_release_channel(chan);
+ return ERR_PTR(ret);
+ }
+
+ dev_dbg(dev, "got DMA channel for %s\n", chan_name);
+ return chan;
+}
+
+static void rcar_i2c_request_dma(struct rcar_i2c_priv *priv,
+ struct i2c_msg *msg)
+{
+ struct device *dev = rcar_i2c_priv_to_dev(priv);
+ bool read;
+ struct dma_chan *chan;
+ enum dma_transfer_direction dir;
+
+ read = msg->flags & I2C_M_RD;
+
+ chan = read ? priv->dma_rx : priv->dma_tx;
+ if (PTR_ERR(chan) != -EPROBE_DEFER)
+ return;
+
+ dir = read ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV;
+ chan = rcar_i2c_request_dma_chan(dev, dir, priv->res->start + ICRXTX);
+
+ if (read)
+ priv->dma_rx = chan;
+ else
+ priv->dma_tx = chan;
+}
+
+static void rcar_i2c_release_dma(struct rcar_i2c_priv *priv)
+{
+ if (!IS_ERR(priv->dma_tx)) {
+ dma_release_channel(priv->dma_tx);
+ priv->dma_tx = ERR_PTR(-EPROBE_DEFER);
+ }
+
+ if (!IS_ERR(priv->dma_rx)) {
+ dma_release_channel(priv->dma_rx);
+ priv->dma_rx = ERR_PTR(-EPROBE_DEFER);
+ }
+}
+
static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
struct i2c_msg *msgs,
int num)
@@ -493,6 +710,7 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
ret = -EOPNOTSUPP;
goto out;
}
+ rcar_i2c_request_dma(priv, msgs + i);
}
/* init first message */
@@ -504,6 +722,7 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
time_left = wait_event_timeout(priv->wait, priv->flags & ID_DONE,
num * adap->timeout);
if (!time_left) {
+ rcar_i2c_cleanup_dma(priv);
rcar_i2c_init(priv);
ret = -ETIMEDOUT;
} else if (priv->flags & ID_NACK) {
@@ -591,7 +810,6 @@ static int rcar_i2c_probe(struct platform_device *pdev)
{
struct rcar_i2c_priv *priv;
struct i2c_adapter *adap;
- struct resource *res;
struct device *dev = &pdev->dev;
struct i2c_timings i2c_t;
int irq, ret;
@@ -606,8 +824,9 @@ static int rcar_i2c_probe(struct platform_device *pdev)
return PTR_ERR(priv->clk);
}
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- priv->io = devm_ioremap_resource(dev, res);
+ priv->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ priv->io = devm_ioremap_resource(dev, priv->res);
if (IS_ERR(priv->io))
return PTR_ERR(priv->io);
@@ -626,6 +845,11 @@ static int rcar_i2c_probe(struct platform_device *pdev)
i2c_parse_fw_timings(dev, &i2c_t, false);
+ /* Init DMA */
+ sg_init_table(&priv->sg, 1);
+ priv->dma_direction = DMA_NONE;
+ priv->dma_rx = priv->dma_tx = ERR_PTR(-EPROBE_DEFER);
+
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
ret = rcar_i2c_clock_calculate(priv, &i2c_t);
@@ -673,6 +897,7 @@ static int rcar_i2c_remove(struct platform_device *pdev)
struct device *dev = &pdev->dev;
i2c_del_adapter(&priv->adap);
+ rcar_i2c_release_dma(priv);
if (priv->flags & ID_P_PM_BLOCKED)
pm_runtime_put(dev);
pm_runtime_disable(dev);
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 3dcc5f3f26cb..80bed02cd942 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -101,10 +101,7 @@ struct rk3x_i2c {
struct notifier_block clk_rate_nb;
/* Settings */
- unsigned int scl_frequency;
- unsigned int scl_rise_ns;
- unsigned int scl_fall_ns;
- unsigned int sda_fall_ns;
+ struct i2c_timings t;
/* Synchronization & notification */
spinlock_t lock;
@@ -437,10 +434,7 @@ out:
* Calculate divider values for desired SCL frequency
*
* @clk_rate: I2C input clock rate
- * @scl_rate: Desired SCL rate
- * @scl_rise_ns: How many ns it takes for SCL to rise.
- * @scl_fall_ns: How many ns it takes for SCL to fall.
- * @sda_fall_ns: How many ns it takes for SDA to fall.
+ * @t: Known I2C timing information.
* @div_low: Divider output for low
* @div_high: Divider output for high
*
@@ -448,11 +442,10 @@ out:
* a best-effort divider value is returned in divs. If the target rate is
* too high, we silently use the highest possible rate.
*/
-static int rk3x_i2c_calc_divs(unsigned long clk_rate, unsigned long scl_rate,
- unsigned long scl_rise_ns,
- unsigned long scl_fall_ns,
- unsigned long sda_fall_ns,
- unsigned long *div_low, unsigned long *div_high)
+static int rk3x_i2c_calc_divs(unsigned long clk_rate,
+ struct i2c_timings *t,
+ unsigned long *div_low,
+ unsigned long *div_high)
{
unsigned long spec_min_low_ns, spec_min_high_ns;
unsigned long spec_setup_start, spec_max_data_hold_ns;
@@ -472,12 +465,12 @@ static int rk3x_i2c_calc_divs(unsigned long clk_rate, unsigned long scl_rate,
int ret = 0;
/* Only support standard-mode and fast-mode */
- if (WARN_ON(scl_rate > 400000))
- scl_rate = 400000;
+ if (WARN_ON(t->bus_freq_hz > 400000))
+ t->bus_freq_hz = 400000;
/* prevent scl_rate_khz from becoming 0 */
- if (WARN_ON(scl_rate < 1000))
- scl_rate = 1000;
+ if (WARN_ON(t->bus_freq_hz < 1000))
+ t->bus_freq_hz = 1000;
/*
* min_low_ns: The minimum number of ns we need to hold low to
@@ -491,7 +484,7 @@ static int rk3x_i2c_calc_divs(unsigned long clk_rate, unsigned long scl_rate,
* This is because the i2c host on Rockchip holds the data line
* for half the low time.
*/
- if (scl_rate <= 100000) {
+ if (t->bus_freq_hz <= 100000) {
/* Standard-mode */
spec_min_low_ns = 4700;
spec_setup_start = 4700;
@@ -506,7 +499,7 @@ static int rk3x_i2c_calc_divs(unsigned long clk_rate, unsigned long scl_rate,
spec_max_data_hold_ns = 900;
data_hold_buffer_ns = 50;
}
- min_high_ns = scl_rise_ns + spec_min_high_ns;
+ min_high_ns = t->scl_rise_ns + spec_min_high_ns;
/*
* Timings for repeated start:
@@ -517,18 +510,18 @@ static int rk3x_i2c_calc_divs(unsigned long clk_rate, unsigned long scl_rate,
* we meet tSU;STA and tHD;STA times.
*/
min_high_ns = max(min_high_ns,
- DIV_ROUND_UP((scl_rise_ns + spec_setup_start) * 1000, 875));
+ DIV_ROUND_UP((t->scl_rise_ns + spec_setup_start) * 1000, 875));
min_high_ns = max(min_high_ns,
- DIV_ROUND_UP((scl_rise_ns + spec_setup_start +
- sda_fall_ns + spec_min_high_ns), 2));
+ DIV_ROUND_UP((t->scl_rise_ns + spec_setup_start +
+ t->sda_fall_ns + spec_min_high_ns), 2));
- min_low_ns = scl_fall_ns + spec_min_low_ns;
+ min_low_ns = t->scl_fall_ns + spec_min_low_ns;
max_low_ns = spec_max_data_hold_ns * 2 - data_hold_buffer_ns;
min_total_ns = min_low_ns + min_high_ns;
/* Adjust to avoid overflow */
clk_rate_khz = DIV_ROUND_UP(clk_rate, 1000);
- scl_rate_khz = scl_rate / 1000;
+ scl_rate_khz = t->bus_freq_hz / 1000;
/*
* We need the total div to be >= this number
@@ -616,14 +609,13 @@ static int rk3x_i2c_calc_divs(unsigned long clk_rate, unsigned long scl_rate,
static void rk3x_i2c_adapt_div(struct rk3x_i2c *i2c, unsigned long clk_rate)
{
+ struct i2c_timings *t = &i2c->t;
unsigned long div_low, div_high;
u64 t_low_ns, t_high_ns;
int ret;
- ret = rk3x_i2c_calc_divs(clk_rate, i2c->scl_frequency, i2c->scl_rise_ns,
- i2c->scl_fall_ns, i2c->sda_fall_ns,
- &div_low, &div_high);
- WARN_ONCE(ret != 0, "Could not reach SCL freq %u", i2c->scl_frequency);
+ ret = rk3x_i2c_calc_divs(clk_rate, t, &div_low, &div_high);
+ WARN_ONCE(ret != 0, "Could not reach SCL freq %u", t->bus_freq_hz);
clk_enable(i2c->clk);
i2c_writel(i2c, (div_high << 16) | (div_low & 0xffff), REG_CLKDIV);
@@ -634,7 +626,7 @@ static void rk3x_i2c_adapt_div(struct rk3x_i2c *i2c, unsigned long clk_rate)
dev_dbg(i2c->dev,
"CLK %lukhz, Req %uns, Act low %lluns high %lluns\n",
clk_rate / 1000,
- 1000000000 / i2c->scl_frequency,
+ 1000000000 / t->bus_freq_hz,
t_low_ns, t_high_ns);
}
@@ -664,9 +656,7 @@ static int rk3x_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long
switch (event) {
case PRE_RATE_CHANGE:
- if (rk3x_i2c_calc_divs(ndata->new_rate, i2c->scl_frequency,
- i2c->scl_rise_ns, i2c->scl_fall_ns,
- i2c->sda_fall_ns,
+ if (rk3x_i2c_calc_divs(ndata->new_rate, &i2c->t,
&div_low, &div_high) != 0)
return NOTIFY_STOP;
@@ -880,37 +870,8 @@ static int rk3x_i2c_probe(struct platform_device *pdev)
match = of_match_node(rk3x_i2c_match, np);
i2c->soc_data = (struct rk3x_i2c_soc_data *)match->data;
- if (of_property_read_u32(pdev->dev.of_node, "clock-frequency",
- &i2c->scl_frequency)) {
- dev_info(&pdev->dev, "using default SCL frequency: %d\n",
- DEFAULT_SCL_RATE);
- i2c->scl_frequency = DEFAULT_SCL_RATE;
- }
-
- if (i2c->scl_frequency == 0 || i2c->scl_frequency > 400 * 1000) {
- dev_warn(&pdev->dev, "invalid SCL frequency specified.\n");
- dev_warn(&pdev->dev, "using default SCL frequency: %d\n",
- DEFAULT_SCL_RATE);
- i2c->scl_frequency = DEFAULT_SCL_RATE;
- }
-
- /*
- * Read rise and fall time from device tree. If not available use
- * the default maximum timing from the specification.
- */
- if (of_property_read_u32(pdev->dev.of_node, "i2c-scl-rising-time-ns",
- &i2c->scl_rise_ns)) {
- if (i2c->scl_frequency <= 100000)
- i2c->scl_rise_ns = 1000;
- else
- i2c->scl_rise_ns = 300;
- }
- if (of_property_read_u32(pdev->dev.of_node, "i2c-scl-falling-time-ns",
- &i2c->scl_fall_ns))
- i2c->scl_fall_ns = 300;
- if (of_property_read_u32(pdev->dev.of_node, "i2c-sda-falling-time-ns",
- &i2c->sda_fall_ns))
- i2c->sda_fall_ns = i2c->scl_fall_ns;
+ /* use common interface to get I2C timing properties */
+ i2c_parse_fw_timings(&pdev->dev, &i2c->t, true);
strlcpy(i2c->adap.name, "rk3x-i2c", sizeof(i2c->adap.name));
i2c->adap.owner = THIS_MODULE;
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 362a6de54833..38dc1cacfd8b 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -163,15 +163,14 @@ static const struct of_device_id s3c24xx_i2c_match[] = {
MODULE_DEVICE_TABLE(of, s3c24xx_i2c_match);
#endif
-/* s3c24xx_get_device_quirks
- *
+/*
* Get controller type either from device tree or platform device variant.
-*/
-
+ */
static inline kernel_ulong_t s3c24xx_get_device_quirks(struct platform_device *pdev)
{
if (pdev->dev.of_node) {
const struct of_device_id *match;
+
match = of_match_node(s3c24xx_i2c_match, pdev->dev.of_node);
return (kernel_ulong_t)match->data;
}
@@ -179,12 +178,10 @@ static inline kernel_ulong_t s3c24xx_get_device_quirks(struct platform_device *p
return platform_get_device_id(pdev)->driver_data;
}
-/* s3c24xx_i2c_master_complete
- *
- * complete the message and wake up the caller, using the given return code,
+/*
+ * Complete the message and wake up the caller, using the given return code,
* or zero to mean ok.
-*/
-
+ */
static inline void s3c24xx_i2c_master_complete(struct s3c24xx_i2c *i2c, int ret)
{
dev_dbg(i2c->dev, "master_complete %d\n", ret);
@@ -217,7 +214,6 @@ static inline void s3c24xx_i2c_enable_ack(struct s3c24xx_i2c *i2c)
}
/* irq enable/disable functions */
-
static inline void s3c24xx_i2c_disable_irq(struct s3c24xx_i2c *i2c)
{
unsigned long tmp;
@@ -251,11 +247,9 @@ static bool is_ack(struct s3c24xx_i2c *i2c)
return false;
}
-/* s3c24xx_i2c_message_start
- *
+/*
* put the start of a message onto the bus
-*/
-
+ */
static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c,
struct i2c_msg *msg)
{
@@ -284,9 +278,10 @@ static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c,
dev_dbg(i2c->dev, "START: %08lx to IICSTAT, %02x to DS\n", stat, addr);
writeb(addr, i2c->regs + S3C2410_IICDS);
- /* delay here to ensure the data byte has gotten onto the bus
- * before the transaction is started */
-
+ /*
+ * delay here to ensure the data byte has gotten onto the bus
+ * before the transaction is started
+ */
ndelay(i2c->tx_setup);
dev_dbg(i2c->dev, "iiccon, %08lx\n", iiccon);
@@ -361,50 +356,46 @@ static inline void s3c24xx_i2c_stop(struct s3c24xx_i2c *i2c, int ret)
s3c24xx_i2c_disable_irq(i2c);
}
-/* helper functions to determine the current state in the set of
- * messages we are sending */
+/*
+ * helper functions to determine the current state in the set of
+ * messages we are sending
+ */
-/* is_lastmsg()
- *
+/*
* returns TRUE if the current message is the last in the set
-*/
-
+ */
static inline int is_lastmsg(struct s3c24xx_i2c *i2c)
{
return i2c->msg_idx >= (i2c->msg_num - 1);
}
-/* is_msglast
- *
+/*
* returns TRUE if we this is the last byte in the current message
-*/
-
+ */
static inline int is_msglast(struct s3c24xx_i2c *i2c)
{
- /* msg->len is always 1 for the first byte of smbus block read.
+ /*
+ * msg->len is always 1 for the first byte of smbus block read.
* Actual length will be read from slave. More bytes will be
- * read according to the length then. */
+ * read according to the length then.
+ */
if (i2c->msg->flags & I2C_M_RECV_LEN && i2c->msg->len == 1)
return 0;
return i2c->msg_ptr == i2c->msg->len-1;
}
-/* is_msgend
- *
+/*
* returns TRUE if we reached the end of the current message
-*/
-
+ */
static inline int is_msgend(struct s3c24xx_i2c *i2c)
{
return i2c->msg_ptr >= i2c->msg->len;
}
-/* i2c_s3c_irq_nextbyte
- *
+/*
* process an interrupt and work out what to do
*/
-
static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
{
unsigned long tmp;
@@ -423,14 +414,13 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
goto out_ack;
case STATE_START:
- /* last thing we did was send a start condition on the
+ /*
+ * last thing we did was send a start condition on the
* bus, or started a new i2c message
*/
-
if (iicstat & S3C2410_IICSTAT_LASTBIT &&
!(i2c->msg->flags & I2C_M_IGNORE_NAK)) {
/* ack was not received... */
-
dev_dbg(i2c->dev, "ack was not received\n");
s3c24xx_i2c_stop(i2c, -ENXIO);
goto out_ack;
@@ -441,9 +431,10 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
else
i2c->state = STATE_WRITE;
- /* terminate the transfer if there is nothing to do
- * as this is used by the i2c probe to find devices. */
-
+ /*
+ * Terminate the transfer if there is nothing to do
+ * as this is used by the i2c probe to find devices.
+ */
if (is_lastmsg(i2c) && i2c->msg->len == 0) {
s3c24xx_i2c_stop(i2c, 0);
goto out_ack;
@@ -452,14 +443,16 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
if (i2c->state == STATE_READ)
goto prepare_read;
- /* fall through to the write state, as we will need to
- * send a byte as well */
+ /*
+ * fall through to the write state, as we will need to
+ * send a byte as well
+ */
case STATE_WRITE:
- /* we are writing data to the device... check for the
+ /*
+ * we are writing data to the device... check for the
* end of the message, and if so, work out what to do
*/
-
if (!(i2c->msg->flags & I2C_M_IGNORE_NAK)) {
if (iicstat & S3C2410_IICSTAT_LASTBIT) {
dev_dbg(i2c->dev, "WRITE: No Ack\n");
@@ -475,12 +468,13 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
byte = i2c->msg->buf[i2c->msg_ptr++];
writeb(byte, i2c->regs + S3C2410_IICDS);
- /* delay after writing the byte to allow the
+ /*
+ * delay after writing the byte to allow the
* data setup time on the bus, as writing the
* data to the register causes the first bit
* to appear on SDA, and SCL will change as
- * soon as the interrupt is acknowledged */
-
+ * soon as the interrupt is acknowledged
+ */
ndelay(i2c->tx_setup);
} else if (!is_lastmsg(i2c)) {
@@ -496,10 +490,11 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
if (i2c->msg->flags & I2C_M_NOSTART) {
if (i2c->msg->flags & I2C_M_RD) {
- /* cannot do this, the controller
+ /*
+ * cannot do this, the controller
* forces us to send a new START
- * when we change direction */
-
+ * when we change direction
+ */
s3c24xx_i2c_stop(i2c, -EINVAL);
}
@@ -512,17 +507,16 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
} else {
/* send stop */
-
s3c24xx_i2c_stop(i2c, 0);
}
break;
case STATE_READ:
- /* we have a byte of data in the data register, do
+ /*
+ * we have a byte of data in the data register, do
* something with it, and then work out whether we are
* going to do any more read/write
*/
-
byte = readb(i2c->regs + S3C2410_IICDS);
i2c->msg->buf[i2c->msg_ptr++] = byte;
@@ -537,9 +531,10 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
s3c24xx_i2c_disable_ack(i2c);
} else if (is_msgend(i2c)) {
- /* ok, we've read the entire buffer, see if there
- * is anything else we need to do */
-
+ /*
+ * ok, we've read the entire buffer, see if there
+ * is anything else we need to do
+ */
if (is_lastmsg(i2c)) {
/* last message, send stop and complete */
dev_dbg(i2c->dev, "READ: Send Stop\n");
@@ -568,11 +563,9 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
return ret;
}
-/* s3c24xx_i2c_irq
- *
+/*
* top level IRQ servicing routine
-*/
-
+ */
static irqreturn_t s3c24xx_i2c_irq(int irqno, void *dev_id)
{
struct s3c24xx_i2c *i2c = dev_id;
@@ -595,9 +588,10 @@ static irqreturn_t s3c24xx_i2c_irq(int irqno, void *dev_id)
goto out;
}
- /* pretty much this leaves us with the fact that we've
- * transmitted or received whatever byte we last sent */
-
+ /*
+ * pretty much this leaves us with the fact that we've
+ * transmitted or received whatever byte we last sent
+ */
i2c_s3c_irq_nextbyte(i2c, status);
out:
@@ -630,11 +624,9 @@ static inline void s3c24xx_i2c_disable_bus(struct s3c24xx_i2c *i2c)
}
-/* s3c24xx_i2c_set_master
- *
+/*
* get the i2c bus for a master transaction
-*/
-
+ */
static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c)
{
unsigned long iicstat;
@@ -652,11 +644,9 @@ static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c)
return -ETIMEDOUT;
}
-/* s3c24xx_i2c_wait_idle
- *
+/*
* wait for the i2c bus to become idle.
-*/
-
+ */
static void s3c24xx_i2c_wait_idle(struct s3c24xx_i2c *i2c)
{
unsigned long iicstat;
@@ -706,11 +696,9 @@ static void s3c24xx_i2c_wait_idle(struct s3c24xx_i2c *i2c)
dev_warn(i2c->dev, "timeout waiting for bus idle\n");
}
-/* s3c24xx_i2c_doxfer
- *
+/*
* this starts an i2c transfer
-*/
-
+ */
static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
struct i2c_msg *msgs, int num)
{
@@ -749,9 +737,10 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
ret = i2c->msg_idx;
- /* having these next two as dev_err() makes life very
- * noisy when doing an i2cdetect */
-
+ /*
+ * Having these next two as dev_err() makes life very
+ * noisy when doing an i2cdetect
+ */
if (timeout == 0)
dev_dbg(i2c->dev, "timeout\n");
else if (ret != num)
@@ -771,12 +760,10 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
return ret;
}
-/* s3c24xx_i2c_xfer
- *
+/*
* first port of call from the i2c bus code when an message needs
* transferring across the i2c bus.
-*/
-
+ */
static int s3c24xx_i2c_xfer(struct i2c_adapter *adap,
struct i2c_msg *msgs, int num)
{
@@ -814,17 +801,14 @@ static u32 s3c24xx_i2c_func(struct i2c_adapter *adap)
}
/* i2c bus registration info */
-
static const struct i2c_algorithm s3c24xx_i2c_algorithm = {
.master_xfer = s3c24xx_i2c_xfer,
.functionality = s3c24xx_i2c_func,
};
-/* s3c24xx_i2c_calcdivisor
- *
+/*
* return the divisor settings for a given frequency
-*/
-
+ */
static int s3c24xx_i2c_calcdivisor(unsigned long clkin, unsigned int wanted,
unsigned int *div1, unsigned int *divs)
{
@@ -850,13 +834,11 @@ static int s3c24xx_i2c_calcdivisor(unsigned long clkin, unsigned int wanted,
return clkin / (calc_divs * calc_div1);
}
-/* s3c24xx_i2c_clockrate
- *
+/*
* work out a divisor for the user requested frequency setting,
* either by the requested frequency, or scanning the acceptable
* range of frequencies until something is found
-*/
-
+ */
static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
{
struct s3c2410_platform_i2c *pdata = i2c->pdata;
@@ -944,7 +926,7 @@ static int s3c24xx_i2c_cpufreq_transition(struct notifier_block *nb,
i2c_unlock_adapter(&i2c->adap);
if (ret < 0)
- dev_err(i2c->dev, "cannot find frequency\n");
+ dev_err(i2c->dev, "cannot find frequency (%d)\n", ret);
else
dev_info(i2c->dev, "setting freq %d\n", got);
}
@@ -995,7 +977,8 @@ static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c)
ret = gpio_request(gpio, "i2c-bus");
if (ret) {
- dev_err(i2c->dev, "gpio [%d] request failed\n", gpio);
+ dev_err(i2c->dev, "gpio [%d] request failed (%d)\n",
+ gpio, ret);
goto free_gpio;
}
}
@@ -1028,11 +1011,9 @@ static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c)
}
#endif
-/* s3c24xx_i2c_init
- *
+/*
* initialise the controller, set the IO lines and frequency
-*/
-
+ */
static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
{
struct s3c2410_platform_i2c *pdata;
@@ -1068,11 +1049,9 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
}
#ifdef CONFIG_OF
-/* s3c24xx_i2c_parse_dt
- *
+/*
* Parse the device tree node and retreive the platform data.
