summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-12-13 12:11:01 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2016-12-13 12:11:01 -0800
commitb78b499a67c3f77aeb6cd0b54724bc38b141255d (patch)
tree8ebdb5303bb1552577182d9fe4086910b8648d22
parent098c30557a9a19827240aaadc137e4668157dc6b (diff)
parent190cc65e912de7e8f7ebddcecfbf55a610281a8c (diff)
Merge tag 'char-misc-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH: "Here's the big char/misc driver patches for 4.10-rc1. Lots of tiny changes over lots of "minor" driver subsystems, the largest being some new FPGA drivers. Other than that, a few other new drivers, but no new driver subsystems added for this kernel cycle, a nice change. All of these have been in linux-next with no reported issues" * tag 'char-misc-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (107 commits) uio-hv-generic: store physical addresses instead of virtual Tools: hv: kvp: configurable external scripts path uio-hv-generic: new userspace i/o driver for VMBus vmbus: add support for dynamic device id's hv: change clockevents unbind tactics hv: acquire vmbus_connection.channel_mutex in vmbus_free_channels() hyperv: Fix spelling of HV_UNKOWN mei: bus: enable non-blocking RX mei: fix the back to back interrupt handling mei: synchronize irq before initiating a reset. VME: Remove shutdown entry from vme_driver auxdisplay: ht16k33: select framebuffer helper modules MAINTAINERS: add git url for fpga fpga: Clarify how write_init works streaming modes fpga zynq: Fix incorrect ISR state on bootup fpga zynq: Remove priv->dev fpga zynq: Add missing \n to messages fpga: Add COMPILE_TEST to all drivers uio: pruss: add clk_disable() char/pcmcia: add some error checking in scr24x_read() ...
-rw-r--r--Documentation/ABI/testing/sysfs-class-fpga-bridge11
-rw-r--r--Documentation/ABI/testing/sysfs-class-mei16
-rw-r--r--Documentation/devicetree/bindings/display/ht16k33.txt42
-rw-r--r--Documentation/devicetree/bindings/fpga/fpga-region.txt494
-rw-r--r--Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt17
-rw-r--r--Documentation/devicetree/bindings/nvmem/lpc1850-otp.txt20
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt1
-rw-r--r--Documentation/fpga/fpga-mgr.txt43
-rw-r--r--Documentation/trace/intel_th.txt22
-rw-r--r--Documentation/trace/stm.txt37
-rw-r--r--MAINTAINERS20
-rw-r--r--arch/blackfin/mach-bf561/coreb.c10
-rw-r--r--drivers/auxdisplay/Kconfig13
-rw-r--r--drivers/auxdisplay/Makefile1
-rw-r--r--drivers/auxdisplay/ht16k33.c563
-rw-r--r--drivers/char/Kconfig3
-rw-r--r--drivers/char/pcmcia/Kconfig11
-rw-r--r--drivers/char/pcmcia/Makefile1
-rw-r--r--drivers/char/pcmcia/scr24x_cs.c373
-rw-r--r--drivers/char/ppdev.c36
-rw-r--r--drivers/char/snsc.c2
-rw-r--r--drivers/char/tile-srom.c3
-rw-r--r--drivers/fpga/Kconfig39
-rw-r--r--drivers/fpga/Makefile9
-rw-r--r--drivers/fpga/altera-fpga2sdram.c180
-rw-r--r--drivers/fpga/altera-freeze-bridge.c273
-rw-r--r--drivers/fpga/altera-hps2fpga.c222
-rw-r--r--drivers/fpga/fpga-bridge.c395
-rw-r--r--drivers/fpga/fpga-mgr.c97
-rw-r--r--drivers/fpga/fpga-region.c603
-rw-r--r--drivers/fpga/socfpga-a10.c557
-rw-r--r--drivers/fpga/socfpga.c7
-rw-r--r--drivers/fpga/zynq-fpga.c56
-rw-r--r--drivers/hv/channel.c93
-rw-r--r--drivers/hv/channel_mgmt.c10
-rw-r--r--drivers/hv/connection.c1
-rw-r--r--drivers/hv/hv.c6
-rw-r--r--drivers/hv/hv_balloon.c44
-rw-r--r--drivers/hv/hv_snapshot.c33
-rw-r--r--drivers/hv/hv_util.c9
-rw-r--r--drivers/hv/hyperv_vmbus.h12
-rw-r--r--drivers/hv/ring_buffer.c44
-rw-r--r--drivers/hv/vmbus_drv.c174
-rw-r--r--drivers/hwtracing/coresight/coresight-etm-perf.c31
-rw-r--r--drivers/hwtracing/coresight/coresight-etm.h5
-rw-r--r--drivers/hwtracing/coresight/coresight-etm3x-sysfs.c12
-rw-r--r--drivers/hwtracing/coresight/coresight-priv.h4
-rw-r--r--drivers/hwtracing/coresight/coresight-stm.c9
-rw-r--r--drivers/hwtracing/coresight/coresight-tmc-etf.c48
-rw-r--r--drivers/hwtracing/coresight/coresight-tmc-etr.c43
-rw-r--r--drivers/hwtracing/coresight/coresight-tmc.h2
-rw-r--r--drivers/hwtracing/coresight/coresight.c74
-rw-r--r--drivers/hwtracing/intel_th/core.c28
-rw-r--r--drivers/hwtracing/intel_th/gth.c26
-rw-r--r--drivers/hwtracing/intel_th/intel_th.h4
-rw-r--r--drivers/hwtracing/stm/core.c8
-rw-r--r--drivers/lightnvm/core.c10
-rw-r--r--drivers/mcb/mcb-parse.c2
-rw-r--r--drivers/misc/genwqe/card_base.h1
-rw-r--r--drivers/misc/genwqe/card_utils.c12
-rw-r--r--drivers/misc/lkdtm_bugs.c3
-rw-r--r--drivers/misc/lkdtm_perms.c7
-rw-r--r--drivers/misc/mei/amthif.c2
-rw-r--r--drivers/misc/mei/bus-fixup.c100
-rw-r--r--drivers/misc/mei/bus.c217
-rw-r--r--drivers/misc/mei/client.c23
-rw-r--r--drivers/misc/mei/client.h2
-rw-r--r--drivers/misc/mei/hw-me-regs.h2
-rw-r--r--drivers/misc/mei/hw-me.c90
-rw-r--r--drivers/misc/mei/hw-me.h2
-rw-r--r--drivers/misc/mei/hw-txe.c18
-rw-r--r--drivers/misc/mei/init.c6
-rw-r--r--drivers/misc/mei/interrupt.c7
-rw-r--r--drivers/misc/mei/main.c45
-rw-r--r--drivers/misc/mei/mei_dev.h38
-rw-r--r--drivers/misc/mei/pci-me.c1
-rw-r--r--drivers/nfc/mei_phy.c42
-rw-r--r--drivers/nfc/microread/mei.c23
-rw-r--r--drivers/nfc/pn544/mei.c23
-rw-r--r--drivers/nvmem/Kconfig22
-rw-r--r--drivers/nvmem/Makefile4
-rw-r--r--drivers/nvmem/bcm-ocotp.c335
-rw-r--r--drivers/nvmem/lpc18xx_otp.c124
-rw-r--r--drivers/of/overlay.c47
-rw-r--r--drivers/platform/goldfish/goldfish_pipe.c6
-rw-r--r--drivers/s390/char/sclp_ctl.c4
-rw-r--r--drivers/thunderbolt/nhi_regs.h6
-rw-r--r--drivers/uio/Kconfig9
-rw-r--r--drivers/uio/Makefile1
-rw-r--r--drivers/uio/uio_hv_generic.c218
-rw-r--r--drivers/uio/uio_pruss.c10
-rw-r--r--drivers/watchdog/mei_wdt.c58
-rw-r--r--include/linux/fpga/fpga-bridge.h60
-rw-r--r--include/linux/fpga/fpga-mgr.h29
-rw-r--r--include/linux/hyperv.h53
-rw-r--r--include/linux/mei_cl_bus.h51
-rw-r--r--include/linux/miscdevice.h7
-rw-r--r--include/linux/of.h25
-rw-r--r--include/linux/vme.h1
-rw-r--r--mm/memory.c1
-rw-r--r--mm/nommu.c1
-rwxr-xr-xscripts/checkkconfigsymbols.py2
-rw-r--r--tools/hv/Makefile3
-rw-r--r--tools/hv/hv_fcopy_daemon.c7
-rw-r--r--tools/hv/hv_kvp_daemon.c20
105 files changed, 5981 insertions, 696 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-fpga-bridge b/Documentation/ABI/testing/sysfs-class-fpga-bridge
new file mode 100644
index 000000000000..312ae2c579d8
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-fpga-bridge
@@ -0,0 +1,11 @@
+What: /sys/class/fpga_bridge/<bridge>/name
+Date: January 2016
+KernelVersion: 4.5
+Contact: Alan Tull <atull@opensource.altera.com>
+Description: Name of low level FPGA bridge driver.
+
+What: /sys/class/fpga_bridge/<bridge>/state
+Date: January 2016
+KernelVersion: 4.5
+Contact: Alan Tull <atull@opensource.altera.com>
+Description: Show bridge state as "enabled" or "disabled"
diff --git a/Documentation/ABI/testing/sysfs-class-mei b/Documentation/ABI/testing/sysfs-class-mei
index 80d9888a8ece..5096a82f4cde 100644
--- a/Documentation/ABI/testing/sysfs-class-mei
+++ b/Documentation/ABI/testing/sysfs-class-mei
@@ -29,3 +29,19 @@ Description: Display fw status registers content
Also number of registers varies between 1 and 6
depending on generation.
+What: /sys/class/mei/meiN/hbm_ver
+Date: Aug 2016
+KernelVersion: 4.9
+Contact: Tomas Winkler <tomas.winkler@intel.com>
+Description: Display the negotiated HBM protocol version.
+
+ The HBM protocol version negotiated
+ between the driver and the device.
+
+What: /sys/class/mei/meiN/hbm_ver_drv
+Date: Aug 2016
+KernelVersion: 4.9
+Contact: Tomas Winkler <tomas.winkler@intel.com>
+Description: Display the driver HBM protocol version.
+
+ The HBM protocol version supported by the driver.
diff --git a/Documentation/devicetree/bindings/display/ht16k33.txt b/Documentation/devicetree/bindings/display/ht16k33.txt
new file mode 100644
index 000000000000..8e5b30b87754
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/ht16k33.txt
@@ -0,0 +1,42 @@
+Holtek ht16k33 RAM mapping 16*8 LED controller driver with keyscan
+-------------------------------------------------------------------------------
+
+Required properties:
+- compatible: "holtek,ht16k33"
+- reg: I2C slave address of the chip.
+- interrupt-parent: A phandle pointing to the interrupt controller
+ serving the interrupt for this chip.
+- interrupts: Interrupt specification for the key pressed interrupt.
+- refresh-rate-hz: Display update interval in HZ.
+- debounce-delay-ms: Debouncing interval time in milliseconds.
+- linux,keymap: The keymap for keys as described in the binding
+ document (devicetree/bindings/input/matrix-keymap.txt).
+
+Optional properties:
+- linux,no-autorepeat: Disable keyrepeat.
+- default-brightness-level: Initial brightness level [0-15] (default: 15).
+
+Example:
+
+&i2c1 {
+ ht16k33: ht16k33@70 {
+ compatible = "holtek,ht16k33";
+ reg = <0x70>;
+ refresh-rate-hz = <20>;
+ debounce-delay-ms = <50>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
+ linux,keymap = <
+ MATRIX_KEY(2, 0, KEY_F6)
+ MATRIX_KEY(3, 0, KEY_F8)
+ MATRIX_KEY(4, 0, KEY_F10)
+ MATRIX_KEY(5, 0, KEY_F4)
+ MATRIX_KEY(6, 0, KEY_F2)
+ MATRIX_KEY(2, 1, KEY_F5)
+ MATRIX_KEY(3, 1, KEY_F7)
+ MATRIX_KEY(4, 1, KEY_F9)
+ MATRIX_KEY(5, 1, KEY_F3)
+ MATRIX_KEY(6, 1, KEY_F1)
+ >;
+ };
+};
diff --git a/Documentation/devicetree/bindings/fpga/fpga-region.txt b/Documentation/devicetree/bindings/fpga/fpga-region.txt
new file mode 100644
index 000000000000..3b32ba15a717
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/fpga-region.txt
@@ -0,0 +1,494 @@
+FPGA Region Device Tree Binding
+
+Alan Tull 2016
+
+ CONTENTS
+ - Introduction
+ - Terminology
+ - Sequence
+ - FPGA Region
+ - Supported Use Models
+ - Device Tree Examples
+ - Constraints
+
+
+Introduction
+============
+
+FPGA Regions represent FPGA's and partial reconfiguration regions of FPGA's in
+the Device Tree. FPGA Regions provide a way to program FPGAs under device tree
+control.
+
+This device tree binding document hits some of the high points of FPGA usage and
+attempts to include terminology used by both major FPGA manufacturers. This
+document isn't a replacement for any manufacturers specifications for FPGA
+usage.
+
+
+Terminology
+===========
+
+Full Reconfiguration
+ * The entire FPGA is programmed.
+
+Partial Reconfiguration (PR)
+ * A section of an FPGA is reprogrammed while the rest of the FPGA is not
+ affected.
+ * Not all FPGA's support PR.
+
+Partial Reconfiguration Region (PRR)
+ * Also called a "reconfigurable partition"
+ * A PRR is a specific section of a FPGA reserved for reconfiguration.
+ * A base (or static) FPGA image may create a set of PRR's that later may
+ be independently reprogrammed many times.
+ * The size and specific location of each PRR is fixed.
+ * The connections at the edge of each PRR are fixed. The image that is loaded
+ into a PRR must fit and must use a subset of the region's connections.
+ * The busses within the FPGA are split such that each region gets its own
+ branch that may be gated independently.
+
+Persona
+ * Also called a "partial bit stream"
+ * An FPGA image that is designed to be loaded into a PRR. There may be
+ any number of personas designed to fit into a PRR, but only one at at time
+ may be loaded.
+ * A persona may create more regions.
+
+FPGA Bridge
+ * FPGA Bridges gate bus signals between a host and FPGA.
+ * FPGA Bridges should be disabled while the FPGA is being programmed to
+ prevent spurious signals on the cpu bus and to the soft logic.
+ * FPGA bridges may be actual hardware or soft logic on an FPGA.
+ * During Full Reconfiguration, hardware bridges between the host and FPGA
+ will be disabled.
+ * During Partial Reconfiguration of a specific region, that region's bridge
+ will be used to gate the busses. Traffic to other regions is not affected.
+ * In some implementations, the FPGA Manager transparantly handles gating the
+ buses, eliminating the need to show the hardware FPGA bridges in the
+ device tree.
+ * An FPGA image may create a set of reprogrammable regions, each having its
+ own bridge and its own split of the busses in the FPGA.
+
+FPGA Manager
+ * An FPGA Manager is a hardware block that programs an FPGA under the control
+ of a host processor.
+
+Base Image
+ * Also called the "static image"
+ * An FPGA image that is designed to do full reconfiguration of the FPGA.
+ * A base image may set up a set of partial reconfiguration regions that may
+ later be reprogrammed.
+
+ ---------------- ----------------------------------
+ | Host CPU | | FPGA |
+ | | | |
+ | ----| | ----------- -------- |
+ | | H | | |==>| Bridge0 |<==>| PRR0 | |
+ | | W | | | ----------- -------- |
+ | | | | | |
+ | | B |<=====>|<==| ----------- -------- |
+ | | R | | |==>| Bridge1 |<==>| PRR1 | |
+ | | I | | | ----------- -------- |
+ | | D | | | |
+ | | G | | | ----------- -------- |
+ | | E | | |==>| Bridge2 |<==>| PRR2 | |
+ | ----| | ----------- -------- |
+ | | | |
+ ---------------- ----------------------------------
+
+Figure 1: An FPGA set up with a base image that created three regions. Each
+region (PRR0-2) gets its own split of the busses that is independently gated by
+a soft logic bridge (Bridge0-2) in the FPGA. The contents of each PRR can be
+reprogrammed independently while the rest of the system continues to function.
+
+
+Sequence
+========
+
+When a DT overlay that targets a FPGA Region is applied, the FPGA Region will
+do the following:
+
+ 1. Disable appropriate FPGA bridges.
+ 2. Program the FPGA using the FPGA manager.
+ 3. Enable the FPGA bridges.
+ 4. The Device Tree overlay is accepted into the live tree.
+ 5. Child devices are populated.
+
+When the overlay is removed, the child nodes will be removed and the FPGA Region
+will disable the bridges.
+
+
+FPGA Region
+===========
+
+FPGA Regions represent FPGA's and FPGA PR regions in the device tree. An FPGA
+Region brings together the elements needed to program on a running system and
+add the child devices:
+
+ * FPGA Manager
+ * FPGA Bridges
+ * image-specific information needed to to the programming.
+ * child nodes
+
+The intended use is that a Device Tree overlay (DTO) can be used to reprogram an
+FPGA while an operating system is running.
+
+An FPGA Region that exists in the live Device Tree reflects the current state.
+If the live tree shows a "firmware-name" property or child nodes under a FPGA
+Region, the FPGA already has been programmed. A DTO that targets a FPGA Region
+and adds the "firmware-name" property is taken as a request to reprogram the
+FPGA. After reprogramming is successful, the overlay is accepted into the live
+tree.
+
+The base FPGA Region in the device tree represents the FPGA and supports full
+reconfiguration. It must include a phandle to an FPGA Manager. The base
+FPGA region will be the child of one of the hardware bridges (the bridge that
+allows register access) between the cpu and the FPGA. If there are more than
+one bridge to control during FPGA programming, the region will also contain a
+list of phandles to the additional hardware FPGA Bridges.
+
+For partial reconfiguration (PR), each PR region will have an FPGA Region.
+These FPGA regions are children of FPGA bridges which are then children of the
+base FPGA region. The "Full Reconfiguration to add PRR's" example below shows
+this.
+
+If an FPGA Region does not specify a FPGA Manager, it will inherit the FPGA
+Manager specified by its ancestor FPGA Region. This supports both the case
+where the same FPGA Manager is used for all of a FPGA as well the case where
+a different FPGA Manager is used for each region.
+
+FPGA Regions do not inherit their ancestor FPGA regions' bridges. This prevents
+shutting down bridges that are upstream from the other active regions while one
+region is getting reconfigured (see Figure 1 above). During PR, the FPGA's
+hardware bridges remain enabled. The PR regions' bridges will be FPGA bridges
+within the static image of the FPGA.
+
+Required properties:
+- compatible : should contain "fpga-region"
+- fpga-mgr : should contain a phandle to an FPGA Manager. Child FPGA Regions
+ inherit this property from their ancestor regions. A fpga-mgr property
+ in a region will override any inherited FPGA manager.
+- #address-cells, #size-cells, ranges : must be present to handle address space
+ mapping for child nodes.
+
+Optional properties:
+- firmware-name : should contain the name of an FPGA image file located on the
+ firmware search path. If this property shows up in a live device tree
+ it indicates that the FPGA has already been programmed with this image.
+ If this property is in an overlay targeting a FPGA region, it is a
+ request to program the FPGA with that image.
+- fpga-bridges : should contain a list of phandles to FPGA Bridges that must be
+ controlled during FPGA programming along with the parent FPGA bridge.
+ This property is optional if the FPGA Manager handles the bridges.
+ If the fpga-region is the child of a fpga-bridge, the list should not
+ contain the parent bridge.
+- partial-fpga-config : boolean, set if partial reconfiguration is to be done,
+ otherwise full reconfiguration is done.
+- external-fpga-config : boolean, set if the FPGA has already been configured
+ prior to OS boot up.
+- region-unfreeze-timeout-us : The maximum time in microseconds to wait for
+ bridges to successfully become enabled after the region has been
+ programmed.
+- region-freeze-timeout-us : The maximum time in microseconds to wait for
+ bridges to successfully become disabled before the region has been
+ programmed.
+- child nodes : devices in the FPGA after programming.
+
+In the example below, when an overlay is applied targeting fpga-region0,
+fpga_mgr is used to program the FPGA. Two bridges are controlled during
+programming: the parent fpga_bridge0 and fpga_bridge1. Because the region is
+the child of fpga_bridge0, only fpga_bridge1 needs to be specified in the
+fpga-bridges property. During programming, these bridges are disabled, the
+firmware specified in the overlay is loaded to the FPGA using the FPGA manager
+specified in the region. If FPGA programming succeeds, the bridges are
+reenabled and the overlay makes it into the live device tree. The child devices
+are then populated. If FPGA programming fails, the bridges are left disabled
+and the overlay is rejected. The overlay's ranges property maps the lwhps
+bridge's region (0xff200000) and the hps bridge's region (0xc0000000) for use by
+the two child devices.
+
+Example:
+Base tree contains:
+
+ fpga_mgr: fpga-mgr@ff706000 {
+ compatible = "altr,socfpga-fpga-mgr";
+ reg = <0xff706000 0x1000
+ 0xffb90000 0x20>;
+ interrupts = <0 175 4>;
+ };
+
+ fpga_bridge0: fpga-bridge@ff400000 {
+ compatible = "altr,socfpga-lwhps2fpga-bridge";
+ reg = <0xff400000 0x100000>;
+ resets = <&rst LWHPS2FPGA_RESET>;
+ clocks = <&l4_main_clk>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ fpga_region0: fpga-region0 {
+ compatible = "fpga-region";
+ fpga-mgr = <&fpga_mgr>;
+ };
+ };
+
+ fpga_bridge1: fpga-bridge@ff500000 {
+ compatible = "altr,socfpga-hps2fpga-bridge";
+ reg = <0xff500000 0x10000>;
+ resets = <&rst HPS2FPGA_RESET>;
+ clocks = <&l4_main_clk>;
+ };
+
+Overlay contains:
+
+/dts-v1/ /plugin/;
+/ {
+ fragment@0 {
+ target = <&fpga_region0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ firmware-name = "soc_system.rbf";
+ fpga-bridges = <&fpga_bridge1>;
+ ranges = <0x20000 0xff200000 0x100000>,
+ <0x0 0xc0000000 0x20000000>;
+
+ gpio@10040 {
+ compatible = "altr,pio-1.0";
+ reg = <0x10040 0x20>;
+ altr,gpio-bank-width = <4>;
+ #gpio-cells = <2>;
+ clocks = <2>;
+ gpio-controller;
+ };
+
+ onchip-memory {
+ device_type = "memory";
+ compatible = "altr,onchipmem-15.1";
+ reg = <0x0 0x10000>;
+ };
+ };
+ };
+};
+
+
+Supported Use Models
+====================
+
+In all cases the live DT must have the FPGA Manager, FPGA Bridges (if any), and
+a FPGA Region. The target of the Device Tree Overlay is the FPGA Region. Some
+uses are specific to a FPGA device.
+
+ * No FPGA Bridges
+ In this case, the FPGA Manager which programs the FPGA also handles the
+ bridges behind the scenes. No FPGA Bridge devices are needed for full
+ reconfiguration.
+
+ * Full reconfiguration with hardware bridges
+ In this case, there are hardware bridges between the processor and FPGA that
+ need to be controlled during full reconfiguration. Before the overlay is
+ applied, the live DT must include the FPGA Manager, FPGA Bridges, and a
+ FPGA Region. The FPGA Region is the child of the bridge that allows
+ register access to the FPGA. Additional bridges may be listed in a
+ fpga-bridges property in the FPGA region or in the device tree overlay.
+
+ * Partial reconfiguration with bridges in the FPGA
+ In this case, the FPGA will have one or more PRR's that may be programmed
+ separately while the rest of the FPGA can remain active. To manage this,
+ bridges need to exist in the FPGA that can gate the buses going to each FPGA
+ region while the buses are enabled for other sections. Before any partial
+ reconfiguration can be done, a base FPGA image must be loaded which includes
+ PRR's with FPGA bridges. The device tree should have a FPGA region for each
+ PRR.
+
+Device Tree Examples
+====================
+
+The intention of this section is to give some simple examples, focusing on
+the placement of the elements detailed above, especially:
+ * FPGA Manager
+ * FPGA Bridges
+ * FPGA Region
+ * ranges
+ * target-path or target
+
+For the purposes of this section, I'm dividing the Device Tree into two parts,
+each with its own requirements. The two parts are:
+ * The live DT prior to the overlay being added
+ * The DT overlay
+
+The live Device Tree must contain an FPGA Region, an FPGA Manager, and any FPGA
+Bridges. The FPGA Region's "fpga-mgr" property specifies the manager by phandle
+to handle programming the FPGA. If the FPGA Region is the child of another FPGA
+Region, the parent's FPGA Manager is used. If FPGA Bridges need to be involved,
+they are specified in the FPGA Region by the "fpga-bridges" property. During
+FPGA programming, the FPGA Region will disable the bridges that are in its
+"fpga-bridges" list and will re-enable them after FPGA programming has
+succeeded.
+
+The Device Tree Overlay will contain:
+ * "target-path" or "target"
+ The insertion point where the the contents of the overlay will go into the
+ live tree. target-path is a full path, while target is a phandle.
+ * "ranges"
+ The address space mapping from processor to FPGA bus(ses).
+ * "firmware-name"
+ Specifies the name of the FPGA image file on the firmware search
+ path. The search path is described in the firmware class documentation.
+ * "partial-fpga-config"
+ This binding is a boolean and should be present if partial reconfiguration
+ is to be done.
+ * child nodes corresponding to hardware that will be loaded in this region of
+ the FPGA.
+
+Device Tree Example: Full Reconfiguration without Bridges
+=========================================================
+
+Live Device Tree contains:
+ fpga_mgr0: fpga-mgr@f8007000 {
+ compatible = "xlnx,zynq-devcfg-1.0";
+ reg = <0xf8007000 0x100>;
+ interrupt-parent = <&intc>;
+ interrupts = <0 8 4>;
+ clocks = <&clkc 12>;
+ clock-names = "ref_clk";
+ syscon = <&slcr>;
+ };
+
+ fpga_region0: fpga-region0 {
+ compatible = "fpga-region";
+ fpga-mgr = <&fpga_mgr0>;
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ ranges;
+ };
+
+DT Overlay contains:
+/dts-v1/ /plugin/;
+/ {
+fragment@0 {
+ target = <&fpga_region0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ firmware-name = "zynq-gpio.bin";
+
+ gpio1: gpio@40000000 {
+ compatible = "xlnx,xps-gpio-1.00.a";
+ reg = <0x40000000 0x10000>;
+ gpio-controller;
+ #gpio-cells = <0x2>;
+ xlnx,gpio-width= <0x6>;
+ };
+ };
+};
+
+Device Tree Example: Full Reconfiguration to add PRR's
+======================================================
+
+The base FPGA Region is specified similar to the first example above.
+
+This example programs the FPGA to have two regions that can later be partially
+configured. Each region has its own bridge in the FPGA fabric.
+
+DT Overlay contains:
+/dts-v1/ /plugin/;
+/ {
+ fragment@0 {
+ target = <&fpga_region0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ firmware-name = "base.rbf";
+
+ fpga-bridge@4400 {
+ compatible = "altr,freeze-bridge";
+ reg = <0x4400 0x10>;
+
+ fpga_region1: fpga-region1 {
+ compatible = "fpga-region";
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ ranges;
+ };
+ };
+
+ fpga-bridge@4420 {
+ compatible = "altr,freeze-bridge";
+ reg = <0x4420 0x10>;
+
+ fpga_region2: fpga-region2 {
+ compatible = "fpga-region";
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ ranges;
+ };
+ };
+ };
+ };
+};
+
+Device Tree Example: Partial Reconfiguration
+============================================
+
+This example reprograms one of the PRR's set up in the previous example.
+
+The sequence that occurs when this overlay is similar to the above, the only
+differences are that the FPGA is partially reconfigured due to the
+"partial-fpga-config" boolean and the only bridge that is controlled during
+programming is the FPGA based bridge of fpga_region1.
+
+/dts-v1/ /plugin/;
+/ {
+ fragment@0 {
+ target = <&fpga_region1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ firmware-name = "soc_image2.rbf";
+ partial-fpga-config;
+
+ gpio@10040 {
+ compatible = "altr,pio-1.0";
+ reg = <0x10040 0x20>;
+ clocks = <0x2>;
+ altr,gpio-bank-width = <0x4>;
+ resetvalue = <0x0>;
+ #gpio-cells = <0x2>;
+ gpio-controller;
+ };
+ };
+ };
+};
+
+Constraints
+===========
+
+It is beyond the scope of this document to fully describe all the FPGA design
+constraints required to make partial reconfiguration work[1] [2] [3], but a few
+deserve quick mention.
+
+A persona must have boundary connections that line up with those of the partion
+or region it is designed to go into.
+
+During programming, transactions through those connections must be stopped and
+the connections must be held at a fixed logic level. This can be achieved by
+FPGA Bridges that exist on the FPGA fabric prior to the partial reconfiguration.
+
+--
+[1] www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/ug/ug_partrecon.pdf
+[2] tspace.library.utoronto.ca/bitstream/1807/67932/1/Byma_Stuart_A_201411_MAS_thesis.pdf
+[3] http://www.xilinx.com/support/documentation/sw_manuals/xilinx14_1/ug702.pdf
diff --git a/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt b/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt
new file mode 100644
index 000000000000..6462e12d8de6
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt
@@ -0,0 +1,17 @@
+Broadcom OTP memory controller
+
+Required Properties:
+- compatible: "brcm,ocotp" for the first generation Broadcom OTPC which is used
+ in Cygnus and supports 32 bit read/write. Use "brcm,ocotp-v2" for the second
+ generation Broadcom OTPC which is used in SoC's such as Stingray and supports
+ 64-bit read/write.
+- reg: Base address of the OTP controller.
+- brcm,ocotp-size: Amount of memory available, in 32 bit words
+
+Example:
+
+otp: otp@0301c800 {
+ compatible = "brcm,ocotp";
+ reg = <0x0301c800 0x2c>;
+ brcm,ocotp-size = <2048>;
+};
diff --git a/Documentation/devicetree/bindings/nvmem/lpc1850-otp.txt b/Documentation/devicetree/bindings/nvmem/lpc1850-otp.txt
new file mode 100644
index 000000000000..853b6a754644
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/lpc1850-otp.txt
@@ -0,0 +1,20 @@
+* NXP LPC18xx OTP memory
+
+Internal OTP (One Time Programmable) memory for NXP LPC18xx/43xx devices.
+
+Required properties:
+ - compatible: Should be "nxp,lpc1850-otp"
+ - reg: Must contain an entry with the physical base address and length
+ for each entry in reg-names.
+ - address-cells: must be set to 1.
+ - size-cells: must be set to 1.
+
+See nvmem.txt for more information.
+
+Example:
+ otp: otp@40045000 {
+ compatible = "nxp,lpc1850-otp";
+ reg = <0x40045000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 56a257b7c4d7..98371753a08f 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -127,6 +127,7 @@ hitex Hitex Development Tools
holt Holt Integrated Circuits, Inc.
honeywell Honeywell
hp Hewlett Packard
+holtek Holtek Semiconductor, Inc.
i2se I2SE GmbH
ibm International Business Machines (IBM)
idt Integrated Device Technologies, Inc.
diff --git a/Documentation/fpga/fpga-mgr.txt b/Documentation/fpga/fpga-mgr.txt
index ce3e84fa9023..86ee5078fd03 100644
--- a/Documentation/fpga/fpga-mgr.txt
+++ b/Documentation/fpga/fpga-mgr.txt
@@ -18,31 +18,37 @@ API Functions:
To program the FPGA from a file or from a buffer:
-------------------------------------------------
- int fpga_mgr_buf_load(struct fpga_manager *mgr, u32 flags,
+ int fpga_mgr_buf_load(struct fpga_manager *mgr,
+ struct fpga_image_info *info,
const char *buf, size_t count);
Load the FPGA from an image which exists as a buffer in memory.
- int fpga_mgr_firmware_load(struct fpga_manager *mgr, u32 flags,
+ int fpga_mgr_firmware_load(struct fpga_manager *mgr,
+ struct fpga_image_info *info,
const char *image_name);
Load the FPGA from an image which exists as a file. The image file must be on
-the firmware search path (see the firmware class documentation).
-
-For both these functions, flags == 0 for normal full reconfiguration or
-FPGA_MGR_PARTIAL_RECONFIG for partial reconfiguration. If successful, the FPGA
-ends up in operating mode. Return 0 on success or a negative error code.
+the firmware search path (see the firmware class documentation). If successful,
+the FPGA ends up in operating mode. Return 0 on success or a negative error
+code.
+A FPGA design contained in a FPGA image file will likely have particulars that
+affect how the image is programmed to the FPGA. These are contained in struct
+fpga_image_info. Currently the only such particular is a single flag bit
+indicating whether the image is for full or partial reconfiguration.
To get/put a reference to a FPGA manager:
-----------------------------------------
struct fpga_manager *of_fpga_mgr_get(struct device_node *node);
+ struct fpga_manager *fpga_mgr_get(struct device *dev);
+
+Given a DT node or device, get an exclusive reference to a FPGA manager.
void fpga_mgr_put(struct fpga_manager *mgr);
-Given a DT node, get an exclusive reference to a FPGA manager or release
-the reference.
+Release the reference.
To register or unregister the low level FPGA-specific driver:
@@ -70,8 +76,11 @@ struct device_node *mgr_node = ...
char *buf = ...
int count = ...
+/* struct with information about the FPGA image to program. */
+struct fpga_image_info info;
+
/* flags indicates whether to do full or partial reconfiguration */
-int flags = 0;
+info.flags = 0;
int ret;
@@ -79,7 +88,7 @@ int ret;
struct fpga_manager *mgr = of_fpga_mgr_get(mgr_node);
/* Load the buffer to the FPGA */
-ret = fpga_mgr_buf_load(mgr, flags, buf, count);
+ret = fpga_mgr_buf_load(mgr, &info, buf, count);
/* Release the FPGA manager */
fpga_mgr_put(mgr);
@@ -96,8 +105,11 @@ struct device_node *mgr_node = ...
/* FPGA image is in this file which is in the firmware search path */
const char *path = "fpga-image-9.rbf"
+/* struct with information about the FPGA image to program. */
+struct fpga_image_info info;
+
/* flags indicates whether to do full or partial reconfiguration */
-int flags = 0;
+info.flags = 0;
int ret;
@@ -105,7 +117,7 @@ int ret;
struct fpga_manager *mgr = of_fpga_mgr_get(mgr_node);
/* Get the firmware image (path) and load it to the FPGA */
-ret = fpga_mgr_firmware_load(mgr, flags, path);
+ret = fpga_mgr_firmware_load(mgr, &info, path);
/* Release the FPGA manager */
fpga_mgr_put(mgr);
@@ -157,7 +169,10 @@ The programming sequence is:
2. .write (may be called once or multiple times)
3. .write_complete
-The .write_init function will prepare the FPGA to receive the image data.
+The .write_init function will prepare the FPGA to receive the image data. The
+buffer passed into .write_init will be atmost .initial_header_size bytes long,
+if the whole bitstream is not immediately available then the core code will
+buffer up at least this much before starting.
The .write function writes a buffer to the FPGA. The buffer may be contain the
whole FPGA image or may be a smaller chunk of an FPGA image. In the latter
diff --git a/Documentation/trace/intel_th.txt b/Documentation/trace/intel_th.txt
index f7fc5ba5df8d..f92070e7dde0 100644
--- a/Documentation/trace/intel_th.txt
+++ b/Documentation/trace/intel_th.txt
@@ -97,3 +97,25 @@ $ echo 0 > /sys/bus/intel_th/devices/0-msc0/active
# and now you can collect the trace from the device node:
$ cat /dev/intel_th0/msc0 > my_stp_trace
+
+Host Debugger Mode
+==================
+
+It is possible to configure the Trace Hub and control its trace
+capture from a remote debug host, which should be connected via one of
+the hardware debugging interfaces, which will then be used to both
+control Intel Trace Hub and transfer its trace data to the debug host.
+
+The driver needs to be told that such an arrangement is taking place
+so that it does not touch any capture/port configuration and avoids
+conflicting with the debug host's configuration accesses. The only
+activity that the driver will perform in this mode is collecting
+software traces to the Software Trace Hub (an stm class device). The
+user is still responsible for setting up adequate master/channel
+mappings that the decoder on the receiving end would recognize.
+
+In order to enable the host mode, set the 'host_mode' parameter of the
+'intel_th' kernel module to 'y'. None of the virtual output devices
+will show up on the intel_th bus. Also, trace configuration and
+capture controlling attribute groups of the 'gth' device will not be
+exposed. The 'sth' device will operate as usual.
diff --git a/Documentation/trace/stm.txt b/Documentation/trace/stm.txt
index ea035f9dbfd7..11cff47eecce 100644
--- a/Documentation/trace/stm.txt
+++ b/Documentation/trace/stm.txt
@@ -69,12 +69,43 @@ stm device's channel mmio region is 64 bytes and hardware page size is
width==64, you should be able to mmap() one page on this file
descriptor and obtain direct access to an mmio region for 64 channels.
+Examples of STM devices are Intel(R) Trace Hub [1] and Coresight STM
+[2].
+
+stm_source
+==========
+
For kernel-based trace sources, there is "stm_source" device
class. Devices of this class can be connected and disconnected to/from
-stm devices at runtime via a sysfs attribute.
+stm devices at runtime via a sysfs attribute called "stm_source_link"
+by writing the name of the desired stm device there, for example:
-Examples of STM devices are Intel(R) Trace Hub [1] and Coresight STM
-[2].
+$ echo dummy_stm.0 > /sys/class/stm_source/console/stm_source_link
+
+For examples on how to use stm_source interface in the kernel, refer
+to stm_console or stm_heartbeat drivers.
+
+Each stm_source device will need to assume a master and a range of
+channels, depending on how many channels it requires. These are
+allocated for the device according to the policy configuration. If
+there's a node in the root of the policy directory that matches the
+stm_source device's name (for example, "console"), this node will be
+used to allocate master and channel numbers. If there's no such policy
+node, the stm core will pick the first contiguous chunk of channels
+within the first available master. Note that the node must exist
+before the stm_source device is connected to its stm device.
+
+stm_console
+===========
+
+One implementation of this interface also used in the example above is
+the "stm_console" driver, which basically provides a one-way console
+for kernel messages over an stm device.
+
+To configure the master/channel pair that will be assigned to this
+console in the STP stream, create a "console" policy entry (see the
+beginning of this text on how to do that). When initialized, it will
+consume one channel.
