diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2021-11-03 16:56:03 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2021-11-03 16:56:03 -0700 |
| commit | ae45d84fc36d01dcb1007f4298871eec37907904 (patch) | |
| tree | 718d3c1ae88d675af01af6c701e93c34361a0371 | |
| parent | 2219b0ceefe835b92a8a74a73fe964aa052742a2 (diff) | |
| parent | c17c7cc775b31ab54e8cba05f9e7b16fd32dd84f (diff) | |
Merge tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC DT updates from Arnd Bergmann:
"This is a rather large update for the ARM devicetree files, after a
few quieter releases, with 775 total commits and 47 branches pulled
into this one.
There are 5 new SoC types plus some minor variations, and a total of
60 new machines, so I'm limiting the summary to the main noteworthy
items:
- Apple M1 gain support for PCI and pinctrl, getting a bit closer to
a usable system out of the box.
- Qualcomm gains support for Snapdragon 690 (aka SM6350) as well as
SM7225, 11 new smartphones, and three additional Chromebooks, and
improvements all over the place.
- Samsung gains support for ExynosAutov9, an automotive version of
their smartphone SoC, but otherwise no major changes.
- Microchip adds the SAMA5D29 SoC in the SAMA5 family, and a number
of improvements for the recently added SAMA7 family. The LAN966 SoC
that was added in the platform code does not have dts files yet.
Two board files are added for the older at91sam9g20 SoC
- Aspeed supports two additional server boards using their AST2600 as
BMC, and improves support for qemu models
- Rockchip RK3566/RK3688 gets added, along with six new development
boards using RK3328/RK3399/RK3566, and one Chromebook tablet.
- Two NAS boxes are added using the ARMv4 based Gemini platform
- One new board is added to the Intel Arria SoC FPGA family
- Marvell adds one network switch based on Armada 381 and the new
MOCHAbin 7040 development board
- NXP adds support for the S32G2 automotive SoC, two imx6 based ebook
readers, and three additional development boards, which is notably
less than their usual additions, but they also gain improvements to
their many existing boards
- STmicroelectronics adds their stm32mp13 SoC family along with a
reference board
- Renesas adds new versions of their R-Car Gen3 SoCs and many updates
for their older generations
- Broadcom adds support for a number of Cisco Meraki wireless
controllers, along with two new boards and other updates for
BCM53xx/BCM47xx networking SoCs and the Raspberry Pi boards
- Mediatek improves support for the MT81xx SoCs used in Chromebooks
as well as the MT76xx networking SoCs
- NVIDIA adds a number of cleanups and additional support for more
hardware on the already supported machines
- TI K3 adds support for three new boards along with cleanups
- Toshiba adds one board for the Visconti family
- Xilinx adds five new ZynqMP based machines
- Amlogic support is added for the Radxa Zero and two Jethub home
automation controllers, along with changes to other machines
- Rob Herring continues his work on fixing dtc warnings all over the
tree.
- Minor updates for TI OMAP, Mstar, Allwinner/sunxi, Hisilicon,
Ux500, Unisoc"
* tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (720 commits)
arm64: dts: apple: j274: Expose PCI node for the Ethernet MAC address
arm64: dts: apple: t8103: Add root port interrupt routing
arm64: dts: apple: t8103: Add PCIe DARTs
arm64: apple: Add PCIe node
arm64: apple: Add pinctrl nodes
ARM: dts: arm: Update ICST clock nodes 'reg' and node names
ARM: dts: arm: Update register-bit-led nodes 'reg' and node names
arm64: dts: exynos: add chipid node for exynosautov9 SoC
ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node
Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors"
arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node
arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property
arm64: dts: qcom: sm8350: Add CPU topology and idle-states
arm64: dts: qcom: Drop unneeded extra device-specific includes
arm64: dts: qcom: msm8916: Drop standalone smem node
arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes
arm64: dts: qcom: msm8916-asus-z00l: Add sensors
arm64: dts: qcom: msm8916-asus-z00l: Add SDCard
arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen
arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node
...
706 files changed, 47875 insertions, 8098 deletions
@@ -279,6 +279,7 @@ Nicolas Pitre <nico@fluxnic.net> <nicolas.pitre@linaro.org> Nicolas Pitre <nico@fluxnic.net> <nico@linaro.org> Nicolas Saenz Julienne <nsaenz@kernel.org> <nsaenzjulienne@suse.de> Nicolas Saenz Julienne <nsaenz@kernel.org> <nsaenzjulienne@suse.com> +Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Oleksij Rempel <linux@rempel-privat.de> <bug-track@fisher-privat.net> Oleksij Rempel <linux@rempel-privat.de> <external.Oleksij.Rempel@de.bosch.com> Oleksij Rempel <linux@rempel-privat.de> <fixed-term.Oleksij.Rempel@de.bosch.com> diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml index 6423377710ee..36081734f720 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml @@ -86,6 +86,7 @@ properties: - enum: - amlogic,p281 - oranth,tx3-mini + - jethome,jethub-j80 - const: amlogic,s905w - const: amlogic,meson-gxl @@ -133,6 +134,7 @@ properties: items: - enum: - amlogic,s400 + - jethome,jethub-j100 - const: amlogic,a113d - const: amlogic,meson-axg @@ -141,6 +143,7 @@ properties: - enum: - amediatech,x96-max - amlogic,u200 + - radxa,zero - seirobotics,sei510 - const: amlogic,g12a diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.yaml b/Documentation/devicetree/bindings/arm/atmel-at91.yaml index aad351706117..c612e1f48dba 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.yaml +++ b/Documentation/devicetree/bindings/arm/atmel-at91.yaml @@ -126,6 +126,18 @@ properties: - const: atmel,sama5d3 - const: atmel,sama5 + - description: CalAmp LMU5000 board + items: + - const: calamp,lmu5000 + - const: atmel,at91sam9g20 + - const: atmel,at91sam9 + + - description: Exegin Q5xR5 board + items: + - const: exegin,q5xr5 + - const: atmel,at91sam9g20 + - const: atmel,at91sam9 + - items: - enum: - atmel,sama5d31 diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml index 230b80d9d6cf..5dc48241efb3 100644 --- a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml @@ -19,6 +19,7 @@ properties: items: - enum: - raspberrypi,400 + - raspberrypi,4-compute-module - raspberrypi,4-model-b - const: brcm,bcm2711 diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml index 476bc23a7f75..7d184ba7d180 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml @@ -22,16 +22,61 @@ properties: $nodename: const: '/' compatible: - items: - - enum: - - brcm,bcm58522 - - brcm,bcm58525 - - brcm,bcm58535 - - brcm,bcm58622 - - brcm,bcm58623 - - brcm,bcm58625 - - brcm,bcm88312 - - const: brcm,nsp + oneOf: + - description: BCM58522 based boards + items: + - enum: + - brcm,bcm958522er + - const: brcm,bcm58522 + - const: brcm,nsp + + - description: BCM58525 based boards + items: + - enum: + - brcm,bcm958525er + - brcm,bcm958525xmc + - const: brcm,bcm58525 + - const: brcm,nsp + + - description: BCM58535 based boards + items: + - const: brcm,bcm58535 + - const: brcm,nsp + + - description: BCM58622 based boards + items: + - enum: + - brcm,bcm958622hr + - const: brcm,bcm58622 + - const: brcm,nsp + + - description: BCM58623 based boards + items: + - enum: + - brcm,bcm958623hr + - const: brcm,bcm58623 + - const: brcm,nsp + + - description: BCM58625 based boards + items: + - enum: + - brcm,bcm958625hr + - brcm,bcm958625k + - meraki,mx64 + - meraki,mx64-a0 + - meraki,mx64w + - meraki,mx64w-a0 + - meraki,mx65 + - meraki,mx65w + - const: brcm,bcm58625 + - const: brcm,nsp + + - description: BCM88312 based boards + items: + - enum: + - brcm,bcm988312hr + - const: brcm,bcm88312 + - const: brcm,nsp additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 35b552ce8803..49bbaf1a3ea6 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -171,6 +171,8 @@ properties: - qcom,kryo385 - qcom,kryo468 - qcom,kryo485 + - qcom,kryo560 + - qcom,kryo570 - qcom,kryo685 - qcom,scorpion diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 60f4862ba15e..0b595b26061f 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -235,7 +235,7 @@ properties: - technexion,imx6q-pico-pi # TechNexion i.MX6Q Pico-Pi - technologic,imx6q-ts4900 - technologic,imx6q-ts7970 - - toradex,apalis_imx6q # Apalis iMX6 Module + - toradex,apalis_imx6q # Apalis iMX6 Modules - udoo,imx6q-udoo # Udoo i.MX6 Quad Board - uniwest,imx6q-evi # Uniwest Evi - variscite,dt6customboard @@ -314,18 +314,12 @@ properties: - const: phytec,imx6q-pfla02 # PHYTEC phyFLEX-i.MX6 Quad - const: fsl,imx6q - - description: i.MX6Q Boards with Toradex Apalis iMX6Q/D Module + - description: i.MX6Q Boards with Toradex Apalis iMX6Q/D Modules items: - enum: - - toradex,apalis_imx6q-ixora # Apalis iMX6Q/D Module on Ixora Carrier Board - - toradex,apalis_imx6q-eval # Apalis iMX6Q/D Module on Apalis Evaluation Board - - const: toradex,apalis_imx6q - - const: fsl,imx6q - - - description: i.MX6Q Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.1 - items: - - const: toradex,apalis_imx6q-ixora-v1.1 - - const: toradex,apalis_imx6q-ixora + - toradex,apalis_imx6q-ixora # Apalis iMX6Q/D Module on Ixora Carrier Board + - toradex,apalis_imx6q-ixora-v1.1 # Apalis iMX6Q/D Module on Ixora V1.1 Carrier Board + - toradex,apalis_imx6q-eval # Apalis iMX6Q/D Module on Apalis Evaluation Board - const: toradex,apalis_imx6q - const: fsl,imx6q @@ -393,6 +387,8 @@ properties: - technexion,imx6dl-pico-pi # TechNexion i.MX6DL Pico-Pi - technologic,imx6dl-ts4900 - technologic,imx6dl-ts7970 + - toradex,colibri_imx6dl # Colibri iMX6 Modules + - toradex,colibri_imx6dl-v1_1 # Colibri iMX6 V1.1 Modules - udoo,imx6dl-udoo # Udoo i.MX6 Dual-lite Board - vdl,lanmcu # Van der Laan LANMCU board - wand,imx6dl-wandboard # Wandboard i.MX6 Dual Lite Board @@ -466,20 +462,18 @@ properties: - const: phytec,imx6dl-pfla02 # PHYTEC phyFLEX-i.MX6 Quad - const: fsl,imx6dl - - description: i.MX6DL Toradex Colibri iMX6 Module on Colibri - Evaluation Board V3 + - description: i.MX6DL Boards with Toradex Colibri iMX6DL/S Modules items: - - const: toradex,colibri_imx6dl-eval-v3 - - const: toradex,colibri_imx6dl # Colibri iMX6 Module + - enum: + - toradex,colibri_imx6dl-eval-v3 # Colibri iMX6DL/S Module on Colibri Evaluation Board V3 + - const: toradex,colibri_imx6dl # Colibri iMX6DL/S Module - const: fsl,imx6dl - - description: i.MX6DL Toradex Colibri iMX6 Module V1.1 on Colibri - Evaluation Board V3 + - description: i.MX6DL Boards with Toradex Colibri iMX6DL/S V1.1 Modules items: - - const: toradex,colibri_imx6dl-v1_1-eval-v3 - - const: toradex,colibri_imx6dl-v1_1 # Colibri iMX6 Module V1.1 - - const: toradex,colibri_imx6dl-eval-v3 - - const: toradex,colibri_imx6dl # Colibri iMX6 Module + - enum: + - toradex,colibri_imx6dl-v1_1-eval-v3 # Colibri iMX6DL/S V1.1 M. on Colibri Evaluation Board V3 + - const: toradex,colibri_imx6dl-v1_1 # Colibri iMX6DL/S V1.1 Module - const: fsl,imx6dl - description: i.MX6S DHCOM DRC02 Board @@ -494,6 +488,7 @@ properties: - fsl,imx6sl-evk # i.MX6 SoloLite EVK Board - kobo,tolino-shine2hd - kobo,tolino-shine3 + - kobo,tolino-vision5 - revotics,imx6sl-warp # Revotics WaRP Board - const: fsl,imx6sl @@ -502,6 +497,7 @@ properties: - enum: - fsl,imx6sll-evk - kobo,clarahd + - kobo,librah2o - const: fsl,imx6sll - description: i.MX6SX based Boards @@ -586,8 +582,9 @@ properties: - fsl,imx6ull-14x14-evk # i.MX6 UltraLiteLite 14x14 EVK Board - kontron,imx6ull-n6411-som # Kontron N6411 SOM - myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board - - toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Eval Board - - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT Module on Colibri Eval Board + - toradex,colibri-imx6ull # Colibri iMX6ULL Modules + - toradex,colibri-imx6ull-emmc # Colibri iMX6ULL 1GB (eMMC) Module + - toradex,colibri-imx6ull-wifi # Colibri iMX6ULL Wi-Fi / BT Modules - const: fsl,imx6ull - description: i.MX6ULL Armadeus Systems OPOS6ULDev Board @@ -605,6 +602,27 @@ properties: - const: phytec,imx6ull-pcl063 # PHYTEC phyCORE-i.MX 6ULL - const: fsl,imx6ull + - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Modules + items: + - enum: + - toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Evaluation Board + - const: toradex,colibri-imx6ull # Colibri iMX6ULL Module + - const: fsl,imx6dl + + - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL 1GB (eMMC) Module + items: + - enum: + - toradex,colibri-imx6ull-emmc-eval # Colibri iMX6ULL 1GB (eMMC) M. on Colibri Evaluation Board + - const: toradex,colibri-imx6ull-emmc # Colibri iMX6ULL 1GB (eMMC) Module + - const: fsl,imx6dl + + - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Wi-Fi / BT Modules + items: + - enum: + - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT M. on Colibri Evaluation Board + - const: toradex,colibri-imx6ull-wifi # Colibri iMX6ULL Wi-Fi / BT Module + - const: fsl,imx6dl + - description: Kontron N6411 S Board items: - const: kontron,imx6ull-n6411-s @@ -622,6 +640,7 @@ properties: items: - enum: - element14,imx7s-warp # Element14 Warp i.MX7 Board + - toradex,colibri-imx7s # Colibri iMX7S Module - const: fsl,imx7s - description: i.MX7S Boards with Toradex Colibri iMX7S Module @@ -653,15 +672,8 @@ properties: - technexion,imx7d-pico-hobbit # TechNexion i.MX7D Pico-Hobbit - technexion,imx7d-pico-nymph # TechNexion i.MX7D Pico-Nymph - technexion,imx7d-pico-pi # TechNexion i.MX7D Pico-Pi - - toradex,colibri-imx7d # Colibri iMX7 Dual Module - - toradex,colibri-imx7d-aster # Colibri iMX7 Dual Module on Aster Carrier Board - - toradex,colibri-imx7d-emmc # Colibri iMX7 Dual 1GB (eMMC) Module - - toradex,colibri-imx7d-emmc-aster # Colibri iMX7 Dual 1GB (eMMC) Module on - # Aster Carrier Board - - toradex,colibri-imx7d-emmc-eval-v3 # Colibri iMX7 Dual 1GB (eMMC) Module on - # Colibri Evaluation Board V3 - - toradex,colibri-imx7d-eval-v3 # Colibri iMX7 Dual Module on - # Colibri Evaluation Board V3 + - toradex,colibri-imx7d # Colibri iMX7D Module + - toradex,colibri-imx7d-emmc # Colibri iMX7D 1GB (eMMC) Module - zii,imx7d-rmu2 # ZII RMU2 Board - zii,imx7d-rpu2 # ZII RPU2 Board - const: fsl,imx7d @@ -686,12 +698,12 @@ properties: - description: i.MX7D Boards with Toradex Colibri i.MX7D Module items: - enum: - - toradex,colibri-imx7d-aster # Module on Aster Carrier Board - - toradex,colibri-imx7d-eval-v3 # Module on Colibri Evaluation Board V3 + - toradex,colibri-imx7d-aster # Colibri iMX7D Module on Aster Carrier Board + - toradex,colibri-imx7d-eval-v3 # Colibri iMX7D Module on Colibri Evaluation Board V3 - const: toradex,colibri-imx7d - const: fsl,imx7d - - description: i.MX7D Boards with Toradex Colibri i.MX7D eMMC Module + - description: i.MX7D Boards with Toradex Colibri i.MX7D 1GB (eMMC) Module items: - enum: - toradex,colibri-imx7d-emmc-aster # Module on Aster Carrier Board @@ -812,10 +824,10 @@ properties: - enum: - einfochips,imx8qxp-ai_ml # i.MX8QXP AI_ML Board - fsl,imx8qxp-mek # i.MX8QXP MEK Board - - toradex,colibri-imx8x # Colibri iMX8X Module + - toradex,colibri-imx8x # Colibri iMX8X Modules - const: fsl,imx8qxp - - description: Toradex Colibri i.MX8 Evaluation Board + - description: i.MX8QXP Boards with Toradex Coilbri iMX8X Modules items: - enum: - toradex,colibri-imx8x-eval-v3 # Colibri iMX8X Module on Colibri Evaluation Board V3 @@ -847,9 +859,10 @@ properties: - description: VF610 based Boards items: - enum: + - fsl,vf610-twr # VF610 Tower Board - lwn,bk4 # Liebherr BK4 controller - phytec,vf610-cosmic # PHYTEC Cosmic/Cosmic+ Board - - fsl,vf610-twr # VF610 Tower Board + - toradex,vf610-colibri_vf61 # Colibri VF61 Modules - const: fsl,vf610 - description: Toradex Colibri VF61 Module on Colibri Evaluation Board @@ -886,6 +899,7 @@ properties: - enum: - fsl,ls1021a-moxa-uc-8410a - fsl,ls1021a-qds + - fsl,ls1021a-tsn - fsl,ls1021a-twr - const: fsl,ls1021a @@ -977,6 +991,8 @@ properties: - description: LX2160A based Boards items: - enum: + - fsl,lx2160a-bluebox3 + - fsl,lx2160a-bluebox3-rev-a - fsl,lx2160a-qds - fsl,lx2160a-rdb - fsl,lx2162a-qds @@ -990,6 +1006,13 @@ properties: - const: solidrun,lx2160a-cex7 - const: fsl,lx2160a + - description: S32G2 based Boards + items: + - enum: + - nxp,s32g274a-evb + - nxp,s32g274a-rdb2 + - const: nxp,s32g2 + - description: S32V234 based Boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index 80a05f6fee85..0fa55497b96f 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -32,6 +32,7 @@ properties: - const: mediatek,mt6580 - items: - enum: + - fairphone,fp1 - mundoreader,bq-aquaris5 - const: mediatek,mt6589 - items: diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml index f9ffa5b703a5..763c62323a74 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml @@ -43,6 +43,9 @@ properties: "#clock-cells": const: 1 + '#reset-cells': + const: 1 + required: - compatible - reg @@ -56,4 +59,5 @@ examples: compatible = "mediatek,mt8173-mmsys", "syscon"; reg = <0x14000000 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 880ddafc634e..c8808e0f9e64 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -25,6 +25,7 @@ description: | The 'SoC' element must be one of the following strings: apq8016 + apq8026 apq8074 apq8084 apq8096 @@ -44,6 +45,8 @@ description: | sdm660 sdm845 sdx55 + sdx65 + sm7225 sm8150 sm8250 sm8350 @@ -94,6 +97,14 @@ properties: - items: - enum: + - lg,lenok + - const: qcom,apq8026 + + - items: + - enum: + - asus,nexus7-flo + - lg,nexus4-mako + - sony,xperia-yuga - qcom,apq8064-cm-qs600 - qcom,apq8064-ifc6410 - const: qcom,apq8064 @@ -129,6 +140,7 @@ properties: - enum: - fairphone,fp2 - lge,hammerhead + - samsung,klte - sony,xperia-amami - sony,xperia-castor - sony,xperia-honami @@ -163,6 +175,7 @@ properties: - items: - enum: + - qcom,ipq4019-ap-dk01.1-c1 - qcom,ipq4019-ap-dk04.1-c3 - qcom,ipq4019-ap-dk07.1-c1 - qcom,ipq4019-ap-dk07.1-c2 @@ -208,6 +221,11 @@ properties: - items: - enum: + - qcom,sdx65-mtp + - const: qcom,sdx65 + + - items: + - enum: - qcom,ipq6018-cp01 - qcom,ipq6018-cp01-c1 - const: qcom,ipq6018 @@ -219,6 +237,11 @@ properties: - items: - enum: + - fairphone,fp4 + - const: qcom,sm7225 + + - items: + - enum: - qcom,sm8150-mtp - const: qcom,sm8150 diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml index 8a11918866b8..517206507801 100644 --- a/Documentation/devicetree/bindings/arm/renesas.yaml +++ b/Documentation/devicetree/bindings/arm/renesas.yaml @@ -255,12 +255,19 @@ properties: - enum: - renesas,h3ulcb - renesas,m3ulcb + - renesas,m3nulcb - enum: + - renesas,r8a779m0 - renesas,r8a779m1 + - renesas,r8a779m2 - renesas,r8a779m3 + - renesas,r8a779m4 + - renesas,r8a779m5 + - renesas,r8a779m8 - enum: - renesas,r8a7795 - renesas,r8a77961 + - renesas,r8a77965 - description: R-Car M3-N (R8A77965) items: @@ -308,6 +315,14 @@ properties: - const: renesas,falcon-cpu - const: renesas,r8a779a0 + - description: R-Car H3e (R8A779M0) + items: + - enum: + - renesas,h3ulcb # H3ULCB (R-Car Starter Kit Premier) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version) + - const: renesas,r8a779m0 + - const: renesas,r8a7795 + - description: R-Car H3e-2G (R8A779M1) items: - enum: @@ -316,6 +331,14 @@ properties: - const: renesas,r8a779m1 - const: renesas,r8a7795 + - description: R-Car M3e (R8A779M2) + items: + - enum: + - renesas,m3ulcb # M3ULCB (R-Car Starter Kit Pro) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version) + - const: renesas,r8a779m2 + - const: renesas,r8a77961 + - description: R-Car M3e-2G (R8A779M3) items: - enum: @@ -324,6 +347,44 @@ properties: - const: renesas,r8a779m3 - const: renesas,r8a77961 + - description: R-Car M3Ne (R8A779M4) + items: + - enum: + - renesas,m3nulcb # M3NULCB (R-Car Starter Kit Pro) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version) + - const: renesas,r8a779m4 + - const: renesas,r8a77965 + + - description: R-Car M3Ne-2G (R8A779M5) + items: + - enum: + - renesas,m3nulcb # M3NULCB (R-Car Starter Kit Pro) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version) + - const: renesas,r8a779m5 + - const: renesas,r8a77965 + + - description: R-Car E3e (R8A779M6) + items: + - enum: + - renesas,ebisu # Ebisu + - const: renesas,r8a779m6 + - const: renesas,r8a77990 + + - description: R-Car D3e (R8A779M7) + items: + - enum: + - renesas,draak # Draak + - const: renesas,r8a779m7 + - const: renesas,r8a77995 + + - description: R-Car H3Ne (R8A779M8) + items: + - enum: + - renesas,h3ulcb # H3ULCB (R-Car Starter Kit Premier) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version) + - const: renesas,r8a779m8 + - const: renesas,r8a7795 + - description: RZ/N1D (R9A06G032) items: - enum: diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 6546b015fc62..4aed16176434 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -115,6 +115,11 @@ properties: - const: firefly,roc-rk3328-cc - const: rockchip,rk3328 + - description: Firefly ROC-RK3328-PC + items: + - const: firefly,roc-rk3328-pc + - const: rockchip,rk3328 + - description: Firefly ROC-RK3399-PC items: - enum: @@ -122,6 +127,12 @@ properties: - firefly,roc-rk3399-pc-mezzanine - const: rockchip,rk3399 + - description: Firefly ROC-RK3399-PC-PLUS + items: + - enum: + - firefly,roc-rk3399-pc-plus + - const: rockchip,rk3399 + - description: FriendlyElec NanoPi R2S items: - const: friendlyarm,nanopi-r2s @@ -287,6 +298,34 @@ properties: - const: google,veyron - const: rockchip,rk3288 + - description: Google Scarlet - Dumo (ASUS Chromebook Tablet CT100) + items: + - const: google,scarlet-rev15-sku0 + - const: google,scarlet-rev15 + - const: google,scarlet-rev14-sku0 + - const: google,scarlet-rev14 + - const: google,scarlet-rev13-sku0 + - const: google,scarlet-rev13 + - const: google,scarlet-rev12-sku0 + - const: google,scarlet-rev12 + - const: google,scarlet-rev11-sku0 + - const: google,scarlet-rev11 + - const: google,scarlet-rev10-sku0 + - const: google,scarlet-rev10 + - const: google,scarlet-rev9-sku0 + - const: google,scarlet-rev9 + - const: google,scarlet-rev8-sku0 + - const: google,scarlet-rev8 + - const: google,scarlet-rev7-sku0 + - const: google,scarlet-rev7 + - const: google,scarlet-rev6-sku0 + - const: google,scarlet-rev6 + - const: google,scarlet-rev5-sku0 + - const: google,scarlet-rev5 + - const: google,scarlet + - const: google,gru + - const: rockchip,rk3399 + - description: Google Scarlet - Kingdisplay (Acer Chromebook Tab 10) items: - const: google,scarlet-rev15-sku7 @@ -455,16 +494,23 @@ properties: - const: pine64,rockpro64 - const: rockchip,rk3399 + - description: Pine64 Quartz64 Model A + items: + - const: pine64,quartz64-a + - const: rockchip,rk3566 + - description: Radxa Rock items: - const: radxa,rock - const: rockchip,rk3188 - - description: Radxa ROCK Pi 4A/B/C + - description: Radxa ROCK Pi 4A/A+/B/B+/C items: - enum: - radxa,rockpi4a + - radxa,rockpi4a-plus - radxa,rockpi4b + - radxa,rockpi4b-plus - radxa,rockpi4c - const: radxa,rockpi4 - const: rockchip,rk3399 diff --git a/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml b/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml index 53115b92d17f..5ece38065e54 100644 --- a/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml @@ -22,7 +22,9 @@ select: - rockchip,px30-pmu - rockchip,rk3066-pmu - rockchip,rk3288-pmu + - rockchip,rk3368-pmu - rockchip,rk3399-pmu + - rockchip,rk3568-pmu required: - compatible @@ -34,7 +36,9 @@ properties: - rockchip,px30-pmu - rockchip,rk3066-pmu - rockchip,rk3288-pmu + - rockchip,rk3368-pmu - rockchip,rk3399-pmu + - rockchip,rk3568-pmu - const: syscon - const: simple-mfd diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml index 0796f0c87727..ef6dc14be4b5 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml @@ -199,6 +199,12 @@ properties: - samsung,exynos7-espresso # Samsung Exynos7 Espresso - const: samsung,exynos7 + - description: Exynos Auto v9 based boards + items: + - enum: + - samsung,exynosautov9-sadk # Samsung Exynos Auto v9 SADK + - const: samsung,exynosautov9 + required: - compatible diff --git a/Documentation/devicetree/bindings/arm/sprd/sprd.yaml b/Documentation/devicetree/bindings/arm/sprd/sprd.yaml index 7b6ae3070396..2c12e571394b 100644 --- a/Documentation/devicetree/bindings/arm/sprd/sprd.yaml +++ b/Documentation/devicetree/bindings/arm/sprd/sprd.yaml @@ -30,6 +30,11 @@ properties: - sprd,sp9863a-1h10 - const: sprd,sc9863a + - items: + - enum: + - sprd,ums512-1h10 + - const: sprd,ums512 + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index 9a77ab74be99..9ac7da01c6c3 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -57,6 +57,10 @@ properties: - const: st,stm32h750 - items: - enum: + - st,stm32mp135f-dk + - const: st,stm32mp135 + - items: + - enum: - shiratech,stm32mp157a-iot-box # IoT Box - shiratech,stm32mp157a-stinger96 # Stinger96 - st,stm32mp157c-ed1 diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml index e713a6fe4cf7..29c9961ee2d8 100644 --- a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml @@ -30,6 +30,7 @@ properties: enum: - allwinner,sun5i-a13-mbus - allwinner,sun8i-h3-mbus + - allwinner,sun8i-r40-mbus - allwinner,sun50i-a64-mbus reg: diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml new file mode 100644 index 000000000000..f3878e0b3cc4 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner CPU Configuration Controller Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + compatible: + enum: + - allwinner,sun6i-a31-cpuconfig + - allwinner,sun8i-a23-cpuconfig + - allwinner,sun8i-a83t-cpucfg + - allwinner,sun8i-a83t-r-cpucfg + - allwinner,sun9i-a80-cpucfg + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + cpucfg@1f01c00 { + compatible = "allwinner,sun6i-a31-cpuconfig"; + reg = <0x01f01c00 0x300>; + }; + +... diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml new file mode 100644 index 000000000000..668aadbfe4c0 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/sunxi/allwinner,sun9i-a80-prcm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A80 PRCM Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + compatible: + const: allwinner,sun9i-a80-prcm + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + prcm@8001400 { + compatible = "allwinner,sun9i-a80-prcm"; + reg = <0x08001400 0x200>; + }; + +... diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml index c5aa362e4026..cf327230fc0e 100644 --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml @@ -24,16 +24,27 @@ properties: - enum: - ti,am654-evm - siemens,iot2050-basic + - siemens,iot2050-basic-pg2 - siemens,iot2050-advanced + - siemens,iot2050-advanced-pg2 - const: ti,am654 - description: K3 J721E SoC - items: + oneOf: - const: ti,j721e + - items: + - enum: + - ti,j721e-evm + - ti,j721e-sk + - const: ti,j721e - description: K3 J7200 SoC - items: + oneOf: - const: ti,j7200 + - items: + - enum: + - ti,j7200-evm + - const: ti,j7200 - description: K3 AM642 SoC items: diff --git a/Documentation/devicetree/bindings/arm/toshiba.yaml b/Documentation/devicetree/bindings/arm/toshiba.yaml index 001bbbcd1432..9c1cacbdc916 100644 --- a/Documentation/devicetree/bindings/arm/toshiba.yaml +++ b/Documentation/devicetree/bindings/arm/toshiba.yaml @@ -18,6 +18,7 @@ properties: items: - enum: - toshiba,tmpv7708-rm-mbrc # TMPV7708 RM main board + - toshiba,tmpv7708-visrobo-vrb # TMPV7708 VisROBO VRB board - const: toshiba,tmpv7708 additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/xilinx.yaml b/Documentation/devicetree/bindings/arm/xilinx.yaml index f52c7e8ce654..4dc0e0195974 100644 --- a/Documentation/devicetree/bindings/arm/xilinx.yaml +++ b/Documentation/devicetree/bindings/arm/xilinx.yaml @@ -87,6 +87,7 @@ properties: - xlnx,zynqmp-zcu102-revA - xlnx,zynqmp-zcu102-revB - xlnx,zynqmp-zcu102-rev1.0 + - xlnx,zynqmp-zcu102-rev1.1 - const: xlnx,zynqmp-zcu102 - const: xlnx,zynqmp @@ -115,6 +116,22 @@ properties: - const: xlnx,zynqmp-zcu111 - const: xlnx,zynqmp + - description: Xilinx Kria SOMs + items: + - const: xlnx,zynqmp-sm-k26-rev1 + - const: xlnx,zynqmp-sm-k26-revB + - const: xlnx,zynqmp-sm-k26-revA + - const: xlnx,zynqmp-sm-k26 + - const: xlnx,zynqmp + + - description: Xilinx Kria SOMs (starter) + items: + - const: xlnx,zynqmp-smk-k26-rev1 + - const: xlnx,zynqmp-smk-k26-revB + - const: xlnx,zynqmp-smk-k26-revA + - const: xlnx,zynqmp-smk-k26 + - const: xlnx,zynqmp + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml index 32608578a352..c8b2459d64f6 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml @@ -47,6 +47,9 @@ properties: interrupts: maxItems: 1 + power-domains: + maxItems: 1 + required: - "#clock-cells" - compatible diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml index 031e35e76db2..48c8cad0d96d 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml @@ -51,6 +51,9 @@ properties: dma-names: const: audio-rx + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml index 8a73780f573d..c55a8217de25 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml @@ -24,6 +24,9 @@ properties: interrupts: maxItems: 1 + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml index 9b24081a0dbd..5d921e30394e 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml @@ -24,6 +24,9 @@ properties: interrupts: maxItems: 1 + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt index d30428b9fb33..36b01458f45c 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt @@ -19,6 +19,11 @@ Required properties: Documentation/devicetree/bindings/graph.txt. This port should be connected to the input port of an attached DSI panel or DSI-to-eDP encoder chip. +Optional properties: +- resets: list of phandle + reset specifier pair, as described in [1]. + +[1] Documentation/devicetree/bindings/reset/reset.txt + MIPI TX Configuration Module ============================ @@ -45,6 +50,7 @@ dsi0: dsi@1401b000 { clocks = <&mmsys MM_DSI0_ENGINE>, <&mmsys MM_DSI0_DIGITAL>, <&mipi_tx0>; clock-names = "engine", "digital", "hs"; + resets = <&mmsys MT8173_MMSYS_SW0_RST_B_DISP_DSI0>; phys = <&mipi_tx0>; phy-names = "dphy"; diff --git a/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml new file mode 100644 index 000000000000..3cf862976448 --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/gpu/host1x/nvidia,tegra210-nvdec.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Device tree binding for NVIDIA Tegra NVDEC + +description: | + NVDEC is the hardware video decoder present on NVIDIA Tegra210 + and newer chips. It is located on the Host1x bus and typically + programmed through Host1x channels. + +maintainers: + - Thierry Reding <treding@gmail.com> + - Mikko Perttunen <mperttunen@nvidia.com> + +properties: + $nodename: + pattern: "^nvdec@[0-9a-f]*$" + + compatible: + enum: + - nvidia,tegra210-nvdec + - nvidia,tegra186-nvdec + - nvidia,tegra194-nvdec + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: nvdec + + resets: + maxItems: 1 + + reset-names: + items: + - const: nvdec + + power-domains: + maxItems: 1 + + iommus: + maxItems: 1 + + dma-coherent: true + + interconnects: + items: + - description: DMA read memory client + - description: DMA read 2 memory client + - description: DMA write memory client + + interconnect-names: + items: + - const: dma-mem + - const: read-1 + - const: write + + nvidia,host1x-class: + description: | + Host1x class of the engine, used to specify the targeted engine + when programming the engine through Host1x channels or when + configuring engine-specific behavior in Host1x. + default: 0xf0 + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra186-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/memory/tegra186-mc.h> + #include <dt-bindings/power/tegra186-powergate.h> + #include <dt-bindings/reset/tegra186-reset.h> + + nvdec@15480000 { + compatible = "nvidia,tegra186-nvdec"; + reg = <0x15480000 0x40000>; + clocks = <&bpmp TEGRA186_CLK_NVDEC>; + clock-names = "nvdec"; + resets = <&bpmp TEGRA186_RESET_NVDEC>; + reset-names = "nvdec"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_NVDEC>; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDECSRD &emc>, + <&mc TEGRA186_MEMORY_CLIENT_NVDECSRD1 &emc>, + <&mc TEGRA186_MEMORY_CLIENT_NVDECSWR &emc>; + interconnect-names = "dma-mem", "read-1", "write"; + iommus = <&smmu TEGRA186_SID_NVDEC>; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt b/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt deleted file mode 100644 index c1359f4d48d7..000000000000 --- a/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt +++ /dev/null @@ -1,157 +0,0 @@ -Device tree bindings for OMAP general purpose memory controllers (GPMC) - -The actual devices are instantiated from the child nodes of a GPMC node. - -Required properties: - - - compatible: Should be set to one of the following: - - ti,omap2420-gpmc (omap2420) - ti,omap2430-gpmc (omap2430) - ti,omap3430-gpmc (omap3430 & omap3630) - ti,omap4430-gpmc (omap4430 & omap4460 & omap543x) - ti,am3352-gpmc (am335x devices) - - - reg: A resource specifier for the register space - (see the example below) - - ti,hwmods: Should be set to "ti,gpmc" until the DT transition is - completed. - - #address-cells: Must be set to 2 to allow memory address translation - - #size-cells: Must be set to 1 to allow CS address passing - - gpmc,num-cs: The maximum number of chip-select lines that controller - can support. - - gpmc,num-waitpins: The maximum number of wait pins that controller can - support. - - ranges: Must be set up to reflect the memory layout with four - integer values for each chip-select line in use: - - <cs-number> 0 <physical address of mapping> <size> - - Currently, calculated values derived from the contents - of the per-CS register GPMC_CONFIG7 (as set up by the - bootloader) are used for the physical address decoding. - As this will change in the future, filling correct - values here is a requirement. - - interrupt-controller: The GPMC driver implements and interrupt controller for - the NAND events "fifoevent" and "termcount" plus the - rising/falling edges on the GPMC_WAIT pins. - The interrupt number mapping is as follows - 0 - NAND_fifoevent - 1 - NAND_termcount - 2 - GPMC_WAIT0 pin edge - 3 - GPMC_WAIT1 pin edge, and so on. - - interrupt-cells: Must be set to 2 - - gpio-controller: The GPMC driver implements a GPIO controller for the - GPMC WAIT pins that can be used as general purpose inputs. - 0 maps to GPMC_WAIT0 pin. - - gpio-cells: Must be set to 2 - -Required properties when using NAND prefetch dma: - - dmas GPMC NAND prefetch dma channel - - dma-names Must be set to "rxtx" - -Timing properties for child nodes. All are optional and default to 0. - - - gpmc,sync-clk-ps: Minimum clock period for synchronous mode, in picoseconds - - Chip-select signal timings (in nanoseconds) corresponding to GPMC_CONFIG2: - - gpmc,cs-on-ns: Assertion time - - gpmc,cs-rd-off-ns: Read deassertion time - - gpmc,cs-wr-off-ns: Write deassertion time - - ADV signal timings (in nanoseconds) corresponding to GPMC_CONFIG3: - - gpmc,adv-on-ns: Assertion time - - gpmc,adv-rd-off-ns: Read deassertion time - - gpmc,adv-wr-off-ns: Write deassertion time - - gpmc,adv-aad-mux-on-ns: Assertion time for AAD - - gpmc,adv-aad-mux-rd-off-ns: Read deassertion time for AAD - - gpmc,adv-aad-mux-wr-off-ns: Write deassertion time for AAD - - WE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4: - - gpmc,we-on-ns Assertion time - - gpmc,we-off-ns: Deassertion time - - OE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4: - - gpmc,oe-on-ns: Assertion time - - gpmc,oe-off-ns: Deassertion time - - gpmc,oe-aad-mux-on-ns: Assertion time for AAD - - gpmc,oe-aad-mux-off-ns: Deassertion time for AAD - - Access time and cycle time timings (in nanoseconds) corresponding to - GPMC_CONFIG5: - - gpmc,page-burst-access-ns: Multiple access word delay - - gpmc,access-ns: Start-cycle to first data valid delay - - gpmc,rd-cycle-ns: Total read cycle time - - gpmc,wr-cycle-ns: Total write cycle time - - gpmc,bus-turnaround-ns: Turn-around time between successive accesses - - gpmc,cycle2cycle-delay-ns: Delay between chip-select pulses - - gpmc,clk-activation-ns: GPMC clock activation time - - gpmc,wait-monitoring-ns: Start of wait monitoring with regard to valid - data - -Boolean timing parameters. If property is present parameter enabled and -disabled if omitted: - - gpmc,adv-extra-delay: ADV signal is delayed by half GPMC clock - - gpmc,cs-extra-delay: CS signal is delayed by half GPMC clock - - gpmc,cycle2cycle-diffcsen: Add "cycle2cycle-delay" between successive - accesses to a different CS - - gpmc,cycle2cycle-samecsen: Add "cycle2cycle-delay" between successive - accesses to the same CS - - gpmc,oe-extra-delay: OE signal is delayed by half GPMC clock - - gpmc,we-extra-delay: WE signal is delayed by half GPMC clock - - gpmc,time-para-granularity: Multiply all access times by 2 - -The following are only applicable to OMAP3+ and AM335x: - - gpmc,wr-access-ns: In synchronous write mode, for single or - burst accesses, defines the number of - GPMC_FCLK cycles from start access time - to the GPMC_CLK rising edge used by the - memory device for the first data capture. - - gpmc,wr-data-mux-bus-ns: In address-data multiplex mode, specifies - the time when the first data is driven on - the address-data bus. - -GPMC chip-select settings properties for child nodes. All are optional. - -- gpmc,burst-length Page/burst length. Must be 4, 8 or 16. -- gpmc,burst-wrap Enables wrap bursting -- gpmc,burst-read Enables read page/burst mode -- gpmc,burst-write Enables write page/burst mode -- gpmc,device-width Total width of device(s) connected to a GPMC - chip-select in bytes. The GPMC supports 8-bit - and 16-bit devices and so this property must be - 1 or 2. -- gpmc,mux-add-data Address and data multiplexing configuration. - Valid values are 1 for address-address-data - multiplexing mode and 2 for address-data - multiplexing mode. -- gpmc,sync-read Enables synchronous read. Defaults to asynchronous - is this is not set. -- gpmc,sync-write Enables synchronous writes. Defaults to asynchronous - is this is not set. -- gpmc,wait-pin Wait-pin used by client. Must be less than - "gpmc,num-waitpins". -- gpmc,wait-on-read Enables wait monitoring on reads. -- gpmc,wait-on-write Enables wait monitoring on writes. - -Example for an AM33xx board: - - gpmc: gpmc@50000000 { - compatible = "ti,am3352-gpmc"; - ti,hwmods = "gpmc"; - reg = <0x50000000 0x2000>; - interrupts = <100>; - dmas = <&edma 52 0>; - dma-names = "rxtx"; - gpmc,num-cs = <8>; - gpmc,num-waitpins = <2>; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0x08000000 0x10000000>; /* CS0 @addr 0x8000000, size 0x10000000 */ - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - - /* child nodes go here */ - }; diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml new file mode 100644 index 000000000000..6e3995bb1630 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml @@ -0,0 +1,245 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/ti,gpmc-child.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: device tree bindings for children of the Texas Instruments GPMC + +maintainers: + - Tony Lindgren <tony@atomide.com> + - Roger Quadros <rogerq@kernel.org> + +description: + This binding is meant for the child nodes of the GPMC node. The node + represents any device connected to the GPMC bus. It may be a Flash chip, + RAM chip or Ethernet controller, etc. These properties are meant for + configuring the GPMC settings/timings and will accompany the bindings + supported by the respective device. + +properties: + reg: true + +# GPMC Timing properties for child nodes. All are optional and default to 0. + gpmc,sync-clk-ps: + description: Minimum clock period for synchronous mode + default: 0 + +# Chip-select signal timings corresponding to GPMC_CONFIG2: + gpmc,cs-on-ns: + description: Assertion time + default: 0 + + gpmc,cs-rd-off-ns: + description: Read deassertion time + default: 0 + + gpmc,cs-wr-off-ns: + description: Write deassertion time + default: 0 + +# ADV signal timings corresponding to GPMC_CONFIG3: + gpmc,adv-on-ns: + description: Assertion time + default: 0 + + gpmc,adv-rd-off-ns: + description: Read deassertion time + default: 0 + + gpmc,adv-wr-off-ns: + description: Write deassertion time + default: 0 + + gpmc,adv-aad-mux-on-ns: + description: Assertion time for AAD + default: 0 + + gpmc,adv-aad-mux-rd-off-ns: + description: Read deassertion time for AAD + default: 0 + + gpmc,adv-aad-mux-wr-off-ns: + description: Write deassertion time for AAD + default: 0 + +# WE signals timings corresponding to GPMC_CONFIG4: + gpmc,we-on-ns: + description: Assertion time + default: 0 + + gpmc,we-off-ns: + description: Deassertion time + default: 0 + +# OE signals timings corresponding to GPMC_CONFIG4: + gpmc,oe-on-ns: + description: Assertion time + default: 0 + + gpmc,oe-off-ns: + description: Deassertion time + default: 0 + + gpmc,oe-aad-mux-on-ns: + description: Assertion time for AAD + default: 0 + + gpmc,oe-aad-mux-off-ns: + description: Deassertion time for AAD + default: 0 + +# Access time and cycle time timings (in nanoseconds) corresponding to +# GPMC_CONFIG5: + gpmc,page-burst-access-ns: + description: Multiple access word delay + default: 0 + + gpmc,access-ns: + description: Start-cycle to first data valid delay + default: 0 + + gpmc,rd-cycle-ns: + description: Total read cycle time + default: 0 + + gpmc,wr-cycle-ns: + description: Total write cycle time + default: 0 + + gpmc,bus-turnaround-ns: + description: Turn-around time between successive accesses + default: 0 + + gpmc,cycle2cycle-delay-ns: + description: Delay between chip-select pulses + default: 0 + + gpmc,clk-activation-ns: + description: GPMC clock activation time + default: 0 + + gpmc,wait-monitoring-ns: + description: Start of wait monitoring with regard to valid data + default: 0 + +# Boolean timing parameters. If property is present, parameter is enabled +# otherwise disabled. + gpmc,adv-extra-delay: + description: ADV signal is delayed by half GPMC clock + type: boolean + + gpmc,cs-extra-delay: + description: CS signal is delayed by half GPMC clock + type: boolean + + gpmc,cycle2cycle-diffcsen: + description: | + Add "cycle2cycle-delay" between successive accesses + to a different CS + type: boolean + + gpmc,cycle2cycle-samecsen: + description: | + Add "cycle2cycle-delay" between successive accesses + to the same CS + type: boolean + + gpmc,oe-extra-delay: + description: OE signal is delayed by half GPMC clock + type: boolean + + gpmc,we-extra-delay: + description: WE signal is delayed by half GPMC clock + type: boolean + + gpmc,time-para-granularity: + description: Multiply all access times by 2 + type: boolean + +# The following two properties are applicable only to OMAP3+ and AM335x: + gpmc,wr-access-ns: + description: | + In synchronous write mode, for single or + burst accesses, defines the number of + GPMC_FCLK cycles from start access time + to the GPMC_CLK rising edge used by the + memory device for the first data capture. + default: 0 + + gpmc,wr-data-mux-bus-ns: + description: | + In address-data multiplex mode, specifies + the time when the first data is driven on + the address-data bus. + default: 0 + +# GPMC chip-select settings properties for child nodes. All are optional. + gpmc,burst-length: + description: Page/burst length. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 4, 8, 16] + default: 0 + + gpmc,burst-wrap: + description: Enables wrap bursting + type: boolean + + gpmc,burst-read: + description: Enables read page/burst mode + type: boolean + + gpmc,burst-write: + description: Enables write page/burst mode + type: boolean + + gpmc,device-width: + description: | + Total width of device(s) connected to a GPMC + chip-select in bytes. The GPMC supports 8-bit + and 16-bit devices and so this property must be + 1 or 2. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2] + default: 1 + + gpmc,mux-add-data: + description: | + Address and data multiplexing configuration. + Valid values are + 0 for Non multiplexed mode + 1 for address-address-data multiplexing mode and + 2 for address-data multiplexing mode. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + + gpmc,sync-read: + description: | + Enables synchronous read. Defaults to asynchronous + is this is not set. + type: boolean + + gpmc,sync-write: + description: | + Enables synchronous writes. Defaults to asynchronous + is this is not set. + type: boolean + + gpmc,wait-pin: + description: | + Wait-pin used by client. Must be less than "gpmc,num-waitpins". + $ref: /schemas/types.yaml#/definitions/uint32 + + gpmc,wait-on-read: + description: Enables wait monitoring on reads. + type: boolean + + gpmc,wait-on-write: + description: Enables wait monitoring on writes. + type: boolean + +required: + - reg + +# the GPMC child will have its own native properties +additionalProperties: true diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml new file mode 100644 index 000000000000..25b42d68f9b3 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml @@ -0,0 +1,172 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/ti,gpmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments GPMC Memory Controller device-tree bindings + +maintainers: + - Tony Lindgren <tony@atomide.com> + - Roger Quadros <rogerq@kernel.org> + +description: + The GPMC is a unified memory controller dedicated for interfacing + with external memory devices like + - Asynchronous SRAM-like memories and ASICs + - Asynchronous, synchronous, and page mode burst NOR flash + - NAND flash + - Pseudo-SRAM devices + +properties: + compatible: + items: + - enum: + - ti,am3352-gpmc + - ti,omap2420-gpmc + - ti,omap2430-gpmc + - ti,omap3430-gpmc + - ti,omap4430-gpmc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + description: | + Functional clock. Used for bus timing calculations and + GPMC configuration. + + clock-names: + items: + - const: fck + + dmas: + items: + - description: DMA channel for GPMC NAND prefetch + + dma-names: + items: + - const: rxtx + + "#address-cells": true + + "#size-cells": true + + gpmc,num-cs: + description: maximum number of supported chip-select lines. + $ref: /schemas/types.yaml#/definitions/uint32 + + gpmc,num-waitpins: + description: maximum number of supported wait pins. + $ref: /schemas/types.yaml#/definitions/uint32 + + ranges: + minItems: 1 + description: | + Must be set up to reflect the memory layout with four + integer values for each chip-select line in use, + <cs-number> 0 <physical address of mapping> <size> + items: + - description: NAND bank 0 + - description: NOR/SRAM bank 0 + - description: NOR/SRAM bank 1 + + '#interrupt-cells': + const: 2 + + interrupt-controller: + description: | + The GPMC driver implements and interrupt controller for + the NAND events "fifoevent" and "termcount" plus the + rising/falling edges on the GPMC_WAIT pins. + The interrupt number mapping is as follows + 0 - NAND_fifoevent + 1 - NAND_termcount + 2 - GPMC_WAIT0 pin edge + 3 - GPMC_WAIT1 pin edge, and so on. + + '#gpio-cells': + const: 2 + + gpio-controller: + description: | + The GPMC driver implements a GPIO controller for the + GPMC WAIT pins that can be used as general purpose inputs. + 0 maps to GPMC_WAIT0 pin. + + ti,hwmods: + description: + Name of the HWMOD associated with GPMC. This is for legacy + omap2/3 platforms only. + $ref: /schemas/types.yaml#/definitions/string + deprecated: true + + ti,no-idle-on-init: + description: + Prevent idling the module at init. This is for legacy omap2/3 + platforms only. + type: boolean + deprecated: true + +patternProperties: + "@[0-7],[a-f0-9]+$": + type: object + description: | + The child device node represents the device connected to the GPMC + bus. The device can be a NAND chip, SRAM device, NOR device + or an ASIC. + + allOf: + - $ref: "ti,gpmc-child.yaml" + + unevaluatedProperties: false + +required: + - compatible + - reg + - gpmc,num-cs + - gpmc,num-waitpins + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/gpio/gpio.h> + + gpmc: memory-controller@50000000 { + compatible = "ti,am3352-gpmc"; + reg = <0x50000000 0x2000>; + interrupts = <100>; + clocks = <&l3s_clkctrl>; + clock-names = "fck"; + dmas = <&edma 52 0>; + dma-names = "rxtx"; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <2>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x08000000 0x10000000>; /* CS0 @addr 0x8000000, size 0x10000000 */ + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + + nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + ti,nand-xfer-type = "prefetch-dma"; + ti,nand-ecc-opt = "bch16"; + ti,elm-id = <&elm>; + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */ + }; + }; diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt deleted file mode 100644 index c459f169a904..000000000000 --- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt +++ /dev/null @@ -1,147 +0,0 @@ -Device tree bindings for GPMC connected NANDs - -GPMC connected NAND (found on OMAP boards) are represented as child nodes of -the GPMC controller with a name of "nand". - -All timing relevant properties as well as generic gpmc child properties are -explained in a separate documents - please refer to -Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt - -For NAND specific properties such as ECC modes or bus width, please refer to -Documentation/devicetree/bindings/mtd/nand-controller.yaml - - -Required properties: - - - compatible: "ti,omap2-nand" - - reg: range id (CS number), base offset and length of the - NAND I/O space - - interrupts: Two interrupt specifiers, one for fifoevent, one for termcount. - -Optional properties: - - - nand-bus-width: Set this numeric value to 16 if the hardware - is wired that way. If not specified, a bus - width of 8 is assumed. - - - ti,nand-ecc-opt: A string setting the ECC layout to use. One of: - "sw" 1-bit Hamming ecc code via software - "hw" <deprecated> use "ham1" instead - "hw-romcode" <deprecated> use "ham1" instead - "ham1" 1-bit Hamming ecc code - "bch4" 4-bit BCH ecc code - "bch8" 8-bit BCH ecc code - "bch16" 16-bit BCH ECC code - Refer below "How to select correct ECC scheme for your device ?" - - - ti,nand-xfer-type: A string setting the data transfer type. One of: - - "prefetch-polled" Prefetch polled mode (default) - "polled" Polled mode, without prefetch - "prefetch-dma" Prefetch enabled DMA mode - "prefetch-irq" Prefetch enabled irq mode - - - elm_id: <deprecated> use "ti,elm-id" instead - - ti,elm-id: Specifies phandle of the ELM devicetree node. - ELM is an on-chip hardware engine on TI SoC which is used for - locating ECC errors for BCHx algorithms. SoC devices which have - ELM hardware engines should specify this device node in .dtsi - Using ELM for ECC error correction frees some CPU cycles. - - rb-gpios: GPIO specifier for the ready/busy# pin. - -For inline partition table parsing (optional): - - - #address-cells: should be set to 1 - - #size-cells: should be set to 1 - -Example for an AM33xx board: - - gpmc: gpmc@50000000 { - compatible = "ti,am3352-gpmc"; - ti,hwmods = "gpmc"; - reg = <0x50000000 0x36c>; - interrupts = <100>; - gpmc,num-cs = <8>; - gpmc,num-waitpins = <2>; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0x08000000 0x1000000>; /* CS0 space, 16MB */ - elm_id = <&elm>; - interrupt-controller; - #interrupt-cells = <2>; - - nand@0,0 { - compatible = "ti,omap2-nand"; - reg = <0 0 4>; /* CS0, offset 0, NAND I/O window 4 */ - interrupt-parent = <&gpmc>; - interrupts = <0 IRQ_TYPE_NONE>, <1 IRQ_TYPE NONE>; - nand-bus-width = <16>; - ti,nand-ecc-opt = "bch8"; - ti,nand-xfer-type = "polled"; - rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ - - gpmc,sync-clk-ps = <0>; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <44>; - gpmc,cs-wr-off-ns = <44>; - gpmc,adv-on-ns = <6>; - gpmc,adv-rd-off-ns = <34>; - gpmc,adv-wr-off-ns = <44>; - gpmc,we-off-ns = <40>; - gpmc,oe-off-ns = <54>; - gpmc,access-ns = <64>; - gpmc,rd-cycle-ns = <82>; - gpmc,wr-cycle-ns = <82>; - gpmc,wr-access-ns = <40>; - gpmc,wr-data-mux-bus-ns = <0>; - - #address-cells = <1>; - #size-cells = <1>; - - /* partitions go here */ - }; - }; - -How to select correct ECC scheme for your device ? --------------------------------------------------- -Higher ECC scheme usually means better protection against bit-flips and -increased system lifetime. However, selection of ECC scheme is dependent -on various other factors also like; - -(1) support of built in hardware engines. - Some legacy OMAP SoC do not have ELM harware engine, so those SoC cannot - support ecc-schemes with hardware error-correction (BCHx_HW). However - such SoC can use ecc-schemes with software library for error-correction - (BCHx_HW_DETECTION_SW). The error correction capability with software - library remains equivalent to their hardware counter-part, but there is - slight CPU penalty when too many bit-flips are detected during reads. - -(2) Device parameters like OOBSIZE. - Other factor which governs the selection of ecc-scheme is oob-size. - Higher ECC schemes require more OOB/Spare area to store ECC syndrome, - so the device should have enough free bytes available its OOB/Spare - area to accommodate ECC for entire page. In general following expression - helps in determining if given device can accommodate ECC syndrome: - "2 + (PAGESIZE / 512) * ECC_BYTES" <= OOBSIZE" - where - OOBSIZE number of bytes in OOB/spare area - PAGESIZE number of bytes in main-area of device page - ECC_BYTES number of ECC bytes generated to protect - 512 bytes of data, which is: - '3' for HAM1_xx ecc schemes - '7' for BCH4_xx ecc schemes - '14' for BCH8_xx ecc schemes - '26' for BCH16_xx ecc schemes - - Example(a): For a device with PAGESIZE = 2048 and OOBSIZE = 64 and - trying to use BCH16 (ECC_BYTES=26) ecc-scheme. - Number of ECC bytes per page = (2 + (2048 / 512) * 26) = 106 B - which is greater than capacity of NAND device (OOBSIZE=64) - Hence, BCH16 cannot be supported on given device. But it can - probably use lower ecc-schemes like BCH8. - - Example(b): For a device with PAGESIZE = 2048 and OOBSIZE = 128 and - trying to use BCH16 (ECC_BYTES=26) ecc-scheme. - Number of ECC bytes per page = (2 + (2048 / 512) * 26) = 106 B - which can be accommodated in the OOB/Spare area of this device - (OOBSIZE=128). So this device can use BCH16 ecc-scheme. diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt deleted file mode 100644 index 2133be0d52f2..000000000000 --- a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt +++ /dev/null @@ -1,98 +0,0 @@ -Device tree bindings for NOR flash connect to TI GPMC - -NOR flash connected to the TI GPMC (found on OMAP boards) are represented as -child nodes of the GPMC controller with a name of "nor". - -All timing relevant properties as well as generic GPMC child properties are -explained in a separate documents. Please refer to -Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt - -Required properties: -- bank-width: Width of NOR flash in bytes. GPMC supports 8-bit and - 16-bit devices and so must be either 1 or 2 bytes. -- compatible: Documentation/devicetree/bindings/mtd/mtd-physmap.yaml -- gpmc,cs-on-ns: Chip-select assertion time -- gpmc,cs-rd-off-ns: Chip-select de-assertion time for reads -- gpmc,cs-wr-off-ns: Chip-select de-assertion time for writes -- gpmc,oe-on-ns: Output-enable assertion time -- gpmc,oe-off-ns: Output-enable de-assertion time -- gpmc,we-on-ns Write-enable assertion time -- gpmc,we-off-ns: Write-enable de-assertion time -- gpmc,access-ns: Start cycle to first data capture (read access) -- gpmc,rd-cycle-ns: Total read cycle time -- gpmc,wr-cycle-ns: Total write cycle time -- linux,mtd-name: Documentation/devicetree/bindings/mtd/mtd-physmap.yaml -- reg: Chip-select, base address (relative to chip-select) - and size of NOR flash. Note that base address will be - typically 0 as this is the start of the chip-select. - -Optional properties: -- gpmc,XXX Additional GPMC timings and settings parameters. See - Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt - -Optional properties for partition table parsing: -- #address-cells: should be set to 1 -- #size-cells: should be set to 1 - -Example: - -gpmc: gpmc@6e000000 { - compatible = "ti,omap3430-gpmc", "simple-bus"; - ti,hwmods = "gpmc"; - reg = <0x6e000000 0x1000>; - interrupts = <20>; - gpmc,num-cs = <8>; - gpmc,num-waitpins = <4>; - #address-cells = <2>; - #size-cells = <1>; - - ranges = <0 0 0x10000000 0x08000000>; - - nor@0,0 { - compatible = "cfi-flash"; - linux,mtd-name= "intel,pf48f6000m0y1be"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0 0 0x08000000>; - bank-width = <2>; - - gpmc,mux-add-data; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <186>; - gpmc,cs-wr-off-ns = <186>; - gpmc,adv-on-ns = <12>; - gpmc,adv-rd-off-ns = <48>; - gpmc,adv-wr-off-ns = <48>; - gpmc,oe-on-ns = <54>; - gpmc,oe-off-ns = <168>; - gpmc,we-on-ns = <54>; - gpmc,we-off-ns = <168>; - gpmc,rd-cycle-ns = <186>; - gpmc,wr-cycle-ns = <186>; - gpmc,access-ns = <114>; - gpmc,page-burst-access-ns = <6>; - gpmc,bus-turnaround-ns = <12>; - gpmc,cycle2cycle-delay-ns = <18>; - gpmc,wr-data-mux-bus-ns = <90>; - gpmc,wr-access-ns = <186>; - gpmc,cycle2cycle-samecsen; - gpmc,cycle2cycle-diffcsen; - - partition@0 { - label = "bootloader-nor"; - reg = <0 0x40000>; - }; - partition@40000 { - label = "params-nor"; - reg = <0x40000 0x40000>; - }; - partition@80000 { - label = "kernel-nor"; - reg = <0x80000 0x200000>; - }; - partition@280000 { - label = "filesystem-nor"; - reg = <0x240000 0x7d80000>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt deleted file mode 100644 index e9f01a963a0a..000000000000 --- a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt +++ /dev/null @@ -1,48 +0,0 @@ -Device tree bindings for GPMC connected OneNANDs - -GPMC connected OneNAND (found on OMAP boards) are represented as child nodes of -the GPMC controller with a name of "onenand". - -All timing relevant properties as well as generic gpmc child properties are -explained in a separate documents - please refer to -Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt - -Required properties: - - - compatible: "ti,omap2-onenand" - - reg: The CS line the peripheral is connected to - - gpmc,device-width: Width of the ONENAND device connected to the GPMC - in bytes. Must be 1 or 2. - -Optional properties: - - - int-gpios: GPIO specifier for the INT pin. - -For inline partition table parsing (optional): - - - #address-cells: should be set to 1 - - #size-cells: should be set to 1 - -Example for an OMAP3430 board: - - gpmc: gpmc@6e000000 { - compatible = "ti,omap3430-gpmc"; - ti,hwmods = "gpmc"; - reg = <0x6e000000 0x1000000>; - interrupts = <20>; - gpmc,num-cs = <8>; - gpmc,num-waitpins = <4>; - #address-cells = <2>; - #size-cells = <1>; - - onenand@0 { - compatible = "ti,omap2-onenand"; - reg = <0 0 0>; /* CS0, offset 0 */ - gpmc,device-width = <2>; - - #address-cells = <1>; - #size-cells = <1>; - - /* partitions go here */ - }; - }; diff --git a/Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml b/Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml new file mode 100644 index 000000000000..beb26b9bcfb2 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/ti,gpmc-nand.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments GPMC NAND Flash controller. + +maintainers: + - Tony Lindgren <tony@atomide.com> + - Roger Quadros <rogerq@kernel.org> + +description: + GPMC NAND controller/Flash is represented as a child of the + GPMC controller node. + +properties: + compatible: + const: ti,omap2-nand + + reg: + maxItems: 1 + + interrupts: + items: + - description: Interrupt for fifoevent + - description: Interrupt for termcount + + "#address-cells": true + + "#size-cells": true + + ti,nand-ecc-opt: + description: Desired ECC algorithm + $ref: /schemas/types.yaml#/definitions/string + enum: [sw, ham1, bch4, bch8, bch16] + + ti,nand-xfer-type: + description: Data transfer method between controller and chip. + $ref: /schemas/types.yaml#/definitions/string + enum: [prefetch-polled, polled, prefetch-dma, prefetch-irq] + default: prefetch-polled + + ti,elm-id: + description: + phandle to the ELM (Error Location Module). + $ref: /schemas/types.yaml#/definitions/phandle + + nand-bus-width: + description: + Bus width to the NAND chip + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [8, 16] + default: 8 + +patternProperties: + "@[0-9a-f]+$": + $ref: "/schemas/mtd/partitions/partition.yaml" + +allOf: + - $ref: "/schemas/memory-controllers/ti,gpmc-child.yaml" + +required: + - compatible + - reg + - ti,nand-ecc-opt + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/gpio/gpio.h> + + gpmc: memory-controller@50000000 { + compatible = "ti,am3352-gpmc"; + dmas = <&edma 52 0>; + dma-names = "rxtx"; + clocks = <&l3s_gclk>; + clock-names = "fck"; + reg = <0x50000000 0x2000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + gpmc,num-cs = <7>; + gpmc,num-waitpins = <2>; + #address-cells = <2>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + + ranges = <0 0 0x08000000 0x01000000>; /* CS0 space. Min partition = 16MB */ + nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* device IO registers */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + ti,nand-xfer-type = "prefetch-dma"; + ti,nand-ecc-opt = "bch16"; + ti,elm-id = <&elm>; + #address-cells = <1>; + #size-cells = <1>; + + /* NAND generic properties */ + nand-bus-width = <8>; + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ + + /* GPMC properties*/ + gpmc,device-width = <1>; + + partition@0 { + label = "NAND.SPL"; + reg = <0x00000000 0x00040000>; + }; + partition@1 { + label = "NAND.SPL.backup1"; + reg = <0x00040000 0x00040000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml b/Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml new file mode 100644 index 000000000000..a953f7397c40 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/ti,gpmc-onenand.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OneNAND over Texas Instruments GPMC bus. + +maintainers: + - Tony Lindgren <tony@atomide.com> + - Roger Quadros <rogerq@kernel.org> + +description: + GPMC connected OneNAND (found on OMAP boards) are represented + as child nodes of the GPMC controller. + +properties: + compatible: + const: ti,omap2-onenand + + reg: + items: + - description: | + Chip Select number, register offset and size of + OneNAND register window. + + "#address-cells": true + + "#size-cells": true + + int-gpios: + description: GPIO specifier for the INT pin. + +patternProperties: + "@[0-9a-f]+$": + $ref: "/schemas/mtd/partitions/partition.yaml" + +allOf: + - $ref: "/schemas/memory-controllers/ti,gpmc-child.yaml" + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +unevaluatedProperties: false + +examples: + - | + gpmc: memory-controller@6e000000 { + compatible = "ti,omap3430-gpmc"; + reg = <0x6e000000 0x02d0>; + interrupts = <20>; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <4>; + clocks = <&l3s_clkctrl>; + clock-names = "fck"; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0 0 0x01000000 0x01000000>, /* 16 MB for OneNAND */ + <1 0 0x02000000 0x01000000>; /* 16 MB for smc91c96 */ + + onenand@0,0 { + compatible = "ti,omap2-onenand"; + reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */ + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader"; + reg = <0x00000000 0x00100000>; + }; + + partition@100000 { + label = "config"; + reg = <0x00100000 0x002c0000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/gpmc-eth.txt b/Documentation/devicetree/bindings/net/gpmc-eth.txt deleted file mode 100644 index 32821066a85b..000000000000 --- a/Documentation/devicetree/bindings/net/gpmc-eth.txt +++ /dev/null @@ -1,97 +0,0 @@ -Device tree bindings for Ethernet chip connected to TI GPMC - -Besides being used to interface with external memory devices, the -General-Purpose Memory Controller can be used to connect Pseudo-SRAM devices -such as ethernet controllers to processors using the TI GPMC as a data bus. - -Ethernet controllers connected to TI GPMC are represented as child nodes of -the GPMC controller with an "ethernet" name. - -All timing relevant properties as well as generic GPMC child properties are -explained in a separate documents. Please refer to -Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt - -For the properties relevant to the ethernet controller connected to the GPMC -refer to the binding documentation of the device. For example, the documentation -for the SMSC 911x is Documentation/devicetree/bindings/net/smsc,lan9115.yaml - -Child nodes need to specify the GPMC bus address width using the "bank-width" -property but is possible that an ethernet controller also has a property to -specify the I/O registers address width. Even when the GPMC has a maximum 16-bit -address width, it supports devices with 32-bit word registers. -For example with an SMSC LAN911x/912x controller connected to the TI GPMC on an -OMAP2+ board, "bank-width = <2>;" and "reg-io-width = <4>;". - -Required properties: -- bank-width: Address width of the device in bytes. GPMC supports 8-bit - and 16-bit devices and so must be either 1 or 2 bytes. -- compatible: Compatible string property for the ethernet child device. -- gpmc,cs-on-ns: Chip-select assertion time -- gpmc,cs-rd-off-ns: Chip-select de-assertion time for reads -- gpmc,cs-wr-off-ns: Chip-select de-assertion time for writes -- gpmc,oe-on-ns: Output-enable assertion time -- gpmc,oe-off-ns: Output-enable de-assertion time -- gpmc,we-on-ns: Write-enable assertion time -- gpmc,we-off-ns: Write-enable de-assertion time -- gpmc,access-ns: Start cycle to first data capture (read access) -- gpmc,rd-cycle-ns: Total read cycle time -- gpmc,wr-cycle-ns: Total write cycle time -- reg: Chip-select, base address (relative to chip-select) - and size of the memory mapped for the device. - Note that base address will be typically 0 as this - is the start of the chip-select. - -Optional properties: -- gpmc,XXX Additional GPMC timings and settings parameters. See - Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt - -Example: - -gpmc: gpmc@6e000000 { - compatible = "ti,omap3430-gpmc"; - ti,hwmods = "gpmc"; - reg = <0x6e000000 0x1000>; - interrupts = <20>; - gpmc,num-cs = <8>; - gpmc,num-waitpins = <4>; - #address-cells = <2>; - #size-cells = <1>; - - ranges = <5 0 0x2c000000 0x1000000>; - - ethernet@5,0 { - compatible = "smsc,lan9221", "smsc,lan9115"; - reg = <5 0 0xff>; - bank-width = <2>; - - gpmc,mux-add-data; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <186>; - gpmc,cs-wr-off-ns = <186>; - gpmc,adv-on-ns = <12>; - gpmc,adv-rd-off-ns = <48>; - gpmc,adv-wr-off-ns = <48>; - gpmc,oe-on-ns = <54>; - gpmc,oe-off-ns = <168>; - gpmc,we-on-ns = <54>; - gpmc,we-off-ns = <168>; - gpmc,rd-cycle-ns = <186>; - gpmc,wr-cycle-ns = <186>; - gpmc,access-ns = <114>; - gpmc,page-burst-access-ns = <6>; - gpmc,bus-turnaround-ns = <12>; - gpmc,cycle2cycle-delay-ns = <18>; - gpmc,wr-data-mux-bus-ns = <90>; - gpmc,wr-access-ns = <186>; - gpmc,cycle2cycle-samecsen; - gpmc,cycle2cycle-diffcsen; - - interrupt-parent = <&gpio6>; - interrupts = <16>; - vmmc-supply = <&vddvario>; - vmmc_aux-supply = <&vdd33a>; - reg-io-width = <4>; - - smsc,save-mac-address; - }; -}; diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt index 6a99d2aa8075..8e4f9bfb316d 100644 --- a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt @@ -197,7 +197,7 @@ Tegra194 RC mode: Tegra194 EP mode: ----------------- - pcie_ep@141a0000 { + pcie-ep@141a0000 { compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>; reg = <0x00 0x141a0000 0x0 0x00020000 /* appl registers (128K) */ diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt deleted file mode 100644 index f1bbe0826be5..000000000000 --- a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt +++ /dev/null @@ -1,22 +0,0 @@ -* Freescale LINFlexD UART - -The LINFlexD controller implements several LIN protocol versions, as well as -support for full-duplex UART communication through 8-bit and 9-bit frames. - -See chapter 47 ("LINFlexD") in the reference manual[1]. - -Required properties: -- compatible : - - "fsl,s32v234-linflexuart" for LINFlexD configured in UART mode, which - is compatible with the one integrated on S32V234 SoC -- reg : Address and length of the register set for the device -- interrupts : Should contain uart interrupt - -Example: -uart0: serial@40053000 { - compatible = "fsl,s32v234-linflexuart"; - reg = <0x0 0x40053000 0x0 0x1000>; - interrupts = <0 59 4>; -}; - -[1] https://www.nxp.com/webapp/Download?colCode=S32V234RM diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml new file mode 100644 index 000000000000..8b643bae3c7b --- /dev/null +++ b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/fsl,s32-linflexuart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale LINFlexD UART + +description: | + The LINFlexD controller implements several LIN protocol versions, as well + as support for full-duplex UART communication through 8-bit and 9-bit + frames. See chapter 47 ("LINFlexD") in the reference manual + https://www.nxp.com/webapp/Download?colCode=S32V234RM. + +maintainers: + - Chester Lin <clin@suse.com> + +allOf: + - $ref: "serial.yaml" + +properties: + compatible: + oneOf: + - const: fsl,s32v234-linflexuart + - items: + - const: nxp,s32g2-linflexuart + - const: fsl,s32v234-linflexuart + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + serial@40053000 { + compatible = "fsl,s32v234-linflexuart"; + reg = <0x40053000 0x1000>; + interrupts = <0 59 4>; + }; diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml new file mode 100644 index 000000000000..ecd86cfb3da4 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8MM DISP blk-ctrl + +maintainers: + - Lucas Stach <l.stach@pengutronix.de> + +description: + The i.MX8MM DISP blk-ctrl is a top-level peripheral providing access to + the NoC and ensuring proper power sequencing of the display and MIPI CSI + peripherals located in the DISP domain of the SoC. + +properties: + compatible: + items: + - const: fsl,imx8mm-disp-blk-ctrl + - const: syscon + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + + power-domains: + minItems: 5 + maxItems: 5 + + power-domain-names: + items: + - const: bus + - const: csi-bridge + - const: lcdif + - const: mipi-dsi + - const: mipi-csi + + clocks: + minItems: 10 + maxItems: 10 + + clock-names: + items: + - const: csi-bridge-axi + - const: csi-bridge-apb + - const: csi-bridge-core + - const: lcdif-axi + - const: lcdif-apb + - const: lcdif-pix + - const: dsi-pclk + - const: dsi-ref + - const: csi-aclk + - const: csi-pclk + +required: + - compatible + - reg + - power-domains + - power-domain-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mm-clock.h> + #include <dt-bindings/power/imx8mm-power.h> + + disp_blk_ctl: blk_ctrl@32e28000 { + compatible = "fsl,imx8mm-disp-blk-ctrl", "syscon"; + reg = <0x32e28000 0x100>; + power-domains = <&pgc_dispmix>, <&pgc_dispmix>, <&pgc_dispmix>, + <&pgc_mipi>, <&pgc_mipi>; + power-domain-names = "bus", "csi-bridge", "lcdif", + "mipi-dsi", "mipi-csi"; + clocks = <&clk IMX8MM_CLK_DISP_AXI_ROOT>, + <&clk IMX8MM_CLK_DISP_APB_ROOT>, + <&clk IMX8MM_CLK_CSI1_ROOT>, + <&clk IMX8MM_CLK_DISP_AXI_ROOT>, + <&clk IMX8MM_CLK_DISP_APB_ROOT>, + <&clk IMX8MM_CLK_DISP_ROOT>, + <&clk IMX8MM_CLK_DSI_CORE>, + <&clk IMX8MM_CLK_DSI_PHY_REF>, + <&clk IMX8MM_CLK_CSI1_CORE>, + <&clk IMX8MM_CLK_CSI1_PHY_REF>; + clock-names = "csi-bridge-axi", "csi-bridge-apb", "csi-bridge-core", + "lcdif-axi", "lcdif-apb", "lcdif-pix", "dsi-pclk", + "dsi-ref", "csi-aclk", "csi-pclk"; + #power-domain-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml new file mode 100644 index 000000000000..26487daa64d9 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8MM VPU blk-ctrl + +maintainers: + - Lucas Stach <l.stach@pengutronix.de> + +description: + The i.MX8MM VPU blk-ctrl is a top-level peripheral providing access to + the NoC and ensuring proper power sequencing of the VPU peripherals + located in the VPU domain of the SoC. + +properties: + compatible: + items: + - const: fsl,imx8mm-vpu-blk-ctrl + - const: syscon + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + + power-domains: + minItems: 4 + maxItems: 4 + + power-domain-names: + items: + - const: bus + - const: g1 + - const: g2 + - const: h1 + + clocks: + minItems: 3 + maxItems: 3 + + clock-names: + items: + - const: g1 + - const: g2 + - const: h1 + +required: + - compatible + - reg + - power-domains + - power-domain-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mm-clock.h> + #include <dt-bindings/power/imx8mm-power.h> + + vpu_blk_ctrl: blk-ctrl@38330000 { + compatible = "fsl,imx8mm-vpu-blk-ctrl", "syscon"; + reg = <0x38330000 0x100>; + power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>, + <&pgc_vpu_g2>, <&pgc_vpu_h1>; + power-domain-names = "bus", "g1", "g2", "h1"; + clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>, + <&clk IMX8MM_CLK_VPU_G2_ROOT>, + <&clk IMX8MM_CLK_VPU_H1_ROOT>; + clock-names = "g1", "g2", "h1"; + #power-domain-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml index 39b66e9ce3e3..7d48ea094c66 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml @@ -21,6 +21,9 @@ properties: - const: allwinner,sun8i-a83t-i2s - const: allwinner,sun8i-h3-i2s - items: + - const: allwinner,sun8i-r40-i2s + - const: allwinner,sun8i-h3-i2s + - items: - const: allwinner,sun8i-v3-i2s - const: allwinner,sun8i-h3-i2s - const: allwinner,sun50i-a64-codec-i2s diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index a826ac73feec..518487ec65e5 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -193,6 +193,8 @@ patternProperties: description: B&R Industrial Automation GmbH "^bticino,.*": description: Bticino International + "^calamp,.*": + description: CalAmp Corp. "^calaosystems,.*": description: CALAO Systems SAS "^calxeda,.*": @@ -337,6 +339,8 @@ patternProperties: description: EBV Elektronik "^eckelmann,.*": description: Eckelmann AG + "^edimax,.*": + description: EDIMAX Technology Co., Ltd "^edt,.*": description: Emerging Display Technologies "^eeti,.*": @@ -397,6 +401,8 @@ patternProperties: description: Exar Corporation "^excito,.*": description: Excito + "^exegin,.*": + description: Exegin Technologies Limited "^ezchip,.*": description: EZchip Semiconductor "^facebook,.*": @@ -581,6 +587,8 @@ patternProperties: description: JEDEC Solid State Technology Association "^jesurun,.*": description: Shenzhen Jesurun Electronics Business Dept. + "^jethome,.*": + description: JetHome (IP Sokolov P.A.) "^jianda,.*": description: Jiandangjing Technology Co., Ltd. "^kam,.*": @@ -1108,6 +1116,8 @@ patternProperties: description: SpinalHDL "^sprd,.*": description: Spreadtrum Communications Inc. + "^ssi,.*": + description: SSI Computer Corp "^sst,.*": description: Silicon Storage Technology, Inc. "^sstar,.*": diff --git a/MAINTAINERS b/MAINTAINERS index 0f0b4873b08c..83321332f63e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6352,6 +6352,7 @@ L: linux-tegra@vger.kernel.org S: Supported T: git git://anongit.freedesktop.org/tegra/linux.git F: Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt +F: Documentation/devicetree/bindings/gpu/host1x/ F: drivers/gpu/drm/tegra/ F: drivers/gpu/host1x/ F: include/linux/host1x.h diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 7e0934180724..0de64f237cd8 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -25,6 +25,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ usb_a9263.dtb \ at91-foxg20.dtb \ at91-kizbox.dtb \ + at91-lmu5000.dtb \ at91sam9g20ek.dtb \ at91sam9g20ek_2mmc.dtb \ tny_a9g20.dtb \ @@ -40,6 +41,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ at91-kizboxmini-base.dtb \ at91-kizboxmini-mb.dtb \ at91-kizboxmini-rd.dtb \ + at91-q5xr5.dtb \ at91-smartkiz.dtb \ at91-wb45n.dtb \ at91sam9g15ek.dtb \ @@ -92,6 +94,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2837-rpi-cm3-io3.dtb \ bcm2711-rpi-400.dtb \ bcm2711-rpi-4-b.dtb \ + bcm2711-rpi-cm4-io.dtb \ bcm2835-rpi-zero.dtb \ bcm2835-rpi-zero-w.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += \ @@ -117,6 +120,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4709-netgear-r7000.dtb \ bcm4709-netgear-r8000.dtb \ bcm4709-tplink-archer-c9-v1.dtb \ + bcm47094-asus-rt-ac88u.dtb \ bcm47094-dlink-dir-885l.dtb \ bcm47094-linksys-panamera.dtb \ bcm47094-luxul-abr-4500.dtb \ @@ -157,6 +161,12 @@ dtb-$(CONFIG_ARCH_BCM_NSP) += \ bcm958525xmc.dtb \ bcm958622hr.dtb \ bcm958623hr.dtb \ + bcm958625-meraki-mx64.dtb \ + bcm958625-meraki-mx64-a0.dtb \ + bcm958625-meraki-mx64w.dtb \ + bcm958625-meraki-mx64w-a0.dtb \ + bcm958625-meraki-mx65.dtb \ + bcm958625-meraki-mx65w.dtb \ bcm958625hr.dtb \ bcm988312hr.dtb \ bcm958625k.dtb @@ -219,9 +229,11 @@ dtb-$(CONFIG_ARCH_GEMINI) += \ gemini-dlink-dir-685.dtb \ gemini-dlink-dns-313.dtb \ gemini-nas4220b.dtb \ + gemini-ns2502.dtb \ gemini-rut1xx.dtb \ gemini-sl93512r.dtb \ gemini-sq201.dtb \ + gemini-ssi1328.dtb \ gemini-wbd111.dtb \ gemini-wbd222.dtb dtb-$(CONFIG_ARCH_HI3xxx) += \ @@ -635,10 +647,12 @@ dtb-$(CONFIG_SOC_IMX6SL) += \ imx6sl-evk.dtb \ imx6sl-tolino-shine2hd.dtb \ imx6sl-tolino-shine3.dtb \ + imx6sl-tolino-vision5.dtb \ imx6sl-warp.dtb dtb-$(CONFIG_SOC_IMX6SLL) += \ imx6sll-evk.dtb \ - imx6sll-kobo-clarahd.dtb + imx6sll-kobo-clarahd.dtb \ + imx6sll-kobo-librah2o.dtb dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-nitrogen6sx.dtb \ imx6sx-sabreauto.dtb \ @@ -671,6 +685,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-tx6ul-0011.dtb \ imx6ul-tx6ul-mainboard.dtb \ imx6ull-14x14-evk.dtb \ + imx6ull-colibri-emmc-eval-v3.dtb \ imx6ull-colibri-eval-v3.dtb \ imx6ull-colibri-wifi-eval-v3.dtb \ imx6ull-myir-mys-6ulx-eval.dtb \ @@ -939,6 +954,7 @@ dtb-$(CONFIG_ARCH_OXNAS) += \ ox810se-wd-mbwe.dtb \ ox820-cloudengines-pogoplug-series-3.dtb dtb-$(CONFIG_ARCH_QCOM) += \ + qcom-apq8026-lg-lenok.dtb \ qcom-apq8060-dragonboard.dtb \ qcom-apq8064-cm-qs600.dtb \ qcom-apq8064-ifc6410.dtb \ @@ -959,6 +975,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-ipq8064-rb3011.dtb \ qcom-msm8226-samsung-s3ve3g.dtb \ qcom-msm8660-surf.dtb \ + qcom-msm8916-samsung-serranove.dtb \ qcom-msm8960-cdp.dtb \ qcom-msm8974-fairphone-fp2.dtb \ qcom-msm8974-lge-nexus5-hammerhead.dtb \ @@ -1075,6 +1092,7 @@ dtb-$(CONFIG_ARCH_S5PV210) += \ s5pv210-torbreck.dtb dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \ socfpga_arria5_socdk.dtb \ + socfpga_arria10_mercury_aa1.dtb \ socfpga_arria10_socdk_nand.dtb \ socfpga_arria10_socdk_qspi.dtb \ socfpga_arria10_socdk_sdmmc.dtb \ @@ -1113,6 +1131,7 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32h743i-eval.dtb \ stm32h743i-disco.dtb \ stm32h750i-art-pi.dtb \ + stm32mp135f-dk.dtb \ stm32mp153c-dhcom-drc02.dtb \ stm32mp157a-avenger96.dtb \ stm32mp157a-dhcor-avenger96.dtb \ @@ -1387,6 +1406,7 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \ dtb-$(CONFIG_MACH_ARMADA_375) += \ armada-375-db.dtb dtb-$(CONFIG_MACH_ARMADA_38X) += \ + armada-381-netgear-gs110emx.dtb \ armada-382-rd-ac3x-48g4x2xl.dtb \ armada-385-atl-x530.dtb\ armada-385-clearfog-gtr-s4.dtb \ @@ -1497,4 +1517,6 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-opp-zaius.dtb \ aspeed-bmc-portwell-neptune.dtb \ aspeed-bmc-quanta-q71l.dtb \ - aspeed-bmc-supermicro-x11spi.dtb + aspeed-bmc-supermicro-x11spi.dtb \ + aspeed-bmc-inventec-transformers.dtb \ + aspeed-bmc-tyan-s7106.dtb diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts index 209cdd17dc1e..5e415d8ffdd8 100644 --- a/arch/arm/boot/dts/am335x-pocketbeagle.dts +++ b/arch/arm/boot/dts/am335x-pocketbeagle.dts @@ -205,6 +205,7 @@ &am33xx_pinmux { + compatible = "pinconf-single"; pinctrl-names = "default"; pinctrl-0 = < &P2_03_gpio &P1_34_gpio &P2_19_gpio &P2_24_gpio diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi index 04e8a27ba1eb..2dfb32bf9d48 100644 --- a/arch/arm/boot/dts/arm-realview-eb.dtsi +++ b/arch/arm/boot/dts/arm-realview-eb.dtsi @@ -198,96 +198,112 @@ syscon: syscon@10000000 { compatible = "arm,realview-eb-syscon", "syscon", "simple-mfd"; reg = <0x10000000 0x1000>; + ranges = <0x0 0x10000000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; - led@08.0 { + led@8,0 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x01>; label = "versatile:0"; linux,default-trigger = "heartbeat"; default-state = "on"; }; - led@08.1 { + led@8,1 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x02>; label = "versatile:1"; linux,default-trigger = "mmc0"; default-state = "off"; }; - led@08.2 { + led@8,2 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x04>; label = "versatile:2"; linux,default-trigger = "cpu0"; default-state = "off"; }; - led@08.3 { + led@8,3 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x08>; label = "versatile:3"; default-state = "off"; }; - led@08.4 { + led@8,4 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x10>; label = "versatile:4"; default-state = "off"; }; - led@08.5 { + led@8,5 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x20>; label = "versatile:5"; default-state = "off"; }; - led@08.6 { + led@8,6 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x40>; label = "versatile:6"; default-state = "off"; }; - led@08.7 { + led@8,7 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x80>; label = "versatile:7"; default-state = "off"; }; - oscclk0: osc0@0c { + oscclk0: clock-controller@c { compatible = "arm,syscon-icst307"; + reg = <0x0c 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x0C>; clocks = <&xtal24mhz>; }; - oscclk1: osc1@10 { + oscclk1: clock-controller@10 { compatible = "arm,syscon-icst307"; + reg = <0x10 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x10>; clocks = <&xtal24mhz>; }; - oscclk2: osc2@14 { + oscclk2: clock-controller@14 { compatible = "arm,syscon-icst307"; + reg = <0x14 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x14>; clocks = <&xtal24mhz>; }; - oscclk3: osc3@18 { + oscclk3: clock-controller@18 { compatible = "arm,syscon-icst307"; + reg = <0x18 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x18>; clocks = <&xtal24mhz>; }; - oscclk4: osc4@1c { + oscclk4: clock-controller@1c { compatible = "arm,syscon-icst307"; + reg = <0x1c 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x1c>; diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index 366687fb1ee3..06b8723b09eb 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -216,96 +216,112 @@ syscon: syscon@10000000 { compatible = "arm,realview-pb1176-syscon", "syscon", "simple-mfd"; reg = <0x10000000 0x1000>; + ranges = <0x0 0x10000000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; - led@08.0 { + led@8,0 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x01>; label = "versatile:0"; linux,default-trigger = "heartbeat"; default-state = "on"; }; - led@08.1 { + led@8,1 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x02>; label = "versatile:1"; linux,default-trigger = "mmc0"; default-state = "off"; }; - led@08.2 { + led@8,2 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x04>; label = "versatile:2"; linux,default-trigger = "cpu0"; default-state = "off"; }; - led@08.3 { + led@8,3 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x08>; label = "versatile:3"; default-state = "off"; }; - led@08.4 { + led@8,4 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x10>; label = "versatile:4"; default-state = "off"; }; - led@08.5 { + led@8,5 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x20>; label = "versatile:5"; default-state = "off"; }; - led@08.6 { + led@8,6 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x40>; label = "versatile:6"; default-state = "off"; }; - led@08.7 { + led@8,7 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x80>; label = "versatile:7"; default-state = "off"; }; - oscclk0: osc0@0c { + oscclk0: clock-controller@c { compatible = "arm,syscon-icst307"; + reg = <0x0c 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x0C>; clocks = <&xtal24mhz>; }; - oscclk1: osc1@10 { + oscclk1: clock-controller@10 { compatible = "arm,syscon-icst307"; + reg = <0x10 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x10>; clocks = <&xtal24mhz>; }; - oscclk2: osc2@14 { + oscclk2: clock-controller@14 { compatible = "arm,syscon-icst307"; + reg = <0x14 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x14>; clocks = <&xtal24mhz>; }; - oscclk3: osc3@18 { + oscclk3: clock-controller@18 { compatible = "arm,syscon-icst307"; + reg = <0x18 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x18>; clocks = <&xtal24mhz>; }; - oscclk4: osc4@1c { + oscclk4: clock-controller@1c { compatible = "arm,syscon-icst307"; + reg = <0x1c 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x1c>; diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts index 228a51a38f95..295aef448123 100644 --- a/arch/arm/boot/dts/arm-realview-pb11mp.dts +++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts @@ -303,114 +303,132 @@ pb11mp_syscon: syscon@10000000 { compatible = "arm,realview-pb11mp-syscon", "syscon", "simple-mfd"; reg = <0x10000000 0x1000>; + ranges = <0x0 0x10000000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; - led@08.0 { + led@8,0 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x01>; label = "versatile:0"; linux,default-trigger = "heartbeat"; default-state = "on"; }; - led@08.1 { + led@8,1 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x02>; label = "versatile:1"; linux,default-trigger = "mmc0"; default-state = "off"; }; - led@08.2 { + led@8,2 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x04>; label = "versatile:2"; linux,default-trigger = "cpu0"; default-state = "off"; }; - led@08.3 { + led@8,3 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x08>; label = "versatile:3"; linux,default-trigger = "cpu1"; default-state = "off"; }; - led@08.4 { + led@8,4 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x10>; label = "versatile:4"; linux,default-trigger = "cpu2"; default-state = "off"; }; - led@08.5 { + led@8,5 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x20>; label = "versatile:5"; linux,default-trigger = "cpu3"; default-state = "off"; }; - led@08.6 { + led@8,6 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x40>; label = "versatile:6"; default-state = "off"; }; - led@08.7 { + led@8,7 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x80>; label = "versatile:7"; default-state = "off"; }; - oscclk0: osc0@0c { + oscclk0: clock-controller@c { compatible = "arm,syscon-icst307"; + reg = <0x0c 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x0C>; clocks = <&xtal24mhz>; }; - oscclk1: osc1@10 { + oscclk1: clock-controller@10 { compatible = "arm,syscon-icst307"; + reg = <0x10 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x10>; clocks = <&xtal24mhz>; }; - oscclk2: osc2@14 { + oscclk2: clock-controller@14 { compatible = "arm,syscon-icst307"; + reg = <0x14 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x14>; clocks = <&xtal24mhz>; }; - oscclk3: osc3@18 { + oscclk3: clock-controller@18 { compatible = "arm,syscon-icst307"; + reg = <0x18 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x18>; clocks = <&xtal24mhz>; }; - oscclk4: osc4@1c { + oscclk4: clock-controller@1c { compatible = "arm,syscon-icst307"; + reg = <0x1c 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x1c>; clocks = <&xtal24mhz>; }; - oscclk5: osc5@d4 { + oscclk5: clock-controller@d4 { compatible = "arm,syscon-icst307"; + reg = <0xd4 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0xd4>; clocks = <&xtal24mhz>; }; - oscclk6: osc6@d8 { + oscclk6: clock-controller@d8 { compatible = "arm,syscon-icst307"; + reg = <0xd8 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0xd8>; diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi index ccf6f756b6ed..6f61f968d689 100644 --- a/arch/arm/boot/dts/arm-realview-pbx.dtsi +++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi @@ -220,96 +220,112 @@ syscon: syscon@10000000 { compatible = "arm,realview-pbx-syscon", "syscon", "simple-mfd"; reg = <0x10000000 0x1000>; + ranges = <0x0 0x10000000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; - led@08.0 { + led@8,0 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x01>; label = "versatile:0"; linux,default-trigger = "heartbeat"; default-state = "on"; }; - led@08.1 { + led@8,1 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x02>; label = "versatile:1"; linux,default-trigger = "mmc0"; default-state = "off"; }; - led@08.2 { + led@8,2 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x04>; label = "versatile:2"; linux,default-trigger = "cpu0"; default-state = "off"; }; - led@08.3 { + led@8,3 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x08>; label = "versatile:3"; default-state = "off"; }; - led@08.4 { + led@8,4 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x10>; label = "versatile:4"; default-state = "off"; }; - led@08.5 { + led@8,5 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x20>; label = "versatile:5"; default-state = "off"; }; - led@08.6 { + led@8,6 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x40>; label = "versatile:6"; default-state = "off"; }; - led@08.7 { + led@8,7 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x80>; label = "versatile:7"; default-state = "off"; }; - oscclk0: osc0@0c { + oscclk0: clock-controller@c { compatible = "arm,syscon-icst307"; + reg = <0x0c 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x0C>; clocks = <&xtal24mhz>; }; - oscclk1: osc1@10 { + oscclk1: clock-controller@10 { compatible = "arm,syscon-icst307"; + reg = <0x10 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x10>; clocks = <&xtal24mhz>; }; - oscclk2: osc2@14 { + oscclk2: clock-controller@14 { compatible = "arm,syscon-icst307"; + reg = <0x14 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x14>; clocks = <&xtal24mhz>; }; - oscclk3: osc3@18 { + oscclk3: clock-controller@18 { compatible = "arm,syscon-icst307"; + reg = <0x18 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x18>; clocks = <&xtal24mhz>; }; - oscclk4: osc4@1c { + oscclk4: clock-controller@1c { compatible = "arm,syscon-icst307"; + reg = <0x1c 0x04>; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x1c>; diff --git a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts new file mode 100644 index 000000000000..0a961116a1f9 --- /dev/null +++ b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts @@ -0,0 +1,295 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* Copyright (c) 2021, Marcel Ziswiler <marcel@ziswiler.com> */ + +/dts-v1/; +#include "armada-385.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Netgear GS110EMX"; + compatible = "netgear,gs110emx", "marvell,armada380"; + + aliases { + /* So that mvebu u-boot can update the MAC addresses */ + ethernet1 = ð0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&front_button_pins>; + pinctrl-names = "default"; + + factory_default { + label = "Factory Default"; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000>; /* 128 MB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; + + internal-regs { + rtc@a3800 { + /* + * If the rtc doesn't work, run "date reset" + * twice in u-boot. + */ + status = "okay"; + }; + }; + }; +}; + +ð0 { + /* ethernet@70000 */ + bm,pool-long = <0>; + bm,pool-short = <1>; + buffer-manager = <&bm>; + phy-mode = "rgmii-id"; + pinctrl-0 = <&ge0_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + + fixed-link { + full-duplex; + pause; + speed = <1000>; + }; +}; + +&mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + status = "okay"; + + switch@0 { + compatible = "marvell,mv88e6190"; + #address-cells = <1>; + #interrupt-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&switch_interrupt_pins>; + pinctrl-names = "default"; + #size-cells = <0>; + reg = <0>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy1: switch0phy1@1 { + reg = <0x1>; + }; + + switch0phy2: switch0phy2@2 { + reg = <0x2>; + }; + + switch0phy3: switch0phy3@3 { + reg = <0x3>; + }; + + switch0phy4: switch0phy4@4 { + reg = <0x4>; + }; + + switch0phy5: switch0phy5@5 { + reg = <0x5>; + }; + + switch0phy6: switch0phy6@6 { + reg = <0x6>; + }; + + switch0phy7: switch0phy7@7 { + reg = <0x7>; + }; + + switch0phy8: switch0phy8@8 { + reg = <0x8>; + }; + }; + + mdio-external { + compatible = "marvell,mv88e6xxx-mdio-external"; + #address-cells = <1>; + #size-cells = <0>; + + phy1: ethernet-phy@b { + reg = <0xb>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + + phy2: ethernet-phy@c { + reg = <0xc>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + ethernet = <ð0>; + label = "cpu"; + reg = <0>; + + fixed-link { + full-duplex; + pause; + speed = <1000>; + }; + }; + + port@1 { + label = "lan1"; + phy-handle = <&switch0phy1>; + reg = <1>; + }; + + port@2 { + label = "lan2"; + phy-handle = <&switch0phy2>; + reg = <2>; + }; + + port@3 { + label = "lan3"; + phy-handle = <&switch0phy3>; + reg = <3>; + }; + + port@4 { + label = "lan4"; + phy-handle = <&switch0phy4>; + reg = <4>; + }; + + port@5 { + label = "lan5"; + phy-handle = <&switch0phy5>; + reg = <5>; + }; + + port@6 { + label = "lan6"; + phy-handle = <&switch0phy6>; + reg = <6>; + }; + + port@7 { + label = "lan7"; + phy-handle = <&switch0phy7>; + reg = <7>; + }; + + port@8 { + label = "lan8"; + phy-handle = <&switch0phy8>; + reg = <8>; + }; + + port@9 { + /* 88X3310P external phy */ + label = "lan9"; + phy-handle = <&phy1>; + phy-mode = "xaui"; + reg = <9>; + }; + + port@a { + /* 88X3310P external phy */ + label = "lan10"; + phy-handle = <&phy2>; + phy-mode = "xaui"; + reg = <0xa>; + }; + }; + }; +}; + +&pinctrl { + front_button_pins: front-button-pins { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + + switch_interrupt_pins: switch-interrupt-pins { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; +}; + +&spi0 { + pinctrl-0 = <&spi0_pins>; + pinctrl-names = "default"; + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <3000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + read-only; + reg = <0x00000000 0x00100000>; + }; + + partition@100000 { + label = "env"; + reg = <0x00100000 0x00010000>; + }; + + partition@200000 { + label = "rsv"; + reg = <0x00110000 0x00010000>; + }; + + partition@300000 { + label = "image0"; + reg = <0x00120000 0x00900000>; + }; + + partition@400000 { + label = "config"; + reg = <0x00a20000 0x00300000>; + }; + + partition@480000 { + label = "debug"; + reg = <0x00d20000 0x002e0000>; + }; + }; + }; +}; + +&uart0 { + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts index 79d17841b3d7..6406a0f080ee 100644 --- a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts +++ b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts @@ -159,6 +159,11 @@ //24LC128 EEPROM &i2c3 { status = "okay"; + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + pagesize = <64>; + }; }; //P0 Power regulators diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts index 57b0c45a2298..3515d55bd312 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts @@ -86,6 +86,18 @@ linux,code = <ASPEED_GPIO(J, 1)>; }; + S0_scp_auth_fail { + label = "S0_SCP_AUTH_FAIL"; + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(J, 2)>; + }; + + S1_scp_auth_fail { + label = "S1_SCP_AUTH_FAIL"; + gpios = <&gpio ASPEED_GPIO(Z, 5) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(Z, 5)>; + }; + S1_overtemp { label = "S1_OVERTEMP"; gpios = <&gpio ASPEED_GPIO(Z, 6) GPIO_ACTIVE_LOW>; @@ -590,7 +602,7 @@ /*Q0-Q7*/ "","","","","","UID_BUTTON","","", /*R0-R7*/ "","","BMC_EXT_HIGHTEMP_L","OCP_AUX_PWREN", "OCP_MAIN_PWREN","RESET_BUTTON","","", - /*S0-S7*/ "","","","","","","","", + /*S0-S7*/ "","","","","RTC_BAT_SEN_EN","","","", /*T0-T7*/ "","","","","","","","", /*U0-U7*/ "","","","","","","","", /*V0-V7*/ "","","","","","","","", @@ -604,4 +616,11 @@ "S1_BMC_DDR_ADR","","","","", /*AC0-AC7*/ "SYS_PWR_GD","","","","","BMC_READY","SLAVE_PRESENT_L", "BMC_OCP_PG"; + + i2c4_o_en { + gpio-hog; + gpios = <ASPEED_GPIO(Y, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_I2C4_O_EN"; + }; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts index 2efd70666738..f42e2d776ba8 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts @@ -96,6 +96,20 @@ i2c32 = &i2c14mux1chn1; i2c33 = &i2c14mux1chn2; i2c34 = &i2c14mux1chn3; + i2c35 = &i2c15mux0chn0; + i2c36 = &i2c15mux0chn1; + i2c37 = &i2c15mux0chn2; + i2c38 = &i2c15mux0chn3; + i2c39 = &i2c15mux1chn0; + i2c40 = &i2c15mux1chn1; + i2c41 = &i2c15mux1chn2; + i2c42 = &i2c15mux1chn3; + i2c43 = &i2c15mux2chn0; + i2c44 = &i2c15mux2chn1; + i2c45 = &i2c15mux2chn2; + i2c46 = &i2c15mux2chn3; + i2c47 = &i2c8mux0chn0; + i2c48 = &i2c8mux0chn1; serial4 = &uart5; @@ -231,20 +245,36 @@ gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>; }; }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc1 7>; + }; +}; + +&adc1 { + status = "okay"; + aspeed,int-vref-microvolt = <2500000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default + &pinctrl_adc10_default &pinctrl_adc11_default + &pinctrl_adc12_default &pinctrl_adc13_default + &pinctrl_adc14_default &pinctrl_adc15_default>; }; &gpio0 { gpio-line-names = /*A0-A7*/ "","","","","","","","", - /*B0-B7*/ "USERSPACE_RSTIND_BUFF","","","","","","","", + /*B0-B7*/ "USERSPACE_RSTIND_BUFF","","","","","","checkstop","", /*C0-C7*/ "","","","","","","","", /*D0-D7*/ "","","","","","","","", /*E0-E7*/ "","","","","","","","", /*F0-F7*/ "PIN_HOLE_RESET_IN_N","","", - "PIN_HOLE_RESET_OUT_N","","","","", + "PIN_HOLE_RESET_OUT_N","","", + "factory-reset-toggle","", /*G0-G7*/ "","","","","","","","", /*H0-H7*/ "led-rtc-battery","led-bmc","led-rear-enc-id0","led-rear-enc-fault0","","","","", - /*I0-I7*/ "","","","","","","","", + /*I0-I7*/ "","","","","","","bmc-secure-boot","", /*J0-J7*/ "","","","","","","","", /*K0-K7*/ "","","","","","","","", /*L0-L7*/ "","","","","","","","", @@ -252,7 +282,7 @@ /*N0-N7*/ "","","","","","","","", /*O0-O7*/ "","","","","","","","", /*P0-P7*/ "","","","","led-pcieslot-power","","","", - /*Q0-Q7*/ "","","","","","","","", + /*Q0-Q7*/ "","","regulator-standby-faulted","","","","","", /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","I2C_FLASH_MICRO_N","","", /*S0-S7*/ "","","","","","","","", /*T0-T7*/ "","","","","","","","", @@ -297,86 +327,6 @@ "presence-lcd-op", "presence-base-op", ""; - - gpio@0 { - reg = <0>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@1 { - reg = <1>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@2 { - reg = <2>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@3 { - reg = <3>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@4 { - reg = <4>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@5 { - reg = <5>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@6 { - reg = <6>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@7 { - reg = <7>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@8 { - reg = <8>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@9 { - reg = <9>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@10 { - reg = <10>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@11 { - reg = <11>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@12 { - reg = <12>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@13 { - reg = <13>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@14 { - reg = <14>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@15 { - reg = <15>; - type = <PCA955X_TYPE_GPIO>; - }; }; }; @@ -440,56 +390,6 @@ "expander-cable-card3", "expander-cable-card4", "expander-cable-card5"; - - gpio@0 { - reg = <0>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@1 { - reg = <1>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@2 { - reg = <2>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@3 { - reg = <3>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@4 { - reg = <4>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@5 { - reg = <5>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@6 { - reg = <6>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@7 { - reg = <7>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@8 { - reg = <8>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@9 { - reg = <9>; - type = <PCA955X_TYPE_GPIO>; - }; }; i2c-switch@70 { @@ -533,36 +433,6 @@ default-state = "keep"; type = <PCA955X_TYPE_LED>; }; - - gpio@2 { - reg = <2>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@3 { - reg = <3>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@4 { - reg = <4>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@5 { - reg = <5>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@6 { - reg = <6>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@7 { - reg = <7>; - type = <PCA955X_TYPE_GPIO>; - }; }; }; @@ -599,36 +469,6 @@ default-state = "keep"; type = <PCA955X_TYPE_LED>; }; - - gpio@2 { - reg = <2>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@3 { - reg = <3>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@4 { - reg = <4>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@5 { - reg = <5>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@6 { - reg = <6>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@7 { - reg = <7>; - type = <PCA955X_TYPE_GPIO>; - }; }; }; @@ -665,36 +505,6 @@ default-state = "keep"; type = <PCA955X_TYPE_LED>; }; - - gpio@2 { - reg = <2>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@3 { - reg = <3>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@4 { - reg = <4>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@5 { - reg = <5>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@6 { - reg = <6>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@7 { - reg = <7>; - type = <PCA955X_TYPE_GPIO>; - }; }; }; }; @@ -725,67 +535,6 @@ "expander-cable-card9", "expander-cable-card10", "expander-cable-card11"; - - gpio@0 { - reg = <0>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@1 { - reg = <1>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@2 { - reg = <2>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@3 { - reg = <3>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@4 { - reg = <4>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@5 { - reg = <5>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@6 { - reg = <6>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@7 { - reg = <7>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@8 { - reg = <8>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@9 { - reg = <9>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@10 { - reg = <10>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@11 { - reg = <11>; - type = <PCA955X_TYPE_GPIO>; - }; - }; i2c-switch@70 { @@ -829,36 +578,6 @@ default-state = "keep"; type = <PCA955X_TYPE_LED>; }; - - gpio@2 { - reg = <2>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@3 { - reg = <3>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@4 { - reg = <4>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@5 { - reg = <5>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@6 { - reg = <6>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@7 { - reg = <7>; - type = <PCA955X_TYPE_GPIO>; - }; }; }; @@ -895,36 +614,6 @@ default-state = "keep"; type = <PCA955X_TYPE_LED>; }; - - gpio@2 { - reg = <2>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@3 { - reg = <3>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@4 { - reg = <4>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@5 { - reg = <5>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@6 { - reg = <6>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@7 { - reg = <7>; - type = <PCA955X_TYPE_GPIO>; - }; }; }; @@ -961,36 +650,6 @@ default-state = "keep"; type = <PCA955X_TYPE_LED>; }; - - gpio@2 { - reg = <2>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@3 { - reg = <3>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@4 { - reg = <4>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@5 { - reg = <5>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@6 { - reg = <6>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@7 { - reg = <7>; - type = <PCA955X_TYPE_GPIO>; - }; }; }; @@ -1027,36 +686,6 @@ default-state = "keep"; type = <PCA955X_TYPE_LED>; }; - - gpio@2 { - reg = <2>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@3 { - reg = <3>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@4 { - reg = <4>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@5 { - reg = <5>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@6 { - reg = <6>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@7 { - reg = <7>; - type = <PCA955X_TYPE_GPIO>; - }; }; }; }; @@ -1106,36 +735,6 @@ default-state = "keep"; type = <PCA955X_TYPE_LED>; }; - - gpio@2 { - reg = <2>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@3 { - reg = <3>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@4 { - reg = <4>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@5 { - reg = <5>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@6 { - reg = <6>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@7 { - reg = <7>; - type = <PCA955X_TYPE_GPIO>; - }; }; }; @@ -1172,36 +771,6 @@ default-state = "keep"; type = <PCA955X_TYPE_LED>; }; - - gpio@2 { - reg = <2>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@3 { - reg = <3>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@4 { - reg = <4>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@5 { - reg = <5>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@6 { - reg = <6>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@7 { - reg = <7>; - type = <PCA955X_TYPE_GPIO>; - }; }; }; @@ -1238,36 +807,6 @@ default-state = "keep"; type = <PCA955X_TYPE_LED>; }; - - gpio@2 { - reg = <2>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@3 { - reg = <3>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@4 { - reg = <4>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@5 { - reg = <5>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@6 { - reg = <6>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@7 { - reg = <7>; - type = <PCA955X_TYPE_GPIO>; - }; }; }; @@ -1304,36 +843,6 @@ default-state = "keep"; type = <PCA955X_TYPE_LED>; }; - - gpio@2 { - reg = <2>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@3 { - reg = <3>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@4 { - reg = <4>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@5 { - reg = <5>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@6 { - reg = <6>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@7 { - reg = <7>; - type = <PCA955X_TYPE_GPIO>; - }; }; }; }; @@ -1347,11 +856,6 @@ gpio-controller; #gpio-cells = <2>; - gpio@0 { - reg = <0>; - type = <PCA955X_TYPE_GPIO>; - }; - led@1 { label = "pcieslot-c01"; reg = <1>; @@ -1439,26 +943,6 @@ default-state = "keep"; type = <PCA955X_TYPE_LED>; }; - - gpio@12 { - reg = <12>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@13 { - reg = <13>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@14 { - reg = <14>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@15 { - reg = <15>; - type = <PCA955X_TYPE_GPIO>; - }; }; }; @@ -2082,11 +1566,6 @@ type = <PCA955X_TYPE_LED>; }; - gpio@7 { - reg = <7>; - type = <PCA955X_TYPE_GPIO>; - }; - led@8 { label = "vrm4"; reg = <8>; @@ -2217,11 +1696,6 @@ type = <PCA955X_TYPE_LED>; }; - gpio@7 { - reg = <7>; - type = <PCA955X_TYPE_GPIO>; - }; - led@8 { label = "vrm0"; reg = <8>; @@ -2310,6 +1784,27 @@ compatible = "atmel,24c128"; reg = <0x50>; }; + + i2c-switch@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + i2c-mux-idle-disconnect; + + i2c8mux0chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c8mux0chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; }; &i2c9 { @@ -2413,15 +1908,21 @@ }; &i2c14 { + multi-master; status = "okay"; + ibm-panel@62 { + compatible = "ibm,op-panel"; + reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>; + }; + i2c-switch@70 { compatible = "nxp,pca9546"; reg = <0x70>; #address-cells = <1>; #size-cells = <0>; status = "okay"; - i2c-mux-idle-disconnect; + idle-state = <1>; i2c14mux0chn0: i2c@0 { #address-cells = <1>; @@ -2651,16 +2152,6 @@ default-state = "keep"; type = <PCA955X_TYPE_LED>; }; - - gpio@14 { - reg = <14>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@15 { - reg = <15>; - type = <PCA955X_TYPE_GPIO>; - }; }; pca0: pca9552@61 { @@ -2680,86 +2171,6 @@ "presence-fan2", "presence-fan1", "presence-fan0"; - - gpio@0 { - reg = <0>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@1 { - reg = <1>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@2 { - reg = <2>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@3 { - reg = <3>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@4 { - reg = <4>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@5 { - reg = <5>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@6 { - reg = <6>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@7 { - reg = <7>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@8 { - reg = <8>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@9 { - reg = <9>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@10 { - reg = <10>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@11 { - reg = <11>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@12 { - reg = <12>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@13 { - reg = <13>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@14 { - reg = <14>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@15 { - reg = <15>; - type = <PCA955X_TYPE_GPIO>; - }; }; }; }; @@ -2816,6 +2227,152 @@ &i2c15 { status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c15mux0chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c15mux0chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c15mux0chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c15mux0chn3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + }; + + i2c-switch@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c15mux1chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c15mux1chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c15mux1chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c15mux1chn3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + }; + + i2c-switch@72 { + compatible = "nxp,pca9546"; + reg = <0x72>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c15mux2chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c15mux2chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c15mux2chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c15mux2chn3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; }; &ehci1 { @@ -4050,11 +3607,6 @@ memory-region = <&flash_memory>; }; -&kcs4 { - compatible = "openbmc,mctp-lpc"; - status = "okay"; -}; - &mac2 { status = "okay"; pinctrl-names = "default"; @@ -4093,3 +3645,14 @@ status = "okay"; memory-region = <&vga_memory>; }; + +&kcs2 { + status = "okay"; + aspeed,lpc-io-reg = <0xca8 0xcac>; +}; + +&kcs3 { + status = "okay"; + aspeed,lpc-io-reg = <0xca2>; + aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts index 6419c9762c0b..866f32cdccea 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts @@ -82,7 +82,7 @@ chosen { stdout-path = &uart5; - bootargs = "console=ttyS4,115200n8"; + bootargs = "console=ttyS4,115200n8 earlycon"; }; memory@80000000 { @@ -116,34 +116,6 @@ }; }; - gpio-keys { - compatible = "gpio-keys"; - - ps0-presence { - label = "ps0-presence"; - gpios = <&gpio0 ASPEED_GPIO(S, 0) GPIO_ACTIVE_LOW>; - linux,code = <ASPEED_GPIO(S, 0)>; - }; - - ps1-presence { - label = "ps1-presence"; - gpios = <&gpio0 ASPEED_GPIO(S, 1) GPIO_ACTIVE_LOW>; - linux,code = <ASPEED_GPIO(S, 1)>; - }; - - ps2-presence { - label = "ps2-presence"; - gpios = <&gpio0 ASPEED_GPIO(S, 2) GPIO_ACTIVE_LOW>; - linux,code = <ASPEED_GPIO(S, 2)>; - }; - - ps3-presence { - label = "ps3-presence"; - gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_LOW>; - linux,code = <ASPEED_GPIO(S, 3)>; - }; - }; - i2c2mux: i2cmux { compatible = "i2c-mux-gpio"; #address-cells = <1>; @@ -246,6 +218,21 @@ linux,code = <11>; }; }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc1 7>; + }; +}; + +&adc1 { + status = "okay"; + aspeed,int-vref-microvolt = <2500000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default + &pinctrl_adc10_default &pinctrl_adc11_default + &pinctrl_adc12_default &pinctrl_adc13_default + &pinctrl_adc14_default &pinctrl_adc15_default>; }; &ehci1 { @@ -259,10 +246,10 @@ /*C0-C7*/ "","","","","","","","", /*D0-D7*/ "","","","","","","","", /*E0-E7*/ "","","","","","","","", - /*F0-F7*/ "","","","","","","","", + /*F0-F7*/ "","","","","","","factory-reset-toggle","", /*G0-G7*/ "","","","","","","","", /*H0-H7*/ "","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","", - /*I0-I7*/ "","","","","","","","", + /*I0-I7*/ "","","","","","","bmc-secure-boot","", /*J0-J7*/ "","","","","","","","", /*K0-K7*/ "","","","","","","","", /*L0-L7*/ "","","","","","","","", @@ -270,7 +257,7 @@ /*N0-N7*/ "","","","","","","","", /*O0-O7*/ "","","","usb-power","","","","", /*P0-P7*/ "","","","","pcieslot-power","","","", - /*Q0-Q7*/ "cfam-reset","","","","","","","", + /*Q0-Q7*/ "cfam-reset","","regulator-standby-faulted","","","","","", /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","", /*S0-S7*/ "presence-ps0","presence-ps1","presence-ps2","presence-ps3", "","","","", @@ -282,13 +269,6 @@ /*Y0-Y7*/ "","","","","","","","", /*Z0-Z7*/ "","","","","","","",""; - pin_mclr_vpp { - gpio-hog; - gpios = <ASPEED_GPIO(P, 7) GPIO_OPEN_DRAIN>; - output-high; - line-name = "mclr_vpp"; - }; - i2c3_mux_oe_n { gpio-hog; gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>; @@ -945,46 +925,6 @@ "DASD_BP2_PRESENT_N", "DASD_BP1_PRESENT_N", "DASD_BP0_PRESENT_N"; - - gpio@0 { - reg = <0>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@1 { - reg = <1>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@2 { - reg = <2>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@3 { - reg = <3>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@4 { - reg = <4>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@5 { - reg = <5>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@6 { - reg = <6>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@7 { - reg = <7>; - type = <PCA955X_TYPE_GPIO>; - }; }; }; @@ -1025,86 +965,6 @@ "SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N", "SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N", "", "", "", "", "", ""; - - gpio@0 { - reg = <0>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@1 { - reg = <1>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@2 { - reg = <2>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@3 { - reg = <3>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@4 { - reg = <4>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@5 { - reg = <5>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@6 { - reg = <6>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@7 { - reg = <7>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@8 { - reg = <8>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@9 { - reg = <9>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@10 { - reg = <10>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@11 { - reg = <11>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@12 { - reg = <12>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@13 { - reg = <13>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@14 { - reg = <14>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@15 { - reg = <15>; - type = <PCA955X_TYPE_GPIO>; - }; }; }; @@ -1126,6 +986,32 @@ reg = <0x4a>; }; + pca9551@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "cablecard0-cxp-top"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "cablecard0-cxp-bot"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + }; + pca9546@70 { compatible = "nxp,pca9546"; reg = <0x70>; @@ -1182,6 +1068,58 @@ reg = <0x49>; }; + pca9551@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "cablecard3-cxp-top"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "cablecard3-cxp-bot"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + }; + + pca9551@61 { + compatible = "nxp,pca9551"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "cablecard4-cxp-top"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "cablecard4-cxp-bot"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + }; + pca9546@70 { compatible = "nxp,pca9546"; reg = <0x70>; @@ -1290,6 +1228,486 @@ multi-master; status = "okay"; + pca9552@30 { + compatible = "ibm,pca9552"; + reg = <0x30>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "pcieslot0"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "pcieslot1"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + label = "pcieslot2"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + label = "pcieslot3"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + label = "pcieslot4"; + reg = <4>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + label = "cpu1"; + reg = <5>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + label = "cpu-vrm1"; + reg = <6>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + label = "lcd-russel"; + reg = <8>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + }; + + pca9552@31 { + compatible = "ibm,pca9552"; + reg = <0x31>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "ddimm0"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "ddimm1"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + label = "ddimm2"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + label = "ddimm3"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + label = "ddimm4"; + reg = <4>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + label = "ddimm5"; + reg = <5>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + label = "ddimm6"; + reg = <6>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + label = "ddimm7"; + reg = <7>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + label = "ddimm8"; + reg = <8>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + label = "ddimm9"; + reg = <9>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@10 { + label = "ddimm10"; + reg = <10>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@11 { + label = "ddimm11"; + reg = <11>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@12 { + label = "ddimm12"; + reg = <12>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@13 { + label = "ddimm13"; + reg = <13>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@14 { + label = "ddimm14"; + reg = <14>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@15 { + label = "ddimm15"; + reg = <15>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + }; + + pca9552@32 { + compatible = "ibm,pca9552"; + reg = <0x32>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "ddimm16"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "ddimm17"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + label = "ddimm18"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + label = "ddimm19"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + label = "ddimm20"; + reg = <4>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + label = "ddimm21"; + reg = <5>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + label = "ddimm22"; + reg = <6>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + label = "ddimm23"; + reg = <7>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + label = "ddimm24"; + reg = <8>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + label = "ddimm25"; + reg = <9>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@10 { + label = "ddimm26"; + reg = <10>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@11 { + label = "ddimm27"; + reg = <11>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@12 { + label = "ddimm28"; + reg = <12>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@13 { + label = "ddimm29"; + reg = <13>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@14 { + label = "ddimm30"; + reg = <14>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@15 { + label = "ddimm31"; + reg = <15>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + }; + + pca9552@33 { + compatible = "ibm,pca9552"; + reg = <0x33>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "planar"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "cpu0"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + label = "dasd-pyramid0"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + label = "dasd-pyramid1"; + reg = <4>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + label = "dasd-pyramid2"; + reg = <5>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + label = "cpu0-vrm0"; + reg = <6>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + label = "rtc-battery"; + reg = <7>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@8 { + label = "base-blyth"; + reg = <8>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@9 { + label = "pcieslot6"; + reg = <9>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@10 { + label = "pcieslot7"; + reg = <10>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@11 { + label = "pcieslot8"; + reg = <11>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@12 { + label = "pcieslot9"; + reg = <12>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@13 { + label = "pcieslot10"; + reg = <13>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@14 { + label = "pcieslot11"; + reg = <14>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@15 { + label = "tpm-wilson"; + reg = <15>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + }; + si7021-a20@40 { compatible = "silabs,si7020"; reg = <0x40>; @@ -1343,93 +1761,103 @@ }; }; - pca0: pca9552@61 { - compatible = "nxp,pca9552"; - reg = <0x61>; + pca9551@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; #address-cells = <1>; #size-cells = <0>; gpio-controller; #gpio-cells = <2>; - gpio@0 { + led@0 { + label = "front-sys-id0"; reg = <0>; - type = <PCA955X_TYPE_GPIO>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; }; - gpio@1 { + led@1 { + label = "front-check-log0"; reg = <1>; - type = <PCA955X_TYPE_GPIO>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; }; - gpio@2 { + led@2 { + label = "front-enc-fault1"; reg = <2>; - type = <PCA955X_TYPE_GPIO>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; }; - gpio@3 { + led@3 { + label = "front-sys-pwron0"; reg = <3>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@4 { - reg = <4>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@5 { - reg = <5>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@6 { - reg = <6>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@7 { - reg = <7>; - type = <PCA955X_TYPE_GPIO>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; }; + }; - gpio@8 { - reg = <8>; - type = <PCA955X_TYPE_GPIO>; - }; + pca0: pca9552@61 { + compatible = "nxp,pca9552"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; - gpio@9 { - reg = <9>; - type = <PCA955X_TYPE_GPIO>; - }; + gpio-controller; + #gpio-cells = <2>; - gpio@10 { - reg = <10>; - type = <PCA955X_TYPE_GPIO>; + led@0 { + label = "fan0"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; }; - gpio@11 { - reg = <11>; - type = <PCA955X_TYPE_GPIO>; + led@1 { + label = "fan1"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; }; - gpio@12 { - reg = <12>; - type = <PCA955X_TYPE_GPIO>; + led@2 { + label = "fan2"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; }; - gpio@13 { - reg = <13>; - type = <PCA955X_TYPE_GPIO>; + led@3 { + label = "fan3"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; }; - gpio@14 { - reg = <14>; - type = <PCA955X_TYPE_GPIO>; + led@4 { + label = "fan4"; + reg = <4>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; }; - gpio@15 { - reg = <15>; - type = <PCA955X_TYPE_GPIO>; + led@5 { + label = "fan5"; + reg = <5>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; }; }; @@ -1488,6 +1916,19 @@ reg = <0x51>; }; + pca_pres3: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "power-config-full-load", ""; + }; + pca_pres2: pca9552@61 { compatible = "nxp,pca9552"; reg = <0x61>; @@ -1504,86 +1945,6 @@ "SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N", "SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N", "", "", "", ""; - - gpio@0 { - reg = <0>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@1 { - reg = <1>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@2 { - reg = <2>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@3 { - reg = <3>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@4 { - reg = <4>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@5 { - reg = <5>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@6 { - reg = <6>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@7 { - reg = <7>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@8 { - reg = <8>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@9 { - reg = <9>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@10 { - reg = <10>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@11 { - reg = <11>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@12 { - reg = <12>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@13 { - reg = <13>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@14 { - reg = <14>; - type = <PCA955X_TYPE_GPIO>; - }; - - gpio@15 { - reg = <15>; - type = <PCA955X_TYPE_GPIO>; - }; }; }; @@ -1639,6 +2000,32 @@ reg = <0x49>; }; + pca9551@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "cablecard10-cxp-top"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "cablecard10-cxp-bot"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + }; + pca9546@70 { compatible = "nxp,pca9546"; reg = <0x70>; @@ -1673,6 +2060,11 @@ &i2c12 { status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; }; &i2c13 { @@ -1682,6 +2074,80 @@ compatible = "atmel,24c64"; reg = <0x50>; }; + + pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "nvme0"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "nvme1"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + label = "nvme2"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + label = "nvme3"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + label = "nvme4"; + reg = <4>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + label = "nvme5"; + reg = <5>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + label = "nvme6"; + reg = <6>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + label = "nvme7"; + reg = <7>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + }; }; &i2c14 { @@ -1691,6 +2157,80 @@ compatible = "atmel,24c64"; reg = <0x50>; }; + + pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "nvme8"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "nvme9"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + label = "nvme10"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + label = "nvme11"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + label = "nvme12"; + reg = <4>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + label = "nvme13"; + reg = <5>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + label = "nvme14"; + reg = <6>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + label = "nvme15"; + reg = <7>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + }; }; &i2c15 { @@ -1700,6 +2240,80 @@ compatible = "atmel,24c64"; reg = <0x50>; }; + + pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "nvme16"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@1 { + label = "nvme17"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@2 { + label = "nvme18"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@3 { + label = "nvme19"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@4 { + label = "nvme20"; + reg = <4>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@5 { + label = "nvme21"; + reg = <5>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@6 { + label = "nvme22"; + reg = <6>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + + led@7 { + label = "nvme23"; + reg = <7>; + retain-state-shutdown; + default-state = "keep"; + type = <PCA955X_TYPE_LED>; + }; + }; }; &vuart1 { @@ -1777,3 +2391,14 @@ status = "okay"; memory-region = <&vga_memory>; }; + +&kcs2 { + status = "okay"; + aspeed,lpc-io-reg = <0xca8 0xcac>; +}; + +&kcs3 { + status = "okay"; + aspeed,lpc-io-reg = <0xca2>; + aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts index 1752f3250e44..60a39ea10ab1 100644 --- a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts +++ b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts @@ -3,6 +3,7 @@ #include "aspeed-g5.dtsi" #include <dt-bindings/gpio/aspeed-gpio.h> #include <dt-bindings/leds/leds-pca955x.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "FP5280G2 BMC"; @@ -245,7 +246,7 @@ label = "bmc"; m25p,fast-read; spi-max-frequency = <50000000>; -#include "openbmc-flash-layout.dtsi" +#include "openbmc-flash-layout-64.dtsi" }; }; @@ -902,4 +903,10 @@ }; +&kcs3 { + status = "okay"; + aspeed,lpc-io-reg = <0xca2>; + aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>; +}; + #include "ibm-power9-dual.dtsi" diff --git a/arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts b/arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts new file mode 100644 index 000000000000..caf66651e5b5 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts @@ -0,0 +1,328 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2021 Inventec Corp. + +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include "aspeed-g6-pinctrl.dtsi" +#include <dt-bindings/i2c/i2c.h> +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "TRANSFORMERS BMC"; + compatible = "inventec,transformer-bmc", "aspeed,ast2600"; + + aliases { + serial4 = &uart5; + }; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + leds { + compatible = "gpio-leds"; + + // UID led + uid { + label = "UID_LED"; + gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>; + }; + + // Heart beat led + heartbeat { + label = "HB_LED"; + gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>; + }; + }; +}; + +&mdio0 { + status = "okay"; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&mac3 { + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <ðphy0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii4_default>; +}; + +&fmc { + status = "okay"; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <33000000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; +#include "openbmc-flash-layout.dtsi" + }; + + flash@1 { + status = "okay"; + m25p,fast-read; + label = "bmc2"; + spi-max-frequency = <33000000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bios"; + spi-max-frequency = <33000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + }; +}; + +&wdt1 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + //Set bmc' slave address; + bmc_slave@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + i2c-protocol; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + // FRU AT24C512C-SSHM-T + status = "okay"; + eeprom@50 { + compatible = "atmel,24c512"; + reg = <0x50>; + pagesize = <128>; + }; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; + + tmp75@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + + tmp75@4f { + compatible = "ti,tmp75"; + reg = <0x4f>; + }; + + tmp468@48 { + compatible = "ti,tmp468"; + reg = <0x48>; + }; +}; + +&i2c7 { + status = "okay"; + adm1278@40 { + compatible = "adi,adm1278"; + reg = <0x40>; + }; +}; + + +&i2c8 { + // FRU AT24C512C-SSHM-T + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c512"; + reg = <0x51>; + pagesize = <128>; + }; + + eeprom@53 { + compatible = "atmel,24c512"; + reg = <0x53>; + pagesize = <128>; + }; +}; + +&i2c9 { + // M.2 + status = "okay"; +}; + +&i2c10 { + // I2C EXPANDER + status = "okay"; + + i2c-switch@71 { + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + }; + + i2c-switch@73 { + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + }; +}; + +&i2c11 { + // I2C EXPANDER + status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + + pcie_eeprom_riser1: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@55 { + compatible = "atmel,24c512"; + reg = <0x55>; + pagesize = <128>; + }; + }; + + pcie_eeprom_riser2: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + eeprom@55 { + compatible = "atmel,24c512"; + reg = <0x55>; + pagesize = <128>; + }; + }; + + pcie_eeprom_riser3: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + eeprom@55 { + compatible = "atmel,24c512"; + reg = <0x55>; + pagesize = <128>; + }; + }; + }; +}; + +&i2c12 { + status = "okay"; + + psu0:psu0@58 { + compatible = "pmbus"; + reg = <0x58>; + }; +}; + +&gpio0 { + status = "okay"; + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "presence-ps0","power-chassis-good","","","","","presence-ps1","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","","","","power-chassis-control","","","", + /*G0-G7*/ "","","jtag-mux","","","","","", + /*H0-H7*/ "","","","","reset-button","power-button","","", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "","","","tck-mux","","","","", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","","","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","nmi-button","","","","","","", + /*V0-V7*/ "","","","","power-config-full-load","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","","", + /*AA0-AA7*/ "","","","","","","","", + /*AB0-AB7*/ "","","","","","","","", + /*AC0-AC7*/ "","","","","","","",""; +}; + +&lpc_snoop { + status = "okay"; + snoop-ports = <0x80>; +}; + +&emmc_controller { + status = "okay"; +}; + +&emmc { + status = "okay"; + non-removable; + max-frequency = <52000000>; + bus-width = <8>; +}; + +&vhub { + status = "okay"; + aspeed,vhub-downstream-ports = <7>; + aspeed,vhub-generic-endpoints = <21>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2ad_default>; +}; + +&rtc { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts new file mode 100644 index 000000000000..68f332ee1886 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts @@ -0,0 +1,488 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Tyan S7106 BMC"; + compatible = "tyan,s7106-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlycon"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + p2a_memory: region@987f0000 { + no-map; + reg = <0x987f0000 0x00010000>; /* 64KB */ + }; + + vga_memory: framebuffer@9f000000 { + no-map; + reg = <0x9f000000 0x01000000>; /* 16M */ + }; + + gfx_memory: framebuffer { + size = <0x01000000>; /* 16M */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + leds { + compatible = "gpio-leds"; + + identify { + gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>; + }; + + heartbeat { + gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, + <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>, + <&adc 12>, <&adc 13>, <&adc 14>; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 15>; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + label = "bmc"; + status = "okay"; + m25p,fast-read; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + label = "pnor"; + m25p,fast-read; + }; +}; + +&uart1 { + /* Rear RS-232 connector */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default>; +}; + +&uart2 { + /* RS-232 connector on header */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default + &pinctrl_rxd2_default>; +}; + +&uart3 { + /* Alternative to vuart to internally connect (route) to uart1 + * when vuart cannot be used due to BIOS limitations. + */ + status = "okay"; +}; + +&uart4 { + /* Alternative to vuart to internally connect (route) to the + * external port usually used by uart1 when vuart cannot be + * used due to BIOS limitations. + */ + status = "okay"; +}; + +&uart5 { + /* BMC "debug" (console) UART; connected to RS-232 connector + * on header; selectable via jumpers as alternative to uart2 + */ + status = "okay"; +}; + +&vuart { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; +}; + +&p2a { + status = "okay"; + memory-region = <&p2a_memory>; +}; + +&lpc_snoop { + status = "okay"; + snoop-ports = <0x80>; +}; + +&adc { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default + &pinctrl_pwm1_default + &pinctrl_pwm3_default + &pinctrl_pwm4_default>; + + /* CPU fan #0 */ + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + /* CPU fan #1 */ + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; + + /* PWM group for chassis fans #1, #2, #3 and #4 */ + fan@2 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; + }; + + fan@3 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x03>; + }; + + fan@4 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x04>; + }; + + fan@5 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x05>; + }; + + /* PWM group for chassis fans #5 and #6 */ + fan@6 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x06>; + }; + + fan@7 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x07>; + }; +}; + +&i2c0 { + status = "okay"; + + /* Hardware monitor with temperature sensors */ + nct7802@28 { + compatible = "nuvoton,nct7802"; + reg = <0x28>; + }; + + /* Also connected to: + * - IPMB pin header + * - CPU #0 memory error LED @ 0x3A + * - CPU #1 memory error LED @ 0x3C + */ +}; + +&i2c1 { + /* Directly connected to PCH SMBUS #0 */ + status = "okay"; +}; + +&i2c2 { + status = "okay"; + + /* BMC EEPROM, incl. mainboard FRU */ + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + }; + + /* Also connected to: + * - fan header + * - mini-SAS HD connector + * - SSATA SGPIO + * - via switch (BMC_SMB3_PCH_IE_SML3_EN, active low) + * to PCH SMBUS #3 + */ +}; + +&i2c3 { + status = "okay"; + + /* PSU1 FRU @ 0xA0 */ + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + + /* PSU2 FRU @ 0xA2 */ + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + }; + + /* PSU1 @ 0xB0 */ + power-supply@58 { + compatible = "pmbus"; + reg = <0x58>; + }; + + /* PSU2 @ 0xB2 */ + power-supply@59 { + compatible = "pmbus"; + reg = <0x59>; + }; + + /* Also connected to: + * - PCH SMBUS #1 + */ +}; + +&i2c4 { + status = "okay"; + + /* Connected to: + * - PCH SMBUS #2 + */ + + /* Connected via switch to: + * - CPU #0 channels ABC VDDQ @ 0x80 + * - CPU #0 channels DEF VDDQ @ 0x81 + * - CPU #1 channels ABC VDDQ @ 0x82 + * - CPU #1 channels DEF VDDQ @ 0x83 + * - CPU #0 VCCIO & VMCP @ 0x52 + * - CPU #1 VCCIO & VMCP @ 0x53 + * - CPU #0 VCCIN @ 0xC0 + * - CPU #0 VSA @ 0xC2 + * - CPU #1 VCCIN @ 0xC4 + * - CPU #1 VSA @ 0xC6 + * - J110 + */ +}; + +&i2c5 { + status = "okay"; + + /* Connected via switch (PCH_BMC_SMB_SW_P) to: + * - mainboard FRU @ 0xAE + * - XDP connector + * - ME debug header + * - clock buffer @ 0xD8 + * - i2c4 via switch (PCH_VR_SMBUS_SW_P; controlled by PCH) + * - PCH SMBUS + */ +}; + +&i2c6 { + status = "okay"; + + /* Connected via switch (BMC_PE_SMB_EN_1_N) to + * bus mux (selector BMC_PE_SMB_SW_BIT[1..0]) to: + * - 0,0: PCIE slot 1, SMB #1 + * - 0,1: PCIE slot 1, SMB #2 + * - 1,0: PCIE slot 2, SMB #1 + * - 1,1: PCIE slot 2, SMB #2 + */ + + /* Connected via switch (BMC_PE_SMB_EN_2_N) to + * bus mux (selector BMC_PE_SMB_SW_BIT[1..0]) to: + * - 0,0: OCP0 (A) SMB + * - 0,1: OCP0 (C) SMB + * - 1,0: OCP1 (A) SMB + * - 1,1: NC + */ +}; + +&i2c7 { + status = "okay"; + + /* Connected to: + * - PCH SMBUS #4 + */ +}; + +&i2c8 { + status = "okay"; + + /* Not connected */ +}; + +&mac0 { + status = "okay"; + use-ncsi; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; +}; + +&mac1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&ibt { + status = "okay"; +}; + +&kcs1 { + status = "okay"; + aspeed,lpc-io-reg = <0xca8>; +}; + +&kcs3 { + status = "okay"; + aspeed,lpc-io-reg = <0xca2>; +}; + +/* Enable BMC VGA output to show an early (pre-BIOS) boot screen */ +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +/* We're following the GPIO naming as defined at + * https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md. + * + * Notes on led-identify and id-button: + * - A physical button is connected to id-button which + * triggers the clock on a D flip-flop. The /Q output of the + * flip-flop drives its D input. + * - The flip-flop's Q output drives led-identify which is + * connected to LEDs. + * - With that, every button press toggles the LED between on and off. + * + * Notes on power-, reset- and nmi- button and control: + * - The -button signals can be used to monitor physical buttons. + * - The -control signals can be used to actuate the specific + * operation. + * - In hardware, the -button signals are connected to the -control + * signals through drivers with the -control signals being + * protected through diodes. + */ +&gpio { + status = "okay"; + gpio-line-names = + /*A0*/ "", + /*A1*/ "", + /*A2*/ "led-identify", /* in/out: BMC_IDLED_ON_N */ + /*A3*/ "", + /*A4*/ "", + /*A5*/ "", + /*A6*/ "", + /*A7*/ "", + /*B0-B7*/ "","","","","","","","", + /*C0*/ "", + /*C1*/ "", + /*C2*/ "", + /*C3*/ "", + /*C4*/ "id-button", /* in/out: BMC_IDBTN_IN_OUT_N */ + /*C5*/ "post-complete", /* in: FM_BIOS_POST_CMPLT_N */ + /*C6*/ "", + /*C7*/ "", + /*D0*/ "", + /*D1*/ "", + /*D2*/ "power-chassis-good", /* in: SYS_PWROK_BUF */ + /*D3*/ "platform-reset", /* in: SYS_PLTRST_N */ + /*D4*/ "", + /*D5*/ "", + /*D6*/ "", + /*D7*/ "", + /*E0*/ "power-button", /* in: BMC_PWBTN_IN_N */ + /*E1*/ "power-chassis-control", /* out: BMC_PWRBTN_OUT_N */ + /*E2*/ "reset-button", /* in: BMC_RSTBTN_IN_N */ + /*E3*/ "reset-control", /* out: BMC_RSTBTN_OUT_N */ + /*E4*/ "nmi-button", /* in: BMC_NMIBTN_IN_N */ + /*E5*/ "nmi-control", /* out: BMC_NMIBTN_OUT_N */ + /*E6*/ "", + /*E7*/ "led-heartbeat", /* out: BMC_HEARTBRAT_LED_N */ + /*F0*/ "", + /*F1*/ "clear-cmos-control", /* out: BMC_CLR_CMOS_N */ + /*F2*/ "", + /*F3*/ "", + /*F4*/ "led-fault", /* out: AST_HW_FAULT_N */ + /*F5*/ "", + /*F6*/ "", + /*F7*/ "", + /*G0*/ "BMC_PE_SMB_EN_1_N", /* out */ + /*G1*/ "BMC_PE_SMB_EN_2_N", /* out */ + /*G2*/ "", + /*G3*/ "", + /*G4*/ "", + /*G5*/ "", + /*G6*/ "", + /*G7*/ "", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "","","","","","","","", + /*Q0*/ "", + /*Q1*/ "", + /*Q2*/ "", + /*Q3*/ "", + /*Q4*/ "BMC_PE_SMB_SW_BIT0", /* out */ + /*Q5*/ "BMC_PE_SMB_SW_BIT1", /* out */ + /*Q6*/ "", + /*Q7*/ "", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","","","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","","", + /*AA0*/ "", + /*AA1*/ "", + /*AA2*/ "", + /*AA3*/ "BMC_SMB3_PCH_IE_SML3_EN", /* out */ + /*AA4*/ "", + /*AA5*/ "", + /*AA6*/ "", + /*AA7*/ "", + /*AB0-AB7*/ "","","","","","","",""; +}; diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index c5aeb3cf3a09..b313a1cf5f73 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -383,6 +383,12 @@ interrupts = <8>; status = "disabled"; }; + + uart_routing: uart-routing@9c { + compatible = "aspeed,ast2400-uart-routing"; + reg = <0x9c 0x4>; + status = "disabled"; + }; }; uart2: serial@1e78d000 { diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index 73ca1ec6fc24..c7049454c7cb 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -491,6 +491,12 @@ #reset-cells = <1>; }; + uart_routing: uart-routing@9c { + compatible = "aspeed,ast2500-uart-routing"; + reg = <0x9c 0x4>; + status = "disabled"; + }; + lhc: lhc@a0 { compatible = "aspeed,ast2500-lhc"; reg = <0xa0 0x24 0xc8 0x8>; diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index 1b47be1704f8..5106a424f1ce 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -364,6 +364,26 @@ status = "disabled"; }; + adc0: adc@1e6e9000 { + compatible = "aspeed,ast2600-adc0"; + reg = <0x1e6e9000 0x100>; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_ADC>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + status = "disabled"; + }; + + adc1: adc@1e6e9100 { + compatible = "aspeed,ast2600-adc1"; + reg = <0x1e6e9100 0x100>; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_ADC>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + status = "disabled"; + }; + gpio0: gpio@1e780000 { #gpio-cells = <2>; gpio-controller; @@ -551,6 +571,12 @@ #reset-cells = <1>; }; + uart_routing: uart-routing@98 { + compatible = "aspeed,ast2600-uart-routing"; + reg = <0x98 0x8>; + status = "disabled"; + }; + ibt: ibt@140 { compatible = "aspeed,ast2600-ibt-bmc"; reg = <0x140 0x18>; diff --git a/arch/arm/boot/dts/at91-lmu5000.dts b/arch/arm/boot/dts/at91-lmu5000.dts new file mode 100644 index 000000000000..f8863d7c0798 --- /dev/null +++ b/arch/arm/boot/dts/at91-lmu5000.dts @@ -0,0 +1,147 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Device Tree file for CalAmp LMU5000 board + * + * Copyright (C) 2013 Adam Porter <porter.adam@gmail.com> + */ + +/dts-v1/; +#include "at91sam9g20.dtsi" + +/ { + model = "CalAmp LMU5000"; + compatible = "calamp,lmu5000", "atmel,at91sam9g20", "atmel,at91sam9"; + + chosen { + bootargs = "mem=64M console=ttyS0,115200 rootfstype=jffs2"; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <18432000>; + }; + }; +}; + +&dbgu { + status = "okay"; +}; + +&ebi { + status = "okay"; + + nand_controller: nand-controller { + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; + status = "okay"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + status = "okay"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + kernel@0 { + label = "kernel"; + reg = <0x0 0x400000>; + }; + + rootfs@400000 { + label = "rootfs"; + reg = <0x400000 0x3C00000>; + }; + + user1@4000000 { + label = "user1"; + reg = <0x4000000 0x2000000>; + }; + + user2@6000000 { + label = "user2"; + reg = <0x6000000 0x2000000>; + }; + }; + }; + }; +}; + +&macb0 { + phy-mode = "mii"; + status = "okay"; +}; + +&pinctrl { + board { + pinctrl_pck0_as_mck: pck0_as_mck { + atmel,pins = <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + usb0 { + pinctrl_usb1_vbus_gpio: usb0_vbus_gpio { + atmel,pins = <AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + }; +}; + +&ssc0 { + status = "okay"; + pinctrl-0 = <&pinctrl_ssc0_tx>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usart0 { + pinctrl-0 = + <&pinctrl_usart0 + &pinctrl_usart0_rts + &pinctrl_usart0_cts + &pinctrl_usart0_dtr_dsr + &pinctrl_usart0_dcd + &pinctrl_usart0_ri>; + status = "okay"; +}; + +&usart2 { + status = "okay"; +}; + +&usb0 { + num-ports = <2>; + status = "okay"; +}; + +&usb1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_vbus_gpio>; + atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/at91-q5xr5.dts b/arch/arm/boot/dts/at91-q5xr5.dts new file mode 100644 index 000000000000..5827383b181b --- /dev/null +++ b/arch/arm/boot/dts/at91-q5xr5.dts @@ -0,0 +1,199 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Device Tree file for Exegin Q5xR5 board + * + * Copyright (C) 2014 Owen Kirby <osk@exegin.com> + */ + +/dts-v1/; +#include "at91sam9g20.dtsi" + +/ { + model = "Exegin Q5x (rev5)"; + compatible = "exegin,q5xr5", "atmel,at91sam9g20", "atmel,at91sam9"; + + chosen { + bootargs = "console=ttyS0,115200 rootfstype=squashfs,jffs2"; + }; + + memory { + reg = <0x20000000 0x0>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <18432000>; + }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <18432000>; + }; + }; +}; + +&dbgu { + status = "okay"; +}; + +&ebi { + status = "okay"; + + flash: flash@0 { + compatible = "cfi-flash"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0 0x1000000 0x800000>; + bank-width = <2>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + kernel@0 { + label = "kernel"; + reg = <0x0 0x200000>; + }; + + rootfs@200000 { + label = "rootfs"; + reg = <0x200000 0x600000>; + }; + }; + }; +}; + +&macb0 { + phy-mode = "mii"; + status = "okay"; +}; + +&pinctrl { + board { + pinctrl_pck0_as_mck: pck0_as_mck { + atmel,pins = <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + spi0 { + pinctrl_spi0: spi0-0 { + atmel,pins = + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_spi0_npcs0: spi0_npcs0 { + atmel,pins = <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_spi0_npcs1: spi0_npcs1 { + atmel,pins = <AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + + spi1 { + pinctrl_spi1: spi1-0 { + atmel,pins = + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_spi1_npcs0: spi1_npcs0 { + atmel,pins = <AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_spi1_npcs1: spi1_npcs1 { + atmel,pins = <AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0 &pinctrl_spi0_npcs0 &pinctrl_spi0_npcs1>; + cs-gpios = <&pioA 3 GPIO_ACTIVE_HIGH>, <&pioC 11 GPIO_ACTIVE_LOW>, <0>, <0>; + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <20000000>; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + + at91boot@0 { + label = "at91boot"; + reg = <0x0 0x4000>; + }; + + uenv@4000 { + label = "uboot-env"; + reg = <0x4000 0x4000>; + }; + + uboot@8000 { + label = "uboot"; + reg = <0x8000 0x3E000>; + }; + }; + + spidev@1 { + compatible = "spidev"; + spi-max-frequency = <2000000>; + reg = <1>; + }; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1 &pinctrl_spi1_npcs0 &pinctrl_spi1_npcs1>; + cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>, <&pioC 5 GPIO_ACTIVE_LOW>, <0>, <0>; + status = "okay"; + + spidev@0 { + compatible = "spidev"; + spi-max-frequency = <2000000>; + reg = <0>; + }; + + spidev@1 { + compatible = "spidev"; + spi-max-frequency = <2000000>; + reg = <1>; + }; +}; + +&usart0 { + pinctrl-0 = + <&pinctrl_usart0 + &pinctrl_usart0_rts + &pinctrl_usart0_cts + &pinctrl_usart0_dtr_dsr + &pinctrl_usart0_dcd + &pinctrl_usart0_ri>; + status = "okay"; +}; + +&usb0 { + num-ports = <2>; + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi index b48ac3b62a31..a4623cc67cc1 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi @@ -8,6 +8,7 @@ */ #include "sama5d2.dtsi" #include "sama5d2-pinfunc.h" +#include <dt-bindings/gpio/gpio.h> / { model = "Atmel SAMA5D27 SoM1"; @@ -95,8 +96,11 @@ i2c0: i2c@f8028000 { dmas = <0>, <0>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c0_default>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; at24@50 { @@ -113,6 +117,12 @@ bias-disable; }; + pinctrl_i2c0_gpio: i2c0_gpio { + pinmux = <PIN_PD21__GPIO>, + <PIN_PD22__GPIO>; + bias-disable; + }; + pinctrl_qspi1_default: qspi1_default { sck_cs { pinmux = <PIN_PB5__QSPI1_SCK>, diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts index cd4672501add..08f0d4b995ff 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts @@ -130,8 +130,11 @@ i2c-analog-filter; i2c-digital-filter; i2c-digital-filter-width-ns = <35>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_mikrobus_i2c>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + sda-gpios = <&pioA PIN_PA24 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PA23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; }; }; @@ -215,8 +218,11 @@ i2c-analog-filter; i2c-digital-filter; i2c-digital-filter-width-ns = <35>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; }; @@ -252,6 +258,13 @@ bias-disable; }; + pinctrl_i2c1_gpio: i2c1_gpio { + pinmux = <PIN_PD4__GPIO>, + <PIN_PD5__GPIO>; + bias-disable; + }; + + pinctrl_isc_base: isc_base { pinmux = <PIN_PC21__ISC_PCK>, <PIN_PC22__ISC_VSYNC>, @@ -441,6 +454,12 @@ bias-disable; }; + pinctrl_i2c3_gpio: i2c3_gpio { + pinmux = <PIN_PA24__GPIO>, + <PIN_PA23__GPIO>; + bias-disable; + }; + pinctrl_flx4_default: flx4_uart_default { pinmux = <PIN_PC28__FLEXCOM4_IO0>, <PIN_PC29__FLEXCOM4_IO1>, diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi index 025a78310e3a..21c86171e462 100644 --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi @@ -30,6 +30,14 @@ clock-frequency = <24000000>; }; }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-wilc1000"; + reset-gpios = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&pioA PIN_PA29 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pinctrl_wilc_pwrseq>; + pinctrl-names = "default"; + }; }; &flx1 { @@ -310,5 +318,67 @@ <PIN_PB10__QSPI1_IO3>; bias-pull-up; }; + + pinctrl_sdmmc1_default: sdmmc1_default { + cmd-data { + pinmux = <PIN_PA28__SDMMC1_CMD>, + <PIN_PA18__SDMMC1_DAT0>, + <PIN_PA19__SDMMC1_DAT1>, + <PIN_PA20__SDMMC1_DAT2>, + <PIN_PA21__SDMMC1_DAT3>; + bias-disable; + }; + + conf-ck { + pinmux = <PIN_PA22__SDMMC1_CK>; + bias-disable; + }; + }; + + pinctrl_wilc_default: wilc_default { + conf-irq { + pinmux = <PIN_PB25__GPIO>; + bias-disable; + }; + }; + + pinctrl_wilc_pwrseq: wilc_pwrseq { + conf-ce-nrst { + pinmux = <PIN_PA27__GPIO>, + <PIN_PA29__GPIO>; + bias-disable; + }; + + conf-rtcclk { + pinmux = <PIN_PB13__PCK1>; + bias-disable; + }; + }; +}; + +&sdmmc1 { + #address-cells = <1>; + #size-cells = <0>; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc1_default>; + mmc-pwrseq = <&wifi_pwrseq>; + no-1-8-v; + non-removable; + bus-width = <4>; + status = "okay"; + + wilc: wifi@0 { + reg = <0>; + compatible = "microchip,wilc1000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wilc_default>; + clocks = <&pmc PMC_TYPE_SYSTEM 9>; + clock-names = "rtc"; + interrupts = <PIN_PB25 IRQ_TYPE_NONE>; + interrupt-parent = <&pioA>; + assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>; + assigned-clock-rates = <32768>; + }; }; diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts index e06b58724ca8..806eb1d911d7 100644 --- a/arch/arm/boot/dts/at91-sama5d2_icp.dts +++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts @@ -307,8 +307,11 @@ }; &i2c0 { /* mikrobus i2c */ - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_mikrobus_i2c>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-digital-filter; i2c-digital-filter-width-ns = <35>; status = "okay"; @@ -316,8 +319,11 @@ &i2c1 { dmas = <0>, <0>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + sda-gpios = <&pioA PIN_PD19 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-digital-filter; i2c-digital-filter-width-ns = <35>; status = "okay"; @@ -402,6 +408,12 @@ bias-disable; }; + pinctrl_i2c1_gpio: i2c1_gpio { + pinmux = <PIN_PD19__GPIO>, + <PIN_PD20__GPIO>; + bias-disable; + }; + pinctrl_key_gpio_default: key_gpio_default { pinmux = <PIN_PD0__GPIO>; bias-pull-up; @@ -463,6 +475,12 @@ bias-disable; }; + pinctrl_i2c0_gpio: i2c0_gpio { + pinmux = <PIN_PD21__GPIO>, + <PIN_PD22__GPIO>; + bias-disable; + }; + pinctrl_mikrobus1_an: mikrobus1_an { pinmux = <PIN_PD26__GPIO>; bias-disable; diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts index f3d6aaa3a78d..0e1975c6812e 100644 --- a/arch/arm/boot/dts/at91-sama7g5ek.dts +++ b/arch/arm/boot/dts/at91-sama7g5ek.dts @@ -122,6 +122,14 @@ }; }; +&adc { + vddana-supply = <&vddout25>; + vref-supply = <&vddout25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus1_an_default &pinctrl_mikrobus2_an_default>; + status = "okay"; +}; + &cpu0 { cpu-supply = <&vddcpu>; }; @@ -679,6 +687,18 @@ status = "okay"; }; +&tcb0 { + timer0: timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer1: timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; +}; + &trng { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts index 3ca97b47c69c..7e5c598e7e68 100644 --- a/arch/arm/boot/dts/at91-tse850-3.dts +++ b/arch/arm/boot/dts/at91-tse850-3.dts @@ -262,7 +262,7 @@ &macb1 { status = "okay"; - phy-mode = "rgmii"; + phy-mode = "rmii"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 019f1c3d4d30..7368347c9357 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -166,7 +166,7 @@ clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; - pinctrl@fffff400 { + pinctrl: pinctrl@fffff400 { #address-cells = <1>; #size-cells = <1>; compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi index 0d9ff12bdf28..ca240cd6f6c3 100644 --- a/arch/arm/boot/dts/axp209.dtsi +++ b/arch/arm/boot/dts/axp209.dtsi @@ -53,7 +53,7 @@ interrupt-controller; #interrupt-cells = <1>; - ac_power_supply: ac-power-supply { + ac_power_supply: ac-power { compatible = "x-powers,axp202-ac-power-supply"; status = "disabled"; }; @@ -69,7 +69,7 @@ #gpio-cells = <2>; }; - battery_power_supply: battery-power-supply { + battery_power_supply: battery-power { compatible = "x-powers,axp209-battery-power-supply"; status = "disabled"; }; @@ -112,7 +112,7 @@ }; }; - usb_power_supply: usb-power-supply { + usb_power_supply: usb-power { compatible = "x-powers,axp202-usb-power-supply"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/axp22x.dtsi b/arch/arm/boot/dts/axp22x.dtsi index 65a07a67aca9..a020c12b2884 100644 --- a/arch/arm/boot/dts/axp22x.dtsi +++ b/arch/arm/boot/dts/axp22x.dtsi @@ -52,7 +52,7 @@ interrupt-controller; #interrupt-cells = <1>; - ac_power_supply: ac-power-supply { + ac_power_supply: ac-power { compatible = "x-powers,axp221-ac-power-supply"; status = "disabled"; }; @@ -62,7 +62,7 @@ #io-channel-cells = <1>; }; - battery_power_supply: battery-power-supply { + battery_power_supply: battery-power { compatible = "x-powers,axp221-battery-power-supply"; status = "disabled"; }; @@ -163,7 +163,7 @@ }; }; - usb_power_supply: usb_power_supply { + usb_power_supply: usb-power { compatible = "x-powers,axp221-usb-power-supply"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/axp81x.dtsi b/arch/arm/boot/dts/axp81x.dtsi index 1dfeeceabf4c..b93387b0c1c3 100644 --- a/arch/arm/boot/dts/axp81x.dtsi +++ b/arch/arm/boot/dts/axp81x.dtsi @@ -48,7 +48,7 @@ interrupt-controller; #interrupt-cells = <1>; - ac_power_supply: ac-power-supply { + ac_power_supply: ac-power { compatible = "x-powers,axp813-ac-power-supply"; status = "disabled"; }; @@ -63,18 +63,18 @@ gpio-controller; #gpio-cells = <2>; - gpio0_ldo: gpio0-ldo { + gpio0_ldo: gpio0-ldo-pin { pins = "GPIO0"; function = "ldo"; }; - gpio1_ldo: gpio1-ldo { + gpio1_ldo: gpio1-ldo-pin { pins = "GPIO1"; function = "ldo"; }; }; - battery_power_supply: battery-power-supply { + battery_power_supply: battery-power { compatible = "x-powers,axp813-battery-power-supply"; status = "disabled"; }; @@ -172,7 +172,7 @@ }; }; - usb_power_supply: usb-power-supply { + usb_power_supply: usb-power { compatible = "x-powers,axp813-usb-power-supply"; }; }; diff --git a/arch/arm/boot/dts/bcm-nsp-ax.dtsi b/arch/arm/boot/dts/bcm-nsp-ax.dtsi new file mode 100644 index 000000000000..f2e941dbab10 --- /dev/null +++ b/arch/arm/boot/dts/bcm-nsp-ax.dtsi @@ -0,0 +1,70 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom Northstar Plus Ax stepping-specific bindings. + * Notable differences from B0+ are the secondary-boot-reg and + * lack of DMA coherency. + */ + +&cpu1 { + secondary-boot-reg = <0xffff042c>; +}; + +&dma { + /delete-property/ dma-coherent; +}; + +&sdio { + /delete-property/ dma-coherent; +}; + +&amac0 { + /delete-property/ dma-coherent; +}; + +&amac1 { + /delete-property/ dma-coherent; +}; + +&amac2 { + /delete-property/ dma-coherent; +}; + +&ehci0 { + /delete-property/ dma-coherent; +}; + +&mailbox { + /delete-property/ dma-coherent; +}; + +&xhci { + /delete-property/ dma-coherent; +}; + +&ehci0 { + /delete-property/ dma-coherent; +}; + +&ohci0 { + /delete-property/ dma-coherent; +}; + +&i2c0 { + /delete-property/ dma-coherent; +}; + +&sata { + /delete-property/ dma-coherent; +}; + +&pcie0 { + /delete-property/ dma-coherent; +}; + +&pcie1 { + /delete-property/ dma-coherent; +}; + +&pcie2 { + /delete-property/ dma-coherent; +}; diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 748df7955ae6..1c08daa18858 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -77,7 +77,7 @@ interrupt-affinity = <&cpu0>, <&cpu1>; }; - mpcore@19000000 { + mpcore-bus@19000000 { compatible = "simple-bus"; ranges = <0x00000000 0x19000000 0x00023000>; #address-cells = <1>; @@ -166,7 +166,7 @@ }; }; - axi@18000000 { + axi: axi@18000000 { compatible = "simple-bus"; ranges = <0x00000000 0x18000000 0x0011c40c>; #address-cells = <1>; @@ -219,7 +219,7 @@ status = "disabled"; }; - sdio: sdhci@21000 { + sdio: mmc@21000 { compatible = "brcm,sdhci-iproc-cygnus"; reg = <0x21000 0x100>; interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; @@ -310,6 +310,7 @@ num-cs = <2>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; xhci: usb@29000 { @@ -362,6 +363,42 @@ status = "disabled"; }; + mdio: mdio@32000 { + compatible = "brcm,iproc-mdio"; + reg = <0x32000 0x8>; + #size-cells = <0>; + #address-cells = <1>; + }; + + mdio-mux@32000 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + reg = <0x32000 0x4>; + mux-mask = <0x200>; + #address-cells = <1>; + #size-cells = <0>; + mdio-parent-bus = <&mdio>; + + mdio_int: mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + usb3_phy: usb3-phy@10 { + compatible = "brcm,ns-bx-usb3-phy"; + reg = <0x10>; + usb3-dmp-syscon = <&usb3_dmp>; + #phy-cells = <0>; + status = "disabled"; + }; + }; + + mdio_ext: mdio@200 { + reg = <0x200>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + rng: rng@33000 { compatible = "brcm,bcm-nsp-rng"; reg = <0x33000 0x14>; @@ -520,13 +557,8 @@ }; }; - usb3_phy: usb3-phy@104000 { - compatible = "brcm,ns-bx-usb3-phy"; - reg = <0x104000 0x1000>, - <0x032000 0x1000>; - reg-names = "dmp", "ccb-mii"; - #phy-cells = <0>; - status = "disabled"; + usb3_dmp: syscon@104000 { + reg = <0x104000 0x1000>; }; }; diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts index 72ce80fbf266..631dd5baf68d 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -3,6 +3,7 @@ #include "bcm2711.dtsi" #include "bcm2711-rpi.dtsi" #include "bcm283x-rpi-usb-peripheral.dtsi" +#include "bcm283x-rpi-wifi-bt.dtsi" / { compatible = "raspberrypi,4-model-b", "brcm,bcm2711"; @@ -26,11 +27,6 @@ }; }; - wifi_pwrseq: wifi-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; - }; - sd_io_1v8_reg: sd_io_1v8_reg { compatible = "regulator-gpio"; regulator-name = "vdd-sd-io"; @@ -56,6 +52,10 @@ }; }; +&bt { + shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; +}; + &ddc0 { status = "okay"; }; @@ -178,23 +178,6 @@ status = "okay"; }; -/* SDHCI is used to control the SDIO for wireless */ -&sdhci { - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_gpio34>; - bus-width = <4>; - non-removable; - mmc-pwrseq = <&wifi_pwrseq>; - status = "okay"; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - /* EMMC2 is used to drive the SD card */ &emmc2 { vqmmc-supply = <&sd_io_1v8_reg>; @@ -237,13 +220,6 @@ pinctrl-names = "default"; pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>; uart-has-rtscts; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <2000000>; - shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; - }; }; /* uart1 is mapped to the pin header */ @@ -260,3 +236,7 @@ &vec { status = "disabled"; }; + +&wifi_pwrseq { + reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts b/arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts new file mode 100644 index 000000000000..19600b629be5 --- /dev/null +++ b/arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts @@ -0,0 +1,138 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2711-rpi-cm4.