-*/
-
+ */
static void
s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c)
{
@@ -1105,17 +1084,9 @@ s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c)
}
#else
static void
-s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c)
-{
- return;
-}
+s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c) { }
#endif
-/* s3c24xx_i2c_probe
- *
- * called by the bus driver when a suitable device is found
-*/
-
static int s3c24xx_i2c_probe(struct platform_device *pdev)
{
struct s3c24xx_i2c *i2c;
@@ -1156,7 +1127,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
init_waitqueue_head(&i2c->wait);
/* find the clock and enable it */
-
i2c->dev = &pdev->dev;
i2c->clk = devm_clk_get(&pdev->dev, "i2c");
if (IS_ERR(i2c->clk)) {
@@ -1166,9 +1136,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
dev_dbg(&pdev->dev, "clock source %p\n", i2c->clk);
-
/* map the registers */
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
i2c->regs = devm_ioremap_resource(&pdev->dev, res);
@@ -1179,33 +1147,35 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
i2c->regs, res);
/* setup info block for the i2c core */
-
i2c->adap.algo_data = i2c;
i2c->adap.dev.parent = &pdev->dev;
-
i2c->pctrl = devm_pinctrl_get_select_default(i2c->dev);
/* inititalise the i2c gpio lines */
-
- if (i2c->pdata->cfg_gpio) {
+ if (i2c->pdata->cfg_gpio)
i2c->pdata->cfg_gpio(to_platform_device(i2c->dev));
- } else if (IS_ERR(i2c->pctrl) && s3c24xx_i2c_parse_dt_gpio(i2c)) {
+ else if (IS_ERR(i2c->pctrl) && s3c24xx_i2c_parse_dt_gpio(i2c))
return -EINVAL;
- }
/* initialise the i2c controller */
+ ret = clk_prepare_enable(i2c->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "I2C clock enable failed\n");
+ return ret;
+ }
- clk_prepare_enable(i2c->clk);
ret = s3c24xx_i2c_init(i2c);
clk_disable(i2c->clk);
if (ret != 0) {
dev_err(&pdev->dev, "I2C controller init failed\n");
+ clk_unprepare(i2c->clk);
return ret;
}
- /* find the IRQ for this unit (note, this relies on the init call to
+
+ /*
+ * find the IRQ for this unit (note, this relies on the init call to
* ensure no current IRQs pending
*/
-
if (!(i2c->quirks & QUIRK_POLL)) {
i2c->irq = ret = platform_get_irq(pdev, 0);
if (ret <= 0) {
@@ -1214,9 +1184,8 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
return ret;
}
- ret = devm_request_irq(&pdev->dev, i2c->irq, s3c24xx_i2c_irq, 0,
- dev_name(&pdev->dev), i2c);
-
+ ret = devm_request_irq(&pdev->dev, i2c->irq, s3c24xx_i2c_irq,
+ 0, dev_name(&pdev->dev), i2c);
if (ret != 0) {
dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq);
clk_unprepare(i2c->clk);
@@ -1231,12 +1200,12 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
return ret;
}
- /* Note, previous versions of the driver used i2c_add_adapter()
+ /*
+ * Note, previous versions of the driver used i2c_add_adapter()
* to add the bus at any number. We now pass the bus number via
* the platform data, so if unset it will now default to always
* being bus 0.
*/
-
i2c->adap.nr = i2c->pdata->bus_num;
i2c->adap.dev.of_node = pdev->dev.of_node;
@@ -1257,11 +1226,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
return 0;
}
-/* s3c24xx_i2c_remove
- *
- * called when device is removed from the bus
-*/
-
static int s3c24xx_i2c_remove(struct platform_device *pdev)
{
struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
@@ -1316,14 +1280,8 @@ static int s3c24xx_i2c_resume_noirq(struct device *dev)
#ifdef CONFIG_PM
static const struct dev_pm_ops s3c24xx_i2c_dev_pm_ops = {
-#ifdef CONFIG_PM_SLEEP
- .suspend_noirq = s3c24xx_i2c_suspend_noirq,
- .resume_noirq = s3c24xx_i2c_resume_noirq,
- .freeze_noirq = s3c24xx_i2c_suspend_noirq,
- .thaw_noirq = s3c24xx_i2c_resume_noirq,
- .poweroff_noirq = s3c24xx_i2c_suspend_noirq,
- .restore_noirq = s3c24xx_i2c_resume_noirq,
-#endif
+ SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(s3c24xx_i2c_suspend_noirq,
+ s3c24xx_i2c_resume_noirq)
};
#define S3C24XX_DEV_PM_OPS (&s3c24xx_i2c_dev_pm_ops)
@@ -1331,8 +1289,6 @@ static const struct dev_pm_ops s3c24xx_i2c_dev_pm_ops = {
#define S3C24XX_DEV_PM_OPS NULL
#endif
-/* device driver for platform bus bits */
-
static struct platform_driver s3c24xx_i2c_driver = {
.probe = s3c24xx_i2c_probe,
.remove = s3c24xx_i2c_remove,
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 7d2bd3ec2d2d..6fb3e2645992 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -398,8 +398,7 @@ static void sh_mobile_i2c_get_data(struct sh_mobile_i2c_data *pd,
{
switch (pd->pos) {
case -1:
- *buf = (pd->msg->addr & 0x7f) << 1;
- *buf |= (pd->msg->flags & I2C_M_RD) ? 1 : 0;
+ *buf = i2c_8bit_addr_from_msg(pd->msg);
break;
default:
*buf = pd->msg->buf[pd->pos];
diff --git a/drivers/i2c/busses/i2c-sirf.c b/drivers/i2c/busses/i2c-sirf.c
index 13e51ef6af73..792a42bdd335 100644
--- a/drivers/i2c/busses/i2c-sirf.c
+++ b/drivers/i2c/busses/i2c-sirf.c
@@ -190,9 +190,7 @@ static void i2c_sirfsoc_set_address(struct sirfsoc_i2c *siic,
writel(regval, siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++));
- addr = msg->addr << 1; /* Generate address */
- if (msg->flags & I2C_M_RD)
- addr |= 1;
+ addr = i2c_8bit_addr_from_msg(msg);
/* Reverse direction bit */
if (msg->flags & I2C_M_REV_DIR_ADDR)
diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c
index 6ee77159ac57..944ec4205084 100644
--- a/drivers/i2c/busses/i2c-st.c
+++ b/drivers/i2c/busses/i2c-st.c
@@ -337,10 +337,42 @@ static void st_i2c_hw_config(struct st_i2c_dev *i2c_dev)
writel_relaxed(val, i2c_dev->base + SSC_NOISE_SUPP_WIDTH_DATAOUT);
}
+static int st_i2c_recover_bus(struct i2c_adapter *i2c_adap)
+{
+ struct st_i2c_dev *i2c_dev = i2c_get_adapdata(i2c_adap);
+ u32 ctl;
+
+ dev_dbg(i2c_dev->dev, "Trying to recover bus\n");
+
+ /*
+ * SSP IP is dual role SPI/I2C to generate 9 clock pulses
+ * we switch to SPI node, 9 bit words and write a 0. This
+ * has been validate with a oscilloscope and is easier
+ * than switching to GPIO mode.
+ */
+
+ /* Disable interrupts */
+ writel_relaxed(0, i2c_dev->base + SSC_IEN);
+
+ st_i2c_hw_config(i2c_dev);
+
+ ctl = SSC_CTL_EN | SSC_CTL_MS | SSC_CTL_EN_RX_FIFO | SSC_CTL_EN_TX_FIFO;
+ st_i2c_set_bits(i2c_dev->base + SSC_CTL, ctl);
+
+ st_i2c_clr_bits(i2c_dev->base + SSC_I2C, SSC_I2C_I2CM);
+ usleep_range(8000, 10000);
+
+ writel_relaxed(0, i2c_dev->base + SSC_TBUF);
+ usleep_range(2000, 4000);
+ st_i2c_set_bits(i2c_dev->base + SSC_I2C, SSC_I2C_I2CM);
+
+ return 0;
+}
+
static int st_i2c_wait_free_bus(struct st_i2c_dev *i2c_dev)
{
u32 sta;
- int i;
+ int i, ret;
for (i = 0; i < 10; i++) {
sta = readl_relaxed(i2c_dev->base + SSC_STA);
@@ -352,6 +384,12 @@ static int st_i2c_wait_free_bus(struct st_i2c_dev *i2c_dev)
dev_err(i2c_dev->dev, "bus not free (status = 0x%08x)\n", sta);
+ ret = i2c_recover_bus(&i2c_dev->adap);
+ if (ret) {
+ dev_err(i2c_dev->dev, "Failed to recover the bus (%d)\n", ret);
+ return ret;
+ }
+
return -EBUSY;
}
@@ -614,8 +652,7 @@ static int st_i2c_xfer_msg(struct st_i2c_dev *i2c_dev, struct i2c_msg *msg,
unsigned long timeout;
int ret;
- c->addr = (u8)(msg->addr << 1);
- c->addr |= (msg->flags & I2C_M_RD);
+ c->addr = i2c_8bit_addr_from_msg(msg);
c->buf = msg->buf;
c->count = msg->len;
c->xfered = 0;
@@ -744,6 +781,10 @@ static struct i2c_algorithm st_i2c_algo = {
.functionality = st_i2c_func,
};
+static struct i2c_bus_recovery_info st_i2c_recovery_info = {
+ .recover_bus = st_i2c_recover_bus,
+};
+
static int st_i2c_of_get_deglitch(struct device_node *np,
struct st_i2c_dev *i2c_dev)
{
@@ -826,6 +867,7 @@ static int st_i2c_probe(struct platform_device *pdev)
adap->timeout = 2 * HZ;
adap->retries = 0;
adap->algo = &st_i2c_algo;
+ adap->bus_recovery_info = &st_i2c_recovery_info;
adap->dev.parent = &pdev->dev;
adap->dev.of_node = pdev->dev.of_node;
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 929185a7296c..445398c314a3 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -38,6 +38,7 @@
#define I2C_CNFG_DEBOUNCE_CNT_SHIFT 12
#define I2C_CNFG_PACKET_MODE_EN (1<<10)
#define I2C_CNFG_NEW_MASTER_FSM (1<<11)
+#define I2C_CNFG_MULTI_MASTER_MODE (1<<17)
#define I2C_STATUS 0x01C
#define I2C_SL_CNFG 0x020
#define I2C_SL_CNFG_NACK (1<<1)
@@ -106,6 +107,9 @@
#define I2C_SLV_CONFIG_LOAD (1 << 1)
#define I2C_TIMEOUT_CONFIG_LOAD (1 << 2)
+#define I2C_CLKEN_OVERRIDE 0x090
+#define I2C_MST_CORE_CLKEN_OVR (1 << 0)
+
/*
* msg_end_type: The bus control which need to be send at end of transfer.
* @MSG_END_STOP: Send stop pulse at end of transfer.
@@ -143,6 +147,8 @@ struct tegra_i2c_hw_feature {
int clk_divisor_hs_mode;
int clk_divisor_std_fast_mode;
u16 clk_divisor_fast_plus_mode;
+ bool has_multi_master_mode;
+ bool has_slcg_override_reg;
};
/**
@@ -184,6 +190,7 @@ struct tegra_i2c_dev {
u32 bus_clk_rate;
u16 clk_divisor_non_hs_mode;
bool is_suspended;
+ bool is_multimaster_mode;
};
static void dvc_writel(struct tegra_i2c_dev *i2c_dev, u32 val, unsigned long reg)
@@ -438,6 +445,10 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
val = I2C_CNFG_NEW_MASTER_FSM | I2C_CNFG_PACKET_MODE_EN |
(0x2 << I2C_CNFG_DEBOUNCE_CNT_SHIFT);
+
+ if (i2c_dev->hw->has_multi_master_mode)
+ val |= I2C_CNFG_MULTI_MASTER_MODE;
+
i2c_writel(i2c_dev, val, I2C_CNFG);
i2c_writel(i2c_dev, 0, I2C_INT_MASK);
@@ -463,25 +474,29 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
if (tegra_i2c_flush_fifos(i2c_dev))
err = -ETIMEDOUT;
+ if (i2c_dev->is_multimaster_mode && i2c_dev->hw->has_slcg_override_reg)
+ i2c_writel(i2c_dev, I2C_MST_CORE_CLKEN_OVR, I2C_CLKEN_OVERRIDE);
+
if (i2c_dev->hw->has_config_load_reg) {
i2c_writel(i2c_dev, I2C_MSTR_CONFIG_LOAD, I2C_CONFIG_LOAD);
while (i2c_readl(i2c_dev, I2C_CONFIG_LOAD) != 0) {
if (time_after(jiffies, timeout)) {
dev_warn(i2c_dev->dev,
"timeout waiting for config load\n");
- return -ETIMEDOUT;
+ err = -ETIMEDOUT;
+ goto err;
}
msleep(1);
}
}
- tegra_i2c_clock_disable(i2c_dev);
-
if (i2c_dev->irq_disabled) {
i2c_dev->irq_disabled = 0;
enable_irq(i2c_dev->irq);
}
+err:
+ tegra_i2c_clock_disable(i2c_dev);
return err;
}
@@ -688,6 +703,20 @@ static u32 tegra_i2c_func(struct i2c_adapter *adap)
return ret;
}
+static void tegra_i2c_parse_dt(struct tegra_i2c_dev *i2c_dev)
+{
+ struct device_node *np = i2c_dev->dev->of_node;
+ int ret;
+
+ ret = of_property_read_u32(np, "clock-frequency",
+ &i2c_dev->bus_clk_rate);
+ if (ret)
+ i2c_dev->bus_clk_rate = 100000; /* default clock rate */
+
+ i2c_dev->is_multimaster_mode = of_property_read_bool(np,
+ "multi-master");
+}
+
static const struct i2c_algorithm tegra_i2c_algo = {
.master_xfer = tegra_i2c_xfer,
.functionality = tegra_i2c_func,
@@ -707,6 +736,8 @@ static const struct tegra_i2c_hw_feature tegra20_i2c_hw = {
.clk_divisor_std_fast_mode = 0,
.clk_divisor_fast_plus_mode = 0,
.has_config_load_reg = false,
+ .has_multi_master_mode = false,
+ .has_slcg_override_reg = false,
};
static const struct tegra_i2c_hw_feature tegra30_i2c_hw = {
@@ -717,6 +748,8 @@ static const struct tegra_i2c_hw_feature tegra30_i2c_hw = {
.clk_divisor_std_fast_mode = 0,
.clk_divisor_fast_plus_mode = 0,
.has_config_load_reg = false,
+ .has_multi_master_mode = false,
+ .has_slcg_override_reg = false,
};
static const struct tegra_i2c_hw_feature tegra114_i2c_hw = {
@@ -727,6 +760,8 @@ static const struct tegra_i2c_hw_feature tegra114_i2c_hw = {
.clk_divisor_std_fast_mode = 0x19,
.clk_divisor_fast_plus_mode = 0x10,
.has_config_load_reg = false,
+ .has_multi_master_mode = false,
+ .has_slcg_override_reg = false,
};
static const struct tegra_i2c_hw_feature tegra124_i2c_hw = {
@@ -737,10 +772,25 @@ static const struct tegra_i2c_hw_feature tegra124_i2c_hw = {
.clk_divisor_std_fast_mode = 0x19,
.clk_divisor_fast_plus_mode = 0x10,
.has_config_load_reg = true,
+ .has_multi_master_mode = false,
+ .has_slcg_override_reg = true,
+};
+
+static const struct tegra_i2c_hw_feature tegra210_i2c_hw = {
+ .has_continue_xfer_support = true,
+ .has_per_pkt_xfer_complete_irq = true,
+ .has_single_clk_source = true,
+ .clk_divisor_hs_mode = 1,
+ .clk_divisor_std_fast_mode = 0x19,
+ .clk_divisor_fast_plus_mode = 0x10,
+ .has_config_load_reg = true,
+ .has_multi_master_mode = true,
+ .has_slcg_override_reg = true,
};
/* Match table for of_platform binding */
static const struct of_device_id tegra_i2c_of_match[] = {
+ { .compatible = "nvidia,tegra210-i2c", .data = &tegra210_i2c_hw, },
{ .compatible = "nvidia,tegra124-i2c", .data = &tegra124_i2c_hw, },
{ .compatible = "nvidia,tegra114-i2c", .data = &tegra114_i2c_hw, },
{ .compatible = "nvidia,tegra30-i2c", .data = &tegra30_i2c_hw, },
@@ -797,10 +847,7 @@ static int tegra_i2c_probe(struct platform_device *pdev)
return PTR_ERR(i2c_dev->rst);
}
- ret = of_property_read_u32(i2c_dev->dev->of_node, "clock-frequency",
- &i2c_dev->bus_clk_rate);
- if (ret)
- i2c_dev->bus_clk_rate = 100000; /* default clock rate */
+ tegra_i2c_parse_dt(i2c_dev);
i2c_dev->hw = &tegra20_i2c_hw;
@@ -853,6 +900,15 @@ static int tegra_i2c_probe(struct platform_device *pdev)
goto unprepare_fast_clk;
}
+ if (i2c_dev->is_multimaster_mode) {
+ ret = clk_enable(i2c_dev->div_clk);
+ if (ret < 0) {
+ dev_err(i2c_dev->dev, "div_clk enable failed %d\n",
+ ret);
+ goto unprepare_div_clk;
+ }
+ }
+
ret = tegra_i2c_init(i2c_dev);
if (ret) {
dev_err(&pdev->dev, "Failed to initialize i2c controller");
@@ -863,7 +919,7 @@ static int tegra_i2c_probe(struct platform_device *pdev)
tegra_i2c_isr, 0, dev_name(&pdev->dev), i2c_dev);
if (ret) {
dev_err(&pdev->dev, "Failed to request irq %i\n", i2c_dev->irq);
- goto unprepare_div_clk;
+ goto disable_div_clk;
}
i2c_set_adapdata(&i2c_dev->adapter, i2c_dev);
@@ -878,11 +934,15 @@ static int tegra_i2c_probe(struct platform_device *pdev)
ret = i2c_add_numbered_adapter(&i2c_dev->adapter);
if (ret) {
dev_err(&pdev->dev, "Failed to add I2C adapter\n");
- goto unprepare_div_clk;
+ goto disable_div_clk;
}
return 0;
+disable_div_clk:
+ if (i2c_dev->is_multimaster_mode)
+ clk_disable(i2c_dev->div_clk);
+
unprepare_div_clk:
clk_unprepare(i2c_dev->div_clk);
@@ -898,6 +958,9 @@ static int tegra_i2c_remove(struct platform_device *pdev)
struct tegra_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
i2c_del_adapter(&i2c_dev->adapter);
+ if (i2c_dev->is_multimaster_mode)
+ clk_disable(i2c_dev->div_clk);
+
clk_unprepare(i2c_dev->div_clk);
if (!i2c_dev->hw->has_single_clk_source)
clk_unprepare(i2c_dev->fast_clk);
diff --git a/drivers/i2c/busses/i2c-uniphier-f.c b/drivers/i2c/busses/i2c-uniphier-f.c
index 213ba55e17c3..aeead0d27d10 100644
--- a/drivers/i2c/busses/i2c-uniphier-f.c
+++ b/drivers/i2c/busses/i2c-uniphier-f.c
@@ -524,7 +524,7 @@ static int uniphier_fi2c_probe(struct platform_device *pdev)
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
- dev_err(dev, "failed to get IRQ number");
+ dev_err(dev, "failed to get IRQ number\n");
return irq;
}
diff --git a/drivers/i2c/busses/i2c-uniphier.c b/drivers/i2c/busses/i2c-uniphier.c
index 89eaa8a7e1e0..475a5eb514e2 100644
--- a/drivers/i2c/busses/i2c-uniphier.c
+++ b/drivers/i2c/busses/i2c-uniphier.c
@@ -381,7 +381,7 @@ static int uniphier_i2c_probe(struct platform_device *pdev)
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
- dev_err(dev, "failed to get IRQ number");
+ dev_err(dev, "failed to get IRQ number\n");
return irq;
}
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index e584d88ee337..af11b658984d 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -954,48 +954,40 @@ static int i2c_check_addr_busy(struct i2c_adapter *adapter, int addr)
}
/**
- * i2c_lock_adapter - Get exclusive access to an I2C bus segment
+ * i2c_adapter_lock_bus - Get exclusive access to an I2C bus segment
* @adapter: Target I2C bus segment
+ * @flags: I2C_LOCK_ROOT_ADAPTER locks the root i2c adapter, I2C_LOCK_SEGMENT
+ * locks only this branch in the adapter tree
*/
-void i2c_lock_adapter(struct i2c_adapter *adapter)
+static void i2c_adapter_lock_bus(struct i2c_adapter *adapter,
+ unsigned int flags)
{
- struct i2c_adapter *parent = i2c_parent_is_i2c_adapter(adapter);
-
- if (parent)
- i2c_lock_adapter(parent);
- else
- rt_mutex_lock(&adapter->bus_lock);
+ rt_mutex_lock(&adapter->bus_lock);
}
-EXPORT_SYMBOL_GPL(i2c_lock_adapter);
/**
- * i2c_trylock_adapter - Try to get exclusive access to an I2C bus segment
+ * i2c_adapter_trylock_bus - Try to get exclusive access to an I2C bus segment
* @adapter: Target I2C bus segment
+ * @flags: I2C_LOCK_ROOT_ADAPTER trylocks the root i2c adapter, I2C_LOCK_SEGMENT
+ * trylocks only this branch in the adapter tree
*/
-static int i2c_trylock_adapter(struct i2c_adapter *adapter)
+static int i2c_adapter_trylock_bus(struct i2c_adapter *adapter,
+ unsigned int flags)
{
- struct i2c_adapter *parent = i2c_parent_is_i2c_adapter(adapter);
-
- if (parent)
- return i2c_trylock_adapter(parent);
- else
- return rt_mutex_trylock(&adapter->bus_lock);
+ return rt_mutex_trylock(&adapter->bus_lock);
}
/**
- * i2c_unlock_adapter - Release exclusive access to an I2C bus segment
+ * i2c_adapter_unlock_bus - Release exclusive access to an I2C bus segment
* @adapter: Target I2C bus segment
+ * @flags: I2C_LOCK_ROOT_ADAPTER unlocks the root i2c adapter, I2C_LOCK_SEGMENT