[1] https://software.intel.com/sites/default/files/managed/d3/3c/intel-th-developer-manual.pdf
[2] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0444b/index.html
diff --git a/MAINTAINERS b/MAINTAINERS
index 116168194d0e..bbb445050b04 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3067,6 +3067,12 @@ F: drivers/usb/host/whci/
F: drivers/usb/wusbcore/
F: include/linux/usb/wusb*
+HT16K33 LED CONTROLLER DRIVER
+M: Robin van der Gracht <robin@protonic.nl>
+S: Maintained
+F: drivers/auxdisplay/ht16k33.c
+F: Documentation/devicetree/bindings/display/ht16k33.txt
+
CFAG12864B LCD DRIVER
M: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
W: http://miguelojeda.es/auxdisplay.htm
@@ -5043,7 +5049,9 @@ K: fmc_d.*register
FPGA MANAGER FRAMEWORK
M: Alan Tull <atull@opensource.altera.com>
R: Moritz Fischer <moritz.fischer@ettus.com>
+L: linux-fpga@vger.kernel.org
S: Maintained
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/atull/linux-fpga.git
F: drivers/fpga/
F: include/linux/fpga/fpga-mgr.h
W: http://www.rocketboards.org
@@ -5940,6 +5948,7 @@ F: drivers/input/serio/hyperv-keyboard.c
F: drivers/pci/host/pci-hyperv.c
F: drivers/net/hyperv/
F: drivers/scsi/storvsc_drv.c
+F: drivers/uio/uio_hv_generic.c
F: drivers/video/fbdev/hyperv_fb.c
F: include/linux/hyperv.h
F: tools/hv/
@@ -9231,7 +9240,7 @@ F: drivers/misc/panel.c
PARALLEL PORT SUBSYSTEM
M: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
-M: Sudip Mukherjee <sudip@vectorindia.org>
+M: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
L: linux-parport@lists.infradead.org (subscribers-only)
S: Maintained
F: drivers/parport/
@@ -10841,6 +10850,11 @@ W: http://www.sunplus.com
S: Supported
F: arch/score/
+SCR24X CHIP CARD INTERFACE DRIVER
+M: Lubomir Rintel <lkundrak@v3.sk>
+S: Supported
+F: drivers/char/pcmcia/scr24x_cs.c
+
SYSTEM CONTROL & POWER INTERFACE (SCPI) Message Protocol drivers
M: Sudeep Holla <sudeep.holla@arm.com>
L: linux-arm-kernel@lists.infradead.org
@@ -11244,7 +11258,7 @@ F: include/media/i2c/ov2659.h
SILICON MOTION SM712 FRAME BUFFER DRIVER
M: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
M: Teddy Wang <teddy.wang@siliconmotion.com>
-M: Sudip Mukherjee <sudip@vectorindia.org>
+M: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
L: linux-fbdev@vger.kernel.org
S: Maintained
F: drivers/video/fbdev/sm712*
@@ -11672,7 +11686,7 @@ F: drivers/staging/rtl8712/
STAGING - SILICON MOTION SM750 FRAME BUFFER DRIVER
M: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
M: Teddy Wang <teddy.wang@siliconmotion.com>
-M: Sudip Mukherjee <sudip@vectorindia.org>
+M: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
L: linux-fbdev@vger.kernel.org
S: Maintained
F: drivers/staging/sm750fb/
diff --git a/arch/blackfin/mach-bf561/coreb.c b/arch/blackfin/mach-bf561/coreb.c
index 8a2543c654b3..cf27554e76bf 100644
--- a/arch/blackfin/mach-bf561/coreb.c
+++ b/arch/blackfin/mach-bf561/coreb.c
@@ -1,5 +1,7 @@
/* Load firmware into Core B on a BF561
*
+ * Author: Bas Vermeulen <bvermeul@blackstar.xs4all.nl>
+ *
* Copyright 2004-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
@@ -14,9 +16,9 @@
#include <linux/device.h>
#include <linux/fs.h>
+#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/miscdevice.h>
-#include <linux/module.h>
#define CMD_COREB_START _IO('b', 0)
#define CMD_COREB_STOP _IO('b', 1)
@@ -59,8 +61,4 @@ static struct miscdevice coreb_dev = {
.name = "coreb",
.fops = &coreb_fops,
};
-module_misc_device(coreb_dev);
-
-MODULE_AUTHOR("Bas Vermeulen <bvermeul@blackstar.xs4all.nl>");
-MODULE_DESCRIPTION("BF561 Core B Support");
-MODULE_LICENSE("GPL");
+builtin_misc_device(coreb_dev);
diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig
index 10e1b9eee10e..4ef4c5caed4f 100644
--- a/drivers/auxdisplay/Kconfig
+++ b/drivers/auxdisplay/Kconfig
@@ -128,4 +128,17 @@ config IMG_ASCII_LCD
development boards such as the MIPS Boston, MIPS Malta & MIPS SEAD3
from Imagination Technologies.
+config HT16K33
+ tristate "Holtek Ht16K33 LED controller with keyscan"
+ depends on FB && OF && I2C && INPUT
+ select FB_SYS_FOPS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select INPUT_MATRIXKMAP
+ select FB_BACKLIGHT
+ help
+ Say yes here to add support for Holtek HT16K33, RAM mapping 16*8
+ LED controller driver with keyscan.
+
endif # AUXDISPLAY
diff --git a/drivers/auxdisplay/Makefile b/drivers/auxdisplay/Makefile
index 3127175c89df..cb3dd847713b 100644
--- a/drivers/auxdisplay/Makefile
+++ b/drivers/auxdisplay/Makefile
@@ -5,3 +5,4 @@
obj-$(CONFIG_KS0108) += ks0108.o
obj-$(CONFIG_CFAG12864B) += cfag12864b.o cfag12864bfb.o
obj-$(CONFIG_IMG_ASCII_LCD) += img-ascii-lcd.o
+obj-$(CONFIG_HT16K33) += ht16k33.o
diff --git a/drivers/auxdisplay/ht16k33.c b/drivers/auxdisplay/ht16k33.c
new file mode 100644
index 000000000000..eeb323f56c07
--- /dev/null
+++ b/drivers/auxdisplay/ht16k33.c
@@ -0,0 +1,563 @@
+/*
+ * HT16K33 driver
+ *
+ * Author: Robin van der Gracht <robin@protonic.nl>
+ *
+ * Copyright: (C) 2016 Protonic Holland.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/of.h>
+#include <linux/fb.h>
+#include <linux/slab.h>
+#include <linux/backlight.h>
+#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/workqueue.h>
+#include <linux/mm.h>
+
+/* Registers */
+#define REG_SYSTEM_SETUP 0x20
+#define REG_SYSTEM_SETUP_OSC_ON BIT(0)
+
+#define REG_DISPLAY_SETUP 0x80
+#define REG_DISPLAY_SETUP_ON BIT(0)
+
+#define REG_ROWINT_SET 0xA0
+#define REG_ROWINT_SET_INT_EN BIT(0)
+#define REG_ROWINT_SET_INT_ACT_HIGH BIT(1)
+
+#define REG_BRIGHTNESS 0xE0
+
+/* Defines */
+#define DRIVER_NAME "ht16k33"
+
+#define MIN_BRIGHTNESS 0x1
+#define MAX_BRIGHTNESS 0x10
+
+#define HT16K33_MATRIX_LED_MAX_COLS 8
+#define HT16K33_MATRIX_LED_MAX_ROWS 16
+#define HT16K33_MATRIX_KEYPAD_MAX_COLS 3
+#define HT16K33_MATRIX_KEYPAD_MAX_ROWS 12
+
+#define BYTES_PER_ROW (HT16K33_MATRIX_LED_MAX_ROWS / 8)
+#define HT16K33_FB_SIZE (HT16K33_MATRIX_LED_MAX_COLS * BYTES_PER_ROW)
+
+struct ht16k33_keypad {
+ struct input_dev *dev;
+ spinlock_t lock;
+ struct delayed_work work;
+ uint32_t cols;
+ uint32_t rows;
+ uint32_t row_shift;
+ uint32_t debounce_ms;
+ uint16_t last_key_state[HT16K33_MATRIX_KEYPAD_MAX_COLS];
+};
+
+struct ht16k33_fbdev {
+ struct fb_info *info;
+ uint32_t refresh_rate;
+ uint8_t *buffer;
+ uint8_t *cache;
+ struct delayed_work work;
+};
+
+struct ht16k33_priv {
+ struct i2c_client *client;
+ struct ht16k33_keypad keypad;
+ struct ht16k33_fbdev fbdev;
+ struct workqueue_struct *workqueue;
+};
+
+static struct fb_fix_screeninfo ht16k33_fb_fix = {
+ .id = DRIVER_NAME,
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_MONO10,
+ .xpanstep = 0,
+ .ypanstep = 0,
+ .ywrapstep = 0,
+ .line_length = HT16K33_MATRIX_LED_MAX_ROWS,
+ .accel = FB_ACCEL_NONE,
+};
+
+static struct fb_var_screeninfo ht16k33_fb_var = {
+ .xres = HT16K33_MATRIX_LED_MAX_ROWS,
+ .yres = HT16K33_MATRIX_LED_MAX_COLS,
+ .xres_virtual = HT16K33_MATRIX_LED_MAX_ROWS,
+ .yres_virtual = HT16K33_MATRIX_LED_MAX_COLS,
+ .bits_per_pixel = 1,
+ .red = { 0, 1, 0 },
+ .green = { 0, 1, 0 },
+ .blue = { 0, 1, 0 },
+ .left_margin = 0,
+ .right_margin = 0,
+ .upper_margin = 0,
+ .lower_margin = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+};
+
+static int ht16k33_display_on(struct ht16k33_priv *priv)
+{
+ uint8_t data = REG_DISPLAY_SETUP | REG_DISPLAY_SETUP_ON;
+
+ return i2c_smbus_write_byte(priv->client, data);
+}
+
+static int ht16k33_display_off(struct ht16k33_priv *priv)
+{
+ return i2c_smbus_write_byte(priv->client, REG_DISPLAY_SETUP);
+}
+
+static void ht16k33_fb_queue(struct ht16k33_priv *priv)
+{
+ struct ht16k33_fbdev *fbdev = &priv->fbdev;
+
+ queue_delayed_work(priv->workqueue, &fbdev->work,
+ msecs_to_jiffies(HZ / fbdev->refresh_rate));
+}
+
+static void ht16k33_keypad_queue(struct ht16k33_priv *priv)
+{
+ struct ht16k33_keypad *keypad = &priv->keypad;
+
+ queue_delayed_work(priv->workqueue, &keypad->work,
+ msecs_to_jiffies(keypad->debounce_ms));
+}
+
+/*
+ * This gets the fb data from cache and copies it to ht16k33 display RAM
+ */
+static void ht16k33_fb_update(struct work_struct *work)
+{
+ struct ht16k33_fbdev *fbdev =
+ container_of(work, struct ht16k33_fbdev, work.work);
+ struct ht16k33_priv *priv =
+ container_of(fbdev, struct ht16k33_priv, fbdev);
+
+ uint8_t *p1, *p2;
+ int len, pos = 0, first = -1;
+
+ p1 = fbdev->cache;
+ p2 = fbdev->buffer;
+
+ /* Search for the first byte with changes */
+ while (pos < HT16K33_FB_SIZE && first < 0) {
+ if (*(p1++) - *(p2++))
+ first = pos;
+ pos++;
+ }
+
+ /* No changes found */
+ if (first < 0)
+ goto requeue;
+
+ len = HT16K33_FB_SIZE - first;
+ p1 = fbdev->cache + HT16K33_FB_SIZE - 1;
+ p2 = fbdev->buffer + HT16K33_FB_SIZE - 1;
+
+ /* Determine i2c transfer length */
+ while (len > 1) {
+ if (*(p1--) - *(p2--))
+ break;
+ len--;
+ }
+
+ p1 = fbdev->cache + first;
+ p2 = fbdev->buffer + first;
+ if (!i2c_smbus_write_i2c_block_data(priv->client, first, len, p2))
+ memcpy(p1, p2, len);
+requeue:
+ ht16k33_fb_queue(priv);
+}
+
+static int ht16k33_keypad_start(struct input_dev *dev)
+{
+ struct ht16k33_priv *priv = input_get_drvdata(dev);
+ struct ht16k33_keypad *keypad = &priv->keypad;
+
+ /*
+ * Schedule an immediate key scan to capture current key state;
+ * columns will be activated and IRQs be enabled after the scan.
+ */
+ queue_delayed_work(priv->workqueue, &keypad->work, 0);
+ return 0;
+}
+
+static void ht16k33_keypad_stop(struct input_dev *dev)
+{
+ struct ht16k33_priv *priv = input_get_drvdata(dev);
+ struct ht16k33_keypad *keypad = &priv->keypad;
+
+ cancel_delayed_work(&keypad->work);
+ /*
+ * ht16k33_keypad_scan() will leave IRQs enabled;
+ * we should disable them now.
+ */
+ disable_irq_nosync(priv->client->irq);
+}
+
+static int ht16k33_initialize(struct ht16k33_priv *priv)
+{
+ uint8_t byte;
+ int err;
+ uint8_t data[HT16K33_MATRIX_LED_MAX_COLS * 2];
+
+ /* Clear RAM (8 * 16 bits) */
+ memset(data, 0, sizeof(data));
+ err = i2c_smbus_write_block_data(priv->client, 0, sizeof(data), data);
+ if (err)
+ return err;
+
+ /* Turn on internal oscillator */
+ byte = REG_SYSTEM_SETUP_OSC_ON | REG_SYSTEM_SETUP;
+ err = i2c_smbus_write_byte(priv->client, byte);
+ if (err)
+ return err;
+
+ /* Configure INT pin */
+ byte = REG_ROWINT_SET | REG_ROWINT_SET_INT_ACT_HIGH;
+ if (priv->client->irq > 0)
+ byte |= REG_ROWINT_SET_INT_EN;
+ return i2c_smbus_write_byte(priv->client, byte);
+}
+
+/*
+ * This gets the keys from keypad and reports it to input subsystem
+ */
+static void ht16k33_keypad_scan(struct work_struct *work)
+{
+ struct ht16k33_keypad *keypad =
+ container_of(work, struct ht16k33_keypad, work.work);
+ struct ht16k33_priv *priv =
+ container_of(keypad, struct ht16k33_priv, keypad);
+ const unsigned short *keycodes = keypad->dev->keycode;
+ uint16_t bits_changed, new_state[HT16K33_MATRIX_KEYPAD_MAX_COLS];
+ uint8_t data[HT16K33_MATRIX_KEYPAD_MAX_COLS * 2];
+ int row, col, code;
+ bool reschedule = false;
+
+ if (i2c_smbus_read_i2c_block_data(priv->client, 0x40, 6, data) != 6) {
+ dev_err(&priv->client->dev, "Failed to read key data\n");
+ goto end;
+ }
+
+ for (col = 0; col < keypad->cols; col++) {
+ new_state[col] = (data[col * 2 + 1] << 8) | data[col * 2];
+ if (new_state[col])
+ reschedule = true;
+ bits_changed = keypad->last_key_state[col] ^ new_state[col];
+
+ while (bits_changed) {
+ row = ffs(bits_changed) - 1;
+ code = MATRIX_SCAN_CODE(row, col, keypad->row_shift);
+ input_event(keypad->dev, EV_MSC, MSC_SCAN, code);
+ input_report_key(keypad->dev, keycodes[code],
+ new_state[col] & BIT(row));
+ bits_changed &= ~BIT(row);
+ }
+ }
+ input_sync(keypad->dev);
+ memcpy(keypad->last_key_state, new_state, sizeof(new_state));
+
+end:
+ if (reschedule)
+ ht16k33_keypad_queue(priv);
+ else
+ enable_irq(priv->client->irq);
+}
+
+static irqreturn_t ht16k33_irq_thread(int irq, void *dev)
+{
+ struct ht16k33_priv *priv = dev;
+
+ disable_irq_nosync(priv->client->irq);
+ ht16k33_keypad_queue(priv);
+
+ return IRQ_HANDLED;
+}
+
+static int ht16k33_bl_update_status(struct backlight_device *bl)
+{
+ int brightness = bl->props.brightness;
+ struct ht16k33_priv *priv = bl_get_data(bl);
+
+ if (bl->props.power != FB_BLANK_UNBLANK ||
+ bl->props.fb_blank != FB_BLANK_UNBLANK ||
+ bl->props.state & BL_CORE_FBBLANK || brightness == 0) {
+ return ht16k33_display_off(priv);
+ }
+
+ ht16k33_display_on(priv);
+ return i2c_smbus_write_byte(priv->client,
+ REG_BRIGHTNESS | (brightness - 1));
+}
+
+static int ht16k33_bl_check_fb(struct backlight_device *bl, struct fb_info *fi)
+{
+ struct ht16k33_priv *priv = bl_get_data(bl);
+
+ return (fi == NULL) || (fi->par == priv);
+}
+
+static const struct backlight_ops ht16k33_bl_ops = {
+ .update_status = ht16k33_bl_update_status,
+ .check_fb = ht16k33_bl_check_fb,
+};
+
+static int ht16k33_mmap(struct fb_info *info, struct vm_area_struct *vma)
+{
+ struct ht16k33_priv *priv = info->par;
+
+ return vm_insert_page(vma, vma->vm_start,
+ virt_to_page(priv->fbdev.buffer));
+}
+
+static struct fb_ops ht16k33_fb_ops = {
+ .owner = THIS_MODULE,
+ .fb_read = fb_sys_read,
+ .fb_write = fb_sys_write,
+ .fb_fillrect = sys_fillrect,
+ .fb_copyarea = sys_copyarea,
+ .fb_imageblit = sys_imageblit,
+ .fb_mmap = ht16k33_mmap,
+};
+
+static int ht16k33_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int err;
+ uint32_t rows, cols, dft_brightness;
+ struct backlight_device *bl;
+ struct backlight_properties bl_props;
+ struct ht16k33_priv *priv;
+ struct ht16k33_keypad *keypad;
+ struct ht16k33_fbdev *fbdev;
+ struct device_node *node = client->dev.of_node;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ dev_err(&client->dev, "i2c_check_functionality error\n");
+ return -EIO;
+ }
+
+ if (client->irq <= 0) {
+ dev_err(&client->dev, "No IRQ specified\n");
+ return -EINVAL;
+ }
+
+ priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->client = client;
+ i2c_set_clientdata(client, priv);
+ fbdev = &priv->fbdev;
+ keypad = &priv->keypad;
+
+ priv->workqueue = create_singlethread_workqueue(DRIVER_NAME "-wq");
+ if (priv->workqueue == NULL)
+ return -ENOMEM;
+
+ err = ht16k33_initialize(priv);
+ if (err)
+ goto err_destroy_wq;
+
+ /* Framebuffer (2 bytes per column) */
+ BUILD_BUG_ON(PAGE_SIZE < HT16K33_FB_SIZE);
+ fbdev->buffer = (unsigned char *) get_zeroed_page(GFP_KERNEL);
+ if (!fbdev->buffer) {
+ err = -ENOMEM;
+ goto err_free_fbdev;
+ }
+
+ fbdev->cache = devm_kmalloc(&client->dev, HT16K33_FB_SIZE, GFP_KERNEL);
+ if (!fbdev->cache) {
+ err = -ENOMEM;
+ goto err_fbdev_buffer;
+ }
+
+ fbdev->info = framebuffer_alloc(0, &client->dev);
+ if (!fbdev->info) {
+ err = -ENOMEM;
+ goto err_fbdev_buffer;
+ }
+
+ err = of_property_read_u32(node, "refresh-rate-hz",
+ &fbdev->refresh_rate);
+ if (err) {
+ dev_err(&client->dev, "refresh rate not specified\n");
+ goto err_fbdev_info;
+ }
+ fb_bl_default_curve(fbdev->info, 0, MIN_BRIGHTNESS, MAX_BRIGHTNESS);
+
+ INIT_DELAYED_WORK(&fbdev->work, ht16k33_fb_update);
+ fbdev->info->fbops = &ht16k33_fb_ops;
+ fbdev->info->screen_base = (char __iomem *) fbdev->buffer;
+ fbdev->info->screen_size = HT16K33_FB_SIZE;
+ fbdev->info->fix = ht16k33_fb_fix;
+ fbdev->info->var = ht16k33_fb_var;
+ fbdev->info->pseudo_palette = NULL;
+ fbdev->info->flags = FBINFO_FLAG_DEFAULT;
+ fbdev->info->par = priv;
+
+ err = register_framebuffer(fbdev->info);
+ if (err)
+ goto err_fbdev_info;
+
+ /* Keypad */
+ keypad->dev = devm_input_allocate_device(&client->dev);
+ if (!keypad->dev) {
+ err = -ENOMEM;
+ goto err_fbdev_unregister;
+ }
+
+ keypad->dev->name = DRIVER_NAME"-keypad";
+ keypad->dev->id.bustype = BUS_I2C;
+ keypad->dev->open = ht16k33_keypad_start;
+ keypad->dev->close = ht16k33_keypad_stop;
+
+ if (!of_get_property(node, "linux,no-autorepeat", NULL))
+ __set_bit(EV_REP, keypad->dev->evbit);
+
+ err = of_property_read_u32(node, "debounce-delay-ms",
+ &keypad->debounce_ms);
+ if (err) {
+ dev_err(&client->dev, "key debounce delay not specified\n");
+ goto err_fbdev_unregister;
+ }
+
+ err = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+ ht16k33_irq_thread,
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ DRIVER_NAME, priv);
+ if (err) {
+ dev_err(&client->dev, "irq request failed %d, error %d\n",
+ client->irq, err);
+ goto err_fbdev_unregister;
+ }
+
+ disable_irq_nosync(client->irq);
+ rows = HT16K33_MATRIX_KEYPAD_MAX_ROWS;
+ cols = HT16K33_MATRIX_KEYPAD_MAX_COLS;
+ err = matrix_keypad_parse_of_params(&client->dev, &rows, &cols);
+ if (err)
+ goto err_fbdev_unregister;
+
+ err = matrix_keypad_build_keymap(NULL, NULL, rows, cols, NULL,
+ keypad->dev);
+ if (err) {
+ dev_err(&client->dev, "failed to build keymap\n");
+ goto err_fbdev_unregister;
+ }
+
+ input_set_drvdata(keypad->dev, priv);
+ keypad->rows = rows;
+ keypad->cols = cols;
+ keypad->row_shift = get_count_order(cols);
+ INIT_DELAYED_WORK(&keypad->work, ht16k33_keypad_scan);
+
+ err = input_register_device(keypad->dev);
+ if (err)
+ goto err_fbdev_unregister;
+
+ /* Backlight */
+ memset(&bl_props, 0, sizeof(struct backlight_properties));
+ bl_props.type = BACKLIGHT_RAW;
+ bl_props.max_brightness = MAX_BRIGHTNESS;
+
+ bl = devm_backlight_device_register(&client->dev, DRIVER_NAME"-bl",
+ &client->dev, priv,
+ &ht16k33_bl_ops, &bl_props);
+ if (IS_ERR(bl)) {
+ dev_err(&client->dev, "failed to register backlight\n");
+ err = PTR_ERR(bl);
+ goto err_keypad_unregister;
+ }
+
+ err = of_property_read_u32(node, "default-brightness-level",
+ &dft_brightness);
+ if (err) {
+ dft_brightness = MAX_BRIGHTNESS;
+ } else if (dft_brightness > MAX_BRIGHTNESS) {
+ dev_warn(&client->dev,
+ "invalid default brightness level: %u, using %u\n",
+ dft_brightness, MAX_BRIGHTNESS);
+ dft_brightness = MAX_BRIGHTNESS;
+ }
+
+ bl->props.brightness = dft_brightness;
+ ht16k33_bl_update_status(bl);
+
+ ht16k33_fb_queue(priv);
+ return 0;
+
+err_keypad_unregister:
+ input_unregister_device(keypad->dev);
+err_fbdev_unregister:
+ unregister_framebuffer(fbdev->info);
+err_fbdev_info:
+ framebuffer_release(fbdev->info);
+err_fbdev_buffer:
+ free_page((unsigned long) fbdev->buffer);
+err_free_fbdev:
+ kfree(fbdev);
+err_destroy_wq:
+ destroy_workqueue(priv->workqueue);
+
+ return err;
+}
+
+static int ht16k33_remove(struct i2c_client *client)
+{
+ struct ht16k33_priv *priv = i2c_get_clientdata(client);
+ struct ht16k33_keypad *keypad = &priv->keypad;
+ struct ht16k33_fbdev *fbdev = &priv->fbdev;
+
+ ht16k33_keypad_stop(keypad->dev);
+
+ cancel_delayed_work(&fbdev->work);
+ unregister_framebuffer(fbdev->info);
+ framebuffer_release(fbdev->info);
+ free_page((unsigned long) fbdev->buffer);
+
+ destroy_workqueue(priv->workqueue);
+ return 0;
+}
+
+static const struct i2c_device_id ht16k33_i2c_match[] = {
+ { "ht16k33", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ht16k33_i2c_match);
+
+static const struct of_device_id ht16k33_of_match[] = {
+ { .compatible = "holtek,ht16k33", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ht16k33_of_match);
+
+static struct i2c_driver ht16k33_driver = {
+ .probe = ht16k33_probe,
+ .remove = ht16k33_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ .of_match_table = of_match_ptr(ht16k33_of_match),
+ },
+ .id_table = ht16k33_i2c_match,
+};
+module_i2c_driver(ht16k33_driver);
+
+MODULE_DESCRIPTION("Holtek HT16K33 driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Robin van der Gracht <robin@protonic.nl>");
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 45ba878ae025..fde005ef9d36 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -17,7 +17,6 @@ config DEVMEM
config DEVKMEM
bool "/dev/kmem virtual device support"
- default y
help
Say Y here if you want to support the /dev/kmem device. The
/dev/kmem device is rarely used, but can be used for certain
@@ -579,7 +578,7 @@ config DEVPORT
source "drivers/s390/char/Kconfig"
config TILE_SROM
- bool "Character-device access via hypervisor to the Tilera SPI ROM"
+ tristate "Character-device access via hypervisor to the Tilera SPI ROM"
depends on TILE
default y
---help---
diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig
index 8d3dfb0c8a26..1d1e7da8ad27 100644
--- a/drivers/char/pcmcia/Kconfig
+++ b/drivers/char/pcmcia/Kconfig
@@ -43,6 +43,17 @@ config CARDMAN_4040
(http://www.omnikey.com/), or a current development version of OpenCT
(http://www.opensc-project.org/opensc).
+config SCR24X
+ tristate "SCR24x Chip Card Interface support"
+ depends on PCMCIA
+ help
+ Enable support for the SCR24x PCMCIA Chip Card Interface.
+
+ To compile this driver as a module, choose M here.
+ The module will be called scr24x_cs..
+
+ If unsure say N.
+
config IPWIRELESS
tristate "IPWireless 3G UMTS PCMCIA card support"
depends on PCMCIA && NETDEVICES && TTY
diff --git a/drivers/char/pcmcia/Makefile b/drivers/char/pcmcia/Makefile
index 0aae20985d57..5b836bc21406 100644
--- a/drivers/char/pcmcia/Makefile
+++ b/drivers/char/pcmcia/Makefile
@@ -7,3 +7,4 @@
obj-$(CONFIG_SYNCLINK_CS) += synclink_cs.o
obj-$(CONFIG_CARDMAN_4000) += cm4000_cs.o
obj-$(CONFIG_CARDMAN_4040) += cm4040_cs.o
+obj-$(CONFIG_SCR24X) += scr24x_cs.o
diff --git a/drivers/char/pcmcia/scr24x_cs.c b/drivers/char/pcmcia/scr24x_cs.c
new file mode 100644
index 000000000000..f6b43d9350f0
--- /dev/null
+++ b/drivers/char/pcmcia/scr24x_cs.c
@@ -0,0 +1,373 @@
+/*
+ * SCR24x PCMCIA Smart Card Reader Driver
+ *
+ * Copyright (C) 2005-2006 TL Sudheendran
+ * Copyright (C) 2016 Lubomir Rintel
+ *
+ * Derived from "scr24x_v4.2.6_Release.tar.gz" driver by TL Sudheendran.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/cdev.h>
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ds.h>
+
+#define CCID_HEADER_SIZE 10
+#define CCID_LENGTH_OFFSET 1
+#define CCID_MAX_LEN 271
+
+#define SCR24X_DATA(n) (1 + n)
+#define SCR24X_CMD_STATUS 7
+#define CMD_START 0x40
+#define CMD_WRITE_BYTE 0x41
+#define CMD_READ_BYTE 0x42
+#define STATUS_BUSY 0x80
+
+struct scr24x_dev {
+ struct device *dev;
+ struct cdev c_dev;
+ unsigned char buf[CCID_MAX_LEN];
+ int devno;
+ struct mutex lock;
+ struct kref refcnt;
+ u8 __iomem *regs;
+};
+
+#define SCR24X_DEVS 8
+static DECLARE_BITMAP(scr24x_minors, SCR24X_DEVS);
+
+static struct class *scr24x_class;
+static dev_t scr24x_devt;
+
+static void scr24x_delete(struct kref *kref)
+{
+ struct scr24x_dev *dev = container_of(kref, struct scr24x_dev,
+ refcnt);
+
+ kfree(dev);
+}
+
+static int scr24x_wait_ready(struct scr24x_dev *dev)
+{
+ u_char status;
+ int timeout = 100;
+
+ do {
+ status = ioread8(dev->regs + SCR24X_CMD_STATUS);
+ if (!(status & STATUS_BUSY))
+ return 0;
+
+ msleep(20);
+ } while (--timeout);
+
+ return -EIO;
+}
+
+static int scr24x_open(struct inode *inode, struct file *filp)
+{
+ struct scr24x_dev *dev = container_of(inode->i_cdev,
+ struct scr24x_dev, c_dev);
+
+ kref_get(&dev->refcnt);
+ filp->private_data = dev;
+
+ return nonseekable_open(inode, filp);
+}
+
+static int scr24x_release(struct inode *inode, struct file *filp)
+{
+ struct scr24x_dev *dev = filp->private_data;
+
+ /* We must not take the dev->lock here as scr24x_delete()
+ * might be called to remove the dev structure altogether.
+ * We don't need the lock anyway, since after the reference
+ * acquired in probe() is released in remove() the chrdev
+ * is already unregistered and noone can possibly acquire
+ * a reference via open() anymore. */
+ kref_put(&dev->refcnt, scr24x_delete);
+ return 0;
+}
+
+static int read_chunk(struct scr24x_dev *dev, size_t offset, size_t limit)
+{
+ size_t i, y;
+ int ret;
+
+ for (i = offset; i < limit; i += 5) {
+ iowrite8(CMD_READ_BYTE, dev->regs + SCR24X_CMD_STATUS);
+ ret = scr24x_wait_ready(dev);
+ if (ret < 0)
+ return ret;
+
+ for (y = 0; y < 5 && i + y < limit; y++)
+ dev->buf[i + y] = ioread8(dev->regs + SCR24X_DATA(y));
+ }
+
+ return 0;
+}
+
+static ssize_t scr24x_read(struct file *filp, char __user *buf, size_t count,
+ loff_t *ppos)
+{
+ struct scr24x_dev *dev = filp->private_data;
+ int ret;
+ int len;
+
+ if (count < CCID_HEADER_SIZE)
+ return -EINVAL;
+
+ if (mutex_lock_interruptible(&dev->lock))
+ return -ERESTARTSYS;
+
+ if (!dev->dev) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ ret = scr24x_wait_ready(dev);
+ if (ret < 0)
+ goto out;
+ len = CCID_HEADER_SIZE;
+ ret = read_chunk(dev, 0, len);
+ if (ret < 0)
+ goto out;
+
+ len += le32_to_cpu(*(__le32 *)(&dev->buf[CCID_LENGTH_OFFSET]));
+ if (len > sizeof(dev->buf)) {
+ ret = -EIO;
+ goto out;
+ }
+ ret = read_chunk(dev, CCID_HEADER_SIZE, len);
+ if (ret < 0)
+ goto out;
+
+ if (len < count)
+ count = len;
+
+ if (copy_to_user(buf, dev->buf, count)) {
+ ret = -EFAULT;
+ goto out;
+ }
+
+ ret = count;
+out:
+ mutex_unlock(&dev->lock);
+ return ret;
+}
+
+static ssize_t scr24x_write(struct file *filp, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct scr24x_dev *dev = filp->private_data;
+ size_t i, y;
+ int ret;
+
+ if (mutex_lock_interruptible(&dev->lock))
+ return -ERESTARTSYS;
+
+ if (!dev->dev) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ if (count > sizeof(dev->buf)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (copy_from_user(dev->buf, buf, count)) {
+ ret = -EFAULT;
+ goto out;
+ }
+
+ ret = scr24x_wait_ready(dev);
+ if (ret < 0)
+ goto out;
+
+ iowrite8(CMD_START, dev->regs + SCR24X_CMD_STATUS);
+ ret = scr24x_wait_ready(dev);
+ if (ret < 0)
+ goto out;
+
+ for (i = 0; i < count; i += 5) {
+ for (y = 0; y < 5 && i + y < count; y++)
+ iowrite8(dev->buf[i + y], dev->regs + SCR24X_DATA(y));
+
+ iowrite8(CMD_WRITE_BYTE, dev->regs + SCR24X_CMD_STATUS);
+ ret = scr24x_wait_ready(dev);
+ if (ret < 0)
+ goto out;
+ }
+
+ ret = count;
+out:
+ mutex_unlock(&dev->lock);
+ return ret;
+}
+
+static const struct file_operations scr24x_fops = {
+ .owner = THIS_MODULE,
+ .read = scr24x_read,
+ .write = scr24x_write,
+ .open = scr24x_open,
+ .release = scr24x_release,
+ .llseek = no_llseek,
+};
+
+static int scr24x_config_check(struct pcmcia_device *link, void *priv_data)
+{
+ if (resource_size(link->resource[PCMCIA_IOPORT_0]) != 0x11)
+ return -ENODEV;
+ return pcmcia_request_io(link);
+}
+
+static int scr24x_probe(struct pcmcia_device *link)
+{
+ struct scr24x_dev *dev;
+ int ret;
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+
+ dev->devno = find_first_zero_bit(scr24x_minors, SCR24X_DEVS);
+ if (dev->devno >= SCR24X_DEVS) {
+ ret = -EBUSY;
+ goto err;
+ }
+
+ mutex_init(&dev->lock);
+ kref_init(&dev->refcnt);
+
+ link->priv = dev;
+ link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
+
+ ret = pcmcia_loop_config(link, scr24x_config_check, NULL);
+ if (ret < 0)
+ goto err;
+
+ dev->dev = &link->dev;
+ dev->regs = devm_ioport_map(&link->dev,
+ link->resource[PCMCIA_IOPORT_0]->start,
+ resource_size(link->resource[PCMCIA_IOPORT_0]));
+ if (!dev->regs) {
+ ret = -EIO;
+ goto err;
+ }
+
+ cdev_init(&dev->c_dev, &scr24x_fops);
+ dev->c_dev.owner = THIS_MODULE;
+ dev->c_dev.ops = &scr24x_fops;
+ ret = cdev_add(&dev->c_dev, MKDEV(MAJOR(scr24x_devt), dev->devno), 1);
+ if (ret < 0)
+ goto err;
+
+ ret = pcmcia_enable_device(link);
+ if (ret < 0) {
+ pcmcia_disable_device(link);
+ goto err;
+ }
+
+ device_create(scr24x_class, NULL, MKDEV(MAJOR(scr24x_devt), dev->devno),
+ NULL, "scr24x%d", dev->devno);
+
+ dev_info(&link->dev, "SCR24x Chip Card Interface\n");
+ return 0;
+
+err:
+ if (dev->devno < SCR24X_DEVS)
+ clear_bit(dev->devno, scr24x_minors);
+ kfree (dev);
+ return ret;
+}
+
+static void scr24x_remove(struct pcmcia_device *link)
+{
+ struct scr24x_dev *dev = (struct scr24x_dev *)link->priv;
+
+ device_destroy(scr24x_class, MKDEV(MAJOR(scr24x_devt), dev->devno));
+ mutex_lock(&dev->lock);
+ pcmcia_disable_device(link);
+ cdev_del(&dev->c_dev);
+ clear_bit(dev->devno, scr24x_minors);
+ dev->dev = NULL;
+ mutex_unlock(&dev->lock);
+
+ kref_put(&dev->refcnt, scr24x_delete);
+}
+
+static const struct pcmcia_device_id scr24x_ids[] = {
+ PCMCIA_DEVICE_PROD_ID12("HP", "PC Card Smart Card Reader",
+ 0x53cb94f9, 0xbfdf89a5),
+ PCMCIA_DEVICE_PROD_ID1("SCR241 PCMCIA", 0x6271efa3),
+ PCMCIA_DEVICE_PROD_ID1("SCR243 PCMCIA", 0x2054e8de),
+ PCMCIA_DEVICE_PROD_ID1("SCR24x PCMCIA", 0x54a33665),
+ PCMCIA_DEVICE_NULL
+};
+MODULE_DEVICE_TABLE(pcmcia, scr24x_ids);
+
+static struct pcmcia_driver scr24x_driver = {
+ .owner = THIS_MODULE,
+ .name = "scr24x_cs",
+ .probe = scr24x_probe,
+ .remove = scr24x_remove,
+ .id_table = scr24x_ids,
+};
+
+static int __init scr24x_init(void)
+{
+ int ret;
+
+ scr24x_class = class_create(THIS_MODULE, "scr24x");
+ if (IS_ERR(scr24x_class))
+ return PTR_ERR(scr24x_class);
+
+ ret = alloc_chrdev_region(&scr24x_devt, 0, SCR24X_DEVS, "scr24x");
+ if (ret < 0) {
+ class_destroy(scr24x_class);
+ return ret;
+ }
+
+ ret = pcmcia_register_driver(&scr24x_driver);
+ if (ret < 0) {
+ unregister_chrdev_region(scr24x_devt, SCR24X_DEVS);
+ class_destroy(scr24x_class);
+ }
+
+ return ret;
+}
+
+static void __exit scr24x_exit(void)
+{
+ pcmcia_unregister_driver(&scr24x_driver);
+ unregister_chrdev_region(scr24x_devt, SCR24X_DEVS);
+ class_destroy(scr24x_class);
+}
+
+module_init(scr24x_init);
+module_exit(scr24x_exit);
+
+MODULE_AUTHOR("Lubomir Rintel");
+MODULE_DESCRIPTION("SCR24x PCMCIA Smart Card Reader Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/char/ppdev.c b/drivers/char/ppdev.c
index 6af1ce04b3da..02819e0703c8 100644
--- a/drivers/char/ppdev.c
+++ b/drivers/char/ppdev.c
@@ -86,6 +86,9 @@ struct pp_struct {
long default_inactivity;
};
+/* should we use PARDEVICE_MAX here? */
+static struct device *devices[PARPORT_MAX];
+
/* pp_struct.flags bitfields */
#define PP_CLAIMED (1<<0)
#define PP_EXCL (1<<1)
@@ -294,7 +297,7 @@ static int register_device(int minor, struct pp_struct *pp)
port = parport_find_number(minor);
if (!port) {
- printk(KERN_WARNING "%s: no associated port!\n", name);
+ pr_warn("%s: no associated port!\n", name);
kfree(name);
return -ENXIO;
}
@@ -305,10 +308,10 @@ static int register_device(int minor, struct pp_struct *pp)
ppdev_cb.private = pp;
pdev = parport_register_dev_model(port, name, &ppdev_cb, minor);
parport_put_port(port);
+ kfree(name);
if (!pdev) {
- printk(KERN_WARNING "%s: failed to register device!\n", name);
- kfree(name);
+ pr_warn("%s: failed to register device!\n", name);
return -ENXIO;
}
@@ -789,13 +792,29 @@ static const struct file_operations pp_fops = {
static void pp_attach(struct parport *port)
{
- device_create(ppdev_class, port->dev, MKDEV(PP_MAJOR, port->number),
- NULL, "parport%d", port->number);
+ struct device *ret;
+
+ if (devices[port->number])
+ return;
+
+ ret = device_create(ppdev_class, port->dev,
+ MKDEV(PP_MAJOR, port->number), NULL,
+ "parport%d", port->number);
+ if (IS_ERR(ret)) {
+ pr_err("Failed to create device parport%d\n",
+ port->number);
+ return;
+ }
+ devices[port->number] = ret;
}
static void pp_detach(struct parport *port)
{
+ if (!devices[port->number])
+ return;
+
device_destroy(ppdev_class, MKDEV(PP_MAJOR, port->number));
+ devices[port->number] = NULL;
}
static int pp_probe(struct pardevice *par_dev)
@@ -822,8 +841,7 @@ static int __init ppdev_init(void)
int err = 0;
if (register_chrdev(PP_MAJOR, CHRDEV, &pp_fops)) {
- printk(KERN_WARNING CHRDEV ": unable to get major %d\n",
- PP_MAJOR);
+ pr_warn(CHRDEV ": unable to get major %d\n", PP_MAJOR);
return -EIO;
}
ppdev_class = class_create(THIS_MODULE, CHRDEV);
@@ -833,11 +851,11 @@ static int __init ppdev_init(void)
}
err = parport_register_driver(&pp_driver);
if (err < 0) {
- printk(KERN_WARNING CHRDEV ": unable to register with parport\n");
+ pr_warn(CHRDEV ": unable to register with parport\n");
goto out_class;
}
- printk(KERN_INFO PP_VERSION "\n");
+ pr_info(PP_VERSION "\n");
goto out;
out_class:
diff --git a/drivers/char/snsc.c b/drivers/char/snsc.c
index 10e56323f390..ec07f0e99732 100644
--- a/drivers/char/snsc.c
+++ b/drivers/char/snsc.c
@@ -285,7 +285,7 @@ scdrv_write(struct file *file, const char __user *buf,
DECLARE_WAITQUEUE(wait, current);
if (file->f_flags & O_NONBLOCK) {
- spin_unlock(&sd->sd_wlock);
+ spin_unlock_irqrestore(&sd->sd_wlock, flags);
up(&sd->sd_wbs);
return -EAGAIN;
}
diff --git a/drivers/char/tile-srom.c b/drivers/char/tile-srom.c
index 398800edb2cc..3d4cca64b2d4 100644
--- a/drivers/char/tile-srom.c
+++ b/drivers/char/tile-srom.c
@@ -312,7 +312,8 @@ ATTRIBUTE_GROUPS(srom_dev);
static char *srom_devnode(struct device *dev, umode_t *mode)
{
- *mode = S_IRUGO | S_IWUSR;
+ if (mode)
+ *mode = 0644;
return kasprintf(GFP_KERNEL, "srom/%s", dev_name(dev));
}
diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index cd84934774cc..ce861a2853a4 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -13,12 +13,26 @@ config FPGA
if FPGA
+config FPGA_REGION
+ tristate "FPGA Region"
+ depends on OF && FPGA_BRIDGE
+ help
+ FPGA Regions allow loading FPGA images under control of
+ the Device Tree.