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" + +/ { + model = "Raspberry Pi Compute Module 4 IO Board"; + + leds { + led-act { + gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; + }; + + led-pwr { + label = "PWR"; + gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; + default-state = "keep"; + linux,default-trigger = "default-on"; + }; + }; +}; + +&ddc0 { + status = "okay"; +}; + +&ddc1 { + status = "okay"; +}; + +&gpio { + /* + * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and + * the official GPU firmware DT blob. + * + * Legend: + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "ID_SDA", + "ID_SCL", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD1", + "RXD1", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "RGMII_MDIO", + "RGMIO_MDC", + /* Used by BT module */ + "CTS0", + "RTS0", + "TXD0", + "RXD0", + /* Used by Wifi */ + "SD1_CLK", + "SD1_CMD", + "SD1_DATA0", + "SD1_DATA1", + "SD1_DATA2", + "SD1_DATA3", + /* Shared with SPI flash */ + "PWM0_MISO", + "PWM1_MOSI", + "STATUS_LED_G_CLK", + "SPIFLASH_CE_N", + "SDA0", + "SCL0", + "RGMII_RXCLK", + "RGMII_RXCTL", + "RGMII_RXD0", + "RGMII_RXD1", + "RGMII_RXD2", + "RGMII_RXD3", + "RGMII_TXCLK", + "RGMII_TXCTL", + "RGMII_TXD0", + "RGMII_TXD1", + "RGMII_TXD2", + "RGMII_TXD3"; +}; + +&hdmi0 { + status = "okay"; +}; + +&hdmi1 { + status = "okay"; +}; + +&genet { + status = "okay"; +}; + +&pixelvalve0 { + status = "okay"; +}; + +&pixelvalve1 { + status = "okay"; +}; + +&pixelvalve2 { + status = "okay"; +}; + +&pixelvalve4 { + status = "okay"; +}; + +&vc4 { + status = "okay"; +}; + +&vec { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi b/arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi new file mode 100644 index 000000000000..a2954d466a73 --- /dev/null +++ b/arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi @@ -0,0 +1,113 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2711.dtsi" +#include "bcm2711-rpi.dtsi" +#include "bcm283x-rpi-wifi-bt.dtsi" + +/ { + compatible = "raspberrypi,4-compute-module", "brcm,bcm2711"; + + chosen { + /* 8250 auxiliary UART instead of pl011 */ + stdout-path = "serial1:115200n8"; + }; + + sd_io_1v8_reg: sd_io_1v8_reg { + compatible = "regulator-gpio"; + regulator-name = "vdd-sd-io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-settling-time-us = <5000>; + gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1>, + <3300000 0x0>; + status = "okay"; + }; + + sd_vcc_reg: sd_vcc_reg { + compatible = "regulator-fixed"; + regulator-name = "vcc-sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>; + }; +}; + +&bt { + shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; +}; + +/* EMMC2 is used to drive the eMMC */ +&emmc2 { + bus-width = <8>; + vqmmc-supply = <&sd_io_1v8_reg>; + vmmc-supply = <&sd_vcc_reg>; + broken-cd; + /* Even the IP block is limited to 100 MHz + * this provides a throughput gain + */ + mmc-hs200-1_8v; + status = "okay"; +}; + +&expgpio { + gpio-line-names = "BT_ON", + "WL_ON", + "PWR_LED_OFF", + "ANT1", + "VDD_SD_IO_SEL", + "CAM_GPIO", + "SD_PWR_ON", + "ANT2"; + + ant1: ant1-hog { + gpio-hog; + gpios = <3 GPIO_ACTIVE_HIGH>; + /* internal antenna enabled */ + output-high; + line-name = "ant1"; + }; + + ant2: ant2-hog { + gpio-hog; + gpios = <7 GPIO_ACTIVE_HIGH>; + /* external antenna disabled */ + output-low; + line-name = "ant2"; + }; +}; + +&genet { + phy-handle = <&phy1>; + phy-mode = "rgmii-rxid"; + status = "okay"; +}; + +&genet_mdio { + phy1: ethernet-phy@0 { + /* No PHY interrupt */ + reg = <0x0>; + }; +}; + +/* uart0 communicates with the BT module */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>; + uart-has-rtscts; +}; + +/* uart1 is mapped to the pin header */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_gpio14>; + status = "okay"; +}; + +&wifi_pwrseq { + reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts index 33b2b77aa47d..243236bc1e00 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts @@ -7,6 +7,7 @@ #include "bcm2835.dtsi" #include "bcm2835-rpi.dtsi" #include "bcm283x-rpi-usb-otg.dtsi" +#include "bcm283x-rpi-wifi-bt.dtsi" / { compatible = "raspberrypi,model-zero-w", "brcm,bcm2835"; @@ -27,11 +28,10 @@ gpios = <&gpio 47 GPIO_ACTIVE_LOW>; }; }; +}; - wifi_pwrseq: wifi-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>; - }; +&bt { + shutdown-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>; }; &gpio { @@ -110,19 +110,7 @@ }; &sdhci { - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>; - bus-width = <4>; - mmc-pwrseq = <&wifi_pwrseq>; - non-removable; - status = "okay"; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; }; &sdhost { @@ -135,13 +123,6 @@ &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <2000000>; - shutdown-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>; - }; }; &uart1 { @@ -149,3 +130,7 @@ pinctrl-0 = <&uart1_gpio14>; status = "okay"; }; + +&wifi_pwrseq { + reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts index 77099a7871b0..d73daf5bff1d 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts @@ -3,6 +3,7 @@ #include "bcm2837.dtsi" #include "bcm2836-rpi.dtsi" #include "bcm283x-rpi-usb-host.dtsi" +#include "bcm283x-rpi-wifi-bt.dtsi" / { compatible = "raspberrypi,3-model-a-plus", "brcm,bcm2837"; @@ -130,28 +131,6 @@ status = "okay"; }; -/* - * SDHCI is used to control the SDIO for wireless - * - * WL_REG_ON and BT_REG_ON of the CYW43455 Wifi/BT module are driven - * by a single GPIO. We can't give GPIO control to one of the drivers, - * otherwise the other part would get unexpectedly disturbed. - */ -&sdhci { - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_gpio34>; - status = "okay"; - bus-width = <4>; - non-removable; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - /* SDHOST is used to drive the SD card */ &sdhost { pinctrl-names = "default"; @@ -160,16 +139,15 @@ bus-width = <4>; }; -/* uart0 communicates with the BT module */ +/* uart0 communicates with the BT module + * + * WL_REG_ON and BT_REG_ON of the CYW43455 Wifi/BT module are driven + * by a single GPIO. We can't give GPIO control to one of the drivers, + * otherwise the other part would get unexpectedly disturbed. + */ &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <2000000>; - }; }; /* uart1 is mapped to the pin header */ diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts index 61010266ca9a..e12938baaf12 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts @@ -4,6 +4,7 @@ #include "bcm2836-rpi.dtsi" #include "bcm283x-rpi-lan7515.dtsi" #include "bcm283x-rpi-usb-host.dtsi" +#include "bcm283x-rpi-wifi-bt.dtsi" / { compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837"; @@ -31,11 +32,10 @@ linux,default-trigger = "default-on"; }; }; +}; - wifi_pwrseq: wifi-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; - }; +&bt { + shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; }; &firmware { @@ -137,23 +137,6 @@ status = "okay"; }; -/* SDHCI is used to control the SDIO for wireless */ -&sdhci { - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_gpio34>; - status = "okay"; - bus-width = <4>; - non-removable; - mmc-pwrseq = <&wifi_pwrseq>; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - /* SDHOST is used to drive the SD card */ &sdhost { pinctrl-names = "default"; @@ -166,13 +149,6 @@ &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <2000000>; - shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; - }; }; /* uart1 is mapped to the pin header */ @@ -181,3 +157,7 @@ pinctrl-0 = <&uart1_gpio14>; status = "okay"; }; + +&wifi_pwrseq { + reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts index dd4a48604097..42b5383b55d8 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts @@ -4,6 +4,7 @@ #include "bcm2836-rpi.dtsi" #include "bcm283x-rpi-smsc9514.dtsi" #include "bcm283x-rpi-usb-host.dtsi" +#include "bcm283x-rpi-wifi-bt.dtsi" / { compatible = "raspberrypi,3-model-b", "brcm,bcm2837"; @@ -24,11 +25,10 @@ gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>; }; }; +}; - wifi_pwrseq: wifi-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; - }; +&bt { + shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; }; &firmware { @@ -134,13 +134,6 @@ &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_gpio32 &gpclk2_gpio43>; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <2000000>; - shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; - }; }; /* uart1 is mapped to the pin header */ @@ -150,23 +143,6 @@ status = "okay"; }; -/* SDHCI is used to control the SDIO for wireless */ -&sdhci { - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_gpio34>; - status = "okay"; - bus-width = <4>; - non-removable; - mmc-pwrseq = <&wifi_pwrseq>; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - /* SDHOST is used to drive the SD card */ &sdhost { pinctrl-names = "default"; @@ -174,3 +150,7 @@ status = "okay"; bus-width = <4>; }; + +&wifi_pwrseq { + reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/bcm283x-rpi-wifi-bt.dtsi b/arch/arm/boot/dts/bcm283x-rpi-wifi-bt.dtsi new file mode 100644 index 000000000000..0b64cc19941f --- /dev/null +++ b/arch/arm/boot/dts/bcm283x-rpi-wifi-bt.dtsi @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + }; +}; + +/* SDHCI is used to control the SDIO for wireless */ +&sdhci { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_gpio34>; + bus-width = <4>; + non-removable; + mmc-pwrseq = <&wifi_pwrseq>; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* uart0 communicates with the BT module */ +&uart0 { + status = "okay"; + + bt: bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <2000000>; + }; +}; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index 61c7b137607e..43a5d675dd67 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -20,7 +20,7 @@ bootargs = "console=ttyS0,115200 earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>, <0x88000000 0x08000000>; @@ -94,3 +94,40 @@ &usb3_phy { status = "okay"; }; + +&srab { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts index d857751ec507..d00495a8b6fc 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts @@ -117,3 +117,40 @@ }; }; }; + +&srab { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts index 6c6bb7b17d27..7546c8d07bcd 100644 --- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>, <0x88000000 0x08000000>; diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts index d29e7f80ea6a..beae9eab9cb8 100644 --- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>, <0x88000000 0x18000000>; diff --git a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts index 9b6887d477d8..7879f7d7d9c3 100644 --- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts +++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts @@ -16,7 +16,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>, <0x88000000 0x08000000>; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts index 7989a53597d4..56d309dbc6b0 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>, <0x88000000 0x08000000>; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts index 87b655be674c..89f992af61d1 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts @@ -30,7 +30,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>, <0x88000000 0x08000000>; @@ -187,3 +187,45 @@ &usb3_phy { status = "okay"; }; + +&srab { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@8 { + reg = <8>; + label = "cpu"; + ethernet = <&gmac2>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts index f806be5da723..c2a266a439d0 100644 --- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts +++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts @@ -15,7 +15,7 @@ bootargs = "console=ttyS0,115200 earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts new file mode 100644 index 000000000000..448060561cd0 --- /dev/null +++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts @@ -0,0 +1,200 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2021 Arınç ÃœNAL <arinc.unal@arinc9.com> + */ + +/dts-v1/; + +#include "bcm47094.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "asus,rt-ac88u", "brcm,bcm47094", "brcm,bcm4708"; + model = "Asus RT-AC88U"; + + chosen { + bootargs = "earlycon"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; + }; + + nvram@1c080000 { + compatible = "brcm,nvram"; + reg = <0x1c080000 0x00180000>; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "white:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + wan-red { + label = "red:wan"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + }; + + lan { + label = "white:lan"; + gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>; + }; + + usb2 { + label = "white:usb2"; + gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; + trigger-sources = <&ehci_port2>; + linux,default-trigger = "usbport"; + }; + + usb3 { + label = "white:usb3"; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + trigger-sources = <&ehci_port1>, <&xhci_port1>; + linux,default-trigger = "usbport"; + }; + + wps { + label = "white:wps"; + gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; + }; + + reset { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + + wifi { + label = "Wi-Fi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + }; + + led { + label = "Backlight"; + linux,code = <KEY_BRIGHTNESS_ZERO>; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&srab { + compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab"; + status = "okay"; + dsa,member = <0 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + sw0_p5: port@5 { + reg = <5>; + label = "extsw"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@7 { + reg = <7>; + ethernet = <&gmac1>; + label = "cpu"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@8 { + reg = <8>; + ethernet = <&gmac2>; + label = "cpu"; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; + +&usb2 { + vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; +}; + +&usb3_phy { + status = "okay"; +}; + +&nandcs { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x00080000>; + read-only; + }; + + partition@80000 { + label = "nvram"; + reg = <0x00080000 0x00180000>; + }; + + partition@200000 { + label = "firmware"; + reg = <0x00200000 0x07e00000>; + compatible = "brcm,trx"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts index a6e2aeb28675..60bfd52ee677 100644 --- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts @@ -118,3 +118,45 @@ &usb3_phy { status = "okay"; }; + +&srab { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@8 { + reg = <8>; + label = "cpu"; + ethernet = <&gmac2>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts index 05d4f2931772..9bef6b9bfa8d 100644 --- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts +++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts @@ -129,7 +129,7 @@ }; }; - mdio-bus-mux@18003000 { + mdio-mux@18003000 { /* BIT(9) = 1 => external mdio */ mdio@200 { diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts index 4b8117f32d26..b51a0ee7e584 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts @@ -68,3 +68,40 @@ &usb3_phy { status = "okay"; }; + +&srab { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "wan"; + }; + + port@1 { + reg = <1>; + label = "lan4"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan2"; + }; + + port@4 { + reg = <4>; + label = "lan1"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts index 5fecce0422c7..b959a9504eea 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts @@ -68,3 +68,40 @@ &usb3_phy { status = "okay"; }; + +&srab { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "wan"; + }; + + port@1 { + reg = <1>; + label = "lan4"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan2"; + }; + + port@4 { + reg = <4>; + label = "lan1"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts index 452b8d0ab180..b0d8a688141d 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts @@ -16,7 +16,7 @@ bootargs = "earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>, <0x88000000 0x18000000>; diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts index 049cdfd92706..07eb3a8287d6 100644 --- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts +++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts @@ -105,3 +105,40 @@ }; }; }; + +&switch { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "wan"; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@4 { + reg = <4>; + label = "lan4"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts index 3b978dc8997a..64f973e1ef12 100644 --- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts +++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts @@ -20,7 +20,7 @@ bootargs = " console=ttyS0,115200n8 earlycon"; }; - memory { + memory@0 { reg = <0x00000000 0x08000000>; device_type = "memory"; }; @@ -110,6 +110,12 @@ reg = <0x50>; pagesize = <32>; read-only; + #address-cells = <1>; + #size-cells = <1>; + + mac_address: mac-address@66 { + reg = <0x66 0x6>; + }; }; }; }; @@ -133,6 +139,11 @@ */ }; +&gmac0 { + nvmem-cell-names = "mac-address"; + nvmem-cells = <&mac_address>; +}; + &gmac1 { status = "disabled"; }; @@ -195,3 +206,25 @@ }; }; }; + +&srab { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "poe"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + + fixed-link { + speed = <1000>; + duplex-full; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index f92089290ccd..d4f355015e3c 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -19,7 +19,7 @@ #size-cells = <1>; interrupt-parent = <&gic>; - chipcommonA@18000000 { + chipcommon-a-bus@18000000 { compatible = "simple-bus"; ranges = <0x00000000 0x18000000 0x00001000>; #address-cells = <1>; @@ -44,7 +44,7 @@ }; }; - mpcore@19000000 { + mpcore-bus@19000000 { compatible = "simple-bus"; ranges = <0x00000000 0x19000000 0x00023000>; #address-cells = <1>; @@ -369,8 +369,8 @@ #address-cells = <1>; }; - mdio-bus-mux@18003000 { - compatible = "mdio-mux-mmioreg"; + mdio-mux@18003000 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; mdio-parent-bus = <&mdio>; #address-cells = <1>; #size-cells = <0>; @@ -415,7 +415,7 @@ status = "disabled"; }; - dmu@1800c000 { + dmu-bus@1800c000 { compatible = "simple-bus"; ranges = <0 0x1800c000 0x1000>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi index 51546fccc616..3f03a381db0f 100644 --- a/arch/arm/boot/dts/bcm53573.dtsi +++ b/arch/arm/boot/dts/bcm53573.dtsi @@ -180,6 +180,24 @@ gmac0: ethernet@5000 { reg = <0x5000 0x1000>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch: switch@1e { + compatible = "brcm,bcm53125"; + reg = <0x1e>; + + status = "disabled"; + + /* ports are defined in board DTS */ + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; }; gmac1: ethernet@b000 { diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts index 3d13e46c6949..d9eb2040b963 100644 --- a/arch/arm/boot/dts/bcm94708.dts +++ b/arch/arm/boot/dts/bcm94708.dts @@ -38,7 +38,7 @@ model = "NorthStar SVK (BCM94708)"; compatible = "brcm,bcm94708", "brcm,bcm4708"; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/bcm94709.dts index 5017b7b259cb..618c812eef73 100644 --- a/arch/arm/boot/dts/bcm94709.dts +++ b/arch/arm/boot/dts/bcm94709.dts @@ -38,7 +38,7 @@ model = "NorthStar SVK (BCM94709)"; compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708"; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts index 1f73885ec274..60376b62cd5f 100644 --- a/arch/arm/boot/dts/bcm958522er.dts +++ b/arch/arm/boot/dts/bcm958522er.dts @@ -37,7 +37,7 @@ / { model = "NorthStar Plus SVK (BCM958522ER)"; - compatible = "brcm,bcm58522", "brcm,nsp"; + compatible = "brcm,bcm958522er", "brcm,bcm58522", "brcm,nsp"; chosen { stdout-path = "serial0:115200n8"; @@ -134,6 +134,7 @@ }; &qspi { + status = "okay"; bspi-sel = <0>; flash: m25p80@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts index b6b9ca8b0972..8eeb319f5b54 100644 --- a/arch/arm/boot/dts/bcm958525er.dts +++ b/arch/arm/boot/dts/bcm958525er.dts @@ -37,7 +37,7 @@ / { model = "NorthStar Plus SVK (BCM958525ER)"; - compatible = "brcm,bcm58525", "brcm,nsp"; + compatible = "brcm,bcm958525er", "brcm,bcm58525", "brcm,nsp"; chosen { stdout-path = "serial0:115200n8"; @@ -134,6 +134,7 @@ }; &qspi { + status = "okay"; bspi-sel = <0>; flash: m25p80@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts index ecf426f6ad5d..dc86d5a91292 100644 --- a/arch/arm/boot/dts/bcm958525xmc.dts +++ b/arch/arm/boot/dts/bcm958525xmc.dts @@ -37,7 +37,7 @@ / { model = "NorthStar Plus XMC (BCM958525xmc)"; - compatible = "brcm,bcm58525", "brcm,nsp"; + compatible = "brcm,bcm958525xmc", "brcm,bcm58525", "brcm,nsp"; chosen { stdout-path = "serial0:115200n8"; @@ -150,6 +150,7 @@ }; &qspi { + status = "okay"; bspi-sel = <0>; flash: m25p80@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts index 8ca18da981ad..c457e53d886e 100644 --- a/arch/arm/boot/dts/bcm958622hr.dts +++ b/arch/arm/boot/dts/bcm958622hr.dts @@ -37,7 +37,7 @@ / { model = "NorthStar Plus SVK (BCM958622HR)"; - compatible = "brcm,bcm58622", "brcm,nsp"; + compatible = "brcm,bcm958622hr", "brcm,bcm58622", "brcm,nsp"; chosen { stdout-path = "serial0:115200n8"; @@ -138,6 +138,7 @@ }; &qspi { + status = "okay"; bspi-sel = <0>; flash: m25p80@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts index 9747378db531..c06871915a1c 100644 --- a/arch/arm/boot/dts/bcm958623hr.dts +++ b/arch/arm/boot/dts/bcm958623hr.dts @@ -37,7 +37,7 @@ / { model = "NorthStar Plus SVK (BCM958623HR)"; - compatible = "brcm,bcm58623", "brcm,nsp"; + compatible = "brcm,bcm958623hr", "brcm,bcm58623", "brcm,nsp"; chosen { stdout-path = "serial0:115200n8"; @@ -142,6 +142,7 @@ }; &qspi { + status = "okay"; bspi-sel = <0>; flash: m25p80@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi new file mode 100644 index 000000000000..102acd85fab2 --- /dev/null +++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi @@ -0,0 +1,281 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX65 series (Alamo). + * + * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com> + */ + +#include "bcm958625-meraki-mx6x-common.dtsi" + +/ { + keys { + compatible = "gpio-keys-polled"; + autorepeat; + poll-interval = <20>; + + reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpioa 8 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + /* green:wan1-left */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <0>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 25 GPIO_ACTIVE_LOW>; + }; + + led-1 { + /* green:wan1-right */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <1>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 24 GPIO_ACTIVE_LOW>; + }; + + led-2 { + /* green:wan2-left */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <2>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 27 GPIO_ACTIVE_LOW>; + }; + + led-3 { + /* green:wan2-right */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <3>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 26 GPIO_ACTIVE_LOW>; + }; + + led-4 { + /* amber:power */ + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_AMBER>; + gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + led-5 { + /* white:status */ + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&axi { + mdio-mux@3f1c0 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + reg = <0x3f1c0 0x4>; + mux-mask = <0x2000>; + mdio-parent-bus = <&mdio_ext>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + phy_port6: phy@0 { + reg = <0>; + }; + + phy_port7: phy@1 { + reg = <1>; + }; + + phy_port8: phy@2 { + reg = <2>; + }; + + phy_port9: phy@3 { + reg = <3>; + }; + + phy_port10: phy@4 { + reg = <4>; + }; + + switch@10 { + compatible = "qca,qca8337"; + reg = <0x10>; + dsa,member = <1 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + ethernet = <&sgmii1>; + phy-mode = "sgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan8"; + phy-handle = <&phy_port6>; + }; + + port@2 { + reg = <2>; + label = "lan9"; + phy-handle = <&phy_port7>; + }; + + port@3 { + reg = <3>; + label = "lan10"; + phy-handle = <&phy_port8>; + }; + + port@4 { + reg = <4>; + label = "lan11"; + phy-handle = <&phy_port9>; + }; + + port@5 { + reg = <5>; + label = "lan12"; + phy-handle = <&phy_port10>; + }; + }; + }; + }; + + mdio-mii@2000 { + reg = <0x2000>; + #address-cells = <1>; + #size-cells = <0>; + + phy_port1: phy@0 { + reg = <0>; + }; + + phy_port2: phy@1 { + reg = <1>; + }; + + phy_port3: phy@2 { + reg = <2>; + }; + + phy_port4: phy@3 { + reg = <3>; + }; + + phy_port5: phy@4 { + reg = <4>; + }; + + switch@10 { + compatible = "qca,qca8337"; + reg = <0x10>; + dsa,member = <2 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + ethernet = <&sgmii0>; + phy-mode = "sgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan3"; + phy-handle = <&phy_port1>; + }; + + port@2 { + reg = <2>; + label = "lan4"; + phy-handle = <&phy_port2>; + }; + + port@3 { + reg = <3>; + label = "lan5"; + phy-handle = <&phy_port3>; + }; + + port@4 { + reg = <4>; + label = "lan6"; + phy-handle = <&phy_port4>; + }; + + port@5 { + reg = <5>; + label = "lan7"; + phy-handle = <&phy_port5>; + }; + }; + }; + }; + }; +}; + +&srab { + compatible = "brcm,bcm58625-srab", "brcm,nsp-srab"; + status = "okay"; + dsa,member = <0 0>; + + ports { + port@0 { + label = "wan1"; + reg = <0>; + }; + + port@1 { + label = "wan2"; + reg = <1>; + }; + + sgmii0: port@4 { + label = "sw0"; + reg = <4>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + sgmii1: port@5 { + label = "sw1"; + reg = <5>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@8 { + ethernet = <&amac2>; + reg = <8>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi new file mode 100644 index 000000000000..7c487c74fd10 --- /dev/null +++ b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi @@ -0,0 +1,163 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX64 series (Kingpin). + * + * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com> + */ + +#include "bcm958625-meraki-mx6x-common.dtsi" + +/ { + + keys { + compatible = "gpio-keys-polled"; + autorepeat; + poll-interval = <20>; + + reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpioa 6 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + /* green:lan1-left */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <0>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 19 GPIO_ACTIVE_LOW>; + }; + + led-1 { + /* green:lan1-right */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <1>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 18 GPIO_ACTIVE_LOW>; + }; + + led-2 { + /* green:lan2-left */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <2>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 24 GPIO_ACTIVE_LOW>; + }; + + led-3 { + /* green:lan2-right */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <3>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 20 GPIO_ACTIVE_LOW>; + }; + + led-4 { + /* green:lan3-left */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <4>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 26 GPIO_ACTIVE_LOW>; + }; + + led-5 { + /* green:lan3-right */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <5>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 25 GPIO_ACTIVE_LOW>; + }; + + led-6 { + /* green:lan4-left */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <6>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 28 GPIO_ACTIVE_LOW>; + }; + + led-7 { + /* green:lan4-right */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <7>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 27 GPIO_ACTIVE_LOW>; + }; + + led-8 { + /* green:wan-left */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <8>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 30 GPIO_ACTIVE_LOW>; + }; + + led-9 { + /* green:wan-right */ + function = LED_FUNCTION_ACTIVITY; + function-enumerator = <9>; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpioa 29 GPIO_ACTIVE_LOW>; + }; + + led-a { + /* amber:power */ + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_AMBER>; + gpios = <&gpioa 0 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + led-b { + /* white:status */ + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&srab { + compatible = "brcm,bcm58625-srab", "brcm,nsp-srab"; + status = "okay"; + + ports { + port@0 { + label = "lan1"; + reg = <0>; + }; + + port@1 { + label = "lan2"; + reg = <1>; + }; + + port@2 { + label = "lan3"; + reg = <2>; + }; + + port@3 { + label = "lan4"; + reg = <3>; + }; + + port@4 { + label = "wan"; + reg = <4>; + }; + + port@8 { + ethernet = <&amac2>; + reg = <8>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts new file mode 100644 index 000000000000..9944566c1195 --- /dev/null +++ b/arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX64 with A0 SoC. + * + * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com> + */ + +/dts-v1/; + +#include "bcm958625-meraki-kingpin.dtsi" +#include "bcm-nsp-ax.dtsi" + +/ { + model = "Cisco Meraki MX64(A0)"; + compatible = "meraki,mx64-a0", "brcm,bcm58625", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; +}; diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64.dts new file mode 100644 index 000000000000..06939438e874 --- /dev/null +++ b/arch/arm/boot/dts/bcm958625-meraki-mx64.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX64 with B0+ SoC. + * + * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com> + */ + +/dts-v1/; + +#include "bcm958625-meraki-kingpin.dtsi" + +/ { + model = "Cisco Meraki MX64"; + compatible = "meraki,mx64", "brcm,bcm58625", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; +}; diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts new file mode 100644 index 000000000000..112fddb1eed8 --- /dev/null +++ b/arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX64W with A0 SoC. + * + * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com> + */ + +/dts-v1/; + +#include "bcm958625-meraki-kingpin.dtsi" +#include "bcm-nsp-ax.dtsi" + +/ { + model = "Cisco Meraki MX64W(A0)"; + compatible = "meraki,mx64w-a0", "brcm,bcm58625", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64w.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64w.dts new file mode 100644 index 000000000000..de2e367c3e78 --- /dev/null +++ b/arch/arm/boot/dts/bcm958625-meraki-mx64w.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX64W with B0+ SoC. + * + * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com> + */ + +/dts-v1/; + +#include "bcm958625-meraki-kingpin.dtsi" + +/ { + model = "Cisco Meraki MX64W"; + compatible = "meraki,mx64w", "brcm,bcm58625", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx65.dts b/arch/arm/boot/dts/bcm958625-meraki-mx65.dts new file mode 100644 index 000000000000..d1b684dcdbfa --- /dev/null +++ b/arch/arm/boot/dts/bcm958625-meraki-mx65.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX65. + * + * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com> + */ + +/dts-v1/; + +#include "bcm958625-meraki-alamo.dtsi" + +/ { + model = "Cisco Meraki MX65"; + compatible = "meraki,mx65", "brcm,bcm58625", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; +}; diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx65w.dts b/arch/arm/boot/dts/bcm958625-meraki-mx65w.dts new file mode 100644 index 000000000000..a2165aba3676 --- /dev/null +++ b/arch/arm/boot/dts/bcm958625-meraki-mx65w.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindings for Cisco Meraki MX65W. + * + * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com> + */ + +/dts-v1/; + +#include "bcm958625-meraki-alamo.dtsi" + +/ { + model = "Cisco Meraki MX65W"; + compatible = "meraki,mx65w", "brcm,bcm58625", "brcm,nsp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi new file mode 100644 index 000000000000..6519b7c61af1 --- /dev/null +++ b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi @@ -0,0 +1,129 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Common Bindings for Cisco Meraki MX64 (Kingpin) and MX65 (Alamo) devices. + * + * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com> + */ + +#include "bcm-nsp.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + pwm-leds { + compatible = "pwm-leds"; + + led-1 { + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_RED>; + pwms = <&pwm 1 50000>; + max-brightness = <255>; + }; + + led-2 { + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_GREEN>; + pwms = <&pwm 2 50000>; + max-brightness = <255>; + }; + + led-3 { + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_BLUE>; + pwms = <&pwm 3 50000>; + max-brightness = <255>; + }; + }; +}; + +&amac2 { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + read-only; + }; +}; + +&nand_controller { + nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "shmoo"; + reg = <0x80000 0x80000>; + read-only; + }; + + partition@100000 { + label = "bootkernel1"; + reg = <0x100000 0x300000>; + }; + + partition@400000 { + label = "nvram"; + reg = <0x400000 0x100000>; + }; + + partition@500000 { + label = "bootkernel2"; + reg = <0x500000 0x300000>; + }; + + partition@800000 { + label = "ubi"; + reg = <0x800000 0x3f700000>; + }; + }; +}; + +&ohci0 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_leds>; + + pwm_leds: pwm_leds { + function = "pwm"; + groups = "pwm1_grp", "pwm2_grp", "pwm3_grp"; + }; +}; + +&pwm { + status = "okay"; + #pwm-cells = <2>; +}; + +&uart0 { + clock-frequency = <62500000>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts index 0f92b773afb8..b22fc6624ae4 100644 --- a/arch/arm/boot/dts/bcm958625hr.dts +++ b/arch/arm/boot/dts/bcm958625hr.dts @@ -37,7 +37,7 @@ / { model = "NorthStar Plus SVK (BCM958625HR)"; - compatible = "brcm,bcm58625", "brcm,nsp"; + compatible = "brcm,bcm958625hr", "brcm,bcm58625", "brcm,nsp"; chosen { stdout-path = "serial0:115200n8"; @@ -149,6 +149,7 @@ }; &qspi { + status = "okay"; bspi-sel = <0>; flash: m25p80@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts index 9e984ca0e6df..0183f8965a74 100644 --- a/arch/arm/boot/dts/bcm958625k.dts +++ b/arch/arm/boot/dts/bcm958625k.dts @@ -36,7 +36,7 @@ / { model = "NorthStar Plus SVK (BCM958625K)"; - compatible = "brcm,bcm58625", "brcm,nsp"; + compatible = "brcm,bcm958625k", "brcm,bcm58625", "brcm,nsp"; chosen { stdout-path = "serial0:115200n8"; @@ -153,6 +153,7 @@ }; &qspi { + status = "okay"; bspi-sel = <0>; flash: m25p80@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts index 5475dab8181d..007e34715956 100644 --- a/arch/arm/boot/dts/bcm988312hr.dts +++ b/arch/arm/boot/dts/bcm988312hr.dts @@ -37,7 +37,7 @@ / { model = "NorthStar Plus SVK (BCM988312HR)"; - compatible = "brcm,bcm88312", "brcm,nsp"; + compatible = "brcm,bcm988312hr", "brcm,bcm88312", "brcm,nsp"; chosen { stdout-path = "serial0:115200n8"; @@ -58,6 +58,10 @@ /* USB 3 support needed to be complete */ +&dma { + status = "okay"; +}; + &amac0 { status = "okay"; }; @@ -134,6 +138,7 @@ }; &qspi { + status = "okay"; bspi-sel = <0>; flash: m25p80@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index dfc1ef8ef6ae..6b485cbed8d5 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -965,6 +965,25 @@ }; }; + target-module@59000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x59000020 0x4>; + reg-names = "rev"; + clocks = <&dss_clkctrl DRA7_DSS_BB2D_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x59000000 0x1000>; + + bb2d: gpu@0 { + compatible = "vivante,gc"; + reg = <0x0 0x700>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&dss_clkctrl DRA7_BB2D_CLKCTRL 0>; + clock-names = "core"; + }; + }; + aes1_target: target-module@4b500000 { compatible = "ti,sysc-omap2", "ti,sysc"; reg = <0x4b500080 0x4>, diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi index cfb239d5186a..1a49f15f2df2 100644 --- a/arch/arm/boot/dts/e60k02.dtsi +++ b/arch/arm/boot/dts/e60k02.dtsi @@ -41,7 +41,7 @@ leds: leds { compatible = "gpio-leds"; - on { + led { label = "e60k02:white:on"; gpios = <&gpio5 7 GPIO_ACTIVE_LOW>; linux,default-trigger = "timer"; diff --git a/arch/arm/boot/dts/e70k02.dtsi b/arch/arm/boot/dts/e70k02.dtsi new file mode 100644 index 000000000000..156de653f2cd --- /dev/null +++ b/arch/arm/boot/dts/e70k02.dtsi @@ -0,0 +1,320 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2021 Andreas Kemnade + * based on works + * Copyright 2016 Freescale Semiconductor, Inc. + * and + * Copyright (C) 2014 Ricoh Electronic Devices Co., Ltd + * + * Netronix E70K02 board common. + * This board is equipped with different SoCs and + * found in ebook-readers like the Kobo Clara HD (with i.MX6SLL) and + * the Tolino Shine 3 (with i.MX6SL) + */ +#include <dt-bindings/input/input.h> + +/ { + aliases { + mmc0 = &usdhc1; + mmc1 = &usdhc3; + }; + + chosen { + stdout-path = &uart1; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + + cover { + label = "Cover"; + gpios = <&gpio4 23 GPIO_ACTIVE_LOW>; + linux,code = <SW_LID>; + linux,input-type = <EV_SW>; + wakeup-source; + }; + + pageup { + label = "PageUp"; + gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_PAGEUP>; + }; + + pagedown { + label = "PageDown"; + gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_PAGEDOWN>; + }; + }; + + leds: leds { + compatible = "gpio-leds"; + + led { + label = "e70k02:white:on"; + gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + reg_wifi: regulator-wifi { + compatible = "regulator-fixed"; + regulator-name = "SD3_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + post-power-on-delay-ms = <20>; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + status = "okay"; + + lm3630a: backlight@36 { + reg = <0x36>; + compatible = "ti,lm3630a"; + enable-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + led-sources = <0>; + label = "backlight_warm"; + default-brightness = <0>; + max-brightness = <255>; + }; + + led@1 { + reg = <1>; + led-sources = <1>; + label = "backlight_cold"; + default-brightness = <0>; + max-brightness = <255>; + }; + }; + + /* TODO: KX122 acceleration sensor a 0x1e */ + +}; + +&i2c2 { + clock-frequency = <100000>; + status = "okay"; + + /* TODO: CYTTSP5 touch controller at 0x24 */ + + /* TODO: SY7636 PMIC for E Ink at 0x62 */ + +}; + +&i2c3 { + clock-frequency = <100000>; + status = "okay"; + + ricoh619: pmic@32 { + compatible = "ricoh,rc5t619"; + reg = <0x32>; + interrupt-parent = <&gpio4>; + interrupts = <19 IRQ_TYPE_EDGE_FALLING>; + system-power-controller; + + regulators { + dcdc1_reg: DCDC1 { + regulator-name = "DCDC1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <900000>; + regulator-suspend-min-microvolt = <900000>; + }; + }; + + /* Core3_3V3 */ + dcdc2_reg: DCDC2 { + regulator-name = "DCDC2"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <3300000>; + regulator-suspend-min-microvolt = <3300000>; + }; + }; + + dcdc3_reg: DCDC3 { + regulator-name = "DCDC3"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <1140000>; + regulator-suspend-min-microvolt = <1140000>; + }; + }; + + /* Core4_1V2 */ + dcdc4_reg: DCDC4 { + regulator-name = "DCDC4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <1140000>; + regulator-suspend-min-microvolt = <1140000>; + }; + }; + + /* Core4_1V8 */ + dcdc5_reg: DCDC5 { + regulator-name = "DCDC5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <1700000>; + regulator-suspend-min-microvolt = <1700000>; + }; + }; + + ldo1_reg: LDO1 { + regulator-name = "LDO1"; + regulator-boot-on; + }; + + /* Core1_3V3 */ + ldo2_reg: LDO2 { + regulator-name = "LDO2"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <3000000>; + regulator-suspend-min-microvolt = <3000000>; + }; + }; + + /* Core5_1V2 */ + ldo3_reg: LDO3 { + regulator-name = "LDO3"; + regulator-always-on; + regulator-boot-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "LDO4"; + regulator-boot-on; + }; + + /* SPD_3V3 */ + ldo5_reg: LDO5 { + regulator-name = "LDO5"; + regulator-always-on; + regulator-boot-on; + }; + + /* DDR_0V6 */ + ldo6_reg: LDO6 { + regulator-name = "LDO6"; + regulator-always-on; + regulator-boot-on; + }; + + /* VDD_PWM */ + ldo7_reg: LDO7 { + regulator-name = "LDO7"; + regulator-boot-on; + }; + + /* ldo_1v8 */ + ldo8_reg: LDO8 { + regulator-name = "LDO8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "LDO9"; + regulator-boot-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "LDO10"; + regulator-boot-on; + }; + + ldortc1_reg: LDORTC1 { + regulator-name = "LDORTC1"; + regulator-boot-on; + }; + }; + }; +}; + +&snvs_rtc { + /* we are using the rtc in the pmic, not disabled in imx6sll.dtsi */ + status = "disabled"; +}; + +&uart1 { + status = "okay"; +}; + +&usdhc1 { + non-removable; + no-1-8-v; + status = "okay"; +}; + +&usdhc3 { + vmmc-supply = <®_wifi>; + mmc-pwrseq = <&wifi_pwrseq>; + cap-power-off-card; + non-removable; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + disable-over-current; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index 0a27f034dd6b..89495dd37358 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -80,7 +80,7 @@ }; ethernet@20000000 { - compatible = "smsc,lan9220", "smsc,lan9115"; + compatible = "smsc,lan9221", "smsc,lan9115"; reg = <0x20000000 0x10000>; phy-mode = "mii"; interrupt-parent = <&gpio0>; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index f6ba5e426040..5f7f8fedfb92 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -19,6 +19,7 @@ / { model = "Samsung Rinato board"; compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3"; + chassis-type = "watch"; aliases { i2c7 = &i2c_max77836; diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts index 55922176807e..19bb7dc98b33 100644 --- a/arch/arm/boot/dts/exynos4210-i9100.dts +++ b/arch/arm/boot/dts/exynos4210-i9100.dts @@ -18,6 +18,7 @@ / { model = "Samsung Galaxy S2 (GT-I9100)"; compatible = "samsung,i9100", "samsung,exynos4210", "samsung,exynos4"; + chassis-type = "handset"; memory@40000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 1c5394152561..435fda60e86d 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -206,74 +206,74 @@ ldo4_reg: LDO4 { regulator-name = "VDD_RTC_1.8V"; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-always-on; }; ldo6_reg: LDO6 { regulator-name = "VMIPI_1.8V"; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-always-on; }; ldo7_reg: LDO7 { regulator-name = "VDD_AUD_1.8V"; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; ldo8_reg: LDO8 { regulator-name = "VADC_3.3V"; regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; }; ldo9_reg: LDO9 { regulator-name = "DVDD_SWB_2.8V"; regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; regulator-always-on; }; ldo10_reg: LDO10 { regulator-name = "VDD_PLL_1.1V"; regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; regulator-always-on; }; ldo11_reg: LDO11 { regulator-name = "VDD_AUD_3V"; regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; }; ldo14_reg: LDO14 { regulator-name = "AVDD18_SWB_1.8V"; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-always-on; }; ldo17_reg: LDO17 { regulator-name = "VDD_SWB_3.3V"; regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; ldo21_reg: LDO21 { regulator-name = "VDD_MIF_1.2V"; regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-always-on; }; buck1_reg: BUCK1 { regulator-name = "VDD_ARM_1.2V"; regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; regulator-always-on; regulator-boot-on; }; @@ -281,7 +281,7 @@ buck2_reg: BUCK2 { regulator-name = "VDD_INT_1.1V"; regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; regulator-always-on; regulator-boot-on; }; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 3eb8df319246..9c4ff7521348 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -16,6 +16,7 @@ / { model = "Samsung Trats based on Exynos4210"; compatible = "samsung,trats", "samsung,exynos4210", "samsung,exynos4"; + chassis-type = "handset"; memory@40000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index f052853244a4..9f93e7464aed 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -16,6 +16,7 @@ / { model = "Samsung Universal C210 based on Exynos4210 rev0"; compatible = "samsung,universal_c210", "samsung,exynos4210", "samsung,exynos4"; + chassis-type = "handset"; memory@40000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/exynos4412-i9300.dts b/arch/arm/boot/dts/exynos4412-i9300.dts index 07fbcf845c49..61aca5798f38 100644 --- a/arch/arm/boot/dts/exynos4412-i9300.dts +++ b/arch/arm/boot/dts/exynos4412-i9300.dts @@ -12,6 +12,7 @@ / { model = "Samsung Galaxy S3 (GT-I9300) based on Exynos4412"; compatible = "samsung,i9300", "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; + chassis-type = "handset"; /* bootargs are passed in by bootloader */ diff --git a/arch/arm/boot/dts/exynos4412-i9305.dts b/arch/arm/boot/dts/exynos4412-i9305.dts index 6bc3d897f432..77083f1a8273 100644 --- a/arch/arm/boot/dts/exynos4412-i9305.dts +++ b/arch/arm/boot/dts/exynos4412-i9305.dts @@ -5,6 +5,7 @@ / { model = "Samsung Galaxy S3 (GT-I9305) based on Exynos4412"; compatible = "samsung,i9305", "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; + chassis-type = "handset"; /* bootargs are passed in by bootloader */ diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts index 2c792142605c..9ae05b0d684c 100644 --- a/arch/arm/boot/dts/exynos4412-n710x.dts +++ b/arch/arm/boot/dts/exynos4412-n710x.dts @@ -5,6 +5,7 @@ / { compatible = "samsung,n710x", "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; model = "Samsung Galaxy Note 2 (GT-N7100, GT-N7105) based on Exynos4412"; + chassis-type = "handset"; memory@40000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 5479ef09f9f3..e6aec5facabf 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -382,7 +382,7 @@ buck1_reg: BUCK1 { regulator-name = "VDD_MIF"; regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; regulator-always-on; regulator-boot-on; op_mode = <1>; /* Normal Mode */ @@ -391,7 +391,7 @@ buck2_reg: BUCK2 { regulator-name = "VDD_ARM"; regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; regulator-always-on; regulator-boot-on; op_mode = <1>; /* Normal Mode */ @@ -400,7 +400,7 @@ buck3_reg: BUCK3 { regulator-name = "VDD_INT"; regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-always-on; regulator-boot-on; op_mode = <1>; /* Normal Mode */ @@ -409,7 +409,7 @@ buck4_reg: BUCK4 { regulator-name = "VDD_G3D"; regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; op_mode = <1>; /* Normal Mode */ @@ -418,7 +418,7 @@ buck5_reg: BUCK5 { regulator-name = "VDD_M12"; regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; op_mode = <1>; /* Normal Mode */ @@ -427,7 +427,7 @@ buck6_reg: BUCK6 { regulator-name = "VDD12_5M"; regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; op_mode = <1>; /* Normal Mode */ @@ -436,7 +436,7 @@ buck9_reg: BUCK9 { regulator-name = "VDDF28_EMMC"; regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; regulator-always-on; regulator-boot-on; op_mode = <1>; /* Normal Mode */ diff --git a/arch/arm/boot/dts/exynos4412-p4note-n8010.dts b/arch/arm/boot/dts/exynos4412-p4note-n8010.dts index 9f559425bd2c..0932ec5866cc 100644 --- a/arch/arm/boot/dts/exynos4412-p4note-n8010.dts +++ b/arch/arm/boot/dts/exynos4412-p4note-n8010.dts @@ -12,6 +12,7 @@ / { model = "Samsung Galaxy Note 10.1 (GT-N8010/N8013) based on Exynos4412"; compatible = "samsung,n8010", "samsung,p4note", "samsung,exynos4412", "samsung,exynos4"; + chassis-type = "tablet"; /* this is the base variant without any kind of modem */ }; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 7b447b63007e..3c2d2a7836da 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -15,6 +15,7 @@ / { model = "Samsung Trats 2 based on Exynos4412"; compatible = "samsung,trats2", "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; + chassis-type = "handset"; memory@40000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index a771542e28b8..3583095fbb2a 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -240,9 +240,6 @@ vinl8-supply = <&buck8_reg>; vinl9-supply = <&buck8_reg>; - s5m8767,pmic-buck2-dvs-voltage = <1300000>; - s5m8767,pmic-buck3-dvs-voltage = <1100000>; - s5m8767,pmic-buck4-dvs-voltage = <1200000>; s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>, <&gpd1 1 GPIO_ACTIVE_HIGH>, <&gpd1 2 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts b/arch/arm/boot/dts/exynos5250-snow-rev5.dts index 0822b778c035..f8ca61df6981 100644 --- a/arch/arm/boot/dts/exynos5250-snow-rev5.dts +++ b/arch/arm/boot/dts/exynos5250-snow-rev5.dts @@ -14,6 +14,7 @@ model = "Google Snow Rev 5+"; compatible = "google,snow-rev5", "samsung,exynos5250", "samsung,exynos5"; + chassis-type = "laptop"; sound { compatible = "google,snow-audio-max98090"; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index 9946dce54d74..a630bc654a49 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -12,6 +12,7 @@ model = "Google Snow"; compatible = "google,snow-rev4", "google,snow", "samsung,exynos5250", "samsung,exynos5"; + chassis-type = "laptop"; sound { compatible = "google,snow-audio-max98095"; diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index fba1462b19df..e0feedcf54bb 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -16,6 +16,7 @@ / { model = "Google Spring"; compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5"; + chassis-type = "laptop"; memory@40000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 4ffa9253b566..139778928b93 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -386,7 +386,6 @@ sata: sata@122f0000 { compatible = "snps,dwc-ahci"; - samsung,sata-freq = <66>; reg = <0x122F0000 0x1ff>; interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 315b3dc9c017..e76fb104db19 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -26,6 +26,7 @@ "google,pit-rev7", "google,pit-rev6", "google,pit", "google,peach","samsung,exynos5420", "samsung,exynos5"; + chassis-type = "laptop"; aliases { /* Assign 20 so we don't get confused w/ builtin ones */ diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 0ce3443d39a8..77013ee586f8 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -24,6 +24,7 @@ "google,pi-rev11", "google,pi-rev10", "google,pi", "google,peach", "samsung,exynos5800", "samsung,exynos5"; + chassis-type = "laptop"; aliases { /* Assign 20 so we don't get confused w/ builtin ones */ diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts index c79a2a02dd6b..396149664297 100644 --- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts +++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts @@ -439,24 +439,6 @@ pci@50000000 { status = "okay"; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = - <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ - <0x4800 0 0 2 &pci_intc 1>, - <0x4800 0 0 3 &pci_intc 2>, - <0x4800 0 0 4 &pci_intc 3>, - <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ - <0x5000 0 0 2 &pci_intc 2>, - <0x5000 0 0 3 &pci_intc 3>, - <0x5000 0 0 4 &pci_intc 0>, - <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ - <0x5800 0 0 2 &pci_intc 3>, - <0x5800 0 0 3 &pci_intc 0>, - <0x5800 0 0 4 &pci_intc 1>, - <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ - <0x6000 0 0 2 &pci_intc 0>, - <0x6000 0 0 3 &pci_intc 1>, - <0x6000 0 0 4 &pci_intc 2>; }; ethernet@60000000 { diff --git a/arch/arm/boot/dts/gemini-ns2502.dts b/arch/arm/boot/dts/gemini-ns2502.dts new file mode 100644 index 000000000000..704abd212df5 --- /dev/null +++ b/arch/arm/boot/dts/gemini-ns2502.dts @@ -0,0 +1,148 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com> + * Device Tree file for Edimax NS 2502 + */ + +/dts-v1/; + +#include "gemini.dtsi" + +/ { + model = "Edimax NS-2502"; + compatible = "edimax,ns-2502", "cortina,gemini"; + #address-cells = <1>; + #size-cells = <1>; + + memory@0 { + /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + aliases { + mdio-gpio0 = &mdio0; + }; + + chosen { + bootargs = "console=ttyS0,19200n8"; + stdout-path = &uart0; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ + <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + /* We lack the knowledge of necessary GPIO to achieve + * Gigabit + */ + max-speed = <100>; + }; + }; +}; + +ðernet { + status = "okay"; + ethernet-port@0 { + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; +}; + +&flash { + status = "okay"; + /* 8MB of flash */ + reg = <0x30000000 0x00800000>; + + pinctrl-names = "enabled", "disabled"; + pinctrl-0 = <&pflash_default_pins>; + pinctrl-1 = <&pflash_disabled_pins>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "RedBoot"; + reg = <0x00000000 0x00020000>; + }; + partition@20000 { + label = "kernel"; + reg = <0x00020000 0x00700000>; + }; + partition@720000 { + label = "VCTL"; + reg = <0x00720000 0x00020000>; + }; + partition@740000 { + label = "CurConf"; + reg = <0x00740000 0x000a0000>; + }; + partition@7e0000 { + label = "FIS"; + reg = <0x007e0000 0x00010000>; + }; + }; +}; + +&gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_default_pins>; +}; + +&ide0 { + status = "okay"; +}; + +&ide1 { + status = "okay"; +}; + +&sata { + cortina,gemini-ata-muxmode = <3>; + cortina,gemini-enable-sata-bridge; + status = "okay"; +}; + +&syscon { + pinctrl { + /* + * gpio0agrp cover line 0-4 + * gpio0bgrp cover line 5 + */ + gpio0_default_pins: pinctrl-gpio0 { + mux { + function = "gpio0"; + groups = "gpio0agrp", "gpio0bgrp", "gpio0hgrp"; + }; + }; + pflash_disabled_pins: pinctrl-pflash-disabled { + mux { + function = "gpio0"; + groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp", + "gpio0kgrp"; + }; + }; + pinctrl-gmii { + mux { + function = "gmii"; + groups = "gmii_gmac0_grp"; + }; + }; + }; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/gemini-sl93512r.dts b/arch/arm/boot/dts/gemini-sl93512r.dts index c78e55fd2562..91c19e8ebfe8 100644 --- a/arch/arm/boot/dts/gemini-sl93512r.dts +++ b/arch/arm/boot/dts/gemini-sl93512r.dts @@ -256,24 +256,6 @@ pci@50000000 { status = "okay"; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = - <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ - <0x4800 0 0 2 &pci_intc 1>, - <0x4800 0 0 3 &pci_intc 2>, - <0x4800 0 0 4 &pci_intc 3>, - <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ - <0x5000 0 0 2 &pci_intc 2>, - <0x5000 0 0 3 &pci_intc 3>, - <0x5000 0 0 4 &pci_intc 0>, - <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ - <0x5800 0 0 2 &pci_intc 3>, - <0x5800 0 0 3 &pci_intc 0>, - <0x5800 0 0 4 &pci_intc 1>, - <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ - <0x6000 0 0 2 &pci_intc 0>, - <0x6000 0 0 3 &pci_intc 1>, - <0x6000 0 0 4 &pci_intc 2>; }; ethernet@60000000 { diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts index 1b64cc80b55a..d0efd76695da 100644 --- a/arch/arm/boot/dts/gemini-sq201.dts +++ b/arch/arm/boot/dts/gemini-sq201.dts @@ -252,24 +252,6 @@ pci@50000000 { status = "okay"; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = - <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ - <0x4800 0 0 2 &pci_intc 1>, - <0x4800 0 0 3 &pci_intc 2>, - <0x4800 0 0 4 &pci_intc 3>, - <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ - <0x5000 0 0 2 &pci_intc 2>, - <0x5000 0 0 3 &pci_intc 3>, - <0x5000 0 0 4 &pci_intc 0>, - <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ - <0x5800 0 0 2 &pci_intc 3>, - <0x5800 0 0 3 &pci_intc 0>, - <0x5800 0 0 4 &pci_intc 1>, - <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ - <0x6000 0 0 2 &pci_intc 0>, - <0x6000 0 0 3 &pci_intc 1>, - <0x6000 0 0 4 &pci_intc 2>; }; ethernet@60000000 { diff --git a/arch/arm/boot/dts/gemini-ssi1328.dts b/arch/arm/boot/dts/gemini-ssi1328.dts new file mode 100644 index 000000000000..2b3e7db84fed --- /dev/null +++ b/arch/arm/boot/dts/gemini-ssi1328.dts @@ -0,0 +1,138 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com> + * Device Tree file for SSI 1328 + */ + +/dts-v1/; + +#include "gemini.dtsi" + +/ { + model = "SSI 1328"; + compatible = "ssi,1328", "cortina,gemini"; + #address-cells = <1>; + #size-cells = <1>; + + memory@0 { + /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + aliases { + mdio-gpio0 = &mdio0; + }; + + chosen { + bootargs = "console=ttyS0,19200n8 initrd=0x900000,9M"; + stdout-path = &uart0; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ + <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ + #address-cells = <1>; + #size-cells = <0>; + + /* LAN Marvell 88E1118 */ + phy0: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + /* We lack the knowledge of necessary GPIO to achieve + * Gigabit + */ + max-speed = <100>; + }; + /* WAN ICPlus IP101A */ + phy1: ethernet-phy@2 { + reg = <2>; + device_type = "ethernet-phy"; + }; + }; +}; + +ðernet { + status = "okay"; + ethernet-port@0 { + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + ethernet-port@1 { + phy-mode = "rgmii"; + phy-handle = <&phy1>; + }; +}; + +&flash { + status = "okay"; + /* 32MB of flash */ + reg = <0x30000000 0x03200000>; + + pinctrl-names = "enabled", "disabled"; + pinctrl-0 = <&pflash_default_pins>; + pinctrl-1 = <&pflash_disabled_pins>; + + partitions { + compatible = "redboot-fis"; + /* Eraseblock at 0xfe0000 */ + fis-index-block = <0x7F>; + }; +}; + +&gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_default_pins>; +}; + +&ide0 { + status = "okay"; +}; + +&ide1 { + status = "okay"; +}; + +&sata { + cortina,gemini-ata-muxmode = <0>; + cortina,gemini-enable-sata-bridge; + status = "okay"; +}; + +&syscon { + pinctrl { + /* + * gpio0agrp cover line 0-4 + * gpio0bgrp cover line 5 + */ + gpio0_default_pins: pinctrl-gpio0 { + mux { + function = "gpio0"; + groups = "gpio0agrp", "gpio0bgrp"; + }; + }; + pflash_disabled_pins: pinctrl-pflash-disabled { + mux { + function = "gpio0"; + groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp", + "gpio0kgrp"; + }; + }; + pinctrl-gmii { + /* This platform use both the ethernet ports */ + mux { + function = "gmii"; + groups = "gmii_gmac0_grp", "gmii_gmac1_grp"; + }; + }; + }; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/gemini-wbd111.dts b/arch/arm/boot/dts/gemini-wbd111.dts index 5602ba8f30f2..de3c4416b0fb 100644 --- a/arch/arm/boot/dts/gemini-wbd111.dts +++ b/arch/arm/boot/dts/gemini-wbd111.dts @@ -140,24 +140,6 @@ pci@50000000 { status = "okay"; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = - <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ - <0x4800 0 0 2 &pci_intc 1>, - <0x4800 0 0 3 &pci_intc 2>, - <0x4800 0 0 4 &pci_intc 3>, - <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ - <0x5000 0 0 2 &pci_intc 2>, - <0x5000 0 0 3 &pci_intc 3>, - <0x5000 0 0 4 &pci_intc 0>, - <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ - <0x5800 0 0 2 &pci_intc 3>, - <0x5800 0 0 3 &pci_intc 0>, - <0x5800 0 0 4 &pci_intc 1>, - <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ - <0x6000 0 0 2 &pci_intc 0>, - <0x6000 0 0 3 &pci_intc 1>, - <0x6000 0 0 4 &pci_intc 2>; }; ethernet@60000000 { diff --git a/arch/arm/boot/dts/gemini-wbd222.dts b/arch/arm/boot/dts/gemini-wbd222.dts index a4a260c36d75..e5ceaadbcc1a 100644 --- a/arch/arm/boot/dts/gemini-wbd222.dts +++ b/arch/arm/boot/dts/gemini-wbd222.dts @@ -151,24 +151,6 @@ pci@50000000 { status = "okay"; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = - <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ - <0x4800 0 0 2 &pci_intc 1>, - <0x4800 0 0 3 &pci_intc 2>, - <0x4800 0 0 4 &pci_intc 3>, - <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ - <0x5000 0 0 2 &pci_intc 2>, - <0x5000 0 0 3 &pci_intc 3>, - <0x5000 0 0 4 &pci_intc 0>, - <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ - <0x5800 0 0 2 &pci_intc 3>, - <0x5800 0 0 3 &pci_intc 0>, - <0x5800 0 0 4 &pci_intc 1>, - <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ - <0x6000 0 0 2 &pci_intc 0>, - <0x6000 0 0 3 &pci_intc 1>, - <0x6000 0 0 4 &pci_intc 2>; }; ethernet@60000000 { diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi index cc053af3c347..e836bd0818d4 100644 --- a/arch/arm/boot/dts/gemini.dtsi +++ b/arch/arm/boot/dts/gemini.dtsi @@ -16,7 +16,7 @@ compatible = "simple-bus"; interrupt-parent = <&intcon>; - flash@30000000 { + flash: flash@30000000 { compatible = "cortina,gemini-flash", "cfi-flash"; syscon = <&syscon>; pinctrl-names = "default"; @@ -289,9 +289,28 @@ device_type = "pci"; #address-cells = <3>; #size-cells = <2>; - #interrupt-cells = <1>; status = "disabled"; + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = + <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ + <0x4800 0 0 2 &pci_intc 1>, + <0x4800 0 0 3 &pci_intc 2>, + <0x4800 0 0 4 &pci_intc 3>, + <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ + <0x5000 0 0 2 &pci_intc 2>, + <0x5000 0 0 3 &pci_intc 3>, + <0x5000 0 0 4 &pci_intc 0>, + <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ + <0x5800 0 0 2 &pci_intc 3>, + <0x5800 0 0 3 &pci_intc 0>, + <0x5800 0 0 4 &pci_intc 1>, + <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ + <0x6000 0 0 2 &pci_intc 0>, + <0x6000 0 0 3 &pci_intc 1>, + <0x6000 0 0 4 &pci_intc 2>; + bus-range = <0x00 0xff>; /* PCI ranges mappings */ ranges = @@ -322,7 +341,7 @@ }; }; - ethernet@60000000 { + ethernet: ethernet@60000000 { compatible = "cortina,gemini-ethernet"; reg = <0x60000000 0x4000>, /* Global registers, queue */ <0x60004000 0x2000>, /* V-bit */ @@ -365,7 +384,7 @@ clocks = <&syscon GEMINI_CLK_GATE_SECURITY>; }; - ide@63000000 { + ide0: ide@63000000 { compatible = "cortina,gemini-pata", "faraday,ftide010"; reg = <0x63000000 0x1000>; interrupts = <4 IRQ_TYPE_EDGE_RISING>; @@ -378,7 +397,7 @@ #size-cells = <0>; }; - ide@63400000 { + ide1: ide@63400000 { compatible = "cortina,gemini-pata", "faraday,ftide010"; reg = <0x63400000 0x1000>; interrupts = <5 IRQ_TYPE_EDGE_RISING>; @@ -421,7 +440,7 @@ status = "disabled"; }; - usb@68000000 { + usb0: usb@68000000 { compatible = "cortina,gemini-usb", "faraday,fotg210"; reg = <0x68000000 0x1000>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; @@ -442,7 +461,7 @@ status = "disabled"; }; - usb@69000000 { + usb1: usb@69000000 { compatible = "cortina,gemini-usb", "faraday,fotg210"; reg = <0x69000000 0x1000>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx6dl-alti6p.dts b/arch/arm/boot/dts/imx6dl-alti6p.dts index 4329b372d8cb..e8325fd680d9 100644 --- a/arch/arm/boot/dts/imx6dl-alti6p.dts +++ b/arch/arm/boot/dts/imx6dl-alti6p.dts @@ -192,7 +192,7 @@ }; &ecspi1 { - cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi b/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi index a326a331508e..f028b6a191df 100644 --- a/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi +++ b/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi @@ -47,7 +47,6 @@ mpl3115a2: pressure-sensor@60 { compatible = "fsl,mpl3115"; reg = <0x60>; - vcc-supply = <®_3v3_acm>; /* * The MPL3115 interrupts are connected to pin 22 and 23 diff --git a/arch/arm/boot/dts/imx6dl-prtrvt.dts b/arch/arm/boot/dts/imx6dl-prtrvt.dts index 5ac84445e9cc..56bb1ca56a2d 100644 --- a/arch/arm/boot/dts/imx6dl-prtrvt.dts +++ b/arch/arm/boot/dts/imx6dl-prtrvt.dts @@ -67,11 +67,9 @@ ti,enable-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>, <&gpio5 11 GPIO_ACTIVE_LOW>; vin-supply = <®_3v3>; - vin-voltage-override = <3100000>; autosuspend-delay = <30000>; irq-status-read-quirk; en2-rf-quirk; - t5t-rmb-extra-byte-quirk; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts b/arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts index 667b8faa1807..b12b5aabe70a 100644 --- a/arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts +++ b/arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts @@ -6,6 +6,7 @@ #include "imx6dl.dtsi" #include "imx6qdl-skov-cpu.dtsi" #include "imx6qdl-skov-cpu-revc.dtsi" +#include "imx6qdl-skov-revc-lt2.dtsi" / { model = "SKOV IMX6 CPU SoloCore"; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi index e5c4dc65fbab..674af39c884a 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi @@ -296,14 +296,6 @@ reg = <2>; color = <LED_COLOR_ID_BLUE>; }; - - chan@3 { - chan-name = "W"; - led-cur = /bits/ 8 <0x0>; - max-cur = /bits/ 8 <0x0>; - reg = <3>; - color = <LED_COLOR_ID_WHITE>; - }; }; eeprom@57 { diff --git a/arch/arm/boot/dts/imx6q-skov-revc-lt2.dts b/arch/arm/boot/dts/imx6q-skov-revc-lt2.dts index f00add7b3048..ff97d22eb09f 100644 --- a/arch/arm/boot/dts/imx6q-skov-revc-lt2.dts +++ b/arch/arm/boot/dts/imx6q-skov-revc-lt2.dts @@ -6,6 +6,7 @@ #include "imx6q.dtsi" #include "imx6qdl-skov-cpu.dtsi" #include "imx6qdl-skov-cpu-revc.dtsi" +#include "imx6qdl-skov-revc-lt2.dtsi" / { model = "SKOV IMX6 CPU QuadCore"; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index 30fa349f9d05..ed2739e39085 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -310,10 +310,10 @@ st,mod-12b = <1>; /* internal ADC reference */ st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ + /* ADC conversion time: 80 clocks */ st,sample-time = <4>; - stmpe_touchscreen { + stmpe_touchscreen: stmpe-touchscreen { compatible = "st,stmpe-ts"; /* 8 sample average control */ st,ave-ctrl = <3>; @@ -330,10 +330,11 @@ st,touch-det-delay = <5>; }; - stmpe_adc { + stmpe_adc: stmpe-adc { compatible = "st,stmpe-adc"; /* forbid to use ADC channels 3-0 (touch) */ st,norequest-mask = <0x0F>; + #io-channel-cells = <1>; }; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi index 019938562aa9..120d6e997a4c 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi @@ -145,8 +145,11 @@ }; &i2c1 { - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; clock-frequency = <400000>; status = "disabled"; @@ -185,8 +188,11 @@ }; &i2c2 { - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; clock-frequency = <100000>; status = "disabled"; }; @@ -256,6 +262,7 @@ pinctrl-0 = <&pinctrl_usdhc1>; cd-gpios = <&gpio6 31 GPIO_ACTIVE_LOW>; no-1-8-v; + disable-wp; status = "disabled"; }; @@ -299,6 +306,20 @@ >; }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b1 + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b1 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 @@ -306,10 +327,10 @@ >; }; - pinctrl_i2c1: i2c1grp { + pinctrl_i2c2_gpio: i2c2gpiogrp { fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1 + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi index a80aa08a37cb..94b254bfd054 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi @@ -78,8 +78,11 @@ }; &i2c3 { - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + scl-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; clock-frequency = <400000>; status = "okay"; @@ -259,6 +262,13 @@ >; }; + pinctrl_i2c3_gpio: i2c3gpiogrp { + fsl,pins = < + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1 + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b8b1 + >; + }; + pinctrl_ecspi1: ecspi1grp { fsl,pins = < MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 diff --git a/arch/arm/boot/dts/imx6qdl-skov-revc-lt2.dtsi b/arch/arm/boot/dts/imx6qdl-skov-revc-lt2.dtsi new file mode 100644 index 000000000000..48c9ce051f47 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-skov-revc-lt2.dtsi @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright (C) 2021 Pengutronix, Oleksij Rempel <kernel@pengutronix.de> + +/ { + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + enable-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>; + pwms = <&pwm2 0 20000 0>; + brightness-levels = <0 255>; + num-interpolated-steps = <17>; + default-brightness-level = <8>; + power-supply = <®_24v0>; + }; + + display { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "fsl,imx-parallel-display"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1>; + + port@0 { + reg = <0>; + + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + display0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + panel { + compatible = "logictechno,lttd800480070-l2rt"; + backlight = <&backlight>; + power-supply = <®_3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <&display0_out>; + }; + }; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display0_in>; +}; + +&iomuxc { + pinctrl_backlight: backlightgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x58 + >; + }; + + pinctrl_ipu1: ipu1grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-tqma6.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6.dtsi index b18b83ac6aee..51a3a5392c95 100644 --- a/arch/arm/boot/dts/imx6qdl-tqma6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tqma6.dtsi @@ -20,7 +20,7 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; status = "okay"; m25p80: flash@0 { diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 89c342f3a7c2..f5de5def876d 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -264,7 +264,7 @@ }; pcie: pcie@1ffc000 { - compatible = "fsl,imx6q-pcie", "snps,dw-pcie"; + compatible = "fsl,imx6q-pcie"; reg = <0x01ffc000 0x04000>, <0x01f00000 0x80000>; reg-names = "dbi", "config"; @@ -272,10 +272,9 @@ #size-cells = <2>; device_type = "pci"; bus-range = <0x00 0xff>; - ranges = <0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */ + ranges = <0x81000000 0 0 0x01f80000 0 0x00010000>, /* downstream I/O */ + <0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */ num-lanes = <1>; - num-viewport = <4>; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/imx6qp-prtwd3.dts b/arch/arm/boot/dts/imx6qp-prtwd3.dts index b92e0f2748a5..7648e8a02000 100644 --- a/arch/arm/boot/dts/imx6qp-prtwd3.dts +++ b/arch/arm/boot/dts/imx6qp-prtwd3.dts @@ -123,7 +123,7 @@ }; &ecspi2 { - cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; status = "okay"; @@ -189,7 +189,7 @@ }; &ecspi3 { - cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi index b310f13a53f2..050365513836 100644 --- a/arch/arm/boot/dts/imx6qp.dtsi +++ b/arch/arm/boot/dts/imx6qp.dtsi @@ -110,5 +110,5 @@ }; &pcie { - compatible = "fsl,imx6qp-pcie", "snps,dw-pcie"; + compatible = "fsl,imx6qp-pcie"; }; diff --git a/arch/arm/boot/dts/imx6sl-tolino-vision5.dts b/arch/arm/boot/dts/imx6sl-tolino-vision5.dts new file mode 100644 index 000000000000..ff6118df3946 --- /dev/null +++ b/arch/arm/boot/dts/imx6sl-tolino-vision5.dts @@ -0,0 +1,349 @@ +// SPDX-License-Identifier: (GPL-2.0) +/* + * Device tree for the Tolino Vision 5 ebook reader + * + * Name on mainboard is: 37NB-E70K0M+6A3 + * Serials start with: E70K02 (a number also seen in + * vendor kernel sources) + * + * This mainboard seems to be equipped with different SoCs. + * In the Tolino Vision 5 ebook reader it is a i.MX6SL + * + * Copyright 2021 Andreas Kemnade + * based on works + * Copyright 2016 Freescale Semiconductor, Inc. + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include "imx6sl.dtsi" +#include "e70k02.dtsi" + +/ { + model = "Tolino Vision 5"; + compatible = "kobo,tolino-vision5", "fsl,imx6sl"; +}; + +&gpio_keys { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; +}; + +&i2c1 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_sleep>; +}; + +&i2c2 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_sleep>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_gpio_keys: gpio-keysgrp { + fsl,pins = < + MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25 0x17059 /* PWR_SW */ + MX6SL_PAD_FEC_MDC__GPIO4_IO23 0x17059 /* HALL_EN */ + MX6SL_PAD_KEY_COL4__GPIO4_IO00 0x17059 /* PAGE_UP */ + MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x17059 /* PAGE_DOWN */ + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX6SL_PAD_LCD_DAT1__GPIO2_IO21 0x79 + MX6SL_PAD_LCD_DAT4__GPIO2_IO24 0x79 + MX6SL_PAD_LCD_DAT5__GPIO2_IO25 0x79 + MX6SL_PAD_LCD_DAT6__GPIO2_IO26 0x79 + MX6SL_PAD_LCD_DAT7__GPIO2_IO27 0x79 + MX6SL_PAD_LCD_DAT8__GPIO2_IO28 0x79 + MX6SL_PAD_LCD_DAT9__GPIO2_IO29 0x79 + MX6SL_PAD_LCD_DAT10__GPIO2_IO30 0x79 + MX6SL_PAD_LCD_DAT11__GPIO2_IO31 0x79 + MX6SL_PAD_LCD_DAT12__GPIO3_IO00 0x79 + MX6SL_PAD_LCD_DAT13__GPIO3_IO01 0x79 + MX6SL_PAD_LCD_DAT14__GPIO3_IO02 0x79 + MX6SL_PAD_LCD_DAT15__GPIO3_IO03 0x79 + MX6SL_PAD_LCD_DAT16__GPIO3_IO04 0x79 + MX6SL_PAD_LCD_DAT17__GPIO3_IO05 0x79 + MX6SL_PAD_LCD_DAT18__GPIO3_IO06 0x79 + MX6SL_PAD_LCD_DAT19__GPIO3_IO07 0x79 + MX6SL_PAD_LCD_DAT20__GPIO3_IO08 0x79 + MX6SL_PAD_LCD_DAT21__GPIO3_IO09 0x79 + MX6SL_PAD_LCD_DAT22__GPIO3_IO10 0x79 + MX6SL_PAD_LCD_DAT23__GPIO3_IO11 0x79 + MX6SL_PAD_LCD_CLK__GPIO2_IO15 0x79 + MX6SL_PAD_LCD_ENABLE__GPIO2_IO16 0x79 + MX6SL_PAD_LCD_HSYNC__GPIO2_IO17 0x79 + MX6SL_PAD_LCD_VSYNC__GPIO2_IO18 0x79 + MX6SL_PAD_LCD_RESET__GPIO2_IO19 0x79 + MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21 0x79 + MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26 0x79 + MX6SL_PAD_KEY_COL3__GPIO3_IO30 0x79 + MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x79 + MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x79 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001f8b1 + MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c1_sleep: i2c1grp-sleep { + fsl,pins = < + MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x400108b1 + MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x400108b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x4001f8b1 + MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c2_sleep: i2c2grp-sleep { + fsl,pins = < + MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x400108b1 + MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x400108b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6SL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1 + MX6SL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6SL_PAD_FEC_RXD0__GPIO4_IO17 0x10059 + >; + }; + + pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp { + fsl,pins = < + MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059 /* HWEN */ + >; + }; + + pinctrl_ricoh_gpio: ricoh-gpiogrp { + fsl,pins = < + MX6SL_PAD_FEC_MDIO__GPIO4_IO20 0x1b8b1 /* ricoh619 chg */ + MX6SL_PAD_FEC_RX_ER__GPIO4_IO19 0x1b8b1 /* ricoh619 irq */ + MX6SL_PAD_KEY_COL2__GPIO3_IO28 0x1b8b1 /* ricoh619 bat_low_int */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1 + MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6SL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6SL_PAD_SD1_CLK__SD1_CLK 0x17059 + MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x17059 + MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x17059 + MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x17059 + MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX6SL_PAD_SD1_CMD__SD1_CMD 0x170b9 + MX6SL_PAD_SD1_CLK__SD1_CLK 0x170b9 + MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170b9 + MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170b9 + MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170b9 + MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170b9 + MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170b9 + MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170b9 + MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170b9 + MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX6SL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6SL_PAD_SD1_CLK__SD1_CLK 0x170f9 + MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 + MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 + MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 + MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 + MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170b9 + MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170b9 + MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170b9 + MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc1_sleep: usdhc1-sleepgrp { + fsl,pins = < + MX6SL_PAD_SD1_CMD__SD1_CMD 0x10059 + MX6SL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x10059 + MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x10059 + MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x10059 + MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x10059 + MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x10059 + MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x10059 + MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x10059 + MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x10059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x11059 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x11059 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x11059 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x11059 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x11059 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x11059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x170b9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x170f9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc3_sleep: usdhc3-sleepgrp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__GPIO5_IO21 0x100c1 + MX6SL_PAD_SD3_CLK__GPIO5_IO18 0x100c1 + MX6SL_PAD_SD3_DAT0__GPIO5_IO19 0x100c1 + MX6SL_PAD_SD3_DAT1__GPIO5_IO20 0x100c1 + MX6SL_PAD_SD3_DAT2__GPIO5_IO16 0x100c1 + MX6SL_PAD_SD3_DAT3__GPIO5_IO17 0x100c1 + >; + }; + + pinctrl_wifi_power: wifi-powergrp { + fsl,pins = < + MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x10059 /* WIFI_3V3_ON */ + >; + }; + + pinctrl_wifi_reset: wifi-resetgrp { + fsl,pins = < + MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x10059 /* WIFI_RST */ + >; + }; +}; + +&leds { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; +}; + +&lm3630a { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>; +}; + +®_wifi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_power>; +}; + +®_vdd1p1 { + vin-supply = <&dcdc2_reg>; +}; + +®_vdd2p5 { + vin-supply = <&dcdc2_reg>; +}; + +®_arm { + vin-supply = <&dcdc3_reg>; +}; + +®_soc { + vin-supply = <&dcdc1_reg>; +}; + +®_pu { + vin-supply = <&dcdc1_reg>; +}; + +&ricoh619 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ricoh_gpio>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + pinctrl-3 = <&pinctrl_usdhc1_sleep>; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + pinctrl-3 = <&pinctrl_usdhc3_sleep>; +}; + +&wifi_pwrseq { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_reset>; +}; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 997b96c1c47b..c7d907c5c352 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -55,18 +55,16 @@ device_type = "cpu"; reg = <0x0>; next-level-cache = <&L2>; - operating-points = < + operating-points = /* kHz uV */ - 996000 1275000 - 792000 1175000 - 396000 975000 - >; - fsl,soc-operating-points = < + <996000 1275000>, + <792000 1175000>, + <396000 975000>; + fsl,soc-operating-points = /* ARM kHz SOC-PU uV */ - 996000 1225000 - 792000 1175000 - 396000 1175000 - >; + <996000 1225000>, + <792000 1175000>, + <396000 1175000>; clock-latency = <61036>; /* two CLK32 periods */ #cooling-cells = <2>; clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>, diff --git a/arch/arm/boot/dts/imx6sll-kobo-librah2o.dts b/arch/arm/boot/dts/imx6sll-kobo-librah2o.dts new file mode 100644 index 000000000000..a8b0e88064d9 --- /dev/null +++ b/arch/arm/boot/dts/imx6sll-kobo-librah2o.dts @@ -0,0 +1,339 @@ +// SPDX-License-Identifier: (GPL-2.0) +/* + * Device tree for the Kobo Libra H2O ebook reader + * + * Name on mainboard is: 37NB-E70K0M+6A3 + * Serials start with: E70K02 (a number also seen in + * vendor kernel sources) + * + * This mainboard seems to be equipped with different SoCs. + * In the Kobo Libra H2O ebook reader it is an i.MX6SLL + * + * Copyright 2021 Andreas Kemnade + * based on works + * Copyright 2016 Freescale Semiconductor, Inc. + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include "imx6sll.dtsi" +#include "e70k02.dtsi" + +/ { + model = "Kobo Libra H2O"; + compatible = "kobo,librah2o", "fsl,imx6sll"; +}; + +&clks { + assigned-clocks = <&clks IMX6SLL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <393216000>; +}; + +&cpu0 { + arm-supply = <&dcdc3_reg>; + soc-supply = <&dcdc1_reg>; +}; + +&gpio_keys { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; +}; + +&i2c1 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_sleep>; +}; + +&i2c2 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_sleep>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_gpio_keys: gpio-keysgrp { + fsl,pins = < + MX6SLL_PAD_GPIO4_IO25__GPIO4_IO25 0x17059 /* PWR_SW */ + MX6SLL_PAD_GPIO4_IO23__GPIO4_IO23 0x17059 /* HALL_EN */ + MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059 /* PAGE_UP */ + MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059 /* PAGE_DOWN */ + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX6SLL_PAD_LCD_DATA01__GPIO2_IO21 0x79 + MX6SLL_PAD_LCD_DATA04__GPIO2_IO24 0x79 + MX6SLL_PAD_LCD_DATA05__GPIO2_IO25 0x79 + MX6SLL_PAD_LCD_DATA06__GPIO2_IO26 0x79 + MX6SLL_PAD_LCD_DATA07__GPIO2_IO27 0x79 + MX6SLL_PAD_LCD_DATA08__GPIO2_IO28 0x79 + MX6SLL_PAD_LCD_DATA09__GPIO2_IO29 0x79 + MX6SLL_PAD_LCD_DATA10__GPIO2_IO30 0x79 + MX6SLL_PAD_LCD_DATA11__GPIO2_IO31 0x79 + MX6SLL_PAD_LCD_DATA12__GPIO3_IO00 0x79 + MX6SLL_PAD_LCD_DATA13__GPIO3_IO01 0x79 + MX6SLL_PAD_LCD_DATA14__GPIO3_IO02 0x79 + MX6SLL_PAD_LCD_DATA15__GPIO3_IO03 0x79 + MX6SLL_PAD_LCD_DATA16__GPIO3_IO04 0x79 + MX6SLL_PAD_LCD_DATA17__GPIO3_IO05 0x79 + MX6SLL_PAD_LCD_DATA18__GPIO3_IO06 0x79 + MX6SLL_PAD_LCD_DATA19__GPIO3_IO07 0x79 + MX6SLL_PAD_LCD_DATA20__GPIO3_IO08 0x79 + MX6SLL_PAD_LCD_DATA21__GPIO3_IO09 0x79 + MX6SLL_PAD_LCD_DATA22__GPIO3_IO10 0x79 + MX6SLL_PAD_LCD_DATA23__GPIO3_IO11 0x79 + MX6SLL_PAD_LCD_CLK__GPIO2_IO15 0x79 + MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16 0x79 + MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17 0x79 + MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18 0x79 + MX6SLL_PAD_LCD_RESET__GPIO2_IO19 0x79 + MX6SLL_PAD_GPIO4_IO21__GPIO4_IO21 0x79 + MX6SLL_PAD_GPIO4_IO26__GPIO4_IO26 0x79 + MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x79 + MX6SLL_PAD_KEY_ROW7__GPIO4_IO07 0x79 + MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x79 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x4001f8b1 + MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c1_sleep: i2c1grp-sleep { + fsl,pins = < + MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x400108b1 + MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x400108b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6SLL_PAD_I2C2_SCL__I2C2_SCL 0x4001f8b1 + MX6SLL_PAD_I2C2_SDA__I2C2_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c2_sleep: i2c2grp-sleep { + fsl,pins = < + MX6SLL_PAD_I2C2_SCL__I2C2_SCL 0x400108b1 + MX6SLL_PAD_I2C2_SDA__I2C2_SDA 0x400108b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6SLL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1 + MX6SLL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6SLL_PAD_GPIO4_IO17__GPIO4_IO17 0x10059 + >; + }; + + pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp { + fsl,pins = < + MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10 0x10059 /* HWEN */ + >; + }; + + pinctrl_ricoh_gpio: ricoh-gpiogrp { + fsl,pins = < + MX6SLL_PAD_GPIO4_IO20__GPIO4_IO20 0x1b8b1 /* ricoh619 chg */ + MX6SLL_PAD_GPIO4_IO19__GPIO4_IO19 0x1b8b1 /* ricoh619 irq */ + MX6SLL_PAD_KEY_COL2__GPIO3_IO28 0x1b8b1 /* ricoh619 bat_low_int */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1 + MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x17059 + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x17059 + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x17059 + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x17059 + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x17059 + MX6SLL_PAD_SD1_DATA4__SD1_DATA4 0x17059 + MX6SLL_PAD_SD1_DATA5__SD1_DATA5 0x17059 + MX6SLL_PAD_SD1_DATA6__SD1_DATA6 0x17059 + MX6SLL_PAD_SD1_DATA7__SD1_DATA7 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170b9 + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x170b9 + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170b9 + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170b9 + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170b9 + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170b9 + MX6SLL_PAD_SD1_DATA4__SD1_DATA4 0x170b9 + MX6SLL_PAD_SD1_DATA5__SD1_DATA5 0x170b9 + MX6SLL_PAD_SD1_DATA6__SD1_DATA6 0x170b9 + MX6SLL_PAD_SD1_DATA7__SD1_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x170f9 + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170f9 + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170f9 + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170f9 + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170f9 + MX6SLL_PAD_SD1_DATA4__SD1_DATA4 0x170b9 + MX6SLL_PAD_SD1_DATA5__SD1_DATA5 0x170b9 + MX6SLL_PAD_SD1_DATA6__SD1_DATA6 0x170b9 + MX6SLL_PAD_SD1_DATA7__SD1_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc1_sleep: usdhc1-sleepgrp { + fsl,pins = < + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x10059 + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x10059 + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x10059 + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x10059 + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x10059 + MX6SLL_PAD_SD1_DATA4__SD1_DATA4 0x10059 + MX6SLL_PAD_SD1_DATA5__SD1_DATA5 0x10059 + MX6SLL_PAD_SD1_DATA6__SD1_DATA6 0x10059 + MX6SLL_PAD_SD1_DATA7__SD1_DATA7 0x10059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__SD3_CMD 0x11059 + MX6SLL_PAD_SD3_CLK__SD3_CLK 0x11059 + MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x11059 + MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x11059 + MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x11059 + MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x11059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6SLL_PAD_SD3_CLK__SD3_CLK 0x170b9 + MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170b9 + MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170b9 + MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170b9 + MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6SLL_PAD_SD3_CLK__SD3_CLK 0x170f9 + MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170f9 + MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170f9 + MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170f9 + MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc3_sleep: usdhc3-sleepgrp { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__GPIO5_IO21 0x100c1 + MX6SLL_PAD_SD3_CLK__GPIO5_IO18 0x100c1 + MX6SLL_PAD_SD3_DATA0__GPIO5_IO19 0x100c1 + MX6SLL_PAD_SD3_DATA1__GPIO5_IO20 0x100c1 + MX6SLL_PAD_SD3_DATA2__GPIO5_IO16 0x100c1 + MX6SLL_PAD_SD3_DATA3__GPIO5_IO17 0x100c1 + >; + }; + + pinctrl_wifi_power: wifi-powergrp { + fsl,pins = < + MX6SLL_PAD_SD2_DATA6__GPIO4_IO29 0x10059 /* WIFI_3V3_ON */ + >; + }; + + pinctrl_wifi_reset: wifi-resetgrp { + fsl,pins = < + MX6SLL_PAD_SD2_DATA7__GPIO5_IO00 0x10059 /* WIFI_RST */ + >; + }; +}; + +&leds { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; +}; + +&lm3630a { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>; +}; + +®_wifi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_power>; +}; + +&ricoh619 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ricoh_gpio>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + pinctrl-3 = <&pinctrl_usdhc1_sleep>; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + pinctrl-3 = <&pinctrl_usdhc3_sleep>; +}; + +&wifi_pwrseq { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_reset>; +}; diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi index 04f8d637a501..d4a000c3dde7 100644 --- a/arch/arm/boot/dts/imx6sll.dtsi +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -51,20 +51,18 @@ device_type = "cpu"; reg = <0>; next-level-cache = <&L2>; - operating-points = < + operating-points = /* kHz uV */ - 996000 1275000 - 792000 1175000 - 396000 1075000 - 198000 975000 - >; - fsl,soc-operating-points = < + <996000 1275000>, + <792000 1175000>, + <396000 1075000>, + <198000 975000>; + fsl,soc-operating-points = /* ARM kHz SOC-PU uV */ - 996000 1175000 - 792000 1175000 - 396000 1175000 - 198000 1175000 - >; + <996000 1175000>, + <792000 1175000>, + <396000 1175000>, + <198000 1175000>; clock-latency = <61036>; /* two CLK32 periods */ #cooling-cells = <2>; clocks = <&clks IMX6SLL_CLK_ARM>, diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 8516730778df..fc6334336b3d 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -1395,15 +1395,15 @@ }; pcie: pcie@8ffc000 { - compatible = "fsl,imx6sx-pcie", "snps,dw-pcie"; + compatible = "fsl,imx6sx-pcie"; reg = <0x08ffc000 0x04000>, <0x08f00000 0x80000>; reg-names = "dbi", "config"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; bus-range = <0x00 0xff>; - ranges = <0x81000000 0 0 0x08f80000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */ + ranges = <0x81000000 0 0 0x08f80000 0 0x00010000>, /* downstream I/O */ + <0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */ num-lanes = <1>; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; diff --git a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi index 19a062635ff6..3cddc68917a0 100644 --- a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi @@ -68,8 +68,11 @@ }; &i2c1 { - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; clock-frequency = <100000>; status = "okay"; @@ -147,6 +150,13 @@ >; }; + pinctrl_i2c1_gpio: i2cgpiogrp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0 + MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi index 95e4080dd0a6..0d4ba9494cf2 100644 --- a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi +++ b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi @@ -191,6 +191,7 @@ no-1-8-v; keep-power-in-suspend; wakeup-source; + disable-wp; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dts new file mode 100644 index 000000000000..61b93cb040c7 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright 2021 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-emmc-nonwifi.dtsi" +#include "imx6ull-colibri-eval-v3.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Evaluation Board V3"; + compatible = "toradex,colibri-imx6ull-emmc-eval", + "toradex,colibri-imx6ull-emmc", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi new file mode 100644 index 000000000000..a099abfdfa27 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi @@ -0,0 +1,185 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright 2021 Toradex + */ + +#include "imx6ull-colibri.dtsi" + +/ { + aliases { + mmc0 = &usdhc2; /* eMMC */ + mmc1 = &usdhc1; /* MMC 4bit slot */ + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x10000000>; + }; +}; + +&gpio1 { + gpio-line-names = "SODIMM_8", + "SODIMM_6", + "SODIMM_129", + "SODIMM_89", + "SODIMM_19", + "SODIMM_21", + "UNUSABLE_SODIMM_180", + "UNUSABLE_SODIMM_184", + "SODIMM_4", + "SODIMM_2", + "SODIMM_106", + "SODIMM_71", + "SODIMM_23", + "SODIMM_31", + "SODIMM_99", + "SODIMM_102", + "SODIMM_33", + "SODIMM_35", + "SODIMM_25", + "SODIMM_27", + "SODIMM_36", + "SODIMM_38", + "SODIMM_32", + "SODIMM_34", + "SODIMM_135", + "SODIMM_77", + "SODIMM_100", + "SODIMM_186", + "SODIMM_196", + "SODIMM_194"; +}; + +&gpio2 { + gpio-line-names = "SODIMM_55", + "SODIMM_63", + "SODIMM_178", + "SODIMM_188", + "SODIMM_73", + "SODIMM_30", + "SODIMM_67", + "SODIMM_104", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_190", + "SODIMM_47", + "SODIMM_192", + "SODIMM_49", + "SODIMM_51", + "SODIMM_53"; +}; + +&gpio3 { + gpio-line-names = "SODIMM_56", + "SODIMM_44", + "SODIMM_68", + "SODIMM_82", + "", + "SODIMM_76", + "SODIMM_70", + "SODIMM_60", + "SODIMM_58", + "SODIMM_78", + "SODIMM_72", + "SODIMM_80", + "SODIMM_46", + "SODIMM_62", + "SODIMM_48", + "SODIMM_74", + "SODIMM_50", + "SODIMM_52", + "SODIMM_54", + "SODIMM_66", + "SODIMM_64", + "SODIMM_57", + "SODIMM_61", + "SODIMM_29", + "SODIMM_37", + "SODIMM_88", + "SODIMM_86", + "SODIMM_92", + "SODIMM_90"; +}; + +&gpio4 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_140", + "SODIMM_59", + "SODIMM_142", + "SODIMM_144", + "SODIMM_133", + "SODIMM_146", + "SODIMM_28", + "SODIMM_75", + "SODIMM_96", + "SODIMM_81", + "SODIMM_94", + "SODIMM_101", + "SODIMM_103", + "SODIMM_79", + "SODIMM_97", + "SODIMM_69", + "SODIMM_98", + "SODIMM_85", + "SODIMM_65"; +}; + +&gpio5 { + gpio-line-names = "SODIMM_43", + "SODIMM_45", + "SODIMM_137", + "SODIMM_95", + "SODIMM_107", + "SODIMM_131", + "SODIMM_93", + "", + "SODIMM_138", + "", + "SODIMM_105", + "SODIMM_127"; +}; + +&gpmi { + status = "disabled"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 + &pinctrl_gpio4 &pinctrl_gpio6 &pinctrl_gpio7 + &pinctrl_gpmi_gpio>; +}; + +&iomuxc_snvs { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio3>; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2emmc>; + assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>; + assigned-clock-rates = <0>, <198000000>; + bus-width = <8>; + keep-power-in-suspend; + no-1-8-v; + non-removable; + vmmc-supply = <®_module_3v3>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi index 0cdbf7b6e728..7f35a06dff95 100644 --- a/arch/arm/boot/dts/imx6ull-colibri.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2018 Toradex AG + * Copyright 2018-2021 Toradex */ #include "imx6ull.dtsi" @@ -345,6 +345,19 @@ >; }; + /* + * With an eMMC instead of a raw NAND device the following pins + * are available at SODIMM pins + */ + pinctrl_gpmi_gpio: gpmi-gpio-grp { + fsl,pins = < + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x10b0 /* SODIMM 140 */ + MX6UL_PAD_NAND_CE0_B__GPIO4_IO13 0x10b0 /* SODIMM 144 */ + MX6UL_PAD_NAND_CLE__GPIO4_IO15 0x10b0 /* SODIMM 146 */ + MX6UL_PAD_NAND_READY_B__GPIO4_IO12 0x10b0 /* SODIMM 142 */ + >; + }; + pinctrl_gpmi_nand: gpmi-nand-grp { fsl,pins = < MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x100a9 @@ -533,6 +546,21 @@ >; }; + pinctrl_usdhc2emmc: usdhc2emmcgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17059 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059 + >; + }; + pinctrl_wdog: wdog-grp { fsl,pins = < MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0 diff --git a/arch/arm/boot/dts/imx7-mba7.dtsi b/arch/arm/boot/dts/imx7-mba7.dtsi index 5e6bef230dc7..49086c6b6a0a 100644 --- a/arch/arm/boot/dts/imx7-mba7.dtsi +++ b/arch/arm/boot/dts/imx7-mba7.dtsi @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 OR X11 /* - * Device Tree Include file for TQ Systems MBa7 carrier board. + * Device Tree Include file for TQ-Systems MBa7 carrier board. * - * Copyright (C) 2016 TQ Systems GmbH + * Copyright (C) 2016 TQ-Systems GmbH * Author: Markus Niebel <Markus.Niebel@tq-group.com> * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com> * @@ -236,6 +236,44 @@ }; }; +&flash0 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uboot@0 { + label = "U-Boot"; + reg = <0x0 0xd0000>; + }; + + env1@d0000 { + label = "ENV1"; + reg = <0xd0000 0x10000>; + }; + + env2@e0000 { + label = "ENV2"; + reg = <0xe0000 0x10000>; + }; + + dtb@f0000 { + label = "DTB"; + reg = <0xf0000 0x10000>; + }; + + linux@100000 { + label = "Linux"; + reg = <0x100000 0x700000>; + }; + + rootfs@800000 { + label = "RootFS"; + reg = <0x800000 0x3800000>; + }; + }; +}; + &flexcan1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan1>; diff --git a/arch/arm/boot/dts/imx7-tqma7.dtsi b/arch/arm/boot/dts/imx7-tqma7.dtsi index 8773344b54aa..fe42b0a46831 100644 --- a/arch/arm/boot/dts/imx7-tqma7.dtsi +++ b/arch/arm/boot/dts/imx7-tqma7.dtsi @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 OR X11 /* - * Device Tree Include file for TQ Systems TQMa7x boards with full mounted PCB. + * Device Tree Include file for TQ-Systems TQMa7x boards with full mounted PCB. * - * Copyright (C) 2016 TQ Systems GmbH + * Copyright (C) 2016 TQ-Systems GmbH * Author: Markus Niebel <Markus.Niebel@tq-group.com> * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com> */ @@ -19,6 +19,16 @@ cpu-supply = <&sw1a_reg>; }; +&gpio2 { + /* Configured as pullup by QSPI pin group */ + qspi-reset-hog { + gpio-hog; + gpios = <4 GPIO_ACTIVE_LOW>; + input; + line-name = "qspi-reset"; + }; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; @@ -160,6 +170,25 @@ >; }; + pinctrl_qspi: qspigrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 0x5A + MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1 0x5A + MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2 0x5A + MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3 0x5A + MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK 0x11 + MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B 0x54 + MX7D_PAD_EPDC_DATA07__QSPI_A_SS1_B 0x54 + >; + }; + + pinctrl_qspi_reset: qspi_resetgrp { + fsl,pins = < + /* #QSPI_RESET */ + MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x52 + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX7D_PAD_SD3_CMD__SD3_CMD 0x59 @@ -217,6 +246,20 @@ }; }; +&qspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi &pinctrl_qspi_reset>; + status = "okay"; + + flash0: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <29000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + }; +}; + &sdma { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7d-mba7.dts b/arch/arm/boot/dts/imx7d-mba7.dts index 36ef6a3cdb0b..32bf9fa9d00e 100644 --- a/arch/arm/boot/dts/imx7d-mba7.dts +++ b/arch/arm/boot/dts/imx7d-mba7.dts @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 OR X11 /* - * Device Tree Source for TQ Systems TQMa7D board on MBa7 carrier board. + * Device Tree Source for TQ-Systems TQMa7D board on MBa7 carrier board. * - * Copyright (C) 2016 TQ Systems GmbH + * Copyright (C) 2016 TQ-Systems GmbH * Author: Markus Niebel <Markus.Niebel@tq-group.com> * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com> */ @@ -13,7 +13,7 @@ #include "imx7-mba7.dtsi" / { - model = "TQ Systems TQMa7D board on MBa7 carrier board"; + model = "TQ-Systems TQMa7D board on MBa7 carrier board"; compatible = "tq,imx7d-mba7", "tq,imx7d-tqma7", "fsl,imx7d"; }; diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 4a0d83784d7d..7813ef960f6e 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -45,7 +45,7 @@ pinctrl-0 = <&pinctrl_spi4>; gpio-sck = <&gpio1 13 GPIO_ACTIVE_HIGH>; gpio-mosi = <&gpio1 9 GPIO_ACTIVE_HIGH>; - cs-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; num-chipselects = <1>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx7d-tqma7.dtsi b/arch/arm/boot/dts/imx7d-tqma7.dtsi index 598aed1ffd99..3ee2017c1ab3 100644 --- a/arch/arm/boot/dts/imx7d-tqma7.dtsi +++ b/arch/arm/boot/dts/imx7d-tqma7.dtsi @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 OR X11 /* - * Device Tree Include file for TQ Systems TQMa7D board with NXP i.MX7Dual SoC. + * Device Tree Include file for TQ-Systems TQMa7D board with NXP i.MX7Dual SoC. * - * Copyright (C) 2016 TQ Systems GmbH + * Copyright (C) 2016 TQ-Systems GmbH * Author: Markus Niebel <Markus.Niebel@tq-group.com> * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com> */ diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index b0bcfa9094a3..b7735979b7e4 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -164,7 +164,7 @@ }; pcie: pcie@33800000 { - compatible = "fsl,imx7d-pcie", "snps,dw-pcie"; + compatible = "fsl,imx7d-pcie"; reg = <0x33800000 0x4000>, <0x4ff00000 0x80000>; reg-names = "dbi", "config"; @@ -172,10 +172,9 @@ #size-cells = <2>; device_type = "pci"; bus-range = <0x00 0xff>; - ranges = <0x81000000 0 0 0x4ff80000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */ + ranges = <0x81000000 0 0 0x4ff80000 0 0x00010000>, /* downstream I/O */ + <0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */ num-lanes = <1>; - num-viewport = <4>; interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/imx7s-mba7.dts b/arch/arm/boot/dts/imx7s-mba7.dts index d7d3f530f843..8e4cf589c92c 100644 --- a/arch/arm/boot/dts/imx7s-mba7.dts +++ b/arch/arm/boot/dts/imx7s-mba7.dts @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 OR X11 /* - * Device Tree Source for TQ Systems TQMa7S board on MBa7 carrier board. + * Device Tree Source for TQ-Systems TQMa7S board on MBa7 carrier board. * - * Copyright (C) 2016 TQ Systems GmbH + * Copyright (C) 2016 TQ-Systems GmbH * Author: Markus Niebel <Markus.Niebel@tq-group.com> * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com> */ @@ -13,6 +13,6 @@ #include "imx7-mba7.dtsi" / { - model = "TQ Systems TQMa7S board on MBa7 carrier board"; + model = "TQ-Systems TQMa7S board on MBa7 carrier board"; compatible = "tq,imx7s-mba7", "tq,imx7s-tqma7", "fsl,imx7s"; }; diff --git a/arch/arm/boot/dts/imx7s-tqma7.dtsi b/arch/arm/boot/dts/imx7s-tqma7.dtsi index 5f5433eb7dd7..7a190fdb2d30 100644 --- a/arch/arm/boot/dts/imx7s-tqma7.dtsi +++ b/arch/arm/boot/dts/imx7s-tqma7.dtsi @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 OR X11 /* - * Device Tree Include file for TQ Systems TQMa7S board with NXP i.MX7Solo SoC. + * Device Tree Include file for TQ-Systems TQMa7S board with NXP i.MX7Solo SoC. * - * Copyright (C) 2016 TQ Systems GmbH + * Copyright (C) 2016 TQ-Systems GmbH * Author: Markus Niebel <Markus.Niebel@tq-group.com> * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com> */ diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi index 602f74d2c758..ad868cfebc94 100644 --- a/arch/arm/boot/dts/integrator.dtsi +++ b/arch/arm/boot/dts/integrator.dtsi @@ -15,10 +15,14 @@ core-module@10000000 { compatible = "arm,core-module-integrator", "syscon", "simple-mfd"; reg = <0x10000000 0x200>; + ranges = <0x0 0x10000000 0x200>; + #address-cells = <1>; + #size-cells = <1>; /* Use core module LED to indicate CPU load */ - led@c.0 { + led@c,0 { compatible = "register-bit-led"; + reg = <0x0c 0x04>; offset = <0x0c>; mask = <0x01>; label = "integrator:core_module"; @@ -104,35 +108,42 @@ interrupts = <4>; }; - syscon { + syscon@1a000000 { /* Debug registers mapped as syscon */ compatible = "syscon", "simple-mfd"; reg = <0x1a000000 0x10>; + ranges = <0x0 0x1a000000 0x10>; + #address-cells = <1>; + #size-cells = <1>; - led@4.0 { + led@4,0 { compatible = "register-bit-led"; + reg = <0x04 0x04>; offset = <0x04>; mask = <0x01>; label = "integrator:green0"; linux,default-trigger = "heartbeat"; default-state = "on"; }; - led@4.1 { + led@4,1 { compatible = "register-bit-led"; + reg = <0x04 0x04>; offset = <0x04>; mask = <0x02>; label = "integrator:yellow"; default-state = "off"; }; - led@4.2 { + led@4,2 { compatible = "register-bit-led"; + reg = <0x04 0x04>; offset = <0x04>; mask = <0x04>; label = "integrator:red"; default-state = "off"; }; - led@4.3 { + led@4,3 { compatible = "register-bit-led"; + reg = <0x04 0x04>; offset = <0x04>; mask = <0x08>; label = "integrator:green1"; diff --git a/arch/arm/boot/dts/integratorap-im-pd1.dts b/arch/arm/boot/dts/integratorap-im-pd1.dts index 0614f82b808e..d47bfb66d069 100644 --- a/arch/arm/boot/dts/integratorap-im-pd1.dts +++ b/arch/arm/boot/dts/integratorap-im-pd1.dts @@ -28,9 +28,13 @@ syscon@0 { compatible = "arm,im-pd1-syscon", "syscon"; reg = <0x00000000 0x1000>; + ranges; + #address-cells = <1>; + #size-cells = <1>; - vco1: vco1-clock { + vco1: clock-controller@0 { compatible = "arm,impd1-vco1"; + reg = <0x00 0x04>; #clock-cells = <0>; lock-offset = <0x08>; vco-offset = <0x00>; @@ -38,8 +42,9 @@ clock-output-names = "IM-PD1-VCO1"; }; - vco2: vco2-clock { + vco2: clock-controller@4 { compatible = "arm,impd1-vco2"; + reg = <0x04 0x04>; #clock-cells = <0>; lock-offset = <0x08>; vco-offset = <0x04>; diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts index 67d1f9b24a52..9b652cc27b14 100644 --- a/arch/arm/boot/dts/integratorap.dts +++ b/arch/arm/boot/dts/integratorap.dts @@ -88,8 +88,9 @@ }; /* Oscillator on the core module, clocks the CPU core */ - cmosc: cmosc@24M { + cmosc: clock-controller@8 { compatible = "arm,syscon-icst525-integratorap-cm"; + reg = <0x08 0x04>; #clock-cells = <0>; lock-offset = <0x14>; vco-offset = <0x08>; @@ -97,8 +98,9 @@ }; /* Auxilary oscillator on the core module, 32.369MHz at boot */ - auxosc: auxosc@24M { + auxosc: clock-controller@1c { compatible = "arm,syscon-icst525"; + reg = <0x1c 0x04>; #clock-cells = <0>; lock-offset = <0x14>; vco-offset = <0x1c>; @@ -109,13 +111,17 @@ syscon { compatible = "arm,integrator-ap-syscon", "syscon"; reg = <0x11000000 0x100>; + ranges = <0x0 0x11000000 0x100>; + #size-cells = <1>; + #address-cells = <1>; /* * SYSCLK clocks PCIv3 bridge, system controller and the * logic modules. */ - sysclk: apsys@24M { + sysclk: clock-controller@4 { compatible = "arm,syscon-icst525-integratorap-sys"; + reg = <0x04 0x04>; #clock-cells = <0>; lock-offset = <0x1c>; vco-offset = <0x04>; @@ -123,8 +129,9 @@ }; /* One-bit control for the PCI bus clock (33 or 25 MHz) */ - pciclk: pciclk@24M { + pciclk: clock-controller@4,8 { compatible = "arm,syscon-icst525-integratorap-pci"; + reg = <0x04 0x04>; #clock-cells = <0>; lock-offset = <0x1c>; vco-offset = <0x04>; diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts index 01fa229e1bd0..38fc7e81bdb6 100644 --- a/arch/arm/boot/dts/integratorcp.dts +++ b/arch/arm/boot/dts/integratorcp.dts @@ -92,8 +92,9 @@ }; /* Oscillator on the core module, clocks the CPU core */ - cmcore: cmosc@24M { + cmcore: clock-controller@8 { compatible = "arm,syscon-icst525-integratorcp-cm-core"; + reg = <0x08 0x04>; #clock-cells = <0>; lock-offset = <0x14>; vco-offset = <0x08>; @@ -101,8 +102,9 @@ }; /* Oscillator on the core module, clocks the memory bus */ - cmmem: cmosc@24M { + cmmem: clock-controller@8,12 { compatible = "arm,syscon-icst525-integratorcp-cm-mem"; + reg = <0x08 0x04>; #clock-cells = <0>; lock-offset = <0x14>; vco-offset = <0x08>; @@ -110,8 +112,9 @@ }; /* Auxilary oscillator on the core module, clocks the CLCD */ - auxosc: auxosc@24M { + auxosc: clock-controller@1c { compatible = "arm,syscon-icst525"; + reg = <0x1c 0x04>; #clock-cells = <0>; lock-offset = <0x14>; vco-offset = <0x1c>; diff --git a/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts b/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts index 44c017b78008..bd4230d7dac9 100644 --- a/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts +++ b/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts @@ -63,6 +63,8 @@ * We have slots (IDSEL) 1 and 2 with one assigned IRQ * each handling all IRQs. */ + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = /* IDSEL 1 */ <0x0800 0 0 1 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 6 */ diff --git a/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts b/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts index 7200126cb3b5..92b987bc3f99 100644 --- a/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts +++ b/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts @@ -120,6 +120,8 @@ * We have 2 slots (IDSEL) 1 and 2 with one dedicated interrupt * per slot. This interrupt is shared (OR:ed) by all four pins. */ + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = /* IDSEL 1 */ <0x0800 0 0 1 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 2 */ diff --git a/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts b/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts index 8b32e9f22d81..5ab09fb10dae 100644 --- a/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts +++ b/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts @@ -129,6 +129,8 @@ * We have slots (IDSEL) 1, 2, 3, 4 and pins 1, 2 and 3. * Only slot 3 have three IRQs. */ + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = /* IDSEL 1 */ <0x0800 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT E on slot 1 is irq 7 */ diff --git a/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts b/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts index 77e78c6dc2cd..598586fc0862 100644 --- a/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts +++ b/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts @@ -106,6 +106,8 @@ * Written based on the FSG-3 PCI boardfile. * We have slots 12, 13 & 14 (IDSEL) with one IRQ each. */ + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = /* IDSEL 12 */ <0x6000 0 0 1 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 5 */ diff --git a/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts b/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts index a20277ff0420..a5943f51e8c2 100644 --- a/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts +++ b/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts @@ -115,6 +115,8 @@ * * We have up to 4 slots (IDSEL) with 4 swizzled IRQs. */ + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = /* IDSEL 1 */ <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */ diff --git a/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts b/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts index 8c18d802c849..cbc87b344f6a 100644 --- a/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts +++ b/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts @@ -115,6 +115,8 @@ * Taken from NAS 100D PCI boardfile (nas100d-pci.c) * We have slots (IDSEL) 1, 2 and 3 and pins 1, 2 and 3. */ + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = /* IDSEL 1 */ <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */ diff --git a/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts b/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts index 002a8705abc9..f17cab12a64b 100644 --- a/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts +++ b/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts @@ -68,6 +68,8 @@ * We have slots (IDSEL) 12, 13 and 14 with one assigned IRQ * for 12 & 13 and one for 14. */ + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = /* IDSEL 12 */ <0x6000 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 7 */ diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts index e3a32b08d167..0edc5928e00b 100644 --- a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts +++ b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts @@ -122,6 +122,8 @@ * Taken from NSLU2 PCI boardfile, INT A, B, C swizzled D constant * We have slots (IDSEL) 1, 2 and 3. */ + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = /* IDSEL 1 */ <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */ diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts index 6b28dda747fd..5e7e31b74b04 100644 --- a/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts +++ b/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts @@ -123,6 +123,8 @@ * We have up to 2 slots (IDSEL) with 2 swizzled IRQs. * Derived from the GTWX5715 PCI boardfile. */ + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = /* IDSEL 0 */ <0x0000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 0 is irq 10 */ diff --git a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v2.dts b/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v2.dts index 04a0f7138967..a57009436ed8 100644 --- a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v2.dts +++ b/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v2.dts @@ -62,6 +62,8 @@ * We have slots (IDSEL) 1 and 2 with one assigned IRQ * each handling all IRQs. */ + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = /* IDSEL 1 */ <0x0800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 8 */ diff --git a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts index 84e6aec8e665..cf4010d60187 100644 --- a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts +++ b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts @@ -131,6 +131,8 @@ * have instead assumed that they are rotated (swizzled) like * this with 11, 10, 9, 8 for the 4 pins on IDSEL 1 etc. */ + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = /* IDSEL 1 */ <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */ diff --git a/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi b/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi index b6ff614dadc6..1dd4a65cb7a6 100644 --- a/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi +++ b/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi @@ -74,5 +74,13 @@ queue-rx = <&qmgr 0>; queue-txready = <&qmgr 0>; }; + + ptp-timer@c8010000 { + compatible = "intel,ixp46x-ptp-timer"; + reg = <0xc8010000 0x1000>; + interrupt-parent = <&gpio0>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>, <7 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "master", "slave"; + }; }; }; diff --git a/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi b/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi index c1d9c49982b3..146352ba848b 100644 --- a/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi +++ b/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi @@ -106,6 +106,8 @@ * PCI slots on the BIXMB425BD base card. * We have up to 4 slots (IDSEL) with 4 swizzled IRQs. */ + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = /* IDSEL 1 */ <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */ diff --git a/arch/arm/boot/dts/intel-ixp4xx.dtsi b/arch/arm/boot/dts/intel-ixp4xx.dtsi index e5af2d463074..46fede021476 100644 --- a/arch/arm/boot/dts/intel-ixp4xx.dtsi +++ b/arch/arm/boot/dts/intel-ixp4xx.dtsi @@ -78,8 +78,6 @@ dma-ranges = <0x02000000 0 0x00000000 0x00000000 0 0x04000000>; - #interrupt-cells = <1>; - interrupt-map-mask = <0xf800 0 0 7>; /* Each unique DTS using PCI must specify the swizzling */ }; diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi index bc857676d191..849034a49a3f 100644 --- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi +++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi @@ -158,6 +158,8 @@ status = "okay"; phy3: ethernet-phy@3 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; reg = <3>; micrel,led-mode = <1>; }; diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts index 74a67604876c..f1acb97aee69 100644 --- a/arch/arm/boot/dts/ls1021a-qds.dts +++ b/arch/arm/boot/dts/ls1021a-qds.dts @@ -1,49 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright 2013-2014 Freescale Semiconductor, Inc. * Copyright 2018 NXP - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -67,19 +25,12 @@ clock-frequency = <24576000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_3p3v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + reg_3p3v: regulator { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; }; sound { @@ -231,9 +182,9 @@ #address-cells = <2>; #size-cells = <1>; /* NOR, NAND Flashes and FPGA on board */ - ranges = <0x0 0x0 0x0 0x60000000 0x08000000 - 0x2 0x0 0x0 0x7e800000 0x00010000 - 0x3 0x0 0x0 0x7fb00000 0x00000100>; + ranges = <0x0 0x0 0x0 0x60000000 0x08000000>, + <0x2 0x0 0x0 0x7e800000 0x00010000>, + <0x3 0x0 0x0 0x7fb00000 0x00000100>; status = "okay"; nor@0,0 { @@ -254,7 +205,7 @@ fpga: board-control@3,0 { #address-cells = <1>; #size-cells = <1>; - compatible = "simple-bus"; + compatible = "simple-mfd"; reg = <0x3 0x0 0x0000100>; bank-width = <1>; device-width = <1>; @@ -328,6 +279,20 @@ }; }; +&qspi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + reg = <0>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + }; +}; + &sai2 { status = "okay"; }; diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts index 9d8f0c2a8aba..ff0ffb22768b 100644 --- a/arch/arm/boot/dts/ls1021a-tsn.dts +++ b/arch/arm/boot/dts/ls1021a-tsn.dts @@ -8,6 +8,7 @@ / { model = "NXP LS1021A-TSN Board"; + compatible = "fsl,ls1021a-tsn", "fsl,ls1021a"; sys_mclk: clock-mclk { compatible = "fixed-clock"; @@ -136,7 +137,6 @@ /* 3 axis accelerometer */ accelerometer@1e { compatible = "fsl,fxls8471"; - position = <0>; reg = <0x1e>; }; @@ -251,7 +251,7 @@ flash@0 { /* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */ - compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s"; + compatible = "jedec,spi-nor"; spi-max-frequency = <20000000>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts index 5edf001f6138..f5c03871b205 100644 --- a/arch/arm/boot/dts/ls1021a-twr.dts +++ b/arch/arm/boot/dts/ls1021a-twr.dts @@ -1,49 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright 2013-2014 Freescale Semiconductor, Inc. * Copyright 2018 NXP - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -65,19 +23,12 @@ clock-frequency = <24576000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_3p3v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + reg_3p3v: regulator { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; }; sound { diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 4fce81422943..2e69d6eab4d1 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright 2013-2014 Freescale Semiconductor, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -51,7 +9,6 @@ / { #address-cells = <2>; #size-cells = <2>; - compatible = "fsl,ls1021a"; interrupt-parent = <&gic>; aliases { @@ -90,7 +47,7 @@ }; }; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x0>; }; @@ -169,6 +126,7 @@ compatible = "fsl,ifc", "simple-bus"; reg = <0x0 0x1530000 0x0 0x10000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; }; dcfg: dcfg@1ee0000 { @@ -290,78 +248,45 @@ reg = <0x0 0x1f00000 0x0 0x10000>; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; fsl,tmu-range = <0xb0000 0x9002c 0x6004e 0x30066>; - fsl,tmu-calibration = <0x00000000 0x00000020 - 0x00000001 0x00000024 - 0x00000002 0x0000002a - 0x00000003 0x00000032 - 0x00000004 0x00000038 - 0x00000005 0x0000003e - 0x00000006 0x00000043 - 0x00000007 0x0000004a - 0x00000008 0x00000050 - 0x00000009 0x00000059 - 0x0000000a 0x0000005f - 0x0000000b 0x00000066 - - 0x00010000 0x00000023 - 0x00010001 0x0000002b - 0x00010002 0x00000033 - 0x00010003 0x0000003a - 0x00010004 0x00000042 - 0x00010005 0x0000004a - 0x00010006 0x00000054 - 0x00010007 0x0000005c - 0x00010008 0x00000065 - 0x00010009 0x0000006f - - 0x00020000 0x00000029 - 0x00020001 0x00000033 - 0x00020002 0x0000003d - 0x00020003 0x00000048 - 0x00020004 0x00000054 - 0x00020005 0x00000060 - 0x00020006 0x0000006c - - 0x00030000 0x00000025 - 0x00030001 0x00000033 - 0x00030002 0x00000043 - 0x00030003 0x00000055>; + fsl,tmu-calibration = <0x00000000 0x00000020>, + <0x00000001 0x00000024>, + <0x00000002 0x0000002a>, + <0x00000003 0x00000032>, + <0x00000004 0x00000038>, + <0x00000005 0x0000003e>, + <0x00000006 0x00000043>, + <0x00000007 0x0000004a>, + <0x00000008 0x00000050>, + <0x00000009 0x00000059>, + <0x0000000a 0x0000005f>, + <0x0000000b 0x00000066>, + + <0x00010000 0x00000023>, + <0x00010001 0x0000002b>, + <0x00010002 0x00000033>, + <0x00010003 0x0000003a>, + <0x00010004 0x00000042>, + <0x00010005 0x0000004a>, + <0x00010006 0x00000054>, + <0x00010007 0x0000005c>, + <0x00010008 0x00000065>, + <0x00010009 0x0000006f>, + + <0x00020000 0x00000029>, + <0x00020001 0x00000033>, + <0x00020002 0x0000003d>, + <0x00020003 0x00000048>, + <0x00020004 0x00000054>, + <0x00020005 0x00000060>, + <0x00020006 0x0000006c>, + + <0x00030000 0x00000025>, + <0x00030001 0x00000033>, + <0x00030002 0x00000043>, + <0x00030003 0x00000055>; #thermal-sensor-cells = <1>; }; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <5000>; - - thermal-sensors = <&tmu 0>; - - trips { - cpu_alert: cpu-alert { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit: cpu-crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - }; - }; - }; - dspi0: spi@2100000 { compatible = "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; @@ -394,10 +319,9 @@ #size-cells = <0>; reg = <0x0 0x2180000 0x0 0x10000>; interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "i2c"; clocks = <&clockgen 4 1>; - dma-names = "tx", "rx"; - dmas = <&edma0 1 39>, <&edma0 1 38>; + dma-names = "rx", "tx"; + dmas = <&edma0 1 38>, <&edma0 1 39>; status = "disabled"; }; @@ -407,10 +331,9 @@ #size-cells = <0>; reg = <0x0 0x2190000 0x0 0x10000>; interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "i2c"; clocks = <&clockgen 4 1>; - dma-names = "tx", "rx"; - dmas = <&edma0 1 37>, <&edma0 1 36>; + dma-names = "rx", "tx"; + dmas = <&edma0 1 36>, <&edma0 1 37>; status = "disabled"; }; @@ -420,10 +343,9 @@ #size-cells = <0>; reg = <0x0 0x21a0000 0x0 0x10000>; interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "i2c"; clocks = <&clockgen 4 1>; - dma-names = "tx", "rx"; - dmas = <&edma0 1 35>, <&edma0 1 34>; + dma-names = "rx", "tx"; + dmas = <&edma0 1 34>, <&edma0 1 35>; status = "disabled"; }; @@ -884,8 +806,8 @@ pcie@3400000 { compatible = "fsl,ls1021a-pcie"; - reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */ - 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03400000 0x0 0x00010000>, /* controller registers */ + <0x40 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ fsl,pcie-scfg = <&scfg 0>; @@ -894,8 +816,8 @@ device_type = "pci"; num-viewport = <6>; bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ - 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000>, /* downstream I/O */ + <0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ msi-parent = <&msi1>, <&msi2>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; @@ -908,8 +830,8 @@ pcie@3500000 { compatible = "fsl,ls1021a-pcie"; - reg = <0x00 0x03500000 0x0 0x00010000 /* controller registers */ - 0x48 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03500000 0x0 0x00010000>, /* controller registers */ + <0x48 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; fsl,pcie-scfg = <&scfg 1>; @@ -918,8 +840,8 @@ device_type = "pci"; num-viewport = <6>; bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ - 0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000>, /* downstream I/O */ + <0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ msi-parent = <&msi1>, <&msi2>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; @@ -992,6 +914,7 @@ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "qdma-error", "qdma-queue0", "qdma-queue1"; + #dma-cells = <2>; dma-channels = <8>; block-number = <1>; block-offset = <0x1000>; @@ -1005,6 +928,7 @@ compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+"; reg = <0x0 0x1ee2140 0x0 0x8>; #fsl,rcpm-wakeup-cells = <2>; + #power-domain-cells = <0>; }; ftm_alarm0: timer0@29d0000 { @@ -1016,4 +940,37 @@ big-endian; }; }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + + thermal-sensors = <&tmu 0>; + + trips { + cpu_alert: cpu-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit: cpu-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/mps2.dtsi b/arch/arm/boot/dts/mps2.dtsi index 37f5023f529c..b99577d411b1 100644 --- a/arch/arm/boot/dts/mps2.dtsi +++ b/arch/arm/boot/dts/mps2.dtsi @@ -216,8 +216,13 @@ compatible = "syscon", "simple-mfd"; reg = <0x8000 0x10>; - led0 { + ranges = <0x0 0x8000 0x10>; + #address-cells = <1>; + #size-cells = <1>; + + led@0,0 { compatible = "register-bit-led"; + reg = <0x00 0x04>; offset = <0x0>; mask = <0x01>; label = "userled:0"; @@ -225,8 +230,9 @@ default-state = "on"; }; - led1 { + led@0,1 { compatible = "register-bit-led"; + reg = <0x00 0x04>; offset = <0x0>; mask = <0x02>; label = "userled:1"; diff --git a/arch/arm/boot/dts/mstar-v7.dtsi b/arch/arm/boot/dts/mstar-v7.dtsi index 2273295e140f..89ebfe4f29da 100644 --- a/arch/arm/boot/dts/mstar-v7.dtsi +++ b/arch/arm/boot/dts/mstar-v7.dtsi @@ -39,6 +39,7 @@ * u-boot is broken */ clock-frequency = <6000000>; + arm,cpu-registers-not-fw-configured; }; pmu: pmu { @@ -109,12 +110,20 @@ mask = <0x79>; }; + rtc@2400 { + compatible = "mstar,msc313-rtc"; + reg = <0x2400 0x40>; + clocks = <&xtal_div2>; + interrupts-extended = <&intc_irq GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + }; + watchdog@6000 { compatible = "mstar,msc313e-wdt"; reg = <0x6000 0x1f>; clocks = <&xtal_div2>; }; + intc_fiq: interrupt-controller@201310 { compatible = "mstar,mst-intc"; reg = <0x201310 0x40>; diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index a7d62dbad602..f4848362b3be 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -585,6 +585,39 @@ status = "disabled"; }; + usb0: usb@11200000 { + compatible = "mediatek,mt7623-musb", + "mediatek,mtk-musb"; + reg = <0 0x11200000 0 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "mc"; + phys = <&u2port2 PHY_TYPE_USB2>; + dr_mode = "otg"; + clocks = <&pericfg CLK_PERI_USB0>, + <&pericfg CLK_PERI_USB0_MCU>, + <&pericfg CLK_PERI_USB_SLV>; + clock-names = "main","mcu","univpll"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; + status = "disabled"; + }; + + u2phy1: t-phy@11210000 { + compatible = "mediatek,mt7623-tphy", + "mediatek,generic-tphy-v1"; + reg = <0 0x11210000 0 0x0800>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + u2port2: usb-phy@11210800 { + reg = <0 0x11210800 0 0x0100>; + clocks = <&topckgen CLK_TOP_USB_PHY48M>; + clock-names = "ref"; + #phy-cells = <1>; + }; + }; + audsys: clock-controller@11220000 { compatible = "mediatek,mt7623-audsys", "mediatek,mt2701-audsys", diff --git a/arch/arm/boot/dts/mt7623a.dtsi b/arch/arm/boot/dts/mt7623a.dtsi index 0735a1fb8ad9..d304b62d24b5 100644 --- a/arch/arm/boot/dts/mt7623a.dtsi +++ b/arch/arm/boot/dts/mt7623a.dtsi @@ -35,6 +35,10 @@ clock-names = "ethif"; }; +&usb0 { + power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>; +}; + &usb1 { power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>; }; diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts index e96aa0ed1ebd..027c1b0c6a98 100644 --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts @@ -366,6 +366,14 @@ status = "okay"; }; +&pio { + musb_pins: musb { + pins-musb { + pinmux = <MT7623_PIN_237_EXT_SDIO2_FUNC_DRV_VBUS>; + }; + }; +}; + &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm_pins_a>; @@ -396,6 +404,19 @@ status = "okay"; }; +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&musb_pins>; + status = "okay"; + usb-role-switch; + + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + type = "micro"; + id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>; + }; +}; + &usb1 { vusb33-supply = <®_3p3v>; vbus-supply = <®_5v>; @@ -408,6 +429,10 @@ status = "okay"; }; +&u2phy1 { + status = "okay"; +}; + &u3phy1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/mt7629-rfb.dts b/arch/arm/boot/dts/mt7629-rfb.dts index 9980c10c6e29..eb536cbebd9b 100644 --- a/arch/arm/boot/dts/mt7629-rfb.dts +++ b/arch/arm/boot/dts/mt7629-rfb.dts @@ -140,9 +140,10 @@ }; }; -&pcie { +&pcie1 { pinctrl-names = "default"; pinctrl-0 = <&pcie_pins>; + status = "okay"; }; &pciephy1 { diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi index 874043f0490d..46fc236e1b89 100644 --- a/arch/arm/boot/dts/mt7629.dtsi +++ b/arch/arm/boot/dts/mt7629.dtsi @@ -361,16 +361,21 @@ #reset-cells = <1>; }; - pcie: pcie@1a140000 { + pciecfg: pciecfg@1a140000 { + compatible = "mediatek,generic-pciecfg", "syscon"; + reg = <0x1a140000 0x1000>; + }; + + pcie1: pcie@1a145000 { compatible = "mediatek,mt7629-pcie"; device_type = "pci"; - reg = <0x1a140000 0x1000>, - <0x1a145000 0x1000>; - reg-names = "subsys","port1"; + reg = <0x1a145000 0x1000>; + reg-names = "port1"; + linux,pci-domain = <1>; #address-cells = <3>; #size-cells = <2>; - interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "pcie_irq"; clocks = <&pciesys CLK_PCIE_P1_MAC_EN>, <&pciesys CLK_PCIE_P0_AHB_EN>, <&pciesys CLK_PCIE_P1_AUX_EN>, @@ -391,26 +396,18 @@ power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; bus-range = <0x00 0xff>; ranges = <0x82000000 0 0x20000000 0x20000000 0 0x10000000>; + status = "disabled"; - pcie1: pcie@1,0 { - device_type = "pci"; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; #interrupt-cells = <1>; - ranges; - num-lanes = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc1 0>, - <0 0 0 2 &pcie_intc1 1>, - <0 0 0 3 &pcie_intc1 2>, - <0 0 0 4 &pcie_intc1 3>; - - pcie_intc1: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; }; }; diff --git a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi index ded7e8fec9eb..ce6c235f68ec 100644 --- a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi +++ b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi @@ -25,8 +25,8 @@ compatible = "smsc,lan9221", "smsc,lan9115"; bank-width = <2>; gpmc,device-width = <1>; - gpmc,cycle2cycle-samecsen = <1>; - gpmc,cycle2cycle-diffcsen = <1>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; gpmc,cs-on-ns = <5>; gpmc,cs-rd-off-ns = <150>; gpmc,cs-wr-off-ns = <150>; diff --git a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi index 7f6aefd13451..e7534fe9c53c 100644 --- a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi +++ b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi @@ -29,7 +29,7 @@ compatible = "smsc,lan9221","smsc,lan9115"; bank-width = <2>; - gpmc,mux-add-data; + gpmc,mux-add-data = <0>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <42>; gpmc,cs-wr-off-ns = <36>; diff --git a/arch/arm/boot/dts/omap-zoom-common.dtsi b/arch/arm/boot/dts/omap-zoom-common.dtsi index d4ad9e58b199..1e96c865d41d 100644 --- a/arch/arm/boot/dts/omap-zoom-common.dtsi +++ b/arch/arm/boot/dts/omap-zoom-common.dtsi @@ -27,8 +27,8 @@ gpmc,mux-add-data = <0>; gpmc,device-width = <1>; gpmc,wait-pin = <1>; - gpmc,cycle2cycle-samecsen = <1>; - gpmc,cycle2cycle-diffcsen = <1>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; gpmc,cs-on-ns = <5>; gpmc,cs-rd-off-ns = <155>; gpmc,cs-wr-off-ns = <155>; diff --git a/arch/arm/boot/dts/omap2430-sdp.dts b/arch/arm/boot/dts/omap2430-sdp.dts index 7d27e907533f..207070677e3a 100644 --- a/arch/arm/boot/dts/omap2430-sdp.dts +++ b/arch/arm/boot/dts/omap2430-sdp.dts @@ -43,8 +43,8 @@ gpmc,sync-clk-ps = <0>; gpmc,mux-add-data = <2>; gpmc,device-width = <1>; - gpmc,cycle2cycle-samecsen = <1>; - gpmc,cycle2cycle-diffcsen = <1>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; gpmc,cs-on-ns = <6>; gpmc,cs-rd-off-ns = <187>; gpmc,cs-wr-off-ns = <187>; diff --git a/arch/arm/boot/dts/omap3-cpu-thermal.dtsi b/arch/arm/boot/dts/omap3-cpu-thermal.dtsi index 1ed837859374..a9069cca5888 100644 --- a/arch/arm/boot/dts/omap3-cpu-thermal.dtsi +++ b/arch/arm/boot/dts/omap3-cpu-thermal.dtsi @@ -10,7 +10,7 @@ #include <dt-bindings/thermal/thermal.h> -cpu_thermal: cpu_thermal { +cpu_thermal: cpu-thermal { polling-delay-passive = <250>; /* milliseconds */ polling-delay = <1000>; /* milliseconds */ coefficients = <0 20000>; diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi index 2c19d6e255bd..5e55198e4576 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi @@ -267,8 +267,8 @@ gpmc,mux-add-data = <0>; gpmc,device-width = <1>; gpmc,wait-pin = <0>; - gpmc,cycle2cycle-samecsen = <1>; - gpmc,cycle2cycle-diffcsen = <1>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; gpmc,cs-on-ns = <6>; gpmc,cs-rd-off-ns = <180>; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 938cc691bb2f..7e3d8147e2c1 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -104,16 +104,16 @@ #sound-dai-cells = <0>; }; - spi_lcd: spi_lcd { + spi_lcd: spi { compatible = "spi-gpio"; #address-cells = <0x1>; #size-cells = <0x0>; pinctrl-names = "default"; pinctrl-0 = <&spi_gpio_pins>; - gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>; - gpio-miso = <&gpio1 18 GPIO_ACTIVE_HIGH>; - gpio-mosi = <&gpio1 20 GPIO_ACTIVE_HIGH>; + sck-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; cs-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; num-chipselects = <1>; @@ -508,6 +508,8 @@ pinctrl-0 = <&bmp085_pins>; interrupt-parent = <&gpio4>; interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */ + vdda-supply = <&vio>; + vddd-supply = <&vio>; }; /* accelerometer */ @@ -515,7 +517,7 @@ compatible = "bosch,bma180"; reg = <0x41>; pinctrl-names = "default"; - pintcrl-0 = <&bma180_pins>; + pinctrl-0 = <&bma180_pins>; interrupt-parent = <&gpio4>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */ }; @@ -540,28 +542,29 @@ gpio-controller; #gpio-cells = <2>; - gta04_led0: red_aux@0 { + gta04_led0: led@0 { label = "gta04:red:aux"; reg = <0x0>; }; - gta04_led1: green_aux@1 { + gta04_led1: led@1 { label = "gta04:green:aux"; reg = <0x1>; }; - gta04_led3: red_power@3 { + gta04_led3: led@3 { label = "gta04:red:power"; reg = <0x3>; linux,default-trigger = "default-on"; }; - gta04_led4: green_power@4 { + gta04_led4: led@4 { label = "gta04:green:power"; reg = <0x4>; }; - wifi_reset: wifi_reset@6 { /* reference as <&tca_gpios 0 0> since it is currently the only GPIO */ + wifi_reset: led@6 { + /* reference as <&tca_gpios 0 0> since it is currently the only GPIO */ reg = <0x6>; compatible = "gpio"; }; diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts index b4c4ca7e1842..0b5bd7388877 100644 --- a/arch/arm/boot/dts/omap3-gta04a5.dts +++ b/arch/arm/boot/dts/omap3-gta04a5.dts @@ -133,5 +133,7 @@ bme280@76 { compatible = "bosch,bme280"; reg = <0x76>; + vdda-supply = <&vio>; + vddd-supply = <&vio>; }; }; diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi index e5da3bc6f105..218a10c0d815 100644 --- a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi @@ -22,7 +22,7 @@ compatible = "smsc,lan9221","smsc,lan9115"; bank-width = <2>; - gpmc,mux-add-data; + gpmc,mux-add-data = <0>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <42>; gpmc,cs-wr-off-ns = <36>; diff --git a/arch/arm/boot/dts/omap3-sb-t35.dtsi b/arch/arm/boot/dts/omap3-sb-t35.dtsi index fb9842fa922c..5ec0893415e0 100644 --- a/arch/arm/boot/dts/omap3-sb-t35.dtsi +++ b/arch/arm/boot/dts/omap3-sb-t35.dtsi @@ -108,8 +108,8 @@ reg = <4 0 0xff>; bank-width = <2>; gpmc,device-width = <1>; - gpmc,cycle2cycle-samecsen = <1>; - gpmc,cycle2cycle-diffcsen = <1>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; gpmc,cs-on-ns = <5>; gpmc,cs-rd-off-ns = <150>; gpmc,cs-wr-off-ns = <150>; diff --git a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts new file mode 100644 index 000000000000..f350c4e8c194 --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts @@ -0,0 +1,237 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz> + */ + +/dts-v1/; + +#include "qcom-msm8226.dtsi" +#include "qcom-pm8226.dtsi" + +/ { + model = "LG G Watch R"; + compatible = "lg,lenok", "qcom,apq8026"; + qcom,board-id = <132 0x0a>; + qcom,msm-id = <199 0x20000>; + + aliases { + serial0 = &blsp1_uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_i2c5 { + status = "okay"; + clock-frequency = <384000>; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + + interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8226_l15>; + vio-supply = <&pm8226_l22>; + + pinctrl-names = "default"; + pinctrl-0 = <&touch_pins>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_uart3 { + status = "okay"; +}; + +&rpm_requests { + pm8226-regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s1: s1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1275000>; + }; + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + }; + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + }; + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + pm8226_l15: l15 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3350000>; + }; + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l18: l18 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + pm8226_l19: l19 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + pm8226_l27: l27 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + pm8226_l28: l28 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3000000>; + }; + + pm8226_lvs1: lvs1 {}; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + bus-width = <8>; + non-removable; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc1_pin_a>; +}; + +&tlmm { + sdhc1_pin_a: sdhc1-pin-active { + clk { + pins = "sdc1_clk"; + drive-strength = <10>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + touch_pins: touch { + irq { + pins = "gpio17"; + function = "gpio"; + + drive-strength = <8>; + bias-pull-down; + input-enable; + }; + + reset { + pins = "gpio16"; + function = "gpio"; + + drive-strength = <8>; + bias-disable; + output-high; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts index e1189e929ee6..d664ccd454c5 100644 --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts @@ -357,8 +357,8 @@ }; mpps@50 { - dragon_cm3605_mpps: cm3605-mpps { - pinconf { + dragon_cm3605_mpps: cm3605-mpps-state { + mpp5 { pins = "mpp5"; function = "analog"; input-enable; @@ -899,7 +899,7 @@ }; amba { /* Internal 3.69 GiB eMMC */ - sdcc@12400000 { + mmc@12400000 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dragon_sdcc1_pins>; @@ -908,7 +908,7 @@ }; /* External micro SD card, directly connected, pulled up to 2.85 V */ - sdcc@12180000 { + mmc@12180000 { status = "okay"; /* Enable SSBI GPIO 22 as input, use for card detect */ pinctrl-names = "default"; @@ -922,7 +922,7 @@ * Second external micro SD card, using two TXB104RGYR levelshifters * to lift from 1.8 V to 2.85 V */ - sdcc@12200000 { + mmc@12200000 { status = "okay"; /* Enable SSBI GPIO 26 as input, use for card detect */ pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts index 3bce47d16ab3..9a835335bf78 100644 --- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts +++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts @@ -335,7 +335,7 @@ amba { /* eMMC */ - sdcc@12400000 { + mmc@12400000 { status = "okay"; vmmc-supply = <&pm8921_l5>; vqmmc-supply = <&pm8921_s4>; diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index 0148148a8e0a..e068a8d0adf0 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -220,14 +220,14 @@ amba { /* eMMC */ - sdcc1: sdcc@12400000 { + sdcc1: mmc@12400000 { status = "okay"; vmmc-supply = <&pm8921_l5>; vqmmc-supply = <&pm8921_s4>; }; /* External micro SD card */ - sdcc3: sdcc@12180000 { + sdcc3: mmc@12180000 { status = "okay"; vmmc-supply = <&v3p3_fixed>; pinctrl-names = "default"; @@ -235,7 +235,7 @@ cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; }; /* WLAN */ - sdcc4: sdcc@121c0000 { + sdcc4: mmc@121c0000 { status = "okay"; vmmc-supply = <&v3p3_fixed>; vqmmc-supply = <&v3p3_fixed>; diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index d0a17b5a5fa3..2638b380be20 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -314,14 +314,14 @@ amba { /* eMMC */ - sdcc1: sdcc@12400000 { + sdcc1: mmc@12400000 { status = "okay"; vmmc-supply = <&pm8921_l5>; vqmmc-supply = <&pm8921_s4>; }; /* External micro SD card */ - sdcc3: sdcc@12180000 { + sdcc3: mmc@12180000 { status = "okay"; vmmc-supply = <&pm8921_l6>; pinctrl-names = "default"; @@ -329,7 +329,7 @@ cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; }; /* WLAN */ - sdcc4: sdcc@121c0000 { + sdcc4: mmc@121c0000 { status = "okay"; vmmc-supply = <&ext_3p3v>; vqmmc-supply = <&pm8921_lvs1>; diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts index 72e47bdc5c12..f8c97efc61fc 100644 --- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts +++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts @@ -374,14 +374,14 @@ }; amba { - sdcc1: sdcc@12400000 { + sdcc1: mmc@12400000 { status = "okay"; vmmc-supply = <&pm8921_l5>; vqmmc-supply = <&pm8921_s4>; }; - sdcc3: sdcc@12180000 { + sdcc3: mmc@12180000 { status = "okay"; vmmc-supply = <&pm8921_l6>; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index d1c1c6aab2b8..4d562c94c31c 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -95,13 +95,13 @@ }; }; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x0>; }; thermal-zones { - cpu-thermal0 { + cpu0-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -122,7 +122,7 @@ }; }; - cpu-thermal1 { + cpu1-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -143,7 +143,7 @@ }; }; - cpu-thermal2 { + cpu2-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -164,7 +164,7 @@ }; }; - cpu-thermal3 { + cpu3-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -683,12 +683,11 @@ pm8821_mpps: mpps@50 { compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp"; reg = <0x50>; - interrupts = <24 IRQ_TYPE_NONE>, - <25 IRQ_TYPE_NONE>, - <26 IRQ_TYPE_NONE>, - <27 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pm8821_mpps 0 0 4>; }; }; }; @@ -726,19 +725,9 @@ reg = <0x50>; gpio-controller; #gpio-cells = <2>; - interrupts = - <128 IRQ_TYPE_NONE>, - <129 IRQ_TYPE_NONE>, - <130 IRQ_TYPE_NONE>, - <131 IRQ_TYPE_NONE>, - <132 IRQ_TYPE_NONE>, - <133 IRQ_TYPE_NONE>, - <134 IRQ_TYPE_NONE>, - <135 IRQ_TYPE_NONE>, - <136 IRQ_TYPE_NONE>, - <137 IRQ_TYPE_NONE>, - <138 IRQ_TYPE_NONE>, - <139 IRQ_TYPE_NONE>; + gpio-ranges = <&pm8921_mpps 0 0 12>; + interrupt-controller; + #interrupt-cells = <2>; }; rtc@11d { @@ -1084,7 +1073,7 @@ #address-cells = <1>; #size-cells = <1>; ranges; - sdcc1: sdcc@12400000 { + sdcc1: mmc@12400000 { status = "disabled"; compatible = "arm,pl18x", "arm,primecell"; pinctrl-names = "default"; @@ -1104,7 +1093,7 @@ dma-names = "tx", "rx"; }; - sdcc3: sdcc@12180000 { + sdcc3: mmc@12180000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; status = "disabled"; @@ -1122,7 +1111,7 @@ dma-names = "tx", "rx"; }; - sdcc4: sdcc@121c0000 { + sdcc4: mmc@121c0000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; status = "disabled"; @@ -1229,13 +1218,17 @@ &gfx3d1 30 &gfx3d1 31>; - qcom,gpu-pwrlevels { - compatible = "qcom,gpu-pwrlevels"; - qcom,gpu-pwrlevel@0 { - qcom,gpu-freq = <450000000>; + operating-points-v2 = <&gpu_opp_table>; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-320000000 { + opp-hz = /bits/ 64 <450000000>; }; - qcom,gpu-pwrlevel@1 { - qcom,gpu-freq = <27000000>; + + opp-27000000 { + opp-hz = /bits/ 64 <27000000>; }; }; }; @@ -1419,9 +1412,9 @@ clocks = <&mmcc HDMI_APP_CLK>, <&mmcc HDMI_M_AHB_CLK>, <&mmcc HDMI_S_AHB_CLK>; - clock-names = "core_clk", - "master_iface_clk", - "slave_iface_clk"; + clock-names = "core", + "master_iface", + "slave_iface"; phys = <&hdmi_phy>; phy-names = "hdmi-phy"; @@ -1452,7 +1445,7 @@ "hdmi_pll"; clocks = <&mmcc HDMI_S_AHB_CLK>; - clock-names = "slave_iface_clk"; + clock-names = "slave_iface"; #phy-cells = <0>; }; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index bf6a03506b45..52240fc7a1a6 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -102,7 +102,7 @@ }; thermal-zones { - cpu-thermal0 { + cpu0-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -122,7 +122,7 @@ }; }; - cpu-thermal1 { + cpu1-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -142,7 +142,7 @@ }; }; - cpu-thermal2 { + cpu2-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -162,7 +162,7 @@ }; }; - cpu-thermal3 { + cpu3-thermal { polling-delay-passive = <250>; polling-delay = <1000>; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts index 0d92f1bc3a13..ddaa273f72ca 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts @@ -18,5 +18,5 @@ / { model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1"; - + compatible = "qcom,ipq4019-ap-dk01.1-c1", "qcom,ipq4019"; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi index c93b2164db44..0c10d9e096db 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi @@ -18,7 +18,6 @@ / { model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1"; - compatible = "qcom,ipq4019"; aliases { serial0 = &blsp1_uart1; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts index b0f476ff017f..a7b1201dd614 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts @@ -5,7 +5,7 @@ / { model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C1"; - compatible = "qcom,ipq4019-dk04.1-c1"; + compatible = "qcom,ipq4019-dk04.1-c1", "qcom,ipq4019"; soc { dma@7984000 { diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts index 2d1c4c6e42f1..7765247125e4 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts @@ -5,5 +5,5 @@ / { model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C3"; - compatible = "qcom,ipq4019-ap-dk04.1-c3"; + compatible = "qcom,ipq4019-ap-dk04.1-c3", "qcom,ipq4019"; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts index f343a2244386..06f9f2cb2fe9 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts @@ -5,7 +5,7 @@ / { model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C1"; - compatible = "qcom,ipq4019-ap-dk07.1-c1"; + compatible = "qcom,ipq4019-ap-dk07.1-c1", "qcom,ipq4019"; soc { pci@40000000 { diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts index 582acb681a98..bd3553dd2070 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts @@ -5,7 +5,7 @@ / { model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C2"; - compatible = "qcom,ipq4019-ap-dk07.1-c2"; + compatible = "qcom,ipq4019-ap-dk07.1-c2", "qcom,ipq4019"; soc { pinctrl@1000000 { diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts index e5b9b9cf6097..b63d01d10189 100644 --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts @@ -3,7 +3,7 @@ / { model = "Qualcomm Technologies, Inc. IPQ8064/AP-148"; - compatible = "qcom,ipq8064-ap148"; + compatible = "qcom,ipq8064-ap148", "qcom,ipq8064"; soc { pinmux@800000 { diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts index f7ea2e5dd191..596d129d4a95 100644 --- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts @@ -19,12 +19,12 @@ stdout-path = "serial0:115200n8"; }; - memory@0 { + memory@42000000 { reg = <0x42000000 0x3e000000>; device_type = "memory"; }; - mdio0: mdio@0 { + mdio0: mdio-0 { status = "okay"; compatible = "virtual,mdio-gpio"; gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>, @@ -91,7 +91,7 @@ }; }; - mdio1: mdio@1 { + mdio1: mdio-1 { status = "okay"; compatible = "virtual,mdio-gpio"; gpios = <&qcom_pinmux 11 GPIO_ACTIVE_HIGH>, @@ -172,7 +172,7 @@ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - norflash: s25fl016k@0 { + norflash: flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 4139d3817bd6..11481313bdb6 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -49,7 +49,7 @@ }; thermal-zones { - tsens_tz_sensor0 { + sensor0-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens 0>; @@ -69,7 +69,7 @@ }; }; - tsens_tz_sensor1 { + sensor1-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens 1>; @@ -89,7 +89,7 @@ }; }; - tsens_tz_sensor2 { + sensor2-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens 2>; @@ -109,7 +109,7 @@ }; }; - tsens_tz_sensor3 { + sensor3-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens 3>; @@ -129,7 +129,7 @@ }; }; - tsens_tz_sensor4 { + sensor4-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens 4>; @@ -149,7 +149,7 @@ }; }; - tsens_tz_sensor5 { + sensor5-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens 5>; @@ -169,7 +169,7 @@ }; }; - tsens_tz_sensor6 { + sensor6-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens 6>; @@ -189,7 +189,7 @@ }; }; - tsens_tz_sensor7 { + sensor7-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens 7>; @@ -209,7 +209,7 @@ }; }; - tsens_tz_sensor8 { + sensor8-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens 8>; @@ -229,7 +229,7 @@ }; }; - tsens_tz_sensor9 { + sensor9-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens 9>; @@ -249,7 +249,7 @@ }; }; - tsens_tz_sensor10 { + sensor10-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens 10>; @@ -1181,7 +1181,7 @@ #size-cells = <1>; ranges; - sdcc1: sdcc@12400000 { + sdcc1: mmc@12400000 { status = "disabled"; compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; @@ -1201,7 +1201,7 @@ dma-names = "tx", "rx"; }; - sdcc3: sdcc@12180000 { + sdcc3: mmc@12180000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; status = "disabled"; diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi index a725b73b5a2e..10ad929759ed 100644 --- a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi @@ -49,7 +49,7 @@ model = "Sierra Wireless WP8548 Module"; compatible = "swir,wp8548", "qcom,mdm9615"; - memory { + memory@48000000 { device_type = "memory"; reg = <0x48000000 0x7F00000>; }; diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi index dda2ceec6591..c32415f0e66d 100644 --- a/arch/arm/boot/dts/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi @@ -300,18 +300,14 @@ pull-up; }; - pmicmpp: mpp@50 { + pmicmpp: mpps@50 { compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp"; - interrupt-parent = <&pmicintc>; - interrupts = <24 IRQ_TYPE_NONE>, - <25 IRQ_TYPE_NONE>, - <26 IRQ_TYPE_NONE>, - <27 IRQ_TYPE_NONE>, - <28 IRQ_TYPE_NONE>, - <29 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0x50>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pmicmpp 0 0 6>; }; rtc@11d { @@ -358,7 +354,7 @@ #address-cells = <1>; #size-cells = <1>; ranges; - sdcc1: sdcc@12180000 { + sdcc1: mmc@12180000 { status = "disabled"; compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; @@ -378,7 +374,7 @@ assigned-clock-rates = <400000>; }; - sdcc2: sdcc@12140000 { + sdcc2: mmc@12140000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; status = "disabled"; diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi index 2de69d56870d..7d48599502b3 100644 --- a/arch/arm/boot/dts/qcom-msm8226.dtsi +++ b/arch/arm/boot/dts/qcom-msm8226.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> +#include <dt-bindings/gpio/gpio.h> / { #address-cells = <1>; @@ -20,6 +21,70 @@ reg = <0x0 0x0>; }; + clocks { + xo_board: xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-msm8226", "qcom,scm"; + clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>; + clock-names = "core", "bus", "iface"; + }; + }; + + tcsr_mutex: hwlock { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_block 0 0x80>; + + #hwlock-cells = <1>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + smem_region: smem@3000000 { + reg = <0x3000000 0x100000>; + no-map; + }; + }; + + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-msm8226"; + qcom,smd-channels = "rpm_requests"; + }; + }; + }; + + smem { + compatible = "qcom,smem"; + + memory-region = <&smem_region>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + + hwlocks = <&tcsr_mutex 3>; + }; + soc: soc { compatible = "simple-bus"; #address-cells = <1>; @@ -34,6 +99,136 @@ #interrupt-cells = <3>; }; + apcs: syscon@f9011000 { + compatible = "syscon"; + reg = <0xf9011000 0x1000>; + }; + + sdhc_1: sdhci@f9824900 { + compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + status = "disabled"; + }; + + sdhc_2: sdhci@f98a4900 { + compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC2_APPS_CLK>, + <&gcc GCC_SDCC2_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + status = "disabled"; + }; + + sdhc_3: sdhci@f9864900 { + compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC3_APPS_CLK>, + <&gcc GCC_SDCC3_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + status = "disabled"; + }; + + blsp1_uart3: serial@f991f000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf991f000 0x1000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_uart4: serial@f9920000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf9920000 0x1000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_i2c1: i2c@f9923000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9923000 0x1000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_i2c1_pins>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c2: i2c@f9924000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9924000 0x1000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_i2c2_pins>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c3: i2c@f9925000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9925000 0x1000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_i2c3_pins>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c4: i2c@f9926000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9926000 0x1000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_i2c4_pins>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c5: i2c@f9927000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9927000 0x1000>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_i2c5_pins>; + #address-cells = <1>; + #size-cells = <0>; + }; + gcc: clock-controller@fc400000 { compatible = "qcom,gcc-msm8226"; reg = <0xfc400000 0x4000>; @@ -51,15 +246,41 @@ interrupt-controller; #interrupt-cells = <2>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - }; - blsp1_uart3: serial@f991f000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0xf991f000 0x1000>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - status = "disabled"; + blsp1_i2c1_pins: blsp1-i2c1 { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c2_pins: blsp1-i2c2 { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c3_pins: blsp1-i2c3 { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c4_pins: blsp1-i2c4 { + pins = "gpio14", "gpio15"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c5_pins: blsp1-i2c5 { + pins = "gpio18", "gpio19"; + function = "blsp_i2c5"; + drive-strength = <2>; + bias-disable; + }; }; restart@fc4ab000 { @@ -67,6 +288,22 @@ reg = <0xfc4ab000 0x4>; }; + spmi_bus: spmi@fc4cf000 { + compatible = "qcom,spmi-pmic-arb"; + reg-names = "core", "intr", "cnfg"; + reg = <0xfc4cf000 0x1000>, + <0xfc4cb000 0x1000>, + <0xfc4ca000 0x1000>; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + rng@f9bff000 { compatible = "qcom,prng"; reg = <0xf9bff000 0x200>; @@ -131,6 +368,16 @@ status = "disabled"; }; }; + + rpm_msg_ram: memory@fc428000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0xfc428000 0x4000>; + }; + + tcsr_mutex_block: syscon@fd484000 { + compatible = "syscon"; + reg = <0xfd484000 0x2000>; + }; }; timer { diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts index 6a321ccb0bd0..414280d9bdba 100644 --- a/arch/arm/boot/dts/qcom-msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts @@ -35,13 +35,13 @@ amba { /* eMMC */ - sdcc1: sdcc@12400000 { + sdcc1: mmc@12400000 { status = "okay"; vmmc-supply = <&vsdcc_fixed>; }; /* External micro SD card */ - sdcc3: sdcc@12180000 { + sdcc3: mmc@12180000 { status = "okay"; vmmc-supply = <&vsdcc_fixed>; }; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 480fc08cbe8e..1e8aab357f9c 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -307,20 +307,9 @@ reg = <0x50>; gpio-controller; #gpio-cells = <2>; - interrupt-parent = <&pm8058>; - interrupts = - <128 IRQ_TYPE_NONE>, - <129 IRQ_TYPE_NONE>, - <130 IRQ_TYPE_NONE>, - <131 IRQ_TYPE_NONE>, - <132 IRQ_TYPE_NONE>, - <133 IRQ_TYPE_NONE>, - <134 IRQ_TYPE_NONE>, - <135 IRQ_TYPE_NONE>, - <136 IRQ_TYPE_NONE>, - <137 IRQ_TYPE_NONE>, - <138 IRQ_TYPE_NONE>, - <139 IRQ_TYPE_NONE>; + gpio-ranges = <&pm8058_mpps 0 0 12>; + interrupt-controller; + #interrupt-cells = <2>; }; pwrkey@1c { @@ -494,7 +483,7 @@ #address-cells = <1>; #size-cells = <1>; ranges; - sdcc1: sdcc@12400000 { + sdcc1: mmc@12400000 { status = "disabled"; compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; @@ -510,7 +499,7 @@ cap-mmc-highspeed; }; - sdcc2: sdcc@12140000 { + sdcc2: mmc@12140000 { status = "disabled"; compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; @@ -525,7 +514,7 @@ cap-mmc-highspeed; }; - sdcc3: sdcc@12180000 { + sdcc3: mmc@12180000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; status = "disabled"; @@ -541,7 +530,7 @@ no-1-8-v; }; - sdcc4: sdcc@121c0000 { + sdcc4: mmc@121c0000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; status = "disabled"; @@ -556,7 +545,7 @@ cap-mmc-highspeed; }; - sdcc5: sdcc@12200000 { + sdcc5: mmc@12200000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; status = "disabled"; diff --git a/arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts b/arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts new file mode 100644 index 000000000000..dee2c20af355 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts @@ -0,0 +1,3 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "arm64/qcom/msm8916-samsung-serranove.dts" +#include "qcom-msm8916-smp.dtsi" diff --git a/arch/arm/boot/dts/qcom-msm8916-smp.dtsi b/arch/arm/boot/dts/qcom-msm8916-smp.dtsi new file mode 100644 index 000000000000..36328dbe4212 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8916-smp.dtsi @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/ { + cpus { + cpu@0 { + enable-method = "qcom,msm8916-smp"; + }; + cpu@1 { + enable-method = "qcom,msm8916-smp"; + }; + cpu@2 { + enable-method = "qcom,msm8916-smp"; + }; + cpu@3 { + enable-method = "qcom,msm8916-smp"; + }; + + idle-states { + /delete-property/ entry-method; + }; + }; + + psci { + status = "disabled"; + }; +}; + +&CPU_SLEEP_0 { + compatible = "qcom,idle-state-spc"; +}; + +&cpu0_acc { + status = "okay"; +}; + +&cpu0_saw { + status = "okay"; +}; + +&cpu1_acc { + status = "okay"; +}; + +&cpu1_saw { + status = "okay"; +}; + +&cpu2_acc { + status = "okay"; +}; + +&cpu2_saw { + status = "okay"; +}; + +&cpu3_acc { + status = "okay"; +}; + +&cpu3_saw { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts index e7d2e937ea4c..4af01039c3b2 100644 --- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts @@ -26,12 +26,12 @@ amba { /* eMMC */ - sdcc1: sdcc@12400000 { + sdcc1: mmc@12400000 { status = "okay"; }; /* External micro SD card */ - sdcc3: sdcc@12180000 { + sdcc3: mmc@12180000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index 172ea3c70eac..2a0ec97a264f 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -263,7 +263,7 @@ #address-cells = <1>; #size-cells = <1>; ranges; - sdcc1: sdcc@12400000 { + sdcc1: mmc@12400000 { status = "disabled"; compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; @@ -280,7 +280,7 @@ vmmc-supply = <&vsdcc_fixed>; }; - sdcc3: sdcc@12180000 { + sdcc3: mmc@12180000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; status = "disabled"; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 78ec496d5bc3..412d94736c35 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -142,7 +142,7 @@ }; thermal-zones { - cpu-thermal0 { + cpu0-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -162,7 +162,7 @@ }; }; - cpu-thermal1 { + cpu1-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -182,7 +182,7 @@ }; }; - cpu-thermal2 { + cpu2-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -202,7 +202,7 @@ }; }; - cpu-thermal3 { + cpu3-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -282,7 +282,7 @@ }; }; - gpu-thermal-top { + gpu-top-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -297,7 +297,7 @@ }; }; - gpu-thermal-bottom { + gpu-bottom-thermal { polling-delay-passive = <250>; polling-delay = <1000>; @@ -1589,8 +1589,8 @@ #phy-cells = <0>; qcom,dsi-phy-index = <0>; - clocks = <&mmcc MDSS_AHB_CLK>; - clock-names = "iface"; + clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>; + clock-names = "iface", "ref"; }; }; diff --git a/arch/arm/boot/dts/qcom-pm8226.dtsi b/arch/arm/boot/dts/qcom-pm8226.dtsi new file mode 100644 index 000000000000..dddb5150dfd7 --- /dev/null +++ b/arch/arm/boot/dts/qcom-pm8226.dtsi @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: BSD-3-Clause +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pm8226_0: pm8226@0 { + compatible = "qcom,pm8226", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pwrkey@800 { + compatible = "qcom,pm8941-pwrkey"; + reg = <0x800>; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + }; + }; + + pm8226_1: pm8226@1 { + compatible = "qcom,pm8226", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm/boot/dts/qcom-pm8841.dtsi b/arch/arm/boot/dts/qcom-pm8841.dtsi index 2fd59c440903..2caf71eacb52 100644 --- a/arch/arm/boot/dts/qcom-pm8841.dtsi +++ b/arch/arm/boot/dts/qcom-pm8841.dtsi @@ -15,10 +15,9 @@ reg = <0xa000>; gpio-controller; #gpio-cells = <2>; - interrupts = <4 0xa0 0 IRQ_TYPE_NONE>, - <4 0xa1 0 IRQ_TYPE_NONE>, - <4 0xa2 0 IRQ_TYPE_NONE>, - <4 0xa3 0 IRQ_TYPE_NONE>; + gpio-ranges = <&pm8841_mpps 0 0 4>; + interrupt-controller; + #interrupt-cells = <2>; }; temp-alarm@2400 { diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index c1f2012d1c8b..da00b8f5eecd 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -79,14 +79,9 @@ reg = <0xa000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, - <0 0xa1 0 IRQ_TYPE_NONE>, - <0 0xa2 0 IRQ_TYPE_NONE>, - <0 0xa3 0 IRQ_TYPE_NONE>, - <0 0xa4 0 IRQ_TYPE_NONE>, - <0 0xa5 0 IRQ_TYPE_NONE>, - <0 0xa6 0 IRQ_TYPE_NONE>, - <0 0xa7 0 IRQ_TYPE_NONE>; + gpio-ranges = <&pm8941_mpps 0 0 8>; + interrupt-controller; + #interrupt-cells = <2>; }; pm8941_temp: temp-alarm@2400 { diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi index e921c5e93a5d..7b8a8d9695da 100644 --- a/arch/arm/boot/dts/qcom-pma8084.dtsi +++ b/arch/arm/boot/dts/qcom-pma8084.dtsi @@ -42,14 +42,9 @@ reg = <0xa000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, - <0 0xa1 0 IRQ_TYPE_NONE>, - <0 0xa2 0 IRQ_TYPE_NONE>, - <0 0xa3 0 IRQ_TYPE_NONE>, - <0 0xa4 0 IRQ_TYPE_NONE>, - <0 0xa5 0 IRQ_TYPE_NONE>, - <0 0xa6 0 IRQ_TYPE_NONE>, - <0 0xa7 0 IRQ_TYPE_NONE>; + gpio-ranges = <&pma8084_mpps 0 0 8>; + interrupt-controller; + #interrupt-cells = <2>; }; pma8084_temp: temp-alarm@2400 { diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi index 1e6ce035f76a..44526ad9d210 100644 --- a/arch/arm/boot/dts/qcom-sdx55.dtsi +++ b/arch/arm/boot/dts/qcom-sdx55.dtsi @@ -228,7 +228,6 @@ compatible = "qcom,sdx55-qmp-usb3-uni-phy"; reg = <0x00ff6000 0x1c0>; status = "disabled"; - #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts index 07d611d2b7b5..1e8447176b10 100644 --- a/arch/arm/boot/dts/r7s72100-genmai.dts +++ b/arch/arm/boot/dts/r7s72100-genmai.dts @@ -108,6 +108,8 @@ renesas,no-ether-link; phy-handle = <&phy0>; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-idb824.2814", + "ethernet-phy-ieee802.3-c22"; reg = <0>; }; }; diff --git a/arch/arm/boot/dts/r7s72100-gr-peach.dts b/arch/arm/boot/dts/r7s72100-gr-peach.dts index 2562cc9b5356..105f9c71f9fd 100644 --- a/arch/arm/boot/dts/r7s72100-gr-peach.dts +++ b/arch/arm/boot/dts/r7s72100-gr-peach.dts @@ -129,6 +129,8 @@ phy-handle = <&phy0>; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0007.c0f0", + "ethernet-phy-ieee802.3-c22"; reg = <0>; reset-gpios = <&port4 2 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts index 99acfe4fe11a..1c5acf694407 100644 --- a/arch/arm/boot/dts/r7s72100-rskrza1.dts +++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts @@ -192,6 +192,8 @@ renesas,no-ether-link; phy-handle = <&phy0>; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-idb824.2814", + "ethernet-phy-ieee802.3-c22"; reg = <0>; }; }; diff --git a/arch/arm/boot/dts/r7s9210-rza2mevb.dts b/arch/arm/boot/dts/r7s9210-rza2mevb.dts index 68498ce2aec0..9c0d9686fe01 100644 --- a/arch/arm/boot/dts/r7s9210-rza2mevb.dts +++ b/arch/arm/boot/dts/r7s9210-rza2mevb.dts @@ -100,6 +100,8 @@ renesas,no-ether-link; phy-handle = <&phy1>; phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id001c.c816", + "ethernet-phy-ieee802.3-c22"; reg = <0>; }; }; @@ -109,6 +111,20 @@ clock-frequency = <24000000>; /* 24MHz */ }; +&i2c3 { + status = "okay"; + clock-frequency = <400000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + + eeprom@50 { + compatible = "renesas,r1ex24128", "atmel,24c128"; + reg = <0x50>; + pagesize = <64>; + }; +}; + /* High resolution System tick timers */ &ostm0 { status = "okay"; @@ -147,6 +163,11 @@ <RZA2_PINMUX(PORTL, 1, 5)>; /* IRQ5 */ }; + i2c3_pins: i2c3 { + pinmux = <RZA2_PINMUX(PORTD, 6, 1)>, /* RIIC3SCL */ + <RZA2_PINMUX(PORTD, 7, 1)>; /* RIIC3SDA */ + }; + keyboard_pins: keyboard { pinmux = <RZA2_PINMUX(PORTJ, 1, 6)>; /* IRQ0 */ }; diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index b088e8e351d5..e81a7213d304 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -199,6 +199,7 @@ reg-io-width = <4>; smsc,irq-active-high; smsc,irq-push-pull; + reset-gpios = <&pfc 270 GPIO_ACTIVE_LOW>; vdd33a-supply = <&ape6evm_fixed_3v3>; vddvario-supply = <&ape6evm_fixed_1v8>; }; diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index d960c2767f61..a01f3def1c69 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -170,7 +170,10 @@ status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0007.c0f1", + "ethernet-phy-ieee802.3-c22"; reg = <0>; + reset-gpios = <&pfc 18 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts index 2bcb229844ab..33db5938f2d4 100644 --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts @@ -66,6 +66,8 @@ status = "okay"; phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1560", + "ethernet-phy-ieee802.3-c22"; reg = <1>; micrel,led-mode = <1>; }; diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts index 94bf8a116b52..a5a79cdbcd0e 100644 --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts @@ -175,6 +175,8 @@ status = "okay"; phy3: ethernet-phy@3 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; reg = <3>; micrel,led-mode = <1>; }; diff --git a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts index 4ace117470e8..ff274bfcb664 100644 --- a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts +++ b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "r8a7743.