+ * unlocks only this branch in the adapter tree
*/
-void i2c_unlock_adapter(struct i2c_adapter *adapter)
+static void i2c_adapter_unlock_bus(struct i2c_adapter *adapter,
+ unsigned int flags)
{
- struct i2c_adapter *parent = i2c_parent_is_i2c_adapter(adapter);
-
- if (parent)
- i2c_unlock_adapter(parent);
- else
- rt_mutex_unlock(&adapter->bus_lock);
+ rt_mutex_unlock(&adapter->bus_lock);
}
-EXPORT_SYMBOL_GPL(i2c_unlock_adapter);
static void i2c_dev_set_name(struct i2c_adapter *adap,
struct i2c_client *client)
@@ -1541,7 +1533,14 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
return -EINVAL;
}
+ if (!adap->lock_bus) {
+ adap->lock_bus = i2c_adapter_lock_bus;
+ adap->trylock_bus = i2c_adapter_trylock_bus;
+ adap->unlock_bus = i2c_adapter_unlock_bus;
+ }
+
rt_mutex_init(&adap->bus_lock);
+ rt_mutex_init(&adap->mux_lock);
mutex_init(&adap->userspace_clients_lock);
INIT_LIST_HEAD(&adap->userspace_clients);
@@ -1559,6 +1558,7 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name);
pm_runtime_no_callbacks(&adap->dev);
+ pm_suspend_ignore_children(&adap->dev, true);
pm_runtime_enable(&adap->dev);
#ifdef CONFIG_I2C_COMPAT
@@ -1594,10 +1594,12 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
bri->get_scl = get_scl_gpio_value;
bri->set_scl = set_scl_gpio_value;
- } else if (!bri->set_scl || !bri->get_scl) {
+ } else if (bri->recover_bus == i2c_generic_scl_recovery) {
/* Generic SCL recovery */
- dev_err(&adap->dev, "No {get|set}_gpio() found, not using recovery\n");
- adap->bus_recovery_info = NULL;
+ if (!bri->set_scl || !bri->get_scl) {
+ dev_err(&adap->dev, "No {get|set}_scl() found, not using recovery\n");
+ adap->bus_recovery_info = NULL;
+ }
}
}
@@ -2309,16 +2311,16 @@ int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
#endif
if (in_atomic() || irqs_disabled()) {
- ret = i2c_trylock_adapter(adap);
+ ret = adap->trylock_bus(adap, I2C_LOCK_SEGMENT);
if (!ret)
/* I2C activity is ongoing. */
return -EAGAIN;
} else {
- i2c_lock_adapter(adap);
+ i2c_lock_bus(adap, I2C_LOCK_SEGMENT);
}
ret = __i2c_transfer(adap, msgs, num);
- i2c_unlock_adapter(adap);
+ i2c_unlock_bus(adap, I2C_LOCK_SEGMENT);
return ret;
} else {
@@ -2646,7 +2648,7 @@ static u8 i2c_smbus_pec(u8 crc, u8 *p, size_t count)
static u8 i2c_smbus_msg_pec(u8 pec, struct i2c_msg *msg)
{
/* The address will be sent first */
- u8 addr = (msg->addr << 1) | !!(msg->flags & I2C_M_RD);
+ u8 addr = i2c_8bit_addr_from_msg(msg);
pec = i2c_smbus_pec(pec, &addr, 1);
/* The data buffer follows */
@@ -3093,7 +3095,7 @@ s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags,
flags &= I2C_M_TEN | I2C_CLIENT_PEC | I2C_CLIENT_SCCB;
if (adapter->algo->smbus_xfer) {
- i2c_lock_adapter(adapter);
+ i2c_lock_bus(adapter, I2C_LOCK_SEGMENT);
/* Retry automatically on arbitration loss */
orig_jiffies = jiffies;
@@ -3107,7 +3109,7 @@ s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags,
orig_jiffies + adapter->timeout))
break;
}
- i2c_unlock_adapter(adapter);
+ i2c_unlock_bus(adapter, I2C_LOCK_SEGMENT);
if (res != -EOPNOTSUPP || !adapter->algo->master_xfer)
goto trace;
diff --git a/drivers/i2c/i2c-mux.c b/drivers/i2c/i2c-mux.c
index d4022878b2f0..8eee98634cda 100644
--- a/drivers/i2c/i2c-mux.c
+++ b/drivers/i2c/i2c-mux.c
@@ -31,30 +31,66 @@
struct i2c_mux_priv {
struct i2c_adapter adap;
struct i2c_algorithm algo;
-
- struct i2c_adapter *parent;
- struct device *mux_dev;
- void *mux_priv;
+ struct i2c_mux_core *muxc;
u32 chan_id;
-
- int (*select)(struct i2c_adapter *, void *mux_priv, u32 chan_id);
- int (*deselect)(struct i2c_adapter *, void *mux_priv, u32 chan_id);
};
+static int __i2c_mux_master_xfer(struct i2c_adapter *adap,
+ struct i2c_msg msgs[], int num)
+{
+ struct i2c_mux_priv *priv = adap->algo_data;
+ struct i2c_mux_core *muxc = priv->muxc;
+ struct i2c_adapter *parent = muxc->parent;
+ int ret;
+
+ /* Switch to the right mux port and perform the transfer. */
+
+ ret = muxc->select(muxc, priv->chan_id);
+ if (ret >= 0)
+ ret = __i2c_transfer(parent, msgs, num);
+ if (muxc->deselect)
+ muxc->deselect(muxc, priv->chan_id);
+
+ return ret;
+}
+
static int i2c_mux_master_xfer(struct i2c_adapter *adap,
struct i2c_msg msgs[], int num)
{
struct i2c_mux_priv *priv = adap->algo_data;
- struct i2c_adapter *parent = priv->parent;
+ struct i2c_mux_core *muxc = priv->muxc;
+ struct i2c_adapter *parent = muxc->parent;
int ret;
/* Switch to the right mux port and perform the transfer. */
- ret = priv->select(parent, priv->mux_priv, priv->chan_id);
+ ret = muxc->select(muxc, priv->chan_id);
if (ret >= 0)
- ret = __i2c_transfer(parent, msgs, num);
- if (priv->deselect)
- priv->deselect(parent, priv->mux_priv, priv->chan_id);
+ ret = i2c_transfer(parent, msgs, num);
+ if (muxc->deselect)
+ muxc->deselect(muxc, priv->chan_id);
+
+ return ret;
+}
+
+static int __i2c_mux_smbus_xfer(struct i2c_adapter *adap,
+ u16 addr, unsigned short flags,
+ char read_write, u8 command,
+ int size, union i2c_smbus_data *data)
+{
+ struct i2c_mux_priv *priv = adap->algo_data;
+ struct i2c_mux_core *muxc = priv->muxc;
+ struct i2c_adapter *parent = muxc->parent;
+ int ret;
+
+ /* Select the right mux port and perform the transfer. */
+
+ ret = muxc->select(muxc, priv->chan_id);
+ if (ret >= 0)
+ ret = parent->algo->smbus_xfer(parent, addr, flags,
+ read_write, command, size, data);
+ if (muxc->deselect)
+ muxc->deselect(muxc, priv->chan_id);
return ret;
}
@@ -65,17 +101,18 @@ static int i2c_mux_smbus_xfer(struct i2c_adapter *adap,
int size, union i2c_smbus_data *data)
{
struct i2c_mux_priv *priv = adap->algo_data;
- struct i2c_adapter *parent = priv->parent;
+ struct i2c_mux_core *muxc = priv->muxc;
+ struct i2c_adapter *parent = muxc->parent;
int ret;
/* Select the right mux port and perform the transfer. */
- ret = priv->select(parent, priv->mux_priv, priv->chan_id);
+ ret = muxc->select(muxc, priv->chan_id);
if (ret >= 0)
- ret = parent->algo->smbus_xfer(parent, addr, flags,
- read_write, command, size, data);
- if (priv->deselect)
- priv->deselect(parent, priv->mux_priv, priv->chan_id);
+ ret = i2c_smbus_xfer(parent, addr, flags,
+ read_write, command, size, data);
+ if (muxc->deselect)
+ muxc->deselect(muxc, priv->chan_id);
return ret;
}
@@ -84,7 +121,7 @@ static int i2c_mux_smbus_xfer(struct i2c_adapter *adap,
static u32 i2c_mux_functionality(struct i2c_adapter *adap)
{
struct i2c_mux_priv *priv = adap->algo_data;
- struct i2c_adapter *parent = priv->parent;
+ struct i2c_adapter *parent = priv->muxc->parent;
return parent->algo->functionality(parent);
}
@@ -102,38 +139,167 @@ static unsigned int i2c_mux_parent_classes(struct i2c_adapter *parent)
return class;
}
-struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent,
- struct device *mux_dev,
- void *mux_priv, u32 force_nr, u32 chan_id,
- unsigned int class,
- int (*select) (struct i2c_adapter *,
- void *, u32),
- int (*deselect) (struct i2c_adapter *,
- void *, u32))
+static void i2c_mux_lock_bus(struct i2c_adapter *adapter, unsigned int flags)
+{
+ struct i2c_mux_priv *priv = adapter->algo_data;
+ struct i2c_adapter *parent = priv->muxc->parent;
+
+ rt_mutex_lock(&parent->mux_lock);
+ if (!(flags & I2C_LOCK_ROOT_ADAPTER))
+ return;
+ i2c_lock_bus(parent, flags);
+}
+
+static int i2c_mux_trylock_bus(struct i2c_adapter *adapter, unsigned int flags)
+{
+ struct i2c_mux_priv *priv = adapter->algo_data;
+ struct i2c_adapter *parent = priv->muxc->parent;
+
+ if (!rt_mutex_trylock(&parent->mux_lock))
+ return 0; /* mux_lock not locked, failure */
+ if (!(flags & I2C_LOCK_ROOT_ADAPTER))
+ return 1; /* we only want mux_lock, success */
+ if (parent->trylock_bus(parent, flags))
+ return 1; /* parent locked too, success */
+ rt_mutex_unlock(&parent->mux_lock);
+ return 0; /* parent not locked, failure */
+}
+
+static void i2c_mux_unlock_bus(struct i2c_adapter *adapter, unsigned int flags)
+{
+ struct i2c_mux_priv *priv = adapter->algo_data;
+ struct i2c_adapter *parent = priv->muxc->parent;
+
+ if (flags & I2C_LOCK_ROOT_ADAPTER)
+ i2c_unlock_bus(parent, flags);
+ rt_mutex_unlock(&parent->mux_lock);
+}
+
+static void i2c_parent_lock_bus(struct i2c_adapter *adapter,
+ unsigned int flags)
+{
+ struct i2c_mux_priv *priv = adapter->algo_data;
+ struct i2c_adapter *parent = priv->muxc->parent;
+
+ rt_mutex_lock(&parent->mux_lock);
+ i2c_lock_bus(parent, flags);
+}
+
+static int i2c_parent_trylock_bus(struct i2c_adapter *adapter,
+ unsigned int flags)
+{
+ struct i2c_mux_priv *priv = adapter->algo_data;
+ struct i2c_adapter *parent = priv->muxc->parent;
+
+ if (!rt_mutex_trylock(&parent->mux_lock))
+ return 0; /* mux_lock not locked, failure */
+ if (parent->trylock_bus(parent, flags))
+ return 1; /* parent locked too, success */
+ rt_mutex_unlock(&parent->mux_lock);
+ return 0; /* parent not locked, failure */
+}
+
+static void i2c_parent_unlock_bus(struct i2c_adapter *adapter,
+ unsigned int flags)
+{
+ struct i2c_mux_priv *priv = adapter->algo_data;
+ struct i2c_adapter *parent = priv->muxc->parent;
+
+ i2c_unlock_bus(parent, flags);
+ rt_mutex_unlock(&parent->mux_lock);
+}
+
+struct i2c_adapter *i2c_root_adapter(struct device *dev)
+{
+ struct device *i2c;
+ struct i2c_adapter *i2c_root;
+
+ /*
+ * Walk up the device tree to find an i2c adapter, indicating
+ * that this is an i2c client device. Check all ancestors to
+ * handle mfd devices etc.
+ */
+ for (i2c = dev; i2c; i2c = i2c->parent) {
+ if (i2c->type == &i2c_adapter_type)
+ break;
+ }
+ if (!i2c)
+ return NULL;
+
+ /* Continue up the tree to find the root i2c adapter */
+ i2c_root = to_i2c_adapter(i2c);
+ while (i2c_parent_is_i2c_adapter(i2c_root))
+ i2c_root = i2c_parent_is_i2c_adapter(i2c_root);
+
+ return i2c_root;
+}
+EXPORT_SYMBOL_GPL(i2c_root_adapter);
+
+struct i2c_mux_core *i2c_mux_alloc(struct i2c_adapter *parent,
+ struct device *dev, int max_adapters,
+ int sizeof_priv, u32 flags,
+ int (*select)(struct i2c_mux_core *, u32),
+ int (*deselect)(struct i2c_mux_core *, u32))
+{
+ struct i2c_mux_core *muxc;
+
+ muxc = devm_kzalloc(dev, sizeof(*muxc)
+ + max_adapters * sizeof(muxc->adapter[0])
+ + sizeof_priv, GFP_KERNEL);
+ if (!muxc)
+ return NULL;
+ if (sizeof_priv)
+ muxc->priv = &muxc->adapter[max_adapters];
+
+ muxc->parent = parent;
+ muxc->dev = dev;
+ if (flags & I2C_MUX_LOCKED)
+ muxc->mux_locked = true;
+ muxc->select = select;
+ muxc->deselect = deselect;
+ muxc->max_adapters = max_adapters;
+
+ return muxc;
+}
+EXPORT_SYMBOL_GPL(i2c_mux_alloc);
+
+int i2c_mux_add_adapter(struct i2c_mux_core *muxc,
+ u32 force_nr, u32 chan_id,
+ unsigned int class)
{
+ struct i2c_adapter *parent = muxc->parent;
struct i2c_mux_priv *priv;
char symlink_name[20];
int ret;
- priv = kzalloc(sizeof(struct i2c_mux_priv), GFP_KERNEL);
+ if (muxc->num_adapters >= muxc->max_adapters) {
+ dev_err(muxc->dev, "No room for more i2c-mux adapters\n");
+ return -EINVAL;
+ }
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv)
- return NULL;
+ return -ENOMEM;
/* Set up private adapter data */
- priv->parent = parent;
- priv->mux_dev = mux_dev;
- priv->mux_priv = mux_priv;
+ priv->muxc = muxc;
priv->chan_id = chan_id;
- priv->select = select;
- priv->deselect = deselect;
/* Need to do algo dynamically because we don't know ahead
* of time what sort of physical adapter we'll be dealing with.
*/
- if (parent->algo->master_xfer)
- priv->algo.master_xfer = i2c_mux_master_xfer;
- if (parent->algo->smbus_xfer)
- priv->algo.smbus_xfer = i2c_mux_smbus_xfer;
+ if (parent->algo->master_xfer) {
+ if (muxc->mux_locked)
+ priv->algo.master_xfer = i2c_mux_master_xfer;
+ else
+ priv->algo.master_xfer = __i2c_mux_master_xfer;
+ }
+ if (parent->algo->smbus_xfer) {
+ if (muxc->mux_locked)
+ priv->algo.smbus_xfer = i2c_mux_smbus_xfer;
+ else
+ priv->algo.smbus_xfer = __i2c_mux_smbus_xfer;
+ }
priv->algo.functionality = i2c_mux_functionality;
/* Now fill out new adapter structure */
@@ -146,6 +312,15 @@ struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent,
priv->adap.retries = parent->retries;
priv->adap.timeout = parent->timeout;
priv->adap.quirks = parent->quirks;
+ if (muxc->mux_locked) {
+ priv->adap.lock_bus = i2c_mux_lock_bus;
+ priv->adap.trylock_bus = i2c_mux_trylock_bus;
+ priv->adap.unlock_bus = i2c_mux_unlock_bus;
+ } else {
+ priv->adap.lock_bus = i2c_parent_lock_bus;
+ priv->adap.trylock_bus = i2c_parent_trylock_bus;
+ priv->adap.unlock_bus = i2c_parent_unlock_bus;
+ }
/* Sanity check on class */
if (i2c_mux_parent_classes(parent) & class)
@@ -159,11 +334,11 @@ struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent,
* Try to populate the mux adapter's of_node, expands to
* nothing if !CONFIG_OF.
*/
- if (mux_dev->of_node) {
+ if (muxc->dev->of_node) {
struct device_node *child;
u32 reg;
- for_each_child_of_node(mux_dev->of_node, child) {
+ for_each_child_of_node(muxc->dev->of_node, child) {
ret = of_property_read_u32(child, "reg", &reg);
if (ret)
continue;
@@ -177,8 +352,9 @@ struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent,
/*
* Associate the mux channel with an ACPI node.
*/
- if (has_acpi_companion(mux_dev))
- acpi_preset_companion(&priv->adap.dev, ACPI_COMPANION(mux_dev),
+ if (has_acpi_companion(muxc->dev))
+ acpi_preset_companion(&priv->adap.dev,
+ ACPI_COMPANION(muxc->dev),
chan_id);
if (force_nr) {
@@ -192,35 +368,45 @@ struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent,
"failed to add mux-adapter (error=%d)\n",
ret);
kfree(priv);
- return NULL;
+ return ret;
}
- WARN(sysfs_create_link(&priv->adap.dev.kobj, &mux_dev->kobj, "mux_device"),
- "can't create symlink to mux device\n");
+ WARN(sysfs_create_link(&priv->adap.dev.kobj, &muxc->dev->kobj,
+ "mux_device"),
+ "can't create symlink to mux device\n");
snprintf(symlink_name, sizeof(symlink_name), "channel-%u", chan_id);
- WARN(sysfs_create_link(&mux_dev->kobj, &priv->adap.dev.kobj, symlink_name),
- "can't create symlink for channel %u\n", chan_id);
+ WARN(sysfs_create_link(&muxc->dev->kobj, &priv->adap.dev.kobj,
+ symlink_name),
+ "can't create symlink for channel %u\n", chan_id);
dev_info(&parent->dev, "Added multiplexed i2c bus %d\n",
i2c_adapter_id(&priv->adap));
- return &priv->adap;
+ muxc->adapter[muxc->num_adapters++] = &priv->adap;
+ return 0;
}
-EXPORT_SYMBOL_GPL(i2c_add_mux_adapter);
+EXPORT_SYMBOL_GPL(i2c_mux_add_adapter);
-void i2c_del_mux_adapter(struct i2c_adapter *adap)
+void i2c_mux_del_adapters(struct i2c_mux_core *muxc)
{
- struct i2c_mux_priv *priv = adap->algo_data;
char symlink_name[20];
- snprintf(symlink_name, sizeof(symlink_name), "channel-%u", priv->chan_id);
- sysfs_remove_link(&priv->mux_dev->kobj, symlink_name);
+ while (muxc->num_adapters) {
+ struct i2c_adapter *adap = muxc->adapter[--muxc->num_adapters];
+ struct i2c_mux_priv *priv = adap->algo_data;
+
+ muxc->adapter[muxc->num_adapters] = NULL;
+
+ snprintf(symlink_name, sizeof(symlink_name),
+ "channel-%u", priv->chan_id);
+ sysfs_remove_link(&muxc->dev->kobj, symlink_name);
- sysfs_remove_link(&priv->adap.dev.kobj, "mux_device");
- i2c_del_adapter(adap);
- kfree(priv);
+ sysfs_remove_link(&priv->adap.dev.kobj, "mux_device");
+ i2c_del_adapter(adap);
+ kfree(priv);
+ }
}
-EXPORT_SYMBOL_GPL(i2c_del_mux_adapter);
+EXPORT_SYMBOL_GPL(i2c_mux_del_adapters);
MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
MODULE_DESCRIPTION("I2C driver for multiplexed I2C busses");
diff --git a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c
index 402e3a6c671a..a90bbc4037dd 100644
--- a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c
+++ b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c
@@ -28,8 +28,6 @@
/**
* struct i2c_arbitrator_data - Driver data for I2C arbitrator
*
- * @parent: Parent adapter
- * @child: Child bus
* @our_gpio: GPIO we'll use to claim.
* @our_gpio_release: 0 if active high; 1 if active low; AKA if the GPIO ==
* this then consider it released.
@@ -42,8 +40,6 @@
*/
struct i2c_arbitrator_data {
- struct i2c_adapter *parent;
- struct i2c_adapter *child;
int our_gpio;
int our_gpio_release;
int their_gpio;
@@ -59,9 +55,9 @@ struct i2c_arbitrator_data {
*
* Use the GPIO-based signalling protocol; return -EBUSY if we fail.
*/
-static int i2c_arbitrator_select(struct i2c_adapter *adap, void *data, u32 chan)
+static int i2c_arbitrator_select(struct i2c_mux_core *muxc, u32 chan)
{
- const struct i2c_arbitrator_data *arb = data;
+ const struct i2c_arbitrator_data *arb = i2c_mux_priv(muxc);
unsigned long stop_retry, stop_time;
/* Start a round of trying to claim the bus */
@@ -93,7 +89,7 @@ static int i2c_arbitrator_select(struct i2c_adapter *adap, void *data, u32 chan)
/* Give up, release our claim */
gpio_set_value(arb->our_gpio, arb->our_gpio_release);
udelay(arb->slew_delay_us);
- dev_err(&adap->dev, "Could not claim bus, timeout\n");
+ dev_err(muxc->dev, "Could not claim bus, timeout\n");
return -EBUSY;
}
@@ -102,10 +98,9 @@ static int i2c_arbitrator_select(struct i2c_adapter *adap, void *data, u32 chan)
*
* Release the I2C bus using the GPIO-based signalling protocol.