+
config FPGA_MGR_SOCFPGA
tristate "Altera SOCFPGA FPGA Manager"
- depends on ARCH_SOCFPGA
+ depends on ARCH_SOCFPGA || COMPILE_TEST
help
FPGA manager driver support for Altera SOCFPGA.
+config FPGA_MGR_SOCFPGA_A10
+ tristate "Altera SoCFPGA Arria10"
+ depends on ARCH_SOCFPGA || COMPILE_TEST
+ select REGMAP_MMIO
+ help
+ FPGA manager driver support for Altera Arria10 SoCFPGA.
+
config FPGA_MGR_ZYNQ_FPGA
tristate "Xilinx Zynq FPGA"
depends on ARCH_ZYNQ || COMPILE_TEST
@@ -26,6 +40,29 @@ config FPGA_MGR_ZYNQ_FPGA
help
FPGA manager driver support for Xilinx Zynq FPGAs.
+config FPGA_BRIDGE
+ tristate "FPGA Bridge Framework"
+ depends on OF
+ help
+ Say Y here if you want to support bridges connected between host
+ processors and FPGAs or between FPGAs.
+
+config SOCFPGA_FPGA_BRIDGE
+ tristate "Altera SoCFPGA FPGA Bridges"
+ depends on ARCH_SOCFPGA && FPGA_BRIDGE
+ help
+ Say Y to enable drivers for FPGA bridges for Altera SOCFPGA
+ devices.
+
+config ALTERA_FREEZE_BRIDGE
+ tristate "Altera FPGA Freeze Bridge"
+ depends on ARCH_SOCFPGA && FPGA_BRIDGE
+ help
+ Say Y to enable drivers for Altera FPGA Freeze bridges. A
+ freeze bridge is a bridge that exists in the FPGA fabric to
+ isolate one region of the FPGA from the busses while that
+ region is being reprogrammed.
+
endif # FPGA
endmenu
diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index 8d83fc6b1613..8df07bcf42a6 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -7,4 +7,13 @@ obj-$(CONFIG_FPGA) += fpga-mgr.o
# FPGA Manager Drivers
obj-$(CONFIG_FPGA_MGR_SOCFPGA) += socfpga.o
+obj-$(CONFIG_FPGA_MGR_SOCFPGA_A10) += socfpga-a10.o
obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o
+
+# FPGA Bridge Drivers
+obj-$(CONFIG_FPGA_BRIDGE) += fpga-bridge.o
+obj-$(CONFIG_SOCFPGA_FPGA_BRIDGE) += altera-hps2fpga.o altera-fpga2sdram.o
+obj-$(CONFIG_ALTERA_FREEZE_BRIDGE) += altera-freeze-bridge.o
+
+# High Level Interfaces
+obj-$(CONFIG_FPGA_REGION) += fpga-region.o
diff --git a/drivers/fpga/altera-fpga2sdram.c b/drivers/fpga/altera-fpga2sdram.c
new file mode 100644
index 000000000000..d4eeb74388da
--- /dev/null
+++ b/drivers/fpga/altera-fpga2sdram.c
@@ -0,0 +1,180 @@
+/*
+ * FPGA to SDRAM Bridge Driver for Altera SoCFPGA Devices
+ *
+ * Copyright (C) 2013-2016 Altera Corporation, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This driver manages a bridge between an FPGA and the SDRAM used by the ARM
+ * host processor system (HPS).
+ *
+ * The bridge contains 4 read ports, 4 write ports, and 6 command ports.
+ * Reconfiguring these ports requires that no SDRAM transactions occur during
+ * reconfiguration. The code reconfiguring the ports cannot run out of SDRAM
+ * nor can the FPGA access the SDRAM during reconfiguration. This driver does
+ * not support reconfiguring the ports. The ports are configured by code
+ * running out of on chip ram before Linux is started and the configuration
+ * is passed in a handoff register in the system manager.
+ *
+ * This driver supports enabling and disabling of the configured ports, which
+ * allows for safe reprogramming of the FPGA, assuming that the new FPGA image
+ * uses the same port configuration. Bridges must be disabled before
+ * reprogramming the FPGA and re-enabled after the FPGA has been programmed.
+ */
+
+#include <linux/fpga/fpga-bridge.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+
+#define ALT_SDR_CTL_FPGAPORTRST_OFST 0x80
+#define ALT_SDR_CTL_FPGAPORTRST_PORTRSTN_MSK 0x00003fff
+#define ALT_SDR_CTL_FPGAPORTRST_RD_SHIFT 0
+#define ALT_SDR_CTL_FPGAPORTRST_WR_SHIFT 4
+#define ALT_SDR_CTL_FPGAPORTRST_CTRL_SHIFT 8
+
+/*
+ * From the Cyclone V HPS Memory Map document:
+ * These registers are used to store handoff information between the
+ * preloader and the OS. These 8 registers can be used to store any
+ * information. The contents of these registers have no impact on
+ * the state of the HPS hardware.
+ */
+#define SYSMGR_ISWGRP_HANDOFF3 (0x8C)
+
+#define F2S_BRIDGE_NAME "fpga2sdram"
+
+struct alt_fpga2sdram_data {
+ struct device *dev;
+ struct regmap *sdrctl;
+ int mask;
+};
+
+static int alt_fpga2sdram_enable_show(struct fpga_bridge *bridge)
+{
+ struct alt_fpga2sdram_data *priv = bridge->priv;
+ int value;
+
+ regmap_read(priv->sdrctl, ALT_SDR_CTL_FPGAPORTRST_OFST, &value);
+
+ return (value & priv->mask) == priv->mask;
+}
+
+static inline int _alt_fpga2sdram_enable_set(struct alt_fpga2sdram_data *priv,
+ bool enable)
+{
+ return regmap_update_bits(priv->sdrctl, ALT_SDR_CTL_FPGAPORTRST_OFST,
+ priv->mask, enable ? priv->mask : 0);
+}
+
+static int alt_fpga2sdram_enable_set(struct fpga_bridge *bridge, bool enable)
+{
+ return _alt_fpga2sdram_enable_set(bridge->priv, enable);
+}
+
+struct prop_map {
+ char *prop_name;
+ u32 *prop_value;
+ u32 prop_max;
+};
+
+static const struct fpga_bridge_ops altera_fpga2sdram_br_ops = {
+ .enable_set = alt_fpga2sdram_enable_set,
+ .enable_show = alt_fpga2sdram_enable_show,
+};
+
+static const struct of_device_id altera_fpga_of_match[] = {
+ { .compatible = "altr,socfpga-fpga2sdram-bridge" },
+ {},
+};
+
+static int alt_fpga_bridge_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct alt_fpga2sdram_data *priv;
+ u32 enable;
+ struct regmap *sysmgr;
+ int ret = 0;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = dev;
+
+ priv->sdrctl = syscon_regmap_lookup_by_compatible("altr,sdr-ctl");
+ if (IS_ERR(priv->sdrctl)) {
+ dev_err(dev, "regmap for altr,sdr-ctl lookup failed.\n");
+ return PTR_ERR(priv->sdrctl);
+ }
+
+ sysmgr = syscon_regmap_lookup_by_compatible("altr,sys-mgr");
+ if (IS_ERR(sysmgr)) {
+ dev_err(dev, "regmap for altr,sys-mgr lookup failed.\n");
+ return PTR_ERR(sysmgr);
+ }
+
+ /* Get f2s bridge configuration saved in handoff register */
+ regmap_read(sysmgr, SYSMGR_ISWGRP_HANDOFF3, &priv->mask);
+
+ ret = fpga_bridge_register(dev, F2S_BRIDGE_NAME,
+ &altera_fpga2sdram_br_ops, priv);
+ if (ret)
+ return ret;
+
+ dev_info(dev, "driver initialized with handoff %08x\n", priv->mask);
+
+ if (!of_property_read_u32(dev->of_node, "bridge-enable", &enable)) {
+ if (enable > 1) {
+ dev_warn(dev, "invalid bridge-enable %u > 1\n", enable);
+ } else {
+ dev_info(dev, "%s bridge\n",
+ (enable ? "enabling" : "disabling"));
+ ret = _alt_fpga2sdram_enable_set(priv, enable);
+ if (ret) {
+ fpga_bridge_unregister(&pdev->dev);
+ return ret;
+ }
+ }
+ }
+
+ return ret;
+}
+
+static int alt_fpga_bridge_remove(struct platform_device *pdev)
+{
+ fpga_bridge_unregister(&pdev->dev);
+
+ return 0;
+}
+
+MODULE_DEVICE_TABLE(of, altera_fpga_of_match);
+
+static struct platform_driver altera_fpga_driver = {
+ .probe = alt_fpga_bridge_probe,
+ .remove = alt_fpga_bridge_remove,
+ .driver = {
+ .name = "altera_fpga2sdram_bridge",
+ .of_match_table = of_match_ptr(altera_fpga_of_match),
+ },
+};
+
+module_platform_driver(altera_fpga_driver);
+
+MODULE_DESCRIPTION("Altera SoCFPGA FPGA to SDRAM Bridge");
+MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/fpga/altera-freeze-bridge.c b/drivers/fpga/altera-freeze-bridge.c
new file mode 100644
index 000000000000..8dcd9fb22cb9
--- /dev/null
+++ b/drivers/fpga/altera-freeze-bridge.c
@@ -0,0 +1,273 @@
+/*
+ * FPGA Freeze Bridge Controller
+ *
+ * Copyright (C) 2016 Altera Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of_device.h>
+#include <linux/module.h>
+#include <linux/fpga/fpga-bridge.h>
+
+#define FREEZE_CSR_STATUS_OFFSET 0
+#define FREEZE_CSR_CTRL_OFFSET 4
+#define FREEZE_CSR_ILLEGAL_REQ_OFFSET 8
+#define FREEZE_CSR_REG_VERSION 12
+
+#define FREEZE_CSR_SUPPORTED_VERSION 2
+
+#define FREEZE_CSR_STATUS_FREEZE_REQ_DONE BIT(0)
+#define FREEZE_CSR_STATUS_UNFREEZE_REQ_DONE BIT(1)
+
+#define FREEZE_CSR_CTRL_FREEZE_REQ BIT(0)
+#define FREEZE_CSR_CTRL_RESET_REQ BIT(1)
+#define FREEZE_CSR_CTRL_UNFREEZE_REQ BIT(2)
+
+#define FREEZE_BRIDGE_NAME "freeze"
+
+struct altera_freeze_br_data {
+ struct device *dev;
+ void __iomem *base_addr;
+ bool enable;
+};
+
+/*
+ * Poll status until status bit is set or we have a timeout.
+ */
+static int altera_freeze_br_req_ack(struct altera_freeze_br_data *priv,
+ u32 timeout, u32 req_ack)
+{
+ struct device *dev = priv->dev;
+ void __iomem *csr_illegal_req_addr = priv->base_addr +
+ FREEZE_CSR_ILLEGAL_REQ_OFFSET;
+ u32 status, illegal, ctrl;
+ int ret = -ETIMEDOUT;
+
+ do {
+ illegal = readl(csr_illegal_req_addr);
+ if (illegal) {
+ dev_err(dev, "illegal request detected 0x%x", illegal);
+
+ writel(1, csr_illegal_req_addr);
+
+ illegal = readl(csr_illegal_req_addr);
+ if (illegal)
+ dev_err(dev, "illegal request not cleared 0x%x",
+ illegal);
+
+ ret = -EINVAL;
+ break;
+ }
+
+ status = readl(priv->base_addr + FREEZE_CSR_STATUS_OFFSET);
+ dev_dbg(dev, "%s %x %x\n", __func__, status, req_ack);
+ status &= req_ack;
+ if (status) {
+ ctrl = readl(priv->base_addr + FREEZE_CSR_CTRL_OFFSET);
+ dev_dbg(dev, "%s request %x acknowledged %x %x\n",
+ __func__, req_ack, status, ctrl);
+ ret = 0;
+ break;
+ }
+
+ udelay(1);
+ } while (timeout--);
+
+ if (ret == -ETIMEDOUT)
+ dev_err(dev, "%s timeout waiting for 0x%x\n",
+ __func__, req_ack);
+
+ return ret;
+}
+
+static int altera_freeze_br_do_freeze(struct altera_freeze_br_data *priv,
+ u32 timeout)
+{
+ struct device *dev = priv->dev;
+ void __iomem *csr_ctrl_addr = priv->base_addr +
+ FREEZE_CSR_CTRL_OFFSET;
+ u32 status;
+ int ret;
+
+ status = readl(priv->base_addr + FREEZE_CSR_STATUS_OFFSET);
+
+ dev_dbg(dev, "%s %d %d\n", __func__, status, readl(csr_ctrl_addr));
+
+ if (status & FREEZE_CSR_STATUS_FREEZE_REQ_DONE) {
+ dev_dbg(dev, "%s bridge already disabled %d\n",
+ __func__, status);
+ return 0;
+ } else if (!(status & FREEZE_CSR_STATUS_UNFREEZE_REQ_DONE)) {
+ dev_err(dev, "%s bridge not enabled %d\n", __func__, status);
+ return -EINVAL;
+ }
+
+ writel(FREEZE_CSR_CTRL_FREEZE_REQ, csr_ctrl_addr);
+
+ ret = altera_freeze_br_req_ack(priv, timeout,
+ FREEZE_CSR_STATUS_FREEZE_REQ_DONE);
+
+ if (ret)
+ writel(0, csr_ctrl_addr);
+ else
+ writel(FREEZE_CSR_CTRL_RESET_REQ, csr_ctrl_addr);
+
+ return ret;
+}
+
+static int altera_freeze_br_do_unfreeze(struct altera_freeze_br_data *priv,
+ u32 timeout)
+{
+ struct device *dev = priv->dev;
+ void __iomem *csr_ctrl_addr = priv->base_addr +
+ FREEZE_CSR_CTRL_OFFSET;
+ u32 status;
+ int ret;
+
+ writel(0, csr_ctrl_addr);
+
+ status = readl(priv->base_addr + FREEZE_CSR_STATUS_OFFSET);
+
+ dev_dbg(dev, "%s %d %d\n", __func__, status, readl(csr_ctrl_addr));
+
+ if (status & FREEZE_CSR_STATUS_UNFREEZE_REQ_DONE) {
+ dev_dbg(dev, "%s bridge already enabled %d\n",
+ __func__, status);
+ return 0;
+ } else if (!(status & FREEZE_CSR_STATUS_FREEZE_REQ_DONE)) {
+ dev_err(dev, "%s bridge not frozen %d\n", __func__, status);
+ return -EINVAL;
+ }
+
+ writel(FREEZE_CSR_CTRL_UNFREEZE_REQ, csr_ctrl_addr);
+
+ ret = altera_freeze_br_req_ack(priv, timeout,
+ FREEZE_CSR_STATUS_UNFREEZE_REQ_DONE);
+
+ status = readl(priv->base_addr + FREEZE_CSR_STATUS_OFFSET);
+
+ dev_dbg(dev, "%s %d %d\n", __func__, status, readl(csr_ctrl_addr));
+
+ writel(0, csr_ctrl_addr);
+
+ return ret;
+}
+
+/*
+ * enable = 1 : allow traffic through the bridge
+ * enable = 0 : disable traffic through the bridge
+ */
+static int altera_freeze_br_enable_set(struct fpga_bridge *bridge,
+ bool enable)
+{
+ struct altera_freeze_br_data *priv = bridge->priv;
+ struct fpga_image_info *info = bridge->info;
+ u32 timeout = 0;
+ int ret;
+
+ if (enable) {
+ if (info)
+ timeout = info->enable_timeout_us;
+
+ ret = altera_freeze_br_do_unfreeze(bridge->priv, timeout);
+ } else {
+ if (info)
+ timeout = info->disable_timeout_us;
+
+ ret = altera_freeze_br_do_freeze(bridge->priv, timeout);
+ }
+
+ if (!ret)
+ priv->enable = enable;
+
+ return ret;
+}
+
+static int altera_freeze_br_enable_show(struct fpga_bridge *bridge)
+{
+ struct altera_freeze_br_data *priv = bridge->priv;
+
+ return priv->enable;
+}
+
+static struct fpga_bridge_ops altera_freeze_br_br_ops = {
+ .enable_set = altera_freeze_br_enable_set,
+ .enable_show = altera_freeze_br_enable_show,
+};
+
+static const struct of_device_id altera_freeze_br_of_match[] = {
+ { .compatible = "altr,freeze-bridge-controller", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, altera_freeze_br_of_match);
+
+static int altera_freeze_br_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = pdev->dev.of_node;
+ struct altera_freeze_br_data *priv;
+ struct resource *res;
+ u32 status, revision;
+
+ if (!np)
+ return -ENODEV;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->base_addr = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->base_addr))
+ return PTR_ERR(priv->base_addr);
+
+ status = readl(priv->base_addr + FREEZE_CSR_STATUS_OFFSET);
+ if (status & FREEZE_CSR_STATUS_UNFREEZE_REQ_DONE)
+ priv->enable = 1;
+
+ revision = readl(priv->base_addr + FREEZE_CSR_REG_VERSION);
+ if (revision != FREEZE_CSR_SUPPORTED_VERSION)
+ dev_warn(dev,
+ "%s Freeze Controller unexpected revision %d != %d\n",
+ __func__, revision, FREEZE_CSR_SUPPORTED_VERSION);
+
+ return fpga_bridge_register(dev, FREEZE_BRIDGE_NAME,
+ &altera_freeze_br_br_ops, priv);
+}
+
+static int altera_freeze_br_remove(struct platform_device *pdev)
+{
+ fpga_bridge_unregister(&pdev->dev);
+
+ return 0;
+}
+
+static struct platform_driver altera_freeze_br_driver = {
+ .probe = altera_freeze_br_probe,
+ .remove = altera_freeze_br_remove,
+ .driver = {
+ .name = "altera_freeze_br",
+ .of_match_table = of_match_ptr(altera_freeze_br_of_match),
+ },
+};
+
+module_platform_driver(altera_freeze_br_driver);
+
+MODULE_DESCRIPTION("Altera Freeze Bridge");
+MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/fpga/altera-hps2fpga.c b/drivers/fpga/altera-hps2fpga.c
new file mode 100644
index 000000000000..4b354c79be31
--- /dev/null
+++ b/drivers/fpga/altera-hps2fpga.c
@@ -0,0 +1,222 @@
+/*
+ * FPGA to/from HPS Bridge Driver for Altera SoCFPGA Devices
+ *
+ * Copyright (C) 2013-2016 Altera Corporation, All Rights Reserved.
+ *
+ * Includes this patch from the mailing list:
+ * fpga: altera-hps2fpga: fix HPS2FPGA bridge visibility to L3 masters
+ * Signed-off-by: Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This driver manages bridges on a Altera SOCFPGA between the ARM host
+ * processor system (HPS) and the embedded FPGA.
+ *
+ * This driver supports enabling and disabling of the configured ports, which
+ * allows for safe reprogramming of the FPGA, assuming that the new FPGA image
+ * uses the same port configuration. Bridges must be disabled before
+ * reprogramming the FPGA and re-enabled after the FPGA has been programmed.
+ */
+
+#include <linux/clk.h>
+#include <linux/fpga/fpga-bridge.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/spinlock.h>
+
+#define ALT_L3_REMAP_OFST 0x0
+#define ALT_L3_REMAP_MPUZERO_MSK 0x00000001
+#define ALT_L3_REMAP_H2F_MSK 0x00000008
+#define ALT_L3_REMAP_LWH2F_MSK 0x00000010
+
+#define HPS2FPGA_BRIDGE_NAME "hps2fpga"
+#define LWHPS2FPGA_BRIDGE_NAME "lwhps2fpga"
+#define FPGA2HPS_BRIDGE_NAME "fpga2hps"
+
+struct altera_hps2fpga_data {
+ const char *name;
+ struct reset_control *bridge_reset;
+ struct regmap *l3reg;
+ unsigned int remap_mask;
+ struct clk *clk;
+};
+
+static int alt_hps2fpga_enable_show(struct fpga_bridge *bridge)
+{
+ struct altera_hps2fpga_data *priv = bridge->priv;
+
+ return reset_control_status(priv->bridge_reset);
+}
+
+/* The L3 REMAP register is write only, so keep a cached value. */
+static unsigned int l3_remap_shadow;
+static spinlock_t l3_remap_lock;
+
+static int _alt_hps2fpga_enable_set(struct altera_hps2fpga_data *priv,
+ bool enable)
+{
+ unsigned long flags;
+ int ret;
+
+ /* bring bridge out of reset */
+ if (enable)
+ ret = reset_control_deassert(priv->bridge_reset);
+ else
+ ret = reset_control_assert(priv->bridge_reset);
+ if (ret)
+ return ret;
+
+ /* Allow bridge to be visible to L3 masters or not */
+ if (priv->remap_mask) {
+ spin_lock_irqsave(&l3_remap_lock, flags);
+ l3_remap_shadow |= ALT_L3_REMAP_MPUZERO_MSK;
+
+ if (enable)
+ l3_remap_shadow |= priv->remap_mask;
+ else
+ l3_remap_shadow &= ~priv->remap_mask;
+
+ ret = regmap_write(priv->l3reg, ALT_L3_REMAP_OFST,
+ l3_remap_shadow);
+ spin_unlock_irqrestore(&l3_remap_lock, flags);
+ }
+
+ return ret;
+}
+
+static int alt_hps2fpga_enable_set(struct fpga_bridge *bridge, bool enable)
+{
+ return _alt_hps2fpga_enable_set(bridge->priv, enable);
+}
+
+static const struct fpga_bridge_ops altera_hps2fpga_br_ops = {
+ .enable_set = alt_hps2fpga_enable_set,
+ .enable_show = alt_hps2fpga_enable_show,
+};
+
+static struct altera_hps2fpga_data hps2fpga_data = {
+ .name = HPS2FPGA_BRIDGE_NAME,
+ .remap_mask = ALT_L3_REMAP_H2F_MSK,
+};
+
+static struct altera_hps2fpga_data lwhps2fpga_data = {
+ .name = LWHPS2FPGA_BRIDGE_NAME,
+ .remap_mask = ALT_L3_REMAP_LWH2F_MSK,
+};
+
+static struct altera_hps2fpga_data fpga2hps_data = {
+ .name = FPGA2HPS_BRIDGE_NAME,
+};
+
+static const struct of_device_id altera_fpga_of_match[] = {
+ { .compatible = "altr,socfpga-hps2fpga-bridge",
+ .data = &hps2fpga_data },
+ { .compatible = "altr,socfpga-lwhps2fpga-bridge",
+ .data = &lwhps2fpga_data },
+ { .compatible = "altr,socfpga-fpga2hps-bridge",
+ .data = &fpga2hps_data },
+ {},
+};
+
+static int alt_fpga_bridge_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct altera_hps2fpga_data *priv;
+ const struct of_device_id *of_id;
+ u32 enable;
+ int ret;
+
+ of_id = of_match_device(altera_fpga_of_match, dev);
+ priv = (struct altera_hps2fpga_data *)of_id->data;
+
+ priv->bridge_reset = of_reset_control_get_by_index(dev->of_node, 0);
+ if (IS_ERR(priv->bridge_reset)) {
+ dev_err(dev, "Could not get %s reset control\n", priv->name);
+ return PTR_ERR(priv->bridge_reset);
+ }
+
+ if (priv->remap_mask) {
+ priv->l3reg = syscon_regmap_lookup_by_compatible("altr,l3regs");
+ if (IS_ERR(priv->l3reg)) {
+ dev_err(dev, "regmap for altr,l3regs lookup failed\n");
+ return PTR_ERR(priv->l3reg);
+ }
+ }
+
+ priv->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(priv->clk)) {
+ dev_err(dev, "no clock specified\n");
+ return PTR_ERR(priv->clk);
+ }
+
+ ret = clk_prepare_enable(priv->clk);
+ if (ret) {
+ dev_err(dev, "could not enable clock\n");
+ return -EBUSY;
+ }
+
+ spin_lock_init(&l3_remap_lock);
+
+ if (!of_property_read_u32(dev->of_node, "bridge-enable", &enable)) {
+ if (enable > 1) {
+ dev_warn(dev, "invalid bridge-enable %u > 1\n", enable);
+ } else {
+ dev_info(dev, "%s bridge\n",
+ (enable ? "enabling" : "disabling"));
+
+ ret = _alt_hps2fpga_enable_set(priv, enable);
+ if (ret) {
+ fpga_bridge_unregister(&pdev->dev);
+ return ret;
+ }
+ }
+ }
+
+ return fpga_bridge_register(dev, priv->name, &altera_hps2fpga_br_ops,
+ priv);
+}
+
+static int alt_fpga_bridge_remove(struct platform_device *pdev)
+{
+ struct fpga_bridge *bridge = platform_get_drvdata(pdev);
+ struct altera_hps2fpga_data *priv = bridge->priv;
+
+ fpga_bridge_unregister(&pdev->dev);
+
+ clk_disable_unprepare(priv->clk);
+
+ return 0;
+}
+
+MODULE_DEVICE_TABLE(of, altera_fpga_of_match);
+
+static struct platform_driver alt_fpga_bridge_driver = {
+ .probe = alt_fpga_bridge_probe,
+ .remove = alt_fpga_bridge_remove,
+ .driver = {
+ .name = "altera_hps2fpga_bridge",
+ .of_match_table = of_match_ptr(altera_fpga_of_match),
+ },
+};
+
+module_platform_driver(alt_fpga_bridge_driver);
+
+MODULE_DESCRIPTION("Altera SoCFPGA HPS to FPGA Bridge");
+MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/fpga/fpga-bridge.c b/drivers/fpga/fpga-bridge.c
new file mode 100644
index 000000000000..33ee83e6373c
--- /dev/null
+++ b/drivers/fpga/fpga-bridge.c
@@ -0,0 +1,395 @@
+/*
+ * FPGA Bridge Framework Driver
+ *
+ * Copyright (C) 2013-2016 Altera Corporation, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/fpga/fpga-bridge.h>
+#include <linux/idr.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+static DEFINE_IDA(fpga_bridge_ida);
+static struct class *fpga_bridge_class;
+
+/* Lock for adding/removing bridges to linked lists*/
+spinlock_t bridge_list_lock;
+
+static int fpga_bridge_of_node_match(struct device *dev, const void *data)
+{
+ return dev->of_node == data;
+}
+
+/**
+ * fpga_bridge_enable - Enable transactions on the bridge
+ *
+ * @bridge: FPGA bridge
+ *
+ * Return: 0 for success, error code otherwise.
+ */
+int fpga_bridge_enable(struct fpga_bridge *bridge)
+{
+ dev_dbg(&bridge->dev, "enable\n");
+
+ if (bridge->br_ops && bridge->br_ops->enable_set)
+ return bridge->br_ops->enable_set(bridge, 1);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(fpga_bridge_enable);
+
+/**
+ * fpga_bridge_disable - Disable transactions on the bridge
+ *
+ * @bridge: FPGA bridge
+ *
+ * Return: 0 for success, error code otherwise.
+ */
+int fpga_bridge_disable(struct fpga_bridge *bridge)
+{
+ dev_dbg(&bridge->dev, "disable\n");
+
+ if (bridge->br_ops && bridge->br_ops->enable_set)
+ return bridge->br_ops->enable_set(bridge, 0);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(fpga_bridge_disable);
+
+/**
+ * of_fpga_bridge_get - get an exclusive reference to a fpga bridge
+ *
+ * @np: node pointer of a FPGA bridge
+ * @info: fpga image specific information
+ *
+ * Return fpga_bridge struct if successful.
+ * Return -EBUSY if someone already has a reference to the bridge.
+ * Return -ENODEV if @np is not a FPGA Bridge.
+ */
+struct fpga_bridge *of_fpga_bridge_get(struct device_node *np,
+ struct fpga_image_info *info)
+
+{
+ struct device *dev;
+ struct fpga_bridge *bridge;
+ int ret = -ENODEV;
+
+ dev = class_find_device(fpga_bridge_class, NULL, np,
+ fpga_bridge_of_node_match);
+ if (!dev)
+ goto err_dev;
+
+ bridge = to_fpga_bridge(dev);
+ if (!bridge)
+ goto err_dev;
+
+ bridge->info = info;
+
+ if (!mutex_trylock(&bridge->mutex)) {
+ ret = -EBUSY;
+ goto err_dev;
+ }
+
+ if (!try_module_get(dev->parent->driver->owner))
+ goto err_ll_mod;
+
+ dev_dbg(&bridge->dev, "get\n");
+
+ return bridge;
+
+err_ll_mod:
+ mutex_unlock(&bridge->mutex);
+err_dev:
+ put_device(dev);
+ return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(of_fpga_bridge_get);
+
+/**
+ * fpga_bridge_put - release a reference to a bridge
+ *
+ * @bridge: FPGA bridge
+ */
+void fpga_bridge_put(struct fpga_bridge *bridge)
+{
+ dev_dbg(&bridge->dev, "put\n");
+
+ bridge->info = NULL;
+ module_put(bridge->dev.parent->driver->owner);
+ mutex_unlock(&bridge->mutex);
+ put_device(&bridge->dev);
+}
+EXPORT_SYMBOL_GPL(fpga_bridge_put);
+
+/**
+ * fpga_bridges_enable - enable bridges in a list
+ * @bridge_list: list of FPGA bridges
+ *
+ * Enable each bridge in the list. If list is empty, do nothing.
+ *
+ * Return 0 for success or empty bridge list; return error code otherwise.
+ */
+int fpga_bridges_enable(struct list_head *bridge_list)
+{
+ struct fpga_bridge *bridge;
+ struct list_head *node;
+ int ret;
+
+ list_for_each(node, bridge_list) {
+ bridge = list_entry(node, struct fpga_bridge, node);
+ ret = fpga_bridge_enable(bridge);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(fpga_bridges_enable);
+
+/**
+ * fpga_bridges_disable - disable bridges in a list
+ *
+ * @bridge_list: list of FPGA bridges
+ *
+ * Disable each bridge in the list. If list is empty, do nothing.
+ *
+ * Return 0 for success or empty bridge list; return error code otherwise.
+ */
+int fpga_bridges_disable(struct list_head *bridge_list)
+{
+ struct fpga_bridge *bridge;
+ struct list_head *node;
+ int ret;
+
+ list_for_each(node, bridge_list) {
+ bridge = list_entry(node, struct fpga_bridge, node);
+ ret = fpga_bridge_disable(bridge);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(fpga_bridges_disable);
+
+/**
+ * fpga_bridges_put - put bridges
+ *
+ * @bridge_list: list of FPGA bridges
+ *
+ * For each bridge in the list, put the bridge and remove it from the list.
+ * If list is empty, do nothing.
+ */
+void fpga_bridges_put(struct list_head *bridge_list)
+{
+ struct fpga_bridge *bridge;
+ struct list_head *node, *next;
+ unsigned long flags;
+
+ list_for_each_safe(node, next, bridge_list) {
+ bridge = list_entry(node, struct fpga_bridge, node);
+
+ fpga_bridge_put(bridge);
+
+ spin_lock_irqsave(&bridge_list_lock, flags);
+ list_del(&bridge->node);
+ spin_unlock_irqrestore(&bridge_list_lock, flags);
+ }
+}
+EXPORT_SYMBOL_GPL(fpga_bridges_put);
+
+/**
+ * fpga_bridges_get_to_list - get a bridge, add it to a list
+ *
+ * @np: node pointer of a FPGA bridge
+ * @info: fpga image specific information
+ * @bridge_list: list of FPGA bridges
+ *
+ * Get an exclusive reference to the bridge and and it to the list.
+ *
+ * Return 0 for success, error code from of_fpga_bridge_get() othewise.
+ */
+int fpga_bridge_get_to_list(struct device_node *np,
+ struct fpga_image_info *info,
+ struct list_head *bridge_list)
+{
+ struct fpga_bridge *bridge;
+ unsigned long flags;
+
+ bridge = of_fpga_bridge_get(np, info);
+ if (IS_ERR(bridge))
+ return PTR_ERR(bridge);
+
+ spin_lock_irqsave(&bridge_list_lock, flags);
+ list_add(&bridge->node, bridge_list);
+ spin_unlock_irqrestore(&bridge_list_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(fpga_bridge_get_to_list);
+
+static ssize_t name_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct fpga_bridge *bridge = to_fpga_bridge(dev);
+
+ return sprintf(buf, "%s\n", bridge->name);
+}
+
+static ssize_t state_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct fpga_bridge *bridge = to_fpga_bridge(dev);
+ int enable = 1;
+
+ if (bridge->br_ops && bridge->br_ops->enable_show)
+ enable = bridge->br_ops->enable_show(bridge);
+
+ return sprintf(buf, "%s\n", enable ? "enabled" : "disabled");
+}
+
+static DEVICE_ATTR_RO(name);
+static DEVICE_ATTR_RO(state);
+
+static struct attribute *fpga_bridge_attrs[] = {
+ &dev_attr_name.attr,
+ &dev_attr_state.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(fpga_bridge);
+
+/**
+ * fpga_bridge_register - register a fpga bridge driver
+ * @dev: FPGA bridge device from pdev
+ * @name: FPGA bridge name
+ * @br_ops: pointer to structure of fpga bridge ops
+ * @priv: FPGA bridge private data
+ *
+ * Return: 0 for success, error code otherwise.
+ */
+int fpga_bridge_register(struct device *dev, const char *name,
+ const struct fpga_bridge_ops *br_ops, void *priv)
+{
+ struct fpga_bridge *bridge;
+ int id, ret = 0;
+
+ if (!name || !strlen(name)) {
+ dev_err(dev, "Attempt to register with no name!\n");
+ return -EINVAL;
+ }
+
+ bridge = kzalloc(sizeof(*bridge), GFP_KERNEL);
+ if (!bridge)
+ return -ENOMEM;
+
+ id = ida_simple_get(&fpga_bridge_ida, 0, 0, GFP_KERNEL);
+ if (id < 0) {
+ ret = id;
+ goto error_kfree;
+ }
+
+ mutex_init(&bridge->mutex);
+ INIT_LIST_HEAD(&bridge->node);
+
+ bridge->name = name;
+ bridge->br_ops = br_ops;
+ bridge->priv = priv;
+
+ device_initialize(&bridge->dev);
+ bridge->dev.class = fpga_bridge_class;
+ bridge->dev.parent = dev;
+ bridge->dev.of_node = dev->of_node;
+ bridge->dev.id = id;
+ dev_set_drvdata(dev, bridge);
+
+ ret = dev_set_name(&bridge->dev, "br%d", id);
+ if (ret)
+ goto error_device;
+
+ ret = device_add(&bridge->dev);
+ if (ret)
+ goto error_device;
+
+ of_platform_populate(dev->of_node, NULL, NULL, dev);
+
+ dev_info(bridge->dev.parent, "fpga bridge [%s] registered\n",
+ bridge->name);
+
+ return 0;
+
+error_device:
+ ida_simple_remove(&fpga_bridge_ida, id);
+error_kfree:
+ kfree(bridge);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(fpga_bridge_register);
+
+/**
+ * fpga_bridge_unregister - unregister a fpga bridge driver
+ * @dev: FPGA bridge device from pdev
+ */
+void fpga_bridge_unregister(struct device *dev)
+{
+ struct fpga_bridge *bridge = dev_get_drvdata(dev);
+
+ /*
+ * If the low level driver provides a method for putting bridge into
+ * a desired state upon unregister, do it.
+ */
+ if (bridge->br_ops && bridge->br_ops->fpga_bridge_remove)
+ bridge->br_ops->fpga_bridge_remove(bridge);
+
+ device_unregister(&bridge->dev);
+}
+EXPORT_SYMBOL_GPL(fpga_bridge_unregister);
+
+static void fpga_bridge_dev_release(struct device *dev)
+{
+ struct fpga_bridge *bridge = to_fpga_bridge(dev);
+
+ ida_simple_remove(&fpga_bridge_ida, bridge->dev.id);
+ kfree(bridge);
+}
+
+static int __init fpga_bridge_dev_init(void)
+{
+ spin_lock_init(&bridge_list_lock);
+
+ fpga_bridge_class = class_create(THIS_MODULE, "fpga_bridge");
+ if (IS_ERR(fpga_bridge_class))
+ return PTR_ERR(fpga_bridge_class);
+
+ fpga_bridge_class->dev_groups = fpga_bridge_groups;
+ fpga_bridge_class->dev_release = fpga_bridge_dev_release;
+
+ return 0;
+}
+
+static void __exit fpga_bridge_dev_exit(void)
+{
+ class_destroy(fpga_bridge_class);
+ ida_destroy(&fpga_bridge_ida);
+}
+
+MODULE_DESCRIPTION("FPGA Bridge Driver");
+MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>");
+MODULE_LICENSE("GPL v2");
+
+subsys_initcall(fpga_bridge_dev_init);
+module_exit(fpga_bridge_dev_exit);
diff --git a/drivers/fpga/fpga-mgr.c b/drivers/fpga/fpga-mgr.c
index 953dc9195937..f0a69d3e60a5 100644
--- a/drivers/fpga/fpga-mgr.c
+++ b/drivers/fpga/fpga-mgr.c
@@ -32,19 +32,20 @@ static struct class *fpga_mgr_class;
/**
* fpga_mgr_buf_load - load fpga from image in buffer
* @mgr: fpga manager
- * @flags: flags setting fpga confuration modes
+ * @info: fpga image specific information
* @buf: buffer contain fpga image
* @count: byte count of buf
*
* Step the low level fpga manager through the device-specific steps of getting
* an FPGA ready to be configured, writing the image to it, then doing whatever
* post-configuration steps necessary. This code assumes the caller got the
- * mgr pointer from of_fpga_mgr_get() and checked that it is not an error code.
+ * mgr pointer from of_fpga_mgr_get() or fpga_mgr_get() and checked that it is
+ * not an error code.
*
* Return: 0 on success, negative error code otherwise.
*/
-int fpga_mgr_buf_load(struct fpga_manager *mgr, u32 flags, const char *buf,
- size_t count)
+int fpga_mgr_buf_load(struct fpga_manager *mgr, struct fpga_image_info *info,
+ const char *buf, size_t count)
{
struct device *dev = &mgr->dev;
int ret;
@@ -52,10 +53,12 @@ int fpga_mgr_buf_load(struct fpga_manager *mgr, u32 flags, const char *buf,
/*
* Call the low level driver's write_init function. This will do the
* device-specific things to get the FPGA into the state where it is
- * ready to receive an FPGA image.
+ * ready to receive an FPGA image. The low level driver only gets to
+ * see the first initial_header_size bytes in the buffer.
*/
mgr->state = FPGA_MGR_STATE_WRITE_INIT;
- ret = mgr->mops->write_init(mgr, flags, buf, count);
+ ret = mgr->mops->write_init(mgr, info, buf,
+ min(mgr->mops->initial_header_size, count));
if (ret) {
dev_err(dev, "Error preparing FPGA for writing\n");
mgr->state = FPGA_MGR_STATE_WRITE_INIT_ERR;
@@ -78,7 +81,7 @@ int fpga_mgr_buf_load(struct fpga_manager *mgr, u32 flags, const char *buf,
* steps to finish and set the FPGA into operating mode.
*/
mgr->state = FPGA_MGR_STATE_WRITE_COMPLETE;
- ret = mgr->mops->write_complete(mgr, flags);
+ ret = mgr->mops->write_complete(mgr, info);
if (ret) {
dev_err(dev, "Error after writing image data to FPGA\n");
mgr->state = FPGA_MGR_STATE_WRITE_COMPLETE_ERR;
@@ -93,17 +96,19 @@ EXPORT_SYMBOL_GPL(fpga_mgr_buf_load);
/**
* fpga_mgr_firmware_load - request firmware and load to fpga
* @mgr: fpga manager
- * @flags: flags setting fpga confuration modes
+ * @info: fpga image specific information
* @image_name: name of image file on the firmware search path
*
* Request an FPGA image using the firmware class, then write out to the FPGA.
* Update the state before each step to provide info on what step failed if
* there is a failure. This code assumes the caller got the mgr pointer
- * from of_fpga_mgr_get() and checked that it is not an error code.
+ * from of_fpga_mgr_get() or fpga_mgr_get() and checked that it is not an error
+ * code.
