usb: dwc3: Add function suspend and function wakeup support

USB host sends function suspend and function resume notifications to
the interface through SET_FEATURE/CLEAR_FEATURE setup packets.
Add support to handle these packets by delegating the requests to
composite layer. Also add support to handle function wake notification
requests to exit from function suspend state.

Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
Link: https://lore.kernel.org/r/1679694482-16430-5-git-send-email-quic_eserrao@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 files changed, 51 insertions, 8 deletions

diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 8541708ed2cb..26c8efefbff9 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -527,6 +527,7 @@
 #define DWC3_DGCMD_SET_ENDPOINT_NRDY	0x0c
 #define DWC3_DGCMD_SET_ENDPOINT_PRIME	0x0d
 #define DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK	0x10
+#define DWC3_DGCMD_DEV_NOTIFICATION	0x07
 
 #define DWC3_DGCMD_STATUS(n)		(((n) >> 12) & 0x0F)
 #define DWC3_DGCMD_CMDACT		BIT(10)
@@ -539,6 +540,8 @@
 #define DWC3_DGCMDPAR_TX_FIFO			BIT(5)
 #define DWC3_DGCMDPAR_LOOPBACK_DIS		(0 << 0)
 #define DWC3_DGCMDPAR_LOOPBACK_ENA		BIT(0)
+#define DWC3_DGCMDPAR_DN_FUNC_WAKE		BIT(0)
+#define DWC3_DGCMDPAR_INTF_SEL(n)		((n) << 4)
 
 /* Device Endpoint Command Register */
 #define DWC3_DEPCMD_PARAM_SHIFT		16
diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h
index 8bb2c9e3b9ac..09d703852a92 100644
--- a/drivers/usb/dwc3/debug.h
+++ b/drivers/usb/dwc3/debug.h
@@ -72,6 +72,8 @@ dwc3_gadget_generic_cmd_string(u8 cmd)
 		return "Set Endpoint Prime";
 	case DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK:
 		return "Run SoC Bus Loopback Test";
+	case DWC3_DGCMD_DEV_NOTIFICATION:
+		return "Device Notification";
 	default:
 		return "UNKNOWN";
 	}
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 8aa14a596406..953b752a5052 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -30,6 +30,8 @@
 static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep);
 static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
 		struct dwc3_ep *dep, struct dwc3_request *req);
+static int dwc3_ep0_delegate_req(struct dwc3 *dwc,
+				 struct usb_ctrlrequest *ctrl);
 
 static void dwc3_ep0_prepare_one_trb(struct dwc3_ep *dep,
 		dma_addr_t buf_dma, u32 len, u32 type, bool chain)
@@ -368,7 +370,7 @@ static int dwc3_ep0_handle_status(struct dwc3 *dwc,
 		 * Function Remote Wake Capable	D0
 		 * Function Remote Wakeup	D1
 		 */
-		break;
+		return dwc3_ep0_delegate_req(dwc, ctrl);
 
 	case USB_RECIP_ENDPOINT:
 		dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex);
@@ -517,13 +519,7 @@ static int dwc3_ep0_handle_intf(struct dwc3 *dwc,
 
 	switch (wValue) {
 	case USB_INTRF_FUNC_SUSPEND:
-		/*
-		 * REVISIT: Ideally we would enable some low power mode here,
-		 * however it's unclear what we should be doing here.
-		 *
-		 * For now, we're not doing anything, just making sure we return
-		 * 0 so USB Command Verifier tests pass without any errors.
-		 */
+		ret = dwc3_ep0_delegate_req(dwc, ctrl);
 		break;
 	default:
 		ret = -EINVAL;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 7ceff08a1b8c..287ea6ee2463 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2395,6 +2395,47 @@ static int dwc3_gadget_wakeup(struct usb_gadget *g)
 	return ret;
 }
 
+static void dwc3_resume_gadget(struct dwc3 *dwc);
+
+static int dwc3_gadget_func_wakeup(struct usb_gadget *g, int intf_id)
+{
+	struct  dwc3		*dwc = gadget_to_dwc(g);
+	unsigned long		flags;
+	int			ret;
+	int			link_state;
+
+	if (!dwc->wakeup_configured) {
+		dev_err(dwc->dev, "remote wakeup not configured\n");
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	/*
+	 * If the link is in U3, signal for remote wakeup and wait for the
+	 * link to transition to U0 before sending device notification.
+	 */
+	link_state = dwc3_gadget_get_link_state(dwc);
+	if (link_state == DWC3_LINK_STATE_U3) {
+		ret = __dwc3_gadget_wakeup(dwc, false);
+		if (ret) {
+			spin_unlock_irqrestore(&dwc->lock, flags);
+			return -EINVAL;
+		}
+		dwc3_resume_gadget(dwc);
+		dwc->link_state = DWC3_LINK_STATE_U0;
+	}
+
+	ret = dwc3_send_gadget_generic_command(dwc, DWC3_DGCMD_DEV_NOTIFICATION,
+					       DWC3_DGCMDPAR_DN_FUNC_WAKE |
+					       DWC3_DGCMDPAR_INTF_SEL(intf_id));
+	if (ret)
+		dev_err(dwc->dev, "function remote wakeup failed, ret:%d\n", ret);
+
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return ret;
+}
+
 static int dwc3_gadget_set_remote_wakeup(struct usb_gadget *g, int set)
 {
 	struct dwc3		*dwc = gadget_to_dwc(g);
@@ -3032,6 +3073,7 @@ static void dwc3_gadget_async_callbacks(struct usb_gadget *g, bool enable)
 static const struct usb_gadget_ops dwc3_gadget_ops = {
 	.get_frame		= dwc3_gadget_get_frame,
 	.wakeup			= dwc3_gadget_wakeup,
+	.func_wakeup		= dwc3_gadget_func_wakeup,
 	.set_remote_wakeup	= dwc3_gadget_set_remote_wakeup,
 	.set_selfpowered	= dwc3_gadget_set_selfpowered,
 	.pullup			= dwc3_gadget_pullup,