*/
-static int i2c_arbitrator_deselect(struct i2c_adapter *adap, void *data,
- u32 chan)
+static int i2c_arbitrator_deselect(struct i2c_mux_core *muxc, u32 chan)
{
- const struct i2c_arbitrator_data *arb = data;
+ const struct i2c_arbitrator_data *arb = i2c_mux_priv(muxc);
/* Release the bus and wait for the other master to notice */
gpio_set_value(arb->our_gpio, arb->our_gpio_release);
@@ -119,6 +114,7 @@ static int i2c_arbitrator_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct device_node *parent_np;
+ struct i2c_mux_core *muxc;
struct i2c_arbitrator_data *arb;
enum of_gpio_flags gpio_flags;
unsigned long out_init;
@@ -134,12 +130,13 @@ static int i2c_arbitrator_probe(struct platform_device *pdev)
return -EINVAL;
}
- arb = devm_kzalloc(dev, sizeof(*arb), GFP_KERNEL);
- if (!arb) {
- dev_err(dev, "Cannot allocate i2c_arbitrator_data\n");
+ muxc = i2c_mux_alloc(NULL, dev, 1, sizeof(*arb), 0,
+ i2c_arbitrator_select, i2c_arbitrator_deselect);
+ if (!muxc)
return -ENOMEM;
- }
- platform_set_drvdata(pdev, arb);
+ arb = i2c_mux_priv(muxc);
+
+ platform_set_drvdata(pdev, muxc);
/* Request GPIOs */
ret = of_get_named_gpio_flags(np, "our-claim-gpio", 0, &gpio_flags);
@@ -196,21 +193,18 @@ static int i2c_arbitrator_probe(struct platform_device *pdev)
dev_err(dev, "Cannot parse i2c-parent\n");
return -EINVAL;
}
- arb->parent = of_get_i2c_adapter_by_node(parent_np);
+ muxc->parent = of_get_i2c_adapter_by_node(parent_np);
of_node_put(parent_np);
- if (!arb->parent) {
+ if (!muxc->parent) {
dev_err(dev, "Cannot find parent bus\n");
return -EPROBE_DEFER;
}
/* Actually add the mux adapter */
- arb->child = i2c_add_mux_adapter(arb->parent, dev, arb, 0, 0, 0,
- i2c_arbitrator_select,
- i2c_arbitrator_deselect);
- if (!arb->child) {
+ ret = i2c_mux_add_adapter(muxc, 0, 0, 0);
+ if (ret) {
dev_err(dev, "Failed to add adapter\n");
- ret = -ENODEV;
- i2c_put_adapter(arb->parent);
+ i2c_put_adapter(muxc->parent);
}
return ret;
@@ -218,11 +212,10 @@ static int i2c_arbitrator_probe(struct platform_device *pdev)
static int i2c_arbitrator_remove(struct platform_device *pdev)
{
- struct i2c_arbitrator_data *arb = platform_get_drvdata(pdev);
-
- i2c_del_mux_adapter(arb->child);
- i2c_put_adapter(arb->parent);
+ struct i2c_mux_core *muxc = platform_get_drvdata(pdev);
+ i2c_mux_del_adapters(muxc);
+ i2c_put_adapter(muxc->parent);
return 0;
}
diff --git a/drivers/i2c/muxes/i2c-mux-gpio.c b/drivers/i2c/muxes/i2c-mux-gpio.c
index b8e11c16d98c..e5cf26eefa97 100644
--- a/drivers/i2c/muxes/i2c-mux-gpio.c
+++ b/drivers/i2c/muxes/i2c-mux-gpio.c
@@ -15,11 +15,10 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/gpio.h>
+#include "../../gpio/gpiolib.h"
#include <linux/of_gpio.h>
struct gpiomux {
- struct i2c_adapter *parent;
- struct i2c_adapter **adap; /* child busses */
struct i2c_mux_gpio_platform_data data;
unsigned gpio_base;
};
@@ -33,18 +32,18 @@ static void i2c_mux_gpio_set(const struct gpiomux *mux, unsigned val)
val & (1 << i));
}
-static int i2c_mux_gpio_select(struct i2c_adapter *adap, void *data, u32 chan)
+static int i2c_mux_gpio_select(struct i2c_mux_core *muxc, u32 chan)
{
- struct gpiomux *mux = data;
+ struct gpiomux *mux = i2c_mux_priv(muxc);
i2c_mux_gpio_set(mux, chan);
return 0;
}
-static int i2c_mux_gpio_deselect(struct i2c_adapter *adap, void *data, u32 chan)
+static int i2c_mux_gpio_deselect(struct i2c_mux_core *muxc, u32 chan)
{
- struct gpiomux *mux = data;
+ struct gpiomux *mux = i2c_mux_priv(muxc);
i2c_mux_gpio_set(mux, mux->data.idle);
@@ -136,19 +135,16 @@ static int i2c_mux_gpio_probe_dt(struct gpiomux *mux,
static int i2c_mux_gpio_probe(struct platform_device *pdev)
{
+ struct i2c_mux_core *muxc;
struct gpiomux *mux;
struct i2c_adapter *parent;
- int (*deselect) (struct i2c_adapter *, void *, u32);
+ struct i2c_adapter *root;
unsigned initial_state, gpio_base;
int i, ret;
mux = devm_kzalloc(&pdev->dev, sizeof(*mux), GFP_KERNEL);
- if (!mux) {
- dev_err(&pdev->dev, "Cannot allocate gpiomux structure");
+ if (!mux)
return -ENOMEM;
- }
-
- platform_set_drvdata(pdev, mux);
if (!dev_get_platdata(&pdev->dev)) {
ret = i2c_mux_gpio_probe_dt(mux, pdev);
@@ -180,27 +176,32 @@ static int i2c_mux_gpio_probe(struct platform_device *pdev)
if (!parent)
return -EPROBE_DEFER;
- mux->parent = parent;
- mux->gpio_base = gpio_base;
-
- mux->adap = devm_kzalloc(&pdev->dev,
- sizeof(*mux->adap) * mux->data.n_values,
- GFP_KERNEL);
- if (!mux->adap) {
- dev_err(&pdev->dev, "Cannot allocate i2c_adapter structure");
+ muxc = i2c_mux_alloc(parent, &pdev->dev, mux->data.n_values, 0, 0,
+ i2c_mux_gpio_select, NULL);
+ if (!muxc) {
ret = -ENOMEM;
goto alloc_failed;
}
+ muxc->priv = mux;
+
+ platform_set_drvdata(pdev, muxc);
+
+ root = i2c_root_adapter(&parent->dev);
+
+ muxc->mux_locked = true;
+ mux->gpio_base = gpio_base;
if (mux->data.idle != I2C_MUX_GPIO_NO_IDLE) {
initial_state = mux->data.idle;
- deselect = i2c_mux_gpio_deselect;
+ muxc->deselect = i2c_mux_gpio_deselect;
} else {
initial_state = mux->data.values[0];
- deselect = NULL;
}
for (i = 0; i < mux->data.n_gpios; i++) {
+ struct device *gpio_dev;
+ struct gpio_desc *gpio_desc;
+
ret = gpio_request(gpio_base + mux->data.gpios[i], "i2c-mux-gpio");
if (ret) {
dev_err(&pdev->dev, "Failed to request GPIO %d\n",
@@ -217,17 +218,24 @@ static int i2c_mux_gpio_probe(struct platform_device *pdev)
i++; /* gpio_request above succeeded, so must free */
goto err_request_gpio;
}
+
+ if (!muxc->mux_locked)
+ continue;
+
+ gpio_desc = gpio_to_desc(gpio_base + mux->data.gpios[i]);
+ gpio_dev = &gpio_desc->gdev->dev;
+ muxc->mux_locked = i2c_root_adapter(gpio_dev) == root;
}
+ if (muxc->mux_locked)
+ dev_info(&pdev->dev, "mux-locked i2c mux\n");
+
for (i = 0; i < mux->data.n_values; i++) {
u32 nr = mux->data.base_nr ? (mux->data.base_nr + i) : 0;
unsigned int class = mux->data.classes ? mux->data.classes[i] : 0;
- mux->adap[i] = i2c_add_mux_adapter(parent, &pdev->dev, mux, nr,
- mux->data.values[i], class,
- i2c_mux_gpio_select, deselect);
- if (!mux->adap[i]) {
- ret = -ENODEV;
+ ret = i2c_mux_add_adapter(muxc, nr, mux->data.values[i], class);
+ if (ret) {
dev_err(&pdev->dev, "Failed to add adapter %d\n", i);
goto add_adapter_failed;
}
@@ -239,8 +247,7 @@ static int i2c_mux_gpio_probe(struct platform_device *pdev)
return 0;
add_adapter_failed:
- for (; i > 0; i--)
- i2c_del_mux_adapter(mux->adap[i - 1]);
+ i2c_mux_del_adapters(muxc);
i = mux->data.n_gpios;
err_request_gpio:
for (; i > 0; i--)
@@ -253,16 +260,16 @@ alloc_failed:
static int i2c_mux_gpio_remove(struct platform_device *pdev)
{
- struct gpiomux *mux = platform_get_drvdata(pdev);
+ struct i2c_mux_core *muxc = platform_get_drvdata(pdev);
+ struct gpiomux *mux = i2c_mux_priv(muxc);
int i;
- for (i = 0; i < mux->data.n_values; i++)
- i2c_del_mux_adapter(mux->adap[i]);
+ i2c_mux_del_adapters(muxc);
for (i = 0; i < mux->data.n_gpios; i++)
gpio_free(mux->gpio_base + mux->data.gpios[i]);
- i2c_put_adapter(mux->parent);
+ i2c_put_adapter(muxc->parent);
return 0;
}
diff --git a/drivers/i2c/muxes/i2c-mux-pca9541.c b/drivers/i2c/muxes/i2c-mux-pca9541.c
index d0ba424adebc..3cb8af635db5 100644
--- a/drivers/i2c/muxes/i2c-mux-pca9541.c
+++ b/drivers/i2c/muxes/i2c-mux-pca9541.c
@@ -73,7 +73,7 @@
#define SELECT_DELAY_LONG 1000
struct pca9541 {
- struct i2c_adapter *mux_adap;
+ struct i2c_client *client;
unsigned long select_timeout;
unsigned long arb_timeout;
};
@@ -217,7 +217,8 @@ static const u8 pca9541_control[16] = {
*/
static int pca9541_arbitrate(struct i2c_client *client)
{
- struct pca9541 *data = i2c_get_clientdata(client);
+ struct i2c_mux_core *muxc = i2c_get_clientdata(client);
+ struct pca9541 *data = i2c_mux_priv(muxc);
int reg;
reg = pca9541_reg_read(client, PCA9541_CONTROL);
@@ -285,9 +286,10 @@ static int pca9541_arbitrate(struct i2c_client *client)
return 0;
}
-static int pca9541_select_chan(struct i2c_adapter *adap, void *client, u32 chan)
+static int pca9541_select_chan(struct i2c_mux_core *muxc, u32 chan)
{
- struct pca9541 *data = i2c_get_clientdata(client);
+ struct pca9541 *data = i2c_mux_priv(muxc);
+ struct i2c_client *client = data->client;
int ret;
unsigned long timeout = jiffies + ARB2_TIMEOUT;
/* give up after this time */
@@ -309,9 +311,11 @@ static int pca9541_select_chan(struct i2c_adapter *adap, void *client, u32 chan)
return -ETIMEDOUT;
}
-static int pca9541_release_chan(struct i2c_adapter *adap,
- void *client, u32 chan)
+static int pca9541_release_chan(struct i2c_mux_core *muxc, u32 chan)
{
+ struct pca9541 *data = i2c_mux_priv(muxc);
+ struct i2c_client *client = data->client;
+
pca9541_release_bus(client);
return 0;
}
@@ -324,20 +328,13 @@ static int pca9541_probe(struct i2c_client *client,
{
struct i2c_adapter *adap = client->adapter;
struct pca954x_platform_data *pdata = dev_get_platdata(&client->dev);
+ struct i2c_mux_core *muxc;
struct pca9541 *data;
int force;
- int ret = -ENODEV;
+ int ret;
if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_BYTE_DATA))
- goto err;
-
- data = kzalloc(sizeof(struct pca9541), GFP_KERNEL);
- if (!data) {
- ret = -ENOMEM;
- goto err;
- }
-
- i2c_set_clientdata(client, data);
+ return -ENODEV;
/*
* I2C accesses are unprotected here.
@@ -352,34 +349,33 @@ static int pca9541_probe(struct i2c_client *client,
force = 0;
if (pdata)
force = pdata->modes[0].adap_id;
- data->mux_adap = i2c_add_mux_adapter(adap, &client->dev, client,
- force, 0, 0,
- pca9541_select_chan,
- pca9541_release_chan);
+ muxc = i2c_mux_alloc(adap, &client->dev, 1, sizeof(*data), 0,
+ pca9541_select_chan, pca9541_release_chan);
+ if (!muxc)
+ return -ENOMEM;
- if (data->mux_adap == NULL) {
+ data = i2c_mux_priv(muxc);
+ data->client = client;
+
+ i2c_set_clientdata(client, muxc);
+
+ ret = i2c_mux_add_adapter(muxc, force, 0, 0);
+ if (ret) {
dev_err(&client->dev, "failed to register master selector\n");
- goto exit_free;
+ return ret;
}
dev_info(&client->dev, "registered master selector for I2C %s\n",
client->name);
return 0;
-
-exit_free:
- kfree(data);
-err:
- return ret;
}
static int pca9541_remove(struct i2c_client *client)
{
- struct pca9541 *data = i2c_get_clientdata(client);
-
- i2c_del_mux_adapter(data->mux_adap);
+ struct i2c_mux_core *muxc = i2c_get_clientdata(client);
- kfree(data);
+ i2c_mux_del_adapters(muxc);
return 0;
}
diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index acfcef3d4068..528e755c468f 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -60,9 +60,10 @@ enum pca_type {
struct pca954x {
enum pca_type type;
- struct i2c_adapter *virt_adaps[PCA954X_MAX_NCHANS];
u8 last_chan; /* last register value */
+ u8 deselect;
+ struct i2c_client *client;
};
struct chip_desc {
@@ -146,10 +147,10 @@ static int pca954x_reg_write(struct i2c_adapter *adap,
return ret;
}
-static int pca954x_select_chan(struct i2c_adapter *adap,
- void *client, u32 chan)
+static int pca954x_select_chan(struct i2c_mux_core *muxc, u32 chan)
{
- struct pca954x *data = i2c_get_clientdata(client);
+ struct pca954x *data = i2c_mux_priv(muxc);
+ struct i2c_client *client = data->client;
const struct chip_desc *chip = &chips[data->type];
u8 regval;
int ret = 0;
@@ -162,21 +163,24 @@ static int pca954x_select_chan(struct i2c_adapter *adap,
/* Only select the channel if its different from the last channel */
if (data->last_chan != regval) {
- ret = pca954x_reg_write(adap, client, regval);
+ ret = pca954x_reg_write(muxc->parent, client, regval);
data->last_chan = regval;
}
return ret;
}
-static int pca954x_deselect_mux(struct i2c_adapter *adap,
- void *client, u32 chan)
+static int pca954x_deselect_mux(struct i2c_mux_core *muxc, u32 chan)
{
- struct pca954x *data = i2c_get_clientdata(client);
+ struct pca954x *data = i2c_mux_priv(muxc);
+ struct i2c_client *client = data->client;
+
+ if (!(data->deselect & (1 << chan)))
+ return 0;
/* Deselect active channel */
data->last_chan = 0;
- return pca954x_reg_write(adap, client, data->last_chan);
+ return pca954x_reg_write(muxc->parent, client, data->last_chan);
}
/*
@@ -191,17 +195,22 @@ static int pca954x_probe(struct i2c_client *client,
bool idle_disconnect_dt;
struct gpio_desc *gpio;
int num, force, class;
+ struct i2c_mux_core *muxc;
struct pca954x *data;
int ret;
if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_BYTE))
return -ENODEV;
- data = devm_kzalloc(&client->dev, sizeof(struct pca954x), GFP_KERNEL);
- if (!data)
+ muxc = i2c_mux_alloc(adap, &client->dev,
+ PCA954X_MAX_NCHANS, sizeof(*data), 0,
+ pca954x_select_chan, pca954x_deselect_mux);
+ if (!muxc)
return -ENOMEM;
+ data = i2c_mux_priv(muxc);
- i2c_set_clientdata(client, data);
+ i2c_set_clientdata(client, muxc);
+ data->client = client;
/* Get the mux out of reset if a reset GPIO is specified. */
gpio = devm_gpiod_get_optional(&client->dev, "reset", GPIOD_OUT_LOW);
@@ -238,16 +247,13 @@ static int pca954x_probe(struct i2c_client *client,
/* discard unconfigured channels */
break;
idle_disconnect_pd = pdata->modes[num].deselect_on_exit;
+ data->deselect |= (idle_disconnect_pd
+ || idle_disconnect_dt) << num;
}
- data->virt_adaps[num] =
- i2c_add_mux_adapter(adap, &client->dev, client,
- force, num, class, pca954x_select_chan,
- (idle_disconnect_pd || idle_disconnect_dt)
- ? pca954x_deselect_mux : NULL);
+ ret = i2c_mux_add_adapter(muxc, force, num, class);
- if (data->virt_adaps[num] == NULL) {
- ret = -ENODEV;
+ if (ret) {
dev_err(&client->dev,
"failed to register multiplexed adapter"
" %d as bus %d\n", num, force);
@@ -263,23 +269,15 @@ static int pca954x_probe(struct i2c_client *client,
return 0;
virt_reg_failed:
- for (num--; num >= 0; num--)
- i2c_del_mux_adapter(data->virt_adaps[num]);
+ i2c_mux_del_adapters(muxc);
return ret;
}
static int pca954x_remove(struct i2c_client *client)
{
- struct pca954x *data = i2c_get_clientdata(client);
- const struct chip_desc *chip = &chips[data->type];
- int i;
-
- for (i = 0; i < chip->nchans; ++i)
- if (data->virt_adaps[i]) {
- i2c_del_mux_adapter(data->virt_adaps[i]);
- data->virt_adaps[i] = NULL;
- }
+ struct i2c_mux_core *muxc = i2c_get_clientdata(client);
+ i2c_mux_del_adapters(muxc);
return 0;
}
@@ -287,7 +285,8 @@ static int pca954x_remove(struct i2c_client *client)
static int pca954x_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
- struct pca954x *data = i2c_get_clientdata(client);
+ struct i2c_mux_core *muxc = i2c_get_clientdata(client);
+ struct pca954x *data = i2c_mux_priv(muxc);
data->last_chan = 0;
return i2c_smbus_write_byte(client, 0);
diff --git a/drivers/i2c/muxes/i2c-mux-pinctrl.c b/drivers/i2c/muxes/i2c-mux-pinctrl.c
index b5a982ba8898..35bb775e1b74 100644
--- a/drivers/i2c/muxes/i2c-mux-pinctrl.c
+++ b/drivers/i2c/muxes/i2c-mux-pinctrl.c
@@ -24,36 +24,32 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/of.h>
+#include "../../pinctrl/core.h"
struct i2c_mux_pinctrl {
- struct device *dev;
struct i2c_mux_pinctrl_platform_data *pdata;
struct pinctrl *pinctrl;
struct pinctrl_state **states;
struct pinctrl_state *state_idle;
- struct i2c_adapter *parent;
- struct i2c_adapter **busses;
};
-static int i2c_mux_pinctrl_select(struct i2c_adapter *adap, void *data,
- u32 chan)
+static int i2c_mux_pinctrl_select(struct i2c_mux_core *muxc, u32 chan)
{
- struct i2c_mux_pinctrl *mux = data;
+ struct i2c_mux_pinctrl *mux = i2c_mux_priv(muxc);
return pinctrl_select_state(mux->pinctrl, mux->states[chan]);
}
-static int i2c_mux_pinctrl_deselect(struct i2c_adapter *adap, void *data,
- u32 chan)
+static int i2c_mux_pinctrl_deselect(struct i2c_mux_core *muxc, u32 chan)
{
- struct i2c_mux_pinctrl *mux = data;
+ struct i2c_mux_pinctrl *mux = i2c_mux_priv(muxc);
return pinctrl_select_state(mux->pinctrl, mux->state_idle);
}
#ifdef CONFIG_OF
static int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux,
- struct platform_device *pdev)
+ struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
int num_names, i, ret;
@@ -64,15 +60,12 @@ static int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux,
return 0;
mux->pdata = devm_kzalloc(&pdev->dev, sizeof(*mux->pdata), GFP_KERNEL);
- if (!mux->pdata) {
- dev_err(mux->dev,
- "Cannot allocate i2c_mux_pinctrl_platform_data\n");
+ if (!mux->pdata)
return -ENOMEM;
- }
num_names = of_property_count_strings(np, "pinctrl-names");
if (num_names < 0) {
- dev_err(mux->dev, "Cannot parse pinctrl-names: %d\n",
+ dev_err(&pdev->dev, "Cannot parse pinctrl-names: %d\n",
num_names);
return num_names;
}
@@ -80,23 +73,22 @@ static int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux,
mux->pdata->pinctrl_states = devm_kzalloc(&pdev->dev,
sizeof(*mux->pdata->pinctrl_states) * num_names,
GFP_KERNEL);
- if (!mux->pdata->pinctrl_states) {
- dev_err(mux->dev, "Cannot allocate pinctrl_states\n");
+ if (!mux->pdata->pinctrl_states)
return -ENOMEM;
- }
for (i = 0; i < num_names; i++) {
ret = of_property_read_string_index(np, "pinctrl-names", i,
&mux->pdata->pinctrl_states[mux->pdata->bus_count]);
if (ret < 0) {
- dev_err(mux->dev, "Cannot parse pinctrl-names: %d\n",
+ dev_err(&pdev->dev, "Cannot parse pinctrl-names: %d\n",
ret);
return ret;
}
if (!strcmp(mux->pdata->pinctrl_states[mux->pdata->bus_count],
"idle")) {
if (i != num_names - 1) {
- dev_err(mux->dev, "idle state must be last\n");
+ dev_err(&pdev->dev,
+ "idle state must be last\n");
return -EINVAL;
}
mux->pdata->pinctrl_state_idle = "idle";
@@ -107,13 +99,13 @@ static int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux,
adapter_np = of_parse_phandle(np, "i2c-parent", 0);
if (!adapter_np) {
- dev_err(mux->dev, "Cannot parse i2c-parent\n");
+ dev_err(&pdev->dev, "Cannot parse i2c-parent\n");
return -ENODEV;
}
adapter = of_find_i2c_adapter_by_node(adapter_np);
of_node_put(adapter_np);
if (!adapter) {
- dev_err(mux->dev, "Cannot find parent bus\n");
+ dev_err(&pdev->dev, "Cannot find parent bus\n");
return -EPROBE_DEFER;
}
mux->pdata->parent_bus_num = i2c_adapter_id(adapter);
@@ -129,21 +121,38 @@ static inline int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux,
}
#endif
+static struct i2c_adapter *i2c_mux_pinctrl_root_adapter(
+ struct pinctrl_state *state)
+{
+ struct i2c_adapter *root = NULL;
+ struct pinctrl_setting *setting;
+ struct i2c_adapter *pin_root;
+
+ list_for_each_entry(setting, &state->settings, node) {
+ pin_root = i2c_root_adapter(setting->pctldev->dev);
+ if (!pin_root)
+ return NULL;
+ if (!root)
+ root = pin_root;
+ else if (root != pin_root)
+ return NULL;
+ }
+
+ return root;
+}
+
static int i2c_mux_pinctrl_probe(struct platform_device *pdev)
{
+ struct i2c_mux_core *muxc;
struct i2c_mux_pinctrl *mux;
- int (*deselect)(struct i2c_adapter *, void *, u32);
+ struct i2c_adapter *root;
int i, ret;
mux = devm_kzalloc(&pdev->dev, sizeof(*mux), GFP_KERNEL);
if (!mux) {
- dev_err(&pdev->dev, "Cannot allocate i2c_mux_pinctrl\n");
ret = -ENOMEM;
goto err;
}
- platform_set_drvdata(pdev, mux);
-
- mux->dev = &pdev->dev;
mux->pdata = dev_get_platdata(&pdev->dev);
if (!mux->pdata) {
@@ -166,14 +175,15 @@ static int i2c_mux_pinctrl_probe(struct platform_device *pdev)
goto err;
}
- mux->busses = devm_kzalloc(&pdev->dev,
- sizeof(*mux->busses) * mux->pdata->bus_count,
- GFP_KERNEL);
- if (!mux->busses) {
- dev_err(&pdev->dev, "Cannot allocate busses\n");
+ muxc = i2c_mux_alloc(NULL, &pdev->dev, mux->pdata->bus_count, 0, 0,
+ i2c_mux_pinctrl_select, NULL);
+ if (!muxc) {
ret = -ENOMEM;
goto err;
}
+ muxc->priv = mux;
+
+ platform_set_drvdata(pdev, muxc);
mux->pinctrl = devm_pinctrl_get(&pdev->dev);
if (IS_ERR(mux->pinctrl)) {
@@ -184,13 +194,13 @@ static int i2c_mux_pinctrl_probe(struct platform_device *pdev)
for (i = 0; i < mux->pdata->bus_count; i++) {
mux->states[i] = pinctrl_lookup_state(mux->pinctrl,
mux->pdata->pinctrl_states[i]);
- if (IS_ERR(mux->states[i])) {
- ret = PTR_ERR(mux->states[i]);
- dev_err(&pdev->dev,
- "Cannot look up pinctrl state %s: %d\n",
- mux->pdata->pinctrl_states[i], ret);
- goto err;
- }
+ if (IS_ERR(mux->states[i])) {
+ ret = PTR_ERR(mux->states[i]);
+ dev_err(&pdev->dev,
+ "Cannot look up pinctrl state %s: %d\n",
+ mux->pdata->pinctrl_states[i], ret);
+ goto err;
+ }
}
if (mux->pdata->pinctrl_state_idle) {
mux->state_idle = pinctrl_lookup_state(mux->pinctrl,
@@ -203,29 +213,39 @@ static int i2c_mux_pinctrl_probe(struct platform_device *pdev)
goto err;
}
- deselect = i2c_mux_pinctrl_deselect;
- } else {
- deselect = NULL;
+ muxc->deselect = i2c_mux_pinctrl_deselect;
}
- mux->parent = i2c_get_adapter(mux->pdata->parent_bus_num);
- if (!mux->parent) {
+ muxc->parent = i2c_get_adapter(mux->pdata->parent_bus_num);
+ if (!muxc->parent) {
dev_err(&pdev->dev, "Parent adapter (%d) not found\n",
mux->pdata->parent_bus_num);
ret = -EPROBE_DEFER;
goto err;
}
+ root = i2c_root_adapter(&muxc->parent->dev);
+
+ muxc->mux_locked = true;
+ for (i = 0; i < mux->pdata->bus_count; i++) {
+ if (root != i2c_mux_pinctrl_root_adapter(mux->states[i])) {
+ muxc->mux_locked = false;
+ break;
+ }
+ }
+ if (muxc->mux_locked && mux->pdata->pinctrl_state_idle &&
+ root != i2c_mux_pinctrl_root_adapter(mux->state_idle))
+ muxc->mux_locked = false;
+
+ if (muxc->mux_locked)
+ dev_info(&pdev->dev, "mux-locked i2c mux\n");
+
for (i = 0; i < mux->pdata->bus_count; i++) {
u32 bus = mux->pdata->base_bus_num ?