*
* Return: 0 on success, negative error code otherwise.
*/
-int fpga_mgr_firmware_load(struct fpga_manager *mgr, u32 flags,
+int fpga_mgr_firmware_load(struct fpga_manager *mgr,
+ struct fpga_image_info *info,
const char *image_name)
{
struct device *dev = &mgr->dev;
@@ -121,7 +126,7 @@ int fpga_mgr_firmware_load(struct fpga_manager *mgr, u32 flags,
return ret;
}
- ret = fpga_mgr_buf_load(mgr, flags, fw->data, fw->size);
+ ret = fpga_mgr_buf_load(mgr, info, fw->data, fw->size);
release_firmware(fw);
@@ -181,30 +186,11 @@ static struct attribute *fpga_mgr_attrs[] = {
};
ATTRIBUTE_GROUPS(fpga_mgr);
-static int fpga_mgr_of_node_match(struct device *dev, const void *data)
-{
- return dev->of_node == data;
-}
-
-/**
- * of_fpga_mgr_get - get an exclusive reference to a fpga mgr
- * @node: device node
- *
- * Given a device node, get an exclusive reference to a fpga mgr.
- *
- * Return: fpga manager struct or IS_ERR() condition containing error code.
- */
-struct fpga_manager *of_fpga_mgr_get(struct device_node *node)
+struct fpga_manager *__fpga_mgr_get(struct device *dev)
{
struct fpga_manager *mgr;
- struct device *dev;
int ret = -ENODEV;
- dev = class_find_device(fpga_mgr_class, NULL, node,
- fpga_mgr_of_node_match);
- if (!dev)
- return ERR_PTR(-ENODEV);
-
mgr = to_fpga_manager(dev);
if (!mgr)
goto err_dev;
@@ -226,6 +212,55 @@ err_dev:
put_device(dev);
return ERR_PTR(ret);
}
+
+static int fpga_mgr_dev_match(struct device *dev, const void *data)
+{
+ return dev->parent == data;
+}
+
+/**
+ * fpga_mgr_get - get an exclusive reference to a fpga mgr
+ * @dev: parent device that fpga mgr was registered with
+ *
+ * Given a device, get an exclusive reference to a fpga mgr.
+ *
+ * Return: fpga manager struct or IS_ERR() condition containing error code.
+ */
+struct fpga_manager *fpga_mgr_get(struct device *dev)
+{
+ struct device *mgr_dev = class_find_device(fpga_mgr_class, NULL, dev,
+ fpga_mgr_dev_match);
+ if (!mgr_dev)
+ return ERR_PTR(-ENODEV);
+
+ return __fpga_mgr_get(mgr_dev);
+}
+EXPORT_SYMBOL_GPL(fpga_mgr_get);
+
+static int fpga_mgr_of_node_match(struct device *dev, const void *data)
+{
+ return dev->of_node == data;
+}
+
+/**
+ * of_fpga_mgr_get - get an exclusive reference to a fpga mgr
+ * @node: device node
+ *
+ * Given a device node, get an exclusive reference to a fpga mgr.
+ *
+ * Return: fpga manager struct or IS_ERR() condition containing error code.
+ */
+struct fpga_manager *of_fpga_mgr_get(struct device_node *node)
+{
+ struct device *dev;
+
+ dev = class_find_device(fpga_mgr_class, NULL, node,
+ fpga_mgr_of_node_match);
+ if (!dev)
+ return ERR_PTR(-ENODEV);
+
+ return __fpga_mgr_get(dev);
+}
EXPORT_SYMBOL_GPL(of_fpga_mgr_get);
/**
diff --git a/drivers/fpga/fpga-region.c b/drivers/fpga/fpga-region.c
new file mode 100644
index 000000000000..3222fdbad75a
--- /dev/null
+++ b/drivers/fpga/fpga-region.c
@@ -0,0 +1,603 @@
+/*
+ * FPGA Region - Device Tree support for FPGA programming under Linux
+ *
+ * Copyright (C) 2013-2016 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/fpga/fpga-bridge.h>
+#include <linux/fpga/fpga-mgr.h>
+#include <linux/idr.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+/**
+ * struct fpga_region - FPGA Region structure
+ * @dev: FPGA Region device
+ * @mutex: enforces exclusive reference to region
+ * @bridge_list: list of FPGA bridges specified in region
+ * @info: fpga image specific information
+ */
+struct fpga_region {
+ struct device dev;
+ struct mutex mutex; /* for exclusive reference to region */
+ struct list_head bridge_list;
+ struct fpga_image_info *info;
+};
+
+#define to_fpga_region(d) container_of(d, struct fpga_region, dev)
+
+static DEFINE_IDA(fpga_region_ida);
+static struct class *fpga_region_class;
+
+static const struct of_device_id fpga_region_of_match[] = {
+ { .compatible = "fpga-region", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, fpga_region_of_match);
+
+static int fpga_region_of_node_match(struct device *dev, const void *data)
+{
+ return dev->of_node == data;
+}
+
+/**
+ * fpga_region_find - find FPGA region
+ * @np: device node of FPGA Region
+ * Caller will need to put_device(&region->dev) when done.
+ * Returns FPGA Region struct or NULL
+ */
+static struct fpga_region *fpga_region_find(struct device_node *np)
+{
+ struct device *dev;
+
+ dev = class_find_device(fpga_region_class, NULL, np,
+ fpga_region_of_node_match);
+ if (!dev)
+ return NULL;
+
+ return to_fpga_region(dev);
+}
+
+/**
+ * fpga_region_get - get an exclusive reference to a fpga region
+ * @region: FPGA Region struct
+ *
+ * Caller should call fpga_region_put() when done with region.
+ *
+ * Return fpga_region struct if successful.
+ * Return -EBUSY if someone already has a reference to the region.
+ * Return -ENODEV if @np is not a FPGA Region.
+ */
+static struct fpga_region *fpga_region_get(struct fpga_region *region)
+{
+ struct device *dev = &region->dev;
+
+ if (!mutex_trylock(&region->mutex)) {
+ dev_dbg(dev, "%s: FPGA Region already in use\n", __func__);
+ return ERR_PTR(-EBUSY);
+ }
+
+ get_device(dev);
+ of_node_get(dev->of_node);
+ if (!try_module_get(dev->parent->driver->owner)) {
+ of_node_put(dev->of_node);
+ put_device(dev);
+ mutex_unlock(&region->mutex);
+ return ERR_PTR(-ENODEV);
+ }
+
+ dev_dbg(&region->dev, "get\n");
+
+ return region;
+}
+
+/**
+ * fpga_region_put - release a reference to a region
+ *
+ * @region: FPGA region
+ */
+static void fpga_region_put(struct fpga_region *region)
+{
+ struct device *dev = &region->dev;
+
+ dev_dbg(&region->dev, "put\n");
+
+ module_put(dev->parent->driver->owner);
+ of_node_put(dev->of_node);
+ put_device(dev);
+ mutex_unlock(&region->mutex);
+}
+
+/**
+ * fpga_region_get_manager - get exclusive reference for FPGA manager
+ * @region: FPGA region
+ *
+ * Get FPGA Manager from "fpga-mgr" property or from ancestor region.
+ *
+ * Caller should call fpga_mgr_put() when done with manager.
+ *
+ * Return: fpga manager struct or IS_ERR() condition containing error code.
+ */
+static struct fpga_manager *fpga_region_get_manager(struct fpga_region *region)
+{
+ struct device *dev = &region->dev;
+ struct device_node *np = dev->of_node;
+ struct device_node *mgr_node;
+ struct fpga_manager *mgr;
+
+ of_node_get(np);
+ while (np) {
+ if (of_device_is_compatible(np, "fpga-region")) {
+ mgr_node = of_parse_phandle(np, "fpga-mgr", 0);
+ if (mgr_node) {
+ mgr = of_fpga_mgr_get(mgr_node);
+ of_node_put(np);
+ return mgr;
+ }
+ }
+ np = of_get_next_parent(np);
+ }
+ of_node_put(np);
+
+ return ERR_PTR(-EINVAL);
+}
+
+/**
+ * fpga_region_get_bridges - create a list of bridges
+ * @region: FPGA region
+ * @overlay: device node of the overlay
+ *
+ * Create a list of bridges including the parent bridge and the bridges
+ * specified by "fpga-bridges" property. Note that the
+ * fpga_bridges_enable/disable/put functions are all fine with an empty list
+ * if that happens.
+ *
+ * Caller should call fpga_bridges_put(&region->bridge_list) when
+ * done with the bridges.
+ *
+ * Return 0 for success (even if there are no bridges specified)
+ * or -EBUSY if any of the bridges are in use.
+ */
+static int fpga_region_get_bridges(struct fpga_region *region,
+ struct device_node *overlay)
+{
+ struct device *dev = &region->dev;
+ struct device_node *region_np = dev->of_node;
+ struct device_node *br, *np, *parent_br = NULL;
+ int i, ret;
+
+ /* If parent is a bridge, add to list */
+ ret = fpga_bridge_get_to_list(region_np->parent, region->info,
+ &region->bridge_list);
+ if (ret == -EBUSY)
+ return ret;
+
+ if (!ret)
+ parent_br = region_np->parent;
+
+ /* If overlay has a list of bridges, use it. */
+ if (of_parse_phandle(overlay, "fpga-bridges", 0))
+ np = overlay;
+ else
+ np = region_np;
+
+ for (i = 0; ; i++) {
+ br = of_parse_phandle(np, "fpga-bridges", i);
+ if (!br)
+ break;
+
+ /* If parent bridge is in list, skip it. */
+ if (br == parent_br)
+ continue;
+
+ /* If node is a bridge, get it and add to list */
+ ret = fpga_bridge_get_to_list(br, region->info,
+ &region->bridge_list);
+
+ /* If any of the bridges are in use, give up */
+ if (ret == -EBUSY) {
+ fpga_bridges_put(&region->bridge_list);
+ return -EBUSY;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * fpga_region_program_fpga - program FPGA
+ * @region: FPGA region
+ * @firmware_name: name of FPGA image firmware file
+ * @overlay: device node of the overlay
+ * Program an FPGA using information in the device tree.
+ * Function assumes that there is a firmware-name property.
+ * Return 0 for success or negative error code.
+ */
+static int fpga_region_program_fpga(struct fpga_region *region,
+ const char *firmware_name,
+ struct device_node *overlay)
+{
+ struct fpga_manager *mgr;
+ int ret;
+
+ region = fpga_region_get(region);
+ if (IS_ERR(region)) {
+ pr_err("failed to get fpga region\n");
+ return PTR_ERR(region);
+ }
+
+ mgr = fpga_region_get_manager(region);
+ if (IS_ERR(mgr)) {
+ pr_err("failed to get fpga region manager\n");
+ return PTR_ERR(mgr);
+ }
+
+ ret = fpga_region_get_bridges(region, overlay);
+ if (ret) {
+ pr_err("failed to get fpga region bridges\n");
+ goto err_put_mgr;
+ }
+
+ ret = fpga_bridges_disable(&region->bridge_list);
+ if (ret) {
+ pr_err("failed to disable region bridges\n");
+ goto err_put_br;
+ }
+
+ ret = fpga_mgr_firmware_load(mgr, region->info, firmware_name);
+ if (ret) {
+ pr_err("failed to load fpga image\n");
+ goto err_put_br;
+ }
+
+ ret = fpga_bridges_enable(&region->bridge_list);
+ if (ret) {
+ pr_err("failed to enable region bridges\n");
+ goto err_put_br;
+ }
+
+ fpga_mgr_put(mgr);
+ fpga_region_put(region);
+
+ return 0;
+
+err_put_br:
+ fpga_bridges_put(&region->bridge_list);
+err_put_mgr:
+ fpga_mgr_put(mgr);
+ fpga_region_put(region);
+
+ return ret;
+}
+
+/**
+ * child_regions_with_firmware
+ * @overlay: device node of the overlay
+ *
+ * If the overlay adds child FPGA regions, they are not allowed to have
+ * firmware-name property.
+ *
+ * Return 0 for OK or -EINVAL if child FPGA region adds firmware-name.
+ */
+static int child_regions_with_firmware(struct device_node *overlay)
+{
+ struct device_node *child_region;
+ const char *child_firmware_name;
+ int ret = 0;
+
+ of_node_get(overlay);
+
+ child_region = of_find_matching_node(overlay, fpga_region_of_match);
+ while (child_region) {
+ if (!of_property_read_string(child_region, "firmware-name",
+ &child_firmware_name)) {
+ ret = -EINVAL;
+ break;
+ }
+ child_region = of_find_matching_node(child_region,
+ fpga_region_of_match);
+ }
+
+ of_node_put(child_region);
+
+ if (ret)
+ pr_err("firmware-name not allowed in child FPGA region: %s",
+ child_region->full_name);
+
+ return ret;
+}
+
+/**
+ * fpga_region_notify_pre_apply - pre-apply overlay notification
+ *
+ * @region: FPGA region that the overlay was applied to
+ * @nd: overlay notification data
+ *
+ * Called after when an overlay targeted to a FPGA Region is about to be
+ * applied. Function will check the properties that will be added to the FPGA
+ * region. If the checks pass, it will program the FPGA.
+ *
+ * The checks are:
+ * The overlay must add either firmware-name or external-fpga-config property
+ * to the FPGA Region.
+ *
+ * firmware-name : program the FPGA
+ * external-fpga-config : FPGA is already programmed
+ *
+ * The overlay can add other FPGA regions, but child FPGA regions cannot have a
+ * firmware-name property since those regions don't exist yet.
+ *
+ * If the overlay that breaks the rules, notifier returns an error and the
+ * overlay is rejected before it goes into the main tree.
+ *
+ * Returns 0 for success or negative error code for failure.
+ */
+static int fpga_region_notify_pre_apply(struct fpga_region *region,
+ struct of_overlay_notify_data *nd)
+{
+ const char *firmware_name = NULL;
+ struct fpga_image_info *info;
+ int ret;
+
+ info = devm_kzalloc(&region->dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ region->info = info;
+
+ /* Reject overlay if child FPGA Regions have firmware-name property */
+ ret = child_regions_with_firmware(nd->overlay);
+ if (ret)
+ return ret;
+
+ /* Read FPGA region properties from the overlay */
+ if (of_property_read_bool(nd->overlay, "partial-fpga-config"))
+ info->flags |= FPGA_MGR_PARTIAL_RECONFIG;
+
+ if (of_property_read_bool(nd->overlay, "external-fpga-config"))
+ info->flags |= FPGA_MGR_EXTERNAL_CONFIG;
+
+ of_property_read_string(nd->overlay, "firmware-name", &firmware_name);
+
+ of_property_read_u32(nd->overlay, "region-unfreeze-timeout-us",
+ &info->enable_timeout_us);
+
+ of_property_read_u32(nd->overlay, "region-freeze-timeout-us",
+ &info->disable_timeout_us);
+
+ /* If FPGA was externally programmed, don't specify firmware */
+ if ((info->flags & FPGA_MGR_EXTERNAL_CONFIG) && firmware_name) {
+ pr_err("error: specified firmware and external-fpga-config");
+ return -EINVAL;
+ }
+
+ /* FPGA is already configured externally. We're done. */
+ if (info->flags & FPGA_MGR_EXTERNAL_CONFIG)
+ return 0;
+
+ /* If we got this far, we should be programming the FPGA */
+ if (!firmware_name) {
+ pr_err("should specify firmware-name or external-fpga-config\n");
+ return -EINVAL;
+ }
+
+ return fpga_region_program_fpga(region, firmware_name, nd->overlay);
+}
+
+/**
+ * fpga_region_notify_post_remove - post-remove overlay notification
+ *
+ * @region: FPGA region that was targeted by the overlay that was removed
+ * @nd: overlay notification data
+ *
+ * Called after an overlay has been removed if the overlay's target was a
+ * FPGA region.
+ */
+static void fpga_region_notify_post_remove(struct fpga_region *region,
+ struct of_overlay_notify_data *nd)
+{
+ fpga_bridges_disable(&region->bridge_list);
+ fpga_bridges_put(&region->bridge_list);
+ devm_kfree(&region->dev, region->info);
+ region->info = NULL;
+}
+
+/**
+ * of_fpga_region_notify - reconfig notifier for dynamic DT changes
+ * @nb: notifier block
+ * @action: notifier action
+ * @arg: reconfig data
+ *
+ * This notifier handles programming a FPGA when a "firmware-name" property is
+ * added to a fpga-region.
+ *
+ * Returns NOTIFY_OK or error if FPGA programming fails.
+ */
+static int of_fpga_region_notify(struct notifier_block *nb,
+ unsigned long action, void *arg)
+{
+ struct of_overlay_notify_data *nd = arg;
+ struct fpga_region *region;
+ int ret;
+
+ switch (action) {
+ case OF_OVERLAY_PRE_APPLY:
+ pr_debug("%s OF_OVERLAY_PRE_APPLY\n", __func__);
+ break;
+ case OF_OVERLAY_POST_APPLY:
+ pr_debug("%s OF_OVERLAY_POST_APPLY\n", __func__);
+ return NOTIFY_OK; /* not for us */
+ case OF_OVERLAY_PRE_REMOVE:
+ pr_debug("%s OF_OVERLAY_PRE_REMOVE\n", __func__);
+ return NOTIFY_OK; /* not for us */
+ case OF_OVERLAY_POST_REMOVE:
+ pr_debug("%s OF_OVERLAY_POST_REMOVE\n", __func__);
+ break;
+ default: /* should not happen */
+ return NOTIFY_OK;
+ }
+
+ region = fpga_region_find(nd->target);
+ if (!region)
+ return NOTIFY_OK;
+
+ ret = 0;
+ switch (action) {
+ case OF_OVERLAY_PRE_APPLY:
+ ret = fpga_region_notify_pre_apply(region, nd);
+ break;
+
+ case OF_OVERLAY_POST_REMOVE:
+ fpga_region_notify_post_remove(region, nd);
+ break;
+ }
+
+ put_device(&region->dev);
+
+ if (ret)
+ return notifier_from_errno(ret);
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block fpga_region_of_nb = {
+ .notifier_call = of_fpga_region_notify,
+};
+
+static int fpga_region_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct fpga_region *region;
+ int id, ret = 0;
+
+ region = kzalloc(sizeof(*region), GFP_KERNEL);
+ if (!region)
+ return -ENOMEM;
+
+ id = ida_simple_get(&fpga_region_ida, 0, 0, GFP_KERNEL);
+ if (id < 0) {
+ ret = id;
+ goto err_kfree;
+ }
+
+ mutex_init(&region->mutex);
+ INIT_LIST_HEAD(&region->bridge_list);
+
+ device_initialize(&region->dev);
+ region->dev.class = fpga_region_class;
+ region->dev.parent = dev;
+ region->dev.of_node = np;
+ region->dev.id = id;
+ dev_set_drvdata(dev, region);
+
+ ret = dev_set_name(&region->dev, "region%d", id);
+ if (ret)
+ goto err_remove;
+
+ ret = device_add(&region->dev);
+ if (ret)
+ goto err_remove;
+
+ of_platform_populate(np, fpga_region_of_match, NULL, &region->dev);
+
+ dev_info(dev, "FPGA Region probed\n");
+
+ return 0;
+
+err_remove:
+ ida_simple_remove(&fpga_region_ida, id);
+err_kfree:
+ kfree(region);
+
+ return ret;
+}
+
+static int fpga_region_remove(struct platform_device *pdev)
+{
+ struct fpga_region *region = platform_get_drvdata(pdev);
+
+ device_unregister(&region->dev);
+
+ return 0;
+}
+
+static struct platform_driver fpga_region_driver = {
+ .probe = fpga_region_probe,
+ .remove = fpga_region_remove,
+ .driver = {
+ .name = "fpga-region",
+ .of_match_table = of_match_ptr(fpga_region_of_match),
+ },
+};
+
+static void fpga_region_dev_release(struct device *dev)
+{
+ struct fpga_region *region = to_fpga_region(dev);
+
+ ida_simple_remove(&fpga_region_ida, region->dev.id);
+ kfree(region);
+}
+
+/**
+ * fpga_region_init - init function for fpga_region class
+ * Creates the fpga_region class and registers a reconfig notifier.
+ */
+static int __init fpga_region_init(void)
+{
+ int ret;
+
+ fpga_region_class = class_create(THIS_MODULE, "fpga_region");
+ if (IS_ERR(fpga_region_class))
+ return PTR_ERR(fpga_region_class);
+
+ fpga_region_class->dev_release = fpga_region_dev_release;
+
+ ret = of_overlay_notifier_register(&fpga_region_of_nb);
+ if (ret)
+ goto err_class;
+
+ ret = platform_driver_register(&fpga_region_driver);
+ if (ret)
+ goto err_plat;
+
+ return 0;
+
+err_plat:
+ of_overlay_notifier_unregister(&fpga_region_of_nb);
+err_class:
+ class_destroy(fpga_region_class);
+ ida_destroy(&fpga_region_ida);
+ return ret;
+}
+
+static void __exit fpga_region_exit(void)
+{
+ platform_driver_unregister(&fpga_region_driver);
+ of_overlay_notifier_unregister(&fpga_region_of_nb);
+ class_destroy(fpga_region_class);
+ ida_destroy(&fpga_region_ida);
+}
+
+subsys_initcall(fpga_region_init);
+module_exit(fpga_region_exit);
+
+MODULE_DESCRIPTION("FPGA Region");
+MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/fpga/socfpga-a10.c b/drivers/fpga/socfpga-a10.c
new file mode 100644
index 000000000000..f8770af0f6b5
--- /dev/null
+++ b/drivers/fpga/socfpga-a10.c
@@ -0,0 +1,557 @@
+/*
+ * FPGA Manager Driver for Altera Arria10 SoCFPGA
+ *
+ * Copyright (C) 2015-2016 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/fpga/fpga-mgr.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+
+#define A10_FPGAMGR_DCLKCNT_OFST 0x08
+#define A10_FPGAMGR_DCLKSTAT_OFST 0x0c
+#define A10_FPGAMGR_IMGCFG_CTL_00_OFST 0x70
+#define A10_FPGAMGR_IMGCFG_CTL_01_OFST 0x74
+#define A10_FPGAMGR_IMGCFG_CTL_02_OFST 0x78
+#define A10_FPGAMGR_IMGCFG_STAT_OFST 0x80
+
+#define A10_FPGAMGR_DCLKSTAT_DCLKDONE BIT(0)
+
+#define A10_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_NCONFIG BIT(0)
+#define A10_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_NSTATUS BIT(1)
+#define A10_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_CONDONE BIT(2)
+#define A10_FPGAMGR_IMGCFG_CTL_00_S2F_NCONFIG BIT(8)
+#define A10_FPGAMGR_IMGCFG_CTL_00_S2F_NSTATUS_OE BIT(16)
+#define A10_FPGAMGR_IMGCFG_CTL_00_S2F_CONDONE_OE BIT(24)
+
+#define A10_FPGAMGR_IMGCFG_CTL_01_S2F_NENABLE_CONFIG BIT(0)
+#define A10_FPGAMGR_IMGCFG_CTL_01_S2F_PR_REQUEST BIT(16)
+#define A10_FPGAMGR_IMGCFG_CTL_01_S2F_NCE BIT(24)
+
+#define A10_FPGAMGR_IMGCFG_CTL_02_EN_CFG_CTRL BIT(0)
+#define A10_FPGAMGR_IMGCFG_CTL_02_CDRATIO_MASK (BIT(16) | BIT(17))
+#define A10_FPGAMGR_IMGCFG_CTL_02_CDRATIO_SHIFT 16
+#define A10_FPGAMGR_IMGCFG_CTL_02_CFGWIDTH BIT(24)
+#define A10_FPGAMGR_IMGCFG_CTL_02_CFGWIDTH_SHIFT 24
+
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_CRC_ERROR BIT(0)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_EARLY_USERMODE BIT(1)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_USERMODE BIT(2)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN BIT(4)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_CONDONE_PIN BIT(6)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_PR_READY BIT(9)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_PR_DONE BIT(10)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_PR_ERROR BIT(11)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_NCONFIG_PIN BIT(12)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_MSEL_MASK (BIT(16) | BIT(17) | BIT(18))
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_MSEL_SHIFT 16
+
+/* FPGA CD Ratio Value */
+#define CDRATIO_x1 0x0
+#define CDRATIO_x2 0x1
+#define CDRATIO_x4 0x2
+#define CDRATIO_x8 0x3
+
+/* Configuration width 16/32 bit */
+#define CFGWDTH_32 1
+#define CFGWDTH_16 0
+
+/*
+ * struct a10_fpga_priv - private data for fpga manager
+ * @regmap: regmap for register access
+ * @fpga_data_addr: iomap for single address data register to FPGA
+ * @clk: clock
+ */
+struct a10_fpga_priv {
+ struct regmap *regmap;
+ void __iomem *fpga_data_addr;
+ struct clk *clk;
+};
+
+static bool socfpga_a10_fpga_writeable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case A10_FPGAMGR_DCLKCNT_OFST:
+ case A10_FPGAMGR_DCLKSTAT_OFST:
+ case A10_FPGAMGR_IMGCFG_CTL_00_OFST:
+ case A10_FPGAMGR_IMGCFG_CTL_01_OFST:
+ case A10_FPGAMGR_IMGCFG_CTL_02_OFST:
+ return true;
+ }
+ return false;
+}
+
+static bool socfpga_a10_fpga_readable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case A10_FPGAMGR_DCLKCNT_OFST:
+ case A10_FPGAMGR_DCLKSTAT_OFST:
+ case A10_FPGAMGR_IMGCFG_CTL_00_OFST:
+ case A10_FPGAMGR_IMGCFG_CTL_01_OFST:
+ case A10_FPGAMGR_IMGCFG_CTL_02_OFST:
+ case A10_FPGAMGR_IMGCFG_STAT_OFST:
+ return true;
+ }
+ return false;
+}
+
+static const struct regmap_config socfpga_a10_fpga_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .writeable_reg = socfpga_a10_fpga_writeable_reg,
+ .readable_reg = socfpga_a10_fpga_readable_reg,
+ .max_register = A10_FPGAMGR_IMGCFG_STAT_OFST,
+ .cache_type = REGCACHE_NONE,
+};
+
+/*
+ * from the register map description of cdratio in imgcfg_ctrl_02:
+ * Normal Configuration : 32bit Passive Parallel
+ * Partial Reconfiguration : 16bit Passive Parallel
+ */
+static void socfpga_a10_fpga_set_cfg_width(struct a10_fpga_priv *priv,
+ int width)
+{
+ width <<= A10_FPGAMGR_IMGCFG_CTL_02_CFGWIDTH_SHIFT;
+
+ regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_02_OFST,
+ A10_FPGAMGR_IMGCFG_CTL_02_CFGWIDTH, width);
+}
+
+static void socfpga_a10_fpga_generate_dclks(struct a10_fpga_priv *priv,
+ u32 count)
+{
+ u32 val;
+
+ /* Clear any existing DONE status. */
+ regmap_write(priv->regmap, A10_FPGAMGR_DCLKSTAT_OFST,
+ A10_FPGAMGR_DCLKSTAT_DCLKDONE);
+
+ /* Issue the DCLK regmap. */
+ regmap_write(priv->regmap, A10_FPGAMGR_DCLKCNT_OFST, count);
+
+ /* wait till the dclkcnt done */
+ regmap_read_poll_timeout(priv->regmap, A10_FPGAMGR_DCLKSTAT_OFST, val,
+ val, 1, 100);
+
+ /* Clear DONE status. */
+ regmap_write(priv->regmap, A10_FPGAMGR_DCLKSTAT_OFST,
+ A10_FPGAMGR_DCLKSTAT_DCLKDONE);
+}
+
+#define RBF_ENCRYPTION_MODE_OFFSET 69
+#define RBF_DECOMPRESS_OFFSET 229
+
+static int socfpga_a10_fpga_encrypted(u32 *buf32, size_t buf32_size)
+{
+ if (buf32_size < RBF_ENCRYPTION_MODE_OFFSET + 1)
+ return -EINVAL;
+
+ /* Is the bitstream encrypted? */
+ return ((buf32[RBF_ENCRYPTION_MODE_OFFSET] >> 2) & 3) != 0;
+}
+
+static int socfpga_a10_fpga_compressed(u32 *buf32, size_t buf32_size)
+{
+ if (buf32_size < RBF_DECOMPRESS_OFFSET + 1)
+ return -EINVAL;
+
+ /* Is the bitstream compressed? */
+ return !((buf32[RBF_DECOMPRESS_OFFSET] >> 1) & 1);
+}
+
+static unsigned int socfpga_a10_fpga_get_cd_ratio(unsigned int cfg_width,
+ bool encrypt, bool compress)
+{
+ unsigned int cd_ratio;
+
+ /*
+ * cd ratio is dependent on cfg width and whether the bitstream
+ * is encrypted and/or compressed.
+ *
+ * | width | encr. | compr. | cd ratio |
+ * | 16 | 0 | 0 | 1 |
+ * | 16 | 0 | 1 | 4 |
+ * | 16 | 1 | 0 | 2 |
+ * | 16 | 1 | 1 | 4 |
+ * | 32 | 0 | 0 | 1 |
+ * | 32 | 0 | 1 | 8 |
+ * | 32 | 1 | 0 | 4 |
+ * | 32 | 1 | 1 | 8 |
+ */
+ if (!compress && !encrypt)
+ return CDRATIO_x1;
+
+ if (compress)
+ cd_ratio = CDRATIO_x4;
+ else
+ cd_ratio = CDRATIO_x2;
+
+ /* If 32 bit, double the cd ratio by incrementing the field */
+ if (cfg_width == CFGWDTH_32)
+ cd_ratio += 1;
+
+ return cd_ratio;
+}
+
+static int socfpga_a10_fpga_set_cdratio(struct fpga_manager *mgr,
+ unsigned int cfg_width,
+ const char *buf, size_t count)
+{
+ struct a10_fpga_priv *priv = mgr->priv;
+ unsigned int cd_ratio;
+ int encrypt, compress;
+
+ encrypt = socfpga_a10_fpga_encrypted((u32 *)buf, count / 4);
+ if (encrypt < 0)
+ return -EINVAL;
+
+ compress = socfpga_a10_fpga_compressed((u32 *)buf, count / 4);
+ if (compress < 0)
+ return -EINVAL;
+
+ cd_ratio = socfpga_a10_fpga_get_cd_ratio(cfg_width, encrypt, compress);
+
+ regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_02_OFST,
+ A10_FPGAMGR_IMGCFG_CTL_02_CDRATIO_MASK,
+ cd_ratio << A10_FPGAMGR_IMGCFG_CTL_02_CDRATIO_SHIFT);
+
+ return 0;
+}
+
+static u32 socfpga_a10_fpga_read_stat(struct a10_fpga_priv *priv)
+{
+ u32 val;
+
+ regmap_read(priv->regmap, A10_FPGAMGR_IMGCFG_STAT_OFST, &val);
+
+ return val;
+}
+
+static int socfpga_a10_fpga_wait_for_pr_ready(struct a10_fpga_priv *priv)
+{
+ u32 reg, i;
+
+ for (i = 0; i < 10 ; i++) {
+ reg = socfpga_a10_fpga_read_stat(priv);
+
+ if (reg & A10_FPGAMGR_IMGCFG_STAT_F2S_PR_ERROR)
+ return -EINVAL;
+
+ if (reg & A10_FPGAMGR_IMGCFG_STAT_F2S_PR_READY)
+ return 0;
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int socfpga_a10_fpga_wait_for_pr_done(struct a10_fpga_priv *priv)
+{
+ u32 reg, i;
+
+ for (i = 0; i < 10 ; i++) {
+ reg = socfpga_a10_fpga_read_stat(priv);
+
+ if (reg & A10_FPGAMGR_IMGCFG_STAT_F2S_PR_ERROR)
+ return -EINVAL;
+
+ if (reg & A10_FPGAMGR_IMGCFG_STAT_F2S_PR_DONE)
+ return 0;
+ }
+
+ return -ETIMEDOUT;
+}
+
+/* Start the FPGA programming by initialize the FPGA Manager */
+static int socfpga_a10_fpga_write_init(struct fpga_manager *mgr,
+ struct fpga_image_info *info,
+ const char *buf, size_t count)
+{
+ struct a10_fpga_priv *priv = mgr->priv;
+ unsigned int cfg_width;
+ u32 msel, stat, mask;
+ int ret;
+
+ if (info->flags & FPGA_MGR_PARTIAL_RECONFIG)
+ cfg_width = CFGWDTH_16;
+ else
+ return -EINVAL;
+
+ /* Check for passive parallel (msel == 000 or 001) */
+ msel = socfpga_a10_fpga_read_stat(priv);
+ msel &= A10_FPGAMGR_IMGCFG_STAT_F2S_MSEL_MASK;
+ msel >>= A10_FPGAMGR_IMGCFG_STAT_F2S_MSEL_SHIFT;
+ if ((msel != 0) && (msel != 1)) {
+ dev_dbg(&mgr->dev, "Fail: invalid msel=%d\n", msel);
+ return -EINVAL;
+ }
+
+ /* Make sure no external devices are interfering */
+ stat = socfpga_a10_fpga_read_stat(priv);
+ mask = A10_FPGAMGR_IMGCFG_STAT_F2S_NCONFIG_PIN |
+ A10_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN;
+ if ((stat & mask) != mask)
+ return -EINVAL;
+
+ /* Set cfg width */
+ socfpga_a10_fpga_set_cfg_width(priv, cfg_width);
+
+ /* Determine cd ratio from bitstream header and set cd ratio */
+ ret = socfpga_a10_fpga_set_cdratio(mgr, cfg_width, buf, count);
+ if (ret)
+ return ret;
+
+ /*
+ * Clear s2f_nce to enable chip select. Leave pr_request
+ * unasserted and override disabled.
+ */
+ regmap_write(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_01_OFST,
+ A10_FPGAMGR_IMGCFG_CTL_01_S2F_NENABLE_CONFIG);
+
+ /* Set cfg_ctrl to enable s2f dclk and data */
+ regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_02_OFST,
+ A10_FPGAMGR_IMGCFG_CTL_02_EN_CFG_CTRL,
+ A10_FPGAMGR_IMGCFG_CTL_02_EN_CFG_CTRL);
+
+ /*
+ * Disable overrides not needed for pr.
+ * s2f_config==1 leaves reset deasseted.
+ */
+ regmap_write(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_00_OFST,
+ A10_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_NCONFIG |
+ A10_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_NSTATUS |
+ A10_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_CONDONE |
+ A10_FPGAMGR_IMGCFG_CTL_00_S2F_NCONFIG);
+
+ /* Enable override for data, dclk, nce, and pr_request to CSS */
+ regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_01_OFST,
+ A10_FPGAMGR_IMGCFG_CTL_01_S2F_NENABLE_CONFIG, 0);
+
+ /* Send some clocks to clear out any errors */
+ socfpga_a10_fpga_generate_dclks(priv, 256);
+
+ /* Assert pr_request */
+ regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_01_OFST,
+ A10_FPGAMGR_IMGCFG_CTL_01_S2F_PR_REQUEST,
+ A10_FPGAMGR_IMGCFG_CTL_01_S2F_PR_REQUEST);
+
+ /* Provide 2048 DCLKs before starting the config data streaming. */
+ socfpga_a10_fpga_generate_dclks(priv, 0x7ff);
+
+ /* Wait for pr_ready */
+ return socfpga_a10_fpga_wait_for_pr_ready(priv);
+}
+
+/*
+ * write data to the FPGA data register
+ */
+static int socfpga_a10_fpga_write(struct fpga_manager *mgr, const char *buf,
+ size_t count)
+{
+ struct a10_fpga_priv *priv = mgr->priv;
+ u32 *buffer_32 = (u32 *)buf;
+ size_t i = 0;
+
+ if (count <= 0)
+ return -EINVAL;
+
+ /* Write out the complete 32-bit chunks */
+ while (count >= sizeof(u32)) {
+ writel(buffer_32[i++], priv->fpga_data_addr);
+ count -= sizeof(u32);
+ }
+
+ /* Write out remaining non 32-bit chunks */
+ switch (count) {
+ case 3:
+ writel(buffer_32[i++] & 0x00ffffff, priv->fpga_data_addr);
+ break;
+ case 2:
+ writel(buffer_32[i++] & 0x0000ffff, priv->fpga_data_addr);
+ break;
+ case 1:
+ writel(buffer_32[i++] & 0x000000ff, priv->fpga_data_addr);
+ break;
+ case 0:
+ break;
+ default:
+ /* This will never happen */
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+static int socfpga_a10_fpga_write_complete(struct fpga_manager *mgr,
+ struct fpga_image_info *info)
+{
+ struct a10_fpga_priv *priv = mgr->priv;
+ u32 reg;
+ int ret;
+
+ /* Wait for pr_done */
+ ret = socfpga_a10_fpga_wait_for_pr_done(priv);
+
+ /* Clear pr_request */
+ regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_01_OFST,
+ A10_FPGAMGR_IMGCFG_CTL_01_S2F_PR_REQUEST, 0);
+
+ /* Send some clocks to clear out any errors */
+ socfpga_a10_fpga_generate_dclks(priv, 256);
+
+ /* Disable s2f dclk and data */
+ regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_02_OFST,
+ A10_FPGAMGR_IMGCFG_CTL_02_EN_CFG_CTRL, 0);
+
+ /* Deassert chip select */
+ regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_01_OFST,
+ A10_FPGAMGR_IMGCFG_CTL_01_S2F_NCE,
+ A10_FPGAMGR_IMGCFG_CTL_01_S2F_NCE);
+
+ /* Disable data, dclk, nce, and pr_request override to CSS */
+ regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_01_OFST,
+ A10_FPGAMGR_IMGCFG_CTL_01_S2F_NENABLE_CONFIG,
+ A10_FPGAMGR_IMGCFG_CTL_01_S2F_NENABLE_CONFIG);
+
+ /* Return any errors regarding pr_done or pr_error */
+ if (ret)
+ return ret;
+
+ /* Final check */
+ reg = socfpga_a10_fpga_read_stat(priv);
+
+ if (((reg & A10_FPGAMGR_IMGCFG_STAT_F2S_USERMODE) == 0) ||
+ ((reg & A10_FPGAMGR_IMGCFG_STAT_F2S_CONDONE_PIN) == 0) ||
+ ((reg & A10_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN) == 0)) {
+ dev_dbg(&mgr->dev,
+ "Timeout in final check. Status=%08xf\n", reg);
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static enum fpga_mgr_states socfpga_a10_fpga_state(struct fpga_manager *mgr)
+{
+ struct a10_fpga_priv *priv = mgr->priv;
+ u32 reg = socfpga_a10_fpga_read_stat(priv);
+
+ if (reg & A10_FPGAMGR_IMGCFG_STAT_F2S_USERMODE)
+ return FPGA_MGR_STATE_OPERATING;
+
+ if (reg & A10_FPGAMGR_IMGCFG_STAT_F2S_PR_READY)
+ return FPGA_MGR_STATE_WRITE;
+
+ if (reg & A10_FPGAMGR_IMGCFG_STAT_F2S_CRC_ERROR)
+ return FPGA_MGR_STATE_WRITE_COMPLETE_ERR;
+
+ if ((reg & A10_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN) == 0)
+ return FPGA_MGR_STATE_RESET;
+
+ return FPGA_MGR_STATE_UNKNOWN;
+}
+
+static const struct fpga_manager_ops socfpga_a10_fpga_mgr_ops = {
+ .initial_header_size = (RBF_DECOMPRESS_OFFSET + 1) * 4,
+ .state = socfpga_a10_fpga_state,
+ .write_init = socfpga_a10_fpga_write_init,
+ .write = socfpga_a10_fpga_write,
+ .write_complete = socfpga_a10_fpga_write_complete,
+};
+
+static int socfpga_a10_fpga_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct a10_fpga_priv *priv;
+ void __iomem *reg_base;
+ struct resource *res;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ /* First mmio base is for register access */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ reg_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(reg_base))
+ return PTR_ERR(reg_base);
+
+ /* Second mmio base is for writing FPGA image data */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ priv->fpga_data_addr = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->fpga_data_addr))
+ return PTR_ERR(priv->fpga_data_addr);
+
+ /* regmap for register access */
+ priv->regmap = devm_regmap_init_mmio(dev, reg_base,
+ &socfpga_a10_fpga_regmap_config);
+ if (IS_ERR(priv->regmap))
+ return -ENODEV;
+
+ priv->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(priv->clk)) {
+ dev_err(dev, "no clock specified\n");
+ return PTR_ERR(priv->clk);
+ }
+
+ ret = clk_prepare_enable(priv->clk);
+ if (ret) {
+ dev_err(dev, "could not enable clock\n");
+ return -EBUSY;
+ }
+
+ return fpga_mgr_register(dev, "SoCFPGA Arria10 FPGA Manager",
+ &socfpga_a10_fpga_mgr_ops, priv);
+}
+
+static int socfpga_a10_fpga_remove(struct platform_device *pdev)
+{
+ struct fpga_manager *mgr = platform_get_drvdata(pdev);
+ struct a10_fpga_priv *priv = mgr->priv;
+
+ fpga_mgr_unregister(&pdev->dev);
+ clk_disable_unprepare(priv->clk);
+
+ return 0;
+}
+
+static const struct of_device_id socfpga_a10_fpga_of_match[] = {
+ { .compatible = "altr,socfpga-a10-fpga-mgr", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, socfpga_a10_fpga_of_match);
+
+static struct platform_driver socfpga_a10_fpga_driver = {
+ .probe = socfpga_a10_fpga_probe,
+ .remove = socfpga_a10_fpga_remove,
+ .driver = {
+ .name = "socfpga_a10_fpga_manager",
+ .of_match_table = socfpga_a10_fpga_of_match,
+ },
+};
+
+module_platform_driver(socfpga_a10_fpga_driver);
+
+MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>");
+MODULE_DESCRIPTION("SoCFPGA Arria10 FPGA Manager");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/fpga/socfpga.c b/drivers/fpga/socfpga.c
index 27d2ff28132c..b6672e66cda6 100644
--- a/drivers/fpga/socfpga.c
+++ b/drivers/fpga/socfpga.c
@@ -407,13 +407,14 @@ static int socfpga_fpga_reset(struct fpga_manager *mgr)
/*
* Prepare the FPGA to receive the configuration data.