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "SK-RZG1M"; @@ -69,9 +70,12 @@ status = "okay"; phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1537", + "ethernet-phy-ieee802.3-c22"; reg = <1>; interrupt-parent = <&irqc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; + reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts index 73bd62d8a929..c105932f642e 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts @@ -123,6 +123,8 @@ * On some older versions of the platform (before R4.0) the phy address * may be 1 or 3. The address is fixed to 3 for R4.0 onwards. */ + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; reg = <3>; micrel,led-mode = <1>; }; diff --git a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts index 59d1a9bfab05..0a75e8c79acc 100644 --- a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts +++ b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "r8a7745.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "SK-RZG1E"; @@ -64,9 +65,12 @@ status = "okay"; phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1537", + "ethernet-phy-ieee802.3-c22"; reg = <1>; interrupt-parent = <&irqc>; interrupts = <8 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; + reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts index 8ac61b50aec0..b024621c9981 100644 --- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts +++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts @@ -79,6 +79,8 @@ status = "okay"; phy3: ethernet-phy@3 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; reg = <3>; interrupt-parent = <&gpio5>; interrupts = <16 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts index 6c7b07c4b9d3..9b65d246e583 100644 --- a/arch/arm/boot/dts/r8a7778-bockw.dts +++ b/arch/arm/boot/dts/r8a7778-bockw.dts @@ -63,7 +63,7 @@ &bsc { ethernet@18300000 { - compatible = "smsc,lan9220", "smsc,lan9115"; + compatible = "smsc,lan89218", "smsc,lan9115"; reg = <0x18300000 0x1000>; phy-mode = "mii"; diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index 465845323495..5f05f2b44a48 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -52,7 +52,7 @@ }; ethernet@18000000 { - compatible = "smsc,lan9220", "smsc,lan9115"; + compatible = "smsc,lan89218", "smsc,lan9115"; reg = <0x18000000 0x100>; pinctrl-0 = <ðernet_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index fa6d986b5d46..57cd2fa72249 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -678,6 +678,8 @@ status = "okay"; phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1537", + "ethernet-phy-ieee802.3-c22"; reg = <1>; interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/r8a7790-stout.dts index d51f23572d7f..c802f9f13c18 100644 --- a/arch/arm/boot/dts/r8a7790-stout.dts +++ b/arch/arm/boot/dts/r8a7790-stout.dts @@ -199,6 +199,8 @@ status = "okay"; phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1537", + "ethernet-phy-ieee802.3-c22"; reg = <1>; interrupt-parent = <&irqc0>; interrupts = <1 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 2a8b6fd9095c..6e691b6cac05 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -637,6 +637,8 @@ status = "okay"; phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1537", + "ethernet-phy-ieee802.3-c22"; reg = <1>; interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index c6ef636965c1..38e2ab928707 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -302,6 +302,8 @@ status = "okay"; phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1537", + "ethernet-phy-ieee802.3-c22"; reg = <1>; interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index 479e0fdf0c37..c8978f4f62e9 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -595,6 +595,8 @@ status = "okay"; phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1537", + "ethernet-phy-ieee802.3-c22"; reg = <1>; interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index f330d796a772..99d554fe3329 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -383,6 +383,8 @@ status = "okay"; phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1537", + "ethernet-phy-ieee802.3-c22"; reg = <1>; interrupt-parent = <&irqc0>; interrupts = <8 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index cafa3046daa4..92a76164432a 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -397,6 +397,8 @@ status = "okay"; phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1537", + "ethernet-phy-ieee802.3-c22"; reg = <1>; interrupt-parent = <&irqc0>; interrupts = <8 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index ffa9bc7ed3d0..ba2b8891bbb7 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -416,8 +416,8 @@ compatible = "rockchip,rk3036-timer", "rockchip,rk3288-timer"; reg = <0x20044000 0x20>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&xin24m>, <&cru PCLK_TIMER>; - clock-names = "timer", "pclk"; + clocks = <&cru PCLK_TIMER>, <&xin24m>; + clock-names = "pclk", "timer"; }; pwm0: pwm@20050000 { @@ -575,7 +575,7 @@ #size-cells = <1>; ranges; - gpio0: gpio0@2007c000 { + gpio0: gpio@2007c000 { compatible = "rockchip,gpio-bank"; reg = <0x2007c000 0x100>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; @@ -588,7 +588,7 @@ #interrupt-cells = <2>; }; - gpio1: gpio1@20080000 { + gpio1: gpio@20080000 { compatible = "rockchip,gpio-bank"; reg = <0x20080000 0x100>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; @@ -601,7 +601,7 @@ #interrupt-cells = <2>; }; - gpio2: gpio2@20084000 { + gpio2: gpio@20084000 { compatible = "rockchip,gpio-bank"; reg = <0x20084000 0x100>; interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts index 9790bc63b50a..667d57a4ff45 100644 --- a/arch/arm/boot/dts/rk3066a-mk808.dts +++ b/arch/arm/boot/dts/rk3066a-mk808.dts @@ -4,6 +4,7 @@ */ /dts-v1/; +#include <dt-bindings/input/input.h> #include "rk3066a.dtsi" / { @@ -24,6 +25,20 @@ device_type = "memory"; }; + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <2500000>; + poll-interval = <100>; + + recovery { + label = "recovery"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <0>; + }; + }; + gpio-leds { compatible = "gpio-leds"; @@ -46,6 +61,13 @@ }; }; + vcc_2v5: vcc-2v5 { + compatible = "regulator-fixed"; + regulator-name = "vcc_2v5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + vcc_io: vcc-io { compatible = "regulator-fixed"; regulator-name = "vcc_io"; @@ -164,6 +186,11 @@ }; }; +&saradc { + vref-supply = <&vcc_2v5>; + status = "okay"; +}; + &uart2 { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index ae4055428c5e..c25b9695db4b 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -23,16 +23,15 @@ compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <0x0>; - operating-points = < + operating-points = /* kHz uV */ - 1416000 1300000 - 1200000 1175000 - 1008000 1125000 - 816000 1125000 - 600000 1100000 - 504000 1100000 - 312000 1075000 - >; + <1416000 1300000>, + <1200000 1175000>, + <1008000 1125000>, + <816000 1125000>, + <600000 1100000>, + <504000 1100000>, + <312000 1075000>; clock-latency = <40000>; clocks = <&cru ARMCLK>; }; @@ -273,7 +272,7 @@ #size-cells = <1>; ranges; - gpio0: gpio0@20034000 { + gpio0: gpio@20034000 { compatible = "rockchip,gpio-bank"; reg = <0x20034000 0x100>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; @@ -286,7 +285,7 @@ #interrupt-cells = <2>; }; - gpio1: gpio1@2003c000 { + gpio1: gpio@2003c000 { compatible = "rockchip,gpio-bank"; reg = <0x2003c000 0x100>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; @@ -299,7 +298,7 @@ #interrupt-cells = <2>; }; - gpio2: gpio2@2003e000 { + gpio2: gpio@2003e000 { compatible = "rockchip,gpio-bank"; reg = <0x2003e000 0x100>; interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; @@ -312,7 +311,7 @@ #interrupt-cells = <2>; }; - gpio3: gpio3@20080000 { + gpio3: gpio@20080000 { compatible = "rockchip,gpio-bank"; reg = <0x20080000 0x100>; interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; @@ -325,7 +324,7 @@ #interrupt-cells = <2>; }; - gpio4: gpio4@20084000 { + gpio4: gpio@20084000 { compatible = "rockchip,gpio-bank"; reg = <0x20084000 0x100>; interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; @@ -338,7 +337,7 @@ #interrupt-cells = <2>; }; - gpio6: gpio6@2000a000 { + gpio6: gpio@2000a000 { compatible = "rockchip,gpio-bank"; reg = <0x2000a000 0x100>; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; @@ -682,8 +681,7 @@ compatible = "rockchip,rk3066-grf", "syscon", "simple-mfd"; usbphy: usbphy { - compatible = "rockchip,rk3066a-usb-phy", - "rockchip,rk3288-usb-phy"; + compatible = "rockchip,rk3066a-usb-phy"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 2c606494b78c..a94321e90014 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -54,7 +54,7 @@ }; }; - cpu0_opp_table: opp_table0 { + cpu0_opp_table: opp-table-0 { compatible = "operating-points-v2"; opp-shared; @@ -223,7 +223,7 @@ #size-cells = <1>; ranges; - gpio0: gpio0@2000a000 { + gpio0: gpio@2000a000 { compatible = "rockchip,rk3188-gpio-bank0"; reg = <0x2000a000 0x100>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; @@ -236,7 +236,7 @@ #interrupt-cells = <2>; }; - gpio1: gpio1@2003c000 { + gpio1: gpio@2003c000 { compatible = "rockchip,gpio-bank"; reg = <0x2003c000 0x100>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; @@ -249,7 +249,7 @@ #interrupt-cells = <2>; }; - gpio2: gpio2@2003e000 { + gpio2: gpio@2003e000 { compatible = "rockchip,gpio-bank"; reg = <0x2003e000 0x100>; interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; @@ -262,7 +262,7 @@ #interrupt-cells = <2>; }; - gpio3: gpio3@20080000 { + gpio3: gpio@20080000 { compatible = "rockchip,gpio-bank"; reg = <0x20080000 0x100>; interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; @@ -647,8 +647,7 @@ }; usbphy: usbphy { - compatible = "rockchip,rk3188-usb-phy", - "rockchip,rk3288-usb-phy"; + compatible = "rockchip,rk3188-usb-phy"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; diff --git a/arch/arm/boot/dts/rk3229.dtsi b/arch/arm/boot/dts/rk3229.dtsi index cb7d3fad8e60..c340fb30e775 100644 --- a/arch/arm/boot/dts/rk3229.dtsi +++ b/arch/arm/boot/dts/rk3229.dtsi @@ -10,7 +10,7 @@ /delete-node/ opp-table0; - cpu0_opp_table: opp_table0 { + cpu0_opp_table: opp-table-0 { compatible = "operating-points-v2"; opp-shared; diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 75af99c76d7e..8eed9e3a92e9 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -68,7 +68,7 @@ }; }; - cpu0_opp_table: opp_table0 { + cpu0_opp_table: opp-table-0 { compatible = "operating-points-v2"; opp-shared; @@ -477,8 +477,8 @@ compatible = "rockchip,rk3228-timer", "rockchip,rk3288-timer"; reg = <0x110c0000 0x20>; interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&xin24m>, <&cru PCLK_TIMER>; - clock-names = "timer", "pclk"; + clocks = <&cru PCLK_TIMER>, <&xin24m>; + clock-names = "pclk", "timer"; }; cru: clock-controller@110e0000 { @@ -946,7 +946,7 @@ #size-cells = <1>; ranges; - gpio0: gpio0@11110000 { + gpio0: gpio@11110000 { compatible = "rockchip,gpio-bank"; reg = <0x11110000 0x100>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; @@ -959,7 +959,7 @@ #interrupt-cells = <2>; }; - gpio1: gpio1@11120000 { + gpio1: gpio@11120000 { compatible = "rockchip,gpio-bank"; reg = <0x11120000 0x100>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; @@ -972,7 +972,7 @@ #interrupt-cells = <2>; }; - gpio2: gpio2@11130000 { + gpio2: gpio@11130000 { compatible = "rockchip,gpio-bank"; reg = <0x11130000 0x100>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; @@ -985,7 +985,7 @@ #interrupt-cells = <2>; }; - gpio3: gpio3@11140000 { + gpio3: gpio@11140000 { compatible = "rockchip,gpio-bank"; reg = <0x11140000 0x100>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 4dcdcf17c977..aaaa61875701 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -100,7 +100,7 @@ }; }; - cpu_opp_table: cpu-opp-table { + cpu_opp_table: opp-table-0 { compatible = "operating-points-v2"; opp-shared; @@ -1278,7 +1278,7 @@ status = "disabled"; }; - gpu_opp_table: gpu-opp-table { + gpu_opp_table: opp-table-1 { compatible = "operating-points-v2"; opp-100000000 { @@ -1422,7 +1422,7 @@ #size-cells = <2>; ranges; - gpio0: gpio0@ff750000 { + gpio0: gpio@ff750000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff750000 0x0 0x100>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; @@ -1435,7 +1435,7 @@ #interrupt-cells = <2>; }; - gpio1: gpio1@ff780000 { + gpio1: gpio@ff780000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff780000 0x0 0x100>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; @@ -1448,7 +1448,7 @@ #interrupt-cells = <2>; }; - gpio2: gpio2@ff790000 { + gpio2: gpio@ff790000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff790000 0x0 0x100>; interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; @@ -1461,7 +1461,7 @@ #interrupt-cells = <2>; }; - gpio3: gpio3@ff7a0000 { + gpio3: gpio@ff7a0000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff7a0000 0x0 0x100>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; @@ -1474,7 +1474,7 @@ #interrupt-cells = <2>; }; - gpio4: gpio4@ff7b0000 { + gpio4: gpio@ff7b0000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff7b0000 0x0 0x100>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; @@ -1487,7 +1487,7 @@ #interrupt-cells = <2>; }; - gpio5: gpio5@ff7c0000 { + gpio5: gpio@ff7c0000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff7c0000 0x0 0x100>; interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; @@ -1500,7 +1500,7 @@ #interrupt-cells = <2>; }; - gpio6: gpio6@ff7d0000 { + gpio6: gpio@ff7d0000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff7d0000 0x0 0x100>; interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; @@ -1513,7 +1513,7 @@ #interrupt-cells = <2>; }; - gpio7: gpio7@ff7e0000 { + gpio7: gpio@ff7e0000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff7e0000 0x0 0x100>; interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; @@ -1526,7 +1526,7 @@ #interrupt-cells = <2>; }; - gpio8: gpio8@ff7f0000 { + gpio8: gpio@ff7f0000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff7f0000 0x0 0x100>; interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi index 24d56849af46..448254906452 100644 --- a/arch/arm/boot/dts/rv1108.dtsi +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -40,7 +40,7 @@ }; }; - cpu_opp_table: opp_table { + cpu_opp_table: opp-table-0 { compatible = "operating-points-v2"; opp-408000000 { @@ -300,8 +300,8 @@ compatible = "rockchip,rv1108-timer", "rockchip,rk3288-timer"; reg = <0x10350000 0x20>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&xin24m>, <&cru PCLK_TIMER>; - clock-names = "timer", "pclk"; + clocks = <&cru PCLK_TIMER>, <&xin24m>; + clock-names = "pclk", "timer"; }; watchdog: watchdog@10360000 { @@ -557,7 +557,7 @@ status = "disabled"; }; - gmac: eth@30200000 { + gmac: ethernet@30200000 { compatible = "rockchip,rv1108-gmac"; reg = <0x30200000 0x10000>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, @@ -600,7 +600,7 @@ #size-cells = <1>; ranges; - gpio0: gpio0@20030000 { + gpio0: gpio@20030000 { compatible = "rockchip,gpio-bank"; reg = <0x20030000 0x100>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; @@ -613,7 +613,7 @@ #interrupt-cells = <2>; }; - gpio1: gpio1@10310000 { + gpio1: gpio@10310000 { compatible = "rockchip,gpio-bank"; reg = <0x10310000 0x100>; interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; @@ -626,7 +626,7 @@ #interrupt-cells = <2>; }; - gpio2: gpio2@10320000 { + gpio2: gpio@10320000 { compatible = "rockchip,gpio-bank"; reg = <0x10320000 0x100>; interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; @@ -639,7 +639,7 @@ #interrupt-cells = <2>; }; - gpio3: gpio3@10330000 { + gpio3: gpio@10330000 { compatible = "rockchip,gpio-bank"; reg = <0x10330000 0x100>; interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts index b47d8300e536..7427c84f1126 100644 --- a/arch/arm/boot/dts/s5pv210-fascinate4g.dts +++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts @@ -8,6 +8,7 @@ / { model = "Samsung Galaxy S Fascinate 4G (SGH-T959P) based on S5PV210"; compatible = "samsung,fascinate4g", "samsung,aries", "samsung,s5pv210"; + chassis-type = "handset"; chosen { stdout-path = &uart2; diff --git a/arch/arm/boot/dts/s5pv210-galaxys.dts b/arch/arm/boot/dts/s5pv210-galaxys.dts index 560f830b6f6b..eeec2bdece11 100644 --- a/arch/arm/boot/dts/s5pv210-galaxys.dts +++ b/arch/arm/boot/dts/s5pv210-galaxys.dts @@ -8,6 +8,7 @@ / { model = "Samsung Galaxy S1 (GT-I9000) based on S5PV210"; compatible = "samsung,galaxys", "samsung,aries", "samsung,s5pv210"; + chassis-type = "handset"; chosen { stdout-path = &uart2; diff --git a/arch/arm/boot/dts/sama5d29.dtsi b/arch/arm/boot/dts/sama5d29.dtsi new file mode 100644 index 000000000000..17991c28a256 --- /dev/null +++ b/arch/arm/boot/dts/sama5d29.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * sama5d29.dtsi - Device Tree Include file for SAMA5D29 SoC of the SAMA5D2 + * family. + * + * Copyright (C) 2021 Microchip Technology, Inc. and its subsidiaries + * + * Author: Hari Prasath <Hari.PrasathGE@microchip.com> + * + */ + +#include "sama5d2.dtsi" + +&macb0 { + compatible = "atmel,sama5d29-gem"; +}; diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi index 6c58c151c6d9..7039311bf678 100644 --- a/arch/arm/boot/dts/sama7g5.dtsi +++ b/arch/arm/boot/dts/sama7g5.dtsi @@ -152,6 +152,13 @@ reg = <0xe001d060 0x48>; }; + rtc: rtc@e001d0a8 { + compatible = "microchip,sama7g5-rtc", "microchip,sam9x60-rtc"; + reg = <0xe001d0a8 0x30>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk32k 1>; + }; + ps_wdt: watchdog@e001d180 { compatible = "microchip,sama7g5-wdt"; reg = <0xe001d180 0x24>; @@ -164,6 +171,32 @@ reg = <0xe0020000 0x8>; }; + tcb1: timer@e0800000 { + compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe0800000 0x100>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 91>, <&pmc PMC_TYPE_PERIPHERAL 92>, <&pmc PMC_TYPE_PERIPHERAL 93>, <&clk32k 1>; + clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; + }; + + adc: adc@e1000000 { + compatible = "microchip,sama7g5-adc"; + reg = <0xe1000000 0x200>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_GCK 26>; + assigned-clocks = <&pmc PMC_TYPE_GCK 26>; + assigned-clock-rates = <100000000>; + clock-names = "adc_clk"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(0)>; + dma-names = "rx"; + atmel,min-sample-rate-hz = <200000>; + atmel,max-sample-rate-hz = <20000000>; + atmel,startup-time-ms = <4>; + status = "disabled"; + }; + sdmmc0: mmc@e1204000 { compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci"; reg = <0xe1204000 0x4000>; @@ -465,6 +498,16 @@ status = "disabled"; }; + tcb0: timer@e2814000 { + compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe2814000 0x100>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 88>, <&pmc PMC_TYPE_PERIPHERAL 89>, <&pmc PMC_TYPE_PERIPHERAL 90>, <&clk32k 1>; + clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; + }; + flx8: flexcom@e2818000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xe2818000 0x200>; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts index 5a8d92a061df..98897f710063 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts @@ -169,7 +169,7 @@ &bsc { ethernet@10000000 { - compatible = "smsc,lan9220", "smsc,lan9115"; + compatible = "smsc,lan9221", "smsc,lan9115"; reg = <0x10000000 0x100>; phy-mode = "mii"; interrupt-parent = <&irqpin0>; diff --git a/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts b/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts new file mode 100644 index 000000000000..2a3364b26361 --- /dev/null +++ b/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "socfpga_arria10.dtsi" + +/ { + + model = "Enclustra Mercury AA1"; + compatible = "altr,socfpga-arria10", "altr,socfpga"; + + aliases { + ethernet0 = &gmac0; + serial1 = &uart1; + i2c0 = &i2c0; + i2c1 = &i2c1; + }; + + memory@0 { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x80000000>; /* 2GB */ + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; +}; + +&eccmgr { + sdmmca-ecc@ff8c2c00 { + compatible = "altr,socfpga-sdmmc-ecc"; + reg = <0xff8c2c00 0x400>; + altr,ecc-parent = <&mmc>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH>, + <47 IRQ_TYPE_LEVEL_HIGH>, + <16 IRQ_TYPE_LEVEL_HIGH>, + <48 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&gmac0 { + phy-mode = "rgmii"; + phy-addr = <0xffffffff>; /* probe for phy addr */ + + max-frame-size = <3800>; + status = "okay"; + + phy-handle = <&phy3>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy3: ethernet-phy@3 { + txd0-skew-ps = <0>; /* -420ps */ + txd1-skew-ps = <0>; /* -420ps */ + txd2-skew-ps = <0>; /* -420ps */ + txd3-skew-ps = <0>; /* -420ps */ + rxd0-skew-ps = <420>; /* 0ps */ + rxd1-skew-ps = <420>; /* 0ps */ + rxd2-skew-ps = <420>; /* 0ps */ + rxd3-skew-ps = <420>; /* 0ps */ + txen-skew-ps = <0>; /* -420ps */ + txc-skew-ps = <1860>; /* 960ps */ + rxdv-skew-ps = <420>; /* 0ps */ + rxc-skew-ps = <1680>; /* 780ps */ + reg = <3>; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + isl12022: isl12022@6f { + status = "okay"; + compatible = "isil,isl12022"; + reg = <0x6f>; + }; +}; + +/* Following mappings are taken from arria10 socdk dts */ +&mmc { + status = "okay"; + cap-sd-highspeed; + broken-cd; + bus-width = <4>; +}; + +&osc1 { + clock-frequency = <33330000>; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi index c4b49baf9804..2f746a9428a7 100644 --- a/arch/arm/boot/dts/spear1310.dtsi +++ b/arch/arm/boot/dts/spear1310.dtsi @@ -82,8 +82,6 @@ reg = <0xb1000000 0x4000>, <0x80000000 0x20000>; reg-names = "dbi", "config"; interrupts = <0 68 0x4>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0x0 0 &gic 0 68 0x4>; num-lanes = <1>; phys = <&miphy0 1>; phy-names = "pcie-phy"; @@ -101,8 +99,6 @@ reg = <0xb1800000 0x4000>, <0x90000000 0x20000>; reg-names = "dbi", "config"; interrupts = <0 69 0x4>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0x0 0 &gic 0 69 0x4>; num-lanes = <1>; phys = <&miphy1 1>; phy-names = "pcie-phy"; @@ -120,8 +116,6 @@ reg = <0xb4000000 0x4000>, <0xc0000000 0x20000>; reg-names = "dbi", "config"; interrupts = <0 70 0x4>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0x0 0 &gic 0 70 0x4>; num-lanes = <1>; phys = <&miphy2 1>; phy-names = "pcie-phy"; diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index 1a8f5e8b10e3..827e887afbda 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -47,8 +47,6 @@ reg = <0xb1000000 0x4000>, <0x80000000 0x20000>; reg-names = "dbi", "config"; interrupts = <0 68 0x4>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0x0 0 &gic 0 68 0x4>; num-lanes = <1>; phys = <&miphy0 1>; phy-names = "pcie-phy"; diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi index 9baf927f9b95..2cf19386a525 100644 --- a/arch/arm/boot/dts/ste-ab8500.dtsi +++ b/arch/arm/boot/dts/ste-ab8500.dtsi @@ -129,11 +129,6 @@ io-channel-names = "aux1", "aux2"; }; - ab8500_battery: ab8500_battery { - stericsson,battery-type = "LIPO"; - thermistor-on-batctrl; - }; - ab8500_fg { compatible = "stericsson,ab8500-fg"; interrupts = <24 IRQ_TYPE_LEVEL_HIGH>, @@ -146,7 +141,7 @@ "LOW_BAT_F", "CC_INT_CALIB", "CCEOC"; - battery = <&ab8500_battery>; + monitored-battery = <&battery>; io-channels = <&gpadc 0x08>; io-channel-names = "main_bat_v"; }; @@ -163,7 +158,7 @@ "BTEMP_HIGH", "BTEMP_LOW_MEDIUM", "BTEMP_MEDIUM_HIGH"; - battery = <&ab8500_battery>; + monitored-battery = <&battery>; io-channels = <&gpadc 0x02>, <&gpadc 0x01>; io-channel-names = "btemp_ball", @@ -200,7 +195,7 @@ "VBUS_OVV", "CH_WD_EXP", "VBUS_CH_DROP_END"; - battery = <&ab8500_battery>; + monitored-battery = <&battery>; vddadc-supply = <&ab8500_ldo_tvout_reg>; io-channels = <&gpadc 0x03>, <&gpadc 0x0a>, @@ -214,7 +209,7 @@ ab8500_chargalg { compatible = "stericsson,ab8500-chargalg"; - battery = <&ab8500_battery>; + monitored-battery = <&battery>; }; ab8500_usb: ab8500_usb { diff --git a/arch/arm/boot/dts/ste-ab8505.dtsi b/arch/arm/boot/dts/ste-ab8505.dtsi index 8d018701a680..e98335e9d1cb 100644 --- a/arch/arm/boot/dts/ste-ab8505.dtsi +++ b/arch/arm/boot/dts/ste-ab8505.dtsi @@ -92,11 +92,6 @@ }; }; - ab8500_battery: ab8500_battery { - stericsson,battery-type = "LIPO"; - thermistor-on-batctrl; - }; - ab8500_fg { status = "disabled"; compatible = "stericsson,ab8500-fg"; @@ -110,7 +105,7 @@ "LOW_BAT_F", "CC_INT_CALIB", "CCEOC"; - battery = <&ab8500_battery>; + monitored-battery = <&battery>; io-channels = <&gpadc 0x08>; io-channel-names = "main_bat_v"; }; @@ -128,7 +123,7 @@ "BTEMP_HIGH", "BTEMP_LOW_MEDIUM", "BTEMP_MEDIUM_HIGH"; - battery = <&ab8500_battery>; + monitored-battery = <&battery>; io-channels = <&gpadc 0x02>, <&gpadc 0x01>; io-channel-names = "btemp_ball", @@ -166,7 +161,7 @@ "VBUS_OVV", "CH_WD_EXP", "VBUS_CH_DROP_END"; - battery = <&ab8500_battery>; + monitored-battery = <&battery>; vddadc-supply = <&ab8500_ldo_adc_reg>; io-channels = <&gpadc 0x09>, <&gpadc 0x0b>; @@ -177,7 +172,7 @@ ab8500_chargalg { status = "disabled"; compatible = "stericsson,ab8500-chargalg"; - battery = <&ab8500_battery>; + monitored-battery = <&battery>; }; ab8500_usb: ab8500_usb { diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 961f2c7274ce..718752a0248e 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -13,6 +13,12 @@ reg = <0x00000000 0x20000000>; }; + battery: battery { + compatible = "simple-battery"; + battery-type = "lithium-ion-polymer"; + thermistor-on-batctrl; + }; + soc { uart@80120000 { pinctrl-names = "default", "sleep"; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 934fc788fe1d..fb719c8a8eb2 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -17,6 +17,12 @@ reg = <0x00000000 0x20000000>; }; + battery: battery { + compatible = "simple-battery"; + battery-type = "lithium-ion-polymer"; + thermistor-on-batctrl; + }; + en_3v3_reg: en_3v3 { compatible = "regulator-fixed"; regulator-name = "en-3v3-fixed-supply"; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts index 952606e607ed..fbd60065542d 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts @@ -43,6 +43,10 @@ stdout-path = &serial2; }; + battery: battery { + compatible = "samsung,eb425161lu"; + }; + /* TI TXS0206 level translator for 2.9 V */ sd_level_translator: regulator-gpio { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts index fabc390ccb0c..47bbf5ab267f 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts @@ -20,6 +20,10 @@ stdout-path = &serial2; }; + battery: battery { + compatible = "samsung,eb585157lu"; + }; + /* TI TXS0206 level translator for 2.9 V */ sd_level_translator: regulator-gpio { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts index ee6379ab688c..fc4c5166d85b 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts @@ -25,6 +25,10 @@ stdout-path = &serial2; }; + battery: battery { + compatible = "samsung,eb-l1m7flu"; + }; + i2c-gpio-0 { compatible = "i2c-gpio"; sda-gpios = <&gpio2 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts index f14cf316a70a..5ddcbc1a855d 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts @@ -20,6 +20,10 @@ stdout-path = &serial2; }; + battery: battery { + compatible = "samsung,eb535151vu"; + }; + /* External LDO for eMMC LDO VMEM_3V3 controlled by GPIO6 */ ldo_3v3_reg: regulator-gpio-ldo-3v3 { compatible = "regulator-fixed"; @@ -266,6 +270,9 @@ pinctrl-names = "default"; pinctrl-0 = <&panel_default_mode>; spi-3wire; + /* TYPE 3: inverse clock polarity and phase */ + spi-cpha; + spi-cpol; port { panel_in: endpoint { diff --git a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts index 3b825666d302..9ec3f85b1a18 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts @@ -24,6 +24,10 @@ stdout-path = &serial2; }; + battery: battery { + compatible = "samsung,eb425161la"; + }; + /* TI TXS0206 level translator for 2.9 V */ sd_level_translator: regulator-gpio { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts index 264f3e9b5fce..580ca497f312 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts @@ -20,6 +20,10 @@ stdout-path = &serial2; }; + battery: battery { + compatible = "samsung,eb485159lu"; + }; + /* TI TXS0206 level translator for 2.9 V */ sd_level_translator: regulator-gpio { compatible = "regulator-fixed"; @@ -222,7 +226,9 @@ }; }; - // eMMC + /* + * eMMC seems to be mostly Samsung KLM4G1YE4C "4YMD1R" + */ mmc@80005000 { arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; @@ -232,6 +238,8 @@ mmc-ddr-1_8v; no-sdio; no-sd; + /* From datasheet page 26 figure 9: 300 ms set-up time for 4GB */ + post-power-on-delay-ms = <300>; vmmc-supply = <&ldo_3v3_reg>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&mc2_a_1_default>; @@ -292,10 +300,10 @@ }; ab8500_ldo_aux2 { - /* Supplies the Cypress TMA140 touchscreen only with 3.3V */ + /* Supplies the Cypress TMA140 touchscreen only with 3.0V */ regulator-name = "AUX2"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; }; ab8500_ldo_aux3 { @@ -314,9 +322,9 @@ ab8500_ldo_aux5 { regulator-name = "AUX5"; + /* Intended for 1V8 for touchscreen but actually left unused */ regulator-min-microvolt = <1050000>; regulator-max-microvolt = <2790000>; - regulator-always-on; }; ab8500_ldo_aux6 { @@ -444,31 +452,21 @@ }; &pinctrl { - /* - * This extends the MC0 default config to include DAT32DIR - * which is used by this machine. If we don't do this the - * SD card does not work. - */ sdi0 { mc0_a_1_default { - default_mux { - function = "mc0"; - /* This machine uses the DAT31 pin */ - groups = "mc0_a_1", "mc0dat31dir_a_1"; - }; - default_cfg5 { - pins = "GPIO21_AB3"; /* DAT31DIR */ - ste,config = <&out_hi>; + default_cfg1 { + /* GPIO18, 19 & 20 unused so pull down */ + ste,config = <&gpio_in_pd>; }; }; }; - /* The unused FBCLK needs to be pulled down on this machine */ + /* This is a reset line for the eMMC */ sdi2 { mc2_a_1_default { default_cfg2 { pins = "GPIO130_C8"; /* FBCLK */ - ste,config = <&in_pd>; + ste,config = <&gpio_in_pd>; }; }; }; diff --git a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi new file mode 100644 index 000000000000..069f95f2b628 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2021 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> + */ +#include <dt-bindings/pinctrl/stm32-pinfunc.h> + +&pinctrl { + sdmmc1_b4_pins_a: sdmmc1-b4-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ + <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + pins3 { + pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-disable; + }; + }; + + uart4_pins_a: uart4-0 { + pins1 { + pinmux = <STM32_PINMUX('D', 6, AF8)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('D', 8, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi new file mode 100644 index 000000000000..86126dc0d898 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp131.dtsi @@ -0,0 +1,283 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2021 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>; + interrupt-parent = <&intc>; + }; + + clocks { + clk_axi: clk-axi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <266500000>; + }; + + clk_hse: clk-hse { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + clk_hsi: clk-hsi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <64000000>; + }; + + clk_lsi: clk-lsi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32000>; + }; + + clk_pclk3: clk-pclk3 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <104438965>; + }; + + clk_pclk4: clk-pclk4 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <133250000>; + }; + + clk_pll4_p: clk-pll4_p { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + + clk_pll4_r: clk-pll4_r { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <99000000>; + }; + }; + + intc: interrupt-controller@a0021000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0xa0021000 0x1000>, + <0xa0022000 0x2000>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-parent = <&intc>; + always-on; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + ranges; + + uart4: serial@40010000 { + compatible = "st,stm32h7-uart"; + reg = <0x40010000 0x400>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_hsi>; + status = "disabled"; + }; + + syscfg: syscon@50020000 { + compatible = "st,stm32mp157-syscfg", "syscon"; + reg = <0x50020000 0x400>; + clocks = <&clk_pclk3>; + }; + + sdmmc1: mmc@58005000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00253180>; + reg = <0x58005000 0x1000>, <0x58006000 0x1000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&clk_pll4_p>; + clock-names = "apb_pclk"; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <120000000>; + status = "disabled"; + }; + + iwdg2: watchdog@5a002000 { + compatible = "st,stm32mp1-iwdg"; + reg = <0x5a002000 0x400>; + clocks = <&clk_pclk4>, <&clk_lsi>; + clock-names = "pclk", "lsi"; + status = "disabled"; + }; + + bsec: efuse@5c005000 { + compatible = "st,stm32mp15-bsec"; + reg = <0x5c005000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + + part_number_otp: part_number_otp@4 { + reg = <0x4 0x2>; + }; + ts_cal1: calib@5c { + reg = <0x5c 0x2>; + }; + ts_cal2: calib@5e { + reg = <0x5e 0x2>; + }; + }; + + /* + * Break node order to solve dependency probe issue between + * pinctrl and exti. + */ + pinctrl: pin-controller@50002000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32mp135-pinctrl"; + ranges = <0 0x50002000 0x8400>; + pins-are-numbered; + + gpioa: gpio@50002000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOA"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOB"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOC"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x3000 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOD"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x4000 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOE"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOF"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@50008000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x6000 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOG"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@50009000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x7000 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOH"; + ngpios = <15>; + gpio-ranges = <&pinctrl 0 112 15>; + }; + + gpioi: gpio@5000a000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x8000 0x400>; + clocks = <&clk_pclk4>; + st,bank-name = "GPIOI"; + ngpios = <8>; + gpio-ranges = <&pinctrl 0 128 8>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp133.dtsi b/arch/arm/boot/dts/stm32mp133.dtsi new file mode 100644 index 000000000000..0fb1386257cf --- /dev/null +++ b/arch/arm/boot/dts/stm32mp133.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2021 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ + +#include "stm32mp131.dtsi" + +/ { + soc { + m_can1: can@4400e000 { + compatible = "bosch,m_can"; + reg = <0x4400e000 0x400>, <0x44011000 0x1400>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&clk_hse>, <&clk_pll4_r>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; + status = "disabled"; + }; + + m_can2: can@4400f000 { + compatible = "bosch,m_can"; + reg = <0x4400f000 0x400>, <0x44011000 0x2800>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&clk_hse>, <&clk_pll4_r>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp135.dtsi b/arch/arm/boot/dts/stm32mp135.dtsi new file mode 100644 index 000000000000..abf2acd37b4e --- /dev/null +++ b/arch/arm/boot/dts/stm32mp135.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2021 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ + +#include "stm32mp133.dtsi" + +/ { + soc { + }; +}; diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts new file mode 100644 index 000000000000..7e96d9e36217 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp135f-dk.dts @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2021 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp135.dtsi" +#include "stm32mp13xf.dtsi" +#include "stm32mp13-pinctrl.dtsi" + +/ { + model = "STMicroelectronics STM32MP135F-DK Discovery Board"; + compatible = "st,stm32mp135f-dk", "st,stm32mp135"; + + aliases { + serial0 = &uart4; + }; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x20000000>; + }; + + vdd_sd: vdd-sd { + compatible = "regulator-fixed"; + regulator-name = "vdd_sd"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + }; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + broken-cd; + disable-wp; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&vdd_sd>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp13xc.dtsi b/arch/arm/boot/dts/stm32mp13xc.dtsi new file mode 100644 index 000000000000..fa6889e30591 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp13xc.dtsi @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2021 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ + +/ { + soc { + cryp: crypto@54002000 { + compatible = "st,stm32mp1-cryp"; + reg = <0x54002000 0x400>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_axi>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp13xf.dtsi b/arch/arm/boot/dts/stm32mp13xf.dtsi new file mode 100644 index 000000000000..fa6889e30591 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp13xf.dtsi @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2021 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ + +/ { + soc { + cryp: crypto@54002000 { + compatible = "st,stm32mp1-cryp"; + reg = <0x54002000 0x400>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_axi>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index 5b60ecbd718f..2ebafe27a865 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -1179,7 +1179,7 @@ }; }; - sai2a_pins_c: sai2a-4 { + sai2a_pins_c: sai2a-2 { pins { pinmux = <STM32_PINMUX('D', 13, AF10)>, /* SAI2_SCK_A */ <STM32_PINMUX('D', 11, AF10)>, /* SAI2_SD_A */ @@ -1190,7 +1190,7 @@ }; }; - sai2a_sleep_pins_c: sai2a-5 { + sai2a_sleep_pins_c: sai2a-2 { pins { pinmux = <STM32_PINMUX('D', 13, ANALOG)>, /* SAI2_SCK_A */ <STM32_PINMUX('D', 11, ANALOG)>, /* SAI2_SD_A */ @@ -1235,14 +1235,14 @@ }; }; - sai2b_pins_c: sai2a-4 { + sai2b_pins_c: sai2b-2 { pins1 { pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */ bias-disable; }; }; - sai2b_sleep_pins_c: sai2a-sleep-5 { + sai2b_sleep_pins_c: sai2b-sleep-2 { pins { pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */ }; diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index bd289bf5d269..f693a7d24247 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -824,7 +824,7 @@ #sound-dai-cells = <0>; compatible = "st,stm32-sai-sub-a"; - reg = <0x4 0x1c>; + reg = <0x4 0x20>; clocks = <&rcc SAI1_K>; clock-names = "sai_ck"; dmas = <&dmamux1 87 0x400 0x01>; @@ -834,7 +834,7 @@ sai1b: audio-controller@4400a024 { #sound-dai-cells = <0>; compatible = "st,stm32-sai-sub-b"; - reg = <0x24 0x1c>; + reg = <0x24 0x20>; clocks = <&rcc SAI1_K>; clock-names = "sai_ck"; dmas = <&dmamux1 88 0x400 0x01>; @@ -855,7 +855,7 @@ sai2a: audio-controller@4400b004 { #sound-dai-cells = <0>; compatible = "st,stm32-sai-sub-a"; - reg = <0x4 0x1c>; + reg = <0x4 0x20>; clocks = <&rcc SAI2_K>; clock-names = "sai_ck"; dmas = <&dmamux1 89 0x400 0x01>; @@ -865,7 +865,7 @@ sai2b: audio-controller@4400b024 { #sound-dai-cells = <0>; compatible = "st,stm32-sai-sub-b"; - reg = <0x24 0x1c>; + reg = <0x24 0x20>; clocks = <&rcc SAI2_K>; clock-names = "sai_ck"; dmas = <&dmamux1 90 0x400 0x01>; @@ -886,7 +886,7 @@ sai3a: audio-controller@4400c004 { #sound-dai-cells = <0>; compatible = "st,stm32-sai-sub-a"; - reg = <0x04 0x1c>; + reg = <0x04 0x20>; clocks = <&rcc SAI3_K>; clock-names = "sai_ck"; dmas = <&dmamux1 113 0x400 0x01>; @@ -896,7 +896,7 @@ sai3b: audio-controller@4400c024 { #sound-dai-cells = <0>; compatible = "st,stm32-sai-sub-b"; - reg = <0x24 0x1c>; + reg = <0x24 0x20>; clocks = <&rcc SAI3_K>; clock-names = "sai_ck"; dmas = <&dmamux1 114 0x400 0x01>; @@ -1271,7 +1271,7 @@ sai4a: audio-controller@50027004 { #sound-dai-cells = <0>; compatible = "st,stm32-sai-sub-a"; - reg = <0x04 0x1c>; + reg = <0x04 0x20>; clocks = <&rcc SAI4_K>; clock-names = "sai_ck"; dmas = <&dmamux1 99 0x400 0x01>; @@ -1281,7 +1281,7 @@ sai4b: audio-controller@50027024 { #sound-dai-cells = <0>; compatible = "st,stm32-sai-sub-b"; - reg = <0x24 0x1c>; + reg = <0x24 0x20>; clocks = <&rcc SAI4_K>; clock-names = "sai_ck"; dmas = <&dmamux1 100 0x400 0x01>; @@ -1452,7 +1452,7 @@ usbh_ohci: usb@5800c000 { compatible = "generic-ohci"; reg = <0x5800c000 0x1000>; - clocks = <&rcc USBH>; + clocks = <&rcc USBH>, <&usbphyc>; resets = <&rcc USBH_R>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey.dts b/arch/arm/boot/dts/stm32mp157c-odyssey.dts index be1dd5e9e744..554f5d3bcdc3 100644 --- a/arch/arm/boot/dts/stm32mp157c-odyssey.dts +++ b/arch/arm/boot/dts/stm32mp157c-odyssey.dts @@ -22,6 +22,12 @@ }; }; +&dcmi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&dcmi_pins_b>; + pinctrl-1 = <&dcmi_sleep_pins_b>; +}; + ðernet0 { status = "okay"; pinctrl-0 = <ðernet0_rgmii_pins_a>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi index 2b0ac605549d..44ecc4708587 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi @@ -202,7 +202,7 @@ compatible = "jedec,spi-nor"; reg = <0>; spi-rx-bus-width = <4>; - spi-max-frequency = <108000000>; + spi-max-frequency = <50000000>; #address-cells = <1>; #size-cells = <1>; }; diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index 899bfe04aeb9..48beed0f1f30 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -249,7 +249,7 @@ stusb1600@28 { compatible = "st,stusb1600"; reg = <0x28>; - interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&gpioi>; pinctrl-names = "default"; pinctrl-0 = <&stusb1600_pins_a>; diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index ad0e25af45be..83d283cf6633 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -91,12 +91,11 @@ /* * The A10-Lime is known to be unstable when running at 1008 MHz */ - operating-points = < - /* kHz uV */ - 912000 1350000 - 864000 1300000 - 624000 1250000 - >; + operating-points = + /* kHz uV */ + <912000 1350000>, + <864000 1300000>, + <624000 1250000>; }; &de { diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 1c5a666c54b5..51a6464aab9a 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -115,13 +115,12 @@ reg = <0x0>; clocks = <&ccu CLK_CPU>; clock-latency = <244144>; /* 8 32k periods */ - operating-points = < + operating-points = /* kHz uV */ - 1008000 1400000 - 912000 1350000 - 864000 1300000 - 624000 1250000 - >; + <1008000 1400000>, + <912000 1350000>, + <864000 1300000>, + <624000 1250000>; #cooling-cells = <2>; }; }; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index 7075e10911d5..3325ab07094a 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -102,15 +102,14 @@ &cpu0 { clock-latency = <244144>; /* 8 32k periods */ - operating-points = < + operating-points = /* kHz uV */ - 1008000 1400000 - 912000 1350000 - 864000 1300000 - 624000 1200000 - 576000 1200000 - 432000 1200000 - >; + <1008000 1400000>, + <912000 1350000>, + <864000 1300000>, + <624000 1200000>, + <576000 1200000>, + <432000 1200000>; #cooling-cells = <2>; }; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index a31f9072bf79..715d74854449 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -105,13 +105,12 @@ reg = <0>; clocks = <&ccu CLK_CPU>; clock-latency = <244144>; /* 8 32k periods */ - operating-points = < + operating-points = /* kHz uV */ - 1008000 1200000 - 864000 1200000 - 720000 1100000 - 480000 1000000 - >; + <1008000 1200000>, + <864000 1200000>, + <720000 1100000>, + <480000 1000000>; #cooling-cells = <2>; }; @@ -121,13 +120,12 @@ reg = <1>; clocks = <&ccu CLK_CPU>; clock-latency = <244144>; /* 8 32k periods */ - operating-points = < + operating-points = /* kHz uV */ - 1008000 1200000 - 864000 1200000 - 720000 1100000 - 480000 1000000 - >; + <1008000 1200000>, + <864000 1200000>, + <720000 1100000>, + <480000 1000000>; #cooling-cells = <2>; }; @@ -137,13 +135,12 @@ reg = <2>; clocks = <&ccu CLK_CPU>; clock-latency = <244144>; /* 8 32k periods */ - operating-points = < + operating-points = /* kHz uV */ - 1008000 1200000 - 864000 1200000 - 720000 1100000 - 480000 1000000 - >; + <1008000 1200000>, + <864000 1200000>, + <720000 1100000>, + <480000 1000000>; #cooling-cells = <2>; }; @@ -153,13 +150,12 @@ reg = <3>; clocks = <&ccu CLK_CPU>; clock-latency = <244144>; /* 8 32k periods */ - operating-points = < + operating-points = /* kHz uV */ - 1008000 1200000 - 864000 1200000 - 720000 1100000 - 480000 1000000 - >; + <1008000 1200000>, + <864000 1200000>, + <720000 1100000>, + <480000 1000000>; #cooling-cells = <2>; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index 9d792d7a0f92..46ecf9db2324 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -104,16 +104,15 @@ &cpu0 { cpu-supply = <®_dcdc2>; - operating-points = < + operating-points = /* kHz uV */ - 960000 1400000 - 912000 1400000 - 864000 1350000 - 720000 1250000 - 528000 1150000 - 312000 1100000 - 144000 1050000 - >; + <960000 1400000>, + <912000 1400000>, + <864000 1350000>, + <720000 1250000>, + <528000 1150000>, + <312000 1100000>, + <144000 1050000>; }; &de { diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 5a40e0280665..5574299685ab 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -106,16 +106,15 @@ reg = <0>; clocks = <&ccu CLK_CPU>; clock-latency = <244144>; /* 8 32k periods */ - operating-points = < + operating-points = /* kHz uV */ - 960000 1400000 - 912000 1400000 - 864000 1300000 - 720000 1200000 - 528000 1100000 - 312000 1000000 - 144000 1000000 - >; + <960000 1400000>, + <912000 1400000>, + <864000 1300000>, + <720000 1200000>, + <528000 1100000>, + <312000 1000000>, + <144000 1000000>; #cooling-cells = <2>; }; @@ -125,16 +124,15 @@ reg = <1>; clocks = <&ccu CLK_CPU>; clock-latency = <244144>; /* 8 32k periods */ - operating-points = < + operating-points = /* kHz uV */ - 960000 1400000 - 912000 1400000 - 864000 1300000 - 720000 1200000 - 528000 1100000 - 312000 1000000 - 144000 1000000 - >; + <960000 1400000>, + <912000 1400000>, + <864000 1300000>, + <720000 1200000>, + <528000 1100000>, + <312000 1000000>, + <144000 1000000>; #cooling-cells = <2>; }; }; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index 2beddbb3c518..b3d1bdfb5118 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -46,7 +46,7 @@ #include <dt-bindings/thermal/thermal.h> / { - cpu0_opp_table: opp_table0 { + cpu0_opp_table: opp-table-cpu { compatible = "operating-points-v2"; opp-shared; @@ -164,7 +164,7 @@ io-channels = <&ths>; }; - mali_opp_table: gpu-opp-table { + mali_opp_table: opp-table-gpu { compatible = "operating-points-v2"; opp-144000000 { diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts index 7fe2a584ddf9..a7d4ca308990 100644 --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts @@ -169,7 +169,7 @@ status = "okay"; touchscreen@38 { - compatible = "edt,edt-ft5x06"; + compatible = "edt,edt-ft5206"; reg = <0x38>; interrupt-parent = <&r_pio>; interrupts = <0 7 IRQ_TYPE_EDGE_FALLING>; /* PL7 */ diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index ac97eac91349..82fdb04122ca 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -200,7 +200,7 @@ status = "disabled"; }; - cpu0_opp_table: opp_table0 { + cpu0_opp_table: opp-table-cluster0 { compatible = "operating-points-v2"; opp-shared; @@ -253,7 +253,7 @@ }; }; - cpu1_opp_table: opp_table1 { + cpu1_opp_table: opp-table-cluster1 { compatible = "operating-points-v2"; opp-shared; diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 4e89701df91f..ae4f933abb89 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -44,7 +44,7 @@ #include <dt-bindings/thermal/thermal.h> / { - cpu0_opp_table: opp_table0 { + cpu0_opp_table: opp-table-cpu { compatible = "operating-points-v2"; opp-shared; @@ -112,7 +112,7 @@ }; }; - gpu_opp_table: gpu-opp-table { + gpu_opp_table: opp-table-gpu { compatible = "operating-points-v2"; opp-120000000 { diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index 291f4784e86c..1d87fc0c24ee 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -736,6 +736,45 @@ status = "disabled"; }; + i2s0: i2s@1c22000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-r40-i2s", + "allwinner,sun8i-h3-i2s"; + reg = <0x01c22000 0x400>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>; + clock-names = "apb", "mod"; + resets = <&ccu RST_BUS_I2S0>; + dmas = <&dma 3>, <&dma 3>; + dma-names = "rx", "tx"; + }; + + i2s1: i2s@1c22400 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-r40-i2s", + "allwinner,sun8i-h3-i2s"; + reg = <0x01c22400 0x400>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>; + clock-names = "apb", "mod"; + resets = <&ccu RST_BUS_I2S1>; + dmas = <&dma 4>, <&dma 4>; + dma-names = "rx", "tx"; + }; + + i2s2: i2s@1c22800 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-r40-i2s", + "allwinner,sun8i-h3-i2s"; + reg = <0x01c22800 0x400>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>; + clock-names = "apb", "mod"; + resets = <&ccu RST_BUS_I2S2>; + dmas = <&dma 6>, <&dma 6>; + dma-names = "rx", "tx"; + }; + ths: thermal-sensor@1c24c00 { compatible = "allwinner,sun8i-r40-ths"; reg = <0x01c24c00 0x100>; diff --git a/arch/arm/boot/dts/sun8i-v3-sl631.dtsi b/arch/arm/boot/dts/sun8i-v3-sl631.dtsi index e0d2a31efc7f..6f93f8c49f84 100644 --- a/arch/arm/boot/dts/sun8i-v3-sl631.dtsi +++ b/arch/arm/boot/dts/sun8i-v3-sl631.dtsi @@ -115,7 +115,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { reg = <0>; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts index 1fe251ea94bc..c8ca8cb7f5c9 100644 --- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts +++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts @@ -87,7 +87,7 @@ }; vga-dac { - compatible = "corpro,gm7123", "adi,adv7123", "dumb-vga-dac"; + compatible = "corpro,gm7123", "adi,adv7123"; vdd-supply = <®_dcdc1>; ports { diff --git a/arch/arm/boot/dts/sunxi-libretech-all-h3-it.dtsi b/arch/arm/boot/dts/sunxi-libretech-all-h3-it.dtsi index 204fba3614f9..50d328c2a84d 100644 --- a/arch/arm/boot/dts/sunxi-libretech-all-h3-it.dtsi +++ b/arch/arm/boot/dts/sunxi-libretech-all-h3-it.dtsi @@ -156,7 +156,7 @@ &spi0 { status = "okay"; - spiflash@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index fb99b3e971c3..546272e396b4 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -691,7 +691,7 @@ }; usb@7d000000 { - compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci", "usb-ehci"; + compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci"; reg = <0x7d000000 0x4000>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; @@ -706,6 +706,7 @@ compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy"; reg = <0x7d000000 0x4000>, <0x7d000000 0x4000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; clocks = <&tegra_car TEGRA114_CLK_USBD>, <&tegra_car TEGRA114_CLK_PLL_U>, @@ -725,11 +726,12 @@ nvidia,hsdiscon-level = <5>; nvidia,xcvr-hsslew = <12>; nvidia,has-utmi-pad-registers; + nvidia,pmc = <&tegra_pmc 0>; status = "disabled"; }; usb@7d008000 { - compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci", "usb-ehci"; + compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci"; reg = <0x7d008000 0x4000>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; @@ -744,6 +746,7 @@ compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy"; reg = <0x7d008000 0x4000>, <0x7d000000 0x4000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; clocks = <&tegra_car TEGRA114_CLK_USB3>, <&tegra_car TEGRA114_CLK_PLL_U>, @@ -762,6 +765,7 @@ nvidia,hssquelch-level = <2>; nvidia,hsdiscon-level = <5>; nvidia,xcvr-hsslew = <12>; + nvidia,pmc = <&tegra_pmc 2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 8b38f123f554..63a64171b422 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -1079,7 +1079,7 @@ }; usb@7d000000 { - compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci"; + compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci"; reg = <0x0 0x7d000000 0x0 0x4000>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; @@ -1094,6 +1094,7 @@ compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy"; reg = <0x0 0x7d000000 0x0 0x4000>, <0x0 0x7d000000 0x0 0x4000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; clocks = <&tegra_car TEGRA124_CLK_USBD>, <&tegra_car TEGRA124_CLK_PLL_U>, @@ -1113,11 +1114,12 @@ nvidia,hsdiscon-level = <5>; nvidia,xcvr-hsslew = <12>; nvidia,has-utmi-pad-registers; + nvidia,pmc = <&tegra_pmc 0>; status = "disabled"; }; usb@7d004000 { - compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci"; + compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci"; reg = <0x0 0x7d004000 0x0 0x4000>; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; @@ -1132,6 +1134,7 @@ compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy"; reg = <0x0 0x7d004000 0x0 0x4000>, <0x0 0x7d000000 0x0 0x4000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; clocks = <&tegra_car TEGRA124_CLK_USB2>, <&tegra_car TEGRA124_CLK_PLL_U>, @@ -1150,11 +1153,12 @@ nvidia,hssquelch-level = <2>; nvidia,hsdiscon-level = <5>; nvidia,xcvr-hsslew = <12>; + nvidia,pmc = <&tegra_pmc 1>; status = "disabled"; }; usb@7d008000 { - compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci"; + compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci"; reg = <0x0 0x7d008000 0x0 0x4000>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; @@ -1169,6 +1173,7 @@ compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy"; reg = <0x0 0x7d008000 0x0 0x4000>, <0x0 0x7d000000 0x0 0x4000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; clocks = <&tegra_car TEGRA124_CLK_USB3>, <&tegra_car TEGRA124_CLK_PLL_U>, @@ -1187,6 +1192,7 @@ nvidia,hssquelch-level = <2>; nvidia,hsdiscon-level = <5>; nvidia,xcvr-hsslew = <12>; + nvidia,pmc = <&tegra_pmc 2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts index 2280d75b66ab..23d3f8daab23 100644 --- a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts +++ b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts @@ -393,6 +393,10 @@ bluetooth { compatible = "brcm,bcm4329-bt"; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>; + interrupt-names = "host-wakeup"; + /* PLLP 216MHz / 16 / 4 */ max-speed = <3375000>; @@ -403,7 +407,6 @@ vddio-supply = <&vdd_1v8_sys>; device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpio TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>; shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>; }; }; @@ -543,7 +546,7 @@ status = "okay"; magnetometer@c { - compatible = "ak,ak8975"; + compatible = "asahi-kasei,ak8975"; reg = <0x0c>; interrupt-parent = <&gpio>; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index acc816bfd233..5b38b0606f99 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -573,8 +573,6 @@ brightness-levels = <0 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 255>; default-brightness-level = <10>; - - backlight-boot-off; }; clk32k_in: clock@0 { diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 6ce498178105..9508248fd166 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -744,11 +744,10 @@ }; usb@c5000000 { - compatible = "nvidia,tegra20-ehci", "usb-ehci"; + compatible = "nvidia,tegra20-ehci"; reg = <0xc5000000 0x4000>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; - nvidia,has-legacy-mode; clocks = <&tegra_car TEGRA20_CLK_USBD>; resets = <&tegra_car 22>; reset-names = "usb"; @@ -761,6 +760,7 @@ compatible = "nvidia,tegra20-usb-phy"; reg = <0xc5000000 0x4000>, <0xc5000000 0x4000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; clocks = <&tegra_car TEGRA20_CLK_USBD>, <&tegra_car TEGRA20_CLK_PLL_U>, @@ -779,11 +779,12 @@ nvidia,xcvr-lsfslew = <1>; nvidia,xcvr-lsrslew = <1>; nvidia,has-utmi-pad-registers; + nvidia,pmc = <&tegra_pmc 0>; status = "disabled"; }; usb@c5004000 { - compatible = "nvidia,tegra20-ehci", "usb-ehci"; + compatible = "nvidia,tegra20-ehci"; reg = <0xc5004000 0x4000>; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; phy_type = "ulpi"; @@ -797,6 +798,7 @@ phy2: usb-phy@c5004000 { compatible = "nvidia,tegra20-usb-phy"; reg = <0xc5004000 0x4000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; phy_type = "ulpi"; clocks = <&tegra_car TEGRA20_CLK_USB2>, <&tegra_car TEGRA20_CLK_PLL_U>, @@ -805,11 +807,12 @@ resets = <&tegra_car 58>, <&tegra_car 22>; reset-names = "usb", "utmi-pads"; #phy-cells = <0>; + nvidia,pmc = <&tegra_pmc 1>; status = "disabled"; }; usb@c5008000 { - compatible = "nvidia,tegra20-ehci", "usb-ehci"; + compatible = "nvidia,tegra20-ehci"; reg = <0xc5008000 0x4000>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; @@ -824,6 +827,7 @@ compatible = "nvidia,tegra20-usb-phy"; reg = <0xc5008000 0x4000>, <0xc5000000 0x4000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; clocks = <&tegra_car TEGRA20_CLK_USB3>, <&tegra_car TEGRA20_CLK_PLL_U>, @@ -840,6 +844,7 @@ nvidia,xcvr-setup = <9>; nvidia,xcvr-lsfslew = <2>; nvidia,xcvr-lsrslew = <2>; + nvidia,pmc = <&tegra_pmc 2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi index 9732cd6f20b7..07d4ea130964 100644 --- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi +++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi @@ -819,6 +819,10 @@ bluetooth { compatible = "brcm,bcm4330-bt"; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>; + interrupt-names = "host-wakeup"; + max-speed = <4000000>; clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>; @@ -828,7 +832,6 @@ vddio-supply = <&vdd_1v8>; device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpio TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>; shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>; }; }; @@ -941,9 +944,29 @@ interrupts = <TEGRA_GPIO(V, 1) IRQ_TYPE_EDGE_BOTH>; summit,enable-charge-control = <SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW>; + summit,inok-polarity = <SMB3XX_SYSOK_INOK_ACTIVE_LOW>; summit,enable-usb-charging; monitored-battery = <&battery_cell>; + + usb_vbus: usb-vbus { + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-min-microamp = <750000>; + regulator-max-microamp = <750000>; + + /* + * SMB347 INOK input pin is connected to PMIC's + * ACOK output, which is fixed to ACTIVE_LOW as + * long as battery voltage is in a good range. + * + * Active INOK disables SMB347 output, so polarity + * needs to be toggled when we want to get the + * output. + */ + summit,needs-inok-toggle; + }; }; }; @@ -1016,12 +1039,13 @@ usb@7d000000 { compatible = "nvidia,tegra30-udc"; status = "okay"; - dr_mode = "peripheral"; + dr_mode = "otg"; + vbus-supply = <&usb_vbus>; }; usb-phy@7d000000 { status = "okay"; - dr_mode = "peripheral"; + dr_mode = "otg"; nvidia,hssync-start-delay = <0>; nvidia,xcvr-lsfslew = <2>; nvidia,xcvr-lsrslew = <2>; diff --git a/arch/arm/boot/dts/tegra30-ouya.dts b/arch/arm/boot/dts/tegra30-ouya.dts index 90db5ff72537..4259871b76c9 100644 --- a/arch/arm/boot/dts/tegra30-ouya.dts +++ b/arch/arm/boot/dts/tegra30-ouya.dts @@ -93,6 +93,10 @@ bluetooth { compatible = "brcm,bcm4330-bt"; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>; + interrupt-names = "host-wakeup"; + max-speed = <4000000>; clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>; @@ -103,7 +107,6 @@ shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>; device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpio TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index eaf4951d9ff8..ae3df73c20a7 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -958,7 +958,7 @@ }; usb@7d000000 { - compatible = "nvidia,tegra30-ehci", "usb-ehci"; + compatible = "nvidia,tegra30-ehci"; reg = <0x7d000000 0x4000>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; @@ -974,6 +974,7 @@ compatible = "nvidia,tegra30-usb-phy"; reg = <0x7d000000 0x4000>, <0x7d000000 0x4000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; clocks = <&tegra_car TEGRA30_CLK_USBD>, <&tegra_car TEGRA30_CLK_PLL_U>, @@ -994,11 +995,12 @@ nvidia,hssquelch-level = <2>; nvidia,hsdiscon-level = <5>; nvidia,has-utmi-pad-registers; + nvidia,pmc = <&tegra_pmc 0>; status = "disabled"; }; usb@7d004000 { - compatible = "nvidia,tegra30-ehci", "usb-ehci"; + compatible = "nvidia,tegra30-ehci"; reg = <0x7d004000 0x4000>; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; @@ -1013,6 +1015,7 @@ compatible = "nvidia,tegra30-usb-phy"; reg = <0x7d004000 0x4000>, <0x7d000000 0x4000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; clocks = <&tegra_car TEGRA30_CLK_USB2>, <&tegra_car TEGRA30_CLK_PLL_U>, @@ -1032,11 +1035,12 @@ nvidia,xcvr-hsslew = <32>; nvidia,hssquelch-level = <2>; nvidia,hsdiscon-level = <5>; + nvidia,pmc = <&tegra_pmc 2>; status = "disabled"; }; usb@7d008000 { - compatible = "nvidia,tegra30-ehci", "usb-ehci"; + compatible = "nvidia,tegra30-ehci"; reg = <0x7d008000 0x4000>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; @@ -1051,6 +1055,7 @@ compatible = "nvidia,tegra30-usb-phy"; reg = <0x7d008000 0x4000>, <0x7d000000 0x4000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; clocks = <&tegra_car TEGRA30_CLK_USB3>, <&tegra_car TEGRA30_CLK_PLL_U>, @@ -1070,6 +1075,7 @@ nvidia,xcvr-hsslew = <32>; nvidia,hssquelch-level = <2>; nvidia,hsdiscon-level = <5>; + nvidia,pmc = <&tegra_pmc 1>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/versatile-ab-ib2.dts b/arch/arm/boot/dts/versatile-ab-ib2.dts index c577ff4bb4be..7ebb0dfd0467 100644 --- a/arch/arm/boot/dts/versatile-ab-ib2.dts +++ b/arch/arm/boot/dts/versatile-ab-ib2.dts @@ -13,9 +13,13 @@ syscon@27000000 { compatible = "arm,versatile-ib2-syscon", "syscon", "simple-mfd"; reg = <0x27000000 0x4>; + ranges = <0x0 0x27000000 0x4>; + #address-cells = <1>; + #size-cells = <1>; - led@00.4 { + led@0,4 { compatible = "register-bit-led"; + reg = <0x00 0x04>; offset = <0x00>; mask = <0x10>; label = "versatile-ib2:0"; diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts index 151c0220047d..79f7cc241282 100644 --- a/arch/arm/boot/dts/versatile-ab.dts +++ b/arch/arm/boot/dts/versatile-ab.dts @@ -70,61 +70,72 @@ core-module@10000000 { compatible = "arm,core-module-versatile", "syscon", "simple-mfd"; reg = <0x10000000 0x200>; + ranges = <0x0 0x10000000 0x200>; + #address-cells = <1>; + #size-cells = <1>; - led@08.0 { + led@8,0 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x01>; label = "versatile:0"; linux,default-trigger = "heartbeat"; default-state = "on"; }; - led@08.1 { + led@8,1 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x02>; label = "versatile:1"; linux,default-trigger = "mmc0"; default-state = "off"; }; - led@08.2 { + led@8,2 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x04>; label = "versatile:2"; linux,default-trigger = "cpu0"; default-state = "off"; }; - led@08.3 { + led@8,3 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x08>; label = "versatile:3"; default-state = "off"; }; - led@08.4 { + led@8,4 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x10>; label = "versatile:4"; default-state = "off"; }; - led@08.5 { + led@8,5 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x20>; label = "versatile:5"; default-state = "off"; }; - led@08.6 { + led@8,6 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x40>; label = "versatile:6"; default-state = "off"; }; - led@08.7 { + led@8,7 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x80>; label = "versatile:7"; diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig index 1772eccb5caf..466acc4a5e0c 100644 --- a/arch/arm/mach-qcom/Kconfig +++ b/arch/arm/mach-qcom/Kconfig @@ -21,6 +21,16 @@ config ARCH_MSM8X60 bool "Enable support for MSM8X60" select CLKSRC_QCOM +config ARCH_MSM8916 + bool "Enable support for MSM8916" + select HAVE_ARM_ARCH_TIMER + help + Enable support for the Qualcomm Snapdragon 410 (MSM8916/APQ8016). + + Note that ARM64 is the main supported architecture for MSM8916. + The ARM32 option is intended for a few devices with signed firmware + that does not allow booting ARM64 kernels. + config ARCH_MSM8960 bool "Enable support for MSM8960" select CLKSRC_QCOM diff --git a/arch/arm64/boot/dts/allwinner/axp803.dtsi b/arch/arm64/boot/dts/allwinner/axp803.dtsi index 10e9186a76bf..578ef368e2b4 100644 --- a/arch/arm64/boot/dts/allwinner/axp803.dtsi +++ b/arch/arm64/boot/dts/allwinner/axp803.dtsi @@ -10,7 +10,7 @@ interrupt-controller; #interrupt-cells = <1>; - ac_power_supply: ac-power-supply { + ac_power_supply: ac-power { compatible = "x-powers,axp803-ac-power-supply", "x-powers,axp813-ac-power-supply"; status = "disabled"; @@ -26,18 +26,18 @@ gpio-controller; #gpio-cells = <2>; - gpio0_ldo: gpio0-ldo { + gpio0_ldo: gpio0-ldo-pin { pins = "GPIO0"; function = "ldo"; }; - gpio1_ldo: gpio1-ldo { + gpio1_ldo: gpio1-ldo-pin { pins = "GPIO1"; function = "ldo"; }; }; - battery_power_supply: battery-power-supply { + battery_power_supply: battery-power { compatible = "x-powers,axp803-battery-power-supply", "x-powers,axp813-battery-power-supply"; status = "disabled"; @@ -147,7 +147,7 @@ }; }; - usb_power_supply: usb-power-supply { + usb_power_supply: usb-power { compatible = "x-powers,axp803-usb-power-supply", "x-powers,axp813-usb-power-supply"; status = "disabled"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi index cc321c04f121..f6d7d7f7fdab 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi @@ -343,19 +343,19 @@ }; thermal-zones { - cpu-thermal-zone { + cpu-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&ths 0>; }; - ddr-thermal-zone { + ddr-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&ths 2>; }; - gpu-thermal-zone { + gpu-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&ths 1>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi index 578c37490d90..e39db51eb448 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi @@ -4,7 +4,7 @@ */ / { - cpu0_opp_table: opp_table0 { + cpu0_opp_table: opp-table-cpu { compatible = "operating-points-v2"; opp-shared; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts index 097a5511523a..c519d9fa6967 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts @@ -343,7 +343,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { compatible = "mxicy,mx25l1606e", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <80000000>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts index 7ef96f9ff7ae..adb0b28b06d8 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts @@ -35,6 +35,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "c"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + i2c-csi { compatible = "i2c-gpio"; sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>; /* PE13 */ @@ -77,7 +88,7 @@ sound-name-prefix = "Speaker Amp"; }; - vdd_bl: regulator@0 { + vdd_bl: regulator { compatible = "regulator-fixed"; regulator-name = "bl-3v3"; regulator-min-microvolt = <3300000>; @@ -410,6 +421,21 @@ regulator-name = "vcc-rtc"; }; +&simplefb_hdmi { + vcc-hdmi-supply = <®_dldo1>; +}; + +&hdmi { + hvcc-supply = <®_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &sound { status = "okay"; simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts index 45e1abdf70a0..aef571acd67f 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts @@ -139,6 +139,8 @@ #size-cells = <0>; port@0 { + reg = <0>; + anx6345_in: endpoint { remote-endpoint = <&tcon0_out_anx6345>; }; @@ -206,7 +208,6 @@ reg = <0x3a3>; interrupt-parent = <&r_intc>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; - wakeup-source; }; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 6ddb717f2f98..5ba379078500 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -102,6 +102,22 @@ status = "disabled"; }; + gpu_opp_table: opp-table-gpu { + compatible = "operating-points-v2"; + + opp-120000000 { + opp-hz = /bits/ 64 <120000000>; + }; + + opp-312000000 { + opp-hz = /bits/ 64 <312000000>; + }; + + opp-432000000 { + opp-hz = /bits/ 64 <432000000>; + }; + }; + osc24M: osc24M_clk { #clock-cells = <0>; compatible = "fixed-clock"; @@ -1103,6 +1119,7 @@ clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>; clock-names = "bus", "core"; resets = <&ccu RST_BUS_GPU>; + operating-points-v2 = <&gpu_opp_table>; }; gic: interrupt-controller@1c81000 { diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi index b2657201957e..1afad8b437d7 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi @@ -2,7 +2,7 @@ // Copyright (C) 2020 Chen-Yu Tsai <wens@csie.org> / { - cpu_opp_table: cpu-opp-table { + cpu_opp_table: opp-table-cpu { compatible = "operating-points-v2"; opp-shared; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts index 55bcdf8d1a07..55b369534a08 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts @@ -142,9 +142,16 @@ status = "okay"; eeprom@51 { - compatible = "microchip,24c02"; + compatible = "microchip,24c02", "atmel,24c02"; reg = <0x51>; pagesize = <16>; + read-only; + #address-cells = <1>; + #size-cells = <1>; + + eth_mac1: mac-address@fa { + reg = <0xfa 0x06>; + }; }; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi index 578a63dedf46..9988e87ea7b3 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi @@ -217,7 +217,7 @@ }; }; - gpu_thermal { + gpu-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&ths 1>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi index 8c6e8536b69f..0baf0f8e4d27 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi @@ -3,7 +3,7 @@ // Copyright (C) 2020 Clément Péron <peron.clem@gmail.com> / { - cpu_opp_table: cpu-opp-table { + cpu_opp_table: opp-table-cpu { compatible = "allwinner,sun50i-h6-operating-points"; nvmem-cells = <&cpu_speed_grade>; opp-shared; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index 30d396e8c762..46ed529a4dc2 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -119,10 +119,10 @@ display_clocks: clock@0 { compatible = "allwinner,sun50i-h6-de3-clk"; reg = <0x0 0x10000>; - clocks = <&ccu CLK_DE>, - <&ccu CLK_BUS_DE>; - clock-names = "mod", - "bus"; + clocks = <&ccu CLK_BUS_DE>, + <&ccu CLK_DE>; + clock-names = "bus", + "mod"; resets = <&ccu RST_BUS_DE>; #clock-cells = <1>; #reset-cells = <1>; diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index faa0a79a34f5..5148cd9e5146 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -1,5 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12a-radxa-zero.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb @@ -38,6 +40,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-jethome-jethub-j80.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts new file mode 100644 index 000000000000..52ebe371df26 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts @@ -0,0 +1,362 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Vyacheslav Bocharov <adeep@lexina.in> + * Copyright (c) 2020 JetHome + * Author: Aleksandr Kazantsev <ak@tvip.ru> + * Author: Alexey Shevelkin <ash@tvip.ru> + * Author: Vyacheslav Bocharov <adeep@lexina.in> + */ + +/dts-v1/; + +#include "meson-axg.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + compatible = "jethome,jethub-j100", "amlogic,a113d", "amlogic,meson-axg"; + model = "JetHome JetHub J100"; + aliases { + serial0 = &uart_AO; /* Console */ + serial1 = &uart_AO_B; /* External UART (Wireless Module) */ + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + /* 1024MB RAM */ + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + reserved-memory { + linux,cma { + size = <0x0 0x400000>; + }; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vcc_5v: regulator-vcc_5v { + compatible = "regulator-fixed"; + regulator-name = "VCC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_5v>; + regulator-always-on; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + usb_pwr: regulator-usb_pwr { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + regulator-always-on; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */ + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&scpi_sensors 0>; + trips { + cpu_passive: cpu-passive { + temperature = <70000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + cpu_hot: cpu-hot { + temperature = <80000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "hot"; + }; + + cpu_critical: cpu-critical { + temperature = <100000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + }; + + cpu_cooling_maps: cooling-maps { + map0 { + trip = <&cpu_passive>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&cpu_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + onewire { + compatible = "w1-gpio"; + gpios = <&gpio GPIOA_14 GPIO_ACTIVE_HIGH>; + #gpio-cells = <1>; + }; +}; + +&efuse { + sn: sn@32 { + reg = <0x32 0x20>; + }; + + eth_mac: eth_mac@0 { + reg = <0x0 0x6>; + }; + + bt_mac: bt_mac@6 { + reg = <0x6 0x6>; + }; + + wifi_mac: wifi_mac@c { + reg = <0xc 0x6>; + }; + + bid: bid@12 { + reg = <0x12 0x20>; + }; +}; + +ðmac { + status = "okay"; + pinctrl-0 = <ð_rmii_x_pins>; + pinctrl-names = "default"; + phy-handle = <ð_phy0>; + phy-mode = "rmii"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + /* ICPlus IP101A/G Ethernet PHY (vendor_id=0x0243, model_id=0x0c54) */ + eth_phy0: ethernet-phy@0 { + /* compatible = "ethernet-phy-id0243.0c54";*/ + max-speed = <100>; + reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + reset-gpios = <&gpio GPIOZ_5 GPIO_ACTIVE_LOW>; + }; + }; +}; + +/* Internal I2C bus (on CPU module) */ +&i2c1 { + status = "okay"; + pinctrl-0 = <&i2c1_z_pins>; + pinctrl-names = "default"; + + /* RTC */ + pcf8563: pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + status = "okay"; + }; +}; + +/* Peripheral I2C bus (on motherboard) */ +&i2c_AO { + status = "okay"; + pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>; + pinctrl-names = "default"; +}; + +&pwm_ab { + status = "okay"; + pinctrl-0 = <&pwm_a_x20_pins>; + pinctrl-names = "default"; +}; + +/* wifi module */ +&sd_emmc_b { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr104; + max-frequency = <200000000>; + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* emmc storage */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* UART Bluetooth */ +&uart_B { + status = "okay"; + pinctrl-0 = <&uart_b_z_pins>, <&uart_b_z_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>; + }; +}; + +/* UART Console */ +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +/* UART Wireless module */ +&uart_AO_B { + status = "okay"; + pinctrl-0 = <&uart_ao_b_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; + phy-supply = <&usb_pwr>; +}; + +&spicc1 { + status = "okay"; + pinctrl-0 = <&spi1_x_pins>, <&spi1_ss0_x_pins>; + pinctrl-names = "default"; +}; + +&gpio { + gpio-line-names = + "", "", "", "", "", // 0 - 4 + "", "", "", "", "", // 5 - 9 + "UserButton", "", "", "", "", // 10 - 14 + "", "", "", "", "", // 15 - 19 + "", "", "", "", "", // 20 - 24 + "", "LedRed", "LedGreen", "Output3", "Output2", // 25 - 29 + "Output1", "", "", "", "", // 30 - 34 + "", "ZigBeeBOOT", "", "", "", // 35 - 39 + "1Wire", "ZigBeeRESET", "", "Input4", "Input3", // 40 - 44 + "Input2", "Input1", "", "", "", // 45 - 49 + "", "", "", "", "", // 50 - 54 + "", "", "", "", "", // 55 - 59 + "", "", "", "", "", // 60 - 64 + "", "", "", "", "", // 65 - 69 + "", "", "", "", "", // 70 - 74 + "", "", "", "", "", // 75 - 79 + "", "", "", "", "", // 80 - 84 + "", ""; // 85-86 +}; + +&cpu0 { + #cooling-cells = <2>; +}; + +&cpu1 { + #cooling-cells = <2>; +}; + +&cpu2 { + #cooling-cells = <2>; +}; + +&cpu3 { + #cooling-cells = <2>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts new file mode 100644 index 000000000000..e3bb6df42ff3 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts @@ -0,0 +1,405 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 BayLibre SAS. All rights reserved. + */ + +/dts-v1/; + +#include "meson-g12a.dtsi" +#include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + compatible = "radxa,zero", "amlogic,g12a"; + model = "Radxa Zero"; + + aliases { + serial0 = &uart_AO; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + cvbs-connector { + status = "disabled"; + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + ao_5v: regulator-ao_5v { + compatible = "regulator-fixed"; + regulator-name = "AO_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vcc_1v8: regulator-vcc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + hdmi_pw: regulator-hdmi_pw { + compatible = "regulator-fixed"; + regulator-name = "HDMI_PW"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&ao_5v>; + regulator-always-on; + }; + + vddao_1v8: regulator-vddao_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&ao_5v>; + regulator-always-on; + }; + + vddcpu: regulator-vddcpu { + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + vin-supply = <&ao_5v>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "RADXA-ZERO"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; +}; + +&arb { + status = "okay"; +}; + +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + status = "disabled"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&clkc_audio { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu2 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu3 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&hdmi_pw>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&ir { + status = "disabled"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddao_1v8>; +}; + +/* SDIO */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr50; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_1v8>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; + dr_mode = "host"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts index 81269ccc2496..d8838dde0f0f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts @@ -139,7 +139,7 @@ regulator-min-microvolt = <721000>; regulator-max-microvolt = <1022000>; - vin-supply = <&dc_in>; + pwm-supply = <&dc_in>; pwms = <&pwm_AO_cd 1 1250 0>; pwm-dutycycle-range = <100 0>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts index a26bfe72550f..4b5d11e56364 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts @@ -139,7 +139,7 @@ regulator-min-microvolt = <721000>; regulator-max-microvolt = <1022000>; - vin-supply = <&main_12v>; + pwm-supply = <&main_12v>; pwms = <&pwm_AO_cd 1 1250 0>; pwm-dutycycle-range = <100 0>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts index 579f3d02d613..b4e86196e346 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts @@ -139,7 +139,7 @@ regulator-min-microvolt = <721000>; regulator-max-microvolt = <1022000>; - vin-supply = <&dc_in>; + pwm-supply = <&dc_in>; pwms = <&pwm_AO_cd 1 1250 0>; pwm-dutycycle-range = <100 0>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi index f42cf4b8af2d..16dd409051b4 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi @@ -18,7 +18,7 @@ regulator-min-microvolt = <690000>; regulator-max-microvolt = <1050000>; - vin-supply = <&dc_in>; + pwm-supply = <&dc_in>; pwms = <&pwm_ab 0 1250 0>; pwm-dutycycle-range = <100 0>; @@ -37,7 +37,7 @@ regulator-min-microvolt = <690000>; regulator-max-microvolt = <1050000>; - vin-supply = <&vsys_3v3>; + pwm-supply = <&vsys_3v3>; pwms = <&pwm_AO_cd 1 1250 0>; pwm-dutycycle-range = <100 0>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi index 344573e157a7..e8a00a2f8812 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi @@ -99,6 +99,8 @@ regulator-max-microvolt = <5000000>; regulator-always-on; vin-supply = <&main_12v>; + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-high; }; vcc_1v8: regulator-vcc_1v8 { @@ -130,7 +132,7 @@ regulator-min-microvolt = <721000>; regulator-max-microvolt = <1022000>; - vin-supply = <&main_12v>; + pwm-supply = <&main_12v>; pwms = <&pwm_ab 0 1250 0>; pwm-dutycycle-range = <100 0>; @@ -149,7 +151,7 @@ regulator-min-microvolt = <721000>; regulator-max-microvolt = <1022000>; - vin-supply = <&main_12v>; + pwm-supply = <&main_12v>; pwms = <&pwm_AO_cd 1 1250 0>; pwm-dutycycle-range = <100 0>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi index feb088504740..b40d2c1002c9 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi @@ -96,7 +96,7 @@ regulator-min-microvolt = <721000>; regulator-max-microvolt = <1022000>; - vin-supply = <&main_12v>; + pwm-supply = <&main_12v>; pwms = <&pwm_ab 0 1250 0>; pwm-dutycycle-range = <100 0>; @@ -115,7 +115,7 @@ regulator-min-microvolt = <721000>; regulator-max-microvolt = <1022000>; - vin-supply = <&main_12v>; + pwm-supply = <&main_12v>; pwms = <&pwm_AO_cd 1 1250 0>; pwm-dutycycle-range = <100 0>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts new file mode 100644 index 000000000000..6eafb908695f --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts @@ -0,0 +1,241 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Vyacheslav Bocharov <adeep@lexina.in> + * Copyright (c) 2020 JetHome + * Author: Aleksandr Kazantsev <ak@tvip.ru> + * Author: Alexey Shevelkin <ash@tvip.ru> + * Author: Vyacheslav Bocharov <adeep@lexina.in> + */ + +/dts-v1/; + +#include "meson-gxl.dtsi" + +/ { + compatible = "jethome,jethub-j80", "amlogic,s905w", "amlogic,meson-gxl"; + model = "JetHome JetHub J80"; + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + reserved-memory { + linux,cma { + size = <0x0 0x1000000>; + }; + }; + + aliases { + serial0 = &uart_AO; /* Console */ + serial1 = &uart_A; /* Bluetooth */ + serial2 = &uart_AO_B; /* Wireless module 1 */ + serial3 = &uart_C; /* Wireless module 2 */ + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; +}; + +&efuse { + bt_mac: bt_mac@6 { + reg = <0x6 0x6>; + }; + + wifi_mac: wifi_mac@C { + reg = <0xc 0x6>; + }; +}; + +&sn { + reg = <0x32 0x20>; +}; + +ð_mac { + reg = <0x0 0x6>; +}; + +&bid { + reg = <0x12 0x20>; +}; + +&usb { + status = "okay"; + dr_mode = "host"; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; + +/* Wireless SDIO Module */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + + non-removable; + disable-wp; + + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* Console UART */ +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +/* S905W only has access to its internal PHY */ +ðmac { + status = "okay"; + phy-mode = "rmii"; + phy-handle = <&internal_phy>; +}; + +&internal_phy { + status = "okay"; + pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>; + pinctrl-names = "default"; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; +}; + +&uart_C { + status = "okay"; + pinctrl-0 = <&uart_c_pins>; + pinctrl-names = "default"; +}; + +&uart_AO_B { + status = "okay"; + pinctrl-0 = <&uart_ao_b_pins>, <&uart_ao_b_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; +}; + +&i2c_B { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_b_pins>; + + pcf8563: pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + status = "okay"; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts index dde7cfe12cff..50137aafab10 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts @@ -14,6 +14,7 @@ /dts-v1/; #include "meson-gxm.dtsi" +#include <dt-bindings/sound/meson-aiu.h> / { compatible = "kingnovel,r-box-pro", "amlogic,s912", "amlogic,meson-gxm"; @@ -33,6 +34,13 @@ reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 3 GiB */ }; + spdif_dit: audio-codec-0 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + status = "okay"; + sound-name-prefix = "DIT"; + }; + leds { compatible = "gpio-leds"; @@ -90,6 +98,59 @@ clocks = <&wifi32k>; clock-names = "ext_clock"; }; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "RBOX-PRO"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + }; + + dai-link-3 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>; + + codec-0 { + sound-dai = <&spdif_dit>; + }; + }; + + dai-link-4 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&aiu { + status = "okay"; + pinctrl-0 = <&spdif_out_h_pins>; + pinctrl-names = "default"; }; ðmac { diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts index effaa138b5f9..212c6aa5a3b8 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts @@ -173,7 +173,7 @@ regulator-min-microvolt = <690000>; regulator-max-microvolt = <1050000>; - vin-supply = <&dc_in>; + pwm-supply = <&dc_in>; pwms = <&pwm_AO_cd 1 1250 0>; pwm-dutycycle-range = <100 0>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts index f2c098143594..9c0b544e2209 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts @@ -24,7 +24,7 @@ regulator-min-microvolt = <690000>; regulator-max-microvolt = <1050000>; - vin-supply = <&vsys_3v3>; + pwm-supply = <&vsys_3v3>; pwms = <&pwm_AO_cd 1 1250 0>; pwm-dutycycle-range = <100 0>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi index fd0ad85c165b..5779e70caccd 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi @@ -116,7 +116,7 @@ regulator-min-microvolt = <721000>; regulator-max-microvolt = <1022000>; - vin-supply = <&main_12v>; + pwm-supply = <&main_12v>; pwms = <&pwm_AO_cd 1 1250 0>; pwm-dutycycle-range = <100 0>; @@ -263,6 +263,10 @@ reg = <0>; max-speed = <1000>; + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_14 */ interrupts = <26 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts index 2194a778973f..427475846fc7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts @@ -185,7 +185,7 @@ regulator-min-microvolt = <690000>; regulator-max-microvolt = <1050000>; - vin-supply = <&dc_in>; + pwm-supply = <&dc_in>; pwms = <&pwm_AO_cd 1 1500 0>; pwm-dutycycle-range = <100 0>; diff --git a/arch/arm64/boot/dts/apple/t8103-j274.dts b/arch/arm64/boot/dts/apple/t8103-j274.dts index e0f6775b9878..33a80f9501dc 100644 --- a/arch/arm64/boot/dts/apple/t8103-j274.dts +++ b/arch/arm64/boot/dts/apple/t8103-j274.dts @@ -17,6 +17,7 @@ aliases { serial0 = &serial0; + ethernet0 = ðernet0; }; chosen { @@ -43,3 +44,25 @@ &serial0 { status = "okay"; }; + +/* + * Force the bus number assignments so that we can declare some of the + * on-board devices and properties that are populated by the bootloader + * (such as MAC addresses). + */ +&port00 { + bus-range = <1 1>; +}; + +&port01 { + bus-range = <2 2>; +}; + +&port02 { + bus-range = <3 3>; + ethernet0: pci@0,0 { + reg = <0x30000 0x0 0x0 0x0 0x0>; + /* To be filled by the loader */ + local-mac-address = [00 10 18 00 00 00]; + }; +}; diff --git a/arch/arm64/boot/dts/apple/t8103.dtsi b/arch/arm64/boot/dts/apple/t8103.dtsi index a1e22a2ea2e5..fc8b2bb06ffe 100644 --- a/arch/arm64/boot/dts/apple/t8103.dtsi +++ b/arch/arm64/boot/dts/apple/t8103.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/interrupt-controller/apple-aic.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/apple.h> / { compatible = "apple,t8103", "apple,arm-platform"; @@ -131,5 +132,211 @@ interrupt-controller; reg = <0x2 0x3b100000 0x0 0x8000>; }; + + pinctrl_ap: pinctrl@23c100000 { + compatible = "apple,t8103-pinctrl", "apple,pinctrl"; + reg = <0x2 0x3c100000 0x0 0x100000>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_ap 0 0 212>; + apple,npins = <212>; + + interrupt-controller; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 190 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 191 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 192 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 193 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 194 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 195 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 196 IRQ_TYPE_LEVEL_HIGH>; + + pcie_pins: pcie-pins { + pinmux = <APPLE_PINMUX(150, 1)>, + <APPLE_PINMUX(151, 1)>, + <APPLE_PINMUX(32, 1)>; + }; + }; + + pinctrl_aop: pinctrl@24a820000 { + compatible = "apple,t8103-pinctrl", "apple,pinctrl"; + reg = <0x2 0x4a820000 0x0 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_aop 0 0 42>; + apple,npins = <42>; + + interrupt-controller; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 268 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 269 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 270 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 271 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 272 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 273 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 274 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_nub: pinctrl@23d1f0000 { + compatible = "apple,t8103-pinctrl", "apple,pinctrl"; + reg = <0x2 0x3d1f0000 0x0 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_nub 0 0 23>; + apple,npins = <23>; + + interrupt-controller; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 330 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 331 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 332 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 333 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 334 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 335 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 336 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_smc: pinctrl@23e820000 { + compatible = "apple,t8103-pinctrl", "apple,pinctrl"; + reg = <0x2 0x3e820000 0x0 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_smc 0 0 16>; + apple,npins = <16>; + + interrupt-controller; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 391 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 392 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 393 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 394 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 395 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 396 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 397 IRQ_TYPE_LEVEL_HIGH>; + }; + + pcie0_dart_0: dart@681008000 { + compatible = "apple,t8103-dart"; + reg = <0x6 0x81008000 0x0 0x4000>; + #iommu-cells = <1>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 696 IRQ_TYPE_LEVEL_HIGH>; + }; + + pcie0_dart_1: dart@682008000 { + compatible = "apple,t8103-dart"; + reg = <0x6 0x82008000 0x0 0x4000>; + #iommu-cells = <1>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 699 IRQ_TYPE_LEVEL_HIGH>; + }; + + pcie0_dart_2: dart@683008000 { + compatible = "apple,t8103-dart"; + reg = <0x6 0x83008000 0x0 0x4000>; + #iommu-cells = <1>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 702 IRQ_TYPE_LEVEL_HIGH>; + }; + + pcie0: pcie@690000000 { + compatible = "apple,t8103-pcie", "apple,pcie"; + device_type = "pci"; + + reg = <0x6 0x90000000 0x0 0x1000000>, + <0x6 0x80000000 0x0 0x100000>, + <0x6 0x81000000 0x0 0x4000>, + <0x6 0x82000000 0x0 0x4000>, + <0x6 0x83000000 0x0 0x4000>; + reg-names = "config", "rc", "port0", "port1", "port2"; + + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 695 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 698 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 701 IRQ_TYPE_LEVEL_HIGH>; + + msi-controller; + msi-parent = <&pcie0>; + msi-ranges = <&aic AIC_IRQ 704 IRQ_TYPE_EDGE_RISING 32>; + + + iommu-map = <0x100 &pcie0_dart_0 1 1>, + <0x200 &pcie0_dart_1 1 1>, + <0x300 &pcie0_dart_2 1 1>; + iommu-map-mask = <0xff00>; + + bus-range = <0 3>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x43000000 0x6 0xa0000000 0x6 0xa0000000 0x0 0x20000000>, + <0x02000000 0x0 0xc0000000 0x6 0xc0000000 0x0 0x40000000>; + + pinctrl-0 = <&pcie_pins>; + pinctrl-names = "default"; + + port00: pci@0,0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + reset-gpios = <&pinctrl_ap 152 0>; + max-link-speed = <2>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &port00 0 0 0 0>, + <0 0 0 2 &port00 0 0 0 1>, + <0 0 0 3 &port00 0 0 0 2>, + <0 0 0 4 &port00 0 0 0 3>; + }; + + port01: pci@1,0 { + device_type = "pci"; + reg = <0x800 0x0 0x0 0x0 0x0>; + reset-gpios = <&pinctrl_ap 153 0>; + max-link-speed = <2>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &port01 0 0 0 0>, + <0 0 0 2 &port01 0 0 0 1>, + <0 0 0 3 &port01 0 0 0 2>, + <0 0 0 4 &port01 0 0 0 3>; + }; + + port02: pci@2,0 { + device_type = "pci"; + reg = <0x1000 0x0 0x0 0x0 0x0>; + reset-gpios = <&pinctrl_ap 33 0>; + max-link-speed = <1>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &port02 0 0 0 0>, + <0 0 0 2 &port02 0 0 0 1>, + <0 0 0 3 &port02 0 0 0 2>, + <0 0 0 4 &port02 0 0 0 3>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi index fefd2b5f0176..be42932f7e21 100644 --- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi @@ -160,64 +160,75 @@ apbregs@10000 { compatible = "syscon", "simple-mfd"; reg = <0x010000 0x1000>; + ranges = <0x0 0x10000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; - led0 { + led@8,0 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x01>; label = "vexpress:0"; linux,default-trigger = "heartbeat"; default-state = "on"; }; - led1 { + led@8,1 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x02>; label = "vexpress:1"; linux,default-trigger = "mmc0"; default-state = "off"; }; - led2 { + led@8,2 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x04>; label = "vexpress:2"; linux,default-trigger = "cpu0"; default-state = "off"; }; - led3 { + led@8,3 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x08>; label = "vexpress:3"; linux,default-trigger = "cpu1"; default-state = "off"; }; - led4 { + led@8,4 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x10>; label = "vexpress:4"; linux,default-trigger = "cpu2"; default-state = "off"; }; - led5 { + led@8,5 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x20>; label = "vexpress:5"; linux,default-trigger = "cpu3"; default-state = "off"; }; - led6 { + led@8,6 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x40>; label = "vexpress:6"; default-state = "off"; }; - led7 { + led@8,7 { compatible = "register-bit-led"; + reg = <0x08 0x04>; offset = <0x08>; mask = <0x80>; label = "vexpress:7"; diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index 11eae3e3a944..c6882032a428 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \ bcm2711-rpi-4-b.dtb \ + bcm2711-rpi-cm4-io.dtb \ bcm2837-rpi-3-a-plus.dtb \ bcm2837-rpi-3-b.dtb \ bcm2837-rpi-3-b-plus.dtb \ diff --git a/arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts new file mode 100644 index 000000000000..e36d395e3951 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts @@ -0,0 +1,2 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "arm/bcm2711-rpi-cm4-io.dts" diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi index a5a64d17d9ea..984c737fa627 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi @@ -292,11 +292,11 @@ reg = <0x640 0x18>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; clocks = <&periph_clk>; - clock-names = "periph"; + clock-names = "refclk"; status = "okay"; }; - nand@1800 { + nand-controller@1800 { #address-cells = <1>; #size-cells = <0>; compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand"; @@ -326,12 +326,12 @@ #reset-cells = <1>; }; }; + }; - reboot { - compatible = "syscon-reboot"; - regmap = <&timer>; - offset = <0x34>; - mask = <1>; - }; + reboot { + compatible = "syscon-reboot"; + regmap = <&timer>; + offset = <0x34>; + mask = <1>; }; }; diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile index e0a2facde6a2..b41e86df0a84 100644 --- a/arch/arm64/boot/dts/exynos/Makefile +++ b/arch/arm64/boot/dts/exynos/Makefile @@ -2,4 +2,5 @@ dtb-$(CONFIG_ARCH_EXYNOS) += \ exynos5433-tm2.dtb \ exynos5433-tm2e.dtb \ - exynos7-espresso.dtb + exynos7-espresso.dtb \ + exynosautov9-sadk.dtb diff --git a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi index 8997f8f2b96c..72ccf18eb9d1 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi @@ -87,7 +87,7 @@ status = "disabled"; }; - bus_g2d_400_opp_table: opp-table2 { + bus_g2d_400_opp_table: opp-table-2 { compatible = "operating-points-v2"; opp-shared; @@ -117,7 +117,7 @@ }; }; - bus_g2d_266_opp_table: opp-table3 { + bus_g2d_266_opp_table: opp-table-3 { compatible = "operating-points-v2"; opp-267000000 { @@ -137,7 +137,7 @@ }; }; - bus_gscl_opp_table: opp-table4 { + bus_gscl_opp_table: opp-table-4 { compatible = "operating-points-v2"; opp-333000000 { @@ -151,7 +151,7 @@ }; }; - bus_hevc_opp_table: opp-table5 { + bus_hevc_opp_table: opp-table-5 { compatible = "operating-points-v2"; opp-shared; @@ -175,7 +175,7 @@ }; }; - bus_noc2_opp_table: opp-table6 { + bus_noc2_opp_table: opp-table-6 { compatible = "operating-points-v2"; opp-400000000 { diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts index fdd0796b29d4..aca01709fd29 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts @@ -13,6 +13,7 @@ / { model = "Samsung TM2 board"; compatible = "samsung,tm2", "samsung,exynos5433"; + chassis-type = "handset"; }; &cmu_disp { diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts index 089fc7a1af67..22d26460f3dd 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts @@ -13,6 +13,7 @@ / { model = "Samsung TM2E board"; compatible = "samsung,tm2e", "samsung,exynos5433"; + chassis-type = "handset"; }; &cmu_disp { diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 6a6f7dd1d65c..4422021cf4b2 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -239,7 +239,7 @@ }; }; - cluster_a53_opp_table: opp-table0 { + cluster_a53_opp_table: opp-table-0 { compatible = "operating-points-v2"; opp-shared; @@ -285,7 +285,7 @@ }; }; - cluster_a57_opp_table: opp-table1 { + cluster_a57_opp_table: opp-table-1 { compatible = "operating-points-v2"; opp-shared; @@ -1132,7 +1132,7 @@ }; syscon_fsys: syscon@156f0000 { - compatible = "syscon"; + compatible = "samsung,exynos5433-sysreg", "syscon"; reg = <0x156f0000 0x1044>; }; diff --git a/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi new file mode 100644 index 000000000000..2407b03b5404 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi @@ -0,0 +1,1189 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's ExynosAutov9 SoC pin-mux and pin-config device tree source + * + * Copyright (c) 2021 Samsung Electronics Co., Ltd. + * + * Samsung's ExynosAutov9 SoC pin-mux and pin-config options are listed as + * device tree nodes in this file. + */ + +#include <dt-bindings/pinctrl/samsung.h> + +&pinctrl_alive { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + }; + + dp0_hpd: dp0-hpd-pins { + samsung,pins = "gpa1-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + }; + + dp1_hpd: dp1-hpd-pins { + samsung,pins = "gpa1-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + }; + + gpq0: gpq0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + speedy0_bus: speedy0-bus-pins { + samsung,pins = "gpq0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + }; + + speedy1_bus: speedy1-bus-pins { + samsung,pins = "gpa0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + }; +}; + +&pinctrl_aud { + gpb0: gpb0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb1: gpb1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb2: gpb2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb3: gpb3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + aud_codec_mclk: aud-codec-mclk-pins { + samsung,pins = "gpb0-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + aud_codec_mclk_idle: aud-codec-mclk-idle-pins { + samsung,pins = "gpb0-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + aud_i2s0_bus: aud-i2s0-pins { + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + aud_i2s0_idle: aud-i2s0-idle-pins { + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + aud_i2s1_bus: aud-i2s1-pins { + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + aud_i2s1_idle: aud-i2s1-idle-pins { + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + aud_i2s2_bus: aud-i2s2-pins { + samsung,pins = "gpb1-4", "gpb1-5", "gpb1-6", "gpb1-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + aud_i2s2_idle: aud-i2s2-idle-pins { + samsung,pins = "gpb1-4", "gpb1-5", "gpb1-6", "gpb1-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + aud_i2s3_bus: aud-i2s3-pins { + samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + aud_i2s3_idle: aud-i2s3-idle-pins { + samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + aud_i2s4_bus: aud-i2s4-pins { + samsung,pins = "gpb2-4", "gpb2-5", "gpb2-6", "gpb2-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + aud_i2s4_idle: aud-i2s4-idle-pins { + samsung,pins = "gpb2-4", "gpb2-5", "gpb2-6", "gpb2-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + aud_i2s5_bus: aud-i2s5-pins { + samsung,pins = "gpb3-0", "gpb3-1", "gpb3-2", "gpb3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + aud_i2s5_idle: aaud-i2s5-idle-pins { + samsung,pins = "gpb3-0", "gpb3-1", "gpb3-2", "gpb3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + aud_i2s6_bus: aud-i2s6-pins { + samsung,pins = "gpb3-4", "gpb3-5", "gpb3-6", "gpb3-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + aud_i2s6_idle: aaud-i2s6-idle-pins { + samsung,pins = "gpb3-4", "gpb3-5", "gpb3-6", "gpb3-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; +}; + +&pinctrl_fsys0 { + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcie_clkreq0: pcie-clkreq0-pins { + samsung,pins = "gpf0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>; + }; + + pcie_perst0_out: pcie-perst0-out-pins { + samsung,pins = "gpf0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + }; + + pcie_perst0_in: pcie-perst0-in-pins { + samsung,pins = "gpf0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + }; + + pcie_clkreq1: pcie-clkreq1-pins { + samsung,pins = "gpf0-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>; + }; + + pcie_perst1_out: pcie-perst1-out-pins { + samsung,pins = "gpf0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + }; + + pcie_perst1_in: pcie-perst1-in-pins { + samsung,pins = "gpf0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + }; + + pcie_clkreq2: pcie-clkreq2-pins { + samsung,pins = "gpf0-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>; + }; + + pcie_perst2_out: pcie-perst2-out-pins { + samsung,pins = "gpf0-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + }; + + pcie_perst2_in: pcie-perst2-in-pins { + samsung,pins = "gpf0-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + }; + + pcie_clkreq3: pcie-clkreq3-pins { + samsung,pins = "gpf1-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>; + }; + + pcie_perst3_out: pcie-perst3-out-pins { + samsung,pins = "gpf1-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + }; + + pcie_perst3_in: pcie-perst3-in-pins { + samsung,pins = "gpf1-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + }; + + pcie_clkreq4: pcie-clkreq4-pins { + samsung,pins = "gpf1-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>; + }; + + pcie_perst4_out: pcie-perst4-out-pins { + samsung,pins = "gpf1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + }; + + pcie_perst4_in: pcie-perst4-in-pins { + samsung,pins = "gpf1-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + }; + + pcie_clkreq5: pcie-clkreq5-pins { + samsung,pins = "gpf1-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>; + }; + + pcie_perst5_out: pcie-perst5-out-pins { + samsung,pins = "gpf1-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + }; + + pcie_perst5_in: pcie-perst5-in-pins { + samsung,pins = "gpf1-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + }; +}; + +&pinctrl_fsys1 { + gpf8: gpf8 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd2_clk: sd2-clk-pins { + samsung,pins = "gpf8-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <2>; /* 2x drive strength */ + }; + + sd2_cmd: sd2-cmd-pins { + samsung,pins = "gpf8-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <2>; /* 2x drive strength */ + }; + + sd2_bus1: sd2-bus-width1-pins { + samsung,pins = "gpf8-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <2>; /* 2x drive strength */ + }; + + sd2_bus4: sd2-bus-width4-pins { + samsung,pins = "gpf8-3", "gpf8-4", "gpf8-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <2>; /* 2x drive strength */ + }; +}; + +&pinctrl_fsys2 { + gpf2: gpf2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf3: gpf3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf4: gpf4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf5: gpf5 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf6: gpf6 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + ufs_rst_n: ufs-rst-n-pins { + samsung,pins = "gpf2-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + }; + + ufs_refclk_out: ufs-refclk-out-pins { + samsung,pins = "gpf2-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + }; + + ufs_rst_n_1: ufs-rst-n-1-pins { + samsung,pins = "gpf2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + }; + + ufs_refclk_out_1: ufs-refclk-out-1-pins { + samsung,pins = "gpf2-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>; + }; + + eth0_mdc_mdio: eth0-mdc-mdio-pins { + samsung,pins = "gpf4-5", "gpf4-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + }; + + eth0_rgmii: eth0-rgmii-pins { + samsung,pins = "gpf3-1", "gpf3-2", "gpf3-3", "gpf3-4", + "gpf3-5", "gpf3-6", "gpf3-7", "gpf4-0", + "gpf4-1", "gpf4-2", "gpf4-3", "gpf4-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + }; + + eth0_pps_out: eth0-pps-out-pins { + samsung,pins = "gpf3-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + eth1_mdc_mdio: eth1-mdc-mdio-pins { + samsung,pins = "gpf6-5", "gpf6-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + }; + + eth1_rgmii: eth1-rgmii-pins { + samsung,pins = "gpf5-1", "gpf5-2", "gpf5-3", "gpf5-4", + "gpf5-5", "gpf5-6", "gpf5-7", "gpf6-0", + "gpf6-1", "gpf6-2", "gpf6-3", "gpf6-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + }; + + eth1_pps_out: eth1-pps-out-pins { + samsung,pins = "gpf5-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; +}; + +&pinctrl_peric0 { + gpp0: gpp0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp1: gpp1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp2: gpp2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg0: gpg0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pwm_tout0: pwm-tout0-pins { + samsung,pins = "gpg0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + pwm_tout1: pwm-tout1-pins { + samsung,pins = "gpg0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + pwm_tout2: pwm-tout2-pins { + samsung,pins = "gpg0-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + pwm_tout3: pwm-tout3-pins { + samsung,pins = "gpg0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* PERIC0 USI00 */ + hsi2c0_bus: hsi2c0-bus-pins { + samsung,pins = "gpp0-0", "gpp0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* PERIC0 USI00_I2C */ + hsi2c1_bus: hsi2c1-bus-pins { + samsung,pins = "gpp0-2", "gpp0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* PERIC0 USI01 */ + hsi2c2_bus: hsi2c2-bus-pins { + samsung,pins = "gpp0-4", "gpp0-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* PERIC0 USI01_I2C */ + hsi2c3_bus: hsi2c3-bus-pins { + samsung,pins = "gpp0-6", "gpp0-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* PERIC0 USI02 */ + hsi2c4_bus: hsi2c4-bus-pins { + samsung,pins = "gpp1-0", "gpp1-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* PERIC0 USI02_I2C */ + hsi2c5_bus: hsi2c5-bus-pins { + samsung,pins = "gpp1-2", "gpp1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* PERIC0 USI03 */ + hsi2c6_bus: hsi2c6-bus-pins { + samsung,pins = "gpp1-4", "gpp1-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* PERIC0 USI03_I2C */ + hsi2c7_bus: hsi2c7-bus-pins { + samsung,pins = "gpp1-6", "gpp1-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* PERIC0 USI04 */ + hsi2c8_bus: hsi2c8-bus-pins { + samsung,pins = "gpp2-0", "gpp2-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* PERIC0 USI04_I2C */ + hsi2c9_bus: hsi2c9-bus-pins { + samsung,pins = "gpp2-2", "gpp2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* PERIC0 USI05 */ + hsi2c10_bus: hsi2c10-bus-pins { + samsung,pins = "gpp2-4", "gpp2-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* PERIC0 USI05_I2C */ + hsi2c11_bus: hsi2c11-bus-pins { + samsung,pins = "gpp2-6", "gpp2-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI USI_PERIC0_USI00_SPI */ + spi0_bus: spi0-bus-pins { + samsung,pins = "gpp0-2", "gpp0-1", "gpp0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi0_cs: spi0-cs-pins { + samsung,pins = "gpp0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi0_cs_func: spi0-cs-func-pins { + samsung,pins = "gpp0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* PERIC0 USI01_SPI */ + spi1_bus: spi1-bus-pins { + samsung,pins = "gpp0-6", "gpp0-5", "gpp0-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi1_cs: spi1-cs-pins { + samsung,pins = "gpp0-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi1_cs_func: spi1-cs-func-pins { + samsung,pins = "gpp0-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* PERIC0 USI02_SPI */ + spi2_bus: spi2-bus-pins { + samsung,pins = "gpp1-2", "gpp1-1", "gpp1-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi2_cs: spi2-cs-pins { + samsung,pins = "gpp1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi2_cs_func: spi2-cs-func-pins { + samsung,pins = "gpp1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* PERIC0 USI03_SPI */ + spi3_bus: spi3-bus-pins { + samsung,pins = "gpp1-6", "gpp1-5", "gpp1-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi3_cs: spi3-cs-pins { + samsung,pins = "gpp1-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi3_cs_func: spi3-cs-func-pins { + samsung,pins = "gpp1-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* PERIC0 USI04_SPI */ + spi4_bus: spi4-bus-pins { + samsung,pins = "gpp2-2", "gpp2-1", "gpp2-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi4_cs: spi4-cs-pins { + samsung,pins = "gpp2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi4_cs_func: spi4-cs-func-pins { + samsung,pins = "gpp2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* PERIC0 USI05_SPI */ + spi5_bus: spi5-bus-pins { + samsung,pins = "gpp2-6", "gpp2-5", "gpp2-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi5_cs: spi5-cs-pins { + samsung,pins = "gpp2-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi5_cs_func: spi5-cs-func-pins { + samsung,pins = "gpp2-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* USI_PERIC0_USI00_UART */ + uart0_bus: uart0-bus-pins { + samsung,pins = "gpp0-0", "gpp0-1", "gpp0-2", "gpp0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart0_bus_dual: uart0-bus-dual-pins { + samsung,pins = "gpp0-0", "gpp0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* USI_PERIC0_USI01_UART */ + uart1_bus: uart1-bus-pins { + samsung,pins = "gpp0-4", "gpp0-5", "gpp0-6", "gpp0-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart1_bus_dual: uart1-bus-dual-pins { + samsung,pins = "gpp0-4", "gpp0-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* USI_PERIC0_USI02_UART */ + uart2_bus: uart2-bus-pins { + samsung,pins = "gpp1-0", "gpp1-1", "gpp1-2", "gpp1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart2_bus_dual: uart2-bus-dual-pins { + samsung,pins = "gpp1-0", "gpp1-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* USI_PERIC0_USI03_UART */ + uart3_bus: uart3-bus-pins { + samsung,pins = "gpp1-4", "gpp1-5", "gpp1-6", "gpp1-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart3_bus_dual: uart3-bus-dual-pins { + samsung,pins = "gpp1-4", "gpp1-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* USI_PERIC0_USI04_UART */ + uart4_bus: uart4-bus-pins { + samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2", "gpp2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart4_bus_dual: uart4-bus-dual-pins { + samsung,pins = "gpp2-0", "gpp2-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* USI_PERIC0_USI05_UART */ + uart5_bus: uart5-bus-pins { + samsung,pins = "gpp2-4", "gpp2-5", "gpp2-6", "gpp2-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart5_bus_dual: uart5-bus-dual-pins { + samsung,pins = "gpp2-4", "gpp2-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; +}; + +&pinctrl_peric1 { + gpp3: gpp3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp4: gpp4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp5: gpp5 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg1: gpg1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg2: gpg2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg3: gpg3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + /* PERIC1 USI06 */ + hsi2c12_bus: hsi2c12-bus-pins { + samsung,pins = "gpp3-0", "gpp3-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + /* PERIC1 USI06_I2C */ + hsi2c13_bus: hsi2c13-bus-pins { + samsung,pins = "gpp3-2", "gpp3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + /* PERIC1 USI07 */ + hsi2c14_bus: hsi2c14-bus-pins { + samsung,pins = "gpp3-4", "gpp3-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + /* PERIC1 USI07_I2C */ + hsi2c15_bus: hsi2c15-bus-pins { + samsung,pins = "gpp3-6", "gpp3-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + /* PERIC1 USI08 */ + hsi2c16_bus: hsi2c16-bus-pins { + samsung,pins = "gpp4-0", "gpp4-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + /* PERIC1 USI08_I2C */ + hsi2c17_bus: hsi2c17-bus-pins { + samsung,pins = "gpp4-2", "gpp4-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + /* PERIC1 USI09 */ + hsi2c18_bus: hsi2c18-bus-pins { + samsung,pins = "gpp4-4", "gpp4-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + /* PERIC1 USI09_I2C */ + hsi2c19_bus: hsi2c19-bus-pins { + samsung,pins = "gpp4-6", "gpp4-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + /* PERIC1 USI10 */ + hsi2c20_bus: hsi2c20-bus-pins { + samsung,pins = "gpp5-0", "gpp5-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + /* PERIC1 USI10_I2C */ + hsi2c21_bus: hsi2c21-bus-pins { + samsung,pins = "gpp5-2", "gpp5-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + /* PERIC1 USI11 */ + hsi2c22_bus: hsi2c22-bus-pins { + samsung,pins = "gpp5-4", "gpp5-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + /* PERIC1 USI11_I2C */ + hsi2c23_bus: hsi2c23-bus-pins { + samsung,pins = "gpp5-6", "gpp5-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + /* PERIC1 USI06_SPI */ + spi6_bus: spi6-bus-pins { + samsung,pins = "gpp3-2", "gpp3-1", "gpp3-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + spi6_cs: spi6-cs-pins { + samsung,pins = "gpp3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + spi6_cs_func: spi6-cs-func-pins { + samsung,pins = "gpp3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + /* PERIC1 USI07_SPI */ + spi7_bus: spi7-bus-pins { + samsung,pins = "gpp3-6", "gpp3-5", "gpp3-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + spi7_cs: spi7-cs-pins { + samsung,pins = "gpp3-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + spi7_cs_func: spi7-cs-func-pins { + samsung,pins = "gpp3-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + /* PERIC1 USI08_SPI */ + spi8_bus: spi8-bus-pins { + samsung,pins = "gpp4-2", "gpp4-1", "gpp4-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + spi8_cs: spi8-cs-pins { + samsung,pins = "gpp4-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + spi8_cs_func: spi8-cs-func-pins { + samsung,pins = "gpp4-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + /* PERIC1 USI09_SPI */ + spi9_bus: spi9-bus-pins { + samsung,pins = "gpp4-6", "gpp4-5", "gpp4-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + spi9_cs: spi9-cs-pins { + samsung,pins = "gpp4-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + spi9_cs_func: spi9-cs-func-pins { + samsung,pins = "gpp4-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + /* PERIC1 USI10_SPI */ + spi10_bus: spi10-pins { + samsung,pins = "gpp5-2", "gpp5-1", "gpp5-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + spi10_cs: spi10-cs-pins { + samsung,pins = "gpp5-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + spi10_cs_func: spi10-cs-func-pins { + samsung,pins = "gpp5-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + /* PERIC1 USI11_SPI */ + spi11_bus: spi11-pins { + samsung,pins = "gpp3-6", "gpp3-5", "gpp3-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + spi11_cs: spi11-cs-pins { + samsung,pins = "gpp3-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + spi11_cs_func: spi11-cs-func-pins { + samsung,pins = "gpp3-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + /* USI_PERIC1_USI06_UART */ + uart6_bus: uart6-bus-pins { + samsung,pins = "gpp3-3", "gpp3-2", "gpp3-1", "gpp3-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart6_bus_dual: uart6-bus-dual-pins { + samsung,pins = "gpp3-0", "gpp3-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* USI_PERIC1_USI07_UART */ + uart7_bus: uart7-bus-pins { + samsung,pins = "gpp3-7", "gpp3-6", "gpp3-5", "gpp3-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart7_bus_dual: uart7-bus-dual-pins { + samsung,pins = "gpp3-4", "gpp3-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* USI_PERIC1_USI08_UART */ + uart8_bus: uart8-bus-pins { + samsung,pins = "gpp4-3", "gpp4-2", "gpp4-1", "gpp4-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart8_bus_dual: uart8-bus-dual-pins { + samsung,pins = "gpp4-0", "gpp4-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* USI_PERIC1_USI09_UART */ + uart9_bus: uart9-bus-pins { + samsung,pins = "gpp4-7", "gpp4-6", "gpp4-5", "gpp4-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart9_bus_dual: uart9-bus-dual-pins { + samsung,pins = "gpp4-4", "gpp4-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* USI_PERIC1_USI10_UART */ + uart10_bus: uart10-bus-pins { + samsung,pins = "gpp5-3", "gpp5-2", "gpp5-1", "gpp5-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart10_bus_dual: uart10-bus-dual-pins { + samsung,pins = "gpp5-0", "gpp5-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* USI_PERIC1_USI11_UART */ + uart11_bus: uart11-bus-pins { + samsung,pins = "gpp5-7", "gpp5-6", "gpp5-5", "gpp5-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart11_bus_dual: uart11-bus-dual-pins { + samsung,pins = "gpp5-4", "gpp5-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; +}; diff --git a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts new file mode 100644 index 000000000000..ef46d7aa6e28 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung ExynosAutov9 SADK board device tree source + * + * Copyright (c) 2021 Samsung Electronics Co., Ltd. + * + */ + +/dts-v1/; +#include "exynosautov9.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Samsung ExynosAuto v9 SADK board"; + compatible = "samsung,exynosautov9-sadk", "samsung,exynosautov9"; + + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &serial_0; + }; + + chosen { + stdout-path = &serial_0; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x77000000>, + <0x8 0x80000000 0x1 0x7ba00000>, + <0xa 0x00000000 0x2 0x00000000>; + }; + + ufs_0_fixed_vcc_reg: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "ufs-vcc"; + gpio = <&gpq0 1 GPIO_ACTIVE_HIGH>; + regulator-boot-on; + enable-active-high; + }; +}; + +&serial_0 { + status = "okay"; +}; + +&ufs_0_phy { + status = "okay"; +}; + +&ufs_0 { + status = "okay"; + vcc-supply = <&ufs_0_fixed_vcc_reg>; + vcc-fixed-regulator; +}; diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi new file mode 100644 index 000000000000..3e4727344b4a --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi @@ -0,0 +1,306 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's ExynosAuto v9 SoC device tree source + * + * Copyright (c) 2021 Samsung Electronics Co., Ltd. + * + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "samsung,exynosautov9"; + #address-cells = <2>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + aliases { + pinctrl0 = &pinctrl_alive; + pinctrl1 = &pinctrl_aud; + pinctrl2 = &pinctrl_fsys0; + pinctrl3 = &pinctrl_fsys1; + pinctrl4 = &pinctrl_fsys2; + pinctrl5 = &pinctrl_peric0; + pinctrl6 = &pinctrl_peric1; + }; + + arm-pmu { + compatible = "arm,cortex-a76-pmu"; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>, + <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu4>; + }; + core1 { + cpu = <&cpu5>; + }; + core2 { + cpu = <&cpu6>; + }; + core3 { + cpu = <&cpu7>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x0>; + enable-method = "psci"; + }; + + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x100>; + enable-method = "psci"; + }; + + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x200>; + enable-method = "psci"; + }; + + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x300>; + enable-method = "psci"; + }; + + cpu4: cpu@10000 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x10000>; + enable-method = "psci"; + }; + + cpu5: cpu@10100 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x10100>; + enable-method = "psci"; + }; + + cpu6: cpu@10200 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x10200>; + enable-method = "psci"; + }; + + cpu7: cpu@10300 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x10300>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + cpu_suspend = <0xc4000001>; + cpu_off = <0x84000002>; + cpu_on = <0xc4000003>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; + + fixed-rate-clocks { + xtcxo: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "oscclk"; + }; + + /* + * Keep the stub clock for serial driver, until proper clock + * driver is implemented. + */ + uart_clock: uart-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133250000>; + clock-output-names = "uart"; + }; + + /* + * Keep the stub clock for ufs driver, until proper clock + * driver is implemented. + */ + ufs_core_clock: ufs-core-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <166562500>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x20000000>; + + chipid@10000000 { + compatible = "samsung,exynos850-chipid"; + reg = <0x10000000 0x24>; + }; + + gic: interrupt-controller@10101000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x10101000 0x1000>, + <0x10102000 0x2000>, + <0x10104000 0x2000>, + <0x10106000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + pinctrl_alive: pinctrl@10450000 { + compatible = "samsung,exynosautov9-pinctrl"; + reg = <0x10450000 0x1000>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos7-wakeup-eint"; + }; + }; + + pinctrl_aud: pinctrl@19c60000{ + compatible = "samsung,exynosautov9-pinctrl"; + reg = <0x19c60000 0x1000>; + }; + + pinctrl_fsys0: pinctrl@17740000 { + compatible = "samsung,exynosautov9-pinctrl"; + reg = <0x17740000 0x1000>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_fsys1: pinctrl@17060000 { + compatible = "samsung,exynosautov9-pinctrl"; + reg = <0x17060000 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_fsys2: pinctrl@17c30000 { + compatible = "samsung,exynosautov9-pinctrl"; + reg = <0x17c30000 0x1000>; + interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_peric0: pinctrl@10230000 { + compatible = "samsung,exynosautov9-pinctrl"; + reg = <0x10230000 0x1000>; + interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_peric1: pinctrl@10830000 { + compatible = "samsung,exynosautov9-pinctrl"; + reg = <0x10830000 0x1000>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + }; + + pmu_system_controller: system-controller@10460000 { + compatible = "samsung,exynos7-pmu", "syscon"; + reg = <0x10460000 0x10000>; + }; + + syscon_fsys2: syscon@17c20000 { + compatible = "samsung,exynosautov9-sysreg", "syscon"; + reg = <0x17c20000 0x1000>; + }; + + /* USI: UART */ + serial_0: uart@10300000 { + compatible = "samsung,exynos850-uart"; + reg = <0x10300000 0x100>; + interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_bus_dual>; + clocks = <&uart_clock>, <&uart_clock>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + ufs_0_phy: ufs0-phy@17e04000 { + compatible = "samsung,exynosautov9-ufs-phy"; + reg = <0x17e04000 0xc00>; + reg-names = "phy-pma"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <0>; + clocks = <&xtcxo>; + clock-names = "ref_clk"; + status = "disabled"; + }; + + ufs_0: ufs0@17e00000 { + compatible ="samsung,exynosautov9-ufs"; + + reg = <0x17e00000 0x100>, /* 0: HCI standard */ + <0x17e01100 0x410>, /* 1: Vendor-specific */ + <0x17e80000 0x8000>, /* 2: UNIPRO */ + <0x17dc0000 0x2200>; /* 3: UFS protector */ + reg-names = "hci", "vs_hci", "unipro", "ufsp"; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ufs_core_clock>, + <&ufs_core_clock>; + clock-names = "core_clk", "sclk_unipro_main"; + freq-table-hz = <0 0>, <0 0>; + pinctrl-names = "default"; + pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>; + phys = <&ufs_0_phy>; + phy-names = "ufs-phy"; + samsung,sysreg = <&syscon_fsys2>; + samsung,ufs-shareability-reg-offset = <0x710>; + status = "disabled"; + }; + }; +}; + +#include "exynosautov9-pinctrl.dtsi" diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index db9e36ebe932..a14a6173b765 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -25,6 +25,8 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-bluebox3.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-bluebox3-rev-a.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-clearfog-cx.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-honeycomb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb @@ -70,4 +72,6 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb +dtb-$(CONFIG_ARCH_S32) += s32g274a-evb.dtb +dtb-$(CONFIG_ARCH_S32) += s32g274a-rdb2.dtb dtb-$(CONFIG_ARCH_S32) += s32v234-evb.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts index 79f155dedb2d..e662677a6e28 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts @@ -15,6 +15,7 @@ compatible = "fsl,ls1012a-rdb", "fsl,ls1012a"; aliases { + serial0 = &duart0; mmc0 = &esdhc0; mmc1 = &esdhc1; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts index e8d31279b7a3..7cd29ab970d9 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts @@ -8,7 +8,7 @@ * None of the four SerDes lanes are used by the module, instead they are * all led out to the carrier for customer use. * - * Copyright (C) 2020 Michael Walle <michael@walle.cc> + * Copyright (C) 2021 Michael Walle <michael@walle.cc> * */ @@ -21,43 +21,39 @@ compatible = "kontron,sl28-var1", "kontron,sl28", "fsl,ls1028a"; }; +&enetc_mdio_pf3 { + /* Delete unused phy node */ + /delete-node/ ethernet-phy@5; + + phy0: ethernet-phy@4 { + reg = <0x4>; + eee-broken-1000t; + eee-broken-100tx; + qca,clk-out-frequency = <125000000>; + qca,clk-out-strength = <AR803X_STRENGTH_FULL>; + qca,keep-pll-enabled; + vddio-supply = <&vddio>; + + vddio: vddio-regulator { + regulator-name = "VDDIO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddh: vddh-regulator { + regulator-name = "VDDH"; + }; + }; +}; + &enetc_port0 { status = "disabled"; - /* - * Delete both the phy-handle to the old phy0 label as well as - * the mdio node with the old phy node with the old phy0 label. - */ + /* Delete the phy-handle to the old phy0 label */ /delete-property/ phy-handle; - /delete-node/ mdio; }; &enetc_port1 { phy-handle = <&phy0>; - phy-connection-type = "rgmii-id"; + phy-mode = "rgmii-id"; status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy0: ethernet-phy@4 { - reg = <0x4>; - eee-broken-1000t; - eee-broken-100tx; - qca,clk-out-frequency = <125000000>; - qca,clk-out-strength = <AR803X_STRENGTH_FULL>; - qca,keep-pll-enabled; - vddio-supply = <&vddio>; - - vddio: vddio-regulator { - regulator-name = "VDDIO"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vddh: vddh-regulator { - regulator-name = "VDDH"; - }; - }; - }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts index f6a79c8080d1..330e34f933a3 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts @@ -5,7 +5,7 @@ * This is for the network variant 2 which has two ethernet ports. These * ports are connected to the internal switch. * - * Copyright (C) 2020 Michael Walle <michael@walle.cc> + * Copyright (C) 2021 Michael Walle <michael@walle.cc> * */ @@ -18,12 +18,6 @@ }; &enetc_mdio_pf3 { - phy0: ethernet-phy@5 { - reg = <0x5>; - eee-broken-1000t; - eee-broken-100tx; - }; - phy1: ethernet-phy@4 { reg = <0x4>; eee-broken-1000t; @@ -34,14 +28,11 @@ &enetc_port0 { status = "disabled"; /* - * In the base device tree the PHY was registered in the mdio - * subnode as it is PHY for this port. On this module this PHY - * is connected to a switch port instead and registered above. - * Therefore, delete the mdio subnode as well as the phy-handle - * property here. + * In the base device tree the PHY at address 5 was assigned for + * this port. On this module this PHY is connected to a switch + * port instead. Therefore, delete the phy-handle property here. */ /delete-property/ phy-handle; - /delete-node/ mdio; }; &enetc_port2 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts index e65d1c477e2c..9b5e92fb753e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts @@ -5,7 +5,7 @@ * This is for the network variant 4 which has two ethernet ports. It * extends the base and provides one more port connected via RGMII. * - * Copyright (C) 2019 Michael Walle <michael@walle.cc> + * Copyright (C) 2021 Michael Walle <michael@walle.cc> * */ @@ -18,33 +18,30 @@ compatible = "kontron,sl28-var4", "kontron,sl28", "fsl,ls1028a"; }; -&enetc_port1 { - phy-handle = <&phy1>; - phy-connection-type = "rgmii-id"; - status = "okay"; +&enetc_mdio_pf3 { + phy1: ethernet-phy@4 { + reg = <0x4>; + eee-broken-1000t; + eee-broken-100tx; + qca,clk-out-frequency = <125000000>; + qca,clk-out-strength = <AR803X_STRENGTH_FULL>; + qca,keep-pll-enabled; + vddio-supply = <&vddio>; - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy1: ethernet-phy@4 { - reg = <0x4>; - eee-broken-1000t; - eee-broken-100tx; - qca,clk-out-frequency = <125000000>; - qca,clk-out-strength = <AR803X_STRENGTH_FULL>; - qca,keep-pll-enabled; - vddio-supply = <&vddio>; - - vddio: vddio-regulator { - regulator-name = "VDDIO"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; + vddio: vddio-regulator { + regulator-name = "VDDIO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - vddh: vddh-regulator { - regulator-name = "VDDH"; - }; + vddh: vddh-regulator { + regulator-name = "VDDH"; }; }; }; + +&enetc_port1 { + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts index a92ecb331cdc..d74e738e4070 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts @@ -2,7 +2,7 @@ /* * Device Tree file for the Kontron SMARC-sAL28 board. * - * Copyright (C) 2019 Michael Walle <michael@walle.cc> + * Copyright (C) 2021 Michael Walle <michael@walle.cc> * */ @@ -80,22 +80,19 @@ status = "okay"; }; +&enetc_mdio_pf3 { + phy0: ethernet-phy@5 { + reg = <0x5>; + eee-broken-1000t; + eee-broken-100tx; + }; +}; + &enetc_port0 { phy-handle = <&phy0>; - phy-connection-type = "sgmii"; + phy-mode = "sgmii"; managed = "in-band-status"; status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy0: ethernet-phy@5 { - reg = <0x5>; - eee-broken-1000t; - eee-broken-100tx; - }; - }; }; &esdhc { @@ -309,3 +306,11 @@ &lpuart1 { status = "okay"; }; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts index bfd14b64567e..6e2a1da662fb 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts @@ -320,7 +320,7 @@ &enetc_port1 { phy-handle = <&qds_phy1>; - phy-connection-type = "rgmii-id"; + phy-mode = "rgmii-id"; status = "okay"; }; @@ -335,3 +335,11 @@ &sata { status = "okay"; }; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts index d7b527272500..7719f44bcaed 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts @@ -197,6 +197,10 @@ }; &enetc_mdio_pf3 { + sgmii_phy0: ethernet-phy@2 { + reg = <0x2>; + }; + /* VSC8514 QSGMII quad PHY */ qsgmii_phy0: ethernet-phy@10 { reg = <0x10>; @@ -217,17 +221,9 @@ &enetc_port0 { phy-handle = <&sgmii_phy0>; - phy-connection-type = "sgmii"; + phy-mode = "sgmii"; managed = "in-band-status"; status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - sgmii_phy0: ethernet-phy@2 { - reg = <0x2>; - }; - }; }; &enetc_port2 { @@ -287,6 +283,11 @@ status = "okay"; }; +&usb0 { + status = "okay"; +}; + &usb1 { dr_mode = "otg"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 06b36cc65865..fd3f3e8bb6ce 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -80,13 +80,6 @@ clock-output-names = "phy_27m"; }; - dpclk: clock-controller@f1f0000 { - compatible = "fsl,ls1028a-plldig"; - reg = <0x0 0xf1f0000 0x0 0xffff>; - #clock-cells = <0>; - clocks = <&osc_27m>; - }; - firmware { optee: optee { compatible = "linaro,optee-tz"; @@ -592,6 +585,7 @@ snps,dis_rxdet_inp3_quirk; snps,quirk-frame-length-adjustment = <0x20>; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + status = "disabled"; }; usb1: usb@3110000 { @@ -602,6 +596,7 @@ snps,dis_rxdet_inp3_quirk; snps,quirk-frame-length-adjustment = <0x20>; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + status = "disabled"; }; sata: sata@3200000 { @@ -800,6 +795,38 @@ clock-names = "wdog_clk", "apb_pclk"; }; + malidp0: display@f080000 { + compatible = "arm,mali-dp500"; + reg = <0x0 0xf080000 0x0 0x10000>; + interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, + <0 223 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "DE", "SE"; + clocks = <&dpclk>, + <&clockgen QORIQ_CLK_HWACCEL 2>, + <&clockgen QORIQ_CLK_HWACCEL 2>, + <&clockgen QORIQ_CLK_HWACCEL 2>; + clock-names = "pxlclk", "mclk", "aclk", "pclk"; + arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; + arm,malidp-arqos-value = <0xd000d000>; + + port { + dpi0_out: endpoint { + + }; + }; + }; + + gpu: gpu@f0c0000 { + compatible = "vivante,gc"; + reg = <0x0 0xf0c0000 0x0 0x10000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_HWACCEL 2>, + <&clockgen QORIQ_CLK_HWACCEL 2>, + <&clockgen QORIQ_CLK_HWACCEL 2>; + clock-names = "core", "shader", "bus"; + #cooling-cells = <2>; + }; + sai1: audio-controller@f100000 { #sound-dai-cells = <0>; compatible = "fsl,vf610-sai"; @@ -926,6 +953,13 @@ status = "disabled"; }; + dpclk: clock-controller@f1f0000 { + compatible = "fsl,ls1028a-plldig"; + reg = <0x0 0xf1f0000 0x0 0x10000>; + #clock-cells = <0>; + clocks = <&osc_27m>; + }; + tmu: tmu@1f80000 { compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f80000 0x0 0x10000>; @@ -1025,6 +1059,7 @@ fixed-link { speed = <2500>; full-duplex; + pause; }; }; @@ -1083,6 +1118,7 @@ fixed-link { speed = <2500>; full-duplex; + pause; }; }; @@ -1094,6 +1130,7 @@ fixed-link { speed = <1000>; full-duplex; + pause; }; }; }; @@ -1108,6 +1145,7 @@ fixed-link { speed = <1000>; full-duplex; + pause; }; }; @@ -1139,24 +1177,4 @@ }; }; - malidp0: display@f080000 { - compatible = "arm,mali-dp500"; - reg = <0x0 0xf080000 0x0 0x10000>; - interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, - <0 223 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "DE", "SE"; - clocks = <&dpclk>, - <&clockgen QORIQ_CLK_HWACCEL 2>, - <&clockgen QORIQ_CLK_HWACCEL 2>, - <&clockgen QORIQ_CLK_HWACCEL 2>; - clock-names = "pxlclk", "mclk", "aclk", "pclk"; - arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; - arm,malidp-arqos-value = <0xd000d000>; - - port { - dp0_out: endpoint { - - }; - }; - }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index f85e437f80b7..f891ef6a3754 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -241,18 +241,18 @@ interrupt-controller; reg = <0x14 4>; interrupt-map = - <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, - <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, - <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, - <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, - <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, - <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, - <11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + <0 0 &gic 0 0 GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic 0 0 GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic 0 0 GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic 0 0 GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic 0 0 GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic 0 0 GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <6 0 &gic 0 0 GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <7 0 &gic 0 0 GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <8 0 &gic 0 0 GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <9 0 &gic 0 0 GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <10 0 &gic 0 0 GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <11 0 &gic 0 0 GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; interrupt-map-mask = <0xffffffff 0x0>; }; }; @@ -847,7 +847,7 @@ }; cluster1_core0_watchdog: wdt@c000000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc000000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>, @@ -857,7 +857,7 @@ }; cluster1_core1_watchdog: wdt@c010000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc010000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>, @@ -867,7 +867,7 @@ }; cluster1_core2_watchdog: wdt@c020000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc020000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>, @@ -877,7 +877,7 @@ }; cluster1_core3_watchdog: wdt@c030000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc030000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>, @@ -887,7 +887,7 @@ }; cluster2_core0_watchdog: wdt@c100000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc100000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>, @@ -897,7 +897,7 @@ }; cluster2_core1_watchdog: wdt@c110000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc110000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>, @@ -907,7 +907,7 @@ }; cluster2_core2_watchdog: wdt@c120000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc120000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>, @@ -917,7 +917,7 @@ }; cluster2_core3_watchdog: wdt@c130000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc130000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>, diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index 801ba9612d36..3cb9c21d2775 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -293,18 +293,18 @@ interrupt-controller; reg = <0x14 4>; interrupt-map = - <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, - <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, - <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, - <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, - <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, - <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, - <11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + <0 0 &gic 0 0 GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic 0 0 GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic 0 0 GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic 0 0 GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic 0 0 GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic 0 0 GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <6 0 &gic 0 0 GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <7 0 &gic 0 0 GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <8 0 &gic 0 0 GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <9 0 &gic 0 0 GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <10 0 &gic 0 0 GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <11 0 &gic 0 0 GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; interrupt-map-mask = <0xffffffff 0x0>; }; }; @@ -387,7 +387,7 @@ }; cluster1_core0_watchdog: wdt@c000000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc000000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>, @@ -397,7 +397,7 @@ }; cluster1_core1_watchdog: wdt@c010000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc010000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>, @@ -407,7 +407,7 @@ }; cluster2_core0_watchdog: wdt@c100000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc100000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>, @@ -417,7 +417,7 @@ }; cluster2_core1_watchdog: wdt@c110000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc110000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>, @@ -427,7 +427,7 @@ }; cluster3_core0_watchdog: wdt@c200000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc200000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>, @@ -437,7 +437,7 @@ }; cluster3_core1_watchdog: wdt@c210000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc210000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>, @@ -447,7 +447,7 @@ }; cluster4_core0_watchdog: wdt@c300000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc300000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>, @@ -457,7 +457,7 @@ }; cluster4_core1_watchdog: wdt@c310000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc310000 0x0 0x1000>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>, diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3-rev-a.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3-rev-a.dts new file mode 100644 index 000000000000..15d273c93154 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3-rev-a.dts @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2160A BLUEBOX3 +// +// Copyright 2020-2021 NXP + +/dts-v1/; + +#include "fsl-lx2160a-bluebox3.dts" + +/ { + compatible = "fsl,lx2160a-bluebox3-rev-a", "fsl,lx2160a"; +}; + +/* The RGMII PHYs have a different MDIO address */ +&emdio1 { + /delete-node/ ethernet-phy@5; + + sw1_mii3_phy: ethernet-phy@1 { + /* AR8035 */ + compatible = "ethernet-phy-id004d.d072"; + reg = <0x1>; + interrupts-extended = <&extirq 6 IRQ_TYPE_LEVEL_LOW>; + }; + + /delete-node/ ethernet-phy@6; + + sw2_mii3_phy: ethernet-phy@2 { + /* AR8035 */ + compatible = "ethernet-phy-id004d.d072"; + reg = <0x2>; + interrupts-extended = <&extirq 7 IRQ_TYPE_LEVEL_LOW>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts new file mode 100644 index 000000000000..b21be03da0af --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts @@ -0,0 +1,658 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2160A BLUEBOX3 +// +// Copyright 2020-2021 NXP + +/dts-v1/; + +#include "fsl-lx2160a.dtsi" + +/ { + model = "NXP Layerscape LX2160ABLUEBOX3"; + compatible = "fsl,lx2160a-bluebox3", "fsl,lx2160a"; + + aliases { + crypto = &crypto; + mmc0 = &esdhc0; + mmc1 = &esdhc1; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + sb_3v3: regulator-sb3v3 { + compatible = "regulator-fixed"; + regulator-name = "MC34717-3.3VSB"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&can0 { + status = "okay"; + + can-transceiver { + max-bitrate = <5000000>; + }; +}; + +&can1 { + status = "okay"; + + can-transceiver { + max-bitrate = <5000000>; + }; +}; + +&crypto { + status = "okay"; +}; + +&dpmac5 { + phy-handle = <&aqr113c_phy1>; + phy-mode = "usxgmii"; + managed = "in-band-status"; +}; + +&dpmac6 { + phy-handle = <&aqr113c_phy2>; + phy-mode = "usxgmii"; + managed = "in-band-status"; +}; + +&dpmac9 { + phy-handle = <&aqr113c_phy3>; + phy-mode = "usxgmii"; + managed = "in-band-status"; +}; + +&dpmac10 { + phy-handle = <&aqr113c_phy4>; + phy-mode = "usxgmii"; + managed = "in-band-status"; +}; + +&dpmac17 { + phy-mode = "rgmii"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&dpmac18 { + phy-mode = "rgmii"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&emdio1 { + status = "okay"; + + aqr113c_phy2: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + /* IRQ_10G_PHY2 */ + interrupts-extended = <&extirq 3 IRQ_TYPE_LEVEL_LOW>; + }; + + aqr113c_phy1: ethernet-phy@8 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x8>; + /* IRQ_10G_PHY1 */ + interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>; + }; + + sw1_mii3_phy: ethernet-phy@5 { + /* AR8035 */ + compatible = "ethernet-phy-id004d.d072"; + reg = <0x5>; + interrupts-extended = <&extirq 6 IRQ_TYPE_LEVEL_LOW>; + }; + + sw2_mii3_phy: ethernet-phy@6 { + /* AR8035 */ + compatible = "ethernet-phy-id004d.d072"; + reg = <0x6>; + interrupts-extended = <&extirq 7 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&emdio2 { + status = "okay"; + + aqr113c_phy4: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + /* IRQ_10G_PHY4 */ + interrupts-extended = <&extirq 5 IRQ_TYPE_LEVEL_LOW>; + }; + + aqr113c_phy3: ethernet-phy@8 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x8>; + /* IRQ_10G_PHY3 */ + interrupts-extended = <&extirq 4 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&esdhc0 { + sd-uhs-sdr104; + sd-uhs-sdr50; + sd-uhs-sdr25; + sd-uhs-sdr12; + status = "okay"; +}; + +&esdhc1 { + mmc-hs200-1_8v; + mmc-hs400-1_8v; + bus-width = <8>; + status = "okay"; +}; + +&fspi { + status = "okay"; + + mt35xu512aba0: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + m25p,fast-read; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <8>; + spi-tx-bus-width = <8>; + }; + + mt35xu512aba1: flash@1 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <1>; + m25p,fast-read; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <8>; + spi-tx-bus-width = <8>; + }; +}; + +&i2c0 { + status = "okay"; + + i2c-mux@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + power-monitor@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <500>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + temp2: temperature-sensor@48 { + compatible = "nxp,sa56004"; + reg = <0x48>; + vcc-supply = <&sb_3v3>; + #thermal-sensor-cells = <1>; + }; + + temp1: temperature-sensor@4c { + compatible = "nxp,sa56004"; + reg = <0x4c>; + vcc-supply = <&sb_3v3>; + #thermal-sensor-cells = <1>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + interrupts-extended = <&extirq 11 IRQ_TYPE_LEVEL_LOW>; + }; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7>; + + i2c-mux@75 { + compatible = "nxp,pca9547"; + reg = <0x75>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + spi_bridge: spi@28 { + compatible = "nxp,sc18is602b"; + reg = <0x28>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + }; + }; +}; + +&i2c5 { + status = "okay"; + + i2c-mux@77 { + compatible = "nxp,pca9846"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + + /* The I2C multiplexer and temperature sensors are on + * the T6 riser card. + */ + i2c-mux@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x6>; + + q12: temperature-sensor@4c { + compatible = "nxp,sa56004"; + reg = <0x4c>; + vcc-supply = <&sb_3v3>; + #thermal-sensor-cells = <1>; + }; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7>; + + q11: temperature-sensor@4c { + compatible = "nxp,sa56004"; + reg = <0x4c>; + vcc-supply = <&sb_3v3>; + #thermal-sensor-cells = <1>; + }; + + q13: temperature-sensor@48 { + compatible = "nxp,sa56004"; + reg = <0x48>; + vcc-supply = <&sb_3v3>; + #thermal-sensor-cells = <1>; + }; + + q14: temperature-sensor@4a { + compatible = "nxp,sa56004"; + reg = <0x4a>; + vcc-supply = <&sb_3v3>; + #thermal-sensor-cells = <1>; + }; + }; + }; + }; + }; +}; + +&pcs_mdio5 { + status = "okay"; +}; + +&pcs_mdio6 { + status = "okay"; +}; + +&pcs_mdio9 { + status = "okay"; +}; + +&pcs_mdio10 { + status = "okay"; +}; + +&spi_bridge { + sw1: ethernet-switch@0 { + compatible = "nxp,sja1110a"; + reg = <0>; + spi-max-frequency = <4000000>; + spi-cpol; + dsa,member = <0 0>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* Microcontroller port */ + port@0 { + reg = <0>; + status = "disabled"; + }; + + /* SW1_P1 */ + port@1 { + reg = <1>; + label = "con_2x20"; + phy-mode = "sgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@2 { + reg = <2>; + ethernet = <&dpmac17>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@3 { + reg = <3>; + label = "1ge_p1"; + phy-mode = "rgmii-id"; + phy-handle = <&sw1_mii3_phy>; + }; + + sw1p4: port@4 { + reg = <4>; + link = <&sw2p1>; + phy-mode = "sgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@5 { + reg = <5>; + label = "trx1"; + phy-mode = "internal"; + phy-handle = <&sw1_port5_base_t1_phy>; + }; + + port@6 { + reg = <6>; + label = "trx2"; + phy-mode = "internal"; + phy-handle = <&sw1_port6_base_t1_phy>; + }; + + port@7 { + reg = <7>; + label = "trx3"; + phy-mode = "internal"; + phy-handle = <&sw1_port7_base_t1_phy>; + }; + + port@8 { + reg = <8>; + label = "trx4"; + phy-mode = "internal"; + phy-handle = <&sw1_port8_base_t1_phy>; + }; + + port@9 { + reg = <9>; + label = "trx5"; + phy-mode = "internal"; + phy-handle = <&sw1_port9_base_t1_phy>; + }; + + port@a { + reg = <10>; + label = "trx6"; + phy-mode = "internal"; + phy-handle = <&sw1_port10_base_t1_phy>; + }; + }; + + mdios { + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + compatible = "nxp,sja1110-base-t1-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + sw1_port5_base_t1_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x1>; + }; + + sw1_port6_base_t1_phy: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x2>; + }; + + sw1_port7_base_t1_phy: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x3>; + }; + + sw1_port8_base_t1_phy: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x4>; + }; + + sw1_port9_base_t1_phy: ethernet-phy@5 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x5>; + }; + + sw1_port10_base_t1_phy: ethernet-phy@6 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x6>; + }; + }; + }; + }; + + sw2: ethernet-switch@2 { + compatible = "nxp,sja1110a"; + reg = <2>; + spi-max-frequency = <4000000>; + spi-cpol; + dsa,member = <0 1>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* Microcontroller port */ + port@0 { + reg = <0>; + status = "disabled"; + }; + + sw2p1: port@1 { + reg = <1>; + link = <&sw1p4>; + phy-mode = "sgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@2 { + reg = <2>; + ethernet = <&dpmac18>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@3 { + reg = <3>; + label = "1ge_p2"; + phy-mode = "rgmii-id"; + phy-handle = <&sw2_mii3_phy>; + }; + + port@4 { + reg = <4>; + label = "to_sw3"; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + }; + }; + + port@5 { + reg = <5>; + label = "trx7"; + phy-mode = "internal"; + phy-handle = <&sw2_port5_base_t1_phy>; + }; + + port@6 { + reg = <6>; + label = "trx8"; + phy-mode = "internal"; + phy-handle = <&sw2_port6_base_t1_phy>; + }; + + port@7 { + reg = <7>; + label = "trx9"; + phy-mode = "internal"; + phy-handle = <&sw2_port7_base_t1_phy>; + }; + + port@8 { + reg = <8>; + label = "trx10"; + phy-mode = "internal"; + phy-handle = <&sw2_port8_base_t1_phy>; + }; + + port@9 { + reg = <9>; + label = "trx11"; + phy-mode = "internal"; + phy-handle = <&sw2_port9_base_t1_phy>; + }; + + port@a { + reg = <10>; + label = "trx12"; + phy-mode = "internal"; + phy-handle = <&sw2_port10_base_t1_phy>; + }; + }; + + mdios { + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + compatible = "nxp,sja1110-base-t1-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + sw2_port5_base_t1_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x1>; + }; + + sw2_port6_base_t1_phy: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x2>; + }; + + sw2_port7_base_t1_phy: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x3>; + }; + + sw2_port8_base_t1_phy: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x4>; + }; + + sw2_port9_base_t1_phy: ethernet-phy@5 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x5>; + }; + + sw2_port10_base_t1_phy: ethernet-phy@6 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x6>; + }; + }; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index c4b1a59ba424..dc8661ebd1f6 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -680,18 +680,18 @@ interrupt-controller; reg = <0x14 4>; interrupt-map = - <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, - <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, - <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, - <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, - <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, - <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, - <11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + <0 0 &gic 0 0 GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic 0 0 GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic 0 0 GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic 0 0 GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic 0 0 GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic 0 0 GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <6 0 &gic 0 0 GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <7 0 &gic 0 0 GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <8 0 &gic 0 0 GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <9 0 &gic 0 0 GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <10 0 &gic 0 0 GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <11 0 &gic 0 0 GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; interrupt-map-mask = <0xffffffff 0x0>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts index e99e7644ff39..d40caf14ac4a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts @@ -123,8 +123,8 @@ ethphy: ethernet-phy@0 { reg = <0>; - reset-assert-us = <100>; - reset-deassert-us = <100>; + reset-assert-us = <1>; + reset-deassert-us = <15000>; reset-gpios = <&gpio4 27 GPIO_ACTIVE_LOW>; }; }; @@ -191,8 +191,10 @@ }; &usdhc2 { - pinctrl-names = "default"; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; vmmc-supply = <®_vdd_3v3>; vqmmc-supply = <®_nvcc_sd>; cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; @@ -321,4 +323,28 @@ MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 >; }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + >; + }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi index 42bbbb3f532b..22a5ef771d4e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi @@ -63,7 +63,7 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; status = "okay"; spi-flash@0 { @@ -86,6 +86,7 @@ pinctrl-0 = <&pinctrl_pmic>; interrupt-parent = <&gpio1>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; regulators { reg_vdd_soc: BUCK1 { @@ -228,6 +229,7 @@ pinctrl_pmic: pmicgrp { fsl,pins = < MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x141 + MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x141 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi index 8e4a0ce99790..28012279f6f6 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi @@ -57,7 +57,7 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi2>; - cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi index b7c91bdc21dd..27afa46a253a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi @@ -76,7 +76,7 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi2>; - cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi index d2ffd62a3bd4..a59e849c7be2 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi @@ -96,7 +96,7 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi2>; - cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts index bafd5c8ea4e2..21c546c4628d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts @@ -255,6 +255,10 @@ }; }; +&disp_blk_ctrl { + status = "disabled"; +}; + &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; @@ -282,6 +286,14 @@ }; }; +&gpu_2d { + status = "disabled"; +}; + +&gpu_3d { + status = "disabled"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -632,6 +644,18 @@ status = "okay"; }; +&pgc_gpu { + status = "disabled"; +}; + +&pgc_gpumix { + status = "disabled"; +}; + +&pgc_mipi { + status = "disabled"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index 2f632e8ca388..c2f3f118f82e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -7,6 +7,8 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/imx8mm-power.h> +#include <dt-bindings/reset/imx8mq-reset.h> #include <dt-bindings/thermal/thermal.h> #include "imx8mm-pinfunc.h" @@ -610,6 +612,111 @@ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; #reset-cells = <1>; }; + + gpc: gpc@303a0000 { + compatible = "fsl,imx8mm-gpc"; + reg = <0x303a0000 0x10000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <3>; + + pgc { + #address-cells = <1>; + #size-cells = <0>; + + pgc_hsiomix: power-domain@0 { + #power-domain-cells = <0>; + reg = <IMX8MM_POWER_DOMAIN_HSIOMIX>; + clocks = <&clk IMX8MM_CLK_USB_BUS>; + assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>; + }; + + pgc_pcie: power-domain@1 { + #power-domain-cells = <0>; + reg = <IMX8MM_POWER_DOMAIN_PCIE>; + power-domains = <&pgc_hsiomix>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>; + }; + + pgc_otg1: power-domain@2 { + #power-domain-cells = <0>; + reg = <IMX8MM_POWER_DOMAIN_OTG1>; + power-domains = <&pgc_hsiomix>; + }; + + pgc_otg2: power-domain@3 { + #power-domain-cells = <0>; + reg = <IMX8MM_POWER_DOMAIN_OTG2>; + power-domains = <&pgc_hsiomix>; + }; + + pgc_gpumix: power-domain@4 { + #power-domain-cells = <0>; + reg = <IMX8MM_POWER_DOMAIN_GPUMIX>; + clocks = <&clk IMX8MM_CLK_GPU_BUS_ROOT>, + <&clk IMX8MM_CLK_GPU_AHB>; + assigned-clocks = <&clk IMX8MM_CLK_GPU_AXI>, + <&clk IMX8MM_CLK_GPU_AHB>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>, + <&clk IMX8MM_SYS_PLL1_800M>; + assigned-clock-rates = <800000000>, <400000000>; + }; + + pgc_gpu: power-domain@5 { + #power-domain-cells = <0>; + reg = <IMX8MM_POWER_DOMAIN_GPU>; + clocks = <&clk IMX8MM_CLK_GPU_AHB>, + <&clk IMX8MM_CLK_GPU_BUS_ROOT>, + <&clk IMX8MM_CLK_GPU2D_ROOT>, + <&clk IMX8MM_CLK_GPU3D_ROOT>; + resets = <&src IMX8MQ_RESET_GPU_RESET>; + power-domains = <&pgc_gpumix>; + }; + + pgc_vpumix: power-domain@6 { + #power-domain-cells = <0>; + reg = <IMX8MM_POWER_DOMAIN_VPUMIX>; + clocks = <&clk IMX8MM_CLK_VPU_DEC_ROOT>; + assigned-clocks = <&clk IMX8MM_CLK_VPU_BUS>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>; + resets = <&src IMX8MQ_RESET_VPU_RESET>; + }; + + pgc_vpu_g1: power-domain@7 { + #power-domain-cells = <0>; + reg = <IMX8MM_POWER_DOMAIN_VPUG1>; + }; + + pgc_vpu_g2: power-domain@8 { + #power-domain-cells = <0>; + reg = <IMX8MM_POWER_DOMAIN_VPUG2>; + }; + + pgc_vpu_h1: power-domain@9 { + #power-domain-cells = <0>; + reg = <IMX8MM_POWER_DOMAIN_VPUH1>; + }; + + pgc_dispmix: power-domain@10 { + #power-domain-cells = <0>; + reg = <IMX8MM_POWER_DOMAIN_DISPMIX>; + clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>, + <&clk IMX8MM_CLK_DISP_AXI_ROOT>; + assigned-clocks = <&clk IMX8MM_CLK_DISP_AXI>, + <&clk IMX8MM_CLK_DISP_APB>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>, + <&clk IMX8MM_SYS_PLL1_800M>; + assigned-clock-rates = <500000000>, <200000000>; + }; + + pgc_mipi: power-domain@11 { + #power-domain-cells = <0>; + reg = <IMX8MM_POWER_DOMAIN_MIPI>; + }; + }; + }; }; aips2: bus@30400000 { @@ -961,6 +1068,33 @@ #size-cells = <1>; ranges = <0x32c00000 0x32c00000 0x400000>; + disp_blk_ctrl: blk-ctrl@32e28000 { + compatible = "fsl,imx8mm-disp-blk-ctrl", "syscon"; + reg = <0x32e28000 0x100>; + power-domains = <&pgc_dispmix>, <&pgc_dispmix>, + <&pgc_dispmix>, <&pgc_mipi>, + <&pgc_mipi>; + power-domain-names = "bus", "csi-bridge", + "lcdif", "mipi-dsi", + "mipi-csi"; + clocks = <&clk IMX8MM_CLK_DISP_AXI_ROOT>, + <&clk IMX8MM_CLK_DISP_APB_ROOT>, + <&clk IMX8MM_CLK_CSI1_ROOT>, + <&clk IMX8MM_CLK_DISP_AXI_ROOT>, + <&clk IMX8MM_CLK_DISP_APB_ROOT>, + <&clk IMX8MM_CLK_DISP_ROOT>, + <&clk IMX8MM_CLK_DSI_CORE>, + <&clk IMX8MM_CLK_DSI_PHY_REF>, + <&clk IMX8MM_CLK_CSI1_CORE>, + <&clk IMX8MM_CLK_CSI1_PHY_REF>; + clock-names = "csi-bridge-axi","csi-bridge-apb", + "csi-bridge-core", "lcdif-axi", + "lcdif-apb", "lcdif-pix", + "dsi-pclk", "dsi-ref", + "csi-aclk", "csi-pclk"; + #power-domain-cells = <1>; + }; + usbotg1: usb@32e40000 { compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb"; reg = <0x32e40000 0x200>; @@ -971,6 +1105,7 @@ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>; phys = <&usbphynop1>; fsl,usbmisc = <&usbmisc1 0>; + power-domains = <&pgc_otg1>; status = "disabled"; }; @@ -990,6 +1125,7 @@ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>; phys = <&usbphynop2>; fsl,usbmisc = <&usbmisc2 0>; + power-domains = <&pgc_otg2>; status = "disabled"; }; @@ -1030,6 +1166,50 @@ status = "disabled"; }; + gpu_3d: gpu@38000000 { + compatible = "vivante,gc"; + reg = <0x38000000 0x8000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_GPU_AHB>, + <&clk IMX8MM_CLK_GPU_BUS_ROOT>, + <&clk IMX8MM_CLK_GPU3D_ROOT>, + <&clk IMX8MM_CLK_GPU3D_ROOT>; + clock-names = "reg", "bus", "core", "shader"; + assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>, + <&clk IMX8MM_GPU_PLL_OUT>; + assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>; + assigned-clock-rates = <0>, <1000000000>; + power-domains = <&pgc_gpu>; + }; + + gpu_2d: gpu@38008000 { + compatible = "vivante,gc"; + reg = <0x38008000 0x8000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_GPU_AHB>, + <&clk IMX8MM_CLK_GPU_BUS_ROOT>, + <&clk IMX8MM_CLK_GPU2D_ROOT>; + clock-names = "reg", "bus", "core"; + assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>, + <&clk IMX8MM_GPU_PLL_OUT>; + assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>; + assigned-clock-rates = <0>, <1000000000>; + power-domains = <&pgc_gpu>; + }; + + vpu_blk_ctrl: blk-ctrl@38330000 { + compatible = "fsl,imx8mm-vpu-blk-ctrl", "syscon"; + reg = <0x38330000 0x100>; + power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>, + <&pgc_vpu_g2>, <&pgc_vpu_h1>; + power-domain-names = "bus", "g1", "g2", "h1"; + clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>, + <&clk IMX8MM_CLK_VPU_G2_ROOT>, + <&clk IMX8MM_CLK_VPU_H1_ROOT>; + clock-names = "g1", "g2", "h1"; + #power-domain-cells = <1>; + }; + gic: interrupt-controller@38800000 { compatible = "arm,gic-v3"; reg = <0x38800000 0x10000>, /* GIC Dist */ diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 9b07b26230a1..04d259de5667 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -785,7 +785,7 @@ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MP_CLK_QSPI_ROOT>, <&clk IMX8MP_CLK_QSPI_ROOT>; - clock-names = "fspi", "fspi_en"; + clock-names = "fspi_en", "fspi"; assigned-clock-rates = <80000000>; assigned-clocks = <&clk IMX8MP_CLK_QSPI>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi index 460ef0d86540..60d47c71499b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi @@ -40,12 +40,14 @@ label = "VOL_DOWN"; gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <50>; }; vol-up { label = "VOL_UP"; gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; + debounce-interval = <50>; }; }; @@ -138,9 +140,14 @@ reg_wifi_3v3: regulator-wifi-3v3 { compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_pwr>; regulator-name = "3V3_WIFI"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + gpio = <&gpio3 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_vdd_3v3>; }; sound { @@ -193,6 +200,14 @@ }; }; + usdhc2_pwrseq: pwrseq { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bt>, <&pinctrl_wifi_disable>; + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>, + <&gpio4 29 GPIO_ACTIVE_HIGH>; + }; + bm818_codec: sound-wwan-codec { compatible = "broadmobi,bm818", "option,gtm601"; #sound-dai-cells = <0>; @@ -225,7 +240,7 @@ &ddrc { operating-points-v2 = <&ddrc_opp_table>; - ddrc_opp_table: ddrc-opp-table { + ddrc_opp_table: opp-table { compatible = "operating-points-v2"; opp-25M { @@ -307,6 +322,13 @@ >; }; + pinctrl_bt: btgrp { + fsl,pins = < + /* BT_REG_ON */ + MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x83 + >; + }; + pinctrl_charger_in: chargeringrp { fsl,pins = < /* CHRG_INT */ @@ -638,6 +660,20 @@ >; }; + pinctrl_wifi_disable: wifidisablegrp { + fsl,pins = < + /* WIFI_REG_ON */ + MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29 0x83 + >; + }; + + pinctrl_wifi_pwr: wifipwrgrp { + fsl,pins = < + /* WIFI3V3_EN */ + MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10 0x83 + >; + }; + pinctrl_wdog: wdoggrp { fsl,pins = < /* nWDOG */ @@ -1010,6 +1046,7 @@ vddi-supply = <®_lcd_1v8>; backlight = <&backlight_dsi>; reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; + mantix,tp-rstn-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; port { panel_in: endpoint { @@ -1055,13 +1092,13 @@ &pwm3 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_led_g>; + pinctrl-0 = <&pinctrl_led_r>; status = "okay"; }; &pwm4 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_led_r>; + pinctrl-0 = <&pinctrl_led_g>; status = "okay"; }; @@ -1199,7 +1236,10 @@ pinctrl-2 = <&pinctrl_usdhc2_200mhz>; bus-width = <4>; vmmc-supply = <®_wifi_3v3>; + mmc-pwrseq = <&usdhc2_pwrseq>; + post-power-on-delay-ms = <1000>; cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + max-frequency = <50000000>; disable-wp; cap-sdio-irq; keep-power-in-suspend; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts index 2535268f0984..4f2db6197b39 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts @@ -202,6 +202,7 @@ pinctrl_usdhc2: usdhc2grp { fsl,pins = < + MX8MQ_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x0 MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi index a08a568c31d9..2222ef7b3eab 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi @@ -555,6 +555,7 @@ <&clk IMX8MQ_CLK_PCIE1_PHY>, <&pcie0_refclk>; clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + vph-supply = <&vgen5_reg>; status = "okay"; }; @@ -567,6 +568,7 @@ <&clk IMX8MQ_CLK_PCIE2_PHY>, <&pcie1_refclk>; clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + vph-supply = <&vgen5_reg>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 4066b1612655..972766b67a15 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -1467,10 +1467,9 @@ #size-cells = <2>; device_type = "pci"; bus-range = <0x00 0xff>; - ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000 /* downstream I/O 64KB */ - 0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */ + ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */ + <0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */ num-lanes = <1>; - num-viewport = <4>; interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; @@ -1505,10 +1504,9 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - ranges = <0x81000000 0 0x00000000 0x27f80000 0 0x00010000 /* downstream I/O 64KB */ - 0x82000000 0 0x20000000 0x20000000 0 0x07f00000>; /* non-prefetchable memory */ + ranges = <0x81000000 0 0x00000000 0x27f80000 0 0x00010000>, /* downstream I/O 64KB */ + <0x82000000 0 0x20000000 0x20000000 0 0x07f00000>; /* non-prefetchable memory */ num-lanes = <1>; - num-viewport = <4>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi new file mode 100644 index 000000000000..59ea8a25aa4c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * NXP S32G2 SoC family + * + * Copyright (c) 2021 SUSE LLC + * Copyright (c) 2017-2021 NXP + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "nxp,s32g2"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&cluster0_l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + enable-method = "psci"; + next-level-cache = <&cluster0_l2>; + }; + + cpu2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x100>; + enable-method = "psci"; + next-level-cache = <&cluster1_l2>; + }; + + cpu3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x101>; + enable-method = "psci"; + next-level-cache = <&cluster1_l2>; + }; + + cluster0_l2: l2-cache0 { + compatible = "cache"; + }; + + cluster1_l2: l2-cache1 { + compatible = "cache"; + }; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; + + firmware { + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x80000000>; + + uart0: serial@401c8000 { + compatible = "nxp,s32g2-linflexuart", + "fsl,s32v234-linflexuart"; + reg = <0x401c8000 0x3000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + uart1: serial@401cc000 { + compatible = "nxp,s32g2-linflexuart", + "fsl,s32v234-linflexuart"; + reg = <0x401cc000 0x3000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + uart2: serial@402bc000 { + compatible = "nxp,s32g2-linflexuart", + "fsl,s32v234-linflexuart"; + reg = <0x402bc000 0x3000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + gic: interrupt-controller@50800000 { + compatible = "arm,gic-v3"; + reg = <0x50800000 0x10000>, + <0x50880000 0x80000>, + <0x50400000 0x2000>, + <0x50410000 0x2000>, + <0x50420000 0x2000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/s32g274a-evb.dts b/arch/arm64/boot/dts/freescale/s32g274a-evb.dts new file mode 100644 index 000000000000..9118d8d2ee01 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/s32g274a-evb.dts @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2021 SUSE LLC + * Copyright (c) 2019-2021 NXP + */ + +/dts-v1/; + +#include "s32g2.dtsi" + +/ { + model = "NXP S32G2 Evaluation Board (S32G-VNP-EVB)"; + compatible = "nxp,s32g274a-evb", "nxp,s32g2"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + /* 4GiB RAM */ + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0 0x80000000>, + <0x8 0x80000000 0 0x80000000>; + }; +}; + +/* UART (J58) to Micro USB port */ +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts new file mode 100644 index 000000000000..e05ee854cdf5 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2021 SUSE LLC + * Copyright (c) 2019-2021 NXP + */ + +/dts-v1/; + +#include "s32g2.dtsi" + +/ { + model = "NXP S32G2 Reference Design Board 2 (S32G-VNP-RDB2)"; + compatible = "nxp,s32g274a-rdb2", "nxp,s32g2"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + /* 4GiB RAM */ + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0 0x80000000>, + <0x8 0x80000000 0 0x80000000>; + }; +}; + +/* UART (J2) to Micro USB port */ +&uart0 { + status = "okay"; +}; + +/* UART (J1) to Micro USB port */ +&uart1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index 2d5c1a348716..8bd6d7e8a474 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -210,7 +210,7 @@ }; }; - cluster0_opp: opp_table0 { + cluster0_opp: opp-table-0 { compatible = "operating-points-v2"; opp-shared; @@ -245,7 +245,7 @@ }; }; - cluster1_opp: opp_table1 { + cluster1_opp: opp-table-1 { compatible = "operating-points-v2"; opp-shared; @@ -1087,7 +1087,7 @@ }; watchdog0: watchdog@e8a06000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xe8a06000 0x0 0x1000>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; clocks = <&crg_ctrl HI3660_OSC32K>, @@ -1096,7 +1096,7 @@ }; watchdog1: watchdog@e8a07000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xe8a07000 0x0 0x1000>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; clocks = <&crg_ctrl HI3660_OSC32K>, diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts index d8abf442ee7e..7c32f5fd5cc5 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts @@ -12,6 +12,7 @@ #include "hi3670.dtsi" #include "hikey970-pinctrl.dtsi" +#include "hikey970-pmic.dtsi" / { model = "HiKey970"; @@ -39,23 +40,6 @@ reg = <0x0 0x0 0x0 0x0>; }; - sd_1v8: regulator-1v8 { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - sd_3v3: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - wlan_en: wlan-en-1-8v { compatible = "regulator-fixed"; regulator-name = "wlan-en-regulator"; @@ -402,8 +386,8 @@ pinctrl-0 = <&sd_pmx_func &sd_clk_cfg_func &sd_cfg_func>; - vmmc-supply = <&sd_3v3>; - vqmmc-supply = <&sd_1v8>; + vmmc-supply = <&ldo16>; + vqmmc-supply = <&ldo9>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi index 20698cfd0637..636c8817df7e 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi @@ -669,7 +669,7 @@ interrupt-parent = <&gic>; interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>; clocks = <&crg_ctrl HI3670_CLK_GATE_UFSIO_REF>, - <&crg_ctrl HI3670_CLK_GATE_UFS_SUBSYS>; + <&crg_ctrl HI3670_CLK_GATE_UFS_SUBSYS>; clock-names = "ref_clk", "phy_clk"; freq-table-hz = <0 0 0 0>; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index dde9371dc545..ae0a7cfeeb47 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -193,7 +193,7 @@ }; }; - cpu_opp_table: cpu_opp_table { + cpu_opp_table: opp-table-0 { compatible = "operating-points-v2"; opp-shared; @@ -840,7 +840,7 @@ }; watchdog0: watchdog@f8005000 { - compatible = "arm,sp805-wdt", "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xf8005000 0x0 0x1000>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ao_ctrl HI6220_WDT0_PCLK>, diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi new file mode 100644 index 000000000000..970047f2dabd --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Hi6421v600 SPMI PMIC used at the HiKey970 Development Board + * + * Copyright (C) 2020, Huawei Tech. Co., Ltd. + */ + +#include <dt-bindings/spmi/spmi.h> + +/ { + spmi: spmi@fff24000 { + compatible = "hisilicon,kirin970-spmi-controller"; + #address-cells = <2>; + #size-cells = <0>; + status = "okay"; + reg = <0x0 0xfff24000 0x0 0x1000>; + hisilicon,spmi-channel = <2>; + + pmic: pmic@0 { + compatible = "hisilicon,hi6421-spmi"; + reg = <0 SPMI_USID>; + + #interrupt-cells = <2>; + interrupt-controller; + gpios = <&gpio28 0 0>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + ldo3: ldo3 { /* HDMI */ + regulator-name = "ldo3"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2000000>; + regulator-boot-on; + }; + + ldo4: ldo4 { /* 40 PIN */ + regulator-name = "ldo4"; + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <1900000>; + regulator-boot-on; + }; + + ldo9: ldo9 { /* SDCARD I/O */ + regulator-name = "ldo9"; + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo15: ldo15 { /* UFS */ + regulator-name = "ldo15"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo16: ldo16 { /* SD */ + regulator-name = "ldo16"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + }; + + ldo17: ldo17 { /* USB HUB */ + regulator-name = "ldo17"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + + ldo33: ldo33 { /* PEX8606 */ + regulator-name = "ldo33"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + + ldo34: ldo34 { /* GPS AUX IN VDD */ + regulator-name = "ldo34"; + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index c686a8dd3ca5..1c794cdcb8e6 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7-emmc.