(mux->pdata->base_bus_num + i) : 0;
- mux->busses[i] = i2c_add_mux_adapter(mux->parent, &pdev->dev,
- mux, bus, i, 0,
- i2c_mux_pinctrl_select,
- deselect);
- if (!mux->busses[i]) {
- ret = -ENODEV;
+ ret = i2c_mux_add_adapter(muxc, bus, i, 0);
+ if (ret) {
dev_err(&pdev->dev, "Failed to add adapter %d\n", i);
goto err_del_adapter;
}
@@ -234,23 +254,18 @@ static int i2c_mux_pinctrl_probe(struct platform_device *pdev)
return 0;
err_del_adapter:
- for (; i > 0; i--)
- i2c_del_mux_adapter(mux->busses[i - 1]);
- i2c_put_adapter(mux->parent);
+ i2c_mux_del_adapters(muxc);
+ i2c_put_adapter(muxc->parent);
err:
return ret;
}
static int i2c_mux_pinctrl_remove(struct platform_device *pdev)
{
- struct i2c_mux_pinctrl *mux = platform_get_drvdata(pdev);
- int i;
-
- for (i = 0; i < mux->pdata->bus_count; i++)
- i2c_del_mux_adapter(mux->busses[i]);
-
- i2c_put_adapter(mux->parent);
+ struct i2c_mux_core *muxc = platform_get_drvdata(pdev);
+ i2c_mux_del_adapters(muxc);
+ i2c_put_adapter(muxc->parent);
return 0;
}
diff --git a/drivers/i2c/muxes/i2c-mux-reg.c b/drivers/i2c/muxes/i2c-mux-reg.c
index 5fbd5bd0878f..6773cadf7c9f 100644
--- a/drivers/i2c/muxes/i2c-mux-reg.c
+++ b/drivers/i2c/muxes/i2c-mux-reg.c
@@ -21,8 +21,6 @@
#include <linux/slab.h>
struct regmux {
- struct i2c_adapter *parent;
- struct i2c_adapter **adap; /* child busses */
struct i2c_mux_reg_platform_data data;
};
@@ -64,18 +62,16 @@ static int i2c_mux_reg_set(const struct regmux *mux, unsigned int chan_id)
return 0;
}
-static int i2c_mux_reg_select(struct i2c_adapter *adap, void *data,
- unsigned int chan)
+static int i2c_mux_reg_select(struct i2c_mux_core *muxc, u32 chan)
{
- struct regmux *mux = data;
+ struct regmux *mux = i2c_mux_priv(muxc);
return i2c_mux_reg_set(mux, chan);
}
-static int i2c_mux_reg_deselect(struct i2c_adapter *adap, void *data,
- unsigned int chan)
+static int i2c_mux_reg_deselect(struct i2c_mux_core *muxc, u32 chan)
{
- struct regmux *mux = data;
+ struct regmux *mux = i2c_mux_priv(muxc);
if (mux->data.idle_in_use)
return i2c_mux_reg_set(mux, mux->data.idle);
@@ -85,7 +81,7 @@ static int i2c_mux_reg_deselect(struct i2c_adapter *adap, void *data,
#ifdef CONFIG_OF
static int i2c_mux_reg_probe_dt(struct regmux *mux,
- struct platform_device *pdev)
+ struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct device_node *adapter_np, *child;
@@ -107,7 +103,6 @@ static int i2c_mux_reg_probe_dt(struct regmux *mux,
if (!adapter)
return -EPROBE_DEFER;
- mux->parent = adapter;
mux->data.parent = i2c_adapter_id(adapter);
put_device(&adapter->dev);
@@ -161,7 +156,7 @@ static int i2c_mux_reg_probe_dt(struct regmux *mux,
}
#else
static int i2c_mux_reg_probe_dt(struct regmux *mux,
- struct platform_device *pdev)
+ struct platform_device *pdev)
{
return 0;
}
@@ -169,10 +164,10 @@ static int i2c_mux_reg_probe_dt(struct regmux *mux,
static int i2c_mux_reg_probe(struct platform_device *pdev)
{
+ struct i2c_mux_core *muxc;
struct regmux *mux;
struct i2c_adapter *parent;
struct resource *res;
- int (*deselect)(struct i2c_adapter *, void *, u32);
unsigned int class;
int i, ret, nr;
@@ -180,17 +175,9 @@ static int i2c_mux_reg_probe(struct platform_device *pdev)
if (!mux)
return -ENOMEM;
- platform_set_drvdata(pdev, mux);
-
if (dev_get_platdata(&pdev->dev)) {
memcpy(&mux->data, dev_get_platdata(&pdev->dev),
sizeof(mux->data));
-
- parent = i2c_get_adapter(mux->data.parent);
- if (!parent)
- return -EPROBE_DEFER;
-
- mux->parent = parent;
} else {
ret = i2c_mux_reg_probe_dt(mux, pdev);
if (ret < 0) {
@@ -199,6 +186,10 @@ static int i2c_mux_reg_probe(struct platform_device *pdev)
}
}
+ parent = i2c_get_adapter(mux->data.parent);
+ if (!parent)
+ return -EPROBE_DEFER;
+
if (!mux->data.reg) {
dev_info(&pdev->dev,
"Register not set, using platform resource\n");
@@ -215,55 +206,45 @@ static int i2c_mux_reg_probe(struct platform_device *pdev)
return -EINVAL;
}
- mux->adap = devm_kzalloc(&pdev->dev,
- sizeof(*mux->adap) * mux->data.n_values,
- GFP_KERNEL);
- if (!mux->adap) {
- dev_err(&pdev->dev, "Cannot allocate i2c_adapter structure");
+ muxc = i2c_mux_alloc(parent, &pdev->dev, mux->data.n_values, 0, 0,
+ i2c_mux_reg_select, NULL);
+ if (!muxc)
return -ENOMEM;
- }
+ muxc->priv = mux;
+
+ platform_set_drvdata(pdev, muxc);
if (mux->data.idle_in_use)
- deselect = i2c_mux_reg_deselect;
- else
- deselect = NULL;
+ muxc->deselect = i2c_mux_reg_deselect;
for (i = 0; i < mux->data.n_values; i++) {
nr = mux->data.base_nr ? (mux->data.base_nr + i) : 0;
class = mux->data.classes ? mux->data.classes[i] : 0;
- mux->adap[i] = i2c_add_mux_adapter(mux->parent, &pdev->dev, mux,
- nr, mux->data.values[i],
- class, i2c_mux_reg_select,
- deselect);
- if (!mux->adap[i]) {
- ret = -ENODEV;
+ ret = i2c_mux_add_adapter(muxc, nr, mux->data.values[i], class);
+ if (ret) {
dev_err(&pdev->dev, "Failed to add adapter %d\n", i);
goto add_adapter_failed;
}
}
dev_dbg(&pdev->dev, "%d port mux on %s adapter\n",
- mux->data.n_values, mux->parent->name);
+ mux->data.n_values, muxc->parent->name);
return 0;
add_adapter_failed:
- for (; i > 0; i--)
- i2c_del_mux_adapter(mux->adap[i - 1]);
+ i2c_mux_del_adapters(muxc);
return ret;
}
static int i2c_mux_reg_remove(struct platform_device *pdev)
{
- struct regmux *mux = platform_get_drvdata(pdev);
- int i;
-
- for (i = 0; i < mux->data.n_values; i++)
- i2c_del_mux_adapter(mux->adap[i]);
+ struct i2c_mux_core *muxc = platform_get_drvdata(pdev);
- i2c_put_adapter(mux->parent);
+ i2c_mux_del_adapters(muxc);
+ i2c_put_adapter(muxc->parent);
return 0;
}
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c
index 2771106fd650..f62b8bd9ad7e 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c
@@ -183,7 +183,7 @@ int inv_mpu_acpi_create_mux_client(struct i2c_client *client)
} else
return 0; /* no secondary addr, which is OK */
}
- st->mux_client = i2c_new_device(st->mux_adapter, &info);
+ st->mux_client = i2c_new_device(st->muxc->adapter[0], &info);
if (!st->mux_client)
return -ENODEV;
}
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index d192953e9a38..0c2bded2b5b7 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -23,7 +23,6 @@
#include <linux/kfifo.h>
#include <linux/spinlock.h>
#include <linux/iio/iio.h>
-#include <linux/i2c-mux.h>
#include <linux/acpi.h>
#include "inv_mpu_iio.h"
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
index 5ee4e0dc093e..9ba1179105bd 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
@@ -15,7 +15,6 @@
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/i2c.h>
-#include <linux/i2c-mux.h>
#include <linux/iio/iio.h>
#include <linux/module.h>
#include "inv_mpu_iio.h"
@@ -25,46 +24,16 @@ static const struct regmap_config inv_mpu_regmap_config = {
.val_bits = 8,
};
-/*
- * The i2c read/write needs to happen in unlocked mode. As the parent
- * adapter is common. If we use locked versions, it will fail as
- * the mux adapter will lock the parent i2c adapter, while calling
- * select/deselect functions.
- */
-static int inv_mpu6050_write_reg_unlocked(struct i2c_client *client,
- u8 reg, u8 d)
+static int inv_mpu6050_select_bypass(struct i2c_mux_core *muxc, u32 chan_id)
{
- int ret;
- u8 buf[2] = {reg, d};
- struct i2c_msg msg[1] = {
- {
- .addr = client->addr,
- .flags = 0,
- .len = sizeof(buf),
- .buf = buf,
- }
- };
-
- ret = __i2c_transfer(client->adapter, msg, 1);
- if (ret != 1)
- return ret;
-
- return 0;
-}
-
-static int inv_mpu6050_select_bypass(struct i2c_adapter *adap, void *mux_priv,
- u32 chan_id)
-{
- struct i2c_client *client = mux_priv;
- struct iio_dev *indio_dev = dev_get_drvdata(&client->dev);
+ struct iio_dev *indio_dev = i2c_mux_priv(muxc);
struct inv_mpu6050_state *st = iio_priv(indio_dev);
int ret = 0;
/* Use the same mutex which was used everywhere to protect power-op */
mutex_lock(&indio_dev->mlock);
if (!st->powerup_count) {
- ret = inv_mpu6050_write_reg_unlocked(client,
- st->reg->pwr_mgmt_1, 0);
+ ret = regmap_write(st->map, st->reg->pwr_mgmt_1, 0);
if (ret)
goto write_error;
@@ -73,10 +42,9 @@ static int inv_mpu6050_select_bypass(struct i2c_adapter *adap, void *mux_priv,
}
if (!ret) {
st->powerup_count++;
- ret = inv_mpu6050_write_reg_unlocked(client,
- st->reg->int_pin_cfg,
- INV_MPU6050_INT_PIN_CFG |
- INV_MPU6050_BIT_BYPASS_EN);
+ ret = regmap_write(st->map, st->reg->int_pin_cfg,
+ INV_MPU6050_INT_PIN_CFG |
+ INV_MPU6050_BIT_BYPASS_EN);
}
write_error:
mutex_unlock(&indio_dev->mlock);
@@ -84,21 +52,18 @@ write_error:
return ret;
}
-static int inv_mpu6050_deselect_bypass(struct i2c_adapter *adap,
- void *mux_priv, u32 chan_id)
+static int inv_mpu6050_deselect_bypass(struct i2c_mux_core *muxc, u32 chan_id)
{
- struct i2c_client *client = mux_priv;
- struct iio_dev *indio_dev = dev_get_drvdata(&client->dev);
+ struct iio_dev *indio_dev = i2c_mux_priv(muxc);
struct inv_mpu6050_state *st = iio_priv(indio_dev);
mutex_lock(&indio_dev->mlock);
/* It doesn't really mattter, if any of the calls fails */
- inv_mpu6050_write_reg_unlocked(client, st->reg->int_pin_cfg,
- INV_MPU6050_INT_PIN_CFG);
+ regmap_write(st->map, st->reg->int_pin_cfg, INV_MPU6050_INT_PIN_CFG);
st->powerup_count--;
if (!st->powerup_count)
- inv_mpu6050_write_reg_unlocked(client, st->reg->pwr_mgmt_1,
- INV_MPU6050_BIT_SLEEP);
+ regmap_write(st->map, st->reg->pwr_mgmt_1,
+ INV_MPU6050_BIT_SLEEP);
mutex_unlock(&indio_dev->mlock);
return 0;
@@ -160,16 +125,18 @@ static int inv_mpu_probe(struct i2c_client *client,
return result;
st = iio_priv(dev_get_drvdata(&client->dev));
- st->mux_adapter = i2c_add_mux_adapter(client->adapter,
- &client->dev,
- client,
- 0, 0, 0,
- inv_mpu6050_select_bypass,
- inv_mpu6050_deselect_bypass);
- if (!st->mux_adapter) {
- result = -ENODEV;
+ st->muxc = i2c_mux_alloc(client->adapter, &client->dev,
+ 1, 0, I2C_MUX_LOCKED,
+ inv_mpu6050_select_bypass,
+ inv_mpu6050_deselect_bypass);
+ if (!st->muxc) {
+ result = -ENOMEM;
goto out_unreg_device;
}
+ st->muxc->priv = dev_get_drvdata(&client->dev);
+ result = i2c_mux_add_adapter(st->muxc, 0, 0, 0);
+ if (result)
+ goto out_unreg_device;
result = inv_mpu_acpi_create_mux_client(client);
if (result)
@@ -178,7 +145,7 @@ static int inv_mpu_probe(struct i2c_client *client,
return 0;
out_del_mux:
- i2c_del_mux_adapter(st->mux_adapter);
+ i2c_mux_del_adapters(st->muxc);
out_unreg_device:
inv_mpu_core_remove(&client->dev);
return result;
@@ -190,7 +157,7 @@ static int inv_mpu_remove(struct i2c_client *client)
struct inv_mpu6050_state *st = iio_priv(indio_dev);
inv_mpu_acpi_delete_mux_client(client);
- i2c_del_mux_adapter(st->mux_adapter);
+ i2c_mux_del_adapters(st->muxc);
return inv_mpu_core_remove(&client->dev);
}
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
index e302a49703bf..bb3cef6d7059 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -11,6 +11,7 @@
* GNU General Public License for more details.
*/
#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
#include <linux/kfifo.h>
#include <linux/spinlock.h>
#include <linux/iio/iio.h>
@@ -127,7 +128,7 @@ struct inv_mpu6050_state {
const struct inv_mpu6050_hw *hw;
enum inv_devices chip_type;
spinlock_t time_stamp_lock;
- struct i2c_adapter *mux_adapter;
+ struct i2c_mux_core *muxc;
struct i2c_client *mux_client;
unsigned int powerup_count;
struct inv_mpu6050_platform_data plat_data;
diff --git a/drivers/media/dvb-frontends/m88ds3103.c b/drivers/media/dvb-frontends/m88ds3103.c
index 76883600ec6f..5557ef8fc704 100644
--- a/drivers/media/dvb-frontends/m88ds3103.c
+++ b/drivers/media/dvb-frontends/m88ds3103.c
@@ -1251,9 +1251,9 @@ static void m88ds3103_release(struct dvb_frontend *fe)
i2c_unregister_device(client);
}
-static int m88ds3103_select(struct i2c_adapter *adap, void *mux_priv, u32 chan)
+static int m88ds3103_select(struct i2c_mux_core *muxc, u32 chan)
{
- struct m88ds3103_dev *dev = mux_priv;
+ struct m88ds3103_dev *dev = i2c_mux_priv(muxc);
struct i2c_client *client = dev->client;
int ret;
struct i2c_msg msg = {
@@ -1374,7 +1374,7 @@ static struct i2c_adapter *m88ds3103_get_i2c_adapter(struct i2c_client *client)
dev_dbg(&client->dev, "\n");
- return dev->i2c_adapter;
+ return dev->muxc->adapter[0];
}
static int m88ds3103_probe(struct i2c_client *client,
@@ -1467,13 +1467,16 @@ static int m88ds3103_probe(struct i2c_client *client,
goto err_kfree;
/* create mux i2c adapter for tuner */
- dev->i2c_adapter = i2c_add_mux_adapter(client->adapter, &client->dev,
- dev, 0, 0, 0, m88ds3103_select,
- NULL);
- if (dev->i2c_adapter == NULL) {
+ dev->muxc = i2c_mux_alloc(client->adapter, &client->dev, 1, 0, 0,
+ m88ds3103_select, NULL);
+ if (!dev->muxc) {
ret = -ENOMEM;
goto err_kfree;
}
+ dev->muxc->priv = dev;
+ ret = i2c_mux_add_adapter(dev->muxc, 0, 0, 0);
+ if (ret)
+ goto err_kfree;
/* create dvb_frontend */
memcpy(&dev->fe.ops, &m88ds3103_ops, sizeof(struct dvb_frontend_ops));
@@ -1502,7 +1505,7 @@ static int m88ds3103_remove(struct i2c_client *client)
dev_dbg(&client->dev, "\n");
- i2c_del_mux_adapter(dev->i2c_adapter);
+ i2c_mux_del_adapters(dev->muxc);
kfree(dev);
return 0;
diff --git a/drivers/media/dvb-frontends/m88ds3103_priv.h b/drivers/media/dvb-frontends/m88ds3103_priv.h
index 651e005146b2..d78e467295d2 100644
--- a/drivers/media/dvb-frontends/m88ds3103_priv.h
+++ b/drivers/media/dvb-frontends/m88ds3103_priv.h
@@ -42,7 +42,7 @@ struct m88ds3103_dev {
enum fe_status fe_status;
u32 dvbv3_ber; /* for old DVBv3 API read_ber */
bool warm; /* FW running */
- struct i2c_adapter *i2c_adapter;
+ struct i2c_mux_core *muxc;
/* auto detect chip id to do different config */
u8 chip_id;
/* main mclk is calculated for M88RS6000 dynamically */
diff --git a/drivers/media/dvb-frontends/rtl2830.c b/drivers/media/dvb-frontends/rtl2830.c
index 3f96429af0e5..d25d1e0cd4ca 100644
--- a/drivers/media/dvb-frontends/rtl2830.c
+++ b/drivers/media/dvb-frontends/rtl2830.c
@@ -677,9 +677,9 @@ err:
* adapter lock is already taken by tuner driver.
* Gate is closed automatically after single I2C transfer.