*/
-static int socfpga_fpga_ops_configure_init(struct fpga_manager *mgr, u32 flags,
+static int socfpga_fpga_ops_configure_init(struct fpga_manager *mgr,
+ struct fpga_image_info *info,
const char *buf, size_t count)
{
struct socfpga_fpga_priv *priv = mgr->priv;
int ret;
- if (flags & FPGA_MGR_PARTIAL_RECONFIG) {
+ if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) {
dev_err(&mgr->dev, "Partial reconfiguration not supported.\n");
return -EINVAL;
}
@@ -478,7 +479,7 @@ static int socfpga_fpga_ops_configure_write(struct fpga_manager *mgr,
}
static int socfpga_fpga_ops_configure_complete(struct fpga_manager *mgr,
- u32 flags)
+ struct fpga_image_info *info)
{
struct socfpga_fpga_priv *priv = mgr->priv;
u32 status;
diff --git a/drivers/fpga/zynq-fpga.c b/drivers/fpga/zynq-fpga.c
index c2fb4120bd62..1812bf7614e1 100644
--- a/drivers/fpga/zynq-fpga.c
+++ b/drivers/fpga/zynq-fpga.c
@@ -118,7 +118,6 @@
#define FPGA_RST_NONE_MASK 0x0
struct zynq_fpga_priv {
- struct device *dev;
int irq;
struct clk *clk;
@@ -175,7 +174,8 @@ static irqreturn_t zynq_fpga_isr(int irq, void *data)
return IRQ_HANDLED;
}
-static int zynq_fpga_ops_write_init(struct fpga_manager *mgr, u32 flags,
+static int zynq_fpga_ops_write_init(struct fpga_manager *mgr,
+ struct fpga_image_info *info,
const char *buf, size_t count)
{
struct zynq_fpga_priv *priv;
@@ -189,7 +189,7 @@ static int zynq_fpga_ops_write_init(struct fpga_manager *mgr, u32 flags,
return err;
/* don't globally reset PL if we're doing partial reconfig */
- if (!(flags & FPGA_MGR_PARTIAL_RECONFIG)) {
+ if (!(info->flags & FPGA_MGR_PARTIAL_RECONFIG)) {
/* assert AXI interface resets */
regmap_write(priv->slcr, SLCR_FPGA_RST_CTRL_OFFSET,
FPGA_RST_ALL_MASK);
@@ -217,7 +217,7 @@ static int zynq_fpga_ops_write_init(struct fpga_manager *mgr, u32 flags,
INIT_POLL_DELAY,
INIT_POLL_TIMEOUT);
if (err) {
- dev_err(priv->dev, "Timeout waiting for PCFG_INIT");
+ dev_err(&mgr->dev, "Timeout waiting for PCFG_INIT\n");
goto out_err;
}
@@ -231,7 +231,7 @@ static int zynq_fpga_ops_write_init(struct fpga_manager *mgr, u32 flags,
INIT_POLL_DELAY,
INIT_POLL_TIMEOUT);
if (err) {
- dev_err(priv->dev, "Timeout waiting for !PCFG_INIT");
+ dev_err(&mgr->dev, "Timeout waiting for !PCFG_INIT\n");
goto out_err;
}
@@ -245,7 +245,7 @@ static int zynq_fpga_ops_write_init(struct fpga_manager *mgr, u32 flags,
INIT_POLL_DELAY,
INIT_POLL_TIMEOUT);
if (err) {
- dev_err(priv->dev, "Timeout waiting for PCFG_INIT");
+ dev_err(&mgr->dev, "Timeout waiting for PCFG_INIT\n");
goto out_err;
}
}
@@ -262,7 +262,7 @@ static int zynq_fpga_ops_write_init(struct fpga_manager *mgr, u32 flags,
/* check that we have room in the command queue */
status = zynq_fpga_read(priv, STATUS_OFFSET);
if (status & STATUS_DMA_Q_F) {
- dev_err(priv->dev, "DMA command queue full");
+ dev_err(&mgr->dev, "DMA command queue full\n");
err = -EBUSY;
goto out_err;
}
@@ -295,7 +295,8 @@ static int zynq_fpga_ops_write(struct fpga_manager *mgr,
in_count = count;
priv = mgr->priv;
- kbuf = dma_alloc_coherent(priv->dev, count, &dma_addr, GFP_KERNEL);
+ kbuf =
+ dma_alloc_coherent(mgr->dev.parent, count, &dma_addr, GFP_KERNEL);
if (!kbuf)
return -ENOMEM;
@@ -331,19 +332,19 @@ static int zynq_fpga_ops_write(struct fpga_manager *mgr,
zynq_fpga_write(priv, INT_STS_OFFSET, intr_status);
if (!((intr_status & IXR_D_P_DONE_MASK) == IXR_D_P_DONE_MASK)) {
- dev_err(priv->dev, "Error configuring FPGA");
+ dev_err(&mgr->dev, "Error configuring FPGA\n");
err = -EFAULT;
}
clk_disable(priv->clk);
out_free:
- dma_free_coherent(priv->dev, in_count, kbuf, dma_addr);
-
+ dma_free_coherent(mgr->dev.parent, count, kbuf, dma_addr);
return err;
}
-static int zynq_fpga_ops_write_complete(struct fpga_manager *mgr, u32 flags)
+static int zynq_fpga_ops_write_complete(struct fpga_manager *mgr,
+ struct fpga_image_info *info)
{
struct zynq_fpga_priv *priv = mgr->priv;
int err;
@@ -364,7 +365,7 @@ static int zynq_fpga_ops_write_complete(struct fpga_manager *mgr, u32 flags)
return err;
/* for the partial reconfig case we didn't touch the level shifters */
- if (!(flags & FPGA_MGR_PARTIAL_RECONFIG)) {
+ if (!(info->flags & FPGA_MGR_PARTIAL_RECONFIG)) {
/* enable level shifters from PL to PS */
regmap_write(priv->slcr, SLCR_LVL_SHFTR_EN_OFFSET,
LVL_SHFTR_ENABLE_PL_TO_PS);
@@ -416,8 +417,6 @@ static int zynq_fpga_probe(struct platform_device *pdev)
if (!priv)
return -ENOMEM;
- priv->dev = dev;
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
priv->io_base = devm_ioremap_resource(dev, res);
if (IS_ERR(priv->io_base))
@@ -426,7 +425,7 @@ static int zynq_fpga_probe(struct platform_device *pdev)
priv->slcr = syscon_regmap_lookup_by_phandle(dev->of_node,
"syscon");
if (IS_ERR(priv->slcr)) {
- dev_err(dev, "unable to get zynq-slcr regmap");
+ dev_err(dev, "unable to get zynq-slcr regmap\n");
return PTR_ERR(priv->slcr);
}
@@ -434,38 +433,41 @@ static int zynq_fpga_probe(struct platform_device *pdev)
priv->irq = platform_get_irq(pdev, 0);
if (priv->irq < 0) {
- dev_err(dev, "No IRQ available");
+ dev_err(dev, "No IRQ available\n");
return priv->irq;
}
- err = devm_request_irq(dev, priv->irq, zynq_fpga_isr, 0,
- dev_name(dev), priv);
- if (err) {
- dev_err(dev, "unable to request IRQ");
- return err;
- }
-
priv->clk = devm_clk_get(dev, "ref_clk");
if (IS_ERR(priv->clk)) {
- dev_err(dev, "input clock not found");
+ dev_err(dev, "input clock not found\n");
return PTR_ERR(priv->clk);
}
err = clk_prepare_enable(priv->clk);
if (err) {
- dev_err(dev, "unable to enable clock");
+ dev_err(dev, "unable to enable clock\n");
return err;
}
/* unlock the device */
zynq_fpga_write(priv, UNLOCK_OFFSET, UNLOCK_MASK);
+ zynq_fpga_write(priv, INT_MASK_OFFSET, 0xFFFFFFFF);
+ zynq_fpga_write(priv, INT_STS_OFFSET, IXR_ALL_MASK);
+ err = devm_request_irq(dev, priv->irq, zynq_fpga_isr, 0, dev_name(dev),
+ priv);
+ if (err) {
+ dev_err(dev, "unable to request IRQ\n");
+ clk_disable_unprepare(priv->clk);
+ return err;
+ }
+
clk_disable(priv->clk);
err = fpga_mgr_register(dev, "Xilinx Zynq FPGA Manager",
&zynq_fpga_ops, priv);
if (err) {
- dev_err(dev, "unable to register FPGA manager");
+ dev_err(dev, "unable to register FPGA manager\n");
clk_unprepare(priv->clk);
return err;
}
diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c
index 16f91c8490fe..5fb4c6d9209b 100644
--- a/drivers/hv/channel.c
+++ b/drivers/hv/channel.c
@@ -39,7 +39,7 @@
* vmbus_setevent- Trigger an event notification on the specified
* channel.
*/
-static void vmbus_setevent(struct vmbus_channel *channel)
+void vmbus_setevent(struct vmbus_channel *channel)
{
struct hv_monitor_page *monitorpage;
@@ -65,6 +65,7 @@ static void vmbus_setevent(struct vmbus_channel *channel)
vmbus_set_event(channel);
}
}
+EXPORT_SYMBOL_GPL(vmbus_setevent);
/*
* vmbus_open - Open the specified channel.
@@ -635,8 +636,6 @@ int vmbus_sendpacket_ctl(struct vmbus_channel *channel, void *buffer,
u32 packetlen_aligned = ALIGN(packetlen, sizeof(u64));
struct kvec bufferlist[3];
u64 aligned_data = 0;
- int ret;
- bool signal = false;
bool lock = channel->acquire_ring_lock;
int num_vecs = ((bufferlen != 0) ? 3 : 1);
@@ -656,33 +655,9 @@ int vmbus_sendpacket_ctl(struct vmbus_channel *channel, void *buffer,
bufferlist[2].iov_base = &aligned_data;
bufferlist[2].iov_len = (packetlen_aligned - packetlen);
- ret = hv_ringbuffer_write(&channel->outbound, bufferlist, num_vecs,
- &signal, lock, channel->signal_policy);
-
- /*
- * Signalling the host is conditional on many factors:
- * 1. The ring state changed from being empty to non-empty.
- * This is tracked by the variable "signal".
- * 2. The variable kick_q tracks if more data will be placed
- * on the ring. We will not signal if more data is
- * to be placed.
- *
- * Based on the channel signal state, we will decide
- * which signaling policy will be applied.
- *
- * If we cannot write to the ring-buffer; signal the host
- * even if we may not have written anything. This is a rare
- * enough condition that it should not matter.
- * NOTE: in this case, the hvsock channel is an exception, because
- * it looks the host side's hvsock implementation has a throttling
- * mechanism which can hurt the performance otherwise.
- */
-
- if (((ret == 0) && kick_q && signal) ||
- (ret && !is_hvsock_channel(channel)))
- vmbus_setevent(channel);
+ return hv_ringbuffer_write(channel, bufferlist, num_vecs,
+ lock, kick_q);
- return ret;
}
EXPORT_SYMBOL(vmbus_sendpacket_ctl);
@@ -723,7 +698,6 @@ int vmbus_sendpacket_pagebuffer_ctl(struct vmbus_channel *channel,
u32 flags,
bool kick_q)
{
- int ret;
int i;
struct vmbus_channel_packet_page_buffer desc;
u32 descsize;
@@ -731,7 +705,6 @@ int vmbus_sendpacket_pagebuffer_ctl(struct vmbus_channel *channel,
u32 packetlen_aligned;
struct kvec bufferlist[3];
u64 aligned_data = 0;
- bool signal = false;
bool lock = channel->acquire_ring_lock;
if (pagecount > MAX_PAGE_BUFFER_COUNT)
@@ -769,29 +742,8 @@ int vmbus_sendpacket_pagebuffer_ctl(struct vmbus_channel *channel,
bufferlist[2].iov_base = &aligned_data;
bufferlist[2].iov_len = (packetlen_aligned - packetlen);
- ret = hv_ringbuffer_write(&channel->outbound, bufferlist, 3,
- &signal, lock, channel->signal_policy);
-
- /*
- * Signalling the host is conditional on many factors:
- * 1. The ring state changed from being empty to non-empty.
- * This is tracked by the variable "signal".
- * 2. The variable kick_q tracks if more data will be placed
- * on the ring. We will not signal if more data is
- * to be placed.
- *
- * Based on the channel signal state, we will decide
- * which signaling policy will be applied.
- *
- * If we cannot write to the ring-buffer; signal the host
- * even if we may not have written anything. This is a rare
- * enough condition that it should not matter.
- */
-
- if (((ret == 0) && kick_q && signal) || (ret))
- vmbus_setevent(channel);
-
- return ret;
+ return hv_ringbuffer_write(channel, bufferlist, 3,
+ lock, kick_q);
}
EXPORT_SYMBOL_GPL(vmbus_sendpacket_pagebuffer_ctl);
@@ -822,12 +774,10 @@ int vmbus_sendpacket_mpb_desc(struct vmbus_channel *channel,
u32 desc_size,
void *buffer, u32 bufferlen, u64 requestid)
{
- int ret;
u32 packetlen;
u32 packetlen_aligned;
struct kvec bufferlist[3];
u64 aligned_data = 0;
- bool signal = false;
bool lock = channel->acquire_ring_lock;
packetlen = desc_size + bufferlen;
@@ -848,13 +798,8 @@ int vmbus_sendpacket_mpb_desc(struct vmbus_channel *channel,
bufferlist[2].iov_base = &aligned_data;
bufferlist[2].iov_len = (packetlen_aligned - packetlen);
- ret = hv_ringbuffer_write(&channel->outbound, bufferlist, 3,
- &signal, lock, channel->signal_policy);
-
- if (ret == 0 && signal)
- vmbus_setevent(channel);
-
- return ret;
+ return hv_ringbuffer_write(channel, bufferlist, 3,
+ lock, true);
}
EXPORT_SYMBOL_GPL(vmbus_sendpacket_mpb_desc);
@@ -866,14 +811,12 @@ int vmbus_sendpacket_multipagebuffer(struct vmbus_channel *channel,
struct hv_multipage_buffer *multi_pagebuffer,
void *buffer, u32 bufferlen, u64 requestid)
{
- int ret;
struct vmbus_channel_packet_multipage_buffer desc;
u32 descsize;
u32 packetlen;
u32 packetlen_aligned;
struct kvec bufferlist[3];
u64 aligned_data = 0;
- bool signal = false;
bool lock = channel->acquire_ring_lock;
u32 pfncount = NUM_PAGES_SPANNED(multi_pagebuffer->offset,
multi_pagebuffer->len);
@@ -913,13 +856,8 @@ int vmbus_sendpacket_multipagebuffer(struct vmbus_channel *channel,
bufferlist[2].iov_base = &aligned_data;
bufferlist[2].iov_len = (packetlen_aligned - packetlen);
- ret = hv_ringbuffer_write(&channel->outbound, bufferlist, 3,
- &signal, lock, channel->signal_policy);
-
- if (ret == 0 && signal)
- vmbus_setevent(channel);
-
- return ret;
+ return hv_ringbuffer_write(channel, bufferlist, 3,
+ lock, true);
}
EXPORT_SYMBOL_GPL(vmbus_sendpacket_multipagebuffer);
@@ -941,16 +879,9 @@ __vmbus_recvpacket(struct vmbus_channel *channel, void *buffer,
u32 bufferlen, u32 *buffer_actual_len, u64 *requestid,
bool raw)
{
- int ret;
- bool signal = false;
+ return hv_ringbuffer_read(channel, buffer, bufferlen,
+ buffer_actual_len, requestid, raw);
- ret = hv_ringbuffer_read(&channel->inbound, buffer, bufferlen,
- buffer_actual_len, requestid, &signal, raw);
-
- if (signal)
- vmbus_setevent(channel);
-
- return ret;
}
int vmbus_recvpacket(struct vmbus_channel *channel, void *buffer,
diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c
index 96a85cd39580..26b419203f16 100644
--- a/drivers/hv/channel_mgmt.c
+++ b/drivers/hv/channel_mgmt.c
@@ -134,7 +134,7 @@ static const struct vmbus_device vmbus_devs[] = {
},
/* Unknown GUID */
- { .dev_type = HV_UNKOWN,
+ { .dev_type = HV_UNKNOWN,
.perf_device = false,
},
};
@@ -163,9 +163,9 @@ static u16 hv_get_dev_type(const struct vmbus_channel *channel)
u16 i;
if (is_hvsock_channel(channel) || is_unsupported_vmbus_devs(guid))
- return HV_UNKOWN;
+ return HV_UNKNOWN;
- for (i = HV_IDE; i < HV_UNKOWN; i++) {
+ for (i = HV_IDE; i < HV_UNKNOWN; i++) {
if (!uuid_le_cmp(*guid, vmbus_devs[i].guid))
return i;
}
@@ -389,6 +389,7 @@ void vmbus_free_channels(void)
{
struct vmbus_channel *channel, *tmp;
+ mutex_lock(&vmbus_connection.channel_mutex);
list_for_each_entry_safe(channel, tmp, &vmbus_connection.chn_list,
listentry) {
/* hv_process_channel_removal() needs this */
@@ -396,6 +397,7 @@ void vmbus_free_channels(void)
vmbus_device_unregister(channel->device_obj);
}
+ mutex_unlock(&vmbus_connection.channel_mutex);
}
/*
@@ -447,8 +449,6 @@ static void vmbus_process_offer(struct vmbus_channel *newchannel)
}
dev_type = hv_get_dev_type(newchannel);
- if (dev_type == HV_NIC)
- set_channel_signal_state(newchannel, HV_SIGNAL_POLICY_EXPLICIT);
init_vp_index(newchannel, dev_type);
diff --git a/drivers/hv/connection.c b/drivers/hv/connection.c
index 78e6368a4423..6ce8b874e833 100644
--- a/drivers/hv/connection.c
+++ b/drivers/hv/connection.c
@@ -39,6 +39,7 @@ struct vmbus_connection vmbus_connection = {
.conn_state = DISCONNECTED,
.next_gpadl_handle = ATOMIC_INIT(0xE1E10),
};
+EXPORT_SYMBOL_GPL(vmbus_connection);
/*
* Negotiated protocol version with the host.
diff --git a/drivers/hv/hv.c b/drivers/hv/hv.c
index 60dbd6cb4640..446802ae8f1b 100644
--- a/drivers/hv/hv.c
+++ b/drivers/hv/hv.c
@@ -575,7 +575,7 @@ void hv_synic_clockevents_cleanup(void)
if (!(ms_hyperv.features & HV_X64_MSR_SYNTIMER_AVAILABLE))
return;
- for_each_online_cpu(cpu)
+ for_each_present_cpu(cpu)
clockevents_unbind_device(hv_context.clk_evt[cpu], cpu);
}
@@ -594,8 +594,10 @@ void hv_synic_cleanup(void *arg)
return;
/* Turn off clockevent device */
- if (ms_hyperv.features & HV_X64_MSR_SYNTIMER_AVAILABLE)
+ if (ms_hyperv.features & HV_X64_MSR_SYNTIMER_AVAILABLE) {
+ clockevents_unbind_device(hv_context.clk_evt[cpu], cpu);
hv_ce_shutdown(hv_context.clk_evt[cpu]);
+ }
rdmsrl(HV_X64_MSR_SINT0 + VMBUS_MESSAGE_SINT, shared_sint.as_uint64);
diff --git a/drivers/hv/hv_balloon.c b/drivers/hv/hv_balloon.c
index fdf8da929cbe..14c3dc4bd23c 100644
--- a/drivers/hv/hv_balloon.c
+++ b/drivers/hv/hv_balloon.c
@@ -564,6 +564,11 @@ struct hv_dynmem_device {
* next version to try.
*/
__u32 next_version;
+
+ /*
+ * The negotiated version agreed by host.
+ */
+ __u32 version;
};
static struct hv_dynmem_device dm_device;
@@ -645,6 +650,7 @@ static void hv_bring_pgs_online(struct hv_hotadd_state *has,
{
int i;
+ pr_debug("Online %lu pages starting at pfn 0x%lx\n", size, start_pfn);
for (i = 0; i < size; i++)
hv_page_online_one(has, pfn_to_page(start_pfn + i));
}
@@ -685,7 +691,7 @@ static void hv_mem_hot_add(unsigned long start, unsigned long size,
(HA_CHUNK << PAGE_SHIFT));
if (ret) {
- pr_info("hot_add memory failed error is %d\n", ret);
+ pr_warn("hot_add memory failed error is %d\n", ret);
if (ret == -EEXIST) {
/*
* This error indicates that the error
@@ -814,6 +820,9 @@ static unsigned long handle_pg_range(unsigned long pg_start,
unsigned long old_covered_state;
unsigned long res = 0, flags;
+ pr_debug("Hot adding %lu pages starting at pfn 0x%lx.\n", pg_count,
+ pg_start);
+
spin_lock_irqsave(&dm_device.ha_lock, flags);
list_for_each_entry(has, &dm_device.ha_region_list, list) {
/*
@@ -1025,8 +1034,13 @@ static void process_info(struct hv_dynmem_device *dm, struct dm_info_msg *msg)
switch (info_hdr->type) {
case INFO_TYPE_MAX_PAGE_CNT:
- pr_info("Received INFO_TYPE_MAX_PAGE_CNT\n");
- pr_info("Data Size is %d\n", info_hdr->data_size);
+ if (info_hdr->data_size == sizeof(__u64)) {
+ __u64 *max_page_count = (__u64 *)&info_hdr[1];
+
+ pr_info("INFO_TYPE_MAX_PAGE_CNT = %llu\n",
+ *max_page_count);
+ }
+
break;
default:
pr_info("Received Unknown type: %d\n", info_hdr->type);
@@ -1196,8 +1210,6 @@ static unsigned int alloc_balloon_pages(struct hv_dynmem_device *dm,
return num_pages;
}
-
-
static void balloon_up(struct work_struct *dummy)
{
unsigned int num_pages = dm_device.balloon_wrk.num_pages;
@@ -1224,6 +1236,10 @@ static void balloon_up(struct work_struct *dummy)
/* Refuse to balloon below the floor, keep the 2M granularity. */
if (avail_pages < num_pages || avail_pages - num_pages < floor) {
+ pr_warn("Balloon request will be partially fulfilled. %s\n",
+ avail_pages < num_pages ? "Not enough memory." :
+ "Balloon floor reached.");
+
num_pages = avail_pages > floor ? (avail_pages - floor) : 0;
num_pages -= num_pages % PAGES_IN_2M;
}
@@ -1245,6 +1261,9 @@ static void balloon_up(struct work_struct *dummy)
}
if (num_ballooned == 0 || num_ballooned == num_pages) {
+ pr_debug("Ballooned %u out of %u requested pages.\n",
+ num_pages, dm_device.balloon_wrk.num_pages);
+
bl_resp->more_pages = 0;
done = true;
dm_device.state = DM_INITIALIZED;
@@ -1292,12 +1311,16 @@ static void balloon_down(struct hv_dynmem_device *dm,
int range_count = req->range_count;
struct dm_unballoon_response resp;
int i;
+ unsigned int prev_pages_ballooned = dm->num_pages_ballooned;
for (i = 0; i < range_count; i++) {
free_balloon_pages(dm, &range_array[i]);
complete(&dm_device.config_event);
}
+ pr_debug("Freed %u ballooned pages.\n",
+ prev_pages_ballooned - dm->num_pages_ballooned);
+
if (req->more_pages == 1)
return;
@@ -1365,6 +1388,7 @@ static void version_resp(struct hv_dynmem_device *dm,
version_req.hdr.size = sizeof(struct dm_version_request);
version_req.hdr.trans_id = atomic_inc_return(&trans_id);
version_req.version.version = dm->next_version;
+ dm->version = version_req.version.version;
/*
* Set the next version to try in case current version fails.
@@ -1501,7 +1525,11 @@ static int balloon_probe(struct hv_device *dev,
struct dm_version_request version_req;
struct dm_capabilities cap_msg;
+#ifdef CONFIG_MEMORY_HOTPLUG
do_hot_add = hot_add;
+#else
+ do_hot_add = false;
+#endif
/*
* First allocate a send buffer.
@@ -1553,6 +1581,7 @@ static int balloon_probe(struct hv_device *dev,
version_req.hdr.trans_id = atomic_inc_return(&trans_id);
version_req.version.version = DYNMEM_PROTOCOL_VERSION_WIN10;
version_req.is_last_attempt = 0;
+ dm_device.version = version_req.version.version;
ret = vmbus_sendpacket(dev->channel, &version_req,
sizeof(struct dm_version_request),
@@ -1575,6 +1604,11 @@ static int balloon_probe(struct hv_device *dev,
ret = -ETIMEDOUT;
goto probe_error2;
}
+
+ pr_info("Using Dynamic Memory protocol version %u.%u\n",
+ DYNMEM_MAJOR_VERSION(dm_device.version),
+ DYNMEM_MINOR_VERSION(dm_device.version));
+
/*
* Now submit our capabilities to the host.
*/
diff --git a/drivers/hv/hv_snapshot.c b/drivers/hv/hv_snapshot.c
index a6707133c297..eee238cc60bd 100644
--- a/drivers/hv/hv_snapshot.c
+++ b/drivers/hv/hv_snapshot.c
@@ -31,7 +31,10 @@
#define VSS_MINOR 0
#define VSS_VERSION (VSS_MAJOR << 16 | VSS_MINOR)
-#define VSS_USERSPACE_TIMEOUT (msecs_to_jiffies(10 * 1000))
+/*
+ * Timeout values are based on expecations from host
+ */
+#define VSS_FREEZE_TIMEOUT (15 * 60)
/*
* Global state maintained for transaction that is being processed. For a class
@@ -120,7 +123,7 @@ static int vss_handle_handshake(struct hv_vss_msg *vss_msg)
default:
return -EINVAL;
}
- pr_debug("VSS: userspace daemon ver. %d connected\n", dm_reg_value);
+ pr_info("VSS: userspace daemon ver. %d connected\n", dm_reg_value);
return 0;
}
@@ -128,8 +131,10 @@ static int vss_on_msg(void *msg, int len)
{
struct hv_vss_msg *vss_msg = (struct hv_vss_msg *)msg;
- if (len != sizeof(*vss_msg))
+ if (len != sizeof(*vss_msg)) {
+ pr_debug("VSS: Message size does not match length\n");
return -EINVAL;
+ }
if (vss_msg->vss_hdr.operation == VSS_OP_REGISTER ||
vss_msg->vss_hdr.operation == VSS_OP_REGISTER1) {
@@ -137,8 +142,11 @@ static int vss_on_msg(void *msg, int len)
* Don't process registration messages if we're in the middle
* of a transaction processing.
*/
- if (vss_transaction.state > HVUTIL_READY)
+ if (vss_transaction.state > HVUTIL_READY) {
+ pr_debug("VSS: Got unexpected registration request\n");
return -EINVAL;
+ }
+
return vss_handle_handshake(vss_msg);
} else if (vss_transaction.state == HVUTIL_USERSPACE_REQ) {
vss_transaction.state = HVUTIL_USERSPACE_RECV;
@@ -155,7 +163,7 @@ static int vss_on_msg(void *msg, int len)
}
} else {
/* This is a spurious call! */
- pr_warn("VSS: Transaction not active\n");
+ pr_debug("VSS: Transaction not active\n");
return -EINVAL;
}
return 0;
@@ -168,8 +176,10 @@ static void vss_send_op(void)
struct hv_vss_msg *vss_msg;
/* The transaction state is wrong. */
- if (vss_transaction.state != HVUTIL_HOSTMSG_RECEIVED)
+ if (vss_transaction.state != HVUTIL_HOSTMSG_RECEIVED) {
+ pr_debug("VSS: Unexpected attempt to send to daemon\n");
return;
+ }
vss_msg = kzalloc(sizeof(*vss_msg), GFP_KERNEL);
if (!vss_msg)
@@ -179,7 +189,8 @@ static void vss_send_op(void)
vss_transaction.state = HVUTIL_USERSPACE_REQ;
- schedule_delayed_work(&vss_timeout_work, VSS_USERSPACE_TIMEOUT);
+ schedule_delayed_work(&vss_timeout_work, op == VSS_OP_FREEZE ?
+ VSS_FREEZE_TIMEOUT * HZ : HV_UTIL_TIMEOUT * HZ);
rc = hvutil_transport_send(hvt, vss_msg, sizeof(*vss_msg), NULL);
if (rc) {
@@ -210,9 +221,13 @@ static void vss_handle_request(struct work_struct *dummy)
case VSS_OP_HOT_BACKUP:
if (vss_transaction.state < HVUTIL_READY) {
/* Userspace is not registered yet */
+ pr_debug("VSS: Not ready for request.\n");
vss_respond_to_host(HV_E_FAIL);
return;
}
+
+ pr_debug("VSS: Received request for op code: %d\n",
+ vss_transaction.msg->vss_hdr.operation);
vss_transaction.state = HVUTIL_HOSTMSG_RECEIVED;
vss_send_op();
return;
@@ -353,8 +368,10 @@ hv_vss_init(struct hv_util_service *srv)
hvt = hvutil_transport_init(vss_devname, CN_VSS_IDX, CN_VSS_VAL,
vss_on_msg, vss_on_reset);
- if (!hvt)
+ if (!hvt) {
+ pr_warn("VSS: Failed to initialize transport\n");
return -EFAULT;
+ }
return 0;
}
diff --git a/drivers/hv/hv_util.c b/drivers/hv/hv_util.c
index bcd06306f3e8..e7707747f56d 100644
--- a/drivers/hv/hv_util.c
+++ b/drivers/hv/hv_util.c
@@ -389,16 +389,19 @@ static int util_probe(struct hv_device *dev,
ts_srv_version = TS_VERSION_1;
hb_srv_version = HB_VERSION_1;
break;
- case(VERSION_WIN10):
+ case VERSION_WIN7:
+ case VERSION_WIN8:
+ case VERSION_WIN8_1:
util_fw_version = UTIL_FW_VERSION;
sd_srv_version = SD_VERSION;
- ts_srv_version = TS_VERSION;
+ ts_srv_version = TS_VERSION_3;
hb_srv_version = HB_VERSION;
break;
+ case VERSION_WIN10:
default:
util_fw_version = UTIL_FW_VERSION;
sd_srv_version = SD_VERSION;
- ts_srv_version = TS_VERSION_3;
+ ts_srv_version = TS_VERSION;
hb_srv_version = HB_VERSION;
}
diff --git a/drivers/hv/hyperv_vmbus.h b/drivers/hv/hyperv_vmbus.h
index a5b4442433c8..0675b395ce5c 100644
--- a/drivers/hv/hyperv_vmbus.h
+++ b/drivers/hv/hyperv_vmbus.h
@@ -38,7 +38,7 @@
/*
* Timeout for guest-host handshake for services.
*/
-#define HV_UTIL_NEGO_TIMEOUT 60
+#define HV_UTIL_NEGO_TIMEOUT 55
/*
* The below CPUID leaves are present if VersionAndFeatures.HypervisorPresent
@@ -527,14 +527,14 @@ int hv_ringbuffer_init(struct hv_ring_buffer_info *ring_info,
void hv_ringbuffer_cleanup(struct hv_ring_buffer_info *ring_info);
-int hv_ringbuffer_write(struct hv_ring_buffer_info *ring_info,
+int hv_ringbuffer_write(struct vmbus_channel *channel,
struct kvec *kv_list,
- u32 kv_count, bool *signal, bool lock,
- enum hv_signal_policy policy);
+ u32 kv_count, bool lock,
+ bool kick_q);
-int hv_ringbuffer_read(struct hv_ring_buffer_info *inring_info,
+int hv_ringbuffer_read(struct vmbus_channel *channel,
void *buffer, u32 buflen, u32 *buffer_actual_len,
- u64 *requestid, bool *signal, bool raw);
+ u64 *requestid, bool raw);
void hv_ringbuffer_get_debuginfo(struct hv_ring_buffer_info *ring_info,
struct hv_ring_buffer_debug_info *debug_info);
diff --git a/drivers/hv/ring_buffer.c b/drivers/hv/ring_buffer.c
index 08043da1a61c..cd49cb17eb7f 100644
--- a/drivers/hv/ring_buffer.c
+++ b/drivers/hv/ring_buffer.c
@@ -66,21 +66,25 @@ u32 hv_end_read(struct hv_ring_buffer_info *rbi)
* once the ring buffer is empty, it will clear the
* interrupt_mask and re-check to see if new data has
* arrived.
+ *
+ * KYS: Oct. 30, 2016:
+ * It looks like Windows hosts have logic to deal with DOS attacks that
+ * can be triggered if it receives interrupts when it is not expecting
+ * the interrupt. The host expects interrupts only when the ring
+ * transitions from empty to non-empty (or full to non full on the guest
+ * to host ring).
+ * So, base the signaling decision solely on the ring state until the
+ * host logic is fixed.
*/
-static bool hv_need_to_signal(u32 old_write, struct hv_ring_buffer_info *rbi,
- enum hv_signal_policy policy)
+static void hv_signal_on_write(u32 old_write, struct vmbus_channel *channel,
+ bool kick_q)
{
+ struct hv_ring_buffer_info *rbi = &channel->outbound;
+
virt_mb();
if (READ_ONCE(rbi->ring_buffer->interrupt_mask))
- return false;
-
- /*
- * When the client wants to control signaling,
- * we only honour the host interrupt mask.
- */
- if (policy == HV_SIGNAL_POLICY_EXPLICIT)
- return true;
+ return;
/* check interrupt_mask before read_index */
virt_rmb();
@@ -89,9 +93,9 @@ static bool hv_need_to_signal(u32 old_write, struct hv_ring_buffer_info *rbi,
* ring transitions from being empty to non-empty.
*/
if (old_write == READ_ONCE(rbi->ring_buffer->read_index))
- return true;
+ vmbus_setevent(channel);
- return false;
+ return;
}
/* Get the next write location for the specified ring buffer. */
@@ -280,9 +284,9 @@ void hv_ringbuffer_cleanup(struct hv_ring_buffer_info *ring_info)
}
/* Write to the ring buffer. */
-int hv_ringbuffer_write(struct hv_ring_buffer_info *outring_info,
- struct kvec *kv_list, u32 kv_count, bool *signal, bool lock,
- enum hv_signal_policy policy)
+int hv_ringbuffer_write(struct vmbus_channel *channel,
+ struct kvec *kv_list, u32 kv_count, bool lock,
+ bool kick_q)
{
int i = 0;
u32 bytes_avail_towrite;
@@ -292,6 +296,7 @@ int hv_ringbuffer_write(struct hv_ring_buffer_info *outring_info,
u32 old_write;
u64 prev_indices = 0;
unsigned long flags = 0;
+ struct hv_ring_buffer_info *outring_info = &channel->outbound;
for (i = 0; i < kv_count; i++)
totalbytes_towrite += kv_list[i].iov_len;
@@ -344,13 +349,13 @@ int hv_ringbuffer_write(struct hv_ring_buffer_info *outring_info,
if (lock)
spin_unlock_irqrestore(&outring_info->ring_lock, flags);
- *signal = hv_need_to_signal(old_write, outring_info, policy);
+ hv_signal_on_write(old_write, channel, kick_q);
return 0;
}
-int hv_ringbuffer_read(struct hv_ring_buffer_info *inring_info,
+int hv_ringbuffer_read(struct vmbus_channel *channel,
void *buffer, u32 buflen, u32 *buffer_actual_len,
- u64 *requestid, bool *signal, bool raw)
+ u64 *requestid, bool raw)
{
u32 bytes_avail_toread;
u32 next_read_location = 0;
@@ -359,6 +364,7 @@ int hv_ringbuffer_read(struct hv_ring_buffer_info *inring_info,
u32 offset;
u32 packetlen;
int ret = 0;
+ struct hv_ring_buffer_info *inring_info = &channel->inbound;
if (buflen <= 0)
return -EINVAL;
@@ -416,7 +422,7 @@ int hv_ringbuffer_read(struct hv_ring_buffer_info *inring_info,
/* Update the read index */
hv_set_next_read_location(inring_info, next_read_location);
- *signal = hv_need_to_signal_on_read(inring_info);
+ hv_signal_on_read(channel);
return ret;
}
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index 0276d2ef06ee..230c62e7f567 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -45,6 +45,11 @@
#include <linux/random.h>
#include "hyperv_vmbus.h"
+struct vmbus_dynid {
+ struct list_head node;
+ struct hv_vmbus_device_id id;
+};
+
static struct acpi_device *hv_acpi_dev;
static struct completion probe_event;
@@ -500,7 +505,7 @@ static ssize_t device_show(struct device *dev,
static DEVICE_ATTR_RO(device);
/* Set up per device attributes in /sys/bus/vmbus/devices/<bus device> */
-static struct attribute *vmbus_attrs[] = {
+static struct attribute *vmbus_dev_attrs[] = {
&dev_attr_id.attr,
&dev_attr_state.attr,
&dev_attr_monitor_id.attr,
@@ -528,7 +533,7 @@ static struct attribute *vmbus_attrs[] = {
&dev_attr_device.attr,
NULL,
};
-ATTRIBUTE_GROUPS(vmbus);
+ATTRIBUTE_GROUPS(vmbus_dev);
/*
* vmbus_uevent - add uevent for our device
@@ -565,10 +570,29 @@ static inline bool is_null_guid(const uuid_le *guid)
* Return a matching hv_vmbus_device_id pointer.
* If there is no match, return NULL.