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-turris-mox.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-uDPU.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-mochabin.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-clearfog-gt-8k.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb diff --git a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts new file mode 100644 index 000000000000..f3b0d57a24a3 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts @@ -0,0 +1,458 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree file for Globalscale MOCHAbin + * Copyright (C) 2019 Globalscale technologies, Inc. + * Copyright (C) 2021 Sartura Ltd. + * + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "armada-7040.dtsi" + +/ { + model = "Globalscale MOCHAbin"; + compatible = "globalscale,mochabin", "marvell,armada7040", + "marvell,armada-ap806-quad", "marvell,armada-ap806"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + ethernet0 = &cp0_eth0; + ethernet1 = &cp0_eth1; + ethernet2 = &cp0_eth2; + ethernet3 = &swport1; + ethernet4 = &swport2; + ethernet5 = &swport3; + ethernet6 = &swport4; + }; + + /* SFP+ 10G */ + sfp_eth0: sfp-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&cp0_i2c1>; + los-gpio = <&sfp_gpio 3 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&sfp_gpio 2 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&sfp_gpio 1 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>; + }; + + /* SFP 1G */ + sfp_eth2: sfp-eth2 { + compatible = "sff,sfp"; + i2c-bus = <&cp0_i2c0>; + los-gpio = <&sfp_gpio 7 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&sfp_gpio 6 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&sfp_gpio 5 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>; + }; +}; + +/* microUSB UART console */ +&uart0 { + status = "okay"; + + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; +}; + +/* eMMC */ +&ap_sdhci0 { + status = "okay"; + + bus-width = <4>; + non-removable; + /delete-property/ marvell,xenon-phy-slow-mode; + no-1-8-v; +}; + +&cp0_pinctrl { + cp0_uart0_pins: cp0-uart0-pins { + marvell,pins = "mpp6", "mpp7"; + marvell,function = "uart0"; + }; + + cp0_spi0_pins: cp0-spi0-pins { + marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59"; + marvell,function = "spi0"; + }; + + cp0_spi1_pins: cp0-spi1-pins { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + + cp0_i2c0_pins: cp0-i2c0-pins { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + + cp0_i2c1_pins: cp0-i2c1-pins { + marvell,pins = "mpp2", "mpp3"; + marvell,function = "i2c1"; + }; + + pca9554_int_pins: pca9554-int-pins { + marvell,pins = "mpp27"; + marvell,function = "gpio"; + }; + + cp0_rgmii1_pins: cp0-rgmii1-pins { + marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47", "mpp48", "mpp49", + "mpp50", "mpp51", "mpp52", "mpp53", "mpp54", "mpp55"; + marvell,function = "ge1"; + }; + + is31_sdb_pins: is31-sdb-pins { + marvell,pins = "mpp30"; + marvell,function = "gpio"; + }; + + cp0_pcie_reset_pins: cp0-pcie-reset-pins { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; + + cp0_pcie_clkreq_pins: cp0-pcie-clkreq-pins { + marvell,pins = "mpp5"; + marvell,function = "pcie1"; + }; + + cp0_switch_pins: cp0-switch-pins { + marvell,pins = "mpp0", "mpp1"; + marvell,function = "gpio"; + }; + + cp0_phy_pins: cp0-phy-pins { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; +}; + +/* mikroBUS UART */ +&cp0_uart0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&cp0_uart0_pins>; +}; + +/* mikroBUS SPI */ +&cp0_spi0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&cp0_spi0_pins>; +}; + +/* SPI-NOR */ +&cp0_spi1{ + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&cp0_spi1_pins>; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "firmware"; + reg = <0x0 0x3e0000>; + read-only; + }; + + partition@3e0000 { + label = "hw-info"; + reg = <0x3e0000 0x10000>; + read-only; + }; + + partition@3f0000 { + label = "u-boot-env"; + reg = <0x3f0000 0x10000>; + }; + }; + }; +}; + +/* mikroBUS, 1G SFP and GPIO expander */ +&cp0_i2c0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c0_pins>; + clock-frequency = <100000>; + + sfp_gpio: pca9554@39 { + compatible = "nxp,pca9554"; + pinctrl-names = "default"; + pinctrl-0 = <&pca9554_int_pins>; + reg = <0x39>; + + interrupt-parent = <&cp0_gpio1>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + gpio-controller; + #gpio-cells = <2>; + + /* + * IO0_0: SFP+_TX_FAULT + * IO0_1: SFP+_TX_DISABLE + * IO0_2: SFP+_PRSNT + * IO0_3: SFP+_LOSS + * IO0_4: SFP_TX_FAULT + * IO0_5: SFP_TX_DISABLE + * IO0_6: SFP_PRSNT + * IO0_7: SFP_LOSS + */ + }; +}; + +/* IS31FL3199, mini-PCIe and 10G SFP+ */ +&cp0_i2c1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c1_pins>; + clock-frequency = <100000>; + + leds@64 { + compatible = "issi,is31fl3199"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&is31_sdb_pins>; + shutdown-gpios = <&cp0_gpio1 30 GPIO_ACTIVE_HIGH>; + reg = <0x64>; + + led1_red: led@1 { + label = "red:led1"; + reg = <1>; + led-max-microamp = <20000>; + }; + + led1_green: led@2 { + label = "green:led1"; + reg = <2>; + }; + + led1_blue: led@3 { + label = "blue:led1"; + reg = <3>; + }; + + led2_red: led@4 { + label = "red:led2"; + reg = <4>; + }; + + led2_green: led@5 { + label = "green:led2"; + reg = <5>; + }; + + led2_blue: led@6 { + label = "blue:led2"; + reg = <6>; + }; + + led3_red: led@7 { + label = "red:led3"; + reg = <7>; + }; + + led3_green: led@8 { + label = "green:led3"; + reg = <8>; + }; + + led3_blue: led@9 { + label = "blue:led3"; + reg = <9>; + }; + }; +}; + +&cp0_mdio { + status = "okay"; + + /* 88E1512 PHY */ + eth2phy: ethernet-phy@1 { + reg = <1>; + sfp = <&sfp_eth2>; + + pinctrl-names = "default"; + pinctrl-0 = <&cp0_phy_pins>; + reset-gpios = <&cp0_gpio1 12 GPIO_ACTIVE_LOW>; + }; + + /* 88E6141 Topaz switch */ + switch: switch@3 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + pinctrl-names = "default"; + pinctrl-0 = <&cp0_switch_pins>; + reset-gpios = <&cp0_gpio1 0 GPIO_ACTIVE_LOW>; + + interrupt-parent = <&cp0_gpio1>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + swport1: port@1 { + reg = <1>; + label = "lan0"; + phy-handle = <&swphy1>; + }; + + swport2: port@2 { + reg = <2>; + label = "lan1"; + phy-handle = <&swphy2>; + }; + + swport3: port@3 { + reg = <3>; + label = "lan2"; + phy-handle = <&swphy3>; + }; + + swport4: port@4 { + reg = <4>; + label = "lan3"; + phy-handle = <&swphy4>; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&cp0_eth1>; + phy-mode = "2500base-x"; + managed = "in-band-status"; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + swphy1: swphy1@17 { + reg = <17>; + }; + + swphy2: swphy2@18 { + reg = <18>; + }; + + swphy3: swphy3@19 { + reg = <19>; + }; + + swphy4: swphy4@20 { + reg = <20>; + }; + }; + }; +}; + +&cp0_ethernet { + status = "okay"; +}; + +/* 10G SFP+ */ +&cp0_eth0 { + status = "okay"; + + phy-mode = "10gbase-r"; + phys = <&cp0_comphy4 0>; + managed = "in-band-status"; + sfp = <&sfp_eth0>; +}; + +/* Topaz switch uplink */ +&cp0_eth1 { + status = "okay"; + + phy-mode = "2500base-x"; + phys = <&cp0_comphy0 1>; + + fixed-link { + speed = <2500>; + full-duplex; + }; +}; + +/* 1G SFP or 1G RJ45 */ +&cp0_eth2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&cp0_rgmii1_pins>; + + phy = <ð2phy>; + phy-mode = "rgmii-id"; +}; + +&cp0_utmi { + status = "okay"; +}; + +/* SMSC USB5434B hub */ +&cp0_usb3_0 { + status = "okay"; + + phys = <&cp0_comphy1 0>, <&cp0_utmi0>; + phy-names = "cp0-usb3h0-comphy", "utmi"; +}; + +/* miniPCI-E USB */ +&cp0_usb3_1 { + status = "okay"; +}; + +&cp0_sata0 { + status = "okay"; + + /* 7 + 12 SATA connector (J24) */ + sata-port@0 { + phys = <&cp0_comphy2 0>; + phy-names = "cp0-sata0-0-phy"; + }; + + /* M.2-2250 B-key (J39) */ + sata-port@1 { + phys = <&cp0_comphy3 1>; + phy-names = "cp0-sata0-1-phy"; + }; +}; + +/* miniPCI-E (J5) */ +&cp0_pcie2 { + status = "okay"; + + pinctrl-names = "default", "clkreq"; + pinctrl-0 = <&cp0_pcie_reset_pins>; + pinctrl-1 = <&cp0_pcie_clkreq_pins>; + phys = <&cp0_comphy5 2>; + phy-names = "cp0-pcie2-x1-phy"; + reset-gpios = <&cp0_gpio1 9 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi index a9cca9c146fd..de16c0d80c30 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi @@ -915,64 +915,67 @@ }; }; - pcie: pcie@11700000 { + pcie1: pcie@112ff000 { compatible = "mediatek,mt2712-pcie"; device_type = "pci"; - reg = <0 0x11700000 0 0x1000>, - <0 0x112ff000 0 0x1000>; - reg-names = "port0", "port1"; + reg = <0 0x112ff000 0 0x1000>; + reg-names = "port1"; + linux,pci-domain = <1>; #address-cells = <3>; #size-cells = <2>; - interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>, - <&topckgen CLK_TOP_PE2_MAC_P1_SEL>, - <&pericfg CLK_PERI_PCIE0>, + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pcie_irq"; + clocks = <&topckgen CLK_TOP_PE2_MAC_P1_SEL>, <&pericfg CLK_PERI_PCIE1>; - clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1"; - phys = <&u3port0 PHY_TYPE_PCIE>, <&u3port1 PHY_TYPE_PCIE>; - phy-names = "pcie-phy0", "pcie-phy1"; + clock-names = "sys_ck1", "ahb_ck1"; + phys = <&u3port1 PHY_TYPE_PCIE>; + phy-names = "pcie-phy1"; bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + ranges = <0x82000000 0 0x11400000 0x0 0x11400000 0 0x300000>; + status = "disabled"; - pcie0: pcie@0,0 { - device_type = "pci"; - status = "disabled"; - reg = <0x0000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc0 0>, - <0 0 0 2 &pcie_intc0 1>, - <0 0 0 3 &pcie_intc0 2>, - <0 0 0 4 &pcie_intc0 3>; - pcie_intc0: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; }; + }; - pcie1: pcie@1,0 { - device_type = "pci"; - status = "disabled"; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; + pcie0: pcie@11700000 { + compatible = "mediatek,mt2712-pcie"; + device_type = "pci"; + reg = <0 0x11700000 0 0x1000>; + reg-names = "port0"; + linux,pci-domain = <0>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pcie_irq"; + clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>, + <&pericfg CLK_PERI_PCIE0>; + clock-names = "sys_ck0", "ahb_ck0"; + phys = <&u3port0 PHY_TYPE_PCIE>; + phy-names = "pcie-phy0"; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + status = "disabled"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc1 0>, - <0 0 0 2 &pcie_intc1 1>, - <0 0 0 3 &pcie_intc1 2>, - <0 0 0 4 &pcie_intc1 3>; - pcie_intc1: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt6358.dtsi b/arch/arm64/boot/dts/mediatek/mt6358.dtsi index fa159b20379e..95145076b7e6 100644 --- a/arch/arm64/boot/dts/mediatek/mt6358.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt6358.dtsi @@ -13,6 +13,7 @@ mt6358codec: mt6358codec { compatible = "mediatek,mt6358-sound"; + mediatek,dmic-mode = <0>; /* two-wires */ }; mt6358regulator: mt6358regulator { diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts index 2f77dc40b9b8..2b9bf8dd14ec 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts @@ -257,18 +257,16 @@ }; }; -&pcie { +&pcie0 { pinctrl-names = "default"; - pinctrl-0 = <&pcie0_pins>, <&pcie1_pins>; + pinctrl-0 = <&pcie0_pins>; status = "okay"; +}; - pcie@0,0 { - status = "okay"; - }; - - pcie@1,0 { - status = "okay"; - }; +&pcie1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_pins>; + status = "okay"; }; &pio { diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts index f2dc850010f1..596c073d8b05 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts @@ -234,14 +234,10 @@ }; }; -&pcie { +&pcie0 { pinctrl-names = "default"; pinctrl-0 = <&pcie0_pins>; status = "okay"; - - pcie@0,0 { - status = "okay"; - }; }; &pio { diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi index 890a942ec608..6f8cb3ad1e84 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi @@ -781,75 +781,83 @@ #reset-cells = <1>; }; - pcie: pcie@1a140000 { + pciecfg: pciecfg@1a140000 { + compatible = "mediatek,generic-pciecfg", "syscon"; + reg = <0 0x1a140000 0 0x1000>; + }; + + pcie0: pcie@1a143000 { compatible = "mediatek,mt7622-pcie"; device_type = "pci"; - reg = <0 0x1a140000 0 0x1000>, - <0 0x1a143000 0 0x1000>, - <0 0x1a145000 0 0x1000>; - reg-names = "subsys", "port0", "port1"; + reg = <0 0x1a143000 0 0x1000>; + reg-names = "port0"; + linux,pci-domain = <0>; #address-cells = <3>; #size-cells = <2>; - interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "pcie_irq"; clocks = <&pciesys CLK_PCIE_P0_MAC_EN>, - <&pciesys CLK_PCIE_P1_MAC_EN>, - <&pciesys CLK_PCIE_P0_AHB_EN>, <&pciesys CLK_PCIE_P0_AHB_EN>, <&pciesys CLK_PCIE_P0_AUX_EN>, - <&pciesys CLK_PCIE_P1_AUX_EN>, <&pciesys CLK_PCIE_P0_AXI_EN>, - <&pciesys CLK_PCIE_P1_AXI_EN>, <&pciesys CLK_PCIE_P0_OBFF_EN>, - <&pciesys CLK_PCIE_P1_OBFF_EN>, - <&pciesys CLK_PCIE_P0_PIPE_EN>, - <&pciesys CLK_PCIE_P1_PIPE_EN>; - clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1", - "aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1", - "obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1"; + <&pciesys CLK_PCIE_P0_PIPE_EN>; + clock-names = "sys_ck0", "ahb_ck0", "aux_ck0", + "axi_ck0", "obff_ck0", "pipe_ck0"; + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x8000000>; status = "disabled"; - pcie0: pcie@0,0 { - reg = <0x0000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; #interrupt-cells = <1>; - ranges; - status = "disabled"; - - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc0 0>, - <0 0 0 2 &pcie_intc0 1>, - <0 0 0 3 &pcie_intc0 2>, - <0 0 0 4 &pcie_intc0 3>; - pcie_intc0: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; }; + }; - pcie1: pcie@1,0 { - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; + pcie1: pcie@1a145000 { + compatible = "mediatek,mt7622-pcie"; + device_type = "pci"; + reg = <0 0x1a145000 0 0x1000>; + reg-names = "port1"; + linux,pci-domain = <1>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "pcie_irq"; + clocks = <&pciesys CLK_PCIE_P1_MAC_EN>, + /* designer has connect RC1 with p0_ahb clock */ + <&pciesys CLK_PCIE_P0_AHB_EN>, + <&pciesys CLK_PCIE_P1_AUX_EN>, + <&pciesys CLK_PCIE_P1_AXI_EN>, + <&pciesys CLK_PCIE_P1_OBFF_EN>, + <&pciesys CLK_PCIE_P1_PIPE_EN>; + clock-names = "sys_ck1", "ahb_ck1", "aux_ck1", + "axi_ck1", "obff_ck1", "pipe_ck1"; + + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x28000000 0x0 0x28000000 0 0x8000000>; + status = "disabled"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; #interrupt-cells = <1>; - ranges; - status = "disabled"; - - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc1 0>, - <0 0 0 2 &pcie_intc1 1>, - <0 0 0 3 &pcie_intc1 2>, - <0 0 0 4 &pcie_intc1 3>; - pcie_intc1: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index d9e005ae5bb0..dee66e5f054c 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -996,6 +996,7 @@ assigned-clocks = <&topckgen CLK_TOP_MM_SEL>; assigned-clock-rates = <400000000>; #clock-cells = <1>; + #reset-cells = <1>; mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>, <&gce 1 CMDQ_THR_PRIO_HIGHEST>; mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>; @@ -1222,6 +1223,7 @@ <&mmsys CLK_MM_DSI0_DIGITAL>, <&mipi_tx0>; clock-names = "engine", "digital", "hs"; + resets = <&mmsys MT8173_MMSYS_SW0_RST_B_DISP_DSI0>; phys = <&mipi_tx0>; phy-names = "dphy"; status = "disabled"; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219-max98357a.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219-max98357a.dtsi new file mode 100644 index 000000000000..e4aeea4599f5 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219-max98357a.dtsi @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Google Kukui (and derivatives) da7219-max98357a sound card. + * + * Copyright 2019 Google LLC. + */ + +#include "mt8183-kukui-audio-da7219.dtsi" +#include "mt8183-kukui-audio-max98357a.dtsi" + +&sound { + compatible = "mediatek,mt8183_da7219_max98357"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219-rt1015p.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219-rt1015p.dtsi new file mode 100644 index 000000000000..16ce5a3612ee --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219-rt1015p.dtsi @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Google Kukui (and derivatives) da7219-rt1015p sound card. + * + * Copyright 2020 Google LLC. + */ + +#include "mt8183-kukui-audio-da7219.dtsi" +#include "mt8183-kukui-audio-rt1015p.dtsi" + +&sound { + compatible = "mediatek,mt8183_da7219_rt1015p"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi new file mode 100644 index 000000000000..2c69e7658dba --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Google Kukui (and derivatives) audio fragment for da7219. + * + * Copyright 2020 Google LLC. + */ + +&i2c5 { + da7219: da7219@1a { + pinctrl-names = "default"; + pinctrl-0 = <&da7219_pins>; + compatible = "dlg,da7219"; + reg = <0x1a>; + interrupt-parent = <&pio>; + interrupts = <165 IRQ_TYPE_LEVEL_LOW 165 0>; + + dlg,micbias-lvl = <2600>; + dlg,mic-amp-in-sel = "diff"; + VDD-supply = <&pp1800_alw>; + VDDMIC-supply = <&pp3300_alw>; + VDDIO-supply = <&pp1800_alw>; + + status = "okay"; + + da7219_aad { + dlg,adc-1bit-rpt = <1>; + dlg,btn-avg = <4>; + dlg,btn-cfg = <50>; + dlg,mic-det-thr = <500>; + dlg,jack-ins-deb = <20>; + dlg,jack-det-rate = "32ms_64ms"; + dlg,jack-rem-deb = <1>; + + dlg,a-d-btn-thr = <0xa>; + dlg,d-b-btn-thr = <0x16>; + dlg,b-c-btn-thr = <0x21>; + dlg,c-mic-btn-thr = <0x3E>; + }; + }; +}; + +&pio { + da7219_pins: da7219_pins { + pins1 { + pinmux = <PINMUX_GPIO165__FUNC_GPIO165>; + input-enable; + bias-pull-up; + }; + }; +}; + +&sound { + mediatek,headset-codec = <&da7219>; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-max98357a.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-max98357a.dtsi new file mode 100644 index 000000000000..2b60967c0c1c --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-max98357a.dtsi @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Google Kukui (and derivatives) audio fragment for max98357a. + * + * Copyright 2020 Google LLC. + */ + +/ { + max98357a: max98357a { + compatible = "maxim,max98357a"; + sdmode-gpios = <&pio 175 0>; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-rt1015p.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-rt1015p.dtsi new file mode 100644 index 000000000000..658a764fe9ee --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-rt1015p.dtsi @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Google Kukui (and derivatives) audio fragment for rt1015p. + * + * Copyright 2020 Google LLC. + */ + +/ { + rt1015p: rt1015p { + compatible = "realtek,rt1015p"; + sdb-gpios = <&pio 175 0>; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e-max98357a.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e-max98357a.dtsi new file mode 100644 index 000000000000..260a5f561495 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e-max98357a.dtsi @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Google Kukui (and derivatives) ts3a227e-max98357a sound card. + * + * Copyright 2020 Google LLC. + */ + +#include "mt8183-kukui-audio-max98357a.dtsi" +#include "mt8183-kukui-audio-ts3a227e.dtsi" + +&sound { + compatible = "mediatek,mt8183_mt6358_ts3a227_max98357"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e-rt1015p.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e-rt1015p.dtsi new file mode 100644 index 000000000000..2f7d1fa1c90f --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e-rt1015p.dtsi @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Google Kukui (and derivatives) mt6358-ts3a227-rt1015p sound card. + * + * Copyright 2021 Google LLC. + */ + +#include "mt8183-kukui-audio-ts3a227e.dtsi" +#include "mt8183-kukui-audio-rt1015p.dtsi" + +&sound { + compatible = "mediatek,mt8183_mt6358_ts3a227_rt1015p"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi new file mode 100644 index 000000000000..0799c48ade19 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Google Kukui (and derivatives) audio fragment for ts3a227e. + * + * Copyright 2019 Google LLC. + */ + +&i2c5 { + ts3a227e: ts3a227e@3b { + pinctrl-names = "default"; + pinctrl-0 = <&ts3a227e_pins>; + compatible = "ti,ts3a227e"; + reg = <0x3b>; + interrupt-parent = <&pio>; + interrupts = <157 IRQ_TYPE_LEVEL_LOW>; + status = "okay"; + }; +}; + +&pio { + ts3a227e_pins: ts3a227e_pins { + pins1 { + pinmux = <PINMUX_GPIO157__FUNC_GPIO157>; + input-enable; + bias-pull-up; + }; + }; +}; + +&sound { + mediatek,headset-codec = <&ts3a227e>; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts index a8d6f32ade8d..1a2ec0787d3c 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts @@ -5,6 +5,7 @@ /dts-v1/; #include "mt8183-kukui-jacuzzi.dtsi" +#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi" / { model = "Google burnet board"; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts index 42ba9c00866c..0eca3ff8672a 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts @@ -5,6 +5,7 @@ /dts-v1/; #include "mt8183-kukui-jacuzzi.dtsi" +#include "mt8183-kukui-audio-da7219-max98357a.dtsi" / { model = "Google damu board"; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi index bbe6c338f465..577519a775c0 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi @@ -5,6 +5,7 @@ /dts-v1/; #include "mt8183-kukui-jacuzzi.dtsi" +#include "mt8183-kukui-audio-da7219-rt1015p.dtsi" &mt6358codec { mediatek,dmic-mode = <1>; /* one-wire */ diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts index 36d2c3b3cadf..bc2c57f0a827 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts @@ -5,6 +5,7 @@ /dts-v1/; #include "mt8183-kukui-jacuzzi-juniper.dtsi" +#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi" / { model = "Google juniper sku16 board"; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts index b3f46c16e5d7..e5bd9191e426 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts @@ -5,6 +5,7 @@ /dts-v1/; #include "mt8183-kukui-jacuzzi.dtsi" +#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi" / { model = "Google kappa board"; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts index 6f1aa692753a..8fa89db03e63 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts @@ -5,6 +5,7 @@ /dts-v1/; #include "mt8183-kukui-jacuzzi-juniper.dtsi" +#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi" / { model = "Google kenzo sku17 board"; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts index 281265f082db..89208b843b27 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts @@ -5,6 +5,7 @@ /dts-v1/; #include "mt8183-kukui-jacuzzi-willow.dtsi" +#include "mt8183-kukui-audio-da7219-max98357a.dtsi" / { model = "Google willow board sku0"; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts index 22e56bdc1ee3..c7b20441d053 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts @@ -5,6 +5,7 @@ /dts-v1/; #include "mt8183-kukui-jacuzzi-willow.dtsi" +#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi" / { model = "Google willow board sku1"; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts index 20eb0dc68f09..89a139a0ee44 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts @@ -5,6 +5,7 @@ /dts-v1/; #include "mt8183-kukui-kakadu.dtsi" +#include "mt8183-kukui-audio-da7219-rt1015p.dtsi" / { model = "MediaTek kakadu board"; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi index 3aa79403c0c2..06f8c80bf553 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi @@ -5,6 +5,7 @@ /dts-v1/; #include "mt8183-kukui.dtsi" +#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi" / { ppvarn_lcd: ppvarn-lcd { diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi index 30c183c96a54..a7b0cb3ff7b0 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi @@ -4,6 +4,7 @@ */ #include "mt8183-kukui.dtsi" +#include "mt8183-kukui-audio-max98357a.dtsi" / { ppvarn_lcd: ppvarn-lcd { @@ -345,3 +346,7 @@ &qca_wifi { qcom,ath10k-calibration-variant = "LE_Krane"; }; + +&sound { + compatible = "mediatek,mt8183_mt6358_ts3a227_max98357"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi index 8e9cf36a9a41..b42d81d26d72 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi @@ -115,12 +115,18 @@ }; }; - max98357a: codec0 { - compatible = "maxim,max98357a"; - sdmode-gpios = <&pio 175 0>; + sound: mt8183-sound { + mediatek,platform = <&afe>; + pinctrl-names = "default", + "aud_tdm_out_on", + "aud_tdm_out_off"; + pinctrl-0 = <&aud_pins_default>; + pinctrl-1 = <&aud_pins_tdm_out_on>; + pinctrl-2 = <&aud_pins_tdm_out_off>; + status = "okay"; }; - btsco: codec1 { + btsco: bt-sco { compatible = "linux,bt-sco"; }; @@ -215,6 +221,11 @@ }; }; +&afe { + i2s3-share = "I2S2"; + i2s0-share = "I2S5"; +}; + &auxadc { status = "okay"; }; @@ -402,6 +413,54 @@ }; &pio { + aud_pins_default: audiopins { + pins_bus { + pinmux = <PINMUX_GPIO97__FUNC_I2S2_MCK>, + <PINMUX_GPIO98__FUNC_I2S2_BCK>, + <PINMUX_GPIO101__FUNC_I2S2_LRCK>, + <PINMUX_GPIO102__FUNC_I2S2_DI>, + <PINMUX_GPIO3__FUNC_I2S3_DO>, /*i2s to da7219/max98357*/ + <PINMUX_GPIO89__FUNC_I2S5_BCK>, + <PINMUX_GPIO90__FUNC_I2S5_LRCK>, + <PINMUX_GPIO91__FUNC_I2S5_DO>, + <PINMUX_GPIO174__FUNC_I2S0_DI>, /*i2s to wifi/bt*/ + <PINMUX_GPIO136__FUNC_AUD_CLK_MOSI>, + <PINMUX_GPIO137__FUNC_AUD_SYNC_MOSI>, + <PINMUX_GPIO138__FUNC_AUD_DAT_MOSI0>, + <PINMUX_GPIO139__FUNC_AUD_DAT_MOSI1>, + <PINMUX_GPIO140__FUNC_AUD_CLK_MISO>, + <PINMUX_GPIO141__FUNC_AUD_SYNC_MISO>, + <PINMUX_GPIO142__FUNC_AUD_DAT_MISO0>, + <PINMUX_GPIO143__FUNC_AUD_DAT_MISO1>; /*mtkaif3.0*/ + }; + }; + + aud_pins_tdm_out_on: audiotdmouton { + pins_bus { + pinmux = <PINMUX_GPIO169__FUNC_TDM_BCK_2ND>, + <PINMUX_GPIO170__FUNC_TDM_LRCK_2ND>, + <PINMUX_GPIO171__FUNC_TDM_DATA0_2ND>, + <PINMUX_GPIO172__FUNC_TDM_DATA1_2ND>, + <PINMUX_GPIO173__FUNC_TDM_DATA2_2ND>, + <PINMUX_GPIO10__FUNC_TDM_DATA3>; /*8ch-i2s to it6505*/ + drive-strength = <MTK_DRIVE_6mA>; + }; + }; + + aud_pins_tdm_out_off: audiotdmoutoff { + pins_bus { + pinmux = <PINMUX_GPIO169__FUNC_GPIO169>, + <PINMUX_GPIO170__FUNC_GPIO170>, + <PINMUX_GPIO171__FUNC_GPIO171>, + <PINMUX_GPIO172__FUNC_GPIO172>, + <PINMUX_GPIO173__FUNC_GPIO173>, + <PINMUX_GPIO10__FUNC_GPIO10>; + input-enable; + bias-pull-down; + drive-strength = <MTK_DRIVE_2mA>; + }; + }; + bt_pins: bt-pins { pins_bt_en { pinmux = <PINMUX_GPIO120__FUNC_GPIO120>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 409cf827970c..ba4584faca5a 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -11,7 +11,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/memory/mt8183-larb-port.h> #include <dt-bindings/power/mt8183-power.h> -#include <dt-bindings/reset-controller/mt8183-resets.h> +#include <dt-bindings/reset/mt8183-resets.h> #include <dt-bindings/phy/phy.h> #include <dt-bindings/thermal/thermal.h> #include <dt-bindings/pinctrl/mt8183-pinfunc.h> @@ -1115,10 +1115,102 @@ }; }; - audiosys: syscon@11220000 { + audiosys: audio-controller@11220000 { compatible = "mediatek,mt8183-audiosys", "syscon"; reg = <0 0x11220000 0 0x1000>; #clock-cells = <1>; + afe: mt8183-afe-pcm { + compatible = "mediatek,mt8183-audio"; + interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>; + resets = <&watchdog MT8183_TOPRGU_AUDIO_SW_RST>; + reset-names = "audiosys"; + power-domains = + <&spm MT8183_POWER_DOMAIN_AUDIO>; + clocks = <&audiosys CLK_AUDIO_AFE>, + <&audiosys CLK_AUDIO_DAC>, + <&audiosys CLK_AUDIO_DAC_PREDIS>, + <&audiosys CLK_AUDIO_ADC>, + <&audiosys CLK_AUDIO_PDN_ADDA6_ADC>, + <&audiosys CLK_AUDIO_22M>, + <&audiosys CLK_AUDIO_24M>, + <&audiosys CLK_AUDIO_APLL_TUNER>, + <&audiosys CLK_AUDIO_APLL2_TUNER>, + <&audiosys CLK_AUDIO_I2S1>, + <&audiosys CLK_AUDIO_I2S2>, + <&audiosys CLK_AUDIO_I2S3>, + <&audiosys CLK_AUDIO_I2S4>, + <&audiosys CLK_AUDIO_TDM>, + <&audiosys CLK_AUDIO_TML>, + <&infracfg CLK_INFRA_AUDIO>, + <&infracfg CLK_INFRA_AUDIO_26M_BCLK>, + <&topckgen CLK_TOP_MUX_AUDIO>, + <&topckgen CLK_TOP_MUX_AUD_INTBUS>, + <&topckgen CLK_TOP_SYSPLL_D2_D4>, + <&topckgen CLK_TOP_MUX_AUD_1>, + <&topckgen CLK_TOP_APLL1_CK>, + <&topckgen CLK_TOP_MUX_AUD_2>, + <&topckgen CLK_TOP_APLL2_CK>, + <&topckgen CLK_TOP_MUX_AUD_ENG1>, + <&topckgen CLK_TOP_APLL1_D8>, + <&topckgen CLK_TOP_MUX_AUD_ENG2>, + <&topckgen CLK_TOP_APLL2_D8>, + <&topckgen CLK_TOP_MUX_APLL_I2S0>, + <&topckgen CLK_TOP_MUX_APLL_I2S1>, + <&topckgen CLK_TOP_MUX_APLL_I2S2>, + <&topckgen CLK_TOP_MUX_APLL_I2S3>, + <&topckgen CLK_TOP_MUX_APLL_I2S4>, + <&topckgen CLK_TOP_MUX_APLL_I2S5>, + <&topckgen CLK_TOP_APLL12_DIV0>, + <&topckgen CLK_TOP_APLL12_DIV1>, + <&topckgen CLK_TOP_APLL12_DIV2>, + <&topckgen CLK_TOP_APLL12_DIV3>, + <&topckgen CLK_TOP_APLL12_DIV4>, + <&topckgen CLK_TOP_APLL12_DIVB>, + /*<&topckgen CLK_TOP_APLL12_DIV5>,*/ + <&clk26m>; + clock-names = "aud_afe_clk", + "aud_dac_clk", + "aud_dac_predis_clk", + "aud_adc_clk", + "aud_adc_adda6_clk", + "aud_apll22m_clk", + "aud_apll24m_clk", + "aud_apll1_tuner_clk", + "aud_apll2_tuner_clk", + "aud_i2s1_bclk_sw", + "aud_i2s2_bclk_sw", + "aud_i2s3_bclk_sw", + "aud_i2s4_bclk_sw", + "aud_tdm_clk", + "aud_tml_clk", + "aud_infra_clk", + "mtkaif_26m_clk", + "top_mux_audio", + "top_mux_aud_intbus", + "top_syspll_d2_d4", + "top_mux_aud_1", + "top_apll1_ck", + "top_mux_aud_2", + "top_apll2_ck", + "top_mux_aud_eng1", + "top_apll1_d8", + "top_mux_aud_eng2", + "top_apll2_d8", + "top_i2s0_m_sel", + "top_i2s1_m_sel", + "top_i2s2_m_sel", + "top_i2s3_m_sel", + "top_i2s4_m_sel", + "top_i2s5_m_sel", + "top_apll12_div0", + "top_apll12_div1", + "top_apll12_div2", + "top_apll12_div3", + "top_apll12_div4", + "top_apll12_divb", + /*"top_apll12_div5",*/ + "top_clk26m_clk"; + }; }; mmc0: mmc@11230000 { @@ -1227,6 +1319,7 @@ compatible = "mediatek,mt8183-mmsys", "syscon"; reg = <0 0x14000000 0 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>, <&gce 1 CMDQ_THR_PRIO_HIGHEST>; mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>; @@ -1341,11 +1434,11 @@ reg = <0 0x14014000 0 0x1000>; interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_LOW>; power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; - mediatek,syscon-dsi = <&mmsys 0x140>; clocks = <&mmsys CLK_MM_DSI0_MM>, <&mmsys CLK_MM_DSI0_IF>, <&mipi_tx0>; clock-names = "engine", "digital", "hs"; + resets = <&mmsys MT8183_MMSYS_SW0_RST_B_DISP_DSI0>; phys = <&mipi_tx0>; phy-names = "dphy"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi index 9757138a8bbd..c7c7d4e017ae 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi @@ -5,6 +5,7 @@ */ /dts-v1/; +#include <dt-bindings/clock/mt8192-clk.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pinctrl/mt8192-pinfunc.h> @@ -257,6 +258,24 @@ }; }; + topckgen: syscon@10000000 { + compatible = "mediatek,mt8192-topckgen", "syscon"; + reg = <0 0x10000000 0 0x1000>; + #clock-cells = <1>; + }; + + infracfg: syscon@10001000 { + compatible = "mediatek,mt8192-infracfg", "syscon"; + reg = <0 0x10001000 0 0x1000>; + #clock-cells = <1>; + }; + + pericfg: syscon@10003000 { + compatible = "mediatek,mt8192-pericfg", "syscon"; + reg = <0 0x10003000 0 0x1000>; + #clock-cells = <1>; + }; + pio: pinctrl@10005000 { compatible = "mediatek,mt8192-pinctrl"; reg = <0 0x10005000 0 0x1000>, @@ -282,6 +301,12 @@ #interrupt-cells = <2>; }; + apmixedsys: syscon@1000c000 { + compatible = "mediatek,mt8192-apmixedsys", "syscon"; + reg = <0 0x1000c000 0 0x1000>; + #clock-cells = <1>; + }; + systimer: timer@10017000 { compatible = "mediatek,mt8192-timer", "mediatek,mt6765-timer"; @@ -291,6 +316,12 @@ clock-names = "clk13m"; }; + scp_adsp: clock-controller@10720000 { + compatible = "mediatek,mt8192-scp_adsp"; + reg = <0 0x10720000 0 0x1000>; + #clock-cells = <1>; + }; + uart0: serial@11002000 { compatible = "mediatek,mt8192-uart", "mediatek,mt6577-uart"; @@ -311,6 +342,12 @@ status = "disabled"; }; + imp_iic_wrap_c: clock-controller@11007000 { + compatible = "mediatek,mt8192-imp_iic_wrap_c"; + reg = <0 0x11007000 0 0x1000>; + #clock-cells = <1>; + }; + spi0: spi@1100a000 { compatible = "mediatek,mt8192-spi", "mediatek,mt6765-spi"; @@ -436,6 +473,12 @@ status = "disable"; }; + audsys: clock-controller@11210000 { + compatible = "mediatek,mt8192-audsys", "syscon"; + reg = <0 0x11210000 0 0x1000>; + #clock-cells = <1>; + }; + i2c3: i2c3@11cb0000 { compatible = "mediatek,mt8192-i2c"; reg = <0 0x11cb0000 0 0x1000>, @@ -449,6 +492,12 @@ status = "disabled"; }; + imp_iic_wrap_e: clock-controller@11cb1000 { + compatible = "mediatek,mt8192-imp_iic_wrap_e"; + reg = <0 0x11cb1000 0 0x1000>; + #clock-cells = <1>; + }; + i2c7: i2c7@11d00000 { compatible = "mediatek,mt8192-i2c"; reg = <0 0x11d00000 0 0x1000>, @@ -488,6 +537,12 @@ status = "disabled"; }; + imp_iic_wrap_s: clock-controller@11d03000 { + compatible = "mediatek,mt8192-imp_iic_wrap_s"; + reg = <0 0x11d03000 0 0x1000>; + #clock-cells = <1>; + }; + i2c1: i2c1@11d20000 { compatible = "mediatek,mt8192-i2c"; reg = <0 0x11d20000 0 0x1000>, @@ -527,6 +582,12 @@ status = "disabled"; }; + imp_iic_wrap_ws: clock-controller@11d23000 { + compatible = "mediatek,mt8192-imp_iic_wrap_ws"; + reg = <0 0x11d23000 0 0x1000>; + #clock-cells = <1>; + }; + i2c5: i2c5@11e00000 { compatible = "mediatek,mt8192-i2c"; reg = <0 0x11e00000 0 0x1000>, @@ -540,6 +601,12 @@ status = "disabled"; }; + imp_iic_wrap_w: clock-controller@11e01000 { + compatible = "mediatek,mt8192-imp_iic_wrap_w"; + reg = <0 0x11e01000 0 0x1000>; + #clock-cells = <1>; + }; + i2c0: i2c0@11f00000 { compatible = "mediatek,mt8192-i2c"; reg = <0 0x11f00000 0 0x1000>, @@ -565,5 +632,101 @@ #size-cells = <0>; status = "disabled"; }; + + imp_iic_wrap_n: clock-controller@11f02000 { + compatible = "mediatek,mt8192-imp_iic_wrap_n"; + reg = <0 0x11f02000 0 0x1000>; + #clock-cells = <1>; + }; + + msdc_top: clock-controller@11f10000 { + compatible = "mediatek,mt8192-msdc_top"; + reg = <0 0x11f10000 0 0x1000>; + #clock-cells = <1>; + }; + + msdc: clock-controller@11f60000 { + compatible = "mediatek,mt8192-msdc"; + reg = <0 0x11f60000 0 0x1000>; + #clock-cells = <1>; + }; + + mfgcfg: clock-controller@13fbf000 { + compatible = "mediatek,mt8192-mfgcfg"; + reg = <0 0x13fbf000 0 0x1000>; + #clock-cells = <1>; + }; + + mmsys: syscon@14000000 { + compatible = "mediatek,mt8192-mmsys", "syscon"; + reg = <0 0x14000000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys: clock-controller@15020000 { + compatible = "mediatek,mt8192-imgsys"; + reg = <0 0x15020000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys2: clock-controller@15820000 { + compatible = "mediatek,mt8192-imgsys2"; + reg = <0 0x15820000 0 0x1000>; + #clock-cells = <1>; + }; + + vdecsys_soc: clock-controller@1600f000 { + compatible = "mediatek,mt8192-vdecsys_soc"; + reg = <0 0x1600f000 0 0x1000>; + #clock-cells = <1>; + }; + + vdecsys: clock-controller@1602f000 { + compatible = "mediatek,mt8192-vdecsys"; + reg = <0 0x1602f000 0 0x1000>; + #clock-cells = <1>; + }; + + vencsys: clock-controller@17000000 { + compatible = "mediatek,mt8192-vencsys"; + reg = <0 0x17000000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys: clock-controller@1a000000 { + compatible = "mediatek,mt8192-camsys"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys_rawa: clock-controller@1a04f000 { + compatible = "mediatek,mt8192-camsys_rawa"; + reg = <0 0x1a04f000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys_rawb: clock-controller@1a06f000 { + compatible = "mediatek,mt8192-camsys_rawb"; + reg = <0 0x1a06f000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys_rawc: clock-controller@1a08f000 { + compatible = "mediatek,mt8192-camsys_rawc"; + reg = <0 0x1a08f000 0 0x1000>; + #clock-cells = <1>; + }; + + ipesys: clock-controller@1b000000 { + compatible = "mediatek,mt8192-ipesys"; + reg = <0 0x1b000000 0 0x1000>; + #clock-cells = <1>; + }; + + mdpsys: clock-controller@1f000000 { + compatible = "mediatek,mt8192-mdpsys"; + reg = <0 0x1f000000 0 0x1000>; + #clock-cells = <1>; + }; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts index 6e5f8465669e..8a51751526ee 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts +++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts @@ -1021,8 +1021,6 @@ brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; - - backlight-boot-off; }; clk32k_in: clock@0 { diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi index b0bcda8cc51f..63aa3129d8fc 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -1107,7 +1107,7 @@ }; usb@7d000000 { - compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci"; + compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci"; reg = <0x0 0x7d000000 0x0 0x4000>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; @@ -1123,6 +1123,7 @@ compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy"; reg = <0x0 0x7d000000 0x0 0x4000>, <0x0 0x7d000000 0x0 0x4000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; clocks = <&tegra_car TEGRA124_CLK_USBD>, <&tegra_car TEGRA124_CLK_PLL_U>, @@ -1142,11 +1143,12 @@ nvidia,hsdiscon-level = <5>; nvidia,xcvr-hsslew = <12>; nvidia,has-utmi-pad-registers; + nvidia,pmc = <&tegra_pmc 0>; status = "disabled"; }; usb@7d004000 { - compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci"; + compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci"; reg = <0x0 0x7d004000 0x0 0x4000>; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; @@ -1162,6 +1164,7 @@ compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy"; reg = <0x0 0x7d004000 0x0 0x4000>, <0x0 0x7d000000 0x0 0x4000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; clocks = <&tegra_car TEGRA124_CLK_USB2>, <&tegra_car TEGRA124_CLK_PLL_U>, @@ -1180,11 +1183,12 @@ nvidia,hssquelch-level = <2>; nvidia,hsdiscon-level = <5>; nvidia,xcvr-hsslew = <12>; + nvidia,pmc = <&tegra_pmc 1>; status = "disabled"; }; usb@7d008000 { - compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci"; + compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci"; reg = <0x0 0x7d008000 0x0 0x4000>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; @@ -1200,6 +1204,7 @@ compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy"; reg = <0x0 0x7d008000 0x0 0x4000>, <0x0 0x7d000000 0x0 0x4000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; clocks = <&tegra_car TEGRA124_CLK_USB3>, <&tegra_car TEGRA124_CLK_PLL_U>, @@ -1218,6 +1223,7 @@ nvidia,hssquelch-level = <2>; nvidia,hsdiscon-level = <5>; nvidia,xcvr-hsslew = <12>; + nvidia,pmc = <&tegra_pmc 2>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index 74c1a5df3fdb..52fa258533e6 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -275,6 +275,542 @@ remote-endpoint = <&dspk2_cif_ep>; }; }; + + xbar_sfc1_in_port: port@20 { + reg = <0x20>; + + xbar_sfc1_in_ep: endpoint { + remote-endpoint = <&sfc1_cif_in_ep>; + }; + }; + + port@21 { + reg = <0x21>; + + xbar_sfc1_out_ep: endpoint { + remote-endpoint = <&sfc1_cif_out_ep>; + }; + }; + + xbar_sfc2_in_port: port@22 { + reg = <0x22>; + + xbar_sfc2_in_ep: endpoint { + remote-endpoint = <&sfc2_cif_in_ep>; + }; + }; + + port@23 { + reg = <0x23>; + + xbar_sfc2_out_ep: endpoint { + remote-endpoint = <&sfc2_cif_out_ep>; + }; + }; + + xbar_sfc3_in_port: port@24 { + reg = <0x24>; + + xbar_sfc3_in_ep: endpoint { + remote-endpoint = <&sfc3_cif_in_ep>; + }; + }; + + port@25 { + reg = <0x25>; + + xbar_sfc3_out_ep: endpoint { + remote-endpoint = <&sfc3_cif_out_ep>; + }; + }; + + xbar_sfc4_in_port: port@26 { + reg = <0x26>; + + xbar_sfc4_in_ep: endpoint { + remote-endpoint = <&sfc4_cif_in_ep>; + }; + }; + + port@27 { + reg = <0x27>; + + xbar_sfc4_out_ep: endpoint { + remote-endpoint = <&sfc4_cif_out_ep>; + }; + }; + + xbar_mvc1_in_port: port@28 { + reg = <0x28>; + + xbar_mvc1_in_ep: endpoint { + remote-endpoint = <&mvc1_cif_in_ep>; + }; + }; + + port@29 { + reg = <0x29>; + + xbar_mvc1_out_ep: endpoint { + remote-endpoint = <&mvc1_cif_out_ep>; + }; + }; + + xbar_mvc2_in_port: port@2a { + reg = <0x2a>; + + xbar_mvc2_in_ep: endpoint { + remote-endpoint = <&mvc2_cif_in_ep>; + }; + }; + + port@2b { + reg = <0x2b>; + + xbar_mvc2_out_ep: endpoint { + remote-endpoint = <&mvc2_cif_out_ep>; + }; + }; + + xbar_amx1_in1_port: port@2c { + reg = <0x2c>; + + xbar_amx1_in1_ep: endpoint { + remote-endpoint = <&amx1_in1_ep>; + }; + }; + + xbar_amx1_in2_port: port@2d { + reg = <0x2d>; + + xbar_amx1_in2_ep: endpoint { + remote-endpoint = <&amx1_in2_ep>; + }; + }; + + xbar_amx1_in3_port: port@2e { + reg = <0x2e>; + + xbar_amx1_in3_ep: endpoint { + remote-endpoint = <&amx1_in3_ep>; + }; + }; + + xbar_amx1_in4_port: port@2f { + reg = <0x2f>; + + xbar_amx1_in4_ep: endpoint { + remote-endpoint = <&amx1_in4_ep>; + }; + }; + + port@30 { + reg = <0x30>; + + xbar_amx1_out_ep: endpoint { + remote-endpoint = <&amx1_out_ep>; + }; + }; + + xbar_amx2_in1_port: port@31 { + reg = <0x31>; + + xbar_amx2_in1_ep: endpoint { + remote-endpoint = <&amx2_in1_ep>; + }; + }; + + xbar_amx2_in2_port: port@32 { + reg = <0x32>; + + xbar_amx2_in2_ep: endpoint { + remote-endpoint = <&amx2_in2_ep>; + }; + }; + + xbar_amx2_in3_port: port@33 { + reg = <0x33>; + + xbar_amx2_in3_ep: endpoint { + remote-endpoint = <&amx2_in3_ep>; + }; + }; + + xbar_amx2_in4_port: port@34 { + reg = <0x34>; + + xbar_amx2_in4_ep: endpoint { + remote-endpoint = <&amx2_in4_ep>; + }; + }; + + port@35 { + reg = <0x35>; + + xbar_amx2_out_ep: endpoint { + remote-endpoint = <&amx2_out_ep>; + }; + }; + + xbar_amx3_in1_port: port@36 { + reg = <0x36>; + + xbar_amx3_in1_ep: endpoint { + remote-endpoint = <&amx3_in1_ep>; + }; + }; + + xbar_amx3_in2_port: port@37 { + reg = <0x37>; + + xbar_amx3_in2_ep: endpoint { + remote-endpoint = <&amx3_in2_ep>; + }; + }; + + xbar_amx3_in3_port: port@38 { + reg = <0x38>; + + xbar_amx3_in3_ep: endpoint { + remote-endpoint = <&amx3_in3_ep>; + }; + }; + + xbar_amx3_in4_port: port@39 { + reg = <0x39>; + + xbar_amx3_in4_ep: endpoint { + remote-endpoint = <&amx3_in4_ep>; + }; + }; + + port@3a { + reg = <0x3a>; + + xbar_amx3_out_ep: endpoint { + remote-endpoint = <&amx3_out_ep>; + }; + }; + + xbar_amx4_in1_port: port@3b { + reg = <0x3b>; + + xbar_amx4_in1_ep: endpoint { + remote-endpoint = <&amx4_in1_ep>; + }; + }; + + xbar_amx4_in2_port: port@3c { + reg = <0x3c>; + + xbar_amx4_in2_ep: endpoint { + remote-endpoint = <&amx4_in2_ep>; + }; + }; + + xbar_amx4_in3_port: port@3d { + reg = <0x3d>; + + xbar_amx4_in3_ep: endpoint { + remote-endpoint = <&amx4_in3_ep>; + }; + }; + + xbar_amx4_in4_port: port@3e { + reg = <0x3e>; + + xbar_amx4_in4_ep: endpoint { + remote-endpoint = <&amx4_in4_ep>; + }; + }; + + port@3f { + reg = <0x3f>; + + xbar_amx4_out_ep: endpoint { + remote-endpoint = <&amx4_out_ep>; + }; + }; + + xbar_adx1_in_port: port@40 { + reg = <0x40>; + + xbar_adx1_in_ep: endpoint { + remote-endpoint = <&adx1_in_ep>; + }; + }; + + port@41 { + reg = <0x41>; + + xbar_adx1_out1_ep: endpoint { + remote-endpoint = <&adx1_out1_ep>; + }; + }; + + port@42 { + reg = <0x42>; + + xbar_adx1_out2_ep: endpoint { + remote-endpoint = <&adx1_out2_ep>; + }; + }; + + port@43 { + reg = <0x43>; + + xbar_adx1_out3_ep: endpoint { + remote-endpoint = <&adx1_out3_ep>; + }; + }; + + port@44 { + reg = <0x44>; + + xbar_adx1_out4_ep: endpoint { + remote-endpoint = <&adx1_out4_ep>; + }; + }; + + xbar_adx2_in_port: port@45 { + reg = <0x45>; + + xbar_adx2_in_ep: endpoint { + remote-endpoint = <&adx2_in_ep>; + }; + }; + + port@46 { + reg = <0x46>; + + xbar_adx2_out1_ep: endpoint { + remote-endpoint = <&adx2_out1_ep>; + }; + }; + + port@47 { + reg = <0x47>; + + xbar_adx2_out2_ep: endpoint { + remote-endpoint = <&adx2_out2_ep>; + }; + }; + + port@48 { + reg = <0x48>; + + xbar_adx2_out3_ep: endpoint { + remote-endpoint = <&adx2_out3_ep>; + }; + }; + + port@49 { + reg = <0x49>; + + xbar_adx2_out4_ep: endpoint { + remote-endpoint = <&adx2_out4_ep>; + }; + }; + + xbar_adx3_in_port: port@4a { + reg = <0x4a>; + + xbar_adx3_in_ep: endpoint { + remote-endpoint = <&adx3_in_ep>; + }; + }; + + port@4b { + reg = <0x4b>; + + xbar_adx3_out1_ep: endpoint { + remote-endpoint = <&adx3_out1_ep>; + }; + }; + + port@4c { + reg = <0x4c>; + + xbar_adx3_out2_ep: endpoint { + remote-endpoint = <&adx3_out2_ep>; + }; + }; + + port@4d { + reg = <0x4d>; + + xbar_adx3_out3_ep: endpoint { + remote-endpoint = <&adx3_out3_ep>; + }; + }; + + port@4e { + reg = <0x4e>; + + xbar_adx3_out4_ep: endpoint { + remote-endpoint = <&adx3_out4_ep>; + }; + }; + + xbar_adx4_in_port: port@4f { + reg = <0x4f>; + + xbar_adx4_in_ep: endpoint { + remote-endpoint = <&adx4_in_ep>; + }; + }; + + port@50 { + reg = <0x50>; + + xbar_adx4_out1_ep: endpoint { + remote-endpoint = <&adx4_out1_ep>; + }; + }; + + port@51 { + reg = <0x51>; + + xbar_adx4_out2_ep: endpoint { + remote-endpoint = <&adx4_out2_ep>; + }; + }; + + port@52 { + reg = <0x52>; + + xbar_adx4_out3_ep: endpoint { + remote-endpoint = <&adx4_out3_ep>; + }; + }; + + port@53 { + reg = <0x53>; + + xbar_adx4_out4_ep: endpoint { + remote-endpoint = <&adx4_out4_ep>; + }; + }; + + xbar_mixer_in1_port: port@54 { + reg = <0x54>; + + xbar_mixer_in1_ep: endpoint { + remote-endpoint = <&mixer_in1_ep>; + }; + }; + + xbar_mixer_in2_port: port@55 { + reg = <0x55>; + + xbar_mixer_in2_ep: endpoint { + remote-endpoint = <&mixer_in2_ep>; + }; + }; + + xbar_mixer_in3_port: port@56 { + reg = <0x56>; + + xbar_mixer_in3_ep: endpoint { + remote-endpoint = <&mixer_in3_ep>; + }; + }; + + xbar_mixer_in4_port: port@57 { + reg = <0x57>; + + xbar_mixer_in4_ep: endpoint { + remote-endpoint = <&mixer_in4_ep>; + }; + }; + + xbar_mixer_in5_port: port@58 { + reg = <0x58>; + + xbar_mixer_in5_ep: endpoint { + remote-endpoint = <&mixer_in5_ep>; + }; + }; + + xbar_mixer_in6_port: port@59 { + reg = <0x59>; + + xbar_mixer_in6_ep: endpoint { + remote-endpoint = <&mixer_in6_ep>; + }; + }; + + xbar_mixer_in7_port: port@5a { + reg = <0x5a>; + + xbar_mixer_in7_ep: endpoint { + remote-endpoint = <&mixer_in7_ep>; + }; + }; + + xbar_mixer_in8_port: port@5b { + reg = <0x5b>; + + xbar_mixer_in8_ep: endpoint { + remote-endpoint = <&mixer_in8_ep>; + }; + }; + + xbar_mixer_in9_port: port@5c { + reg = <0x5c>; + + xbar_mixer_in9_ep: endpoint { + remote-endpoint = <&mixer_in9_ep>; + }; + }; + + xbar_mixer_in10_port: port@5d { + reg = <0x5d>; + + xbar_mixer_in10_ep: endpoint { + remote-endpoint = <&mixer_in10_ep>; + }; + }; + + port@5e { + reg = <0x5e>; + + xbar_mixer_out1_ep: endpoint { + remote-endpoint = <&mixer_out1_ep>; + }; + }; + + port@5f { + reg = <0x5f>; + + xbar_mixer_out2_ep: endpoint { + remote-endpoint = <&mixer_out2_ep>; + }; + }; + + port@60 { + reg = <0x60>; + + xbar_mixer_out3_ep: endpoint { + remote-endpoint = <&mixer_out3_ep>; + }; + }; + + port@61 { + reg = <0x61>; + + xbar_mixer_out4_ep: endpoint { + remote-endpoint = <&mixer_out4_ep>; + }; + }; + + port@62 { + reg = <0x62>; + + xbar_mixer_out5_ep: endpoint { + remote-endpoint = <&mixer_out5_ep>; + }; + }; }; admaif@290f000 { @@ -726,6 +1262,679 @@ }; }; }; + + sfc@2902000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc1_in_ep>; + convert-rate = <44100>; + }; + }; + + sfc1_out_port: port@1 { + reg = <1>; + + sfc1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc1_out_ep>; + convert-rate = <48000>; + }; + }; + }; + }; + + sfc@2902200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc2_in_ep>; + }; + }; + + sfc2_out_port: port@1 { + reg = <1>; + + sfc2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc2_out_ep>; + }; + }; + }; + }; + + sfc@2902400 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc3_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc3_in_ep>; + }; + }; + + sfc3_out_port: port@1 { + reg = <1>; + + sfc3_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc3_out_ep>; + }; + }; + }; + }; + + sfc@2902600 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc4_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc4_in_ep>; + }; + }; + + sfc4_out_port: port@1 { + reg = <1>; + + sfc4_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc4_out_ep>; + }; + }; + }; + }; + + mvc@290a000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_mvc1_in_ep>; + }; + }; + + mvc1_out_port: port@1 { + reg = <1>; + + mvc1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_mvc1_out_ep>; + }; + }; + }; + }; + + mvc@290a200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_mvc2_in_ep>; + }; + }; + + mvc2_out_port: port@1 { + reg = <1>; + + mvc2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_mvc2_out_ep>; + }; + }; + }; + }; + + amx@2903000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx1_in1_ep: endpoint { + remote-endpoint = <&xbar_amx1_in1_ep>; + }; + }; + + port@1 { + reg = <1>; + + amx1_in2_ep: endpoint { + remote-endpoint = <&xbar_amx1_in2_ep>; + }; + }; + + port@2 { + reg = <2>; + + amx1_in3_ep: endpoint { + remote-endpoint = <&xbar_amx1_in3_ep>; + }; + }; + + port@3 { + reg = <3>; + + amx1_in4_ep: endpoint { + remote-endpoint = <&xbar_amx1_in4_ep>; + }; + }; + + amx1_out_port: port@4 { + reg = <4>; + + amx1_out_ep: endpoint { + remote-endpoint = <&xbar_amx1_out_ep>; + }; + }; + }; + }; + + amx@2903100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx2_in1_ep: endpoint { + remote-endpoint = <&xbar_amx2_in1_ep>; + }; + }; + + port@1 { + reg = <1>; + + amx2_in2_ep: endpoint { + remote-endpoint = <&xbar_amx2_in2_ep>; + }; + }; + + amx2_in3_port: port@2 { + reg = <2>; + + amx2_in3_ep: endpoint { + remote-endpoint = <&xbar_amx2_in3_ep>; + }; + }; + + amx2_in4_port: port@3 { + reg = <3>; + + amx2_in4_ep: endpoint { + remote-endpoint = <&xbar_amx2_in4_ep>; + }; + }; + + amx2_out_port: port@4 { + reg = <4>; + + amx2_out_ep: endpoint { + remote-endpoint = <&xbar_amx2_out_ep>; + }; + }; + }; + }; + + amx@2903200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx3_in1_ep: endpoint { + remote-endpoint = <&xbar_amx3_in1_ep>; + }; + }; + + port@1 { + reg = <1>; + + amx3_in2_ep: endpoint { + remote-endpoint = <&xbar_amx3_in2_ep>; + }; + }; + + port@2 { + reg = <2>; + + amx3_in3_ep: endpoint { + remote-endpoint = <&xbar_amx3_in3_ep>; + }; + }; + + port@3 { + reg = <3>; + + amx3_in4_ep: endpoint { + remote-endpoint = <&xbar_amx3_in4_ep>; + }; + }; + + amx3_out_port: port@4 { + reg = <4>; + + amx3_out_ep: endpoint { + remote-endpoint = <&xbar_amx3_out_ep>; + }; + }; + }; + }; + + amx@2903300 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx4_in1_ep: endpoint { + remote-endpoint = <&xbar_amx4_in1_ep>; + }; + }; + + port@1 { + reg = <1>; + + amx4_in2_ep: endpoint { + remote-endpoint = <&xbar_amx4_in2_ep>; + }; + }; + + port@2 { + reg = <2>; + + amx4_in3_ep: endpoint { + remote-endpoint = <&xbar_amx4_in3_ep>; + }; + }; + + port@3 { + reg = <3>; + + amx4_in4_ep: endpoint { + remote-endpoint = <&xbar_amx4_in4_ep>; + }; + }; + + amx4_out_port: port@4 { + reg = <4>; + + amx4_out_ep: endpoint { + remote-endpoint = <&xbar_amx4_out_ep>; + }; + }; + }; + }; + + adx@2903800 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx1_in_ep: endpoint { + remote-endpoint = <&xbar_adx1_in_ep>; + }; + }; + + adx1_out1_port: port@1 { + reg = <1>; + + adx1_out1_ep: endpoint { + remote-endpoint = <&xbar_adx1_out1_ep>; + }; + }; + + adx1_out2_port: port@2 { + reg = <2>; + + adx1_out2_ep: endpoint { + remote-endpoint = <&xbar_adx1_out2_ep>; + }; + }; + + adx1_out3_port: port@3 { + reg = <3>; + + adx1_out3_ep: endpoint { + remote-endpoint = <&xbar_adx1_out3_ep>; + }; + }; + + adx1_out4_port: port@4 { + reg = <4>; + + adx1_out4_ep: endpoint { + remote-endpoint = <&xbar_adx1_out4_ep>; + }; + }; + }; + }; + + adx@2903900 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx2_in_ep: endpoint { + remote-endpoint = <&xbar_adx2_in_ep>; + }; + }; + + adx2_out1_port: port@1 { + reg = <1>; + + adx2_out1_ep: endpoint { + remote-endpoint = <&xbar_adx2_out1_ep>; + }; + }; + + adx2_out2_port: port@2 { + reg = <2>; + + adx2_out2_ep: endpoint { + remote-endpoint = <&xbar_adx2_out2_ep>; + }; + }; + + adx2_out3_port: port@3 { + reg = <3>; + + adx2_out3_ep: endpoint { + remote-endpoint = <&xbar_adx2_out3_ep>; + }; + }; + + adx2_out4_port: port@4 { + reg = <4>; + + adx2_out4_ep: endpoint { + remote-endpoint = <&xbar_adx2_out4_ep>; + }; + }; + }; + }; + + adx@2903a00 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx3_in_ep: endpoint { + remote-endpoint = <&xbar_adx3_in_ep>; + }; + }; + + adx3_out1_port: port@1 { + reg = <1>; + + adx3_out1_ep: endpoint { + remote-endpoint = <&xbar_adx3_out1_ep>; + }; + }; + + adx3_out2_port: port@2 { + reg = <2>; + + adx3_out2_ep: endpoint { + remote-endpoint = <&xbar_adx3_out2_ep>; + }; + }; + + adx3_out3_port: port@3 { + reg = <3>; + + adx3_out3_ep: endpoint { + remote-endpoint = <&xbar_adx3_out3_ep>; + }; + }; + + adx3_out4_port: port@4 { + reg = <4>; + + adx3_out4_ep: endpoint { + remote-endpoint = <&xbar_adx3_out4_ep>; + }; + }; + }; + }; + + adx@2903b00 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx4_in_ep: endpoint { + remote-endpoint = <&xbar_adx4_in_ep>; + }; + }; + + adx4_out1_port: port@1 { + reg = <1>; + + adx4_out1_ep: endpoint { + remote-endpoint = <&xbar_adx4_out1_ep>; + }; + }; + + adx4_out2_port: port@2 { + reg = <2>; + + adx4_out2_ep: endpoint { + remote-endpoint = <&xbar_adx4_out2_ep>; + }; + }; + + adx4_out3_port: port@3 { + reg = <3>; + + adx4_out3_ep: endpoint { + remote-endpoint = <&xbar_adx4_out3_ep>; + }; + }; + + adx4_out4_port: port@4 { + reg = <4>; + + adx4_out4_ep: endpoint { + remote-endpoint = <&xbar_adx4_out4_ep>; + }; + }; + }; + }; + + amixer@290bb00 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + mixer_in1_ep: endpoint { + remote-endpoint = <&xbar_mixer_in1_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + mixer_in2_ep: endpoint { + remote-endpoint = <&xbar_mixer_in2_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + mixer_in3_ep: endpoint { + remote-endpoint = <&xbar_mixer_in3_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + mixer_in4_ep: endpoint { + remote-endpoint = <&xbar_mixer_in4_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + mixer_in5_ep: endpoint { + remote-endpoint = <&xbar_mixer_in5_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + mixer_in6_ep: endpoint { + remote-endpoint = <&xbar_mixer_in6_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + mixer_in7_ep: endpoint { + remote-endpoint = <&xbar_mixer_in7_ep>; + }; + }; + + port@7 { + reg = <0x7>; + + mixer_in8_ep: endpoint { + remote-endpoint = <&xbar_mixer_in8_ep>; + }; + }; + + port@8 { + reg = <0x8>; + + mixer_in9_ep: endpoint { + remote-endpoint = <&xbar_mixer_in9_ep>; + }; + }; + + port@9 { + reg = <0x9>; + + mixer_in10_ep: endpoint { + remote-endpoint = <&xbar_mixer_in10_ep>; + }; + }; + + mixer_out1_port: port@a { + reg = <0xa>; + + mixer_out1_ep: endpoint { + remote-endpoint = <&xbar_mixer_out1_ep>; + }; + }; + + mixer_out2_port: port@b { + reg = <0xb>; + + mixer_out2_ep: endpoint { + remote-endpoint = <&xbar_mixer_out2_ep>; + }; + }; + + mixer_out3_port: port@c { + reg = <0xc>; + + mixer_out3_ep: endpoint { + remote-endpoint = <&xbar_mixer_out3_ep>; + }; + }; + + mixer_out4_port: port@d { + reg = <0xd>; + + mixer_out4_ep: endpoint { + remote-endpoint = <&xbar_mixer_out4_ep>; + }; + }; + + mixer_out5_port: port@e { + reg = <0xe>; + + mixer_out5_ep: endpoint { + remote-endpoint = <&xbar_mixer_out5_ep>; + }; + }; + }; + }; }; }; @@ -1104,6 +2313,41 @@ <&xbar_i2s4_port>, <&xbar_i2s5_port>, <&xbar_i2s6_port>, <&xbar_dmic1_port>, <&xbar_dmic2_port>, <&xbar_dmic3_port>, <&xbar_dspk1_port>, <&xbar_dspk2_port>, + <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>, + <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>, + <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>, + <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>, + <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>, + <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>, + <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>, + <&xbar_amx3_in1_port>, <&xbar_amx3_in2_port>, + <&xbar_amx3_in3_port>, <&xbar_amx3_in4_port>, + <&xbar_amx4_in1_port>, <&xbar_amx4_in2_port>, + <&xbar_amx4_in3_port>, <&xbar_amx4_in4_port>, + <&xbar_adx1_in_port>, <&xbar_adx2_in_port>, + <&xbar_adx3_in_port>, <&xbar_adx4_in_port>, + <&xbar_mixer_in1_port>, <&xbar_mixer_in2_port>, + <&xbar_mixer_in3_port>, <&xbar_mixer_in4_port>, + <&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>, + <&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>, + <&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>, + /* HW accelerators */ + <&sfc1_out_port>, <&sfc2_out_port>, + <&sfc3_out_port>, <&sfc4_out_port>, + <&mvc1_out_port>, <&mvc2_out_port>, + <&amx1_out_port>, <&amx2_out_port>, + <&amx3_out_port>, <&amx4_out_port>, + <&adx1_out1_port>, <&adx1_out2_port>, + <&adx1_out3_port>, <&adx1_out4_port>, + <&adx2_out1_port>, <&adx2_out2_port>, + <&adx2_out3_port>, <&adx2_out4_port>, + <&adx3_out1_port>, <&adx3_out2_port>, + <&adx3_out3_port>, <&adx3_out4_port>, + <&adx4_out1_port>, <&adx4_out2_port>, + <&adx4_out3_port>, <&adx4_out4_port>, + <&mixer_out1_port>, <&mixer_out2_port>, + <&mixer_out3_port>, <&mixer_out4_port>, + <&mixer_out5_port>, /* I/O */ <&i2s1_port>, <&i2s2_port>, <&i2s3_port>, <&i2s4_port>, <&i2s5_port>, <&i2s6_port>, <&dmic1_port>, <&dmic2_port>, diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts index 936b106e73db..af33fe93e1d6 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts @@ -124,7 +124,7 @@ }; hda@3510000 { - nvidia,model = "jetson-tx2-hda"; + nvidia,model = "NVIDIA Jetson TX2 NX HDA"; status = "okay"; }; @@ -715,4 +715,508 @@ }; }; }; + + aconnect@2900000 { + status = "okay"; + + dma-controller@2930000 { + status = "okay"; + }; + + interrupt-controller@2a40000 { + status = "okay"; + }; + + ahub@2900800 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + xbar_admaif0_ep: endpoint { + remote-endpoint = <&admaif0_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + xbar_admaif1_ep: endpoint { + remote-endpoint = <&admaif1_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + xbar_admaif2_ep: endpoint { + remote-endpoint = <&admaif2_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + xbar_admaif3_ep: endpoint { + remote-endpoint = <&admaif3_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + xbar_admaif4_ep: endpoint { + remote-endpoint = <&admaif4_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + xbar_admaif5_ep: endpoint { + remote-endpoint = <&admaif5_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + xbar_admaif6_ep: endpoint { + remote-endpoint = <&admaif6_ep>; + }; + }; + + port@7 { + reg = <0x7>; + + xbar_admaif7_ep: endpoint { + remote-endpoint = <&admaif7_ep>; + }; + }; + + port@8 { + reg = <0x8>; + + xbar_admaif8_ep: endpoint { + remote-endpoint = <&admaif8_ep>; + }; + }; + + port@9 { + reg = <0x9>; + + xbar_admaif9_ep: endpoint { + remote-endpoint = <&admaif9_ep>; + }; + }; + + port@a { + reg = <0xa>; + + xbar_admaif10_ep: endpoint { + remote-endpoint = <&admaif10_ep>; + }; + }; + + port@b { + reg = <0xb>; + + xbar_admaif11_ep: endpoint { + remote-endpoint = <&admaif11_ep>; + }; + }; + + port@c { + reg = <0xc>; + + xbar_admaif12_ep: endpoint { + remote-endpoint = <&admaif12_ep>; + }; + }; + + port@d { + reg = <0xd>; + + xbar_admaif13_ep: endpoint { + remote-endpoint = <&admaif13_ep>; + }; + }; + + port@e { + reg = <0xe>; + + xbar_admaif14_ep: endpoint { + remote-endpoint = <&admaif14_ep>; + }; + }; + + port@f { + reg = <0xf>; + + xbar_admaif15_ep: endpoint { + remote-endpoint = <&admaif15_ep>; + }; + }; + + port@10 { + reg = <0x10>; + + xbar_admaif16_ep: endpoint { + remote-endpoint = <&admaif16_ep>; + }; + }; + + port@11 { + reg = <0x11>; + + xbar_admaif17_ep: endpoint { + remote-endpoint = <&admaif17_ep>; + }; + }; + + port@12 { + reg = <0x12>; + + xbar_admaif18_ep: endpoint { + remote-endpoint = <&admaif18_ep>; + }; + }; + + port@13 { + reg = <0x13>; + + xbar_admaif19_ep: endpoint { + remote-endpoint = <&admaif19_ep>; + }; + }; + + xbar_i2s1_port: port@14 { + reg = <0x14>; + + xbar_i2s1_ep: endpoint { + remote-endpoint = <&i2s1_cif_ep>; + }; + }; + + xbar_i2s3_port: port@16 { + reg = <0x16>; + + xbar_i2s3_ep: endpoint { + remote-endpoint = <&i2s3_cif_ep>; + }; + }; + + xbar_dmic1_port: port@1a { + reg = <0x1a>; + + xbar_dmic1_ep: endpoint { + remote-endpoint = <&dmic1_cif_ep>; + }; + }; + + xbar_dmic2_port: port@1b { + reg = <0x1b>; + + xbar_dmic2_ep: endpoint { + remote-endpoint = <&dmic2_cif_ep>; + }; + }; + }; + + admaif@290f000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + admaif0_port: port@0 { + reg = <0x0>; + + admaif0_ep: endpoint { + remote-endpoint = <&xbar_admaif0_ep>; + }; + }; + + admaif1_port: port@1 { + reg = <0x1>; + + admaif1_ep: endpoint { + remote-endpoint = <&xbar_admaif1_ep>; + }; + }; + + admaif2_port: port@2 { + reg = <0x2>; + + admaif2_ep: endpoint { + remote-endpoint = <&xbar_admaif2_ep>; + }; + }; + + admaif3_port: port@3 { + reg = <0x3>; + + admaif3_ep: endpoint { + remote-endpoint = <&xbar_admaif3_ep>; + }; + }; + + admaif4_port: port@4 { + reg = <0x4>; + + admaif4_ep: endpoint { + remote-endpoint = <&xbar_admaif4_ep>; + }; + }; + + admaif5_port: port@5 { + reg = <0x5>; + + admaif5_ep: endpoint { + remote-endpoint = <&xbar_admaif5_ep>; + }; + }; + + admaif6_port: port@6 { + reg = <0x6>; + + admaif6_ep: endpoint { + remote-endpoint = <&xbar_admaif6_ep>; + }; + }; + + admaif7_port: port@7 { + reg = <0x7>; + + admaif7_ep: endpoint { + remote-endpoint = <&xbar_admaif7_ep>; + }; + }; + + admaif8_port: port@8 { + reg = <0x8>; + + admaif8_ep: endpoint { + remote-endpoint = <&xbar_admaif8_ep>; + }; + }; + + admaif9_port: port@9 { + reg = <0x9>; + + admaif9_ep: endpoint { + remote-endpoint = <&xbar_admaif9_ep>; + }; + }; + + admaif10_port: port@a { + reg = <0xa>; + + admaif10_ep: endpoint { + remote-endpoint = <&xbar_admaif10_ep>; + }; + }; + + admaif11_port: port@b { + reg = <0xb>; + + admaif11_ep: endpoint { + remote-endpoint = <&xbar_admaif11_ep>; + }; + }; + + admaif12_port: port@c { + reg = <0xc>; + + admaif12_ep: endpoint { + remote-endpoint = <&xbar_admaif12_ep>; + }; + }; + + admaif13_port: port@d { + reg = <0xd>; + + admaif13_ep: endpoint { + remote-endpoint = <&xbar_admaif13_ep>; + }; + }; + + admaif14_port: port@e { + reg = <0xe>; + + admaif14_ep: endpoint { + remote-endpoint = <&xbar_admaif14_ep>; + }; + }; + + admaif15_port: port@f { + reg = <0xf>; + + admaif15_ep: endpoint { + remote-endpoint = <&xbar_admaif15_ep>; + }; + }; + + admaif16_port: port@10 { + reg = <0x10>; + + admaif16_ep: endpoint { + remote-endpoint = <&xbar_admaif16_ep>; + }; + }; + + admaif17_port: port@11 { + reg = <0x11>; + + admaif17_ep: endpoint { + remote-endpoint = <&xbar_admaif17_ep>; + }; + }; + + admaif18_port: port@12 { + reg = <0x12>; + + admaif18_ep: endpoint { + remote-endpoint = <&xbar_admaif18_ep>; + }; + }; + + admaif19_port: port@13 { + reg = <0x13>; + + admaif19_ep: endpoint { + remote-endpoint = <&xbar_admaif19_ep>; + }; + }; + }; + }; + + i2s@2901000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s1_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s1_ep>; + }; + }; + + i2s1_port: port@1 { + reg = <1>; + + i2s1_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + i2s@2901200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s3_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s3_ep>; + }; + }; + + i2s3_port: port@1 { + reg = <1>; + + i2s3_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + dmic@2904000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic1_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic1_ep>; + }; + }; + + dmic1_port: port@1 { + reg = <1>; + + dmic1_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + + dmic@2904100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic2_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic2_ep>; + }; + }; + + dmic2_port: port@1 { + reg = <1>; + + dmic2_dap_ep: endpoint { + /* Place holder for external Codec */ + }; + }; + }; + }; + }; + }; + + sound { + compatible = "nvidia,tegra186-audio-graph-card"; + status = "okay"; + + dais = /* FE */ + <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>, + <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>, + <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>, + <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>, + <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>, + /* Router */ + <&xbar_i2s1_port>, <&xbar_i2s3_port>, + <&xbar_dmic1_port>, <&xbar_dmic2_port>, + /* I/O */ + <&i2s1_port>, <&i2s3_port>, + <&dmic1_port>, <&dmic2_port>; + + label = "NVIDIA Jetson TX2 NX APE"; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index e94f8add1a40..9ac4f0140700 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -354,6 +354,126 @@ sound-name-prefix = "DSPK2"; status = "disabled"; }; + + tegra_sfc1: sfc@2902000 { + compatible = "nvidia,tegra186-sfc", + "nvidia,tegra210-sfc"; + reg = <0x2902000 0x200>; + sound-name-prefix = "SFC1"; + status = "disabled"; + }; + + tegra_sfc2: sfc@2902200 { + compatible = "nvidia,tegra186-sfc", + "nvidia,tegra210-sfc"; + reg = <0x2902200 0x200>; + sound-name-prefix = "SFC2"; + status = "disabled"; + }; + + tegra_sfc3: sfc@2902400 { + compatible = "nvidia,tegra186-sfc", + "nvidia,tegra210-sfc"; + reg = <0x2902400 0x200>; + sound-name-prefix = "SFC3"; + status = "disabled"; + }; + + tegra_sfc4: sfc@2902600 { + compatible = "nvidia,tegra186-sfc", + "nvidia,tegra210-sfc"; + reg = <0x2902600 0x200>; + sound-name-prefix = "SFC4"; + status = "disabled"; + }; + + tegra_mvc1: mvc@290a000 { + compatible = "nvidia,tegra186-mvc", + "nvidia,tegra210-mvc"; + reg = <0x290a000 0x200>; + sound-name-prefix = "MVC1"; + status = "disabled"; + }; + + tegra_mvc2: mvc@290a200 { + compatible = "nvidia,tegra186-mvc", + "nvidia,tegra210-mvc"; + reg = <0x290a200 0x200>; + sound-name-prefix = "MVC2"; + status = "disabled"; + }; + + tegra_amx1: amx@2903000 { + compatible = "nvidia,tegra186-amx", + "nvidia,tegra210-amx"; + reg = <0x2903000 0x100>; + sound-name-prefix = "AMX1"; + status = "disabled"; + }; + + tegra_amx2: amx@2903100 { + compatible = "nvidia,tegra186-amx", + "nvidia,tegra210-amx"; + reg = <0x2903100 0x100>; + sound-name-prefix = "AMX2"; + status = "disabled"; + }; + + tegra_amx3: amx@2903200 { + compatible = "nvidia,tegra186-amx", + "nvidia,tegra210-amx"; + reg = <0x2903200 0x100>; + sound-name-prefix = "AMX3"; + status = "disabled"; + }; + + tegra_amx4: amx@2903300 { + compatible = "nvidia,tegra186-amx", + "nvidia,tegra210-amx"; + reg = <0x2903300 0x100>; + sound-name-prefix = "AMX4"; + status = "disabled"; + }; + + tegra_adx1: adx@2903800 { + compatible = "nvidia,tegra186-adx", + "nvidia,tegra210-adx"; + reg = <0x2903800 0x100>; + sound-name-prefix = "ADX1"; + status = "disabled"; + }; + + tegra_adx2: adx@2903900 { + compatible = "nvidia,tegra186-adx", + "nvidia,tegra210-adx"; + reg = <0x2903900 0x100>; + sound-name-prefix = "ADX2"; + status = "disabled"; + }; + + tegra_adx3: adx@2903a00 { + compatible = "nvidia,tegra186-adx", + "nvidia,tegra210-adx"; + reg = <0x2903a00 0x100>; + sound-name-prefix = "ADX3"; + status = "disabled"; + }; + + tegra_adx4: adx@2903b00 { + compatible = "nvidia,tegra186-adx", + "nvidia,tegra210-adx"; + reg = <0x2903b00 0x100>; + sound-name-prefix = "ADX4"; + status = "disabled"; + }; + + tegra_amixer: amixer@290bb00 { + compatible = "nvidia,tegra186-amixer", + "nvidia,tegra210-amixer"; + reg = <0x290bb00 0x800>; + sound-name-prefix = "MIXER1"; + status = "disabled"; + }; }; }; @@ -1433,6 +1553,22 @@ power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>; }; + nvdec@15480000 { + compatible = "nvidia,tegra186-nvdec"; + reg = <0x15480000 0x40000>; + clocks = <&bpmp TEGRA186_CLK_NVDEC>; + clock-names = "nvdec"; + resets = <&bpmp TEGRA186_RESET_NVDEC>; + reset-names = "nvdec"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_NVDEC>; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDECSRD &emc>, + <&mc TEGRA186_MEMORY_CLIENT_NVDECSRD1 &emc>, + <&mc TEGRA186_MEMORY_CLIENT_NVDECSWR &emc>; + interconnect-names = "dma-mem", "read-1", "write"; + iommus = <&smmu TEGRA186_SID_NVDEC>; + }; + sor0: sor@15540000 { compatible = "nvidia,tegra186-sor"; reg = <0x15540000 0x10000>; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts index 96bd01cadb18..9f34871b8f60 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts @@ -228,6 +228,542 @@ remote-endpoint = <&dmic3_cif_ep>; }; }; + + xbar_sfc1_in_port: port@20 { + reg = <0x20>; + + xbar_sfc1_in_ep: endpoint { + remote-endpoint = <&sfc1_cif_in_ep>; + }; + }; + + port@21 { + reg = <0x21>; + + xbar_sfc1_out_ep: endpoint { + remote-endpoint = <&sfc1_cif_out_ep>; + }; + }; + + xbar_sfc2_in_port: port@22 { + reg = <0x22>; + + xbar_sfc2_in_ep: endpoint { + remote-endpoint = <&sfc2_cif_in_ep>; + }; + }; + + port@23 { + reg = <0x23>; + + xbar_sfc2_out_ep: endpoint { + remote-endpoint = <&sfc2_cif_out_ep>; + }; + }; + + xbar_sfc3_in_port: port@24 { + reg = <0x24>; + + xbar_sfc3_in_ep: endpoint { + remote-endpoint = <&sfc3_cif_in_ep>; + }; + }; + + port@25 { + reg = <0x25>; + + xbar_sfc3_out_ep: endpoint { + remote-endpoint = <&sfc3_cif_out_ep>; + }; + }; + + xbar_sfc4_in_port: port@26 { + reg = <0x26>; + + xbar_sfc4_in_ep: endpoint { + remote-endpoint = <&sfc4_cif_in_ep>; + }; + }; + + port@27 { + reg = <0x27>; + + xbar_sfc4_out_ep: endpoint { + remote-endpoint = <&sfc4_cif_out_ep>; + }; + }; + + xbar_mvc1_in_port: port@28 { + reg = <0x28>; + + xbar_mvc1_in_ep: endpoint { + remote-endpoint = <&mvc1_cif_in_ep>; + }; + }; + + port@29 { + reg = <0x29>; + + xbar_mvc1_out_ep: endpoint { + remote-endpoint = <&mvc1_cif_out_ep>; + }; + }; + + xbar_mvc2_in_port: port@2a { + reg = <0x2a>; + + xbar_mvc2_in_ep: endpoint { + remote-endpoint = <&mvc2_cif_in_ep>; + }; + }; + + port@2b { + reg = <0x2b>; + + xbar_mvc2_out_ep: endpoint { + remote-endpoint = <&mvc2_cif_out_ep>; + }; + }; + + xbar_amx1_in1_port: port@2c { + reg = <0x2c>; + + xbar_amx1_in1_ep: endpoint { + remote-endpoint = <&amx1_in1_ep>; + }; + }; + + xbar_amx1_in2_port: port@2d { + reg = <0x2d>; + + xbar_amx1_in2_ep: endpoint { + remote-endpoint = <&amx1_in2_ep>; + }; + }; + + xbar_amx1_in3_port: port@2e { + reg = <0x2e>; + + xbar_amx1_in3_ep: endpoint { + remote-endpoint = <&amx1_in3_ep>; + }; + }; + + xbar_amx1_in4_port: port@2f { + reg = <0x2f>; + + xbar_amx1_in4_ep: endpoint { + remote-endpoint = <&amx1_in4_ep>; + }; + }; + + port@30 { + reg = <0x30>; + + xbar_amx1_out_ep: endpoint { + remote-endpoint = <&amx1_out_ep>; + }; + }; + + xbar_amx2_in1_port: port@31 { + reg = <0x31>; + + xbar_amx2_in1_ep: endpoint { + remote-endpoint = <&amx2_in1_ep>; + }; + }; + + xbar_amx2_in2_port: port@32 { + reg = <0x32>; + + xbar_amx2_in2_ep: endpoint { + remote-endpoint = <&amx2_in2_ep>; + }; + }; + + xbar_amx2_in3_port: port@33 { + reg = <0x33>; + + xbar_amx2_in3_ep: endpoint { + remote-endpoint = <&amx2_in3_ep>; + }; + }; + + xbar_amx2_in4_port: port@34 { + reg = <0x34>; + + xbar_amx2_in4_ep: endpoint { + remote-endpoint = <&amx2_in4_ep>; + }; + }; + + port@35 { + reg = <0x35>; + + xbar_amx2_out_ep: endpoint { + remote-endpoint = <&amx2_out_ep>; + }; + }; + + xbar_amx3_in1_port: port@36 { + reg = <0x36>; + + xbar_amx3_in1_ep: endpoint { + remote-endpoint = <&amx3_in1_ep>; + }; + }; + + xbar_amx3_in2_port: port@37 { + reg = <0x37>; + + xbar_amx3_in2_ep: endpoint { + remote-endpoint = <&amx3_in2_ep>; + }; + }; + + xbar_amx3_in3_port: port@38 { + reg = <0x38>; + + xbar_amx3_in3_ep: endpoint { + remote-endpoint = <&amx3_in3_ep>; + }; + }; + + xbar_amx3_in4_port: port@39 { + reg = <0x39>; + + xbar_amx3_in4_ep: endpoint { + remote-endpoint = <&amx3_in4_ep>; + }; + }; + + port@3a { + reg = <0x3a>; + + xbar_amx3_out_ep: endpoint { + remote-endpoint = <&amx3_out_ep>; + }; + }; + + xbar_amx4_in1_port: port@3b { + reg = <0x3b>; + + xbar_amx4_in1_ep: endpoint { + remote-endpoint = <&amx4_in1_ep>; + }; + }; + + xbar_amx4_in2_port: port@3c { + reg = <0x3c>; + + xbar_amx4_in2_ep: endpoint { + remote-endpoint = <&amx4_in2_ep>; + }; + }; + + xbar_amx4_in3_port: port@3d { + reg = <0x3d>; + + xbar_amx4_in3_ep: endpoint { + remote-endpoint = <&amx4_in3_ep>; + }; + }; + + xbar_amx4_in4_port: port@3e { + reg = <0x3e>; + + xbar_amx4_in4_ep: endpoint { + remote-endpoint = <&amx4_in4_ep>; + }; + }; + + port@3f { + reg = <0x3f>; + + xbar_amx4_out_ep: endpoint { + remote-endpoint = <&amx4_out_ep>; + }; + }; + + xbar_adx1_in_port: port@40 { + reg = <0x40>; + + xbar_adx1_in_ep: endpoint { + remote-endpoint = <&adx1_in_ep>; + }; + }; + + port@41 { + reg = <0x41>; + + xbar_adx1_out1_ep: endpoint { + remote-endpoint = <&adx1_out1_ep>; + }; + }; + + port@42 { + reg = <0x42>; + + xbar_adx1_out2_ep: endpoint { + remote-endpoint = <&adx1_out2_ep>; + }; + }; + + port@43 { + reg = <0x43>; + + xbar_adx1_out3_ep: endpoint { + remote-endpoint = <&adx1_out3_ep>; + }; + }; + + port@44 { + reg = <0x44>; + + xbar_adx1_out4_ep: endpoint { + remote-endpoint = <&adx1_out4_ep>; + }; + }; + + xbar_adx2_in_port: port@45 { + reg = <0x45>; + + xbar_adx2_in_ep: endpoint { + remote-endpoint = <&adx2_in_ep>; + }; + }; + + port@46 { + reg = <0x46>; + + xbar_adx2_out1_ep: endpoint { + remote-endpoint = <&adx2_out1_ep>; + }; + }; + + port@47 { + reg = <0x47>; + + xbar_adx2_out2_ep: endpoint { + remote-endpoint = <&adx2_out2_ep>; + }; + }; + + port@48 { + reg = <0x48>; + + xbar_adx2_out3_ep: endpoint { + remote-endpoint = <&adx2_out3_ep>; + }; + }; + + port@49 { + reg = <0x49>; + + xbar_adx2_out4_ep: endpoint { + remote-endpoint = <&adx2_out4_ep>; + }; + }; + + xbar_adx3_in_port: port@4a { + reg = <0x4a>; + + xbar_adx3_in_ep: endpoint { + remote-endpoint = <&adx3_in_ep>; + }; + }; + + port@4b { + reg = <0x4b>; + + xbar_adx3_out1_ep: endpoint { + remote-endpoint = <&adx3_out1_ep>; + }; + }; + + port@4c { + reg = <0x4c>; + + xbar_adx3_out2_ep: endpoint { + remote-endpoint = <&adx3_out2_ep>; + }; + }; + + port@4d { + reg = <0x4d>; + + xbar_adx3_out3_ep: endpoint { + remote-endpoint = <&adx3_out3_ep>; + }; + }; + + port@4e { + reg = <0x4e>; + + xbar_adx3_out4_ep: endpoint { + remote-endpoint = <&adx3_out4_ep>; + }; + }; + + xbar_adx4_in_port: port@4f { + reg = <0x4f>; + + xbar_adx4_in_ep: endpoint { + remote-endpoint = <&adx4_in_ep>; + }; + }; + + port@50 { + reg = <0x50>; + + xbar_adx4_out1_ep: endpoint { + remote-endpoint = <&adx4_out1_ep>; + }; + }; + + port@51 { + reg = <0x51>; + + xbar_adx4_out2_ep: endpoint { + remote-endpoint = <&adx4_out2_ep>; + }; + }; + + port@52 { + reg = <0x52>; + + xbar_adx4_out3_ep: endpoint { + remote-endpoint = <&adx4_out3_ep>; + }; + }; + + port@53 { + reg = <0x53>; + + xbar_adx4_out4_ep: endpoint { + remote-endpoint = <&adx4_out4_ep>; + }; + }; + + xbar_mixer_in1_port: port@54 { + reg = <0x54>; + + xbar_mixer_in1_ep: endpoint { + remote-endpoint = <&mixer_in1_ep>; + }; + }; + + xbar_mixer_in2_port: port@55 { + reg = <0x55>; + + xbar_mixer_in2_ep: endpoint { + remote-endpoint = <&mixer_in2_ep>; + }; + }; + + xbar_mixer_in3_port: port@56 { + reg = <0x56>; + + xbar_mixer_in3_ep: endpoint { + remote-endpoint = <&mixer_in3_ep>; + }; + }; + + xbar_mixer_in4_port: port@57 { + reg = <0x57>; + + xbar_mixer_in4_ep: endpoint { + remote-endpoint = <&mixer_in4_ep>; + }; + }; + + xbar_mixer_in5_port: port@58 { + reg = <0x58>; + + xbar_mixer_in5_ep: endpoint { + remote-endpoint = <&mixer_in5_ep>; + }; + }; + + xbar_mixer_in6_port: port@59 { + reg = <0x59>; + + xbar_mixer_in6_ep: endpoint { + remote-endpoint = <&mixer_in6_ep>; + }; + }; + + xbar_mixer_in7_port: port@5a { + reg = <0x5a>; + + xbar_mixer_in7_ep: endpoint { + remote-endpoint = <&mixer_in7_ep>; + }; + }; + + xbar_mixer_in8_port: port@5b { + reg = <0x5b>; + + xbar_mixer_in8_ep: endpoint { + remote-endpoint = <&mixer_in8_ep>; + }; + }; + + xbar_mixer_in9_port: port@5c { + reg = <0x5c>; + + xbar_mixer_in9_ep: endpoint { + remote-endpoint = <&mixer_in9_ep>; + }; + }; + + xbar_mixer_in10_port: port@5d { + reg = <0x5d>; + + xbar_mixer_in10_ep: endpoint { + remote-endpoint = <&mixer_in10_ep>; + }; + }; + + port@5e { + reg = <0x5e>; + + xbar_mixer_out1_ep: endpoint { + remote-endpoint = <&mixer_out1_ep>; + }; + }; + + port@5f { + reg = <0x5f>; + + xbar_mixer_out2_ep: endpoint { + remote-endpoint = <&mixer_out2_ep>; + }; + }; + + port@60 { + reg = <0x60>; + + xbar_mixer_out3_ep: endpoint { + remote-endpoint = <&mixer_out3_ep>; + }; + }; + + port@61 { + reg = <0x61>; + + xbar_mixer_out4_ep: endpoint { + remote-endpoint = <&mixer_out4_ep>; + }; + }; + + port@62 { + reg = <0x62>; + + xbar_mixer_out5_ep: endpoint { + remote-endpoint = <&mixer_out5_ep>; + }; + }; }; admaif@290f000 { @@ -527,6 +1063,677 @@ }; }; }; + + sfc@2902000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc1_in_ep>; + }; + }; + + sfc1_out_port: port@1 { + reg = <1>; + + sfc1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc1_out_ep>; + }; + }; + }; + }; + + sfc@2902200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc2_in_ep>; + }; + }; + + sfc2_out_port: port@1 { + reg = <1>; + + sfc2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc2_out_ep>; + }; + }; + }; + }; + + sfc@2902400 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc3_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc3_in_ep>; + }; + }; + + sfc3_out_port: port@1 { + reg = <1>; + + sfc3_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc3_out_ep>; + }; + }; + }; + }; + + sfc@2902600 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc4_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc4_in_ep>; + }; + }; + + sfc4_out_port: port@1 { + reg = <1>; + + sfc4_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc4_out_ep>; + }; + }; + }; + }; + + mvc@290a000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_mvc1_in_ep>; + }; + }; + + mvc1_out_port: port@1 { + reg = <1>; + + mvc1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_mvc1_out_ep>; + }; + }; + }; + }; + + mvc@290a200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_mvc2_in_ep>; + }; + }; + + mvc2_out_port: port@1 { + reg = <1>; + + mvc2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_mvc2_out_ep>; + }; + }; + }; + }; + + amx@2903000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx1_in1_ep: endpoint { + remote-endpoint = <&xbar_amx1_in1_ep>; + }; + }; + + port@1 { + reg = <1>; + + amx1_in2_ep: endpoint { + remote-endpoint = <&xbar_amx1_in2_ep>; + }; + }; + + port@2 { + reg = <2>; + + amx1_in3_ep: endpoint { + remote-endpoint = <&xbar_amx1_in3_ep>; + }; + }; + + port@3 { + reg = <3>; + + amx1_in4_ep: endpoint { + remote-endpoint = <&xbar_amx1_in4_ep>; + }; + }; + + amx1_out_port: port@4 { + reg = <4>; + + amx1_out_ep: endpoint { + remote-endpoint = <&xbar_amx1_out_ep>; + }; + }; + }; + }; + + amx@2903100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx2_in1_ep: endpoint { + remote-endpoint = <&xbar_amx2_in1_ep>; + }; + }; + + port@1 { + reg = <1>; + + amx2_in2_ep: endpoint { + remote-endpoint = <&xbar_amx2_in2_ep>; + }; + }; + + amx2_in3_port: port@2 { + reg = <2>; + + amx2_in3_ep: endpoint { + remote-endpoint = <&xbar_amx2_in3_ep>; + }; + }; + + amx2_in4_port: port@3 { + reg = <3>; + + amx2_in4_ep: endpoint { + remote-endpoint = <&xbar_amx2_in4_ep>; + }; + }; + + amx2_out_port: port@4 { + reg = <4>; + + amx2_out_ep: endpoint { + remote-endpoint = <&xbar_amx2_out_ep>; + }; + }; + }; + }; + + amx@2903200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx3_in1_ep: endpoint { + remote-endpoint = <&xbar_amx3_in1_ep>; + }; + }; + + port@1 { + reg = <1>; + + amx3_in2_ep: endpoint { + remote-endpoint = <&xbar_amx3_in2_ep>; + }; + }; + + port@2 { + reg = <2>; + + amx3_in3_ep: endpoint { + remote-endpoint = <&xbar_amx3_in3_ep>; + }; + }; + + port@3 { + reg = <3>; + + amx3_in4_ep: endpoint { + remote-endpoint = <&xbar_amx3_in4_ep>; + }; + }; + + amx3_out_port: port@4 { + reg = <4>; + + amx3_out_ep: endpoint { + remote-endpoint = <&xbar_amx3_out_ep>; + }; + }; + }; + }; + + amx@2903300 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx4_in1_ep: endpoint { + remote-endpoint = <&xbar_amx4_in1_ep>; + }; + }; + + port@1 { + reg = <1>; + + amx4_in2_ep: endpoint { + remote-endpoint = <&xbar_amx4_in2_ep>; + }; + }; + + port@2 { + reg = <2>; + + amx4_in3_ep: endpoint { + remote-endpoint = <&xbar_amx4_in3_ep>; + }; + }; + + port@3 { + reg = <3>; + + amx4_in4_ep: endpoint { + remote-endpoint = <&xbar_amx4_in4_ep>; + }; + }; + + amx4_out_port: port@4 { + reg = <4>; + + amx4_out_ep: endpoint { + remote-endpoint = <&xbar_amx4_out_ep>; + }; + }; + }; + }; + + adx@2903800 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx1_in_ep: endpoint { + remote-endpoint = <&xbar_adx1_in_ep>; + }; + }; + + adx1_out1_port: port@1 { + reg = <1>; + + adx1_out1_ep: endpoint { + remote-endpoint = <&xbar_adx1_out1_ep>; + }; + }; + + adx1_out2_port: port@2 { + reg = <2>; + + adx1_out2_ep: endpoint { + remote-endpoint = <&xbar_adx1_out2_ep>; + }; + }; + + adx1_out3_port: port@3 { + reg = <3>; + + adx1_out3_ep: endpoint { + remote-endpoint = <&xbar_adx1_out3_ep>; + }; + }; + + adx1_out4_port: port@4 { + reg = <4>; + + adx1_out4_ep: endpoint { + remote-endpoint = <&xbar_adx1_out4_ep>; + }; + }; + }; + }; + + adx@2903900 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx2_in_ep: endpoint { + remote-endpoint = <&xbar_adx2_in_ep>; + }; + }; + + adx2_out1_port: port@1 { + reg = <1>; + + adx2_out1_ep: endpoint { + remote-endpoint = <&xbar_adx2_out1_ep>; + }; + }; + + adx2_out2_port: port@2 { + reg = <2>; + + adx2_out2_ep: endpoint { + remote-endpoint = <&xbar_adx2_out2_ep>; + }; + }; + + adx2_out3_port: port@3 { + reg = <3>; + + adx2_out3_ep: endpoint { + remote-endpoint = <&xbar_adx2_out3_ep>; + }; + }; + + adx2_out4_port: port@4 { + reg = <4>; + + adx2_out4_ep: endpoint { + remote-endpoint = <&xbar_adx2_out4_ep>; + }; + }; + }; + }; + + adx@2903a00 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx3_in_ep: endpoint { + remote-endpoint = <&xbar_adx3_in_ep>; + }; + }; + + adx3_out1_port: port@1 { + reg = <1>; + + adx3_out1_ep: endpoint { + remote-endpoint = <&xbar_adx3_out1_ep>; + }; + }; + + adx3_out2_port: port@2 { + reg = <2>; + + adx3_out2_ep: endpoint { + remote-endpoint = <&xbar_adx3_out2_ep>; + }; + }; + + adx3_out3_port: port@3 { + reg = <3>; + + adx3_out3_ep: endpoint { + remote-endpoint = <&xbar_adx3_out3_ep>; + }; + }; + + adx3_out4_port: port@4 { + reg = <4>; + + adx3_out4_ep: endpoint { + remote-endpoint = <&xbar_adx3_out4_ep>; + }; + }; + }; + }; + + adx@2903b00 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx4_in_ep: endpoint { + remote-endpoint = <&xbar_adx4_in_ep>; + }; + }; + + adx4_out1_port: port@1 { + reg = <1>; + + adx4_out1_ep: endpoint { + remote-endpoint = <&xbar_adx4_out1_ep>; + }; + }; + + adx4_out2_port: port@2 { + reg = <2>; + + adx4_out2_ep: endpoint { + remote-endpoint = <&xbar_adx4_out2_ep>; + }; + }; + + adx4_out3_port: port@3 { + reg = <3>; + + adx4_out3_ep: endpoint { + remote-endpoint = <&xbar_adx4_out3_ep>; + }; + }; + + adx4_out4_port: port@4 { + reg = <4>; + + adx4_out4_ep: endpoint { + remote-endpoint = <&xbar_adx4_out4_ep>; + }; + }; + }; + }; + + amixer@290bb00 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + mixer_in1_ep: endpoint { + remote-endpoint = <&xbar_mixer_in1_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + mixer_in2_ep: endpoint { + remote-endpoint = <&xbar_mixer_in2_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + mixer_in3_ep: endpoint { + remote-endpoint = <&xbar_mixer_in3_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + mixer_in4_ep: endpoint { + remote-endpoint = <&xbar_mixer_in4_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + mixer_in5_ep: endpoint { + remote-endpoint = <&xbar_mixer_in5_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + mixer_in6_ep: endpoint { + remote-endpoint = <&xbar_mixer_in6_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + mixer_in7_ep: endpoint { + remote-endpoint = <&xbar_mixer_in7_ep>; + }; + }; + + port@7 { + reg = <0x7>; + + mixer_in8_ep: endpoint { + remote-endpoint = <&xbar_mixer_in8_ep>; + }; + }; + + port@8 { + reg = <0x8>; + + mixer_in9_ep: endpoint { + remote-endpoint = <&xbar_mixer_in9_ep>; + }; + }; + + port@9 { + reg = <0x9>; + + mixer_in10_ep: endpoint { + remote-endpoint = <&xbar_mixer_in10_ep>; + }; + }; + + mixer_out1_port: port@a { + reg = <0xa>; + + mixer_out1_ep: endpoint { + remote-endpoint = <&xbar_mixer_out1_ep>; + }; + }; + + mixer_out2_port: port@b { + reg = <0xb>; + + mixer_out2_ep: endpoint { + remote-endpoint = <&xbar_mixer_out2_ep>; + }; + }; + + mixer_out3_port: port@c { + reg = <0xc>; + + mixer_out3_ep: endpoint { + remote-endpoint = <&xbar_mixer_out3_ep>; + }; + }; + + mixer_out4_port: port@d { + reg = <0xd>; + + mixer_out4_ep: endpoint { + remote-endpoint = <&xbar_mixer_out4_ep>; + }; + }; + + mixer_out5_port: port@e { + reg = <0xe>; + + mixer_out5_ep: endpoint { + remote-endpoint = <&xbar_mixer_out5_ep>; + }; + }; + }; + }; }; }; @@ -764,7 +1971,7 @@ "p2u-5", "p2u-6", "p2u-7"; }; - pcie_ep@141a0000 { + pcie-ep@141a0000 { status = "disabled"; vddio-pex-ctl-supply = <&vdd_1v8ao>; @@ -827,6 +2034,40 @@ /* XBAR Ports */ <&xbar_i2s1_port>, <&xbar_i2s2_port>, <&xbar_i2s4_port>, <&xbar_i2s6_port>, <&xbar_dmic3_port>, + <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>, + <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>, + <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>, + <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>, + <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>, + <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>, + <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>, + <&xbar_amx3_in1_port>, <&xbar_amx3_in2_port>, + <&xbar_amx3_in3_port>, <&xbar_amx3_in4_port>, + <&xbar_amx4_in1_port>, <&xbar_amx4_in2_port>, + <&xbar_amx4_in3_port>, <&xbar_amx4_in4_port>, + <&xbar_adx1_in_port>, <&xbar_adx2_in_port>, + <&xbar_adx3_in_port>, <&xbar_adx4_in_port>, + <&xbar_mixer_in1_port>, <&xbar_mixer_in2_port>, + <&xbar_mixer_in3_port>, <&xbar_mixer_in4_port>, + <&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>, + <&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>, + <&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>, + /* HW accelerators */ + <&sfc1_out_port>, <&sfc2_out_port>, + <&sfc3_out_port>, <&sfc4_out_port>, + <&mvc1_out_port>, <&mvc2_out_port>, + <&amx1_out_port>, <&amx2_out_port>, + <&amx3_out_port>, <&amx4_out_port>, + <&adx1_out1_port>, <&adx1_out2_port>, + <&adx1_out3_port>, <&adx1_out4_port>, + <&adx2_out1_port>, <&adx2_out2_port>, + <&adx2_out3_port>, <&adx2_out4_port>, + <&adx3_out1_port>, <&adx3_out2_port>, + <&adx3_out3_port>, <&adx3_out4_port>, + <&adx4_out1_port>, <&adx4_out2_port>, + <&adx4_out3_port>, <&adx4_out4_port>, + <&mixer_out1_port>, <&mixer_out2_port>, <&mixer_out3_port>, + <&mixer_out4_port>, <&mixer_out5_port>, /* BE I/O Ports */ <&i2s1_port>, <&i2s2_port>, <&i2s4_port>, <&i2s6_port>, <&dmic3_port>; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi index 836a7e0a4267..a055f17218bb 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi @@ -238,6 +238,542 @@ remote-endpoint = <&dspk2_cif_ep>; }; }; + + xbar_sfc1_in_port: port@20 { + reg = <0x20>; + + xbar_sfc1_in_ep: endpoint { + remote-endpoint = <&sfc1_cif_in_ep>; + }; + }; + + port@21 { + reg = <0x21>; + + xbar_sfc1_out_ep: endpoint { + remote-endpoint = <&sfc1_cif_out_ep>; + }; + }; + + xbar_sfc2_in_port: port@22 { + reg = <0x22>; + + xbar_sfc2_in_ep: endpoint { + remote-endpoint = <&sfc2_cif_in_ep>; + }; + }; + + port@23 { + reg = <0x23>; + + xbar_sfc2_out_ep: endpoint { + remote-endpoint = <&sfc2_cif_out_ep>; + }; + }; + + xbar_sfc3_in_port: port@24 { + reg = <0x24>; + + xbar_sfc3_in_ep: endpoint { + remote-endpoint = <&sfc3_cif_in_ep>; + }; + }; + + port@25 { + reg = <0x25>; + + xbar_sfc3_out_ep: endpoint { + remote-endpoint = <&sfc3_cif_out_ep>; + }; + }; + + xbar_sfc4_in_port: port@26 { + reg = <0x26>; + + xbar_sfc4_in_ep: endpoint { + remote-endpoint = <&sfc4_cif_in_ep>; + }; + }; + + port@27 { + reg = <0x27>; + + xbar_sfc4_out_ep: endpoint { + remote-endpoint = <&sfc4_cif_out_ep>; + }; + }; + + xbar_mvc1_in_port: port@28 { + reg = <0x28>; + + xbar_mvc1_in_ep: endpoint { + remote-endpoint = <&mvc1_cif_in_ep>; + }; + }; + + port@29 { + reg = <0x29>; + + xbar_mvc1_out_ep: endpoint { + remote-endpoint = <&mvc1_cif_out_ep>; + }; + }; + + xbar_mvc2_in_port: port@2a { + reg = <0x2a>; + + xbar_mvc2_in_ep: endpoint { + remote-endpoint = <&mvc2_cif_in_ep>; + }; + }; + + port@2b { + reg = <0x2b>; + + xbar_mvc2_out_ep: endpoint { + remote-endpoint = <&mvc2_cif_out_ep>; + }; + }; + + xbar_amx1_in1_port: port@2c { + reg = <0x2c>; + + xbar_amx1_in1_ep: endpoint { + remote-endpoint = <&amx1_in1_ep>; + }; + }; + + xbar_amx1_in2_port: port@2d { + reg = <0x2d>; + + xbar_amx1_in2_ep: endpoint { + remote-endpoint = <&amx1_in2_ep>; + }; + }; + + xbar_amx1_in3_port: port@2e { + reg = <0x2e>; + + xbar_amx1_in3_ep: endpoint { + remote-endpoint = <&amx1_in3_ep>; + }; + }; + + xbar_amx1_in4_port: port@2f { + reg = <0x2f>; + + xbar_amx1_in4_ep: endpoint { + remote-endpoint = <&amx1_in4_ep>; + }; + }; + + port@30 { + reg = <0x30>; + + xbar_amx1_out_ep: endpoint { + remote-endpoint = <&amx1_out_ep>; + }; + }; + + xbar_amx2_in1_port: port@31 { + reg = <0x31>; + + xbar_amx2_in1_ep: endpoint { + remote-endpoint = <&amx2_in1_ep>; + }; + }; + + xbar_amx2_in2_port: port@32 { + reg = <0x32>; + + xbar_amx2_in2_ep: endpoint { + remote-endpoint = <&amx2_in2_ep>; + }; + }; + + xbar_amx2_in3_port: port@33 { + reg = <0x33>; + + xbar_amx2_in3_ep: endpoint { + remote-endpoint = <&amx2_in3_ep>; + }; + }; + + xbar_amx2_in4_port: port@34 { + reg = <0x34>; + + xbar_amx2_in4_ep: endpoint { + remote-endpoint = <&amx2_in4_ep>; + }; + }; + + port@35 { + reg = <0x35>; + + xbar_amx2_out_ep: endpoint { + remote-endpoint = <&amx2_out_ep>; + }; + }; + + xbar_amx3_in1_port: port@36 { + reg = <0x36>; + + xbar_amx3_in1_ep: endpoint { + remote-endpoint = <&amx3_in1_ep>; + }; + }; + + xbar_amx3_in2_port: port@37 { + reg = <0x37>; + + xbar_amx3_in2_ep: endpoint { + remote-endpoint = <&amx3_in2_ep>; + }; + }; + + xbar_amx3_in3_port: port@38 { + reg = <0x38>; + + xbar_amx3_in3_ep: endpoint { + remote-endpoint = <&amx3_in3_ep>; + }; + }; + + xbar_amx3_in4_port: port@39 { + reg = <0x39>; + + xbar_amx3_in4_ep: endpoint { + remote-endpoint = <&amx3_in4_ep>; + }; + }; + + port@3a { + reg = <0x3a>; + + xbar_amx3_out_ep: endpoint { + remote-endpoint = <&amx3_out_ep>; + }; + }; + + xbar_amx4_in1_port: port@3b { + reg = <0x3b>; + + xbar_amx4_in1_ep: endpoint { + remote-endpoint = <&amx4_in1_ep>; + }; + }; + + xbar_amx4_in2_port: port@3c { + reg = <0x3c>; + + xbar_amx4_in2_ep: endpoint { + remote-endpoint = <&amx4_in2_ep>; + }; + }; + + xbar_amx4_in3_port: port@3d { + reg = <0x3d>; + + xbar_amx4_in3_ep: endpoint { + remote-endpoint = <&amx4_in3_ep>; + }; + }; + + xbar_amx4_in4_port: port@3e { + reg = <0x3e>; + + xbar_amx4_in4_ep: endpoint { + remote-endpoint = <&amx4_in4_ep>; + }; + }; + + port@3f { + reg = <0x3f>; + + xbar_amx4_out_ep: endpoint { + remote-endpoint = <&amx4_out_ep>; + }; + }; + + xbar_adx1_in_port: port@40 { + reg = <0x40>; + + xbar_adx1_in_ep: endpoint { + remote-endpoint = <&adx1_in_ep>; + }; + }; + + port@41 { + reg = <0x41>; + + xbar_adx1_out1_ep: endpoint { + remote-endpoint = <&adx1_out1_ep>; + }; + }; + + port@42 { + reg = <0x42>; + + xbar_adx1_out2_ep: endpoint { + remote-endpoint = <&adx1_out2_ep>; + }; + }; + + port@43 { + reg = <0x43>; + + xbar_adx1_out3_ep: endpoint { + remote-endpoint = <&adx1_out3_ep>; + }; + }; + + port@44 { + reg = <0x44>; + + xbar_adx1_out4_ep: endpoint { + remote-endpoint = <&adx1_out4_ep>; + }; + }; + + xbar_adx2_in_port: port@45 { + reg = <0x45>; + + xbar_adx2_in_ep: endpoint { + remote-endpoint = <&adx2_in_ep>; + }; + }; + + port@46 { + reg = <0x46>; + + xbar_adx2_out1_ep: endpoint { + remote-endpoint = <&adx2_out1_ep>; + }; + }; + + port@47 { + reg = <0x47>; + + xbar_adx2_out2_ep: endpoint { + remote-endpoint = <&adx2_out2_ep>; + }; + }; + + port@48 { + reg = <0x48>; + + xbar_adx2_out3_ep: endpoint { + remote-endpoint = <&adx2_out3_ep>; + }; + }; + + port@49 { + reg = <0x49>; + + xbar_adx2_out4_ep: endpoint { + remote-endpoint = <&adx2_out4_ep>; + }; + }; + + xbar_adx3_in_port: port@4a { + reg = <0x4a>; + + xbar_adx3_in_ep: endpoint { + remote-endpoint = <&adx3_in_ep>; + }; + }; + + port@4b { + reg = <0x4b>; + + xbar_adx3_out1_ep: endpoint { + remote-endpoint = <&adx3_out1_ep>; + }; + }; + + port@4c { + reg = <0x4c>; + + xbar_adx3_out2_ep: endpoint { + remote-endpoint = <&adx3_out2_ep>; + }; + }; + + port@4d { + reg = <0x4d>; + + xbar_adx3_out3_ep: endpoint { + remote-endpoint = <&adx3_out3_ep>; + }; + }; + + port@4e { + reg = <0x4e>; + + xbar_adx3_out4_ep: endpoint { + remote-endpoint = <&adx3_out4_ep>; + }; + }; + + xbar_adx4_in_port: port@4f { + reg = <0x4f>; + + xbar_adx4_in_ep: endpoint { + remote-endpoint = <&adx4_in_ep>; + }; + }; + + port@50 { + reg = <0x50>; + + xbar_adx4_out1_ep: endpoint { + remote-endpoint = <&adx4_out1_ep>; + }; + }; + + port@51 { + reg = <0x51>; + + xbar_adx4_out2_ep: endpoint { + remote-endpoint = <&adx4_out2_ep>; + }; + }; + + port@52 { + reg = <0x52>; + + xbar_adx4_out3_ep: endpoint { + remote-endpoint = <&adx4_out3_ep>; + }; + }; + + port@53 { + reg = <0x53>; + + xbar_adx4_out4_ep: endpoint { + remote-endpoint = <&adx4_out4_ep>; + }; + }; + + xbar_mixer_in1_port: port@54 { + reg = <0x54>; + + xbar_mixer_in1_ep: endpoint { + remote-endpoint = <&mixer_in1_ep>; + }; + }; + + xbar_mixer_in2_port: port@55 { + reg = <0x55>; + + xbar_mixer_in2_ep: endpoint { + remote-endpoint = <&mixer_in2_ep>; + }; + }; + + xbar_mixer_in3_port: port@56 { + reg = <0x56>; + + xbar_mixer_in3_ep: endpoint { + remote-endpoint = <&mixer_in3_ep>; + }; + }; + + xbar_mixer_in4_port: port@57 { + reg = <0x57>; + + xbar_mixer_in4_ep: endpoint { + remote-endpoint = <&mixer_in4_ep>; + }; + }; + + xbar_mixer_in5_port: port@58 { + reg = <0x58>; + + xbar_mixer_in5_ep: endpoint { + remote-endpoint = <&mixer_in5_ep>; + }; + }; + + xbar_mixer_in6_port: port@59 { + reg = <0x59>; + + xbar_mixer_in6_ep: endpoint { + remote-endpoint = <&mixer_in6_ep>; + }; + }; + + xbar_mixer_in7_port: port@5a { + reg = <0x5a>; + + xbar_mixer_in7_ep: endpoint { + remote-endpoint = <&mixer_in7_ep>; + }; + }; + + xbar_mixer_in8_port: port@5b { + reg = <0x5b>; + + xbar_mixer_in8_ep: endpoint { + remote-endpoint = <&mixer_in8_ep>; + }; + }; + + xbar_mixer_in9_port: port@5c { + reg = <0x5c>; + + xbar_mixer_in9_ep: endpoint { + remote-endpoint = <&mixer_in9_ep>; + }; + }; + + xbar_mixer_in10_port: port@5d { + reg = <0x5d>; + + xbar_mixer_in10_ep: endpoint { + remote-endpoint = <&mixer_in10_ep>; + }; + }; + + port@5e { + reg = <0x5e>; + + xbar_mixer_out1_ep: endpoint { + remote-endpoint = <&mixer_out1_ep>; + }; + }; + + port@5f { + reg = <0x5f>; + + xbar_mixer_out2_ep: endpoint { + remote-endpoint = <&mixer_out2_ep>; + }; + }; + + port@60 { + reg = <0x60>; + + xbar_mixer_out3_ep: endpoint { + remote-endpoint = <&mixer_out3_ep>; + }; + }; + + port@61 { + reg = <0x61>; + + xbar_mixer_out4_ep: endpoint { + remote-endpoint = <&mixer_out4_ep>; + }; + }; + + port@62 { + reg = <0x62>; + + xbar_mixer_out5_ep: endpoint { + remote-endpoint = <&mixer_out5_ep>; + }; + }; }; admaif@290f000 { @@ -585,6 +1121,679 @@ }; }; }; + + sfc@2902000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc1_in_ep>; + convert-rate = <44100>; + }; + }; + + sfc1_out_port: port@1 { + reg = <1>; + + sfc1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc1_out_ep>; + convert-rate = <48000>; + }; + }; + }; + }; + + sfc@2902200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc2_in_ep>; + }; + }; + + sfc2_out_port: port@1 { + reg = <1>; + + sfc2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc2_out_ep>; + }; + }; + }; + }; + + sfc@2902400 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc3_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc3_in_ep>; + }; + }; + + sfc3_out_port: port@1 { + reg = <1>; + + sfc3_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc3_out_ep>; + }; + }; + }; + }; + + sfc@2902600 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc4_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc4_in_ep>; + }; + }; + + sfc4_out_port: port@1 { + reg = <1>; + + sfc4_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc4_out_ep>; + }; + }; + }; + }; + + mvc@290a000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_mvc1_in_ep>; + }; + }; + + mvc1_out_port: port@1 { + reg = <1>; + + mvc1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_mvc1_out_ep>; + }; + }; + }; + }; + + mvc@290a200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_mvc2_in_ep>; + }; + }; + + mvc2_out_port: port@1 { + reg = <1>; + + mvc2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_mvc2_out_ep>; + }; + }; + }; + }; + + amx@2903000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx1_in1_ep: endpoint { + remote-endpoint = <&xbar_amx1_in1_ep>; + }; + }; + + port@1 { + reg = <1>; + + amx1_in2_ep: endpoint { + remote-endpoint = <&xbar_amx1_in2_ep>; + }; + }; + + port@2 { + reg = <2>; + + amx1_in3_ep: endpoint { + remote-endpoint = <&xbar_amx1_in3_ep>; + }; + }; + + port@3 { + reg = <3>; + + amx1_in4_ep: endpoint { + remote-endpoint = <&xbar_amx1_in4_ep>; + }; + }; + + amx1_out_port: port@4 { + reg = <4>; + + amx1_out_ep: endpoint { + remote-endpoint = <&xbar_amx1_out_ep>; + }; + }; + }; + }; + + amx@2903100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx2_in1_ep: endpoint { + remote-endpoint = <&xbar_amx2_in1_ep>; + }; + }; + + port@1 { + reg = <1>; + + amx2_in2_ep: endpoint { + remote-endpoint = <&xbar_amx2_in2_ep>; + }; + }; + + amx2_in3_port: port@2 { + reg = <2>; + + amx2_in3_ep: endpoint { + remote-endpoint = <&xbar_amx2_in3_ep>; + }; + }; + + amx2_in4_port: port@3 { + reg = <3>; + + amx2_in4_ep: endpoint { + remote-endpoint = <&xbar_amx2_in4_ep>; + }; + }; + + amx2_out_port: port@4 { + reg = <4>; + + amx2_out_ep: endpoint { + remote-endpoint = <&xbar_amx2_out_ep>; + }; + }; + }; + }; + + amx@2903200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx3_in1_ep: endpoint { + remote-endpoint = <&xbar_amx3_in1_ep>; + }; + }; + + port@1 { + reg = <1>; + + amx3_in2_ep: endpoint { + remote-endpoint = <&xbar_amx3_in2_ep>; + }; + }; + + port@2 { + reg = <2>; + + amx3_in3_ep: endpoint { + remote-endpoint = <&xbar_amx3_in3_ep>; + }; + }; + + port@3 { + reg = <3>; + + amx3_in4_ep: endpoint { + remote-endpoint = <&xbar_amx3_in4_ep>; + }; + }; + + amx3_out_port: port@4 { + reg = <4>; + + amx3_out_ep: endpoint { + remote-endpoint = <&xbar_amx3_out_ep>; + }; + }; + }; + }; + + amx@2903300 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx4_in1_ep: endpoint { + remote-endpoint = <&xbar_amx4_in1_ep>; + }; + }; + + port@1 { + reg = <1>; + + amx4_in2_ep: endpoint { + remote-endpoint = <&xbar_amx4_in2_ep>; + }; + }; + + port@2 { + reg = <2>; + + amx4_in3_ep: endpoint { + remote-endpoint = <&xbar_amx4_in3_ep>; + }; + }; + + port@3 { + reg = <3>; + + amx4_in4_ep: endpoint { + remote-endpoint = <&xbar_amx4_in4_ep>; + }; + }; + + amx4_out_port: port@4 { + reg = <4>; + + amx4_out_ep: endpoint { + remote-endpoint = <&xbar_amx4_out_ep>; + }; + }; + }; + }; + + adx@2903800 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx1_in_ep: endpoint { + remote-endpoint = <&xbar_adx1_in_ep>; + }; + }; + + adx1_out1_port: port@1 { + reg = <1>; + + adx1_out1_ep: endpoint { + remote-endpoint = <&xbar_adx1_out1_ep>; + }; + }; + + adx1_out2_port: port@2 { + reg = <2>; + + adx1_out2_ep: endpoint { + remote-endpoint = <&xbar_adx1_out2_ep>; + }; + }; + + adx1_out3_port: port@3 { + reg = <3>; + + adx1_out3_ep: endpoint { + remote-endpoint = <&xbar_adx1_out3_ep>; + }; + }; + + adx1_out4_port: port@4 { + reg = <4>; + + adx1_out4_ep: endpoint { + remote-endpoint = <&xbar_adx1_out4_ep>; + }; + }; + }; + }; + + adx@2903900 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx2_in_ep: endpoint { + remote-endpoint = <&xbar_adx2_in_ep>; + }; + }; + + adx2_out1_port: port@1 { + reg = <1>; + + adx2_out1_ep: endpoint { + remote-endpoint = <&xbar_adx2_out1_ep>; + }; + }; + + adx2_out2_port: port@2 { + reg = <2>; + + adx2_out2_ep: endpoint { + remote-endpoint = <&xbar_adx2_out2_ep>; + }; + }; + + adx2_out3_port: port@3 { + reg = <3>; + + adx2_out3_ep: endpoint { + remote-endpoint = <&xbar_adx2_out3_ep>; + }; + }; + + adx2_out4_port: port@4 { + reg = <4>; + + adx2_out4_ep: endpoint { + remote-endpoint = <&xbar_adx2_out4_ep>; + }; + }; + }; + }; + + adx@2903a00 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx3_in_ep: endpoint { + remote-endpoint = <&xbar_adx3_in_ep>; + }; + }; + + adx3_out1_port: port@1 { + reg = <1>; + + adx3_out1_ep: endpoint { + remote-endpoint = <&xbar_adx3_out1_ep>; + }; + }; + + adx3_out2_port: port@2 { + reg = <2>; + + adx3_out2_ep: endpoint { + remote-endpoint = <&xbar_adx3_out2_ep>; + }; + }; + + adx3_out3_port: port@3 { + reg = <3>; + + adx3_out3_ep: endpoint { + remote-endpoint = <&xbar_adx3_out3_ep>; + }; + }; + + adx3_out4_port: port@4 { + reg = <4>; + + adx3_out4_ep: endpoint { + remote-endpoint = <&xbar_adx3_out4_ep>; + }; + }; + }; + }; + + adx@2903b00 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx4_in_ep: endpoint { + remote-endpoint = <&xbar_adx4_in_ep>; + }; + }; + + adx4_out1_port: port@1 { + reg = <1>; + + adx4_out1_ep: endpoint { + remote-endpoint = <&xbar_adx4_out1_ep>; + }; + }; + + adx4_out2_port: port@2 { + reg = <2>; + + adx4_out2_ep: endpoint { + remote-endpoint = <&xbar_adx4_out2_ep>; + }; + }; + + adx4_out3_port: port@3 { + reg = <3>; + + adx4_out3_ep: endpoint { + remote-endpoint = <&xbar_adx4_out3_ep>; + }; + }; + + adx4_out4_port: port@4 { + reg = <4>; + + adx4_out4_ep: endpoint { + remote-endpoint = <&xbar_adx4_out4_ep>; + }; + }; + }; + }; + + amixer@290bb00 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + mixer_in1_ep: endpoint { + remote-endpoint = <&xbar_mixer_in1_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + mixer_in2_ep: endpoint { + remote-endpoint = <&xbar_mixer_in2_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + mixer_in3_ep: endpoint { + remote-endpoint = <&xbar_mixer_in3_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + mixer_in4_ep: endpoint { + remote-endpoint = <&xbar_mixer_in4_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + mixer_in5_ep: endpoint { + remote-endpoint = <&xbar_mixer_in5_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + mixer_in6_ep: endpoint { + remote-endpoint = <&xbar_mixer_in6_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + mixer_in7_ep: endpoint { + remote-endpoint = <&xbar_mixer_in7_ep>; + }; + }; + + port@7 { + reg = <0x7>; + + mixer_in8_ep: endpoint { + remote-endpoint = <&xbar_mixer_in8_ep>; + }; + }; + + port@8 { + reg = <0x8>; + + mixer_in9_ep: endpoint { + remote-endpoint = <&xbar_mixer_in9_ep>; + }; + }; + + port@9 { + reg = <0x9>; + + mixer_in10_ep: endpoint { + remote-endpoint = <&xbar_mixer_in10_ep>; + }; + }; + + mixer_out1_port: port@a { + reg = <0xa>; + + mixer_out1_ep: endpoint { + remote-endpoint = <&xbar_mixer_out1_ep>; + }; + }; + + mixer_out2_port: port@b { + reg = <0xb>; + + mixer_out2_ep: endpoint { + remote-endpoint = <&xbar_mixer_out2_ep>; + }; + }; + + mixer_out3_port: port@c { + reg = <0xc>; + + mixer_out3_ep: endpoint { + remote-endpoint = <&xbar_mixer_out3_ep>; + }; + }; + + mixer_out4_port: port@d { + reg = <0xd>; + + mixer_out4_ep: endpoint { + remote-endpoint = <&xbar_mixer_out4_ep>; + }; + }; + + mixer_out5_port: port@e { + reg = <0xe>; + + mixer_out5_ep: endpoint { + remote-endpoint = <&xbar_mixer_out5_ep>; + }; + }; + }; + }; }; }; @@ -741,7 +1950,7 @@ "p2u-5", "p2u-6", "p2u-7"; }; - pcie_ep@141a0000 { + pcie-ep@141a0000 { status = "disabled"; vddio-pex-ctl-supply = <&vdd_1v8ao>; @@ -850,6 +2059,41 @@ <&xbar_i2s3_port>, <&xbar_i2s5_port>, <&xbar_dmic1_port>, <&xbar_dmic2_port>, <&xbar_dmic4_port>, <&xbar_dspk1_port>, <&xbar_dspk2_port>, + <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>, + <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>, + <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>, + <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>, + <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>, + <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>, + <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>, + <&xbar_amx3_in1_port>, <&xbar_amx3_in2_port>, + <&xbar_amx3_in3_port>, <&xbar_amx3_in4_port>, + <&xbar_amx4_in1_port>, <&xbar_amx4_in2_port>, + <&xbar_amx4_in3_port>, <&xbar_amx4_in4_port>, + <&xbar_adx1_in_port>, <&xbar_adx2_in_port>, + <&xbar_adx3_in_port>, <&xbar_adx4_in_port>, + <&xbar_mixer_in1_port>, <&xbar_mixer_in2_port>, + <&xbar_mixer_in3_port>, <&xbar_mixer_in4_port>, + <&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>, + <&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>, + <&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>, + /* HW accelerators */ + <&sfc1_out_port>, <&sfc2_out_port>, + <&sfc3_out_port>, <&sfc4_out_port>, + <&mvc1_out_port>, <&mvc2_out_port>, + <&amx1_out_port>, <&amx2_out_port>, + <&amx3_out_port>, <&amx4_out_port>, + <&adx1_out1_port>, <&adx1_out2_port>, + <&adx1_out3_port>, <&adx1_out4_port>, + <&adx2_out1_port>, <&adx2_out2_port>, + <&adx2_out3_port>, <&adx2_out4_port>, + <&adx3_out1_port>, <&adx3_out2_port>, + <&adx3_out3_port>, <&adx3_out4_port>, + <&adx4_out1_port>, <&adx4_out2_port>, + <&adx4_out3_port>, <&adx4_out4_port>, + <&mixer_out1_port>, <&mixer_out2_port>, + <&mixer_out3_port>, <&mixer_out4_port>, + <&mixer_out5_port>, /* BE I/O Ports */ <&i2s3_port>, <&i2s5_port>, <&dmic1_port>, <&dmic2_port>, <&dmic4_port>, diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index c8250a3f7891..851e049b3519 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -34,11 +34,53 @@ reg = <0x2200000 0x10000>, <0x2210000 0x10000>; interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; interrupt-controller; #gpio-cells = <2>; @@ -363,6 +405,122 @@ sound-name-prefix = "DSPK2"; status = "disabled"; }; + + tegra_sfc1: sfc@2902000 { + compatible = "nvidia,tegra194-sfc", + "nvidia,tegra210-sfc"; + reg = <0x2902000 0x200>; + sound-name-prefix = "SFC1"; + status = "disabled"; + }; + + tegra_sfc2: sfc@2902200 { + compatible = "nvidia,tegra194-sfc", + "nvidia,tegra210-sfc"; + reg = <0x2902200 0x200>; + sound-name-prefix = "SFC2"; + status = "disabled"; + }; + + tegra_sfc3: sfc@2902400 { + compatible = "nvidia,tegra194-sfc", + "nvidia,tegra210-sfc"; + reg = <0x2902400 0x200>; + sound-name-prefix = "SFC3"; + status = "disabled"; + }; + + tegra_sfc4: sfc@2902600 { + compatible = "nvidia,tegra194-sfc", + "nvidia,tegra210-sfc"; + reg = <0x2902600 0x200>; + sound-name-prefix = "SFC4"; + status = "disabled"; + }; + + tegra_mvc1: mvc@290a000 { + compatible = "nvidia,tegra194-mvc", + "nvidia,tegra210-mvc"; + reg = <0x290a000 0x200>; + sound-name-prefix = "MVC1"; + status = "disabled"; + }; + + tegra_mvc2: mvc@290a200 { + compatible = "nvidia,tegra194-mvc", + "nvidia,tegra210-mvc"; + reg = <0x290a200 0x200>; + sound-name-prefix = "MVC2"; + status = "disabled"; + }; + + tegra_amx1: amx@2903000 { + compatible = "nvidia,tegra194-amx"; + reg = <0x2903000 0x100>; + sound-name-prefix = "AMX1"; + status = "disabled"; + }; + + tegra_amx2: amx@2903100 { + compatible = "nvidia,tegra194-amx"; + reg = <0x2903100 0x100>; + sound-name-prefix = "AMX2"; + status = "disabled"; + }; + + tegra_amx3: amx@2903200 { + compatible = "nvidia,tegra194-amx"; + reg = <0x2903200 0x100>; + sound-name-prefix = "AMX3"; + status = "disabled"; + }; + + tegra_amx4: amx@2903300 { + compatible = "nvidia,tegra194-amx"; + reg = <0x2903300 0x100>; + sound-name-prefix = "AMX4"; + status = "disabled"; + }; + + tegra_adx1: adx@2903800 { + compatible = "nvidia,tegra194-adx", + "nvidia,tegra210-adx"; + reg = <0x2903800 0x100>; + sound-name-prefix = "ADX1"; + status = "disabled"; + }; + + tegra_adx2: adx@2903900 { + compatible = "nvidia,tegra194-adx", + "nvidia,tegra210-adx"; + reg = <0x2903900 0x100>; + sound-name-prefix = "ADX2"; + status = "disabled"; + }; + + tegra_adx3: adx@2903a00 { + compatible = "nvidia,tegra194-adx", + "nvidia,tegra210-adx"; + reg = <0x2903a00 0x100>; + sound-name-prefix = "ADX3"; + status = "disabled"; + }; + + tegra_adx4: adx@2903b00 { + compatible = "nvidia,tegra194-adx", + "nvidia,tegra210-adx"; + reg = <0x2903b00 0x100>; + sound-name-prefix = "ADX4"; + status = "disabled"; + }; + + tegra_amixer: amixer@290bb00 { + compatible = "nvidia,tegra194-amixer", + "nvidia,tegra210-amixer"; + reg = <0x290bb00 0x800>; + sound-name-prefix = "MIXER1"; + status = "disabled"; + }; }; }; @@ -1281,7 +1439,10 @@ reg-names = "security", "gpio"; reg = <0xc2f0000 0x1000>, <0xc2f1000 0x1000>; - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1412,6 +1573,25 @@ interconnect-names = "dma-mem"; iommus = <&smmu TEGRA194_SID_HOST1X>; + nvdec@15140000 { + compatible = "nvidia,tegra194-nvdec"; + reg = <0x15140000 0x00040000>; + clocks = <&bpmp TEGRA194_CLK_NVDEC1>; + clock-names = "nvdec"; + resets = <&bpmp TEGRA194_RESET_NVDEC1>; + reset-names = "nvdec"; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_NVDECB>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDEC1SRD &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVDEC1SRD1 &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVDEC1SWR &emc>; + interconnect-names = "dma-mem", "read-1", "write"; + iommus = <&smmu TEGRA194_SID_NVDEC1>; + dma-coherent; + + nvidia,host1x-class = <0xf5>; + }; + display-hub@15200000 { compatible = "nvidia,tegra194-display"; reg = <0x15200000 0x00040000>; @@ -1525,6 +1705,25 @@ iommus = <&smmu TEGRA194_SID_VIC>; }; + nvdec@15480000 { + compatible = "nvidia,tegra194-nvdec"; + reg = <0x15480000 0x00040000>; + clocks = <&bpmp TEGRA194_CLK_NVDEC>; + clock-names = "nvdec"; + resets = <&bpmp TEGRA194_RESET_NVDEC>; + reset-names = "nvdec"; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_NVDECA>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDECSRD &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVDECSRD1 &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVDECSWR &emc>; + interconnect-names = "dma-mem", "read-1", "write"; + iommus = <&smmu TEGRA194_SID_NVDEC>; + dma-coherent; + + nvidia,host1x-class = <0xf0>; + }; + dpaux0: dpaux@155c0000 { compatible = "nvidia,tegra194-dpaux"; reg = <0x155c0000 0x10000>; @@ -2121,7 +2320,7 @@ dma-coherent; }; - pcie_ep@14160000 { + pcie-ep@14160000 { compatible = "nvidia,tegra194-pcie-ep"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>; reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K) */ @@ -2161,7 +2360,7 @@ dma-coherent; }; - pcie_ep@14180000 { + pcie-ep@14180000 { compatible = "nvidia,tegra194-pcie-ep"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>; reg = <0x00 0x14180000 0x0 0x00020000>, /* appl registers (128K) */ @@ -2201,7 +2400,7 @@ dma-coherent; }; - pcie_ep@141a0000 { + pcie-ep@141a0000 { compatible = "nvidia,tegra194-pcie-ep"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>; reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */ diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts index 7d3e3634743e..2e17df6f20ad 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts @@ -339,6 +339,481 @@ }; }; + sfc@702d2000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc1_in_ep>; + }; + }; + + sfc1_out_port: port@1 { + reg = <1>; + + sfc1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc1_out_ep>; + }; + }; + }; + }; + + sfc@702d2200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc2_in_ep>; + }; + }; + + sfc2_out_port: port@1 { + reg = <1>; + + sfc2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc2_out_ep>; + }; + }; + }; + }; + + sfc@702d2400 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc3_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc3_in_ep>; + }; + }; + + sfc3_out_port: port@1 { + reg = <1>; + + sfc3_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc3_out_ep>; + }; + }; + }; + }; + + sfc@702d2600 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc4_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc4_in_ep>; + }; + }; + + sfc4_out_port: port@1 { + reg = <1>; + + sfc4_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc4_out_ep>; + }; + }; + }; + }; + + mvc@702da000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_mvc1_in_ep>; + }; + }; + + mvc1_out_port: port@1 { + reg = <1>; + + mvc1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_mvc1_out_ep>; + }; + }; + }; + }; + + mvc@702da200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_mvc2_in_ep>; + }; + }; + + mvc2_out_port: port@1 { + reg = <1>; + + mvc2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_mvc2_out_ep>; + }; + }; + }; + }; + + amx@702d3000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx1_in1_ep: endpoint { + remote-endpoint = <&xbar_amx1_in1_ep>; + }; + }; + + port@1 { + reg = <1>; + + amx1_in2_ep: endpoint { + remote-endpoint = <&xbar_amx1_in2_ep>; + }; + }; + + port@2 { + reg = <2>; + + amx1_in3_ep: endpoint { + remote-endpoint = <&xbar_amx1_in3_ep>; + }; + }; + + port@3 { + reg = <3>; + + amx1_in4_ep: endpoint { + remote-endpoint = <&xbar_amx1_in4_ep>; + }; + }; + + amx1_out_port: port@4 { + reg = <4>; + + amx1_out_ep: endpoint { + remote-endpoint = <&xbar_amx1_out_ep>; + }; + }; + }; + }; + + amx@702d3100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx2_in1_ep: endpoint { + remote-endpoint = <&xbar_amx2_in1_ep>; + }; + }; + + port@1 { + reg = <1>; + + amx2_in2_ep: endpoint { + remote-endpoint = <&xbar_amx2_in2_ep>; + }; + }; + + amx2_in3_port: port@2 { + reg = <2>; + + amx2_in3_ep: endpoint { + remote-endpoint = <&xbar_amx2_in3_ep>; + }; + }; + + amx2_in4_port: port@3 { + reg = <3>; + + amx2_in4_ep: endpoint { + remote-endpoint = <&xbar_amx2_in4_ep>; + }; + }; + + amx2_out_port: port@4 { + reg = <4>; + + amx2_out_ep: endpoint { + remote-endpoint = <&xbar_amx2_out_ep>; + }; + }; + }; + }; + + adx@702d3800 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx1_in_ep: endpoint { + remote-endpoint = <&xbar_adx1_in_ep>; + }; + }; + + adx1_out1_port: port@1 { + reg = <1>; + + adx1_out1_ep: endpoint { + remote-endpoint = <&xbar_adx1_out1_ep>; + }; + }; + + adx1_out2_port: port@2 { + reg = <2>; + + adx1_out2_ep: endpoint { + remote-endpoint = <&xbar_adx1_out2_ep>; + }; + }; + + adx1_out3_port: port@3 { + reg = <3>; + + adx1_out3_ep: endpoint { + remote-endpoint = <&xbar_adx1_out3_ep>; + }; + }; + + adx1_out4_port: port@4 { + reg = <4>; + + adx1_out4_ep: endpoint { + remote-endpoint = <&xbar_adx1_out4_ep>; + }; + }; + }; + }; + + adx@702d3900 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx2_in_ep: endpoint { + remote-endpoint = <&xbar_adx2_in_ep>; + }; + }; + + adx2_out1_port: port@1 { + reg = <1>; + + adx2_out1_ep: endpoint { + remote-endpoint = <&xbar_adx2_out1_ep>; + }; + }; + + adx2_out2_port: port@2 { + reg = <2>; + + adx2_out2_ep: endpoint { + remote-endpoint = <&xbar_adx2_out2_ep>; + }; + }; + + adx2_out3_port: port@3 { + reg = <3>; + + adx2_out3_ep: endpoint { + remote-endpoint = <&xbar_adx2_out3_ep>; + }; + }; + + adx2_out4_port: port@4 { + reg = <4>; + + adx2_out4_ep: endpoint { + remote-endpoint = <&xbar_adx2_out4_ep>; + }; + }; + }; + }; + + amixer@702dbb00 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + mixer_in1_ep: endpoint { + remote-endpoint = <&xbar_mixer_in1_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + mixer_in2_ep: endpoint { + remote-endpoint = <&xbar_mixer_in2_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + mixer_in3_ep: endpoint { + remote-endpoint = <&xbar_mixer_in3_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + mixer_in4_ep: endpoint { + remote-endpoint = <&xbar_mixer_in4_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + mixer_in5_ep: endpoint { + remote-endpoint = <&xbar_mixer_in5_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + mixer_in6_ep: endpoint { + remote-endpoint = <&xbar_mixer_in6_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + mixer_in7_ep: endpoint { + remote-endpoint = <&xbar_mixer_in7_ep>; + }; + }; + + port@7 { + reg = <0x7>; + + mixer_in8_ep: endpoint { + remote-endpoint = <&xbar_mixer_in8_ep>; + }; + }; + + port@8 { + reg = <0x8>; + + mixer_in9_ep: endpoint { + remote-endpoint = <&xbar_mixer_in9_ep>; + }; + }; + + port@9 { + reg = <0x9>; + + mixer_in10_ep: endpoint { + remote-endpoint = <&xbar_mixer_in10_ep>; + }; + }; + + mixer_out1_port: port@a { + reg = <0xa>; + + mixer_out1_ep: endpoint { + remote-endpoint = <&xbar_mixer_out1_ep>; + }; + }; + + mixer_out2_port: port@b { + reg = <0xb>; + + mixer_out2_ep: endpoint { + remote-endpoint = <&xbar_mixer_out2_ep>; + }; + }; + + mixer_out3_port: port@c { + reg = <0xc>; + + mixer_out3_ep: endpoint { + remote-endpoint = <&xbar_mixer_out3_ep>; + }; + }; + + mixer_out4_port: port@d { + reg = <0xd>; + + mixer_out4_ep: endpoint { + remote-endpoint = <&xbar_mixer_out4_ep>; + }; + }; + + mixer_out5_port: port@e { + reg = <0xe>; + + mixer_out5_ep: endpoint { + remote-endpoint = <&xbar_mixer_out5_ep>; + }; + }; + }; + }; + ports { xbar_i2s1_port: port@a { reg = <0xa>; @@ -403,6 +878,382 @@ remote-endpoint = <&dmic3_cif_ep>; }; }; + + xbar_sfc1_in_port: port@12 { + reg = <0x12>; + + xbar_sfc1_in_ep: endpoint { + remote-endpoint = <&sfc1_cif_in_ep>; + }; + }; + + port@13 { + reg = <0x13>; + + xbar_sfc1_out_ep: endpoint { + remote-endpoint = <&sfc1_cif_out_ep>; + }; + }; + + xbar_sfc2_in_port: port@14 { + reg = <0x14>; + + xbar_sfc2_in_ep: endpoint { + remote-endpoint = <&sfc2_cif_in_ep>; + }; + }; + + port@15 { + reg = <0x15>; + + xbar_sfc2_out_ep: endpoint { + remote-endpoint = <&sfc2_cif_out_ep>; + }; + }; + + xbar_sfc3_in_port: port@16 { + reg = <0x16>; + + xbar_sfc3_in_ep: endpoint { + remote-endpoint = <&sfc3_cif_in_ep>; + }; + }; + + port@17 { + reg = <0x17>; + + xbar_sfc3_out_ep: endpoint { + remote-endpoint = <&sfc3_cif_out_ep>; + }; + }; + + xbar_sfc4_in_port: port@18 { + reg = <0x18>; + + xbar_sfc4_in_ep: endpoint { + remote-endpoint = <&sfc4_cif_in_ep>; + }; + }; + + port@19 { + reg = <0x19>; + + xbar_sfc4_out_ep: endpoint { + remote-endpoint = <&sfc4_cif_out_ep>; + }; + }; + + xbar_mvc1_in_port: port@1a { + reg = <0x1a>; + + xbar_mvc1_in_ep: endpoint { + remote-endpoint = <&mvc1_cif_in_ep>; + }; + }; + + port@1b { + reg = <0x1b>; + + xbar_mvc1_out_ep: endpoint { + remote-endpoint = <&mvc1_cif_out_ep>; + }; + }; + + xbar_mvc2_in_port: port@1c { + reg = <0x1c>; + + xbar_mvc2_in_ep: endpoint { + remote-endpoint = <&mvc2_cif_in_ep>; + }; + }; + + port@1d { + reg = <0x1d>; + + xbar_mvc2_out_ep: endpoint { + remote-endpoint = <&mvc2_cif_out_ep>; + }; + }; + + xbar_amx1_in1_port: port@1e { + reg = <0x1e>; + + xbar_amx1_in1_ep: endpoint { + remote-endpoint = <&amx1_in1_ep>; + }; + }; + + xbar_amx1_in2_port: port@1f { + reg = <0x1f>; + + xbar_amx1_in2_ep: endpoint { + remote-endpoint = <&amx1_in2_ep>; + }; + }; + + xbar_amx1_in3_port: port@20 { + reg = <0x20>; + + xbar_amx1_in3_ep: endpoint { + remote-endpoint = <&amx1_in3_ep>; + }; + }; + + xbar_amx1_in4_port: port@21 { + reg = <0x21>; + + xbar_amx1_in4_ep: endpoint { + remote-endpoint = <&amx1_in4_ep>; + }; + }; + + port@22 { + reg = <0x22>; + + xbar_amx1_out_ep: endpoint { + remote-endpoint = <&amx1_out_ep>; + }; + }; + + xbar_amx2_in1_port: port@23 { + reg = <0x23>; + + xbar_amx2_in1_ep: endpoint { + remote-endpoint = <&amx2_in1_ep>; + }; + }; + + xbar_amx2_in2_port: port@24 { + reg = <0x24>; + + xbar_amx2_in2_ep: endpoint { + remote-endpoint = <&amx2_in2_ep>; + }; + }; + + xbar_amx2_in3_port: port@25 { + reg = <0x25>; + + xbar_amx2_in3_ep: endpoint { + remote-endpoint = <&amx2_in3_ep>; + }; + }; + + xbar_amx2_in4_port: port@26 { + reg = <0x26>; + + xbar_amx2_in4_ep: endpoint { + remote-endpoint = <&amx2_in4_ep>; + }; + }; + + port@27 { + reg = <0x27>; + + xbar_amx2_out_ep: endpoint { + remote-endpoint = <&amx2_out_ep>; + }; + }; + + xbar_adx1_in_port: port@28 { + reg = <0x28>; + + xbar_adx1_in_ep: endpoint { + remote-endpoint = <&adx1_in_ep>; + }; + }; + + port@29 { + reg = <0x29>; + + xbar_adx1_out1_ep: endpoint { + remote-endpoint = <&adx1_out1_ep>; + }; + }; + + port@2a { + reg = <0x2a>; + + xbar_adx1_out2_ep: endpoint { + remote-endpoint = <&adx1_out2_ep>; + }; + }; + + port@2b { + reg = <0x2b>; + + xbar_adx1_out3_ep: endpoint { + remote-endpoint = <&adx1_out3_ep>; + }; + }; + + port@2c { + reg = <0x2c>; + + xbar_adx1_out4_ep: endpoint { + remote-endpoint = <&adx1_out4_ep>; + }; + }; + + xbar_adx2_in_port: port@2d { + reg = <0x2d>; + + xbar_adx2_in_ep: endpoint { + remote-endpoint = <&adx2_in_ep>; + }; + }; + + port@2e { + reg = <0x2e>; + + xbar_adx2_out1_ep: endpoint { + remote-endpoint = <&adx2_out1_ep>; + }; + }; + + port@2f { + reg = <0x2f>; + + xbar_adx2_out2_ep: endpoint { + remote-endpoint = <&adx2_out2_ep>; + }; + }; + + port@30 { + reg = <0x30>; + + xbar_adx2_out3_ep: endpoint { + remote-endpoint = <&adx2_out3_ep>; + }; + }; + + port@31 { + reg = <0x31>; + + xbar_adx2_out4_ep: endpoint { + remote-endpoint = <&adx2_out4_ep>; + }; + }; + + xbar_mixer_in1_port: port@32 { + reg = <0x32>; + + xbar_mixer_in1_ep: endpoint { + remote-endpoint = <&mixer_in1_ep>; + }; + }; + + xbar_mixer_in2_port: port@33 { + reg = <0x33>; + + xbar_mixer_in2_ep: endpoint { + remote-endpoint = <&mixer_in2_ep>; + }; + }; + + xbar_mixer_in3_port: port@34 { + reg = <0x34>; + + xbar_mixer_in3_ep: endpoint { + remote-endpoint = <&mixer_in3_ep>; + }; + }; + + xbar_mixer_in4_port: port@35 { + reg = <0x35>; + + xbar_mixer_in4_ep: endpoint { + remote-endpoint = <&mixer_in4_ep>; + }; + }; + + xbar_mixer_in5_port: port@36 { + reg = <0x36>; + + xbar_mixer_in5_ep: endpoint { + remote-endpoint = <&mixer_in5_ep>; + }; + }; + + xbar_mixer_in6_port: port@37 { + reg = <0x37>; + + xbar_mixer_in6_ep: endpoint { + remote-endpoint = <&mixer_in6_ep>; + }; + }; + + xbar_mixer_in7_port: port@38 { + reg = <0x38>; + + xbar_mixer_in7_ep: endpoint { + remote-endpoint = <&mixer_in7_ep>; + }; + }; + + xbar_mixer_in8_port: port@39 { + reg = <0x39>; + + xbar_mixer_in8_ep: endpoint { + remote-endpoint = <&mixer_in8_ep>; + }; + }; + + xbar_mixer_in9_port: port@3a { + reg = <0x3a>; + + xbar_mixer_in9_ep: endpoint { + remote-endpoint = <&mixer_in9_ep>; + }; + }; + + xbar_mixer_in10_port: port@3b { + reg = <0x3b>; + + xbar_mixer_in10_ep: endpoint { + remote-endpoint = <&mixer_in10_ep>; + }; + }; + + port@3c { + reg = <0x3c>; + + xbar_mixer_out1_ep: endpoint { + remote-endpoint = <&mixer_out1_ep>; + }; + }; + + port@3d { + reg = <0x3d>; + + xbar_mixer_out2_ep: endpoint { + remote-endpoint = <&mixer_out2_ep>; + }; + }; + + port@3e { + reg = <0x3e>; + + xbar_mixer_out3_ep: endpoint { + remote-endpoint = <&mixer_out3_ep>; + }; + }; + + port@3f { + reg = <0x3f>; + + xbar_mixer_out4_ep: endpoint { + remote-endpoint = <&mixer_out4_ep>; + }; + }; + + port@40 { + reg = <0x40>; + + xbar_mixer_out5_ep: endpoint { + remote-endpoint = <&mixer_out5_ep>; + }; + }; }; }; }; @@ -420,6 +1271,31 @@ <&xbar_i2s1_port>, <&xbar_i2s2_port>, <&xbar_i2s3_port>, <&xbar_i2s4_port>, <&xbar_i2s5_port>, <&xbar_dmic1_port>, <&xbar_dmic2_port>, <&xbar_dmic3_port>, + <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>, + <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>, + <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>, + <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>, + <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>, + <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>, + <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>, + <&xbar_adx1_in_port>, <&xbar_adx2_in_port>, + <&xbar_mixer_in1_port>, <&xbar_mixer_in2_port>, + <&xbar_mixer_in3_port>, <&xbar_mixer_in4_port>, + <&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>, + <&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>, + <&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>, + /* HW accelerators */ + <&sfc1_out_port>, <&sfc2_out_port>, + <&sfc3_out_port>, <&sfc4_out_port>, + <&mvc1_out_port>, <&mvc2_out_port>, + <&amx1_out_port>, <&amx2_out_port>, + <&adx1_out1_port>, <&adx1_out2_port>, + <&adx1_out3_port>, <&adx1_out4_port>, + <&adx2_out1_port>, <&adx2_out2_port>, + <&adx2_out3_port>, <&adx2_out4_port>, + <&mixer_out1_port>, <&mixer_out2_port>, + <&mixer_out3_port>, <&mixer_out4_port>, + <&mixer_out5_port>, /* I/O DAP Ports */ <&i2s1_port>, <&i2s2_port>, <&i2s3_port>, <&i2s4_port>, <&i2s5_port>, <&dmic1_port>, <&dmic2_port>, <&dmic3_port>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts index 7dbb13f20de7..030f264eccd5 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts @@ -746,6 +746,481 @@ }; }; + sfc@702d2000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc1_in_ep>; + }; + }; + + sfc1_out_port: port@1 { + reg = <1>; + + sfc1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc1_out_ep>; + }; + }; + }; + }; + + sfc@702d2200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc2_in_ep>; + }; + }; + + sfc2_out_port: port@1 { + reg = <1>; + + sfc2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc2_out_ep>; + }; + }; + }; + }; + + sfc@702d2400 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc3_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc3_in_ep>; + }; + }; + + sfc3_out_port: port@1 { + reg = <1>; + + sfc3_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc3_out_ep>; + }; + }; + }; + }; + + sfc@702d2600 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc4_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc4_in_ep>; + }; + }; + + sfc4_out_port: port@1 { + reg = <1>; + + sfc4_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc4_out_ep>; + }; + }; + }; + }; + + mvc@702da000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_mvc1_in_ep>; + }; + }; + + mvc1_out_port: port@1 { + reg = <1>; + + mvc1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_mvc1_out_ep>; + }; + }; + }; + }; + + mvc@702da200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_mvc2_in_ep>; + }; + }; + + mvc2_out_port: port@1 { + reg = <1>; + + mvc2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_mvc2_out_ep>; + }; + }; + }; + }; + + amx@702d3000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx1_in1_ep: endpoint { + remote-endpoint = <&xbar_amx1_in1_ep>; + }; + }; + + port@1 { + reg = <1>; + + amx1_in2_ep: endpoint { + remote-endpoint = <&xbar_amx1_in2_ep>; + }; + }; + + port@2 { + reg = <2>; + + amx1_in3_ep: endpoint { + remote-endpoint = <&xbar_amx1_in3_ep>; + }; + }; + + port@3 { + reg = <3>; + + amx1_in4_ep: endpoint { + remote-endpoint = <&xbar_amx1_in4_ep>; + }; + }; + + amx1_out_port: port@4 { + reg = <4>; + + amx1_out_ep: endpoint { + remote-endpoint = <&xbar_amx1_out_ep>; + }; + }; + }; + }; + + amx@702d3100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx2_in1_ep: endpoint { + remote-endpoint = <&xbar_amx2_in1_ep>; + }; + }; + + port@1 { + reg = <1>; + + amx2_in2_ep: endpoint { + remote-endpoint = <&xbar_amx2_in2_ep>; + }; + }; + + amx2_in3_port: port@2 { + reg = <2>; + + amx2_in3_ep: endpoint { + remote-endpoint = <&xbar_amx2_in3_ep>; + }; + }; + + amx2_in4_port: port@3 { + reg = <3>; + + amx2_in4_ep: endpoint { + remote-endpoint = <&xbar_amx2_in4_ep>; + }; + }; + + amx2_out_port: port@4 { + reg = <4>; + + amx2_out_ep: endpoint { + remote-endpoint = <&xbar_amx2_out_ep>; + }; + }; + }; + }; + + adx@702d3800 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx1_in_ep: endpoint { + remote-endpoint = <&xbar_adx1_in_ep>; + }; + }; + + adx1_out1_port: port@1 { + reg = <1>; + + adx1_out1_ep: endpoint { + remote-endpoint = <&xbar_adx1_out1_ep>; + }; + }; + + adx1_out2_port: port@2 { + reg = <2>; + + adx1_out2_ep: endpoint { + remote-endpoint = <&xbar_adx1_out2_ep>; + }; + }; + + adx1_out3_port: port@3 { + reg = <3>; + + adx1_out3_ep: endpoint { + remote-endpoint = <&xbar_adx1_out3_ep>; + }; + }; + + adx1_out4_port: port@4 { + reg = <4>; + + adx1_out4_ep: endpoint { + remote-endpoint = <&xbar_adx1_out4_ep>; + }; + }; + }; + }; + + adx@702d3900 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx2_in_ep: endpoint { + remote-endpoint = <&xbar_adx2_in_ep>; + }; + }; + + adx2_out1_port: port@1 { + reg = <1>; + + adx2_out1_ep: endpoint { + remote-endpoint = <&xbar_adx2_out1_ep>; + }; + }; + + adx2_out2_port: port@2 { + reg = <2>; + + adx2_out2_ep: endpoint { + remote-endpoint = <&xbar_adx2_out2_ep>; + }; + }; + + adx2_out3_port: port@3 { + reg = <3>; + + adx2_out3_ep: endpoint { + remote-endpoint = <&xbar_adx2_out3_ep>; + }; + }; + + adx2_out4_port: port@4 { + reg = <4>; + + adx2_out4_ep: endpoint { + remote-endpoint = <&xbar_adx2_out4_ep>; + }; + }; + }; + }; + + amixer@702dbb00 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + mixer_in1_ep: endpoint { + remote-endpoint = <&xbar_mixer_in1_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + mixer_in2_ep: endpoint { + remote-endpoint = <&xbar_mixer_in2_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + mixer_in3_ep: endpoint { + remote-endpoint = <&xbar_mixer_in3_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + mixer_in4_ep: endpoint { + remote-endpoint = <&xbar_mixer_in4_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + mixer_in5_ep: endpoint { + remote-endpoint = <&xbar_mixer_in5_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + mixer_in6_ep: endpoint { + remote-endpoint = <&xbar_mixer_in6_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + mixer_in7_ep: endpoint { + remote-endpoint = <&xbar_mixer_in7_ep>; + }; + }; + + port@7 { + reg = <0x7>; + + mixer_in8_ep: endpoint { + remote-endpoint = <&xbar_mixer_in8_ep>; + }; + }; + + port@8 { + reg = <0x8>; + + mixer_in9_ep: endpoint { + remote-endpoint = <&xbar_mixer_in9_ep>; + }; + }; + + port@9 { + reg = <0x9>; + + mixer_in10_ep: endpoint { + remote-endpoint = <&xbar_mixer_in10_ep>; + }; + }; + + mixer_out1_port: port@a { + reg = <0xa>; + + mixer_out1_ep: endpoint { + remote-endpoint = <&xbar_mixer_out1_ep>; + }; + }; + + mixer_out2_port: port@b { + reg = <0xb>; + + mixer_out2_ep: endpoint { + remote-endpoint = <&xbar_mixer_out2_ep>; + }; + }; + + mixer_out3_port: port@c { + reg = <0xc>; + + mixer_out3_ep: endpoint { + remote-endpoint = <&xbar_mixer_out3_ep>; + }; + }; + + mixer_out4_port: port@d { + reg = <0xd>; + + mixer_out4_ep: endpoint { + remote-endpoint = <&xbar_mixer_out4_ep>; + }; + }; + + mixer_out5_port: port@e { + reg = <0xe>; + + mixer_out5_ep: endpoint { + remote-endpoint = <&xbar_mixer_out5_ep>; + }; + }; + }; + }; + ports { xbar_i2s3_port: port@c { reg = <0xc>; @@ -778,6 +1253,382 @@ remote-endpoint = <&dmic2_cif_ep>; }; }; + + xbar_sfc1_in_port: port@12 { + reg = <0x12>; + + xbar_sfc1_in_ep: endpoint { + remote-endpoint = <&sfc1_cif_in_ep>; + }; + }; + + port@13 { + reg = <0x13>; + + xbar_sfc1_out_ep: endpoint { + remote-endpoint = <&sfc1_cif_out_ep>; + }; + }; + + xbar_sfc2_in_port: port@14 { + reg = <0x14>; + + xbar_sfc2_in_ep: endpoint { + remote-endpoint = <&sfc2_cif_in_ep>; + }; + }; + + port@15 { + reg = <0x15>; + + xbar_sfc2_out_ep: endpoint { + remote-endpoint = <&sfc2_cif_out_ep>; + }; + }; + + xbar_sfc3_in_port: port@16 { + reg = <0x16>; + + xbar_sfc3_in_ep: endpoint { + remote-endpoint = <&sfc3_cif_in_ep>; + }; + }; + + port@17 { + reg = <0x17>; + + xbar_sfc3_out_ep: endpoint { + remote-endpoint = <&sfc3_cif_out_ep>; + }; + }; + + xbar_sfc4_in_port: port@18 { + reg = <0x18>; + + xbar_sfc4_in_ep: endpoint { + remote-endpoint = <&sfc4_cif_in_ep>; + }; + }; + + port@19 { + reg = <0x19>; + + xbar_sfc4_out_ep: endpoint { + remote-endpoint = <&sfc4_cif_out_ep>; + }; + }; + + xbar_mvc1_in_port: port@1a { + reg = <0x1a>; + + xbar_mvc1_in_ep: endpoint { + remote-endpoint = <&mvc1_cif_in_ep>; + }; + }; + + port@1b { + reg = <0x1b>; + + xbar_mvc1_out_ep: endpoint { + remote-endpoint = <&mvc1_cif_out_ep>; + }; + }; + + xbar_mvc2_in_port: port@1c { + reg = <0x1c>; + + xbar_mvc2_in_ep: endpoint { + remote-endpoint = <&mvc2_cif_in_ep>; + }; + }; + + port@1d { + reg = <0x1d>; + + xbar_mvc2_out_ep: endpoint { + remote-endpoint = <&mvc2_cif_out_ep>; + }; + }; + + xbar_amx1_in1_port: port@1e { + reg = <0x1e>; + + xbar_amx1_in1_ep: endpoint { + remote-endpoint = <&amx1_in1_ep>; + }; + }; + + xbar_amx1_in2_port: port@1f { + reg = <0x1f>; + + xbar_amx1_in2_ep: endpoint { + remote-endpoint = <&amx1_in2_ep>; + }; + }; + + xbar_amx1_in3_port: port@20 { + reg = <0x20>; + + xbar_amx1_in3_ep: endpoint { + remote-endpoint = <&amx1_in3_ep>; + }; + }; + + xbar_amx1_in4_port: port@21 { + reg = <0x21>; + + xbar_amx1_in4_ep: endpoint { + remote-endpoint = <&amx1_in4_ep>; + }; + }; + + port@22 { + reg = <0x22>; + + xbar_amx1_out_ep: endpoint { + remote-endpoint = <&amx1_out_ep>; + }; + }; + + xbar_amx2_in1_port: port@23 { + reg = <0x23>; + + xbar_amx2_in1_ep: endpoint { + remote-endpoint = <&amx2_in1_ep>; + }; + }; + + xbar_amx2_in2_port: port@24 { + reg = <0x24>; + + xbar_amx2_in2_ep: endpoint { + remote-endpoint = <&amx2_in2_ep>; + }; + }; + + xbar_amx2_in3_port: port@25 { + reg = <0x25>; + + xbar_amx2_in3_ep: endpoint { + remote-endpoint = <&amx2_in3_ep>; + }; + }; + + xbar_amx2_in4_port: port@26 { + reg = <0x26>; + + xbar_amx2_in4_ep: endpoint { + remote-endpoint = <&amx2_in4_ep>; + }; + }; + + port@27 { + reg = <0x27>; + + xbar_amx2_out_ep: endpoint { + remote-endpoint = <&amx2_out_ep>; + }; + }; + + xbar_adx1_in_port: port@28 { + reg = <0x28>; + + xbar_adx1_in_ep: endpoint { + remote-endpoint = <&adx1_in_ep>; + }; + }; + + port@29 { + reg = <0x29>; + + xbar_adx1_out1_ep: endpoint { + remote-endpoint = <&adx1_out1_ep>; + }; + }; + + port@2a { + reg = <0x2a>; + + xbar_adx1_out2_ep: endpoint { + remote-endpoint = <&adx1_out2_ep>; + }; + }; + + port@2b { + reg = <0x2b>; + + xbar_adx1_out3_ep: endpoint { + remote-endpoint = <&adx1_out3_ep>; + }; + }; + + port@2c { + reg = <0x2c>; + + xbar_adx1_out4_ep: endpoint { + remote-endpoint = <&adx1_out4_ep>; + }; + }; + + xbar_adx2_in_port: port@2d { + reg = <0x2d>; + + xbar_adx2_in_ep: endpoint { + remote-endpoint = <&adx2_in_ep>; + }; + }; + + port@2e { + reg = <0x2e>; + + xbar_adx2_out1_ep: endpoint { + remote-endpoint = <&adx2_out1_ep>; + }; + }; + + port@2f { + reg = <0x2f>; + + xbar_adx2_out2_ep: endpoint { + remote-endpoint = <&adx2_out2_ep>; + }; + }; + + port@30 { + reg = <0x30>; + + xbar_adx2_out3_ep: endpoint { + remote-endpoint = <&adx2_out3_ep>; + }; + }; + + port@31 { + reg = <0x31>; + + xbar_adx2_out4_ep: endpoint { + remote-endpoint = <&adx2_out4_ep>; + }; + }; + + xbar_mixer_in1_port: port@32 { + reg = <0x32>; + + xbar_mixer_in1_ep: endpoint { + remote-endpoint = <&mixer_in1_ep>; + }; + }; + + xbar_mixer_in2_port: port@33 { + reg = <0x33>; + + xbar_mixer_in2_ep: endpoint { + remote-endpoint = <&mixer_in2_ep>; + }; + }; + + xbar_mixer_in3_port: port@34 { + reg = <0x34>; + + xbar_mixer_in3_ep: endpoint { + remote-endpoint = <&mixer_in3_ep>; + }; + }; + + xbar_mixer_in4_port: port@35 { + reg = <0x35>; + + xbar_mixer_in4_ep: endpoint { + remote-endpoint = <&mixer_in4_ep>; + }; + }; + + xbar_mixer_in5_port: port@36 { + reg = <0x36>; + + xbar_mixer_in5_ep: endpoint { + remote-endpoint = <&mixer_in5_ep>; + }; + }; + + xbar_mixer_in6_port: port@37 { + reg = <0x37>; + + xbar_mixer_in6_ep: endpoint { + remote-endpoint = <&mixer_in6_ep>; + }; + }; + + xbar_mixer_in7_port: port@38 { + reg = <0x38>; + + xbar_mixer_in7_ep: endpoint { + remote-endpoint = <&mixer_in7_ep>; + }; + }; + + xbar_mixer_in8_port: port@39 { + reg = <0x39>; + + xbar_mixer_in8_ep: endpoint { + remote-endpoint = <&mixer_in8_ep>; + }; + }; + + xbar_mixer_in9_port: port@3a { + reg = <0x3a>; + + xbar_mixer_in9_ep: endpoint { + remote-endpoint = <&mixer_in9_ep>; + }; + }; + + xbar_mixer_in10_port: port@3b { + reg = <0x3b>; + + xbar_mixer_in10_ep: endpoint { + remote-endpoint = <&mixer_in10_ep>; + }; + }; + + port@3c { + reg = <0x3c>; + + xbar_mixer_out1_ep: endpoint { + remote-endpoint = <&mixer_out1_ep>; + }; + }; + + port@3d { + reg = <0x3d>; + + xbar_mixer_out2_ep: endpoint { + remote-endpoint = <&mixer_out2_ep>; + }; + }; + + port@3e { + reg = <0x3e>; + + xbar_mixer_out3_ep: endpoint { + remote-endpoint = <&mixer_out3_ep>; + }; + }; + + port@3f { + reg = <0x3f>; + + xbar_mixer_out4_ep: endpoint { + remote-endpoint = <&mixer_out4_ep>; + }; + }; + + port@40 { + reg = <0x40>; + + xbar_mixer_out5_ep: endpoint { + remote-endpoint = <&mixer_out5_ep>; + }; + }; }; }; }; @@ -1039,6 +1890,31 @@ /* Router */ <&xbar_i2s3_port>, <&xbar_i2s4_port>, <&xbar_dmic1_port>, <&xbar_dmic2_port>, + <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>, + <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>, + <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>, + <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>, + <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>, + <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>, + <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>, + <&xbar_adx1_in_port>, <&xbar_adx2_in_port>, + <&xbar_mixer_in1_port>, <&xbar_mixer_in2_port>, + <&xbar_mixer_in3_port>, <&xbar_mixer_in4_port>, + <&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>, + <&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>, + <&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>, + /* HW accelerators */ + <&sfc1_out_port>, <&sfc2_out_port>, + <&sfc3_out_port>, <&sfc4_out_port>, + <&mvc1_out_port>, <&mvc2_out_port>, + <&amx1_out_port>, <&amx2_out_port>, + <&adx1_out1_port>, <&adx1_out2_port>, + <&adx1_out3_port>, <&adx1_out4_port>, + <&adx2_out1_port>, <&adx2_out2_port>, + <&adx2_out3_port>, <&adx2_out4_port>, + <&mixer_out1_port>, <&mixer_out2_port>, + <&mixer_out3_port>, <&mixer_out4_port>, + <&mixer_out5_port>, /* I/O DAP Ports */ <&i2s3_port>, <&i2s4_port>, <&dmic1_port>, <&dmic2_port>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 26b3f98a211c..ccdc0dec4e59 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -1641,6 +1641,83 @@ status = "disabled"; }; + tegra_sfc1: sfc@702d2000 { + compatible = "nvidia,tegra210-sfc"; + reg = <0x702d2000 0x200>; + sound-name-prefix = "SFC1"; + status = "disabled"; + }; + + tegra_sfc2: sfc@702d2200 { + compatible = "nvidia,tegra210-sfc"; + reg = <0x702d2200 0x200>; + sound-name-prefix = "SFC2"; + status = "disabled"; + }; + + tegra_sfc3: sfc@702d2400 { + compatible = "nvidia,tegra210-sfc"; + reg = <0x702d2400 0x200>; + sound-name-prefix = "SFC3"; + status = "disabled"; + }; + + tegra_sfc4: sfc@702d2600 { + compatible = "nvidia,tegra210-sfc"; + reg = <0x702d2600 0x200>; + sound-name-prefix = "SFC4"; + status = "disabled"; + }; + + tegra_mvc1: mvc@702da000 { + compatible = "nvidia,tegra210-mvc"; + reg = <0x702da000 0x200>; + sound-name-prefix = "MVC1"; + status = "disabled"; + }; + + tegra_mvc2: mvc@702da200 { + compatible = "nvidia,tegra210-mvc"; + reg = <0x702da200 0x200>; + sound-name-prefix = "MVC2"; + status = "disabled"; + }; + + tegra_amx1: amx@702d3000 { + compatible = "nvidia,tegra210-amx"; + reg = <0x702d3000 0x100>; + sound-name-prefix = "AMX1"; + status = "disabled"; + }; + + tegra_amx2: amx@702d3100 { + compatible = "nvidia,tegra210-amx"; + reg = <0x702d3100 0x100>; + sound-name-prefix = "AMX2"; + status = "disabled"; + }; + + tegra_adx1: adx@702d3800 { + compatible = "nvidia,tegra210-adx"; + reg = <0x702d3800 0x100>; + sound-name-prefix = "ADX1"; + status = "disabled"; + }; + + tegra_adx2: adx@702d3900 { + compatible = "nvidia,tegra210-adx"; + reg = <0x702d3900 0x100>; + sound-name-prefix = "ADX2"; + status = "disabled"; + }; + + tegra_amixer: amixer@702dbb00 { + compatible = "nvidia,tegra210-amixer"; + reg = <0x702dbb00 0x800>; + sound-name-prefix = "MIXER1"; + status = "disabled"; + }; + ports { #address-cells = <1>; #size-cells = <0>; @@ -1743,7 +1820,7 @@ }; usb@7d000000 { - compatible = "nvidia,tegra210-ehci", "nvidia,tegra30-ehci", "usb-ehci"; + compatible = "nvidia,tegra210-ehci", "nvidia,tegra30-ehci"; reg = <0x0 0x7d000000 0x0 0x4000>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; @@ -1781,7 +1858,7 @@ }; usb@7d004000 { - compatible = "nvidia,tegra210-ehci", "nvidia,tegra30-ehci", "usb-ehci"; + compatible = "nvidia,tegra210-ehci", "nvidia,tegra30-ehci"; reg = <0x0 0x7d004000 0x0 0x4000>; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 70516508be56..6b816eb33309 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -15,6 +15,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-octagon-talkman.dtb @@ -33,12 +34,18 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8996-pmi8996-sony-xperia-tone-keyaki.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-dora.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-kagura.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-keyaki.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-gemini.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-scorpio.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-fxtec-pro1.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-oneplus-cheeseburger.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-oneplus-dumpling.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-lilac.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb @@ -48,6 +55,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r3-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r2.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r0.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-kb.dtb @@ -66,6 +75,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb @@ -84,6 +94,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-fajita.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-microsoft-surface-duo.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts index f3c0dbfd0a23..a5320d6d30e7 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts @@ -5,9 +5,839 @@ /dts-v1/; -#include "apq8016-sbc.dtsi" +#include "msm8916-pm8916.