*/
-static int rtl2830_select(struct i2c_adapter *adap, void *mux_priv, u32 chan_id)
+static int rtl2830_select(struct i2c_mux_core *muxc, u32 chan_id)
{
- struct i2c_client *client = mux_priv;
+ struct i2c_client *client = i2c_mux_priv(muxc);
struct rtl2830_dev *dev = i2c_get_clientdata(client);
int ret;
@@ -712,7 +712,7 @@ static struct i2c_adapter *rtl2830_get_i2c_adapter(struct i2c_client *client)
dev_dbg(&client->dev, "\n");
- return dev->adapter;
+ return dev->muxc->adapter[0];
}
/*
@@ -865,12 +865,16 @@ static int rtl2830_probe(struct i2c_client *client,
goto err_regmap_exit;
/* create muxed i2c adapter for tuner */
- dev->adapter = i2c_add_mux_adapter(client->adapter, &client->dev,
- client, 0, 0, 0, rtl2830_select, NULL);
- if (dev->adapter == NULL) {
- ret = -ENODEV;
+ dev->muxc = i2c_mux_alloc(client->adapter, &client->dev, 1, 0, 0,
+ rtl2830_select, NULL);
+ if (!dev->muxc) {
+ ret = -ENOMEM;
goto err_regmap_exit;
}
+ dev->muxc->priv = client;
+ ret = i2c_mux_add_adapter(dev->muxc, 0, 0, 0);
+ if (ret)
+ goto err_regmap_exit;
/* create dvb frontend */
memcpy(&dev->fe.ops, &rtl2830_ops, sizeof(dev->fe.ops));
@@ -903,7 +907,7 @@ static int rtl2830_remove(struct i2c_client *client)
/* stop statistics polling */
cancel_delayed_work_sync(&dev->stat_work);
- i2c_del_mux_adapter(dev->adapter);
+ i2c_mux_del_adapters(dev->muxc);
regmap_exit(dev->regmap);
kfree(dev);
diff --git a/drivers/media/dvb-frontends/rtl2830_priv.h b/drivers/media/dvb-frontends/rtl2830_priv.h
index cf793f39a09b..da4909543da2 100644
--- a/drivers/media/dvb-frontends/rtl2830_priv.h
+++ b/drivers/media/dvb-frontends/rtl2830_priv.h
@@ -29,7 +29,7 @@ struct rtl2830_dev {
struct rtl2830_platform_data *pdata;
struct i2c_client *client;
struct regmap *regmap;
- struct i2c_adapter *adapter;
+ struct i2c_mux_core *muxc;
struct dvb_frontend fe;
bool sleeping;
unsigned long filters;
diff --git a/drivers/media/dvb-frontends/rtl2832.c b/drivers/media/dvb-frontends/rtl2832.c
index 7c96f7679669..bfb6beedd40b 100644
--- a/drivers/media/dvb-frontends/rtl2832.c
+++ b/drivers/media/dvb-frontends/rtl2832.c
@@ -153,43 +153,6 @@ static const struct rtl2832_reg_entry registers[] = {
[DVBT_REG_4MSEL] = {0x013, 0, 0},
};
-/* Our regmap is bypassing I2C adapter lock, thus we do it! */
-static int rtl2832_bulk_write(struct i2c_client *client, unsigned int reg,
- const void *val, size_t val_count)
-{
- struct rtl2832_dev *dev = i2c_get_clientdata(client);
- int ret;
-
- i2c_lock_adapter(client->adapter);
- ret = regmap_bulk_write(dev->regmap, reg, val, val_count);
- i2c_unlock_adapter(client->adapter);
- return ret;
-}
-
-static int rtl2832_update_bits(struct i2c_client *client, unsigned int reg,
- unsigned int mask, unsigned int val)
-{
- struct rtl2832_dev *dev = i2c_get_clientdata(client);
- int ret;
-
- i2c_lock_adapter(client->adapter);
- ret = regmap_update_bits(dev->regmap, reg, mask, val);
- i2c_unlock_adapter(client->adapter);
- return ret;
-}
-
-static int rtl2832_bulk_read(struct i2c_client *client, unsigned int reg,
- void *val, size_t val_count)
-{
- struct rtl2832_dev *dev = i2c_get_clientdata(client);
- int ret;
-
- i2c_lock_adapter(client->adapter);
- ret = regmap_bulk_read(dev->regmap, reg, val, val_count);
- i2c_unlock_adapter(client->adapter);
- return ret;
-}
-
static int rtl2832_rd_demod_reg(struct rtl2832_dev *dev, int reg, u32 *val)
{
struct i2c_client *client = dev->client;
@@ -204,7 +167,7 @@ static int rtl2832_rd_demod_reg(struct rtl2832_dev *dev, int reg, u32 *val)
len = (msb >> 3) + 1;
mask = REG_MASK(msb - lsb);
- ret = rtl2832_bulk_read(client, reg_start_addr, reading, len);
+ ret = regmap_bulk_read(dev->regmap, reg_start_addr, reading, len);
if (ret)
goto err;
@@ -234,7 +197,7 @@ static int rtl2832_wr_demod_reg(struct rtl2832_dev *dev, int reg, u32 val)
len = (msb >> 3) + 1;
mask = REG_MASK(msb - lsb);
- ret = rtl2832_bulk_read(client, reg_start_addr, reading, len);
+ ret = regmap_bulk_read(dev->regmap, reg_start_addr, reading, len);
if (ret)
goto err;
@@ -248,7 +211,7 @@ static int rtl2832_wr_demod_reg(struct rtl2832_dev *dev, int reg, u32 val)
for (i = 0; i < len; i++)
writing[i] = (writing_tmp >> ((len - 1 - i) * 8)) & 0xff;
- ret = rtl2832_bulk_write(client, reg_start_addr, writing, len);
+ ret = regmap_bulk_write(dev->regmap, reg_start_addr, writing, len);
if (ret)
goto err;
@@ -525,7 +488,8 @@ static int rtl2832_set_frontend(struct dvb_frontend *fe)
}
for (j = 0; j < sizeof(bw_params[0]); j++) {
- ret = rtl2832_bulk_write(client, 0x11c + j, &bw_params[i][j], 1);
+ ret = regmap_bulk_write(dev->regmap,
+ 0x11c + j, &bw_params[i][j], 1);
if (ret)
goto err;
}
@@ -581,11 +545,11 @@ static int rtl2832_get_frontend(struct dvb_frontend *fe,
if (dev->sleeping)
return 0;
- ret = rtl2832_bulk_read(client, 0x33c, buf, 2);
+ ret = regmap_bulk_read(dev->regmap, 0x33c, buf, 2);
if (ret)
goto err;
- ret = rtl2832_bulk_read(client, 0x351, &buf[2], 1);
+ ret = regmap_bulk_read(dev->regmap, 0x351, &buf[2], 1);
if (ret)
goto err;
@@ -716,7 +680,7 @@ static int rtl2832_read_status(struct dvb_frontend *fe, enum fe_status *status)
/* signal strength */
if (dev->fe_status & FE_HAS_SIGNAL) {
/* read digital AGC */
- ret = rtl2832_bulk_read(client, 0x305, &u8tmp, 1);
+ ret = regmap_bulk_read(dev->regmap, 0x305, &u8tmp, 1);
if (ret)
goto err;
@@ -742,7 +706,7 @@ static int rtl2832_read_status(struct dvb_frontend *fe, enum fe_status *status)
{87659938, 87659938, 87885178, 88241743},
};
- ret = rtl2832_bulk_read(client, 0x33c, &u8tmp, 1);
+ ret = regmap_bulk_read(dev->regmap, 0x33c, &u8tmp, 1);
if (ret)
goto err;
@@ -754,7 +718,7 @@ static int rtl2832_read_status(struct dvb_frontend *fe, enum fe_status *status)
if (hierarchy > HIERARCHY_NUM - 1)
goto err;
- ret = rtl2832_bulk_read(client, 0x40c, buf, 2);
+ ret = regmap_bulk_read(dev->regmap, 0x40c, buf, 2);
if (ret)
goto err;
@@ -775,7 +739,7 @@ static int rtl2832_read_status(struct dvb_frontend *fe, enum fe_status *status)
/* BER */
if (dev->fe_status & FE_HAS_LOCK) {
- ret = rtl2832_bulk_read(client, 0x34e, buf, 2);
+ ret = regmap_bulk_read(dev->regmap, 0x34e, buf, 2);
if (ret)
goto err;
@@ -825,8 +789,6 @@ static int rtl2832_read_ber(struct dvb_frontend *fe, u32 *ber)
/*
* I2C gate/mux/repeater logic
- * We must use unlocked __i2c_transfer() here (through regmap) because of I2C
- * adapter lock is already taken by tuner driver.
* There is delay mechanism to avoid unneeded I2C gate open / close. Gate close
* is delayed here a little bit in order to see if there is sequence of I2C
* messages sent to same I2C bus.
@@ -838,7 +800,7 @@ static void rtl2832_i2c_gate_work(struct work_struct *work)
int ret;
/* close gate */
- ret = rtl2832_update_bits(dev->client, 0x101, 0x08, 0x00);
+ ret = regmap_update_bits(dev->regmap, 0x101, 0x08, 0x00);
if (ret)
goto err;
@@ -847,19 +809,16 @@ err:
dev_dbg(&client->dev, "failed=%d\n", ret);
}
-static int rtl2832_select(struct i2c_adapter *adap, void *mux_priv, u32 chan_id)
+static int rtl2832_select(struct i2c_mux_core *muxc, u32 chan_id)
{
- struct rtl2832_dev *dev = mux_priv;
+ struct rtl2832_dev *dev = i2c_mux_priv(muxc);
struct i2c_client *client = dev->client;
int ret;
/* terminate possible gate closing */
cancel_delayed_work(&dev->i2c_gate_work);
- /*
- * I2C adapter lock is already taken and due to that we will use
- * regmap_update_bits() which does not lock again I2C adapter.
- */
+ /* open gate */
ret = regmap_update_bits(dev->regmap, 0x101, 0x08, 0x08);
if (ret)
goto err;
@@ -870,10 +829,9 @@ err:
return ret;
}
-static int rtl2832_deselect(struct i2c_adapter *adap, void *mux_priv,
- u32 chan_id)
+static int rtl2832_deselect(struct i2c_mux_core *muxc, u32 chan_id)
{
- struct rtl2832_dev *dev = mux_priv;
+ struct rtl2832_dev *dev = i2c_mux_priv(muxc);
schedule_delayed_work(&dev->i2c_gate_work, usecs_to_jiffies(100));
return 0;
@@ -932,120 +890,6 @@ static bool rtl2832_volatile_reg(struct device *dev, unsigned int reg)
return false;
}
-/*
- * We implement own I2C access routines for regmap in order to get manual access
- * to I2C adapter lock, which is needed for I2C mux adapter.
- */
-static int rtl2832_regmap_read(void *context, const void *reg_buf,
- size_t reg_size, void *val_buf, size_t val_size)
-{
- struct i2c_client *client = context;
- int ret;
- struct i2c_msg msg[2] = {
- {
- .addr = client->addr,
- .flags = 0,
- .len = reg_size,
- .buf = (u8 *)reg_buf,
- }, {
- .addr = client->addr,
- .flags = I2C_M_RD,
- .len = val_size,
- .buf = val_buf,
- }
- };
-
- ret = __i2c_transfer(client->adapter, msg, 2);
- if (ret != 2) {
- dev_warn(&client->dev, "i2c reg read failed %d reg %02x\n",
- ret, *(u8 *)reg_buf);
- if (ret >= 0)
- ret = -EREMOTEIO;
- return ret;
- }
- return 0;
-}
-
-static int rtl2832_regmap_write(void *context, const void *data, size_t count)
-{
- struct i2c_client *client = context;
- int ret;
- struct i2c_msg msg[1] = {
- {
- .addr = client->addr,
- .flags = 0,
- .len = count,
- .buf = (u8 *)data,
- }
- };
-
- ret = __i2c_transfer(client->adapter, msg, 1);
- if (ret != 1) {
- dev_warn(&client->dev, "i2c reg write failed %d reg %02x\n",
- ret, *(u8 *)data);
- if (ret >= 0)
- ret = -EREMOTEIO;
- return ret;
- }
- return 0;
-}
-
-static int rtl2832_regmap_gather_write(void *context, const void *reg,
- size_t reg_len, const void *val,
- size_t val_len)
-{
- struct i2c_client *client = context;
- int ret;
- u8 buf[256];
- struct i2c_msg msg[1] = {
- {
- .addr = client->addr,
- .flags = 0,
- .len = 1 + val_len,
- .buf = buf,
- }
- };
-
- buf[0] = *(u8 const *)reg;
- memcpy(&buf[1], val, val_len);
-
- ret = __i2c_transfer(client->adapter, msg, 1);
- if (ret != 1) {
- dev_warn(&client->dev, "i2c reg write failed %d reg %02x\n",
- ret, *(u8 const *)reg);
- if (ret >= 0)
- ret = -EREMOTEIO;
- return ret;
- }
- return 0;
-}
-
-/*
- * FIXME: Hack. Implement own regmap locking in order to silence lockdep
- * recursive lock warning. That happens when regmap I2C client calls I2C mux
- * adapter, which leads demod I2C repeater enable via demod regmap. Operation
- * takes two regmap locks recursively - but those are different regmap instances
- * in a two different I2C drivers, so it is not deadlock. Proper fix is to make
- * regmap aware of lockdep.
- */
-static void rtl2832_regmap_lock(void *__dev)
-{
- struct rtl2832_dev *dev = __dev;
- struct i2c_client *client = dev->client;
-
- dev_dbg(&client->dev, "\n");
- mutex_lock(&dev->regmap_mutex);
-}
-
-static void rtl2832_regmap_unlock(void *__dev)
-{
- struct rtl2832_dev *dev = __dev;
- struct i2c_client *client = dev->client;
-
- dev_dbg(&client->dev, "\n");
- mutex_unlock(&dev->regmap_mutex);
-}
-
static struct dvb_frontend *rtl2832_get_dvb_frontend(struct i2c_client *client)
{
struct rtl2832_dev *dev = i2c_get_clientdata(client);
@@ -1059,7 +903,7 @@ static struct i2c_adapter *rtl2832_get_i2c_adapter(struct i2c_client *client)
struct rtl2832_dev *dev = i2c_get_clientdata(client);
dev_dbg(&client->dev, "\n");
- return dev->i2c_adapter_tuner;
+ return dev->muxc->adapter[0];
}
static int rtl2832_slave_ts_ctrl(struct i2c_client *client, bool enable)
@@ -1073,29 +917,29 @@ static int rtl2832_slave_ts_ctrl(struct i2c_client *client, bool enable)
ret = rtl2832_wr_demod_reg(dev, DVBT_SOFT_RST, 0x0);
if (ret)
goto err;
- ret = rtl2832_bulk_write(client, 0x10c, "\x5f\xff", 2);
+ ret = regmap_bulk_write(dev->regmap, 0x10c, "\x5f\xff", 2);
if (ret)
goto err;
ret = rtl2832_wr_demod_reg(dev, DVBT_PIP_ON, 0x1);
if (ret)
goto err;
- ret = rtl2832_bulk_write(client, 0x0bc, "\x18", 1);
+ ret = regmap_bulk_write(dev->regmap, 0x0bc, "\x18", 1);
if (ret)
goto err;
- ret = rtl2832_bulk_write(client, 0x192, "\x7f\xf7\xff", 3);
+ ret = regmap_bulk_write(dev->regmap, 0x192, "\x7f\xf7\xff", 3);
if (ret)
goto err;
} else {
- ret = rtl2832_bulk_write(client, 0x192, "\x00\x0f\xff", 3);
+ ret = regmap_bulk_write(dev->regmap, 0x192, "\x00\x0f\xff", 3);
if (ret)
goto err;
- ret = rtl2832_bulk_write(client, 0x0bc, "\x08", 1);
+ ret = regmap_bulk_write(dev->regmap, 0x0bc, "\x08", 1);
if (ret)
goto err;
ret = rtl2832_wr_demod_reg(dev, DVBT_PIP_ON, 0x0);
if (ret)
goto err;
- ret = rtl2832_bulk_write(client, 0x10c, "\x00\x00", 2);
+ ret = regmap_bulk_write(dev->regmap, 0x10c, "\x00\x00", 2);
if (ret)
goto err;
ret = rtl2832_wr_demod_reg(dev, DVBT_SOFT_RST, 0x1);
@@ -1124,7 +968,7 @@ static int rtl2832_pid_filter_ctrl(struct dvb_frontend *fe, int onoff)
else
u8tmp = 0x00;
- ret = rtl2832_update_bits(client, 0x061, 0xc0, u8tmp);
+ ret = regmap_update_bits(dev->regmap, 0x061, 0xc0, u8tmp);
if (ret)
goto err;
@@ -1159,14 +1003,14 @@ static int rtl2832_pid_filter(struct dvb_frontend *fe, u8 index, u16 pid,
buf[1] = (dev->filters >> 8) & 0xff;
buf[2] = (dev->filters >> 16) & 0xff;
buf[3] = (dev->filters >> 24) & 0xff;
- ret = rtl2832_bulk_write(client, 0x062, buf, 4);
+ ret = regmap_bulk_write(dev->regmap, 0x062, buf, 4);
if (ret)
goto err;
/* add PID */
buf[0] = (pid >> 8) & 0xff;
buf[1] = (pid >> 0) & 0xff;
- ret = rtl2832_bulk_write(client, 0x066 + 2 * index, buf, 2);
+ ret = regmap_bulk_write(dev->regmap, 0x066 + 2 * index, buf, 2);
if (ret)
goto err;
@@ -1184,12 +1028,6 @@ static int rtl2832_probe(struct i2c_client *client,
struct rtl2832_dev *dev;
int ret;
u8 tmp;
- static const struct regmap_bus regmap_bus = {
- .read = rtl2832_regmap_read,
- .write = rtl2832_regmap_write,
- .gather_write = rtl2832_regmap_gather_write,
- .val_format_endian_default = REGMAP_ENDIAN_NATIVE,
- };
static const struct regmap_range_cfg regmap_range_cfg[] = {
{
.selector_reg = 0x00,
@@ -1218,36 +1056,35 @@ static int rtl2832_probe(struct i2c_client *client,
dev->sleeping = true;
INIT_DELAYED_WORK(&dev->i2c_gate_work, rtl2832_i2c_gate_work);
/* create regmap */
- mutex_init(&dev->regmap_mutex);
dev->regmap_config.reg_bits = 8,
dev->regmap_config.val_bits = 8,
- dev->regmap_config.lock = rtl2832_regmap_lock,
- dev->regmap_config.unlock = rtl2832_regmap_unlock,
- dev->regmap_config.lock_arg = dev,
dev->regmap_config.volatile_reg = rtl2832_volatile_reg,
dev->regmap_config.max_register = 5 * 0x100,
dev->regmap_config.ranges = regmap_range_cfg,
dev->regmap_config.num_ranges = ARRAY_SIZE(regmap_range_cfg),
dev->regmap_config.cache_type = REGCACHE_NONE,
- dev->regmap = regmap_init(&client->dev, &regmap_bus, client,
- &dev->regmap_config);
+ dev->regmap = regmap_init_i2c(client, &dev->regmap_config);
if (IS_ERR(dev->regmap)) {
ret = PTR_ERR(dev->regmap);
goto err_kfree;
}
/* check if the demod is there */
- ret = rtl2832_bulk_read(client, 0x000, &tmp, 1);
+ ret = regmap_bulk_read(dev->regmap, 0x000, &tmp, 1);
if (ret)
goto err_regmap_exit;
/* create muxed i2c adapter for demod tuner bus */
- dev->i2c_adapter_tuner = i2c_add_mux_adapter(i2c, &i2c->dev, dev,
- 0, 0, 0, rtl2832_select, rtl2832_deselect);
- if (dev->i2c_adapter_tuner == NULL) {
- ret = -ENODEV;
+ dev->muxc = i2c_mux_alloc(i2c, &i2c->dev, 1, 0, I2C_MUX_LOCKED,
+ rtl2832_select, rtl2832_deselect);
+ if (!dev->muxc) {
+ ret = -ENOMEM;
goto err_regmap_exit;
}
+ dev->muxc->priv = dev;
+ ret = i2c_mux_add_adapter(dev->muxc, 0, 0, 0);
+ if (ret)
+ goto err_regmap_exit;
/* create dvb_frontend */
memcpy(&dev->fe.ops, &rtl2832_ops, sizeof(struct dvb_frontend_ops));
@@ -1259,9 +1096,7 @@ static int rtl2832_probe(struct i2c_client *client,
pdata->slave_ts_ctrl = rtl2832_slave_ts_ctrl;
pdata->pid_filter = rtl2832_pid_filter;
pdata->pid_filter_ctrl = rtl2832_pid_filter_ctrl;
- pdata->bulk_read = rtl2832_bulk_read;
- pdata->bulk_write = rtl2832_bulk_write;
- pdata->update_bits = rtl2832_update_bits;
+ pdata->regmap = dev->regmap;
dev_info(&client->dev, "Realtek RTL2832 successfully attached\n");
return 0;
@@ -1282,7 +1117,7 @@ static int rtl2832_remove(struct i2c_client *client)
cancel_delayed_work_sync(&dev->i2c_gate_work);
- i2c_del_mux_adapter(dev->i2c_adapter_tuner);
+ i2c_mux_del_adapters(dev->muxc);
regmap_exit(dev->regmap);
diff --git a/drivers/media/dvb-frontends/rtl2832.h b/drivers/media/dvb-frontends/rtl2832.h
index 6390af64cf45..03c0de039fa9 100644
--- a/drivers/media/dvb-frontends/rtl2832.h
+++ b/drivers/media/dvb-frontends/rtl2832.h
@@ -57,9 +57,7 @@ struct rtl2832_platform_data {
int (*pid_filter)(struct dvb_frontend *, u8, u16, int);
int (*pid_filter_ctrl)(struct dvb_frontend *, int);
/* private: Register access for SDR module use only */
- int (*bulk_read)(struct i2c_client *, unsigned int, void *, size_t);
- int (*bulk_write)(struct i2c_client *, unsigned int, const void *, size_t);
- int (*update_bits)(struct i2c_client *, unsigned int, unsigned int, unsigned int);
+ struct regmap *regmap;
};
#endif /* RTL2832_H */
diff --git a/drivers/media/dvb-frontends/rtl2832_priv.h b/drivers/media/dvb-frontends/rtl2832_priv.h
index 6b875f462f8b..c1a8a69e9015 100644
--- a/drivers/media/dvb-frontends/rtl2832_priv.h
+++ b/drivers/media/dvb-frontends/rtl2832_priv.h
@@ -33,10 +33,9 @@
struct rtl2832_dev {
struct rtl2832_platform_data *pdata;
struct i2c_client *client;
- struct mutex regmap_mutex;
struct regmap_config regmap_config;
struct regmap *regmap;
- struct i2c_adapter *i2c_adapter_tuner;
+ struct i2c_mux_core *muxc;
struct dvb_frontend fe;
enum fe_status fe_status;
u64 post_bit_error_prev; /* for old DVBv3 read_ber() calculation */
diff --git a/drivers/media/dvb-frontends/rtl2832_sdr.c b/drivers/media/dvb-frontends/rtl2832_sdr.c
index b860f02a4e55..47a480a7d46c 100644
--- a/drivers/media/dvb-frontends/rtl2832_sdr.c
+++ b/drivers/media/dvb-frontends/rtl2832_sdr.c
@@ -35,6 +35,7 @@
#include <linux/platform_device.h>
#include <linux/jiffies.h>
#include <linux/math64.h>
+#include <linux/regmap.h>
static bool rtl2832_sdr_emulated_fmt;
module_param_named(emulated_formats, rtl2832_sdr_emulated_fmt, bool, 0644);
@@ -119,6 +120,7 @@ struct rtl2832_sdr_dev {
unsigned long flags;
struct platform_device *pdev;
+ struct regmap *regmap;
struct video_device vdev;
struct v4l2_device v4l2_dev;
@@ -163,47 +165,6 @@ struct rtl2832_sdr_dev {
unsigned long jiffies_next;
};
-/* write multiple registers */
-static int rtl2832_sdr_wr_regs(struct rtl2832_sdr_dev *dev, u16 reg,
- const u8 *val, int len)
-{
- struct platform_device *pdev = dev->pdev;
- struct rtl2832_sdr_platform_data *pdata = pdev->dev.platform_data;
- struct i2c_client *client = pdata->i2c_client;
-
- return pdata->bulk_write(client, reg, val, len);
-}
-
-#if 0
-/* read multiple registers */
-static int rtl2832_sdr_rd_regs(struct rtl2832_sdr_dev *dev, u16 reg, u8 *val,
- int len)
-{
- struct platform_device *pdev = dev->pdev;
- struct rtl2832_sdr_platform_data *pdata = pdev->dev.platform_data;
- struct i2c_client *client = pdata->i2c_client;
-
- return pdata->bulk_read(client, reg, val, len);
-}
-#endif
-
-/* write single register */
-static int rtl2832_sdr_wr_reg(struct rtl2832_sdr_dev *dev, u16 reg, u8 val)
-{
- return rtl2832_sdr_wr_regs(dev, reg, &val, 1);
-}
-
-/* write single register with mask */
-static int rtl2832_sdr_wr_reg_mask(struct rtl2832_sdr_dev *dev, u16 reg,
- u8 val, u8 mask)
-{
- struct platform_device *pdev = dev->pdev;
- struct rtl2832_sdr_platform_data *pdata = pdev->dev.platform_data;
- struct i2c_client *client = pdata->i2c_client;
-
- return pdata->update_bits(client, reg, mask, val);
-}
-
/* Private functions */
static struct rtl2832_sdr_frame_buf *rtl2832_sdr_get_next_fill_buf(
struct rtl2832_sdr_dev *dev)
@@ -558,11 +519,11 @@ static int rtl2832_sdr_set_adc(struct rtl2832_sdr_dev *dev)
f_sr = dev->f_adc;
- ret = rtl2832_sdr_wr_regs(dev, 0x13e, "\x00\x00", 2);
+ ret = regmap_bulk_write(dev->regmap, 0x13e, "\x00\x00", 2);
if (ret)
goto err;
- ret = rtl2832_sdr_wr_regs(dev, 0x115, "\x00\x00\x00\x00", 4);
+ ret = regmap_bulk_write(dev->regmap, 0x115, "\x00\x00\x00\x00", 4);
if (ret)
goto err;
@@ -588,7 +549,7 @@ static int rtl2832_sdr_set_adc(struct rtl2832_sdr_dev *dev)
buf[1] = (u32tmp >> 8) & 0xff;
buf[2] = (u32tmp >> 0) & 0xff;