*/
-static const struct hv_vmbus_device_id *hv_vmbus_get_id(
- const struct hv_vmbus_device_id *id,
+static const struct hv_vmbus_device_id *hv_vmbus_get_id(struct hv_driver *drv,
const uuid_le *guid)
{
+ const struct hv_vmbus_device_id *id = NULL;
+ struct vmbus_dynid *dynid;
+
+ /* Look at the dynamic ids first, before the static ones */
+ spin_lock(&drv->dynids.lock);
+ list_for_each_entry(dynid, &drv->dynids.list, node) {
+ if (!uuid_le_cmp(dynid->id.guid, *guid)) {
+ id = &dynid->id;
+ break;
+ }
+ }
+ spin_unlock(&drv->dynids.lock);
+
+ if (id)
+ return id;
+
+ id = drv->id_table;
+ if (id == NULL)
+ return NULL; /* empty device table */
+
for (; !is_null_guid(&id->guid); id++)
if (!uuid_le_cmp(id->guid, *guid))
return id;
@@ -576,6 +600,134 @@ static const struct hv_vmbus_device_id *hv_vmbus_get_id(
return NULL;
}
+/* vmbus_add_dynid - add a new device ID to this driver and re-probe devices */
+static int vmbus_add_dynid(struct hv_driver *drv, uuid_le *guid)
+{
+ struct vmbus_dynid *dynid;
+
+ dynid = kzalloc(sizeof(*dynid), GFP_KERNEL);
+ if (!dynid)
+ return -ENOMEM;
+
+ dynid->id.guid = *guid;
+
+ spin_lock(&drv->dynids.lock);
+ list_add_tail(&dynid->node, &drv->dynids.list);
+ spin_unlock(&drv->dynids.lock);
+
+ return driver_attach(&drv->driver);
+}
+
+static void vmbus_free_dynids(struct hv_driver *drv)
+{
+ struct vmbus_dynid *dynid, *n;
+
+ spin_lock(&drv->dynids.lock);
+ list_for_each_entry_safe(dynid, n, &drv->dynids.list, node) {
+ list_del(&dynid->node);
+ kfree(dynid);
+ }
+ spin_unlock(&drv->dynids.lock);
+}
+
+/* Parse string of form: 1b4e28ba-2fa1-11d2-883f-b9a761bde3f */
+static int get_uuid_le(const char *str, uuid_le *uu)
+{
+ unsigned int b[16];
+ int i;
+
+ if (strlen(str) < 37)
+ return -1;
+
+ for (i = 0; i < 36; i++) {
+ switch (i) {
+ case 8: case 13: case 18: case 23:
+ if (str[i] != '-')
+ return -1;
+ break;
+ default:
+ if (!isxdigit(str[i]))
+ return -1;
+ }
+ }
+
+ /* unparse little endian output byte order */
+ if (sscanf(str,
+ "%2x%2x%2x%2x-%2x%2x-%2x%2x-%2x%2x-%2x%2x%2x%2x%2x%2x",
+ &b[3], &b[2], &b[1], &b[0],
+ &b[5], &b[4], &b[7], &b[6], &b[8], &b[9],
+ &b[10], &b[11], &b[12], &b[13], &b[14], &b[15]) != 16)
+ return -1;
+
+ for (i = 0; i < 16; i++)
+ uu->b[i] = b[i];
+ return 0;
+}
+
+/*
+ * store_new_id - sysfs frontend to vmbus_add_dynid()
+ *
+ * Allow GUIDs to be added to an existing driver via sysfs.
+ */
+static ssize_t new_id_store(struct device_driver *driver, const char *buf,
+ size_t count)
+{
+ struct hv_driver *drv = drv_to_hv_drv(driver);
+ uuid_le guid = NULL_UUID_LE;
+ ssize_t retval;
+
+ if (get_uuid_le(buf, &guid) != 0)
+ return -EINVAL;
+
+ if (hv_vmbus_get_id(drv, &guid))
+ return -EEXIST;
+
+ retval = vmbus_add_dynid(drv, &guid);
+ if (retval)
+ return retval;
+ return count;
+}
+static DRIVER_ATTR_WO(new_id);
+
+/*
+ * store_remove_id - remove a PCI device ID from this driver
+ *
+ * Removes a dynamic pci device ID to this driver.
+ */
+static ssize_t remove_id_store(struct device_driver *driver, const char *buf,
+ size_t count)
+{
+ struct hv_driver *drv = drv_to_hv_drv(driver);
+ struct vmbus_dynid *dynid, *n;
+ uuid_le guid = NULL_UUID_LE;
+ size_t retval = -ENODEV;
+
+ if (get_uuid_le(buf, &guid))
+ return -EINVAL;
+
+ spin_lock(&drv->dynids.lock);
+ list_for_each_entry_safe(dynid, n, &drv->dynids.list, node) {
+ struct hv_vmbus_device_id *id = &dynid->id;
+
+ if (!uuid_le_cmp(id->guid, guid)) {
+ list_del(&dynid->node);
+ kfree(dynid);
+ retval = count;
+ break;
+ }
+ }
+ spin_unlock(&drv->dynids.lock);
+
+ return retval;
+}
+static DRIVER_ATTR_WO(remove_id);
+
+static struct attribute *vmbus_drv_attrs[] = {
+ &driver_attr_new_id.attr,
+ &driver_attr_remove_id.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(vmbus_drv);
/*
@@ -590,7 +742,7 @@ static int vmbus_match(struct device *device, struct device_driver *driver)
if (is_hvsock_channel(hv_dev->channel))
return drv->hvsock;
- if (hv_vmbus_get_id(drv->id_table, &hv_dev->dev_type))
+ if (hv_vmbus_get_id(drv, &hv_dev->dev_type))
return 1;
return 0;
@@ -607,7 +759,7 @@ static int vmbus_probe(struct device *child_device)
struct hv_device *dev = device_to_hv_device(child_device);
const struct hv_vmbus_device_id *dev_id;
- dev_id = hv_vmbus_get_id(drv->id_table, &dev->dev_type);
+ dev_id = hv_vmbus_get_id(drv, &dev->dev_type);
if (drv->probe) {
ret = drv->probe(dev, dev_id);
if (ret != 0)
@@ -684,7 +836,8 @@ static struct bus_type hv_bus = {
.remove = vmbus_remove,
.probe = vmbus_probe,
.uevent = vmbus_uevent,
- .dev_groups = vmbus_groups,
+ .dev_groups = vmbus_dev_groups,
+ .drv_groups = vmbus_drv_groups,
};
struct onmessage_work_context {
@@ -905,6 +1058,9 @@ int __vmbus_driver_register(struct hv_driver *hv_driver, struct module *owner, c
hv_driver->driver.mod_name = mod_name;
hv_driver->driver.bus = &hv_bus;
+ spin_lock_init(&hv_driver->dynids.lock);
+ INIT_LIST_HEAD(&hv_driver->dynids.list);
+
ret = driver_register(&hv_driver->driver);
return ret;
@@ -923,8 +1079,10 @@ void vmbus_driver_unregister(struct hv_driver *hv_driver)
{
pr_info("unregistering driver %s\n", hv_driver->name);
- if (!vmbus_exists())
+ if (!vmbus_exists()) {
driver_unregister(&hv_driver->driver);
+ vmbus_free_dynids(hv_driver);
+ }
}
EXPORT_SYMBOL_GPL(vmbus_driver_unregister);
diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c
index 2cd7c718198a..17741969026e 100644
--- a/drivers/hwtracing/coresight/coresight-etm-perf.c
+++ b/drivers/hwtracing/coresight/coresight-etm-perf.c
@@ -202,6 +202,21 @@ static void *etm_setup_aux(int event_cpu, void **pages,
if (!event_data)
return NULL;
+ /*
+ * In theory nothing prevent tracers in a trace session from being
+ * associated with different sinks, nor having a sink per tracer. But
+ * until we have HW with this kind of topology we need to assume tracers
+ * in a trace session are using the same sink. Therefore go through
+ * the coresight bus and pick the first enabled sink.
+ *
+ * When operated from sysFS users are responsible to enable the sink
+ * while from perf, the perf tools will do it based on the choice made
+ * on the cmd line. As such the "enable_sink" flag in sysFS is reset.
+ */
+ sink = coresight_get_enabled_sink(true);
+ if (!sink)
+ goto err;
+
INIT_WORK(&event_data->work, free_event_data);
mask = &event_data->mask;
@@ -219,25 +234,11 @@ static void *etm_setup_aux(int event_cpu, void **pages,
* list of devices from source to sink that can be
* referenced later when the path is actually needed.
*/
- event_data->path[cpu] = coresight_build_path(csdev);
+ event_data->path[cpu] = coresight_build_path(csdev, sink);
if (IS_ERR(event_data->path[cpu]))
goto err;
}
- /*
- * In theory nothing prevent tracers in a trace session from being
- * associated with different sinks, nor having a sink per tracer. But
- * until we have HW with this kind of topology and a way to convey
- * sink assignement from the perf cmd line we need to assume tracers
- * in a trace session are using the same sink. Therefore pick the sink
- * found at the end of the first available path.
- */
- cpu = cpumask_first(mask);
- /* Grab the sink at the end of the path */
- sink = coresight_get_sink(event_data->path[cpu]);
- if (!sink)
- goto err;
-
if (!sink_ops(sink)->alloc_buffer)
goto err;
diff --git a/drivers/hwtracing/coresight/coresight-etm.h b/drivers/hwtracing/coresight/coresight-etm.h
index 4a18ee499965..ad063d7444e1 100644
--- a/drivers/hwtracing/coresight/coresight-etm.h
+++ b/drivers/hwtracing/coresight/coresight-etm.h
@@ -89,11 +89,13 @@
/* ETMCR - 0x00 */
#define ETMCR_PWD_DWN BIT(0)
#define ETMCR_STALL_MODE BIT(7)
+#define ETMCR_BRANCH_BROADCAST BIT(8)
#define ETMCR_ETM_PRG BIT(10)
#define ETMCR_ETM_EN BIT(11)
#define ETMCR_CYC_ACC BIT(12)
#define ETMCR_CTXID_SIZE (BIT(14)|BIT(15))
#define ETMCR_TIMESTAMP_EN BIT(28)
+#define ETMCR_RETURN_STACK BIT(29)
/* ETMCCR - 0x04 */
#define ETMCCR_FIFOFULL BIT(23)
/* ETMPDCR - 0x310 */
@@ -110,8 +112,11 @@
#define ETM_MODE_STALL BIT(2)
#define ETM_MODE_TIMESTAMP BIT(3)
#define ETM_MODE_CTXID BIT(4)
+#define ETM_MODE_BBROAD BIT(5)
+#define ETM_MODE_RET_STACK BIT(6)
#define ETM_MODE_ALL (ETM_MODE_EXCLUDE | ETM_MODE_CYCACC | \
ETM_MODE_STALL | ETM_MODE_TIMESTAMP | \
+ ETM_MODE_BBROAD | ETM_MODE_RET_STACK | \
ETM_MODE_CTXID | ETM_MODE_EXCL_KERN | \
ETM_MODE_EXCL_USER)
diff --git a/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c
index e9b071953f80..ca98ad13bb8c 100644
--- a/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c
+++ b/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c
@@ -146,7 +146,7 @@ static ssize_t mode_store(struct device *dev,
goto err_unlock;
}
config->ctrl |= ETMCR_STALL_MODE;
- } else
+ } else
config->ctrl &= ~ETMCR_STALL_MODE;
if (config->mode & ETM_MODE_TIMESTAMP) {
@@ -164,6 +164,16 @@ static ssize_t mode_store(struct device *dev,
else
config->ctrl &= ~ETMCR_CTXID_SIZE;
+ if (config->mode & ETM_MODE_BBROAD)
+ config->ctrl |= ETMCR_BRANCH_BROADCAST;
+ else
+ config->ctrl &= ~ETMCR_BRANCH_BROADCAST;
+
+ if (config->mode & ETM_MODE_RET_STACK)
+ config->ctrl |= ETMCR_RETURN_STACK;
+ else
+ config->ctrl &= ~ETMCR_RETURN_STACK;
+
if (config->mode & (ETM_MODE_EXCL_KERN | ETM_MODE_EXCL_USER))
etm_config_trace_mode(config);
diff --git a/drivers/hwtracing/coresight/coresight-priv.h b/drivers/hwtracing/coresight/coresight-priv.h
index 196a14be4b3d..ef9d8e93e3b2 100644
--- a/drivers/hwtracing/coresight/coresight-priv.h
+++ b/drivers/hwtracing/coresight/coresight-priv.h
@@ -111,7 +111,9 @@ static inline void CS_UNLOCK(void __iomem *addr)
void coresight_disable_path(struct list_head *path);
int coresight_enable_path(struct list_head *path, u32 mode);
struct coresight_device *coresight_get_sink(struct list_head *path);
-struct list_head *coresight_build_path(struct coresight_device *csdev);
+struct coresight_device *coresight_get_enabled_sink(bool reset);
+struct list_head *coresight_build_path(struct coresight_device *csdev,
+ struct coresight_device *sink);
void coresight_release_path(struct list_head *path);
#ifdef CONFIG_CORESIGHT_SOURCE_ETM3X
diff --git a/drivers/hwtracing/coresight/coresight-stm.c b/drivers/hwtracing/coresight/coresight-stm.c
index 49e0f1b925a5..944c17b48d23 100644
--- a/drivers/hwtracing/coresight/coresight-stm.c
+++ b/drivers/hwtracing/coresight/coresight-stm.c
@@ -419,10 +419,10 @@ static ssize_t stm_generic_packet(struct stm_data *stm_data,
struct stm_drvdata, stm);
if (!(drvdata && local_read(&drvdata->mode)))
- return 0;
+ return -EACCES;
if (channel >= drvdata->numsp)
- return 0;
+ return -EINVAL;
ch_addr = (unsigned long)stm_channel_addr(drvdata, channel);
@@ -920,6 +920,11 @@ static struct amba_id stm_ids[] = {
.mask = 0x0003ffff,
.data = "STM32",
},
+ {
+ .id = 0x0003b963,
+ .mask = 0x0003ffff,
+ .data = "STM500",
+ },
{ 0, 0},
};
diff --git a/drivers/hwtracing/coresight/coresight-tmc-etf.c b/drivers/hwtracing/coresight/coresight-tmc-etf.c
index d6941ea24d8d..1549436e2492 100644
--- a/drivers/hwtracing/coresight/coresight-tmc-etf.c
+++ b/drivers/hwtracing/coresight/coresight-tmc-etf.c
@@ -70,7 +70,7 @@ static void tmc_etb_disable_hw(struct tmc_drvdata *drvdata)
* When operating in sysFS mode the content of the buffer needs to be
* read before the TMC is disabled.
*/
- if (local_read(&drvdata->mode) == CS_MODE_SYSFS)
+ if (drvdata->mode == CS_MODE_SYSFS)
tmc_etb_dump_hw(drvdata);
tmc_disable_hw(drvdata);
@@ -103,19 +103,14 @@ static void tmc_etf_disable_hw(struct tmc_drvdata *drvdata)
CS_LOCK(drvdata->base);
}
-static int tmc_enable_etf_sink_sysfs(struct coresight_device *csdev, u32 mode)
+static int tmc_enable_etf_sink_sysfs(struct coresight_device *csdev)
{
int ret = 0;
bool used = false;
char *buf = NULL;
- long val;
unsigned long flags;
struct tmc_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
- /* This shouldn't be happening */
- if (WARN_ON(mode != CS_MODE_SYSFS))
- return -EINVAL;
-
/*
* If we don't have a buffer release the lock and allocate memory.
* Otherwise keep the lock and move along.
@@ -138,13 +133,12 @@ static int tmc_enable_etf_sink_sysfs(struct coresight_device *csdev, u32 mode)
goto out;
}
- val = local_xchg(&drvdata->mode, mode);
/*
* In sysFS mode we can have multiple writers per sink. Since this
* sink is already enabled no memory is needed and the HW need not be
* touched.
*/
- if (val == CS_MODE_SYSFS)
+ if (drvdata->mode == CS_MODE_SYSFS)
goto out;
/*
@@ -163,6 +157,7 @@ static int tmc_enable_etf_sink_sysfs(struct coresight_device *csdev, u32 mode)
drvdata->buf = buf;
}
+ drvdata->mode = CS_MODE_SYSFS;
tmc_etb_enable_hw(drvdata);
out:
spin_unlock_irqrestore(&drvdata->spinlock, flags);
@@ -177,34 +172,29 @@ out:
return ret;
}
-static int tmc_enable_etf_sink_perf(struct coresight_device *csdev, u32 mode)
+static int tmc_enable_etf_sink_perf(struct coresight_device *csdev)
{
int ret = 0;
- long val;
unsigned long flags;
struct tmc_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
- /* This shouldn't be happening */
- if (WARN_ON(mode != CS_MODE_PERF))
- return -EINVAL;
-
spin_lock_irqsave(&drvdata->spinlock, flags);
if (drvdata->reading) {
ret = -EINVAL;
goto out;
}
- val = local_xchg(&drvdata->mode, mode);
/*
* In Perf mode there can be only one writer per sink. There
* is also no need to continue if the ETB/ETR is already operated
* from sysFS.
*/
- if (val != CS_MODE_DISABLED) {
+ if (drvdata->mode != CS_MODE_DISABLED) {
ret = -EINVAL;
goto out;
}
+ drvdata->mode = CS_MODE_PERF;
tmc_etb_enable_hw(drvdata);
out:
spin_unlock_irqrestore(&drvdata->spinlock, flags);
@@ -216,9 +206,9 @@ static int tmc_enable_etf_sink(struct coresight_device *csdev, u32 mode)
{
switch (mode) {
case CS_MODE_SYSFS:
- return tmc_enable_etf_sink_sysfs(csdev, mode);
+ return tmc_enable_etf_sink_sysfs(csdev);
case CS_MODE_PERF:
- return tmc_enable_etf_sink_perf(csdev, mode);
+ return tmc_enable_etf_sink_perf(csdev);
}
/* We shouldn't be here */
@@ -227,7 +217,6 @@ static int tmc_enable_etf_sink(struct coresight_device *csdev, u32 mode)
static void tmc_disable_etf_sink(struct coresight_device *csdev)
{
- long val;
unsigned long flags;
struct tmc_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
@@ -237,10 +226,11 @@ static void tmc_disable_etf_sink(struct coresight_device *csdev)
return;
}
- val = local_xchg(&drvdata->mode, CS_MODE_DISABLED);
/* Disable the TMC only if it needs to */
- if (val != CS_MODE_DISABLED)
+ if (drvdata->mode != CS_MODE_DISABLED) {
tmc_etb_disable_hw(drvdata);
+ drvdata->mode = CS_MODE_DISABLED;
+ }
spin_unlock_irqrestore(&drvdata->spinlock, flags);
@@ -260,7 +250,7 @@ static int tmc_enable_etf_link(struct coresight_device *csdev,
}
tmc_etf_enable_hw(drvdata);
- local_set(&drvdata->mode, CS_MODE_SYSFS);
+ drvdata->mode = CS_MODE_SYSFS;
spin_unlock_irqrestore(&drvdata->spinlock, flags);
dev_info(drvdata->dev, "TMC-ETF enabled\n");
@@ -280,7 +270,7 @@ static void tmc_disable_etf_link(struct coresight_device *csdev,
}
tmc_etf_disable_hw(drvdata);
- local_set(&drvdata->mode, CS_MODE_DISABLED);
+ drvdata->mode = CS_MODE_DISABLED;
spin_unlock_irqrestore(&drvdata->spinlock, flags);
dev_info(drvdata->dev, "TMC disabled\n");
@@ -383,7 +373,7 @@ static void tmc_update_etf_buffer(struct coresight_device *csdev,
return;
/* This shouldn't happen */
- if (WARN_ON_ONCE(local_read(&drvdata->mode) != CS_MODE_PERF))
+ if (WARN_ON_ONCE(drvdata->mode != CS_MODE_PERF))
return;
CS_UNLOCK(drvdata->base);
@@ -504,7 +494,6 @@ const struct coresight_ops tmc_etf_cs_ops = {
int tmc_read_prepare_etb(struct tmc_drvdata *drvdata)
{
- long val;
enum tmc_mode mode;
int ret = 0;
unsigned long flags;
@@ -528,9 +517,8 @@ int tmc_read_prepare_etb(struct tmc_drvdata *drvdata)
goto out;
}
- val = local_read(&drvdata->mode);
/* Don't interfere if operated from Perf */
- if (val == CS_MODE_PERF) {
+ if (drvdata->mode == CS_MODE_PERF) {
ret = -EINVAL;
goto out;
}
@@ -542,7 +530,7 @@ int tmc_read_prepare_etb(struct tmc_drvdata *drvdata)
}
/* Disable the TMC if need be */
- if (val == CS_MODE_SYSFS)
+ if (drvdata->mode == CS_MODE_SYSFS)
tmc_etb_disable_hw(drvdata);
drvdata->reading = true;
@@ -573,7 +561,7 @@ int tmc_read_unprepare_etb(struct tmc_drvdata *drvdata)
}
/* Re-enable the TMC if need be */
- if (local_read(&drvdata->mode) == CS_MODE_SYSFS) {
+ if (drvdata->mode == CS_MODE_SYSFS) {
/*
* The trace run will continue with the same allocated trace
* buffer. As such zero-out the buffer so that we don't end
diff --git a/drivers/hwtracing/coresight/coresight-tmc-etr.c b/drivers/hwtracing/coresight/coresight-tmc-etr.c
index 886ea83c68e0..5d312699b3b9 100644
--- a/drivers/hwtracing/coresight/coresight-tmc-etr.c
+++ b/drivers/hwtracing/coresight/coresight-tmc-etr.c
@@ -86,26 +86,22 @@ static void tmc_etr_disable_hw(struct tmc_drvdata *drvdata)
* When operating in sysFS mode the content of the buffer needs to be
* read before the TMC is disabled.
*/
- if (local_read(&drvdata->mode) == CS_MODE_SYSFS)
+ if (drvdata->mode == CS_MODE_SYSFS)
tmc_etr_dump_hw(drvdata);
tmc_disable_hw(drvdata);
CS_LOCK(drvdata->base);
}
-static int tmc_enable_etr_sink_sysfs(struct coresight_device *csdev, u32 mode)
+static int tmc_enable_etr_sink_sysfs(struct coresight_device *csdev)
{
int ret = 0;
bool used = false;
- long val;
unsigned long flags;
void __iomem *vaddr = NULL;
dma_addr_t paddr;
struct tmc_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
- /* This shouldn't be happening */
- if (WARN_ON(mode != CS_MODE_SYSFS))
- return -EINVAL;
/*
* If we don't have a buffer release the lock and allocate memory.
@@ -134,13 +130,12 @@ static int tmc_enable_etr_sink_sysfs(struct coresight_device *csdev, u32 mode)
goto out;
}
- val = local_xchg(&drvdata->mode, mode);
/*
* In sysFS mode we can have multiple writers per sink. Since this
* sink is already enabled no memory is needed and the HW need not be
* touched.
*/
- if (val == CS_MODE_SYSFS)
+ if (drvdata->mode == CS_MODE_SYSFS)
goto out;
/*
@@ -155,8 +150,7 @@ static int tmc_enable_etr_sink_sysfs(struct coresight_device *csdev, u32 mode)
drvdata->buf = drvdata->vaddr;
}
- memset(drvdata->vaddr, 0, drvdata->size);
-
+ drvdata->mode = CS_MODE_SYSFS;
tmc_etr_enable_hw(drvdata);
out:
spin_unlock_irqrestore(&drvdata->spinlock, flags);
@@ -171,34 +165,29 @@ out:
return ret;
}
-static int tmc_enable_etr_sink_perf(struct coresight_device *csdev, u32 mode)
+static int tmc_enable_etr_sink_perf(struct coresight_device *csdev)
{
int ret = 0;
- long val;
unsigned long flags;
struct tmc_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
- /* This shouldn't be happening */
- if (WARN_ON(mode != CS_MODE_PERF))
- return -EINVAL;
-
spin_lock_irqsave(&drvdata->spinlock, flags);
if (drvdata->reading) {
ret = -EINVAL;
goto out;
}
- val = local_xchg(&drvdata->mode, mode);
/*
* In Perf mode there can be only one writer per sink. There
* is also no need to continue if the ETR is already operated
* from sysFS.
*/
- if (val != CS_MODE_DISABLED) {
+ if (drvdata->mode != CS_MODE_DISABLED) {
ret = -EINVAL;
goto out;
}
+ drvdata->mode = CS_MODE_PERF;
tmc_etr_enable_hw(drvdata);
out:
spin_unlock_irqrestore(&drvdata->spinlock, flags);
@@ -210,9 +199,9 @@ static int tmc_enable_etr_sink(struct coresight_device *csdev, u32 mode)
{
switch (mode) {
case CS_MODE_SYSFS:
- return tmc_enable_etr_sink_sysfs(csdev, mode);
+ return tmc_enable_etr_sink_sysfs(csdev);
case CS_MODE_PERF:
- return tmc_enable_etr_sink_perf(csdev, mode);
+ return tmc_enable_etr_sink_perf(csdev);
}
/* We shouldn't be here */
@@ -221,7 +210,6 @@ static int tmc_enable_etr_sink(struct coresight_device *csdev, u32 mode)
static void tmc_disable_etr_sink(struct coresight_device *csdev)
{
- long val;
unsigned long flags;
struct tmc_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
@@ -231,10 +219,11 @@ static void tmc_disable_etr_sink(struct coresight_device *csdev)
return;
}
- val = local_xchg(&drvdata->mode, CS_MODE_DISABLED);
/* Disable the TMC only if it needs to */
- if (val != CS_MODE_DISABLED)
+ if (drvdata->mode != CS_MODE_DISABLED) {
tmc_etr_disable_hw(drvdata);
+ drvdata->mode = CS_MODE_DISABLED;
+ }
spin_unlock_irqrestore(&drvdata->spinlock, flags);
@@ -253,7 +242,6 @@ const struct coresight_ops tmc_etr_cs_ops = {
int tmc_read_prepare_etr(struct tmc_drvdata *drvdata)
{
int ret = 0;
- long val;
unsigned long flags;
/* config types are set a boot time and never change */
@@ -266,9 +254,8 @@ int tmc_read_prepare_etr(struct tmc_drvdata *drvdata)
goto out;
}
- val = local_read(&drvdata->mode);
/* Don't interfere if operated from Perf */
- if (val == CS_MODE_PERF) {
+ if (drvdata->mode == CS_MODE_PERF) {
ret = -EINVAL;
goto out;
}
@@ -280,7 +267,7 @@ int tmc_read_prepare_etr(struct tmc_drvdata *drvdata)
}
/* Disable the TMC if need be */
- if (val == CS_MODE_SYSFS)
+ if (drvdata->mode == CS_MODE_SYSFS)
tmc_etr_disable_hw(drvdata);
drvdata->reading = true;
@@ -303,7 +290,7 @@ int tmc_read_unprepare_etr(struct tmc_drvdata *drvdata)
spin_lock_irqsave(&drvdata->spinlock, flags);
/* RE-enable the TMC if need be */
- if (local_read(&drvdata->mode) == CS_MODE_SYSFS) {
+ if (drvdata->mode == CS_MODE_SYSFS) {
/*
* The trace run will continue with the same allocated trace
* buffer. The trace buffer is cleared in tmc_etr_enable_hw(),
diff --git a/drivers/hwtracing/coresight/coresight-tmc.h b/drivers/hwtracing/coresight/coresight-tmc.h
index 44b3ae346118..51c01851533e 100644
--- a/drivers/hwtracing/coresight/coresight-tmc.h
+++ b/drivers/hwtracing/coresight/coresight-tmc.h
@@ -117,7 +117,7 @@ struct tmc_drvdata {
void __iomem *vaddr;
u32 size;
u32 len;
- local_t mode;
+ u32 mode;
enum tmc_config_type config_type;
enum tmc_mem_intf_width memwidth;
u32 trigger_cntr;
diff --git a/drivers/hwtracing/coresight/coresight.c b/drivers/hwtracing/coresight/coresight.c
index 7bf00a0beb6f..0c37356e417c 100644
--- a/drivers/hwtracing/coresight/coresight.c
+++ b/drivers/hwtracing/coresight/coresight.c
@@ -368,6 +368,52 @@ struct coresight_device *coresight_get_sink(struct list_head *path)
return csdev;
}
+static int coresight_enabled_sink(struct device *dev, void *data)
+{
+ bool *reset = data;
+ struct coresight_device *csdev = to_coresight_device(dev);
+
+ if ((csdev->type == CORESIGHT_DEV_TYPE_SINK ||
+ csdev->type == CORESIGHT_DEV_TYPE_LINKSINK) &&
+ csdev->activated) {
+ /*
+ * Now that we have a handle on the sink for this session,
+ * disable the sysFS "enable_sink" flag so that possible
+ * concurrent perf session that wish to use another sink don't
+ * trip on it. Doing so has no ramification for the current
+ * session.
+ */
+ if (*reset)
+ csdev->activated = false;
+
+ return 1;
+ }
+
+ return 0;
+}
+
+/**
+ * coresight_get_enabled_sink - returns the first enabled sink found on the bus
+ * @deactivate: Whether the 'enable_sink' flag should be reset
+ *
+ * When operated from perf the deactivate parameter should be set to 'true'.
+ * That way the "enabled_sink" flag of the sink that was selected can be reset,
+ * allowing for other concurrent perf sessions to choose a different sink.
+ *
+ * When operated from sysFS users have full control and as such the deactivate
+ * parameter should be set to 'false', hence mandating users to explicitly
+ * clear the flag.
+ */
+struct coresight_device *coresight_get_enabled_sink(bool deactivate)
+{
+ struct device *dev = NULL;
+
+ dev = bus_find_device(&coresight_bustype, NULL, &deactivate,
+ coresight_enabled_sink);
+
+ return dev ? to_coresight_device(dev) : NULL;
+}
+
/**
* _coresight_build_path - recursively build a path from a @csdev to a sink.
* @csdev: The device to start from.
@@ -380,6 +426,7 @@ struct coresight_device *coresight_get_sink(struct list_head *path)
* last one.
*/
static int _coresight_build_path(struct coresight_device *csdev,
+ struct coresight_device *sink,
struct list_head *path)
{
int i;
@@ -387,15 +434,15 @@ static int _coresight_build_path(struct coresight_device *csdev,
struct coresight_node *node;
/* An activated sink has been found. Enqueue the element */
- if ((csdev->type == CORESIGHT_DEV_TYPE_SINK ||
- csdev->type == CORESIGHT_DEV_TYPE_LINKSINK) && csdev->activated)
+ if (csdev == sink)
goto out;
/* Not a sink - recursively explore each port found on this element */
for (i = 0; i < csdev->nr_outport; i++) {
struct coresight_device *child_dev = csdev->conns[i].child_dev;
- if (child_dev && _coresight_build_path(child_dev, path) == 0) {
+ if (child_dev &&
+ _coresight_build_path(child_dev, sink, path) == 0) {
found = true;
break;
}
@@ -422,18 +469,22 @@ out:
return 0;
}
-struct list_head *coresight_build_path(struct coresight_device *csdev)
+struct list_head *coresight_build_path(struct coresight_device *source,
+ struct coresight_device *sink)
{
struct list_head *path;
int rc;
+ if (!sink)
+ return ERR_PTR(-EINVAL);
+
path = kzalloc(sizeof(struct list_head), GFP_KERNEL);
if (!path)
return ERR_PTR(-ENOMEM);
INIT_LIST_HEAD(path);
- rc = _coresight_build_path(csdev, path);
+ rc = _coresight_build_path(source, sink, path);
if (rc) {
kfree(path);
return ERR_PTR(rc);
@@ -497,6 +548,7 @@ static int coresight_validate_source(struct coresight_device *csdev,
int coresight_enable(struct coresight_device *csdev)
{
int cpu, ret = 0;
+ struct coresight_device *sink;
struct list_head *path;
mutex_lock(&coresight_mutex);
@@ -508,7 +560,17 @@ int coresight_enable(struct coresight_device *csdev)
if (csdev->enable)
goto out;
- path = coresight_build_path(csdev);
+ /*
+ * Search for a valid sink for this session but don't reset the
+ * "enable_sink" flag in sysFS. Users get to do that explicitly.
+ */
+ sink = coresight_get_enabled_sink(false);
+ if (!sink) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ path = coresight_build_path(csdev, sink);
if (IS_ERR(path)) {
pr_err("building path(s) failed\n");
ret = PTR_ERR(path);
diff --git a/drivers/hwtracing/intel_th/core.c b/drivers/hwtracing/intel_th/core.c
index 6f0a51a2c6ec..cdd9b3b26195 100644
--- a/drivers/hwtracing/intel_th/core.c
+++ b/drivers/hwtracing/intel_th/core.c
@@ -29,6 +29,9 @@
#include "intel_th.h"
#include "debug.h"
+static bool host_mode __read_mostly;
+module_param(host_mode, bool, 0444);
+
static DEFINE_IDA(intel_th_ida);
static int intel_th_match(struct device *dev, struct device_driver *driver)
@@ -380,7 +383,7 @@ static void intel_th_device_free(struct intel_th_device *thdev)
/*
* Intel(R) Trace Hub subdevices
*/
-static struct intel_th_subdevice {
+static const struct intel_th_subdevice {
const char *name;
struct resource res[3];
unsigned nres;
@@ -527,14 +530,19 @@ static int intel_th_populate(struct intel_th *th, struct resource *devres,
{
struct resource res[3];
unsigned int req = 0;
- int i, err;
+ int src, dst, err;
/* create devices for each intel_th_subdevice */
- for (i = 0; i < ARRAY_SIZE(intel_th_subdevices); i++) {
- struct intel_th_subdevice *subdev = &intel_th_subdevices[i];
+ for (src = 0, dst = 0; src < ARRAY_SIZE(intel_th_subdevices); src++) {
+ const struct intel_th_subdevice *subdev =
+ &intel_th_subdevices[src];
struct intel_th_device *thdev;
int r;
+ /* only allow SOURCE and SWITCH devices in host mode */
+ if (host_mode && subdev->type == INTEL_TH_OUTPUT)
+ continue;
+
thdev = intel_th_device_alloc(th, subdev->type, subdev->name,
subdev->id);
if (!thdev) {
@@ -577,10 +585,12 @@ static int intel_th_populate(struct intel_th *th, struct resource *devres,
}
if (subdev->type == INTEL_TH_OUTPUT) {
- thdev->dev.devt = MKDEV(th->major, i);
+ thdev->dev.devt = MKDEV(th->major, dst);
thdev->output.type = subdev->otype;
thdev->output.port = -1;
thdev->output.scratchpad = subdev->scrpd;
+ } else if (subdev->type == INTEL_TH_SWITCH) {
+ thdev->host_mode = host_mode;
}
err = device_add(&thdev->dev);
@@ -597,14 +607,14 @@ static int intel_th_populate(struct intel_th *th, struct resource *devres,
req++;
}
- th->thdev[i] = thdev;
+ th->thdev[dst++] = thdev;
}
return 0;
kill_subdevs:
- for (i-- ; i >= 0; i--)
- intel_th_device_remove(th->thdev[i]);
+ for (; dst >= 0; dst--)
+ intel_th_device_remove(th->thdev[dst]);
return err;
}
@@ -717,7 +727,7 @@ void intel_th_free(struct intel_th *th)
intel_th_request_hub_module_flush(th);
for (i = 0; i < TH_SUBDEVICE_MAX; i++)
- if (th->thdev[i] != th->hub)
+ if (th->thdev[i] && th->thdev[i] != th->hub)
intel_th_device_remove(th->thdev[i]);
intel_th_device_remove(th->hub);
diff --git a/drivers/hwtracing/intel_th/gth.c b/drivers/hwtracing/intel_th/gth.c
index 33e09369a491..dd32d0bad687 100644
--- a/drivers/hwtracing/intel_th/gth.c
+++ b/drivers/hwtracing/intel_th/gth.c
@@ -564,6 +564,9 @@ static int intel_th_gth_assign(struct intel_th_device *thdev,
struct gth_device *gth = dev_get_drvdata(&thdev->dev);
int i, id;
+ if (thdev->host_mode)
+ return -EBUSY;
+
if (othdev->type != INTEL_TH_OUTPUT)
return -EINVAL;
@@ -600,6 +603,9 @@ static void intel_th_gth_unassign(struct intel_th_device *thdev,
struct gth_device *gth = dev_get_drvdata(&thdev->dev);
int port = othdev->output.port;
+ if (thdev->host_mode)
+ return;
+
spin_lock(&gth->gth_lock);
othdev->output.port = -1;
othdev->output.active = false;
@@ -654,9 +660,24 @@ static int intel_th_gth_probe(struct intel_th_device *thdev)
gth->base = base;
spin_lock_init(&gth->gth_lock);
+ /*
+ * Host mode can be signalled via SW means or via SCRPD_DEBUGGER_IN_USE
+ * bit. Either way, don't reset HW in this case, and don't export any
+ * capture configuration attributes. Also, refuse to assign output
+ * drivers to ports, see intel_th_gth_assign().