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-mpp.h> +#include <dt-bindings/sound/apq8016-lpass.h> / { model = "Qualcomm Technologies, Inc. APQ 8016 SBC"; compatible = "qcom,apq8016-sbc", "qcom,apq8016"; + + aliases { + serial0 = &blsp1_uart2; + serial1 = &blsp1_uart1; + usid0 = &pm8916_0; + i2c0 = &blsp_i2c2; + i2c1 = &blsp_i2c6; + i2c3 = &blsp_i2c4; + spi0 = &blsp_spi5; + spi1 = &blsp_spi3; + }; + + chosen { + stdout-path = "serial0"; + }; + + camera_vdddo_1v8: camera-vdddo-1v8 { + compatible = "regulator-fixed"; + regulator-name = "camera_vdddo"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + camera_vdda_2v8: camera-vdda-2v8 { + compatible = "regulator-fixed"; + regulator-name = "camera_vdda"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + camera_vddd_1v5: camera-vddd-1v5 { + compatible = "regulator-fixed"; + regulator-name = "camera_vddd"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + reserved-memory { + ramoops@bff00000 { + compatible = "ramoops"; + reg = <0x0 0xbff00000 0x0 0x100000>; + + record-size = <0x20000>; + console-size = <0x20000>; + ftrace-size = <0x20000>; + }; + }; + + usb2513 { + compatible = "smsc,usb3503"; + reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>; + initial-mode = <1>; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_id_default>; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7533_out>; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&msm_key_volp_n_default>; + + button@0 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&msmgpio_leds>, + <&pm8916_gpios_leds>, + <&pm8916_mpps_leds>; + + compatible = "gpio-leds"; + + led@1 { + label = "apq8016-sbc:green:user1"; + gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led@2 { + label = "apq8016-sbc:green:user2"; + gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@3 { + label = "apq8016-sbc:green:user3"; + gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + led@4 { + label = "apq8016-sbc:green:user4"; + gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + panic-indicator; + default-state = "off"; + }; + + led@5 { + label = "apq8016-sbc:yellow:wlan"; + gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + led@6 { + label = "apq8016-sbc:blue:bt"; + gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp_i2c2 { + /* On Low speed expansion */ + status = "okay"; + label = "LS-I2C0"; +}; + +&blsp_i2c4 { + /* On High speed expansion */ + status = "okay"; + label = "HS-I2C2"; + + adv_bridge: bridge@39 { + status = "okay"; + + compatible = "adi,adv7533"; + reg = <0x39>; + + interrupt-parent = <&msmgpio>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + + adi,dsi-lanes = <4>; + clocks = <&rpmcc RPM_SMD_BB_CLK2>; + clock-names = "cec"; + + pd-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + + avdd-supply = <&pm8916_l6>; + v1p2-supply = <&pm8916_l6>; + v3p3-supply = <&pm8916_l17>; + + pinctrl-names = "default","sleep"; + pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>; + pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>; + #sound-dai-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7533_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + adv7533_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&blsp_i2c6 { + /* On Low speed expansion */ + status = "okay"; + label = "LS-I2C1"; +}; + +&blsp_spi3 { + /* On High speed expansion */ + status = "okay"; + label = "HS-SPI1"; +}; + +&blsp_spi5 { + /* On Low speed expansion */ + status = "okay"; + label = "LS-SPI0"; +}; + +&blsp1_uart1 { + status = "okay"; + label = "LS-UART0"; +}; + +&blsp1_uart2 { + status = "okay"; + label = "LS-UART1"; +}; + +&camss { + status = "okay"; + ports { + port@0 { + reg = <0>; + csiphy0_ep: endpoint { + clock-lanes = <1>; + data-lanes = <0 2>; + remote-endpoint = <&ov5640_ep>; + status = "okay"; + }; + }; + }; +}; + +&cci { + status = "okay"; +}; + +&cci_i2c0 { + camera_rear@3b { + compatible = "ovti,ov5640"; + reg = <0x3b>; + + enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>; + reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&camera_rear_default>; + + clocks = <&gcc GCC_CAMSS_MCLK0_CLK>; + clock-names = "xclk"; + clock-frequency = <23880000>; + + vdddo-supply = <&camera_vdddo_1v8>; + vdda-supply = <&camera_vdda_2v8>; + vddd-supply = <&camera_vddd_1v5>; + + /* No camera mezzanine by default */ + status = "disabled"; + + port { + ov5640_ep: endpoint { + clock-lanes = <1>; + data-lanes = <0 2>; + remote-endpoint = <&csiphy0_ep>; + }; + }; + }; +}; + +&dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&adv7533_in>; +}; + +&lpass { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mpss { + status = "okay"; + + firmware-name = "qcom/apq8016/mba.mbn", "qcom/apq8016/modem.mbn"; +}; + +&pm8916_resin { + status = "okay"; + linux,code = <KEY_VOLUMEDOWN>; +}; + +&pronto { + status = "okay"; + + firmware-name = "qcom/apq8016/wcnss.mbn"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; +}; + +&sound { + status = "okay"; + + pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>; + pinctrl-names = "default", "sleep"; + qcom,model = "DB410c"; + qcom,audio-routing = + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + + external-dai-link@0 { + link-name = "ADV7533"; + cpu { + sound-dai = <&lpass MI2S_QUATERNARY>; + }; + codec { + sound-dai = <&adv_bridge 0>; + }; + }; + + internal-codec-playback-dai-link@0 { + link-name = "WCD"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + internal-codec-capture-dai-link@0 { + link-name = "WCD-Capture"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; + +&usb { + status = "okay"; + extcon = <&usb_id>, <&usb_id>; + + pinctrl-names = "default", "device"; + pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>; + pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&wcd_codec { + clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "mclk"; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; +}; + +&wcnss_ctrl { + firmware-name = "qcom/apq8016/WCNSS_qcom_wlan_nv_sbc.bin"; +}; + +/* Enable CoreSight */ +&cti0 { status = "okay"; }; +&cti1 { status = "okay"; }; +&cti12 { status = "okay"; }; +&cti13 { status = "okay"; }; +&cti14 { status = "okay"; }; +&cti15 { status = "okay"; }; +&debug0 { status = "okay"; }; +&debug1 { status = "okay"; }; +&debug2 { status = "okay"; }; +&debug3 { status = "okay"; }; +&etf { status = "okay"; }; +&etm0 { status = "okay"; }; +&etm1 { status = "okay"; }; +&etm2 { status = "okay"; }; +&etm3 { status = "okay"; }; +&etr { status = "okay"; }; +&funnel0 { status = "okay"; }; +&funnel1 { status = "okay"; }; +&replicator { status = "okay"; }; +&stm { status = "okay"; }; +&tpiu { status = "okay"; }; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <375000>; + regulator-max-microvolt = <1562000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + }; + + l1 { + regulator-min-microvolt = <375000>; + regulator-max-microvolt = <1525000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l5 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l8 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l9 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l10 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l11 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l13 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l14 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + /** + * 1.8v required on LS expansion + * for mezzanine boards + */ + l15 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + regulator-always-on; + }; + + l16 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l17 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l18 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; +}; + +/* + * 2mA drive strength is not enough when connecting multiple + * I2C devices with different pull up resistors. + */ +&i2c2_default { + drive-strength = <16>; +}; + +&i2c4_default { + drive-strength = <16>; +}; + +&i2c6_default { + drive-strength = <16>; +}; + +/* + * GPIO name legend: proper name = the GPIO line is used as GPIO + * NC = not connected (pin out but not routed from the chip to + * anything the board) + * "[PER]" = pin is muxed for [peripheral] (not GPIO) + * LSEC = Low Speed External Connector + * HSEC = High Speed External Connector + * + * Line names are taken from the schematic "DragonBoard410c" + * dated monday, august 31, 2015. Page 5 in particular. + * + * For the lines routed to the external connectors the + * lines are named after the 96Boards CE Specification 1.0, + * Appendix "Expansion Connector Signal Description". + * + * When the 96Board naming of a line and the schematic name of + * the same line are in conflict, the 96Board specification + * takes precedence, which means that the external UART on the + * LSEC is named UART0 while the schematic and SoC names this + * UART3. This is only for the informational lines i.e. "[FOO]", + * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only + * ones actually used for GPIO. + */ + +&msmgpio { + gpio-line-names = + "[UART0_TX]", /* GPIO_0, LSEC pin 5 */ + "[UART0_RX]", /* GPIO_1, LSEC pin 7 */ + "[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */ + "[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */ + "[UART1_TX]", /* GPIO_4, LSEC pin 11 */ + "[UART1_RX]", /* GPIO_5, LSEC pin 13 */ + "[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */ + "[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */ + "[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */ + "[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */ + "[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */ + "[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */ + "GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */ + "GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */ + "[I2C3_SDA]", /* HSEC pin 38 */ + "[I2C3_SCL]", /* HSEC pin 36 */ + "[SPI0_MOSI]", /* LSEC pin 14 */ + "[SPI0_MISO]", /* LSEC pin 10 */ + "[SPI0_CS_N]", /* LSEC pin 12 */ + "[SPI0_CLK]", /* LSEC pin 8 */ + "HDMI_HPD_N", /* GPIO 20 */ + "USR_LED_1_CTRL", + "[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */ + "[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */ + "GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */ + "GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */ + "[CSI0_MCLK]", /* HSEC pin 15 */ + "[CSI1_MCLK]", /* HSEC pin 17 */ + "GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */ + "[I2C2_SDA]", /* HSEC pin 34 */ + "[I2C2_SCL]", /* HSEC pin 32 */ + "DSI2HDMI_INT_N", + "DSI_SW_SEL_APQ", + "GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */ + "GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */ + "GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */ + "GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */ + "FORCED_USB_BOOT", + "SD_CARD_DET_N", + "[WCSS_BT_SSBI]", + "[WCSS_WLAN_DATA_2]", /* GPIO 40 */ + "[WCSS_WLAN_DATA_1]", + "[WCSS_WLAN_DATA_0]", + "[WCSS_WLAN_SET]", + "[WCSS_WLAN_CLK]", + "[WCSS_FM_SSBI]", + "[WCSS_FM_SDI]", + "[WCSS_BT_DAT_CTL]", + "[WCSS_BT_DAT_STB]", + "NC", + "NC", /* GPIO 50 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", /* GPIO 60 */ + "NC", + "NC", + "[CDC_PDM0_CLK]", + "[CDC_PDM0_SYNC]", + "[CDC_PDM0_TX0]", + "[CDC_PDM0_RX0]", + "[CDC_PDM0_RX1]", + "[CDC_PDM0_RX2]", + "GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */ + "NC", /* GPIO 70 */ + "NC", + "NC", + "NC", + "NC", /* GPIO 74 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "BOOT_CONFIG_0", /* GPIO 80 */ + "BOOT_CONFIG_1", + "BOOT_CONFIG_2", + "BOOT_CONFIG_3", + "NC", + "NC", + "BOOT_CONFIG_5", + "NC", + "NC", + "NC", + "NC", /* GPIO 90 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", /* GPIO 100 */ + "NC", + "NC", + "NC", + "SSBI_GPS", + "NC", + "NC", + "KEY_VOLP_N", + "NC", + "NC", + "[LS_EXP_MI2S_WS]", /* GPIO 110 */ + "NC", + "NC", + "[LS_EXP_MI2S_SCK]", + "[LS_EXP_MI2S_DATA0]", + "GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */ + "NC", + "[DSI2HDMI_MI2S_WS]", + "[DSI2HDMI_MI2S_SCK]", + "[DSI2HDMI_MI2S_DATA0]", + "USR_LED_2_CTRL", /* GPIO 120 */ + "SB_HS_ID"; + + msmgpio_leds: msmgpio-leds { + pins = "gpio21", "gpio120"; + function = "gpio"; + + output-low; + }; + + usb_id_default: usb-id-default { + pins = "gpio121"; + function = "gpio"; + + drive-strength = <8>; + input-enable; + bias-pull-up; + }; + + adv7533_int_active: adv533-int-active { + pins = "gpio31"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + }; + + adv7533_int_suspend: adv7533-int-suspend { + pins = "gpio31"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + adv7533_switch_active: adv7533-switch-active { + pins = "gpio32"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + }; + + adv7533_switch_suspend: adv7533-switch-suspend { + pins = "gpio32"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + msm_key_volp_n_default: msm-key-volp-n-default { + pins = "gpio107"; + function = "gpio"; + + drive-strength = <8>; + input-enable; + bias-pull-up; + }; +}; + +&pm8916_gpios { + gpio-line-names = + "USR_LED_3_CTRL", + "USR_LED_4_CTRL", + "USB_HUB_RESET_N_PM", + "USB_SW_SEL_PM"; + + usb_hub_reset_pm: usb-hub-reset-pm { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + + input-disable; + output-high; + }; + + usb_hub_reset_pm_device: usb-hub-reset-pm-device { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + + output-low; + }; + + usb_sw_sel_pm: usb-sw-sel-pm { + pins = "gpio4"; + function = PMIC_GPIO_FUNC_NORMAL; + + power-source = <PM8916_GPIO_VPH>; + input-disable; + output-high; + }; + + usb_sw_sel_pm_device: usb-sw-sel-pm-device { + pins = "gpio4"; + function = PMIC_GPIO_FUNC_NORMAL; + + power-source = <PM8916_GPIO_VPH>; + input-disable; + output-low; + }; + + pm8916_gpios_leds: pm8916-gpios-leds { + pins = "gpio1", "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + + output-low; + }; +}; + +&pm8916_mpps { + gpio-line-names = + "VDD_PX_BIAS", + "WLAN_LED_CTRL", + "BT_LED_CTRL", + "GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */ + + pinctrl-names = "default"; + pinctrl-0 = <&ls_exp_gpio_f>; + + ls_exp_gpio_f: pm8916-mpp4-state { + pins = "mpp4"; + function = "digital"; + + output-low; + power-source = <PM8916_MPP_L5>; // 1.8V + }; + + pm8916_mpps_leds: pm8916-mpps-state { + pins = "mpp2", "mpp3"; + function = "digital"; + + output-low; + }; }; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi deleted file mode 100644 index f8d8f3e3664e..000000000000 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ /dev/null @@ -1,826 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2015, The Linux Foundation. All rights reserved. - */ - -#include "msm8916-pm8916.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> -#include <dt-bindings/pinctrl/qcom,pmic-mpp.h> -#include <dt-bindings/sound/apq8016-lpass.h> - -/ { - aliases { - serial0 = &blsp1_uart2; - serial1 = &blsp1_uart1; - usid0 = &pm8916_0; - i2c0 = &blsp_i2c2; - i2c1 = &blsp_i2c6; - i2c3 = &blsp_i2c4; - spi0 = &blsp_spi5; - spi1 = &blsp_spi3; - }; - - chosen { - stdout-path = "serial0"; - }; - - camera_vdddo_1v8: camera-vdddo-1v8 { - compatible = "regulator-fixed"; - regulator-name = "camera_vdddo"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - camera_vdda_2v8: camera-vdda-2v8 { - compatible = "regulator-fixed"; - regulator-name = "camera_vdda"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - camera_vddd_1v5: camera-vddd-1v5 { - compatible = "regulator-fixed"; - regulator-name = "camera_vddd"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - }; - - reserved-memory { - ramoops@bff00000 { - compatible = "ramoops"; - reg = <0x0 0xbff00000 0x0 0x100000>; - - record-size = <0x20000>; - console-size = <0x20000>; - ftrace-size = <0x20000>; - }; - }; - - usb2513 { - compatible = "smsc,usb3503"; - reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>; - initial-mode = <1>; - }; - - usb_id: usb-id { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb_id_default>; - }; - - hdmi-out { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con: endpoint { - remote-endpoint = <&adv7533_out>; - }; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - autorepeat; - - pinctrl-names = "default"; - pinctrl-0 = <&msm_key_volp_n_default>; - - button@0 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; - }; - }; - - leds { - pinctrl-names = "default"; - pinctrl-0 = <&msmgpio_leds>, - <&pm8916_gpios_leds>, - <&pm8916_mpps_leds>; - - compatible = "gpio-leds"; - - led@1 { - label = "apq8016-sbc:green:user1"; - gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; - - led@2 { - label = "apq8016-sbc:green:user2"; - gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - default-state = "off"; - }; - - led@3 { - label = "apq8016-sbc:green:user3"; - gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc1"; - default-state = "off"; - }; - - led@4 { - label = "apq8016-sbc:green:user4"; - gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "none"; - panic-indicator; - default-state = "off"; - }; - - led@5 { - label = "apq8016-sbc:yellow:wlan"; - gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tx"; - default-state = "off"; - }; - - led@6 { - label = "apq8016-sbc:blue:bt"; - gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "bluetooth-power"; - default-state = "off"; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp_i2c2 { - /* On Low speed expansion */ - status = "okay"; - label = "LS-I2C0"; -}; - -&blsp_i2c4 { - /* On High speed expansion */ - status = "okay"; - label = "HS-I2C2"; - - adv_bridge: bridge@39 { - status = "okay"; - - compatible = "adi,adv7533"; - reg = <0x39>; - - interrupt-parent = <&msmgpio>; - interrupts = <31 IRQ_TYPE_EDGE_FALLING>; - - adi,dsi-lanes = <4>; - clocks = <&rpmcc RPM_SMD_BB_CLK2>; - clock-names = "cec"; - - pd-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; - - avdd-supply = <&pm8916_l6>; - v1p2-supply = <&pm8916_l6>; - v3p3-supply = <&pm8916_l17>; - - pinctrl-names = "default","sleep"; - pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>; - pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>; - #sound-dai-cells = <1>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7533_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - - port@1 { - reg = <1>; - adv7533_out: endpoint { - remote-endpoint = <&hdmi_con>; - }; - }; - }; - }; -}; - -&blsp_i2c6 { - /* On Low speed expansion */ - status = "okay"; - label = "LS-I2C1"; -}; - -&blsp_spi3 { - /* On High speed expansion */ - status = "okay"; - label = "HS-SPI1"; -}; - -&blsp_spi5 { - /* On Low speed expansion */ - status = "okay"; - label = "LS-SPI0"; -}; - -&blsp1_uart1 { - status = "okay"; - label = "LS-UART0"; -}; - -&blsp1_uart2 { - status = "okay"; - label = "LS-UART1"; -}; - -&camss { - status = "okay"; - ports { - port@0 { - reg = <0>; - csiphy0_ep: endpoint { - clock-lanes = <1>; - data-lanes = <0 2>; - remote-endpoint = <&ov5640_ep>; - status = "okay"; - }; - }; - }; -}; - -&cci { - status = "okay"; -}; - -&cci_i2c0 { - camera_rear@3b { - compatible = "ovti,ov5640"; - reg = <0x3b>; - - enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>; - reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&camera_rear_default>; - - clocks = <&gcc GCC_CAMSS_MCLK0_CLK>; - clock-names = "xclk"; - clock-frequency = <23880000>; - - vdddo-supply = <&camera_vdddo_1v8>; - vdda-supply = <&camera_vdda_2v8>; - vddd-supply = <&camera_vddd_1v5>; - - /* No camera mezzanine by default */ - status = "disabled"; - - port { - ov5640_ep: endpoint { - clock-lanes = <1>; - data-lanes = <0 2>; - remote-endpoint = <&csiphy0_ep>; - }; - }; - }; -}; - -&dsi0_out { - data-lanes = <0 1 2 3>; - remote-endpoint = <&adv7533_in>; -}; - -&lpass { - status = "okay"; -}; - -&mdss { - status = "okay"; -}; - -&pm8916_resin { - status = "okay"; - linux,code = <KEY_VOLUMEDOWN>; -}; - -&pronto { - status = "okay"; -}; - -&sdhc_1 { - status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; -}; - -&sdhc_2 { - status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; - - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; -}; - -&sound { - status = "okay"; - - pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>; - pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>; - pinctrl-names = "default", "sleep"; - qcom,model = "DB410c"; - qcom,audio-routing = - "AMIC2", "MIC BIAS Internal2", - "AMIC3", "MIC BIAS External1"; - - external-dai-link@0 { - link-name = "ADV7533"; - cpu { - sound-dai = <&lpass MI2S_QUATERNARY>; - }; - codec { - sound-dai = <&adv_bridge 0>; - }; - }; - - internal-codec-playback-dai-link@0 { - link-name = "WCD"; - cpu { - sound-dai = <&lpass MI2S_PRIMARY>; - }; - codec { - sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; - }; - }; - - internal-codec-capture-dai-link@0 { - link-name = "WCD-Capture"; - cpu { - sound-dai = <&lpass MI2S_TERTIARY>; - }; - codec { - sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; - }; - }; -}; - -&usb { - status = "okay"; - extcon = <&usb_id>, <&usb_id>; - - pinctrl-names = "default", "device"; - pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>; - pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>; -}; - -&usb_hs_phy { - extcon = <&usb_id>; -}; - -&wcd_codec { - clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; - clock-names = "mclk"; - qcom,mbhc-vthreshold-low = <75 150 237 450 500>; - qcom,mbhc-vthreshold-high = <75 150 237 450 500>; -}; - -/* Enable CoreSight */ -&cti0 { status = "okay"; }; -&cti1 { status = "okay"; }; -&cti12 { status = "okay"; }; -&cti13 { status = "okay"; }; -&cti14 { status = "okay"; }; -&cti15 { status = "okay"; }; -&debug0 { status = "okay"; }; -&debug1 { status = "okay"; }; -&debug2 { status = "okay"; }; -&debug3 { status = "okay"; }; -&etf { status = "okay"; }; -&etm0 { status = "okay"; }; -&etm1 { status = "okay"; }; -&etm2 { status = "okay"; }; -&etm3 { status = "okay"; }; -&etr { status = "okay"; }; -&funnel0 { status = "okay"; }; -&funnel1 { status = "okay"; }; -&replicator { status = "okay"; }; -&stm { status = "okay"; }; -&tpiu { status = "okay"; }; - -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <375000>; - regulator-max-microvolt = <1562000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l1 { - regulator-min-microvolt = <375000>; - regulator-max-microvolt = <1525000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l5 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l8 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l9 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l10 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l11 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l13 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l14 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - /** - * 1.8v required on LS expansion - * for mezzanine boards - */ - l15 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - regulator-always-on; - }; - - l16 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l17 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l18 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; -}; - -/* - * 2mA drive strength is not enough when connecting multiple - * I2C devices with different pull up resistors. - */ -&i2c2_default { - drive-strength = <16>; -}; - -&i2c4_default { - drive-strength = <16>; -}; - -&i2c6_default { - drive-strength = <16>; -}; - -/* - * GPIO name legend: proper name = the GPIO line is used as GPIO - * NC = not connected (pin out but not routed from the chip to - * anything the board) - * "[PER]" = pin is muxed for [peripheral] (not GPIO) - * LSEC = Low Speed External Connector - * HSEC = High Speed External Connector - * - * Line names are taken from the schematic "DragonBoard410c" - * dated monday, august 31, 2015. Page 5 in particular. - * - * For the lines routed to the external connectors the - * lines are named after the 96Boards CE Specification 1.0, - * Appendix "Expansion Connector Signal Description". - * - * When the 96Board naming of a line and the schematic name of - * the same line are in conflict, the 96Board specification - * takes precedence, which means that the external UART on the - * LSEC is named UART0 while the schematic and SoC names this - * UART3. This is only for the informational lines i.e. "[FOO]", - * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only - * ones actually used for GPIO. - */ - -&msmgpio { - gpio-line-names = - "[UART0_TX]", /* GPIO_0, LSEC pin 5 */ - "[UART0_RX]", /* GPIO_1, LSEC pin 7 */ - "[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */ - "[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */ - "[UART1_TX]", /* GPIO_4, LSEC pin 11 */ - "[UART1_RX]", /* GPIO_5, LSEC pin 13 */ - "[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */ - "[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */ - "[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */ - "[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */ - "[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */ - "[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */ - "GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */ - "GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */ - "[I2C3_SDA]", /* HSEC pin 38 */ - "[I2C3_SCL]", /* HSEC pin 36 */ - "[SPI0_MOSI]", /* LSEC pin 14 */ - "[SPI0_MISO]", /* LSEC pin 10 */ - "[SPI0_CS_N]", /* LSEC pin 12 */ - "[SPI0_CLK]", /* LSEC pin 8 */ - "HDMI_HPD_N", /* GPIO 20 */ - "USR_LED_1_CTRL", - "[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */ - "[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */ - "GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */ - "GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */ - "[CSI0_MCLK]", /* HSEC pin 15 */ - "[CSI1_MCLK]", /* HSEC pin 17 */ - "GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */ - "[I2C2_SDA]", /* HSEC pin 34 */ - "[I2C2_SCL]", /* HSEC pin 32 */ - "DSI2HDMI_INT_N", - "DSI_SW_SEL_APQ", - "GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */ - "GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */ - "GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */ - "GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */ - "FORCED_USB_BOOT", - "SD_CARD_DET_N", - "[WCSS_BT_SSBI]", - "[WCSS_WLAN_DATA_2]", /* GPIO 40 */ - "[WCSS_WLAN_DATA_1]", - "[WCSS_WLAN_DATA_0]", - "[WCSS_WLAN_SET]", - "[WCSS_WLAN_CLK]", - "[WCSS_FM_SSBI]", - "[WCSS_FM_SDI]", - "[WCSS_BT_DAT_CTL]", - "[WCSS_BT_DAT_STB]", - "NC", - "NC", /* GPIO 50 */ - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", /* GPIO 60 */ - "NC", - "NC", - "[CDC_PDM0_CLK]", - "[CDC_PDM0_SYNC]", - "[CDC_PDM0_TX0]", - "[CDC_PDM0_RX0]", - "[CDC_PDM0_RX1]", - "[CDC_PDM0_RX2]", - "GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */ - "NC", /* GPIO 70 */ - "NC", - "NC", - "NC", - "NC", /* GPIO 74 */ - "NC", - "NC", - "NC", - "NC", - "NC", - "BOOT_CONFIG_0", /* GPIO 80 */ - "BOOT_CONFIG_1", - "BOOT_CONFIG_2", - "BOOT_CONFIG_3", - "NC", - "NC", - "BOOT_CONFIG_5", - "NC", - "NC", - "NC", - "NC", /* GPIO 90 */ - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", /* GPIO 100 */ - "NC", - "NC", - "NC", - "SSBI_GPS", - "NC", - "NC", - "KEY_VOLP_N", - "NC", - "NC", - "[LS_EXP_MI2S_WS]", /* GPIO 110 */ - "NC", - "NC", - "[LS_EXP_MI2S_SCK]", - "[LS_EXP_MI2S_DATA0]", - "GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */ - "NC", - "[DSI2HDMI_MI2S_WS]", - "[DSI2HDMI_MI2S_SCK]", - "[DSI2HDMI_MI2S_DATA0]", - "USR_LED_2_CTRL", /* GPIO 120 */ - "SB_HS_ID"; - - msmgpio_leds: msmgpio-leds { - pins = "gpio21", "gpio120"; - function = "gpio"; - - output-low; - }; - - usb_id_default: usb-id-default { - pins = "gpio121"; - function = "gpio"; - - drive-strength = <8>; - input-enable; - bias-pull-up; - }; - - adv7533_int_active: adv533-int-active { - pins = "gpio31"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - }; - - adv7533_int_suspend: adv7533-int-suspend { - pins = "gpio31"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - adv7533_switch_active: adv7533-switch-active { - pins = "gpio32"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - }; - - adv7533_switch_suspend: adv7533-switch-suspend { - pins = "gpio32"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - msm_key_volp_n_default: msm-key-volp-n-default { - pins = "gpio107"; - function = "gpio"; - - drive-strength = <8>; - input-enable; - bias-pull-up; - }; -}; - -&pm8916_gpios { - gpio-line-names = - "USR_LED_3_CTRL", - "USR_LED_4_CTRL", - "USB_HUB_RESET_N_PM", - "USB_SW_SEL_PM"; - - usb_hub_reset_pm: usb-hub-reset-pm { - pins = "gpio3"; - function = PMIC_GPIO_FUNC_NORMAL; - - input-disable; - output-high; - }; - - usb_hub_reset_pm_device: usb-hub-reset-pm-device { - pins = "gpio3"; - function = PMIC_GPIO_FUNC_NORMAL; - - output-low; - }; - - usb_sw_sel_pm: usb-sw-sel-pm { - pins = "gpio4"; - function = PMIC_GPIO_FUNC_NORMAL; - - power-source = <PM8916_GPIO_VPH>; - input-disable; - output-high; - }; - - usb_sw_sel_pm_device: usb-sw-sel-pm-device { - pins = "gpio4"; - function = PMIC_GPIO_FUNC_NORMAL; - - power-source = <PM8916_GPIO_VPH>; - input-disable; - output-low; - }; - - pm8916_gpios_leds: pm8916-gpios-leds { - pins = "gpio1", "gpio2"; - function = PMIC_GPIO_FUNC_NORMAL; - - output-low; - }; -}; - -&pm8916_mpps { - gpio-line-names = - "VDD_PX_BIAS", - "WLAN_LED_CTRL", - "BT_LED_CTRL", - "GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */ - - pinctrl-names = "default"; - pinctrl-0 = <&ls_exp_gpio_f>; - - ls_exp_gpio_f: pm8916-mpp4 { - pins = "mpp4"; - function = "digital"; - - output-low; - power-source = <PM8916_MPP_L5>; // 1.8V - }; - - pm8916_mpps_leds: pm8916-mpps-leds { - pins = "mpp2", "mpp3"; - function = "digital"; - - output-low; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts b/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts index a8dffc8c64ea..314d2dc4726a 100644 --- a/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts +++ b/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts @@ -11,6 +11,7 @@ / { model = "Sony Xperia Z4 Tablet (Wi-Fi)"; compatible = "sony,karin_windy", "qcom,apq8094"; + chassis-type = "tablet"; /* * This model uses the APQ variant of MSM8994 (APQ8094). diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index 757afa27424d..d01a512634cf 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -5,9 +5,1077 @@ /dts-v1/; -#include "apq8096-db820c.dtsi" +#include "msm8996.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> + +/* + * GPIO name legend: proper name = the GPIO line is used as GPIO + * NC = not connected (pin out but not routed from the chip to + * anything the board) + * "[PER]" = pin is muxed for [peripheral] (not GPIO) + * LSEC = Low Speed External Connector + * P HSEC = Primary High Speed External Connector + * S HSEC = Secondary High Speed External Connector + * J14 = Camera Connector + * TP = Test Points + * + * Line names are taken from the schematic "DragonBoard 820c", + * drawing no: LM25-P2751-1 + * + * For the lines routed to the external connectors the + * lines are named after the 96Boards CE Specification 1.0, + * Appendix "Expansion Connector Signal Description". + * + * When the 96Board naming of a line and the schematic name of + * the same line are in conflict, the 96Board specification + * takes precedence, which means that the external UART on the + * LSEC is named UART0 while the schematic and SoC names this + * UART3. This is only for the informational lines i.e. "[FOO]", + * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only + * ones actually used for GPIO. + */ / { model = "Qualcomm Technologies, Inc. DB820c"; compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096"; + + aliases { + serial0 = &blsp2_uart2; + serial1 = &blsp2_uart3; + serial2 = &blsp1_uart2; + i2c0 = &blsp1_i2c3; + i2c1 = &blsp2_i2c1; + i2c2 = &blsp2_i2c1; + spi0 = &blsp1_spi1; + spi1 = &blsp2_spi6; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + clocks { + compatible = "simple-bus"; + divclk4: divclk4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "divclk4"; + + pinctrl-names = "default"; + pinctrl-0 = <&divclk4_pin_a>; + }; + + div1_mclk: divclk1 { + compatible = "gpio-gate-clock"; + pinctrl-0 = <&audio_mclk>; + pinctrl-names = "default"; + clocks = <&rpmcc RPM_SMD_DIV_CLK1>; + #clock-cells = <0>; + enable-gpios = <&pm8994_gpios 15 0>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&volume_up_gpio>; + + button@0 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; + }; + }; + + usb2_id: usb2-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb2_vbus_det_gpio>; + }; + + usb3_id: usb3-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_vbus_det_gpio>; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + wlan_en: wlan-en-1-8v { + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en_gpios>; + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8994_gpios 8 0>; + + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + }; +}; + +&blsp1_i2c3 { + /* On Low speed expansion */ + label = "LS-I2C0"; + status = "okay"; +}; + +&blsp1_spi1 { + /* On Low speed expansion */ + label = "LS-SPI0"; + status = "okay"; +}; + +&blsp1_uart2 { + label = "BT-UART"; + status = "okay"; + + bluetooth { + compatible = "qcom,qca6174-bt"; + + /* bt_disable_n gpio */ + enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; + + clocks = <&divclk4>; + }; +}; + +&adsp_pil { + status = "okay"; +}; + +&blsp2_i2c1 { + /* On High speed expansion */ + label = "HS-I2C2"; + status = "okay"; +}; + +&blsp2_i2c1 { + /* On Low speed expansion */ + label = "LS-I2C1"; + status = "okay"; +}; + +&blsp2_spi6 { + /* On High speed expansion */ + label = "HS-SPI1"; + status = "okay"; +}; + +&blsp2_uart2 { + label = "LS-UART1"; + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart2_2pins_default>; + pinctrl-1 = <&blsp2_uart2_2pins_sleep>; +}; + +&blsp2_uart3 { + label = "LS-UART0"; + status = "disabled"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart3_4pins_default>; + pinctrl-1 = <&blsp2_uart3_4pins_sleep>; +}; + +&camss { + vdda-supply = <&vreg_l2a_1p25>; +}; + +&gpu { + status = "okay"; +}; + +&hdmi { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>; + pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>; + + core-vdda-supply = <&vreg_l12a_1p8>; + core-vcc-supply = <&vreg_s4a_1p8>; +}; + +&hdmi_phy { + status = "okay"; + + vddio-supply = <&vreg_l12a_1p8>; + vcca-supply = <&vreg_l28a_0p925>; + #phy-cells = <0>; +}; + +&hsusb_phy1 { + status = "okay"; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&hsusb_phy2 { + status = "okay"; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&mdp { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mmcc { + vdd-gfx-supply = <&vdd_gfx>; +}; + +&pm8994_resin { + status = "okay"; + linux,code = <KEY_VOLUMEDOWN>; +}; + +&tlmm { + gpio-line-names = + "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */ + "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */ + "[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */ + "[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */ + "[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */ + "[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */ + "[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */ + "[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */ + "GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */ + "TP93", /* GPIO_9 */ + "GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */ + "[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */ + "NC", /* GPIO_12 */ + "[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */ + "[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */ + "[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */ + "TP99", /* GPIO_16 */ + "[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */ + "[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */ + "[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */ + "[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */ + "FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */ + "FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */ + "GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */ + "GPIO-D", /* GPIO_24, LSEC pin 26 */ + "GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */ + "GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */ + "BLSP6_I2C_SDA", /* GPIO_27 */ + "BLSP6_I2C_SCL", /* GPIO_28 */ + "GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */ + "GPIO30", /* GPIO_30, S HSEC pin 4 */ + "HDMI_CEC", /* GPIO_31 */ + "HDMI_DDC_CLOCK", /* GPIO_32 */ + "HDMI_DDC_DATA", /* GPIO_33 */ + "HDMI_HOT_PLUG_DETECT", /* GPIO_34 */ + "PCIE0_RST_N", /* GPIO_35 */ + "PCIE0_CLKREQ_N", /* GPIO_36 */ + "PCIE0_WAKE", /* GPIO_37 */ + "SD_CARD_DET_N", /* GPIO_38 */ + "TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */ + "W_DISABLE_N", /* GPIO_40 */ + "[BLSP9_UART_TX]", /* GPIO_41 */ + "[BLSP9_UART_RX]", /* GPIO_42 */ + "[BLSP2_UART_CTS_N]", /* GPIO_43 */ + "[BLSP2_UART_RFR_N]", /* GPIO_44 */ + "[BLSP3_UART_TX]", /* GPIO_45 */ + "[BLSP3_UART_RX]", /* GPIO_46 */ + "[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */ + "[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */ + "[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */ + "[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */ + "[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */ + "[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */ + "[CODEC_INT1_N]", /* GPIO_53 */ + "[CODEC_INT2_N]", /* GPIO_54 */ + "[BLSP7_I2C_SDA]", /* GPIO_55 */ + "[BLSP7_I2C_SCL]", /* GPIO_56 */ + "MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */ + "[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */ + "[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */ + "[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */ + "[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */ + "GPIO-E", /* GPIO_62, LSEC pin 27 */ + "TP87", /* GPIO_63 */ + "[CODEC_RST_N]", /* GPIO_64 */ + "[PCM1_CLK]", /* GPIO_65 */ + "[PCM1_SYNC]", /* GPIO_66 */ + "[PCM1_DIN]", /* GPIO_67 */ + "[PCM1_DOUT]", /* GPIO_68 */ + "AUDIO_REF_CLK", /* GPIO_69 */ + "SLIMBUS_CLK", /* GPIO_70 */ + "SLIMBUS_DATA0", /* GPIO_71 */ + "SLIMBUS_DATA1", /* GPIO_72 */ + "NC", /* GPIO_73 */ + "NC", /* GPIO_74 */ + "NC", /* GPIO_75 */ + "NC", /* GPIO_76 */ + "TP94", /* GPIO_77 */ + "NC", /* GPIO_78 */ + "TP95", /* GPIO_79 */ + "GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */ + "TP88", /* GPIO_81 */ + "TP89", /* GPIO_82 */ + "TP90", /* GPIO_83 */ + "TP91", /* GPIO_84 */ + "[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */ + "[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */ + "[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */ + "[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */ + "TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */ + "TSIF1_EN", /* GPIO_90, S HSEC pin 46 */ + "TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */ + "NC", /* GPIO_92 */ + "TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */ + "TSIF2_EN", /* GPIO_94, S HSEC pin 56 */ + "TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */ + "TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */ + "NC", /* GPIO_97 */ + "CAM1_STANDBY_N", /* GPIO_98 */ + "NC", /* GPIO_99 */ + "NC", /* GPIO_100 */ + "[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */ + "BOOT_CONFIG1", /* GPIO_102 */ + "USB_HUB_RESET", /* GPIO_103 */ + "CAM1_RST_N", /* GPIO_104 */ + "NC", /* GPIO_105 */ + "NC", /* GPIO_106 */ + "NC", /* GPIO_107 */ + "NC", /* GPIO_108 */ + "NC", /* GPIO_109 */ + "NC", /* GPIO_110 */ + "NC", /* GPIO_111 */ + "NC", /* GPIO_112 */ + "PMI8994_BUA", /* GPIO_113 */ + "PCIE2_RST_N", /* GPIO_114 */ + "PCIE2_CLKREQ_N", /* GPIO_115 */ + "PCIE2_WAKE", /* GPIO_116 */ + "SSC_IRQ_0", /* GPIO_117 */ + "SSC_IRQ_1", /* GPIO_118 */ + "SSC_IRQ_2", /* GPIO_119 */ + "NC", /* GPIO_120 */ + "GPIO121", /* GPIO_121, S HSEC pin 2 */ + "NC", /* GPIO_122 */ + "SSC_IRQ_6", /* GPIO_123 */ + "SSC_IRQ_7", /* GPIO_124 */ + "GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */ + "BOOT_CONFIG5", /* GPIO_126 */ + "NC", /* GPIO_127 */ + "NC", /* GPIO_128 */ + "BOOT_CONFIG7", /* GPIO_129 */ + "PCIE1_RST_N", /* GPIO_130 */ + "PCIE1_CLKREQ_N", /* GPIO_131 */ + "PCIE1_WAKE", /* GPIO_132 */ + "GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */ + "NC", /* GPIO_134 */ + "NC", /* GPIO_135 */ + "BOOT_CONFIG8", /* GPIO_136 */ + "NC", /* GPIO_137 */ + "NC", /* GPIO_138 */ + "GPS_SSBI2", /* GPIO_139 */ + "GPS_SSBI1", /* GPIO_140 */ + "NC", /* GPIO_141 */ + "NC", /* GPIO_142 */ + "NC", /* GPIO_143 */ + "BOOT_CONFIG6", /* GPIO_144 */ + "NC", /* GPIO_145 */ + "NC", /* GPIO_146 */ + "NC", /* GPIO_147 */ + "NC", /* GPIO_148 */ + "NC"; /* GPIO_149 */ + + sdc2_cd_on: sdc2_cd_on { + mux { + pins = "gpio38"; + function = "gpio"; + }; + + config { + pins = "gpio38"; + bias-pull-up; /* pull up */ + drive-strength = <16>; /* 16 MA */ + }; + }; + + sdc2_cd_off: sdc2_cd_off { + mux { + pins = "gpio38"; + function = "gpio"; + }; + + config { + pins = "gpio38"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + hdmi_hpd_active: hdmi_hpd_active { + mux { + pins = "gpio34"; + function = "hdmi_hot"; + }; + + config { + pins = "gpio34"; + bias-pull-down; + drive-strength = <16>; + }; + }; + + hdmi_hpd_suspend: hdmi_hpd_suspend { + mux { + pins = "gpio34"; + function = "hdmi_hot"; + }; + + config { + pins = "gpio34"; + bias-pull-down; + drive-strength = <2>; + }; + }; + + hdmi_ddc_active: hdmi_ddc_active { + mux { + pins = "gpio32", "gpio33"; + function = "hdmi_ddc"; + }; + + config { + pins = "gpio32", "gpio33"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + hdmi_ddc_suspend: hdmi_ddc_suspend { + mux { + pins = "gpio32", "gpio33"; + function = "hdmi_ddc"; + }; + + config { + pins = "gpio32", "gpio33"; + drive-strength = <2>; + bias-pull-down; + }; + }; +}; + +&pcie0 { + status = "okay"; + perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; + vddpe-3v3-supply = <&wlan_en>; + vdda-supply = <&vreg_l28a_0p925>; +}; + +&pcie1 { + status = "okay"; + perst-gpio = <&tlmm 130 GPIO_ACTIVE_LOW>; + vdda-supply = <&vreg_l28a_0p925>; +}; + +&pcie2 { + status = "okay"; + perst-gpio = <&tlmm 114 GPIO_ACTIVE_LOW>; + vdda-supply = <&vreg_l28a_0p925>; +}; + +&pcie_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; +}; + +&pm8994_gpios { + gpio-line-names = + "NC", + "KEY_VOLP_N", + "NC", + "BL1_PWM", + "GPIO-F", /* BL0_PWM, LSEC pin 28 */ + "BL1_EN", + "NC", + "WLAN_EN", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "DIVCLK1", + "DIVCLK2", + "DIVCLK3", + "DIVCLK4", + "BT_EN", + "PMIC_SLB", + "PMIC_BUA", + "USB_VBUS_DET"; + + pinctrl-names = "default"; + pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>; + + ls_exp_gpio_f: pm8994_gpio5 { + pinconf { + pins = "gpio5"; + output-low; + power-source = <2>; // PM8994_GPIO_S4, 1.8V + }; + }; + + bt_en_gpios: bt_en_gpios { + pinconf { + pins = "gpio19"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + power-source = <PM8994_GPIO_S4>; // 1.8V + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + bias-pull-down; + }; + }; + + wlan_en_gpios: wlan_en_gpios { + pinconf { + pins = "gpio8"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + power-source = <PM8994_GPIO_S4>; // 1.8V + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + bias-pull-down; + }; + }; + + audio_mclk: clk_div1 { + pinconf { + pins = "gpio15"; + function = "func1"; + power-source = <PM8994_GPIO_S4>; // 1.8V + }; + }; + + volume_up_gpio: pm8996_gpio2 { + pinconf { + pins = "gpio2"; + function = "normal"; + input-enable; + drive-push-pull; + bias-pull-up; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; // 1.8V + }; + }; + + divclk4_pin_a: divclk4 { + pinconf { + pins = "gpio18"; + function = PMIC_GPIO_FUNC_FUNC2; + + bias-disable; + power-source = <PM8994_GPIO_S4>; + }; + }; + + usb3_vbus_det_gpio: pm8996_gpio22 { + pinconf { + pins = "gpio22"; + function = PMIC_GPIO_FUNC_NORMAL; + input-enable; + bias-pull-down; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; // 1.8V + }; + }; +}; + +&pm8994_mpps { + gpio-line-names = + "VDDPX_BIAS", + "WIFI_LED", + "NC", + "BT_LED", + "PM_MPP05", + "PM_MPP06", + "PM_MPP07", + "NC"; +}; + +&pm8994_spmi_regulators { + qcom,saw-reg = <&saw3>; + s9 { + qcom,saw-slave; + }; + s10 { + qcom,saw-slave; + }; + s11 { + qcom,saw-leader; + regulator-always-on; + regulator-min-microvolt = <980000>; + regulator-max-microvolt = <980000>; + }; +}; + +&pmi8994_gpios { + gpio-line-names = + "NC", + "SPKR_AMP_EN1", + "SPKR_AMP_EN2", + "TP61", + "NC", + "USB2_VBUS_DET", + "NC", + "NC", + "NC", + "NC"; + + usb2_vbus_det_gpio: pmi8996_gpio6 { + pinconf { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + input-enable; + bias-pull-down; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; // 1.8V + }; + }; +}; + +&pmi8994_spmi_regulators { + vdd_gfx: s2@1700 { + reg = <0x1700 0x100>; + regulator-name = "VDD_GFX"; + regulator-min-microvolt = <980000>; + regulator-max-microvolt = <980000>; + }; +}; + +&rpm_requests { + pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_l1-supply = <&vreg_s1b_1p025>; + vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; + vdd_l3_l11-supply = <&vreg_s3a_1p3>; + vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; + vdd_l5_l7-supply = <&vreg_s5a_2p15>; + vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; + vdd_l8_l16_l30-supply = <&vph_pwr>; + vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>; + vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>; + vdd_l14_l15-supply = <&vreg_s5a_2p15>; + vdd_l17_l29-supply = <&vph_pwr_bbyp>; + vdd_l20_l21-supply = <&vph_pwr_bbyp>; + vdd_l25-supply = <&vreg_s3a_1p3>; + vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p3: s3 { + regulator-name = "vreg_s3a_1p3"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + /** + * 1.8v required on LS expansion + * for mezzanine boards + */ + vreg_s4a_1p8: s4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + vreg_s5a_2p15: s5 { + regulator-name = "vreg_s5a_2p15"; + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + vreg_s7a_1p0: s7 { + regulator-name = "vreg_s7a_1p0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l1a_1p0: l1 { + regulator-name = "vreg_l1a_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l2a_1p25: l2 { + regulator-name = "vreg_l2a_1p25"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + vreg_l3a_0p875: l3 { + regulator-name = "vreg_l3a_0p875"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + }; + vreg_l4a_1p225: l4 { + regulator-name = "vreg_l4a_1p225"; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + vreg_l6a_1p2: l6 { + regulator-name = "vreg_l6a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l8a_1p8: l8 { + regulator-name = "vreg_l8a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l9a_1p8: l9 { + regulator-name = "vreg_l9a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l10a_1p8: l10 { + regulator-name = "vreg_l10a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l11a_1p15: l11 { + regulator-name = "vreg_l11a_1p15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + vreg_l12a_1p8: l12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l13a_2p95: l13 { + regulator-name = "vreg_l13a_2p95"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + vreg_l14a_1p8: l14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l15a_1p8: l15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l16a_2p7: l16 { + regulator-name = "vreg_l16a_2p7"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + vreg_l17a_2p8: l17 { + regulator-name = "vreg_l17a_2p8"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + vreg_l18a_2p85: l18 { + regulator-name = "vreg_l18a_2p85"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2900000>; + }; + vreg_l19a_2p8: l19 { + regulator-name = "vreg_l19a_2p8"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + vreg_l20a_2p95: l20 { + regulator-name = "vreg_l20a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + vreg_l21a_2p95: l21 { + regulator-name = "vreg_l21a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + vreg_l22a_3p0: l22 { + regulator-name = "vreg_l22a_3p0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + vreg_l23a_2p8: l23 { + regulator-name = "vreg_l23a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l24a_3p075: l24 { + regulator-name = "vreg_l24a_3p075"; + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + vreg_l25a_1p2: l25 { + regulator-name = "vreg_l25a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + vreg_l26a_0p8: l27 { + regulator-name = "vreg_l26a_0p8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l28a_0p925: l28 { + regulator-name = "vreg_l28a_0p925"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + vreg_l29a_2p8: l29 { + regulator-name = "vreg_l29a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l30a_1p8: l30 { + regulator-name = "vreg_l30a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l32a_1p8: l32 { + regulator-name = "vreg_l32a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-name = "vreg_lvs1a_1p8"; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-name = "vreg_lvs2a_1p8"; + }; + }; + + pmi8994-regulators { + compatible = "qcom,rpm-pmi8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + vph_pwr_bbyp: boost-bypass { + regulator-name = "vph_pwr_bbyp"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vreg_s1b_1p025: s1 { + regulator-name = "vreg_s1b_1p025"; + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; + }; + }; +}; + +&sdhc2 { + /* External SD card */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_state_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_state_off &sdc2_cd_off>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + status = "okay"; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + +&sound { + compatible = "qcom,apq8096-sndcard"; + model = "DB820c"; + audio-routing = "RX_BIAS", "MCLK", + "MM_DL1", "MultiMedia1 Playback", + "MM_DL2", "MultiMedia2 Playback", + "MultiMedia3 Capture", "MM_UL3"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + hdmi-dai-link { + link-name = "HDMI"; + cpu { + sound-dai = <&q6afedai HDMI_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&hdmi 0>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_6_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 6>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 1>; + }; + }; +}; + +&ufsphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vddp-ref-clk-supply = <&vreg_l25a_1p2>; +}; + +&ufshc { + status = "okay"; + + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l25a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + + vcc-max-microamp = <600000>; + vccq-max-microamp = <450000>; + vccq2-max-microamp = <450000>; +}; + +&usb2 { + status = "okay"; + extcon = <&usb2_id>; + + dwc3@7600000 { + extcon = <&usb2_id>; + dr_mode = "otg"; + maximum-speed = "high-speed"; + }; +}; + +&usb3 { + status = "okay"; + extcon = <&usb3_id>; + + dwc3@6a00000 { + extcon = <&usb3_id>; + dr_mode = "otg"; + }; +}; + +&usb3phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + +}; + +&venus { + status = "okay"; +}; + +&wcd9335 { + clock-names = "mclk", "slimbus"; + clocks = <&div1_mclk>, + <&rpmcc RPM_SMD_BB_CLK1>; + + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; }; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi deleted file mode 100644 index 51e17094d7b1..000000000000 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ /dev/null @@ -1,1105 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved. - */ - -#include "msm8996.dtsi" -#include "pm8994.dtsi" -#include "pmi8994.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> -#include <dt-bindings/sound/qcom,q6afe.h> -#include <dt-bindings/sound/qcom,q6asm.h> - -/* - * GPIO name legend: proper name = the GPIO line is used as GPIO - * NC = not connected (pin out but not routed from the chip to - * anything the board) - * "[PER]" = pin is muxed for [peripheral] (not GPIO) - * LSEC = Low Speed External Connector - * P HSEC = Primary High Speed External Connector - * S HSEC = Secondary High Speed External Connector - * J14 = Camera Connector - * TP = Test Points - * - * Line names are taken from the schematic "DragonBoard 820c", - * drawing no: LM25-P2751-1 - * - * For the lines routed to the external connectors the - * lines are named after the 96Boards CE Specification 1.0, - * Appendix "Expansion Connector Signal Description". - * - * When the 96Board naming of a line and the schematic name of - * the same line are in conflict, the 96Board specification - * takes precedence, which means that the external UART on the - * LSEC is named UART0 while the schematic and SoC names this - * UART3. This is only for the informational lines i.e. "[FOO]", - * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only - * ones actually used for GPIO. - */ - -/ { - aliases { - serial0 = &blsp2_uart2; - serial1 = &blsp2_uart3; - serial2 = &blsp1_uart2; - i2c0 = &blsp1_i2c3; - i2c1 = &blsp2_i2c1; - i2c2 = &blsp2_i2c1; - spi0 = &blsp1_spi1; - spi1 = &blsp2_spi6; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - clocks { - compatible = "simple-bus"; - divclk4: divclk4 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "divclk4"; - - pinctrl-names = "default"; - pinctrl-0 = <&divclk4_pin_a>; - }; - - div1_mclk: divclk1 { - compatible = "gpio-gate-clock"; - pinctrl-0 = <&audio_mclk>; - pinctrl-names = "default"; - clocks = <&rpmcc RPM_SMD_DIV_CLK1>; - #clock-cells = <0>; - enable-gpios = <&pm8994_gpios 15 0>; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - autorepeat; - - pinctrl-names = "default"; - pinctrl-0 = <&volume_up_gpio>; - - button@0 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; - }; - }; - - usb2_id: usb2-id { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb2_vbus_det_gpio>; - }; - - usb3_id: usb3-id { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb3_vbus_det_gpio>; - }; - - vph_pwr: vph-pwr-regulator { - compatible = "regulator-fixed"; - regulator-name = "vph_pwr"; - regulator-always-on; - regulator-boot-on; - - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - }; - - wlan_en: wlan-en-1-8v { - pinctrl-names = "default"; - pinctrl-0 = <&wlan_en_gpios>; - compatible = "regulator-fixed"; - regulator-name = "wlan-en-regulator"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - gpio = <&pm8994_gpios 8 0>; - - /* WLAN card specific delay */ - startup-delay-us = <70000>; - enable-active-high; - }; -}; - -&blsp1_i2c3 { - /* On Low speed expansion */ - label = "LS-I2C0"; - status = "okay"; -}; - -&blsp1_spi1 { - /* On Low speed expansion */ - label = "LS-SPI0"; - status = "okay"; -}; - -&blsp1_uart2 { - label = "BT-UART"; - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_uart2_default>; - pinctrl-1 = <&blsp1_uart2_sleep>; - - bluetooth { - compatible = "qcom,qca6174-bt"; - - /* bt_disable_n gpio */ - enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; - - clocks = <&divclk4>; - }; -}; - -&adsp_pil { - status = "okay"; -}; - -&blsp2_i2c1 { - /* On High speed expansion */ - label = "HS-I2C2"; - status = "okay"; -}; - -&blsp2_i2c1 { - /* On Low speed expansion */ - label = "LS-I2C1"; - status = "okay"; -}; - -&blsp2_spi6 { - /* On High speed expansion */ - label = "HS-SPI1"; - status = "okay"; -}; - -&blsp2_uart2 { - label = "LS-UART1"; - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart2_2pins_default>; - pinctrl-1 = <&blsp2_uart2_2pins_sleep>; -}; - -&blsp2_uart3 { - label = "LS-UART0"; - status = "disabled"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart3_4pins_default>; - pinctrl-1 = <&blsp2_uart3_4pins_sleep>; -}; - -&camss { - vdda-supply = <&vreg_l2a_1p25>; -}; - -&gpu { - status = "okay"; -}; - -&hdmi { - status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>; - pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>; - - core-vdda-supply = <&vreg_l12a_1p8>; - core-vcc-supply = <&vreg_s4a_1p8>; -}; - -&hdmi_phy { - status = "okay"; - - vddio-supply = <&vreg_l12a_1p8>; - vcca-supply = <&vreg_l28a_0p925>; - #phy-cells = <0>; -}; - -&hsusb_phy1 { - status = "okay"; - - vdda-pll-supply = <&vreg_l12a_1p8>; - vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; -}; - -&hsusb_phy2 { - status = "okay"; - - vdda-pll-supply = <&vreg_l12a_1p8>; - vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; -}; - -&mdp { - status = "okay"; -}; - -&mdss { - status = "okay"; -}; - -&mmcc { - vdd-gfx-supply = <&vdd_gfx>; -}; - -&pm8994_resin { - status = "okay"; - linux,code = <KEY_VOLUMEDOWN>; -}; - -&tlmm { - gpio-line-names = - "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */ - "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */ - "[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */ - "[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */ - "[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */ - "[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */ - "[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */ - "[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */ - "GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */ - "TP93", /* GPIO_9 */ - "GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */ - "[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */ - "NC", /* GPIO_12 */ - "[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */ - "[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */ - "[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */ - "TP99", /* GPIO_16 */ - "[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */ - "[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */ - "[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */ - "[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */ - "FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */ - "FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */ - "GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */ - "GPIO-D", /* GPIO_24, LSEC pin 26 */ - "GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */ - "GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */ - "BLSP6_I2C_SDA", /* GPIO_27 */ - "BLSP6_I2C_SCL", /* GPIO_28 */ - "GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */ - "GPIO30", /* GPIO_30, S HSEC pin 4 */ - "HDMI_CEC", /* GPIO_31 */ - "HDMI_DDC_CLOCK", /* GPIO_32 */ - "HDMI_DDC_DATA", /* GPIO_33 */ - "HDMI_HOT_PLUG_DETECT", /* GPIO_34 */ - "PCIE0_RST_N", /* GPIO_35 */ - "PCIE0_CLKREQ_N", /* GPIO_36 */ - "PCIE0_WAKE", /* GPIO_37 */ - "SD_CARD_DET_N", /* GPIO_38 */ - "TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */ - "W_DISABLE_N", /* GPIO_40 */ - "[BLSP9_UART_TX]", /* GPIO_41 */ - "[BLSP9_UART_RX]", /* GPIO_42 */ - "[BLSP2_UART_CTS_N]", /* GPIO_43 */ - "[BLSP2_UART_RFR_N]", /* GPIO_44 */ - "[BLSP3_UART_TX]", /* GPIO_45 */ - "[BLSP3_UART_RX]", /* GPIO_46 */ - "[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */ - "[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */ - "[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */ - "[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */ - "[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */ - "[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */ - "[CODEC_INT1_N]", /* GPIO_53 */ - "[CODEC_INT2_N]", /* GPIO_54 */ - "[BLSP7_I2C_SDA]", /* GPIO_55 */ - "[BLSP7_I2C_SCL]", /* GPIO_56 */ - "MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */ - "[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */ - "[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */ - "[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */ - "[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */ - "GPIO-E", /* GPIO_62, LSEC pin 27 */ - "TP87", /* GPIO_63 */ - "[CODEC_RST_N]", /* GPIO_64 */ - "[PCM1_CLK]", /* GPIO_65 */ - "[PCM1_SYNC]", /* GPIO_66 */ - "[PCM1_DIN]", /* GPIO_67 */ - "[PCM1_DOUT]", /* GPIO_68 */ - "AUDIO_REF_CLK", /* GPIO_69 */ - "SLIMBUS_CLK", /* GPIO_70 */ - "SLIMBUS_DATA0", /* GPIO_71 */ - "SLIMBUS_DATA1", /* GPIO_72 */ - "NC", /* GPIO_73 */ - "NC", /* GPIO_74 */ - "NC", /* GPIO_75 */ - "NC", /* GPIO_76 */ - "TP94", /* GPIO_77 */ - "NC", /* GPIO_78 */ - "TP95", /* GPIO_79 */ - "GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */ - "TP88", /* GPIO_81 */ - "TP89", /* GPIO_82 */ - "TP90", /* GPIO_83 */ - "TP91", /* GPIO_84 */ - "[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */ - "[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */ - "[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */ - "[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */ - "TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */ - "TSIF1_EN", /* GPIO_90, S HSEC pin 46 */ - "TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */ - "NC", /* GPIO_92 */ - "TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */ - "TSIF2_EN", /* GPIO_94, S HSEC pin 56 */ - "TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */ - "TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */ - "NC", /* GPIO_97 */ - "CAM1_STANDBY_N", /* GPIO_98 */ - "NC", /* GPIO_99 */ - "NC", /* GPIO_100 */ - "[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */ - "BOOT_CONFIG1", /* GPIO_102 */ - "USB_HUB_RESET", /* GPIO_103 */ - "CAM1_RST_N", /* GPIO_104 */ - "NC", /* GPIO_105 */ - "NC", /* GPIO_106 */ - "NC", /* GPIO_107 */ - "NC", /* GPIO_108 */ - "NC", /* GPIO_109 */ - "NC", /* GPIO_110 */ - "NC", /* GPIO_111 */ - "NC", /* GPIO_112 */ - "PMI8994_BUA", /* GPIO_113 */ - "PCIE2_RST_N", /* GPIO_114 */ - "PCIE2_CLKREQ_N", /* GPIO_115 */ - "PCIE2_WAKE", /* GPIO_116 */ - "SSC_IRQ_0", /* GPIO_117 */ - "SSC_IRQ_1", /* GPIO_118 */ - "SSC_IRQ_2", /* GPIO_119 */ - "NC", /* GPIO_120 */ - "GPIO121", /* GPIO_121, S HSEC pin 2 */ - "NC", /* GPIO_122 */ - "SSC_IRQ_6", /* GPIO_123 */ - "SSC_IRQ_7", /* GPIO_124 */ - "GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */ - "BOOT_CONFIG5", /* GPIO_126 */ - "NC", /* GPIO_127 */ - "NC", /* GPIO_128 */ - "BOOT_CONFIG7", /* GPIO_129 */ - "PCIE1_RST_N", /* GPIO_130 */ - "PCIE1_CLKREQ_N", /* GPIO_131 */ - "PCIE1_WAKE", /* GPIO_132 */ - "GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */ - "NC", /* GPIO_134 */ - "NC", /* GPIO_135 */ - "BOOT_CONFIG8", /* GPIO_136 */ - "NC", /* GPIO_137 */ - "NC", /* GPIO_138 */ - "GPS_SSBI2", /* GPIO_139 */ - "GPS_SSBI1", /* GPIO_140 */ - "NC", /* GPIO_141 */ - "NC", /* GPIO_142 */ - "NC", /* GPIO_143 */ - "BOOT_CONFIG6", /* GPIO_144 */ - "NC", /* GPIO_145 */ - "NC", /* GPIO_146 */ - "NC", /* GPIO_147 */ - "NC", /* GPIO_148 */ - "NC"; /* GPIO_149 */ - - sdc2_cd_on: sdc2_cd_on { - mux { - pins = "gpio38"; - function = "gpio"; - }; - - config { - pins = "gpio38"; - bias-pull-up; /* pull up */ - drive-strength = <16>; /* 16 MA */ - }; - }; - - sdc2_cd_off: sdc2_cd_off { - mux { - pins = "gpio38"; - function = "gpio"; - }; - - config { - pins = "gpio38"; - bias-pull-up; /* pull up */ - drive-strength = <2>; /* 2 MA */ - }; - }; - - blsp1_uart2_default: blsp1_uart2_default { - mux { - pins = "gpio41", "gpio42", "gpio43", "gpio44"; - function = "blsp_uart2"; - }; - - config { - pins = "gpio41", "gpio42", "gpio43", "gpio44"; - drive-strength = <16>; - bias-disable; - }; - }; - - blsp1_uart2_sleep: blsp1_uart2_sleep { - mux { - pins = "gpio41", "gpio42", "gpio43", "gpio44"; - function = "gpio"; - }; - - config { - pins = "gpio41", "gpio42", "gpio43", "gpio44"; - drive-strength = <2>; - bias-disable; - }; - }; - - hdmi_hpd_active: hdmi_hpd_active { - mux { - pins = "gpio34"; - function = "hdmi_hot"; - }; - - config { - pins = "gpio34"; - bias-pull-down; - drive-strength = <16>; - }; - }; - - hdmi_hpd_suspend: hdmi_hpd_suspend { - mux { - pins = "gpio34"; - function = "hdmi_hot"; - }; - - config { - pins = "gpio34"; - bias-pull-down; - drive-strength = <2>; - }; - }; - - hdmi_ddc_active: hdmi_ddc_active { - mux { - pins = "gpio32", "gpio33"; - function = "hdmi_ddc"; - }; - - config { - pins = "gpio32", "gpio33"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - hdmi_ddc_suspend: hdmi_ddc_suspend { - mux { - pins = "gpio32", "gpio33"; - function = "hdmi_ddc"; - }; - - config { - pins = "gpio32", "gpio33"; - drive-strength = <2>; - bias-pull-down; - }; - }; -}; - -&pcie0 { - status = "okay"; - perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; - vddpe-3v3-supply = <&wlan_en>; - vdda-supply = <&vreg_l28a_0p925>; -}; - -&pcie1 { - status = "okay"; - perst-gpio = <&tlmm 130 GPIO_ACTIVE_LOW>; - vdda-supply = <&vreg_l28a_0p925>; -}; - -&pcie2 { - status = "okay"; - perst-gpio = <&tlmm 114 GPIO_ACTIVE_LOW>; - vdda-supply = <&vreg_l28a_0p925>; -}; - -&pcie_phy { - status = "okay"; - - vdda-phy-supply = <&vreg_l28a_0p925>; - vdda-pll-supply = <&vreg_l12a_1p8>; -}; - -&pm8994_gpios { - gpio-line-names = - "NC", - "KEY_VOLP_N", - "NC", - "BL1_PWM", - "GPIO-F", /* BL0_PWM, LSEC pin 28 */ - "BL1_EN", - "NC", - "WLAN_EN", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "DIVCLK1", - "DIVCLK2", - "DIVCLK3", - "DIVCLK4", - "BT_EN", - "PMIC_SLB", - "PMIC_BUA", - "USB_VBUS_DET"; - - pinctrl-names = "default"; - pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>; - - ls_exp_gpio_f: pm8994_gpio5 { - pinconf { - pins = "gpio5"; - output-low; - power-source = <2>; // PM8994_GPIO_S4, 1.8V - }; - }; - - bt_en_gpios: bt_en_gpios { - pinconf { - pins = "gpio19"; - function = PMIC_GPIO_FUNC_NORMAL; - output-low; - power-source = <PM8994_GPIO_S4>; // 1.8V - qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; - bias-pull-down; - }; - }; - - wlan_en_gpios: wlan_en_gpios { - pinconf { - pins = "gpio8"; - function = PMIC_GPIO_FUNC_NORMAL; - output-low; - power-source = <PM8994_GPIO_S4>; // 1.8V - qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; - bias-pull-down; - }; - }; - - audio_mclk: clk_div1 { - pinconf { - pins = "gpio15"; - function = "func1"; - power-source = <PM8994_GPIO_S4>; // 1.8V - }; - }; - - volume_up_gpio: pm8996_gpio2 { - pinconf { - pins = "gpio2"; - function = "normal"; - input-enable; - drive-push-pull; - bias-pull-up; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - power-source = <PM8994_GPIO_S4>; // 1.8V - }; - }; - - divclk4_pin_a: divclk4 { - pinconf { - pins = "gpio18"; - function = PMIC_GPIO_FUNC_FUNC2; - - bias-disable; - power-source = <PM8994_GPIO_S4>; - }; - }; - - usb3_vbus_det_gpio: pm8996_gpio22 { - pinconf { - pins = "gpio22"; - function = PMIC_GPIO_FUNC_NORMAL; - input-enable; - bias-pull-down; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - power-source = <PM8994_GPIO_S4>; // 1.8V - }; - }; -}; - -&pm8994_mpps { - gpio-line-names = - "VDDPX_BIAS", - "WIFI_LED", - "NC", - "BT_LED", - "PM_MPP05", - "PM_MPP06", - "PM_MPP07", - "NC"; -}; - -&pm8994_spmi_regulators { - qcom,saw-reg = <&saw3>; - s9 { - qcom,saw-slave; - }; - s10 { - qcom,saw-slave; - }; - s11 { - qcom,saw-leader; - regulator-always-on; - regulator-min-microvolt = <980000>; - regulator-max-microvolt = <980000>; - }; -}; - -&pmi8994_gpios { - gpio-line-names = - "NC", - "SPKR_AMP_EN1", - "SPKR_AMP_EN2", - "TP61", - "NC", - "USB2_VBUS_DET", - "NC", - "NC", - "NC", - "NC"; - - usb2_vbus_det_gpio: pmi8996_gpio6 { - pinconf { - pins = "gpio6"; - function = PMIC_GPIO_FUNC_NORMAL; - input-enable; - bias-pull-down; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - power-source = <PM8994_GPIO_S4>; // 1.8V - }; - }; -}; - -&pmi8994_spmi_regulators { - vdd_gfx: s2@1700 { - reg = <0x1700 0x100>; - regulator-name = "VDD_GFX"; - regulator-min-microvolt = <980000>; - regulator-max-microvolt = <980000>; - }; -}; - -&rpm_requests { - pm8994-regulators { - compatible = "qcom,rpm-pm8994-regulators"; - - vdd_s1-supply = <&vph_pwr>; - vdd_s2-supply = <&vph_pwr>; - vdd_s3-supply = <&vph_pwr>; - vdd_s4-supply = <&vph_pwr>; - vdd_s5-supply = <&vph_pwr>; - vdd_s6-supply = <&vph_pwr>; - vdd_s7-supply = <&vph_pwr>; - vdd_s8-supply = <&vph_pwr>; - vdd_s9-supply = <&vph_pwr>; - vdd_s10-supply = <&vph_pwr>; - vdd_s11-supply = <&vph_pwr>; - vdd_s12-supply = <&vph_pwr>; - vdd_l1-supply = <&vreg_s1b_1p025>; - vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; - vdd_l3_l11-supply = <&vreg_s3a_1p3>; - vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; - vdd_l5_l7-supply = <&vreg_s5a_2p15>; - vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; - vdd_l8_l16_l30-supply = <&vph_pwr>; - vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>; - vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>; - vdd_l14_l15-supply = <&vreg_s5a_2p15>; - vdd_l17_l29-supply = <&vph_pwr_bbyp>; - vdd_l20_l21-supply = <&vph_pwr_bbyp>; - vdd_l25-supply = <&vreg_s3a_1p3>; - vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; - - vreg_s3a_1p3: s3 { - regulator-name = "vreg_s3a_1p3"; - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - /** - * 1.8v required on LS expansion - * for mezzanine boards - */ - vreg_s4a_1p8: s4 { - regulator-name = "vreg_s4a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - vreg_s5a_2p15: s5 { - regulator-name = "vreg_s5a_2p15"; - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - }; - vreg_s7a_1p0: s7 { - regulator-name = "vreg_s7a_1p0"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - }; - - vreg_l1a_1p0: l1 { - regulator-name = "vreg_l1a_1p0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - vreg_l2a_1p25: l2 { - regulator-name = "vreg_l2a_1p25"; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - }; - vreg_l3a_0p875: l3 { - regulator-name = "vreg_l3a_0p875"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <850000>; - }; - vreg_l4a_1p225: l4 { - regulator-name = "vreg_l4a_1p225"; - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - vreg_l6a_1p2: l6 { - regulator-name = "vreg_l6a_1p2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - vreg_l8a_1p8: l8 { - regulator-name = "vreg_l8a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l9a_1p8: l9 { - regulator-name = "vreg_l9a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l10a_1p8: l10 { - regulator-name = "vreg_l10a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l11a_1p15: l11 { - regulator-name = "vreg_l11a_1p15"; - regulator-min-microvolt = <1150000>; - regulator-max-microvolt = <1150000>; - }; - vreg_l12a_1p8: l12 { - regulator-name = "vreg_l12a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l13a_2p95: l13 { - regulator-name = "vreg_l13a_2p95"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - vreg_l14a_1p8: l14 { - regulator-name = "vreg_l14a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l15a_1p8: l15 { - regulator-name = "vreg_l15a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l16a_2p7: l16 { - regulator-name = "vreg_l16a_2p7"; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - vreg_l17a_2p8: l17 { - regulator-name = "vreg_l17a_2p8"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - }; - vreg_l18a_2p85: l18 { - regulator-name = "vreg_l18a_2p85"; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2900000>; - }; - vreg_l19a_2p8: l19 { - regulator-name = "vreg_l19a_2p8"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - vreg_l20a_2p95: l20 { - regulator-name = "vreg_l20a_2p95"; - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - }; - vreg_l21a_2p95: l21 { - regulator-name = "vreg_l21a_2p95"; - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - vreg_l22a_3p0: l22 { - regulator-name = "vreg_l22a_3p0"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - vreg_l23a_2p8: l23 { - regulator-name = "vreg_l23a_2p8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - vreg_l24a_3p075: l24 { - regulator-name = "vreg_l24a_3p075"; - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - vreg_l25a_1p2: l25 { - regulator-name = "vreg_l25a_1p2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-allow-set-load; - }; - vreg_l26a_0p8: l27 { - regulator-name = "vreg_l26a_0p8"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - vreg_l28a_0p925: l28 { - regulator-name = "vreg_l28a_0p925"; - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <925000>; - regulator-allow-set-load; - }; - vreg_l29a_2p8: l29 { - regulator-name = "vreg_l29a_2p8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - vreg_l30a_1p8: l30 { - regulator-name = "vreg_l30a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l32a_1p8: l32 { - regulator-name = "vreg_l32a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vreg_lvs1a_1p8: lvs1 { - regulator-name = "vreg_lvs1a_1p8"; - }; - - vreg_lvs2a_1p8: lvs2 { - regulator-name = "vreg_lvs2a_1p8"; - }; - }; - - pmi8994-regulators { - compatible = "qcom,rpm-pmi8994-regulators"; - - vdd_s1-supply = <&vph_pwr>; - vdd_s2-supply = <&vph_pwr>; - vdd_s3-supply = <&vph_pwr>; - vdd_bst_byp-supply = <&vph_pwr>; - - vph_pwr_bbyp: boost-bypass { - regulator-name = "vph_pwr_bbyp"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vreg_s1b_1p025: s1 { - regulator-name = "vreg_s1b_1p025"; - regulator-min-microvolt = <1025000>; - regulator-max-microvolt = <1025000>; - }; - }; -}; - -&sdhc2 { - /* External SD card */ - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_state_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_state_off &sdc2_cd_off>; - cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vreg_l21a_2p95>; - vqmmc-supply = <&vreg_l13a_2p95>; - status = "okay"; -}; - -&q6asmdai { - dai@0 { - reg = <0>; - }; - - dai@1 { - reg = <1>; - }; - - dai@2 { - reg = <2>; - }; -}; - -&sound { - compatible = "qcom,apq8096-sndcard"; - model = "DB820c"; - audio-routing = "RX_BIAS", "MCLK", - "MM_DL1", "MultiMedia1 Playback", - "MM_DL2", "MultiMedia2 Playback", - "MultiMedia3 Capture", "MM_UL3"; - - mm1-dai-link { - link-name = "MultiMedia1"; - cpu { - sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; - }; - }; - - mm2-dai-link { - link-name = "MultiMedia2"; - cpu { - sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; - }; - }; - - mm3-dai-link { - link-name = "MultiMedia3"; - cpu { - sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; - }; - }; - - hdmi-dai-link { - link-name = "HDMI"; - cpu { - sound-dai = <&q6afedai HDMI_RX>; - }; - - platform { - sound-dai = <&q6routing>; - }; - - codec { - sound-dai = <&hdmi 0>; - }; - }; - - slim-dai-link { - link-name = "SLIM Playback"; - cpu { - sound-dai = <&q6afedai SLIMBUS_6_RX>; - }; - - platform { - sound-dai = <&q6routing>; - }; - - codec { - sound-dai = <&wcd9335 6>; - }; - }; - - slimcap-dai-link { - link-name = "SLIM Capture"; - cpu { - sound-dai = <&q6afedai SLIMBUS_0_TX>; - }; - - platform { - sound-dai = <&q6routing>; - }; - - codec { - sound-dai = <&wcd9335 1>; - }; - }; -}; - -&ufsphy { - status = "okay"; - - vdda-phy-supply = <&vreg_l28a_0p925>; - vdda-pll-supply = <&vreg_l12a_1p8>; - vddp-ref-clk-supply = <&vreg_l25a_1p2>; -}; - -&ufshc { - status = "okay"; - - vcc-supply = <&vreg_l20a_2p95>; - vccq-supply = <&vreg_l25a_1p2>; - vccq2-supply = <&vreg_s4a_1p8>; - - vcc-max-microamp = <600000>; - vccq-max-microamp = <450000>; - vccq2-max-microamp = <450000>; -}; - -&usb2 { - status = "okay"; - extcon = <&usb2_id>; - - dwc3@7600000 { - extcon = <&usb2_id>; - dr_mode = "otg"; - maximum-speed = "high-speed"; - }; -}; - -&usb3 { - status = "okay"; - extcon = <&usb3_id>; - - dwc3@6a00000 { - extcon = <&usb3_id>; - dr_mode = "otg"; - }; -}; - -&usb3phy { - status = "okay"; - - vdda-phy-supply = <&vreg_l28a_0p925>; - vdda-pll-supply = <&vreg_l12a_1p8>; - -}; - -&venus { - status = "okay"; -}; - -&wcd9335 { - clock-names = "mclk", "slimbus"; - clocks = <&div1_mclk>, - <&rpmcc RPM_SMD_BB_CLK1>; - - vdd-buck-supply = <&vreg_s4a_1p8>; - vdd-buck-sido-supply = <&vreg_s4a_1p8>; - vdd-tx-supply = <&vreg_s4a_1p8>; - vdd-rx-supply = <&vreg_s4a_1p8>; - vdd-io-supply = <&vreg_s4a_1p8>; -}; diff --git a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts index a57c60070cdc..567b33106556 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts @@ -395,9 +395,6 @@ vdda-phy-supply = <&vreg_l28a_0p925>; vdda-pll-supply = <&vreg_l12a_1p8>; - - vdda-phy-max-microamp = <18380>; - vdda-pll-max-microamp = <9440>; }; &venus { diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index d2fe58e0eb7a..933b56103a46 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -200,8 +200,7 @@ clock-names = "bam_clk"; #dma-cells = <1>; qcom,ee = <1>; - qcom,controlled-remotely = <1>; - qcom,config-pipe-trust-reg = <0>; + qcom,controlled-remotely; }; crypto: crypto@73a000 { @@ -347,9 +346,8 @@ compatible = "qcom,bam-v1.7.0"; reg = <0x0 0x07984000 0x0 0x1a000>; interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_QPIC_CLK>, - <&gcc GCC_QPIC_AHB_CLK>; - clock-names = "iface_clk", "bam_clk"; + clocks = <&gcc GCC_QPIC_AHB_CLK>; + clock-names = "bam_clk"; #dma-cells = <1>; qcom,ee = <0>; status = "disabled"; @@ -401,7 +399,7 @@ reset-names = "phy", "common"; - pcie_phy0: lane@84200 { + pcie_phy0: phy@84200 { reg = <0x0 0x84200 0x0 0x16c>, /* Serdes Tx */ <0x0 0x84400 0x0 0x200>, /* Serdes Rx */ <0x0 0x84800 0x0 0x4f4>; /* PCS: Lane0, COM, PCIE */ @@ -671,6 +669,89 @@ }; }; + ssphy_0: ssphy@78000 { + compatible = "qcom,ipq6018-qmp-usb3-phy"; + reg = <0x0 0x78000 0x0 0x1C4>; + #address-cells = <2>; + #size-cells = <2>; + #clock-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB0_AUX_CLK>, + <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, <&xo>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_USB0_PHY_BCR>, + <&gcc GCC_USB3PHY_0_PHY_BCR>; + reset-names = "phy","common"; + status = "disabled"; + + usb0_ssphy: lane@78200 { + reg = <0x0 0x00078200 0x0 0x130>, /* Tx */ + <0x0 0x00078400 0x0 0x200>, /* Rx */ + <0x0 0x00078800 0x0 0x1F8>, /* PCS */ + <0x0 0x00078600 0x0 0x044>; /* PCS misc */ + #phy-cells = <0>; + clocks = <&gcc GCC_USB0_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "gcc_usb0_pipe_clk_src"; + }; + }; + + qusb_phy_0: qusb@79000 { + compatible = "qcom,ipq6018-qusb2-phy"; + reg = <0x0 0x079000 0x0 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, + <&xo>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2_0_PHY_BCR>; + status = "disabled"; + }; + + usb3: usb3@8A00000 { + compatible = "qcom,ipq6018-dwc3", "qcom,dwc3"; + reg = <0x0 0x8AF8800 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, + <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_USB0_SLEEP_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; + clock-names = "sys_noc_axi", + "master", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, + <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; + assigned-clock-rates = <133330000>, + <133330000>, + <20000000>; + + resets = <&gcc GCC_USB0_BCR>; + status = "disabled"; + + dwc_0: usb@8A00000 { + compatible = "snps,dwc3"; + reg = <0x0 0x8A00000 0x0 0xcd00>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + phys = <&qusb_phy_0>, <&usb0_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + tx-fifo-resize; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + snps,ref-clock-period-ns = <0x32>; + dr_mode = "host"; + }; + }; }; wcss: wcss-smp2p { diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts index cc08dc4eb56a..b5e1eaa367bf 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts @@ -24,6 +24,8 @@ device_type = "memory"; reg = <0x0 0x40000000 0x0 0x20000000>; }; + + vreg_dummy: regulator-dummy { }; }; &blsp1_i2c2 { @@ -97,10 +99,14 @@ &ssphy_0 { status = "okay"; + vdda-phy-supply = <&vreg_dummy>; + vdda-pll-supply = <&vreg_dummy>; }; &ssphy_1 { status = "okay"; + vdda-phy-supply = <&vreg_dummy>; + vdda-pll-supply = <&vreg_dummy>; }; &usb_0 { diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index db333001df4d..6c6a0f853669 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -91,7 +91,6 @@ ssphy_1: phy@58000 { compatible = "qcom,ipq8074-qmp-usb3-phy"; reg = <0x00058000 0x1c4>; - #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -106,12 +105,13 @@ reset-names = "phy","common"; status = "disabled"; - usb1_ssphy: lane@58200 { + usb1_ssphy: phy@58200 { reg = <0x00058200 0x130>, /* Tx */ <0x00058400 0x200>, /* Rx */ <0x00058800 0x1f8>, /* PCS */ <0x00058600 0x044>; /* PCS misc*/ #phy-cells = <0>; + #clock-cells = <1>; clocks = <&gcc GCC_USB1_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "gcc_usb1_pipe_clk_src"; @@ -134,7 +134,6 @@ ssphy_0: phy@78000 { compatible = "qcom,ipq8074-qmp-usb3-phy"; reg = <0x00078000 0x1c4>; - #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -149,12 +148,13 @@ reset-names = "phy","common"; status = "disabled"; - usb0_ssphy: lane@78200 { + usb0_ssphy: phy@78200 { reg = <0x00078200 0x130>, /* Tx */ <0x00078400 0x200>, /* Rx */ <0x00078800 0x1f8>, /* PCS */ <0x00078600 0x044>; /* PCS misc*/ #phy-cells = <0>; + #clock-cells = <1>; clocks = <&gcc GCC_USB0_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "gcc_usb0_pipe_clk_src"; @@ -174,34 +174,60 @@ status = "disabled"; }; - pcie_phy0: phy@86000 { + pcie_qmp0: phy@86000 { compatible = "qcom,ipq8074-qmp-pcie-phy"; reg = <0x00086000 0x1000>; - #phy-cells = <0>; - clocks = <&gcc GCC_PCIE0_PIPE_CLK>; - clock-names = "pipe_clk"; - clock-output-names = "pcie20_phy0_pipe_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&gcc GCC_PCIE0_AUX_CLK>, + <&gcc GCC_PCIE0_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; resets = <&gcc GCC_PCIE0_PHY_BCR>, <&gcc GCC_PCIE0PHY_PHY_BCR>; reset-names = "phy", "common"; status = "disabled"; + + pcie_phy0: phy@86200 { + reg = <0x86200 0x16c>, + <0x86400 0x200>, + <0x86800 0x4f4>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_PCIE0_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "pcie_0_pipe_clk"; + }; }; - pcie_phy1: phy@8e000 { + pcie_qmp1: phy@8e000 { compatible = "qcom,ipq8074-qmp-pcie-phy"; reg = <0x0008e000 0x1000>; - #phy-cells = <0>; - clocks = <&gcc GCC_PCIE1_PIPE_CLK>; - clock-names = "pipe_clk"; - clock-output-names = "pcie20_phy1_pipe_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&gcc GCC_PCIE1_AUX_CLK>, + <&gcc GCC_PCIE1_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; resets = <&gcc GCC_PCIE1_PHY_BCR>, <&gcc GCC_PCIE1PHY_PHY_BCR>; reset-names = "phy", "common"; status = "disabled"; + + pcie_phy1: phy@8e200 { + reg = <0x8e200 0x16c>, + <0x8e400 0x200>, + <0x8e800 0x4f4>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_PCIE1_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "pcie_1_pipe_clk"; + }; }; prng: rng@e3000 { @@ -212,7 +238,7 @@ status = "disabled"; }; - cryptobam: dma@704000 { + cryptobam: dma-controller@704000 { compatible = "qcom,bam-v1.7.0"; reg = <0x00704000 0x20000>; interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; @@ -220,7 +246,7 @@ clock-names = "bam_clk"; #dma-cells = <1>; qcom,ee = <1>; - qcom,controlled-remotely = <1>; + qcom,controlled-remotely; status = "disabled"; }; @@ -293,6 +319,25 @@ #reset-cells = <0x1>; }; + spmi_bus: spmi@200f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0200f000 0x001000>, + <0x02400000 0x800000>, + <0x02c00000 0x800000>, + <0x03800000 0x200000>, + <0x0200a000 0x000700>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "periph_irq"; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; + }; + sdhc_1: sdhci@7824900 { compatible = "qcom,sdhci-msm-v4"; reg = <0x7824900 0x500>, <0x7824000 0x800>; @@ -411,6 +456,21 @@ status = "disabled"; }; + blsp1_i2c5: i2c@78b9000 { + compatible = "qcom,i2c-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x78b9000 0x600>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; + dmas = <&blsp_dma 21>, <&blsp_dma 20>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + blsp1_i2c6: i2c@78ba000 { compatible = "qcom,i2c-qup-v2.2.1"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts index 670bd1bebd73..265e539e7e99 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts @@ -9,6 +9,7 @@ / { model = "Alcatel OneTouch Idol 3 (4.7)"; compatible = "alcatel,idol347", "qcom,msm8916"; + chassis-type = "handset"; aliases { serial0 = &blsp1_uart2; diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts index cee451e59385..d4d33dd3584a 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts @@ -4,10 +4,13 @@ #include "msm8916-pm8916.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Asus Zenfone 2 Laser"; compatible = "asus,z00l", "qcom,msm8916"; + chassis-type = "handset"; aliases { serial0 = &blsp1_uart2; @@ -40,6 +43,21 @@ }; }; + reg_sd_vmmc: regulator-sdcard-vmmc { + compatible = "regulator-fixed"; + regulator-name = "sdcard-vmmc"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + gpio = <&msmgpio 87 GPIO_ACTIVE_HIGH>; + enable-active-high; + + startup-delay-us = <200>; + + pinctrl-names = "default"; + pinctrl-0 = <&sd_vmmc_en_default>; + }; + usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; id-gpios = <&msmgpio 110 GPIO_ACTIVE_HIGH>; @@ -48,6 +66,64 @@ }; }; +&blsp_i2c2 { + status = "okay"; + + magnetometer@c { + compatible = "asahi-kasei,ak09911"; + reg = <0x0c>; + + vdd-supply = <&pm8916_l8>; + vid-supply = <&pm8916_l6>; + + reset-gpios = <&msmgpio 112 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&mag_reset_default>; + }; + + imu@68 { + compatible = "invensense,mpu6515"; + reg = <0x68>; + + interrupt-parent = <&msmgpio>; + interrupts = <36 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&imu_default>; + + mount-matrix = "1", "0", "0", + "0", "-1", "0", + "0", "0", "1"; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5306"; + reg = <0x38>; + + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; + + vcc-supply = <&pm8916_l11>; + iovcc-supply = <&pm8916_l6>; + + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_default>; + }; +}; + &blsp1_uart2 { status = "okay"; }; @@ -64,6 +140,16 @@ pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; +&sdhc_2 { + status = "okay"; + vmmc-supply = <®_sd_vmmc>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; +}; + &usb { status = "okay"; extcon = <&usb_id>, <&usb_id>; @@ -185,6 +271,46 @@ bias-pull-up; }; + imu_default: imu-default { + pins = "gpio36"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + mag_reset_default: mag-reset-default { + pins = "gpio112"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + sd_vmmc_en_default: sd-vmmc-en-default { + pins = "gpio87"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + touchscreen_default: touchscreen-default { + pins = "gpio13"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + + reset { + pins = "gpio12"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + }; + usb_id_default: usb-id-default { pins = "gpio110"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts index e0075b574190..42d93d3fba36 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts @@ -25,6 +25,7 @@ / { model = "Huawei Ascend G7"; compatible = "huawei,g7", "qcom,msm8916"; + chassis-type = "handset"; aliases { serial0 = &blsp1_uart2; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts index 1e893c0b6fbc..852de624f5af 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -11,6 +11,7 @@ / { model = "Longcheer L8150"; compatible = "longcheer,l8150", "qcom,msm8916-v1-qrd/9-v1", "qcom,msm8916"; + chassis-type = "handset"; aliases { serial0 = &blsp1_uart2; @@ -30,14 +31,6 @@ }; }; - // FIXME: Use extcon device provided by charger driver when available - usb_vbus: usb-vbus { - compatible = "linux,extcon-usb-gpio"; - vbus-gpio = <&msmgpio 62 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb_vbus_default>; - }; - gpio-keys { compatible = "gpio-keys"; @@ -121,9 +114,21 @@ status = "okay"; accelerometer@10 { - compatible = "bosch,bmc150_accel"; + compatible = "bosch,bmc156_accel"; reg = <0x10>; + /* + * For some reason the interrupt line is usually not connected + * to the BMC156. However, there are two pads next to the chip + * that can be shorted to make it work if needed. + * + * interrupt-parent = <&msmgpio>; + * interrupts = <116 IRQ_TYPE_EDGE_RISING>; + */ + + pinctrl-names = "default"; + pinctrl-0 = <&accel_int_default>; + vdd-supply = <&pm8916_l17>; vddio-supply = <&pm8916_l6>; @@ -133,9 +138,15 @@ }; magnetometer@12 { - compatible = "bosch,bmc150_magn"; + compatible = "bosch,bmc156_magn"; reg = <0x12>; + interrupt-parent = <&msmgpio>; + interrupts = <113 IRQ_TYPE_EDGE_RISING>; + + pinctrl-names = "default"; + pinctrl-0 = <&magn_int_default>; + vdd-supply = <&pm8916_l17>; vddio-supply = <&pm8916_l6>; }; @@ -145,7 +156,8 @@ reg = <0x68>; interrupt-parent = <&msmgpio>; - interrupts = <23 IRQ_TYPE_EDGE_RISING>; + interrupts = <23 IRQ_TYPE_EDGE_RISING>, + <22 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&gyro_int_default>; @@ -196,6 +208,10 @@ linux,code = <KEY_VOLUMEDOWN>; }; +&pm8916_usbin { + status = "okay"; +}; + &pm8916_vib { status = "okay"; }; @@ -225,11 +241,11 @@ &usb { status = "okay"; dr_mode = "peripheral"; - extcon = <&usb_vbus>; + extcon = <&pm8916_usbin>; }; &usb_hs_phy { - extcon = <&usb_vbus>; + extcon = <&pm8916_usbin>; }; &smd_rpm_regulators { @@ -336,6 +352,14 @@ }; &msmgpio { + accel_int_default: accel-int-default { + pins = "gpio116"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + camera_flash_default: camera-flash-default { pins = "gpio31", "gpio32"; function = "gpio"; @@ -361,25 +385,26 @@ }; gyro_int_default: gyro-int-default { - pins = "gpio23"; + pins = "gpio22", "gpio23"; function = "gpio"; drive-strength = <2>; bias-disable; }; - tp_int_default: tp-int-default { - pins = "gpio13"; + magn_int_default: magn-int-default { + pins = "gpio113"; function = "gpio"; drive-strength = <2>; bias-disable; }; - usb_vbus_default: usb-vbus-default { - pins = "gpio62"; + tp_int_default: tp-int-default { + pins = "gpio13"; function = "gpio"; - bias-pull-up; + drive-strength = <2>; + bias-disable; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts index 27845189ac2b..f9ce123471d4 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts @@ -10,6 +10,7 @@ / { model = "BQ Aquaris X5 (Longcheer L8910)"; compatible = "longcheer,l8910", "qcom,msm8916"; + chassis-type = "handset"; aliases { serial0 = &blsp1_uart2; diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts index d66c15538785..7c0ceb3cff45 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts @@ -5,9 +5,22 @@ /dts-v1/; -#include "msm8916-mtp.dtsi" +#include "msm8916-pm8916.dtsi" / { model = "Qualcomm Technologies, Inc. MSM 8916 MTP"; compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp/1", "qcom,msm8916"; + + aliases { + serial0 = &blsp1_uart2; + usid0 = &pm8916_0; + }; + + chosen { + stdout-path = "serial0"; + }; +}; + +&blsp1_uart2 { + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi deleted file mode 100644 index 1bd05046cdeb..000000000000 --- a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi +++ /dev/null @@ -1,21 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. - */ - -#include "msm8916-pm8916.dtsi" - -/ { - aliases { - serial0 = &blsp1_uart2; - usid0 = &pm8916_0; - }; - - chosen { - stdout-path = "serial0"; - }; -}; - -&blsp1_uart2 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts index 6cc2eaeb1d33..4ba11b020f9b 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts @@ -7,6 +7,7 @@ / { model = "Samsung Galaxy A3U (EUR)"; compatible = "samsung,a3u-eur", "qcom,msm8916"; + chassis-type = "handset"; reg_panel_vdd3: regulator-panel-vdd3 { compatible = "regulator-fixed"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts index c2eff5aebf85..d978c9ac179d 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts @@ -7,6 +7,7 @@ / { model = "Samsung Galaxy A5U (EUR)"; compatible = "samsung,a5u-eur", "qcom,msm8916"; + chassis-type = "handset"; reg_touch_key: regulator-touch-key { compatible = "regulator-fixed"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts new file mode 100644 index 000000000000..a78f87a5bf4f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts @@ -0,0 +1,534 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2019 Stephan Gerhold + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/* + * NOTE: The original firmware from Samsung can only boot ARM32 kernels. + * Unfortunately, the firmware is signed and cannot be replaced easily. + * There seems to be no way to boot ARM64 kernels on this device at the moment, + * even though the hardware would support it. + * + * However, it is possible to use this device tree by compiling an ARM32 kernel + * instead. For clarity and build testing this device tree is maintained next + * to the other MSM8916 device trees. However, it is actually used through + * arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts + */ + +/ { + model = "Samsung Galaxy S4 Mini Value Edition"; + compatible = "samsung,serranove", "qcom,msm8916"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + /* Additional memory used by Samsung firmware modifications */ + tz-apps@85500000 { + reg = <0x0 0x85500000 0x0 0xb00000>; + no-map; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + home { + label = "Home"; + gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOMEPAGE>; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_hall_sensor_default>; + + label = "GPIO Hall Effect Sensor"; + + hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + }; + }; + + reg_vdd_tsp: regulator-vdd-tsp { + compatible = "regulator-fixed"; + regulator-name = "vdd_tsp"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tsp_en_default>; + }; + + reg_touch_key: regulator-touch-key { + compatible = "regulator-fixed"; + regulator-name = "touch_key"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + gpio = <&msmgpio 86 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_en_default>; + }; + + reg_key_led: regulator-key-led { + compatible = "regulator-fixed"; + regulator-name = "key_led"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 60 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_led_en_default>; + }; + + i2c-muic { + compatible = "i2c-gpio"; + sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-names = "default"; + pinctrl-0 = <&muic_i2c_default>; + + #address-cells = <1>; + #size-cells = <0>; + + muic: extcon@14 { + compatible = "siliconmitus,sm5504-muic"; + reg = <0x14>; + + interrupt-parent = <&msmgpio>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&muic_irq_default>; + }; + }; + + i2c-tkey { + compatible = "i2c-gpio"; + sda-gpios = <&msmgpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&msmgpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_i2c_default>; + + #address-cells = <1>; + #size-cells = <0>; + + touchkey@20 { + compatible = "coreriver,tc360-touchkey"; + reg = <0x20>; + + interrupt-parent = <&msmgpio>; + interrupts = <98 IRQ_TYPE_EDGE_FALLING>; + + vcc-supply = <®_touch_key>; + vdd-supply = <®_key_led>; + vddio-supply = <&pm8916_l6>; + + linux,keycodes = <KEY_APPSELECT KEY_BACK>; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_default>; + }; + }; + + i2c-nfc { + compatible = "i2c-gpio"; + sda-gpios = <&msmgpio 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&msmgpio 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-names = "default"; + pinctrl-0 = <&nfc_i2c_default>; + + #address-cells = <1>; + #size-cells = <0>; + + nfc@2b { + compatible = "nxp,pn547", "nxp,nxp-nci-i2c"; + reg = <0x2b>; + + interrupt-parent = <&msmgpio>; + interrupts = <21 IRQ_TYPE_EDGE_RISING>; + + enable-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&msmgpio 49 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&nfc_default>; + }; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + imu@6b { + compatible = "st,lsm6ds3"; + reg = <0x6b>; + + interrupt-parent = <&msmgpio>; + interrupts = <115 IRQ_TYPE_EDGE_RISING>; + + pinctrl-names = "default"; + pinctrl-0 = <&imu_irq_default>; + }; +}; + +&blsp_i2c4 { + status = "okay"; + + battery@35 { + compatible = "richtek,rt5033-battery"; + reg = <0x35>; + + interrupt-parent = <&msmgpio>; + interrupts = <121 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&fg_alert_default>; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@20 { + compatible = "zinitix,bt541"; + reg = <0x20>; + + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + touchscreen-size-x = <540>; + touchscreen-size-y = <960>; + + vdd-supply = <®_vdd_tsp>; + vddo-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&tsp_irq_default>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&pm8916_resin { + status = "okay"; + linux,code = <KEY_VOLUMEDOWN>; +}; + +&pm8916_vib { + status = "okay"; +}; + +&pronto { + status = "okay"; + + iris { + compatible = "qcom,wcn3660b"; + }; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + + non-removable; + + /* + * FIXME: Disable UHS-I modes since tuning fails with: + * + * sdhci_msm 7864900.sdhci: mmc1: No tuning point found + * mmc1: tuning execution failed: -5 + * mmc1: error -5 whilst initialising SD card + * + * This is the quirk used on downstream, which suggests this is + * a hardware limitation. However, probing a card using DDR50 works + * (without tuning), so maybe only tuning is broken? + */ + no-1-8-v; +}; + +&usb { + status = "okay"; + extcon = <&muic>, <&muic>; +}; + +&usb_hs_phy { + extcon = <&muic>; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + fg_alert_default: fg-alert-default { + pins = "gpio121"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default { + pins = "gpio107", "gpio109"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + gpio_hall_sensor_default: gpio-hall-sensor-default { + pins = "gpio52"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + imu_irq_default: imu-irq-default { + pins = "gpio115"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + muic_i2c_default: muic-i2c-default { + pins = "gpio105", "gpio106"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + muic_irq_default: muic-irq-default { + pins = "gpio12"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + nfc_default: nfc-default { + pins = "gpio20", "gpio49"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + + irq { + pins = "gpio21"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + }; + + nfc_i2c_default: nfc-i2c-default { + pins = "gpio0", "gpio1"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tkey_default: tkey-default { + pins = "gpio98"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tkey_en_default: tkey-en-default { + pins = "gpio86"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tkey_i2c_default: tkey-i2c-default { + pins = "gpio16", "gpio17"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tkey_led_en_default: tkey-led-en-default { + pins = "gpio60"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tsp_en_default: tsp-en-default { + pins = "gpio73"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tsp_irq_default: tsp-irq-default { + pins = "gpio13"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts index 4e20cc0008f7..69a44c6f57fc 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts @@ -11,6 +11,7 @@ / { model = "Xiaomi Redmi 2 (Wingtech WT88047)"; compatible = "wingtech,wt88047", "qcom,msm8916"; + chassis-type = "handset"; aliases { serial0 = &blsp1_uart2; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 3f85e34a8ce6..c1c42f26b61e 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -41,9 +41,13 @@ no-map; }; - smem_mem: smem_region@86300000 { + smem@86300000 { + compatible = "qcom,smem"; reg = <0x0 0x86300000 0x0 0x100000>; no-map; + + hwlocks = <&tcsr_mutex 3>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; }; hypervisor@86400000 { @@ -124,6 +128,8 @@ #cooling-cells = <2>; power-domains = <&CPU_PD0>; power-domain-names = "psci"; + qcom,acc = <&cpu0_acc>; + qcom,saw = <&cpu0_saw>; }; CPU1: cpu@1 { @@ -137,6 +143,8 @@ #cooling-cells = <2>; power-domains = <&CPU_PD1>; power-domain-names = "psci"; + qcom,acc = <&cpu1_acc>; + qcom,saw = <&cpu1_saw>; }; CPU2: cpu@2 { @@ -150,6 +158,8 @@ #cooling-cells = <2>; power-domains = <&CPU_PD2>; power-domain-names = "psci"; + qcom,acc = <&cpu2_acc>; + qcom,saw = <&cpu2_saw>; }; CPU3: cpu@3 { @@ -163,6 +173,8 @@ #cooling-cells = <2>; power-domains = <&CPU_PD3>; power-domain-names = "psci"; + qcom,acc = <&cpu3_acc>; + qcom,saw = <&cpu3_saw>; }; L2_0: l2-cache { @@ -323,15 +335,6 @@ }; }; - smem { - compatible = "qcom,smem"; - - memory-region = <&smem_mem>; - qcom,rpm-msg-ram = <&rpm_msg_ram>; - - hwlocks = <&tcsr_mutex 3>; - }; - smp2p-hexagon { compatible = "qcom,smp2p"; qcom,smem = <435>, <428>; @@ -414,7 +417,7 @@ }; }; - soc: soc { + soc: soc@0 { #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0 0xffffffff>; @@ -445,7 +448,7 @@ }; }; - rpm_msg_ram: memory@60000 { + rpm_msg_ram: sram@60000 { compatible = "qcom,rpm-msg-ram"; reg = <0x00060000 0x8000>; }; @@ -1384,11 +1387,17 @@ lpass: audio-controller@7708000 { status = "disabled"; compatible = "qcom,lpass-cpu-apq8016"; + + /* + * Note: Unlike the name would suggest, the SEC_I2S_CLK + * is actually only used by Tertiary MI2S while + * Primary/Secondary MI2S both use the PRI_I2S_CLK. + */ clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>, <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>, <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, - <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>, <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>; @@ -1420,7 +1429,7 @@ }; sdhc_1: sdhci@7824000 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07824900 0x11c>, <0x07824000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -1438,7 +1447,7 @@ }; sdhc_2: sdhci@7864000 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07864900 0x11c>, <0x07864000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -1765,7 +1774,7 @@ label = "pronto"; - wcnss { + wcnss_ctrl: wcnss { compatible = "qcom,wcnss"; qcom,smd-channels = "WCNSS_CTRL"; @@ -1871,6 +1880,54 @@ status = "disabled"; }; }; + + cpu0_acc: power-manager@b088000 { + compatible = "qcom,msm8916-acc"; + reg = <0x0b088000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu0_saw: power-manager@b089000 { + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b089000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu1_acc: power-manager@b098000 { + compatible = "qcom,msm8916-acc"; + reg = <0x0b098000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu1_saw: power-manager@b099000 { + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b099000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu2_acc: power-manager@b0a8000 { + compatible = "qcom,msm8916-acc"; + reg = <0x0b0a8000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu2_saw: power-manager@b0a9000 { + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b0a9000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu3_acc: power-manager@b0b8000 { + compatible = "qcom,msm8916-acc"; + reg = <0x0b0b8000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu3_saw: power-manager@b0b9000 { + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b0b9000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; }; thermal-zones { diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts index 1ccca83292ac..4da6c44bf532 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts @@ -16,6 +16,8 @@ / { model = "LG Nexus 5X"; compatible = "lg,bullhead", "qcom,msm8992"; + chassis-type = "handset"; + /* required for bootloader to select correct board */ qcom,msm-id = <251 0>, <252 0>; qcom,board-id = <0xb64 0>; diff --git a/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts index 5322b9ce5839..8933b53694e8 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts @@ -12,4 +12,5 @@ / { model = "Microsoft Lumia 950"; compatible = "microsoft,talkman", "qcom,msm8992"; + chassis-type = "handset"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts index 357d55496e75..69fcb6b0398d 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts @@ -14,6 +14,8 @@ / { model = "Xiaomi Mi 4C"; compatible = "xiaomi,libra", "qcom,msm8992"; + chassis-type = "handset"; + /* required for bootloader to select correct board */ qcom,msm-id = <251 0 252 0>; qcom,pmic-id = <65545 65546 0 0>; diff --git a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts index c096b7758aa0..0e3dd48f0dbf 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts @@ -14,6 +14,7 @@ / { model = "Huawei Nexus 6P"; compatible = "huawei,angler", "qcom,msm8994"; + chassis-type = "handset"; /* required for bootloader to select correct board */ qcom,msm-id = <207 0x20000>; qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>; diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts index d0aaf5750c21..c593418202b8 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts @@ -12,4 +12,5 @@ / { model = "Microsoft Lumia 950 XL"; compatible = "microsoft,cityman", "qcom,msm8994"; + chassis-type = "handset"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts index b5e90c85aaf6..99388b019a11 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts @@ -10,6 +10,7 @@ / { model = "Sony Xperia Z3+/Z4"; compatible = "sony,ivy-row", "qcom,msm8994"; + chassis-type = "handset"; }; &pm8994_l3 { diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts index a1d1a075941a..71758d2cfd5e 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts @@ -10,6 +10,7 @@ / { model = "Sony Xperia Z4 Tablet (LTE)"; compatible = "sony,karin-row", "qcom,msm8994"; + chassis-type = "tablet"; }; &blsp2_i2c5 { diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts index 1385956a69f3..69b7df0ed605 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts @@ -10,6 +10,7 @@ / { model = "Sony Xperia Z5 Premium"; compatible = "sony,satsuki-row", "qcom,msm8994"; + chassis-type = "handset"; }; &pm8994_l14 { diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts index d3ba9867a369..466508cd8234 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts @@ -10,6 +10,7 @@ / { model = "Sony Xperia Z5"; compatible = "sony,sumire-row", "qcom,msm8994"; + chassis-type = "handset"; }; /delete-node/ &pm8994_l19; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts index f129479bbf95..76bf50191f9a 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts @@ -10,6 +10,7 @@ / { model = "Sony Xperia Z5 Compact"; compatible = "sony,suzuran-row", "qcom,msm8994"; + chassis-type = "handset"; }; &pm8994_l14 { diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index 986fe60dec5f..5a9a5ed0565f 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -715,7 +715,7 @@ reg = <0xfc400000 0x2000>; }; - rpm_msg_ram: memory@fc428000 { + rpm_msg_ram: sram@fc428000 { compatible = "qcom,rpm-msg-ram"; reg = <0xfc428000 0x4000>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-mtp.dts b/arch/arm64/boot/dts/qcom/msm8996-mtp.dts index 45ed594c1b9c..7d9fc35bc7a0 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-mtp.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-mtp.dts @@ -5,9 +5,31 @@ /dts-v1/; -#include "msm8996-mtp.dtsi" +#include "msm8996.dtsi" / { model = "Qualcomm Technologies, Inc. MSM 8996 MTP"; compatible = "qcom,msm8996-mtp"; + + aliases { + serial0 = &blsp2_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + soc { + serial@75b0000 { + status = "okay"; + }; + }; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_phy { + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi deleted file mode 100644 index ac43a91f1104..000000000000 --- a/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi +++ /dev/null @@ -1,30 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. - */ - -#include "msm8996.dtsi" - -/ { - aliases { - serial0 = &blsp2_uart2; - }; - - chosen { - stdout-path = "serial0"; - }; - - soc { - serial@75b0000 { - status = "okay"; - }; - }; -}; - -&hdmi { - status = "okay"; -}; - -&hdmi_phy { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts index b4cca54dcb68..4a0645db0ae1 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts @@ -12,6 +12,7 @@ / { model = "Sony Xperia X Performance"; compatible = "sony,dora-row", "qcom,msm8996"; + chassis-type = "handset"; }; /delete-node/ &tof_sensor; diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts index be6ea855fcce..d3100ddf926f 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts @@ -12,4 +12,5 @@ / { model = "Sony Xperia XZ"; compatible = "sony,kagura-row", "qcom,msm8996"; + chassis-type = "handset"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts index 1eee7d0fc178..3e5bdaba8378 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts @@ -12,6 +12,7 @@ / { model = "Sony Xperia XZs"; compatible = "sony,keyaki-row", "qcom,msm8996"; + chassis-type = "handset"; }; &pm8994_l19 { diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi index 507396c4d23b..ff7f39d29dd5 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi @@ -620,6 +620,7 @@ &pmi8994_wled { status = "okay"; default-brightness = <512>; + qcom,num-strings = <3>; }; &rpm_requests { diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi new file mode 100644 index 000000000000..01e573f0dfbf --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi @@ -0,0 +1,673 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Yassine Oudjana <y.oudjana@protonmail.com> + */ + +/dts-v1/; + +#include "msm8996.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + clocks { + compatible = "simple-bus"; + + divclk1_cdc: divclk1 { + compatible = "gpio-gate-clock"; + clocks = <&rpmcc RPM_SMD_DIV_CLK1>; + #clock-cells = <0>; + enable-gpios = <&pm8994_gpios 15 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&divclk1_default>; + }; + + divclk4: divclk4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "divclk4"; + + pinctrl-names = "default"; + pinctrl-0 = <&divclk4_pin_a>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + vol_up { + label = "Volume Up"; + gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; + debounce-interval = <15>; + }; + + dome { + label = "Home"; + gpios = <&tlmm 34 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + wakeup-source; + debounce-interval = <15>; + }; + }; + + reserved-memory { + memory@88800000 { + reg = <0x0 0x88800000 0x0 0x1400000>; + no-map; + }; + + /* This platform has all PIL regions offset by 0x1400000 */ + /delete-node/ mpss@88800000; + mpss_region: mpss@89c00000 { + reg = <0x0 0x89c00000 0x0 0x6200000>; + no-map; + }; + + /delete-node/ adsp@8ea00000; + adsp_region: adsp@8ea00000 { + reg = <0x0 0x8fe00000 0x0 0x1b00000>; + no-map; + }; + + /delete-node/ slpi@90b00000; + slpi_region: slpi@91900000 { + reg = <0x0 0x91900000 0x0 0xa00000>; + no-map; + }; + + /delete-node/ gpu@8f200000; + zap_shader_region: gpu@92300000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x92300000 0x0 0x2000>; + no-map; + }; + + /delete-node/ venus@91000000; + venus_region: venus@90400000 { + reg = <0x0 0x92400000 0x0 0x500000>; + no-map; + }; + + ramoops@92900000 { + compatible = "ramoops"; + reg = <0x0 0x92900000 0x0 0x100000>; + no-map; + + record-size = <0x8000>; + console-size = <0x80000>; + ftrace-size = <0x20000>; + pmsg-size = <0x40000>; + }; + + /delete-node/ rmtfs@86700000; + rmtfs@f6c00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xf6c00000 0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + /delete-node/ mba@91500000; + mba_region: mba@f6f00000 { + reg = <0x0 0xf6f00000 0x0 0x100000>; + no-map; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_3v2_tp: vdd-3v2-tp { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v2_tp"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + startup-delay-us = <4000>; + vin-supply = <&vph_pwr>; + + gpio = <&tlmm 73 0>; + enable-active-high; + }; + + vdd_3v3: rome-vreg { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <4000>; + vin-supply = <&vph_pwr_bbyp>; + + gpio = <&pm8994_gpios 9 0>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&rome_enable_default>; + + /* Required by QCA6174a - vddpe-3v3 */ + regulator-always-on; + }; + + /* WL_EN pin defined as a fixed regulator */ + wlan_en: wlan-en-1-8v { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8994_gpios 8 0>; + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en_default>; + }; +}; + +&adsp_pil { + status = "okay"; +}; + +&blsp2_i2c2 { + status = "okay"; + label = "NFC_I2C"; + clock-frequency = <400000>; + + nfc: pn548@28 { + compatible = "nxp,nxp-nci-i2c"; + + reg = <0x28>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&nfc_default>; + }; +}; + +&blsp2_i2c3 { + status = "okay"; + label = "TYPEC_I2C"; + + typec: tusb320@47 { + compatible = "ti,tusb320"; + reg = <0x47>; + interrupt-parent = <&tlmm>; + interrupts = <63 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&blsp2_i2c6 { + status = "okay"; + label = "MSM_TS_I2C"; +}; + +&blsp1_uart2 { + status = "okay"; + label = "QCA_UART"; + + bluetooth: qca6174a { + compatible = "qcom,qca6174-bt"; + + enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; + clocks = <&divclk4>; + }; +}; + +&dsi0 { + status = "okay"; + + vdd-supply = <&vreg_l2a_1p25>; + vddio-supply = <&vreg_l14a_1p8>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdss_dsi_default &mdss_te_default>; + pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>; +}; + +&dsi0_out { + status = "okay"; + + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + status = "okay"; + + vcca-supply = <&vreg_l28a_0p925>; +}; + +&gpu { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mmcc { + vdd-gfx-supply = <&vdd_gfx>; +}; + +&pcie0 { + status = "okay"; + + /* Supplied by vdd_3v3, but choose wlan_en to drive enable pin high */ + vddpe-3v3-supply = <&wlan_en>; + vdda-supply = <&vreg_l28a_0p925>; + + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; +}; + +&pcie_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; +}; + +&pm8994_resin { + status = "okay"; + + linux,code = <KEY_VOLUMEDOWN>; +}; + +&usb3 { + status = "okay"; + extcon = <&typec>; + + qcom,select-utmi-as-pipe-clk; + + dwc3@6a00000 { + extcon = <&typec>; + + /* usb3-phy is not used on this device */ + phys = <&hsusb_phy1>; + phy-names = "usb2-phy"; + + maximum-speed = "high-speed"; + snps,is-utmi-l1-suspend; + snps,usb2-gadget-lpm-disable; + snps,hird-threshold = /bits/ 8 <0>; + }; +}; + +&hsusb_phy1 { + status = "okay"; + extcon = <&typec>; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&ufshc { + status = "okay"; + + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l25a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + + vcc-max-microamp = <600000>; + vccq-max-microamp = <450000>; + vccq2-max-microamp = <450000>; +}; + +&ufsphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + + vdda-phy-max-microamp = <18380>; + vdda-pll-max-microamp = <9440>; + + vddp-ref-clk-supply = <&vreg_l25a_1p2>; + vddp-ref-clk-max-microamp = <100>; + vddp-ref-clk-always-on; +}; + +&venus { + status = "okay"; +}; + +&wcd9335 { + clock-names = "mclk", "slimbus"; + clocks = <&divclk1_cdc>, + <&rpmcc RPM_SMD_BB_CLK1>; + + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-vbat-supply = <&vph_pwr>; + vdd-micbias-supply = <&vph_pwr_bbyp>; + vdd-io-supply = <&vreg_s4a_1p8>; +}; + +&rpm_requests { + pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_l1-supply = <&vreg_s1b_1p025>; + vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; + vdd_l3_l11-supply = <&vreg_s3a_1p3>; + vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; + vdd_l5_l7-supply = <&vreg_s5a_2p15>; + vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; + vdd_l8_l16_l30-supply = <&vph_pwr>; + vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>; + vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>; + vdd_l14_l15-supply = <&vreg_s5a_2p15>; + vdd_l17_l29-supply = <&vph_pwr_bbyp>; + vdd_l20_l21-supply = <&vph_pwr_bbyp>; + vdd_l25-supply = <&vreg_s3a_1p3>; + vdd_lvs1_2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p3: s3 { + regulator-name = "vreg_s3a_1p3"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + + /* Required by QCA6174a - vdd-core */ + regulator-always-on; + }; + vreg_s4a_1p8: s4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + + /* Required by QCA6174a - vddio */ + regulator-always-on; + }; + vreg_s5a_2p15: s5 { + regulator-name = "vreg_s5a_2p15"; + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + vreg_s7a_0p8: s7 { + regulator-name = "vreg_s7a_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + vreg_l1a_1p0: l1 { + regulator-name = "vreg_l1a_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l2a_1p25: l2 { + regulator-name = "vreg_l2a_1p25"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + vreg_l4a_1p225: l4 { + regulator-name = "vreg_l4a_1p225"; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + vreg_l6a_1p8: l6 { + regulator-name = "vreg_l6a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l8a_1p8: l8 { + regulator-name = "vreg_l8a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l9a_1p8: l9 { + regulator-name = "vreg_l9a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l10a_1p8: l10 { + regulator-name = "vreg_l10a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l12a_1p8: l12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + vreg_l13a_2p95: l13 { + regulator-name = "vreg_l13a_2p95"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + vreg_l14a_1p8: l14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l15a_1p8: l15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l16a_2p7: l16 { + regulator-name = "vreg_l16a_2p7"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + vreg_l19a_3p3: l19 { + regulator-name = "vreg_l19a_3p3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + vreg_l20a_2p95: l20 { + regulator-name = "vreg_l20a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + vreg_l21a_2p95: l21 { + regulator-name = "vreg_l21a_2p95"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + vreg_l23a_2p8: l23 { + regulator-name = "vreg_l23a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l24a_3p075: l24 { + regulator-name = "vreg_l24a_3p075"; + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + vreg_l25a_1p2: l25 { + regulator-name = "vreg_l25a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + vreg_l27a_1p2: l27 { + regulator-name = "vreg_l27a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l28a_0p925: l28 { + regulator-name = "vreg_l28a_0p925"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + vreg_l30a_1p8: l30 { + regulator-name = "vreg_l30a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + /* Required by QCA6174a - vddio-xtal */ + regulator-always-on; + }; + vreg_l32a_1p8: l32 { + regulator-name = "vreg_l32a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + pmi8994-regulators { + compatible = "qcom,rpm-pmi8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + vreg_s1b_1p025: s1 { + regulator-name = "vreg_s1b_1p025"; + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; + }; + + vph_pwr_bbyp: boost-bypass { + regulator-name = "vph_pwr_bbyp"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3600000>; + }; + }; +}; + +&pm8994_spmi_regulators { + qcom,saw-reg = <&saw3>; + s8 { + qcom,saw-slave; + }; + s9 { + qcom,saw-slave; + }; + s10 { + qcom,saw-slave; + }; + vreg_apc_0p8: s11 { + qcom,saw-leader; + regulator-name = "vreg_apc_0p8"; + regulator-min-microvolt = <470000>; + regulator-max-microvolt = <1140000>; + regulator-max-step-microvolt = <150000>; + regulator-always-on; + }; +}; + +&pmi8994_spmi_regulators { + vdd_gfx: s2 { + regulator-name = "vdd_gfx"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1015000>; + regulator-enable-ramp-delay = <500>; + }; +}; + +&pm8994_gpios { + wlan_en_default: wlan-en-default { + pins = "gpio8"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <PM8994_GPIO_S4>; + bias-disable; + }; + + rome_enable_default: rome-enable-default { + pins = "gpio9"; + function = PMIC_GPIO_FUNC_NORMAL; + output-high; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <PM8994_GPIO_VPH>; + }; + + divclk1_default: divclk1_default { + pins = "gpio15"; + function = PMIC_GPIO_FUNC_FUNC1; + bias-disable; + power-source = <PM8994_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; + + divclk4_pin_a: divclk4 { + pins = "gpio18"; + function = PMIC_GPIO_FUNC_FUNC2; + bias-disable; + power-source = <PM8994_GPIO_S4>; + }; +}; + +&tlmm { + mdss_dsi_default: mdss_dsi_default { + pins = "gpio8"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + mdss_dsi_sleep: mdss_dsi_sleep { + pins = "gpio8"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + mdss_te_default: mdss_te_default { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + mdss_te_sleep: mdss_te_sleep { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + nfc_default: nfc_default { + pins = "gpio12", "gpio21"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts new file mode 100644 index 000000000000..34f82e06ef53 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts @@ -0,0 +1,465 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Raffaele Tranquillini <raffaele.tranquillini@gmail.com> + */ + +/dts-v1/; + +#include "msm8996-xiaomi-common.dtsi" +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> +#include <dt-bindings/input/ti-drv260x.h> + +/ { + model = "Xiaomi Mi 5"; + compatible = "xiaomi,gemini", "qcom,msm8996"; + chassis-type = "handset"; + qcom,msm-id = <246 0x30001>; + qcom,pmic-id = <0x20009 0x2000a 0x00 0x00>; + qcom,board-id = <31 0>; + + clocks { + divclk2_haptics: divclk2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "divclk2"; + + pinctrl-names = "default"; + pinctrl-0 = <&divclk2_pin_a>; + }; + }; +}; + +&adsp_pil { + firmware-name = "qcom/msm8996/gemini/adsp.mbn"; +}; + +&blsp2_i2c3 { + haptics: drv2604@5a { + compatible = "ti,drv2604"; + reg = <0x5a>; + enable-gpio = <&tlmm 93 0x00>; + mode = <DRV260X_LRA_MODE>; + library-sel = <DRV260X_LIB_LRA>; + pinctrl-names = "default","sleep"; + pinctrl-0 = <&vibrator_default>; + pinctrl-1 = <&vibrator_sleep>; + }; + + lp5562@30 { + compatible = "ti,lp5562"; + reg = <0x30>; + #address-cells = <1>; + #size-cells = <0>; + enable-gpio = <&pm8994_gpios 7 1>; + clock-mode = /bits/8 <2>; + label = "button-backlight"; + + led@0 { + reg = <0>; + chan-name = "button-backlight"; + led-cur = /bits/ 8 <0x32>; + max-cur = /bits/ 8 <0xC8>; + }; + + led@1 { + reg = <0>; + chan-name = "button-backlight1"; + led-cur = /bits/ 8 <0x32>; + max-cur = /bits/ 8 <0xC8>; + }; + }; +}; + +&blsp2_i2c6 { + synaptics@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&tlmm>; + interrupts = <125 IRQ_TYPE_LEVEL_LOW>; + vdda-supply = <&vreg_l6a_1p8>; + vdd-supply = <&vdd_3v2_tp>; + reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&touchscreen_default>; + pinctrl-1 = <&touchscreen_sleep>; + }; + +}; + +&dsi0 { + status = "okay"; + + vdd-supply = <&vreg_l2a_1p25>; + vdda-supply = <&vreg_l19a_3p3>; + vddio-supply = <&vreg_l14a_1p8>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdss_dsi_default &mdss_te_default>; + pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>; + + panel: panel@0 { + compatible = "jdi,fhd-r63452"; + reg = <0>; + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + backlight = <&pmi8994_wled>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + remote-endpoint = <&panel_in>; +}; + +&gpu { + zap-shader { + firmware-name = "qcom/msm8996/gemini/a530_zap.mbn"; + }; +}; + +&pmi8994_wled { + status = "okay"; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + +&sound { + compatible = "qcom,apq8096-sndcard"; + model = "gemini"; + audio-routing = "RX_BIAS", "MCLK", + "MM_DL1", "MultiMedia1 Playback", + "MM_DL2", "MultiMedia2 Playback", + "MultiMedia3 Capture", "MM_UL3"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_6_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 6>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 1>; + }; + }; +}; + +&venus { + firmware-name = "qcom/msm8996/gemini/venus.mbn"; +}; + +&rpm_requests { + pm8994-regulators { + vreg_l17a_2p8: l17 { + regulator-name = "vreg_l17a_2p8"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + vreg_l29a_2p7: l29 { + regulator-name = "vreg_l29a_2p7"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; +}; + +&pm8994_gpios { + gpio-line-names = + "NC", /* GPIO_1 */ + "VOL_UP_N", /* GPIO_2 */ + "SPKR_ID", /* GPIO_3 */ + "PWM_HAPTICS", /* GPIO_4 */ + "INFARED_DRV", /* GPIO_5 */ + "NC", /* GPIO_6 */ + "KEYPAD_LED_EN", /* GPIO_7 */ + "WL_EN", /* GPIO_8 */ + "3P3_ENABLE", /* GPIO_9 */ + "FP_ID", /* GPIO_10 */ + "NC", /* GPIO_11 */ + "NC", /* GPIO_12 */ + "NC", /* GPIO_13 */ + "NC", /* GPIO_14 */ + "DIVCLK1_CDC", /* GPIO_15 */ + "DIVCLK2_HAPTICS", /* GPIO_16 */ + "NC", /* GPIO_17 */ + "32KHz_CLK_IN", /* GPIO_18 */ + "BT_EN", /* GPIO_19 */ + "PMIC_SLB", /* GPIO_20 */ + "UIM_BATT_ALARM", /* GPIO_21 */ + "NC"; /* GPIO_22 */ + + divclk2_pin_a: divclk2 { + pins = "gpio16"; + function = PMIC_GPIO_FUNC_FUNC2; + bias-disable; + power-source = <PM8994_GPIO_S4>; + }; +}; + +&pm8994_mpps { + gpio-line-names = + "NC", /* MPP_1 */ + "CCI_TIMER1", /* MPP_2 */ + "PMIC_SLB", /* MPP_3 */ + "EXT_FET_WLED_PWR_EN_N",/* MPP_4 */ + "NC", /* MPP_5 */ + "NC", /* MPP_6 */ + "NC", /* MPP_7 */ + "NC"; /* MPP_8 */ +}; + +&pmi8994_gpios { + gpio-line-names = + "NC", /* GPIO_1 */ + "SPKR_PA_RST", /* GPIO_2 */ + "NC", /* GPIO_3 */ + "NC", /* GPIO_4 */ + "NC", /* GPIO_5 */ + "NC", /* GPIO_6 */ + "NC", /* GPIO_7 */ + "NC", /* GPIO_8 */ + "NC", /* GPIO_9 */ + "NC"; /* GPIO_10 */ +}; + +&tlmm { + gpio-line-names = + "ESE_SPI_MOSI", /* GPIO_0 */ + "ESE_SPI_MISO", /* GPIO_1 */ + "ERR_INT_N", /* GPIO_2 */ + "ESE_SPI_CLK", /* GPIO_3 */ + "MSM_UART_TX", /* GPIO_4 */ + "MSM_UART_RX", /* GPIO_5 */ + "NFC_I2C_SDA", /* GPIO_6 */ + "NFC_I2C_SCL", /* GPIO_7 */ + "LCD0_RESET_N", /* GPIO_8 */ + "NFC_IRQ", /* GPIO_9 */ + "LCD_TE", /* GPIO_10 */ + "LCD_ID_DET1", /* GPIO_11 */ + "NFC_DISABLE", /* GPIO_12 */ + "CAM_MCLK0", /* GPIO_13 */ + "NC", /* GPIO_14 */ + "CAM_MCLK2", /* GPIO_15 */ + "ESE_PWR_REQ", /* GPIO_16 */ + "CCI_I2C_SDA0", /* GPIO_17 */ + "CCI_I2C_SCL0", /* GPIO_18 */ + "CCI_I2C_SDA1", /* GPIO_19 */ + "CCI_I2C_SCL1", /* GPIO_20 */ + "NFC_DWL_REQ", /* GPIO_21 */ + "CCI_TIMER1", /* GPIO_22 */ + "WEBCAM1_RESET_N", /* GPIO_23 */ + "ESE_IRQ", /* GPIO_24 */ + "NC", /* GPIO_25 */ + "WEBCAM1_STANDBY", /* GPIO_26 */ + "NC", /* GPIO_27 */ + "NC", /* GPIO_28 */ + "NC", /* GPIO_29 */ + "CAM1_RST_N", /* GPIO_30 */ + "NC", /* GPIO_31 */ + "NC", /* GPIO_32 */ + "NC", /* GPIO_33 */ + "FP_DOME_SW", /* GPIO_34 */ + "PCI_E0_RST_N", /* GPIO_35 */ + "PCI_E0_CLKREQ_N", /* GPIO_36 */ + "PCI_E0_WAKE", /* GPIO_37 */ + "FM_INT_N", /* GPIO_38 */ + "FM_RESET_N", /* GPIO_39 */ + "NC", /* GPIO_40 */ + "QCA_UART_TXD", /* GPIO_41 */ + "QCA_UART_RXD", /* GPIO_42 */ + "QCA_UART_CTS", /* GPIO_43 */ + "QCA_UART_RTS", /* GPIO_44 */ + "MAWC_UART_TX", /* GPIO_45 */ + "MAWC_UART_RX", /* GPIO_46 */ + "NC", /* GPIO_47 */ + "NC", /* GPIO_48 */ + "AUDIO_SWITCH_EN", /* GPIO_49 */ + "FP_SPI_RST", /* GPIO_50 */ + "TYPEC_I2C_SDA", /* GPIO_51 */ + "TYPEC_I2C_SCL", /* GPIO_52 */ + "CODEC_INT2_N", /* GPIO_53 */ + "CODEC_INT1_N", /* GPIO_54 */ + "APPS_I2C7_SDA", /* GPIO_55 */ + "APPS_I2C7_SCL", /* GPIO_56 */ + "FORCE_USB_BOOT", /* GPIO_57 */ + "SPKR_I2S_BCK", /* GPIO_58 */ + "SPKR_I2S_WS", /* GPIO_59 */ + "SPKR_I2S_DOUT", /* GPIO_60 */ + "SPKR_I2S_DIN", /* GPIO_61 */ + "ESE_RSTN", /* GPIO_62 */ + "TYPEC_INT", /* GPIO_63 */ + "CODEC_RESET_N", /* GPIO_64 */ + "PCM_CLK", /* GPIO_65 */ + "PCM_SYNC", /* GPIO_66 */ + "PCM_DIN", /* GPIO_67 */ + "PCM_DOUT", /* GPIO_68 */ + "HIFI_CLK", /* GPIO_69 */ + "SLIMBUS_CLK", /* GPIO_70 */ + "SLIMBUS_DATA0", /* GPIO_71 */ + "SLIMBUS_DATA1", /* GPIO_72 */ + "LDO_5V_IN_EN", /* GPIO_73 */ + "NC", /* GPIO_74 */ + "FM_I2S_CLK", /* GPIO_75 */ + "FM_I2S_SYNC", /* GPIO_76 */ + "FM_I2S_DATA", /* GPIO_77 */ + "FM_STATUS", /* GPIO_78 */ + "NC", /* GPIO_79 */ + "SENSOR_RESET_N", /* GPIO_80 */ + "FP_SPI_MOSI", /* GPIO_81 */ + "FP_SPI_MISO", /* GPIO_82 */ + "FP_SPI_CS_N", /* GPIO_83 */ + "FP_SPI_CLK", /* GPIO_84 */ + "NC", /* GPIO_85 */ + "CAM_VDD_1P05_EN", /* GPIO_86 */ + "MSM_TS_I2C_SDA", /* GPIO_87 */ + "MSM_TS_I2C_SCL", /* GPIO_88 */ + "TS_RESOUT_N", /* GPIO_89 */ + "ESE_SPI_CS_N", /* GPIO_90 */ + "NC", /* GPIO_91 */ + "NC", /* GPIO_92 */ + "HAPTICS_EN", /* GPIO_93 */ + "NC", /* GPIO_94 */ + "NC", /* GPIO_95 */ + "NC", /* GPIO_96 */ + "NC", /* GPIO_97 */ + "GRFC_1", /* GPIO_98 */ + "NC", /* GPIO_99 */ + "GRFC_3", /* GPIO_100 */ + "GRFC_4", /* GPIO_101 */ + "NC", /* GPIO_102 */ + "NC", /* GPIO_103 */ + "GRFC_7", /* GPIO_104 */ + "UIM2_DATA", /* GPIO_105 */ + "UIM2_CLK", /* GPIO_106 */ + "UIM2_RESET", /* GPIO_107 */ + "UIM2_PRESENT", /* GPIO_108 */ + "UIM1_DATA", /* GPIO_109 */ + "UIM1_CLK", /* GPIO_110 */ + "UIM1_RESET", /* GPIO_111 */ + "UIM1_PRESENT", /* GPIO_112 */ + "UIM_BATT_ALARM", /* GPIO_113 */ + "GRFC_8", /* GPIO_114 */ + "GRFC_9", /* GPIO_115 */ + "TX_GTR_THRES", /* GPIO_116 */ + "ACCEL_INT", /* GPIO_117 */ + "GYRO_INT", /* GPIO_118 */ + "COMPASS_INT", /* GPIO_119 */ + "PROXIMITY_INT_N", /* GPIO_120 */ + "FP_IRQ", /* GPIO_121 */ + "NC", /* GPIO_122 */ + "HALL_INTR2", /* GPIO_123 */ + "HALL_INTR1", /* GPIO_124 */ + "TS_INT_N", /* GPIO_125 */ + "NC", /* GPIO_126 */ + "GRFC_11", /* GPIO_127 */ + "NC", /* GPIO_128 */ + "EXT_GPS_LNA_EN", /* GPIO_129 */ + "NC", /* GPIO_130 */ + "NC", /* GPIO_131 */ + "NC", /* GPIO_132 */ + "GRFC_14", /* GPIO_133 */ + "GSM_TX2_PHASE_D", /* GPIO_134 */ + "NC", /* GPIO_135 */ + "NC", /* GPIO_136 */ + "RFFE3_DATA", /* GPIO_137 */ + "RFFE3_CLK", /* GPIO_138 */ + "NC", /* GPIO_139 */ + "NC", /* GPIO_140 */ + "RFFE5_DATA", /* GPIO_141 */ + "RFFE5_CLK", /* GPIO_142 */ + "NC", /* GPIO_143 */ + "COEX_UART_TX", /* GPIO_144 */ + "COEX_UART_RX", /* GPIO_145 */ + "RFFE2_DATA", /* GPIO_146 */ + "RFFE2_CLK", /* GPIO_147 */ + "RFFE1_DATA", /* GPIO_148 */ + "RFFE1_CLK"; /* GPIO_149 */ + + touchscreen_default: touchscreen_default { + pins = "gpio89", "gpio125"; + function = "gpio"; + drive-strength = <10>; + bias-pull-up; + }; + + touchscreen_sleep: touchscreen_sleep { + pins = "gpio89", "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + vibrator_default: vibrator_default { + pins = "gpio93"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + vibrator_sleep: vibrator_sleep { + pins = "gpio93"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts new file mode 100644 index 000000000000..e5b8402b1ed6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts @@ -0,0 +1,432 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Yassine Oudjana <y.oudjana@protonmail.com> + */ + +/dts-v1/; + +#include "msm8996-xiaomi-common.dtsi" +#include "pmi8996.dtsi" +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> + +/ { + model = "Xiaomi Mi Note 2"; + compatible = "xiaomi,scorpio", "qcom,msm8996"; + chassis-type = "handset"; + qcom,msm-id = <305 0x10000>; + qcom,board-id = <34 0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer0: framebuffer@83401000 { + compatible = "simple-framebuffer"; + reg = <0x00 0x83401000 0x00 (1080 * 1920 * 3)>; + width = <1080>; + height = <1920>; + stride = <(1080 * 3)>; + format = "r8g8b8"; + + /* DSI0 and MDP SMMU clocks */ + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MMSS_MMAGIC_AHB_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MMSS_MISC_AHB_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>, + <&mmcc SMMU_MDP_AHB_CLK>, + <&mmcc SMMU_MDP_AXI_CLK>; + + /* MDSS power domain */ + power-domains = <&mmcc MDSS_GDSC>; + }; + }; + + reserved-memory { + cont_splash_mem: memory@83401000 { + reg = <0x0 0x83401000 0x0 (1080 * 1920 * 3)>; + no-map; + }; + }; +}; + +&adsp_pil { + firmware-name = "qcom/msm8996/scorpio/adsp.mbn"; +}; + +&blsp2_i2c6 { + touchscreen: atmel-mxt-ts@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + interrupt-parent = <&tlmm>; + interrupts = <125 IRQ_TYPE_LEVEL_LOW>; + vdda-supply = <&vreg_l6a_1p8>; + vdd-supply = <&vdd_3v2_tp>; + reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&touchscreen_default>; + pinctrl-1 = <&touchscreen_sleep>; + }; +}; + +&gpu { + zap-shader { + firmware-name = "qcom/msm8996/scorpio/a530_zap.mbn"; + }; +}; + +&mdp_smmu { + /* + * Probing this SMMU causes a crash due to writing to some secure + * registers. Disable it for now. + */ + status = "disabled"; +}; + +&mdss { + /* + * MDSS depends on the MDP SMMU, and probing it alters the bootloader + * configured framebuffer used by simplefb. Disable it for now. + */ + status = "disabled"; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + +&sound { + compatible = "qcom,apq8096-sndcard"; + model = "scorpio"; + audio-routing = "RX_BIAS", "MCLK"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_6_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 6>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 1>; + }; + }; +}; + +&venus { + firmware-name = "qcom/msm8996/scorpio/venus.mbn"; +}; + +&rpm_requests { + pm8994-regulators { + vreg_l3a_0p875: l3 { + regulator-name = "vreg_l3a_0p875"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + }; + vreg_l11a_1p1: l11 { + regulator-name = "vreg_l11a_1p1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + vreg_l17a_2p8: l17 { + regulator-name = "vreg_l17a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l18a_2p8: l18 { + regulator-name = "vreg_l18a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l22a_3p0: l22 { + regulator-name = "vreg_l22a_3p0"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <3500000>; + }; + vreg_l29a_2p7: l29 { + regulator-name = "vreg_l29a_2p7"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + }; +}; + +&vdd_gfx { + regulator-max-microvolt = <1065000>; +}; + +&pm8994_gpios { + gpio-line-names = + "NC", /* GPIO_1 */ + "VOL_UP_N", /* GPIO_2 */ + "SPKR_ID", /* GPIO_3 */ + "PWM_HAPTICS", /* GPIO_4 */ + "INFARED_DRV", /* GPIO_5 */ + "NC", /* GPIO_6 */ + "KEYPAD_LED_EN_A", /* GPIO_7 */ + "WL_EN", /* GPIO_8 */ + "3P3_ENABLE", /* GPIO_9 */ + "KEYPAD_LED_EN_B", /* GPIO_10 */ + "FP_ID", /* GPIO_11 */ + "NC", /* GPIO_12 */ + "NC", /* GPIO_13 */ + "NC", /* GPIO_14 */ + "DIVCLK1_CDC", /* GPIO_15 */ + "DIVCLK2_HAPTICS", /* GPIO_16 */ + "NC", /* GPIO_17 */ + "32KHz_CLK_IN", /* GPIO_18 */ + "BT_EN", /* GPIO_19 */ + "PMIC_SLB", /* GPIO_20 */ + "UIM_BATT_ALARM", /* GPIO_21 */ + "NC"; /* GPIO_22 */ +}; + +&pm8994_mpps { + gpio-line-names = + "VREF_SDC_UIM_APC", /* MPP_1 */ + "NC", /* MPP_2 */ + "VREF_DACX", /* MPP_3 */ + "NC", /* MPP_4 */ + "NC", /* MPP_5 */ + "STAT_SMB1351", /* MPP_6 */ + "NC", /* MPP_7 */ + "NC"; /* MPP_8 */ +}; + +&pmi8994_gpios { + gpio-line-names = + "NC", /* GPIO_1 */ + "SPKR_PA_RST", /* GPIO_2 */ + "NC", /* GPIO_3 */ + "NC", /* GPIO_4 */ + "NC", /* GPIO_5 */ + "NC", /* GPIO_6 */ + "NC", /* GPIO_7 */ + "NC", /* GPIO_8 */ + "NC", /* GPIO_9 */ + "NC"; /* GPIO_10 */ +}; + +&tlmm { + gpio-line-names = + "ESE_SPI_MOSI", /* GPIO_0 */ + "ESE_SPI_MISO", /* GPIO_1 */ + "NC", /* GPIO_2 */ + "ESE_SPI_CLK", /* GPIO_3 */ + "MSM_UART_TX", /* GPIO_4 */ + "MSM_UART_RX", /* GPIO_5 */ + "NFC_I2C_SDA", /* GPIO_6 */ + "NFC_I2C_SCL", /* GPIO_7 */ + "OLED_RESET_N", /* GPIO_8 */ + "NFC_IRQ", /* GPIO_9 */ + "OLED_TE", /* GPIO_10 */ + "OLED_ID_DET1", /* GPIO_11 */ + "NFC_DISABLE", /* GPIO_12 */ + "CAM_MCLK0", /* GPIO_13 */ + "OLED_ID_DET2", /* GPIO_14 */ + "CAM_MCLK2", /* GPIO_15 */ + "ESE_PWR_REQ", /* GPIO_16 */ + "CCI_I2C_SDA0", /* GPIO_17 */ + "CCI_I2C_SCL0", /* GPIO_18 */ + "CCI_I2C_SDA1", /* GPIO_19 */ + "CCI_I2C_SCL1", /* GPIO_20 */ + "NFC_DWL_REQ", /* GPIO_21 */ + "CCI_TIMER1", /* GPIO_22 */ + "WEBCAM1_RESET_N", /* GPIO_23 */ + "ESE_IRQ", /* GPIO_24 */ + "NC", /* GPIO_25 */ + "WEBCAM1_STANDBY", /* GPIO_26 */ + "NC", /* GPIO_27 */ + "NC", /* GPIO_28 */ + "OLED_ERR_FG", /* GPIO_29 */ + "CAM1_RST_N", /* GPIO_30 */ + "HIFI_SW_MUTE", /* GPIO_31 */ + "NC", /* GPIO_32 */ + "NC", /* GPIO_33 */ + "FP_DOME_SW", /* GPIO_34 */ + "PCI_E0_RST_N", /* GPIO_35 */ + "PCI_E0_CLKREQ_N", /* GPIO_36 */ + "PCI_E0_WAKE", /* GPIO_37 */ + "OV_PWDN", /* GPIO_38 */ + "NC", /* GPIO_39 */ + "VDDR_1P6_EN", /* GPIO_40 */ + "QCA_UART_TXD", /* GPIO_41 */ + "QCA_UART_RXD", /* GPIO_42 */ + "QCA_UART_CTS", /* GPIO_43 */ + "QCA_UART_RTS", /* GPIO_44 */ + "MAWC_UART_TX", /* GPIO_45 */ + "MAWC_UART_RX", /* GPIO_46 */ + "NC", /* GPIO_47 */ + "NC", /* GPIO_48 */ + "AUDIO_SWITCH_EN", /* GPIO_49 */ + "FP_SPI_RST", /* GPIO_50 */ + "TYPEC_I2C_SDA", /* GPIO_51 */ + "TYPEC_I2C_SCL", /* GPIO_52 */ + "CODEC_INT2_N", /* GPIO_53 */ + "CODEC_INT1_N", /* GPIO_54 */ + "APPS_I2C7_SDA", /* GPIO_55 */ + "APPS_I2C7_SCL", /* GPIO_56 */ + "FORCE_USB_BOOT", /* GPIO_57 */ + "SPKR_I2S_BCK", /* GPIO_58 */ + "SPKR_I2S_WS", /* GPIO_59 */ + "SPKR_I2S_DOUT", /* GPIO_60 */ + "SPKR_I2S_DIN", /* GPIO_61 */ + "ESE_RSTN", /* GPIO_62 */ + "TYPEC_INT", /* GPIO_63 */ + "CODEC_RESET_N", /* GPIO_64 */ + "PCM_CLK", /* GPIO_65 */ + "PCM_SYNC", /* GPIO_66 */ + "PCM_DIN", /* GPIO_67 */ + "PCM_DOUT", /* GPIO_68 */ + "CDC_44K1_CLK", /* GPIO_69 */ + "SLIMBUS_CLK", /* GPIO_70 */ + "SLIMBUS_DATA0", /* GPIO_71 */ + "SLIMBUS_DATA1", /* GPIO_72 */ + "LDO_5V_IN_EN", /* GPIO_73 */ + "NC", /* GPIO_74 */ + "TSP_RST_N", /* GPIO_75 */ + "NC", /* GPIO_76 */ + "TOUCHKEY_INT", /* GPIO_77 */ + "SPKR_I2S_MCLK", /* GPIO_78 */ + "SPKR_PA_INT", /* GPIO_79 */ + "SENSOR_RESET_N", /* GPIO_80 */ + "FP_SPI_MOSI", /* GPIO_81 */ + "FP_SPI_MISO", /* GPIO_82 */ + "FP_SPI_CS_N", /* GPIO_83 */ + "FP_SPI_CLK", /* GPIO_84 */ + "HIFI_SD", /* GPIO_85 */ + "CAM_VDD_1P05_EN", /* GPIO_86 */ + "MSM_TS_I2C_SDA", /* GPIO_87 */ + "MSM_TS_I2C_SCL", /* GPIO_88 */ + "NC", /* GPIO_89 */ + "ESE_SPI_CS_N", /* GPIO_90 */ + "NC", /* GPIO_91 */ + "NC", /* GPIO_92 */ + "NC", /* GPIO_93 */ + "NC", /* GPIO_94 */ + "NC", /* GPIO_95 */ + "NC", /* GPIO_96 */ + "GRFC_0", /* GPIO_97 */ + "GRFC_1", /* GPIO_98 */ + "NC", /* GPIO_99 */ + "GRFC_3", /* GPIO_100 */ + "GRFC_4", /* GPIO_101 */ + "NC", /* GPIO_102 */ + "NC", /* GPIO_103 */ + "GRFC_7", /* GPIO_104 */ + "UIM2_DATA", /* GPIO_105 */ + "UIM2_CLK", /* GPIO_106 */ + "UIM2_RESET", /* GPIO_107 */ + "UIM2_PRESENT", /* GPIO_108 */ + "UIM1_DATA", /* GPIO_109 */ + "UIM1_CLK", /* GPIO_110 */ + "UIM1_RESET", /* GPIO_111 */ + "UIM1_PRESENT", /* GPIO_112 */ + "UIM_BATT_ALARM", /* GPIO_113 */ + "GRFC_8", /* GPIO_114 */ + "GRFC_9", /* GPIO_115 */ + "TX_GTR_THRES", /* GPIO_116 */ + "ACC_INT", /* GPIO_117 */ + "GYRO_INT", /* GPIO_118 */ + "COMPASS_INT", /* GPIO_119 */ + "PROXIMITY_INT_N", /* GPIO_120 */ + "FP_IRQ", /* GPIO_121 */ + "TSP_TA", /* GPIO_122 */ + "HALL_INTR2", /* GPIO_123 */ + "HALL_INTR1", /* GPIO_124 */ + "TS_INT_N", /* GPIO_125 */ + "NC", /* GPIO_126 */ + "GRFC_11", /* GPIO_127 */ + "HIFI_PWR_EN", /* GPIO_128 */ + "EXT_GPS_LNA_EN", /* GPIO_129 */ + "NC", /* GPIO_130 */ + "NC", /* GPIO_131 */ + "NC", /* GPIO_132 */ + "GRFC_14", /* GPIO_133 */ + "GSM_TX2_PHASE_D", /* GPIO_134 */ + "HIFI_SW_SEL", /* GPIO_135 */ + "GRFC_15", /* GPIO_136 */ + "RFFE3_DATA", /* GPIO_137 */ + "RFFE3_CLK", /* GPIO_138 */ + "NC", /* GPIO_139 */ + "NC", /* GPIO_140 */ + "RFFE5_DATA", /* GPIO_141 */ + "RFFE5_CLK", /* GPIO_142 */ + "NC", /* GPIO_143 */ + "COEX_UART_TX", /* GPIO_144 */ + "COEX_UART_RX", /* GPIO_145 */ + "RFFE2_DATA", /* GPIO_146 */ + "RFFE2_CLK", /* GPIO_147 */ + "RFFE1_DATA", /* GPIO_148 */ + "RFFE1_CLK"; /* GPIO_149 */ + + touchscreen_default: touchscreen_default { + pins = "gpio75", "gpio125"; + function = "gpio"; + drive-strength = <10>; + bias-pull-up; + }; + + touchscreen_sleep: touchscreen_sleep { + pins = "gpio75", "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 52df22ab3f6a..bccc2d0b35a8 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -582,7 +582,6 @@ pcie_phy: phy@34000 { compatible = "qcom,msm8996-qmp-pcie-phy"; reg = <0x00034000 0x488>; - #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -598,12 +597,13 @@ reset-names = "phy", "common", "cfg"; status = "disabled"; - pciephy_0: lane@35000 { + pciephy_0: phy@35000 { reg = <0x00035000 0x130>, <0x00035200 0x200>, <0x00035400 0x1dc>; #phy-cells = <0>; + #clock-cells = <1>; clock-output-names = "pcie_0_pipe_clk_src"; clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; clock-names = "pipe0"; @@ -611,7 +611,7 @@ reset-names = "lane0"; }; - pciephy_1: lane@36000 { + pciephy_1: phy@36000 { reg = <0x00036000 0x130>, <0x00036200 0x200>, <0x00036400 0x1dc>; @@ -624,7 +624,7 @@ reset-names = "lane1"; }; - pciephy_2: lane@37000 { + pciephy_2: phy@37000 { reg = <0x00037000 0x130>, <0x00037200 0x200>, <0x00037400 0x1dc>; @@ -638,7 +638,7 @@ }; }; - rpm_msg_ram: memory@68000 { + rpm_msg_ram: sram@68000 { compatible = "qcom,rpm-msg-ram"; reg = <0x00068000 0x6000>; }; @@ -705,6 +705,28 @@ #thermal-sensor-cells = <1>; }; + cryptobam: dma@644000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x00644000 0x24000>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_CE1_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely = <1>; + }; + + crypto: crypto@67a000 { + compatible = "qcom,crypto-v5.4"; + reg = <0x0067a000 0x6000>; + clocks = <&gcc GCC_CE1_AHB_CLK>, + <&gcc GCC_CE1_AXI_CLK>, + <&gcc GCC_CE1_CLK>; + clock-names = "iface", "bus", "core"; + dmas = <&cryptobam 6>, <&cryptobam 7>; + dma-names = "rx", "tx"; + }; + tcsr_mutex_regs: syscon@740000 { compatible = "syscon"; reg = <0x00740000 0x40000>; @@ -1211,6 +1233,20 @@ }; }; + blsp1_uart2_default: blsp1-uart2-default { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "blsp_uart2"; + drive-strength = <16>; + bias-disable; + }; + + blsp1_uart2_sleep: blsp1-uart2-sleep { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + blsp1_i2c3_default: blsp1-i2c2-default { pins = "gpio47", "gpio48"; function = "blsp_i2c3"; @@ -1239,6 +1275,20 @@ bias-disable; }; + blsp2_i2c3_default: blsp2-i2c3 { + pins = "gpio51", "gpio52"; + function = "blsp_i2c9"; + drive-strength = <16>; + bias-disable; + }; + + blsp2_i2c3_sleep: blsp2-i2c3-sleep { + pins = "gpio51", "gpio52"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + wcd_intr_default: wcd-intr-default{ pins = "gpio54"; function = "gpio"; @@ -1495,6 +1545,11 @@ }; }; + sram@290000 { + compatible = "qcom,rpm-stats"; + reg = <0x00290000 0x10000>; + }; + spmi_bus: qcom,spmi@400f000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0400f000 0x1000>, @@ -1746,7 +1801,7 @@ reset-names = "ufsphy"; status = "disabled"; - ufsphy_lane: lanes@627400 { + ufsphy_lane: phy@627400 { reg = <0x627400 0x12c>, <0x627600 0x200>, <0x627c00 0x1b4>; @@ -2586,7 +2641,6 @@ usb3phy: phy@7410000 { compatible = "qcom,msm8996-qmp-usb3-phy"; reg = <0x07410000 0x1c4>; - #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -2601,12 +2655,13 @@ reset-names = "phy", "common"; status = "disabled"; - ssusb_phy_0: lane@7410200 { + ssusb_phy_0: phy@7410200 { reg = <0x07410200 0x200>, <0x07410400 0x130>, <0x07410600 0x1a8>; #phy-cells = <0>; + #clock-cells = <1>; clock-output-names = "usb3_phy_pipe_clk_src"; clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; clock-names = "pipe0"; @@ -2686,7 +2741,7 @@ status = "disabled"; }; - blsp1_dma: dma@7544000 { + blsp1_dma: dma-controller@7544000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07544000 0x2b000>; interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; @@ -2704,6 +2759,9 @@ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; dmas = <&blsp1_dma 2>, <&blsp1_dma 3>; dma-names = "tx", "rx"; status = "disabled"; @@ -2743,7 +2801,7 @@ status = "disabled"; }; - blsp2_dma: dma@7584000 { + blsp2_dma: dma-controller@7584000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07584000 0x2b000>; interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; @@ -2808,6 +2866,24 @@ status = "disabled"; }; + blsp2_i2c3: i2c@75b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x075b7000 0x1000>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>, + <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c3_default>; + pinctrl-1 = <&blsp2_i2c3_sleep>; + dmas = <&blsp2_dma 16>, <&blsp2_dma 17>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + blsp2_i2c5: i2c@75b9000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x75b9000 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts b/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts index db5821be1e2f..e204b7050441 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts @@ -8,6 +8,7 @@ / { model = "Asus NovaGo TP370QL"; compatible = "asus,novago-tp370ql", "qcom,msm8998"; + chassis-type = "convertible"; }; &blsp1_i2c6 { diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi index 125d7923d713..3f60575a351c 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi @@ -313,6 +313,8 @@ &ufsphy { status = "okay"; + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; }; &usb3 { diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts new file mode 100644 index 000000000000..3d495ce3f46a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts @@ -0,0 +1,320 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * <angelogioacchino.delregno@somainline.org> + */ + +/dts-v1/; + +#include "msm8998-mtp.dtsi" + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + model = "F(x)tec Pro1 (QX1000)"; + compatible = "fxtec,pro1", "qcom,msm8998"; + chassis-type = "handset"; + qcom,board-id = <0x02000b 0x10>; + + /* + * Until we hook up type-c detection, we + * have to stick with this. But it works. + */ + extcon_usb: extcon-usb { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>; + }; + + gpio-hall-sensors { + compatible = "gpio-keys"; + input-name = "hall-sensors"; + label = "Hall sensors"; + pinctrl-names = "default"; + pinctrl-0 = <&hall_sensor1_default>; + + hall-sensor1 { + label = "Keyboard Hall Sensor"; + gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>; + debounce-interval = <15>; + gpio-key,wakeup; + linux,input-type = <EV_SW>; + linux,code = <SW_KEYPAD_SLIDE>; + }; + }; + + gpio-kb-extra-keys { + compatible = "gpio-keys"; + input-name = "extra-kb-keys"; + label = "Keyboard extra keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_kb_pins_extra>; + + home { + label = "Home"; + gpios = <&tlmm 21 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOMEPAGE>; + debounce-interval = <15>; + linux,can-disable; + }; + + super-l { + label = "Super Left"; + gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; + linux,code = <KEY_FN>; + debounce-interval = <15>; + linux,can-disable; + }; + + super-r { + label = "Super Right"; + gpios = <&tlmm 33 GPIO_ACTIVE_LOW>; + linux,code = <KEY_FN>; + debounce-interval = <15>; + linux,can-disable; + }; + + shift { + label = "Shift"; + gpios = <&tlmm 114 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RIGHTSHIFT>; + debounce-interval = <15>; + linux,can-disable; + }; + + ctrl { + label = "Ctrl"; + gpios = <&tlmm 128 GPIO_ACTIVE_LOW>; + linux,code = <KEY_LEFTCTRL>; + debounce-interval = <15>; + linux,can-disable; + }; + + alt { + label = "Alt"; + gpios = <&tlmm 129 GPIO_ACTIVE_LOW>; + linux,code = <KEY_LEFTALT>; + debounce-interval = <15>; + linux,can-disable; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + input-name = "side-buttons"; + label = "Side buttons"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&vol_up_pin_a>, <&cam_focus_pin_a>, + <&cam_snapshot_pin_a>; + vol-up { + label = "Volume Up"; + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_VOLUMEUP>; + gpio-key,wakeup; + debounce-interval = <15>; + }; + + camera-snapshot { + label = "Camera Snapshot"; + gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_CAMERA>; + debounce-interval = <15>; + }; + + camera-focus { + label = "Camera Focus"; + gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_CAMERA_FOCUS>; + debounce-interval = <15>; + }; + }; + + keyboard-leds { + compatible = "gpio-leds"; + + backlight { + color = <LED_COLOR_ID_WHITE>; + default-state = "off"; + function = LED_FUNCTION_KBD_BACKLIGHT; + gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>; + label = "white:kbd_backlight"; + retain-state-suspended; + }; + + caps-lock { + color = <LED_COLOR_ID_YELLOW>; + default-state = "off"; + function = LED_FUNCTION_CAPSLOCK; + gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>; + label = "yellow:capslock"; + linux,default-trigger = "kbd-capslock"; + }; + }; + + reserved-memory { + cont_splash_mem: memory@9d400000 { + reg = <0x0 0x9d400000 0x0 0x2000000>; + no-map; + }; + + zap_shader_region: memory@f6400000 { + compatible = "shared-dma-pool"; + reg = <0x0 0xf6400000 0x0 0x2000>; + no-map; + }; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc00000 0x0 0x100000>; + console-size = <0x60000>; + ecc-size = <16>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + record-size = <0x10000>; + }; + }; + + ts_vio_vreg: ts-vio-vreg { + compatible = "regulator-fixed"; + regulator-name = "ts_vio_reg"; + startup-delay-us = <2>; + enable-active-high; + gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_vio_default>; + regulator-always-on; + }; +}; + +&blsp2_i2c1 { + status = "ok"; + + touchscreen@14 { + compatible = "goodix,gt9286"; + reg = <0x14>; + interrupt-parent = <&tlmm>; + interrupts = <125 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>; + AVDD28-supply = <&vreg_l28_3p0>; + VDDIO-supply = <&ts_vio_vreg>; + pinctrl-names = "active"; + pinctrl-0 = <&ts_rst_n>, <&ts_int_n>; + }; +}; + +&mmcc { + status = "ok"; +}; + +&mmss_smmu { + status = "ok"; +}; + +&pm8998_gpio { + vol_up_pin_a: vol-up-active { + pins = "gpio6"; + function = "normal"; + bias-pull-up; + input-enable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; + + cam_focus_pin_a: cam-focus-btn-active { + pins = "gpio7"; + function = "normal"; + bias-pull-up; + input-enable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; + + cam_snapshot_pin_a: cam-snapshot-btn-active { + pins = "gpio8"; + function = "normal"; + bias-pull-up; + input-enable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; +}; + +&pm8998_pon { + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <GIC_SPI 0x8 1 IRQ_TYPE_EDGE_BOTH>; + bias-pull-up; + debounce = <15625>; + linux,code = <KEY_VOLUMEDOWN>; + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>; + + mdp_vsync_n: mdp-vsync-n { + pins = "gpio10"; + function = "mdp_vsync_a"; + bias-pull-down; + drive-strength = <2>; + }; + + gpio_kb_pins_extra: gpio-kb-pins-extra { + pins = "gpio21", "gpio32", "gpio33", "gpio114", + "gpio128", "gpio129"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + ts_vio_default: ts-vio-def { + pins = "gpio81"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + ts_rst_n: ts-rst-n { + pins = "gpio89"; + function = "gpio"; + bias-pull-up; + drive-strength = <8>; + }; + + hall_sensor1_default: hall-sensor1-def { + pins = "gpio124"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + input-enable; + }; + + ts_int_n: ts-int-n { + pins = "gpio125"; + function = "gpio"; + bias-disable; + drive-strength = <8>; + }; +}; + +&ufshc { + status = "ok"; +}; + +&ufsphy { + status = "ok"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; + extcon = <&extcon_usb>; +}; + +/* GT9286 analog supply */ +&vreg_l28_3p0 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts b/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts index 24073127091f..1eb406b43fd7 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts @@ -8,6 +8,7 @@ / { model = "HP Envy x2"; compatible = "hp,envy-x2", "qcom,msm8998"; + chassis-type = "convertible"; }; &blsp1_i2c6 { diff --git a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts index 89492ed5196c..f55f6f3e3e5d 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts @@ -8,6 +8,7 @@ / { model = "Lenovo Miix 630"; compatible = "lenovo,miix-630", "qcom,msm8998"; + chassis-type = "convertible"; }; &blsp1_i2c6 { diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi index a1d15eab8553..af67c641df4e 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi @@ -371,10 +371,6 @@ vdda-phy-supply = <&vreg_l1a_0p875>; vdda-pll-supply = <&vreg_l2a_1p2>; vddp-ref-clk-supply = <&vreg_l26a_1p2>; - vdda-phy-max-microamp = <51400>; - vdda-pll-max-microamp = <14600>; - vddp-ref-clk-max-microamp = <100>; - vddp-ref-clk-always-on; }; &usb3 { diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts index 66b9297588ab..9563eb62db88 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts @@ -11,6 +11,7 @@ / { model = "OnePlus 5"; compatible = "oneplus,cheeseburger", "qcom,msm8998"; + chassis-type = "handset"; /* Required for bootloader to select correct board */ qcom,board-id = <8 0 16859 23>; diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi index 0f5c7828a901..654188027f79 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi @@ -480,10 +480,6 @@ vdda-phy-supply = <&vreg_l1a_0p875>; vdda-pll-supply = <&vreg_l2a_1p2>; vddp-ref-clk-supply = <&vreg_l26a_1p2>; - vdda-phy-max-microamp = <51400>; - vdda-pll-max-microamp = <14600>; - vddp-ref-clk-max-microamp = <100>; - vddp-ref-clk-always-on; }; &usb3 { diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dts b/arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dts index 544b9b0ae44b..5d0dabbaee4e 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dts @@ -10,6 +10,7 @@ / { model = "OnePlus 5T"; compatible = "oneplus,dumpling", "qcom,msm8998"; + chassis-type = "handset"; /* Required for bootloader to select correct board */ qcom,board-id = <8 0 17801 43>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts new file mode 100644 index 000000000000..caacb7c28402 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * <angelogioacchino.delregno@somainline.org> + */ + +/dts-v1/; + +#include "msm8998-sony-xperia-yoshino.dtsi" + +/ { + model = "Sony Xperia XZ1 Compact"; + compatible = "sony,xperia-lilac", "qcom,msm8998"; + chassis-type = "handset"; +}; + +&ibb { + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; +}; + +&lab { + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; + qcom,soft-start-us = <800>; +}; + +&vreg_l22a_2p85 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts new file mode 100644 index 000000000000..978495a8a6b9 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * <angelogioacchino.delregno@somainline.org> + */ + +/dts-v1/; + +#include "msm8998-sony-xperia-yoshino.dtsi" + +/ { + model = "Sony Xperia XZ Premium"; + compatible = "sony,xperia-maple", "qcom,msm8998"; + chassis-type = "handset"; + + disp_dvdd_vreg: disp-dvdd-vreg { + compatible = "regulator-fixed"; + regulator-name = "disp_dvdd_en"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + startup-delay-us = <0>; + enable-active-high; + gpio = <&pmi8998_gpio 10 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&disp_dvdd_en>; + }; +}; + +&ibb { + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; +}; + +&lab { + regulator-min-microvolt = <5800000>; + regulator-max-microvolt = <5800000>; + qcom,soft-start-us = <200>; +}; + +&pmi8998_gpio { + disp_dvdd_en: disp-dvdd-en-active { + pins = "gpio10"; + function = "normal"; + bias-disable; + drive-push-pull; + output-high; + power-source = <0>; + qcom,drive-strength = <1>; + }; +}; + +&vreg_l22a_2p85 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts new file mode 100644 index 000000000000..4a1f98a21031 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * <angelogioacchino.delregno@somainline.org> + */ + +/dts-v1/; + +#include "msm8998-sony-xperia-yoshino.dtsi" + +/ { + model = "Sony Xperia XZ1"; + compatible = "sony,xperia-poplar", "qcom,msm8998"; + chassis-type = "handset"; +}; + +&ibb { + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; +}; + +&lab { + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; + qcom,soft-start-us = <800>; +}; + +&vreg_l18a_2p85 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; +}; + +&vreg_l22a_2p85 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi new file mode 100644 index 000000000000..91e391282181 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi @@ -0,0 +1,670 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * <angelogioacchino.delregno@somainline.org> + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +#include "msm8998.dtsi" +#include "pm8005.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> + +/ { + /* required for bootloader to select correct board */ + qcom,msm-id = <0x124 0x20000>, <0x124 0x20001>; /* 8998v2, v2.1 */ + qcom,board-id = <8 0>; + + clocks { + compatible = "simple-bus"; + + div1_mclk: divclk1 { + compatible = "gpio-gate-clock"; + pinctrl-0 = <&audio_mclk_pin>; + pinctrl-names = "default"; + clocks = <&rpmcc RPM_SMD_DIV_CLK1>; + #clock-cells = <0>; + enable-gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>; + }; + }; + + board_vbat: vbat-regulator { + compatible = "regulator-fixed"; + regulator-name = "VBAT"; + + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <4000000>; + regulator-always-on; + regulator-boot-on; + }; + + cam0_vdig_vreg: cam0-vdig { + compatible = "regulator-fixed"; + regulator-name = "cam0_vdig"; + startup-delay-us = <0>; + enable-active-high; + gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cam0_vdig_default>; + }; + + cam1_vdig_vreg: cam1-vdig { + compatible = "regulator-fixed"; + regulator-name = "cam1_vdig"; + startup-delay-us = <0>; + enable-active-high; + gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cam1_vdig_default>; + vin-supply = <&vreg_s3a_1p35>; + }; + + cam_vio_vreg: cam-vio-vreg { + compatible = "regulator-fixed"; + regulator-name = "cam_vio_vreg"; + startup-delay-us = <0>; + enable-active-high; + gpio = <&pmi8998_gpio 1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cam_vio_default>; + vin-supply = <&vreg_lvs1a_1p8>; + }; + + touch_vddio_vreg: touch-vddio-vreg { + compatible = "regulator-fixed"; + regulator-name = "touch_vddio_vreg"; + startup-delay-us = <10000>; + gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_vddio_en>; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; + + gpio-keys { + compatible = "gpio-keys"; + input-name = "gpio-keys"; + label = "Side buttons"; + pinctrl-names = "default"; + pinctrl-0 = <&vol_down_pin_a>, <&cam_focus_pin_a>, + <&cam_snapshot_pin_a>; + vol-down { + label = "Volume Down"; + gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_VOLUMEDOWN>; + gpio-key,wakeup; + debounce-interval = <15>; + }; + + camera-snapshot { + label = "Camera Snapshot"; + gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_CAMERA>; + debounce-interval = <15>; + }; + + camera-focus { + label = "Camera Focus"; + gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_CAMERA_FOCUS>; + debounce-interval = <15>; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + input-name = "hall-sensors"; + label = "Hall sensors"; + pinctrl-names = "default"; + pinctrl-0 = <&hall_sensor0_default>; + + hall-sensor0 { + label = "Cover Hall Sensor"; + gpios = <&tlmm 124 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + gpio-key,wakeup; + debounce-interval = <30>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@85800000 { + reg = <0x0 0x85800000 0x0 0x3700000>; + no-map; + }; + + cont_splash_mem: memory@9d400000 { + reg = <0x0 0x9d400000 0x0 0x2400000>; + no-map; + }; + + zap_shader_region: memory@f6400000 { + compatible = "shared-dma-pool"; + reg = <0x0 0xf6400000 0x0 0x2000>; + no-map; + }; + + adsp_region: memory@fe000000 { + reg = <0x0 0xfe000000 0x0 0x800000>; + no-map; + }; + + qseecom_region: memory@fe800000 { + reg = <0x0 0xfe800000 0x0 0x1400000>; + no-map; + }; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc00000 0x0 0x100000>; + record-size = <0x10000>; + console-size = <0x60000>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + ecc-size = <16>; + }; + }; + + vibrator { + compatible = "gpio-vibrator"; + enable-gpios = <&pmi8998_gpio 5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vib_default>; + }; +}; + +&blsp1_i2c5 { + status = "okay"; + clock-frequency = <355000>; + + touchscreen@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + #address-cells = <1>; + #size-cells = <0>; + interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_n>; + + vdd-supply = <&vreg_l28_3p0>; + vio-supply = <&touch_vddio_vreg>; + + syna,reset-delay-ms = <220>; + syna,startup-delay-ms = <1000>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_i2c5_sleep { + bias-disable; +}; + +&blsp1_uart3 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + + clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>; + }; +}; + +&blsp2_uart1 { + status = "okay"; +}; + +&ibb { + regulator-min-microamp = <800000>; + regulator-max-microamp = <800000>; + regulator-enable-ramp-delay = <200>; + regulator-over-current-protection; + regulator-pull-down; + regulator-ramp-delay = <1>; + regulator-settling-time-up-us = <600>; + regulator-settling-time-down-us = <1000>; + regulator-soft-start; + qcom,discharge-resistor-kohms = <300>; +}; + +&lab { + regulator-min-microamp = <200000>; + regulator-max-microamp = <200000>; + regulator-enable-ramp-delay = <500>; + regulator-over-current-protection; + regulator-pull-down; + regulator-ramp-delay = <1>; + regulator-settling-time-up-us = <50000>; + regulator-settling-time-down-us = <3000>; + regulator-soft-start; +}; + +&mmcc { + status = "ok"; +}; + +&mmss_smmu { + status = "ok"; +}; + +&pm8005_lsid1 { + pm8005-regulators { + compatible = "qcom,pm8005-regulators"; + + vdd_s1-supply = <&vph_pwr>; + + /* VDD_GFX supply */ + pm8005_s1: s1 { + regulator-min-microvolt = <524000>; + regulator-max-microvolt = <1088000>; + regulator-enable-ramp-delay = <500>; + regulator-always-on; + }; + }; +}; + +&pm8998_gpio { + vol_down_pin_a: vol-down-active { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-pull-up; + input-enable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; + + cam_focus_pin_a: cam-focus-btn-active { + pins = "gpio7"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-pull-up; + input-enable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; + + cam_snapshot_pin_a: cam-snapshot-btn-active { + pins = "gpio8"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-pull-up; + input-enable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; + + audio_mclk_pin: audio-mclk-pin-active { + pins = "gpio13"; + function = "func2"; + power-source = <0>; + }; +}; + +&pmi8998_gpio { + cam_vio_default: cam-vio-active { + pins = "gpio1"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-disable; + drive-push-pull; + output-low; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; + power-source = <1>; + }; + + vib_default: vib-en { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-disable; + drive-push-pull; + output-low; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <0>; + }; +}; + +&pm8998_pon { + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <GIC_SPI 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEUP>; + }; +}; + +&qusb2phy { + status = "okay"; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&rpm_requests { + pm8998-regulators { + compatible = "qcom,rpm-pm8998-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_s13-supply = <&vph_pwr>; + vdd_l1_l27-supply = <&vreg_s7a_1p025>; + vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>; + vdd_l3_l11-supply = <&vreg_s7a_1p025>; + vdd_l4_l5-supply = <&vreg_s7a_1p025>; + vdd_l6-supply = <&vreg_s5a_2p04>; + vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>; + vdd_l9-supply = <&vreg_bob>; + vdd_l10_l23_l25-supply = <&vreg_bob>; + vdd_l13_l19_l21-supply = <&vreg_bob>; + vdd_l16_l28-supply = <&vreg_bob>; + vdd_l18_l22-supply = <&vreg_bob>; + vdd_l20_l24-supply = <&vreg_bob>; + vdd_l26-supply = <&vreg_s3a_1p35>; + vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: s3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + vreg_s4a_1p8: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <100000>; + regulator-allow-set-load; + }; + vreg_s5a_2p04: s5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2032000>; + }; + vreg_s7a_1p025: s7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + vreg_l1a_0p875: l1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-system-load = <73400>; + regulator-allow-set-load; + }; + vreg_l2a_1p2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-system-load = <12560>; + regulator-allow-set-load; + }; + vreg_l3a_1p0: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l5a_0p8: l5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + vreg_l6a_1p8: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l7a_1p8: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l8a_1p2: l8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l11a_1p0: l11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l13a_2p95: l13 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + }; + vreg_l14a_1p85: l14 { + regulator-min-microvolt = <1848000>; + regulator-max-microvolt = <1856000>; + regulator-system-load = <32000>; + regulator-allow-set-load; + }; + vreg_l15a_1p8: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l16a_2p7: l16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + vreg_l17a_1p3: l17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + }; + vreg_l18a_2p85: l18 {}; + vreg_l19a_2p7: l19 { + regulator-min-microvolt = <2696000>; + regulator-max-microvolt = <2704000>; + }; + vreg_l20a_2p95: l20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-system-load = <10000>; + regulator-allow-set-load; + }; + vreg_l21a_2p95: l21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-system-load = <800000>; + regulator-allow-set-load; + }; + vreg_l22a_2p85: l22 { }; + vreg_l23a_3p3: l23 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + }; + vreg_l24a_3p075: l24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + }; + vreg_l25a_3p3: l25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3312000>; + }; + vreg_l26a_1p2: l26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + vreg_l28_3p0: l28 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + vreg_lvs1a_1p8: lvs1 { }; + vreg_lvs2a_1p8: lvs2 { }; + }; + + pmi8998-regulators { + compatible = "qcom,rpm-pmi8998-regulators"; + + vdd_bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + }; + }; +}; + +&sdhc2 { + status = "okay"; + cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + mdp_vsync_n: mdp-vsync-n { + pins = "gpio10"; + function = "mdp_vsync_a"; + drive-strength = <2>; + bias-pull-down; + }; + + nfc_ven: nfc-ven { + pins = "gpio12"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-low; + }; + + msm_mclk0_default: msm-mclk0-active { + pins = "gpio13"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + msm_mclk1_default: msm-mclk1-active { + pins = "gpio14"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cci0_default: cci0-default { + pins = "gpio18", "gpio19"; + function = "cci_i2c"; + bias-disable; + drive-strength = <2>; + }; + + cci1_default: cci1-default { + pins = "gpio19", "gpio20"; + function = "cci_i2c"; + bias-disable; + drive-strength = <2>; + }; + + cam0_vdig_default: cam0-vdig-default { + pins = "gpio21"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + cam1_vdig_default: cam1-vdig-default { + pins = "gpio25"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + hall_sensor0_default: acc-cover-open { + pins = "gpio124"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + input-enable; + }; + + ts_int_n: ts-int-n { + pins = "gpio125"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_vddio_en: ts-vddio-en-default { + pins = "gpio133"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-low; + }; +}; + +/* + * WARNING: + * Disable UFS until card quirks are in to avoid unrecoverable hard-brick + * that would happen as soon as the UFS card gets probed as, without the + * required quirks, the bootloader will be erased right after card probe. + */ +&ufshc { + status = "disabled"; +}; + +&ufsphy { + status = "disabled"; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + /* Force to peripheral until we have Type-C hooked up */ + dr_mode = "peripheral"; +}; + +&usb3phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 34039b5c8017..408f265e277b 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8998.h> #include <dt-bindings/clock/qcom,gpucc-msm8998.h> +#include <dt-bindings/clock/qcom,mmcc-msm8998.h> #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/gpio/gpio.h> @@ -117,7 +118,7 @@ clock-output-names = "xo_board"; }; - sleep_clk { + sleep_clk: sleep-clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32764>; @@ -308,38 +309,42 @@ LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { compatible = "arm,idle-state"; idle-state-name = "little-retention"; + /* CPU Retention (C2D), L2 Active */ arm,psci-suspend-param = <0x00000002>; entry-latency-us = <81>; exit-latency-us = <86>; - min-residency-us = <200>; + min-residency-us = <504>; }; LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 { compatible = "arm,idle-state"; idle-state-name = "little-power-collapse"; + /* CPU + L2 Power Collapse (C3, D4) */ arm,psci-suspend-param = <0x40000003>; - entry-latency-us = <273>; - exit-latency-us = <612>; - min-residency-us = <1000>; + entry-latency-us = <814>; + exit-latency-us = <4562>; + min-residency-us = <9183>; local-timer-stop; }; BIG_CPU_SLEEP_0: cpu-sleep-1-0 { compatible = "arm,idle-state"; idle-state-name = "big-retention"; + /* CPU Retention (C2D), L2 Active */ arm,psci-suspend-param = <0x00000002>; entry-latency-us = <79>; exit-latency-us = <82>; - min-residency-us = <200>; + min-residency-us = <1302>; }; BIG_CPU_SLEEP_1: cpu-sleep-1-1 { compatible = "arm,idle-state"; idle-state-name = "big-power-collapse"; + /* CPU + L2 Power Collapse (C3, D4) */ arm,psci-suspend-param = <0x40000003>; - entry-latency-us = <336>; - exit-latency-us = <525>; - min-residency-us = <1000>; + entry-latency-us = <724>; + exit-latency-us = <2027>; + min-residency-us = <9419>; local-timer-stop; }; }; @@ -855,21 +860,24 @@ #reset-cells = <1>; #power-domain-cells = <1>; reg = <0x00100000 0xb0000>; + + clock-names = "xo", "sleep_clk"; + clocks = <&xo>, <&sleep_clk>; }; - rpm_msg_ram: memory@778000 { + rpm_msg_ram: sram@778000 { compatible = "qcom,rpm-msg-ram"; reg = <0x00778000 0x7000>; }; - qfprom: qfprom@780000 { + qfprom: qfprom@784000 { compatible = "qcom,qfprom"; - reg = <0x00780000 0x621c>; + reg = <0x00784000 0x621c>; #address-cells = <1>; #size-cells = <1>; - qusb2_hstx_trim: hstx-trim@423a { - reg = <0x423a 0x1>; + qusb2_hstx_trim: hstx-trim@23a { + reg = <0x23a 0x1>; bits = <0 4>; }; }; @@ -954,10 +962,10 @@ interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 135 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc 0 136 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc 0 138 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc 0 139 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 1 &intc 0 0 135 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 136 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 138 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 139 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, @@ -990,7 +998,7 @@ vdda-phy-supply = <&vreg_l1a_0p875>; vdda-pll-supply = <&vreg_l2a_1p2>; - pciephy: lane@1c06800 { + pciephy: phy@1c06800 { reg = <0x01c06200 0x128>, <0x01c06400 0x1fc>, <0x01c06800 0x20c>; #phy-cells = <0>; @@ -1062,7 +1070,7 @@ reset-names = "ufsphy"; resets = <&ufshc 0>; - ufsphy_lanes: lanes@1da7400 { + ufsphy_lanes: phy@1da7400 { reg = <0x01da7400 0x128>, <0x01da7600 0x1fc>, <0x01da7c00 0x1dc>, @@ -1416,6 +1424,103 @@ }; }; + adreno_gpu: gpu@5000000 { + compatible = "qcom,adreno-540.1", "qcom,adreno"; + reg = <0x05000000 0x40000>; + reg-names = "kgsl_3d0_reg_memory"; + + clocks = <&gcc GCC_GPU_CFG_AHB_CLK>, + <&gpucc RBBMTIMER_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_GPU_BIMC_GFX_CLK>, + <&gpucc RBCPR_CLK>, + <&gpucc GFX3D_CLK>; + clock-names = "iface", + "rbbmtimer", + "mem", + "mem_iface", + "rbcpr", + "core"; + + interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&adreno_smmu 0>; + operating-points-v2 = <&gpu_opp_table>; + power-domains = <&rpmpd MSM8998_VDDMX>; + #stream-id-cells = <16>; + status = "disabled"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-710000097 { + opp-hz = /bits/ 64 <710000097>; + opp-level = <RPM_SMD_LEVEL_TURBO>; + opp-supported-hw = <0xFF>; + }; + + opp-670000048 { + opp-hz = /bits/ 64 <670000048>; + opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; + opp-supported-hw = <0xFF>; + }; + + opp-596000097 { + opp-hz = /bits/ 64 <596000097>; + opp-level = <RPM_SMD_LEVEL_NOM>; + opp-supported-hw = <0xFF>; + }; + + opp-515000097 { + opp-hz = /bits/ 64 <515000097>; + opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; + opp-supported-hw = <0xFF>; + }; + + opp-414000000 { + opp-hz = /bits/ 64 <414000000>; + opp-level = <RPM_SMD_LEVEL_SVS>; + opp-supported-hw = <0xFF>; + }; + + opp-342000000 { + opp-hz = /bits/ 64 <342000000>; + opp-level = <RPM_SMD_LEVEL_LOW_SVS>; + opp-supported-hw = <0xFF>; + }; + + opp-257000000 { + opp-hz = /bits/ 64 <257000000>; + opp-level = <RPM_SMD_LEVEL_MIN_SVS>; + opp-supported-hw = <0xFF>; + }; + }; + }; + + adreno_smmu: iommu@5040000 { + compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2"; + reg = <0x05040000 0x10000>; + clocks = <&gcc GCC_GPU_CFG_AHB_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_GPU_BIMC_GFX_CLK>; + clock-names = "iface", "mem", "mem_iface"; + + #global-interrupts = <0>; + #iommu-cells = <1>; + interrupts = + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; + /* + * GPU-GX GDSC's parent is GPU-CX. We need to bring up the + * GPU-CX for SMMU but we need both of them up for Adreno. + * Contemporarily, we also need to manage the VDDMX rpmpd + * domain in the Adreno driver. + * Enable GPU CX/GX GDSCs here so that we can manage the + * SoC VDDMX RPM Power Domain in the Adreno driver. + */ + power-domains = <&gpucc GPU_GX_GDSC>; + status = "disabled"; + }; + gpucc: clock-controller@5065000 { compatible = "qcom,msm8998-gpucc"; #clock-cells = <1>; @@ -1917,6 +2022,11 @@ }; }; + sram@290000 { + compatible = "qcom,rpm-stats"; + reg = <0x00290000 0x10000>; + }; + spmi_bus: spmi@800f000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0800f000 0x1000>, @@ -1981,7 +2091,6 @@ compatible = "qcom,msm8998-qmp-usb3-phy"; reg = <0x0c010000 0x18c>; status = "disabled"; - #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -1995,13 +2104,14 @@ <&gcc GCC_USB3PHY_PHY_BCR>; reset-names = "phy", "common"; - usb1_ssphy: lane@c010200 { + usb1_ssphy: phy@c010200 { reg = <0xc010200 0x128>, <0xc010400 0x200>, <0xc010c00 0x20c>, <0xc010600 0x128>, <0xc010800 0x200>; #phy-cells = <0>; + #clock-cells = <1>; clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "usb3_phy_pipe_clk_src"; @@ -2187,7 +2297,7 @@ #size-cells = <0>; }; - blsp2_dma: dma@c184000 { + blsp2_dma: dma-controller@c184000 { compatible = "qcom,bam-v1.7.0"; reg = <0x0c184000 0x25000>; interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; @@ -2330,6 +2440,73 @@ #size-cells = <0>; }; + mmcc: clock-controller@c8c0000 { + compatible = "qcom,mmcc-msm8998"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0xc8c0000 0x40000>; + status = "disabled"; + + clock-names = "xo", + "gpll0", + "dsi0dsi", + "dsi0byte", + "dsi1dsi", + "dsi1byte", + "hdmipll", + "dplink", + "dpvco", + "core_bi_pll_test_se"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_MMSS_GPLL0_CLK>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>; + }; + + mmss_smmu: iommu@cd00000 { + compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2"; + reg = <0x0cd00000 0x40000>; + #iommu-cells = <1>; + + clocks = <&mmcc MNOC_AHB_CLK>, + <&mmcc BIMC_SMMU_AHB_CLK>, + <&rpmcc RPM_SMD_MMAXI_CLK>, + <&mmcc BIMC_SMMU_AXI_CLK>; + clock-names = "iface-mm", "iface-smmu", + "bus-mm", "bus-smmu"; + status = "disabled"; + + #global-interrupts = <0>; + interrupts = + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + }; + remoteproc_adsp: remoteproc@17300000 { compatible = "qcom,msm8998-adsp-pas"; reg = <0x17300000 0x4040>; diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi index b49860cd1387..3ca2860bb0cf 100644 --- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: BSD-3-Clause // Copyright (c) 2019, The Linux Foundation. All rights reserved. +#include <dt-bindings/iio/qcom,spmi-vadc.