- ret = rtl2832_sdr_wr_regs(dev, 0x119, buf, 3);
+ ret = regmap_bulk_write(dev->regmap, 0x119, buf, 3);
if (ret)
goto err;
@@ -602,15 +563,15 @@ static int rtl2832_sdr_set_adc(struct rtl2832_sdr_dev *dev)
u8tmp2 = 0xcd; /* enable ADC I, ADC Q */
}
- ret = rtl2832_sdr_wr_reg(dev, 0x1b1, u8tmp1);
+ ret = regmap_write(dev->regmap, 0x1b1, u8tmp1);
if (ret)
goto err;
- ret = rtl2832_sdr_wr_reg(dev, 0x008, u8tmp2);
+ ret = regmap_write(dev->regmap, 0x008, u8tmp2);
if (ret)
goto err;
- ret = rtl2832_sdr_wr_reg(dev, 0x006, 0x80);
+ ret = regmap_write(dev->regmap, 0x006, 0x80);
if (ret)
goto err;
@@ -621,168 +582,169 @@ static int rtl2832_sdr_set_adc(struct rtl2832_sdr_dev *dev)
buf[1] = (u32tmp >> 16) & 0xff;
buf[2] = (u32tmp >> 8) & 0xff;
buf[3] = (u32tmp >> 0) & 0xff;
- ret = rtl2832_sdr_wr_regs(dev, 0x19f, buf, 4);
+ ret = regmap_bulk_write(dev->regmap, 0x19f, buf, 4);
if (ret)
goto err;
/* low-pass filter */
- ret = rtl2832_sdr_wr_regs(dev, 0x11c,
- "\xca\xdc\xd7\xd8\xe0\xf2\x0e\x35\x06\x50\x9c\x0d\x71\x11\x14\x71\x74\x19\x41\xa5",
- 20);
+ ret = regmap_bulk_write(dev->regmap, 0x11c,
+ "\xca\xdc\xd7\xd8\xe0\xf2\x0e\x35\x06\x50\x9c\x0d\x71\x11\x14\x71\x74\x19\x41\xa5",
+ 20);
if (ret)
goto err;
- ret = rtl2832_sdr_wr_regs(dev, 0x017, "\x11\x10", 2);
+ ret = regmap_bulk_write(dev->regmap, 0x017, "\x11\x10", 2);
if (ret)
goto err;
/* mode */
- ret = rtl2832_sdr_wr_regs(dev, 0x019, "\x05", 1);
+ ret = regmap_write(dev->regmap, 0x019, 0x05);
if (ret)
goto err;
- ret = rtl2832_sdr_wr_regs(dev, 0x01a, "\x1b\x16\x0d\x06\x01\xff", 6);
+ ret = regmap_bulk_write(dev->regmap, 0x01a,
+ "\x1b\x16\x0d\x06\x01\xff", 6);
if (ret)
goto err;
/* FSM */
- ret = rtl2832_sdr_wr_regs(dev, 0x192, "\x00\xf0\x0f", 3);
+ ret = regmap_bulk_write(dev->regmap, 0x192, "\x00\xf0\x0f", 3);
if (ret)
goto err;
/* PID filter */
- ret = rtl2832_sdr_wr_regs(dev, 0x061, "\x60", 1);
+ ret = regmap_write(dev->regmap, 0x061, 0x60);
if (ret)
goto err;
/* used RF tuner based settings */
switch (pdata->tuner) {
case RTL2832_SDR_TUNER_E4000:
- ret = rtl2832_sdr_wr_regs(dev, 0x112, "\x5a", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x102, "\x40", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x103, "\x5a", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1c7, "\x30", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x104, "\xd0", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x105, "\xbe", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1c8, "\x18", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x106, "\x35", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1c9, "\x21", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1ca, "\x21", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1cb, "\x00", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x107, "\x40", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1cd, "\x10", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1ce, "\x10", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x108, "\x80", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x109, "\x7f", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x10a, "\x80", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x10b, "\x7f", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x00e, "\xfc", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x00e, "\xfc", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x011, "\xd4", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1e5, "\xf0", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1d9, "\x00", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1db, "\x00", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1dd, "\x14", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1de, "\xec", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1d8, "\x0c", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1e6, "\x02", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1d7, "\x09", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x00d, "\x83", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x010, "\x49", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x00d, "\x87", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x00d, "\x85", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x013, "\x02", 1);
+ ret = regmap_write(dev->regmap, 0x112, 0x5a);
+ ret = regmap_write(dev->regmap, 0x102, 0x40);
+ ret = regmap_write(dev->regmap, 0x103, 0x5a);
+ ret = regmap_write(dev->regmap, 0x1c7, 0x30);
+ ret = regmap_write(dev->regmap, 0x104, 0xd0);
+ ret = regmap_write(dev->regmap, 0x105, 0xbe);
+ ret = regmap_write(dev->regmap, 0x1c8, 0x18);
+ ret = regmap_write(dev->regmap, 0x106, 0x35);
+ ret = regmap_write(dev->regmap, 0x1c9, 0x21);
+ ret = regmap_write(dev->regmap, 0x1ca, 0x21);
+ ret = regmap_write(dev->regmap, 0x1cb, 0x00);
+ ret = regmap_write(dev->regmap, 0x107, 0x40);
+ ret = regmap_write(dev->regmap, 0x1cd, 0x10);
+ ret = regmap_write(dev->regmap, 0x1ce, 0x10);
+ ret = regmap_write(dev->regmap, 0x108, 0x80);
+ ret = regmap_write(dev->regmap, 0x109, 0x7f);
+ ret = regmap_write(dev->regmap, 0x10a, 0x80);
+ ret = regmap_write(dev->regmap, 0x10b, 0x7f);
+ ret = regmap_write(dev->regmap, 0x00e, 0xfc);
+ ret = regmap_write(dev->regmap, 0x00e, 0xfc);
+ ret = regmap_write(dev->regmap, 0x011, 0xd4);
+ ret = regmap_write(dev->regmap, 0x1e5, 0xf0);
+ ret = regmap_write(dev->regmap, 0x1d9, 0x00);
+ ret = regmap_write(dev->regmap, 0x1db, 0x00);
+ ret = regmap_write(dev->regmap, 0x1dd, 0x14);
+ ret = regmap_write(dev->regmap, 0x1de, 0xec);
+ ret = regmap_write(dev->regmap, 0x1d8, 0x0c);
+ ret = regmap_write(dev->regmap, 0x1e6, 0x02);
+ ret = regmap_write(dev->regmap, 0x1d7, 0x09);
+ ret = regmap_write(dev->regmap, 0x00d, 0x83);
+ ret = regmap_write(dev->regmap, 0x010, 0x49);
+ ret = regmap_write(dev->regmap, 0x00d, 0x87);
+ ret = regmap_write(dev->regmap, 0x00d, 0x85);
+ ret = regmap_write(dev->regmap, 0x013, 0x02);
break;
case RTL2832_SDR_TUNER_FC0012:
case RTL2832_SDR_TUNER_FC0013:
- ret = rtl2832_sdr_wr_regs(dev, 0x112, "\x5a", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x102, "\x40", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x103, "\x5a", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1c7, "\x2c", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x104, "\xcc", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x105, "\xbe", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1c8, "\x16", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x106, "\x35", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1c9, "\x21", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1ca, "\x21", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1cb, "\x00", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x107, "\x40", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1cd, "\x10", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1ce, "\x10", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x108, "\x80", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x109, "\x7f", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x10a, "\x80", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x10b, "\x7f", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x00e, "\xfc", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x00e, "\xfc", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x011, "\xe9\xbf", 2);
- ret = rtl2832_sdr_wr_regs(dev, 0x1e5, "\xf0", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1d9, "\x00", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1db, "\x00", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1dd, "\x11", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1de, "\xef", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1d8, "\x0c", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1e6, "\x02", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1d7, "\x09", 1);
+ ret = regmap_write(dev->regmap, 0x112, 0x5a);
+ ret = regmap_write(dev->regmap, 0x102, 0x40);
+ ret = regmap_write(dev->regmap, 0x103, 0x5a);
+ ret = regmap_write(dev->regmap, 0x1c7, 0x2c);
+ ret = regmap_write(dev->regmap, 0x104, 0xcc);
+ ret = regmap_write(dev->regmap, 0x105, 0xbe);
+ ret = regmap_write(dev->regmap, 0x1c8, 0x16);
+ ret = regmap_write(dev->regmap, 0x106, 0x35);
+ ret = regmap_write(dev->regmap, 0x1c9, 0x21);
+ ret = regmap_write(dev->regmap, 0x1ca, 0x21);
+ ret = regmap_write(dev->regmap, 0x1cb, 0x00);
+ ret = regmap_write(dev->regmap, 0x107, 0x40);
+ ret = regmap_write(dev->regmap, 0x1cd, 0x10);
+ ret = regmap_write(dev->regmap, 0x1ce, 0x10);
+ ret = regmap_write(dev->regmap, 0x108, 0x80);
+ ret = regmap_write(dev->regmap, 0x109, 0x7f);
+ ret = regmap_write(dev->regmap, 0x10a, 0x80);
+ ret = regmap_write(dev->regmap, 0x10b, 0x7f);
+ ret = regmap_write(dev->regmap, 0x00e, 0xfc);
+ ret = regmap_write(dev->regmap, 0x00e, 0xfc);
+ ret = regmap_bulk_write(dev->regmap, 0x011, "\xe9\xbf", 2);
+ ret = regmap_write(dev->regmap, 0x1e5, 0xf0);
+ ret = regmap_write(dev->regmap, 0x1d9, 0x00);
+ ret = regmap_write(dev->regmap, 0x1db, 0x00);
+ ret = regmap_write(dev->regmap, 0x1dd, 0x11);
+ ret = regmap_write(dev->regmap, 0x1de, 0xef);
+ ret = regmap_write(dev->regmap, 0x1d8, 0x0c);
+ ret = regmap_write(dev->regmap, 0x1e6, 0x02);
+ ret = regmap_write(dev->regmap, 0x1d7, 0x09);
break;
case RTL2832_SDR_TUNER_R820T:
case RTL2832_SDR_TUNER_R828D:
- ret = rtl2832_sdr_wr_regs(dev, 0x112, "\x5a", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x102, "\x40", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x115, "\x01", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x103, "\x80", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1c7, "\x24", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x104, "\xcc", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x105, "\xbe", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1c8, "\x14", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x106, "\x35", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1c9, "\x21", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1ca, "\x21", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1cb, "\x00", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x107, "\x40", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1cd, "\x10", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1ce, "\x10", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x108, "\x80", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x109, "\x7f", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x10a, "\x80", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x10b, "\x7f", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x00e, "\xfc", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x00e, "\xfc", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x011, "\xf4", 1);
+ ret = regmap_write(dev->regmap, 0x112, 0x5a);
+ ret = regmap_write(dev->regmap, 0x102, 0x40);
+ ret = regmap_write(dev->regmap, 0x115, 0x01);
+ ret = regmap_write(dev->regmap, 0x103, 0x80);
+ ret = regmap_write(dev->regmap, 0x1c7, 0x24);
+ ret = regmap_write(dev->regmap, 0x104, 0xcc);
+ ret = regmap_write(dev->regmap, 0x105, 0xbe);
+ ret = regmap_write(dev->regmap, 0x1c8, 0x14);
+ ret = regmap_write(dev->regmap, 0x106, 0x35);
+ ret = regmap_write(dev->regmap, 0x1c9, 0x21);
+ ret = regmap_write(dev->regmap, 0x1ca, 0x21);
+ ret = regmap_write(dev->regmap, 0x1cb, 0x00);
+ ret = regmap_write(dev->regmap, 0x107, 0x40);
+ ret = regmap_write(dev->regmap, 0x1cd, 0x10);
+ ret = regmap_write(dev->regmap, 0x1ce, 0x10);
+ ret = regmap_write(dev->regmap, 0x108, 0x80);
+ ret = regmap_write(dev->regmap, 0x109, 0x7f);
+ ret = regmap_write(dev->regmap, 0x10a, 0x80);
+ ret = regmap_write(dev->regmap, 0x10b, 0x7f);
+ ret = regmap_write(dev->regmap, 0x00e, 0xfc);
+ ret = regmap_write(dev->regmap, 0x00e, 0xfc);
+ ret = regmap_write(dev->regmap, 0x011, 0xf4);
break;
case RTL2832_SDR_TUNER_FC2580:
- ret = rtl2832_sdr_wr_regs(dev, 0x112, "\x39", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x102, "\x40", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x103, "\x5a", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1c7, "\x2c", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x104, "\xcc", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x105, "\xbe", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1c8, "\x16", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x106, "\x35", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1c9, "\x21", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1ca, "\x21", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1cb, "\x00", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x107, "\x40", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1cd, "\x10", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x1ce, "\x10", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x108, "\x80", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x109, "\x7f", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x10a, "\x9c", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x10b, "\x7f", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x00e, "\xfc", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x00e, "\xfc", 1);
- ret = rtl2832_sdr_wr_regs(dev, 0x011, "\xe9\xf4", 2);
+ ret = regmap_write(dev->regmap, 0x112, 0x39);
+ ret = regmap_write(dev->regmap, 0x102, 0x40);
+ ret = regmap_write(dev->regmap, 0x103, 0x5a);
+ ret = regmap_write(dev->regmap, 0x1c7, 0x2c);
+ ret = regmap_write(dev->regmap, 0x104, 0xcc);
+ ret = regmap_write(dev->regmap, 0x105, 0xbe);
+ ret = regmap_write(dev->regmap, 0x1c8, 0x16);
+ ret = regmap_write(dev->regmap, 0x106, 0x35);
+ ret = regmap_write(dev->regmap, 0x1c9, 0x21);
+ ret = regmap_write(dev->regmap, 0x1ca, 0x21);
+ ret = regmap_write(dev->regmap, 0x1cb, 0x00);
+ ret = regmap_write(dev->regmap, 0x107, 0x40);
+ ret = regmap_write(dev->regmap, 0x1cd, 0x10);
+ ret = regmap_write(dev->regmap, 0x1ce, 0x10);
+ ret = regmap_write(dev->regmap, 0x108, 0x80);
+ ret = regmap_write(dev->regmap, 0x109, 0x7f);
+ ret = regmap_write(dev->regmap, 0x10a, 0x9c);
+ ret = regmap_write(dev->regmap, 0x10b, 0x7f);
+ ret = regmap_write(dev->regmap, 0x00e, 0xfc);
+ ret = regmap_write(dev->regmap, 0x00e, 0xfc);
+ ret = regmap_bulk_write(dev->regmap, 0x011, "\xe9\xf4", 2);
break;
default:
dev_notice(&pdev->dev, "Unsupported tuner\n");
}
/* software reset */
- ret = rtl2832_sdr_wr_reg_mask(dev, 0x101, 0x04, 0x04);
+ ret = regmap_update_bits(dev->regmap, 0x101, 0x04, 0x04);
if (ret)
goto err;
- ret = rtl2832_sdr_wr_reg_mask(dev, 0x101, 0x00, 0x04);
+ ret = regmap_update_bits(dev->regmap, 0x101, 0x04, 0x00);
if (ret)
goto err;
err:
@@ -797,29 +759,29 @@ static void rtl2832_sdr_unset_adc(struct rtl2832_sdr_dev *dev)
dev_dbg(&pdev->dev, "\n");
/* PID filter */
- ret = rtl2832_sdr_wr_regs(dev, 0x061, "\xe0", 1);
+ ret = regmap_write(dev->regmap, 0x061, 0xe0);
if (ret)
goto err;
/* mode */
- ret = rtl2832_sdr_wr_regs(dev, 0x019, "\x20", 1);
+ ret = regmap_write(dev->regmap, 0x019, 0x20);
if (ret)
goto err;
- ret = rtl2832_sdr_wr_regs(dev, 0x017, "\x11\x10", 2);
+ ret = regmap_bulk_write(dev->regmap, 0x017, "\x11\x10", 2);
if (ret)
goto err;
/* FSM */
- ret = rtl2832_sdr_wr_regs(dev, 0x192, "\x00\x0f\xff", 3);
+ ret = regmap_bulk_write(dev->regmap, 0x192, "\x00\x0f\xff", 3);
if (ret)
goto err;
- ret = rtl2832_sdr_wr_regs(dev, 0x13e, "\x40\x00", 2);
+ ret = regmap_bulk_write(dev->regmap, 0x13e, "\x40\x00", 2);
if (ret)
goto err;
- ret = rtl2832_sdr_wr_regs(dev, 0x115, "\x06\x3f\xce\xcc", 4);
+ ret = regmap_bulk_write(dev->regmap, 0x115, "\x06\x3f\xce\xcc", 4);
if (ret)
goto err;
err:
@@ -1399,6 +1361,7 @@ static int rtl2832_sdr_probe(struct platform_device *pdev)
subdev = pdata->v4l2_subdev;
dev->v4l2_subdev = pdata->v4l2_subdev;
dev->pdev = pdev;
+ dev->regmap = pdata->regmap;
dev->udev = pdata->dvb_usb_device->udev;
dev->f_adc = bands_adc[0].rangelow;
dev->f_tuner = bands_fm[0].rangelow;
diff --git a/drivers/media/dvb-frontends/rtl2832_sdr.h b/drivers/media/dvb-frontends/rtl2832_sdr.h
index 342ea84860df..d8fc7e7212e3 100644
--- a/drivers/media/dvb-frontends/rtl2832_sdr.h
+++ b/drivers/media/dvb-frontends/rtl2832_sdr.h
@@ -56,10 +56,7 @@ struct rtl2832_sdr_platform_data {
#define RTL2832_SDR_TUNER_R828D 0x2b
u8 tuner;
- struct i2c_client *i2c_client;
- int (*bulk_read)(struct i2c_client *, unsigned int, void *, size_t);
- int (*bulk_write)(struct i2c_client *, unsigned int, const void *, size_t);
- int (*update_bits)(struct i2c_client *, unsigned int, unsigned int, unsigned int);
+ struct regmap *regmap;
struct dvb_frontend *dvb_frontend;
struct v4l2_subdev *v4l2_subdev;
struct dvb_usb_device *dvb_usb_device;
diff --git a/drivers/media/dvb-frontends/si2168.c b/drivers/media/dvb-frontends/si2168.c
index 821a8f481507..108a069fa1ae 100644
--- a/drivers/media/dvb-frontends/si2168.c
+++ b/drivers/media/dvb-frontends/si2168.c
@@ -18,53 +18,23 @@
static const struct dvb_frontend_ops si2168_ops;
-/* Own I2C adapter locking is needed because of I2C gate logic. */
-static int si2168_i2c_master_send_unlocked(const struct i2c_client *client,
- const char *buf, int count)
-{
- int ret;
- struct i2c_msg msg = {
- .addr = client->addr,
- .flags = 0,
- .len = count,
- .buf = (char *)buf,
- };
-
- ret = __i2c_transfer(client->adapter, &msg, 1);
- return (ret == 1) ? count : ret;
-}
-
-static int si2168_i2c_master_recv_unlocked(const struct i2c_client *client,
- char *buf, int count)
-{
- int ret;
- struct i2c_msg msg = {
- .addr = client->addr,
- .flags = I2C_M_RD,
- .len = count,
- .buf = buf,
- };
-
- ret = __i2c_transfer(client->adapter, &msg, 1);
- return (ret == 1) ? count : ret;
-}
-
/* execute firmware command */
-static int si2168_cmd_execute_unlocked(struct i2c_client *client,
- struct si2168_cmd *cmd)
+static int si2168_cmd_execute(struct i2c_client *client, struct si2168_cmd *cmd)
{
+ struct si2168_dev *dev = i2c_get_clientdata(client);
int ret;
unsigned long timeout;
+ mutex_lock(&dev->i2c_mutex);
+
if (cmd->wlen) {
/* write cmd and args for firmware */
- ret = si2168_i2c_master_send_unlocked(client, cmd->args,
- cmd->wlen);
+ ret = i2c_master_send(client, cmd->args, cmd->wlen);
if (ret < 0) {
- goto err;
+ goto err_mutex_unlock;
} else if (ret != cmd->wlen) {
ret = -EREMOTEIO;
- goto err;
+ goto err_mutex_unlock;
}
}
@@ -73,13 +43,12 @@ static int si2168_cmd_execute_unlocked(struct i2c_client *client,
#define TIMEOUT 70
timeout = jiffies + msecs_to_jiffies(TIMEOUT);
while (!time_after(jiffies, timeout)) {
- ret = si2168_i2c_master_recv_unlocked(client, cmd->args,
- cmd->rlen);
+ ret = i2c_master_recv(client, cmd->args, cmd->rlen);
if (ret < 0) {
- goto err;
+ goto err_mutex_unlock;
} else if (ret != cmd->rlen) {
ret = -EREMOTEIO;
- goto err;
+ goto err_mutex_unlock;
}
/* firmware ready? */
@@ -94,32 +63,23 @@ static int si2168_cmd_execute_unlocked(struct i2c_client *client,
/* error bit set? */
if ((cmd->args[0] >> 6) & 0x01) {
ret = -EREMOTEIO;
- goto err;
+ goto err_mutex_unlock;
}
if (!((cmd->args[0] >> 7) & 0x01)) {
ret = -ETIMEDOUT;
- goto err;
+ goto err_mutex_unlock;
}
}
+ mutex_unlock(&dev->i2c_mutex);
return 0;
-err:
+err_mutex_unlock:
+ mutex_unlock(&dev->i2c_mutex);
dev_dbg(&client->dev, "failed=%d\n", ret);
return ret;
}
-static int si2168_cmd_execute(struct i2c_client *client, struct si2168_cmd *cmd)
-{
- int ret;
-
- i2c_lock_adapter(client->adapter);
- ret = si2168_cmd_execute_unlocked(client, cmd);
- i2c_unlock_adapter(client->adapter);
-
- return ret;
-}
-
static int si2168_read_status(struct dvb_frontend *fe, enum fe_status *status)
{
struct i2c_client *client = fe->demodulator_priv;
@@ -610,14 +570,9 @@ static int si2168_get_tune_settings(struct dvb_frontend *fe,
return 0;
}
-/*
- * I2C gate logic
- * We must use unlocked I2C I/O because I2C adapter lock is already taken
- * by the caller (usually tuner driver).