+ */
+ if (thdev->host_mode)
+ goto done;
+
ret = intel_th_gth_reset(gth);
- if (ret)
- return ret;
+ if (ret) {
+ if (ret != -EBUSY)
+ return ret;
+
+ thdev->host_mode = true;
+
+ goto done;
+ }
for (i = 0; i < TH_CONFIGURABLE_MASTERS + 1; i++)
gth->master[i] = -1;
@@ -677,6 +698,7 @@ static int intel_th_gth_probe(struct intel_th_device *thdev)
return -ENOMEM;
}
+done:
dev_set_drvdata(dev, gth);
return 0;
diff --git a/drivers/hwtracing/intel_th/intel_th.h b/drivers/hwtracing/intel_th/intel_th.h
index 4c195786bf1f..3096e7054f6d 100644
--- a/drivers/hwtracing/intel_th/intel_th.h
+++ b/drivers/hwtracing/intel_th/intel_th.h
@@ -54,6 +54,7 @@ struct intel_th_output {
* @num_resources: number of resources in @resource array
* @type: INTEL_TH_{SOURCE,OUTPUT,SWITCH}
* @id: device instance or -1
+ * @host_mode: Intel TH is controlled by an external debug host
* @output: output descriptor for INTEL_TH_OUTPUT devices
* @name: device name to match the driver
*/
@@ -64,6 +65,9 @@ struct intel_th_device {
unsigned int type;
int id;
+ /* INTEL_TH_SWITCH specific */
+ bool host_mode;
+
/* INTEL_TH_OUTPUT specific */
struct intel_th_output output;
diff --git a/drivers/hwtracing/stm/core.c b/drivers/hwtracing/stm/core.c
index 51f81d64ca37..a6ea387b5b00 100644
--- a/drivers/hwtracing/stm/core.c
+++ b/drivers/hwtracing/stm/core.c
@@ -361,7 +361,7 @@ static int stm_char_open(struct inode *inode, struct file *file)
struct stm_file *stmf;
struct device *dev;
unsigned int major = imajor(inode);
- int err = -ENODEV;
+ int err = -ENOMEM;
dev = class_find_device(&stm_class, NULL, &major, major_match);
if (!dev)
@@ -369,8 +369,9 @@ static int stm_char_open(struct inode *inode, struct file *file)
stmf = kzalloc(sizeof(*stmf), GFP_KERNEL);
if (!stmf)
- return -ENOMEM;
+ goto err_put_device;
+ err = -ENODEV;
stm_output_init(&stmf->output);
stmf->stm = to_stm_device(dev);
@@ -382,9 +383,10 @@ static int stm_char_open(struct inode *inode, struct file *file)
return nonseekable_open(inode, file);
err_free:
+ kfree(stmf);
+err_put_device:
/* matches class_find_device() above */
put_device(dev);
- kfree(stmf);
return err;
}
diff --git a/drivers/lightnvm/core.c b/drivers/lightnvm/core.c
index 7622e3dc5d82..02240a0b39c9 100644
--- a/drivers/lightnvm/core.c
+++ b/drivers/lightnvm/core.c
@@ -22,7 +22,7 @@
#include <linux/types.h>
#include <linux/sem.h>
#include <linux/bitmap.h>
-#include <linux/module.h>
+#include <linux/moduleparam.h>
#include <linux/miscdevice.h>
#include <linux/lightnvm.h>
#include <linux/sched/sysctl.h>
@@ -1129,10 +1129,4 @@ static struct miscdevice _nvm_misc = {
.nodename = "lightnvm/control",
.fops = &_ctl_fops,
};
-module_misc_device(_nvm_misc);
-
-MODULE_ALIAS_MISCDEV(MISC_DYNAMIC_MINOR);
-
-MODULE_AUTHOR("Matias Bjorling <m@bjorling.me>");
-MODULE_LICENSE("GPL v2");
-MODULE_VERSION("0.1");
+builtin_misc_device(_nvm_misc);
diff --git a/drivers/mcb/mcb-parse.c b/drivers/mcb/mcb-parse.c
index 4ca2739b4fad..ee7fb6ec96bd 100644
--- a/drivers/mcb/mcb-parse.c
+++ b/drivers/mcb/mcb-parse.c
@@ -149,7 +149,7 @@ static int chameleon_get_bar(char __iomem **base, phys_addr_t mapbase,
reg = readl(*base);
bar_count = BAR_CNT(reg);
- if (bar_count <= 0 && bar_count > CHAMELEON_BAR_MAX)
+ if (bar_count <= 0 || bar_count > CHAMELEON_BAR_MAX)
return -ENODEV;
c = kcalloc(bar_count, sizeof(struct chameleon_bar),
diff --git a/drivers/misc/genwqe/card_base.h b/drivers/misc/genwqe/card_base.h
index cb851c14ca4b..5813b5f25006 100644
--- a/drivers/misc/genwqe/card_base.h
+++ b/drivers/misc/genwqe/card_base.h
@@ -41,7 +41,6 @@
#include "genwqe_driver.h"
#define GENWQE_MSI_IRQS 4 /* Just one supported, no MSIx */
-#define GENWQE_FLAG_MSI_ENABLED (1 << 0)
#define GENWQE_MAX_VFS 15 /* maximum 15 VFs are possible */
#define GENWQE_MAX_FUNCS 16 /* 1 PF and 15 VFs */
diff --git a/drivers/misc/genwqe/card_utils.c b/drivers/misc/genwqe/card_utils.c
index fc2794b513fa..147b83011b58 100644
--- a/drivers/misc/genwqe/card_utils.c
+++ b/drivers/misc/genwqe/card_utils.c
@@ -740,13 +740,10 @@ int genwqe_read_softreset(struct genwqe_dev *cd)
int genwqe_set_interrupt_capability(struct genwqe_dev *cd, int count)
{
int rc;
- struct pci_dev *pci_dev = cd->pci_dev;
- rc = pci_enable_msi_range(pci_dev, 1, count);
+ rc = pci_alloc_irq_vectors(cd->pci_dev, 1, count, PCI_IRQ_MSI);
if (rc < 0)
return rc;
-
- cd->flags |= GENWQE_FLAG_MSI_ENABLED;
return 0;
}
@@ -756,12 +753,7 @@ int genwqe_set_interrupt_capability(struct genwqe_dev *cd, int count)
*/
void genwqe_reset_interrupt_capability(struct genwqe_dev *cd)
{
- struct pci_dev *pci_dev = cd->pci_dev;
-
- if (cd->flags & GENWQE_FLAG_MSI_ENABLED) {
- pci_disable_msi(pci_dev);
- cd->flags &= ~GENWQE_FLAG_MSI_ENABLED;
- }
+ pci_free_irq_vectors(cd->pci_dev);
}
/**
diff --git a/drivers/misc/lkdtm_bugs.c b/drivers/misc/lkdtm_bugs.c
index f336206d4b1f..91edd0b55e5c 100644
--- a/drivers/misc/lkdtm_bugs.c
+++ b/drivers/misc/lkdtm_bugs.c
@@ -85,7 +85,8 @@ noinline void lkdtm_CORRUPT_STACK(void)
/* Use default char array length that triggers stack protection. */
char data[8];
- memset((void *)data, 0, 64);
+ memset((void *)data, 'a', 64);
+ pr_info("Corrupted stack with '%16s'...\n", data);
}
void lkdtm_UNALIGNED_LOAD_STORE_WRITE(void)
diff --git a/drivers/misc/lkdtm_perms.c b/drivers/misc/lkdtm_perms.c
index 45f1c0f96612..c7635a79341f 100644
--- a/drivers/misc/lkdtm_perms.c
+++ b/drivers/misc/lkdtm_perms.c
@@ -60,15 +60,18 @@ static noinline void execute_location(void *dst, bool write)
static void execute_user_location(void *dst)
{
+ int copied;
+
/* Intentionally crossing kernel/user memory boundary. */
void (*func)(void) = dst;
pr_info("attempting ok execution at %p\n", do_nothing);
do_nothing();
- if (copy_to_user((void __user *)dst, do_nothing, EXEC_SIZE))
+ copied = access_process_vm(current, (unsigned long)dst, do_nothing,
+ EXEC_SIZE, FOLL_WRITE);
+ if (copied < EXEC_SIZE)
return;
- flush_icache_range((unsigned long)dst, (unsigned long)dst + EXEC_SIZE);
pr_info("attempting bad execution at %p\n", func);
func();
}
diff --git a/drivers/misc/mei/amthif.c b/drivers/misc/mei/amthif.c
index 7ae89b4a21d5..466afb2611c6 100644
--- a/drivers/misc/mei/amthif.c
+++ b/drivers/misc/mei/amthif.c
@@ -144,7 +144,7 @@ int mei_amthif_run_next_cmd(struct mei_device *dev)
dev->iamthif_state = MEI_IAMTHIF_WRITING;
cl->fp = cb->fp;
- ret = mei_cl_write(cl, cb, false);
+ ret = mei_cl_write(cl, cb);
if (ret < 0)
return ret;
diff --git a/drivers/misc/mei/bus-fixup.c b/drivers/misc/mei/bus-fixup.c
index 75b9d4ac8b1e..18e05ca7584f 100644
--- a/drivers/misc/mei/bus-fixup.c
+++ b/drivers/misc/mei/bus-fixup.c
@@ -38,6 +38,9 @@ static const uuid_le mei_nfc_info_guid = MEI_UUID_NFC_INFO;
#define MEI_UUID_WD UUID_LE(0x05B79A6F, 0x4628, 0x4D7F, \
0x89, 0x9D, 0xA9, 0x15, 0x14, 0xCB, 0x32, 0xAB)
+#define MEI_UUID_MKHIF_FIX UUID_LE(0x55213584, 0x9a29, 0x4916, \
+ 0xba, 0xdf, 0xf, 0xb7, 0xed, 0x68, 0x2a, 0xeb)
+
#define MEI_UUID_ANY NULL_UUID_LE
/**
@@ -69,6 +72,97 @@ static void blacklist(struct mei_cl_device *cldev)
cldev->do_match = 0;
}
+#define OSTYPE_LINUX 2
+struct mei_os_ver {
+ __le16 build;
+ __le16 reserved1;
+ u8 os_type;
+ u8 major;
+ u8 minor;
+ u8 reserved2;
+} __packed;
+
+#define MKHI_FEATURE_PTT 0x10
+
+struct mkhi_rule_id {
+ __le16 rule_type;
+ u8 feature_id;
+ u8 reserved;
+} __packed;
+
+struct mkhi_fwcaps {
+ struct mkhi_rule_id id;
+ u8 len;
+ u8 data[0];
+} __packed;
+
+#define MKHI_FWCAPS_GROUP_ID 0x3
+#define MKHI_FWCAPS_SET_OS_VER_APP_RULE_CMD 6
+struct mkhi_msg_hdr {
+ u8 group_id;
+ u8 command;
+ u8 reserved;
+ u8 result;
+} __packed;
+
+struct mkhi_msg {
+ struct mkhi_msg_hdr hdr;
+ u8 data[0];
+} __packed;
+
+static int mei_osver(struct mei_cl_device *cldev)
+{
+ int ret;
+ const size_t size = sizeof(struct mkhi_msg_hdr) +
+ sizeof(struct mkhi_fwcaps) +
+ sizeof(struct mei_os_ver);
+ size_t length = 8;
+ char buf[size];
+ struct mkhi_msg *req;
+ struct mkhi_fwcaps *fwcaps;
+ struct mei_os_ver *os_ver;
+ unsigned int mode = MEI_CL_IO_TX_BLOCKING | MEI_CL_IO_TX_INTERNAL;
+
+ memset(buf, 0, size);
+
+ req = (struct mkhi_msg *)buf;
+ req->hdr.group_id = MKHI_FWCAPS_GROUP_ID;
+ req->hdr.command = MKHI_FWCAPS_SET_OS_VER_APP_RULE_CMD;
+
+ fwcaps = (struct mkhi_fwcaps *)req->data;
+
+ fwcaps->id.rule_type = 0x0;
+ fwcaps->id.feature_id = MKHI_FEATURE_PTT;
+ fwcaps->len = sizeof(*os_ver);
+ os_ver = (struct mei_os_ver *)fwcaps->data;
+ os_ver->os_type = OSTYPE_LINUX;
+
+ ret = __mei_cl_send(cldev->cl, buf, size, mode);
+ if (ret < 0)
+ return ret;
+
+ ret = __mei_cl_recv(cldev->cl, buf, length, 0);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static void mei_mkhi_fix(struct mei_cl_device *cldev)
+{
+ int ret;
+
+ ret = mei_cldev_enable(cldev);
+ if (ret)
+ return;
+
+ ret = mei_osver(cldev);
+ if (ret)
+ dev_err(&cldev->dev, "OS version command failed %d\n", ret);
+
+ mei_cldev_disable(cldev);
+}
+
/**
* mei_wd - wd client on the bus, change protocol version
* as the API has changed.
@@ -162,7 +256,8 @@ static int mei_nfc_if_version(struct mei_cl *cl,
WARN_ON(mutex_is_locked(&bus->device_lock));
- ret = __mei_cl_send(cl, (u8 *)&cmd, sizeof(struct mei_nfc_cmd), 1);
+ ret = __mei_cl_send(cl, (u8 *)&cmd, sizeof(struct mei_nfc_cmd),
+ MEI_CL_IO_TX_BLOCKING);
if (ret < 0) {
dev_err(bus->dev, "Could not send IF version cmd\n");
return ret;
@@ -177,7 +272,7 @@ static int mei_nfc_if_version(struct mei_cl *cl,
return -ENOMEM;
ret = 0;
- bytes_recv = __mei_cl_recv(cl, (u8 *)reply, if_version_length);
+ bytes_recv = __mei_cl_recv(cl, (u8 *)reply, if_version_length, 0);
if (bytes_recv < if_version_length) {
dev_err(bus->dev, "Could not read IF version\n");
ret = -EIO;
@@ -309,6 +404,7 @@ static struct mei_fixup {
MEI_FIXUP(MEI_UUID_NFC_INFO, blacklist),
MEI_FIXUP(MEI_UUID_NFC_HCI, mei_nfc),
MEI_FIXUP(MEI_UUID_WD, mei_wd),
+ MEI_FIXUP(MEI_UUID_MKHIF_FIX, mei_mkhi_fix),
};
/**
diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c
index 8cac7ef9ad0d..0037153c80a6 100644
--- a/drivers/misc/mei/bus.c
+++ b/drivers/misc/mei/bus.c
@@ -36,12 +36,12 @@
* @cl: host client
* @buf: buffer to send
* @length: buffer length
- * @blocking: wait for write completion
+ * @mode: sending mode
*
* Return: written size bytes or < 0 on error
*/
ssize_t __mei_cl_send(struct mei_cl *cl, u8 *buf, size_t length,
- bool blocking)
+ unsigned int mode)
{
struct mei_device *bus;
struct mei_cl_cb *cb;
@@ -80,9 +80,11 @@ ssize_t __mei_cl_send(struct mei_cl *cl, u8 *buf, size_t length,
goto out;
}
+ cb->internal = !!(mode & MEI_CL_IO_TX_INTERNAL);
+ cb->blocking = !!(mode & MEI_CL_IO_TX_BLOCKING);
memcpy(cb->buf.data, buf, length);
- rets = mei_cl_write(cl, cb, blocking);
+ rets = mei_cl_write(cl, cb);
out:
mutex_unlock(&bus->device_lock);
@@ -96,15 +98,18 @@ out:
* @cl: host client
* @buf: buffer to receive
* @length: buffer length
+ * @mode: io mode
*
* Return: read size in bytes of < 0 on error
*/
-ssize_t __mei_cl_recv(struct mei_cl *cl, u8 *buf, size_t length)
+ssize_t __mei_cl_recv(struct mei_cl *cl, u8 *buf, size_t length,
+ unsigned int mode)
{
struct mei_device *bus;
struct mei_cl_cb *cb;
size_t r_length;
ssize_t rets;
+ bool nonblock = !!(mode & MEI_CL_IO_RX_NONBLOCK);
if (WARN_ON(!cl || !cl->dev))
return -ENODEV;
@@ -125,6 +130,11 @@ ssize_t __mei_cl_recv(struct mei_cl *cl, u8 *buf, size_t length)
if (rets && rets != -EBUSY)
goto out;
+ if (nonblock) {
+ rets = -EAGAIN;
+ goto out;
+ }
+
/* wait on event only if there is no other waiter */
/* synchronized under device mutex */
if (!waitqueue_active(&cl->rx_wait)) {
@@ -185,14 +195,30 @@ ssize_t mei_cldev_send(struct mei_cl_device *cldev, u8 *buf, size_t length)
{
struct mei_cl *cl = cldev->cl;
- if (cl == NULL)
- return -ENODEV;
-
- return __mei_cl_send(cl, buf, length, 1);
+ return __mei_cl_send(cl, buf, length, MEI_CL_IO_TX_BLOCKING);
}
EXPORT_SYMBOL_GPL(mei_cldev_send);
/**
+ * mei_cldev_recv_nonblock - non block client receive (read)
+ *
+ * @cldev: me client device
+ * @buf: buffer to receive
+ * @length: buffer length
+ *
+ * Return: read size in bytes of < 0 on error
+ * -EAGAIN if function will block.
+ */
+ssize_t mei_cldev_recv_nonblock(struct mei_cl_device *cldev, u8 *buf,
+ size_t length)
+{
+ struct mei_cl *cl = cldev->cl;
+
+ return __mei_cl_recv(cl, buf, length, MEI_CL_IO_RX_NONBLOCK);
+}
+EXPORT_SYMBOL_GPL(mei_cldev_recv_nonblock);
+
+/**
* mei_cldev_recv - client receive (read)
*
* @cldev: me client device
@@ -205,39 +231,45 @@ ssize_t mei_cldev_recv(struct mei_cl_device *cldev, u8 *buf, size_t length)
{
struct mei_cl *cl = cldev->cl;
- if (cl == NULL)
- return -ENODEV;
-
- return __mei_cl_recv(cl, buf, length);
+ return __mei_cl_recv(cl, buf, length, 0);
}
EXPORT_SYMBOL_GPL(mei_cldev_recv);
/**
- * mei_cl_bus_event_work - dispatch rx event for a bus device
- * and schedule new work
+ * mei_cl_bus_rx_work - dispatch rx event for a bus device
*
* @work: work
*/
-static void mei_cl_bus_event_work(struct work_struct *work)
+static void mei_cl_bus_rx_work(struct work_struct *work)
{
struct mei_cl_device *cldev;
struct mei_device *bus;
- cldev = container_of(work, struct mei_cl_device, event_work);
+ cldev = container_of(work, struct mei_cl_device, rx_work);
bus = cldev->bus;
- if (cldev->event_cb)
- cldev->event_cb(cldev, cldev->events, cldev->event_context);
+ if (cldev->rx_cb)
+ cldev->rx_cb(cldev);
+
+ mutex_lock(&bus->device_lock);
+ mei_cl_read_start(cldev->cl, mei_cl_mtu(cldev->cl), NULL);
+ mutex_unlock(&bus->device_lock);
+}
+
+/**
+ * mei_cl_bus_notif_work - dispatch FW notif event for a bus device
+ *
+ * @work: work
+ */
+static void mei_cl_bus_notif_work(struct work_struct *work)
+{
+ struct mei_cl_device *cldev;
- cldev->events = 0;
+ cldev = container_of(work, struct mei_cl_device, notif_work);
- /* Prepare for the next read */
- if (cldev->events_mask & BIT(MEI_CL_EVENT_RX)) {
- mutex_lock(&bus->device_lock);
- mei_cl_read_start(cldev->cl, mei_cl_mtu(cldev->cl), NULL);
- mutex_unlock(&bus->device_lock);
- }
+ if (cldev->notif_cb)
+ cldev->notif_cb(cldev);
}
/**
@@ -252,18 +284,13 @@ bool mei_cl_bus_notify_event(struct mei_cl *cl)
{
struct mei_cl_device *cldev = cl->cldev;
- if (!cldev || !cldev->event_cb)
- return false;
-
- if (!(cldev->events_mask & BIT(MEI_CL_EVENT_NOTIF)))
+ if (!cldev || !cldev->notif_cb)
return false;
if (!cl->notify_ev)
return false;
- set_bit(MEI_CL_EVENT_NOTIF, &cldev->events);
-
- schedule_work(&cldev->event_work);
+ schedule_work(&cldev->notif_work);
cl->notify_ev = false;
@@ -271,7 +298,7 @@ bool mei_cl_bus_notify_event(struct mei_cl *cl)
}
/**
- * mei_cl_bus_rx_event - schedule rx event
+ * mei_cl_bus_rx_event - schedule rx event
*
* @cl: host client
*
@@ -282,66 +309,81 @@ bool mei_cl_bus_rx_event(struct mei_cl *cl)
{
struct mei_cl_device *cldev = cl->cldev;
- if (!cldev || !cldev->event_cb)
- return false;
-
- if (!(cldev->events_mask & BIT(MEI_CL_EVENT_RX)))
+ if (!cldev || !cldev->rx_cb)
return false;
- set_bit(MEI_CL_EVENT_RX, &cldev->events);
-
- schedule_work(&cldev->event_work);
+ schedule_work(&cldev->rx_work);
return true;
}
/**
- * mei_cldev_register_event_cb - register event callback
+ * mei_cldev_register_rx_cb - register Rx event callback
*
* @cldev: me client devices
- * @event_cb: callback function
- * @events_mask: requested events bitmask
- * @context: driver context data
+ * @rx_cb: callback function
*
* Return: 0 on success
* -EALREADY if an callback is already registered
* <0 on other errors
*/
-int mei_cldev_register_event_cb(struct mei_cl_device *cldev,
- unsigned long events_mask,
- mei_cldev_event_cb_t event_cb, void *context)
+int mei_cldev_register_rx_cb(struct mei_cl_device *cldev, mei_cldev_cb_t rx_cb)
{
struct mei_device *bus = cldev->bus;
int ret;
- if (cldev->event_cb)
+ if (!rx_cb)
+ return -EINVAL;
+ if (cldev->rx_cb)
return -EALREADY;
- cldev->events = 0;
- cldev->events_mask = events_mask;
- cldev->event_cb = event_cb;
- cldev->event_context = context;
- INIT_WORK(&cldev->event_work, mei_cl_bus_event_work);
+ cldev->rx_cb = rx_cb;
+ INIT_WORK(&cldev->rx_work, mei_cl_bus_rx_work);
- if (cldev->events_mask & BIT(MEI_CL_EVENT_RX)) {
- mutex_lock(&bus->device_lock);
- ret = mei_cl_read_start(cldev->cl, mei_cl_mtu(cldev->cl), NULL);
- mutex_unlock(&bus->device_lock);
- if (ret && ret != -EBUSY)
- return ret;
- }
+ mutex_lock(&bus->device_lock);
+ ret = mei_cl_read_start(cldev->cl, mei_cl_mtu(cldev->cl), NULL);
+ mutex_unlock(&bus->device_lock);
+ if (ret && ret != -EBUSY)
+ return ret;
- if (cldev->events_mask & BIT(MEI_CL_EVENT_NOTIF)) {
- mutex_lock(&bus->device_lock);
- ret = mei_cl_notify_request(cldev->cl, NULL, event_cb ? 1 : 0);
- mutex_unlock(&bus->device_lock);
- if (ret)
- return ret;
- }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mei_cldev_register_rx_cb);
+
+/**
+ * mei_cldev_register_notif_cb - register FW notification event callback
+ *
+ * @cldev: me client devices
+ * @notif_cb: callback function
+ *
+ * Return: 0 on success
+ * -EALREADY if an callback is already registered
+ * <0 on other errors
+ */
+int mei_cldev_register_notif_cb(struct mei_cl_device *cldev,
+ mei_cldev_cb_t notif_cb)
+{
+ struct mei_device *bus = cldev->bus;
+ int ret;
+
+ if (!notif_cb)
+ return -EINVAL;
+
+ if (cldev->notif_cb)
+ return -EALREADY;
+
+ cldev->notif_cb = notif_cb;
+ INIT_WORK(&cldev->notif_work, mei_cl_bus_notif_work);
+
+ mutex_lock(&bus->device_lock);
+ ret = mei_cl_notify_request(cldev->cl, NULL, 1);
+ mutex_unlock(&bus->device_lock);
+ if (ret)
+ return ret;
return 0;
}
-EXPORT_SYMBOL_GPL(mei_cldev_register_event_cb);
+EXPORT_SYMBOL_GPL(mei_cldev_register_notif_cb);
/**
* mei_cldev_get_drvdata - driver data getter
@@ -403,7 +445,7 @@ EXPORT_SYMBOL_GPL(mei_cldev_ver);
*/
bool mei_cldev_enabled(struct mei_cl_device *cldev)
{
- return cldev->cl && mei_cl_is_connected(cldev->cl);
+ return mei_cl_is_connected(cldev->cl);
}
EXPORT_SYMBOL_GPL(mei_cldev_enabled);
@@ -423,14 +465,13 @@ int mei_cldev_enable(struct mei_cl_device *cldev)
cl = cldev->cl;
- if (!cl) {
+ if (cl->state == MEI_FILE_UNINITIALIZED) {
mutex_lock(&bus->device_lock);
- cl = mei_cl_alloc_linked(bus);
+ ret = mei_cl_link(cl);
mutex_unlock(&bus->device_lock);
- if (IS_ERR(cl))
- return PTR_ERR(cl);
+ if (ret)
+ return ret;
/* update pointers */
- cldev->cl = cl;
cl->cldev = cldev;
}
@@ -471,19 +512,17 @@ int mei_cldev_disable(struct mei_cl_device *cldev)
struct mei_cl *cl;
int err;
- if (!cldev || !cldev->cl)
+ if (!cldev)
return -ENODEV;
cl = cldev->cl;
bus = cldev->bus;
- cldev->event_cb = NULL;
-
mutex_lock(&bus->device_lock);
if (!mei_cl_is_connected(cl)) {
- dev_err(bus->dev, "Already disconnected");
+ dev_dbg(bus->dev, "Already disconnected");
err = 0;
goto out;
}
@@ -497,9 +536,6 @@ out:
mei_cl_flush_queues(cl, NULL);
mei_cl_unlink(cl);
- kfree(cl);
- cldev->cl = NULL;
-
mutex_unlock(&bus->device_lock);
return err;
}
@@ -629,9 +665,13 @@ static int mei_cl_device_remove(struct device *dev)
if (!cldev || !dev->driver)
return 0;
- if (cldev->event_cb) {
- cldev->event_cb = NULL;
- cancel_work_sync(&cldev->event_work);
+ if (cldev->rx_cb) {
+ cancel_work_sync(&cldev->rx_work);
+ cldev->rx_cb = NULL;
+ }
+ if (cldev->notif_cb) {
+ cancel_work_sync(&cldev->notif_work);
+ cldev->notif_cb = NULL;
}
cldrv = to_mei_cl_driver(dev->driver);
@@ -754,6 +794,7 @@ static void mei_cl_bus_dev_release(struct device *dev)
mei_me_cl_put(cldev->me_cl);
mei_dev_bus_put(cldev->bus);
+ kfree(cldev->cl);
kfree(cldev);
}
@@ -786,17 +827,25 @@ static struct mei_cl_device *mei_cl_bus_dev_alloc(struct mei_device *bus,
struct mei_me_client *me_cl)
{
struct mei_cl_device *cldev;
+ struct mei_cl *cl;
cldev = kzalloc(sizeof(struct mei_cl_device), GFP_KERNEL);
if (!cldev)
return NULL;
+ cl = mei_cl_allocate(bus);
+ if (!cl) {
+ kfree(cldev);
+ return NULL;
+ }
+
device_initialize(&cldev->dev);
cldev->dev.parent = bus->dev;
cldev->dev.bus = &mei_cl_bus_type;
cldev->dev.type = &mei_cl_device_type;
cldev->bus = mei_dev_bus_get(bus);
cldev->me_cl = mei_me_cl_get(me_cl);
+ cldev->cl = cl;
mei_cl_bus_set_name(cldev);
cldev->is_added = 0;
INIT_LIST_HEAD(&cldev->bus_list);
diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c
index 6fe02350578d..391936c1aa04 100644
--- a/drivers/misc/mei/client.c
+++ b/drivers/misc/mei/client.c
@@ -425,7 +425,7 @@ static inline void mei_io_list_free(struct mei_cl_cb *list, struct mei_cl *cl)
*
* @cl: host client
* @length: size of the buffer
- * @type: operation type
+ * @fop_type: operation type
* @fp: associated file pointer (might be NULL)
*
* Return: cb on success and NULL on failure
@@ -459,7 +459,7 @@ struct mei_cl_cb *mei_cl_alloc_cb(struct mei_cl *cl, size_t length,
*
* @cl: host client
* @length: size of the buffer
- * @type: operation type
+ * @fop_type: operation type
* @fp: associated file pointer (might be NULL)
*
* Return: cb on success and NULL on failure
@@ -571,7 +571,7 @@ void mei_cl_init(struct mei_cl *cl, struct mei_device *dev)
INIT_LIST_HEAD(&cl->rd_pending);
INIT_LIST_HEAD(&cl->link);
cl->writing_state = MEI_IDLE;
- cl->state = MEI_FILE_INITIALIZING;
+ cl->state = MEI_FILE_UNINITIALIZED;
cl->dev = dev;
}
@@ -672,7 +672,12 @@ int mei_cl_unlink(struct mei_cl *cl)
list_del_init(&cl->link);
- cl->state = MEI_FILE_INITIALIZING;
+ cl->state = MEI_FILE_UNINITIALIZED;
+ cl->writing_state = MEI_IDLE;
+
+ WARN_ON(!list_empty(&cl->rd_completed) ||
+ !list_empty(&cl->rd_pending) ||
+ !list_empty(&cl->link));
return 0;
}
@@ -686,7 +691,7 @@ void mei_host_client_init(struct mei_device *dev)
pm_runtime_mark_last_busy(dev->dev);
dev_dbg(dev->dev, "rpm: autosuspend\n");
- pm_runtime_autosuspend(dev->dev);
+ pm_request_autosuspend(dev->dev);
}
/**
@@ -756,7 +761,7 @@ void mei_cl_set_disconnected(struct mei_cl *cl)
struct mei_device *dev = cl->dev;
if (cl->state == MEI_FILE_DISCONNECTED ||
- cl->state == MEI_FILE_INITIALIZING)
+ cl->state <= MEI_FILE_INITIALIZING)
return;
cl->state = MEI_FILE_DISCONNECTED;
@@ -1598,18 +1603,17 @@ int mei_cl_irq_write(struct mei_cl *cl, struct mei_cl_cb *cb,
*
* @cl: host client
* @cb: write callback with filled data
- * @blocking: block until completed
*
* Return: number of bytes sent on success, <0 on failure.
*/
-int mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb, bool blocking)
+int mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb)
{
struct mei_device *dev;
struct mei_msg_data *buf;
struct mei_msg_hdr mei_hdr;
int size;
int rets;
-
+ bool blocking;
if (WARN_ON(!cl || !cl->dev))
return -ENODEV;
@@ -1621,6 +1625,7 @@ int mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb, bool blocking)
buf = &cb->buf;
size = buf->size;
+ blocking = cb->blocking;
cl_dbg(dev, cl, "size=%d\n", size);
diff --git a/drivers/misc/mei/client.h b/drivers/misc/mei/client.h
index d2bfabecd882..f2545af9be7b 100644
--- a/drivers/misc/mei/client.h
+++ b/drivers/misc/mei/client.h
@@ -219,7 +219,7 @@ int mei_cl_irq_connect(struct mei_cl *cl, struct mei_cl_cb *cb,
int mei_cl_read_start(struct mei_cl *cl, size_t length, const struct file *fp);
int mei_cl_irq_read_msg(struct mei_cl *cl, struct mei_msg_hdr *hdr,
struct mei_cl_cb *cmpl_list);
-int mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb, bool blocking);
+int mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb);
int mei_cl_irq_write(struct mei_cl *cl, struct mei_cl_cb *cb,
struct mei_cl_cb *cmpl_list);
diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h
index 7ad15d678878..c8307e8b4c16 100644
--- a/drivers/misc/mei/hw-me-regs.h
+++ b/drivers/misc/mei/hw-me-regs.h
@@ -122,6 +122,8 @@
#define MEI_DEV_ID_SPT_H 0xA13A /* Sunrise Point H */
#define MEI_DEV_ID_SPT_H_2 0xA13B /* Sunrise Point H 2 */
+#define MEI_DEV_ID_LBG 0xA1BA /* Lewisburg (SPT) */
+
#define MEI_DEV_ID_BXT_M 0x1A9A /* Broxton M */
#define MEI_DEV_ID_APL_I 0x5A9A /* Apollo Lake I */
diff --git a/drivers/misc/mei/hw-me.c b/drivers/misc/mei/hw-me.c
index 56c2101e80ad..a05375a3338a 100644
--- a/drivers/misc/mei/hw-me.c
+++ b/drivers/misc/mei/hw-me.c
@@ -246,6 +246,36 @@ static inline enum mei_pg_state mei_me_pg_state(struct mei_device *dev)
return hw->pg_state;
}
+static inline u32 me_intr_src(u32 hcsr)
+{
+ return hcsr & H_CSR_IS_MASK;
+}
+
+/**
+ * me_intr_disable - disables mei device interrupts
+ * using supplied hcsr register value.
+ *
+ * @dev: the device structure
+ * @hcsr: supplied hcsr register value
+ */
+static inline void me_intr_disable(struct mei_device *dev, u32 hcsr)
+{
+ hcsr &= ~H_CSR_IE_MASK;
+ mei_hcsr_set(dev, hcsr);
+}
+
+/**
+ * mei_me_intr_clear - clear and stop interrupts
+ *
+ * @dev: the device structure
+ * @hcsr: supplied hcsr register value
+ */
+static inline void me_intr_clear(struct mei_device *dev, u32 hcsr)
+{
+ if (me_intr_src(hcsr))
+ mei_hcsr_write(dev, hcsr);
+}
+
/**
* mei_me_intr_clear - clear and stop interrupts
*
@@ -255,8 +285,7 @@ static void mei_me_intr_clear(struct mei_device *dev)
{
u32 hcsr = mei_hcsr_read(dev);
- if (hcsr & H_CSR_IS_MASK)
- mei_hcsr_write(dev, hcsr);
+ me_intr_clear(dev, hcsr);
}
/**
* mei_me_intr_enable - enables mei device interrupts
@@ -280,8 +309,19 @@ static void mei_me_intr_disable(struct mei_device *dev)
{
u32 hcsr = mei_hcsr_read(dev);
- hcsr &= ~H_CSR_IE_MASK;
- mei_hcsr_set(dev, hcsr);
+ me_intr_disable(dev, hcsr);
+}
+
+/**
+ * mei_me_synchronize_irq - wait for pending IRQ handlers
+ *
+ * @dev: the device structure
+ */
+static void mei_me_synchronize_irq(struct mei_device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev->dev);
+
+ synchronize_irq(pdev->irq);
}
/**
@@ -450,7 +490,7 @@ static size_t mei_me_hbuf_max_len(const struct mei_device *dev)
/**
- * mei_me_write_message - writes a message to mei device.
+ * mei_me_hbuf_write - writes a message to host hw buffer.
*
* @dev: the device structure
* @header: mei HECI header of message
@@ -458,9 +498,9 @@ static size_t mei_me_hbuf_max_len(const struct mei_device *dev)
*
* Return: -EIO if write has failed
*/
-static int mei_me_write_message(struct mei_device *dev,
- struct mei_msg_hdr *header,
- unsigned char *buf)
+static int mei_me_hbuf_write(struct mei_device *dev,
+ struct mei_msg_hdr *header,
+ const unsigned char *buf)
{
unsigned long rem;
unsigned long length = header->length;
@@ -956,13 +996,14 @@ static void mei_me_pg_legacy_intr(struct mei_device *dev)
* mei_me_d0i3_intr - perform d0i3 processing in interrupt thread handler
*
* @dev: the device structure
+ * @intr_source: interrupt source
*/
-static void mei_me_d0i3_intr(struct mei_device *dev)
+static void mei_me_d0i3_intr(struct mei_device *dev, u32 intr_source)
{
struct mei_me_hw *hw = to_me_hw(dev);
if (dev->pg_event == MEI_PG_EVENT_INTR_WAIT &&
- (hw->intr_source & H_D0I3C_IS)) {
+ (intr_source & H_D0I3C_IS)) {
dev->pg_event = MEI_PG_EVENT_INTR_RECEIVED;
if (hw->pg_state == MEI_PG_ON) {
hw->pg_state = MEI_PG_OFF;
@@ -981,7 +1022,7 @@ static void mei_me_d0i3_intr(struct mei_device *dev)
wake_up(&dev->wait_pg);
}
- if (hw->pg_state == MEI_PG_ON && (hw->intr_source & H_IS)) {
+ if (hw->pg_state == MEI_PG_ON && (intr_source & H_IS)) {
/*
* HW sent some data and we are in D0i3, so
* we got here because of HW initiated exit from D0i3.