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> diff --git a/arch/arm64/boot/dts/qcom/pm6350.dtsi b/arch/arm64/boot/dts/qcom/pm6350.dtsi new file mode 100644 index 000000000000..c5d85064562b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm6350.dtsi @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz> + */ + +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmic@0 { + compatible = "qcom,pm6350", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm6350_pon: pon@800 { + compatible = "qcom,pm8998-pon"; + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pm6350_pwrkey: pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + + pm6350_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; + }; + + pm6350_gpios: gpios@c000 { + compatible = "qcom,pm6350-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@1 { + compatible = "qcom,pm6350", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi index e847d7209afc..d0ef8a1675e2 100644 --- a/arch/arm64/boot/dts/qcom/pm660.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660.dtsi @@ -49,9 +49,10 @@ }; pon: pon@800 { - compatible = "qcom,pm8916-pon"; - + compatible = "qcom,pm8998-pon"; reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; pwrkey { compatible = "qcom,pm8941-pwrkey"; diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi index 05086cbe573b..cfef42353611 100644 --- a/arch/arm64/boot/dts/qcom/pm660l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi @@ -72,13 +72,6 @@ interrupt-names = "ovp"; label = "backlight"; - qcom,switching-freq = <800>; - qcom,ovp-millivolt = <29600>; - qcom,current-boost-limit = <970>; - qcom,current-limit-microamp = <20000>; - qcom,num-strings = <2>; - qcom,enabled-strings = <0 1>; - status = "disabled"; }; diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index f931cb0de231..d58902432812 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -41,6 +41,14 @@ }; }; + pm8916_usbin: extcon@1300 { + compatible = "qcom,pm8941-misc"; + reg = <0x1300>; + interrupts = <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "usb_vbus"; + status = "disabled"; + }; + pm8916_temp: temp-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; reg = <0x2400>; @@ -86,19 +94,17 @@ rtc@6000 { compatible = "qcom,pm8941-rtc"; reg = <0x6000>; - reg-names = "rtc", "alarm"; interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; pm8916_mpps: mpps@a000 { - compatible = "qcom,pm8916-mpp"; + compatible = "qcom,pm8916-mpp", "qcom,spmi-mpp"; reg = <0xa000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, - <0 0xa1 0 IRQ_TYPE_NONE>, - <0 0xa2 0 IRQ_TYPE_NONE>, - <0 0xa3 0 IRQ_TYPE_NONE>; + gpio-ranges = <&pm8916_mpps 0 0 4>; + interrupt-controller; + #interrupt-cells = <2>; }; pm8916_gpios: gpios@c000 { diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi index ad19016df047..5ab46117d737 100644 --- a/arch/arm64/boot/dts/qcom/pm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi @@ -119,18 +119,13 @@ }; pm8994_mpps: mpps@a000 { - compatible = "qcom,pm8994-mpp"; + compatible = "qcom,pm8994-mpp", "qcom,spmi-mpp"; reg = <0xa000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, - <0 0xa1 0 IRQ_TYPE_NONE>, - <0 0xa2 0 IRQ_TYPE_NONE>, - <0 0xa3 0 IRQ_TYPE_NONE>, - <0 0xa4 0 IRQ_TYPE_NONE>, - <0 0xa5 0 IRQ_TYPE_NONE>, - <0 0xa6 0 IRQ_TYPE_NONE>, - <0 0xa7 0 IRQ_TYPE_NONE>; + gpio-ranges = <&pm8994_mpps 0 0 8>; + interrupt-controller; + #interrupt-cells = <2>; }; }; diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi index b4ac900ab115..6e7c252568e6 100644 --- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi @@ -38,11 +38,8 @@ reg = <0xd800 0xd900>; interrupts = <3 0xd8 0x02 IRQ_TYPE_EDGE_RISING>; interrupt-names = "short"; - qcom,num-strings = <3>; - /* Yes, all four strings *have to* be defined or things won't work. */ - qcom,enabled-strings = <0 1 2 3>; qcom,cabc; - qcom,eternal-pfet; + qcom,external-pfet; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi index d230c510d4b7..0fef5f113f05 100644 --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi @@ -41,5 +41,17 @@ interrupt-names = "sc-err", "ocp"; }; }; + + pmi8998_wled: leds@d800 { + compatible = "qcom,pmi8998-wled"; + reg = <0xd800 0xd900>; + interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>, + <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ovp", "short"; + label = "backlight"; + + status = "disabled"; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi index 04fc2632a0b2..769f9726806f 100644 --- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi +++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi @@ -59,6 +59,7 @@ reg = <0x6100>, <0x6200>; reg-names = "rtc", "alarm"; interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; }; pmk8350_gpios: gpio@b000 { diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index 339790ba585d..6db753b49326 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -318,7 +318,7 @@ status = "disabled"; }; - rpm_msg_ram: memory@60000 { + rpm_msg_ram: sram@60000 { compatible = "qcom,rpm-msg-ram"; reg = <0x00060000 0x6000>; }; @@ -719,6 +719,11 @@ reg = <0x01937000 0x25000>; }; + sram@290000 { + compatible = "qcom,rpm-stats"; + reg = <0x00290000 0x10000>; + }; + spmi_bus: spmi@200f000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0200f000 0x001000>, diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index 28d5b5528516..845eb7a6bf92 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -16,6 +16,8 @@ / { model = "Qualcomm Technologies, Inc. Robotics RB5"; compatible = "qcom,qrb5165-rb5", "qcom,sm8250"; + qcom,msm-id = <455 0x20001>; + qcom,board-id = <11 3>; aliases { serial0 = &uart12; @@ -1222,9 +1224,7 @@ status = "okay"; vdda-phy-supply = <&vreg_l5a_0p88>; - vdda-max-microamp = <89900>; vdda-pll-supply = <&vreg_l9a_1p2>; - vdda-pll-max-microamp = <18800>; }; &usb_1 { diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts index 5ae2ddc65f7e..8756c2b25c7e 100644 --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts @@ -307,6 +307,16 @@ status = "okay"; }; +&remoteproc_adsp { + status = "okay"; + firmware-name = "qcom/sa8155p/adsp.mdt"; +}; + +&remoteproc_cdsp { + status = "okay"; + firmware-name = "qcom/sa8155p/cdsp.mdt"; +}; + &uart2 { status = "okay"; }; @@ -328,9 +338,7 @@ status = "okay"; vdda-phy-supply = <&vreg_l8c_1p2>; - vdda-max-microamp = <87100>; vdda-pll-supply = <&vreg_l5a_0p88>; - vdda-pll-max-microamp = <18300>; }; &usb_1 { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts index 21b516e0694a..8290d036044a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts @@ -23,6 +23,20 @@ status = "disabled"; }; +&pm6150_adc { + status = "disabled"; + + /delete-node/ skin-temp-thermistor@4e; + /delete-node/ charger-thermistor@4f; +}; + +&pm6150_adc_tm { + status = "disabled"; + + /delete-node/ charger-thermistor@0; + /delete-node/ skin-temp-thermistor@1; +}; + /* * CoachZ rev1 is stuffed with a 47k NTC as thermistor for skin temperature, * which currently is not supported by the PM6150 ADC driver. Disable the diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi index a758e4d22612..14ed09f30a73 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi @@ -11,6 +11,7 @@ ap_ec_spi: &spi6 {}; ap_h1_spi: &spi0 {}; #include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" /* Deleted nodes from trogdor.dtsi */ @@ -33,7 +34,7 @@ ap_h1_spi: &spi0 {}; polling-delay = <0>; thermal-sensors = <&pm6150_adc_tm 1>; - sustainable-power = <814>; + sustainable-power = <965>; trips { skin_temp_alert0: trip-point0 { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts new file mode 100644 index 000000000000..db6c2da67cea --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Homestar board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor-homestar.dtsi" + +/ { + model = "Google Homestar (rev2)"; + compatible = "google,homestar-rev2","google,homestar-rev23", "qcom,sc7180"; +}; + +&panel { + /delete-property/hpd-gpios; + no-hpd; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts new file mode 100644 index 000000000000..3fd8aa5bb7a6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Homestar board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor-homestar.dtsi" + +/ { + model = "Google Homestar (rev3+)"; + compatible = "google,homestar", "qcom,sc7180"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi new file mode 100644 index 000000000000..4ab890b2a1d4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi @@ -0,0 +1,336 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Homestar board device tree source + * + * Copyright 2021 Google LLC. + */ + +#include "sc7180.dtsi" + +ap_ec_spi: &spi6 {}; +ap_h1_spi: &spi0 {}; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" + +/ { + /* BOARD-SPECIFIC TOP LEVEL NODES */ + + max98360a_1: max98360a_1 { + compatible = "maxim,max98360a"; + #sound-dai-cells = <0>; + }; + + max98360a_2: max98360a_2 { + compatible = "maxim,max98360a"; + #sound-dai-cells = <0>; + }; + + max98360a_3: max98360a_3 { + compatible = "maxim,max98360a"; + #sound-dai-cells = <0>; + }; + + pp3300_touch: pp3300-touch { + compatible = "regulator-fixed"; + regulator-name = "pp3300_touch"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_touch>; + + vin-supply = <&pp3300_a>; + }; + + thermal-zones { + skin_temp_thermal: skin-temp-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&pm6150_adc_tm 1>; + sustainable-power = <965>; + + trips { + skin_temp_alert0: trip-point0 { + temperature = <55000>; + hysteresis = <1000>; + type = "passive"; + }; + + skin_temp_alert1: trip-point1 { + temperature = <58000>; + hysteresis = <1000>; + type = "passive"; + }; + + skin-temp-crit { + temperature = <73000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&skin_temp_alert0>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&skin_temp_alert1>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; +}; + +&ap_tp_i2c { + status = "disabled"; +}; + +ap_ts_pen_1v8: &i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@14 { + compatible = "goodix,gt7375p"; + reg = <0x14>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + + vdd-supply = <&pp3300_touch>; + }; +}; + +/* Panel controls backlight over aux channel */ + +&backlight { + status = "disabled"; +}; + +&camcc { + status = "okay"; +}; + +&panel { + compatible = "samsung,atna33xc20"; + enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + /delete-property/ backlight; +}; + +&pm6150_adc { + skin-temp-thermistor@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm6150_adc_tm { + status = "okay"; + + skin-temp-thermistor@1 { + reg = <1>; + io-channels = <&pm6150_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pp3300_dx_edp { + gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; +}; + +&secondary_mi2s { + qcom,playback-sd-lines = <0 1>; +}; + +&sound_multimedia1_codec { + sound-dai = <&max98360a>, <&max98360a_1>, <&max98360a_2>, <&max98360a_3> ; +}; + +&wifi { + qcom,ath10k-calibration-variant = "GO_HOMESTAR"; +}; + +/* PINCTRL - modifications to sc7180-trogdor.dtsi */ + +&en_pp3300_dx_edp { + pinmux { + pins = "gpio67"; + }; + + pinconf { + pins = "gpio67"; + }; +}; + +&sec_mi2s_active{ + pinmux { + pins = "gpio49", "gpio50", "gpio51", "gpio52"; + function = "mi2s_1"; + }; +}; + +&ts_reset_l { + pinconf { + /* + * We want reset state by default and it will be up to the + * driver to disable this when it's ready. + */ + output-low; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "HUB_RST_L", + "AP_RAM_ID0", + "AP_SKU_ID2", + "AP_RAM_ID1", + "", + "AP_RAM_ID2", + "UF_CAM_EN", + "WF_CAM_EN", + "TS_RESET_L", + "TS_INT_L", + "", + "EDP_BRIJ_IRQ", + "AP_EDP_BKLTEN", + "UF_CAM_MCLK", + "WF_CAM_CLK", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "UF_CAM_SDA", + "UF_CAM_SCL", + "WF_CAM_SDA", + "WF_CAM_SCL", + "AVEE_LCD_EN", + "", + "AMP_EN", + "AMP_EN2", + "AP_SAR_SENSOR_SDA", + "AP_SAR_SENSOR_SCL", + "SEL_LCM", + "HP_IRQ", + "WF_CAM_RST_L", + "UF_CAM_RST_L", + "AP_BRD_ID2", + "BRIJ_SUSPEND", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "BT_UART_CTS", + "BT_UART_RTS", + "BT_UART_TXD", + "BT_UART_RXD", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "HP_I2C_SDA", + "HP_I2C_SCL", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DIN", + "AMP_DIN_2", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "AP_SKU_ID0", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "EN_PP3300_DX_EDP", + "AP_SPI_CS0_L", + "SD_CD_ODL", + "", + "", + "", + "WLAN_SW_CTRL", + "", + "REPORT_E", + "VDD_RESET_1.8V", + "ID0", + "", + "ID1", + "AVDD_LCD_EN", + "MIPI_1.8V_EN", + "", + "CODEC_PWR_EN", + "HUB_EN", + "", + "PP1800_MIPI_SW_EN", + "EN_PP3300_TOUCH", + "", + "", + "AP_SKU_ID1", + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "SDM_GRFC_3", + "", + "", + "BOOT_CONFIG_4", + "BOOT_CONFIG_2", + "", + "", + "", + "", + "EDP_BRIJ_EN", + "", + "", + "BOOT_CONFIG_3", + "WCI2_LTE_COEX_TXD", + "WCI2_LTE_COEX_RXD", + "", + "", + "", + "", + "FORCED_USB_BOOT_POL", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; + + en_pp3300_touch: en-pp3300-touch { + pinmux { + pins = "gpio87"; + function = "gpio"; + }; + + pinconf { + pins = "gpio87"; + drive-strength = <2>; + bias-disable; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi index 00535aaa43c9..8b79fbb75756 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi @@ -11,6 +11,7 @@ ap_ec_spi: &spi6 {}; ap_h1_spi: &spi0 {}; #include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" &ap_sar_sensor { semtech,cs0-ground; @@ -54,6 +55,18 @@ ap_ts_pen_1v8: &i2c4 { compatible = "boe,nv133fhm-n62"; }; +&pm6150_adc { + status = "disabled"; + + /delete-node/ charger-thermistor@4f; +}; + +&pm6150_adc_tm { + status = "disabled"; + + /delete-node/ charger-thermistor@0; +}; + &trackpad { interrupts = <58 IRQ_TYPE_EDGE_FALLING>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi index 469aad4e5948..fd4b71203754 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi @@ -17,3 +17,14 @@ firmware-name = "qcom/sc7180-trogdor/modem/mba.mbn", "qcom/sc7180-trogdor/modem/qdsp6sw.mbn"; }; + +&ipa { + status = "okay"; + + /* + * Trogdor doesn't have QHEE (Qualcomm's EL2 blob), so the + * modem needs to cover certain init steps (GSI init), and + * the AP needs to wait for it. + */ + modem-init; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi new file mode 100644 index 000000000000..a3d69540d4e4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Trogdor dts fragment for the boards with Parade ps8640 edp bridge + * + * Copyright 2021 Google LLC. + */ + +/ { + pp3300_brij_ps8640: pp3300-brij-ps8640 { + compatible = "regulator-fixed"; + status = "okay"; + regulator-name = "pp3300_brij_ps8640"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 32 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_edp_brij_ps8640>; + + vin-supply = <&pp3300_a>; + }; +}; + +&dsi0_out { + remote-endpoint = <&ps8640_in>; +}; + +edp_brij_i2c: &i2c2 { + status = "okay"; + clock-frequency = <400000>; + + ps8640_bridge: bridge@8 { + compatible = "parade,ps8640"; + reg = <0x8>; + + powerdown-gpios = <&tlmm 104 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 11 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_brij_en>, <&edp_brij_ps8640_rst>; + + vdd12-supply = <&pp1200_brij>; + vdd33-supply = <&pp3300_brij_ps8640>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + ps8640_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + ps8640_out: endpoint { + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + + aux-bus { + panel: panel { + /* Compatible will be filled in per-board */ + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&ps8640_out>; + }; + }; + }; + }; + }; +}; + +&tlmm { + edp_brij_ps8640_rst: edp-brij-ps8640-rst { + pinmux { + pins = "gpio11"; + function = "gpio"; + }; + + pinconf { + pins = "gpio11"; + drive-strength = <2>; + bias-disable; + }; + }; + + en_pp3300_edp_brij_ps8640: en-pp3300-edp-brij-ps8640 { + pinmux { + pins = "gpio32"; + function = "gpio"; + }; + + pinconf { + pins = "gpio32"; + drive-strength = <2>; + bias-disable; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts index e122a6b481ff..76a130bad60a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts @@ -26,6 +26,14 @@ status = "disabled"; }; +&pm6150_adc { + /delete-node/ charger-thermistor@4f; +}; + +&pm6150_adc_tm { + /delete-node/ charger-thermistor@0; +}; + &pp3300_hub { /* pp3300_l7c is used to power the USB hub */ /delete-property/regulator-always-on; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts index 4f32e6733f4c..88cf2246c18a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts @@ -22,3 +22,11 @@ &charger_thermal { status = "disabled"; }; + +&pm6150_adc { + /delete-node/ charger-thermistor@4f; +}; + +&pm6150_adc_tm { + /delete-node/ charger-thermistor@0; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi index a246dbd74cc1..e90f99ef5323 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi @@ -11,6 +11,7 @@ ap_ec_spi: &spi6 {}; ap_h1_spi: &spi0 {}; #include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" / { thermal-zones { @@ -44,7 +45,7 @@ ap_h1_spi: &spi0 {}; }; &cpu6_thermal { - sustainable-power = <948>; + sustainable-power = <1124>; }; &cpu7_alert0 { @@ -56,7 +57,7 @@ ap_h1_spi: &spi0 {}; }; &cpu7_thermal { - sustainable-power = <948>; + sustainable-power = <1124>; }; &cpu8_alert0 { @@ -68,7 +69,7 @@ ap_h1_spi: &spi0 {}; }; &cpu8_thermal { - sustainable-power = <948>; + sustainable-power = <1124>; }; &cpu9_alert0 { @@ -80,7 +81,7 @@ ap_h1_spi: &spi0 {}; }; &cpu9_thermal { - sustainable-power = <948>; + sustainable-power = <1124>; }; &gpio_keys { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts index 2b522f9e0d8f..457c25499863 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts @@ -13,6 +13,7 @@ ap_ec_spi: &spi6 {}; ap_h1_spi: &spi0 {}; #include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" / { model = "Google Trogdor (rev1+)"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi new file mode 100644 index 000000000000..97d5e45abd1d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Trogdor dts fragment for the boards with TI sn65dsi86 edp bridge + * + * Copyright 2021 Google LLC. + */ + +&dsi0_out { + remote-endpoint = <&sn65dsi86_in>; + data-lanes = <0 1 2 3>; +}; + +edp_brij_i2c: &i2c2 { + status = "okay"; + clock-frequency = <400000>; + + sn65dsi86_bridge: bridge@2d { + compatible = "ti,sn65dsi86"; + reg = <0x2d>; + pinctrl-names = "default"; + pinctrl-0 = <&edp_brij_en>, <&edp_brij_irq>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&tlmm>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>; + + vpll-supply = <&pp1800_edp_vpll>; + vccio-supply = <&pp1800_brij_vccio>; + vcca-supply = <&pp1200_brij>; + vcc-supply = <&pp1200_brij>; + + clocks = <&rpmhcc RPMH_LN_BB_CLK3>; + clock-names = "refclk"; + + no-hpd; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + sn65dsi86_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + sn65dsi86_out: endpoint { + data-lanes = <0 1>; + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + + aux-bus { + panel: panel { + /* Compatible will be filled in per-board */ + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; + }; +}; + +&tlmm { + edp_brij_irq: edp-brij-irq { + pinmux { + pins = "gpio11"; + function = "gpio"; + }; + + pinconf { + pins = "gpio11"; + drive-strength = <2>; + bias-pull-down; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index 70c88c37de32..d4f4441179fc 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -601,15 +601,6 @@ &dsi0 { status = "okay"; vdda-supply = <&vdda_mipi_dsi0_1p2>; - - ports { - port@1 { - endpoint { - remote-endpoint = <&sn65dsi86_in>; - data-lanes = <0 1 2 3>; - }; - }; - }; }; &dsi_phy { @@ -617,70 +608,6 @@ vdds-supply = <&vdda_mipi_dsi0_pll>; }; -edp_brij_i2c: &i2c2 { - status = "okay"; - clock-frequency = <400000>; - - sn65dsi86_bridge: bridge@2d { - compatible = "ti,sn65dsi86"; - reg = <0x2d>; - pinctrl-names = "default"; - pinctrl-0 = <&edp_brij_en>, <&edp_brij_irq>; - gpio-controller; - #gpio-cells = <2>; - - interrupt-parent = <&tlmm>; - interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; - - enable-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>; - - vpll-supply = <&pp1800_edp_vpll>; - vccio-supply = <&pp1800_brij_vccio>; - vcca-supply = <&pp1200_brij>; - vcc-supply = <&pp1200_brij>; - - clocks = <&rpmhcc RPMH_LN_BB_CLK3>; - clock-names = "refclk"; - - no-hpd; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - sn65dsi86_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - - port@1 { - reg = <1>; - sn65dsi86_out: endpoint { - data-lanes = <0 1>; - remote-endpoint = <&panel_in_edp>; - }; - }; - }; - - aux-bus { - panel: panel { - /* Compatible will be filled in per-board */ - power-supply = <&pp3300_dx_edp>; - backlight = <&backlight>; - hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; - - port { - panel_in_edp: endpoint { - remote-endpoint = <&sn65dsi86_out>; - }; - }; - }; - }; - }; -}; - ap_sar_sensor_i2c: &i2c5 { clock-frequency = <400000>; @@ -750,17 +677,6 @@ hp_i2c: &i2c9 { }; }; -&ipa { - status = "okay"; - - /* - * Trogdor doesn't have QHEE (Qualcomm's EL2 blob), so the - * modem needs to cover certain init steps (GSI init), and - * the AP needs to wait for it. - */ - modem-init; -}; - &lpass_cpu { status = "okay"; @@ -1244,19 +1160,6 @@ ap_spi_fp: &spi10 { }; }; - edp_brij_irq: edp-brij-irq { - pinmux { - pins = "gpio11"; - function = "gpio"; - }; - - pinconf { - pins = "gpio11"; - drive-strength = <2>; - bias-pull-down; - }; - }; - en_pp3300_codec: en-pp3300-codec { pinmux { pins = "gpio83"; @@ -1523,13 +1426,13 @@ ap_spi_fp: &spi10 { pinconf-cmd { pins = "sdc1_cmd"; bias-pull-up; - drive-strength = <10>; + drive-strength = <16>; }; pinconf-data { pins = "sdc1_data"; bias-pull-up; - drive-strength = <10>; + drive-strength = <16>; }; pinconf-rclk { diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index c8921e2d6480..faf8b807d0ff 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -15,7 +15,6 @@ #include <dt-bindings/interconnect/qcom,sc7180.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/phy/phy-qcom-qusb2.h> -#include <dt-bindings/power/qcom-aoss-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/reset/qcom,sdm845-aoss.h> #include <dt-bindings/reset/qcom,sdm845-pdc.h> @@ -137,8 +136,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <415>; + dynamic-power-coefficient = <137>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; @@ -162,8 +161,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <415>; + dynamic-power-coefficient = <137>; next-level-cache = <&L2_100>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -184,8 +183,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <415>; + dynamic-power-coefficient = <137>; next-level-cache = <&L2_200>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -206,8 +205,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <415>; + dynamic-power-coefficient = <137>; next-level-cache = <&L2_300>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -228,8 +227,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <415>; + dynamic-power-coefficient = <137>; next-level-cache = <&L2_400>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -250,8 +249,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <415>; + dynamic-power-coefficient = <137>; next-level-cache = <&L2_500>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -272,8 +271,8 @@ cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <1740>; - dynamic-power-coefficient = <405>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <480>; next-level-cache = <&L2_600>; operating-points-v2 = <&cpu6_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -294,8 +293,8 @@ cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <1740>; - dynamic-power-coefficient = <405>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <480>; next-level-cache = <&L2_700>; operating-points-v2 = <&cpu6_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -1922,14 +1921,15 @@ clock-names = "iface", "bus", "nav", "snoc_axi", "mnoc_axi", "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>, - <&rpmhpd SC7180_CX>, + power-domains = <&rpmhpd SC7180_CX>, <&rpmhpd SC7180_MX>, <&rpmhpd SC7180_MSS>; - power-domain-names = "load_state", "cx", "mx", "mss"; + power-domain-names = "cx", "mx", "mss"; memory-region = <&mpss_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&modem_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -2647,7 +2647,7 @@ }; qspi: spi@88dc000 { - compatible = "qcom,qspi-v1"; + compatible = "qcom,sc7180-qspi", "qcom,qspi-v1"; reg = <0 0x088dc000 0 0x600>; #address-cells = <1>; #size-cells = <0>; @@ -3219,12 +3219,16 @@ aoss_qmp: power-controller@c300000 { compatible = "qcom,sc7180-aoss-qmp"; - reg = <0 0x0c300000 0 0x100000>; + reg = <0 0x0c300000 0 0x400>; interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; mboxes = <&apss_shared 0>; #clock-cells = <0>; - #power-domain-cells = <1>; + }; + + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; }; spmi_bus: spmi@c440000 { @@ -3246,6 +3250,21 @@ cell-index = <0>; }; + imem@146aa000 { + compatible = "simple-mfd"; + reg = <0 0x146aa000 0 0x2000>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0 0x146aa000 0x2000>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + apps_smmu: iommu@15000000 { compatible = "qcom,sc7180-smmu-500", "arm,mmu-500"; reg = <0 0x15000000 0 0x100000>; @@ -3616,7 +3635,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 1>; - sustainable-power = <768>; + sustainable-power = <1052>; trips { cpu0_alert0: trip-point0 { @@ -3665,7 +3684,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 2>; - sustainable-power = <768>; + sustainable-power = <1052>; trips { cpu1_alert0: trip-point0 { @@ -3714,7 +3733,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 3>; - sustainable-power = <768>; + sustainable-power = <1052>; trips { cpu2_alert0: trip-point0 { @@ -3763,7 +3782,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 4>; - sustainable-power = <768>; + sustainable-power = <1052>; trips { cpu3_alert0: trip-point0 { @@ -3812,7 +3831,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 5>; - sustainable-power = <768>; + sustainable-power = <1052>; trips { cpu4_alert0: trip-point0 { @@ -3861,7 +3880,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 6>; - sustainable-power = <768>; + sustainable-power = <1052>; trips { cpu5_alert0: trip-point0 { @@ -3910,7 +3929,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 9>; - sustainable-power = <1202>; + sustainable-power = <1425>; trips { cpu6_alert0: trip-point0 { @@ -3951,7 +3970,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 10>; - sustainable-power = <1202>; + sustainable-power = <1425>; trips { cpu7_alert0: trip-point0 { @@ -3992,7 +4011,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 11>; - sustainable-power = <1202>; + sustainable-power = <1425>; trips { cpu8_alert0: trip-point0 { @@ -4033,7 +4052,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 12>; - sustainable-power = <1202>; + sustainable-power = <1425>; trips { cpu9_alert0: trip-point0 { diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dts new file mode 100644 index 000000000000..7a92679a688b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Herobrine board device tree source + * + * Copyright 2021 Google LLC. + */ + +#include "sc7280-herobrine.dtsi" + +/ { + model = "Google Herobrine"; + compatible = "google,herobrine", + "qcom,sc7280"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi new file mode 100644 index 000000000000..4619fa9fcacd --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi @@ -0,0 +1,1412 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Herobrine board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "sc7280.dtsi" + +/* PMICs depend on spmi_bus label and so must come after SoC */ +#include "pm7325.dtsi" +#include "pm8350c.dtsi" +#include "pmk8350.dtsi" + +/* + * Reserved memory changes + * + * Delete all unused memory nodes and define the peripheral memory regions + * required by the board dts. + * + */ + +/delete-node/ &hyp_mem; +/delete-node/ &xbl_mem; +/delete-node/ &sec_apps_mem; + +/* Increase the size from 2MB to 8MB */ +&rmtfs_mem { + reg = <0x0 0x83600000 0x0 0x800000>; +}; + +/ { + reserved-memory { + adsp_mem: memory@86700000 { + reg = <0x0 0x86700000 0x0 0x2800000>; + no-map; + }; + + camera_mem: memory@8ad00000 { + reg = <0x0 0x8ad00000 0x0 0x500000>; + no-map; + }; + + venus_mem: memory@8b200000 { + reg = <0x0 0x8b200000 0x0 0x500000>; + no-map; + }; + + mpss_mem: memory@8b800000 { + reg = <0x0 0x8b800000 0x0 0xf600000>; + no-map; + }; + + wpss_mem: memory@9ae00000 { + reg = <0x0 0x9ae00000 0x0 0x1900000>; + no-map; + }; + + mba_mem: memory@9c700000 { + reg = <0x0 0x9c700000 0x0 0x200000>; + no-map; + }; + }; + + aliases { + serial0 = &uart5; + serial1 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + /* FIXED REGULATORS - parents above children */ + + /* This is the top level supply and variable voltage */ + ppvar_sys: ppvar-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "ppvar_sys"; + regulator-always-on; + regulator-boot-on; + }; + + /* This divides ppvar_sys by 2, so voltage is variable */ + src_vph_pwr: src-vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "src_vph_pwr"; + + /* EC turns on with switchcap_on; always on for AP */ + regulator-always-on; + regulator-boot-on; + + vin-supply = <&ppvar_sys>; + }; + + pp5000_s3: pp5000-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp5000_s3"; + + /* EC turns on with en_pp5000_s3; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + vin-supply = <&ppvar_sys>; + }; + + pp3300_z1: pp3300-z1-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_z1"; + + /* EC turns on with en_pp3300_z1; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + vin-supply = <&ppvar_sys>; + }; + + pp3300_audio: + pp3300_codec: pp3300-codec-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_codec"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_codec>; + + vin-supply = <&pp3300_z1>; + }; + + pp3300_cam: + pp3300_edp: + pp3300_ts: pp3300-edp-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_edp"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_dx_edp>; + + vin-supply = <&pp3300_z1>; + }; + + pp3300_fp: + pp3300_fp_ls: + pp3300_mcu: pp3300-fp-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_fp"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-boot-on; + regulator-always-on; + + /* + * WARNING: it is intentional that GPIO 42 isn't listed here. + * The userspace script for updating the fingerprint firmware + * needs to control the FP regulators during a FW update, + * hence the signal can't be owned by the kernel regulator. + */ + + pinctrl-names = "default"; + pinctrl-0 = <&en_fp_rails>; + + vin-supply = <&pp3300_z1>; + }; + + pp3300_hub: pp3300-hub-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_hub"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-boot-on; + regulator-always-on; + + gpio = <&tlmm 24 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_hub>; + + vin-supply = <&pp3300_z1>; + }; + + pp3300_tp: pp3300-tp-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_tp"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + /* AP turns on with PP1800_L18B_S0; always on for AP */ + regulator-always-on; + regulator-boot-on; + + vin-supply = <&pp3300_z1>; + }; + + pp2850_uf_cam: pp2850-uf-cam { + compatible = "regulator-fixed"; + regulator-name = "pp2850_uf_cam"; + + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + + gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&uf_cam_en>; + + vin-supply = <&pp3300_cam>; + }; + + pp2850_vcm_wf_cam: pp2850-vcm-wf-cam { + compatible = "regulator-fixed"; + regulator-name = "pp2850_vcm_wf_cam"; + + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + + gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&wf_cam_en>; + + vin-supply = <&pp3300_cam>; + }; + + pp2850_wf_cam: pp2850-wf-cam { + compatible = "regulator-fixed"; + regulator-name = "pp2850_wf_cam"; + + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + + gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + /* + * The pinconf can only be referenced once so we put it on the + * first regulator and comment it out here. + * + * pinctrl-names = "default"; + * pinctrl-0 = <&wf_cam_en>; + */ + + vin-supply = <&pp3300_cam>; + }; + + pp1800_fp: pp1800-fp-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp1800_fp"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-boot-on; + regulator-always-on; + + /* + * WARNING: it is intentional that GPIO 42 isn't listed here. + * The userspace script for updating the fingerprint firmware + * needs to control the FP regulators during a FW update, + * hence the signal can't be owned by the kernel regulator. + */ + + pinctrl-names = "default"; + pinctrl-0 = <&en_fp_rails>; + + vin-supply = <&pp1800_l18b_s0>; + status = "disabled"; + }; + + pp1800_uf_cam: pp1800-uf-cam { + compatible = "regulator-fixed"; + regulator-name = "pp1800_uf_cam"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + /* + * The pinconf can only be referenced once so we put it on the + * first regulator and comment it out here. + * + * pinctrl-names = "default"; + * pinctrl-0 = <&uf_cam_en>; + */ + + vin-supply = <&pp1800_l19b>; + }; + + pp1800_wf_cam: pp1800-wf-cam { + compatible = "regulator-fixed"; + regulator-name = "pp1800_wf_cam"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + /* + * The pinconf can only be referenced once so we put it on the + * first regulator and comment it out here. + * + * pinctrl-names = "default"; + * pinctrl-0 = <&wf_cam_en>; + */ + + vin-supply = <&pp1800_l19b>; + }; + + pp1200_wf_cam: pp1200-wf-cam { + compatible = "regulator-fixed"; + regulator-name = "pp1200_wf_cam"; + + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + /* + * The pinconf can only be referenced once so we put it on the + * first regulator and comment it out here. + * + * pinctrl-names = "default"; + * pinctrl-0 = <&wf_cam_en>; + */ + + vin-supply = <&pp1200_l6b>; + }; + + /* BOARD-SPECIFIC TOP LEVEL NODES */ + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&pen_pdct_l>; + + pen_insert: pen-insert { + label = "Pen Insert"; + + /* Insert = low, eject = high */ + gpios = <&tlmm 39 GPIO_ACTIVE_LOW>; + linux,code = <SW_PEN_INSERTED>; + linux,input-type = <EV_SW>; + wakeup-event-action = <EV_ACT_DEASSERTED>; + wakeup-source; + }; + }; + + pwmleds { + compatible = "pwm-leds"; + status = "disabled"; + keyboard_backlight: keyboard-backlight { + status = "disabled"; + label = "cros_ec::kbd_backlight"; + pwms = <&cros_ec_pwm 0>; + max-brightness = <1023>; + }; + }; +}; + +&apps_rsc { + pm7325-regulators { + compatible = "qcom,pm7325-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd19_pmu_pcie_i: + vdd19_pmu_rfa_i: + vreg_s1b_wlan: + vreg_s1b: smps1 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2040000>; + }; + + vdd_pmu_aon_i: + vreg_s7b_wlan: + vreg_s7b: smps7 { + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + }; + + vdd13_pmu_pcie_i: + vdd13_pmu_rfa_i: + vreg_s8b_wlan: + vreg_s8b: smps8 { + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1500000>; + }; + + vdda_usb_ss_dp_core: + vreg_l1b: ldo1 { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <925000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_usb_hs0_3p1: + vreg_l2b: ldo2 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp1200_l6b: + vdd_ufs_1p2: + vdd_vref: + vdda_csi01_1p2: + vdda_csi23_1p2: + vdda_csi4_1p2: + vdda_dsi0_1p2: + vdda_pcie0_1p2: + vdda_pcie1_1p2: + vdda_usb_ss_dp_1p2: + vdda_qlink0_1p2_ck: + vdda_qlink1_1p2_ck: + vreg_l6b_1p2: + vreg_l6b: ldo6 { + regulator-min-microvolt = <1120000>; + regulator-max-microvolt = <1408000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp2950_l7b: + vreg_l7b: ldo7 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + codec_vcc: + pp1800_l18b_s0: + pp1800_ts: + vdd1: + vddpx_0: + vddpx_3: + vddpx_7: + vreg_l18b: ldo18 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp1800_l19b: + vddpx_ts: + vddpx_wl4otp: + vreg_l19b: ldo19 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8350c-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_s1c: smps1 { + regulator-min-microvolt = <2190000>; + regulator-max-microvolt = <2210000>; + }; + + vddpx_1: + vreg_s9c: smps9 { + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + }; + + pp1800_l1c: + pp1800_pen: + vdd_a_gfx_cs_1p1: + vdd_a_cxo_1p8: + vdd_qfprom: + vdda_apc_cs_1p8: + vdda_qrefs_1p8: + vdda_turing_q6_cs_1p8: + vdda_usb_hs0_1p8: + vreg_l1c: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + dmic_vdd: + pp1800_alc5682: + pp1800_l2c: + pp1800_vreg_alc5682: + vreg_l2c: ldo2 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp3300_sar: + pp3300_sensor: + vreg_l3c: ldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3540000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ppvar_uim1: + vddpx_5: + vreg_l4c: ldo4 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp2950_l5c: + uim_vcc: + vddpx_6: + vreg_l5c: ldo5 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ppvar_l6c: + vddpx_2: + vreg_l6c: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c: ldo7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp1800_prox: + pp1800_sar: + vreg_l8c: ldo8 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp2950_l9c: + vreg_l9c: ldo9 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_a_gnss_0p9: + vdd_ufs_core: + vdd_usb_hs0_core: + vdd_vref_0p9: + vdda_csi01_0p9: + vdda_csi23_0p9: + vdda_csi4_0p9: + vdda_dsi0_pll_0p9: + vdda_dsi0_0p9: + vdda_pcie0_core: + vdda_pcie1_core: + vdda_qlink0_0p9: + vdda_qlink1_0p9: + vdda_qlink0_0p9_ck: + vdda_qlink1_0p9_ck: + vdda_qrefs_0p875: + vreg_l10c_0p8: + vreg_l10c: ldo10 { + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1050000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp2800_l11c: + vreg_l11c: ldo11 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp1800_l12c: + vreg_l12c: ldo12 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp3300_l13c: + vreg_l13c: ldo13 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + }; +}; + +ap_tp_i2c: &i2c1 { + status = "okay"; + clock-frequency = <400000>; + + trackpad: trackpad@15 { + compatible = "elan,ekth3000"; + reg = <0x15>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <102 IRQ_TYPE_EDGE_FALLING>; + + vcc-supply = <&pp3300_z1>; + + wakeup-source; + }; +}; + +ap_h1_i2c: &i2c12 { + status = "okay"; + clock-frequency = <400000>; + + tpm@50 { + compatible = "google,cr50"; + reg = <0x50>; + + pinctrl-names = "default"; + pinctrl-0 = <&h1_ap_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <54 IRQ_TYPE_EDGE_RISING>; + }; +}; + +ap_ts_pen: &i2c13 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <81 IRQ_TYPE_LEVEL_LOW>; + + post-power-on-delay-ms = <20>; + hid-descr-addr = <0x0001>; + + vdd-supply = <&pp3300_ts>; + }; +}; + +&pm7325_gpios { + status = "disabled"; /* No GPIOs are connected */ +}; + +&pmk8350_gpios { + status = "disabled"; /* No GPIOs are connected */ +}; + +&pmk8350_pon { + status = "disabled"; +}; + +&pmk8350_rtc { + status = "disabled"; +}; + +&pmk8350_vadc { + pmk8350_die_temp { + reg = <PMK8350_ADC7_DIE_TEMP>; + label = "pmk8350_die_temp"; + qcom,pre-scaling = <1 1>; + }; + + pmr735a_die_temp { + reg = <PMR735A_ADC7_DIE_TEMP>; + label = "pmr735a_die_temp"; + qcom,pre-scaling = <1 1>; + }; +}; + +&qfprom { + vcc-supply = <&vdd_qfprom>; +}; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + + spi-max-frequency = <37500000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; + vmmc-supply = <&pp2950_l7b>; + vqmmc-supply = <&pp1800_l19b>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; + vmmc-supply = <&pp2950_l9c>; + vqmmc-supply = <&ppvar_l6c>; + + cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; +}; + +ap_ec_spi: &spi8 { + status = "okay"; + + pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs_gpio_init_high>, <&qup_spi8_cs_gpio>; + cs-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + + cros_ec: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + interrupt-parent = <&tlmm>; + interrupts = <142 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ap_ec_int_l>; + spi-max-frequency = <3000000>; + + cros_ec_pwm: ec-pwm { + compatible = "google,cros-ec-pwm"; + #pwm-cells = <1>; + }; + + i2c_tunnel: i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + typec { + compatible = "google,cros-ec-typec"; + #address-cells = <1>; + #size-cells = <0>; + + usb_c0: connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + label = "left"; + power-role = "dual"; + data-role = "host"; + try-power-role = "source"; + }; + + usb_c1: connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + label = "right"; + power-role = "dual"; + data-role = "host"; + try-power-role = "source"; + }; + }; + }; +}; + +#include <arm/cros-ec-keyboard.dtsi> +#include <arm/cros-ec-sbs.dtsi> + +&keyboard_controller { + function-row-physmap = < + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + >; + linux,keymap = < + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_REFRESH) + MATRIX_KEY(0x02, 0x02, KEY_ZOOM) + MATRIX_KEY(0x01, 0x02, KEY_SCALE) + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x02, 0x09, KEY_MUTE) + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) + + CROS_STD_MAIN_KEYMAP + >; +}; + +&uart5 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&uart7 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vdd_usb_hs0_core>; + vdda33-supply = <&vdda_usb_hs0_3p1>; + vdda18-supply = <&vdda_usb_hs0_1p8>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb_ss_dp_1p2>; + vdda-pll-supply = <&vdda_usb_ss_dp_core>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdda-pll-supply = <&vdd_usb_hs0_core>; + vdda33-supply = <&vdda_usb_hs0_3p1>; + vdda18-supply = <&vdda_usb_hs0_1p8>; +}; + +/* PINCTRL - additions to nodes defined in sc7280.dtsi */ + +&qspi_cs0 { + bias-disable; +}; + +&qspi_clk { + bias-disable; +}; + +&qspi_data01 { + /* High-Z when no transfers; nice to park the lines */ + bias-pull-up; +}; + +&qup_uart5_rx { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_uart5_tx { + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_cts { + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + bias-pull-down; +}; + +&qup_uart7_rts { + /* We'll drive RTS, so no pull */ + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_tx { + /* We'll drive TX, so no pull */ + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + bias-pull-up; +}; + +&sdc1_on { + clk { + bias-disable; + drive-strength = <16>; + }; + + cmd { + bias-pull-up; + drive-strength = <10>; + }; + + data { + bias-pull-up; + drive-strength = <10>; + }; + + rclk { + bias-pull-down; + }; +}; + +&sdc2_on { + clk { + bias-disable; + drive-strength = <16>; + }; + + cmd { + bias-pull-up; + drive-strength = <10>; + }; + + data { + bias-pull-up; + drive-strength = <10>; + }; + + sd-cd { + pins = "gpio91"; + bias-pull-up; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&pm8350c_gpios { + gpio-line-names = "AP_SUSPEND", + "", + "", + "AP_BL_EN", + "", + "SD_CD_ODL", + "", + "", + "AP_BL_PWM"; + + ap_bl_en: ap-bl-en { + pins = "gpio4"; + function = "normal"; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + bias-disable; + + /* Force backlight to be disabled to match state at boot. */ + output-low; + }; +}; + +&tlmm { + gpio-line-names = "HP_I2C_SDA", /* 0 */ + "HP_I2C_SCL", + "SSD_RST_L", + "PE_WAKE_ODL", + "AP_TP_I2C_SDA", + "AP_TP_I2C_SCL", + "UF_CAM_EN", + "WF_CAM_EN", + "AP_SAR_SENSOR_SDA", + "AP_SAR_SENSOR_SCL", + + "", /* 10 */ + "", + "AP_SPI_MOSI", + "AP_SPI_MISO", + "AP_SPI_CLK", + "AP_SPI_CS0_L", + "", + "", + "EDP_HPD", + "", + + "UF_CAM_RST_L", /* 20 */ + "WF_CAM_RST_L", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "EN_PP3300_HUB", + "", + "HOST2WLAN_SOL", + "WLAN2HOST_SOL", + "BT_UART_CTS", + "BT_UART_RTS", + + "BT_UART_TXD", /* 30 */ + "BT_UART_RXD", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "", + "", + "", + "PEN_PDCT_L", + + "IO_BRD_ID0", /* 40 */ + "IO_BRD_ID1", + "EN_FP_RAILS", + "PEN_IRQ_L", + "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + + "AP_H1_SPI_CLK", /* 50 */ + "AP_H1_SPI_CS_L", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "H1_AP_INT_ODL", + "", + "LCM_RST_1V8_L", + "AMP_EN", + "", + "DP_HOT_PLUG_DET", + + "HUB_RST_L", /* 60 */ + "FP_TO_AP_IRQ_L", + "", + "", + "UF_CAM_MCLK", + "WF_CAM_MCLK", + "IO_BRD_ID2", + "EN_PP3300_CODEC", + "EC_IN_RW_ODL", + "UF_CAM_SDA", + + "UF_CAM_SCL", /* 70 */ + "WF_CAM_SDA", + "WF_CAM_SCL", + "AP_BRD_ID0", + "AP_BRD_ID1", + "AP_BRD_ID2", + "", + "FPMCU_BOOT0", + "FP_RST_L", + "PE_CLKREQ_ODL", + + "EN_EDP_PP3300", /* 80 */ + "TS_INT_L", + "FORCE_USB_BOOT", + "WCD_RST_L", + "WLAN_EN", + "BT_EN", + "WLAN_SW_CTRL", + "PCIE0_RESET_L", + "PCIE0_CLK_REQ_L", + "PCIE0_WAKE_L", + + "AS_EN", /* 90 */ + "SD_CD_ODL", + "", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "BT_WLAN_SB_CLK", + "BT_WLAN_SB_DATA", + "HP_MCLK", + "HP_BCLK", + "HP_DOUT", + "HP_DIN", + + "HP_LRCLK", /* 100 */ + "HP_IRQ", + "TP_INT_ODL", + "", + "IO_SKU_ID2", + "TS_RESET_L", + "AMP_BCLK", + "AMP_DIN", + "AMP_LRCLK", + "UIM2_DATA", + + "UIM2_CLK", /* 110 */ + "UIM2_RST", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "RFFE0_CLK", + "RFFE0_DATA/BOOT_CONFIG_0", + "RFFE1_CLK", + + "RFFE1_DATA/BOOT_CONFIG_1", /* 120 */ + "RFFE2_CLK", + "RFFE2_DATA/BOOT_CONFIG_2", + "RFFE3_CLK", + "RFFE3_DATA/BOOT_CONFIG_3", + "RFFE4_CLK", + "RFFE4_DATA", + "WCI2_LTE_COEX_RXD", + "WCI2_LTE_COEX_TXD", + "IO_SKU_ID0", + + "IO_SKU_ID1", /* 130 */ + "", + "", + "QLINK0_REQ", + "QLINK0_EN", + "QLINK0_WMSS_RESET_L", + "QLINK1_REQ", + "QLINK1_EN", + "QLINK1_WMSS_RESET_L", + "FORCED_USB_BOOT_POL", + + "", /* 140 */ + "P_SENSOR_INT_L", + "AP_EC_INT_L", + "", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA_0", + "WCD_SWR_TX_DATA_1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA_0", + "WCD_SWR_RX_DATA_1", + + "", /* 150 */ + "", + "", + "", + "", + "", + "", + "", + "WCD_SWR_TX_DATA_2", + "", + + "", /* 160 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + + "", /* 170 */ + "SENS_UART_TXD", + "SENS_UART_RXD", + "", + "", + ""; + + /* + * pinctrl settings for pins that have no real owners. + */ + pinctrl-names = "default"; + pinctrl-0 = <&bios_flash_wp_l>; + + amp_en: amp-en { + pins = "gpio57"; + function = "gpio"; + bias-pull-down; + }; + + ap_ec_int_l: ap-ec-int-l { + pins = "gpio142"; + input-enable; + bias-pull-up; + }; + + bios_flash_wp_l: bios-flash-wp-l { + pins = "gpio93"; + function = "gpio"; + input-enable; + bias-disable; + }; + + bt_en: bt-en { + pins = "gpio85"; + function = "gpio"; + drive-strength = <2>; + output-low; + bias-pull-down; + }; + + en_fp_rails: en-fp-rails { + pins = "gpio42"; + drive-strength = <2>; + output-high; + bias-disable; + }; + + en_pp3300_codec: en-pp3300-codec { + pins = "gpio67"; + drive-strength = <2>; + bias-disable; + }; + + en_pp3300_dx_edp: en-pp3300-dx-edp { + pins = "gpio80"; + function = "gpio"; + drive-strength = <2>; + /* Has external pulldown */ + bias-disable; + }; + + en_pp3300_hub: en-pp3300-hub { + pins = "gpio24"; + function = "gpio"; + drive-strength = <2>; + /* Has external pulldown */ + bias-disable; + }; + + fp_to_ap_irq_l: fp-to-ap-irq-l { + pins = "gpio61"; + function = "gpio"; + input-enable; + /* Has external pullup */ + bias-disable; + }; + + h1_ap_int_odl: h1-ap-int-odl { + pins = "gpio54"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + + hp_irq: hp-irq { + pins = "gpio101"; + function = "gpio"; + bias-pull-up; + }; + + p_sensor_int_l: p-sensor-int-l { + pins = "gpio141"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + + pen_irq_l: pen-irq-l { + pins = "gpio43"; + function = "gpio"; + /* Has external pullup */ + bias-disable; + }; + + pen_pdct_l: pen-pdct-l { + pins = "gpio39"; + function = "gpio"; + /* Has external pullup */ + bias-disable; + }; + + qup_spi8_cs_gpio_init_high: qup-spi8-cs-gpio-init-high { + pins = "gpio35"; + output-high; + }; + + qup_spi11_cs_gpio_init_high: qup-spi11-cs-gpio-init-high { + pins = "gpio47"; + output-high; + }; + + qup_spi12_cs_gpio_init_high: qup-spi12-cs-gpio-init-high { + pins = "gpio51"; + output-high; + }; + + qup_uart7_sleep_cts: qup-uart7-sleep-cts { + pins = "gpio28"; + function = "gpio"; + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + bias-pull-down; + }; + + qup_uart7_sleep_rts: qup-uart7-sleep-rts { + pins = "gpio29"; + function = "gpio"; + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + bias-pull-down; + }; + + qup_uart7_sleep_rx: qup-uart7-sleep-rx { + pins = "gpio31"; + function = "gpio"; + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + bias-pull-up; + }; + + qup_uart7_sleep_tx: qup-uart7-sleep-tx { + pins = "gpio30"; + function = "gpio"; + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + bias-pull-up; + }; + + tp_int_odl: tp-int-odl { + pins = "gpio102"; + function = "gpio"; + /* Has external pullup */ + bias-disable; + }; + + ts_int_l: ts-int-l { + pins = "gpio81"; + function = "gpio"; + /* Has external pullup */ + bias-pull-up; + }; + + ts_reset_l: ts-reset-l { + pins = "gpio105"; + function = "gpio"; + /* Has external pullup */ + bias-disable; + drive-strength = <2>; + }; + + uf_cam_en: uf-cam-en { + pins = "gpio6"; + function = "gpio"; + drive-strength = <2>; + /* Has external pulldown */ + bias-disable; + }; + + wf_cam_en: wf-cam-en { + pins = "gpio7"; + function = "gpio"; + drive-strength = <2>; + /* Has external pulldown */ + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts index 64fc22aff33d..9b991ba5daaf 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts @@ -61,6 +61,18 @@ modem-init; }; +&pmk8350_rtc { + status = "okay"; +}; + +&nvme_pwren { + pins = "gpio19"; +}; + +&nvme_3v3_regulator { + gpio = <&tlmm 19 GPIO_ACTIVE_HIGH>; +}; + &pmk8350_vadc { pmr735a_die_temp { reg = <PMR735A_ADC7_DIE_TEMP>; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index 371a2a9dcf7a..d623d71d8bd4 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -7,11 +7,96 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> +#include <dt-bindings/input/linux-event-codes.h> #include "sc7280.dtsi" #include "pm7325.dtsi" #include "pm8350c.dtsi" #include "pmk8350.dtsi" +/ { + gpio-keys { + compatible = "gpio-keys"; + label = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&key_vol_up_default>; + + volume-up { + label = "volume_up"; + gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + gpio-key,wakeup; + debounce-interval = <15>; + linux,can-disable; + }; + }; + + nvme_3v3_regulator: nvme-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "VLDO_3V3"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&nvme_pwren>; + }; +}; + +/* + * Reserved memory changes + * + * Delete all unused memory nodes and define the peripheral memory regions + * required by the board dts. + * + */ + +/delete-node/ &hyp_mem; +/delete-node/ &xbl_mem; +/delete-node/ &reserved_xbl_uefi_log; +/delete-node/ &sec_apps_mem; + +/* Increase the size from 2.5MB to 8MB */ +&rmtfs_mem { + reg = <0x0 0x9c900000 0x0 0x800000>; +}; + +/ { + reserved-memory { + adsp_mem: memory@86700000 { + reg = <0x0 0x86700000 0x0 0x2800000>; + no-map; + }; + + camera_mem: memory@8ad00000 { + reg = <0x0 0x8ad00000 0x0 0x500000>; + no-map; + }; + + venus_mem: memory@8b200000 { + reg = <0x0 0x8b200000 0x0 0x500000>; + no-map; + }; + + mpss_mem: memory@8b800000 { + reg = <0x0 0x8b800000 0x0 0xf600000>; + no-map; + }; + + wpss_mem: memory@9ae00000 { + reg = <0x0 0x9ae00000 0x0 0x1900000>; + no-map; + }; + + mba_mem: memory@9c700000 { + reg = <0x0 0x9c700000 0x0 0x200000>; + no-map; + }; + }; +}; + &apps_rsc { pm7325-regulators { compatible = "qcom,pm7325-rpmh-regulators"; @@ -199,6 +284,23 @@ modem-init; }; +&pcie1 { + status = "okay"; + perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&nvme_3v3_regulator>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>; +}; + +&pcie1_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l10c_0p8>; + vdda-pll-supply = <&vreg_l6b_1p2>; +}; + &pmk8350_vadc { pmk8350_die_temp { reg = <PMK8350_ADC7_DIE_TEMP>; @@ -207,10 +309,39 @@ }; }; +&qfprom { + vcc-supply = <&vreg_l1c_1p8>; +}; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <37500000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; +}; + &qupv3_id_0 { status = "okay"; }; +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_mpss { + status = "okay"; + compatible = "qcom,sc7280-mss-pil"; + iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>; + memory-region = <&mba_mem &mpss_mem>; +}; + &sdhc_1 { status = "okay"; @@ -240,6 +371,7 @@ }; &uart5 { + compatible = "qcom,geni-debug-uart"; status = "okay"; }; @@ -282,20 +414,146 @@ vdda18-supply = <&vreg_l1c_1p8>; }; +&uart7 { + status = "okay"; + + /delete-property/interrupts; + interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default", "sleep"; + pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>; +}; + /* PINCTRL - additions to nodes defined in sc7280.dtsi */ -&qup_uart5_default { - tx { - pins = "gpio46"; - drive-strength = <2>; +&pm7325_gpios { + key_vol_up_default: key-vol-up-default { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + power-source = <0>; + qcom,drive-strength = <3>; + }; +}; + +&qspi_cs0 { + bias-disable; +}; + +&qspi_clk { + bias-disable; +}; + +&qspi_data01 { + /* High-Z when no transfers; nice to park the lines */ + bias-pull-up; +}; + +&qup_uart5_tx { + drive-strength = <2>; + bias-disable; +}; + +&qup_uart5_rx { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_uart7_cts { + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + bias-pull-down; +}; + +&qup_uart7_rts { + /* We'll drive RTS, so no pull */ + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_tx { + /* We'll drive TX, so no pull */ + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + bias-pull-up; +}; + +&tlmm { + nvme_pwren: nvme-pwren { + function = "gpio"; + }; + + pcie1_reset_n: pcie1-reset-n { + pins = "gpio2"; + function = "gpio"; + + drive-strength = <16>; + output-low; bias-disable; }; - rx { - pins = "gpio47"; + pcie1_wake_n: pcie1-wake-n { + pins = "gpio3"; + function = "gpio"; + drive-strength = <2>; bias-pull-up; }; + + qup_uart7_sleep_cts: qup-uart7-sleep-cts { + pins = "gpio28"; + function = "gpio"; + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + bias-pull-down; + }; + + qup_uart7_sleep_rts: qup-uart7-sleep-rts { + pins = "gpio29"; + function = "gpio"; + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + bias-pull-down; + }; + + qup_uart7_sleep_tx: qup-uart7-sleep-tx { + pins = "gpio30"; + function = "gpio"; + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + bias-pull-up; + }; + + qup_uart7_sleep_rx: qup-uart7-sleep-rx { + pins = "gpio31"; + function = "gpio"; + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + bias-pull-up; + }; }; &sdc1_on { @@ -336,6 +594,7 @@ }; sd-cd { + pins = "gpio91"; bias-pull-up; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp2.dts b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts index 1fc2addc8ab6..3ae99697d893 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp2.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts @@ -21,3 +21,11 @@ stdout-path = "serial0:115200n8"; }; }; + +&nvme_pwren { + pins = "gpio51"; +}; + +&nvme_3v3_regulator { + gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index fd78f16181dd..365a2e04e285 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -5,12 +5,14 @@ * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. */ +#include <dt-bindings/clock/qcom,dispcc-sc7280.h> #include <dt-bindings/clock/qcom,gcc-sc7280.h> +#include <dt-bindings/clock/qcom,gpucc-sc7280.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,videocc-sc7280.h> #include <dt-bindings/interconnect/qcom,sc7280.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/mailbox/qcom-ipcc.h> -#include <dt-bindings/power/qcom-aoss-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/reset/qcom,sdm845-aoss.h> #include <dt-bindings/reset/qcom,sdm845-pdc.h> @@ -26,8 +28,40 @@ chosen { }; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c12 = &i2c12; + i2c13 = &i2c13; + i2c14 = &i2c14; + i2c15 = &i2c15; mmc1 = &sdhc_1; mmc2 = &sdhc_2; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; + spi3 = &spi3; + spi4 = &spi4; + spi5 = &spi5; + spi6 = &spi6; + spi7 = &spi7; + spi8 = &spi8; + spi9 = &spi9; + spi10 = &spi10; + spi11 = &spi11; + spi12 = &spi12; + spi13 = &spi13; + spi14 = &spi14; + spi15 = &spi15; }; clocks { @@ -49,6 +83,16 @@ #size-cells = <2>; ranges; + hyp_mem: memory@80000000 { + reg = <0x0 0x80000000 0x0 0x600000>; + no-map; + }; + + xbl_mem: memory@80600000 { + reg = <0x0 0x80600000 0x0 0x200000>; + no-map; + }; + aop_mem: memory@80800000 { reg = <0x0 0x80800000 0x0 0x60000>; no-map; @@ -60,6 +104,16 @@ no-map; }; + reserved_xbl_uefi_log: memory@80880000 { + reg = <0x0 0x80884000 0x0 0x10000>; + no-map; + }; + + sec_apps_mem: memory@808ff000 { + reg = <0x0 0x808ff000 0x0 0x1000>; + no-map; + }; + smem_mem: memory@80900000 { reg = <0x0 0x80900000 0x0 0x200000>; no-map; @@ -70,10 +124,24 @@ reg = <0x0 0x80b00000 0x0 0x100000>; }; + wlan_fw_mem: memory@80c00000 { + reg = <0x0 0x80c00000 0x0 0xc00000>; + no-map; + }; + ipa_fw_mem: memory@8b700000 { reg = <0 0x8b700000 0 0x10000>; no-map; }; + + rmtfs_mem: memory@9c900000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x9c900000 0x0 0x280000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; }; cpus { @@ -219,6 +287,42 @@ }; }; + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + idle-states { entry-method = "psci"; @@ -415,6 +519,49 @@ method = "smc"; }; + qspi_opp_table: qspi-opp-table { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + qup_opp_table: qup-opp-table { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-128000000 { + opp-hz = /bits/ 64 <128000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + soc: soc@0 { #address-cells = <2>; #size-cells = <2>; @@ -517,22 +664,857 @@ qupv3_id_0: geniqup@9c0000 { compatible = "qcom,geni-se-qup"; reg = <0 0x009c0000 0 0x2000>; - clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; #address-cells = <2>; #size-cells = <2>; ranges; + iommus = <&apps_smmu 0x123 0x0>; status = "disabled"; - uart5: serial@994000 { - compatible = "qcom,geni-debug-uart"; + i2c0: i2c@980000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00980000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_data_clk>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi0: spi@980000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00980000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart0: serial@980000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00980000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart0_cts>, <&qup_uart0_rts>, <&qup_uart0_tx>, <&qup_uart0_rx>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c1: i2c@984000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00984000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_data_clk>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi1: spi@984000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00984000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart1: serial@984000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00984000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart1_cts>, <&qup_uart1_rts>, <&qup_uart1_tx>, <&qup_uart1_rx>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c2: i2c@988000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00988000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_data_clk>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi2: spi@988000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00988000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart2: serial@988000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00988000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart2_cts>, <&qup_uart2_rts>, <&qup_uart2_tx>, <&qup_uart2_rx>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c3: i2c@98c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0098c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c3_data_clk>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi3: spi@98c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0098c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart3: serial@98c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x0098c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart3_cts>, <&qup_uart3_rts>, <&qup_uart3_tx>, <&qup_uart3_rx>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c4: i2c@990000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00990000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_data_clk>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi4: spi@990000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00990000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart4: serial@990000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00990000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart4_cts>, <&qup_uart4_rts>, <&qup_uart4_tx>, <&qup_uart4_rx>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c5: i2c@994000 { + compatible = "qcom,geni-i2c"; reg = <0 0x00994000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_data_clk>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi5: spi@994000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00994000 0 0x4000>; clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; pinctrl-names = "default"; - pinctrl-0 = <&qup_uart5_default>; + pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart5: serial@994000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00994000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart5_cts>, <&qup_uart5_rts>, <&qup_uart5_tx>, <&qup_uart5_rx>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c6: i2c@998000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00998000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_data_clk>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi6: spi@998000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00998000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart6: serial@998000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00998000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart6_cts>, <&qup_uart6_rts>, <&qup_uart6_tx>, <&qup_uart6_rx>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c7: i2c@99c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0099c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c7_data_clk>; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi7: spi@99c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0099c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart7: serial@99c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x0099c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart7_cts>, <&qup_uart7_rts>, <&qup_uart7_tx>, <&qup_uart7_rx>; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x00ac0000 0 0x2000>; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + iommus = <&apps_smmu 0x43 0x0>; + status = "disabled"; + + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_data_clk>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart8: serial@a80000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart8_cts>, <&qup_uart8_rts>, <&qup_uart8_tx>, <&qup_uart8_rx>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c9_data_clk>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart9: serial@a84000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart9_cts>, <&qup_uart9_rts>, <&qup_uart9_tx>, <&qup_uart9_rx>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_data_clk>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart10: serial@a88000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart10_cts>, <&qup_uart10_rts>, <&qup_uart10_tx>, <&qup_uart10_rx>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c11_data_clk>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart11: serial@a8c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart11_cts>, <&qup_uart11_rts>, <&qup_uart11_tx>, <&qup_uart11_rx>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c12_data_clk>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart12: serial@a90000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart12_cts>, <&qup_uart12_rts>, <&qup_uart12_tx>, <&qup_uart12_rx>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c13_data_clk>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi13: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart13: serial@a94000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart13_cts>, <&qup_uart13_rts>, <&qup_uart13_tx>, <&qup_uart13_rx>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c14: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a98000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c14_data_clk>; + interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi14: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a98000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>; + interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart14: serial@a98000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a98000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart14_cts>, <&qup_uart14_rts>, <&qup_uart14_tx>, <&qup_uart14_rx>; + interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c15: i2c@a9c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a9c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c15_data_clk>; + interrupts = <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi15: spi@a9c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a9c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>; + interrupts = <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart15: serial@a9c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a9c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart15_cts>, <&qup_uart15_rts>, <&qup_uart15_tx>, <&qup_uart15_rx>; + interrupts = <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; }; @@ -586,6 +1568,117 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + pcie1: pci@1c08000 { + compatible = "qcom,pcie-sc7280"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK_SRC>, + <&pcie1_lane 0>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_CLK>; + + clock-names = "pipe", + "pipe_mux", + "phy_pipe", + "ref", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu", + "ddrss_sf_tbu"; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + power-domains = <&gcc GCC_PCIE_1_GDSC>; + + phys = <&pcie1_lane>; + phy-names = "pciephy"; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_clkreq_n>; + + iommus = <&apps_smmu 0x1c80 0x1>; + + iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, + <0x100 &apps_smmu 0x1c81 0x1>; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0e000 { + compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy"; + reg = <0 0x01c0e000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_CLKREF_EN>, + <&gcc GCC_PCIE1_PHY_RCHNG_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE1_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie1_lane: lanes@1c0e200 { + reg = <0 0x01c0e200 0 0x170>, + <0 0x01c0e400 0 0x200>, + <0 0x01c0ea00 0 0x1f0>, + <0 0x01c0e600 0 0x170>, + <0 0x01c0e800 0 0x200>, + <0 0x01c0ee00 0 0xf4>; + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "pipe0"; + + #phy-cells = <0>; + #clock-cells = <1>; + clock-output-names = "pcie_1_pipe_clk"; + }; + }; + ipa: ipa@1e40000 { compatible = "qcom,sc7280-ipa"; @@ -598,8 +1691,8 @@ "ipa-shared", "gsi"; - interrupts-extended = <&intc 0 654 IRQ_TYPE_EDGE_RISING>, - <&intc 0 432 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; interrupt-names = "ipa", @@ -629,6 +1722,11 @@ #hwlock-cells = <1>; }; + tcsr: syscon@1fc0000 { + compatible = "qcom,sc7280-tcsr", "syscon"; + reg = <0 0x01fc0000 0 0x30000>; + }; + lpasscc: lpasscc@3000000 { compatible = "qcom,sc7280-lpasscc"; reg = <0 0x03000000 0 0x40>, @@ -647,6 +1745,86 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + gpu: gpu@3d00000 { + compatible = "qcom,adreno-635.0", "qcom,adreno"; + #stream-id-cells = <16>; + reg = <0 0x03d00000 0 0x40000>, + <0 0x03d9e000 0 0x1000>, + <0 0x03d61000 0 0x800>; + reg-names = "kgsl_3d0_reg_memory", + "cx_mem", + "cx_dbgc"; + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&adreno_smmu 0 0x401>; + operating-points-v2 = <&gpu_opp_table>; + qcom,gmu = <&gmu>; + interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "gfx-mem"; + #cooling-cells = <2>; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-315000000 { + opp-hz = /bits/ 64 <315000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + opp-peak-kBps = <1804000>; + }; + + opp-450000000 { + opp-hz = /bits/ 64 <450000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + opp-peak-kBps = <4068000>; + }; + + opp-550000000 { + opp-hz = /bits/ 64 <550000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + opp-peak-kBps = <6832000>; + }; + }; + }; + + gmu: gmu@3d69000 { + compatible="qcom,adreno-gmu-635.0", "qcom,adreno-gmu"; + reg = <0 0x03d6a000 0 0x34000>, + <0 0x3de0000 0 0x10000>, + <0 0x0b290000 0 0x10000>; + reg-names = "gmu", "rscc", "gmu_pdc"; + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + clocks = <&gpucc 5>, + <&gpucc 8>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc 2>, + <&gpucc 15>, + <&gpucc 11>; + clock-names = "gmu", + "cxo", + "axi", + "memnoc", + "ahb", + "hub", + "smmu_vote"; + power-domains = <&gpucc 0>, + <&gpucc 1>; + power-domain-names = "cx", + "gx"; + iommus = <&adreno_smmu 5 0x400>; + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + }; + }; + gpucc: clock-controller@3d90000 { compatible = "qcom,sc7280-gpucc"; reg = <0 0x03d90000 0 0x9000>; @@ -661,6 +1839,95 @@ #power-domain-cells = <1>; }; + adreno_smmu: iommu@3da0000 { + compatible = "qcom,sc7280-smmu-500", "qcom,adreno-smmu", "arm,mmu-500"; + reg = <0 0x03da0000 0 0x20000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 675 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, + <&gpucc 2>, + <&gpucc 11>, + <&gpucc 5>, + <&gpucc 15>, + <&gpucc 13>; + clock-names = "gcc_gpu_memnoc_gfx_clk", + "gcc_gpu_snoc_dvm_gfx_clk", + "gpu_cc_ahb_clk", + "gpu_cc_hlos1_vote_gpu_smmu_clk", + "gpu_cc_cx_gmu_clk", + "gpu_cc_hub_cx_int_clk", + "gpu_cc_hub_aon_clk"; + + power-domains = <&gpucc 0>; + }; + + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sc7280-mpss-pas"; + reg = <0 0x04080000 0 0x10000>, <0 0x04180000 0 0x48>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_OFFLINE_AXI_CLK>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&rpmhcc RPMH_PKA_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "offline", "snoc_axi", "pka", "xo"; + + power-domains = <&rpmhpd SC7280_CX>, + <&rpmhpd SC7280_MSS>; + power-domain-names = "cx", "mss"; + + memory-region = <&mpss_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&aoss_reset AOSS_CC_MSS_RESTART>, + <&pdc_reset PDC_MODEM_SYNC_RESET>; + reset-names = "mss_restart", "pdc_reset"; + + qcom,halt-regs = <&tcsr_mutex 0x23000 0x25000 0x28000 0x33000>; + qcom,ext-regs = <&tcsr 0x10000 0x10004 &tcsr_mutex 0x26004 0x26008>; + qcom,qaccept-regs = <&tcsr_mutex 0x23030 0x23040 0x23020>; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + label = "modem"; + qcom,remote-pid = <1>; + }; + }; + stm@6002000 { compatible = "arm,coresight-stm", "arm,primecell"; reg = <0 0x06002000 0 0x1000>, @@ -1258,15 +2525,11 @@ dp_phy: dp-phy@88ea200 { reg = <0 0x088ea200 0 0x200>, <0 0x088ea400 0 0x200>, - <0 0x088eac00 0 0x400>, + <0 0x088eaa00 0 0x200>, <0 0x088ea600 0 0x200>, - <0 0x088ea800 0 0x200>, - <0 0x088eaa00 0 0x100>; + <0 0x088ea800 0 0x200>; #phy-cells = <0>; #clock-cells = <1>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; }; }; @@ -1318,6 +2581,23 @@ }; }; + qspi: spi@88dc000 { + compatible = "qcom,sc7280-qspi", "qcom,qspi-v1"; + reg = <0 0x088dc000 0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <&gcc GCC_QSPI_CORE_CLK>; + clock-names = "iface", "core"; + interconnects = <&gem_noc MASTER_APPSS_PROC 0 + &cnoc2 SLAVE_QSPI_0 0>; + interconnect-names = "qspi-config"; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qspi_opp_table>; + status = "disabled"; + }; + dc_noc: interconnect@90e0000 { reg = <0 0x090e0000 0 0x5080>; compatible = "qcom,sc7280-dc-noc"; @@ -1473,7 +2753,7 @@ aoss_qmp: power-controller@c300000 { compatible = "qcom,sc7280-aoss-qmp"; - reg = <0 0x0c300000 0 0x100000>; + reg = <0 0x0c300000 0 0x400>; interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>; @@ -1481,7 +2761,11 @@ IPCC_MPROC_SIGNAL_GLINK_QMP>; #clock-cells = <0>; - #power-domain-cells = <1>; + }; + + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; }; spmi_bus: spmi@c440000 { @@ -1513,11 +2797,518 @@ gpio-ranges = <&tlmm 0 0 175>; wakeup-parent = <&pdc>; - qup_uart5_default: qup-uart5-default { - pins = "gpio46", "gpio47"; + pcie1_clkreq_n: pcie1-clkreq-n { + pins = "gpio79"; + function = "pcie1_clkreqn"; + drive-strength = <2>; + bias-pull-up; + }; + + qspi_clk: qspi-clk { + pins = "gpio14"; + function = "qspi_clk"; + }; + + qspi_cs0: qspi-cs0 { + pins = "gpio15"; + function = "qspi_cs"; + }; + + qspi_cs1: qspi-cs1 { + pins = "gpio19"; + function = "qspi_cs"; + }; + + qspi_data01: qspi-data01 { + pins = "gpio12", "gpio13"; + function = "qspi_data"; + }; + + qspi_data12: qspi-data12 { + pins = "gpio16", "gpio17"; + function = "qspi_data"; + }; + + qup_i2c0_data_clk: qup-i2c0-data-clk { + pins = "gpio0", "gpio1"; + function = "qup00"; + }; + + qup_i2c1_data_clk: qup-i2c1-data-clk { + pins = "gpio4", "gpio5"; + function = "qup01"; + }; + + qup_i2c2_data_clk: qup-i2c2-data-clk { + pins = "gpio8", "gpio9"; + function = "qup02"; + }; + + qup_i2c3_data_clk: qup-i2c3-data-clk { + pins = "gpio12", "gpio13"; + function = "qup03"; + }; + + qup_i2c4_data_clk: qup-i2c4-data-clk { + pins = "gpio16", "gpio17"; + function = "qup04"; + }; + + qup_i2c5_data_clk: qup-i2c5-data-clk { + pins = "gpio20", "gpio21"; + function = "qup05"; + }; + + qup_i2c6_data_clk: qup-i2c6-data-clk { + pins = "gpio24", "gpio25"; + function = "qup06"; + }; + + qup_i2c7_data_clk: qup-i2c7-data-clk { + pins = "gpio28", "gpio29"; + function = "qup07"; + }; + + qup_i2c8_data_clk: qup-i2c8-data-clk { + pins = "gpio32", "gpio33"; + function = "qup10"; + }; + + qup_i2c9_data_clk: qup-i2c9-data-clk { + pins = "gpio36", "gpio37"; + function = "qup11"; + }; + + qup_i2c10_data_clk: qup-i2c10-data-clk { + pins = "gpio40", "gpio41"; + function = "qup12"; + }; + + qup_i2c11_data_clk: qup-i2c11-data-clk { + pins = "gpio44", "gpio45"; + function = "qup13"; + }; + + qup_i2c12_data_clk: qup-i2c12-data-clk { + pins = "gpio48", "gpio49"; + function = "qup14"; + }; + + qup_i2c13_data_clk: qup-i2c13-data-clk { + pins = "gpio52", "gpio53"; + function = "qup15"; + }; + + qup_i2c14_data_clk: qup-i2c14-data-clk { + pins = "gpio56", "gpio57"; + function = "qup16"; + }; + + qup_i2c15_data_clk: qup-i2c15-data-clk { + pins = "gpio60", "gpio61"; + function = "qup17"; + }; + + qup_spi0_data_clk: qup-spi0-data-clk { + pins = "gpio0", "gpio1", "gpio2"; + function = "qup00"; + }; + + qup_spi0_cs: qup-spi0-cs { + pins = "gpio3"; + function = "qup00"; + }; + + qup_spi0_cs_gpio: qup-spi0-cs-gpio { + pins = "gpio3"; + function = "gpio"; + }; + + qup_spi1_data_clk: qup-spi1-data-clk { + pins = "gpio4", "gpio5", "gpio6"; + function = "qup01"; + }; + + qup_spi1_cs: qup-spi1-cs { + pins = "gpio7"; + function = "qup01"; + }; + + qup_spi1_cs_gpio: qup-spi1-cs-gpio { + pins = "gpio7"; + function = "gpio"; + }; + + qup_spi2_data_clk: qup-spi2-data-clk { + pins = "gpio8", "gpio9", "gpio10"; + function = "qup02"; + }; + + qup_spi2_cs: qup-spi2-cs { + pins = "gpio11"; + function = "qup02"; + }; + + qup_spi2_cs_gpio: qup-spi2-cs-gpio { + pins = "gpio11"; + function = "gpio"; + }; + + qup_spi3_data_clk: qup-spi3-data-clk { + pins = "gpio12", "gpio13", "gpio14"; + function = "qup03"; + }; + + qup_spi3_cs: qup-spi3-cs { + pins = "gpio15"; + function = "qup03"; + }; + + qup_spi3_cs_gpio: qup-spi3-cs-gpio { + pins = "gpio15"; + function = "gpio"; + }; + + qup_spi4_data_clk: qup-spi4-data-clk { + pins = "gpio16", "gpio17", "gpio18"; + function = "qup04"; + }; + + qup_spi4_cs: qup-spi4-cs { + pins = "gpio19"; + function = "qup04"; + }; + + qup_spi4_cs_gpio: qup-spi4-cs-gpio { + pins = "gpio19"; + function = "gpio"; + }; + + qup_spi5_data_clk: qup-spi5-data-clk { + pins = "gpio20", "gpio21", "gpio22"; + function = "qup05"; + }; + + qup_spi5_cs: qup-spi5-cs { + pins = "gpio23"; + function = "qup05"; + }; + + qup_spi5_cs_gpio: qup-spi5-cs-gpio { + pins = "gpio23"; + function = "gpio"; + }; + + qup_spi6_data_clk: qup-spi6-data-clk { + pins = "gpio24", "gpio25", "gpio26"; + function = "qup06"; + }; + + qup_spi6_cs: qup-spi6-cs { + pins = "gpio27"; + function = "qup06"; + }; + + qup_spi6_cs_gpio: qup-spi6-cs-gpio { + pins = "gpio27"; + function = "gpio"; + }; + + qup_spi7_data_clk: qup-spi7-data-clk { + pins = "gpio28", "gpio29", "gpio30"; + function = "qup07"; + }; + + qup_spi7_cs: qup-spi7-cs { + pins = "gpio31"; + function = "qup07"; + }; + + qup_spi7_cs_gpio: qup-spi7-cs-gpio { + pins = "gpio31"; + function = "gpio"; + }; + + qup_spi8_data_clk: qup-spi8-data-clk { + pins = "gpio32", "gpio33", "gpio34"; + function = "qup10"; + }; + + qup_spi8_cs: qup-spi8-cs { + pins = "gpio35"; + function = "qup10"; + }; + + qup_spi8_cs_gpio: qup-spi8-cs-gpio { + pins = "gpio35"; + function = "gpio"; + }; + + qup_spi9_data_clk: qup-spi9-data-clk { + pins = "gpio36", "gpio37", "gpio38"; + function = "qup11"; + }; + + qup_spi9_cs: qup-spi9-cs { + pins = "gpio39"; + function = "qup11"; + }; + + qup_spi9_cs_gpio: qup-spi9-cs-gpio { + pins = "gpio39"; + function = "gpio"; + }; + + qup_spi10_data_clk: qup-spi10-data-clk { + pins = "gpio40", "gpio41", "gpio42"; + function = "qup12"; + }; + + qup_spi10_cs: qup-spi10-cs { + pins = "gpio43"; + function = "qup12"; + }; + + qup_spi10_cs_gpio: qup-spi10-cs-gpio { + pins = "gpio43"; + function = "gpio"; + }; + + qup_spi11_data_clk: qup-spi11-data-clk { + pins = "gpio44", "gpio45", "gpio46"; function = "qup13"; }; + qup_spi11_cs: qup-spi11-cs { + pins = "gpio47"; + function = "qup13"; + }; + + qup_spi11_cs_gpio: qup-spi11-cs-gpio { + pins = "gpio47"; + function = "gpio"; + }; + + qup_spi12_data_clk: qup-spi12-data-clk { + pins = "gpio48", "gpio49", "gpio50"; + function = "qup14"; + }; + + qup_spi12_cs: qup-spi12-cs { + pins = "gpio51"; + function = "qup14"; + }; + + qup_spi12_cs_gpio: qup-spi12-cs-gpio { + pins = "gpio51"; + function = "gpio"; + }; + + qup_spi13_data_clk: qup-spi13-data-clk { + pins = "gpio52", "gpio53", "gpio54"; + function = "qup15"; + }; + + qup_spi13_cs: qup-spi13-cs { + pins = "gpio55"; + function = "qup15"; + }; + + qup_spi13_cs_gpio: qup-spi13-cs-gpio { + pins = "gpio55"; + function = "gpio"; + }; + + qup_spi14_data_clk: qup-spi14-data-clk { + pins = "gpio56", "gpio57", "gpio58"; + function = "qup16"; + }; + + qup_spi14_cs: qup-spi14-cs { + pins = "gpio59"; + function = "qup16"; + }; + + qup_spi14_cs_gpio: qup-spi14-cs-gpio { + pins = "gpio59"; + function = "gpio"; + }; + + qup_spi15_data_clk: qup-spi15-data-clk { + pins = "gpio60", "gpio61", "gpio62"; + function = "qup17"; + }; + + qup_spi15_cs: qup-spi15-cs { + pins = "gpio63"; + function = "qup17"; + }; + + qup_spi15_cs_gpio: qup-spi15-cs-gpio { + pins = "gpio63"; + function = "gpio"; + }; + + qup_uart0_cts: qup-uart0-cts { + pins = "gpio0"; + function = "qup00"; + }; + + qup_uart0_rts: qup-uart0-rts { + pins = "gpio1"; + function = "qup00"; + }; + + qup_uart0_tx: qup-uart0-tx { + pins = "gpio2"; + function = "qup00"; + }; + + qup_uart0_rx: qup-uart0-rx { + pins = "gpio3"; + function = "qup00"; + }; + + qup_uart1_cts: qup-uart1-cts { + pins = "gpio4"; + function = "qup01"; + }; + + qup_uart1_rts: qup-uart1-rts { + pins = "gpio5"; + function = "qup01"; + }; + + qup_uart1_tx: qup-uart1-tx { + pins = "gpio6"; + function = "qup01"; + }; + + qup_uart1_rx: qup-uart1-rx { + pins = "gpio7"; + function = "qup01"; + }; + + qup_uart2_cts: qup-uart2-cts { + pins = "gpio8"; + function = "qup02"; + }; + + qup_uart2_rts: qup-uart2-rts { + pins = "gpio9"; + function = "qup02"; + }; + + qup_uart2_tx: qup-uart2-tx { + pins = "gpio10"; + function = "qup02"; + }; + + qup_uart2_rx: qup-uart2-rx { + pins = "gpio11"; + function = "qup02"; + }; + + qup_uart3_cts: qup-uart3-cts { + pins = "gpio12"; + function = "qup03"; + }; + + qup_uart3_rts: qup-uart3-rts { + pins = "gpio13"; + function = "qup03"; + }; + + qup_uart3_tx: qup-uart3-tx { + pins = "gpio14"; + function = "qup03"; + }; + + qup_uart3_rx: qup-uart3-rx { + pins = "gpio15"; + function = "qup03"; + }; + + qup_uart4_cts: qup-uart4-cts { + pins = "gpio16"; + function = "qup04"; + }; + + qup_uart4_rts: qup-uart4-rts { + pins = "gpio17"; + function = "qup04"; + }; + + qup_uart4_tx: qup-uart4-tx { + pins = "gpio18"; + function = "qup04"; + }; + + qup_uart4_rx: qup-uart4-rx { + pins = "gpio19"; + function = "qup04"; + }; + + qup_uart5_cts: qup-uart5-cts { + pins = "gpio20"; + function = "qup05"; + }; + + qup_uart5_rts: qup-uart5-rts { + pins = "gpio21"; + function = "qup05"; + }; + + qup_uart5_tx: qup-uart5-tx { + pins = "gpio22"; + function = "qup05"; + }; + + qup_uart5_rx: qup-uart5-rx { + pins = "gpio23"; + function = "qup05"; + }; + + qup_uart6_cts: qup-uart6-cts { + pins = "gpio24"; + function = "qup06"; + }; + + qup_uart6_rts: qup-uart6-rts { + pins = "gpio25"; + function = "qup06"; + }; + + qup_uart6_tx: qup-uart6-tx { + pins = "gpio26"; + function = "qup06"; + }; + + qup_uart6_rx: qup-uart6-rx { + pins = "gpio27"; + function = "qup06"; + }; + + qup_uart7_cts: qup-uart7-cts { + pins = "gpio28"; + function = "qup07"; + }; + + qup_uart7_rts: qup-uart7-rts { + pins = "gpio29"; + function = "qup07"; + }; + + qup_uart7_tx: qup-uart7-tx { + pins = "gpio30"; + function = "qup07"; + }; + + qup_uart7_rx: qup-uart7-rx { + pins = "gpio31"; + function = "qup07"; + }; + sdc1_on: sdc1-on { clk { pins = "sdc1_clk"; @@ -1573,10 +3364,6 @@ data { pins = "sdc2_data"; }; - - sd-cd { - pins = "gpio91"; - }; }; sdc2_off: sdc2-off { @@ -1598,6 +3385,181 @@ bias-bus-hold; }; }; + + qup_uart8_cts: qup-uart8-cts { + pins = "gpio32"; + function = "qup10"; + }; + + qup_uart8_rts: qup-uart8-rts { + pins = "gpio33"; + function = "qup10"; + }; + + qup_uart8_tx: qup-uart8-tx { + pins = "gpio34"; + function = "qup10"; + }; + + qup_uart8_rx: qup-uart8-rx { + pins = "gpio35"; + function = "qup10"; + }; + + qup_uart9_cts: qup-uart9-cts { + pins = "gpio36"; + function = "qup11"; + }; + + qup_uart9_rts: qup-uart9-rts { + pins = "gpio37"; + function = "qup11"; + }; + + qup_uart9_tx: qup-uart9-tx { + pins = "gpio38"; + function = "qup11"; + }; + + qup_uart9_rx: qup-uart9-rx { + pins = "gpio39"; + function = "qup11"; + }; + + qup_uart10_cts: qup-uart10-cts { + pins = "gpio40"; + function = "qup12"; + }; + + qup_uart10_rts: qup-uart10-rts { + pins = "gpio41"; + function = "qup12"; + }; + + qup_uart10_tx: qup-uart10-tx { + pins = "gpio42"; + function = "qup12"; + }; + + qup_uart10_rx: qup-uart10-rx { + pins = "gpio43"; + function = "qup12"; + }; + + qup_uart11_cts: qup-uart11-cts { + pins = "gpio44"; + function = "qup13"; + }; + + qup_uart11_rts: qup-uart11-rts { + pins = "gpio45"; + function = "qup13"; + }; + + qup_uart11_tx: qup-uart11-tx { + pins = "gpio46"; + function = "qup13"; + }; + + qup_uart11_rx: qup-uart11-rx { + pins = "gpio47"; + function = "qup13"; + }; + + qup_uart12_cts: qup-uart12-cts { + pins = "gpio48"; + function = "qup14"; + }; + + qup_uart12_rts: qup-uart12-rts { + pins = "gpio49"; + function = "qup14"; + }; + + qup_uart12_tx: qup-uart12-tx { + pins = "gpio50"; + function = "qup14"; + }; + + qup_uart12_rx: qup-uart12-rx { + pins = "gpio51"; + function = "qup14"; + }; + + qup_uart13_cts: qup-uart13-cts { + pins = "gpio52"; + function = "qup15"; + }; + + qup_uart13_rts: qup-uart13-rts { + pins = "gpio53"; + function = "qup15"; + }; + + qup_uart13_tx: qup-uart13-tx { + pins = "gpio54"; + function = "qup15"; + }; + + qup_uart13_rx: qup-uart13-rx { + pins = "gpio55"; + function = "qup15"; + }; + + qup_uart14_cts: qup-uart14-cts { + pins = "gpio56"; + function = "qup16"; + }; + + qup_uart14_rts: qup-uart14-rts { + pins = "gpio57"; + function = "qup16"; + }; + + qup_uart14_tx: qup-uart14-tx { + pins = "gpio58"; + function = "qup16"; + }; + + qup_uart14_rx: qup-uart14-rx { + pins = "gpio59"; + function = "qup16"; + }; + + qup_uart15_cts: qup-uart15-cts { + pins = "gpio60"; + function = "qup17"; + }; + + qup_uart15_rts: qup-uart15-rts { + pins = "gpio61"; + function = "qup17"; + }; + + qup_uart15_tx: qup-uart15-tx { + pins = "gpio62"; + function = "qup17"; + }; + + qup_uart15_rx: qup-uart15-rx { + pins = "gpio63"; + function = "qup17"; + }; + }; + + imem@146a5000 { + compatible = "qcom,sc7280-imem", "syscon"; + reg = <0 0x146a5000 0 0x6000>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0 0x146a5000 0x6000>; + + pil-reloc@594c { + compatible = "qcom,pil-reloc-info"; + reg = <0x594c 0xc8>; + }; }; apps_smmu: iommu@15000000 { @@ -2471,16 +4433,16 @@ }; gpuss0-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <100>; polling-delay = <0>; thermal-sensors = <&tsens1 1>; trips { gpuss0_alert0: trip-point0 { - temperature = <90000>; + temperature = <95000>; hysteresis = <2000>; - type = "hot"; + type = "passive"; }; gpuss0_crit: gpuss0-crit { @@ -2489,19 +4451,26 @@ type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&gpuss0_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; gpuss1-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <100>; polling-delay = <0>; thermal-sensors = <&tsens1 2>; trips { gpuss1_alert0: trip-point0 { - temperature = <90000>; + temperature = <95000>; hysteresis = <2000>; - type = "hot"; + type = "passive"; }; gpuss1_crit: gpuss1-crit { @@ -2510,6 +4479,13 @@ type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&gpuss1_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; nspss0-thermal { diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts index a4e1fb8ca52d..71b448978e88 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts @@ -11,6 +11,7 @@ / { model = "Sony Xperia 10"; compatible = "sony,kirin-row", "qcom,sdm630"; + chassis-type = "handset"; chosen { framebuffer@9d400000 { diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts index c574e430ba67..dd484a9bc7cd 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts @@ -11,4 +11,5 @@ / { model = "Sony Xperia XA2 Ultra"; compatible = "sony,discovery-row", "qcom,sdm630"; + chassis-type = "handset"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts index a93ff3ab1b6d..2da83cd41187 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts @@ -11,4 +11,5 @@ / { model = "Sony Xperia XA2"; compatible = "sony,pioneer-row", "qcom,sdm630"; + chassis-type = "handset"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts index 59a679c205e0..a679d4acee29 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts @@ -11,6 +11,7 @@ / { model = "Sony Xperia XA2 Plus"; compatible = "sony,voyager-row", "qcom,sdm630"; + chassis-type = "handset"; chosen { framebuffer@9d400000 { diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi index 849900e8b80e..11d0a8c1cf35 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi @@ -308,7 +308,7 @@ regulator-allow-set-load; }; - vreg_l4b_29p5: l4 { + vreg_l4b_2p95: l4 { regulator-min-microvolt = <2944000>; regulator-max-microvolt = <2952000>; regulator-enable-ramp-delay = <250>; @@ -327,7 +327,7 @@ * Tighten the range to 1.8-3.328 (closest to 3.3) to * make the mmc driver happy. */ - vreg_l5b_29p5: l5 { + vreg_l5b_2p95: l5 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3328000>; regulator-enable-ramp-delay = <250>; @@ -559,14 +559,14 @@ mmc-hs400-1_8v; mmc-hs400-enhanced-strobe; - vmmc-supply = <&vreg_l4b_29p5>; + vmmc-supply = <&vreg_l4b_2p95>; vqmmc-supply = <&vreg_l8a_1p8>; }; &sdhc_2 { status = "okay"; - vmmc-supply = <&vreg_l5b_29p5>; + vmmc-supply = <&vreg_l5b_2p95>; vqmmc-supply = <&vreg_l2b_2p95>; }; diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index 9c7f87e42fcc..3e0165bb61c5 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -541,7 +541,7 @@ <&sleep_clk>; }; - rpm_msg_ram: memory@778000 { + rpm_msg_ram: sram@778000 { compatible = "qcom,rpm-msg-ram"; reg = <0x00778000 0x7000>; }; @@ -1176,6 +1176,11 @@ status = "disabled"; }; + sram@290000 { + compatible = "qcom,rpm-stats"; + reg = <0x00290000 0x10000>; + }; + spmi_bus: spmi@800f000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0800f000 0x1000>, @@ -2020,6 +2025,57 @@ }; }; + venus: video-codec@cc00000 { + compatible = "qcom,sdm660-venus"; + reg = <0x0cc00000 0xff000>; + clocks = <&mmcc VIDEO_CORE_CLK>, + <&mmcc VIDEO_AHB_CLK>, + <&mmcc VIDEO_AXI_CLK>, + <&mmcc THROTTLE_VIDEO_AXI_CLK>; + clock-names = "core", "iface", "bus", "bus_throttle"; + interconnects = <&gnoc 0 &mnoc 13>, + <&mnoc 4 &bimc 5>; + interconnect-names = "cpu-cfg", "video-mem"; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&mmss_smmu 0x400>, + <&mmss_smmu 0x401>, + <&mmss_smmu 0x40a>, + <&mmss_smmu 0x407>, + <&mmss_smmu 0x40e>, + <&mmss_smmu 0x40f>, + <&mmss_smmu 0x408>, + <&mmss_smmu 0x409>, + <&mmss_smmu 0x40b>, + <&mmss_smmu 0x40c>, + <&mmss_smmu 0x40d>, + <&mmss_smmu 0x410>, + <&mmss_smmu 0x421>, + <&mmss_smmu 0x428>, + <&mmss_smmu 0x429>, + <&mmss_smmu 0x42b>, + <&mmss_smmu 0x42c>, + <&mmss_smmu 0x42d>, + <&mmss_smmu 0x411>, + <&mmss_smmu 0x431>; + memory-region = <&venus_region>; + power-domains = <&mmcc VENUS_GDSC>; + status = "disabled"; + + video-decoder { + compatible = "venus-decoder"; + clocks = <&mmcc VIDEO_SUBCORE0_CLK>; + clock-names = "vcodec0_core"; + power-domains = <&mmcc VENUS_CORE0_GDSC>; + }; + + video-encoder { + compatible = "venus-encoder"; + clocks = <&mmcc VIDEO_SUBCORE0_CLK>; + clock-names = "vcodec0_core"; + power-domains = <&mmcc VENUS_CORE0_GDSC>; + }; + }; + mmss_smmu: iommu@cd00000 { compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2"; reg = <0x0cd00000 0x40000>; diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts index 3e677fb7cfea..1edc53fd6941 100644 --- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts +++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts @@ -10,6 +10,7 @@ / { model = "Xiaomi Redmi Note 7"; compatible = "xiaomi,lavender", "qcom,sdm660"; + chassis-type = "handset"; aliases { serial0 = &blsp1_uart2; diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi index dfd1b42c07fd..4a6285a25f77 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi @@ -5,7 +5,6 @@ * Copyright 2018 Google LLC. */ -#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sdm845.dtsi" @@ -616,6 +615,14 @@ ap_ts_i2c: &i2c14 { }; }; +&gmu { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + &ipa { status = "okay"; modem-init; @@ -629,10 +636,6 @@ ap_ts_i2c: &i2c14 { status = "okay"; }; -&mdss_mdp { - status = "okay"; -}; - /* * Cheza fw does not properly program the GPU aperture to allow the * GPU to update the SMMU pagetables for context switches. Work @@ -643,6 +646,8 @@ ap_ts_i2c: &i2c14 { }; &mss_pil { + status = "okay"; + iommus = <&apps_smmu 0x781 0x0>, <&apps_smmu 0x724 0x3>; }; @@ -1317,6 +1322,8 @@ ap_ts_i2c: &i2c14 { }; &venus { + status = "okay"; + video-firmware { iommus = <&apps_smmu 0x10b2 0x0>; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index 2d5533dd4ec2..13f80a0b6faa 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -5,7 +5,6 @@ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/sound/qcom,q6afe.h> @@ -17,6 +16,8 @@ / { model = "Thundercomm Dragonboard 845c"; compatible = "thundercomm,db845c", "qcom,sdm845"; + qcom,msm-id = <341 0x20001>; + qcom,board-id = <8 0>; aliases { serial0 = &uart9; @@ -420,7 +421,12 @@ <GCC_LPASS_SWAY_CLK>; }; +&gmu { + status = "okay"; +}; + &gpu { + status = "okay"; zap-shader { memory-region = <&gpu_mem>; firmware-name = "qcom/sdm845/a630_zap.mbn"; @@ -485,10 +491,6 @@ status = "okay"; }; -&mdss_mdp { - status = "okay"; -}; - &mss_pil { status = "okay"; firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn"; @@ -999,6 +1001,10 @@ vdda-pll-supply = <&vreg_l26a_1p2>; }; +&venus { + status = "okay"; +}; + &wcd9340{ pinctrl-0 = <&wcd_intr_default>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index 52dd7a858231..5e6e8f4fb5be 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -7,7 +7,6 @@ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sdm845.dtsi" @@ -361,9 +360,6 @@ qcom,dual-dsi-mode; qcom,master-dsi; - #address-cells = <1>; - #size-cells = <0>; - ports { port@1 { endpoint { @@ -439,7 +435,13 @@ <GCC_LPASS_SWAY_CLK>; }; +&gmu { + status = "okay"; +}; + &gpu { + status = "okay"; + zap-shader { memory-region = <&gpu_mem>; firmware-name = "qcom/sdm845/a630_zap.mbn"; @@ -460,10 +462,6 @@ status = "okay"; }; -&mdss_mdp { - status = "okay"; -}; - &mss_pil { status = "okay"; firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn"; @@ -566,6 +564,10 @@ vdda-pll-supply = <&vdda_usb2_ss_core>; }; +&venus { + status = "okay"; +}; + &wifi { status = "okay"; vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index d4355522374a..3e04aeb479d1 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -7,7 +7,6 @@ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> @@ -93,7 +92,6 @@ console-size = <0x40000>; ftrace-size = <0x40000>; pmsg-size = <0x200000>; - devinfo-size = <0x1000>; ecc-size = <16>; }; }; @@ -248,6 +246,12 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + vdda_qusb_hs0_3p1: vreg_l24a_3p075: ldo24 { regulator-min-microvolt = <3088000>; @@ -315,9 +319,6 @@ status = "okay"; vdda-supply = <&vdda_mipi_dsi0_1p2>; - #address-cells = <1>; - #size-cells = <0>; - /* * Both devices use different panels but all other properties * are common. Compatible line is declared in device dts. @@ -362,7 +363,13 @@ <GCC_LPASS_SWAY_CLK>; }; +&gmu { + status = "okay"; +}; + &gpu { + status = "okay"; + zap-shader { memory-region = <&gpu_mem>; firmware-name = "qcom/sdm845/oneplus6/a630_zap.mbn"; @@ -415,10 +422,6 @@ status = "okay"; }; -&mdss_mdp { - status = "okay"; -}; - /* Modem/wifi*/ &mss_pil { status = "okay"; @@ -641,12 +644,17 @@ }; }; +&venus { + status = "okay"; +}; + &wifi { status = "okay"; vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; vdd-1.8-xo-supply = <&vreg_l7a_1p8>; vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; qcom,snoc-host-cap-8bit-quirk; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts index 72842c887617..73493079d13e 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts @@ -10,6 +10,7 @@ / { model = "OnePlus 6"; compatible = "oneplus,enchilada", "qcom,sdm845"; + chassis-type = "handset"; }; &display_panel { diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts index 969b36dc9e2c..b63ebc48f62f 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts @@ -10,6 +10,7 @@ / { model = "OnePlus 6T"; compatible = "oneplus,fajita", "qcom,sdm845"; + chassis-type = "handset"; }; &display_panel { diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts index c60c8c640e17..580d4cc1296f 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts @@ -2,7 +2,6 @@ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/sound/qcom,q6afe.h> @@ -29,6 +28,7 @@ / { model = "Xiaomi Pocophone F1"; compatible = "xiaomi,beryllium", "qcom,sdm845"; + chassis-type = "handset"; /* required for bootloader to select correct board */ qcom,board-id = <69 0>; @@ -215,9 +215,6 @@ status = "okay"; vdda-supply = <&vreg_l26a_1p2>; - #address-cells = <1>; - #size-cells = <0>; - panel@0 { compatible = "tianma,fhd-video"; reg = <0>; @@ -256,7 +253,13 @@ <GCC_LPASS_SWAY_CLK>; }; +&gmu { + status = "okay"; +}; + &gpu { + status = "okay"; + zap-shader { memory-region = <&gpu_mem>; firmware-name = "qcom/sdm845/a630_zap.mbn"; @@ -284,10 +287,6 @@ status = "okay"; }; -&mdss_mdp { - status = "okay"; -}; - &mss_pil { status = "okay"; firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mdt"; @@ -513,6 +512,10 @@ vdda-pll-supply = <&vreg_l1a_0p875>; }; +&venus { + status = "okay"; +}; + &wcd9340{ pinctrl-0 = <&wcd_intr_default>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index b3b911926184..526087586ba4 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -12,6 +12,7 @@ #include <dt-bindings/clock/qcom,lpass-sdm845.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,videocc-sdm845.h> +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sdm845.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -99,9 +100,11 @@ no-map; }; - smem_mem: memory@86000000 { + smem@86000000 { + compatible = "qcom,smem"; reg = <0x0 0x86000000 0 0x200000>; no-map; + hwlocks = <&tcsr_mutex 3>; }; tz_mem: memory@86200000 { @@ -768,6 +771,8 @@ memory-region = <&adsp_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&adsp_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -867,6 +872,8 @@ memory-region = <&cdsp_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&cdsp_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -941,12 +948,6 @@ #hwlock-cells = <1>; }; - smem { - compatible = "qcom,smem"; - memory-region = <&smem_mem>; - hwlocks = <&tcsr_mutex 3>; - }; - smp2p-cdsp { compatible = "qcom,smp2p"; qcom,smem = <94>, <432>; @@ -1995,10 +1996,10 @@ interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, <&gcc GCC_PCIE_0_AUX_CLK>, @@ -2064,7 +2065,7 @@ status = "disabled"; - pcie0_lane: lanes@1c06200 { + pcie0_lane: phy@1c06200 { reg = <0 0x01c06200 0 0x128>, <0 0x01c06400 0 0x1fc>, <0 0x01c06800 0 0x218>, @@ -2100,10 +2101,10 @@ interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, <&gcc GCC_PCIE_1_AUX_CLK>, @@ -2174,7 +2175,7 @@ status = "disabled"; - pcie1_lane: lanes@1c06200 { + pcie1_lane: phy@1c06200 { reg = <0 0x01c0a800 0 0x800>, <0 0x01c0a800 0 0x800>, <0 0x01c0b800 0 0x400>; @@ -2302,7 +2303,7 @@ reset-names = "ufsphy"; status = "disabled"; - ufs_mem_phy_lanes: lanes@1d87400 { + ufs_mem_phy_lanes: phy@1d87400 { reg = <0 0x01d87400 0 0x108>, <0 0x01d87600 0 0x1e0>, <0 0x01d87c00 0 0x1dc>, @@ -2312,15 +2313,15 @@ }; }; - cryptobam: dma@1dc4000 { + cryptobam: dma-controller@1dc4000 { compatible = "qcom,bam-v1.7.0"; reg = <0 0x01dc4000 0 0x24000>; interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rpmhcc 15>; + clocks = <&rpmhcc RPMH_CE_CLK>; clock-names = "bam_clk"; #dma-cells = <1>; qcom,ee = <0>; - qcom,controlled-remotely = <1>; + qcom,controlled-remotely; iommus = <&apps_smmu 0x704 0x1>, <&apps_smmu 0x706 0x1>, <&apps_smmu 0x714 0x1>, @@ -2331,8 +2332,8 @@ compatible = "qcom,crypto-v5.4"; reg = <0 0x01dfa000 0 0x6000>; clocks = <&gcc GCC_CE1_AHB_CLK>, - <&gcc GCC_CE1_AHB_CLK>, - <&rpmhcc 15>; + <&gcc GCC_CE1_AXI_CLK>, + <&rpmhcc RPMH_CE_CLK>; clock-names = "iface", "bus", "core"; dmas = <&cryptobam 6>, <&cryptobam 7>; dma-names = "rx", "tx"; @@ -2984,6 +2985,8 @@ clock-names = "iface", "bus", "mem", "gpll0_mss", "snoc_axi", "mnoc_axi", "prng", "xo"; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&modem_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -2993,11 +2996,12 @@ qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; - power-domains = <&aoss_qmp 2>, - <&rpmhpd SDM845_CX>, + power-domains = <&rpmhpd SDM845_CX>, <&rpmhpd SDM845_MX>, <&rpmhpd SDM845_MSS>; - power-domain-names = "load_state", "cx", "mx", "mss"; + power-domain-names = "cx", "mx", "mss"; + + status = "disabled"; mba { memory-region = <&mba_region>; @@ -3497,8 +3501,9 @@ interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC2_AHB_CLK>, - <&gcc GCC_SDCC2_APPS_CLK>; - clock-names = "iface", "core"; + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; iommus = <&apps_smmu 0xa0 0xf>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&sdhc2_opp_table>; @@ -3646,6 +3651,30 @@ }; }; + lmh_cluster1: lmh@17d70800 { + compatible = "qcom,sdm845-lmh"; + reg = <0 0x17d70800 0 0x400>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + cpus = <&CPU4>; + qcom,lmh-temp-arm-millicelsius = <65000>; + qcom,lmh-temp-low-millicelsius = <94500>; + qcom,lmh-temp-high-millicelsius = <95000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + lmh_cluster0: lmh@17d78800 { + compatible = "qcom,sdm845-lmh"; + reg = <0 0x17d78800 0 0x400>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + cpus = <&CPU0>; + qcom,lmh-temp-arm-millicelsius = <65000>; + qcom,lmh-temp-low-millicelsius = <94500>; + qcom,lmh-temp-high-millicelsius = <95000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + sound: sound { }; @@ -3683,7 +3712,6 @@ compatible = "qcom,sdm845-qmp-usb3-phy"; reg = <0 0x088e9000 0 0x18c>, <0 0x088e8000 0 0x10>; - reg-names = "reg-base", "dp_com"; status = "disabled"; #address-cells = <2>; #size-cells = <2>; @@ -3699,7 +3727,7 @@ <&gcc GCC_USB3_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: lanes@88e9200 { + usb_1_ssphy: phy@88e9200 { reg = <0 0x088e9200 0 0x128>, <0 0x088e9400 0 0x200>, <0 0x088e9c00 0 0x218>, @@ -3732,7 +3760,7 @@ <&gcc GCC_USB3_PHY_SEC_BCR>; reset-names = "phy", "common"; - usb_2_ssphy: lane@88eb200 { + usb_2_ssphy: phy@88eb200 { reg = <0 0x088eb200 0 0x128>, <0 0x088eb400 0 0x1fc>, <0 0x088eb800 0 0x218>, @@ -3868,6 +3896,8 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>; interconnect-names = "video-mem", "cpu-cfg"; + status = "disabled"; + video-core0 { compatible = "venus-decoder"; }; @@ -4194,8 +4224,6 @@ interrupt-parent = <&mdss>; interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - ports { #address-cells = <1>; #size-cells = <0>; @@ -4271,6 +4299,9 @@ status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -4340,6 +4371,9 @@ status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -4402,6 +4436,8 @@ interconnects = <&mem_noc MASTER_GFX3D 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "gfx-mem"; + status = "disabled"; + gpu_opp_table: opp-table { compatible = "operating-points-v2"; @@ -4497,6 +4533,8 @@ operating-points-v2 = <&gmu_opp_table>; + status = "disabled"; + gmu_opp_table: opp-table { compatible = "operating-points-v2"; @@ -4588,7 +4626,6 @@ mboxes = <&apss_shared 0>; #clock-cells = <0>; - #power-domain-cells = <1>; cx_cdev: cx { #cooling-cells = <2>; @@ -4917,6 +4954,8 @@ reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>; reg-names = "freq-domain0", "freq-domain1"; + interrupts-extended = <&lmh_cluster0 0>, <&lmh_cluster1 0>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; clock-names = "xo", "alternate"; @@ -4974,23 +5013,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu0_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu0_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu1-thermal { @@ -5018,23 +5040,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu1_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu1_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu2-thermal { @@ -5062,23 +5067,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu2_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu2_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu3-thermal { @@ -5106,23 +5094,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu3_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu3_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu4-thermal { @@ -5150,23 +5121,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu4_alert0>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu4_alert1>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu5-thermal { @@ -5194,23 +5148,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu5_alert0>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu5_alert1>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu6-thermal { @@ -5238,23 +5175,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu6_alert0>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu6_alert1>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu7-thermal { @@ -5282,23 +5202,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu7_alert0>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu7_alert1>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; aoss0-thermal { diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index 2ba23aa582a1..d6b2ba4396f6 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -7,7 +7,6 @@ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/gpio-keys.h> #include <dt-bindings/input/input.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> @@ -30,6 +29,7 @@ / { model = "Lenovo Yoga C630"; compatible = "lenovo,yoga-c630", "qcom,sdm845"; + chassis-type = "convertible"; aliases { hsuart0 = &uart6; @@ -264,6 +264,9 @@ }; vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vdda_qusb_hs0_3p1: @@ -341,7 +344,12 @@ <GCC_LPASS_SWAY_CLK>; }; +&gmu { + status = "okay"; +}; + &gpu { + status = "okay"; zap-shader { memory-region = <&gpu_mem>; firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn"; @@ -458,11 +466,8 @@ status = "okay"; }; -&mdss_mdp { - status = "okay"; -}; - &mss_pil { + status = "okay"; firmware-name = "qcom/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/LENOVO/81JL/qcdsp2850.mbn"; }; @@ -649,6 +654,7 @@ vddxo-supply = <&vreg_l7a_1p8>; vddrf-supply = <&vreg_l17a_1p3>; vddch0-supply = <&vreg_l25a_3p3>; + vddch1-supply = <&vreg_l23a_3p3>; max-speed = <3200000>; }; }; @@ -723,6 +729,10 @@ vdda-pll-supply = <&vdda_usb2_ss_core>; }; +&venus { + status = "okay"; +}; + &wcd9340{ pinctrl-0 = <&wcd_intr_default>; pinctrl-names = "default"; @@ -763,6 +773,7 @@ vdd-1.8-xo-supply = <&vreg_l7a_1p8>; vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; qcom,snoc-host-cap-8bit-quirk; }; diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts index 58b6b2742d3f..45eab0235d66 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts @@ -17,6 +17,7 @@ model = "Sony Xperia 10 II"; compatible = "sony,pdx201", "qcom,sm6125"; + chassis-type = "handset"; chosen { #address-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi index 2b37ce6a9f9c..51286ddbdb10 100644 --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -326,8 +326,8 @@ tlmm: pinctrl@500000 { compatible = "qcom,sm6125-tlmm"; reg = <0x00500000 0x400000>, - <0x00900000 0x400000>, - <0x00d00000 0x400000>; + <0x00900000 0x400000>, + <0x00d00000 0x400000>; reg-names = "west", "south", "east"; interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; @@ -380,7 +380,7 @@ status = "disabled"; }; - rpm_msg_ram: memory@45f0000 { + rpm_msg_ram: sram@45f0000 { compatible = "qcom,rpm-msg-ram"; reg = <0x045f0000 0x7000>; }; @@ -391,12 +391,12 @@ reg-names = "hc", "core"; interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC1_AHB_CLK>, - <&gcc GCC_SDCC1_APPS_CLK>, - <&xo_board>; + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>; clock-names = "iface", "core", "xo"; bus-width = <8>; non-removable; @@ -409,12 +409,12 @@ reg-names = "hc"; interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC2_AHB_CLK>, - <&gcc GCC_SDCC2_APPS_CLK>, - <&xo_board>; + <&gcc GCC_SDCC2_APPS_CLK>, + <&xo_board>; clock-names = "iface", "core", "xo"; pinctrl-0 = <&sdc2_state_on>; @@ -433,11 +433,11 @@ ranges; clocks = <&gcc GCC_USB30_PRIM_MASTER_CLK>, - <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, - <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB3_PRIM_CLKREF_CLK>, - <&gcc GCC_USB30_PRIM_SLEEP_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>; @@ -460,13 +460,18 @@ }; }; + sram@4690000 { + compatible = "qcom,rpm-stats"; + reg = <0x04690000 0x10000>; + }; + spmi_bus: spmi@1c40000 { compatible = "qcom,spmi-pmic-arb"; - reg = <0x01c40000 0x1100>, - <0x01e00000 0x2000000>, - <0x03e00000 0x100000>, - <0x03f00000 0xa0000>, - <0x01c0a000 0x26000>; + reg = <0x01c40000 0x1100>, + <0x01e00000 0x2000000>, + <0x03e00000 0x100000>, + <0x03f00000 0xa0000>, + <0x01c0a000 0x26000>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupt-names = "periph_irq"; interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; @@ -494,22 +499,22 @@ reg = <0x0f120000 0x1000>; clock-frequency = <19200000>; - frame@0f121000 { + frame@f121000 { frame-number = <0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0f121000 0x1000>, <0x0f122000 0x1000>; }; - frame@0f123000 { + frame@f123000 { frame-number = <1>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0f123000 0x1000>; status = "disabled"; }; - frame@0f124000 { + frame@f124000 { frame-number = <2>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0f124000 0x1000>; @@ -548,7 +553,7 @@ intc: interrupt-controller@f200000 { compatible = "arm,gic-v3"; reg = <0x0f200000 0x20000>, - <0x0f300000 0x100000>; + <0x0f300000 0x100000>; #interrupt-cells = <3>; interrupt-controller; interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; @@ -558,9 +563,9 @@ timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 1 0xf08 - GIC_PPI 2 0xf08 - GIC_PPI 3 0xf08 - GIC_PPI 0 0xf08>; + GIC_PPI 2 0xf08 + GIC_PPI 3 0xf08 + GIC_PPI 0 0xf08>; clock-frequency = <19200000>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts new file mode 100644 index 000000000000..36911b9a5c04 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> + */ +/dts-v1/; + +#include "sm6350.dtsi" + +/ { + model = "Sony Xperia 10 III"; + compatible = "sony,pdx213", "qcom,sm6350"; + chassis-type = "handset"; + qcom,msm-id = <434 0x10000>, <459 0x10000>; + qcom,board-id = <0x1000B 0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer: framebuffer@a0000000 { + compatible = "simple-framebuffer"; + reg = <0 0xa0000000 0 0x2300000>; + width = <1080>; + height = <2520>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + clocks = <&gcc GCC_DISP_AXI_CLK>; + }; + }; +}; + +&sdhc_2 { + status = "okay"; + + cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; +}; + +&tlmm { + gpio-reserved-ranges = <13 4>, <45 2>, <56 2>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + maximum-speed = "super-speed"; + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; +}; + +&usb_1_qmpphy { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi new file mode 100644 index 000000000000..973e18fe3b67 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -0,0 +1,965 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +#include <dt-bindings/clock/qcom,gcc-sm6350.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> + +/ { + interrupt-parent = <&intc>; + #address-cells = <2>; + #size-cells = <2>; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <76800000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32764>; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x0>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x100>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_100>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x200>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_200>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x300>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_300>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x400>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_400>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x500>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_500>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x600>; + enable-method = "psci"; + capacity-dmips-mhz = <1894>; + dynamic-power-coefficient = <703>; + next-level-cache = <&L2_600>; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x700>; + enable-method = "psci"; + capacity-dmips-mhz = <1894>; + dynamic-power-coefficient = <703>; + next-level-cache = <&L2_700>; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm6350", "qcom,scm"; + #reset-cells = <1>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_LOW>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@80000000 { + reg = <0 0x80000000 0 0x600000>; + no-map; + }; + + xbl_aop_mem: memory@80700000 { + reg = <0 0x80700000 0 0x160000>; + no-map; + }; + + cmd_db: memory@80860000 { + compatible = "qcom,cmd-db"; + reg = <0 0x80860000 0 0x20000>; + no-map; + }; + + sec_apps_mem: memory@808ff000 { + reg = <0 0x808ff000 0 0x1000>; + no-map; + }; + + smem_mem: memory@80900000 { + reg = <0 0x80900000 0 0x200000>; + no-map; + }; + + cdsp_sec_mem: memory@80b00000 { + reg = <0 0x80b00000 0 0x1e00000>; + no-map; + }; + + pil_camera_mem: memory@86000000 { + reg = <0 0x86000000 0 0x500000>; + no-map; + }; + + pil_npu_mem: memory@86500000 { + reg = <0 0x86500000 0 0x500000>; + no-map; + }; + + pil_video_mem: memory@86a00000 { + reg = <0 0x86a00000 0 0x500000>; + no-map; + }; + + pil_cdsp_mem: memory@86f00000 { + reg = <0 0x86f00000 0 0x1e00000>; + no-map; + }; + + pil_adsp_mem: memory@88d00000 { + reg = <0 0x88d00000 0 0x2800000>; + no-map; + }; + + wlan_fw_mem: memory@8b500000 { + reg = <0 0x8b500000 0 0x200000>; + no-map; + }; + + pil_ipa_fw_mem: memory@8b700000 { + reg = <0 0x8b700000 0 0x10000>; + no-map; + }; + + pil_ipa_gsi_mem: memory@8b710000 { + reg = <0 0x8b710000 0 0x5400>; + no-map; + }; + + pil_gpu_mem: memory@8b715400 { + reg = <0 0x8b715400 0 0x2000>; + no-map; + }; + + pil_modem_mem: memory@8b800000 { + reg = <0 0x8b800000 0 0xf800000>; + no-map; + }; + + cont_splash_memory: memory@a0000000 { + reg = <0 0xa0000000 0 0x2300000>; + no-map; + }; + + dfps_data_memory: memory@a2300000 { + reg = <0 0xa2300000 0 0x100000>; + no-map; + }; + + removed_region: memory@c0000000 { + reg = <0 0xc0000000 0 0x3900000>; + no-map; + }; + + debug_region: memory@ffb00000 { + reg = <0 0xffb00000 0 0xc0000>; + no-map; + }; + + last_log_region: memory@ffbc0000 { + reg = <0 0xffbc0000 0 0x40000>; + no-map; + }; + + ramoops: ramoops@ffc00000 { + compatible = "removed-dma-pool", "ramoops"; + reg = <0 0xffc00000 0 0x00100000>; + record-size = <0x1000>; + console-size = <0x40000>; + ftrace-size = <0x0>; + msg-size = <0x20000 0x20000>; + cc-size = <0x0>; + no-map; + }; + + cmdline_region: memory@ffd00000 { + reg = <0 0xffd00000 0 0x1000>; + no-map; + }; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sm6350"; + reg = <0 0x00100000 0 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "bi_tcxo", + "bi_tcxo_ao", + "sleep_clk"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + }; + + ipcc: mailbox@408000 { + compatible = "qcom,sm6350-ipcc", "qcom,ipcc"; + reg = <0 0x00408000 0 0x1000>; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + rng: rng@793000 { + compatible = "qcom,prng-ee"; + reg = <0 0x00793000 0 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + sdhc_1: sdhci@7c4000 { + compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x007c4000 0 0x1000>, + <0 0x007c5000 0 0x1000>, + <0 0x007c8000 0 0x8000>; + reg-names = "hc", "cqhci", "ice"; + + interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + qcom,dll-config = <0x000f642c>; + qcom,ddr-config = <0x80040868>; + power-domains = <&rpmhpd 0>; + operating-points-v2 = <&sdhc1_opp_table>; + bus-width = <8>; + non-removable; + supports-cqe; + + status = "disabled"; + + sdhc1_opp_table: sdhc1-opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + qupv3_id_1: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x9c0000 0x0 0x2000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + iommus = <&apps_smmu 0x4c3 0x0>; + ranges; + status = "disabled"; + + uart2: serial@98c000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x98c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart2_default>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x40000>; + #hwlock-cells = <1>; + }; + + sdhc_2: sdhci@8804000 { + compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + power-domains = <&rpmhpd 0>; + operating-points-v2 = <&sdhc2_opp_table>; + bus-width = <4>; + + status = "disabled"; + + sdhc2_opp_table: sdhc2-opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sm6350-qusb2-phy", "qcom,qusb2-v2-phy"; + reg = <0 0x088e3000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&xo_board>, <&rpmhcc RPMH_CXO_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + }; + + usb_1_qmpphy: phy@88e9000 { + compatible = "qcom,sc7180-qmp-usb3-dp-phy"; + reg = <0 0x088e9000 0 0x200>, + <0 0x088e8000 0 0x40>, + <0 0x088ea000 0 0x200>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_QLINK_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&xo_board>; + clock-names = "aux", "ref", "com_aux", "cfg_ahb"; + + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, + <&gcc GCC_USB3_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + usb_1_ssphy: usb3-phy@88e9200 { + reg = <0 0x088e9200 0 0x200>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x400>, + <0 0x088e9600 0 0x200>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x100>; + #clock-cells = <0>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + + dp_phy: dp-phy@88ea200 { + reg = <0 0x088ea200 0 0x200>, + <0 0x088ea400 0 0x200>, + <0 0x088eac00 0 0x400>, + <0 0x088ea600 0 0x200>, + <0 0x088ea800 0 0x200>, + <0 0x088eaa00 0 0x100>; + #phy-cells = <0>; + #clock-cells = <1>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + }; + + system-cache-controller@9200000 { + compatible = "qcom,sm6350-llcc"; + reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sm6350-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep"; + + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", + "dm_hs_phy_irq", "ss_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x540 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,has-lpm-erratum; + snps,hird-threshold = /bits/ 8 <0x10>; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sm6350-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x64>; + qcom,pdc-ranges = <0 480 94>, <94 609 31>, + <125 63 1>, <126 655 12>, <138 139 15>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sm6350-tsens", "qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x8>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 28 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sm6350-tsens", "qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x8>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 29 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + aoss_qmp: power-controller@c300000 { + compatible = "qcom,sm6350-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x1000>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + #power-domain-cells = <1>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0 0xc440000 0 0x1100>, + <0 0xc600000 0 0x2000000>, + <0 0xe600000 0 0x100000>, + <0 0xe700000 0 0xa0000>, + <0 0xc40a000 0 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sm6350-tlmm"; + reg = <0 0x0f100000 0 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 157>; + + qup_uart2_default: qup-uart2-default { + pins = "gpio25", "gpio26"; + function = "qup13_f2"; + drive-strength = <2>; + bias-disable; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sm6350-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ + interrupts = <GIC_PPI 8 IRQ_TYPE_LEVEL_HIGH>; + }; + + watchdog@17c10000 { + compatible = "qcom,apss-wdt-sm6350", "qcom,kpss-wdt"; + reg = <0 0x17c10000 0 0x1000>; + clocks = <&sleep_clk>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + }; + + timer@17c20000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17c20000 0x0 0x1000>; + clock-frequency = <19200000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + frame@17c21000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c21000 0x0 0x1000>, + <0x0 0x17c22000 0x0 0x1000>; + }; + + frame@17c23000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c23000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c25000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c25000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c27000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c27000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c29000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c29000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c2b000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c2b000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c2d000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c2d000 0x0 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + compatible = "qcom,rpmh-rsc"; + label = "apps_rsc"; + reg = <0x0 0x18200000 0x0 0x10000>, + <0x0 0x18210000 0x0 0x10000>, + <0x0 0x18220000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>, + <WAKE_TCS 3>, <CONTROL_TCS 1>; + + rpmhcc: clock-controller { + compatible = "qcom,sm6350-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sm6350-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + + apps_bcm_voter: bcm_voter { + compatible = "qcom,bcm-voter"; + }; + }; + + cpufreq_hw: cpufreq@18323000 { + compatible = "qcom,cpufreq-hw"; + reg = <0 0x18323000 0 0x1000>, <0 0x18325800 0 0x1000>; + reg-names = "freq-domain0", "freq-domain1"; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + clock-frequency = <19200000>; + interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts new file mode 100644 index 000000000000..8d6fd22873e0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -0,0 +1,320 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm7225.dtsi" +#include "pm6350.dtsi" + +/ { + model = "Fairphone 4"; + compatible = "fairphone,fp4", "qcom,sm7225"; + + /* required for bootloader to select correct board */ + qcom,msm-id = <434 0x10000>, <459 0x10000>; + qcom,board-id = <8 32>; + + aliases { + serial0 = &uart2; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "serial0:115200n8"; + + framebuffer0: framebuffer@a000000 { + compatible = "simple-framebuffer"; + reg = <0 0xa0000000 0 (2340 * 1080 * 4)>; + width = <1080>; + height = <2340>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin>; + + volume-up { + label = "volume_up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm6350_gpios 2 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&apps_rsc { + pm6350-rpmh-regulators { + compatible = "qcom,pm6350-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_s1a: smps1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_s2a: smps2 { + regulator-min-microvolt = <1503000>; + regulator-max-microvolt = <2048000>; + }; + + vreg_l2a: ldo2 { + regulator-min-microvolt = <1503000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3a: ldo3 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4a: ldo4 { + regulator-min-microvolt = <352000>; + regulator-max-microvolt = <801000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5a: ldo5 { + regulator-min-microvolt = <1503000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a: ldo6 { + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a: ldo7 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a: ldo8 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a: ldo9 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3401000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11a: ldo11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12a: ldo12 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a: ldo13 { + regulator-min-microvolt = <570000>; + regulator-max-microvolt = <650000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a: ldo14 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a: ldo15 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1305000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a: ldo16 { + regulator-min-microvolt = <830000>; + regulator-max-microvolt = <921000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a: ldo18 { + regulator-min-microvolt = <788000>; + regulator-max-microvolt = <1049000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19a: ldo19 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1305000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20a: ldo20 { + regulator-min-microvolt = <530000>; + regulator-max-microvolt = <801000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l21a: ldo21 { + regulator-min-microvolt = <751000>; + regulator-max-microvolt = <825000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l22a: ldo22 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1305000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm6150l-rpmh-regulators { + compatible = "qcom,pm6150l-rpmh-regulators"; + qcom,pmic-id = "e"; + + vreg_s8e: smps8 { + regulator-min-microvolt = <313000>; + regulator-max-microvolt = <1395000>; + }; + + vreg_l1e: ldo1 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2e: ldo2 { + regulator-min-microvolt = <1170000>; + regulator-max-microvolt = <1305000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e: ldo3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1299000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4e: ldo4 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5e: ldo5 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6e: ldo6 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7e: ldo7 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8e: ldo8 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9e: ldo9 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10e: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3401000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11e: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3401000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <5492000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-bypass; + }; + }; +}; + +&pm6350_gpios { + gpio_keys_pin: gpio-keys-pin { + pins = "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-pull-up; + input-enable; + power-source = <0>; + }; +}; + +&pm6350_resin { + status = "okay"; + linux,code = <KEY_VOLUMEDOWN>; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <13 4>, <56 2>; +}; + +&uart2 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + maximum-speed = "super-speed"; + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vreg_l18a>; + vdda-pll-supply = <&vreg_l2a>; + vdda-phy-dpdm-supply = <&vreg_l3a>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l22a>; + vdda-pll-supply = <&vreg_l16a>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm7225.dtsi b/arch/arm64/boot/dts/qcom/sm7225.dtsi new file mode 100644 index 000000000000..7b2a002ca7ff --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm7225.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz> + */ + +#include "sm6350.dtsi" + +/* SM7225 uses Kryo 570 instead of Kryo 560 */ +&CPU0 { compatible = "qcom,kryo570"; }; +&CPU1 { compatible = "qcom,kryo570"; }; +&CPU2 { compatible = "qcom,kryo570"; }; +&CPU3 { compatible = "qcom,kryo570"; }; +&CPU4 { compatible = "qcom,kryo570"; }; +&CPU5 { compatible = "qcom,kryo570"; }; +&CPU6 { compatible = "qcom,kryo570"; }; +&CPU7 { compatible = "qcom,kryo570"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts index 335aa0753fc0..37ddca0f0223 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts @@ -419,9 +419,7 @@ status = "okay"; vdda-phy-supply = <&vdda_ufs_2ln_core_1>; - vdda-max-microamp = <90200>; vdda-pll-supply = <&vreg_l3c_1p2>; - vdda-pll-max-microamp = <19000>; }; &usb_1_hsphy { diff --git a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts index 736da9af44e0..5901c28e6696 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts @@ -15,6 +15,7 @@ / { model = "Microsoft Surface Duo"; compatible = "microsoft,surface-duo", "qcom,sm8150"; + chassis-type = "handset"; aliases { serial0 = &uart2; @@ -507,9 +508,7 @@ status = "okay"; vdda-phy-supply = <&vdda_ufs_2ln_core_1>; - vdda-max-microamp = <90200>; vdda-pll-supply = <&vreg_l3c_1p2>; - vdda-pll-max-microamp = <19000>; }; &usb_1_hsphy { diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts index b484371a6044..46b5cf9a1192 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts @@ -416,9 +416,7 @@ status = "okay"; vdda-phy-supply = <&vdda_ufs_2ln_core_1>; - vdda-max-microamp = <90200>; vdda-pll-supply = <&vreg_l3c_1p2>; - vdda-pll-max-microamp = <19000>; }; &usb_1_hsphy { diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts index 3b55fdda767a..b2780403255e 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts @@ -10,6 +10,7 @@ / { model = "Sony Xperia 5"; compatible = "sony,bahamut-generic", "qcom,sm8150"; + chassis-type = "handset"; }; &framebuffer { diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts index 6f490ec284bd..0d6deceedf46 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts @@ -10,4 +10,5 @@ / { model = "Sony Xperia 1"; compatible = "sony,griffin-generic", "qcom,sm8150"; + chassis-type = "handset"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index ef0232c2cf45..81b4ff2cc4cd 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -6,7 +6,6 @@ #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/power/qcom-aoss-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/clock/qcom,rpmh.h> @@ -1692,7 +1691,7 @@ reset-names = "ufsphy"; status = "disabled"; - ufs_mem_phy_lanes: lanes@1d87400 { + ufs_mem_phy_lanes: phy@1d87400 { reg = <0 0x01d87400 0 0x108>, <0 0x01d87600 0 0x1e0>, <0 0x01d87c00 0 0x1dc>, @@ -1729,13 +1728,14 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>, - <&rpmhpd 3>, + power-domains = <&rpmhpd 3>, <&rpmhpd 2>; - power-domain-names = "load_state", "lcx", "lmx"; + power-domain-names = "lcx", "lmx"; memory-region = <&slpi_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&slpi_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -1746,6 +1746,33 @@ label = "dsps"; qcom,remote-pid = <3>; mboxes = <&apss_shared 24>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "sdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x05a1 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x05a2 0x0>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x05a3 0x0>; + /* note: shared-cb = <4> in downstream */ + }; + }; }; }; @@ -2319,13 +2346,14 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>, - <&rpmhpd 7>, + power-domains = <&rpmhpd 7>, <&rpmhpd 0>; - power-domain-names = "load_state", "cx", "mss"; + power-domain-names = "cx", "mss"; memory-region = <&mpss_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&modem_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -2945,12 +2973,12 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>, - <&rpmhpd 7>; - power-domain-names = "load_state", "cx"; + power-domains = <&rpmhpd 7>; memory-region = <&cdsp_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&cdsp_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -2961,6 +2989,72 @@ label = "cdsp"; qcom,remote-pid = <5>; mboxes = <&apss_shared 4>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x1401 0x2040>, + <&apps_smmu 0x1421 0x0>, + <&apps_smmu 0x2001 0x420>, + <&apps_smmu 0x2041 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x2 0x3440>, + <&apps_smmu 0x22 0x3400>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x3 0x3440>, + <&apps_smmu 0x1423 0x0>, + <&apps_smmu 0x2023 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x4 0x3440>, + <&apps_smmu 0x24 0x3400>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x5 0x3440>, + <&apps_smmu 0x25 0x3400>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x6 0x3460>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x7 0x3460>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x8 0x3460>; + }; + + /* note: secure cb9 in downstream */ + }; }; }; @@ -2994,7 +3088,6 @@ compatible = "qcom,sm8150-qmp-usb3-phy"; reg = <0 0x088e9000 0 0x18c>, <0 0x088e8000 0 0x10>; - reg-names = "reg-base", "dp_com"; status = "disabled"; #address-cells = <2>; #size-cells = <2>; @@ -3010,7 +3103,7 @@ <&gcc GCC_USB3_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: lanes@88e9200 { + usb_1_ssphy: phy@88e9200 { reg = <0 0x088e9200 0 0x200>, <0 0x088e9400 0 0x200>, <0 0x088e9c00 0 0x218>, @@ -3043,7 +3136,7 @@ <&gcc GCC_USB3_PHY_SEC_BCR>; reset-names = "phy", "common"; - usb_2_ssphy: lane@88eb200 { + usb_2_ssphy: phy@88eb200 { reg = <0 0x088eb200 0 0x200>, <0 0x088eb400 0 0x200>, <0 0x088eb800 0 0x800>, @@ -3169,12 +3262,16 @@ aoss_qmp: power-controller@c300000 { compatible = "qcom,sm8150-aoss-qmp"; - reg = <0x0 0x0c300000 0x0 0x100000>; + reg = <0x0 0x0c300000 0x0 0x400>; interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; mboxes = <&apss_shared 0>; #clock-cells = <0>; - #power-domain-cells = <1>; + }; + + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; }; tsens0: thermal-sensor@c263000 { @@ -3321,12 +3418,12 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>, - <&rpmhpd 7>; - power-domain-names = "load_state", "cx"; + power-domains = <&rpmhpd 7>; memory-region = <&adsp_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&adsp_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -3337,6 +3434,32 @@ label = "lpass"; qcom,remote-pid = <2>; mboxes = <&apss_shared 8>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1b23 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1b24 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1b25 0x0>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts index 47742816ac2f..3b082472062b 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts @@ -409,9 +409,7 @@ status = "okay"; vdda-phy-supply = <&vreg_l5a_0p88>; - vdda-max-microamp = <89900>; vdda-pll-supply = <&vreg_l9a_1p2>; - vdda-pll-max-microamp = <18800>; }; &usb_1_hsphy { diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts index 062b944be91d..5ffbcdd387ba 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts @@ -647,9 +647,7 @@ status = "okay"; vdda-phy-supply = <&vreg_l5a_0p875>; - vdda-max-microamp = <90200>; vdda-pll-supply = <&vreg_l9a_1p2>; - vdda-pll-max-microamp = <19000>; }; &usb_1 { diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts index 79afeb07f4a2..356a81698731 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts @@ -10,6 +10,7 @@ / { model = "Sony Xperia 1 II"; compatible = "sony,pdx203-generic", "qcom,sm8250"; + chassis-type = "handset"; }; /delete-node/ &vreg_l7f_1p8; diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts index 16c96e838534..5ecf7dafb2ec 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts @@ -10,6 +10,7 @@ / { model = "Sony Xperia 5 II"; compatible = "sony,pdx206-generic", "qcom,sm8250"; + chassis-type = "handset"; }; &framebuffer { diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index d12e4cbfc852..6f6129b39c9c 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -13,7 +13,6 @@ #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sm8250.h> #include <dt-bindings/mailbox/qcom-ipcc.h> -#include <dt-bindings/power/qcom-aoss-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,apr.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> @@ -273,13 +272,6 @@ reg = <0x0 0x80000000 0x0 0x0>; }; - mmcx_reg: mmcx-reg { - compatible = "regulator-fixed-domain"; - power-domains = <&rpmhpd SM8250_MMCX>; - required-opps = <&rpmhpd_opp_low_svs>; - regulator-name = "MMCX"; - }; - pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; @@ -1463,7 +1455,7 @@ status = "disabled"; - pcie0_lane: lanes@1c06200 { + pcie0_lane: phy@1c06200 { reg = <0 0x1c06200 0 0x170>, /* tx */ <0 0x1c06400 0 0x200>, /* rx */ <0 0x1c06800 0 0x1f0>, /* pcs */ @@ -1567,7 +1559,7 @@ status = "disabled"; - pcie1_lane: lanes@1c0e200 { + pcie1_lane: phy@1c0e200 { reg = <0 0x1c0e200 0 0x170>, /* tx0 */ <0 0x1c0e400 0 0x200>, /* rx0 */ <0 0x1c0ea00 0 0x1f0>, /* pcs */ @@ -1673,7 +1665,7 @@ status = "disabled"; - pcie2_lane: lanes@1c16200 { + pcie2_lane: phy@1c16200 { reg = <0 0x1c16200 0 0x170>, /* tx0 */ <0 0x1c16400 0 0x200>, /* rx0 */ <0 0x1c16a00 0 0x1f0>, /* pcs */ @@ -1750,7 +1742,7 @@ reset-names = "ufsphy"; status = "disabled"; - ufs_mem_phy_lanes: lanes@1d87400 { + ufs_mem_phy_lanes: phy@1d87400 { reg = <0 0x01d87400 0 0x108>, <0 0x01d87600 0 0x1e0>, <0 0x01d87c00 0 0x1dc>, @@ -2088,13 +2080,14 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>, - <&rpmhpd SM8250_LCX>, + power-domains = <&rpmhpd SM8250_LCX>, <&rpmhpd SM8250_LMX>; - power-domain-names = "load_state", "lcx", "lmx"; + power-domain-names = "lcx", "lmx"; memory-region = <&slpi_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&smp2p_slpi_out 0>; qcom,smem-state-names = "stop"; @@ -2154,12 +2147,12 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>, - <&rpmhpd SM8250_CX>; - power-domain-names = "load_state", "cx"; + power-domains = <&rpmhpd SM8250_CX>; memory-region = <&cdsp_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&smp2p_cdsp_out 0>; qcom,smem-state-names = "stop"; @@ -2330,7 +2323,7 @@ <&gcc GCC_USB3_PHY_SEC_BCR>; reset-names = "phy", "common"; - usb_2_ssphy: lanes@88eb200 { + usb_2_ssphy: phy@88eb200 { reg = <0 0x088eb200 0 0x200>, <0 0x088eb400 0 0x200>, <0 0x088eb800 0 0x800>; @@ -2571,7 +2564,8 @@ clocks = <&gcc GCC_VIDEO_AHB_CLK>, <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>; - mmcx-supply = <&mmcx_reg>; + power-domains = <&rpmhpd SM8250_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; clock-names = "iface", "bi_tcxo", "bi_tcxo_ao"; #clock-cells = <1>; #reset-cells = <1>; @@ -2846,7 +2840,8 @@ dispcc: clock-controller@af00000 { compatible = "qcom,sm8250-dispcc"; reg = <0 0x0af00000 0 0x10000>; - mmcx-supply = <&mmcx_reg>; + power-domains = <&rpmhpd SM8250_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&dsi0_phy 0>, <&dsi0_phy 1>, @@ -2900,7 +2895,7 @@ aoss_qmp: power-controller@c300000 { compatible = "qcom,sm8250-aoss-qmp"; - reg = <0 0x0c300000 0 0x100000>; + reg = <0 0x0c300000 0 0x400>; interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>; @@ -2908,7 +2903,11 @@ IPCC_MPROC_SIGNAL_GLINK_QMP>; #clock-cells = <0>; - #power-domain-cells = <1>; + }; + + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; }; spmi_bus: spmi@c440000 { @@ -3825,13 +3824,14 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>, - <&rpmhpd SM8250_LCX>, + power-domains = <&rpmhpd SM8250_LCX>, <&rpmhpd SM8250_LMX>; - power-domain-names = "load_state", "lcx", "lmx"; + power-domain-names = "lcx", "lmx"; memory-region = <&adsp_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&smp2p_adsp_out 0>; qcom,smem-state-names = "stop"; diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts index 56093e260ddf..be062377c936 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts @@ -251,9 +251,7 @@ status = "okay"; vdda-phy-supply = <&vreg_l5b_0p88>; - vdda-max-microamp = <91600>; vdda-pll-supply = <&vreg_l6b_1p2>; - vdda-pll-max-microamp = <19000>; }; &usb_1 { diff --git a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts index bd95009c1875..06eedbe52c42 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts @@ -286,6 +286,10 @@ firmware-name = "qcom/sm8350/modem.mbn"; }; +&pmk8350_rtc { + status = "okay"; +}; + &qupv3_id_0 { status = "okay"; }; @@ -318,9 +322,7 @@ status = "okay"; vdda-phy-supply = <&vreg_l5b_0p88>; - vdda-max-microamp = <91600>; vdda-pll-supply = <&vreg_l6b_1p2>; - vdda-pll-max-microamp = <19000>; }; &usb_1 { diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index e91cd8a5e535..d134280e2939 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -8,7 +8,6 @@ #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interconnect/qcom,sm8350.h> #include <dt-bindings/mailbox/qcom-ipcc.h> -#include <dt-bindings/power/qcom-aoss-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/thermal/thermal.h> @@ -48,6 +47,8 @@ enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; @@ -65,6 +66,8 @@ enable-method = "psci"; next-level-cache = <&L2_100>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; @@ -79,6 +82,8 @@ enable-method = "psci"; next-level-cache = <&L2_200>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; @@ -93,6 +98,8 @@ enable-method = "psci"; next-level-cache = <&L2_300>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; @@ -107,6 +114,8 @@ enable-method = "psci"; next-level-cache = <&L2_400>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; @@ -121,6 +130,8 @@ enable-method = "psci"; next-level-cache = <&L2_500>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; @@ -136,6 +147,8 @@ enable-method = "psci"; next-level-cache = <&L2_600>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; @@ -150,12 +163,86 @@ enable-method = "psci"; next-level-cache = <&L2_700>; qcom,freq-domain = <&cpufreq_hw 2>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; }; }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "silver-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <355>; + exit-latency-us = <909>; + min-residency-us = <3934>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "gold-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <241>; + exit-latency-us = <1461>; + min-residency-us = <4488>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + idle-state-name = "cluster-power-collapse"; + arm,psci-suspend-param = <0x4100c344>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9987>; + local-timer-stop; + }; + }; }; firmware { @@ -179,6 +266,59 @@ psci { compatible = "arm,psci-1.0"; method = "smc"; + + CPU_PD0: cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; }; reserved_memory: reserved-memory { @@ -726,15 +866,16 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>, - <&rpmhpd 0>, + power-domains = <&rpmhpd 0>, <&rpmhpd 12>; - power-domain-names = "load_state", "cx", "mss"; + power-domain-names = "cx", "mss"; interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>; memory-region = <&pil_modem_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&smp2p_modem_out 0>; qcom,smem-state-names = "stop"; @@ -788,13 +929,17 @@ aoss_qmp: power-controller@c300000 { compatible = "qcom,sm8350-aoss-qmp"; - reg = <0 0x0c300000 0 0x100000>; + reg = <0 0x0c300000 0 0x400>; interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>; mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; #clock-cells = <0>; - #power-domain-cells = <1>; + }; + + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; }; spmi_bus: spmi@c440000 { @@ -1070,7 +1215,6 @@ reg = <0 0x01d87000 0 0xe10>; #address-cells = <2>; #size-cells = <2>; - #clock-cells = <1>; ranges; clock-names = "ref", "ref_aux"; @@ -1081,7 +1225,7 @@ reset-names = "ufsphy"; status = "disabled"; - ufs_mem_phy_lanes: lanes@1d87400 { + ufs_mem_phy_lanes: phy@1d87400 { reg = <0 0x01d87400 0 0x108>, <0 0x01d87600 0 0x1e0>, <0 0x01d87c00 0 0x1dc>, @@ -1107,13 +1251,14 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>, - <&rpmhpd 4>, + power-domains = <&rpmhpd 4>, <&rpmhpd 5>; - power-domain-names = "load_state", "lcx", "lmx"; + power-domain-names = "lcx", "lmx"; memory-region = <&pil_slpi_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&smp2p_slpi_out 0>; qcom,smem-state-names = "stop"; @@ -1129,6 +1274,32 @@ label = "slpi"; qcom,remote-pid = <3>; + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "sdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x0541 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x0542 0x0>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x0543 0x0>; + /* note: shared-cb = <4> in downstream */ + }; + }; }; }; @@ -1147,15 +1318,16 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>, - <&rpmhpd 0>, + power-domains = <&rpmhpd 0>, <&rpmhpd 10>; - power-domain-names = "load_state", "cx", "mxc"; + power-domain-names = "cx", "mxc"; interconnects = <&compute_noc MASTER_CDSP_PROC &mc_virt SLAVE_EBI1>; memory-region = <&pil_cdsp_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&smp2p_cdsp_out 0>; qcom,smem-state-names = "stop"; @@ -1170,6 +1342,72 @@ label = "cdsp"; qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x2161 0x0400>, + <&apps_smmu 0x1181 0x0420>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x2162 0x0400>, + <&apps_smmu 0x1182 0x0420>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x2163 0x0400>, + <&apps_smmu 0x1183 0x0420>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x2164 0x0400>, + <&apps_smmu 0x1184 0x0420>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x2165 0x0400>, + <&apps_smmu 0x1185 0x0420>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x2166 0x0400>, + <&apps_smmu 0x1186 0x0420>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x2167 0x0400>, + <&apps_smmu 0x1187 0x0420>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x2168 0x0400>, + <&apps_smmu 0x1188 0x0420>; + }; + + /* note: secure cb9 in downstream */ + }; }; }; @@ -1203,9 +1441,7 @@ compatible = "qcom,sm8350-qmp-usb3-phy"; reg = <0 0x088e9000 0 0x200>, <0 0x088e8000 0 0x20>; - reg-names = "reg-base", "dp_com"; status = "disabled"; - #clock-cells = <1>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -1238,7 +1474,6 @@ compatible = "qcom,sm8350-qmp-usb3-uni-phy"; reg = <0 0x088eb000 0 0x200>; status = "disabled"; - #clock-cells = <1>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -1381,13 +1616,14 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>, - <&rpmhpd 4>, + power-domains = <&rpmhpd 4>, <&rpmhpd 5>; - power-domain-names = "load_state", "lcx", "lmx"; + power-domain-names = "lcx", "lmx"; memory-region = <&pil_adsp_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&smp2p_adsp_out 0>; qcom,smem-state-names = "stop"; @@ -1402,6 +1638,32 @@ label = "lpass"; qcom,remote-pid = <2>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1803 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1804 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1805 0x0>; + }; + }; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 15a53b513966..d1c5c21d8d14 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -71,4 +71,6 @@ dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-salvator-xs.dtb dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb.dtb dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb-kf.dtb +dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-salvator-xs.dtb + dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi index 090dc9c4f57b..0d136809eb96 100644 --- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi @@ -50,6 +50,7 @@ &avb { pinctrl-0 = <&avb_pins>; pinctrl-names = "default"; + phy-mode = "rgmii-rxid"; phy-handle = <&phy0>; rx-internal-delay-ps = <1800>; tx-internal-delay-ps = <2000>; @@ -58,6 +59,8 @@ status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id004d.d074", + "ethernet-phy-ieee802.3-c22"; reg = <0>; interrupt-parent = <&gpio2>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm64/boot/dts/renesas/cat875.dtsi b/arch/arm64/boot/dts/renesas/cat875.dtsi index 801ea54b027c..a69d24e9c61d 100644 --- a/arch/arm64/boot/dts/renesas/cat875.dtsi +++ b/arch/arm64/boot/dts/renesas/cat875.dtsi @@ -21,6 +21,8 @@ status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id001c.c915", + "ethernet-phy-ieee802.3-c22"; reg = <0>; interrupt-parent = <&gpio2>; interrupts = <21 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm64/boot/dts/renesas/draak.dtsi b/arch/arm64/boot/dts/renesas/draak.dtsi new file mode 100644 index 000000000000..eb0327c0df48 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/draak.dtsi @@ -0,0 +1,686 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Draak board + * + * Copyright (C) 2016-2018 Renesas Electronics Corp. + * Copyright (C) 2017 Glider bvba + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Renesas Draak board"; + compatible = "renesas,draak"; + + aliases { + serial0 = &scif2; + ethernet0 = &avb; + }; + + audio_clkout: audio-clkout { + /* + * This is same as <&rcar_sound 0> + * but needed to avoid cs2000/rcar_sound probe dead-lock + */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12288000>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 50000>; + + brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>; + default-brightness-level = <10>; + + power-supply = <®_12p0v>; + enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; + stdout-path = "serial0:115200n8"; + }; + + composite-in { + compatible = "composite-video-connector"; + + port { + composite_con_in: endpoint { + remote-endpoint = <&adv7180_in>; + }; + }; + }; + + hdmi-in { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&adv7612_in>; + }; + }; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_out: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&keys_pins>; + pinctrl-names = "default"; + + key-1 { + gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; + linux,code = <KEY_1>; + label = "SW56-1"; + wakeup-source; + debounce-interval = <20>; + }; + key-2 { + gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; + linux,code = <KEY_2>; + label = "SW56-2"; + wakeup-source; + debounce-interval = <20>; + }; + key-3 { + gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; + linux,code = <KEY_3>; + label = "SW56-3"; + wakeup-source; + debounce-interval = <20>; + }; + key-4 { + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; + linux,code = <KEY_4>; + label = "SW56-4"; + wakeup-source; + debounce-interval = <20>; + }; + }; + + lvds-decoder { + compatible = "thine,thc63lvd1024"; + vcc-supply = <®_3p3v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + thc63lvd1024_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@2 { + reg = <2>; + thc63lvd1024_out: endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x18000000>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_12p0v: regulator-12p0v { + compatible = "regulator-fixed"; + regulator-name = "D12.0V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-boot-on; + regulator-always-on; + }; + + sound_card: sound { + compatible = "audio-graph-card"; + + dais = <&rsnd_port0 /* ak4613 */ + /* HDMI is not yet supported */ + >; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_in: endpoint { + remote-endpoint = <&adv7123_out>; + }; + }; + }; + + vga-encoder { + compatible = "adi,adv7123"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7123_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + port@1 { + reg = <1>; + adv7123_out: endpoint { + remote-endpoint = <&vga_in>; + }; + }; + }; + }; + + x12_clk: x12 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; + }; + + x19_clk: x19 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; +}; + +&audio_clk_b { + /* + * X11 is connected to VI4_FIELD/SCIF_CLK/AUDIO_CLKB, + * and R-Car Sound uses AUDIO_CLKB. + * Note is that schematic indicates VI4_FIELD conection only + * not AUDIO_CLKB at SoC page. + * And this VI4_FIELD/SCIF_CLK/AUDIO_CLKB is connected to SW60. + * SW60 should be 1-2. + */ + + clock-frequency = <22579200>; +}; + +&avb { + pinctrl-0 = <&avb0_pins>; + pinctrl-names = "default"; + renesas,no-ether-link; + phy-handle = <&phy0>; + status = "okay"; + + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio5>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio5 18 GPIO_ACTIVE_LOW>; + /* + * TX clock internal delay mode is required for reliable + * 1Gbps communication using the KSZ9031RNX phy present on + * the Draak board, however, TX clock internal delay mode + * isn't supported on R-Car D3(e). Thus, limit speed to + * 100Mbps for reliable communication. + */ + max-speed = <100>; + }; +}; + +&can0 { + pinctrl-0 = <&can0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&can1 { + pinctrl-0 = <&can1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&x12_clk>; + clock-names = "du.0", "du.1", "dclkin.0"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7123_in>; + }; + }; + }; +}; + +&ehci0 { + dr_mode = "host"; + status = "okay"; +}; + +&extal_clk { + clock-frequency = <48000000>; +}; + +&hsusb { + dr_mode = "host"; + status = "okay"; +}; + +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "okay"; + + ak4613: codec@10 { + compatible = "asahi-kasei,ak4613"; + #sound-dai-cells = <0>; + reg = <0x10>; + clocks = <&rcar_sound 0>; /* audio_clkout */ + + asahi-kasei,in1-single-end; + asahi-kasei,in2-single-end; + asahi-kasei,out1-single-end; + asahi-kasei,out2-single-end; + asahi-kasei,out3-single-end; + asahi-kasei,out4-single-end; + asahi-kasei,out5-single-end; + asahi-kasei,out6-single-end; + + port { + ak4613_endpoint: endpoint { + remote-endpoint = <&rsnd_for_ak4613>; + }; + }; + }; + + composite-in@20 { + compatible = "adi,adv7180cp"; + reg = <0x20>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7180_in: endpoint { + remote-endpoint = <&composite_con_in>; + }; + }; + + port@3 { + reg = <3>; + + /* + * The VIN4 video input path is shared between + * CVBS and HDMI inputs through SW[49-53] + * switches. + * + * CVBS is the default selection, link it to + * VIN4 here. + */ + adv7180_out: endpoint { + remote-endpoint = <&vin4_in>; + }; + }; + }; + + }; + + hdmi-encoder@39 { + compatible = "adi,adv7511w"; + reg = <0x39>, <0x3f>, <0x3c>, <0x38>; + reg-names = "main", "edid", "cec", "packet"; + interrupt-parent = <&gpio1>; + interrupts = <28 IRQ_TYPE_LEVEL_LOW>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&thc63lvd1024_out>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; + + hdmi-decoder@4c { + compatible = "adi,adv7612"; + reg = <0x4c>; + default-input = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adv7612_in: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + + port@2 { + reg = <2>; + + /* + * The VIN4 video input path is shared between + * CVBS and HDMI inputs through SW[49-53] + * switches. + * + * CVBS is the default selection, leave HDMI + * not connected here. + */ + adv7612_out: endpoint { + pclk-sample = <0>; + hsync-active = <0>; + vsync-active = <0>; + }; + }; + }; + }; + + cs2000: clk-multiplier@4f { + #clock-cells = <0>; + compatible = "cirrus,cs2000-cp"; + reg = <0x4f>; + clocks = <&audio_clkout>, <&x19_clk>; /* audio_clkout_1, x19 */ + clock-names = "clk_in", "ref_clk"; + + assigned-clocks = <&cs2000>; + assigned-clock-rates = <24576000>; /* 1/1 divide */ + }; + + eeprom@50 { + compatible = "rohm,br24t01", "atmel,24c01"; + reg = <0x50>; + pagesize = <8>; + }; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&lvds0 { + status = "okay"; + + clocks = <&cpg CPG_MOD 727>, + <&x12_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; + + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&thc63lvd1024_in>; + }; + }; + }; +}; + +&lvds1 { + /* + * Even though the LVDS1 output is not connected, the encoder must be + * enabled to supply a pixel clock to the DU for the DPAD output when + * LVDS0 is in use. + */ + status = "okay"; + + clocks = <&cpg CPG_MOD 727>, + <&x12_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; +}; + +&ohci0 { + dr_mode = "host"; + status = "okay"; +}; + +&pfc { + avb0_pins: avb { + groups = "avb0_link", "avb0_mdio", "avb0_mii"; + function = "avb0"; + }; + + can0_pins: can0 { + groups = "can0_data_a"; + function = "can0"; + }; + + can1_pins: can1 { + groups = "can1_data_a"; + function = "can1"; + }; + + du_pins: du { + groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; + function = "du"; + }; + + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + + i2c1_pins: i2c1 { + groups = "i2c1"; + function = "i2c1"; + }; + + keys_pins: keys { + pins = "GP_4_12", "GP_4_13", "GP_4_14", "GP_4_15"; + bias-pull-up; + }; + + pwm0_pins: pwm0 { + groups = "pwm0_c"; + function = "pwm0"; + }; + + pwm1_pins: pwm1 { + groups = "pwm1_c"; + function = "pwm1"; + }; + + scif2_pins: scif2 { + groups = "scif2_data"; + function = "scif2"; + }; + + sdhi2_pins: sd2 { + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; + power-source = <1800>; + }; + + sdhi2_pins_uhs: sd2_uhs { + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; + power-source = <1800>; + }; + + sound_pins: sound { + groups = "ssi34_ctrl", "ssi3_data", "ssi4_data_a"; + function = "ssi"; + }; + + sound_clk_pins: sound-clk { + groups = "audio_clk_a", "audio_clk_b", + "audio_clkout", "audio_clkout1"; + function = "audio_clk"; + }; + + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; + + vin4_pins_cvbs: vin4 { + groups = "vin4_data8", "vin4_sync", "vin4_clk"; + function = "vin4"; + }; +}; + +&pwm0 { + pinctrl-0 = <&pwm0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pwm1 { + pinctrl-0 = <&pwm1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&rcar_sound { + pinctrl-0 = <&sound_pins>, <&sound_clk_pins>; + pinctrl-names = "default"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + /* audio_clkout0/1 */ + #clock-cells = <1>; + clock-frequency = <12288000 11289600>; + + status = "okay"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1011>, <&cpg CPG_MOD 1012>, + <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&cs2000>, <&audio_clk_b>, + <&cpg CPG_CORE R8A77995_CLK_ZA2>; + + ports { + rsnd_port0: port { + rsnd_for_ak4613: endpoint { + remote-endpoint = <&ak4613_endpoint>; + dai-format = "left_j"; + bitclock-master = <&rsnd_for_ak4613>; + frame-master = <&rsnd_for_ak4613>; + playback = <&ssi3>, <&src5>, <&dvc0>; + capture = <&ssi4>, <&src6>, <&dvc1>; + }; + }; + }; +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + +&scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&sdhi2 { + /* used for on-board eMMC */ + pinctrl-0 = <&sdhi2_pins>; + pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + mmc-hs200-1_8v; + no-sd; + no-sdio; + non-removable; + status = "okay"; +}; + +&ssi4 { + shared-pin; +}; + +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + renesas,no-otg-pins; + status = "okay"; +}; + +&vin4 { + pinctrl-0 = <&vin4_pins_cvbs>; + pinctrl-names = "default"; + + status = "okay"; + + ports { + port { + vin4_in: endpoint { + remote-endpoint = <&adv7180_out>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/ebisu.dtsi b/arch/arm64/boot/dts/renesas/ebisu.dtsi new file mode 100644 index 000000000000..67231c8576c5 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/ebisu.dtsi @@ -0,0 +1,803 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Ebisu board + * + * Copyright (C) 2018 Renesas Electronics Corp. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Renesas Ebisu board"; + compatible = "renesas,ebisu"; + + aliases { + serial0 = &scif2; + ethernet0 = &avb; + mmc0 = &sdhi3; + mmc1 = &sdhi0; + mmc2 = &sdhi1; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; + stdout-path = "serial0:115200n8"; + }; + + audio_clkout: audio-clkout { + /* + * This is same as <&rcar_sound 0> + * but needed to avoid cs2000/rcar_sound probe dead-lock + */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 50000>; + + brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>; + default-brightness-level = <10>; + + power-supply = <®_12p0v>; + }; + + cvbs-in { + compatible = "composite-video-connector"; + label = "CVBS IN"; + + port { + cvbs_con: endpoint { + remote-endpoint = <&adv7482_ain7>; + }; + }; + }; + + hdmi-in { + compatible = "hdmi-connector"; + label = "HDMI IN"; + type = "a"; + + port { + hdmi_in_con: endpoint { + remote-endpoint = <&adv7482_hdmi>; + }; + }; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_out: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&keys_pins>; + pinctrl-names = "default"; + + key-1 { + gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; + linux,code = <KEY_1>; + label = "SW4-1"; + wakeup-source; + debounce-interval = <20>; + }; + key-2 { + gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; + linux,code = <KEY_2>; + label = "SW4-2"; + wakeup-source; + debounce-interval = <20>; + }; + key-3 { + gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; + linux,code = <KEY_3>; + label = "SW4-3"; + wakeup-source; + debounce-interval = <20>; + }; + key-4 { + gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + linux,code = <KEY_4>; + label = "SW4-4"; + wakeup-source; + debounce-interval = <20>; + }; + }; + + lvds-decoder { + compatible = "thine,thc63lvd1024"; + vcc-supply = <®_3p3v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + thc63lvd1024_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@2 { + reg = <2>; + thc63lvd1024_out: endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; + }; + + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_12p0v: regulator2 { + compatible = "regulator-fixed"; + regulator-name = "D12.0V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-boot-on; + regulator-always-on; + }; + + rsnd_ak4613: sound { + compatible = "simple-audio-card"; + + simple-audio-card,name = "rsnd-ak4613"; + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&sndcpu>; + simple-audio-card,frame-master = <&sndcpu>; + + sndcodec: simple-audio-card,codec { + sound-dai = <&ak4613>; + }; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + }; + + vbus0_usb2: regulator-vbus0-usb2 { + compatible = "regulator-fixed"; + + regulator-name = "USB20_VBUS_CN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vcc_sdhi0: regulator-vcc-sdhi0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1>, <1800000 0>; + }; + + vcc_sdhi1: regulator-vcc-sdhi1 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI1 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi1: regulator-vccq-sdhi1 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI1 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1>, <1800000 0>; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_in: endpoint { + remote-endpoint = <&adv7123_out>; + }; + }; + }; + + vga-encoder { + compatible = "adi,adv7123"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7123_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + port@1 { + reg = <1>; + adv7123_out: endpoint { + remote-endpoint = <&vga_in>; + }; + }; + }; + }; + + x12_clk: x12 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + x13_clk: x13 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; + }; +}; + +&audio_clk_a { + clock-frequency = <22579200>; +}; + +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + phy-handle = <&phy0>; + status = "okay"; + + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + /* + * TX clock internal delay mode is required for reliable + * 1Gbps communication using the KSZ9031RNX phy present on + * the Ebisu board, however, TX clock internal delay mode + * isn't supported on R-Car E3(e). Thus, limit speed to + * 100Mbps for reliable communication. + */ + max-speed = <100>; + }; +}; + +&canfd { + pinctrl-0 = <&canfd0_pins>; + pinctrl-names = "default"; + status = "okay"; + + channel0 { + status = "okay"; + }; +}; + +&csi40 { + status = "okay"; + + ports { + port@0 { + csi40_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2>; + remote-endpoint = <&adv7482_txa>; + }; + }; + }; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&x13_clk>; + clock-names = "du.0", "du.1", "dclkin.0"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7123_in>; + }; + }; + }; +}; + +&ehci0 { + dr_mode = "otg"; + status = "okay"; +}; + +&extal_clk { + clock-frequency = <48000000>; +}; + +&hsusb { + dr_mode = "otg"; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + io_expander: gpio@20 { + compatible = "onnn,pca9654"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio2>; + interrupts = <22 IRQ_TYPE_LEVEL_LOW>; + }; + + hdmi-encoder@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio1>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&thc63lvd1024_out>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; + + video-receiver@70 { + compatible = "adi,adv7482"; + reg = <0x70>; + + interrupt-parent = <&gpio0>; + interrupt-names = "intrq1", "intrq2"; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>, + <17 IRQ_TYPE_LEVEL_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; + + adv7482_ain7: endpoint { + remote-endpoint = <&cvbs_con>; + }; + }; + + port@8 { + reg = <8>; + + adv7482_hdmi: endpoint { + remote-endpoint = <&hdmi_in_con>; + }; + }; + + port@a { + reg = <10>; + + adv7482_txa: endpoint { + clock-lanes = <0>; + data-lanes = <1 2>; + remote-endpoint = <&csi40_in>; + }; + }; + }; + }; +}; + +&i2c3 { + status = "okay"; + + ak4613: codec@10 { + compatible = "asahi-kasei,ak4613"; + #sound-dai-cells = <0>; + reg = <0x10>; + clocks = <&rcar_sound 3>; + + asahi-kasei,in1-single-end; + asahi-kasei,in2-single-end; + asahi-kasei,out1-single-end; + asahi-kasei,out2-single-end; + asahi-kasei,out3-single-end; + asahi-kasei,out4-single-end; + asahi-kasei,out5-single-end; + asahi-kasei,out6-single-end; + }; + + cs2000: clk-multiplier@4f { + #clock-cells = <0>; + compatible = "cirrus,cs2000-cp"; + reg = <0x4f>; + clocks = <&audio_clkout>, <&x12_clk>; + clock-names = "clk_in", "ref_clk"; + + assigned-clocks = <&cs2000>; + assigned-clock-rates = <24576000>; /* 1/1 divide */ + }; +}; + +&i2c_dvfs { + status = "okay"; + + clock-frequency = <400000>; + + pmic: pmic@30 { + pinctrl-0 = <&irq0_pins>; + pinctrl-names = "default"; + + compatible = "rohm,bd9571mwv"; + reg = <0x30>; + interrupt-parent = <&intc_ex>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + rohm,ddr-backup-power = <0x1>; + rohm,rstbmode-level; + }; + + eeprom@50 { + compatible = "rohm,br24t01", "atmel,24c01"; + reg = <0x50>; + pagesize = <8>; + }; +}; + +&lvds0 { + status = "okay"; + + clocks = <&cpg CPG_MOD 727>, + <&x13_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; + + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&thc63lvd1024_in>; + }; + }; + }; +}; + +&lvds1 { + /* + * Even though the LVDS1 output is not connected, the encoder must be + * enabled to supply a pixel clock to the DU for the DPAD output when + * LVDS0 is in use. + */ + status = "okay"; + + clocks = <&cpg CPG_MOD 727>, + <&x13_clk>, + <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; +}; + +&ohci0 { + dr_mode = "otg"; + status = "okay"; +}; + +&pcie_bus_clk { + clock-frequency = <100000000>; +}; + +&pciec0 { + status = "okay"; +}; + +&pfc { + avb_pins: avb { + groups = "avb_link", "avb_mii"; + function = "avb"; + }; + + canfd0_pins: canfd0 { + groups = "canfd0_data"; + function = "canfd0"; + }; + + du_pins: du { + groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; + function = "du"; + }; + + irq0_pins: irq0 { + groups = "intc_ex_irq0"; + function = "intc_ex"; + }; + + keys_pins: keys { + pins = "GP_5_10", "GP_5_11", "GP_5_12", "GP_5_13"; + bias-pull-up; + }; + + pwm3_pins: pwm3 { + groups = "pwm3_b"; + function = "pwm3"; + }; + + pwm5_pins: pwm5 { + groups = "pwm5_a"; + function = "pwm5"; + }; + + scif2_pins: scif2 { + groups = "scif2_data_a"; + function = "scif2"; + }; + + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; + }; + + sdhi1_pins: sd1 { + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; + power-source = <3300>; + }; + + sdhi1_pins_uhs: sd1_uhs { + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; + power-source = <1800>; + }; + + sdhi3_pins: sd3 { + groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds"; + function = "sdhi3"; + power-source = <1800>; + }; + + sound_clk_pins: sound_clk { + groups = "audio_clk_a", "audio_clk_b_a", "audio_clk_c_a", + "audio_clkout_a", "audio_clkout1_a"; + function = "audio_clk"; + }; + + sound_pins: sound { + groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data"; + function = "ssi"; + }; + + usb0_pins: usb { + groups = "usb0_b", "usb0_id"; + function = "usb0"; + }; + + usb30_pins: usb30 { + groups = "usb30"; + function = "usb30"; + }; +}; + +&pwm3 { + pinctrl-0 = <&pwm3_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pwm5 { + pinctrl-0 = <&pwm5_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&rcar_sound { + pinctrl-0 = <&sound_pins>, <&sound_clk_pins>; + pinctrl-names = "default"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + /* audio_clkout0/1/2/3 */ + #clock-cells = <1>; + clock-frequency = <12288000 11289600>; + + status = "okay"; + + /* update <audio_clk_b> to <cs2000> */ + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&cs2000>, <&audio_clk_c>, + <&cpg CPG_CORE R8A77990_CLK_ZA2>; + + rcar_sound,dai { + dai0 { + playback = <&ssi0>, <&src0>, <&dvc0>; + capture = <&ssi1>, <&src1>, <&dvc1>; + }; + }; + +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + +&scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&sdhi1 { + pinctrl-0 = <&sdhi1_pins>; + pinctrl-1 = <&sdhi1_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi1>; + vqmmc-supply = <&vccq_sdhi1>; + cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&sdhi3 { + /* used for on-board 8bit eMMC */ + pinctrl-0 = <&sdhi3_pins>; + pinctrl-1 = <&sdhi3_pins>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + full-pwr-cycle-in-suspend; + status = "okay"; +}; + +&ssi1 { + shared-pin; +}; + +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + vbus-supply = <&vbus0_usb2>; + status = "okay"; +}; + +&usb3_peri0 { + companion = <&xhci0>; + status = "okay"; +}; + +&vin4 { + status = "okay"; +}; + +&vin5 { + status = "okay"; +}; + +&xhci0 { + pinctrl-0 = <&usb30_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi index dde3a07bc417..ad898c6db4e6 100644 --- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi @@ -24,6 +24,8 @@ status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id001c.c915", + "ethernet-phy-ieee802.3-c22"; reg = <0>; interrupt-parent = <&gpio2>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi index 041473aa5cd0..86d59e7e1a87 100644 --- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi @@ -1392,6 +1392,17 @@ status = "disabled"; }; + tpu: pwm@e6e80000 { + compatible = "renesas,tpu-r8a77961", "renesas,tpu"; + reg = <0 0xe6e80000 0 0x148>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 304>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 304>; + #pwm-cells = <3>; + status = "disabled"; + }; + msiof0: spi@e6e90000 { compatible = "renesas,msiof-r8a77961", "renesas,rcar-gen3-msiof"; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index d24da54f312b..b579d3189a93 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "r8a77970.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Renesas Eagle board based on r8a77970"; @@ -92,10 +93,13 @@ status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio1>; interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts index 2426e533128c..39f3e6cbba3d 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "r8a77970.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Renesas V3M Starter Kit board"; @@ -107,10 +108,13 @@ status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio1>; interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts index edf7f2a2f958..3d6d10c82f48 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "r8a77980.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Renesas Condor board based on r8a77980"; @@ -132,10 +133,13 @@ status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio4>; interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts index 7838dcee3136..1d09d8867651 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "r8a77980.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Renesas V3H Starter Kit board"; @@ -113,9 +114,12 @@ status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; reg = <0>; interrupt-parent = <&gpio4>; interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts index 9c7146084ea1..9da0fd08f8c4 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts @@ -7,795 +7,9 @@ /dts-v1/; #include "r8a77990.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> +#include "ebisu.dtsi" / { model = "Renesas Ebisu board based on r8a77990"; compatible = "renesas,ebisu", "renesas,r8a77990"; - - aliases { - serial0 = &scif2; - ethernet0 = &avb; - mmc0 = &sdhi3; - mmc1 = &sdhi0; - mmc2 = &sdhi1; - }; - - chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; - stdout-path = "serial0:115200n8"; - }; - - audio_clkout: audio-clkout { - /* - * This is same as <&rcar_sound 0> - * but needed to avoid cs2000/rcar_sound probe dead-lock - */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <11289600>; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm3 0 50000>; - - brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>; - default-brightness-level = <10>; - - power-supply = <®_12p0v>; - }; - - cvbs-in { - compatible = "composite-video-connector"; - label = "CVBS IN"; - - port { - cvbs_con: endpoint { - remote-endpoint = <&adv7482_ain7>; - }; - }; - }; - - hdmi-in { - compatible = "hdmi-connector"; - label = "HDMI IN"; - type = "a"; - - port { - hdmi_in_con: endpoint { - remote-endpoint = <&adv7482_hdmi>; - }; - }; - }; - - hdmi-out { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_out: endpoint { - remote-endpoint = <&adv7511_out>; - }; - }; - }; - - keys { - compatible = "gpio-keys"; - - pinctrl-0 = <&keys_pins>; - pinctrl-names = "default"; - - key-1 { - gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; - linux,code = <KEY_1>; - label = "SW4-1"; - wakeup-source; - debounce-interval = <20>; - }; - key-2 { - gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; - linux,code = <KEY_2>; - label = "SW4-2"; - wakeup-source; - debounce-interval = <20>; - }; - key-3 { - gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; - linux,code = <KEY_3>; - label = "SW4-3"; - wakeup-source; - debounce-interval = <20>; - }; - key-4 { - gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; - linux,code = <KEY_4>; - label = "SW4-4"; - wakeup-source; - debounce-interval = <20>; - }; - }; - - lvds-decoder { - compatible = "thine,thc63lvd1024"; - vcc-supply = <®_3p3v>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - thc63lvd1024_in: endpoint { - remote-endpoint = <&lvds0_out>; - }; - }; - - port@2 { - reg = <2>; - thc63lvd1024_out: endpoint { - remote-endpoint = <&adv7511_in>; - }; - }; - }; - }; - - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0x0 0x48000000 0x0 0x38000000>; - }; - - reg_1p8v: regulator0 { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_3p3v: regulator1 { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_12p0v: regulator2 { - compatible = "regulator-fixed"; - regulator-name = "D12.0V"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-boot-on; - regulator-always-on; - }; - - rsnd_ak4613: sound { - compatible = "simple-audio-card"; - - simple-audio-card,name = "rsnd-ak4613"; - simple-audio-card,format = "left_j"; - simple-audio-card,bitclock-master = <&sndcpu>; - simple-audio-card,frame-master = <&sndcpu>; - - sndcodec: simple-audio-card,codec { - sound-dai = <&ak4613>; - }; - - sndcpu: simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - }; - - vbus0_usb2: regulator-vbus0-usb2 { - compatible = "regulator-fixed"; - - regulator-name = "USB20_VBUS_CN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vcc_sdhi0: regulator-vcc-sdhi0 { - compatible = "regulator-fixed"; - - regulator-name = "SDHI0 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vccq_sdhi0: regulator-vccq-sdhi0 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI0 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>; - gpios-states = <1>; - states = <3300000 1>, <1800000 0>; - }; - - vcc_sdhi1: regulator-vcc-sdhi1 { - compatible = "regulator-fixed"; - - regulator-name = "SDHI1 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vccq_sdhi1: regulator-vccq-sdhi1 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI1 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; - gpios-states = <1>; - states = <3300000 1>, <1800000 0>; - }; - - vga { - compatible = "vga-connector"; - - port { - vga_in: endpoint { - remote-endpoint = <&adv7123_out>; - }; - }; - }; - - vga-encoder { - compatible = "adi,adv7123"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7123_in: endpoint { - remote-endpoint = <&du_out_rgb>; - }; - }; - port@1 { - reg = <1>; - adv7123_out: endpoint { - remote-endpoint = <&vga_in>; - }; - }; - }; - }; - - x12_clk: x12 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24576000>; - }; - - x13_clk: x13 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <74250000>; - }; -}; - -&audio_clk_a { - clock-frequency = <22579200>; -}; - -&avb { - pinctrl-0 = <&avb_pins>; - pinctrl-names = "default"; - phy-handle = <&phy0>; - status = "okay"; - - phy0: ethernet-phy@0 { - rxc-skew-ps = <1500>; - reg = <0>; - interrupt-parent = <&gpio2>; - interrupts = <21 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; - /* - * TX clock internal delay mode is required for reliable - * 1Gbps communication using the KSZ9031RNX phy present on - * the Ebisu board, however, TX clock internal delay mode - * isn't supported on r8a77990. Thus, limit speed to - * 100Mbps for reliable communication. - */ - max-speed = <100>; - }; -}; - -&canfd { - pinctrl-0 = <&canfd0_pins>; - pinctrl-names = "default"; - status = "okay"; - - channel0 { - status = "okay"; - }; -}; - -&csi40 { - status = "okay"; - - ports { - port@0 { - csi40_in: endpoint { - clock-lanes = <0>; - data-lanes = <1 2>; - remote-endpoint = <&adv7482_txa>; - }; - }; - }; -}; - -&du { - pinctrl-0 = <&du_pins>; - pinctrl-names = "default"; - status = "okay"; - - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&x13_clk>; - clock-names = "du.0", "du.1", "dclkin.0"; - - ports { - port@0 { - endpoint { - remote-endpoint = <&adv7123_in>; - }; - }; - }; -}; - -&ehci0 { - dr_mode = "otg"; - status = "okay"; -}; - -&extal_clk { - clock-frequency = <48000000>; -}; - -&hsusb { - dr_mode = "otg"; - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - io_expander: gpio@20 { - compatible = "onnn,pca9654"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - interrupt-parent = <&gpio2>; - interrupts = <22 IRQ_TYPE_LEVEL_LOW>; - }; - - hdmi-encoder@39 { - compatible = "adi,adv7511w"; - reg = <0x39>; - interrupt-parent = <&gpio1>; - interrupts = <1 IRQ_TYPE_LEVEL_LOW>; - - adi,input-depth = <8>; - adi,input-colorspace = "rgb"; - adi,input-clock = "1x"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7511_in: endpoint { - remote-endpoint = <&thc63lvd1024_out>; - }; - }; - - port@1 { - reg = <1>; - adv7511_out: endpoint { - remote-endpoint = <&hdmi_con_out>; - }; - }; - }; - }; - - video-receiver@70 { - compatible = "adi,adv7482"; - reg = <0x70>; - - #address-cells = <1>; - #size-cells = <0>; - - interrupt-parent = <&gpio0>; - interrupt-names = "intrq1", "intrq2"; - interrupts = <7 IRQ_TYPE_LEVEL_LOW>, - <17 IRQ_TYPE_LEVEL_LOW>; - - port@7 { - reg = <7>; - - adv7482_ain7: endpoint { - remote-endpoint = <&cvbs_con>; - }; - }; - - port@8 { - reg = <8>; - - adv7482_hdmi: endpoint { - remote-endpoint = <&hdmi_in_con>; - }; - }; - - port@a { - reg = <10>; - - adv7482_txa: endpoint { - clock-lanes = <0>; - data-lanes = <1 2>; - remote-endpoint = <&csi40_in>; - }; - }; - }; -}; - -&i2c3 { - status = "okay"; - - ak4613: codec@10 { - compatible = "asahi-kasei,ak4613"; - #sound-dai-cells = <0>; - reg = <0x10>; - clocks = <&rcar_sound 3>; - - asahi-kasei,in1-single-end; - asahi-kasei,in2-single-end; - asahi-kasei,out1-single-end; - asahi-kasei,out2-single-end; - asahi-kasei,out3-single-end; - asahi-kasei,out4-single-end; - asahi-kasei,out5-single-end; - asahi-kasei,out6-single-end; - }; - - cs2000: clk-multiplier@4f { - #clock-cells = <0>; - compatible = "cirrus,cs2000-cp"; - reg = <0x4f>; - clocks = <&audio_clkout>, <&x12_clk>; - clock-names = "clk_in", "ref_clk"; - - assigned-clocks = <&cs2000>; - assigned-clock-rates = <24576000>; /* 1/1 divide */ - }; -}; - -&i2c_dvfs { - status = "okay"; - - clock-frequency = <400000>; - - pmic: pmic@30 { - pinctrl-0 = <&irq0_pins>; - pinctrl-names = "default"; - - compatible = "rohm,bd9571mwv"; - reg = <0x30>; - interrupt-parent = <&intc_ex>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - rohm,ddr-backup-power = <0x1>; - rohm,rstbmode-level; - }; - - eeprom@50 { - compatible = "rohm,br24t01", "atmel,24c01"; - reg = <0x50>; - pagesize = <8>; - }; -}; - -&lvds0 { - status = "okay"; - - clocks = <&cpg CPG_MOD 727>, - <&x13_clk>, - <&extal_clk>; - clock-names = "fck", "dclkin.0", "extal"; - - ports { - port@1 { - lvds0_out: endpoint { - remote-endpoint = <&thc63lvd1024_in>; - }; - }; - }; -}; - -&lvds1 { - /* - * Even though the LVDS1 output is not connected, the encoder must be - * enabled to supply a pixel clock to the DU for the DPAD output when - * LVDS0 is in use. - */ - status = "okay"; - - clocks = <&cpg CPG_MOD 727>, - <&x13_clk>, - <&extal_clk>; - clock-names = "fck", "dclkin.0", "extal"; -}; - -&ohci0 { - dr_mode = "otg"; - status = "okay"; -}; - -&pcie_bus_clk { - clock-frequency = <100000000>; -}; - -&pciec0 { - status = "okay"; -}; - -&pfc { - avb_pins: avb { - groups = "avb_link", "avb_mii"; - function = "avb"; - }; - - canfd0_pins: canfd0 { - groups = "canfd0_data"; - function = "canfd0"; - }; - - du_pins: du { - groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; - function = "du"; - }; - - irq0_pins: irq0 { - groups = "intc_ex_irq0"; - function = "intc_ex"; - }; - - keys_pins: keys { - pins = "GP_5_10", "GP_5_11", "GP_5_12", "GP_5_13"; - bias-pull-up; - }; - - pwm3_pins: pwm3 { - groups = "pwm3_b"; - function = "pwm3"; - }; - - pwm5_pins: pwm5 { - groups = "pwm5_a"; - function = "pwm5"; - }; - - scif2_pins: scif2 { - groups = "scif2_data_a"; - function = "scif2"; - }; - - sdhi0_pins: sd0 { - groups = "sdhi0_data4", "sdhi0_ctrl"; - function = "sdhi0"; - power-source = <3300>; - }; - - sdhi0_pins_uhs: sd0_uhs { - groups = "sdhi0_data4", "sdhi0_ctrl"; - function = "sdhi0"; - power-source = <1800>; - }; - - sdhi1_pins: sd1 { - groups = "sdhi1_data4", "sdhi1_ctrl"; - function = "sdhi1"; - power-source = <3300>; - }; - - sdhi1_pins_uhs: sd1_uhs { - groups = "sdhi1_data4", "sdhi1_ctrl"; - function = "sdhi1"; - power-source = <1800>; - }; - - sdhi3_pins: sd3 { - groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds"; - function = "sdhi3"; - power-source = <1800>; - }; - - sound_clk_pins: sound_clk { - groups = "audio_clk_a", "audio_clk_b_a", "audio_clk_c_a", - "audio_clkout_a", "audio_clkout1_a"; - function = "audio_clk"; - }; - - sound_pins: sound { - groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data"; - function = "ssi"; - }; - - usb0_pins: usb { - groups = "usb0_b", "usb0_id"; - function = "usb0"; - }; - - usb30_pins: usb30 { - groups = "usb30"; - function = "usb30"; - }; -}; - -&pwm3 { - pinctrl-0 = <&pwm3_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&pwm5 { - pinctrl-0 = <&pwm5_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&rcar_sound { - pinctrl-0 = <&sound_pins>, <&sound_clk_pins>; - pinctrl-names = "default"; - - /* Single DAI */ - #sound-dai-cells = <0>; - - /* audio_clkout0/1/2/3 */ - #clock-cells = <1>; - clock-frequency = <12288000 11289600>; - - status = "okay"; - - /* update <audio_clk_b> to <cs2000> */ - clocks = <&cpg CPG_MOD 1005>, - <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, - <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, - <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, - <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, - <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, - <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, - <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, - <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, - <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, - <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, - <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, - <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, - <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, - <&audio_clk_a>, <&cs2000>, <&audio_clk_c>, - <&cpg CPG_CORE R8A77990_CLK_ZA2>; - - rcar_sound,dai { - dai0 { - playback = <&ssi0>, <&src0>, <&dvc0>; - capture = <&ssi1>, <&src1>, <&dvc1>; - }; - }; - -}; - -&rwdt { - timeout-sec = <60>; - status = "okay"; -}; - -&scif2 { - pinctrl-0 = <&scif2_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&sdhi0 { - pinctrl-0 = <&sdhi0_pins>; - pinctrl-1 = <&sdhi0_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <&vcc_sdhi0>; - vqmmc-supply = <&vccq_sdhi0>; - cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; - bus-width = <4>; - sd-uhs-sdr50; - sd-uhs-sdr104; - status = "okay"; -}; - -&sdhi1 { - pinctrl-0 = <&sdhi1_pins>; - pinctrl-1 = <&sdhi1_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <&vcc_sdhi1>; - vqmmc-supply = <&vccq_sdhi1>; - cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>; - bus-width = <4>; - sd-uhs-sdr50; - sd-uhs-sdr104; - status = "okay"; -}; - -&sdhi3 { - /* used for on-board 8bit eMMC */ - pinctrl-0 = <&sdhi3_pins>; - pinctrl-1 = <&sdhi3_pins>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <®_3p3v>; - vqmmc-supply = <®_1p8v>; - mmc-hs200-1_8v; - mmc-hs400-1_8v; - bus-width = <8>; - no-sd; - no-sdio; - non-removable; - full-pwr-cycle-in-suspend; - status = "okay"; -}; - -&ssi1 { - shared-pin; -}; - -&usb2_phy0 { - pinctrl-0 = <&usb0_pins>; - pinctrl-names = "default"; - - vbus-supply = <&vbus0_usb2>; - status = "okay"; -}; - -&usb3_peri0 { - companion = <&xhci0>; - status = "okay"; -}; - -&vin4 { - status = "okay"; -}; - -&vin5 { - status = "okay"; -}; - -&xhci0 { - pinctrl-0 = <&usb30_pins>; - pinctrl-names = "default"; - - status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index 1ac15aa05b82..384825617fcf 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts @@ -8,678 +8,9 @@ /dts-v1/; #include "r8a77995.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> +#include "draak.dtsi" / { model = "Renesas Draak board based on r8a77995"; compatible = "renesas,draak", "renesas,r8a77995"; - - aliases { - serial0 = &scif2; - ethernet0 = &avb; - }; - - audio_clkout: audio-clkout { - /* - * This is same as <&rcar_sound 0> - * but needed to avoid cs2000/rcar_sound probe dead-lock - */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <12288000>; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm1 0 50000>; - - brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>; - default-brightness-level = <10>; - - power-supply = <®_12p0v>; - enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; - }; - - chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; - stdout-path = "serial0:115200n8"; - }; - - composite-in { - compatible = "composite-video-connector"; - - port { - composite_con_in: endpoint { - remote-endpoint = <&adv7180_in>; - }; - }; - }; - - hdmi-in { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&adv7612_in>; - }; - }; - }; - - hdmi-out { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_out: endpoint { - remote-endpoint = <&adv7511_out>; - }; - }; - }; - - keys { - compatible = "gpio-keys"; - - pinctrl-0 = <&keys_pins>; - pinctrl-names = "default"; - - key-1 { - gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; - linux,code = <KEY_1>; - label = "SW56-1"; - wakeup-source; - debounce-interval = <20>; - }; - key-2 { - gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; - linux,code = <KEY_2>; - label = "SW56-2"; - wakeup-source; - debounce-interval = <20>; - }; - key-3 { - gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; - linux,code = <KEY_3>; - label = "SW56-3"; - wakeup-source; - debounce-interval = <20>; - }; - key-4 { - gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; - linux,code = <KEY_4>; - label = "SW56-4"; - wakeup-source; - debounce-interval = <20>; - }; - }; - - lvds-decoder { - compatible = "thine,thc63lvd1024"; - vcc-supply = <®_3p3v>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - thc63lvd1024_in: endpoint { - remote-endpoint = <&lvds0_out>; - }; - }; - - port@2 { - reg = <2>; - thc63lvd1024_out: endpoint { - remote-endpoint = <&adv7511_in>; - }; - }; - }; - }; - - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0x0 0x48000000 0x0 0x18000000>; - }; - - reg_1p8v: regulator-1p8v { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_12p0v: regulator-12p0v { - compatible = "regulator-fixed"; - regulator-name = "D12.0V"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-boot-on; - regulator-always-on; - }; - - sound_card: sound { - compatible = "audio-graph-card"; - - dais = <&rsnd_port0 /* ak4613 */ - /* HDMI is not yet supported */ - >; - }; - - vga { - compatible = "vga-connector"; - - port { - vga_in: endpoint { - remote-endpoint = <&adv7123_out>; - }; - }; - }; - - vga-encoder { - compatible = "adi,adv7123"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7123_in: endpoint { - remote-endpoint = <&du_out_rgb>; - }; - }; - port@1 { - reg = <1>; - adv7123_out: endpoint { - remote-endpoint = <&vga_in>; - }; - }; - }; - }; - - x12_clk: x12 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <74250000>; - }; - - x19_clk: x19 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24576000>; - }; -}; - -&audio_clk_b { - /* - * X11 is connected to VI4_FIELD/SCIF_CLK/AUDIO_CLKB, - * and R-Car Sound uses AUDIO_CLKB. - * Note is that schematic indicates VI4_FIELD conection only - * not AUDIO_CLKB at SoC page. - * And this VI4_FIELD/SCIF_CLK/AUDIO_CLKB is connected to SW60. - * SW60 should be 1-2. - */ - - clock-frequency = <22579200>; -}; - -&avb { - pinctrl-0 = <&avb0_pins>; - pinctrl-names = "default"; - renesas,no-ether-link; - phy-handle = <&phy0>; - status = "okay"; - - phy0: ethernet-phy@0 { - rxc-skew-ps = <1500>; - reg = <0>; - interrupt-parent = <&gpio5>; - interrupts = <19 IRQ_TYPE_LEVEL_LOW>; - /* - * TX clock internal delay mode is required for reliable - * 1Gbps communication using the KSZ9031RNX phy present on - * the Draak board, however, TX clock internal delay mode - * isn't supported on r8a77995. Thus, limit speed to - * 100Mbps for reliable communication. - */ - max-speed = <100>; - }; -}; - -&can0 { - pinctrl-0 = <&can0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&can1 { - pinctrl-0 = <&can1_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&du { - pinctrl-0 = <&du_pins>; - pinctrl-names = "default"; - status = "okay"; - - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&x12_clk>; - clock-names = "du.0", "du.1", "dclkin.0"; - - ports { - port@0 { - endpoint { - remote-endpoint = <&adv7123_in>; - }; - }; - }; -}; - -&ehci0 { - dr_mode = "host"; - status = "okay"; -}; - -&extal_clk { - clock-frequency = <48000000>; -}; - -&hsusb { - dr_mode = "host"; - status = "okay"; -}; - -&i2c0 { - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - status = "okay"; - - ak4613: codec@10 { - compatible = "asahi-kasei,ak4613"; - #sound-dai-cells = <0>; - reg = <0x10>; - clocks = <&rcar_sound 0>; /* audio_clkout */ - - asahi-kasei,in1-single-end; - asahi-kasei,in2-single-end; - asahi-kasei,out1-single-end; - asahi-kasei,out2-single-end; - asahi-kasei,out3-single-end; - asahi-kasei,out4-single-end; - asahi-kasei,out5-single-end; - asahi-kasei,out6-single-end; - - port { - ak4613_endpoint: endpoint { - remote-endpoint = <&rsnd_for_ak4613>; - }; - }; - }; - - composite-in@20 { - compatible = "adi,adv7180cp"; - reg = <0x20>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7180_in: endpoint { - remote-endpoint = <&composite_con_in>; - }; - }; - - port@3 { - reg = <3>; - - /* - * The VIN4 video input path is shared between - * CVBS and HDMI inputs through SW[49-53] - * switches. - * - * CVBS is the default selection, link it to - * VIN4 here. - */ - adv7180_out: endpoint { - remote-endpoint = <&vin4_in>; - }; - }; - }; - - }; - - hdmi-encoder@39 { - compatible = "adi,adv7511w"; - reg = <0x39>, <0x3f>, <0x3c>, <0x38>; - reg-names = "main", "edid", "cec", "packet"; - interrupt-parent = <&gpio1>; - interrupts = <28 IRQ_TYPE_LEVEL_LOW>; - - adi,input-depth = <8>; - adi,input-colorspace = "rgb"; - adi,input-clock = "1x"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7511_in: endpoint { - remote-endpoint = <&thc63lvd1024_out>; - }; - }; - - port@1 { - reg = <1>; - adv7511_out: endpoint { - remote-endpoint = <&hdmi_con_out>; - }; - }; - }; - }; - - hdmi-decoder@4c { - compatible = "adi,adv7612"; - reg = <0x4c>; - default-input = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - adv7612_in: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; - }; - - port@2 { - reg = <2>; - - /* - * The VIN4 video input path is shared between - * CVBS and HDMI inputs through SW[49-53] - * switches. - * - * CVBS is the default selection, leave HDMI - * not connected here. - */ - adv7612_out: endpoint { - pclk-sample = <0>; - hsync-active = <0>; - vsync-active = <0>; - }; - }; - }; - }; - - cs2000: clk-multiplier@4f { - #clock-cells = <0>; - compatible = "cirrus,cs2000-cp"; - reg = <0x4f>; - clocks = <&audio_clkout>, <&x19_clk>; /* audio_clkout_1, x19 */ - clock-names = "clk_in", "ref_clk"; - - assigned-clocks = <&cs2000>; - assigned-clock-rates = <24576000>; /* 1/1 divide */ - }; - - eeprom@50 { - compatible = "rohm,br24t01", "atmel,24c01"; - reg = <0x50>; - pagesize = <8>; - }; -}; - -&i2c1 { - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&lvds0 { - status = "okay"; - - clocks = <&cpg CPG_MOD 727>, - <&x12_clk>, - <&extal_clk>; - clock-names = "fck", "dclkin.0", "extal"; - - ports { - port@1 { - lvds0_out: endpoint { - remote-endpoint = <&thc63lvd1024_in>; - }; - }; - }; -}; - -&lvds1 { - /* - * Even though the LVDS1 output is not connected, the encoder must be - * enabled to supply a pixel clock to the DU for the DPAD output when - * LVDS0 is in use. - */ - status = "okay"; - - clocks = <&cpg CPG_MOD 727>, - <&x12_clk>, - <&extal_clk>; - clock-names = "fck", "dclkin.0", "extal"; -}; - -&ohci0 { - dr_mode = "host"; - status = "okay"; -}; - -&pfc { - avb0_pins: avb { - groups = "avb0_link", "avb0_mdio", "avb0_mii"; - function = "avb0"; - }; - - can0_pins: can0 { - groups = "can0_data_a"; - function = "can0"; - }; - - can1_pins: can1 { - groups = "can1_data_a"; - function = "can1"; - }; - - du_pins: du { - groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; - function = "du"; - }; - - i2c0_pins: i2c0 { - groups = "i2c0"; - function = "i2c0"; - }; - - i2c1_pins: i2c1 { - groups = "i2c1"; - function = "i2c1"; - }; - - keys_pins: keys { - pins = "GP_4_12", "GP_4_13", "GP_4_14", "GP_4_15"; - bias-pull-up; - }; - - pwm0_pins: pwm0 { - groups = "pwm0_c"; - function = "pwm0"; - }; - - pwm1_pins: pwm1 { - groups = "pwm1_c"; - function = "pwm1"; - }; - - scif2_pins: scif2 { - groups = "scif2_data"; - function = "scif2"; - }; - - sdhi2_pins: sd2 { - groups = "mmc_data8", "mmc_ctrl"; - function = "mmc"; - power-source = <1800>; - }; - - sdhi2_pins_uhs: sd2_uhs { - groups = "mmc_data8", "mmc_ctrl"; - function = "mmc"; - power-source = <1800>; - }; - - sound_pins: sound { - groups = "ssi34_ctrl", "ssi3_data", "ssi4_data_a"; - function = "ssi"; - }; - - sound_clk_pins: sound-clk { - groups = "audio_clk_a", "audio_clk_b", - "audio_clkout", "audio_clkout1"; - function = "audio_clk"; - }; - - usb0_pins: usb0 { - groups = "usb0"; - function = "usb0"; - }; - - vin4_pins_cvbs: vin4 { - groups = "vin4_data8", "vin4_sync", "vin4_clk"; - function = "vin4"; - }; -}; - -&pwm0 { - pinctrl-0 = <&pwm0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&pwm1 { - pinctrl-0 = <&pwm1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&rcar_sound { - pinctrl-0 = <&sound_pins>, <&sound_clk_pins>; - pinctrl-names = "default"; - - /* Single DAI */ - #sound-dai-cells = <0>; - - /* audio_clkout0/1 */ - #clock-cells = <1>; - clock-frequency = <12288000 11289600>; - - status = "okay"; - - clocks = <&cpg CPG_MOD 1005>, - <&cpg CPG_MOD 1011>, <&cpg CPG_MOD 1012>, - <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>, - <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, - <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, - <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, - <&cs2000>, <&audio_clk_b>, - <&cpg CPG_CORE R8A77995_CLK_ZA2>; - - ports { - rsnd_port0: port { - rsnd_for_ak4613: endpoint { - remote-endpoint = <&ak4613_endpoint>; - dai-format = "left_j"; - bitclock-master = <&rsnd_for_ak4613>; - frame-master = <&rsnd_for_ak4613>; - playback = <&ssi3>, <&src5>, <&dvc0>; - capture = <&ssi4>, <&src6>, <&dvc1>; - }; - }; - }; -}; - -&rwdt { - timeout-sec = <60>; - status = "okay"; -}; - -&scif2 { - pinctrl-0 = <&scif2_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&sdhi2 { - /* used for on-board eMMC */ - pinctrl-0 = <&sdhi2_pins>; - pinctrl-1 = <&sdhi2_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <®_3p3v>; - vqmmc-supply = <®_1p8v>; - bus-width = <8>; - mmc-hs200-1_8v; - no-sd; - no-sdio; - non-removable; - status = "okay"; -}; - -&ssi4 { - shared-pin; -}; - -&usb2_phy0 { - pinctrl-0 = <&usb0_pins>; - pinctrl-names = "default"; - - renesas,no-otg-pins; - status = "okay"; -}; - -&vin4 { - pinctrl-0 = <&vin4_pins_cvbs>; - pinctrl-names = "default"; - - status = "okay"; - - ports { - port { - vin4_in: endpoint { - remote-endpoint = <&adv7180_out>; - }; - }; - }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi index a0a1a1da0d87..cd2f0d60f21a 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi @@ -6,6 +6,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> #include "r8a779a0.dtsi" @@ -22,6 +23,37 @@ stdout-path = "serial0:115200n8"; }; + keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&keys_pins>; + pinctrl-names = "default"; + + key-1 { + gpios = <&gpio6 18 GPIO_ACTIVE_LOW>; + linux,code = <KEY_1>; + label = "SW47"; + wakeup-source; + debounce-interval = <20>; + }; + + key-2 { + gpios = <&gpio6 19 GPIO_ACTIVE_LOW>; + linux,code = <KEY_2>; + label = "SW48"; + wakeup-source; + debounce-interval = <20>; + }; + + key-3 { + gpios = <&gpio6 20 GPIO_ACTIVE_LOW>; + linux,code = <KEY_3>; + label = "SW49"; + wakeup-source; + debounce-interval = <20>; + }; + }; + leds { compatible = "gpio-leds"; @@ -160,12 +192,22 @@ function = "i2c6"; }; + keys_pins: keys { + pins = "GP_6_18", "GP_6_19", "GP_6_20"; + bias-pull-up; + }; + mmc_pins: mmc { groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; function = "mmc"; power-source = <1800>; }; + qspi0_pins: qspi0 { + groups = "qspi0_ctrl", "qspi0_data4"; + function = "qspi0"; + }; + scif0_pins: scif0 { groups = "scif0_data", "scif0_ctrl"; function = "scif0"; @@ -177,6 +219,34 @@ }; }; +&rpc { + pinctrl-0 = <&qspi0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + compatible = "spansion,s25fs512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot@0 { + reg = <0x0 0xcc0000>; + read-only; + }; + user@cc0000 { + reg = <0xcc0000 0x3340000>; + }; + }; + }; +}; + &rwdt { timeout-sec = <60>; status = "okay"; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts index dc671ff57ec7..e46dc9aa0a43 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts @@ -27,6 +27,8 @@ status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio4>; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi index 631d520cebee..43bf2cbfbd8f 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi @@ -933,6 +933,17 @@ status = "disabled"; }; + tpu: pwm@e6e80000 { + compatible = "renesas,tpu-r8a779a0", "renesas,tpu"; + reg = <0 0xe6e80000 0 0x148>; + interrupts = <GIC_SPI 515 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 718>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 718>; + #pwm-cells = <3>; + status = "disabled"; + }; + msiof0: spi@e6e90000 { compatible = "renesas,msiof-r8a779a0", "renesas,rcar-gen3-msiof"; @@ -1023,6 +1034,902 @@ status = "disabled"; }; + vin00: video@e6ef0000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 730>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 730>; + renesas,id = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin00isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin00>; + }; + }; + }; + }; + + vin01: video@e6ef1000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 731>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 731>; + renesas,id = <1>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin01isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin01>; + }; + }; + }; + }; + + vin02: video@e6ef2000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 800>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 800>; + renesas,id = <2>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin02isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin02>; + }; + }; + }; + }; + + vin03: video@e6ef3000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ef3000 0 0x1000>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 801>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 801>; + renesas,id = <3>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin03isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin03>; + }; + }; + }; + }; + + vin04: video@e6ef4000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ef4000 0 0x1000>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 802>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 802>; + renesas,id = <4>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin04isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin04>; + }; + }; + }; + }; + + vin05: video@e6ef5000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ef5000 0 0x1000>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 803>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 803>; + renesas,id = <5>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin05isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin05>; + }; + }; + }; + }; + + vin06: video@e6ef6000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ef6000 0 0x1000>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 804>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 804>; + renesas,id = <6>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin06isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin06>; + }; + }; + }; + }; + + vin07: video@e6ef7000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ef7000 0 0x1000>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 805>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 805>; + renesas,id = <7>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin07isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin07>; + }; + }; + }; + }; + + vin08: video@e6ef8000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ef8000 0 0x1000>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 806>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 806>; + renesas,id = <8>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin08isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin08>; + }; + }; + }; + }; + + vin09: video@e6ef9000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ef9000 0 0x1000>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 807>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 807>; + renesas,id = <9>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin09isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin09>; + }; + }; + }; + }; + + vin10: video@e6efa000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6efa000 0 0x1000>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 808>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 808>; + renesas,id = <10>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin10isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin10>; + }; + }; + }; + }; + + vin11: video@e6efb000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6efb000 0 0x1000>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 809>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 809>; + renesas,id = <11>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin11isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin11>; + }; + }; + }; + }; + + vin12: video@e6efc000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6efc000 0 0x1000>; + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 810>; + renesas,id = <12>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin12isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin12>; + }; + }; + }; + }; + + vin13: video@e6efd000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6efd000 0 0x1000>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 811>; + renesas,id = <13>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin13isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin13>; + }; + }; + }; + }; + + vin14: video@e6efe000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6efe000 0 0x1000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 812>; + renesas,id = <14>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin14isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin14>; + }; + }; + }; + }; + + vin15: video@e6eff000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6eff000 0 0x1000>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 813>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 813>; + renesas,id = <15>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin15isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin15>; + }; + }; + }; + }; + + vin16: video@e6ed0000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ed0000 0 0x1000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 814>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 814>; + renesas,id = <16>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin16isp2: endpoint@2 { + reg = <2>; + remote-endpoint = <&isp2vin16>; + }; + }; + }; + }; + + vin17: video@e6ed1000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ed1000 0 0x1000>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 815>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 815>; + renesas,id = <17>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin17isp2: endpoint@2 { + reg = <2>; + remote-endpoint = <&isp2vin17>; + }; + }; + }; + }; + + vin18: video@e6ed2000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ed2000 0 0x1000>; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 816>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 816>; + renesas,id = <18>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin18isp2: endpoint@2 { + reg = <2>; + remote-endpoint = <&isp2vin18>; + }; + }; + }; + }; + + vin19: video@e6ed3000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ed3000 0 0x1000>; + interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 817>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 817>; + renesas,id = <19>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin19isp2: endpoint@2 { + reg = <2>; + remote-endpoint = <&isp2vin19>; + }; + }; + }; + }; + + vin20: video@e6ed4000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ed4000 0 0x1000>; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 818>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 818>; + renesas,id = <20>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin20isp2: endpoint@2 { + reg = <2>; + remote-endpoint = <&isp2vin20>; + }; + }; + }; + }; + + vin21: video@e6ed5000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ed5000 0 0x1000>; + interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 819>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 819>; + renesas,id = <21>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin21isp2: endpoint@2 { + reg = <2>; + remote-endpoint = <&isp2vin21>; + }; + }; + }; + }; + + vin22: video@e6ed6000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ed6000 0 0x1000>; + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 820>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 820>; + renesas,id = <22>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin22isp2: endpoint@2 { + reg = <2>; + remote-endpoint = <&isp2vin22>; + }; + }; + }; + }; + + vin23: video@e6ed7000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ed7000 0 0x1000>; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 821>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 821>; + renesas,id = <23>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin23isp2: endpoint@2 { + reg = <2>; + remote-endpoint = <&isp2vin23>; + }; + }; + }; + }; + + vin24: video@e6ed8000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ed8000 0 0x1000>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 822>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 822>; + renesas,id = <24>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin24isp3: endpoint@3 { + reg = <3>; + remote-endpoint = <&isp3vin24>; + }; + }; + }; + }; + + vin25: video@e6ed9000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ed9000 0 0x1000>; + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 823>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 823>; + renesas,id = <25>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin25isp3: endpoint@3 { + reg = <3>; + remote-endpoint = <&isp3vin25>; + }; + }; + }; + }; + + vin26: video@e6eda000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6eda000 0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 824>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 824>; + renesas,id = <26>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin26isp3: endpoint@3 { + reg = <3>; + remote-endpoint = <&isp3vin26>; + }; + }; + }; + }; + + vin27: video@e6edb000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6edb000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 825>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 825>; + renesas,id = <27>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin27isp3: endpoint@3 { + reg = <3>; + remote-endpoint = <&isp3vin27>; + }; + }; + }; + }; + + vin28: video@e6edc000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6edc000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 826>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 826>; + renesas,id = <28>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin28isp3: endpoint@3 { + reg = <3>; + remote-endpoint = <&isp3vin28>; + }; + }; + }; + }; + + vin29: video@e6edd000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6edd000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 827>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 827>; + renesas,id = <29>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin29isp3: endpoint@3 { + reg = <3>; + remote-endpoint = <&isp3vin29>; + }; + }; + }; + }; + + vin30: video@e6ede000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6ede000 0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 828>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 828>; + renesas,id = <30>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin30isp3: endpoint@3 { + reg = <3>; + remote-endpoint = <&isp3vin30>; + }; + }; + }; + }; + + vin31: video@e6edf000 { + compatible = "renesas,vin-r8a779a0"; + reg = <0 0xe6edf000 0 0x1000>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 829>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 829>; + renesas,id = <31>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin31isp3: endpoint@3 { + reg = <3>; + remote-endpoint = <&isp3vin31>; + }; + }; + }; + }; + dmac1: dma-controller@e7350000 { compatible = "renesas,dmac-r8a779a0"; reg = <0 0xe7350000 0 0x1000>, @@ -1090,9 +1997,124 @@ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; resets = <&cpg 706>; max-frequency = <200000000>; + iommus = <&ipmmu_ds0 32>; status = "disabled"; }; + rpc: spi@ee200000 { + compatible = "renesas,r8a779a0-rpc-if", + "renesas,rcar-gen3-rpc-if"; + reg = <0 0xee200000 0 0x200>, + <0 0x08000000 0 0x04000000>, + <0 0xee208000 0 0x100>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 629>; + clock-names = "rpc"; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 629>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ipmmu_rt0: iommu@ee480000 { + compatible = "renesas,ipmmu-r8a779a0"; + reg = <0 0xee480000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm 10>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_rt1: iommu@ee4c0000 { + compatible = "renesas,ipmmu-r8a779a0"; + reg = <0 0xee4c0000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm 19>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ds0: iommu@eed00000 { + compatible = "renesas,ipmmu-r8a779a0"; + reg = <0 0xeed00000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ds1: iommu@eed40000 { + compatible = "renesas,ipmmu-r8a779a0"; + reg = <0 0xeed40000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm 1>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ir: iommu@eed80000 { + compatible = "renesas,ipmmu-r8a779a0"; + reg = <0 0xeed80000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm 3>; + power-domains = <&sysc R8A779A0_PD_A3IR>; + #iommu-cells = <1>; + }; + + ipmmu_vc0: iommu@eedc0000 { + compatible = "renesas,ipmmu-r8a779a0"; + reg = <0 0xeedc0000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm 12>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vi0: iommu@eee80000 { + compatible = "renesas,ipmmu-r8a779a0"; + reg = <0 0xeee80000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm 14>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vi1: iommu@eeec0000 { + compatible = "renesas,ipmmu-r8a779a0"; + reg = <0 0xeeec0000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm 15>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_3dg: iommu@eee00000 { + compatible = "renesas,ipmmu-r8a779a0"; + reg = <0 0xeee00000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm 6>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vip0: iommu@eef00000 { + compatible = "renesas,ipmmu-r8a779a0"; + reg = <0 0xeef00000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm 5>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vip1: iommu@eef40000 { + compatible = "renesas,ipmmu-r8a779a0"; + reg = <0 0xeef40000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm 11>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mm: iommu@eefc0000 { + compatible = "renesas,ipmmu-r8a779a0"; + reg = <0 0xeefc0000 0 0x20000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + gic: interrupt-controller@f1000000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; @@ -1142,6 +2164,442 @@ renesas,fcp = <&fcpvd1>; }; + csi40: csi2@feaa0000 { + compatible = "renesas,r8a779a0-csi2"; + reg = <0 0xfeaa0000 0 0x10000>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 331>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + csi40isp0: endpoint { + remote-endpoint = <&isp0csi40>; + }; + }; + }; + }; + + csi41: csi2@feab0000 { + compatible = "renesas,r8a779a0-csi2"; + reg = <0 0xfeab0000 0 0x10000>; + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 400>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 400>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + csi41isp1: endpoint { + remote-endpoint = <&isp1csi41>; + }; + }; + }; + }; + + csi42: csi2@fed60000 { + compatible = "renesas,r8a779a0-csi2"; + reg = <0 0xfed60000 0 0x10000>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 401>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 401>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + csi42isp2: endpoint { + remote-endpoint = <&isp2csi42>; + }; + }; + }; + }; + + csi43: csi2@fed70000 { + compatible = "renesas,r8a779a0-csi2"; + reg = <0 0xfed70000 0 0x10000>; + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 402>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + csi43isp3: endpoint { + remote-endpoint = <&isp3csi43>; + }; + }; + }; + }; + + isp0: isp@fed00000 { + compatible = "renesas,r8a779a0-isp"; + reg = <0 0xfed00000 0 0x10000>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 612>; + power-domains = <&sysc R8A779A0_PD_A3ISP01>; + resets = <&cpg 612>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0>; + + isp0csi40: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi40isp0>; + }; + }; + + port@1 { + reg = <1>; + isp0vin00: endpoint { + remote-endpoint = <&vin00isp0>; + }; + }; + + port@2 { + reg = <2>; + isp0vin01: endpoint { + remote-endpoint = <&vin01isp0>; + }; + }; + + port@3 { + reg = <3>; + isp0vin02: endpoint { + remote-endpoint = <&vin02isp0>; + }; + }; + + port@4 { + reg = <4>; + isp0vin03: endpoint { + remote-endpoint = <&vin03isp0>; + }; + }; + + port@5 { + reg = <5>; + isp0vin04: endpoint { + remote-endpoint = <&vin04isp0>; + }; + }; + + port@6 { + reg = <6>; + isp0vin05: endpoint { + remote-endpoint = <&vin05isp0>; + }; + }; + + port@7 { + reg = <7>; + isp0vin06: endpoint { + remote-endpoint = <&vin06isp0>; + }; + }; + + port@8 { + reg = <8>; + isp0vin07: endpoint { + remote-endpoint = <&vin07isp0>; + }; + }; + }; + }; + + isp1: isp@fed20000 { + compatible = "renesas,r8a779a0-isp"; + reg = <0 0xfed20000 0 0x10000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 613>; + power-domains = <&sysc R8A779A0_PD_A3ISP01>; + resets = <&cpg 613>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0>; + + isp1csi41: endpoint@1 { + reg = <1>; + remote-endpoint = <&csi41isp1>; + }; + }; + + port@1 { + reg = <1>; + isp1vin08: endpoint { + remote-endpoint = <&vin08isp1>; + }; + }; + + port@2 { + reg = <2>; + isp1vin09: endpoint { + remote-endpoint = <&vin09isp1>; + }; + }; + + port@3 { + reg = <3>; + isp1vin10: endpoint { + remote-endpoint = <&vin10isp1>; + }; + }; + + port@4 { + reg = <4>; + isp1vin11: endpoint { + remote-endpoint = <&vin11isp1>; + }; + }; + + port@5 { + reg = <5>; + isp1vin12: endpoint { + remote-endpoint = <&vin12isp1>; + }; + }; + + port@6 { + reg = <6>; + isp1vin13: endpoint { + remote-endpoint = <&vin13isp1>; + }; + }; + + port@7 { + reg = <7>; + isp1vin14: endpoint { + remote-endpoint = <&vin14isp1>; + }; + }; + + port@8 { + reg = <8>; + isp1vin15: endpoint { + remote-endpoint = <&vin15isp1>; + }; + }; + }; + }; + + isp2: isp@fed30000 { + compatible = "renesas,r8a779a0-isp"; + reg = <0 0xfed30000 0 0x10000>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 614>; + power-domains = <&sysc R8A779A0_PD_A3ISP23>; + resets = <&cpg 614>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0>; + + isp2csi42: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi42isp2>; + }; + }; + + port@1 { + reg = <1>; + isp2vin16: endpoint { + remote-endpoint = <&vin16isp2>; + }; + }; + + port@2 { + reg = <2>; + isp2vin17: endpoint { + remote-endpoint = <&vin17isp2>; + }; + }; + + port@3 { + reg = <3>; + isp2vin18: endpoint { + remote-endpoint = <&vin18isp2>; + }; + }; + + port@4 { + reg = <4>; + isp2vin19: endpoint { + remote-endpoint = <&vin19isp2>; + }; + }; + + port@5 { + reg = <5>; + isp2vin20: endpoint { + remote-endpoint = <&vin20isp2>; + }; + }; + + port@6 { + reg = <6>; + isp2vin21: endpoint { + remote-endpoint = <&vin21isp2>; + }; + }; + + port@7 { + reg = <7>; + isp2vin22: endpoint { + remote-endpoint = <&vin22isp2>; + }; + }; + + port@8 { + reg = <8>; + isp2vin23: endpoint { + remote-endpoint = <&vin23isp2>; + }; + }; + }; + }; + + isp3: isp@fed40000 { + compatible = "renesas,r8a779a0-isp"; + reg = <0 0xfed40000 0 0x10000>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 615>; + power-domains = <&sysc R8A779A0_PD_A3ISP23>; + resets = <&cpg 615>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0>; + + isp3csi43: endpoint@1 { + reg = <1>; + remote-endpoint = <&csi43isp3>; + }; + }; + + port@1 { + reg = <1>; + isp3vin24: endpoint { + remote-endpoint = <&vin24isp3>; + }; + }; + + port@2 { + reg = <2>; + isp3vin25: endpoint { + remote-endpoint = <&vin25isp3>; + }; + }; + + port@3 { + reg = <3>; + isp3vin26: endpoint { + remote-endpoint = <&vin26isp3>; + }; + }; + + port@4 { + reg = <4>; + isp3vin27: endpoint { + remote-endpoint = <&vin27isp3>; + }; + }; + + port@5 { + reg = <5>; + isp3vin28: endpoint { + remote-endpoint = <&vin28isp3>; + }; + }; + + port@6 { + reg = <6>; + isp3vin29: endpoint { + remote-endpoint = <&vin29isp3>; + }; + }; + + port@7 { + reg = <7>; + isp3vin30: endpoint { + remote-endpoint = <&vin30isp3>; + }; + }; + + port@8 { + reg = <8>; + isp3vin31: endpoint { + remote-endpoint = <&vin31isp3>; + }; + }; + }; + }; + prr: chipid@fff00044 { compatible = "renesas,prr"; reg = <0 0xfff00044 0 4>; diff --git a/arch/arm64/boot/dts/renesas/r8a779m0.dtsi b/arch/arm64/boot/dts/renesas/r8a779m0.dtsi new file mode 100644 index 000000000000..6fb1979cc041 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m0.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the R-Car H3e (R8A779M0) SoC + * + * Copyright (C) 2021 Glider bv + */ + +#include "r8a77951.dtsi" + +/ { + compatible = "renesas,r8a779m0", "renesas,r8a7795"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779m1.dtsi b/arch/arm64/boot/dts/renesas/r8a779m1.dtsi index 0e9b04469b83..b6e855f52adf 100644 --- a/arch/arm64/boot/dts/renesas/r8a779m1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779m1.dtsi @@ -10,3 +10,12 @@ / { compatible = "renesas,r8a779m1", "renesas,r8a7795"; }; + +&cluster0_opp { + opp-2000000000 { + opp-hz = /bits/ 64 <2000000000>; + opp-microvolt = <960000>; + clock-latency-ns = <300000>; + turbo-mode; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779m2.dtsi b/arch/arm64/boot/dts/renesas/r8a779m2.dtsi new file mode 100644 index 000000000000..324627340b86 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m2.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the R-Car M3e (R8A779M2) SoC + * + * Copyright (C) 2021 Glider bv + */ + +#include "r8a77961.dtsi" + +/ { + compatible = "renesas,r8a779m2", "renesas,r8a77961"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779m3.dtsi b/arch/arm64/boot/dts/renesas/r8a779m3.dtsi index 65bb6188ccf5..6cff38a6d20b 100644 --- a/arch/arm64/boot/dts/renesas/r8a779m3.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779m3.dtsi @@ -10,3 +10,12 @@ / { compatible = "renesas,r8a779m3", "renesas,r8a77961"; }; + +&cluster0_opp { + opp-2000000000 { + opp-hz = /bits/ 64 <2000000000>; + opp-microvolt = <960000>; + clock-latency-ns = <300000>; + turbo-mode; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779m4.dtsi b/arch/arm64/boot/dts/renesas/r8a779m4.dtsi new file mode 100644 index 000000000000..d7fbb6c05502 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m4.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the R-Car M3Ne (R8A779M4) SoC + * + * Copyright (C) 2021 Glider bv + */ + +#include "r8a77965.dtsi" + +/ { + compatible = "renesas,r8a779m4", "renesas,r8a77965"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779m5-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a779m5-salvator-xs.dts new file mode 100644 index 000000000000..c0341a88d641 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m5-salvator-xs.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the Salvator-X 2nd version board with R-Car M3Ne-2G + * + * Copyright (C) 2021 Glider bv + * + * Based on r8a77965-salvator-xs.dts + * Copyright (C) 2017 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a779m5.dtsi" +#include "salvator-xs.dtsi" + +/ { + model = "Renesas Salvator-X 2nd version board based on r8a779m5"; + compatible = "renesas,salvator-xs", "renesas,r8a779m5", + "renesas,r8a77965"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 721>, + <&versaclock6 1>, + <&x21_clk>, + <&versaclock6 2>; + clock-names = "du.0", "du.1", "du.3", + "dclkin.0", "dclkin.1", "dclkin.3"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779m5.dtsi b/arch/arm64/boot/dts/renesas/r8a779m5.dtsi new file mode 100644 index 000000000000..8c9c0557fe77 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m5.dtsi @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the R-Car M3Ne-2G (R8A779M5) SoC + * + * Copyright (C) 2021 Glider bv + */ + +#include "r8a77965.dtsi" + +/ { + compatible = "renesas,r8a779m5", "renesas,r8a77965"; +}; + +&cluster0_opp { + opp-2000000000 { + opp-hz = /bits/ 64 <2000000000>; + opp-microvolt = <960000>; + clock-latency-ns = <300000>; + turbo-mode; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779m6.dtsi b/arch/arm64/boot/dts/renesas/r8a779m6.dtsi new file mode 100644 index 000000000000..afe3cabfb898 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m6.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the R-Car E3e (R8A779M6) SoC + * + * Copyright (C) 2021 Glider bv + */ + +#include "r8a77990.dtsi" + +/ { + compatible = "renesas,r8a779m6", "renesas,r8a77990"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779m7.dtsi b/arch/arm64/boot/dts/renesas/r8a779m7.dtsi new file mode 100644 index 000000000000..4958babc52fd --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m7.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the R-Car D3e (R8A779M7) SoC + * + * Copyright (C) 2021 Glider bv + */ + +#include "r8a77995.dtsi" + +/ { + compatible = "renesas,r8a779m7", "renesas,r8a77995"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779m8.dtsi b/arch/arm64/boot/dts/renesas/r8a779m8.dtsi new file mode 100644 index 000000000000..752440b0c40f --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m8.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the R-Car H3Ne (R8A779M8) SoC + * + * Copyright (C) 2021 Glider bv + */ + +#include "r8a77951.dtsi" + +/ { + compatible = "renesas,r8a779m8", "renesas,r8a7795"; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi index 5f3bc2898daf..485ef5f0fea1 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi @@ -13,6 +13,20 @@ #address-cells = <2>; #size-cells = <2>; + audio_clk1: audio_clk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by boards that provide it */ + clock-frequency = <0>; + }; + + audio_clk2: audio_clk2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by boards that provide it */ + clock-frequency = <0>; + }; + /* External CAN clock - to be overridden by boards that provide it */ can_clk: can { compatible = "fixed-clock"; @@ -78,6 +92,90 @@ #size-cells = <2>; ranges; + ssi0: ssi@10049c00 { + compatible = "renesas,r9a07g044-ssi", + "renesas,rz-ssi"; + reg = <0 0x10049c00 0 0x400>; + interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 329 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + clocks = <&cpg CPG_MOD R9A07G044_SSI0_PCLK2>, + <&cpg CPG_MOD R9A07G044_SSI0_PCLK_SFR>, + <&audio_clk1>, <&audio_clk2>; + clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; + resets = <&cpg R9A07G044_SSI0_RST_M2_REG>; + dmas = <&dmac 0x2655>, <&dmac 0x2656>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + ssi1: ssi@1004a000 { + compatible = "renesas,r9a07g044-ssi", + "renesas,rz-ssi"; + reg = <0 0x1004a000 0 0x400>; + interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 333 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + clocks = <&cpg CPG_MOD R9A07G044_SSI1_PCLK2>, + <&cpg CPG_MOD R9A07G044_SSI1_PCLK_SFR>, + <&audio_clk1>, <&audio_clk2>; + clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; + resets = <&cpg R9A07G044_SSI1_RST_M2_REG>; + dmas = <&dmac 0x2659>, <&dmac 0x265a>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + ssi2: ssi@1004a400 { + compatible = "renesas,r9a07g044-ssi", + "renesas,rz-ssi"; + reg = <0 0x1004a400 0 0x400>; + interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 336 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 337 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + clocks = <&cpg CPG_MOD R9A07G044_SSI2_PCLK2>, + <&cpg CPG_MOD R9A07G044_SSI2_PCLK_SFR>, + <&audio_clk1>, <&audio_clk2>; + clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; + resets = <&cpg R9A07G044_SSI2_RST_M2_REG>; + dmas = <&dmac 0x265f>; + dma-names = "rt"; + power-domains = <&cpg>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + ssi3: ssi@1004a800 { + compatible = "renesas,r9a07g044-ssi", + "renesas,rz-ssi"; + reg = <0 0x1004a800 0 0x400>; + interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 341 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + clocks = <&cpg CPG_MOD R9A07G044_SSI3_PCLK2>, + <&cpg CPG_MOD R9A07G044_SSI3_PCLK_SFR>, + <&audio_clk1>, <&audio_clk2>; + clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; + resets = <&cpg R9A07G044_SSI3_RST_M2_REG>; + dmas = <&dmac 0x2661>, <&dmac 0x2662>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + scif0: serial@1004b800 { compatible = "renesas,scif-r9a07g044"; reg = <0 0x1004b800 0 0x400>; @@ -260,6 +358,23 @@ }; }; + sbc: spi@10060000 { + compatible = "renesas,r9a07g044-rpc-if", + "renesas,rzg2l-rpc-if"; + reg = <0 0x10060000 0 0x10000>, + <0 0x20000000 0 0x10000000>, + <0 0x10070000 0 0x10000>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G044_SPI_CLK2>, + <&cpg CPG_MOD R9A07G044_SPI_CLK>; + resets = <&cpg R9A07G044_SPI_RST>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + cpg: clock-controller@11010000 { compatible = "renesas,r9a07g044-cpg"; reg = <0 0x11010000 0 0x10000>; @@ -295,6 +410,42 @@ <&cpg R9A07G044_GPIO_SPARE_RESETN>; }; + dmac: dma-controller@11820000 { + compatible = "renesas,r9a07g044-dmac", + "renesas,rz-dmac"; + reg = <0 0x11820000 0 0x10000>, + <0 0x11830000 0 0x10000>; + interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD R9A07G044_DMAC_ACLK>, + <&cpg CPG_MOD R9A07G044_DMAC_PCLK>; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_DMAC_ARESETN>, + <&cpg R9A07G044_DMAC_RST_ASYNC>; + #dma-cells = <1>; + dma-channels = <16>; + }; + gic: interrupt-controller@11900000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; @@ -304,6 +455,192 @@ <0x0 0x11940000 0 0x60000>; interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; }; + + sdhi0: mmc@11c00000 { + compatible = "renesas,sdhi-r9a07g044", + "renesas,rcar-gen3-sdhi"; + reg = <0x0 0x11c00000 0 0x10000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G044_SDHI0_IMCLK>, + <&cpg CPG_MOD R9A07G044_SDHI0_IMCLK2>, + <&cpg CPG_MOD R9A07G044_SDHI0_CLK_HS>, + <&cpg CPG_MOD R9A07G044_SDHI0_ACLK>; + clock-names = "imclk", "imclk2", "clk_hs", "aclk"; + resets = <&cpg R9A07G044_SDHI0_IXRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + sdhi1: mmc@11c10000 { + compatible = "renesas,sdhi-r9a07g044", + "renesas,rcar-gen3-sdhi"; + reg = <0x0 0x11c10000 0 0x10000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G044_SDHI1_IMCLK>, + <&cpg CPG_MOD R9A07G044_SDHI1_IMCLK2>, + <&cpg CPG_MOD R9A07G044_SDHI1_CLK_HS>, + <&cpg CPG_MOD R9A07G044_SDHI1_ACLK>; + clock-names = "imclk", "imclk2", "clk_hs", "aclk"; + resets = <&cpg R9A07G044_SDHI1_IXRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + eth0: ethernet@11c20000 { + compatible = "renesas,r9a07g044-gbeth", + "renesas,rzg2l-gbeth"; + reg = <0 0x11c20000 0 0x10000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mux", "fil", "arp_ns"; + phy-mode = "rgmii"; + clocks = <&cpg CPG_MOD R9A07G044_ETH0_CLK_AXI>, + <&cpg CPG_MOD R9A07G044_ETH0_CLK_CHI>, + <&cpg CPG_CORE R9A07G044_CLK_HP>; + clock-names = "axi", "chi", "refclk"; + resets = <&cpg R9A07G044_ETH0_RST_HW_N>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + eth1: ethernet@11c30000 { + compatible = "renesas,r9a07g044-gbeth", + "renesas,rzg2l-gbeth"; + reg = <0 0x11c30000 0 0x10000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mux", "fil", "arp_ns"; + phy-mode = "rgmii"; + clocks = <&cpg CPG_MOD R9A07G044_ETH1_CLK_AXI>, + <&cpg CPG_MOD R9A07G044_ETH1_CLK_CHI>, + <&cpg CPG_CORE R9A07G044_CLK_HP>; + clock-names = "axi", "chi", "refclk"; + resets = <&cpg R9A07G044_ETH1_RST_HW_N>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + phyrst: usbphy-ctrl@11c40000 { + compatible = "renesas,r9a07g044-usbphy-ctrl", + "renesas,rzg2l-usbphy-ctrl"; + reg = <0 0x11c40000 0 0x10000>; + clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>; + resets = <&cpg R9A07G044_USB_PRESETN>; + power-domains = <&cpg>; + #reset-cells = <1>; + status = "disabled"; + }; + + ohci0: usb@11c50000 { + compatible = "generic-ohci"; + reg = <0 0x11c50000 0 0x100>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, + <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>; + resets = <&phyrst 0>, + <&cpg R9A07G044_USB_U2H0_HRESETN>; + phys = <&usb2_phy0 1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ohci1: usb@11c70000 { + compatible = "generic-ohci"; + reg = <0 0x11c70000 0 0x100>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, + <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>; + resets = <&phyrst 1>, + <&cpg R9A07G044_USB_U2H1_HRESETN>; + phys = <&usb2_phy1 1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ehci0: usb@11c50100 { + compatible = "generic-ehci"; + reg = <0 0x11c50100 0 0x100>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, + <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>; + resets = <&phyrst 0>, + <&cpg R9A07G044_USB_U2H0_HRESETN>; + phys = <&usb2_phy0 2>; + phy-names = "usb"; + companion = <&ohci0>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ehci1: usb@11c70100 { + compatible = "generic-ehci"; + reg = <0 0x11c70100 0 0x100>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, + <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>; + resets = <&phyrst 1>, + <&cpg R9A07G044_USB_U2H1_HRESETN>; + phys = <&usb2_phy1 2>; + phy-names = "usb"; + companion = <&ohci1>; + power-domains = <&cpg>; + status = "disabled"; + }; + + usb2_phy0: usb-phy@11c50200 { + compatible = "renesas,usb2-phy-r9a07g044", + "renesas,rzg2l-usb2-phy"; + reg = <0 0x11c50200 0 0x700>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, + <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>; + resets = <&phyrst 0>; + #phy-cells = <1>; + power-domains = <&cpg>; + status = "disabled"; + }; + + usb2_phy1: usb-phy@11c70200 { + compatible = "renesas,usb2-phy-r9a07g044", + "renesas,rzg2l-usb2-phy"; + reg = <0 0x11c70200 0 0x700>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, + <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>; + resets = <&phyrst 1>; + #phy-cells = <1>; + power-domains = <&cpg>; + status = "disabled"; + }; + + hsusb: usb@11c60000 { + compatible = "renesas,usbhs-r9a07g044", + "renesas,rza2-usbhs"; + reg = <0 0x11c60000 0 0x10000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, + <&cpg CPG_MOD R9A07G044_USB_U2P_EXR_CPUCLK>; + resets = <&phyrst 0>, + <&cpg R9A07G044_USB_U2P_EXL_SYSRST>; + renesas,buswait = <7>; + phys = <&usb2_phy0 3>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; }; timer { diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts index d3f72ec62f03..247b0b3f1b58 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts +++ b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts @@ -7,15 +7,10 @@ /dts-v1/; #include "r9a07g044l2.dtsi" +#include "rzg2l-smarc-som.dtsi" #include "rzg2l-smarc.dtsi" / { model = "Renesas SMARC EVK based on r9a07g044l2"; compatible = "renesas,smarc-evk", "renesas,r9a07g044l2", "renesas,r9a07g044"; - - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0x0 0x48000000 0x0 0x78000000>; - }; }; diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi new file mode 100644 index 000000000000..7e84a29dddfa --- /dev/null +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi @@ -0,0 +1,275 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2L SMARC SOM common parts + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> + +/* SW1[2] should be at position 2/OFF to enable 64 GB eMMC */ +#define EMMC 1 + +/* + * To enable uSD card on CN3, + * SW1[2] should be at position 3/ON. + * Disable eMMC by setting "#define EMMC 0" above. + */ +#define SDHI (!EMMC) + +/ { + aliases { + ethernet0 = ð0; + ethernet1 = ð1; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + states = <3300000 1>, <1800000 0>; + regulator-boot-on; + gpios = <&pinctrl RZG2L_GPIO(39, 0) GPIO_ACTIVE_HIGH>; + regulator-always-on; + }; +}; + +&adc { + pinctrl-0 = <&adc_pins>; + pinctrl-names = "default"; + status = "okay"; + + /delete-node/ channel@6; + /delete-node/ channel@7; +}; + +ð0 { + pinctrl-0 = <ð0_pins>; + pinctrl-names = "default"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + status = "okay"; + + phy0: ethernet-phy@7 { + compatible = "ethernet-phy-id0022.1640", + "ethernet-phy-ieee802.3-c22"; + reg = <7>; + rxc-skew-psec = <2400>; + txc-skew-psec = <2400>; + rxdv-skew-psec = <0>; + txdv-skew-psec = <0>; + rxd0-skew-psec = <0>; + rxd1-skew-psec = <0>; + rxd2-skew-psec = <0>; + rxd3-skew-psec = <0>; + txd0-skew-psec = <0>; + txd1-skew-psec = <0>; + txd2-skew-psec = <0>; + txd3-skew-psec = <0>; + }; +}; + +ð1 { + pinctrl-0 = <ð1_pins>; + pinctrl-names = "default"; + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + status = "okay"; + + phy1: ethernet-phy@7 { + compatible = "ethernet-phy-id0022.1640", + "ethernet-phy-ieee802.3-c22"; + reg = <7>; + rxc-skew-psec = <2400>; + txc-skew-psec = <2400>; + rxdv-skew-psec = <0>; + txdv-skew-psec = <0>; + rxd0-skew-psec = <0>; + rxd1-skew-psec = <0>; + rxd2-skew-psec = <0>; + rxd3-skew-psec = <0>; + txd0-skew-psec = <0>; + txd1-skew-psec = <0>; + txd2-skew-psec = <0>; + txd3-skew-psec = <0>; + }; +}; + +&extal_clk { + clock-frequency = <24000000>; +}; + +&pinctrl { + adc_pins: adc { + pinmux = <RZG2L_PORT_PINMUX(9, 0, 2)>; /* ADC_TRG */ + }; + + eth0_pins: eth0 { + pinmux = <RZG2L_PORT_PINMUX(28, 1, 1)>, /* ET0_LINKSTA */ + <RZG2L_PORT_PINMUX(27, 1, 1)>, /* ET0_MDC */ + <RZG2L_PORT_PINMUX(28, 0, 1)>, /* ET0_MDIO */ + <RZG2L_PORT_PINMUX(20, 0, 1)>, /* ET0_TXC */ + <RZG2L_PORT_PINMUX(20, 1, 1)>, /* ET0_TX_CTL */ + <RZG2L_PORT_PINMUX(20, 2, 1)>, /* ET0_TXD0 */ + <RZG2L_PORT_PINMUX(21, 0, 1)>, /* ET0_TXD1 */ + <RZG2L_PORT_PINMUX(21, 1, 1)>, /* ET0_TXD2 */ + <RZG2L_PORT_PINMUX(22, 0, 1)>, /* ET0_TXD3 */ + <RZG2L_PORT_PINMUX(24, 0, 1)>, /* ET0_RXC */ + <RZG2L_PORT_PINMUX(24, 1, 1)>, /* ET0_RX_CTL */ + <RZG2L_PORT_PINMUX(25, 0, 1)>, /* ET0_RXD0 */ + <RZG2L_PORT_PINMUX(25, 1, 1)>, /* ET0_RXD1 */ + <RZG2L_PORT_PINMUX(26, 0, 1)>, /* ET0_RXD2 */ + <RZG2L_PORT_PINMUX(26, 1, 1)>; /* ET0_RXD3 */ + }; + + eth1_pins: eth1 { + pinmux = <RZG2L_PORT_PINMUX(37, 2, 1)>, /* ET1_LINKSTA */ + <RZG2L_PORT_PINMUX(37, 0, 1)>, /* ET1_MDC */ + <RZG2L_PORT_PINMUX(37, 1, 1)>, /* ET1_MDIO */ + <RZG2L_PORT_PINMUX(29, 0, 1)>, /* ET1_TXC */ + <RZG2L_PORT_PINMUX(29, 1, 1)>, /* ET1_TX_CTL */ + <RZG2L_PORT_PINMUX(30, 0, 1)>, /* ET1_TXD0 */ + <RZG2L_PORT_PINMUX(30, 1, 1)>, /* ET1_TXD1 */ + <RZG2L_PORT_PINMUX(31, 0, 1)>, /* ET1_TXD2 */ + <RZG2L_PORT_PINMUX(31, 1, 1)>, /* ET1_TXD3 */ + <RZG2L_PORT_PINMUX(33, 1, 1)>, /* ET1_RXC */ + <RZG2L_PORT_PINMUX(34, 0, 1)>, /* ET1_RX_CTL */ + <RZG2L_PORT_PINMUX(34, 1, 1)>, /* ET1_RXD0 */ + <RZG2L_PORT_PINMUX(35, 0, 1)>, /* ET1_RXD1 */ + <RZG2L_PORT_PINMUX(35, 1, 1)>, /* ET1_RXD2 */ + <RZG2L_PORT_PINMUX(36, 0, 1)>; /* ET1_RXD3 */ + }; + + gpio-sd0-pwr-en-hog { + gpio-hog; + gpios = <RZG2L_GPIO(4, 1) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "gpio_sd0_pwr_en"; + }; + + /* + * SD0 device selection is XOR between GPIO_SD0_DEV_SEL and SW1[2] + * The below switch logic can be used to select the device between + * eMMC and microSD, after setting GPIO_SD0_DEV_SEL to high in DT. + * SW1[2] should be at position 2/OFF to enable 64 GB eMMC + * SW1[2] should be at position 3/ON to enable uSD card CN3 + */ + sd0-dev-sel-hog { + gpio-hog; + gpios = <RZG2L_GPIO(41, 1) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "sd0_dev_sel"; + }; + + sdhi0_emmc_pins: sd0emmc { + sd0_emmc_data { + pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3", + "SD0_DATA4", "SD0_DATA5", "SD0_DATA6", "SD0_DATA7"; + power-source = <1800>; + }; + + sd0_emmc_ctrl { + pins = "SD0_CLK", "SD0_CMD"; + power-source = <1800>; + }; + + sd0_emmc_rst { + pins = "SD0_RST#"; + power-source = <1800>; + }; + }; + + sdhi0_pins: sd0 { + sd0_data { + pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3"; + power-source = <3300>; + }; + + sd0_ctrl { + pins = "SD0_CLK", "SD0_CMD"; + power-source = <3300>; + }; + + sd0_mux { + pinmux = <RZG2L_PORT_PINMUX(47, 0, 2)>; /* SD0_CD */ + }; + }; + + sdhi0_pins_uhs: sd0_uhs { + sd0_data_uhs { + pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3"; + power-source = <1800>; + }; + + sd0_ctrl_uhs { + pins = "SD0_CLK", "SD0_CMD"; + power-source = <1800>; + }; + + sd0_mux_uhs { + pinmux = <RZG2L_PORT_PINMUX(47, 0, 2)>; /* SD0_CD */ + }; + }; +}; + +#if SDHI +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <&vccq_sdhi0>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; +#endif + +#if EMMC +&sdhi0 { + pinctrl-0 = <&sdhi0_emmc_pins>; + pinctrl-1 = <&sdhi0_emmc_pins>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + fixed-emmc-driver-type = <1>; + status = "okay"; +}; +#endif diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi index adcd4f50519e..2863e487a640 100644 --- a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi @@ -6,22 +6,308 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> + +/* + * SSI-WM8978 + * + * This command is required when Playback/Capture + * + * amixer cset name='Left Input Mixer L2 Switch' on + * amixer cset name='Right Input Mixer R2 Switch' on + * amixer cset name='Headphone Playback Volume' 100 + * amixer cset name='PCM Volume' 100% + * amixer cset name='Input PGA Volume' 25 + * + */ / { aliases { serial0 = &scif0; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c3 = &i2c3; }; chosen { - bootargs = "ignore_loglevel"; stdout-path = "serial0:115200n8"; }; + + audio_mclock: audio_mclock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + }; + + snd_rzg2l: sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&cpu_dai>; + simple-audio-card,frame-master = <&cpu_dai>; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,widgets = "Microphone", "Microphone Jack"; + simple-audio-card,routing = + "L2", "Mic Bias", + "R2", "Mic Bias", + "Mic Bias", "Microphone Jack"; + + cpu_dai: simple-audio-card,cpu { + sound-dai = <&ssi0>; + }; + + codec_dai: simple-audio-card,codec { + clocks = <&audio_mclock>; + sound-dai = <&wm8978>; + }; + }; + + usb0_vbus_otg: regulator-usb0-vbus-otg { + compatible = "regulator-fixed"; + + regulator-name = "USB0_VBUS_OTG"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vccq_sdhi1: regulator-vccq-sdhi1 { + compatible = "regulator-gpio"; + regulator-name = "SDHI1 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1>, <1800000 0>; + }; +}; + +&audio_clk1{ + clock-frequency = <11289600>; +}; + +&audio_clk2{ + clock-frequency = <12288000>; +}; + +&canfd { + pinctrl-0 = <&can0_pins &can1_pins>; + pinctrl-names = "default"; + status = "okay"; + + channel0 { + status = "okay"; + }; + + channel1 { + status = "okay"; + }; +}; + +&ehci0 { + dr_mode = "otg"; + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&hsusb { + dr_mode = "otg"; + status = "okay"; +}; + +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + + status = "okay"; + + wm8978: codec@1a { + compatible = "wlf,wm8978"; + #sound-dai-cells = <0>; + reg = <0x1a>; + }; }; -&extal_clk { - clock-frequency = <24000000>; +&ohci0 { + dr_mode = "otg"; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&phyrst { + status = "okay"; +}; + +&pinctrl { + pinctrl-0 = <&sound_clk_pins>; + pinctrl-names = "default"; + + can0_pins: can0 { + pinmux = <RZG2L_PORT_PINMUX(10, 1, 2)>, /* TX */ + <RZG2L_PORT_PINMUX(11, 0, 2)>; /* RX */ + }; + + /* SW7 should be at position 2->3 so that GPIO8_CAN0_STB line is activated */ + can0-stb { + gpio-hog; + gpios = <RZG2L_GPIO(42, 2) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "can0_stb"; + }; + + can1_pins: can1 { + pinmux = <RZG2L_PORT_PINMUX(12, 1, 2)>, /* TX */ + <RZG2L_PORT_PINMUX(13, 0, 2)>; /* RX */ + }; + + /* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */ + can1-stb { + gpio-hog; + gpios = <RZG2L_GPIO(42, 3) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "can1_stb"; + }; + + i2c0_pins: i2c0 { + pins = "RIIC0_SDA", "RIIC0_SCL"; + input-enable; + }; + + i2c1_pins: i2c1 { + pins = "RIIC1_SDA", "RIIC1_SCL"; + input-enable; + }; + + i2c3_pins: i2c3 { + pinmux = <RZG2L_PORT_PINMUX(18, 0, 3)>, /* SDA */ + <RZG2L_PORT_PINMUX(18, 1, 3)>; /* SCL */ + }; + + scif0_pins: scif0 { + pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>, /* TxD */ + <RZG2L_PORT_PINMUX(38, 1, 1)>; /* RxD */ + }; + + sd1-pwr-en-hog { + gpio-hog; + gpios = <RZG2L_GPIO(39, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "sd1_pwr_en"; + }; + + sdhi1_pins: sd1 { + sd1_data { + pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; + power-source = <3300>; + }; + + sd1_ctrl { + pins = "SD1_CLK", "SD1_CMD"; + power-source = <3300>; + }; + + sd1_mux { + pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */ + }; + }; + + sdhi1_pins_uhs: sd1_uhs { + sd1_data_uhs { + pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; + power-source = <1800>; + }; + + sd1_ctrl_uhs { + pins = "SD1_CLK", "SD1_CMD"; + power-source = <1800>; + }; + + sd1_mux_uhs { + pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */ + }; + }; + + sound_clk_pins: sound_clk { + pins = "AUDIO_CLK1", "AUDIO_CLK2"; + input-enable; + }; + + ssi0_pins: ssi0 { + pinmux = <RZG2L_PORT_PINMUX(45, 0, 1)>, /* BCK */ + <RZG2L_PORT_PINMUX(45, 1, 1)>, /* RCK */ + <RZG2L_PORT_PINMUX(45, 2, 1)>, /* TXD */ + <RZG2L_PORT_PINMUX(45, 3, 1)>; /* RXD */ + }; + + usb0_pins: usb0 { + pinmux = <RZG2L_PORT_PINMUX(4, 0, 1)>, /* VBUS */ + <RZG2L_PORT_PINMUX(5, 0, 1)>, /* OVC */ + <RZG2L_PORT_PINMUX(5, 1, 1)>; /* OTG_ID */ + }; + + usb1_pins: usb1 { + pinmux = <RZG2L_PORT_PINMUX(42, 0, 1)>, /* VBUS */ + <RZG2L_PORT_PINMUX(42, 1, 1)>; /* OVC */ + }; }; &scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhi1 { + pinctrl-0 = <&sdhi1_pins>; + pinctrl-1 = <&sdhi1_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <&vccq_sdhi1>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&ssi0 { + pinctrl-0 = <&ssi0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + vbus-supply = <&usb0_vbus_otg>; + status = "okay"; +}; + +&usb2_phy1 { + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index eb1f3b82300b..bf37777dca31 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -340,6 +340,8 @@ status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio2>; @@ -524,47 +526,49 @@ reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater", "infoframe", "cbus", "cec", "sdp", "txa", "txb" ; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&gpio6>; interrupt-names = "intrq1", "intrq2"; interrupts = <30 IRQ_TYPE_LEVEL_LOW>, <31 IRQ_TYPE_LEVEL_LOW>; - port@7 { - reg = <7>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; - adv7482_ain7: endpoint { - remote-endpoint = <&cvbs_con>; + adv7482_ain7: endpoint { + remote-endpoint = <&cvbs_con>; + }; }; - }; - port@8 { - reg = <8>; + port@8 { + reg = <8>; - adv7482_hdmi: endpoint { - remote-endpoint = <&hdmi_in_con>; + adv7482_hdmi: endpoint { + remote-endpoint = <&hdmi_in_con>; + }; }; - }; - port@a { - reg = <10>; + port@a { + reg = <10>; - adv7482_txa: endpoint { - clock-lanes = <0>; - data-lanes = <1 2 3 4>; - remote-endpoint = <&csi40_in>; + adv7482_txa: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi40_in>; + }; }; - }; - port@b { - reg = <11>; + port@b { + reg = <11>; - adv7482_txb: endpoint { - clock-lanes = <0>; - data-lanes = <1>; - remote-endpoint = <&csi20_in>; + adv7482_txb: endpoint { + clock-lanes = <0>; + data-lanes = <1>; + remote-endpoint = <&csi20_in>; + }; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 1f177af3eb9d..7edffe7f8cfa 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -154,6 +154,8 @@ status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio2>; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 7fdb41de01ec..479906f3ad7b 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -13,6 +13,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-lion-haikou.dtb @@ -24,6 +25,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-ficus.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-bob.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-scarlet-dumo.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-scarlet-inx.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-scarlet-kd.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-hugsun-x99.dtb @@ -42,8 +44,11 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinebook-pro.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-plus.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a-plus.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4b.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4b-plus.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4c.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2.dtb @@ -51,4 +56,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts index c1ce9c295e5b..848bc39cf86a 100644 --- a/arch/arm64/boot/dts/rockchip/px30-evb.dts +++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts @@ -114,6 +114,10 @@ cpu-supply = <&vdd_arm>; }; +&csi_dphy { + status = "okay"; +}; + &display_subsystem { status = "okay"; }; @@ -428,6 +432,36 @@ }; }; +&i2c2 { + status = "okay"; + + clock-frequency = <100000>; + + /* These are relatively safe rise/fall times; TODO: measure */ + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; + + ov5695: ov5695@36 { + compatible = "ovti,ov5695"; + reg = <0x36>; + avdd-supply = <&vcc2v8_dvp>; + clocks = <&cru SCLK_CIF_OUT>; + clock-names = "xvclk"; + dvdd-supply = <&vcc1v5_dvp>; + dovdd-supply = <&vcc1v8_dvp>; + pinctrl-names = "default"; + pinctrl-0 = <&cif_clkout_m0>; + reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; + + port { + ucam_out: endpoint { + remote-endpoint = <&mipi_in_ucam>; + data-lanes = <1 2>; + }; + }; + }; +}; + &i2s1_2ch { status = "okay"; }; @@ -443,6 +477,24 @@ vccio6-supply = <&vccio_flash>; }; +&isp { + status = "okay"; + + ports { + port@0 { + mipi_in_ucam: endpoint@0 { + reg = <0>; + data-lanes = <1 2>; + remote-endpoint = <&ucam_out>; + }; + }; + }; +}; + +&isp_mmu { + status = "okay"; +}; + &pinctrl { headphone { hp_det: hp-det { diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi index 248ebb61aa79..00f50b05d55a 100644 --- a/arch/arm64/boot/dts/rockchip/px30.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -110,7 +110,7 @@ }; }; - cpu0_opp_table: cpu0-opp-table { + cpu0_opp_table: opp-table-0 { compatible = "operating-points-v2"; opp-shared; @@ -864,6 +864,19 @@ status = "disabled"; }; + csi_dphy: phy@ff2f0000 { + compatible = "rockchip,px30-csi-dphy"; + reg = <0x0 0xff2f0000 0x0 0x4000>; + clocks = <&cru PCLK_MIPICSIPHY>; + clock-names = "pclk"; + #phy-cells = <0>; + power-domains = <&power PX30_PD_VI>; + resets = <&cru SRST_MIPICSIPHY_P>; + reset-names = "apb"; + rockchip,grf = <&grf>; + status = "disabled"; + }; + usb20_otg: usb@ff300000 { compatible = "rockchip,px30-usb", "rockchip,rk3066-usb", "snps,dwc2"; @@ -974,6 +987,18 @@ status = "disabled"; }; + sfc: spi@ff3a0000 { + compatible = "rockchip,sfc"; + reg = <0x0 0xff3a0000 0x0 0x4000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>; + clock-names = "clk_sfc", "hclk_sfc"; + pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus4>; + pinctrl-names = "default"; + power-domains = <&power PX30_PD_MMC_NAND>; + status = "disabled"; + }; + nfc: nand-controller@ff3b0000 { compatible = "rockchip,px30-nfc"; reg = <0x0 0xff3b0000 0x0 0x4000>; @@ -989,7 +1014,7 @@ status = "disabled"; }; - gpu_opp_table: opp-table2 { + gpu_opp_table: opp-table-1 { compatible = "operating-points-v2"; opp-200000000 { @@ -1024,6 +1049,28 @@ status = "disabled"; }; + vpu: video-codec@ff442000 { + compatible = "rockchip,px30-vpu"; + reg = <0x0 0xff442000 0x0 0x800>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "vepu", "vdpu"; + clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; + clock-names = "aclk", "hclk"; + iommus = <&vpu_mmu>; + power-domains = <&power PX30_PD_VPU>; + }; + + vpu_mmu: iommu@ff442800 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff442800 0x0 0x100>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; + clock-names = "aclk", "iface"; + #iommu-cells = <0>; + power-domains = <&power PX30_PD_VPU>; + }; + dsi: dsi@ff450000 { compatible = "rockchip,px30-mipi-dsi"; reg = <0x0 0xff450000 0x0 0x10000>; @@ -1142,6 +1189,47 @@ status = "disabled"; }; + isp: isp@ff4a0000 { + compatible = "rockchip,px30-cif-isp"; /*rk3326-rkisp1*/ + reg = <0x0 0xff4a0000 0x0 0x8000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "isp", "mi", "mipi"; + clocks = <&cru SCLK_ISP>, + <&cru ACLK_ISP>, + <&cru HCLK_ISP>, + <&cru PCLK_ISP>; + clock-names = "isp", "aclk", "hclk", "pclk"; + iommus = <&isp_mmu>; + phys = <&csi_dphy>; + phy-names = "dphy"; + power-domains = <&power PX30_PD_VI>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + + isp_mmu: iommu@ff4a8000 { + compatible = "rockchip,iommu"; + reg = <0x0 0xff4a8000 0x0 0x100>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_ISP>, <&cru HCLK_ISP>; + clock-names = "aclk", "iface"; + power-domains = <&power PX30_PD_VI>; + rockchip,disable-mmu-reset; + #iommu-cells = <0>; + }; + qos_gmac: qos@ff518000 { compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff518000 0x0 0x20>; @@ -1250,7 +1338,7 @@ #size-cells = <2>; ranges; - gpio0: gpio0@ff040000 { + gpio0: gpio@ff040000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff040000 0x0 0x100>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; @@ -1262,7 +1350,7 @@ #interrupt-cells = <2>; }; - gpio1: gpio1@ff250000 { + gpio1: gpio@ff250000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff250000 0x0 0x100>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; @@ -1274,7 +1362,7 @@ #interrupt-cells = <2>; }; - gpio2: gpio2@ff260000 { + gpio2: gpio@ff260000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff260000 0x0 0x100>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; @@ -1286,7 +1374,7 @@ #interrupt-cells = <2>; }; - gpio3: gpio3@ff270000 { + gpio3: gpio@ff270000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff270000 0x0 0x100>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; @@ -1973,6 +2061,32 @@ }; }; + sfc { + sfc_bus4: sfc-bus4 { + rockchip,pins = + <1 RK_PA0 3 &pcfg_pull_none>, + <1 RK_PA1 3 &pcfg_pull_none>, + <1 RK_PA2 3 &pcfg_pull_none>, + <1 RK_PA3 3 &pcfg_pull_none>; + }; + + sfc_bus2: sfc-bus2 { + rockchip,pins = + <1 RK_PA0 3 &pcfg_pull_none>, + <1 RK_PA1 3 &pcfg_pull_none>; + }; + + sfc_cs0: sfc-cs0 { + rockchip,pins = + <1 RK_PA4 3 &pcfg_pull_none>; + }; + + sfc_clk: sfc-clk { + rockchip,pins = + <1 RK_PB1 3 &pcfg_pull_none>; + }; + }; + lcdc { lcdc_rgb_dclk_pin: lcdc-rgb-dclk-pin { rockchip,pins = diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi index a185901aba9a..1cbe2126186e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi @@ -99,7 +99,7 @@ }; }; - cpu0_opp_table: cpu0-opp-table { + cpu0_opp_table: opp-table-0 { compatible = "operating-points-v2"; opp-shared; @@ -731,6 +731,17 @@ status = "disabled"; }; + sfc: spi@ff4c0000 { + compatible = "rockchip,sfc"; + reg = <0x0 0xff4c0000 0x0 0x4000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>; + clock-names = "clk_sfc", "hclk_sfc"; + pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus4>; + pinctrl-names = "default"; + status = "disabled"; + }; + cru: clock-controller@ff500000 { compatible = "rockchip,rk3308-cru"; reg = <0x0 0xff500000 0x0 0x1000>; @@ -779,7 +790,7 @@ #size-cells = <2>; ranges; - gpio0: gpio0@ff220000 { + gpio0: gpio@ff220000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff220000 0x0 0x100>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; @@ -790,7 +801,7 @@ #interrupt-cells = <2>; }; - gpio1: gpio1@ff230000 { + gpio1: gpio@ff230000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff230000 0x0 0x100>; interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; @@ -801,7 +812,7 @@ #interrupt-cells = <2>; }; - gpio2: gpio2@ff240000 { + gpio2: gpio@ff240000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff240000 0x0 0x100>; interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; @@ -812,7 +823,7 @@ #interrupt-cells = <2>; }; - gpio3: gpio3@ff250000 { + gpio3: gpio@ff250000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff250000 0x0 0x100>; interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; @@ -823,7 +834,7 @@ #interrupt-cells = <2>; }; - gpio4: gpio4@ff260000 { + gpio4: gpio@ff260000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff260000 0x0 0x100>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; @@ -1004,6 +1015,32 @@ }; }; + sfc { + sfc_bus4: sfc-bus4 { + rockchip,pins = + <3 RK_PA0 3 &pcfg_pull_none>, + <3 RK_PA1 3 &pcfg_pull_none>, + <3 RK_PA2 3 &pcfg_pull_none>, + <3 RK_PA3 3 &pcfg_pull_none>; + }; + + sfc_bus2: sfc-bus2 { + rockchip,pins = + <3 RK_PA0 3 &pcfg_pull_none>, + <3 RK_PA1 3 &pcfg_pull_none>; + }; + + sfc_cs0: sfc-cs0 { + rockchip,pins = + <3 RK_PA4 3 &pcfg_pull_none>; + }; + + sfc_clk: sfc-clk { + rockchip,pins = + <3 RK_PA5 3 &pcfg_pull_none>; + }; + }; + gmac { rmii_pins: rmii-pins { rockchip,pins = diff --git a/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts index 763cf9b4620e..43c928ac98f0 100644 --- a/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts @@ -185,7 +185,6 @@ assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>; assigned-clock-rate = <50000000>; assigned-clocks = <&cru SCLK_MAC2PHY>; - clock_in_out = "output"; status = "okay"; }; @@ -194,8 +193,6 @@ }; &hdmi { - ddc-i2c-scl-high-time-ns = <9625>; - ddc-i2c-scl-low-time-ns = <10000>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts index 7fc674a99a6c..ea0695b51ecd 100644 --- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts @@ -207,7 +207,8 @@ gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-always-on; - vin-supply = <&vccsys>; + regulator-boot-on; + vin-supply = <&usb_midu>; }; }; @@ -311,6 +312,7 @@ vcc5-supply = <&vccsys>; vcc6-supply = <&vccsys>; vcc7-supply = <&vccsys>; + vcc8-supply = <&vccsys>; regulators { vdd_logic: DCDC_REG1 { @@ -460,6 +462,14 @@ regulator-suspend-microvolt = <3000000>; }; }; + + usb_midu: BOOST { + regulator-name = "usb_midu"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5400000>; + regulator-always-on; + regulator-boot-on; + }; }; rk817_codec: codec { @@ -517,6 +527,22 @@ status = "okay"; }; +&sfc { + pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <108000000>; + spi-rx-bus-width = <2>; + spi-tx-bus-width = <1>; + }; +}; + &tsadc { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts new file mode 100644 index 000000000000..e3e3984d01d4 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts @@ -0,0 +1,110 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2021 T-Chip Intelligent Technology Co., Ltd + +/dts-v1/; + +#include <dt-bindings/input/input.h> + +#include "rk3328-roc-cc.dts" + +/ { + model = "Firefly ROC-RK3328-PC"; + compatible = "firefly,roc-rk3328-pc", "rockchip,rk3328"; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1750000>; + + /* This button is unpopulated out of the factory. */ + button-recovery { + label = "Recovery"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <10000>; + }; + }; + + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>; + linux,rc-map-name = "rc-khadas"; + pinctrl-names = "default"; + pinctrl-0 = <&ir_int>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_en>, <&wifi_host_wake>; + reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; + }; +}; + +&codec { + mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>; +}; + +&gpu { + mali-supply = <&vdd_logic>; +}; + +&pinctrl { + ir { + ir_int: ir-int { + rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdmmcio { + sdio_per_pin: sdio-per-pin { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + wifi { + wifi_en: wifi-en { + rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_host_wake: wifi-host-wake { + rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none_4ma>; + }; + + bt_rst: bt-rst { + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_en: bt-en { + rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmic_int_l { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; +}; + +&rk805 { + interrupt-parent = <&gpio0>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; +}; + +&saradc { + vref-supply = <&vcc_18>; + status = "okay"; +}; + +&usb20_host_drv { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; +}; + +&vcc_host1_5v { + gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; +}; + +&vcc_sdio { + gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sdio_per_pin>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts index 1b0f7e4551ea..f69a38f42d2d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts @@ -345,7 +345,7 @@ &spi0 { status = "okay"; - spiflash@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 8c821acb21ff..39db0b85b4da 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -105,7 +105,7 @@ }; }; - cpu0_opp_table: opp_table0 { + cpu0_opp_table: opp-table-0 { compatible = "operating-points-v2"; opp-shared; @@ -599,7 +599,7 @@ gpu: gpu@ff300000 { compatible = "rockchip,rk3328-mali", "arm,mali-450"; - reg = <0x0 0xff300000 0x0 0x40000>; + reg = <0x0 0xff300000 0x0 0x30000>; interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, @@ -623,7 +623,6 @@ compatible = "rockchip,iommu"; reg = <0x0 0xff330200 0 0x100>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "h265e_mmu"; clocks = <&cru ACLK_H265>, <&cru PCLK_H265>; clock-names = "aclk", "iface"; #iommu-cells = <0>; @@ -634,7 +633,6 @@ compatible = "rockchip,iommu"; reg = <0x0 0xff340800 0x0 0x40>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "vepu_mmu"; clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; clock-names = "aclk", "iface"; #iommu-cells = <0>; @@ -656,7 +654,6 @@ compatible = "rockchip,iommu"; reg = <0x0 0xff350800 0x0 0x40>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "vpu_mmu"; clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; clock-names = "aclk", "iface"; #iommu-cells = <0>; @@ -667,7 +664,6 @@ compatible = "rockchip,iommu"; reg = <0x0 0xff360480 0x0 0x40>, <0x0 0xff3604c0 0x0 0x40>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "rkvdec_mmu"; clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>; clock-names = "aclk", "iface"; #iommu-cells = <0>; @@ -700,7 +696,6 @@ compatible = "rockchip,iommu"; reg = <0x0 0xff373f00 0x0 0x100>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "vop_mmu"; clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; clock-names = "aclk", "iface"; #iommu-cells = <0>; @@ -1019,7 +1014,7 @@ #size-cells = <2>; ranges; - gpio0: gpio0@ff210000 { + gpio0: gpio@ff210000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff210000 0x0 0x100>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; @@ -1032,7 +1027,7 @@ #interrupt-cells = <2>; }; - gpio1: gpio1@ff220000 { + gpio1: gpio@ff220000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff220000 0x0 0x100>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; @@ -1045,7 +1040,7 @@ #interrupt-cells = <2>; }; - gpio2: gpio2@ff230000 { + gpio2: gpio@ff230000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff230000 0x0 0x100>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; @@ -1058,7 +1053,7 @@ #interrupt-cells = <2>; }; - gpio3: gpio3@ff240000 { + gpio3: gpio@ff240000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff240000 0x0 0x100>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi index bcd7977fb0f8..5753e57fd716 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi @@ -29,15 +29,15 @@ i2c-parent = <&i2c1>; mux-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>; - /* Q7_GPO_I2C */ - i2c@0 { + /* Q7_GP0_I2C */ + i2c_gp0: i2c@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; }; /* Q7_SMB */ - i2c@1 { + i2c_smb: i2c@1 { reg = <1>; #address-cells = <1>; #size-cells = <0>; @@ -52,7 +52,7 @@ mux-gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>; /* Q7_LVDS_BLC_I2C */ - i2c@0 { + i2c_lvds_blc: i2c@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; @@ -69,8 +69,8 @@ }; }; - /* Q7_GP2_I2C */ - i2c@1 { + /* Q7_GP2_I2C = LVDS_DID_CLK/DAT */ + i2c_gp2: i2c@1 { reg = <1>; #address-cells = <1>; #size-cells = <0>; @@ -144,7 +144,7 @@ mmc-hs200-1_8v; non-removable; vmmc-supply = <&vcc33_io>; - vqmmc-supply = <&vcc18_io>; + vqmmc-supply = <&vcc_18>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>; status = "okay"; @@ -238,13 +238,6 @@ regulator-boot-on; }; - vcc18_io: LDO_REG4 { - regulator-name = "vcc18_io"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - }; - vdd10_video: LDO_REG6 { regulator-name = "vdd10_video"; regulator-min-microvolt = <1000000>; @@ -253,6 +246,14 @@ regulator-boot-on; }; + vcc_18: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_18"; + }; + vcc18_video: LDO_REG8 { regulator-name = "vcc18_video"; regulator-min-microvolt = <1800000>; @@ -272,6 +273,18 @@ status = "okay"; }; +/* The RK3368-uQ7 "Lion" has most IO voltages hardwired to 3.3V. */ +&io_domains { + audio-supply = <&vcc33_io>; + dvp-supply = <&vcc33_io>; + flash0-supply = <&vcc_18>; + gpio30-supply = <&vcc33_io>; + gpio1830-supply = <&vcc33_io>; + sdcard-supply = <&vcc33_io>; + wifi-supply = <&vcc33_io>; + status = "okay"; +}; + &pinctrl { leds { module_led_pins: module-led-pins { @@ -291,6 +304,12 @@ }; }; +&pmu_io_domains { + pmu-supply = <&vcc33_io>; + vop-supply = <&vcc33_io>; + status = "okay"; +}; + &spi1 { status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index 4c64fbefb483..c99da90328e9 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/power/rk3368-power.h> #include <dt-bindings/soc/rockchip,boot-mode.h> #include <dt-bindings/thermal/thermal.h> @@ -615,6 +616,115 @@ status = "disabled"; }; + pmu: power-management@ff730000 { + compatible = "rockchip,rk3368-pmu", "syscon", "simple-mfd"; + reg = <0x0 0xff730000 0x0 0x1000>; + + power: power-controller { + compatible = "rockchip,rk3368-power-controller"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + /* + * Note: Although SCLK_* are the working clocks + * of device without including on the NOC, needed for + * synchronous reset. + * + * The clocks on the which NOC: + * ACLK_IEP/ACLK_VIP/ACLK_VOP0 are on ACLK_VIO0_NIU. + * ACLK_ISP/ACLK_VOP1 are on ACLK_VIO1_NIU. + * ACLK_RGA is on ACLK_RGA_NIU. + * The others (HCLK_*,PLCK_*) are on HCLK_VIO_NIU. + * + * Which clock are device clocks: + * clocks devices + * *_IEP IEP:Image Enhancement Processor + * *_ISP ISP:Image Signal Processing + * *_VIP VIP:Video Input Processor + * *_VOP* VOP:Visual Output Processor + * *_RGA RGA + * *_EDP* EDP + * *_DPHY* LVDS + * *_HDMI HDMI + * *_MIPI_* MIPI + */ + power-domain@RK3368_PD_VIO { + reg = <RK3368_PD_VIO>; + clocks = <&cru ACLK_IEP>, + <&cru ACLK_ISP>, + <&cru ACLK_VIP>, + <&cru ACLK_RGA>, + <&cru ACLK_VOP>, + <&cru ACLK_VOP_IEP>, + <&cru DCLK_VOP>, + <&cru HCLK_IEP>, + <&cru HCLK_ISP>, + <&cru HCLK_RGA>, + <&cru HCLK_VIP>, + <&cru HCLK_VOP>, + <&cru HCLK_VIO_HDCPMMU>, + <&cru PCLK_EDP_CTRL>, + <&cru PCLK_HDMI_CTRL>, + <&cru PCLK_HDCP>, + <&cru PCLK_ISP>, + <&cru PCLK_VIP>, + <&cru PCLK_DPHYRX>, + <&cru PCLK_DPHYTX0>, + <&cru PCLK_MIPI_CSI>, + <&cru PCLK_MIPI_DSI0>, + <&cru SCLK_VOP0_PWM>, + <&cru SCLK_EDP_24M>, + <&cru SCLK_EDP>, + <&cru SCLK_HDCP>, + <&cru SCLK_ISP>, + <&cru SCLK_RGA>, + <&cru SCLK_HDMI_CEC>, + <&cru SCLK_HDMI_HDCP>; + pm_qos = <&qos_iep>, + <&qos_isp_r0>, + <&qos_isp_r1>, + <&qos_isp_w0>, + <&qos_isp_w1>, + <&qos_vip>, + <&qos_vop>, + <&qos_rga_r>, + <&qos_rga_w>; + #power-domain-cells = <0>; + }; + + /* + * Note: ACLK_VCODEC/HCLK_VCODEC are VCODEC + * (video endecoder & decoder) clocks that on the + * ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC). + */ + power-domain@RK3368_PD_VIDEO { + reg = <RK3368_PD_VIDEO>; + clocks = <&cru ACLK_VIDEO>, + <&cru HCLK_VIDEO>, + <&cru SCLK_HEVC_CABAC>, + <&cru SCLK_HEVC_CORE>; + pm_qos = <&qos_hevc_r>, + <&qos_vpu_r>, + <&qos_vpu_w>; + #power-domain-cells = <0>; + }; + + /* + * Note: ACLK_GPU is the GPU clock, + * and on the ACLK_GPU_NIU (NOC). + */ + power-domain@RK3368_PD_GPU_1 { + reg = <RK3368_PD_GPU_1>; + clocks = <&cru ACLK_GPU_CFG>, + <&cru ACLK_GPU_MEM>, + <&cru SCLK_GPU_CORE>; + pm_qos = <&qos_gpu>; + #power-domain-cells = <0>; + }; + }; + }; + pmugrf: syscon@ff738000 { compatible = "rockchip,rk3368-pmugrf", "syscon", "simple-mfd"; reg = <0x0 0xff738000 0x0 0x1000>; @@ -709,9 +819,9 @@ compatible = "rockchip,iommu"; reg = <0x0 0xff900800 0x0 0x100>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "iep_mmu"; clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>; clock-names = "aclk", "iface"; + power-domains = <&power RK3368_PD_VIO>; #iommu-cells = <0>; status = "disabled"; }; @@ -721,10 +831,10 @@ reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "isp_mmu"; clocks = <&cru ACLK_ISP>, <&cru HCLK_ISP>; clock-names = "aclk", "iface"; #iommu-cells = <0>; + power-domains = <&power RK3368_PD_VIO>; rockchip,disable-mmu-reset; status = "disabled"; }; @@ -733,9 +843,9 @@ compatible = "rockchip,iommu"; reg = <0x0 0xff930300 0x0 0x100>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "vop_mmu"; clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; clock-names = "aclk", "iface"; + power-domains = <&power RK3368_PD_VIO>; #iommu-cells = <0>; status = "disabled"; }; @@ -745,7 +855,6 @@ reg = <0x0 0xff9a0440 0x0 0x40>, <0x0 0xff9a0480 0x0 0x40>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hevc_mmu"; clocks = <&cru ACLK_VIDEO>, <&cru HCLK_VIDEO>; clock-names = "aclk", "iface"; #iommu-cells = <0>; @@ -757,13 +866,77 @@ reg = <0x0 0xff9a0800 0x0 0x100>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "vepu_mmu", "vdpu_mmu"; clocks = <&cru ACLK_VIDEO>, <&cru HCLK_VIDEO>; clock-names = "aclk", "iface"; #iommu-cells = <0>; status = "disabled"; }; + qos_iep: qos@ffad0000 { + compatible = "rockchip,rk3368-qos", "syscon"; + reg = <0x0 0xffad0000 0x0 0x20>; + }; + + qos_isp_r0: qos@ffad0080 { + compatible = "rockchip,rk3368-qos", "syscon"; + reg = <0x0 0xffad0080 0x0 0x20>; + }; + + qos_isp_r1: qos@ffad0100 { + compatible = "rockchip,rk3368-qos", "syscon"; + reg = <0x0 0xffad0100 0x0 0x20>; + }; + + qos_isp_w0: qos@ffad0180 { + compatible = "rockchip,rk3368-qos", "syscon"; + reg = <0x0 0xffad0180 0x0 0x20>; + }; + + qos_isp_w1: qos@ffad0200 { + compatible = "rockchip,rk3368-qos", "syscon"; + reg = <0x0 0xffad0200 0x0 0x20>; + }; + + qos_vip: qos@ffad0280 { + compatible = "rockchip,rk3368-qos", "syscon"; + reg = <0x0 0xffad0280 0x0 0x20>; + }; + + qos_vop: qos@ffad0300 { + compatible = "rockchip,rk3368-qos", "syscon"; + reg = <0x0 0xffad0300 0x0 0x20>; + }; + + qos_rga_r: qos@ffad0380 { + compatible = "rockchip,rk3368-qos", "syscon"; + reg = <0x0 0xffad0380 0x0 0x20>; + }; + + qos_rga_w: qos@ffad0400 { + compatible = "rockchip,rk3368-qos", "syscon"; + reg = <0x0 0xffad0400 0x0 0x20>; + }; + + qos_hevc_r: qos@ffae0000 { + compatible = "rockchip,rk3368-qos", "syscon"; + reg = <0x0 0xffae0000 0x0 0x20>; + }; + + qos_vpu_r: qos@ffae0100 { + compatible = "rockchip,rk3368-qos", "syscon"; + reg = <0x0 0xffae0100 0x0 0x20>; + }; + + qos_vpu_w: qos@ffae0180 { + compatible = "rockchip,rk3368-qos", "syscon"; + reg = <0x0 0xffae0180 0x0 0x20>; + }; + + qos_gpu: qos@ffaf0000 { + compatible = "rockchip,rk3368-qos", "syscon"; + reg = <0x0 0xffaf0000 0x0 0x20>; + }; + efuse256: efuse@ffb00000 { compatible = "rockchip,rk3368-efuse"; reg = <0x0 0xffb00000 0x0 0x20>; @@ -802,7 +975,7 @@ #size-cells = <0x2>; ranges; - gpio0: gpio0@ff750000 { + gpio0: gpio@ff750000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff750000 0x0 0x100>; clocks = <&cru PCLK_GPIO0>; @@ -815,7 +988,7 @@ #interrupt-cells = <0x2>; }; - gpio1: gpio1@ff780000 { + gpio1: gpio@ff780000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff780000 0x0 0x100>; clocks = <&cru PCLK_GPIO1>; @@ -828,7 +1001,7 @@ #interrupt-cells = <0x2>; }; - gpio2: gpio2@ff790000 { + gpio2: gpio@ff790000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff790000 0x0 0x100>; clocks = <&cru PCLK_GPIO2>; @@ -841,7 +1014,7 @@ #interrupt-cells = <0x2>; }; - gpio3: gpio3@ff7a0000 { + gpio3: gpio@ff7a0000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff7a0000 0x0 0x100>; clocks = <&cru PCLK_GPIO3>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts index e6c1c94c8d69..31ebb4e5fd33 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts @@ -16,6 +16,7 @@ "google,bob-rev7", "google,bob-rev6", "google,bob-rev5", "google,bob-rev4", "google,bob", "google,gru", "rockchip,rk3399"; + chassis-type = "convertible"; edp_panel: edp-panel { compatible = "boe,nv101wxmn51"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi index 1384dabbdf40..9b2c679f5eca 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi @@ -251,6 +251,182 @@ }; }; +&gpio0 { + gpio-line-names = /* GPIO0 A 0-7 */ + "AP_RTC_CLK_IN", + "EC_AP_INT_L", + "PP1800_AUDIO_EN", + "BT_HOST_WAKE_L", + "WLAN_MODULE_PD_L", + "H1_INT_OD_L", + "CENTERLOGIC_DVS_PWM", + "", + + /* GPIO0 B 0-4 */ + "WIFI_HOST_WAKE_L", + "PMUIO2_33_18_L", + "PP1500_EN", + "AP_EC_WARM_RESET_REQ", + "PP3000_EN"; +}; + +&gpio1 { + gpio-line-names = /* GPIO1 A 0-7 */ + "", + "", + "SPK_PA_EN", + "", + "TRACKPAD_INT_L", + "AP_EC_S3_S0_L", + "AP_EC_OVERTEMP", + "AP_SPI_FLASH_MISO", + + /* GPIO1 B 0-7 */ + "AP_SPI_FLASH_MOSI_R", + "AP_SPI_FLASH_CLK_R", + "AP_SPI_FLASH_CS_L_R", + "WLAN_MODULE_RESET_L", + "WIFI_DISABLE_L", + "MIC_INT", + "", + "AP_I2C_DVS_SDA", + + /* GPIO1 C 0-7 */ + "AP_I2C_DVS_SCL", + "AP_BL_EN", + /* + * AP_FLASH_WP is crossystem ABI. Schematics call it + * AP_FW_WP or CPU1_FW_WP, depending on the variant. + */ + "AP_FLASH_WP", + "LITCPU_DVS_PWM", + "AP_I2C_AUDIO_SDA", + "AP_I2C_AUDIO_SCL", + "", + "HEADSET_INT_L"; +}; + +&gpio2 { + gpio-line-names = /* GPIO2 A 0-7 */ + "", + "", + "SD_IO_PWR_EN", + "", + "", + "", + "", + "", + + /* GPIO2 B 0-7 */ + "", + "", + "", + "", + "", + "", + "", + "", + + /* GPIO2 C 0-7 */ + "", + "", + "", + "", + "AP_SPI_EC_MISO", + "AP_SPI_EC_MOSI", + "AP_SPI_EC_CLK", + "AP_SPI_EC_CS_L", + + /* GPIO2 D 0-4 */ + "BT_DEV_WAKE_L", + "", + "WIFI_PCIE_CLKREQ_L", + "WIFI_PERST_L", + "SD_PWR_3000_1800_L"; +}; + +&gpio3 { + gpio-line-names = /* GPIO3 A 0-7 */ + "", + "", + "", + "", + "AP_SPI_TPM_MISO", + "AP_SPI_TPM_MOSI_R", + "AP_SPI_TPM_CLK_R", + "AP_SPI_TPM_CS_L_R", + + /* GPIO3 B 0-7 */ + "EC_IN_RW", + "", + "AP_I2C_TP_SDA", + "AP_I2C_TP_SCL", + "AP_I2C_TP_PU_EN", + "TOUCH_INT_L", + "", + "", + + /* GPIO3 C 0-7 */ + "", + "", + "", + "", + "", + "", + "", + "", + + /* GPIO3 D 0-7 */ + "I2S0_SCLK", + "I2S0_LRCK_RX", + "I2S0_LRCK_TX", + "I2S0_SDI_0", + "I2S0_SDI_1", + "", + "I2S0_SDO_1", + "I2S0_SDO_0"; +}; + +&gpio4 { + gpio-line-names = /* GPIO4 A 0-7 */ + "I2S_MCLK", + "AP_I2C_MIC_SDA", + "AP_I2C_MIC_SCL", + "", + "", + "", + "", + "", + + /* GPIO4 B 0-7 */ + "", + "", + "", + "", + "", + "", + "", + "", + + /* GPIO4 C 0-7 */ + "AP_I2C_TS_SDA", + "AP_I2C_TS_SCL", + "GPU_DVS_PWM", + "UART_DBG_TX_AP_RX", + "UART_AP_TX_DBG_RX", + "", + "BIGCPU_DVS_PWM", + "EDP_HPD_3V0", + + /* GPIO4 D 0-5 */ + "SD_CARD_DET_L", + "USB_DP_HPD", + "TOUCH_RESET_L", + "PP3300_DISP_EN", + "", + "SD_SLOT_PWR_EN"; +}; + ap_i2c_mic: &i2c1 { status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts index 2bbef9fcbe27..6863689df06f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts @@ -24,6 +24,7 @@ "google,kevin-rev9", "google,kevin-rev8", "google,kevin-rev7", "google,kevin-rev6", "google,kevin", "google,gru", "rockchip,rk3399"; + chassis-type = "convertible"; /* Power tree */ diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts new file mode 100644 index 000000000000..853e88455e75 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Gru-Scarlet Rev5+ (SKU-0) board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "rk3399-gru-scarlet.dtsi" + +/ { + model = "Google Scarlet"; + compatible = "google,scarlet-rev15-sku0", "google,scarlet-rev15", + "google,scarlet-rev14-sku0", "google,scarlet-rev14", + "google,scarlet-rev13-sku0", "google,scarlet-rev13", + "google,scarlet-rev12-sku0", "google,scarlet-rev12", + "google,scarlet-rev11-sku0", "google,scarlet-rev11", + "google,scarlet-rev10-sku0", "google,scarlet-rev10", + "google,scarlet-rev9-sku0", "google,scarlet-rev9", + "google,scarlet-rev8-sku0", "google,scarlet-rev8", + "google,scarlet-rev7-sku0", "google,scarlet-rev7", + "google,scarlet-rev6-sku0", "google,scarlet-rev6", + "google,scarlet-rev5-sku0", "google,scarlet-rev5", + "google,scarlet", "google,gru", "rockchip,rk3399"; +}; + +&mipi_panel { + compatible = "innolux,p097pfg"; + avdd-supply = <&ppvarp_lcd>; + avee-supply = <&ppvarn_lcd>; +}; + +&pci_rootport { + wifi@0,0 { + compatible = "qcom,ath10k"; + reg = <0x00010000 0x0 0x00000000 0x0 0x00000000>, + <0x03010010 0x0 0x00000000 0x0 0x00200000>; + qcom,ath10k-calibration-variant = "GO_DUMO"; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi index 5d7a9d96d163..a9817b3d7edc 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi @@ -8,6 +8,8 @@ #include "rk3399-gru.dtsi" /{ + chassis-type = "tablet"; + /* Power tree */ /* ppvar_sys children, sorted by name */ @@ -389,6 +391,186 @@ camera: &i2c7 { <400000000>; }; +&gpio0 { + gpio-line-names = /* GPIO0 A 0-7 */ + "CLK_32K_AP", + "EC_IN_RW_OD", + "SPK_PA_EN", + "WLAN_PERST_1V8_L", + "WLAN_PD_1V8_L", + "WLAN_RF_KILL_1V8_L", + "BIGCPU_DVS_PWM", + "SD_CD_L_JTAG_EN", + + /* GPIO0 B 0-5 */ + "BT_EN_BT_RF_KILL_1V8_L", + "PMUIO2_33_18_L_PP3300_S0_EN", + "TOUCH_RESET_L", + "AP_EC_WARM_RESET_REQ", + "PEN_RESET_L", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics call + * it AP_FLASH_WP_R_ODL. + */ + "AP_FLASH_WP_L"; +}; + +&gpio1 { + gpio-line-names = /* GPIO1 A 0-7 */ + "PEN_INT_ODL", + "PEN_EJECT_ODL", + "BT_HOST_WAKE_1V8_L", + "WLAN_HOST_WAKE_1V8_L", + "TOUCH_INT_ODL", + "AP_EC_S3_S0_L", + "AP_EC_OVERTEMP", + "AP_SPI_FLASH_MISO", + + /* GPIO1 B 0-7 */ + "AP_SPI_FLASH_MOSI_R", + "AP_SPI_FLASH_CLK_R", + "AP_SPI_FLASH_CS_L_R", + "SD_CARD_DET_ODL", + "", + "AP_EXPANSION_IO1", + "AP_EXPANSION_IO2", + "AP_I2C_DISP_SDA", + + /* GPIO1 C 0-7 */ + "AP_I2C_DISP_SCL", + "H1_INT_ODL", + "EC_AP_INT_ODL", + "LITCPU_DVS_PWM", + "AP_I2C_AUDIO_SDA", + "AP_I2C_AUDIO_SCL", + "AP_EXPANSION_IO3", + "HEADSET_INT_ODL", + + /* GPIO1 D0 */ + "AP_EXPANSION_IO4"; +}; + +&gpio2 { + gpio-line-names = /* GPIO2 A 0-7 */ + "AP_I2C_PEN_SDA", + "AP_I2C_PEN_SCL", + "SD_IO_PWR_EN", + "UCAM_RST_L", + "PP1250_CAM_EN", + "WCAM_RST_L", + "AP_EXPANSION_IO5", + "AP_I2C_CAM_SDA", + + /* GPIO2 B 0-7 */ + "AP_I2C_CAM_SCL", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "", + "", + + /* GPIO2 C 0-7 */ + "UART_EXPANSION_TX_AP_RX", + "UART_AP_TX_EXPANSION_RX", + "UART_EXPANSION_RTS_AP_CTS", + "UART_AP_RTS_EXPANSION_CTS", + "AP_SPI_EC_MISO", + "AP_SPI_EC_MOSI", + "AP_SPI_EC_CLK", + "AP_SPI_EC_CS_L", + + /* GPIO2 D 0-4 */ + "PP2800_CAM_EN", + "CLK_24M_CAM", + "WLAN_PCIE_CLKREQ_1V8_L", + "", + "SD_PWR_3000_1800_L"; +}; + +&gpio3 { + gpio-line-names = /* GPIO3 A 0-7 */ + "", + "", + "", + "", + "", + "", + "", + "", + + /* GPIO3 B 0-7 */ + "", + "", + "", + "", + "", + "", + "", + "", + + /* GPIO3 C 0-7 */ + "", + "", + "", + "", + "", + "", + "", + "", + + /* GPIO3 D 0-7 */ + "I2S0_SCLK", + "I2S0_LRCK_RX", + "I2S0_LRCK_TX", + "I2S0_SDI_0", + "STRAP_LCDBIAS_L", + "STRAP_FEATURE_1", + "STRAP_FEATURE_2", + "I2S0_SDO_0"; +}; + +&gpio4 { + gpio-line-names = /* GPIO4 A 0-7 */ + "I2S_MCLK", + "AP_I2C_EXPANSION_SDA", + "AP_I2C_EXPANSION_SCL", + "DMIC_EN", + "", + "", + "", + "", + + /* GPIO4 B 0-7 */ + "", + "", + "", + "", + "", + "", + "", + "", + + /* GPIO4 C 0-7 */ + "AP_I2C_TS_SDA", + "AP_I2C_TS_SCL", + "GPU_DVS_PWM", + "UART_DBG_TX_AP_RX", + "UART_AP_TX_DBG_RX", + "BL_EN", + "BL_PWM", + "", + + /* GPIO4 D 0-5 */ + "", + "DISPLAY_RST_L", + "", + "PPVARP_LCD_EN", + "PPVARN_LCD_EN", + "SD_SLOT_PWR_EN"; +}; + &i2c_tunnel { google,remote-bus = <0>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi index c1bcc8ca3769..45a5ae5d2027 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi @@ -461,7 +461,7 @@ ap_i2c_audio: &i2c8 { vpcie0v9-supply = <&pp900_pcie>; pci_rootport: pcie@0,0 { - reg = <0x83000000 0x0 0x00000000 0x0 0x00000000>; + reg = <0x0000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; ranges; @@ -543,7 +543,7 @@ ap_i2c_audio: &i2c8 { pinctrl-names = "default", "sleep"; pinctrl-1 = <&spi1_sleep>; - spiflash@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts index 738cfd21df3e..63c7681843da 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts @@ -21,6 +21,9 @@ aliases { mmc0 = &sdmmc; mmc1 = &sdhci; + spi1 = &spi1; + spi2 = &spi2; + spi5 = &spi5; }; avdd_0v9_s0: avdd-0v9-s0 { @@ -43,6 +46,10 @@ vin-supply = <&vcc3v3_sys_s3>; }; + chosen { + stdout-path = "serial2:1500000n8"; + }; + clkin_gmac: external-gmac-clock { compatible = "fixed-clock"; clock-frequency = <125000000>; @@ -469,11 +476,40 @@ status = "okay"; }; +&spi1 { + status = "okay"; + + spiflash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <25000000>; + status = "okay"; + m25p,fast-read; + }; +}; + +/* UEXT connector */ +&spi2 { + status = "okay"; +}; + +&spi5 { + status = "okay"; +}; + &tcphy1 { /* phy for &usbdrd_dwc3_1 */ status = "okay"; }; +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + &u2phy1 { status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi index 69cc9b05baa5..2180e0f75003 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi @@ -4,7 +4,7 @@ */ / { - cluster0_opp: opp-table0 { + cluster0_opp: opp-table-0 { compatible = "operating-points-v2"; opp-shared; @@ -39,7 +39,7 @@ }; }; - cluster1_opp: opp-table1 { + cluster1_opp: opp-table-1 { compatible = "operating-points-v2"; opp-shared; @@ -82,7 +82,7 @@ }; }; - gpu_opp_table: opp-table2 { + gpu_opp_table: opp-table-2 { compatible = "operating-points-v2"; opp00 { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi index da41cd81ebb7..fee5e7111279 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi @@ -4,7 +4,7 @@ */ / { - cluster0_opp: opp-table0 { + cluster0_opp: opp-table-0 { compatible = "operating-points-v2"; opp-shared; @@ -35,7 +35,7 @@ }; }; - cluster1_opp: opp-table1 { + cluster1_opp: opp-table-1 { compatible = "operating-points-v2"; opp-shared; @@ -74,7 +74,7 @@ }; }; - gpu_opp_table: opp-table2 { + gpu_opp_table: opp-table-2 { compatible = "operating-points-v2"; opp00 { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts index 2b5f001ff4a6..c2f021a1a18f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts @@ -17,6 +17,7 @@ / { model = "Pine64 Pinebook Pro"; compatible = "pine64,pinebook-pro", "rockchip,rk3399"; + chassis-type = "laptop"; aliases { mmc0 = &sdio0; @@ -385,10 +386,6 @@ }; }; -&cdn_dp { - status = "okay"; -}; - &cpu_b0 { cpu-supply = <&vdd_cpu_b>; }; @@ -711,7 +708,7 @@ connector { compatible = "usb-c-connector"; - data-role = "host"; + data-role = "dual"; label = "USB-C"; op-sink-microwatt = <1000000>; power-role = "dual"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts new file mode 100644 index 000000000000..5a2661ae0131 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts @@ -0,0 +1,218 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd + */ + +/dts-v1/; +#include "rk3399-roc-pc.dtsi" + +/* + * Notice: + * 1. rk3399-roc-pc-plus is powered by dc_12v directly. + * 2. rk3399-roc-pc-plus has only vcc_bus_typec0 in schematic, which is coresponding + * to vcc_vbus_typec1 in rk3399-roc-pc. + * For simplicity, reserve the node name of vcc_vbus_typec1. + * 3. vcc5v0_host is actually 2 regulators (host0, 1) controlled by the same gpio. + */ + +/delete-node/ &fusb1; +/delete-node/ &hub_rst; +/delete-node/ &mp8859; +/delete-node/ &vcc_sys_en; +/delete-node/ &vcc_vbus_typec0; +/delete-node/ &yellow_led; + +/ { + model = "Firefly ROC-RK3399-PC-PLUS Board"; + compatible = "firefly,roc-rk3399-pc-plus", "rockchip,rk3399"; + + dc_12v: dc-12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + es8388-sound { + compatible = "simple-audio-card"; + pinctrl-names = "default"; + pinctrl-0 = <&hp_det_pin>; + simple-audio-card,name = "rockchip,es8388-codec"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphones"; + simple-audio-card,routing = + "LINPUT1", "Mic Jack", + "Headphone Amp INL", "LOUT2", + "Headphone Amp INR", "ROUT2", + "Headphones", "Headphone Amp OUTL", + "Headphones", "Headphone Amp OUTR"; + simple-audio-card,hp-det-gpio = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>; + simple-audio-card,aux-devs = <&headphones_amp>; + simple-audio-card,pin-switches = "Headphones"; + + simple-audio-card,codec { + sound-dai = <&es8388>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s1>; + }; + }; + + gpio-fan { + #cooling-cells = <2>; + compatible = "gpio-fan"; + gpio-fan,speed-map = <0 0 3000 1>; + gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>; + }; + + /delete-node/ gpio-keys; + + /* not amplifier, used as switcher only */ + headphones_amp: headphones-amp { + compatible = "simple-audio-amplifier"; + pinctrl-names = "default"; + pinctrl-0 = <&ear_ctl_pin>; + enable-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; + sound-name-prefix = "Headphone Amp"; + VCC-supply = <&vcca3v0_codec>; + }; + + ir-receiver { + linux,rc-map-name = "rc-khadas"; + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&work_led_pin>, <&diy_led_pin>; + }; +}; + +&fusb0 { + vbus-supply = <&vcc_vbus_typec1>; +}; + +&i2c0 { + hym8563: hym8563@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA5 IRQ_TYPE_EDGE_FALLING>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + }; +}; + +&i2c1 { + es8388: es8388@11 { + compatible = "everest,es8388"; + reg = <0x11>; + clock-names = "mclk"; + clocks = <&cru SCLK_I2S_8CH_OUT>; + #sound-dai-cells = <0>; + }; +}; + +/* <4 RK_PA0 1 &pcfg_pull_none> is used as i2s_8ch_mclk_pin */ +&i2s0_8ch_bus { + rockchip,pins = + <3 RK_PD0 1 &pcfg_pull_none>, + <3 RK_PD1 1 &pcfg_pull_none>, + <3 RK_PD2 1 &pcfg_pull_none>, + <3 RK_PD3 1 &pcfg_pull_none>, + <3 RK_PD4 1 &pcfg_pull_none>, + <3 RK_PD5 1 &pcfg_pull_none>, + <3 RK_PD6 1 &pcfg_pull_none>, + <3 RK_PD7 1 &pcfg_pull_none>; +}; + +&i2s1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2s_8ch_mclk_pin>, <&i2s1_2ch_bus>; + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; + status = "okay"; +}; + +&pinctrl { + es8388 { + ear_ctl_pin: ear-ctl-pin { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_output_high>; + }; + + hp_det_pin: hp-det-pin { + rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + i2s1 { + i2s_8ch_mclk_pin: i2s-8ch-mclk-pin { + rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>; + }; + }; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + phy-supply = <&vcc_vbus_typec1>; + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "okay"; +}; + +&usbdrd_dwc3_0 { + dr_mode = "host"; + status = "okay"; +}; + +&vcc_sys { + /* vcc_sys is fixed, not controlled by any gpio */ + /delete-property/ gpio; + /delete-property/ pinctrl-names; + /delete-property/ pinctrl-0; +}; + +&vcc5v0_host { + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi index b28888ea9262..98136c88fa49 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi @@ -36,6 +36,29 @@ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; }; + sound { + compatible = "audio-graph-card"; + label = "Analog"; + dais = <&i2s0_p0>; + }; + + sound-dit { + compatible = "audio-graph-card"; + label = "SPDIF"; + dais = <&spdif_p0>; + }; + + spdif-dit { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + + port { + dit_p0_0: endpoint { + remote-endpoint = <&spdif_p0_0>; + }; + }; + }; + vcc12v_dcin: dc-12v { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin"; @@ -422,6 +445,20 @@ i2c-scl-rising-time-ns = <300>; i2c-scl-falling-time-ns = <15>; status = "okay"; + + es8316: codec@11 { + compatible = "everest,es8316"; + reg = <0x11>; + clocks = <&cru SCLK_I2S_8CH_OUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + + port { + es8316_p0_0: endpoint { + remote-endpoint = <&i2s0_p0_0>; + }; + }; + }; }; &i2c3 { @@ -441,6 +478,14 @@ rockchip,capture-channels = <2>; rockchip,playback-channels = <2>; status = "okay"; + + i2s0_p0: port { + i2s0_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&es8316_p0_0>; + }; + }; }; &i2s1 { @@ -603,6 +648,15 @@ status = "okay"; }; +&spdif { + + spdif_p0: port { + spdif_p0_0: endpoint { + remote-endpoint = <&dit_p0_0>; + }; + }; +}; + &tcphy0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a-plus.dts new file mode 100644 index 000000000000..281a04b2f5e9 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a-plus.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com> + * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com> + */ + +/dts-v1/; +#include "rk3399-rock-pi-4.dtsi" +#include "rk3399-op1-opp.dtsi" + +/ { + model = "Radxa ROCK Pi 4A+"; + compatible = "radxa,rockpi4a-plus", "radxa,rockpi4", "rockchip,rk3399"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts new file mode 100644 index 000000000000..dfad13d2ab24 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com> + * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com> + */ + +/dts-v1/; +#include "rk3399-rock-pi-4.dtsi" +#include "rk3399-op1-opp.dtsi" + +/ { + model = "Radxa ROCK Pi 4B+"; + compatible = "radxa,rockpi4b-plus", "radxa,rockpi4", "rockchip,rk3399"; + + aliases { + mmc2 = &sdio0; + }; +}; + +&sdio0 { + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + +&uart0 { + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi index 6bff8db7d33e..83db4ca67334 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi @@ -69,6 +69,7 @@ fan: pwm-fan { compatible = "pwm-fan"; + cooling-levels = <0 100 150 200 255>; #cooling-cells = <2>; fan-supply = <&vcc12v_dcin>; pwms = <&pwm1 0 50000 0>; @@ -245,6 +246,34 @@ cpu-supply = <&vdd_cpu_b>; }; +&cpu_thermal { + trips { + cpu_warm: cpu_warm { + temperature = <55000>; + hysteresis = <2000>; + type = "active"; + }; + + cpu_hot: cpu_hot { + temperature = <65000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map2 { + trip = <&cpu_warm>; + cooling-device = <&fan THERMAL_NO_LIMIT 1>; + }; + + map3 { + trip = <&cpu_hot>; + cooling-device = <&fan 2 THERMAL_NO_LIMIT>; + }; + }; +}; + &emmc_phy { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 3871c7fd83b0..d3cdf6f42a30 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -124,6 +124,12 @@ #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <436>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + + thermal-idle { + #cooling-cells = <2>; + duration-us = <10000>; + exit-latency-us = <500>; + }; }; cpu_b1: cpu@101 { @@ -136,6 +142,12 @@ #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <436>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + + thermal-idle { + #cooling-cells = <2>; + duration-us = <10000>; + exit-latency-us = <500>; + }; }; idle-states { @@ -361,6 +373,54 @@ status = "disabled"; }; + debug@fe430000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0 0xfe430000 0 0x1000>; + clocks = <&cru PCLK_COREDBG_L>; + clock-names = "apb_pclk"; + cpu = <&cpu_l0>; + }; + + debug@fe432000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0 0xfe432000 0 0x1000>; + clocks = <&cru PCLK_COREDBG_L>; + clock-names = "apb_pclk"; + cpu = <&cpu_l1>; + }; + + debug@fe434000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0 0xfe434000 0 0x1000>; + clocks = <&cru PCLK_COREDBG_L>; + clock-names = "apb_pclk"; + cpu = <&cpu_l2>; + }; + + debug@fe436000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0 0xfe436000 0 0x1000>; + clocks = <&cru PCLK_COREDBG_L>; + clock-names = "apb_pclk"; + cpu = <&cpu_l3>; + }; + + debug@fe610000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0 0xfe610000 0 0x1000>; + clocks = <&cru PCLK_COREDBG_B>; + clock-names = "apb_pclk"; + cpu = <&cpu_b0>; + }; + + debug@fe710000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0 0xfe710000 0 0x1000>; + clocks = <&cru PCLK_COREDBG_B>; + clock-names = "apb_pclk"; + cpu = <&cpu_b1>; + }; + usbdrd3_0: usb@fe800000 { compatible = "rockchip,rk3399-dwc3"; #address-cells = <2>; @@ -1251,7 +1311,6 @@ compatible = "rockchip,iommu"; reg = <0x0 0xff650800 0x0 0x40>; interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "vpu_mmu"; clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; clock-names = "aclk", "iface"; #iommu-cells = <0>; @@ -1273,7 +1332,6 @@ compatible = "rockchip,iommu"; reg = <0x0 0xff660480 0x0 0x40>, <0x0 0xff6604c0 0x0 0x40>; interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "vdec_mmu"; clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>; clock-names = "aclk", "iface"; power-domains = <&power RK3399_PD_VDU>; @@ -1284,7 +1342,6 @@ compatible = "rockchip,iommu"; reg = <0x0 0xff670800 0x0 0x40>; interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "iep_mmu"; clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>; clock-names = "aclk", "iface"; #iommu-cells = <0>; @@ -1666,7 +1723,6 @@ compatible = "rockchip,iommu"; reg = <0x0 0xff8f3f00 0x0 0x100>; interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "vopl_mmu"; clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>; clock-names = "aclk", "iface"; power-domains = <&power RK3399_PD_VOPL>; @@ -1723,7 +1779,6 @@ compatible = "rockchip,iommu"; reg = <0x0 0xff903f00 0x0 0x100>; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "vopb_mmu"; clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>; clock-names = "aclk", "iface"; power-domains = <&power RK3399_PD_VOPB>; @@ -1761,7 +1816,6 @@ compatible = "rockchip,iommu"; reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>; interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "isp0_mmu"; clocks = <&cru ACLK_ISP0_WRAPPER>, <&cru HCLK_ISP0_WRAPPER>; clock-names = "aclk", "iface"; #iommu-cells = <0>; @@ -1769,11 +1823,36 @@ rockchip,disable-mmu-reset; }; + isp1: isp1@ff920000 { + compatible = "rockchip,rk3399-cif-isp"; + reg = <0x0 0xff920000 0x0 0x4000>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_ISP1>, + <&cru ACLK_ISP1_WRAPPER>, + <&cru HCLK_ISP1_WRAPPER>; + clock-names = "isp", "aclk", "hclk"; + iommus = <&isp1_mmu>; + phys = <&mipi_dsi1>; + phy-names = "dphy"; + power-domains = <&power RK3399_PD_ISP1>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + isp1_mmu: iommu@ff924000 { compatible = "rockchip,iommu"; reg = <0x0 0xff924000 0x0 0x100>, <0x0 0xff925000 0x0 0x100>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "isp1_mmu"; clocks = <&cru ACLK_ISP1_WRAPPER>, <&cru HCLK_ISP1_WRAPPER>; clock-names = "aclk", "iface"; #iommu-cells = <0>; @@ -1878,6 +1957,7 @@ rockchip,grf = <&grf>; #address-cells = <1>; #size-cells = <0>; + #phy-cells = <0>; status = "disabled"; ports { @@ -1958,7 +2038,7 @@ #size-cells = <2>; ranges; - gpio0: gpio0@ff720000 { + gpio0: gpio@ff720000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff720000 0x0 0x100>; clocks = <&pmucru PCLK_GPIO0_PMU>; @@ -1971,7 +2051,7 @@ #interrupt-cells = <0x2>; }; - gpio1: gpio1@ff730000 { + gpio1: gpio@ff730000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff730000 0x0 0x100>; clocks = <&pmucru PCLK_GPIO1_PMU>; @@ -1984,7 +2064,7 @@ #interrupt-cells = <0x2>; }; - gpio2: gpio2@ff780000 { + gpio2: gpio@ff780000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff780000 0x0 0x100>; clocks = <&cru PCLK_GPIO2>; @@ -1997,7 +2077,7 @@ #interrupt-cells = <0x2>; }; - gpio3: gpio3@ff788000 { + gpio3: gpio@ff788000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff788000 0x0 0x100>; clocks = <&cru PCLK_GPIO3>; @@ -2010,7 +2090,7 @@ #interrupt-cells = <0x2>; }; - gpio4: gpio4@ff790000 { + gpio4: gpio@ff790000 { compatible = "rockchip,gpio-bank"; reg = <0x0 0xff790000 0x0 0x100>; clocks = <&cru PCLK_GPIO4>; @@ -2114,6 +2194,18 @@ }; }; + cif { + cif_clkin: cif-clkin { + rockchip,pins = + <2 RK_PB2 3 &pcfg_pull_none>; + }; + + cif_clkouta: cif-clkouta { + rockchip,pins = + <2 RK_PB3 3 &pcfg_pull_none>; + }; + }; + edp { edp_hpd: edp-hpd { rockchip,pins = diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts new file mode 100644 index 000000000000..4d4b2a301b1a --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts @@ -0,0 +1,548 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3566.dtsi" + +/ { + model = "Pine64 RK3566 Quartz64-A Board"; + compatible = "pine64,quartz64-a", "rockchip,rk3566"; + + aliases { + ethernet0 = &gmac1; + mmc0 = &sdmmc0; + mmc1 = &sdhci; + }; + + chosen: chosen { + stdout-path = "serial2:1500000n8"; + }; + + gmac1_clkin: external-gmac1-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac1_clkin"; + #clock-cells = <0>; + }; + + fan: gpio_fan { + compatible = "gpio-fan"; + gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = <0 0 + 4500 1>; + #cooling-cells = <2>; + }; + + leds { + compatible = "gpio-leds"; + + led-work { + label = "work-led"; + default-state = "off"; + gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&work_led_enable_h>; + retain-state-suspended; + }; + + led-diy { + label = "diy-led"; + default-state = "on"; + gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&diy_led_enable_h>; + retain-state-suspended; + }; + }; + + rk817-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "Analog RK817"; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + + simple-audio-card,codec { + sound-dai = <&rk817>; + }; + }; + + spdif_dit: spdif-dit { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + + spdif_sound: spdif-sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "SPDIF"; + + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_dit>; + }; + }; + + vcc12v_dcin: vcc12v_dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + /* vbus feeds the rk817 usb input. + * With no battery attached, also feeds vcc_bat+ + * via ON/OFF_BAT jumper + */ + vbus: vbus { + compatible = "regulator-fixed"; + regulator-name = "vbus"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usb: vcc5v0_usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc3v3_sd: vcc3v3_sd { + compatible = "regulator-fixed"; + enable-active-low; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc_sd_h>; + regulator-boot-on; + regulator-name = "vcc3v3_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3>; + }; + + /* sourced from vbus and vcc_bat+ via rk817 sw5 */ + vcc_sys: vcc_sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <4400000>; + regulator-max-microvolt = <4400000>; + vin-supply = <&vbus>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu_thermal { + trips { + cpu_hot: cpu_hot { + temperature = <55000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map1 { + trip = <&cpu_hot>; + cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +&gmac1 { + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>; + clock_in_out = "input"; + phy-supply = <&vcc_3v3>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m0_miim + &gmac1m0_tx_bus2 + &gmac1m0_rx_bus2 + &gmac1m0_rgmii_clk + &gmac1m0_clkinout + &gmac1m0_rgmii_bus>; + snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + /* Reset time is 20ms, 100ms for rtl8211f */ + snps,reset-delays-us = <0 20000 100000>; + tx_delay = <0x30>; + rx_delay = <0x10>; + phy-handle = <&rgmii_phy1>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <2300>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk817: pmic@20 { + compatible = "rockchip,rk817"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; + clock-names = "mclk"; + clocks = <&cru I2S1_MCLKOUT_TX>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + #clock-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>; + rockchip,system-power-controller; + #sound-dai-cells = <0>; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc_sys>; + vcc9-supply = <&dcdc_boost>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_logic"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_gpu"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <0x2>; + regulator-name = "vcc_ddr"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v3: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <0x2>; + regulator-name = "vcc_3v3"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda_0v9"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda0v9_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_acodec"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v8: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_dvp: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc1v8_dvp"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc2v8_dvp: LDO_REG9 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vcc2v8_dvp"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + dcdc_boost: BOOST { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "boost"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + otg_switch: OTG_SWITCH { + regulator-name = "otg_switch"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2s1_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_sclktx + &i2s1m0_lrcktx + &i2s1m0_sdi0 + &i2s1m0_sdo0>; + rockchip,trcm-sync-tx-only; + status = "okay"; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + +&pinctrl { + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + work_led_enable_h: work-led-enable-h { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + diy_led_enable_h: diy-led-enable-h { + rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + vcc_sd { + vcc_sd_h: vcc-sd-h { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdhci { + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&spdif { + status = "okay"; +}; + +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>; + status = "okay"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk817 1>; + clock-names = "lpo"; + device-wake-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + vbat-supply = <&vcc_sys>; + vddio-supply = <&vcca1v8_pmu>; + }; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566.dtsi b/arch/arm64/boot/dts/rockchip/rk3566.dtsi new file mode 100644 index 000000000000..3839eef5e4f7 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566.dtsi @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +#include "rk356x.dtsi" + +/ { + compatible = "rockchip,rk3566"; +}; + +&power { + power-domain@RK3568_PD_PIPE { + reg = <RK3568_PD_PIPE>; + clocks = <&cru PCLK_PIPE>; + pm_qos = <&qos_pcie2x1>, + <&qos_sata1>, + <&qos_sata2>, + <&qos_usb3_0>, + <&qos_usb3_1>; + #power-domain-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts index 69786557093d..184e2aa2416a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts @@ -13,6 +13,13 @@ model = "Rockchip RK3568 EVB1 DDR4 V10 Board"; compatible = "rockchip,rk3568-evb1-v10", "rockchip,rk3568"; + aliases { + ethernet0 = &gmac0; + ethernet1 = &gmac1; + mmc0 = &sdmmc0; + mmc1 = &sdhci; + }; + chosen: chosen { stdout-path = "serial2:1500000n8"; }; @@ -67,10 +74,316 @@ }; }; +&gmac0 { + assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; + assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>; + assigned-clock-rates = <0>, <125000000>; + clock_in_out = "output"; + phy-handle = <&rgmii_phy0>; + phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_miim + &gmac0_tx_bus2 + &gmac0_rx_bus2 + &gmac0_rgmii_clk + &gmac0_rgmii_bus>; + status = "okay"; +}; + +&gmac1 { + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>; + assigned-clock-rates = <0>, <125000000>; + clock_in_out = "output"; + phy-handle = <&rgmii_phy1>; + phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m1_miim + &gmac1m1_tx_bus2 + &gmac1m1_rx_bus2 + &gmac1m1_rgmii_clk + &gmac1m1_rgmii_bus>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + wakeup-source; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-boot-on; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-name = "vdd_npu"; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-name = "vdda0v9_image"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-name = "vdda0v9_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-name = "vcc3v3_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-name = "vcca1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-name = "vcca1v8_image"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&mdio0 { + rgmii_phy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>; + }; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>; + }; +}; + +&pinctrl { + pmic { + pmic_int: pmic_int { + rockchip,pins = + <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio2-supply = <&vcc_1v8>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_1v8>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca_1v8>; + status = "okay"; +}; + &sdhci { bus-width = <8>; max-frequency = <200000000>; non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi index a588ca95ace2..8f90c66dd9e9 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi @@ -3108,4 +3108,13 @@ <4 RK_PA0 3 &pcfg_pull_none_drv_level_2>; }; }; + + tsadc { + /omit-if-no-ref/ + tsadc_pin: tsadc-pin { + rockchip,pins = + /* tsadc_pin */ + <0 RK_PA1 0 &pcfg_pull_none>; + }; + }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi index d225e6a45d5c..2fd313a295f8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi @@ -3,591 +3,95 @@ * Copyright (c) 2021 Rockchip Electronics Co., Ltd. */ -#include <dt-bindings/clock/rk3568-cru.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/phy/phy.h> -#include <dt-bindings/pinctrl/rockchip.h> -#include <dt-bindings/soc/rockchip,boot-mode.h> -#include <dt-bindings/thermal/thermal.h> +#include "rk356x.dtsi" / { compatible = "rockchip,rk3568"; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - aliases { - gpio0 = &gpio0; - gpio1 = &gpio1; - gpio2 = &gpio2; - gpio3 = &gpio3; - gpio4 = &gpio4; - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - i2c4 = &i2c4; - i2c5 = &i2c5; - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; - serial3 = &uart3; - serial4 = &uart4; - serial5 = &uart5; - serial6 = &uart6; - serial7 = &uart7; - serial8 = &uart8; - serial9 = &uart9; - }; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x0 0x0>; - clocks = <&scmi_clk 0>; - enable-method = "psci"; - operating-points-v2 = <&cpu0_opp_table>; - }; - - cpu1: cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x0 0x100>; - enable-method = "psci"; - operating-points-v2 = <&cpu0_opp_table>; - }; - - cpu2: cpu@200 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x0 0x200>; - enable-method = "psci"; - operating-points-v2 = <&cpu0_opp_table>; - }; - - cpu3: cpu@300 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x0 0x300>; - enable-method = "psci"; - operating-points-v2 = <&cpu0_opp_table>; - }; - }; - - cpu0_opp_table: cpu0-opp-table { - compatible = "operating-points-v2"; - opp-shared; - - opp-408000000 { - opp-hz = /bits/ 64 <408000000>; - opp-microvolt = <900000 900000 1150000>; - clock-latency-ns = <40000>; - }; - - opp-600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <900000 900000 1150000>; - }; - - opp-816000000 { - opp-hz = /bits/ 64 <816000000>; - opp-microvolt = <900000 900000 1150000>; - opp-suspend; - }; - - opp-1104000000 { - opp-hz = /bits/ 64 <1104000000>; - opp-microvolt = <900000 900000 1150000>; - }; - - opp-1416000000 { - opp-hz = /bits/ 64 <1416000000>; - opp-microvolt = <900000 900000 1150000>; - }; - - opp-1608000000 { - opp-hz = /bits/ 64 <1608000000>; - opp-microvolt = <975000 975000 1150000>; - }; + qos_pcie3x1: qos@fe190080 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe190080 0x0 0x20>; + }; + + qos_pcie3x2: qos@fe190100 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe190100 0x0 0x20>; + }; + + qos_sata0: qos@fe190200 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe190200 0x0 0x20>; + }; + + gmac0: ethernet@fe2a0000 { + compatible = "rockchip,rk3568-gmac", "snps,dwmac-4.20a"; + reg = <0x0 0xfe2a0000 0x0 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq"; + clocks = <&cru SCLK_GMAC0>, <&cru SCLK_GMAC0_RX_TX>, + <&cru SCLK_GMAC0_RX_TX>, <&cru CLK_MAC0_REFOUT>, + <&cru ACLK_GMAC0>, <&cru PCLK_GMAC0>, + <&cru SCLK_GMAC0_RX_TX>, <&cru CLK_GMAC0_PTP_REF>, + <&cru PCLK_XPCS>; + clock-names = "stmmaceth", "mac_clk_rx", + "mac_clk_tx", "clk_mac_refout", + "aclk_mac", "pclk_mac", + "clk_mac_speed", "ptp_ref", + "pclk_xpcs"; + resets = <&cru SRST_A_GMAC0>; + reset-names = "stmmaceth"; + rockchip,grf = <&grf>; + snps,axi-config = <&gmac0_stmmac_axi_setup>; + snps,mixed-burst; + snps,mtl-rx-config = <&gmac0_mtl_rx_setup>; + snps,mtl-tx-config = <&gmac0_mtl_tx_setup>; + snps,tso; + status = "disabled"; - opp-1800000000 { - opp-hz = /bits/ 64 <1800000000>; - opp-microvolt = <1050000 1050000 1150000>; + mdio0: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <0x1>; + #size-cells = <0x0>; }; - opp-1992000000 { - opp-hz = /bits/ 64 <1992000000>; - opp-microvolt = <1150000 1150000 1150000>; + gmac0_stmmac_axi_setup: stmmac-axi-config { + snps,blen = <0 0 0 0 16 8 4>; + snps,rd_osr_lmt = <8>; + snps,wr_osr_lmt = <4>; }; - }; - firmware { - scmi: scmi { - compatible = "arm,scmi-smc"; - arm,smc-id = <0x82000010>; - shmem = <&scmi_shmem>; - #address-cells = <1>; - #size-cells = <0>; - - scmi_clk: protocol@14 { - reg = <0x14>; - #clock-cells = <1>; - }; + gmac0_mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + queue0 {}; }; - }; - - pmu { - compatible = "arm,cortex-a55-pmu"; - interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; - }; - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, - <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, - <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, - <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; - arm,no-tick-in-suspend; - }; - - xin24m: xin24m { - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "xin24m"; - #clock-cells = <0>; - }; - - xin32k: xin32k { - compatible = "fixed-clock"; - clock-frequency = <32768>; - clock-output-names = "xin32k"; - pinctrl-0 = <&clk32k_out0>; - pinctrl-names = "default"; - #clock-cells = <0>; - }; - - sram@10f000 { - compatible = "mmio-sram"; - reg = <0x0 0x0010f000 0x0 0x100>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x0 0x0010f000 0x100>; - - scmi_shmem: sram@0 { - compatible = "arm,scmi-shmem"; - reg = <0x0 0x100>; + gmac0_mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + queue0 {}; }; }; +}; - gic: interrupt-controller@fd400000 { - compatible = "arm,gic-v3"; - reg = <0x0 0xfd400000 0 0x10000>, /* GICD */ - <0x0 0xfd460000 0 0x80000>; /* GICR */ - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <3>; - mbi-alias = <0x0 0xfd100000>; - mbi-ranges = <296 24>; - msi-controller; - }; - - pmugrf: syscon@fdc20000 { - compatible = "rockchip,rk3568-pmugrf", "syscon", "simple-mfd"; - reg = <0x0 0xfdc20000 0x0 0x10000>; - }; - - grf: syscon@fdc60000 { - compatible = "rockchip,rk3568-grf", "syscon", "simple-mfd"; - reg = <0x0 0xfdc60000 0x0 0x10000>; - }; - - pmucru: clock-controller@fdd00000 { - compatible = "rockchip,rk3568-pmucru"; - reg = <0x0 0xfdd00000 0x0 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - cru: clock-controller@fdd20000 { - compatible = "rockchip,rk3568-cru"; - reg = <0x0 0xfdd20000 0x0 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - i2c0: i2c@fdd40000 { - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; - reg = <0x0 0xfdd40000 0x0 0x1000>; - interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&pmucru CLK_I2C0>, <&pmucru PCLK_I2C0>; - clock-names = "i2c", "pclk"; - pinctrl-0 = <&i2c0_xfer>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - uart0: serial@fdd50000 { - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfdd50000 0x0 0x100>; - interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&pmucru SCLK_UART0>, <&pmucru PCLK_UART0>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 0>, <&dmac0 1>; - pinctrl-0 = <&uart0_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - sdmmc2: mmc@fe000000 { - compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc"; - reg = <0x0 0xfe000000 0x0 0x4000>; - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru HCLK_SDMMC2>, <&cru CLK_SDMMC2>, - <&cru SCLK_SDMMC2_DRV>, <&cru SCLK_SDMMC2_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; - fifo-depth = <0x100>; - max-frequency = <150000000>; - resets = <&cru SRST_SDMMC2>; - reset-names = "reset"; - status = "disabled"; - }; - - sdmmc0: mmc@fe2b0000 { - compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc"; - reg = <0x0 0xfe2b0000 0x0 0x4000>; - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru HCLK_SDMMC0>, <&cru CLK_SDMMC0>, - <&cru SCLK_SDMMC0_DRV>, <&cru SCLK_SDMMC0_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; - fifo-depth = <0x100>; - max-frequency = <150000000>; - resets = <&cru SRST_SDMMC0>; - reset-names = "reset"; - status = "disabled"; - }; - - sdmmc1: mmc@fe2c0000 { - compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc"; - reg = <0x0 0xfe2c0000 0x0 0x4000>; - interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru HCLK_SDMMC1>, <&cru CLK_SDMMC1>, - <&cru SCLK_SDMMC1_DRV>, <&cru SCLK_SDMMC1_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; - fifo-depth = <0x100>; - max-frequency = <150000000>; - resets = <&cru SRST_SDMMC1>; - reset-names = "reset"; - status = "disabled"; - }; - - sdhci: mmc@fe310000 { - compatible = "rockchip,rk3568-dwcmshc"; - reg = <0x0 0xfe310000 0x0 0x10000>; - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; - assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>; - assigned-clock-rates = <200000000>, <24000000>; - clocks = <&cru CCLK_EMMC>, <&cru HCLK_EMMC>, - <&cru ACLK_EMMC>, <&cru BCLK_EMMC>, - <&cru TCLK_EMMC>; - clock-names = "core", "bus", "axi", "block", "timer"; - status = "disabled"; - }; - - dmac0: dmac@fe530000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xfe530000 0x0 0x4000>; - interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - arm,pl330-periph-burst; - clocks = <&cru ACLK_BUS>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - }; - - dmac1: dmac@fe550000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xfe550000 0x0 0x4000>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; - arm,pl330-periph-burst; - clocks = <&cru ACLK_BUS>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - }; - - i2c1: i2c@fe5a0000 { - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; - reg = <0x0 0xfe5a0000 0x0 0x1000>; - interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>; - clock-names = "i2c", "pclk"; - pinctrl-0 = <&i2c1_xfer>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c2: i2c@fe5b0000 { - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; - reg = <0x0 0xfe5b0000 0x0 0x1000>; - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru CLK_I2C2>, <&cru PCLK_I2C2>; - clock-names = "i2c", "pclk"; - pinctrl-0 = <&i2c2m0_xfer>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c3: i2c@fe5c0000 { - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; - reg = <0x0 0xfe5c0000 0x0 0x1000>; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>; - clock-names = "i2c", "pclk"; - pinctrl-0 = <&i2c3m0_xfer>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c4: i2c@fe5d0000 { - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; - reg = <0x0 0xfe5d0000 0x0 0x1000>; - interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru CLK_I2C4>, <&cru PCLK_I2C4>; - clock-names = "i2c", "pclk"; - pinctrl-0 = <&i2c4m0_xfer>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c5: i2c@fe5e0000 { - compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; - reg = <0x0 0xfe5e0000 0x0 0x1000>; - interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru CLK_I2C5>, <&cru PCLK_I2C5>; - clock-names = "i2c", "pclk"; - pinctrl-0 = <&i2c5m0_xfer>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - uart1: serial@fe650000 { - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfe650000 0x0 0x100>; - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 2>, <&dmac0 3>; - pinctrl-0 = <&uart1m0_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart2: serial@fe660000 { - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfe660000 0x0 0x100>; - interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 4>, <&dmac0 5>; - pinctrl-0 = <&uart2m0_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart3: serial@fe670000 { - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfe670000 0x0 0x100>; - interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 6>, <&dmac0 7>; - pinctrl-0 = <&uart3m0_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart4: serial@fe680000 { - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfe680000 0x0 0x100>; - interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 8>, <&dmac0 9>; - pinctrl-0 = <&uart4m0_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart5: serial@fe690000 { - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfe690000 0x0 0x100>; - interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 10>, <&dmac0 11>; - pinctrl-0 = <&uart5m0_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart6: serial@fe6a0000 { - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfe6a0000 0x0 0x100>; - interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 12>, <&dmac0 13>; - pinctrl-0 = <&uart6m0_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart7: serial@fe6b0000 { - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfe6b0000 0x0 0x100>; - interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 14>, <&dmac0 15>; - pinctrl-0 = <&uart7m0_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart8: serial@fe6c0000 { - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfe6c0000 0x0 0x100>; - interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_UART8>, <&cru PCLK_UART8>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 16>, <&dmac0 17>; - pinctrl-0 = <&uart8m0_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart9: serial@fe6d0000 { - compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; - reg = <0x0 0xfe6d0000 0x0 0x100>; - interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_UART9>, <&cru PCLK_UART9>; - clock-names = "baudclk", "apb_pclk"; - dmas = <&dmac0 18>, <&dmac0 19>; - pinctrl-0 = <&uart9m0_xfer>; - pinctrl-names = "default"; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; +&cpu0_opp_table { + opp-1992000000 { + opp-hz = /bits/ 64 <1992000000>; + opp-microvolt = <1150000 1150000 1150000>; }; +}; - pinctrl: pinctrl { - compatible = "rockchip,rk3568-pinctrl"; - rockchip,grf = <&grf>; - rockchip,pmu = <&pmugrf>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - gpio0: gpio@fdd60000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xfdd60000 0x0 0x100>; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&pmucru PCLK_GPIO0>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio1: gpio@fe740000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xfe740000 0x0 0x100>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_GPIO1>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio2: gpio@fe750000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xfe750000 0x0 0x100>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_GPIO2>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio3: gpio@fe760000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xfe760000 0x0 0x100>; - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_GPIO3>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio4: gpio@fe770000 { - compatible = "rockchip,gpio-bank"; - reg = <0x0 0xfe770000 0x0 0x100>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_GPIO4>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; +&power { + power-domain@RK3568_PD_PIPE { + reg = <RK3568_PD_PIPE>; + clocks = <&cru PCLK_PIPE>; + pm_qos = <&qos_pcie2x1>, + <&qos_pcie3x1>, + <&qos_pcie3x2>, + <&qos_sata0>, + <&qos_sata1>, + <&qos_sata2>, + <&qos_usb3_0>, + <&qos_usb3_1>; + #power-domain-cells = <0>; }; }; - -#include "rk3568-pinctrl.dtsi" diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi new file mode 100644 index 000000000000..46d9552f6028 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi @@ -0,0 +1,1145 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Rockchip Electronics Co., Ltd. + */ + +#include <dt-bindings/clock/rk3568-cru.