- */
-static int si2168_select(struct i2c_adapter *adap, void *mux_priv, u32 chan)
+static int si2168_select(struct i2c_mux_core *muxc, u32 chan)
{
- struct i2c_client *client = mux_priv;
+ struct i2c_client *client = i2c_mux_priv(muxc);
int ret;
struct si2168_cmd cmd;
@@ -625,7 +580,7 @@ static int si2168_select(struct i2c_adapter *adap, void *mux_priv, u32 chan)
memcpy(cmd.args, "\xc0\x0d\x01", 3);
cmd.wlen = 3;
cmd.rlen = 0;
- ret = si2168_cmd_execute_unlocked(client, &cmd);
+ ret = si2168_cmd_execute(client, &cmd);
if (ret)
goto err;
@@ -635,9 +590,9 @@ err:
return ret;
}
-static int si2168_deselect(struct i2c_adapter *adap, void *mux_priv, u32 chan)
+static int si2168_deselect(struct i2c_mux_core *muxc, u32 chan)
{
- struct i2c_client *client = mux_priv;
+ struct i2c_client *client = i2c_mux_priv(muxc);
int ret;
struct si2168_cmd cmd;
@@ -645,7 +600,7 @@ static int si2168_deselect(struct i2c_adapter *adap, void *mux_priv, u32 chan)
memcpy(cmd.args, "\xc0\x0d\x00", 3);
cmd.wlen = 3;
cmd.rlen = 0;
- ret = si2168_cmd_execute_unlocked(client, &cmd);
+ ret = si2168_cmd_execute(client, &cmd);
if (ret)
goto err;
@@ -708,18 +663,25 @@ static int si2168_probe(struct i2c_client *client,
goto err;
}
+ mutex_init(&dev->i2c_mutex);
+
/* create mux i2c adapter for tuner */
- dev->adapter = i2c_add_mux_adapter(client->adapter, &client->dev,
- client, 0, 0, 0, si2168_select, si2168_deselect);
- if (dev->adapter == NULL) {
- ret = -ENODEV;
+ dev->muxc = i2c_mux_alloc(client->adapter, &client->dev,
+ 1, 0, I2C_MUX_LOCKED,
+ si2168_select, si2168_deselect);
+ if (!dev->muxc) {
+ ret = -ENOMEM;
goto err_kfree;
}
+ dev->muxc->priv = client;
+ ret = i2c_mux_add_adapter(dev->muxc, 0, 0, 0);
+ if (ret)
+ goto err_kfree;
/* create dvb_frontend */
memcpy(&dev->fe.ops, &si2168_ops, sizeof(struct dvb_frontend_ops));
dev->fe.demodulator_priv = client;
- *config->i2c_adapter = dev->adapter;
+ *config->i2c_adapter = dev->muxc->adapter[0];
*config->fe = &dev->fe;
dev->ts_mode = config->ts_mode;
dev->ts_clock_inv = config->ts_clock_inv;
@@ -743,7 +705,7 @@ static int si2168_remove(struct i2c_client *client)
dev_dbg(&client->dev, "\n");
- i2c_del_mux_adapter(dev->adapter);
+ i2c_mux_del_adapters(dev->muxc);
dev->fe.ops.release = NULL;
dev->fe.demodulator_priv = NULL;
diff --git a/drivers/media/dvb-frontends/si2168_priv.h b/drivers/media/dvb-frontends/si2168_priv.h
index c07e6fe2cb10..8a1f36d2014d 100644
--- a/drivers/media/dvb-frontends/si2168_priv.h
+++ b/drivers/media/dvb-frontends/si2168_priv.h
@@ -29,7 +29,8 @@
/* state struct */
struct si2168_dev {
- struct i2c_adapter *adapter;
+ struct mutex i2c_mutex;
+ struct i2c_mux_core *muxc;
struct dvb_frontend fe;
enum fe_delivery_system delivery_system;
enum fe_status fe_status;
diff --git a/drivers/media/usb/cx231xx/cx231xx-core.c b/drivers/media/usb/cx231xx/cx231xx-core.c
index 6741fd02b50f..630f4fc5155f 100644
--- a/drivers/media/usb/cx231xx/cx231xx-core.c
+++ b/drivers/media/usb/cx231xx/cx231xx-core.c
@@ -1305,6 +1305,9 @@ int cx231xx_dev_init(struct cx231xx *dev)
cx231xx_i2c_register(&dev->i2c_bus[1]);
cx231xx_i2c_register(&dev->i2c_bus[2]);
+ errCode = cx231xx_i2c_mux_create(dev);
+ if (errCode < 0)
+ return errCode;
cx231xx_i2c_mux_register(dev, 0);
cx231xx_i2c_mux_register(dev, 1);
@@ -1427,8 +1430,7 @@ EXPORT_SYMBOL_GPL(cx231xx_dev_init);
void cx231xx_dev_uninit(struct cx231xx *dev)
{
/* Un Initialize I2C bus */
- cx231xx_i2c_mux_unregister(dev, 1);
- cx231xx_i2c_mux_unregister(dev, 0);
+ cx231xx_i2c_mux_unregister(dev);
cx231xx_i2c_unregister(&dev->i2c_bus[2]);
cx231xx_i2c_unregister(&dev->i2c_bus[1]);
cx231xx_i2c_unregister(&dev->i2c_bus[0]);
diff --git a/drivers/media/usb/cx231xx/cx231xx-i2c.c b/drivers/media/usb/cx231xx/cx231xx-i2c.c
index a29c345b027d..473cd3433fe5 100644
--- a/drivers/media/usb/cx231xx/cx231xx-i2c.c
+++ b/drivers/media/usb/cx231xx/cx231xx-i2c.c
@@ -557,40 +557,41 @@ int cx231xx_i2c_unregister(struct cx231xx_i2c *bus)
* cx231xx_i2c_mux_select()
* switch i2c master number 1 between port1 and port3
*/
-static int cx231xx_i2c_mux_select(struct i2c_adapter *adap,
- void *mux_priv, u32 chan_id)
+static int cx231xx_i2c_mux_select(struct i2c_mux_core *muxc, u32 chan_id)
{
- struct cx231xx *dev = mux_priv;
+ struct cx231xx *dev = i2c_mux_priv(muxc);
return cx231xx_enable_i2c_port_3(dev, chan_id);
}
+int cx231xx_i2c_mux_create(struct cx231xx *dev)
+{
+ dev->muxc = i2c_mux_alloc(&dev->i2c_bus[1].i2c_adap, dev->dev, 2, 0, 0,
+ cx231xx_i2c_mux_select, NULL);
+ if (!dev->muxc)
+ return -ENOMEM;
+ dev->muxc->priv = dev;
+ return 0;
+}
+
int cx231xx_i2c_mux_register(struct cx231xx *dev, int mux_no)
{
- struct i2c_adapter *i2c_parent = &dev->i2c_bus[1].i2c_adap;
- /* what is the correct mux_dev? */
- struct device *mux_dev = dev->dev;
-
- dev->i2c_mux_adap[mux_no] = i2c_add_mux_adapter(i2c_parent,
- mux_dev,
- dev /* mux_priv */,
- 0,
- mux_no /* chan_id */,
- 0 /* class */,
- &cx231xx_i2c_mux_select,
- NULL);
-
- if (!dev->i2c_mux_adap[mux_no])
+ int rc;
+
+ rc = i2c_mux_add_adapter(dev->muxc,
+ 0,
+ mux_no /* chan_id */,
+ 0 /* class */);
+ if (rc)
dev_warn(dev->dev,
"i2c mux %d register FAILED\n", mux_no);
- return 0;
+ return rc;
}
-void cx231xx_i2c_mux_unregister(struct cx231xx *dev, int mux_no)
+void cx231xx_i2c_mux_unregister(struct cx231xx *dev)
{
- i2c_del_mux_adapter(dev->i2c_mux_adap[mux_no]);
- dev->i2c_mux_adap[mux_no] = NULL;
+ i2c_mux_del_adapters(dev->muxc);
}
struct i2c_adapter *cx231xx_get_i2c_adap(struct cx231xx *dev, int i2c_port)
@@ -603,9 +604,9 @@ struct i2c_adapter *cx231xx_get_i2c_adap(struct cx231xx *dev, int i2c_port)
case I2C_2:
return &dev->i2c_bus[2].i2c_adap;
case I2C_1_MUX_1:
- return dev->i2c_mux_adap[0];
+ return dev->muxc->adapter[0];
case I2C_1_MUX_3:
- return dev->i2c_mux_adap[1];
+ return dev->muxc->adapter[1];
default:
return NULL;
}
diff --git a/drivers/media/usb/cx231xx/cx231xx.h b/drivers/media/usb/cx231xx/cx231xx.h
index 69f6d20870f5..90c867683076 100644
--- a/drivers/media/usb/cx231xx/cx231xx.h
+++ b/drivers/media/usb/cx231xx/cx231xx.h
@@ -624,6 +624,7 @@ struct cx231xx {
/* I2C adapters: Master 1 & 2 (External) & Master 3 (Internal only) */
struct cx231xx_i2c i2c_bus[3];
+ struct i2c_mux_core *muxc;
struct i2c_adapter *i2c_mux_adap[2];
unsigned int xc_fw_load_done:1;
@@ -760,8 +761,9 @@ int cx231xx_reset_analog_tuner(struct cx231xx *dev);
void cx231xx_do_i2c_scan(struct cx231xx *dev, int i2c_port);
int cx231xx_i2c_register(struct cx231xx_i2c *bus);
int cx231xx_i2c_unregister(struct cx231xx_i2c *bus);
+int cx231xx_i2c_mux_create(struct cx231xx *dev);
int cx231xx_i2c_mux_register(struct cx231xx *dev, int mux_no);
-void cx231xx_i2c_mux_unregister(struct cx231xx *dev, int mux_no);
+void cx231xx_i2c_mux_unregister(struct cx231xx *dev);
struct i2c_adapter *cx231xx_get_i2c_adap(struct cx231xx *dev, int i2c_port);
/* Internal block control functions */
diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
index fa72642d41f3..eb7af8cb8aca 100644
--- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
+++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
@@ -1333,10 +1333,7 @@ static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap)
case TUNER_RTL2832_R828D:
pdata.clk = dev->rtl2832_platform_data.clk;
pdata.tuner = dev->tuner;
- pdata.i2c_client = dev->i2c_client_demod;
- pdata.bulk_read = dev->rtl2832_platform_data.bulk_read;
- pdata.bulk_write = dev->rtl2832_platform_data.bulk_write;
- pdata.update_bits = dev->rtl2832_platform_data.update_bits;
+ pdata.regmap = dev->rtl2832_platform_data.regmap;
pdata.dvb_frontend = adap->fe[0];
pdata.dvb_usb_device = d;
pdata.v4l2_subdev = subdev;
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 089d6943f68a..6cc17b7779a5 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -245,8 +245,7 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf,
if (status == count)
return count;
- /* REVISIT: at HZ=100, this is sloooow */
- msleep(1);
+ usleep_range(1000, 1500);
} while (time_before(read_time, timeout));
return -ETIMEDOUT;
@@ -365,8 +364,7 @@ static ssize_t at24_eeprom_write(struct at24_data *at24, const char *buf,
if (status == count)
return count;
- /* REVISIT: at HZ=100, this is sloooow */
- msleep(1);
+ usleep_range(1000, 1500);
} while (time_before(write_time, timeout));
return -ETIMEDOUT;
@@ -544,10 +542,7 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
} else {
return -EPFNOSUPPORT;
}
- }
- /* Use I2C operations unless we're stuck with SMBus extensions. */
- if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
if (i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)) {
use_smbus_write = I2C_SMBUS_I2C_BLOCK_DATA;
diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
index e986e6ee52e0..c1ebbfb79453 100644
--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -1692,13 +1692,7 @@ static struct i2c_driver unittest_i2c_dev_driver = {
#if IS_BUILTIN(CONFIG_I2C_MUX)
-struct unittest_i2c_mux_data {
- int nchans;
- struct i2c_adapter *adap[];
-};
-
-static int unittest_i2c_mux_select_chan(struct i2c_adapter *adap,
- void *client, u32 chan)
+static int unittest_i2c_mux_select_chan(struct i2c_mux_core *muxc, u32 chan)
{
return 0;
}
@@ -1706,11 +1700,11 @@ static int unittest_i2c_mux_select_chan(struct i2c_adapter *adap,
static int unittest_i2c_mux_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- int ret, i, nchans, size;
+ int ret, i, nchans;
struct device *dev = &client->dev;
struct i2c_adapter *adap = to_i2c_adapter(dev->parent);
struct device_node *np = client->dev.of_node, *child;
- struct unittest_i2c_mux_data *stm;
+ struct i2c_mux_core *muxc;
u32 reg, max_reg;
dev_dbg(dev, "%s for node @%s\n", __func__, np->full_name);
@@ -1734,25 +1728,20 @@ static int unittest_i2c_mux_probe(struct i2c_client *client,
return -EINVAL;
}
- size = offsetof(struct unittest_i2c_mux_data, adap[nchans]);
- stm = devm_kzalloc(dev, size, GFP_KERNEL);
- if (!stm) {
- dev_err(dev, "Out of memory\n");
+ muxc = i2c_mux_alloc(adap, dev, nchans, 0, 0,
+ unittest_i2c_mux_select_chan, NULL);
+ if (!muxc)
return -ENOMEM;
- }
- stm->nchans = nchans;
for (i = 0; i < nchans; i++) {
- stm->adap[i] = i2c_add_mux_adapter(adap, dev, client,
- 0, i, 0, unittest_i2c_mux_select_chan, NULL);
- if (!stm->adap[i]) {
+ ret = i2c_mux_add_adapter(muxc, 0, i, 0);
+ if (ret) {
dev_err(dev, "Failed to register mux #%d\n", i);
- for (i--; i >= 0; i--)
- i2c_del_mux_adapter(stm->adap[i]);
+ i2c_mux_del_adapters(muxc);
return -ENODEV;
}
}
- i2c_set_clientdata(client, stm);
+ i2c_set_clientdata(client, muxc);
return 0;
};
@@ -1761,12 +1750,10 @@ static int unittest_i2c_mux_remove(struct i2c_client *client)
{
struct device *dev = &client->dev;
struct device_node *np = client->dev.of_node;
- struct unittest_i2c_mux_data *stm = i2c_get_clientdata(client);
- int i;
+ struct i2c_mux_core *muxc = i2c_get_clientdata(client);
dev_dbg(dev, "%s for node @%s\n", __func__, np->full_name);
- for (i = stm->nchans - 1; i >= 0; i--)
- i2c_del_mux_adapter(stm->adap[i]);
+ i2c_mux_del_adapters(muxc);
return 0;
}
diff --git a/include/linux/i2c-mux.h b/include/linux/i2c-mux.h
index b5f9a007a3ab..d4c1d12f900d 100644
--- a/include/linux/i2c-mux.h
+++ b/include/linux/i2c-mux.h
@@ -27,22 +27,49 @@
#ifdef __KERNEL__
+#include <linux/bitops.h>
+
+struct i2c_mux_core {
+ struct i2c_adapter *parent;
+ struct device *dev;
+ bool mux_locked;
+
+ void *priv;
+
+ int (*select)(struct i2c_mux_core *, u32 chan_id);
+ int (*deselect)(struct i2c_mux_core *, u32 chan_id);
+
+ int num_adapters;
+ int max_adapters;
+ struct i2c_adapter *adapter[0];
+};
+
+struct i2c_mux_core *i2c_mux_alloc(struct i2c_adapter *parent,
+ struct device *dev, int max_adapters,
+ int sizeof_priv, u32 flags,
+ int (*select)(struct i2c_mux_core *, u32),
+ int (*deselect)(struct i2c_mux_core *, u32));
+
+/* flags for i2c_mux_alloc */
+#define I2C_MUX_LOCKED BIT(0)
+
+static inline void *i2c_mux_priv(struct i2c_mux_core *muxc)
+{
+ return muxc->priv;
+}
+
+struct i2c_adapter *i2c_root_adapter(struct device *dev);
+
/*
- * Called to create a i2c bus on a multiplexed bus segment.
- * The mux_dev and chan_id parameters are passed to the select
- * and deselect callback functions to perform hardware-specific
- * mux control.
+ * Called to create an i2c bus on a multiplexed bus segment.
+ * The chan_id parameter is passed to the select and deselect
+ * callback functions to perform hardware-specific mux control.
*/
-struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent,
- struct device *mux_dev,
- void *mux_priv, u32 force_nr, u32 chan_id,
- unsigned int class,
- int (*select) (struct i2c_adapter *,
- void *mux_dev, u32 chan_id),
- int (*deselect) (struct i2c_adapter *,
- void *mux_dev, u32 chan_id));
-
-void i2c_del_mux_adapter(struct i2c_adapter *adap);
+int i2c_mux_add_adapter(struct i2c_mux_core *muxc,
+ u32 force_nr, u32 chan_id,
+ unsigned int class);
+
+void i2c_mux_del_adapters(struct i2c_mux_core *muxc);
#endif /* __KERNEL__ */
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 200cf13b00f6..96a25ae14494 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -524,6 +524,7 @@ struct i2c_adapter {
/* data fields that are valid for all devices */
struct rt_mutex bus_lock;
+ struct rt_mutex mux_lock;
int timeout; /* in jiffies */
int retries;
@@ -538,6 +539,10 @@ struct i2c_adapter {
struct i2c_bus_recovery_info *bus_recovery_info;
const struct i2c_adapter_quirks *quirks;
+
+ void (*lock_bus)(struct i2c_adapter *, unsigned int flags);
+ int (*trylock_bus)(struct i2c_adapter *, unsigned int flags);
+ void (*unlock_bus)(struct i2c_adapter *, unsigned int flags);
};
#define to_i2c_adapter(d) container_of(d, struct i2c_adapter, dev)
@@ -567,8 +572,44 @@ i2c_parent_is_i2c_adapter(const struct i2c_adapter *adapter)
int i2c_for_each_dev(void *data, int (*fn)(struct device *, void *));
/* Adapter locking functions, exported for shared pin cases */
-void i2c_lock_adapter(struct i2c_adapter *);
-void i2c_unlock_adapter(struct i2c_adapter *);
+#define I2C_LOCK_ROOT_ADAPTER BIT(0)
+#define I2C_LOCK_SEGMENT BIT(1)
+
+/**
+ * i2c_lock_bus - Get exclusive access to an I2C bus segment
+ * @adapter: Target I2C bus segment
+ * @flags: I2C_LOCK_ROOT_ADAPTER locks the root i2c adapter, I2C_LOCK_SEGMENT
+ * locks only this branch in the adapter tree
+ */
+static inline void
+i2c_lock_bus(struct i2c_adapter *adapter, unsigned int flags)
+{
+ adapter->lock_bus(adapter, flags);
+}
+
+/**
+ * i2c_unlock_bus - Release exclusive access to an I2C bus segment
+ * @adapter: Target I2C bus segment
+ * @flags: I2C_LOCK_ROOT_ADAPTER unlocks the root i2c adapter, I2C_LOCK_SEGMENT
+ * unlocks only this branch in the adapter tree
+ */
+static inline void
+i2c_unlock_bus(struct i2c_adapter *adapter, unsigned int flags)
+{
+ adapter->unlock_bus(adapter, flags);
+}
+
+static inline void
+i2c_lock_adapter(struct i2c_adapter *adapter)
+{
+ i2c_lock_bus(adapter, I2C_LOCK_ROOT_ADAPTER);
+}
+
+static inline void
+i2c_unlock_adapter(struct i2c_adapter *adapter)
+{
+ i2c_unlock_bus(adapter, I2C_LOCK_ROOT_ADAPTER);
+}
/*flags for the client struct: */
#define I2C_CLIENT_PEC 0x04 /* Use Packet Error Checking */
@@ -654,6 +695,11 @@ static inline int i2c_adapter_id(struct i2c_adapter *adap)
return adap->nr;
}
+static inline u8 i2c_8bit_addr_from_msg(const struct i2c_msg *msg)
+{
+ return (msg->addr << 1) | (msg->flags & I2C_M_RD ? 1 : 0);
+}
+
/**
* module_i2c_driver() - Helper macro for registering a modular I2C driver
* @__i2c_driver: i2c_driver struct
diff --git a/include/uapi/linux/i2c.h b/include/uapi/linux/i2c.h
index b0a7dd61eb35..adcbef4bff61 100644
--- a/include/uapi/linux/i2c.h
+++ b/include/uapi/linux/i2c.h
@@ -68,14 +68,15 @@
struct i2c_msg {
__u16 addr; /* slave address */
__u16 flags;
-#define I2C_M_TEN 0x0010 /* this is a ten bit chip address */
#define I2C_M_RD 0x0001 /* read data, from slave to master */
-#define I2C_M_STOP 0x8000 /* if I2C_FUNC_PROTOCOL_MANGLING */
-#define I2C_M_NOSTART 0x4000 /* if I2C_FUNC_NOSTART */
-#define I2C_M_REV_DIR_ADDR 0x2000 /* if I2C_FUNC_PROTOCOL_MANGLING */
-#define I2C_M_IGNORE_NAK 0x1000 /* if I2C_FUNC_PROTOCOL_MANGLING */
-#define I2C_M_NO_RD_ACK 0x0800 /* if I2C_FUNC_PROTOCOL_MANGLING */
+ /* I2C_M_RD is guaranteed to be 0x0001! */
+#define I2C_M_TEN 0x0010 /* this is a ten bit chip address */
#define I2C_M_RECV_LEN 0x0400 /* length will be first received byte */
+#define I2C_M_NO_RD_ACK 0x0800 /* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_IGNORE_NAK 0x1000 /* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_REV_DIR_ADDR 0x2000 /* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_NOSTART 0x4000 /* if I2C_FUNC_NOSTART */
+#define I2C_M_STOP 0x8000 /* if I2C_FUNC_PROTOCOL_MANGLING */
__u16 len; /* msg length */
__u8 *buf; /* pointer to msg data */
};