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/power/rk3568-power.h> +#include <dt-bindings/soc/rockchip,boot-mode.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + gpio4 = &gpio4; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + serial6 = &uart6; + serial7 = &uart7; + serial8 = &uart8; + serial9 = &uart9; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x0>; + clocks = <&scmi_clk 0>; + #cooling-cells = <2>; + enable-method = "psci"; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x100>; + #cooling-cells = <2>; + enable-method = "psci"; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x200>; + #cooling-cells = <2>; + enable-method = "psci"; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x300>; + #cooling-cells = <2>; + enable-method = "psci"; + operating-points-v2 = <&cpu0_opp_table>; + }; + }; + + cpu0_opp_table: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <900000 900000 1150000>; + clock-latency-ns = <40000>; + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <900000 900000 1150000>; + }; + + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <900000 900000 1150000>; + opp-suspend; + }; + + opp-1104000000 { + opp-hz = /bits/ 64 <1104000000>; + opp-microvolt = <900000 900000 1150000>; + }; + + opp-1416000000 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <900000 900000 1150000>; + }; + + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <975000 975000 1150000>; + }; + + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1050000 1050000 1150000>; + }; + }; + + firmware { + scmi: scmi { + compatible = "arm,scmi-smc"; + arm,smc-id = <0x82000010>; + shmem = <&scmi_shmem>; + #address-cells = <1>; + #size-cells = <0>; + + scmi_clk: protocol@14 { + reg = <0x14>; + #clock-cells = <1>; + }; + }; + }; + + pmu { + compatible = "arm,cortex-a55-pmu"; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; + arm,no-tick-in-suspend; + }; + + xin24m: xin24m { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + #clock-cells = <0>; + }; + + xin32k: xin32k { + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + pinctrl-0 = <&clk32k_out0>; + pinctrl-names = "default"; + #clock-cells = <0>; + }; + + sram@10f000 { + compatible = "mmio-sram"; + reg = <0x0 0x0010f000 0x0 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x0010f000 0x100>; + + scmi_shmem: sram@0 { + compatible = "arm,scmi-shmem"; + reg = <0x0 0x100>; + }; + }; + + gic: interrupt-controller@fd400000 { + compatible = "arm,gic-v3"; + reg = <0x0 0xfd400000 0 0x10000>, /* GICD */ + <0x0 0xfd460000 0 0x80000>; /* GICR */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + mbi-alias = <0x0 0xfd410000>; + mbi-ranges = <296 24>; + msi-controller; + }; + + pmugrf: syscon@fdc20000 { + compatible = "rockchip,rk3568-pmugrf", "syscon", "simple-mfd"; + reg = <0x0 0xfdc20000 0x0 0x10000>; + + pmu_io_domains: io-domains { + compatible = "rockchip,rk3568-pmu-io-voltage-domain"; + status = "disabled"; + }; + }; + + grf: syscon@fdc60000 { + compatible = "rockchip,rk3568-grf", "syscon", "simple-mfd"; + reg = <0x0 0xfdc60000 0x0 0x10000>; + }; + + pmucru: clock-controller@fdd00000 { + compatible = "rockchip,rk3568-pmucru"; + reg = <0x0 0xfdd00000 0x0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + cru: clock-controller@fdd20000 { + compatible = "rockchip,rk3568-cru"; + reg = <0x0 0xfdd20000 0x0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + assigned-clocks = <&cru PLL_GPLL>, <&pmucru PLL_PPLL>; + assigned-clock-rates = <1200000000>, <200000000>; + rockchip,grf = <&grf>; + }; + + i2c0: i2c@fdd40000 { + compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfdd40000 0x0 0x1000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmucru CLK_I2C0>, <&pmucru PCLK_I2C0>; + clock-names = "i2c", "pclk"; + pinctrl-0 = <&i2c0_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart0: serial@fdd50000 { + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfdd50000 0x0 0x100>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmucru SCLK_UART0>, <&pmucru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 0>, <&dmac0 1>; + pinctrl-0 = <&uart0_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + pwm0: pwm@fdd70000 { + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfdd70000 0x0 0x10>; + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm0m0_pins>; + pinctrl-names = "active"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm1: pwm@fdd70010 { + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfdd70010 0x0 0x10>; + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm1m0_pins>; + pinctrl-names = "active"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm2: pwm@fdd70020 { + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfdd70020 0x0 0x10>; + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm2m0_pins>; + pinctrl-names = "active"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm3: pwm@fdd70030 { + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfdd70030 0x0 0x10>; + clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm3_pins>; + pinctrl-names = "active"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pmu: power-management@fdd90000 { + compatible = "rockchip,rk3568-pmu", "syscon", "simple-mfd"; + reg = <0x0 0xfdd90000 0x0 0x1000>; + + power: power-controller { + compatible = "rockchip,rk3568-power-controller"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + /* These power domains are grouped by VD_GPU */ + power-domain@RK3568_PD_GPU { + reg = <RK3568_PD_GPU>; + clocks = <&cru ACLK_GPU_PRE>, + <&cru PCLK_GPU_PRE>; + pm_qos = <&qos_gpu>; + #power-domain-cells = <0>; + }; + + /* These power domains are grouped by VD_LOGIC */ + power-domain@RK3568_PD_VI { + reg = <RK3568_PD_VI>; + clocks = <&cru HCLK_VI>, + <&cru PCLK_VI>; + pm_qos = <&qos_isp>, + <&qos_vicap0>, + <&qos_vicap1>; + #power-domain-cells = <0>; + }; + + power-domain@RK3568_PD_VO { + reg = <RK3568_PD_VO>; + clocks = <&cru HCLK_VO>, + <&cru PCLK_VO>, + <&cru ACLK_VOP_PRE>; + pm_qos = <&qos_hdcp>, + <&qos_vop_m0>, + <&qos_vop_m1>; + #power-domain-cells = <0>; + }; + + power-domain@RK3568_PD_RGA { + reg = <RK3568_PD_RGA>; + clocks = <&cru HCLK_RGA_PRE>, + <&cru PCLK_RGA_PRE>; + pm_qos = <&qos_ebc>, + <&qos_iep>, + <&qos_jpeg_dec>, + <&qos_jpeg_enc>, + <&qos_rga_rd>, + <&qos_rga_wr>; + #power-domain-cells = <0>; + }; + + power-domain@RK3568_PD_VPU { + reg = <RK3568_PD_VPU>; + clocks = <&cru HCLK_VPU_PRE>; + pm_qos = <&qos_vpu>; + #power-domain-cells = <0>; + }; + + power-domain@RK3568_PD_RKVDEC { + clocks = <&cru HCLK_RKVDEC_PRE>; + reg = <RK3568_PD_RKVDEC>; + pm_qos = <&qos_rkvdec>; + #power-domain-cells = <0>; + }; + + power-domain@RK3568_PD_RKVENC { + reg = <RK3568_PD_RKVENC>; + clocks = <&cru HCLK_RKVENC_PRE>; + pm_qos = <&qos_rkvenc_rd_m0>, + <&qos_rkvenc_rd_m1>, + <&qos_rkvenc_wr_m0>; + #power-domain-cells = <0>; + }; + }; + }; + + sdmmc2: mmc@fe000000 { + compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xfe000000 0x0 0x4000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_SDMMC2>, <&cru CLK_SDMMC2>, + <&cru SCLK_SDMMC2_DRV>, <&cru SCLK_SDMMC2_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <150000000>; + resets = <&cru SRST_SDMMC2>; + reset-names = "reset"; + status = "disabled"; + }; + + gmac1: ethernet@fe010000 { + compatible = "rockchip,rk3568-gmac", "snps,dwmac-4.20a"; + reg = <0x0 0xfe010000 0x0 0x10000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq"; + clocks = <&cru SCLK_GMAC1>, <&cru SCLK_GMAC1_RX_TX>, + <&cru SCLK_GMAC1_RX_TX>, <&cru CLK_MAC1_REFOUT>, + <&cru ACLK_GMAC1>, <&cru PCLK_GMAC1>, + <&cru SCLK_GMAC1_RX_TX>, <&cru CLK_GMAC1_PTP_REF>; + clock-names = "stmmaceth", "mac_clk_rx", + "mac_clk_tx", "clk_mac_refout", + "aclk_mac", "pclk_mac", + "clk_mac_speed", "ptp_ref"; + resets = <&cru SRST_A_GMAC1>; + reset-names = "stmmaceth"; + rockchip,grf = <&grf>; + snps,axi-config = <&gmac1_stmmac_axi_setup>; + snps,mixed-burst; + snps,mtl-rx-config = <&gmac1_mtl_rx_setup>; + snps,mtl-tx-config = <&gmac1_mtl_tx_setup>; + snps,tso; + status = "disabled"; + + mdio1: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <0x1>; + #size-cells = <0x0>; + }; + + gmac1_stmmac_axi_setup: stmmac-axi-config { + snps,blen = <0 0 0 0 16 8 4>; + snps,rd_osr_lmt = <8>; + snps,wr_osr_lmt = <4>; + }; + + gmac1_mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + queue0 {}; + }; + + gmac1_mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + queue0 {}; + }; + }; + + qos_gpu: qos@fe128000 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe128000 0x0 0x20>; + }; + + qos_rkvenc_rd_m0: qos@fe138080 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe138080 0x0 0x20>; + }; + + qos_rkvenc_rd_m1: qos@fe138100 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe138100 0x0 0x20>; + }; + + qos_rkvenc_wr_m0: qos@fe138180 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe138180 0x0 0x20>; + }; + + qos_isp: qos@fe148000 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe148000 0x0 0x20>; + }; + + qos_vicap0: qos@fe148080 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe148080 0x0 0x20>; + }; + + qos_vicap1: qos@fe148100 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe148100 0x0 0x20>; + }; + + qos_vpu: qos@fe150000 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe150000 0x0 0x20>; + }; + + qos_ebc: qos@fe158000 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe158000 0x0 0x20>; + }; + + qos_iep: qos@fe158100 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe158100 0x0 0x20>; + }; + + qos_jpeg_dec: qos@fe158180 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe158180 0x0 0x20>; + }; + + qos_jpeg_enc: qos@fe158200 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe158200 0x0 0x20>; + }; + + qos_rga_rd: qos@fe158280 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe158280 0x0 0x20>; + }; + + qos_rga_wr: qos@fe158300 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe158300 0x0 0x20>; + }; + + qos_npu: qos@fe180000 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe180000 0x0 0x20>; + }; + + qos_pcie2x1: qos@fe190000 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe190000 0x0 0x20>; + }; + + qos_sata1: qos@fe190280 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe190280 0x0 0x20>; + }; + + qos_sata2: qos@fe190300 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe190300 0x0 0x20>; + }; + + qos_usb3_0: qos@fe190380 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe190380 0x0 0x20>; + }; + + qos_usb3_1: qos@fe190400 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe190400 0x0 0x20>; + }; + + qos_rkvdec: qos@fe198000 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe198000 0x0 0x20>; + }; + + qos_hdcp: qos@fe1a8000 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe1a8000 0x0 0x20>; + }; + + qos_vop_m0: qos@fe1a8080 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe1a8080 0x0 0x20>; + }; + + qos_vop_m1: qos@fe1a8100 { + compatible = "rockchip,rk3568-qos", "syscon"; + reg = <0x0 0xfe1a8100 0x0 0x20>; + }; + + sdmmc0: mmc@fe2b0000 { + compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xfe2b0000 0x0 0x4000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_SDMMC0>, <&cru CLK_SDMMC0>, + <&cru SCLK_SDMMC0_DRV>, <&cru SCLK_SDMMC0_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <150000000>; + resets = <&cru SRST_SDMMC0>; + reset-names = "reset"; + status = "disabled"; + }; + + sdmmc1: mmc@fe2c0000 { + compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xfe2c0000 0x0 0x4000>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_SDMMC1>, <&cru CLK_SDMMC1>, + <&cru SCLK_SDMMC1_DRV>, <&cru SCLK_SDMMC1_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <150000000>; + resets = <&cru SRST_SDMMC1>; + reset-names = "reset"; + status = "disabled"; + }; + + sdhci: mmc@fe310000 { + compatible = "rockchip,rk3568-dwcmshc"; + reg = <0x0 0xfe310000 0x0 0x10000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>; + assigned-clock-rates = <200000000>, <24000000>; + clocks = <&cru CCLK_EMMC>, <&cru HCLK_EMMC>, + <&cru ACLK_EMMC>, <&cru BCLK_EMMC>, + <&cru TCLK_EMMC>; + clock-names = "core", "bus", "axi", "block", "timer"; + status = "disabled"; + }; + + spdif: spdif@fe460000 { + compatible = "rockchip,rk3568-spdif"; + reg = <0x0 0xfe460000 0x0 0x1000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "mclk", "hclk"; + clocks = <&cru MCLK_SPDIF_8CH>, <&cru HCLK_SPDIF_8CH>; + dmas = <&dmac1 1>; + dma-names = "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spdifm0_tx>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s1_8ch: i2s@fe410000 { + compatible = "rockchip,rk3568-i2s-tdm"; + reg = <0x0 0xfe410000 0x0 0x1000>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + assigned-clocks = <&cru CLK_I2S1_8CH_TX_SRC>, <&cru CLK_I2S1_8CH_RX_SRC>; + assigned-clock-rates = <1188000000>, <1188000000>; + clocks = <&cru MCLK_I2S1_8CH_TX>, <&cru MCLK_I2S1_8CH_RX>, + <&cru HCLK_I2S1_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + dmas = <&dmac1 3>, <&dmac1 2>; + dma-names = "rx", "tx"; + resets = <&cru SRST_M_I2S1_8CH_TX>, <&cru SRST_M_I2S1_8CH_RX>; + reset-names = "tx-m", "rx-m"; + rockchip,grf = <&grf>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_sclkrx + &i2s1m0_lrcktx &i2s1m0_lrckrx + &i2s1m0_sdi0 &i2s1m0_sdi1 + &i2s1m0_sdi2 &i2s1m0_sdi3 + &i2s1m0_sdo0 &i2s1m0_sdo1 + &i2s1m0_sdo2 &i2s1m0_sdo3>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + dmac0: dmac@fe530000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xfe530000 0x0 0x4000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + arm,pl330-periph-burst; + clocks = <&cru ACLK_BUS>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + + dmac1: dmac@fe550000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xfe550000 0x0 0x4000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + arm,pl330-periph-burst; + clocks = <&cru ACLK_BUS>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + + i2c1: i2c@fe5a0000 { + compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfe5a0000 0x0 0x1000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>; + clock-names = "i2c", "pclk"; + pinctrl-0 = <&i2c1_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@fe5b0000 { + compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfe5b0000 0x0 0x1000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru CLK_I2C2>, <&cru PCLK_I2C2>; + clock-names = "i2c", "pclk"; + pinctrl-0 = <&i2c2m0_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@fe5c0000 { + compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfe5c0000 0x0 0x1000>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>; + clock-names = "i2c", "pclk"; + pinctrl-0 = <&i2c3m0_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@fe5d0000 { + compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfe5d0000 0x0 0x1000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru CLK_I2C4>, <&cru PCLK_I2C4>; + clock-names = "i2c", "pclk"; + pinctrl-0 = <&i2c4m0_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@fe5e0000 { + compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xfe5e0000 0x0 0x1000>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru CLK_I2C5>, <&cru PCLK_I2C5>; + clock-names = "i2c", "pclk"; + pinctrl-0 = <&i2c5m0_xfer>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + wdt: watchdog@fe600000 { + compatible = "rockchip,rk3568-wdt", "snps,dw-wdt"; + reg = <0x0 0xfe600000 0x0 0x100>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru TCLK_WDT_NS>, <&cru PCLK_WDT_NS>; + clock-names = "tclk", "pclk"; + }; + + uart1: serial@fe650000 { + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfe650000 0x0 0x100>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 2>, <&dmac0 3>; + pinctrl-0 = <&uart1m0_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart2: serial@fe660000 { + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfe660000 0x0 0x100>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 4>, <&dmac0 5>; + pinctrl-0 = <&uart2m0_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart3: serial@fe670000 { + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfe670000 0x0 0x100>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 6>, <&dmac0 7>; + pinctrl-0 = <&uart3m0_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart4: serial@fe680000 { + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfe680000 0x0 0x100>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 8>, <&dmac0 9>; + pinctrl-0 = <&uart4m0_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart5: serial@fe690000 { + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfe690000 0x0 0x100>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 10>, <&dmac0 11>; + pinctrl-0 = <&uart5m0_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart6: serial@fe6a0000 { + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfe6a0000 0x0 0x100>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 12>, <&dmac0 13>; + pinctrl-0 = <&uart6m0_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart7: serial@fe6b0000 { + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfe6b0000 0x0 0x100>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 14>, <&dmac0 15>; + pinctrl-0 = <&uart7m0_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart8: serial@fe6c0000 { + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfe6c0000 0x0 0x100>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART8>, <&cru PCLK_UART8>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 16>, <&dmac0 17>; + pinctrl-0 = <&uart8m0_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart9: serial@fe6d0000 { + compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart"; + reg = <0x0 0xfe6d0000 0x0 0x100>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART9>, <&cru PCLK_UART9>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 18>, <&dmac0 19>; + pinctrl-0 = <&uart9m0_xfer>; + pinctrl-names = "default"; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + thermal_zones: thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <100>; + polling-delay = <1000>; + + thermal-sensors = <&tsadc 0>; + + trips { + cpu_alert0: cpu_alert0 { + temperature = <70000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_alert1: cpu_alert1 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit: cpu_crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + gpu_thermal: gpu-thermal { + polling-delay-passive = <20>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + + thermal-sensors = <&tsadc 1>; + }; + }; + + tsadc: tsadc@fe710000 { + compatible = "rockchip,rk3568-tsadc"; + reg = <0x0 0xfe710000 0x0 0x100>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + assigned-clocks = <&cru CLK_TSADC_TSEN>, <&cru CLK_TSADC>; + assigned-clock-rates = <17000000>, <700000>; + clocks = <&cru CLK_TSADC>, <&cru PCLK_TSADC>; + clock-names = "tsadc", "apb_pclk"; + resets = <&cru SRST_P_TSADC>, <&cru SRST_TSADC>, + <&cru SRST_TSADCPHY>; + rockchip,grf = <&grf>; + rockchip,hw-tshut-temp = <95000>; + pinctrl-names = "init", "default", "sleep"; + pinctrl-0 = <&tsadc_pin>; + pinctrl-1 = <&tsadc_shutorg>; + pinctrl-2 = <&tsadc_pin>; + #thermal-sensor-cells = <1>; + status = "disabled"; + }; + + saradc: saradc@fe720000 { + compatible = "rockchip,rk3568-saradc", "rockchip,rk3399-saradc"; + reg = <0x0 0xfe720000 0x0 0x100>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + resets = <&cru SRST_P_SARADC>; + reset-names = "saradc-apb"; + #io-channel-cells = <1>; + status = "disabled"; + }; + + pwm4: pwm@fe6e0000 { + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfe6e0000 0x0 0x10>; + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm4_pins>; + pinctrl-names = "active"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm5: pwm@fe6e0010 { + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfe6e0010 0x0 0x10>; + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm5_pins>; + pinctrl-names = "active"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm6: pwm@fe6e0020 { + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfe6e0020 0x0 0x10>; + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm6_pins>; + pinctrl-names = "active"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm7: pwm@fe6e0030 { + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfe6e0030 0x0 0x10>; + clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm7_pins>; + pinctrl-names = "active"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm8: pwm@fe6f0000 { + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfe6f0000 0x0 0x10>; + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm8m0_pins>; + pinctrl-names = "active"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm9: pwm@fe6f0010 { + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfe6f0010 0x0 0x10>; + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm9m0_pins>; + pinctrl-names = "active"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm10: pwm@fe6f0020 { + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfe6f0020 0x0 0x10>; + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm10m0_pins>; + pinctrl-names = "active"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm11: pwm@fe6f0030 { + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfe6f0030 0x0 0x10>; + clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm11m0_pins>; + pinctrl-names = "active"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm12: pwm@fe700000 { + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfe700000 0x0 0x10>; + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm12m0_pins>; + pinctrl-names = "active"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm13: pwm@fe700010 { + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfe700010 0x0 0x10>; + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm13m0_pins>; + pinctrl-names = "active"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm14: pwm@fe700020 { + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfe700020 0x0 0x10>; + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm14m0_pins>; + pinctrl-names = "active"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm15: pwm@fe700030 { + compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xfe700030 0x0 0x10>; + clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>; + clock-names = "pwm", "pclk"; + pinctrl-0 = <&pwm15m0_pins>; + pinctrl-names = "active"; + #pwm-cells = <3>; + status = "disabled"; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rk3568-pinctrl"; + rockchip,grf = <&grf>; + rockchip,pmu = <&pmugrf>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio0: gpio@fdd60000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xfdd60000 0x0 0x100>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmucru PCLK_GPIO0>, <&pmucru DBCLK_GPIO0>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@fe740000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xfe740000 0x0 0x100>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@fe750000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xfe750000 0x0 0x100>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@fe760000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xfe760000 0x0 0x100>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@fe770000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xfe770000 0x0 0x100>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; + +#include "rk3568-pinctrl.dtsi" diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index d56c742f5a10..71f6097d4621 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -8,12 +8,14 @@ dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721e-common-proc-board.dtb +dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb dtb-$(CONFIG_ARCH_K3) += k3-j7200-common-proc-board.dtb dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb - dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi index 42d1d219a3fd..5ad638b95ffc 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi @@ -973,4 +973,284 @@ clocks = <&k3_clks 53 0>; clock-names = "fck"; }; + + icssg0: icssg@30000000 { + compatible = "ti,am642-icssg"; + reg = <0x00 0x30000000 0x00 0x80000>; + power-domains = <&k3_pds 81 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x30000000 0x80000>; + + icssg0_mem: memories@0 { + reg = <0x0 0x2000>, + <0x2000 0x2000>, + <0x10000 0x10000>; + reg-names = "dram0", "dram1", "shrdram2"; + }; + + icssg0_cfg: cfg@26000 { + compatible = "ti,pruss-cfg", "syscon"; + reg = <0x26000 0x200>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x26000 0x2000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + icssg0_coreclk_mux: coreclk-mux@3c { + reg = <0x3c>; + #clock-cells = <0>; + clocks = <&k3_clks 81 0>, /* icssg0_core_clk */ + <&k3_clks 81 20>; /* icssg0_iclk */ + assigned-clocks = <&icssg0_coreclk_mux>; + assigned-clock-parents = <&k3_clks 81 20>; + }; + + icssg0_iepclk_mux: iepclk-mux@30 { + reg = <0x30>; + #clock-cells = <0>; + clocks = <&k3_clks 81 3>, /* icssg0_iep_clk */ + <&icssg0_coreclk_mux>; /* icssg0_coreclk_mux */ + assigned-clocks = <&icssg0_iepclk_mux>; + assigned-clock-parents = <&icssg0_coreclk_mux>; + }; + }; + }; + + icssg0_mii_rt: mii-rt@32000 { + compatible = "ti,pruss-mii", "syscon"; + reg = <0x32000 0x100>; + }; + + icssg0_mii_g_rt: mii-g-rt@33000 { + compatible = "ti,pruss-mii-g", "syscon"; + reg = <0x33000 0x1000>; + }; + + icssg0_intc: interrupt-controller@20000 { + compatible = "ti,icssg-intc"; + reg = <0x20000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host_intr0", "host_intr1", + "host_intr2", "host_intr3", + "host_intr4", "host_intr5", + "host_intr6", "host_intr7"; + }; + + pru0_0: pru@34000 { + compatible = "ti,am642-pru"; + reg = <0x34000 0x3000>, + <0x22000 0x100>, + <0x22400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am64x-pru0_0-fw"; + }; + + rtu0_0: rtu@4000 { + compatible = "ti,am642-rtu"; + reg = <0x4000 0x2000>, + <0x23000 0x100>, + <0x23400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am64x-rtu0_0-fw"; + }; + + tx_pru0_0: txpru@a000 { + compatible = "ti,am642-tx-pru"; + reg = <0xa000 0x1800>, + <0x25000 0x100>, + <0x25400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am64x-txpru0_0-fw"; + }; + + pru0_1: pru@38000 { + compatible = "ti,am642-pru"; + reg = <0x38000 0x3000>, + <0x24000 0x100>, + <0x24400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am64x-pru0_1-fw"; + }; + + rtu0_1: rtu@6000 { + compatible = "ti,am642-rtu"; + reg = <0x6000 0x2000>, + <0x23800 0x100>, + <0x23c00 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am64x-rtu0_1-fw"; + }; + + tx_pru0_1: txpru@c000 { + compatible = "ti,am642-tx-pru"; + reg = <0xc000 0x1800>, + <0x25800 0x100>, + <0x25c00 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am64x-txpru0_1-fw"; + }; + + icssg0_mdio: mdio@32400 { + compatible = "ti,davinci_mdio"; + reg = <0x32400 0x100>; + clocks = <&k3_clks 62 3>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <0>; + bus_freq = <1000000>; + }; + }; + + icssg1: icssg@30080000 { + compatible = "ti,am642-icssg"; + reg = <0x00 0x30080000 0x00 0x80000>; + power-domains = <&k3_pds 82 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x30080000 0x80000>; + + icssg1_mem: memories@0 { + reg = <0x0 0x2000>, + <0x2000 0x2000>, + <0x10000 0x10000>; + reg-names = "dram0", "dram1", "shrdram2"; + }; + + icssg1_cfg: cfg@26000 { + compatible = "ti,pruss-cfg", "syscon"; + reg = <0x26000 0x200>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x26000 0x2000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + icssg1_coreclk_mux: coreclk-mux@3c { + reg = <0x3c>; + #clock-cells = <0>; + clocks = <&k3_clks 82 0>, /* icssg1_core_clk */ + <&k3_clks 82 20>; /* icssg1_iclk */ + assigned-clocks = <&icssg1_coreclk_mux>; + assigned-clock-parents = <&k3_clks 82 20>; + }; + + icssg1_iepclk_mux: iepclk-mux@30 { + reg = <0x30>; + #clock-cells = <0>; + clocks = <&k3_clks 82 3>, /* icssg1_iep_clk */ + <&icssg1_coreclk_mux>; /* icssg1_coreclk_mux */ + assigned-clocks = <&icssg1_iepclk_mux>; + assigned-clock-parents = <&icssg1_coreclk_mux>; + }; + }; + }; + + icssg1_mii_rt: mii-rt@32000 { + compatible = "ti,pruss-mii", "syscon"; + reg = <0x32000 0x100>; + }; + + icssg1_mii_g_rt: mii-g-rt@33000 { + compatible = "ti,pruss-mii-g", "syscon"; + reg = <0x33000 0x1000>; + }; + + icssg1_intc: interrupt-controller@20000 { + compatible = "ti,icssg-intc"; + reg = <0x20000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host_intr0", "host_intr1", + "host_intr2", "host_intr3", + "host_intr4", "host_intr5", + "host_intr6", "host_intr7"; + }; + + pru1_0: pru@34000 { + compatible = "ti,am642-pru"; + reg = <0x34000 0x4000>, + <0x22000 0x100>, + <0x22400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am64x-pru1_0-fw"; + }; + + rtu1_0: rtu@4000 { + compatible = "ti,am642-rtu"; + reg = <0x4000 0x2000>, + <0x23000 0x100>, + <0x23400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am64x-rtu1_0-fw"; + }; + + tx_pru1_0: txpru@a000 { + compatible = "ti,am642-tx-pru"; + reg = <0xa000 0x1800>, + <0x25000 0x100>, + <0x25400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am64x-txpru1_0-fw"; + }; + + pru1_1: pru@38000 { + compatible = "ti,am642-pru"; + reg = <0x38000 0x4000>, + <0x24000 0x100>, + <0x24400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am64x-pru1_1-fw"; + }; + + rtu1_1: rtu@6000 { + compatible = "ti,am642-rtu"; + reg = <0x6000 0x2000>, + <0x23800 0x100>, + <0x23c00 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am64x-rtu1_1-fw"; + }; + + tx_pru1_1: txpru@c000 { + compatible = "ti,am642-tx-pru"; + reg = <0xc000 0x1800>, + <0x25800 0x100>, + <0x25c00 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am64x-txpru1_1-fw"; + }; + + icssg1_mdio: mdio@32400 { + compatible = "ti,davinci_mdio"; + reg = <0x32400 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 82 0>; + clock-names = "fck"; + bus_freq = <1000000>; + }; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi index 59cc58f7d0c8..2bb5c9ff172c 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi @@ -97,4 +97,12 @@ clocks = <&k3_clks 79 0>; clock-names = "gpio"; }; + + mcu_pmx0: pinctrl@4084000 { + compatible = "pinctrl-single"; + reg = <0x00 0x4084000 0x00 0x84>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am64.dtsi b/arch/arm64/boot/dts/ti/k3-am64.dtsi index de6805b0c72c..120974726be8 100644 --- a/arch/arm64/boot/dts/ti/k3-am64.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64.dtsi @@ -30,6 +30,8 @@ serial8 = &main_uart6; ethernet0 = &cpsw_port1; ethernet1 = &cpsw_port2; + mmc0 = &sdhci0; + mmc1 = &sdhci1; }; chosen { }; diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts index 24ce4942618d..6726c4c7c28c 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts @@ -630,3 +630,11 @@ &epwm8 { status = "disabled"; }; + +&icssg0_mdio { + status = "disabled"; +}; + +&icssg1_mdio { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts index 6b45cdeeeefa..6b04745147be 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts @@ -517,3 +517,11 @@ &epwm8 { status = "disabled"; }; + +&icssg0_mdio { + status = "disabled"; +}; + +&icssg1_mdio { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi new file mode 100644 index 000000000000..51f902fa35a7 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) Siemens AG, 2021 + * + * Authors: + * Jan Kiszka <jan.kiszka@siemens.com> + * + * Common bits of the IOT2050 Basic and Advanced variants, PG1 + */ + +&dss { + assigned-clocks = <&k3_clks 67 2>; + assigned-clock-parents = <&k3_clks 67 5>; +}; + +&serdes0 { + status = "disabled"; +}; + +&sdhci1 { + no-1-8-v; +}; + +&tx_pru0_0 { + status = "disabled"; +}; + +&tx_pru0_1 { + status = "disabled"; +}; + +&tx_pru1_0 { + status = "disabled"; +}; + +&tx_pru1_1 { + status = "disabled"; +}; + +&tx_pru2_0 { + status = "disabled"; +}; + +&tx_pru2_1 { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi new file mode 100644 index 000000000000..e73458ca6900 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) Siemens AG, 2021 + * + * Authors: + * Chao Zeng <chao.zeng@siemens.com> + * Jan Kiszka <jan.kiszka@siemens.com> + * + * Common bits of the IOT2050 Basic and Advanced variants, PG2 + */ + +&main_pmx0 { + cp2102n_reset_pin_default: cp2102n-reset-pin-default { + pinctrl-single,pins = < + /* (AF12) GPIO1_24, used as cp2102 reset */ + AM65X_IOPAD(0x01e0, PIN_OUTPUT, 7) + >; + }; +}; + +&main_gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&cp2102n_reset_pin_default>; + gpio-line-names = + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "CP2102N-RESET"; +}; + +&dss { + /* Workaround needed to get DP clock of 154Mhz */ + assigned-clocks = <&k3_clks 67 0>; +}; + +&serdes0 { + assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>; + assigned-clock-parents = <&k3_clks 153 7>, <&k3_clks 153 4>; +}; + +&dwc3_0 { + assigned-clock-parents = <&k3_clks 151 4>, /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */ + <&k3_clks 151 8>; /* set PIPE3_TXB_CLK to WIZ8B2M4VSB */ + phys = <&serdes0 PHY_TYPE_USB3 0>; + phy-names = "usb3-phy"; +}; + +&usb0 { + maximum-speed = "super-speed"; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi index 1008e9162ba2..65da226847f4 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi @@ -4,19 +4,19 @@ * * Authors: * Le Jin <le.jin@siemens.com> - * Jan Kiszka <jan.kiszk@siemens.com> + * Jan Kiszka <jan.kiszka@siemens.com> * - * Common bits of the IOT2050 Basic and Advanced variants + * Common bits of the IOT2050 Basic and Advanced variants, PG1 and PG2 */ -/dts-v1/; - #include "k3-am654.dtsi" #include <dt-bindings/phy/phy.h> / { aliases { spi0 = &mcu_spi0; + mmc0 = &sdhci1; + mmc1 = &sdhci0; }; chosen { @@ -555,7 +555,6 @@ pinctrl-0 = <&main_mmc1_pins_default>; ti,driver-strength-ohm = <50>; disable-wp; - no-1-8-v; }; &usb0 { @@ -629,10 +628,6 @@ }; }; -&serdes0 { - status = "disabled"; -}; - &pcie0_rc { status = "disabled"; }; @@ -656,11 +651,21 @@ }; &mailbox0_cluster0 { - status = "disabled"; + interrupts = <436>; + + mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { + ti,mbox-tx = <1 0 0>; + ti,mbox-rx = <0 0 0>; + }; }; &mailbox0_cluster1 { - status = "disabled"; + interrupts = <432>; + + mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { + ti,mbox-tx = <1 0 0>; + ti,mbox-rx = <0 0 0>; + }; }; &mailbox0_cluster2 { @@ -703,6 +708,18 @@ status = "disabled"; }; +&mcu_r5fss0_core0 { + memory-region = <&mcu_r5fss0_core0_dma_memory_region>, + <&mcu_r5fss0_core0_memory_region>; + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; +}; + +&mcu_r5fss0_core1 { + memory-region = <&mcu_r5fss0_core1_dma_memory_region>, + <&mcu_r5fss0_core1_memory_region>; + mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>; +}; + &icssg0_mdio { status = "disabled"; }; diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index ba4e5d3e1ed7..ce8bb4a61011 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -692,8 +692,8 @@ power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0 0x0 0x10020000 0 0x00010000 - 0x82000000 0 0x10030000 0x0 0x10030000 0 0x07FD0000>; + ranges = <0x81000000 0 0 0x0 0x10020000 0 0x00010000>, + <0x82000000 0 0x10030000 0x0 0x10030000 0 0x07FD0000>; ti,syscon-pcie-id = <&pcie_devid>; ti,syscon-pcie-mode = <&pcie0_mode>; bus-range = <0x0 0xff>; @@ -725,8 +725,8 @@ power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>; #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0 0x0 0x18020000 0 0x00010000 - 0x82000000 0 0x18030000 0x0 0x18030000 0 0x07FD0000>; + ranges = <0x81000000 0 0 0x0 0x18020000 0 0x00010000>, + <0x82000000 0 0x18030000 0x0 0x18030000 0 0x07FD0000>; ti,syscon-pcie-id = <&pcie_devid>; ti,syscon-pcie-mode = <&pcie1_mode>; bus-range = <0x0 0xff>; diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi index 9d21cdf6fce8..9c69d0917f69 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi @@ -100,8 +100,4 @@ power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>; #thermal-sensor-cells = <1>; }; - - thermal_zones: thermal-zones { - #include "k3-am654-industrial-thermal.dtsi" - }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi index a9fc1af03f27..a58a39fa42db 100644 --- a/arch/arm64/boot/dts/ti/k3-am65.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi @@ -31,6 +31,8 @@ i2c4 = &main_i2c2; i2c5 = &main_i2c3; ethernet0 = &cpsw_port1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; }; chosen { }; diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi new file mode 100644 index 000000000000..4a9bf7d7c07d --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) Siemens AG, 2018-2021 + * + * Authors: + * Le Jin <le.jin@siemens.com> + * Jan Kiszka <jan.kiszka@siemens.com> + * + * Common bits of the IOT2050 Basic variant, PG1 and PG2 + */ + +#include "k3-am65-iot2050-common.dtsi" + +/ { + memory@80000000 { + device_type = "memory"; + /* 1G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x40000000>; + }; + + cpus { + cpu-map { + /delete-node/ cluster1; + }; + /delete-node/ cpu@100; + /delete-node/ cpu@101; + }; + + /delete-node/ l2-cache1; +}; + +/* eMMC */ +&sdhci0 { + status = "disabled"; +}; + +&main_pmx0 { + main_uart0_pins_default: main-uart0-pins-default { + pinctrl-single,pins = < + AM65X_IOPAD(0x01e4, PIN_INPUT, 0) /* (AF11) UART0_RXD */ + AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0) /* (AE11) UART0_TXD */ + AM65X_IOPAD(0x01ec, PIN_INPUT, 0) /* (AG11) UART0_CTSn */ + AM65X_IOPAD(0x01f0, PIN_OUTPUT, 0) /* (AD11) UART0_RTSn */ + AM65X_IOPAD(0x0188, PIN_INPUT, 1) /* (D25) UART0_DCDn */ + AM65X_IOPAD(0x018c, PIN_INPUT, 1) /* (B26) UART0_DSRn */ + AM65X_IOPAD(0x0190, PIN_OUTPUT, 1) /* (A24) UART0_DTRn */ + AM65X_IOPAD(0x0194, PIN_INPUT, 1) /* (E24) UART0_RIN */ + >; + }; +}; + +&main_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; +}; + +&mcu_r5fss0 { + /* lock-step mode not supported on Basic boards */ + ti,cluster-mode = <0>; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-pg2.dts b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-pg2.dts new file mode 100644 index 000000000000..c62549a4b436 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-pg2.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) Siemens AG, 2018-2021 + * + * Authors: + * Le Jin <le.jin@siemens.com> + * Jan Kiszka <jan.kiszka@siemens.com> + * + * AM6528-based (dual-core) IOT2050 Basic variant, Product Generation 2 + * 1 GB RAM, no eMMC, main_uart0 on connector X30 + * + * Product homepage: + * https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html + */ + +/dts-v1/; + +#include "k3-am6528-iot2050-basic-common.dtsi" +#include "k3-am65-iot2050-common-pg2.dtsi" + +/ { + compatible = "siemens,iot2050-basic-pg2", "ti,am654"; + model = "SIMATIC IOT2050 Basic PG2"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts index 94bb5dd39122..87928ff28214 100644 --- a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts +++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts @@ -4,63 +4,21 @@ * * Authors: * Le Jin <le.jin@siemens.com> - * Jan Kiszka <jan.kiszk@siemens.com> + * Jan Kiszka <jan.kiszka@siemens.com> * - * AM6528-based (dual-core) IOT2050 Basic variant + * AM6528-based (dual-core) IOT2050 Basic variant, Product Generation 1 * 1 GB RAM, no eMMC, main_uart0 on connector X30 + * + * Product homepage: + * https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html */ /dts-v1/; -#include "k3-am65-iot2050-common.dtsi" +#include "k3-am6528-iot2050-basic-common.dtsi" +#include "k3-am65-iot2050-common-pg1.dtsi" / { compatible = "siemens,iot2050-basic", "ti,am654"; model = "SIMATIC IOT2050 Basic"; - - memory@80000000 { - device_type = "memory"; - /* 1G RAM */ - reg = <0x00000000 0x80000000 0x00000000 0x40000000>; - }; - - cpus { - cpu-map { - /delete-node/ cluster1; - }; - /delete-node/ cpu@100; - /delete-node/ cpu@101; - }; - - /delete-node/ l2-cache1; -}; - -/* eMMC */ -&sdhci0 { - status = "disabled"; -}; - -&main_pmx0 { - main_uart0_pins_default: main-uart0-pins-default { - pinctrl-single,pins = < - AM65X_IOPAD(0x01e4, PIN_INPUT, 0) /* (AF11) UART0_RXD */ - AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0) /* (AE11) UART0_TXD */ - AM65X_IOPAD(0x01ec, PIN_INPUT, 0) /* (AG11) UART0_CTSn */ - AM65X_IOPAD(0x01f0, PIN_OUTPUT, 0) /* (AD11) UART0_RTSn */ - AM65X_IOPAD(0x0188, PIN_INPUT, 1) /* (D25) UART0_DCDn */ - AM65X_IOPAD(0x018c, PIN_INPUT, 1) /* (B26) UART0_DSRn */ - AM65X_IOPAD(0x0190, PIN_OUTPUT, 1) /* (A24) UART0_DTRn */ - AM65X_IOPAD(0x0194, PIN_INPUT, 1) /* (E24) UART0_RIN */ - >; - }; -}; - -&main_uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&main_uart0_pins_default>; -}; - -&mcu_r5fss0 { - /* lock-step mode not supported on this board */ - ti,cluster-mode = <0>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am654.dtsi b/arch/arm64/boot/dts/ti/k3-am654.dtsi index f0a6541b8042..a89257900047 100644 --- a/arch/arm64/boot/dts/ti/k3-am654.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am654.dtsi @@ -112,4 +112,8 @@ compatible = "cache"; cache-level = <3>; }; + + thermal_zones: thermal-zones { + #include "k3-am654-industrial-thermal.dtsi" + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi new file mode 100644 index 000000000000..d25e8b26187f --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) Siemens AG, 2018-2021 + * + * Authors: + * Le Jin <le.jin@siemens.com> + * Jan Kiszka <jan.kiszka@siemens.com> + * + * Common bits of the IOT2050 Advanced variant, PG1 and PG2 + */ + +/dts-v1/; + +#include "k3-am65-iot2050-common.dtsi" + +/ { + memory@80000000 { + device_type = "memory"; + /* 2G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>; + }; +}; + +&main_pmx0 { + main_mmc0_pins_default: main-mmc0-pins-default { + pinctrl-single,pins = < + AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */ + AM65X_IOPAD(0x01ac, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */ + AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP, 0) /* (A26) MMC0_DAT0 */ + AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP, 0) /* (E25) MMC0_DAT1 */ + AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP, 0) /* (C26) MMC0_DAT2 */ + AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP, 0) /* (A25) MMC0_DAT3 */ + AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP, 0) /* (E24) MMC0_DAT4 */ + AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0) /* (A24) MMC0_DAT5 */ + AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0) /* (B26) MMC0_DAT6 */ + AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0) /* (D25) MMC0_DAT7 */ + AM65X_IOPAD(0x01b8, PIN_OUTPUT_PULLUP, 7) /* (B23) MMC0_SDWP */ + AM65X_IOPAD(0x01b4, PIN_INPUT_PULLUP, 0) /* (A23) MMC0_SDCD */ + AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */ + >; + }; +}; + +/* eMMC */ +&sdhci0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc0_pins_default>; + bus-width = <8>; + non-removable; + ti,driver-strength-ohm = <50>; + disable-wp; +}; + +&main_uart0 { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts new file mode 100644 index 000000000000..f00dc86d01b9 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) Siemens AG, 2018-2021 + * + * Authors: + * Le Jin <le.jin@siemens.com> + * Jan Kiszka <jan.kiszka@siemens.com> + * + * AM6548-based (quad-core) IOT2050 Advanced variant, Product Generation 2 + * 2 GB RAM, 16 GB eMMC, USB-serial converter on connector X30 + * + * Product homepage: + * https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html + */ + +/dts-v1/; + +#include "k3-am6548-iot2050-advanced-common.dtsi" +#include "k3-am65-iot2050-common-pg2.dtsi" + +/ { + compatible = "siemens,iot2050-advanced-pg2", "ti,am654"; + model = "SIMATIC IOT2050 Advanced PG2"; +}; + +&mcu_r5fss0 { + /* lock-step mode not supported on this board */ + ti,cluster-mode = <0>; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts index ec9617c13cdb..077f165bdc68 100644 --- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts +++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts @@ -4,57 +4,21 @@ * * Authors: * Le Jin <le.jin@siemens.com> - * Jan Kiszka <jan.kiszk@siemens.com> + * Jan Kiszka <jan.kiszka@siemens.com> * - * AM6548-based (quad-core) IOT2050 Advanced variant + * AM6548-based (quad-core) IOT2050 Advanced variant, Product Generation 1 * 2 GB RAM, 16 GB eMMC, USB-serial converter on connector X30 + * + * Product homepage: + * https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html */ /dts-v1/; -#include "k3-am65-iot2050-common.dtsi" +#include "k3-am6548-iot2050-advanced-common.dtsi" +#include "k3-am65-iot2050-common-pg1.dtsi" / { compatible = "siemens,iot2050-advanced", "ti,am654"; model = "SIMATIC IOT2050 Advanced"; - - memory@80000000 { - device_type = "memory"; - /* 2G RAM */ - reg = <0x00000000 0x80000000 0x00000000 0x80000000>; - }; -}; - -&main_pmx0 { - main_mmc0_pins_default: main-mmc0-pins-default { - pinctrl-single,pins = < - AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */ - AM65X_IOPAD(0x01ac, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */ - AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP, 0) /* (A26) MMC0_DAT0 */ - AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP, 0) /* (E25) MMC0_DAT1 */ - AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP, 0) /* (C26) MMC0_DAT2 */ - AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP, 0) /* (A25) MMC0_DAT3 */ - AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP, 0) /* (E24) MMC0_DAT4 */ - AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0) /* (A24) MMC0_DAT5 */ - AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0) /* (B26) MMC0_DAT6 */ - AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0) /* (D25) MMC0_DAT7 */ - AM65X_IOPAD(0x01b8, PIN_OUTPUT_PULLUP, 7) /* (B23) MMC0_SDWP */ - AM65X_IOPAD(0x01b4, PIN_INPUT_PULLUP, 0) /* (A23) MMC0_SDCD */ - AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */ - >; - }; -}; - -/* eMMC */ -&sdhci0 { - pinctrl-names = "default"; - pinctrl-0 = <&main_mmc0_pins_default>; - bus-width = <8>; - non-removable; - ti,driver-strength-ohm = <50>; - disable-wp; -}; - -&main_uart0 { - status = "disabled"; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts index d14f3c18b65f..121975dc8239 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts @@ -12,6 +12,9 @@ #include <dt-bindings/phy/phy.h> / { + compatible = "ti,j7200-evm", "ti,j7200"; + model = "Texas Instruments J7200 EVM"; + chosen { stdout-path = "serial2:115200n8"; bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000"; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index e8a41d09b45f..d60ef4f7dd0b 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -606,10 +606,10 @@ clock-names = "fck"; #address-cells = <3>; #size-cells = <2>; - bus-range = <0x0 0xf>; + bus-range = <0x0 0xff>; cdns,no-bar-match-nbits = <64>; - vendor-id = /bits/ 16 <0x104c>; - device-id = /bits/ 16 <0xb00f>; + vendor-id = <0x104c>; + device-id = <0xb00f>; msi-map = <0x0 &gic_its 0x0 0x10000>; dma-coherent; ranges = <0x01000000 0x0 0x18001000 0x00 0x18001000 0x0 0x0010000>, @@ -633,6 +633,7 @@ clocks = <&k3_clks 240 6>; clock-names = "fck"; max-functions = /bits/ 8 <6>; + max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>; dma-coherent; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200.dtsi b/arch/arm64/boot/dts/ti/k3-j7200.dtsi index b7005b803149..47567cb260c2 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200.dtsi @@ -30,6 +30,8 @@ serial9 = &main_uart7; serial10 = &main_uart8; serial11 = &main_uart9; + mmc0 = &main_sdhci0; + mmc1 = &main_sdhci1; }; chosen { }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts index 8bd02d9e28ad..dc2bc67f9f48 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts @@ -12,6 +12,9 @@ #include <dt-bindings/phy/phy-cadence.h> / { + compatible = "ti,j721e-evm", "ti,j721e"; + model = "Texas Instruments J721e EVM"; + chosen { stdout-path = "serial2:115200n8"; bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000"; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index cf3482376c1e..08c8d1b47dcd 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -610,7 +610,7 @@ clock-names = "fck"; #address-cells = <3>; #size-cells = <2>; - bus-range = <0x0 0xf>; + bus-range = <0x0 0xff>; vendor-id = <0x104c>; device-id = <0xb00d>; msi-map = <0x0 &gic_its 0x0 0x10000>; @@ -636,7 +636,7 @@ clocks = <&k3_clks 239 1>; clock-names = "fck"; max-functions = /bits/ 8 <6>; - max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>; + max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>; dma-coherent; }; @@ -658,7 +658,7 @@ clock-names = "fck"; #address-cells = <3>; #size-cells = <2>; - bus-range = <0x0 0xf>; + bus-range = <0x0 0xff>; vendor-id = <0x104c>; device-id = <0xb00d>; msi-map = <0x0 &gic_its 0x10000 0x10000>; @@ -684,7 +684,7 @@ clocks = <&k3_clks 240 1>; clock-names = "fck"; max-functions = /bits/ 8 <6>; - max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>; + max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>; dma-coherent; }; @@ -706,7 +706,7 @@ clock-names = "fck"; #address-cells = <3>; #size-cells = <2>; - bus-range = <0x0 0xf>; + bus-range = <0x0 0xff>; vendor-id = <0x104c>; device-id = <0xb00d>; msi-map = <0x0 &gic_its 0x20000 0x10000>; @@ -732,7 +732,7 @@ clocks = <&k3_clks 241 1>; clock-names = "fck"; max-functions = /bits/ 8 <6>; - max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>; + max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>; dma-coherent; }; @@ -754,7 +754,7 @@ clock-names = "fck"; #address-cells = <3>; #size-cells = <2>; - bus-range = <0x0 0xf>; + bus-range = <0x0 0xff>; vendor-id = <0x104c>; device-id = <0xb00d>; msi-map = <0x0 &gic_its 0x30000 0x10000>; @@ -780,7 +780,7 @@ clocks = <&k3_clks 242 1>; clock-names = "fck"; max-functions = /bits/ 8 <6>; - max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>; + max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>; dma-coherent; #address-cells = <2>; #size-cells = <2>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts new file mode 100644 index 000000000000..b726310d867c --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts @@ -0,0 +1,1002 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/ + * + * J721E SK URL: https://www.ti.com/tool/SK-TDA4VM + */ + +/dts-v1/; + +#include "k3-j721e.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/net/ti-dp83867.h> + +/ { + compatible = "ti,j721e-sk", "ti,j721e"; + model = "Texas Instruments J721E SK"; + + chosen { + stdout-path = "serial2:115200n8"; + bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000"; + }; + + memory@80000000 { + device_type = "memory"; + /* 4G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000000 0x80000000>; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; + alignment = <0x1000>; + no-map; + }; + + mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0000000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0100000 0x00 0xf00000>; + no-map; + }; + + mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1000000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core0_memory_region: r5f-memory@a2100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core1_memory_region: r5f-memory@a3100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa4000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core0_memory_region: r5f-memory@a4100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa4100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa5000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core1_memory_region: r5f-memory@a5100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa5100000 0x00 0xf00000>; + no-map; + }; + + c66_1_dma_memory_region: c66-dma-memory@a6000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa6000000 0x00 0x100000>; + no-map; + }; + + c66_0_memory_region: c66-memory@a6100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa6100000 0x00 0xf00000>; + no-map; + }; + + c66_0_dma_memory_region: c66-dma-memory@a7000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa7000000 0x00 0x100000>; + no-map; + }; + + c66_1_memory_region: c66-memory@a7100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa7100000 0x00 0xf00000>; + no-map; + }; + + c71_0_dma_memory_region: c71-dma-memory@a8000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa8000000 0x00 0x100000>; + no-map; + }; + + c71_0_memory_region: c71-memory@a8100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa8100000 0x00 0xf00000>; + no-map; + }; + + rtos_ipc_memory_region: ipc-memories@aa000000 { + reg = <0x00 0xaa000000 0x00 0x01c00000>; + alignment = <0x1000>; + no-map; + }; + }; + + vusb_main: fixedregulator-vusb-main5v0 { + /* USB MAIN INPUT 5V DC */ + compatible = "regulator-fixed"; + regulator-name = "vusb-main5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_3v3: fixedregulator-vsys3v3 { + /* Output of LM5141 */ + compatible = "regulator-fixed"; + regulator-name = "vsys_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vusb_main>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_mmc1: fixedregulator-sd { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_mmc1_en_pins_default>; + regulator-name = "vdd_mmc1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + vin-supply = <&vsys_3v3>; + gpio = <&wkup_gpio0 8 GPIO_ACTIVE_HIGH>; + }; + + vdd_sd_dv_alt: gpio-regulator-tps659411 { + compatible = "regulator-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_sd_dv_alt_pins_default>; + regulator-name = "tps659411"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + vin-supply = <&vsys_3v3>; + gpios = <&wkup_gpio0 9 GPIO_ACTIVE_HIGH>; + states = <1800000 0x0>, + <3300000 0x1>; + }; + + dp_pwr_3v3: fixedregulator-dp-prw { + compatible = "regulator-fixed"; + regulator-name = "dp-pwr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&dp_pwr_en_pins_default>; + gpio = <&main_gpio0 111 0>; /* DP0_3V3 _EN */ + enable-active-high; + }; + +}; + +&main_pmx0 { + main_mmc1_pins_default: main-mmc1-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */ + J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */ + J721E_IOPAD(0x2ac, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */ + J721E_IOPAD(0x24c, PIN_INPUT, 0) /* (R24) MMC1_DAT0 */ + J721E_IOPAD(0x248, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */ + J721E_IOPAD(0x244, PIN_INPUT, 0) /* (R25) MMC1_DAT2 */ + J721E_IOPAD(0x240, PIN_INPUT, 0) /* (R26) MMC1_DAT3 */ + J721E_IOPAD(0x258, PIN_INPUT, 0) /* (P23) MMC1_SDCD */ + >; + }; + + main_uart0_pins_default: main-uart0-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x1f0, PIN_INPUT, 0) /* (AC2) UART0_CTSn */ + J721E_IOPAD(0x1f4, PIN_OUTPUT, 0) /* (AB1) UART0_RTSn */ + J721E_IOPAD(0x1e8, PIN_INPUT, 0) /* (AB2) UART0_RXD */ + J721E_IOPAD(0x1ec, PIN_OUTPUT, 0) /* (AB3) UART0_TXD */ + >; + }; + + main_i2c0_pins_default: main-i2c0-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */ + J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */ + >; + }; + + main_i2c1_pins_default: main-i2c1-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */ + J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */ + >; + }; + + main_i2c3_pins_default: main-i2c3-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */ + J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */ + >; + }; + + main_usbss0_pins_default: main-usbss0-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */ + J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */ + >; + }; + + main_usbss1_pins_default: main-usbss1-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */ + >; + }; + + dp0_pins_default: dp0-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */ + >; + }; + + dp_pwr_en_pins_default: dp-pwr-en-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x1c0, PIN_INPUT, 7) /* (AA2) SPI0_CS0.GPIO0_111 */ + >; + }; + + dss_vout0_pins_default: dss-vout0-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x58, PIN_OUTPUT, 10) /* (AE22) PRG1_PRU1_GPO0.VOUT0_DATA0 */ + J721E_IOPAD(0x5c, PIN_OUTPUT, 10) /* (AG23) PRG1_PRU1_GPO1.VOUT0_DATA1 */ + J721E_IOPAD(0x60, PIN_OUTPUT, 10) /* (AF23) PRG1_PRU1_GPO2.VOUT0_DATA2 */ + J721E_IOPAD(0x64, PIN_OUTPUT, 10) /* (AD23) PRG1_PRU1_GPO3.VOUT0_DATA3 */ + J721E_IOPAD(0x68, PIN_OUTPUT, 10) /* (AH24) PRG1_PRU1_GPO4.VOUT0_DATA4 */ + J721E_IOPAD(0x6c, PIN_OUTPUT, 10) /* (AG21) PRG1_PRU1_GPO5.VOUT0_DATA5 */ + J721E_IOPAD(0x70, PIN_OUTPUT, 10) /* (AE23) PRG1_PRU1_GPO6.VOUT0_DATA6 */ + J721E_IOPAD(0x74, PIN_OUTPUT, 10) /* (AC21) PRG1_PRU1_GPO7.VOUT0_DATA7 */ + J721E_IOPAD(0x78, PIN_OUTPUT, 10) /* (Y23) PRG1_PRU1_GPO8.VOUT0_DATA8 */ + J721E_IOPAD(0x7c, PIN_OUTPUT, 10) /* (AF21) PRG1_PRU1_GPO9.VOUT0_DATA9 */ + J721E_IOPAD(0x80, PIN_OUTPUT, 10) /* (AB23) PRG1_PRU1_GPO10.VOUT0_DATA10 */ + J721E_IOPAD(0x84, PIN_OUTPUT, 10) /* (AJ25) PRG1_PRU1_GPO11.VOUT0_DATA11 */ + J721E_IOPAD(0x88, PIN_OUTPUT, 10) /* (AH25) PRG1_PRU1_GPO12.VOUT0_DATA12 */ + J721E_IOPAD(0x8c, PIN_OUTPUT, 10) /* (AG25) PRG1_PRU1_GPO13.VOUT0_DATA13 */ + J721E_IOPAD(0x90, PIN_OUTPUT, 10) /* (AH26) PRG1_PRU1_GPO14.VOUT0_DATA14 */ + J721E_IOPAD(0x94, PIN_OUTPUT, 10) /* (AJ27) PRG1_PRU1_GPO15.VOUT0_DATA15 */ + J721E_IOPAD(0x30, PIN_OUTPUT, 10) /* (AF24) PRG1_PRU0_GPO11.VOUT0_DATA16 */ + J721E_IOPAD(0x34, PIN_OUTPUT, 10) /* (AJ24) PRG1_PRU0_GPO12.VOUT0_DATA17 */ + J721E_IOPAD(0x38, PIN_OUTPUT, 10) /* (AG24) PRG1_PRU0_GPO13.VOUT0_DATA18 */ + J721E_IOPAD(0x3c, PIN_OUTPUT, 10) /* (AD24) PRG1_PRU0_GPO14.VOUT0_DATA19 */ + J721E_IOPAD(0x40, PIN_OUTPUT, 10) /* (AC24) PRG1_PRU0_GPO15.VOUT0_DATA20 */ + J721E_IOPAD(0x44, PIN_OUTPUT, 10) /* (AE24) PRG1_PRU0_GPO16.VOUT0_DATA21 */ + J721E_IOPAD(0x24, PIN_OUTPUT, 10) /* (AJ20) PRG1_PRU0_GPO8.VOUT0_DATA22 */ + J721E_IOPAD(0x28, PIN_OUTPUT, 10) /* (AG20) PRG1_PRU0_GPO9.VOUT0_DATA23 */ + J721E_IOPAD(0x9c, PIN_OUTPUT, 10) /* (AC22) PRG1_PRU1_GPO17.VOUT0_DE */ + J721E_IOPAD(0x98, PIN_OUTPUT, 10) /* (AJ26) PRG1_PRU1_GPO16.VOUT0_HSYNC */ + J721E_IOPAD(0xa4, PIN_OUTPUT, 10) /* (AH22) PRG1_PRU1_GPO19.VOUT0_PCLK */ + J721E_IOPAD(0xa0, PIN_OUTPUT, 10) /* (AJ22) PRG1_PRU1_GPO18.VOUT0_VSYNC */ + >; + }; + + /* Reset for M.2 E Key slot on PCIe0 */ + ekey_reset_pins_default: ekey-reset-pns-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x124, PIN_INPUT, 7) /* (Y24) PRG0_PRU1_GPO9.GPIO0_72 */ + >; + }; +}; + +&wkup_pmx0 { + mcu_cpsw_pins_default: mcu-cpsw-pins-default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x84, PIN_INPUT, 0) /* (B24) MCU_RGMII1_RD0 */ + J721E_WKUP_IOPAD(0x80, PIN_INPUT, 0) /* (A24) MCU_RGMII1_RD1 */ + J721E_WKUP_IOPAD(0x7c, PIN_INPUT, 0) /* (D24) MCU_RGMII1_RD2 */ + J721E_WKUP_IOPAD(0x78, PIN_INPUT, 0) /* (A25) MCU_RGMII1_RD3 */ + J721E_WKUP_IOPAD(0x74, PIN_INPUT, 0) /* (C24) MCU_RGMII1_RXC */ + J721E_WKUP_IOPAD(0x5c, PIN_INPUT, 0) /* (C25) MCU_RGMII1_RX_CTL */ + J721E_WKUP_IOPAD(0x6c, PIN_OUTPUT, 0) /* (B25) MCU_RGMII1_TD0 */ + J721E_WKUP_IOPAD(0x68, PIN_OUTPUT, 0) /* (A26) MCU_RGMII1_TD1 */ + J721E_WKUP_IOPAD(0x64, PIN_OUTPUT, 0) /* (A27) MCU_RGMII1_TD2 */ + J721E_WKUP_IOPAD(0x60, PIN_OUTPUT, 0) /* (A28) MCU_RGMII1_TD3 */ + J721E_WKUP_IOPAD(0x70, PIN_OUTPUT, 0) /* (B26) MCU_RGMII1_TXC */ + J721E_WKUP_IOPAD(0x58, PIN_OUTPUT, 0) /* (B27) MCU_RGMII1_TX_CTL */ + >; + }; + + mcu_mdio_pins_default: mcu-mdio1-pins-default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x8c, PIN_OUTPUT, 0) /* (F23) MCU_MDIO0_MDC */ + J721E_WKUP_IOPAD(0x88, PIN_INPUT, 0) /* (E23) MCU_MDIO0_MDIO */ + >; + }; + + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 0) /* (E20) MCU_OSPI0_CLK */ + J721E_WKUP_IOPAD(0x2c, PIN_OUTPUT, 0) /* (F19) MCU_OSPI0_CSn0 */ + J721E_WKUP_IOPAD(0xc, PIN_INPUT, 0) /* (D20) MCU_OSPI0_D0 */ + J721E_WKUP_IOPAD(0x10, PIN_INPUT, 0) /* (G19) MCU_OSPI0_D1 */ + J721E_WKUP_IOPAD(0x14, PIN_INPUT, 0) /* (G20) MCU_OSPI0_D2 */ + J721E_WKUP_IOPAD(0x18, PIN_INPUT, 0) /* (F20) MCU_OSPI0_D3 */ + J721E_WKUP_IOPAD(0x1c, PIN_INPUT, 0) /* (F21) MCU_OSPI0_D4 */ + J721E_WKUP_IOPAD(0x20, PIN_INPUT, 0) /* (E21) MCU_OSPI0_D5 */ + J721E_WKUP_IOPAD(0x24, PIN_INPUT, 0) /* (B22) MCU_OSPI0_D6 */ + J721E_WKUP_IOPAD(0x28, PIN_INPUT, 0) /* (G21) MCU_OSPI0_D7 */ + J721E_WKUP_IOPAD(0x8, PIN_INPUT, 0) /* (D21) MCU_OSPI0_DQS */ + >; + }; + + vdd_mmc1_en_pins_default: vdd-mmc1-en-pins-default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xd0, PIN_OUTPUT, 7) /* (G27) WKUP_GPIO0_8 */ + >; + }; + + vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-pins-default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xd4, PIN_OUTPUT, 7) /* (G26) WKUP_GPIO0_9 */ + >; + }; + + wkup_i2c0_pins_default: wkup-i2c0-pins-default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */ + J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */ + >; + }; + + /* Reset for M.2 M Key slot on PCIe1 */ + mkey_reset_pins_default: mkey-reset-pns-pins-default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xdc, PIN_INPUT, 7) /* (H27) WKUP_GPIO0_11 */ + >; + }; +}; + +&wkup_uart0 { + /* Wakeup UART is used by System firmware */ + status = "reserved"; +}; + +&main_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; + /* Shared with ATF on this platform */ + power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; +}; + +&main_uart2 { + /* Brought out on RPi header */ + status = "disabled"; +}; + +&main_uart3 { + /* UART not brought out */ + status = "disabled"; +}; + +&main_uart5 { + /* UART not brought out */ + status = "disabled"; +}; + +&main_uart6 { + /* UART not brought out */ + status = "disabled"; +}; + +&main_uart7 { + /* UART not brought out */ + status = "disabled"; +}; + +&main_uart8 { + /* UART not brought out */ + status = "disabled"; +}; + +&main_uart9 { + /* Brought out on M.2 E Key */ + status = "disabled"; +}; + +&main_sdhci0 { + /* Unused */ + status = "disabled"; +}; + +&main_sdhci1 { + /* SD Card */ + vmmc-supply = <&vdd_mmc1>; + vqmmc-supply = <&vdd_sd_dv_alt>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_pins_default>; + ti,driver-strength-ohm = <50>; + disable-wp; +}; + +&main_sdhci2 { + /* Unused */ + status = "disabled"; +}; + +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + spi-max-frequency = <25000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <4>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&ospi1 { + /* Unused */ + status = "disabled"; +}; + +&main_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; + + i2c-mux@71 { + compatible = "nxp,pca9543"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + + /* PCIe1 M.2 M Key I2C */ + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + /* PCIe0 M.2 E Key I2C */ + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; +}; + +&main_i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c1_pins_default>; + /* i2c1 is used for DVI DDC, so we need to use 100kHz */ + clock-frequency = <100000>; +}; + +&main_i2c2 { + /* Unused */ + status = "disabled"; +}; + +&main_i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c3_pins_default>; + clock-frequency = <400000>; + + i2c-mux@70 { + compatible = "nxp,pca9543"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + + /* CSI0 I2C */ + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + /* CSI1 I2C */ + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; +}; + +&main_i2c4 { + /* Unused */ + status = "disabled"; +}; + +&main_i2c5 { + /* Brought out on RPi Header */ + status = "disabled"; +}; + +&main_i2c6 { + /* Unused */ + status = "disabled"; +}; + +&main_gpio2 { + status = "disabled"; +}; + +&main_gpio3 { + status = "disabled"; +}; + +&main_gpio4 { + status = "disabled"; +}; + +&main_gpio5 { + status = "disabled"; +}; + +&main_gpio6 { + status = "disabled"; +}; + +&main_gpio7 { + status = "disabled"; +}; + +&wkup_gpio1 { + status = "disabled"; +}; + +&main_r5fss0_core0{ + firmware-name = "pdk-ipc/ipc_echo_test_mcu2_0_release_strip.xer5f"; +}; + +&usb_serdes_mux { + idle-states = <1>, <1>; /* USB0 to SERDES3, USB1 to SERDES2 */ +}; + +&serdes_ln_ctrl { + idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_IP4_UNUSED>, + <J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>, + <J721E_SERDES2_LANE0_IP1_UNUSED>, <J721E_SERDES2_LANE1_USB3_1>, + <J721E_SERDES3_LANE0_USB3_0_SWAP>, <J721E_SERDES3_LANE1_USB3_0>, + <J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>, + <J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>; +}; + +&serdes_wiz3 { + typec-dir-gpios = <&main_gpio1 3 GPIO_ACTIVE_HIGH>; + typec-dir-debounce-ms = <700>; /* TUSB321, tCCB_DEFAULT 133 ms */ +}; + +&serdes3 { + serdes3_usb_link: phy@0 { + reg = <0>; + cdns,num-lanes = <2>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_USB3>; + resets = <&serdes_wiz3 1>, <&serdes_wiz3 2>; + }; +}; + +&usbss0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_usbss0_pins_default>; + ti,vbus-divider; +}; + +&usb0 { + dr_mode = "otg"; + maximum-speed = "super-speed"; + phys = <&serdes3_usb_link>; + phy-names = "cdns3,usb3-phy"; +}; + +&serdes2 { + serdes2_usb_link: phy@1 { + reg = <1>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_USB3>; + resets = <&serdes_wiz2 2>; + }; +}; + +&usbss1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_usbss1_pins_default>; + ti,vbus-divider; +}; + +&usb1 { + dr_mode = "host"; + maximum-speed = "super-speed"; + phys = <&serdes2_usb_link>; + phy-names = "cdns3,usb3-phy"; +}; + +&tscadc0 { + /* Unused */ + status = "disabled"; +}; + +&tscadc1 { + /* Unused */ + status = "disabled"; +}; + +&mcu_cpsw { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; +}; + +&davinci_mdio { + phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; +}; + +&cpsw_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&phy0>; +}; + +&dss { + pinctrl-names = "default"; + pinctrl-0 = <&dss_vout0_pins_default>; + + assigned-clocks = <&k3_clks 152 1>, /* VP 1 pixel clock */ + <&k3_clks 152 4>, /* VP 2 pixel clock */ + <&k3_clks 152 9>, /* VP 3 pixel clock */ + <&k3_clks 152 13>; /* VP 4 pixel clock */ + assigned-clock-parents = <&k3_clks 152 2>, /* PLL16_HSDIV0 */ + <&k3_clks 152 6>, /* DPI0_EXT_CLKSEL_OUT0 */ + <&k3_clks 152 11>, /* PLL18_HSDIV0 */ + <&k3_clks 152 18>; /* DPI1_EXT_CLKSEL_OUT0 */ +}; + +&mcasp0 { + /* Unused */ + status = "disabled"; +}; + +&mcasp1 { + /* Unused */ + status = "disabled"; +}; + +&mcasp2 { + /* Unused */ + status = "disabled"; +}; + +&mcasp3 { + /* Unused */ + status = "disabled"; +}; + +&mcasp4 { + /* Unused */ + status = "disabled"; +}; + +&mcasp5 { + /* Unused */ + status = "disabled"; +}; + +&mcasp6 { + /* Brought out on RPi header */ + status = "disabled"; +}; + +&mcasp7 { + /* Unused */ + status = "disabled"; +}; + +&mcasp8 { + /* Unused */ + status = "disabled"; +}; + +&mcasp9 { + /* Unused */ + status = "disabled"; +}; + +&mcasp10 { + /* Unused */ + status = "disabled"; +}; + +&mcasp11 { + /* Brought out on M.2 E Key */ + status = "disabled"; +}; + +&serdes0 { + serdes0_pcie_link: phy@0 { + reg = <0>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_PCIE>; + resets = <&serdes_wiz0 1>; + }; +}; + +&serdes1 { + serdes1_pcie_link: phy@0 { + reg = <0>; + cdns,num-lanes = <2>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_PCIE>; + resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>; + }; +}; + +&pcie0_rc { + pinctrl-names = "default"; + pinctrl-0 = <&ekey_reset_pins_default>; + reset-gpios = <&main_gpio0 72 GPIO_ACTIVE_HIGH>; + + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <1>; +}; + +&pcie1_rc { + pinctrl-names = "default"; + pinctrl-0 = <&mkey_reset_pins_default>; + reset-gpios = <&wkup_gpio0 11 GPIO_ACTIVE_HIGH>; + + phys = <&serdes1_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <2>; +}; + +&pcie2_rc { + /* Unused */ + status = "disabled"; +}; + +&pcie0_ep { + status = "disabled"; + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <1>; +}; + +&pcie1_ep { + status = "disabled"; + phys = <&serdes1_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <2>; +}; + +&pcie2_ep { + /* Unused */ + status = "disabled"; +}; + +&pcie3_rc { + /* Unused */ + status = "disabled"; +}; + +&pcie3_ep { + /* Unused */ + status = "disabled"; +}; + +&dss { + status = "disabled"; +}; + +&icssg0_mdio { + status = "disabled"; +}; + +&icssg1_mdio { + status = "disabled"; +}; + +&ufs_wrapper { + status = "disabled"; +}; + +&mailbox0_cluster0 { + interrupts = <436>; + + mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster1 { + interrupts = <432>; + + mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster2 { + interrupts = <428>; + + mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster3 { + interrupts = <424>; + + mbox_c66_0: mbox-c66-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_c66_1: mbox-c66-1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster4 { + interrupts = <420>; + + mbox_c71_0: mbox-c71-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; +}; + +&mailbox0_cluster5 { + status = "disabled"; +}; + +&mailbox0_cluster6 { + status = "disabled"; +}; + +&mailbox0_cluster7 { + status = "disabled"; +}; + +&mailbox0_cluster8 { + status = "disabled"; +}; + +&mailbox0_cluster9 { + status = "disabled"; +}; + +&mailbox0_cluster10 { + status = "disabled"; +}; + +&mailbox0_cluster11 { + status = "disabled"; +}; + +&mcu_r5fss0_core0 { + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; + memory-region = <&mcu_r5fss0_core0_dma_memory_region>, + <&mcu_r5fss0_core0_memory_region>; +}; + +&mcu_r5fss0_core1 { + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>; + memory-region = <&mcu_r5fss0_core1_dma_memory_region>, + <&mcu_r5fss0_core1_memory_region>; +}; + +&main_r5fss0_core0 { + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; + memory-region = <&main_r5fss0_core0_dma_memory_region>, + <&main_r5fss0_core0_memory_region>; +}; + +&main_r5fss0_core1 { + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>; + memory-region = <&main_r5fss0_core1_dma_memory_region>, + <&main_r5fss0_core1_memory_region>; +}; + +&main_r5fss1_core0 { + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>; + memory-region = <&main_r5fss1_core0_dma_memory_region>, + <&main_r5fss1_core0_memory_region>; +}; + +&main_r5fss1_core1 { + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>; + memory-region = <&main_r5fss1_core1_dma_memory_region>, + <&main_r5fss1_core1_memory_region>; +}; + +&c66_0 { + mboxes = <&mailbox0_cluster3 &mbox_c66_0>; + memory-region = <&c66_0_dma_memory_region>, + <&c66_0_memory_region>; +}; + +&c66_1 { + mboxes = <&mailbox0_cluster3 &mbox_c66_1>; + memory-region = <&c66_1_dma_memory_region>, + <&c66_1_memory_region>; +}; + +&c71_0 { + mboxes = <&mailbox0_cluster4 &mbox_c71_0>; + memory-region = <&c71_0_dma_memory_region>, + <&c71_0_memory_region>; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi index f0587fde147e..214359e7288b 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi @@ -31,6 +31,9 @@ serial10 = &main_uart8; serial11 = &main_uart9; ethernet0 = &cpsw_port1; + mmc0 = &main_sdhci0; + mmc1 = &main_sdhci1; + mmc2 = &main_sdhci2; }; chosen { }; diff --git a/arch/arm64/boot/dts/toshiba/Makefile b/arch/arm64/boot/dts/toshiba/Makefile index 8cd460d5b68e..7ccb4664bb37 100644 --- a/arch/arm64/boot/dts/toshiba/Makefile +++ b/arch/arm64/boot/dts/toshiba/Makefile @@ -1,2 +1,3 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_VISCONTI) += tmpv7708-rm-mbrc.dtb +dtb-$(CONFIG_ARCH_VISCONTI) += tmpv7708-visrobo-vrb.dtb diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts index 29a4d9fc1e47..9375b0faeea2 100644 --- a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts +++ b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts @@ -76,3 +76,9 @@ &pwm { status = "okay"; }; + +&pcie { + status = "okay"; + clocks = <&extclk100mhz>, <&clk600mhz>, <&clk25mhz>; + clock-names = "ref", "core", "aux"; +}; diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrb.dts b/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrb.dts new file mode 100644 index 000000000000..d0817463706e --- /dev/null +++ b/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrb.dts @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree File for TMPV7708 VisROBO VRB board + * + * (C) Copyright 2020, 2021, Toshiba Corporation. + * (C) Copyright 2020, Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> + */ + +/dts-v1/; + +#include "tmpv7708-visrobo-vrc.dtsi" + +/ { + model = "Toshiba TMPV7708 VisROBO (VRB) board"; + compatible = "toshiba,tmpv7708-visrobo-vrb", "toshiba,tmpv7708"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + /* 768MB memory */ + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x30000000>; + }; +}; + +&uart0 { + status = "okay"; + clocks = <&uart_clk>; + clock-names = "apb_pclk"; +}; + +&uart1 { + status = "okay"; + clocks = <&uart_clk>; + clock-names = "apb_pclk"; +}; + +&piether { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + clocks = <&clk300mhz>, <&clk125mhz>; + clock-names = "stmmaceth", "phy_ref_clk"; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@1 { + device_type = "ethernet-phy"; + reg = <0x1>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrc.dtsi b/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrc.dtsi new file mode 100644 index 000000000000..f0a93db6dde6 --- /dev/null +++ b/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrc.dtsi @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree File for TMPV7708 VisROBO VRC SoM + * + * (C) Copyright 2020, 2021, Toshiba Corporation. + * (C) Copyright 2020, Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> + */ + +/dts-v1/; + +#include "tmpv7708.dtsi" +#include <dt-bindings/gpio/gpio.h> + +&wdt { + status = "okay"; + clocks = <&wdt_clk>; +}; + +&gpio { + status = "okay"; +}; + +&spi0_pins { + groups = "spi0_grp", "spi0_cs0_grp"; +}; + +&spi0 { + status = "okay"; + clocks = <&clk300mhz>, <&clk150mhz>; + clock-names = "sspclk", "apb_pclk"; + + mmc-slot@0 { + compatible = "mmc-spi-slot"; + reg = <0>; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + voltage-ranges = <3200 3400>; + spi-max-frequency = <12000000>; + }; +}; + +&i2c0 { + status = "okay"; + clocks = <&clk150mhz>; +}; diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi index 4b4231ff43cf..01d7ee61ad25 100644 --- a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi +++ b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi @@ -134,6 +134,13 @@ #clock-cells = <0>; }; + clk25mhz: clk25mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + clock-output-names = "clk25mhz"; + }; + clk125mhz: clk125mhz { compatible = "fixed-clock"; clock-frequency = <125000000>; @@ -141,6 +148,13 @@ clock-output-names = "clk125mhz"; }; + clk150mhz: clk150mhz { + compatible = "fixed-clock"; + clock-frequency = <150000000>; + #clock-cells = <0>; + clock-output-names = "clk150mhz"; + }; + clk300mhz: clk300mhz { compatible = "fixed-clock"; clock-frequency = <300000000>; @@ -148,6 +162,20 @@ clock-output-names = "clk300mhz"; }; + clk600mhz: clk600mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <600000000>; + clock-output-names = "clk600mhz"; + }; + + extclk100mhz: extclk100mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "extclk100mhz"; + }; + wdt_clk: wdt-clk { compatible = "fixed-clock"; clock-frequency = <150000000>; @@ -441,6 +469,37 @@ #pwm-cells = <2>; status = "disabled"; }; + + pcie: pcie@28400000 { + compatible = "toshiba,visconti-pcie"; + reg = <0x0 0x28400000 0x0 0x00400000>, + <0x0 0x70000000 0x0 0x10000000>, + <0x0 0x28050000 0x0 0x00010000>, + <0x0 0x24200000 0x0 0x00002000>, + <0x0 0x24162000 0x0 0x00001000>; + reg-names = "dbi", "config", "ulreg", "smu", "mpu"; + device_type = "pci"; + bus-range = <0x00 0xff>; + num-lanes = <2>; + num-viewport = <8>; + + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x81000000 0 0x40000000 0 0x40000000 0 0x00010000 + 0x82000000 0 0x50000000 0 0x50000000 0 0x20000000>; + interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi", "intr"; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = + <0 0 0 1 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH + 0 0 0 2 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH + 0 0 0 3 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH + 0 0 0 4 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + max-link-speed = <2>; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile index 11fb4fd3ebd4..4e159540d031 100644 --- a/arch/arm64/boot/dts/xilinx/Makefile +++ b/arch/arm64/boot/dts/xilinx/Makefile @@ -12,7 +12,21 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu100-revC.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revB.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-rev1.0.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-rev1.1.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu104-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu104-revC.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu106-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu111-revA.dtb + +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA.dtb + +sm-k26-revA-sck-kv-g-revA-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kv-g-revA.dtbo +sm-k26-revA-sck-kv-g-revB-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kv-g-revB.dtbo +smk-k26-revA-sm-k26-revA-sck-kv-g-revA-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-g-revA.dtbo +smk-k26-revA-sm-k26-revA-sck-kv-g-revB-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-g-revB.dtbo + +dtb-$(CONFIG_ARCH_ZYNQMP) += sm-k26-revA-sck-kv-g-revA.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += sm-k26-revA-sck-kv-g-revB.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += smk-k26-revA-sm-k26-revA-sck-kv-g-revA.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += smk-k26-revA-sm-k26-revA-sck-kv-g-revB.dtb diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi index cf5295224750..1e0b1bca7c94 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi @@ -2,7 +2,7 @@ /* * Clock specification for Xilinx ZynqMP * - * (C) Copyright 2017 - 2019, Xilinx, Inc. + * (C) Copyright 2017 - 2021, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -40,6 +40,17 @@ }; }; +&zynqmp_firmware { + zynqmp_clk: clock-controller { + #clock-cells = <1>; + compatible = "xlnx,zynqmp-clk"; + clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, + <&aux_ref_clk>, <>_crx_ref_clk>; + clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk", + "aux_ref_clk", "gt_crx_ref_clk"; + }; +}; + &can0 { clocks = <&zynqmp_clk CAN0_REF>, <&zynqmp_clk LPD_LSBUS>; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts new file mode 100644 index 000000000000..b610e65e0cdf --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts @@ -0,0 +1,315 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for KV260 revA Carrier Card + * + * (C) Copyright 2020 - 2021, Xilinx, Inc. + * + * SD level shifter: + * "A" – A01 board un-modified (NXP) + * "Y" – A01 board modified with legacy interposer (Nexperia) + * "Z" – A01 board modified with Diode interposer + * + * Michal Simek <michal.simek@xilinx.com> + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/net/ti-dp83867.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/pinctrl/pinctrl-zynqmp.h> + +/dts-v1/; +/plugin/; + +&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; + + /* u14 - 0x40 - ina260 */ + /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */ +}; + +&amba { + si5332_0: si5332_0 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + si5332_1: si5332_1 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + si5332_2: si5332_2 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + + si5332_3: si5332_3 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + si5332_4: si5332_4 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + si5332_5: si5332_5 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; +}; + +/* DP/USB 3.0 and SATA */ +&psgtr { + status = "okay"; + /* pcie, usb3, sata */ + clocks = <&si5332_5>, <&si5332_4>, <&si5332_0>; + clock-names = "ref0", "ref1", "ref2"; +}; + +&sata { + status = "okay"; + /* SATA OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + phy-names = "sata-phy"; + phys = <&psgtr 3 PHY_TYPE_SATA 1 2>; +}; + +&zynqmp_dpsub { + status = "disabled"; + phy-names = "dp-phy0", "dp-phy1"; + phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>; +}; + +&zynqmp_dpdma { + status = "okay"; +}; + +&usb0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; + /* missing usb5744 - u43 */ +}; + +&dwc3_0 { + status = "okay"; + dr_mode = "host"; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; +}; + +&sdhci1 { /* on CC with tuned parameters */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci1_default>; + /* + * SD 3.0 requires level shifter and this property + * should be removed if the board has level shifter and + * need to work in UHS mode + */ + no-1-8-v; + disable-wp; + xlnx,mio-bank = <1>; +}; + +&gem3 { /* required by spec */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem3_default>; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>; + reset-delay-us = <2>; + + phy0: ethernet-phy@1 { + #phy-cells = <1>; + reg = <1>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,dp83867-rxctrl-strap-quirk; + }; + }; +}; + +&pinctrl0 { /* required by spec */ + status = "okay"; + + pinctrl_uart1_default: uart1-default { + conf { + groups = "uart1_9_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO37"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO36"; + bias-disable; + }; + + mux { + groups = "uart1_9_grp"; + function = "uart1"; + }; + }; + + pinctrl_i2c1_default: i2c1-default { + conf { + groups = "i2c1_6_grp"; + bias-pull-up; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + mux { + groups = "i2c1_6_grp"; + function = "i2c1"; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + conf { + groups = "gpio0_24_grp", "gpio0_25_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + mux { + groups = "gpio0_24_grp", "gpio0_25_grp"; + function = "gpio0"; + }; + }; + + pinctrl_gem3_default: gem3-default { + conf { + groups = "ethernet3_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO70", "MIO72", "MIO74"; + bias-high-impedance; + low-power-disable; + }; + + conf-bootstrap { + pins = "MIO71", "MIO73", "MIO75"; + bias-disable; + low-power-disable; + }; + + conf-tx { + pins = "MIO64", "MIO65", "MIO66", + "MIO67", "MIO68", "MIO69"; + bias-disable; + low-power-enable; + }; + + conf-mdio { + groups = "mdio3_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + bias-disable; + }; + + mux-mdio { + function = "mdio3"; + groups = "mdio3_0_grp"; + }; + + mux { + function = "ethernet3"; + groups = "ethernet3_0_grp"; + }; + }; + + pinctrl_usb0_default: usb0-default { + conf { + groups = "usb0_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + }; + + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + }; + + pinctrl_sdhci1_default: sdhci1-default { + conf { + groups = "sdio1_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + bias-disable; + }; + + conf-cd { + groups = "sdio1_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + mux-cd { + groups = "sdio1_cd_0_grp"; + function = "sdio1_cd"; + }; + + mux { + groups = "sdio1_0_grp"; + function = "sdio1"; + }; + }; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dts new file mode 100644 index 000000000000..a52dafbfd59e --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dts @@ -0,0 +1,298 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for KV260 revA Carrier Card + * + * (C) Copyright 2020 - 2021, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/net/ti-dp83867.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/pinctrl/pinctrl-zynqmp.h> + +/dts-v1/; +/plugin/; + +&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; + + /* u14 - 0x40 - ina260 */ + /* u43 - 0x2d - usb5744 */ + /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */ +}; + +&amba { + si5332_0: si5332_0 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + si5332_1: si5332_1 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + si5332_2: si5332_2 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + + si5332_3: si5332_3 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + si5332_4: si5332_4 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + si5332_5: si5332_5 { /* u17 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; +}; + +/* DP/USB 3.0 */ +&psgtr { + status = "okay"; + /* pcie, usb3, sata */ + clocks = <&si5332_5>, <&si5332_4>, <&si5332_0>; + clock-names = "ref0", "ref1", "ref2"; +}; + +&zynqmp_dpsub { + status = "disabled"; + phy-names = "dp-phy0", "dp-phy1"; + phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>; +}; + +&zynqmp_dpdma { + status = "okay"; +}; + +&usb0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; +}; + +&dwc3_0 { + status = "okay"; + dr_mode = "host"; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; +}; + +&sdhci1 { /* on CC with tuned parameters */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci1_default>; + /* + * SD 3.0 requires level shifter and this property + * should be removed if the board has level shifter and + * need to work in UHS mode + */ + no-1-8-v; + disable-wp; + xlnx,mio-bank = <1>; + clk-phase-sd-hs = <126>, <60>; + clk-phase-uhs-sdr25 = <120>, <60>; + clk-phase-uhs-ddr50 = <126>, <48>; +}; + +&gem3 { /* required by spec */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem3_default>; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>; + reset-delay-us = <2>; + + phy0: ethernet-phy@1 { + #phy-cells = <1>; + reg = <1>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,dp83867-rxctrl-strap-quirk; + }; + }; +}; + +&pinctrl0 { /* required by spec */ + status = "okay"; + + pinctrl_uart1_default: uart1-default { + conf { + groups = "uart1_9_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO37"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO36"; + bias-disable; + }; + + mux { + groups = "uart1_9_grp"; + function = "uart1"; + }; + }; + + pinctrl_i2c1_default: i2c1-default { + conf { + groups = "i2c1_6_grp"; + bias-pull-up; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + mux { + groups = "i2c1_6_grp"; + function = "i2c1"; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + conf { + groups = "gpio0_24_grp", "gpio0_25_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + mux { + groups = "gpio0_24_grp", "gpio0_25_grp"; + function = "gpio0"; + }; + }; + + pinctrl_gem3_default: gem3-default { + conf { + groups = "ethernet3_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO70", "MIO72", "MIO74"; + bias-high-impedance; + low-power-disable; + }; + + conf-bootstrap { + pins = "MIO71", "MIO73", "MIO75"; + bias-disable; + low-power-disable; + }; + + conf-tx { + pins = "MIO64", "MIO65", "MIO66", + "MIO67", "MIO68", "MIO69"; + bias-disable; + low-power-enable; + }; + + conf-mdio { + groups = "mdio3_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + bias-disable; + }; + + mux-mdio { + function = "mdio3"; + groups = "mdio3_0_grp"; + }; + + mux { + function = "ethernet3"; + groups = "ethernet3_0_grp"; + }; + }; + + pinctrl_usb0_default: usb0-default { + conf { + groups = "usb0_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + }; + + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + }; + + pinctrl_sdhci1_default: sdhci1-default { + conf { + groups = "sdio1_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + bias-disable; + }; + + conf-cd { + groups = "sdio1_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + mux-cd { + groups = "sdio1_cd_0_grp"; + function = "sdio1_cd"; + }; + + mux { + groups = "sdio1_0_grp"; + function = "sdio1"; + }; + }; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts new file mode 100644 index 000000000000..550b389153e6 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts @@ -0,0 +1,289 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Xilinx ZynqMP SM-K26 rev1/B/A + * + * (C) Copyright 2020 - 2021, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk-ccf.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/phy/phy.h> + +/ { + model = "ZynqMP SM-K26 Rev1/B/A"; + compatible = "xlnx,zynqmp-sm-k26-rev1", "xlnx,zynqmp-sm-k26-revB", + "xlnx,zynqmp-sm-k26-revA", "xlnx,zynqmp-sm-k26", + "xlnx,zynqmp"; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + nvmem0 = &eeprom; + nvmem1 = &eeprom_cc; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &dcc; + spi0 = &qspi; + spi1 = &spi0; + spi2 = &spi1; + usb0 = &usb0; + usb1 = &usb1; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial1:115200n8"; + }; + + memory@0 { + device_type = "memory"; /* 4GB */ + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + fwuen { + label = "fwuen"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + ds35-led { + label = "heartbeat"; + gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + ds36-led { + label = "vbus_det"; + gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; +}; + +&uart1 { /* MIO36/MIO37 */ + status = "okay"; +}; + +&qspi { /* MIO 0-5 - U143 */ + status = "okay"; + flash@0 { /* MT25QU512A */ + compatible = "mt25qu512a", "jedec,spi-nor"; /* 64MB */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <40000000>; /* 40MHz */ + partition@0 { + label = "Image Selector"; + reg = <0x0 0x80000>; /* 512KB */ + read-only; + lock; + }; + partition@80000 { + label = "Image Selector Golden"; + reg = <0x80000 0x80000>; /* 512KB */ + read-only; + lock; + }; + partition@100000 { + label = "Persistent Register"; + reg = <0x100000 0x20000>; /* 128KB */ + }; + partition@120000 { + label = "Persistent Register Backup"; + reg = <0x120000 0x20000>; /* 128KB */ + }; + partition@140000 { + label = "Open_1"; + reg = <0x140000 0xC0000>; /* 768KB */ + }; + partition@200000 { + label = "Image A (FSBL, PMU, ATF, U-Boot)"; + reg = <0x200000 0xD00000>; /* 13MB */ + }; + partition@f00000 { + label = "ImgSel Image A Catch"; + reg = <0xF00000 0x80000>; /* 512KB */ + read-only; + lock; + }; + partition@f80000 { + label = "Image B (FSBL, PMU, ATF, U-Boot)"; + reg = <0xF80000 0xD00000>; /* 13MB */ + }; + partition@1c80000 { + label = "ImgSel Image B Catch"; + reg = <0x1C80000 0x80000>; /* 512KB */ + read-only; + lock; + }; + partition@1d00000 { + label = "Open_2"; + reg = <0x1D00000 0x100000>; /* 1MB */ + }; + partition@1e00000 { + label = "Recovery Image"; + reg = <0x1E00000 0x200000>; /* 2MB */ + read-only; + lock; + }; + partition@2000000 { + label = "Recovery Image Backup"; + reg = <0x2000000 0x200000>; /* 2MB */ + read-only; + lock; + }; + partition@2200000 { + label = "U-Boot storage variables"; + reg = <0x2200000 0x20000>; /* 128KB */ + }; + partition@2220000 { + label = "U-Boot storage variables backup"; + reg = <0x2220000 0x20000>; /* 128KB */ + }; + partition@2240000 { + label = "SHA256"; + reg = <0x2240000 0x10000>; /* 256B but 64KB sector */ + read-only; + lock; + }; + partition@2250000 { + label = "User"; + reg = <0x2250000 0x1db0000>; /* 29.5 MB */ + }; + }; +}; + +&sdhci0 { /* MIO13-23 - 16GB emmc MTFC16GAPALBH-IT - U133A */ + status = "okay"; + non-removable; + disable-wp; + bus-width = <8>; + xlnx,mio-bank = <0>; +}; + +&spi1 { /* MIO6, 9-11 */ + status = "okay"; + label = "TPM"; + num-cs = <1>; + tpm@0 { /* slm9670 - U144 */ + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <18500000>; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; + + eeprom: eeprom@50 { /* u46 - also at address 0x58 */ + compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */ + reg = <0x50>; + /* WP pin EE_WP_EN connected to slg7x644092@68 */ + }; + + eeprom_cc: eeprom@51 { /* required by spec - also at address 0x59 */ + compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */ + reg = <0x51>; + }; + + /* da9062@30 - u170 - also at address 0x31 */ + /* da9131@33 - u167 */ + da9131: pmic@33 { + compatible = "dlg,da9131"; + reg = <0x33>; + regulators { + da9131_buck1: buck1 { + regulator-name = "da9131_buck1"; + regulator-boot-on; + regulator-always-on; + }; + da9131_buck2: buck2 { + regulator-name = "da9131_buck2"; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + /* da9130@32 - u166 */ + da9130: pmic@32 { + compatible = "dlg,da9130"; + reg = <0x32>; + regulators { + da9130_buck1: buck1 { + regulator-name = "da9130_buck1"; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + /* slg7x644091@70 - u168 NOT accessible due to address conflict with stdp4320 */ + /* + * stdp4320 - u27 FW has below two issues to be fixed in next board revision. + * Device acknowledging to addresses 0x5C, 0x5D, 0x70, 0x72, 0x76. + * Address conflict with slg7x644091@70 making both the devices NOT accessible. + * With the FW fix, stdp4320 should respond to address 0x73 only. + */ + /* slg7x644092@68 - u169 */ + /* Also connected via JA1C as C23/C24 */ +}; + +&gpio { + status = "okay"; + gpio-line-names = "QSPI_CLK", "QSPI_DQ1", "QSPI_DQ2", "QSPI_DQ3", "QSPI_DQ0", /* 0 - 4 */ + "QSPI_CS_B", "SPI_CLK", "LED1", "LED2", "SPI_CS_B", /* 5 - 9 */ + "SPI_MISO", "SPI_MOSI", "FWUEN", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */ + "EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */ + "EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST", "I2C1_SCL", /* 20 - 24 */ + "I2C1_SDA", "", "", "", "", /* 25 - 29 */ + "", "", "", "", "", /* 30 - 34 */ + "", "", "", "", "", /* 35 - 39 */ + "", "", "", "", "", /* 40 - 44 */ + "", "", "", "", "", /* 45 - 49 */ + "", "", "", "", "", /* 50 - 54 */ + "", "", "", "", "", /* 55 - 59 */ + "", "", "", "", "", /* 60 - 64 */ + "", "", "", "", "", /* 65 - 69 */ + "", "", "", "", "", /* 70 - 74 */ + "", "", "", /* 75 - 77, MIO end and EMIO start */ + "", "", /* 78 - 79 */ + "", "", "", "", "", /* 80 - 84 */ + "", "", "", "", "", /* 85 - 89 */ + "", "", "", "", "", /* 90 - 94 */ + "", "", "", "", "", /* 95 - 99 */ + "", "", "", "", "", /* 100 - 104 */ + "", "", "", "", "", /* 105 - 109 */ + "", "", "", "", "", /* 110 - 114 */ + "", "", "", "", "", /* 115 - 119 */ + "", "", "", "", "", /* 120 - 124 */ + "", "", "", "", "", /* 125 - 129 */ + "", "", "", "", "", /* 130 - 134 */ + "", "", "", "", "", /* 135 - 139 */ + "", "", "", "", "", /* 140 - 144 */ + "", "", "", "", "", /* 145 - 149 */ + "", "", "", "", "", /* 150 - 154 */ + "", "", "", "", "", /* 155 - 159 */ + "", "", "", "", "", /* 160 - 164 */ + "", "", "", "", "", /* 165 - 169 */ + "", "", "", ""; /* 170 - 174 */ +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts new file mode 100644 index 000000000000..c70966c1f344 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Xilinx ZynqMP SMK-K26 rev1/B/A + * + * (C) Copyright 2020 - 2021, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +#include "zynqmp-sm-k26-revA.dts" + +/ { + model = "ZynqMP SMK-K26 Rev1/B/A"; + compatible = "xlnx,zynqmp-smk-k26-rev1", "xlnx,zynqmp-smk-k26-revB", + "xlnx,zynqmp-smk-k26-revA", "xlnx,zynqmp-smk-k26", + "xlnx,zynqmp"; +}; + +&sdhci0 { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts index 2e05fa416955..f1598527e5ec 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZC1232 * - * (C) Copyright 2017 - 2019, Xilinx, Inc. + * (C) Copyright 2017 - 2021, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -19,6 +19,7 @@ aliases { serial0 = &uart0; serial1 = &dcc; + spi0 = &qspi; }; chosen { @@ -36,6 +37,19 @@ status = "okay"; }; +&qspi { + status = "okay"; + flash@0 { + compatible = "m25p80", "jedec,spi-nor"; /* 32MB */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; /* Based on DC1 spec */ + }; +}; + &sata { status = "okay"; /* SATA OOB timing settings */ diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts index 3d0aaa02f184..04efa1683eaa 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZC1254 * - * (C) Copyright 2015 - 2019, Xilinx, Inc. + * (C) Copyright 2015 - 2021, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> * Siva Durga Prasad Paladugu <sivadur@xilinx.com> @@ -20,6 +20,7 @@ aliases { serial0 = &uart0; serial1 = &dcc; + spi0 = &qspi; }; chosen { @@ -37,6 +38,19 @@ status = "okay"; }; +&qspi { + status = "okay"; + flash@0 { + compatible = "m25p80", "jedec,spi-nor"; /* 32MB */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ + spi-max-frequency = <108000000>; /* Based on DC1 spec */ + }; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts index 66a90483b004..e971ba8c1418 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZC1275 * - * (C) Copyright 2017 - 2019, Xilinx, Inc. + * (C) Copyright 2017 - 2021, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> * Siva Durga Prasad Paladugu <sivadur@xilinx.com> @@ -20,6 +20,7 @@ aliases { serial0 = &uart0; serial1 = &dcc; + spi0 = &qspi; }; chosen { @@ -37,6 +38,21 @@ status = "okay"; }; +&gpio { + status = "okay"; +}; + +&qspi { + status = "okay"; + flash@0 { + compatible = "m25p80", "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; + }; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts index 69f6e4610739..b05be2552826 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP zc1751-xm015-dc1 * - * (C) Copyright 2015 - 2019, Xilinx, Inc. + * (C) Copyright 2015 - 2021, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -11,7 +11,9 @@ #include "zynqmp.dtsi" #include "zynqmp-clk-ccf.dtsi" +#include <dt-bindings/phy/phy.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/pinctrl-zynqmp.h> / { model = "ZynqMP zc1751-xm015-dc1 RevA"; @@ -24,6 +26,8 @@ mmc1 = &sdhci1; rtc0 = &rtc; serial0 = &uart0; + spi0 = &qspi; + usb0 = &usb0; }; chosen { @@ -35,6 +39,24 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; }; + + clock_si5338_0: clk27 { /* u55 SI5338-GM */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; + + clock_si5338_2: clk26 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + clock_si5338_3: clk150 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <150000000>; + }; }; &fpd_dma_chan1 { @@ -73,6 +95,8 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem3_default>; phy0: ethernet-phy@0 { reg = <0>; }; @@ -80,12 +104,19 @@ &gpio { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_default>; }; &i2c1 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 36 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; eeprom: eeprom@55 { compatible = "atmel,24c64"; /* 24AA64 */ @@ -93,6 +124,236 @@ }; }; +&pinctrl0 { + status = "okay"; + pinctrl_i2c1_default: i2c1-default { + mux { + groups = "i2c1_9_grp"; + function = "i2c1"; + }; + + conf { + groups = "i2c1_9_grp"; + bias-pull-up; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + mux { + groups = "gpio0_36_grp", "gpio0_37_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_36_grp", "gpio0_37_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_uart0_default: uart0-default { + mux { + groups = "uart0_8_grp"; + function = "uart0"; + }; + + conf { + groups = "uart0_8_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO34"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO35"; + bias-disable; + }; + }; + + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + }; + }; + + pinctrl_gem3_default: gem3-default { + mux { + function = "ethernet3"; + groups = "ethernet3_0_grp"; + }; + + conf { + groups = "ethernet3_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74", + "MIO75"; + bias-high-impedance; + low-power-disable; + }; + + conf-tx { + pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68", + "MIO69"; + bias-disable; + low-power-enable; + }; + + mux-mdio { + function = "mdio3"; + groups = "mdio3_0_grp"; + }; + + conf-mdio { + groups = "mdio3_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + bias-disable; + }; + }; + + pinctrl_sdhci0_default: sdhci0-default { + mux { + groups = "sdio0_0_grp"; + function = "sdio0"; + }; + + conf { + groups = "sdio0_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + bias-disable; + }; + + mux-cd { + groups = "sdio0_cd_0_grp"; + function = "sdio0_cd"; + }; + + conf-cd { + groups = "sdio0_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + mux-wp { + groups = "sdio0_wp_0_grp"; + function = "sdio0_wp"; + }; + + conf-wp { + groups = "sdio0_wp_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_sdhci1_default: sdhci1-default { + mux { + groups = "sdio1_0_grp"; + function = "sdio1"; + }; + + conf { + groups = "sdio1_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + bias-disable; + }; + + mux-cd { + groups = "sdio1_cd_0_grp"; + function = "sdio1_cd"; + }; + + conf-cd { + groups = "sdio1_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + mux-wp { + groups = "sdio1_wp_0_grp"; + function = "sdio1_wp"; + }; + + conf-wp { + groups = "sdio1_wp_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_gpio_default: gpio-default { + mux { + function = "gpio0"; + groups = "gpio0_38_grp"; + }; + + conf { + groups = "gpio0_38_grp"; + bias-disable; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; +}; + +&psgtr { + status = "okay"; + /* dp, usb3, sata */ + clocks = <&clock_si5338_0>, <&clock_si5338_2>, <&clock_si5338_3>; + clock-names = "ref1", "ref2", "ref3"; +}; + +&qspi { + status = "okay"; + flash@0 { + compatible = "m25p80", "jedec,spi-nor"; /* Micron MT25QU512ABB8ESF */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; /* Based on DC1 spec */ + }; +}; + &rtc { status = "okay"; }; @@ -108,25 +369,60 @@ ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>; ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + phy-names = "sata-phy"; + phys = <&psgtr 3 PHY_TYPE_SATA 1 3>; }; /* eMMC */ &sdhci0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci0_default>; bus-width = <8>; + xlnx,mio-bank = <0>; }; /* SD1 with level shifter */ &sdhci1 { status = "okay"; + /* + * This property should be removed for supporting UHS mode + */ + no-1-8-v; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci1_default>; + xlnx,mio-bank = <1>; }; &uart0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0_default>; }; /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; +}; + +&dwc3_0 { + status = "okay"; dr_mode = "host"; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; +}; + +&zynqmp_dpdma { + status = "okay"; +}; + +&zynqmp_dpsub { + status = "okay"; + phy-names = "dp-phy0", "dp-phy1"; + phys = <&psgtr 1 PHY_TYPE_DP 0 0>, + <&psgtr 0 PHY_TYPE_DP 1 1>; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts index 4a86efa32d68..938b76bd0527 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP zc1751-xm016-dc2 * - * (C) Copyright 2015 - 2019, Xilinx, Inc. + * (C) Copyright 2015 - 2021, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -12,14 +12,13 @@ #include "zynqmp.dtsi" #include "zynqmp-clk-ccf.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/pinctrl-zynqmp.h> / { model = "ZynqMP zc1751-xm016-dc2 RevA"; compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp"; aliases { - can0 = &can0; - can1 = &can1; ethernet0 = &gem2; i2c0 = &i2c0; rtc0 = &rtc; @@ -27,6 +26,7 @@ serial1 = &uart1; spi0 = &spi0; spi1 = &spi1; + usb0 = &usb1; }; chosen { @@ -42,10 +42,14 @@ &can0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0_default>; }; &can1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_default>; }; &fpd_dma_chan1 { @@ -84,6 +88,8 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem2_default>; phy0: ethernet-phy@5 { reg = <5>; ti,rx-internal-delay = <0x8>; @@ -100,6 +106,11 @@ &i2c0 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c0_default>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + scl-gpios = <&gpio 6 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; tca6416_u26: gpio@20 { compatible = "ti,tca6416"; @@ -115,6 +126,311 @@ }; }; +&nand0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand0_default>; + arasan,has-mdma; + + nand@0 { + reg = <0x0>; + #address-cells = <0x2>; + #size-cells = <0x1>; + nand-ecc-mode = "soft"; + nand-ecc-algo = "bch"; + nand-rb = <0>; + label = "main-storage-0"; + }; + nand@1 { + reg = <0x1>; + #address-cells = <0x2>; + #size-cells = <0x1>; + nand-ecc-mode = "soft"; + nand-ecc-algo = "bch"; + nand-rb = <0>; + label = "main-storage-1"; + }; +}; + +&pinctrl0 { + status = "okay"; + pinctrl_can0_default: can0-default { + mux { + function = "can0"; + groups = "can0_9_grp"; + }; + + conf { + groups = "can0_9_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO38"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO39"; + bias-disable; + }; + }; + + pinctrl_can1_default: can1-default { + mux { + function = "can1"; + groups = "can1_8_grp"; + }; + + conf { + groups = "can1_8_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO33"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO32"; + bias-disable; + }; + }; + + pinctrl_i2c0_default: i2c0-default { + mux { + groups = "i2c0_1_grp"; + function = "i2c0"; + }; + + conf { + groups = "i2c0_1_grp"; + bias-pull-up; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_i2c0_gpio: i2c0-gpio { + mux { + groups = "gpio0_6_grp", "gpio0_7_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_6_grp", "gpio0_7_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_uart0_default: uart0-default { + mux { + groups = "uart0_10_grp"; + function = "uart0"; + }; + + conf { + groups = "uart0_10_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO42"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO43"; + bias-disable; + }; + }; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_10_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_10_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO41"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO40"; + bias-disable; + }; + }; + + pinctrl_usb1_default: usb1-default { + mux { + groups = "usb1_0_grp"; + function = "usb1"; + }; + + conf { + groups = "usb1_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO64", "MIO65", "MIO67"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71", + "MIO72", "MIO73", "MIO74", "MIO75"; + bias-disable; + }; + }; + + pinctrl_gem2_default: gem2-default { + mux { + function = "ethernet2"; + groups = "ethernet2_0_grp"; + }; + + conf { + groups = "ethernet2_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO58", "MIO59", "MIO60", "MIO61", "MIO62", + "MIO63"; + bias-high-impedance; + low-power-disable; + }; + + conf-tx { + pins = "MIO52", "MIO53", "MIO54", "MIO55", "MIO56", + "MIO57"; + bias-disable; + low-power-enable; + }; + + mux-mdio { + function = "mdio2"; + groups = "mdio2_0_grp"; + }; + + conf-mdio { + groups = "mdio2_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + bias-disable; + }; + }; + + pinctrl_nand0_default: nand0-default { + mux { + groups = "nand0_0_grp"; + function = "nand0"; + }; + + conf { + groups = "nand0_0_grp"; + bias-pull-up; + }; + + mux-ce { + groups = "nand0_ce_0_grp"; + function = "nand0_ce"; + }; + + conf-ce { + groups = "nand0_ce_0_grp"; + bias-pull-up; + }; + + mux-rb { + groups = "nand0_rb_0_grp"; + function = "nand0_rb"; + }; + + conf-rb { + groups = "nand0_rb_0_grp"; + bias-pull-up; + }; + + mux-dqs { + groups = "nand0_dqs_0_grp"; + function = "nand0_dqs"; + }; + + conf-dqs { + groups = "nand0_dqs_0_grp"; + bias-pull-up; + }; + }; + + pinctrl_spi0_default: spi0-default { + mux { + groups = "spi0_0_grp"; + function = "spi0"; + }; + + conf { + groups = "spi0_0_grp"; + bias-disable; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + mux-cs { + groups = "spi0_ss_0_grp", "spi0_ss_1_grp", + "spi0_ss_2_grp"; + function = "spi0_ss"; + }; + + conf-cs { + groups = "spi0_ss_0_grp", "spi0_ss_1_grp", + "spi0_ss_2_grp"; + bias-disable; + }; + }; + + pinctrl_spi1_default: spi1-default { + mux { + groups = "spi1_3_grp"; + function = "spi1"; + }; + + conf { + groups = "spi1_3_grp"; + bias-disable; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + mux-cs { + groups = "spi1_ss_9_grp", "spi1_ss_10_grp", + "spi1_ss_11_grp"; + function = "spi1_ss"; + }; + + conf-cs { + groups = "spi1_ss_9_grp", "spi1_ss_10_grp", + "spi1_ss_11_grp"; + bias-disable; + }; + }; +}; + &rtc { status = "okay"; }; @@ -122,6 +438,8 @@ &spi0 { status = "okay"; num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0_default>; spi0_flash0: flash@0 { #address-cells = <1>; @@ -131,7 +449,7 @@ reg = <0>; partition@0 { - label = "data"; + label = "spi0-data"; reg = <0x0 0x100000>; }; }; @@ -140,6 +458,8 @@ &spi1 { status = "okay"; num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; spi1_flash0: flash@0 { #address-cells = <1>; @@ -149,7 +469,7 @@ reg = <0>; partition@0 { - label = "data"; + label = "spi1-data"; reg = <0x0 0x84000>; }; }; @@ -158,13 +478,25 @@ /* ULPI SMSC USB3320 */ &usb1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_default>; +}; + +&dwc3_1 { + status = "okay"; dr_mode = "host"; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; }; &uart0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0_default>; }; &uart1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts index 4ea6ef5a7f2b..381cc682cef9 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP zc1751-xm017-dc3 * - * (C) Copyright 2016 - 2019, Xilinx, Inc. + * (C) Copyright 2016 - 2021, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -11,6 +11,7 @@ #include "zynqmp.dtsi" #include "zynqmp-clk-ccf.dtsi" +#include <dt-bindings/phy/phy.h> / { model = "ZynqMP zc1751-xm017-dc3 RevA"; @@ -24,6 +25,8 @@ rtc0 = &rtc; serial0 = &uart0; serial1 = &uart1; + usb0 = &usb0; + usb1 = &usb1; }; chosen { @@ -35,6 +38,18 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; }; + + clock_si5338_2: clk26 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + clock_si5338_3: clk125 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; }; &fpd_dma_chan1 { @@ -107,6 +122,20 @@ clock-frequency = <400000>; }; +/* MT29F64G08AECDBJ4-6 */ +&nand0 { + status = "okay"; + arasan,has-mdma; + num-cs = <2>; +}; + +&psgtr { + status = "okay"; + /* usb3, sata */ + clocks = <&clock_si5338_2>, <&clock_si5338_3>; + clock-names = "ref2", "ref3"; +}; + &rtc { status = "okay"; }; @@ -122,6 +151,8 @@ ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>; ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + phy-names = "sata-phy"; + phys = <&psgtr 2 PHY_TYPE_SATA 0 3>; }; &sdhci1 { /* emmc with some settings */ @@ -140,11 +171,27 @@ &usb0 { status = "okay"; + phy-names = "usb3-phy"; + phys = <&psgtr 0 PHY_TYPE_USB3 0 2>; +}; + +&dwc3_0 { + status = "okay"; dr_mode = "host"; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; }; /* ULPI SMSC USB3320 */ &usb1 { status = "okay"; + phy-names = "usb3-phy"; + phys = <&psgtr 3 PHY_TYPE_USB3 1 2>; +}; + +&dwc3_1 { + status = "okay"; dr_mode = "host"; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts index 2366cd9f091a..05a2b79738af 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP zc1751-xm018-dc4 * - * (C) Copyright 2015 - 2019, Xilinx, Inc. + * (C) Copyright 2015 - 2021, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -26,6 +26,7 @@ rtc0 = &rtc; serial0 = &uart0; serial1 = &uart1; + spi0 = &qspi; }; chosen { @@ -161,6 +162,19 @@ status = "okay"; }; +&qspi { + status = "okay"; + flash@0 { + compatible = "m25p80", "jedec,spi-nor"; /* 32MB */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; /* also DUAL configuration possible */ + spi-max-frequency = <108000000>; /* Based on DC1 spec */ + }; +}; + &rtc { status = "okay"; }; @@ -176,3 +190,11 @@ &watchdog0 { status = "okay"; }; + +&zynqmp_dpdma { + status = "okay"; +}; + +&zynqmp_dpsub { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts index 41934e3525c6..ae2d03d98322 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP zc1751-xm019-dc5 * - * (C) Copyright 2015 - 2019, Xilinx, Inc. + * (C) Copyright 2015 - 2021, Xilinx, Inc. * * Siva Durga Prasad <siva.durga.paladugu@xilinx.com> * Michal Simek <michal.simek@xilinx.com> @@ -13,6 +13,7 @@ #include "zynqmp.dtsi" #include "zynqmp-clk-ccf.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/pinctrl-zynqmp.h> / { model = "ZynqMP zc1751-xm019-dc5 RevA"; @@ -74,6 +75,8 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem1_default>; phy0: ethernet-phy@0 { reg = <0>; }; @@ -85,41 +88,366 @@ &i2c0 { status = "okay"; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c0_default>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + scl-gpios = <&gpio 74 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 75 GPIO_ACTIVE_HIGH>; }; &i2c1 { status = "okay"; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 76 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 77 GPIO_ACTIVE_HIGH>; + +}; + +&pinctrl0 { + status = "okay"; + pinctrl_i2c0_default: i2c0-default { + mux { + groups = "i2c0_18_grp"; + function = "i2c0"; + }; + + conf { + groups = "i2c0_18_grp"; + bias-pull-up; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_i2c0_gpio: i2c0-gpio { + mux { + groups = "gpio0_74_grp", "gpio0_75_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_74_grp", "gpio0_75_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_i2c1_default: i2c1-default { + mux { + groups = "i2c1_19_grp"; + function = "i2c1"; + }; + + conf { + groups = "i2c1_19_grp"; + bias-pull-up; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + mux { + groups = "gpio0_76_grp", "gpio0_77_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_76_grp", "gpio0_77_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_uart0_default: uart0-default { + mux { + groups = "uart0_17_grp"; + function = "uart0"; + }; + + conf { + groups = "uart0_17_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO70"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO71"; + bias-disable; + }; + }; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_18_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_18_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO73"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO72"; + bias-disable; + }; + }; + + pinctrl_gem1_default: gem1-default { + mux { + function = "ethernet1"; + groups = "ethernet1_0_grp"; + }; + + conf { + groups = "ethernet1_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO44", "MIO45", "MIO46", "MIO47", "MIO48", + "MIO49"; + bias-high-impedance; + low-power-disable; + }; + + conf-tx { + pins = "MIO38", "MIO39", "MIO40", "MIO41", "MIO42", + "MIO43"; + bias-disable; + low-power-enable; + }; + + mux-mdio { + function = "mdio1"; + groups = "mdio1_0_grp"; + }; + + conf-mdio { + groups = "mdio1_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + bias-disable; + }; + }; + + pinctrl_sdhci0_default: sdhci0-default { + mux { + groups = "sdio0_0_grp"; + function = "sdio0"; + }; + + conf { + groups = "sdio0_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + bias-disable; + }; + + mux-cd { + groups = "sdio0_cd_0_grp"; + function = "sdio0_cd"; + }; + + conf-cd { + groups = "sdio0_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + mux-wp { + groups = "sdio0_wp_0_grp"; + function = "sdio0_wp"; + }; + + conf-wp { + groups = "sdio0_wp_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_watchdog0_default: watchdog0-default { + mux-clk { + groups = "swdt0_clk_1_grp"; + function = "swdt0_clk"; + }; + + conf-clk { + groups = "swdt0_clk_1_grp"; + bias-pull-up; + }; + + mux-rst { + groups = "swdt0_rst_1_grp"; + function = "swdt0_rst"; + }; + + conf-rst { + groups = "swdt0_rst_1_grp"; + bias-disable; + slew-rate = <SLEW_RATE_SLOW>; + }; + }; + + pinctrl_ttc0_default: ttc0-default { + mux-clk { + groups = "ttc0_clk_0_grp"; + function = "ttc0_clk"; + }; + + conf-clk { + groups = "ttc0_clk_0_grp"; + bias-pull-up; + }; + + mux-wav { + groups = "ttc0_wav_0_grp"; + function = "ttc0_wav"; + }; + + conf-wav { + groups = "ttc0_wav_0_grp"; + bias-disable; + slew-rate = <SLEW_RATE_SLOW>; + }; + }; + + pinctrl_ttc1_default: ttc1-default { + mux-clk { + groups = "ttc1_clk_0_grp"; + function = "ttc1_clk"; + }; + + conf-clk { + groups = "ttc1_clk_0_grp"; + bias-pull-up; + }; + + mux-wav { + groups = "ttc1_wav_0_grp"; + function = "ttc1_wav"; + }; + + conf-wav { + groups = "ttc1_wav_0_grp"; + bias-disable; + slew-rate = <SLEW_RATE_SLOW>; + }; + }; + + pinctrl_ttc2_default: ttc2-default { + mux-clk { + groups = "ttc2_clk_0_grp"; + function = "ttc2_clk"; + }; + + conf-clk { + groups = "ttc2_clk_0_grp"; + bias-pull-up; + }; + + mux-wav { + groups = "ttc2_wav_0_grp"; + function = "ttc2_wav"; + }; + + conf-wav { + groups = "ttc2_wav_0_grp"; + bias-disable; + slew-rate = <SLEW_RATE_SLOW>; + }; + }; + + pinctrl_ttc3_default: ttc3-default { + mux-clk { + groups = "ttc3_clk_0_grp"; + function = "ttc3_clk"; + }; + + conf-clk { + groups = "ttc3_clk_0_grp"; + bias-pull-up; + }; + + mux-wav { + groups = "ttc3_wav_0_grp"; + function = "ttc3_wav"; + }; + + conf-wav { + groups = "ttc3_wav_0_grp"; + bias-disable; + slew-rate = <SLEW_RATE_SLOW>; + }; + }; }; &sdhci0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci0_default>; no-1-8-v; + xlnx,mio-bank = <0>; }; &ttc0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ttc0_default>; }; &ttc1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ttc1_default>; }; &ttc2 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ttc2_default>; }; &ttc3 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ttc3_default>; }; &uart0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0_default>; }; &uart1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; }; &watchdog0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_watchdog0_default>; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts index a53598c3624b..f6aad4159ccd 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU100 revC * - * (C) Copyright 2016 - 2019, Xilinx, Inc. + * (C) Copyright 2016 - 2021, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> * Nathalie Chan King Choy @@ -15,6 +15,7 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/pinctrl-zynqmp.h> #include <dt-bindings/phy/phy.h> / { @@ -29,6 +30,8 @@ serial2 = &dcc; spi0 = &spi0; spi1 = &spi1; + usb0 = &usb0; + usb1 = &usb1; mmc0 = &sdhci0; mmc1 = &sdhci1; }; @@ -110,13 +113,13 @@ io-channels = <&u35 0>, <&u35 1>, <&u35 2>, <&u35 3>; }; - si5335a_0: clk26 { + si5335_0: si5335_0 { /* clk0_usb - u23 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <26000000>; }; - si5335a_1: clk27 { + si5335_1: si5335_1 { /* clk1_dp - u23 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <27000000>; @@ -160,6 +163,11 @@ &i2c1 { status = "okay"; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 4 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; clock-frequency = <100000>; i2c-mux@75 { /* u11 */ compatible = "nxp,pca9548"; @@ -237,10 +245,225 @@ }; }; +&pinctrl0 { + status = "okay"; + pinctrl_i2c1_default: i2c1-default { + mux { + groups = "i2c1_1_grp"; + function = "i2c1"; + }; + + conf { + groups = "i2c1_1_grp"; + bias-pull-up; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + mux { + groups = "gpio0_4_grp", "gpio0_5_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_4_grp", "gpio0_5_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_sdhci0_default: sdhci0-default { + mux { + groups = "sdio0_3_grp"; + function = "sdio0"; + }; + + conf { + groups = "sdio0_3_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + bias-disable; + }; + + mux-cd { + groups = "sdio0_cd_0_grp"; + function = "sdio0_cd"; + }; + + conf-cd { + groups = "sdio0_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_sdhci1_default: sdhci1-default { + mux { + groups = "sdio1_2_grp"; + function = "sdio1"; + }; + + conf { + groups = "sdio1_2_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + bias-disable; + }; + }; + + pinctrl_spi0_default: spi0-default { + mux { + groups = "spi0_3_grp"; + function = "spi0"; + }; + + conf { + groups = "spi0_3_grp"; + bias-disable; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + mux-cs { + groups = "spi0_ss_9_grp"; + function = "spi0_ss"; + }; + + conf-cs { + groups = "spi0_ss_9_grp"; + bias-disable; + }; + + }; + + pinctrl_spi1_default: spi1-default { + mux { + groups = "spi1_0_grp"; + function = "spi1"; + }; + + conf { + groups = "spi1_0_grp"; + bias-disable; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + mux-cs { + groups = "spi1_ss_0_grp"; + function = "spi1_ss"; + }; + + conf-cs { + groups = "spi1_ss_0_grp"; + bias-disable; + }; + + }; + + pinctrl_uart0_default: uart0-default { + mux { + groups = "uart0_0_grp"; + function = "uart0"; + }; + + conf { + groups = "uart0_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO3"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO2"; + bias-disable; + }; + }; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_0_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO1"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO0"; + bias-disable; + }; + }; + + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + }; + }; + + pinctrl_usb1_default: usb1-default { + mux { + groups = "usb1_0_grp"; + function = "usb1"; + }; + + conf { + groups = "usb1_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO64", "MIO65", "MIO67"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71", + "MIO72", "MIO73", "MIO74", "MIO75"; + bias-disable; + }; + }; +}; + &psgtr { status = "okay"; - /* usb3, dps */ - clocks = <&si5335a_0>, <&si5335a_1>; + /* usb3, dp */ + clocks = <&si5335_0>, <&si5335_1>; clock-names = "ref0", "ref1"; }; @@ -253,12 +476,16 @@ status = "okay"; no-1-8-v; disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci0_default>; xlnx,mio-bank = <0>; }; &sdhci1 { status = "okay"; bus-width = <0x4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci1_default>; xlnx,mio-bank = <0>; non-removable; disable-wp; @@ -279,16 +506,22 @@ status = "okay"; label = "LS-SPI0"; num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0_default>; }; &spi1 { /* High Speed connector */ status = "okay"; label = "HS-SPI1"; num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; }; &uart0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0_default>; bluetooth { compatible = "ti,wl1831-st"; enable-gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; @@ -297,19 +530,38 @@ &uart1 { status = "okay"; - + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; }; /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 0>; +}; + +&dwc3_0 { + status = "okay"; dr_mode = "peripheral"; + maximum-speed = "super-speed"; }; /* ULPI SMSC USB3320 */ &usb1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 3 PHY_TYPE_USB3 1 0>; +}; + +&dwc3_1 { + status = "okay"; dr_mode = "host"; + maximum-speed = "super-speed"; }; &watchdog0 { diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.1.dts new file mode 100644 index 000000000000..b6798394fcf4 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.1.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZCU102 Rev1.1 + * + * (C) Copyright 2016 - 2020, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +#include "zynqmp-zcu102-rev1.0.dts" + +/ { + model = "ZynqMP ZCU102 Rev1.1"; + compatible = "xlnx,zynqmp-zcu102-rev1.1", "xlnx,zynqmp-zcu102", "xlnx,zynqmp"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts index eca6c2de84a7..7b9a88b125d1 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU102 RevA * - * (C) Copyright 2015 - 2019, Xilinx, Inc. + * (C) Copyright 2015 - 2021, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -13,6 +13,7 @@ #include "zynqmp-clk-ccf.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/pinctrl-zynqmp.h> #include <dt-bindings/phy/phy.h> / { @@ -24,10 +25,13 @@ i2c0 = &i2c0; i2c1 = &i2c1; mmc0 = &sdhci1; + nvmem0 = &eeprom; rtc0 = &rtc; serial0 = &uart0; serial1 = &uart1; serial2 = &dcc; + spi0 = &qspi; + usb0 = &usb0; }; chosen { @@ -150,6 +154,8 @@ &can1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_default>; }; &dcc { @@ -192,22 +198,32 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem3_default>; phy0: ethernet-phy@21 { reg = <21>; ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; ti,fifo-depth = <0x1>; ti,dp83867-rxctrl-strap-quirk; + /* reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>; */ }; }; &gpio { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_default>; }; &i2c0 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c0_default>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; tca6416_u97: gpio@20 { compatible = "ti,tca6416"; @@ -451,7 +467,6 @@ status = "disabled"; /* unreachable */ reg = <0x20>; }; - max20751@72 { /* u95 */ compatible = "maxim,max20751"; reg = <0x72>; @@ -468,6 +483,11 @@ &i2c1 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; /* PL i2c via PCA9306 - u45 */ i2c-mux@74 { /* u34 */ @@ -642,6 +662,269 @@ }; }; +&pinctrl0 { + status = "okay"; + pinctrl_i2c0_default: i2c0-default { + mux { + groups = "i2c0_3_grp"; + function = "i2c0"; + }; + + conf { + groups = "i2c0_3_grp"; + bias-pull-up; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_i2c0_gpio: i2c0-gpio { + mux { + groups = "gpio0_14_grp", "gpio0_15_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_14_grp", "gpio0_15_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_i2c1_default: i2c1-default { + mux { + groups = "i2c1_4_grp"; + function = "i2c1"; + }; + + conf { + groups = "i2c1_4_grp"; + bias-pull-up; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + mux { + groups = "gpio0_16_grp", "gpio0_17_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_16_grp", "gpio0_17_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_uart0_default: uart0-default { + mux { + groups = "uart0_4_grp"; + function = "uart0"; + }; + + conf { + groups = "uart0_4_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO18"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO19"; + bias-disable; + }; + }; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_5_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_5_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO21"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO20"; + bias-disable; + }; + }; + + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + }; + }; + + pinctrl_gem3_default: gem3-default { + mux { + function = "ethernet3"; + groups = "ethernet3_0_grp"; + }; + + conf { + groups = "ethernet3_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74", + "MIO75"; + bias-high-impedance; + low-power-disable; + }; + + conf-tx { + pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68", + "MIO69"; + bias-disable; + low-power-enable; + }; + + mux-mdio { + function = "mdio3"; + groups = "mdio3_0_grp"; + }; + + conf-mdio { + groups = "mdio3_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + bias-disable; + }; + }; + + pinctrl_can1_default: can1-default { + mux { + function = "can1"; + groups = "can1_6_grp"; + }; + + conf { + groups = "can1_6_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO25"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO24"; + bias-disable; + }; + }; + + pinctrl_sdhci1_default: sdhci1-default { + mux { + groups = "sdio1_0_grp"; + function = "sdio1"; + }; + + conf { + groups = "sdio1_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + bias-disable; + }; + + mux-cd { + groups = "sdio1_cd_0_grp"; + function = "sdio1_cd"; + }; + + conf-cd { + groups = "sdio1_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + mux-wp { + groups = "sdio1_wp_0_grp"; + function = "sdio1_wp"; + }; + + conf-wp { + groups = "sdio1_wp_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_gpio_default: gpio-default { + mux-sw { + function = "gpio0"; + groups = "gpio0_22_grp", "gpio0_23_grp"; + }; + + conf-sw { + groups = "gpio0_22_grp", "gpio0_23_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + mux-msp { + function = "gpio0"; + groups = "gpio0_13_grp", "gpio0_38_grp"; + }; + + conf-msp { + groups = "gpio0_13_grp", "gpio0_38_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-pull-up { + pins = "MIO22", "MIO23"; + bias-pull-up; + }; + + conf-pull-none { + pins = "MIO13", "MIO38"; + bias-disable; + }; + }; +}; + &pcie { status = "okay"; }; @@ -653,6 +936,19 @@ clock-names = "ref0", "ref1", "ref2", "ref3"; }; +&qspi { + status = "okay"; + flash@0 { + compatible = "m25p80", "jedec,spi-nor"; /* 16MB + 16MB */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ + spi-max-frequency = <108000000>; /* Based on DC1 spec */ + }; +}; + &rtc { status = "okay"; }; @@ -675,22 +971,42 @@ /* SD1 with level shifter */ &sdhci1 { status = "okay"; + /* + * 1.0 revision has level shifter and this property should be + * removed for supporting UHS mode + */ no-1-8-v; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci1_default>; xlnx,mio-bank = <1>; }; &uart0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0_default>; }; &uart1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; }; /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; +}; + +&dwc3_0 { + status = "okay"; dr_mode = "host"; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; }; &watchdog0 { diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts index d9ad8a4b20d3..f7d718ff116b 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU102 RevB * - * (C) Copyright 2016 - 2018, Xilinx, Inc. + * (C) Copyright 2016 - 2021, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -22,6 +22,7 @@ ti,tx-internal-delay = <0xa>; ti,fifo-depth = <0x1>; ti,dp83867-rxctrl-strap-quirk; + /* reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>; */ }; /* Cleanup from RevA */ /delete-node/ ethernet-phy@21; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts index 5637e1c17fdf..bd8f20f3223d 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU104 * - * (C) Copyright 2017 - 2019, Xilinx, Inc. + * (C) Copyright 2017 - 2021, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -12,6 +12,7 @@ #include "zynqmp.dtsi" #include "zynqmp-clk-ccf.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/pinctrl-zynqmp.h> #include <dt-bindings/phy/phy.h> / { @@ -22,10 +23,13 @@ ethernet0 = &gem3; i2c0 = &i2c1; mmc0 = &sdhci1; + nvmem0 = &eeprom; rtc0 = &rtc; serial0 = &uart0; serial1 = &uart1; serial2 = &dcc; + spi0 = &qspi; + usb0 = &usb0; }; chosen { @@ -59,16 +63,52 @@ &can1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_default>; }; &dcc { status = "okay"; }; +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + &gem3 { status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem3_default>; phy0: ethernet-phy@c { reg = <0xc>; ti,rx-internal-delay = <0x8>; @@ -85,6 +125,11 @@ &i2c1 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; /* Another connection to this bus via PL i2c via PCA9306 - u45 */ i2c-mux@74 { /* u34 */ @@ -104,7 +149,7 @@ * 512B - 768B address 0x56 * 768B - 1024B address 0x57 */ - eeprom@54 { /* u23 */ + eeprom: eeprom@54 { /* u23 */ compatible = "atmel,24c08"; reg = <0x54>; #address-cells = <1>; @@ -116,20 +161,20 @@ #address-cells = <1>; #size-cells = <0>; reg = <1>; - clock_8t49n287: clock-generator@6c { /* 8T49N287 - u182 */ - reg = <0x6c>; - }; + /* 8T49N287 - u182 */ }; i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; - irps5401_43: irps54012@43 { /* IRPS5401 - u175 */ - reg = <0x43>; + irps5401_43: irps5401@43 { /* IRPS5401 - u175 */ + compatible = "infineon,irps5401"; + reg = <0x43>; /* pmbus / i2c 0x13 */ }; - irps5401_4d: irps54012@4d { /* IRPS5401 - u180 */ - reg = <0x4d>; + irps5401_44: irps5401@44 { /* IRPS5401 - u180 */ + compatible = "infineon,irps5401"; + reg = <0x44>; /* pmbus / i2c 0x14 */ }; }; @@ -173,8 +218,202 @@ }; }; -&rtc { +&pinctrl0 { status = "okay"; + + pinctrl_can1_default: can1-default { + mux { + function = "can1"; + groups = "can1_6_grp"; + }; + + conf { + groups = "can1_6_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO25"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO24"; + bias-disable; + }; + }; + + pinctrl_i2c1_default: i2c1-default { + mux { + groups = "i2c1_4_grp"; + function = "i2c1"; + }; + + conf { + groups = "i2c1_4_grp"; + bias-pull-up; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + drive-strength = <12>; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + mux { + groups = "gpio0_16_grp", "gpio0_17_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_16_grp", "gpio0_17_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + drive-strength = <12>; + }; + }; + + pinctrl_gem3_default: gem3-default { + mux { + function = "ethernet3"; + groups = "ethernet3_0_grp"; + }; + + conf { + groups = "ethernet3_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74", + "MIO75"; + bias-high-impedance; + low-power-disable; + }; + + conf-tx { + pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68", + "MIO69"; + bias-disable; + low-power-enable; + }; + + mux-mdio { + function = "mdio3"; + groups = "mdio3_0_grp"; + }; + + conf-mdio { + groups = "mdio3_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + bias-disable; + }; + }; + + pinctrl_sdhci1_default: sdhci1-default { + mux { + groups = "sdio1_0_grp"; + function = "sdio1"; + }; + + conf { + groups = "sdio1_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + bias-disable; + drive-strength = <12>; + }; + + mux-cd { + groups = "sdio1_cd_0_grp"; + function = "sdio1_cd"; + }; + + conf-cd { + groups = "sdio1_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_uart0_default: uart0-default { + mux { + groups = "uart0_4_grp"; + function = "uart0"; + }; + + conf { + groups = "uart0_4_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO18"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO19"; + bias-disable; + }; + }; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_5_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_5_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO21"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO20"; + bias-disable; + }; + }; + + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + }; + }; }; &psgtr { @@ -184,6 +423,23 @@ clock-names = "ref1", "ref2", "ref3"; }; +&qspi { + status = "okay"; + flash@0 { + compatible = "m25p80", "jedec,spi-nor"; /* n25q512a 128MiB */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; /* Based on DC1 spec */ + }; +}; + +&rtc { + status = "okay"; +}; + &sata { status = "okay"; /* SATA OOB timing settings */ @@ -203,22 +459,38 @@ &sdhci1 { status = "okay"; no-1-8-v; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci1_default>; xlnx,mio-bank = <1>; disable-wp; }; &uart0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0_default>; }; &uart1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; }; /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; +}; + +&dwc3_0 { + status = "okay"; dr_mode = "host"; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; }; &watchdog0 { diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts index 7f2e32831b05..96feaad30166 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU104 * - * (C) Copyright 2017 - 2020, Xilinx, Inc. + * (C) Copyright 2017 - 2021, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -12,6 +12,7 @@ #include "zynqmp.dtsi" #include "zynqmp-clk-ccf.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/pinctrl-zynqmp.h> #include <dt-bindings/phy/phy.h> / { @@ -22,10 +23,13 @@ ethernet0 = &gem3; i2c0 = &i2c1; mmc0 = &sdhci1; + nvmem0 = &eeprom; rtc0 = &rtc; serial0 = &uart0; serial1 = &uart1; serial2 = &dcc; + spi0 = &qspi; + usb0 = &usb0; }; chosen { @@ -64,6 +68,8 @@ &can1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_default>; }; &dcc { @@ -106,6 +112,8 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem3_default>; phy0: ethernet-phy@c { reg = <0xc>; ti,rx-internal-delay = <0x8>; @@ -122,6 +130,11 @@ &i2c1 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; tca6416_u97: gpio@20 { compatible = "ti,tca6416"; @@ -172,9 +185,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <1>; - clock_8t49n287: clock-generator@6c { /* 8T49N287 - u182 */ - reg = <0x6c>; - }; + /* 8T49N287 - u182 */ }; i2c@2 { @@ -219,6 +230,211 @@ }; }; +&pinctrl0 { + status = "okay"; + + pinctrl_can1_default: can1-default { + mux { + function = "can1"; + groups = "can1_6_grp"; + }; + + conf { + groups = "can1_6_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO25"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO24"; + bias-disable; + }; + }; + + pinctrl_i2c1_default: i2c1-default { + mux { + groups = "i2c1_4_grp"; + function = "i2c1"; + }; + + conf { + groups = "i2c1_4_grp"; + bias-pull-up; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + drive-strength = <12>; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + mux { + groups = "gpio0_16_grp", "gpio0_17_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_16_grp", "gpio0_17_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + drive-strength = <12>; + }; + }; + + pinctrl_gem3_default: gem3-default { + mux { + function = "ethernet3"; + groups = "ethernet3_0_grp"; + }; + + conf { + groups = "ethernet3_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74", + "MIO75"; + bias-high-impedance; + low-power-disable; + }; + + conf-tx { + pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68", + "MIO69"; + bias-disable; + low-power-enable; + }; + + mux-mdio { + function = "mdio3"; + groups = "mdio3_0_grp"; + }; + + conf-mdio { + groups = "mdio3_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + bias-disable; + }; + }; + + pinctrl_sdhci1_default: sdhci1-default { + mux { + groups = "sdio1_0_grp"; + function = "sdio1"; + }; + + conf { + groups = "sdio1_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + bias-disable; + drive-strength = <12>; + }; + + mux-cd { + groups = "sdio1_cd_0_grp"; + function = "sdio1_cd"; + }; + + conf-cd { + groups = "sdio1_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_uart0_default: uart0-default { + mux { + groups = "uart0_4_grp"; + function = "uart0"; + }; + + conf { + groups = "uart0_4_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO18"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO19"; + bias-disable; + }; + }; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_5_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_5_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO21"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO20"; + bias-disable; + }; + }; + + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + drive-strength = <12>; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + }; + }; +}; + +&psgtr { + status = "okay"; + /* nc, sata, usb3, dp */ + clocks = <&clock_8t49n287_5>, <&clock_8t49n287_2>, <&clock_8t49n287_3>; + clock-names = "ref1", "ref2", "ref3"; +}; + &qspi { status = "okay"; flash@0 { @@ -226,6 +442,9 @@ #address-cells = <1>; #size-cells = <1>; reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; /* Based on DC1 spec */ }; }; @@ -233,13 +452,6 @@ status = "okay"; }; -&psgtr { - status = "okay"; - /* nc, sata, usb3, dp */ - clocks = <&clock_8t49n287_5>, <&clock_8t49n287_2>, <&clock_8t49n287_3>; - clock-names = "ref1", "ref2", "ref3"; -}; - &sata { status = "okay"; /* SATA OOB timing settings */ @@ -259,22 +471,38 @@ &sdhci1 { status = "okay"; no-1-8-v; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci1_default>; xlnx,mio-bank = <1>; disable-wp; }; &uart0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0_default>; }; &uart1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; }; /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; +}; + +&dwc3_0 { + status = "okay"; dr_mode = "host"; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; }; &watchdog0 { diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts index eff7c6447087..20b7c75bb1d3 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU106 * - * (C) Copyright 2016 - 2019, Xilinx, Inc. + * (C) Copyright 2016 - 2021, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -13,6 +13,7 @@ #include "zynqmp-clk-ccf.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/pinctrl-zynqmp.h> #include <dt-bindings/phy/phy.h> / { @@ -24,10 +25,13 @@ i2c0 = &i2c0; i2c1 = &i2c1; mmc0 = &sdhci1; + nvmem0 = &eeprom; rtc0 = &rtc; serial0 = &uart0; serial1 = &uart1; serial2 = &dcc; + spi0 = &qspi; + usb0 = &usb0; }; chosen { @@ -150,24 +154,14 @@ &can1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_default>; }; &dcc { status = "okay"; }; -&zynqmp_dpdma { - status = "okay"; -}; - -&zynqmp_dpsub { - status = "okay"; - phy-names = "dp-phy0", "dp-phy1"; - phys = <&psgtr 1 PHY_TYPE_DP 0 3>, - <&psgtr 0 PHY_TYPE_DP 1 3>; -}; - -/* fpd_dma clk 667MHz, lpd_dma 500MHz */ &fpd_dma_chan1 { status = "okay"; }; @@ -204,6 +198,8 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem3_default>; phy0: ethernet-phy@c { reg = <0xc>; ti,rx-internal-delay = <0x8>; @@ -215,11 +211,18 @@ &gpio { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_default>; }; &i2c0 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c0_default>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; tca6416_u97: gpio@20 { compatible = "ti,tca6416"; @@ -478,6 +481,11 @@ &i2c1 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; /* PL i2c via PCA9306 - u45 */ i2c-mux@74 { /* u34 */ @@ -652,6 +660,269 @@ }; }; +&pinctrl0 { + status = "okay"; + pinctrl_i2c0_default: i2c0-default { + mux { + groups = "i2c0_3_grp"; + function = "i2c0"; + }; + + conf { + groups = "i2c0_3_grp"; + bias-pull-up; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_i2c0_gpio: i2c0-gpio { + mux { + groups = "gpio0_14_grp", "gpio0_15_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_14_grp", "gpio0_15_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_i2c1_default: i2c1-default { + mux { + groups = "i2c1_4_grp"; + function = "i2c1"; + }; + + conf { + groups = "i2c1_4_grp"; + bias-pull-up; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + mux { + groups = "gpio0_16_grp", "gpio0_17_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_16_grp", "gpio0_17_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_uart0_default: uart0-default { + mux { + groups = "uart0_4_grp"; + function = "uart0"; + }; + + conf { + groups = "uart0_4_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO18"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO19"; + bias-disable; + }; + }; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_5_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_5_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO21"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO20"; + bias-disable; + }; + }; + + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + }; + }; + + pinctrl_gem3_default: gem3-default { + mux { + function = "ethernet3"; + groups = "ethernet3_0_grp"; + }; + + conf { + groups = "ethernet3_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74", + "MIO75"; + bias-high-impedance; + low-power-disable; + }; + + conf-tx { + pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68", + "MIO69"; + bias-disable; + low-power-enable; + }; + + mux-mdio { + function = "mdio3"; + groups = "mdio3_0_grp"; + }; + + conf-mdio { + groups = "mdio3_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + bias-disable; + }; + }; + + pinctrl_can1_default: can1-default { + mux { + function = "can1"; + groups = "can1_6_grp"; + }; + + conf { + groups = "can1_6_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO25"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO24"; + bias-disable; + }; + }; + + pinctrl_sdhci1_default: sdhci1-default { + mux { + groups = "sdio1_0_grp"; + function = "sdio1"; + }; + + conf { + groups = "sdio1_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + bias-disable; + }; + + mux-cd { + groups = "sdio1_cd_0_grp"; + function = "sdio1_cd"; + }; + + conf-cd { + groups = "sdio1_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + mux-wp { + groups = "sdio1_wp_0_grp"; + function = "sdio1_wp"; + }; + + conf-wp { + groups = "sdio1_wp_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_gpio_default: gpio-default { + mux { + function = "gpio0"; + groups = "gpio0_22_grp", "gpio0_23_grp"; + }; + + conf { + groups = "gpio0_22_grp", "gpio0_23_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + mux-msp { + function = "gpio0"; + groups = "gpio0_13_grp", "gpio0_38_grp"; + }; + + conf-msp { + groups = "gpio0_13_grp", "gpio0_38_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-pull-up { + pins = "MIO22"; + bias-pull-up; + }; + + conf-pull-none { + pins = "MIO13", "MIO23", "MIO38"; + bias-disable; + }; + }; +}; + &psgtr { status = "okay"; /* nc, sata, usb3, dp */ @@ -659,6 +930,19 @@ clock-names = "ref1", "ref2", "ref3"; }; +&qspi { + status = "okay"; + flash@0 { + compatible = "m25p80", "jedec,spi-nor"; /* 16MB + 16MB */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ + spi-max-frequency = <108000000>; /* Based on DC1 spec */ + }; +}; + &rtc { status = "okay"; }; @@ -681,24 +965,54 @@ /* SD1 with level shifter */ &sdhci1 { status = "okay"; + /* + * This property should be removed for supporting UHS mode + */ no-1-8-v; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci1_default>; xlnx,mio-bank = <1>; }; &uart0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0_default>; }; &uart1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; }; /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; +}; + +&dwc3_0 { + status = "okay"; dr_mode = "host"; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; }; &watchdog0 { status = "okay"; }; + +&zynqmp_dpdma { + status = "okay"; +}; + +&zynqmp_dpsub { + status = "okay"; + phy-names = "dp-phy0", "dp-phy1"; + phys = <&psgtr 1 PHY_TYPE_DP 0 3>, + <&psgtr 0 PHY_TYPE_DP 1 3>; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts index d4b68f0d0098..e36df6adbeee 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU111 * - * (C) Copyright 2017 - 2019, Xilinx, Inc. + * (C) Copyright 2017 - 2021, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -13,6 +13,7 @@ #include "zynqmp-clk-ccf.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/pinctrl-zynqmp.h> #include <dt-bindings/phy/phy.h> / { @@ -24,9 +25,12 @@ i2c0 = &i2c0; i2c1 = &i2c1; mmc0 = &sdhci1; + nvmem0 = &eeprom; rtc0 = &rtc; serial0 = &uart0; serial1 = &dcc; + spi0 = &qspi; + usb0 = &usb0; }; chosen { @@ -166,6 +170,8 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gem3_default>; phy0: ethernet-phy@c { reg = <0xc>; ti,rx-internal-delay = <0x8>; @@ -177,11 +183,18 @@ &gpio { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_default>; }; &i2c0 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c0_default>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; tca6416_u22: gpio@20 { compatible = "ti,tca6416"; @@ -326,13 +339,16 @@ #address-cells = <1>; #size-cells = <0>; reg = <2>; - irps5401_43: irps54012@43 { /* IRPS5401 - u53 check these */ + irps5401_43: irps5401@43 { /* IRPS5401 - u53 check these */ + compatible = "infineon,irps5401"; reg = <0x43>; }; - irps5401_44: irps54012@44 { /* IRPS5401 - u55 */ + irps5401_44: irps5401@44 { /* IRPS5401 - u55 */ + compatible = "infineon,irps5401"; reg = <0x44>; }; - irps5401_45: irps54012@45 { /* IRPS5401 - u57 */ + irps5401_45: irps5401@45 { /* IRPS5401 - u57 */ + compatible = "infineon,irps5401"; reg = <0x45>; }; /* u68 IR38064 +0 */ @@ -354,6 +370,11 @@ &i2c1 { status = "okay"; clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; i2c-mux@74 { /* u26 */ compatible = "nxp,pca9548"; @@ -455,9 +476,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <4>; - si5382: clock-generator@69 { /* SI5382 - u48 */ - reg = <0x69>; - }; + /* SI5382 - u48 */ }; i2c@5 { #address-cells = <1>; @@ -542,13 +561,230 @@ }; }; +&pinctrl0 { + status = "okay"; + pinctrl_i2c0_default: i2c0-default { + mux { + groups = "i2c0_3_grp"; + function = "i2c0"; + }; + + conf { + groups = "i2c0_3_grp"; + bias-pull-up; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_i2c0_gpio: i2c0-gpio { + mux { + groups = "gpio0_14_grp", "gpio0_15_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_14_grp", "gpio0_15_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_i2c1_default: i2c1-default { + mux { + groups = "i2c1_4_grp"; + function = "i2c1"; + }; + + conf { + groups = "i2c1_4_grp"; + bias-pull-up; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_i2c1_gpio: i2c1-gpio { + mux { + groups = "gpio0_16_grp", "gpio0_17_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_16_grp", "gpio0_17_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_uart0_default: uart0-default { + mux { + groups = "uart0_4_grp"; + function = "uart0"; + }; + + conf { + groups = "uart0_4_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO18"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO19"; + bias-disable; + }; + }; + + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO52", "MIO53", "MIO55"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", + "MIO60", "MIO61", "MIO62", "MIO63"; + bias-disable; + }; + }; + + pinctrl_gem3_default: gem3-default { + mux { + function = "ethernet3"; + groups = "ethernet3_0_grp"; + }; + + conf { + groups = "ethernet3_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74", + "MIO75"; + bias-high-impedance; + low-power-disable; + }; + + conf-tx { + pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68", + "MIO69"; + bias-disable; + low-power-enable; + }; + + mux-mdio { + function = "mdio3"; + groups = "mdio3_0_grp"; + }; + + conf-mdio { + groups = "mdio3_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + bias-disable; + }; + }; + + pinctrl_sdhci1_default: sdhci1-default { + mux { + groups = "sdio1_0_grp"; + function = "sdio1"; + }; + + conf { + groups = "sdio1_0_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + bias-disable; + }; + + mux-cd { + groups = "sdio1_cd_0_grp"; + function = "sdio1_cd"; + }; + + conf-cd { + groups = "sdio1_cd_0_grp"; + bias-high-impedance; + bias-pull-up; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + }; + + pinctrl_gpio_default: gpio-default { + mux { + function = "gpio0"; + groups = "gpio0_22_grp", "gpio0_23_grp"; + }; + + conf { + groups = "gpio0_22_grp", "gpio0_23_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + mux-msp { + function = "gpio0"; + groups = "gpio0_13_grp", "gpio0_38_grp"; + }; + + conf-msp { + groups = "gpio0_13_grp", "gpio0_38_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-pull-up { + pins = "MIO22"; + bias-pull-up; + }; + + conf-pull-none { + pins = "MIO13", "MIO23", "MIO38"; + bias-disable; + }; + }; +}; + &psgtr { status = "okay"; - /* nc, sata, usb3, dp */ - clocks = <&si5341 0 3>, <&si5341 0 2>, <&si5341 0 0>; + /* nc, dp, usb3, sata */ + clocks = <&si5341 0 0>, <&si5341 0 2>, <&si5341 0 3>; clock-names = "ref1", "ref2", "ref3"; }; +&qspi { + status = "okay"; + flash@0 { + compatible = "m25p80", "jedec,spi-nor"; /* 16MB + 16MB */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ + spi-max-frequency = <108000000>; /* Based on DC1 spec */ + }; +}; + &rtc { status = "okay"; }; @@ -565,24 +801,42 @@ ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; phy-names = "sata-phy"; - phys = <&psgtr 3 PHY_TYPE_SATA 1 1>; + phys = <&psgtr 3 PHY_TYPE_SATA 1 3>; }; /* SD1 with level shifter */ &sdhci1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci1_default>; + disable-wp; + /* + * This property should be removed for supporting UHS mode + */ no-1-8-v; xlnx,mio-bank = <1>; }; &uart0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0_default>; }; /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; +}; + +&dwc3_0 { + status = "okay"; dr_mode = "host"; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; }; &zynqmp_dpdma { diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 28dccb891a53..74e66443e4ce 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP * - * (C) Copyright 2014 - 2019, Xilinx, Inc. + * (C) Copyright 2014 - 2021, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> * @@ -156,21 +156,6 @@ mbox-names = "tx", "rx"; }; - zynqmp_clk: clock-controller { - #clock-cells = <1>; - compatible = "xlnx,zynqmp-clk"; - clocks = <&pss_ref_clk>, - <&video_clk>, - <&pss_alt_ref_clk>, - <&aux_ref_clk>, - <>_crx_ref_clk>; - clock-names = "pss_ref_clk", - "video_clk", - "pss_alt_ref_clk", - "aux_ref_clk", - "gt_crx_ref_clk"; - }; - nvmem_firmware { compatible = "xlnx,zynqmp-nvmem-fw"; #address-cells = <1>; @@ -193,6 +178,11 @@ compatible = "xlnx,zynqmp-reset"; #reset-cells = <1>; }; + + pinctrl0: pinctrl { + compatible = "xlnx,zynqmp-pinctrl"; + status = "disabled"; + }; }; }; @@ -245,6 +235,7 @@ cci: cci@fd6e0000 { compatible = "arm,cci-400"; + status = "disabled"; reg = <0x0 0xfd6e0000 0x0 0x9000>; ranges = <0x0 0x0 0xfd6e0000 0x10000>; #address-cells = <1>; @@ -630,6 +621,8 @@ <0x0 0x0 0x0 0x2 &pcie_intc 0x2>, <0x0 0x0 0x0 0x3 &pcie_intc 0x3>, <0x0 0x0 0x0 0x4 &pcie_intc 0x4>; + #stream-id-cells = <1>; + iommus = <&smmu 0x4d0>; power-domains = <&zynqmp_firmware PD_PCIE>; pcie_intc: legacy-interrupt-controller { interrupt-controller; @@ -670,7 +663,7 @@ interrupt-parent = <&gic>; interrupts = <0 26 4>, <0 27 4>; interrupt-names = "alarm", "sec"; - calibration = <0x8000>; + calibration = <0x7FFF>; }; sata: ahci@fd0c0000 { @@ -680,6 +673,7 @@ interrupt-parent = <&gic>; interrupts = <0 133 4>; power-domains = <&zynqmp_firmware PD_SATA>; + resets = <&zynqmp_reset ZYNQMP_RESET_SATA>; #stream-id-cells = <4>; iommus = <&smmu 0x4c0>, <&smmu 0x4c1>, <&smmu 0x4c2>, <&smmu 0x4c3>; @@ -792,7 +786,7 @@ }; uart0: serial@ff000000 { - compatible = "cdns,uart-r1p12", "xlnx,xuartps"; + compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 21 4>; @@ -802,7 +796,7 @@ }; uart1: serial@ff010000 { - compatible = "cdns,uart-r1p12", "xlnx,xuartps"; + compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 22 4>; @@ -811,24 +805,58 @@ power-domains = <&zynqmp_firmware PD_UART_1>; }; - usb0: usb@fe200000 { - compatible = "snps,dwc3"; + usb0: usb@ff9d0000 { + #address-cells = <2>; + #size-cells = <2>; status = "disabled"; - interrupt-parent = <&gic>; - interrupts = <0 65 4>; - reg = <0x0 0xfe200000 0x0 0x40000>; - clock-names = "clk_xin", "clk_ahb"; + compatible = "xlnx,zynqmp-dwc3"; + reg = <0x0 0xff9d0000 0x0 0x100>; + clock-names = "bus_clk", "ref_clk"; power-domains = <&zynqmp_firmware PD_USB_0>; + resets = <&zynqmp_reset ZYNQMP_RESET_USB0_CORERESET>, + <&zynqmp_reset ZYNQMP_RESET_USB0_HIBERRESET>, + <&zynqmp_reset ZYNQMP_RESET_USB0_APB>; + reset-names = "usb_crst", "usb_hibrst", "usb_apbrst"; + ranges; + + dwc3_0: usb@fe200000 { + compatible = "snps,dwc3"; + reg = <0x0 0xfe200000 0x0 0x40000>; + interrupt-parent = <&gic>; + interrupt-names = "dwc_usb3", "otg"; + interrupts = <0 65 4>, <0 69 4>; + #stream-id-cells = <1>; + iommus = <&smmu 0x860>; + snps,quirk-frame-length-adjustment = <0x20>; + /* dma-coherent; */ + }; }; - usb1: usb@fe300000 { - compatible = "snps,dwc3"; + usb1: usb@ff9e0000 { + #address-cells = <2>; + #size-cells = <2>; status = "disabled"; - interrupt-parent = <&gic>; - interrupts = <0 70 4>; - reg = <0x0 0xfe300000 0x0 0x40000>; - clock-names = "clk_xin", "clk_ahb"; + compatible = "xlnx,zynqmp-dwc3"; + reg = <0x0 0xff9e0000 0x0 0x100>; + clock-names = "bus_clk", "ref_clk"; power-domains = <&zynqmp_firmware PD_USB_1>; + resets = <&zynqmp_reset ZYNQMP_RESET_USB1_CORERESET>, + <&zynqmp_reset ZYNQMP_RESET_USB1_HIBERRESET>, + <&zynqmp_reset ZYNQMP_RESET_USB1_APB>; + reset-names = "usb_crst", "usb_hibrst", "usb_apbrst"; + ranges; + + dwc3_1: usb@fe300000 { + compatible = "snps,dwc3"; + reg = <0x0 0xfe300000 0x0 0x40000>; + interrupt-parent = <&gic>; + interrupt-names = "dwc_usb3", "otg"; + interrupts = <0 70 4>, <0 74 4>; + #stream-id-cells = <1>; + iommus = <&smmu 0x861>; + snps,quirk-frame-length-adjustment = <0x20>; + /* dma-coherent; */ + }; }; watchdog0: watchdog@fd4d0000 { @@ -837,7 +865,8 @@ interrupt-parent = <&gic>; interrupts = <0 113 1>; reg = <0x0 0xfd4d0000 0x0 0x1000>; - timeout-sec = <10>; + timeout-sec = <60>; + reset-on-timeout; }; lpd_watchdog: watchdog@ff150000 { diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c index 796fbb048cbe..3d208d627fb0 100644 --- a/drivers/watchdog/mtk_wdt.c +++ b/drivers/watchdog/mtk_wdt.c @@ -9,9 +9,9 @@ * Based on sunxi_wdt.c */ -#include <dt-bindings/reset-controller/mt2712-resets.h> -#include <dt-bindings/reset-controller/mt8183-resets.h> -#include <dt-bindings/reset-controller/mt8192-resets.h> +#include <dt-bindings/reset/mt2712-resets.h> +#include <dt-bindings/reset/mt8183-resets.h> +#include <dt-bindings/reset/mt8192-resets.h> #include <dt-bindings/reset/mt8195-resets.h> #include <linux/delay.h> #include <linux/err.h> diff --git a/include/dt-bindings/power/imx8mm-power.h b/include/dt-bindings/power/imx8mm-power.h index fc9c2e16aadc..648938f24c8e 100644 --- a/include/dt-bindings/power/imx8mm-power.h +++ b/include/dt-bindings/power/imx8mm-power.h @@ -19,4 +19,13 @@ #define IMX8MM_POWER_DOMAIN_DISPMIX 10 #define IMX8MM_POWER_DOMAIN_MIPI 11 +#define IMX8MM_VPUBLK_PD_G1 0 +#define IMX8MM_VPUBLK_PD_G2 1 +#define IMX8MM_VPUBLK_PD_H1 2 + +#define IMX8MM_DISPBLK_PD_CSI_BRIDGE 0 +#define IMX8MM_DISPBLK_PD_LCDIF 1 +#define IMX8MM_DISPBLK_PD_MIPI_DSI 2 +#define IMX8MM_DISPBLK_PD_MIPI_CSI 3 + #endif diff --git a/include/dt-bindings/reset-controller/mt2712-resets.h b/include/dt-bindings/reset/mt2712-resets.h index 9e7ee762f076..9e7ee762f076 100644 --- a/include/dt-bindings/reset-controller/mt2712-resets.h +++ b/include/dt-bindings/reset/mt2712-resets.h diff --git a/include/dt-bindings/reset/mt8173-resets.h b/include/dt-bindings/reset/mt8173-resets.h index ba8636eda5ae..6a60c7cecc4c 100644 --- a/include/dt-bindings/reset/mt8173-resets.h +++ b/include/dt-bindings/reset/mt8173-resets.h @@ -27,6 +27,8 @@ #define MT8173_INFRA_GCE_FAXI_RST 40 #define MT8173_INFRA_MMIOMMURST 47 +/* MMSYS resets */ +#define MT8173_MMSYS_SW0_RST_B_DISP_DSI0 25 /* PERICFG resets */ #define MT8173_PERI_UART0_SW_RST 0 diff --git a/include/dt-bindings/reset-controller/mt8183-resets.h b/include/dt-bindings/reset/mt8183-resets.h index a1bbd41e0d12..48c5d2de0a38 100644 --- a/include/dt-bindings/reset-controller/mt8183-resets.h +++ b/include/dt-bindings/reset/mt8183-resets.h @@ -80,6 +80,9 @@ #define MT8183_INFRACFG_SW_RST_NUM 128 +/* MMSYS resets */ +#define MT8183_MMSYS_SW0_RST_B_DISP_DSI0 25 + #define MT8183_TOPRGU_MM_SW_RST 1 #define MT8183_TOPRGU_MFG_SW_RST 2 #define MT8183_TOPRGU_VENC_SW_RST 3 diff --git a/include/dt-bindings/reset-controller/mt8192-resets.h b/include/dt-bindings/reset/mt8192-resets.h index be9a7ca245b9..be9a7ca245b9 100644 --- a/include/dt-bindings/reset-controller/mt8192-resets.h +++ b/include/dt-bindings/reset/mt8192-resets.h |