@@ -996,13 +1037,14 @@ static void mei_me_d0i3_intr(struct mei_device *dev)
* mei_me_pg_intr - perform pg processing in interrupt thread handler
*
* @dev: the device structure
+ * @intr_source: interrupt source
*/
-static void mei_me_pg_intr(struct mei_device *dev)
+static void mei_me_pg_intr(struct mei_device *dev, u32 intr_source)
{
struct mei_me_hw *hw = to_me_hw(dev);
if (hw->d0i3_supported)
- mei_me_d0i3_intr(dev);
+ mei_me_d0i3_intr(dev, intr_source);
else
mei_me_pg_legacy_intr(dev);
}
@@ -1121,19 +1163,16 @@ static int mei_me_hw_reset(struct mei_device *dev, bool intr_enable)
irqreturn_t mei_me_irq_quick_handler(int irq, void *dev_id)
{
struct mei_device *dev = (struct mei_device *)dev_id;
- struct mei_me_hw *hw = to_me_hw(dev);
u32 hcsr;
hcsr = mei_hcsr_read(dev);
- if (!(hcsr & H_CSR_IS_MASK))
+ if (!me_intr_src(hcsr))
return IRQ_NONE;
- hw->intr_source = hcsr & H_CSR_IS_MASK;
- dev_dbg(dev->dev, "interrupt source 0x%08X.\n", hw->intr_source);
-
- /* clear H_IS and H_D0I3C_IS bits in H_CSR to clear the interrupts */
- mei_hcsr_write(dev, hcsr);
+ dev_dbg(dev->dev, "interrupt source 0x%08X\n", me_intr_src(hcsr));
+ /* disable interrupts on device */
+ me_intr_disable(dev, hcsr);
return IRQ_WAKE_THREAD;
}
@@ -1152,11 +1191,16 @@ irqreturn_t mei_me_irq_thread_handler(int irq, void *dev_id)
struct mei_device *dev = (struct mei_device *) dev_id;
struct mei_cl_cb complete_list;
s32 slots;
+ u32 hcsr;
int rets = 0;
dev_dbg(dev->dev, "function called after ISR to handle the interrupt processing.\n");
/* initialize our complete list */
mutex_lock(&dev->device_lock);
+
+ hcsr = mei_hcsr_read(dev);
+ me_intr_clear(dev, hcsr);
+
mei_io_list_init(&complete_list);
/* check if ME wants a reset */
@@ -1166,7 +1210,7 @@ irqreturn_t mei_me_irq_thread_handler(int irq, void *dev_id)
goto end;
}
- mei_me_pg_intr(dev);
+ mei_me_pg_intr(dev, me_intr_src(hcsr));
/* check if we need to start the dev */
if (!mei_host_is_ready(dev)) {
@@ -1216,6 +1260,7 @@ irqreturn_t mei_me_irq_thread_handler(int irq, void *dev_id)
end:
dev_dbg(dev->dev, "interrupt thread end ret = %d\n", rets);
+ mei_me_intr_enable(dev);
mutex_unlock(&dev->device_lock);
return IRQ_HANDLED;
}
@@ -1238,12 +1283,13 @@ static const struct mei_hw_ops mei_me_hw_ops = {
.intr_clear = mei_me_intr_clear,
.intr_enable = mei_me_intr_enable,
.intr_disable = mei_me_intr_disable,
+ .synchronize_irq = mei_me_synchronize_irq,
.hbuf_free_slots = mei_me_hbuf_empty_slots,
.hbuf_is_ready = mei_me_hbuf_is_empty,
.hbuf_max_len = mei_me_hbuf_max_len,
- .write = mei_me_write_message,
+ .write = mei_me_hbuf_write,
.rdbuf_full_slots = mei_me_count_full_read_slots,
.read_hdr = mei_me_mecbrw_read,
diff --git a/drivers/misc/mei/hw-me.h b/drivers/misc/mei/hw-me.h
index 2ee14dc1b2ea..cf64847a35b9 100644
--- a/drivers/misc/mei/hw-me.h
+++ b/drivers/misc/mei/hw-me.h
@@ -51,14 +51,12 @@ struct mei_cfg {
*
* @cfg: per device generation config and ops
* @mem_addr: io memory address
- * @intr_source: interrupt source
* @pg_state: power gating state
* @d0i3_supported: di03 support
*/
struct mei_me_hw {
const struct mei_cfg *cfg;
void __iomem *mem_addr;
- u32 intr_source;
enum mei_pg_state pg_state;
bool d0i3_supported;
};
diff --git a/drivers/misc/mei/hw-txe.c b/drivers/misc/mei/hw-txe.c
index 60415a2bfcbd..e9f8c0aeec13 100644
--- a/drivers/misc/mei/hw-txe.c
+++ b/drivers/misc/mei/hw-txe.c
@@ -19,7 +19,7 @@
#include <linux/ktime.h>
#include <linux/delay.h>
#include <linux/kthread.h>
-#include <linux/irqreturn.h>
+#include <linux/interrupt.h>
#include <linux/pm_runtime.h>
#include <linux/mei.h>
@@ -441,6 +441,18 @@ static void mei_txe_intr_enable(struct mei_device *dev)
}
/**
+ * mei_txe_synchronize_irq - wait for pending IRQ handlers
+ *
+ * @dev: the device structure
+ */
+static void mei_txe_synchronize_irq(struct mei_device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev->dev);
+
+ synchronize_irq(pdev->irq);
+}
+
+/**
* mei_txe_pending_interrupts - check if there are pending interrupts
* only Aliveness, Input ready, and output doorbell are of relevance
*
@@ -691,7 +703,8 @@ static void mei_txe_hw_config(struct mei_device *dev)
*/
static int mei_txe_write(struct mei_device *dev,
- struct mei_msg_hdr *header, unsigned char *buf)
+ struct mei_msg_hdr *header,
+ const unsigned char *buf)
{
struct mei_txe_hw *hw = to_txe_hw(dev);
unsigned long rem;
@@ -1167,6 +1180,7 @@ static const struct mei_hw_ops mei_txe_hw_ops = {
.intr_clear = mei_txe_intr_clear,
.intr_enable = mei_txe_intr_enable,
.intr_disable = mei_txe_intr_disable,
+ .synchronize_irq = mei_txe_synchronize_irq,
.hbuf_free_slots = mei_txe_hbuf_empty_slots,
.hbuf_is_ready = mei_txe_is_input_ready,
diff --git a/drivers/misc/mei/init.c b/drivers/misc/mei/init.c
index 9a9c2484d107..41e5760a6886 100644
--- a/drivers/misc/mei/init.c
+++ b/drivers/misc/mei/init.c
@@ -122,6 +122,10 @@ int mei_reset(struct mei_device *dev)
mei_dev_state_str(state), fw_sts_str);
}
+ mei_clear_interrupts(dev);
+
+ mei_synchronize_irq(dev);
+
/* we're already in reset, cancel the init timer
* if the reset was called due the hbm protocol error
* we need to call it before hw start
@@ -273,8 +277,6 @@ int mei_restart(struct mei_device *dev)
mutex_lock(&dev->device_lock);
- mei_clear_interrupts(dev);
-
dev->dev_state = MEI_DEV_POWER_UP;
dev->reset_count = 0;
diff --git a/drivers/misc/mei/interrupt.c b/drivers/misc/mei/interrupt.c
index 5a4893ce9c24..b584749bcc4a 100644
--- a/drivers/misc/mei/interrupt.c
+++ b/drivers/misc/mei/interrupt.c
@@ -118,7 +118,6 @@ int mei_cl_irq_read_msg(struct mei_cl *cl,
if (!mei_cl_is_connected(cl)) {
cl_dbg(dev, cl, "not connected\n");
- list_move_tail(&cb->list, &complete_list->list);
cb->status = -ENODEV;
goto discard;
}
@@ -128,8 +127,6 @@ int mei_cl_irq_read_msg(struct mei_cl *cl,
if (buf_sz < cb->buf_idx) {
cl_err(dev, cl, "message is too big len %d idx %zu\n",
mei_hdr->length, cb->buf_idx);
-
- list_move_tail(&cb->list, &complete_list->list);
cb->status = -EMSGSIZE;
goto discard;
}
@@ -137,8 +134,6 @@ int mei_cl_irq_read_msg(struct mei_cl *cl,
if (cb->buf.size < buf_sz) {
cl_dbg(dev, cl, "message overflow. size %zu len %d idx %zu\n",
cb->buf.size, mei_hdr->length, cb->buf_idx);
-
- list_move_tail(&cb->list, &complete_list->list);
cb->status = -EMSGSIZE;
goto discard;
}
@@ -158,6 +153,8 @@ int mei_cl_irq_read_msg(struct mei_cl *cl,
return 0;
discard:
+ if (cb)
+ list_move_tail(&cb->list, &complete_list->list);
mei_irq_discard_msg(dev, mei_hdr);
return 0;
}
diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c
index fa50635512e8..e1bf54481fd6 100644
--- a/drivers/misc/mei/main.c
+++ b/drivers/misc/mei/main.c
@@ -322,7 +322,7 @@ static ssize_t mei_write(struct file *file, const char __user *ubuf,
goto out;
}
- rets = mei_cl_write(cl, cb, false);
+ rets = mei_cl_write(cl, cb);
out:
mutex_unlock(&dev->device_lock);
return rets;
@@ -653,7 +653,7 @@ static int mei_fasync(int fd, struct file *file, int band)
}
/**
- * fw_status_show - mei device attribute show method
+ * fw_status_show - mei device fw_status attribute show method
*
* @device: device pointer
* @attr: attribute pointer
@@ -684,8 +684,49 @@ static ssize_t fw_status_show(struct device *device,
}
static DEVICE_ATTR_RO(fw_status);
+/**
+ * hbm_ver_show - display HBM protocol version negotiated with FW
+ *
+ * @device: device pointer
+ * @attr: attribute pointer
+ * @buf: char out buffer
+ *
+ * Return: number of the bytes printed into buf or error
+ */
+static ssize_t hbm_ver_show(struct device *device,
+ struct device_attribute *attr, char *buf)
+{
+ struct mei_device *dev = dev_get_drvdata(device);
+ struct hbm_version ver;
+
+ mutex_lock(&dev->device_lock);
+ ver = dev->version;
+ mutex_unlock(&dev->device_lock);
+
+ return sprintf(buf, "%u.%u\n", ver.major_version, ver.minor_version);
+}
+static DEVICE_ATTR_RO(hbm_ver);
+
+/**
+ * hbm_ver_drv_show - display HBM protocol version advertised by driver
+ *
+ * @device: device pointer
+ * @attr: attribute pointer
+ * @buf: char out buffer
+ *
+ * Return: number of the bytes printed into buf or error
+ */
+static ssize_t hbm_ver_drv_show(struct device *device,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%u.%u\n", HBM_MAJOR_VERSION, HBM_MINOR_VERSION);
+}
+static DEVICE_ATTR_RO(hbm_ver_drv);
+
static struct attribute *mei_attrs[] = {
&dev_attr_fw_status.attr,
+ &dev_attr_hbm_ver.attr,
+ &dev_attr_hbm_ver_drv.attr,
NULL
};
ATTRIBUTE_GROUPS(mei);
diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h
index 1169fd9e7d02..699693cd8c59 100644
--- a/drivers/misc/mei/mei_dev.h
+++ b/drivers/misc/mei/mei_dev.h
@@ -55,7 +55,8 @@ extern const uuid_le mei_amthif_guid;
/* File state */
enum file_state {
- MEI_FILE_INITIALIZING = 0,
+ MEI_FILE_UNINITIALIZED = 0,
+ MEI_FILE_INITIALIZING,
MEI_FILE_CONNECTING,
MEI_FILE_CONNECTED,
MEI_FILE_DISCONNECTING,
@@ -109,6 +110,21 @@ enum mei_cb_file_ops {
MEI_FOP_NOTIFY_STOP,
};
+/**
+ * enum mei_cl_io_mode - io mode between driver and fw
+ *
+ * @MEI_CL_IO_TX_BLOCKING: send is blocking
+ * @MEI_CL_IO_TX_INTERNAL: internal communication between driver and FW
+ *
+ * @MEI_CL_IO_RX_NONBLOCK: recv is non-blocking
+ */
+enum mei_cl_io_mode {
+ MEI_CL_IO_TX_BLOCKING = BIT(0),
+ MEI_CL_IO_TX_INTERNAL = BIT(1),
+
+ MEI_CL_IO_RX_NONBLOCK = BIT(2),
+};
+
/*
* Intel MEI message data struct
*/
@@ -169,6 +185,7 @@ struct mei_cl;
* @fp: pointer to file structure
* @status: io status of the cb
* @internal: communication between driver and FW flag
+ * @blocking: transmission blocking mode
* @completed: the transfer or reception has completed
*/
struct mei_cl_cb {
@@ -180,6 +197,7 @@ struct mei_cl_cb {
const struct file *fp;
int status;
u32 internal:1;
+ u32 blocking:1;
u32 completed:1;
};
@@ -253,6 +271,7 @@ struct mei_cl {
* @intr_clear : clear pending interrupts
* @intr_enable : enable interrupts
* @intr_disable : disable interrupts
+ * @synchronize_irq : synchronize irqs
*
* @hbuf_free_slots : query for write buffer empty slots
* @hbuf_is_ready : query if write buffer is empty
@@ -274,7 +293,6 @@ struct mei_hw_ops {
int (*hw_start)(struct mei_device *dev);
void (*hw_config)(struct mei_device *dev);
-
int (*fw_status)(struct mei_device *dev, struct mei_fw_status *fw_sts);
enum mei_pg_state (*pg_state)(struct mei_device *dev);
bool (*pg_in_transition)(struct mei_device *dev);
@@ -283,14 +301,14 @@ struct mei_hw_ops {
void (*intr_clear)(struct mei_device *dev);
void (*intr_enable)(struct mei_device *dev);
void (*intr_disable)(struct mei_device *dev);
+ void (*synchronize_irq)(struct mei_device *dev);
int (*hbuf_free_slots)(struct mei_device *dev);
bool (*hbuf_is_ready)(struct mei_device *dev);
size_t (*hbuf_max_len)(const struct mei_device *dev);
-
int (*write)(struct mei_device *dev,
struct mei_msg_hdr *hdr,
- unsigned char *buf);
+ const unsigned char *buf);
int (*rdbuf_full_slots)(struct mei_device *dev);
@@ -304,8 +322,9 @@ void mei_cl_bus_rescan(struct mei_device *bus);
void mei_cl_bus_rescan_work(struct work_struct *work);
void mei_cl_bus_dev_fixup(struct mei_cl_device *dev);
ssize_t __mei_cl_send(struct mei_cl *cl, u8 *buf, size_t length,
- bool blocking);
-ssize_t __mei_cl_recv(struct mei_cl *cl, u8 *buf, size_t length);
+ unsigned int mode);
+ssize_t __mei_cl_recv(struct mei_cl *cl, u8 *buf, size_t length,
+ unsigned int mode);
bool mei_cl_bus_rx_event(struct mei_cl *cl);
bool mei_cl_bus_notify_event(struct mei_cl *cl);
void mei_cl_bus_remove_devices(struct mei_device *bus);
@@ -627,6 +646,11 @@ static inline void mei_disable_interrupts(struct mei_device *dev)
dev->ops->intr_disable(dev);
}
+static inline void mei_synchronize_irq(struct mei_device *dev)
+{
+ dev->ops->synchronize_irq(dev);
+}
+
static inline bool mei_host_is_ready(struct mei_device *dev)
{
return dev->ops->host_is_ready(dev);
@@ -652,7 +676,7 @@ static inline size_t mei_hbuf_max_len(const struct mei_device *dev)
}
static inline int mei_write_message(struct mei_device *dev,
- struct mei_msg_hdr *hdr, void *buf)
+ struct mei_msg_hdr *hdr, const void *buf)
{
return dev->ops->write(dev, hdr, buf);
}
diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c
index f3ffd883b232..f9c6ec4b98ab 100644
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -87,6 +87,7 @@ static const struct pci_device_id mei_me_pci_tbl[] = {
{MEI_PCI_DEVICE(MEI_DEV_ID_SPT_2, mei_me_pch8_cfg)},
{MEI_PCI_DEVICE(MEI_DEV_ID_SPT_H, mei_me_pch8_sps_cfg)},
{MEI_PCI_DEVICE(MEI_DEV_ID_SPT_H_2, mei_me_pch8_sps_cfg)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_LBG, mei_me_pch8_cfg)},
{MEI_PCI_DEVICE(MEI_DEV_ID_BXT_M, mei_me_pch8_cfg)},
{MEI_PCI_DEVICE(MEI_DEV_ID_APL_I, mei_me_pch8_cfg)},
diff --git a/drivers/nfc/mei_phy.c b/drivers/nfc/mei_phy.c
index 6f9563a96488..8a04c5e02999 100644
--- a/drivers/nfc/mei_phy.c
+++ b/drivers/nfc/mei_phy.c
@@ -297,35 +297,34 @@ static int mei_nfc_recv(struct nfc_mei_phy *phy, u8 *buf, size_t length)
}
-static void nfc_mei_event_cb(struct mei_cl_device *cldev, u32 events,
- void *context)
+static void nfc_mei_rx_cb(struct mei_cl_device *cldev)
{
- struct nfc_mei_phy *phy = context;
+ struct nfc_mei_phy *phy = mei_cldev_get_drvdata(cldev);
+ struct sk_buff *skb;
+ int reply_size;
- if (phy->hard_fault != 0)
+ if (!phy)
return;
- if (events & BIT(MEI_CL_EVENT_RX)) {
- struct sk_buff *skb;
- int reply_size;
+ if (phy->hard_fault != 0)
+ return;
- skb = alloc_skb(MEI_NFC_MAX_READ, GFP_KERNEL);
- if (!skb)
- return;
+ skb = alloc_skb(MEI_NFC_MAX_READ, GFP_KERNEL);
+ if (!skb)
+ return;
- reply_size = mei_nfc_recv(phy, skb->data, MEI_NFC_MAX_READ);
- if (reply_size < MEI_NFC_HEADER_SIZE) {
- kfree_skb(skb);
- return;
- }
+ reply_size = mei_nfc_recv(phy, skb->data, MEI_NFC_MAX_READ);
+ if (reply_size < MEI_NFC_HEADER_SIZE) {
+ kfree_skb(skb);
+ return;
+ }
- skb_put(skb, reply_size);
- skb_pull(skb, MEI_NFC_HEADER_SIZE);
+ skb_put(skb, reply_size);
+ skb_pull(skb, MEI_NFC_HEADER_SIZE);
- MEI_DUMP_SKB_IN("mei frame read", skb);
+ MEI_DUMP_SKB_IN("mei frame read", skb);
- nfc_hci_recv_frame(phy->hdev, skb);
- }
+ nfc_hci_recv_frame(phy->hdev, skb);
}
static int nfc_mei_phy_enable(void *phy_id)
@@ -356,8 +355,7 @@ static int nfc_mei_phy_enable(void *phy_id)
goto err;
}
- r = mei_cldev_register_event_cb(phy->cldev, BIT(MEI_CL_EVENT_RX),
- nfc_mei_event_cb, phy);
+ r = mei_cldev_register_rx_cb(phy->cldev, nfc_mei_rx_cb);
if (r) {
pr_err("Event cb registration failed %d\n", r);
goto err;
diff --git a/drivers/nfc/microread/mei.c b/drivers/nfc/microread/mei.c
index 3092501f26c4..eb5eddf1794e 100644
--- a/drivers/nfc/microread/mei.c
+++ b/drivers/nfc/microread/mei.c
@@ -82,28 +82,7 @@ static struct mei_cl_driver microread_driver = {
.remove = microread_mei_remove,
};
-static int microread_mei_init(void)
-{
- int r;
-
- pr_debug(DRIVER_DESC ": %s\n", __func__);
-
- r = mei_cldev_driver_register(&microread_driver);
- if (r) {
- pr_err(MICROREAD_DRIVER_NAME ": driver registration failed\n");
- return r;
- }
-
- return 0;
-}
-
-static void microread_mei_exit(void)
-{
- mei_cldev_driver_unregister(&microread_driver);
-}
-
-module_init(microread_mei_init);
-module_exit(microread_mei_exit);
+module_mei_cl_driver(microread_driver);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/nfc/pn544/mei.c b/drivers/nfc/pn544/mei.c
index 46d0eb24eef9..ad57a8ec00d6 100644
--- a/drivers/nfc/pn544/mei.c
+++ b/drivers/nfc/pn544/mei.c
@@ -82,28 +82,7 @@ static struct mei_cl_driver pn544_driver = {
.remove = pn544_mei_remove,
};
-static int pn544_mei_init(void)
-{
- int r;
-
- pr_debug(DRIVER_DESC ": %s\n", __func__);
-
- r = mei_cldev_driver_register(&pn544_driver);
- if (r) {
- pr_err(PN544_DRIVER_NAME ": driver registration failed\n");
- return r;
- }
-
- return 0;
-}
-
-static void pn544_mei_exit(void)
-{
- mei_cldev_driver_unregister(&pn544_driver);
-}
-
-module_init(pn544_mei_init);
-module_exit(pn544_mei_exit);
+module_mei_cl_driver(pn544_driver);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index ba140eaee5c8..650f1b1797ad 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -35,6 +35,16 @@ config NVMEM_LPC18XX_EEPROM
To compile this driver as a module, choose M here: the module
will be called nvmem_lpc18xx_eeprom.
+config NVMEM_LPC18XX_OTP
+ tristate "NXP LPC18XX OTP Memory Support"
+ depends on ARCH_LPC18XX || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ Say Y here to include support for NXP LPC18xx OTP memory found on
+ all LPC18xx and LPC43xx devices.
+ To compile this driver as a module, choose M here: the module
+ will be called nvmem_lpc18xx_otp.
+
config NVMEM_MXS_OCOTP
tristate "Freescale MXS On-Chip OTP Memory Support"
depends on ARCH_MXS || COMPILE_TEST
@@ -80,6 +90,18 @@ config ROCKCHIP_EFUSE
This driver can also be built as a module. If so, the module
will be called nvmem_rockchip_efuse.
+config NVMEM_BCM_OCOTP
+ tristate "Broadcom On-Chip OTP Controller support"
+ depends on ARCH_BCM_IPROC || COMPILE_TEST
+ depends on HAS_IOMEM
+ default ARCH_BCM_IPROC
+ help
+ Say y here to enable read/write access to the Broadcom OTP
+ controller.
+
+ This driver can also be built as a module. If so, the module
+ will be called nvmem-bcm-ocotp.
+
config NVMEM_SUNXI_SID
tristate "Allwinner SoCs SID support"
depends on ARCH_SUNXI
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
index 8f942a0cdaec..86e45995fdad 100644
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -6,10 +6,14 @@ obj-$(CONFIG_NVMEM) += nvmem_core.o
nvmem_core-y := core.o
# Devices
+obj-$(CONFIG_NVMEM_BCM_OCOTP) += nvmem-bcm-ocotp.o
+nvmem-bcm-ocotp-y := bcm-ocotp.o
obj-$(CONFIG_NVMEM_IMX_OCOTP) += nvmem-imx-ocotp.o
nvmem-imx-ocotp-y := imx-ocotp.o
obj-$(CONFIG_NVMEM_LPC18XX_EEPROM) += nvmem_lpc18xx_eeprom.o
nvmem_lpc18xx_eeprom-y := lpc18xx_eeprom.o
+obj-$(CONFIG_NVMEM_LPC18XX_OTP) += nvmem_lpc18xx_otp.o
+nvmem_lpc18xx_otp-y := lpc18xx_otp.o
obj-$(CONFIG_NVMEM_MXS_OCOTP) += nvmem-mxs-ocotp.o
nvmem-mxs-ocotp-y := mxs-ocotp.o
obj-$(CONFIG_MTK_EFUSE) += nvmem_mtk-efuse.o
diff --git a/drivers/nvmem/bcm-ocotp.c b/drivers/nvmem/bcm-ocotp.c
new file mode 100644
index 000000000000..646cadbf1f93
--- /dev/null
+++ b/drivers/nvmem/bcm-ocotp.c
@@ -0,0 +1,335 @@
+/*
+ * Copyright (C) 2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+
+/*
+ * # of tries for OTP Status. The time to execute a command varies. The slowest
+ * commands are writes which also vary based on the # of bits turned on. Writing
+ * 0xffffffff takes ~3800 us.
+ */
+#define OTPC_RETRIES 5000
+
+/* Sequence to enable OTP program */
+#define OTPC_PROG_EN_SEQ { 0xf, 0x4, 0x8, 0xd }
+
+/* OTPC Commands */
+#define OTPC_CMD_READ 0x0
+#define OTPC_CMD_OTP_PROG_ENABLE 0x2
+#define OTPC_CMD_OTP_PROG_DISABLE 0x3
+#define OTPC_CMD_PROGRAM 0xA
+
+/* OTPC Status Bits */
+#define OTPC_STAT_CMD_DONE BIT(1)
+#define OTPC_STAT_PROG_OK BIT(2)
+
+/* OTPC register definition */
+#define OTPC_MODE_REG_OFFSET 0x0
+#define OTPC_MODE_REG_OTPC_MODE 0
+#define OTPC_COMMAND_OFFSET 0x4
+#define OTPC_COMMAND_COMMAND_WIDTH 6
+#define OTPC_CMD_START_OFFSET 0x8
+#define OTPC_CMD_START_START 0
+#define OTPC_CPU_STATUS_OFFSET 0xc
+#define OTPC_CPUADDR_REG_OFFSET 0x28
+#define OTPC_CPUADDR_REG_OTPC_CPU_ADDRESS_WIDTH 16
+#define OTPC_CPU_WRITE_REG_OFFSET 0x2c
+
+#define OTPC_CMD_MASK (BIT(OTPC_COMMAND_COMMAND_WIDTH) - 1)
+#define OTPC_ADDR_MASK (BIT(OTPC_CPUADDR_REG_OTPC_CPU_ADDRESS_WIDTH) - 1)
+
+
+struct otpc_map {
+ /* in words. */
+ u32 otpc_row_size;
+ /* 128 bit row / 4 words support. */
+ u16 data_r_offset[4];
+ /* 128 bit row / 4 words support. */
+ u16 data_w_offset[4];
+};
+
+static struct otpc_map otp_map = {
+ .otpc_row_size = 1,
+ .data_r_offset = {0x10},
+ .data_w_offset = {0x2c},
+};
+
+static struct otpc_map otp_map_v2 = {
+ .otpc_row_size = 2,
+ .data_r_offset = {0x10, 0x5c},
+ .data_w_offset = {0x2c, 0x64},
+};
+
+struct otpc_priv {
+ struct device *dev;
+ void __iomem *base;
+ struct otpc_map *map;
+ struct nvmem_config *config;
+};
+
+static inline void set_command(void __iomem *base, u32 command)
+{
+ writel(command & OTPC_CMD_MASK, base + OTPC_COMMAND_OFFSET);
+}
+
+static inline void set_cpu_address(void __iomem *base, u32 addr)
+{
+ writel(addr & OTPC_ADDR_MASK, base + OTPC_CPUADDR_REG_OFFSET);
+}
+
+static inline void set_start_bit(void __iomem *base)
+{
+ writel(1 << OTPC_CMD_START_START, base + OTPC_CMD_START_OFFSET);
+}
+
+static inline void reset_start_bit(void __iomem *base)
+{
+ writel(0, base + OTPC_CMD_START_OFFSET);
+}
+
+static inline void write_cpu_data(void __iomem *base, u32 value)
+{
+ writel(value, base + OTPC_CPU_WRITE_REG_OFFSET);
+}
+
+static int poll_cpu_status(void __iomem *base, u32 value)
+{
+ u32 status;
+ u32 retries;
+
+ for (retries = 0; retries < OTPC_RETRIES; retries++) {
+ status = readl(base + OTPC_CPU_STATUS_OFFSET);
+ if (status & value)
+ break;
+ udelay(1);
+ }
+ if (retries == OTPC_RETRIES)
+ return -EAGAIN;
+
+ return 0;
+}
+
+static int enable_ocotp_program(void __iomem *base)
+{
+ static const u32 vals[] = OTPC_PROG_EN_SEQ;
+ int i;
+ int ret;
+
+ /* Write the magic sequence to enable programming */
+ set_command(base, OTPC_CMD_OTP_PROG_ENABLE);
+ for (i = 0; i < ARRAY_SIZE(vals); i++) {
+ write_cpu_data(base, vals[i]);
+ set_start_bit(base);
+ ret = poll_cpu_status(base, OTPC_STAT_CMD_DONE);
+ reset_start_bit(base);
+ if (ret)
+ return ret;
+ }
+
+ return poll_cpu_status(base, OTPC_STAT_PROG_OK);
+}
+
+static int disable_ocotp_program(void __iomem *base)
+{
+ int ret;
+
+ set_command(base, OTPC_CMD_OTP_PROG_DISABLE);
+ set_start_bit(base);
+ ret = poll_cpu_status(base, OTPC_STAT_PROG_OK);
+ reset_start_bit(base);
+
+ return ret;
+}
+
+static int bcm_otpc_read(void *context, unsigned int offset, void *val,
+ size_t bytes)
+{
+ struct otpc_priv *priv = context;
+ u32 *buf = val;
+ u32 bytes_read;
+ u32 address = offset / priv->config->word_size;
+ int i, ret;
+
+ for (bytes_read = 0; bytes_read < bytes;) {
+ set_command(priv->base, OTPC_CMD_READ);
+ set_cpu_address(priv->base, address++);
+ set_start_bit(priv->base);
+ ret = poll_cpu_status(priv->base, OTPC_STAT_CMD_DONE);
+ if (ret) {
+ dev_err(priv->dev, "otp read error: 0x%x", ret);
+ return -EIO;
+ }
+
+ for (i = 0; i < priv->map->otpc_row_size; i++) {
+ *buf++ = readl(priv->base +
+ priv->map->data_r_offset[i]);
+ bytes_read += sizeof(*buf);
+ }
+
+ reset_start_bit(priv->base);
+ }
+
+ return 0;
+}
+
+static int bcm_otpc_write(void *context, unsigned int offset, void *val,
+ size_t bytes)
+{
+ struct otpc_priv *priv = context;
+ u32 *buf = val;
+ u32 bytes_written;
+ u32 address = offset / priv->config->word_size;
+ int i, ret;
+
+ if (offset % priv->config->word_size)
+ return -EINVAL;
+
+ ret = enable_ocotp_program(priv->base);
+ if (ret)
+ return -EIO;
+
+ for (bytes_written = 0; bytes_written < bytes;) {
+ set_command(priv->base, OTPC_CMD_PROGRAM);
+ set_cpu_address(priv->base, address++);
+ for (i = 0; i < priv->map->otpc_row_size; i++) {
+ writel(*buf, priv->base + priv->map->data_r_offset[i]);
+ buf++;
+ bytes_written += sizeof(*buf);
+ }
+ set_start_bit(priv->base);
+ ret = poll_cpu_status(priv->base, OTPC_STAT_CMD_DONE);
+ reset_start_bit(priv->base);
+ if (ret) {
+ dev_err(priv->dev, "otp write error: 0x%x", ret);
+ return -EIO;
+ }
+ }
+
+ disable_ocotp_program(priv->base);
+
+ return 0;
+}
+
+static struct nvmem_config bcm_otpc_nvmem_config = {
+ .name = "bcm-ocotp",
+ .read_only = false,
+ .word_size = 4,
+ .stride = 4,
+ .owner = THIS_MODULE,
+ .reg_read = bcm_otpc_read,
+ .reg_write = bcm_otpc_write,
+};
+
+static const struct of_device_id bcm_otpc_dt_ids[] = {
+ { .compatible = "brcm,ocotp" },
+ { .compatible = "brcm,ocotp-v2" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, bcm_otpc_dt_ids);
+
+static int bcm_otpc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *dn = dev->of_node;
+ struct resource *res;
+ struct otpc_priv *priv;
+ struct nvmem_device *nvmem;
+ int err;
+ u32 num_words;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ if (of_device_is_compatible(dev->of_node, "brcm,ocotp"))
+ priv->map = &otp_map;
+ else if (of_device_is_compatible(dev->of_node, "brcm,ocotp-v2"))
+ priv->map = &otp_map_v2;
+ else {
+ dev_err(&pdev->dev,
+ "%s otpc config map not defined\n", __func__);
+ return -EINVAL;
+ }
+
+ /* Get OTP base address register. */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->base)) {
+ dev_err(dev, "unable to map I/O memory\n");
+ return PTR_ERR(priv->base);
+ }
+
+ /* Enable CPU access to OTPC. */
+ writel(readl(priv->base + OTPC_MODE_REG_OFFSET) |
+ BIT(OTPC_MODE_REG_OTPC_MODE),
+ priv->base + OTPC_MODE_REG_OFFSET);
+ reset_start_bit(priv->base);
+
+ /* Read size of memory in words. */
+ err = of_property_read_u32(dn, "brcm,ocotp-size", &num_words);
+ if (err) {
+ dev_err(dev, "size parameter not specified\n");
+ return -EINVAL;
+ } else if (num_words == 0) {
+ dev_err(dev, "size must be > 0\n");
+ return -EINVAL;
+ }
+
+ bcm_otpc_nvmem_config.size = 4 * num_words;
+ bcm_otpc_nvmem_config.dev = dev;
+ bcm_otpc_nvmem_config.priv = priv;
+
+ if (of_device_is_compatible(dev->of_node, "brcm,ocotp-v2")) {
+ bcm_otpc_nvmem_config.word_size = 8;
+ bcm_otpc_nvmem_config.stride = 8;
+ }
+
+ priv->config = &bcm_otpc_nvmem_config;
+
+ nvmem = nvmem_register(&bcm_otpc_nvmem_config);
+ if (IS_ERR(nvmem)) {
+ dev_err(dev, "error registering nvmem config\n");
+ return PTR_ERR(nvmem);
+ }
+
+ platform_set_drvdata(pdev, nvmem);
+
+ return 0;
+}
+
+static int bcm_otpc_remove(struct platform_device *pdev)
+{
+ struct nvmem_device *nvmem = platform_get_drvdata(pdev);
+
+ return nvmem_unregister(nvmem);
+}
+
+static struct platform_driver bcm_otpc_driver = {
+ .probe = bcm_otpc_probe,
+ .remove = bcm_otpc_remove,
+ .driver = {
+ .name = "brcm-otpc",
+ .of_match_table = bcm_otpc_dt_ids,
+ },
+};
+module_platform_driver(bcm_otpc_driver);
+
+MODULE_DESCRIPTION("Broadcom OTPC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/lpc18xx_otp.c b/drivers/nvmem/lpc18xx_otp.c
new file mode 100644
index 000000000000..be8d07403ffc
--- /dev/null
+++ b/drivers/nvmem/lpc18xx_otp.c
@@ -0,0 +1,124 @@
+/*
+ * NXP LPC18xx/43xx OTP memory NVMEM driver
+ *
+ * Copyright (c) 2016 Joachim Eastwood <manabian@gmail.com>
+ *
+ * Based on the imx ocotp driver,
+ * Copyright (c) 2015 Pengutronix, Philipp Zabel <p.zabel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * TODO: add support for writing OTP register via API in boot ROM.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/*
+ * LPC18xx OTP memory contains 4 banks with 4 32-bit words. Bank 0 starts
+ * at offset 0 from the base.
+ *
+ * Bank 0 contains the part ID for Flashless devices and is reseverd for
+ * devices with Flash.
+ * Bank 1/2 is generale purpose or AES key storage for secure devices.
+ * Bank 3 contains control data, USB ID and generale purpose words.
+ */
+#define LPC18XX_OTP_NUM_BANKS 4
+#define LPC18XX_OTP_WORDS_PER_BANK 4
+#define LPC18XX_OTP_WORD_SIZE sizeof(u32)
+#define LPC18XX_OTP_SIZE (LPC18XX_OTP_NUM_BANKS * \
+ LPC18XX_OTP_WORDS_PER_BANK * \
+ LPC18XX_OTP_WORD_SIZE)
+
+struct lpc18xx_otp {
+ void __iomem *base;
+};
+
+static int lpc18xx_otp_read(void *context, unsigned int offset,
+ void *val, size_t bytes)
+{
+ struct lpc18xx_otp *otp = context;
+ unsigned int count = bytes >> 2;
+ u32 index = offset >> 2;
+ u32 *buf = val;
+ int i;
+
+ if (count > (LPC18XX_OTP_SIZE - index))
+ count = LPC18XX_OTP_SIZE - index;
+
+ for (i = index; i < (index + count); i++)
+ *buf++ = readl(otp->base + i * LPC18XX_OTP_WORD_SIZE);
+
+ return 0;
+}
+
+static struct nvmem_config lpc18xx_otp_nvmem_config = {
+ .name = "lpc18xx-otp",
+ .read_only = true,
+ .word_size = LPC18XX_OTP_WORD_SIZE,
+ .stride = LPC18XX_OTP_WORD_SIZE,
+ .owner = THIS_MODULE,
+ .reg_read = lpc18xx_otp_read,
+};
+
+static int lpc18xx_otp_probe(struct platform_device *pdev)
+{
+ struct nvmem_device *nvmem;
+ struct lpc18xx_otp *otp;
+ struct resource *res;
+
+ otp = devm_kzalloc(&pdev->dev, sizeof(*otp), GFP_KERNEL);
+ if (!otp)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ otp->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(otp->base))
+ return PTR_ERR(otp->base);
+
+ lpc18xx_otp_nvmem_config.size = LPC18XX_OTP_SIZE;
+ lpc18xx_otp_nvmem_config.dev = &pdev->dev;
+ lpc18xx_otp_nvmem_config.priv = otp;
+
+ nvmem = nvmem_register(&lpc18xx_otp_nvmem_config);
+ if (IS_ERR(nvmem))
+ return PTR_ERR(nvmem);
+
+ platform_set_drvdata(pdev, nvmem);
+
+ return 0;
+}
+
+static int lpc18xx_otp_remove(struct platform_device *pdev)
+{
+ struct nvmem_device *nvmem = platform_get_drvdata(pdev);
+
+ return nvmem_unregister(nvmem);
+}
+
+static const struct of_device_id lpc18xx_otp_dt_ids[] = {
+ { .compatible = "nxp,lpc1850-otp" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, lpc18xx_otp_dt_ids);
+
+static struct platform_driver lpc18xx_otp_driver = {
+ .probe = lpc18xx_otp_probe,
+ .remove = lpc18xx_otp_remove,
+ .driver = {
+ .name = "lpc18xx_otp",
+ .of_match_table = lpc18xx_otp_dt_ids,
+ },
+};
+module_platform_driver(lpc18xx_otp_driver);
+
+MODULE_AUTHOR("Joachim Eastwoood <manabian@gmail.com>");
+MODULE_DESCRIPTION("NXP LPC18xx OTP NVMEM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c
index 318dbb51e7a2..0d4cda7050e0 100644
--- a/drivers/of/overlay.c
+++ b/drivers/of/overlay.c
@@ -58,6 +58,41 @@ struct of_overlay {
static int of_overlay_apply_one(struct of_overlay *ov,
struct device_node *target, const struct device_node *overlay);
+static BLOCKING_NOTIFIER_HEAD(of_overlay_chain);
+
+int of_overlay_notifier_register(struct notifier_block *nb)
+{
+ return blocking_notifier_chain_register(&of_overlay_chain, nb);
+}
+EXPORT_SYMBOL_GPL(of_overlay_notifier_register);
+
+int of_overlay_notifier_unregister(struct notifier_block *nb)
+{
+ return blocking_notifier_chain_unregister(&of_overlay_chain, nb);
+}
+EXPORT_SYMBOL_GPL(of_overlay_notifier_unregister);
+
+static int of_overlay_notify(struct of_overlay *ov,
+ enum of_overlay_notify_action action)
+{
+ struct of_overlay_notify_data nd;
+ int i, ret;
+
+ for (i = 0; i < ov->count; i++) {
+ struct of_overlay_info *ovinfo = &ov->ovinfo_tab[i];
+
+ nd.target = ovinfo->target;
+ nd.overlay = ovinfo->overlay;
+
+ ret = blocking_notifier_call_chain(&of_overlay_chain,
+ action, &nd);
+ if (ret)
+ return notifier_to_errno(ret);
+ }
+
+ return 0;
+}
+
static int of_overlay_apply_single_property(struct of_overlay *ov,
struct device_node *target, struct property *prop)
{
@@ -368,6 +403,13 @@ int of_overlay_create(struct device_node *tree)
goto err_free_idr;
}
+ err = of_overlay_notify(ov, OF_OVERLAY_PRE_APPLY);
+ if (err < 0) {
+ pr_err("%s: Pre-apply notifier failed (err=%d)\n",
+ __func__, err);
+ goto err_free_idr;
+ }
+
/* apply the overlay */
err = of_overlay_apply(ov);
if (err)
@@ -382,6 +424,8 @@ int of_overlay_create(struct device_node *tree)
/* add to the tail of the overlay list */
list_add_tail(&ov->node, &ov_list);
+ of_overlay_notify(ov, OF_OVERLAY_POST_APPLY);
+
mutex_unlock(&of_mutex);
return id;
@@ -498,9 +542,10 @@ int of_overlay_destroy(int id)
goto out;
}
-
+ of_overlay_notify(ov, OF_OVERLAY_PRE_REMOVE);
list_del(&ov->node);
__of_changeset_revert(&ov->cset);
+ of_overlay_notify(ov, OF_OVERLAY_POST_REMOVE);
of_free_overlay_info(ov);
idr_remove(&ov_idr, id);
of_changeset_destroy(&ov->cset);
diff --git a/drivers/platform/goldfish/goldfish_pipe.c b/drivers/platform/goldfish/goldfish_pipe.c
index 1aba2c74160e..2b21033f11f0 100644
--- a/drivers/platform/goldfish/goldfish_pipe.c
+++ b/drivers/platform/goldfish/goldfish_pipe.c
@@ -308,10 +308,8 @@ static ssize_t goldfish_pipe_read_write(struct file *filp, char __user *buffer,
* returns a small amount, then there's no need to pin that
* much memory to the process.
*/
- down_read(&current->mm->mmap_sem);
- ret = get_user_pages(address, 1, is_write ? 0 : FOLL_WRITE,
- &page, NULL);
- up_read(&current->mm->mmap_sem);
+ ret = get_user_pages_unlocked(address, 1, &page,
+ is_write ? 0 : FOLL_WRITE);
if (ret < 0)
break;
diff --git a/drivers/s390/char/sclp_ctl.c b/drivers/s390/char/sclp_ctl.c
index 554eaa1e347d..78a7e4f94721 100644
--- a/drivers/s390/char/sclp_ctl.c
+++ b/drivers/s390/char/sclp_ctl.c
@@ -10,7 +10,7 @@
#include <linux/uaccess.h>
#include <linux/miscdevice.h>
#include <linux/gfp.h>
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/ioctl.h>
#include <linux/fs.h>
#include <asm/compat.h>
@@ -126,4 +126,4 @@ static struct miscdevice sclp_ctl_device = {
.name = "sclp",
.fops = &sclp_ctl_fops,
};
-module_misc_device(sclp_ctl_device);
+builtin_misc_device(sclp_ctl_device);
diff --git a/drivers/thunderbolt/nhi_regs.h b/drivers/thunderbolt/nhi_regs.h
index 86b996c702a0..75cf0691e6c5 100644
--- a/drivers/thunderbolt/nhi_regs.h
+++ b/drivers/thunderbolt/nhi_regs.h
@@ -1,11 +1,11 @@
/*
- * Thunderbolt Cactus Ridge driver - NHI registers
+ * Thunderbolt driver - NHI registers
*
* Copyright (c) 2014 Andreas Noever <andreas.noever@gmail.com>
*/
-#ifndef DSL3510_REGS_H_
-#define DSL3510_REGS_H_
+#ifndef NHI_REGS_H_
+#define NHI_REGS_H_
#include <linux/types.h>
diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
index 52c98ce1b6fe..7e8dc78a9796 100644
--- a/drivers/uio/Kconfig
+++ b/drivers/uio/Kconfig
@@ -155,4 +155,13 @@ config UIO_MF624
If you compile this as a module, it will be called uio_mf624.
+config UIO_HV_GENERIC
+ tristate "Generic driver for Hyper-V VMBus"
+ depends on HYPERV
+ help
+ Generic driver that you can bind, dynamically, to any
+ Hyper-V VMBus device. It is useful to provide direct access
+ to network and storage devices from userspace.
+
+ If you compile this as a module, it will be called uio_hv_generic.
endif
diff --git a/drivers/uio/Makefile b/drivers/uio/Makefile
index 8560dad52d0f..e9663bb8a4c7 100644
--- a/drivers/uio/Makefile
+++ b/drivers/uio/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_UIO_NETX) += uio_netx.o
obj-$(CONFIG_UIO_PRUSS) += uio_pruss.o
obj-$(CONFIG_UIO_MF624) += uio_mf624.o
obj-$(CONFIG_UIO_FSL_ELBC_GPCM) += uio_fsl_elbc_gpcm.o
+obj-$(CONFIG_UIO_HV_GENERIC) += uio_hv_generic.o
diff --git a/drivers/uio/uio_hv_generic.c b/drivers/uio/uio_hv_generic.c
new file mode 100644
index 000000000000..50958f167305
--- /dev/null
+++ b/drivers/uio/uio_hv_generic.c
@@ -0,0 +1,218 @@
+/*
+ * uio_hv_generic - generic UIO driver for VMBus
+ *
+ * Copyright (c) 2013-2016 Brocade Communications Systems, Inc.
+ * Copyright (c) 2016, Microsoft Corporation.
+ *
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.
+ *
+ * Since the driver does not declare any device ids, you must allocate
+ * id and bind the device to the driver yourself. For example:
+ *
+ * # echo "f8615163-df3e-46c5-913f-f2d2f965ed0e" \
+ * > /sys/bus/vmbus/drivers/uio_hv_generic
+ * # echo -n vmbus-ed963694-e847-4b2a-85af-bc9cfc11d6f3 \
+ * > /sys/bus/vmbus/drivers/hv_netvsc/unbind
+ * # echo -n vmbus-ed963694-e847-4b2a-85af-bc9cfc11d6f3 \
+ * > /sys/bus/vmbus/drivers/uio_hv_generic/bind
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/uio_driver.h>
+#include <linux/netdevice.h>
+#include <linux/if_ether.h>
+#include <linux/skbuff.h>
+#include <linux/hyperv.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+
+#include "../hv/hyperv_vmbus.h"
+
+#define DRIVER_VERSION "0.02.0"
+#define DRIVER_AUTHOR "Stephen Hemminger <sthemmin at microsoft.com>"
+#define DRIVER_DESC "Generic UIO driver for VMBus devices"
+
+/*
+ * List of resources to be mapped to user space
+ * can be extended up to MAX_UIO_MAPS(5) items
+ */
+enum hv_uio_map {
+ TXRX_RING_MAP = 0,
+ INT_PAGE_MAP,
+ MON_PAGE_MAP,
+};
+
+#define HV_RING_SIZE 512
+
+struct hv_uio_private_data {
+ struct uio_info info;
+ struct hv_device *device;
+};
+
+static int
+hv_uio_mmap(struct uio_info *info, struct vm_area_struct *vma)
+{
+ int mi;
+
+ if (vma->vm_pgoff >= MAX_UIO_MAPS)
+ return -EINVAL;
+
+ if (info->mem[vma->vm_pgoff].size == 0)
+ return -EINVAL;
+
+ mi = (int)vma->vm_pgoff;
+
+ return remap_pfn_range(vma, vma->vm_start,
+ info->mem[mi].addr >> PAGE_SHIFT,
+ vma->vm_end - vma->vm_start, vma->vm_page_prot);
+}
+
+/*
+ * This is the irqcontrol callback to be registered to uio_info.
+ * It can be used to disable/enable interrupt from user space processes.
+ *
+ * @param info
+ * pointer to uio_info.
+ * @param irq_state
+ * state value. 1 to enable interrupt, 0 to disable interrupt.
+ */
+static int
+hv_uio_irqcontrol(struct uio_info *info, s32 irq_state)
+{
+ struct hv_uio_private_data *pdata = info->priv;
+ struct hv_device *dev = pdata->device;
+
+ dev->channel->inbound.ring_buffer->interrupt_mask = !irq_state;
+ virt_mb();
+
+ return 0;
+}
+
+/*
+ * Callback from vmbus_event when something is in inbound ring.
+ */
+static void hv_uio_channel_cb(void *context)
+{
+ struct hv_uio_private_data *pdata = context;
+ struct hv_device *dev = pdata->device;
+
+ dev->channel->inbound.ring_buffer->interrupt_mask = 1;
+ virt_mb();
+
+ uio_event_notify(&pdata->info);
+}
+
+static int
+hv_uio_probe(struct hv_device *dev,
+ const struct hv_vmbus_device_id *dev_id)
+{
+ struct hv_uio_private_data *pdata;
+ int ret;
+
+ pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ ret = vmbus_open(dev->channel, HV_RING_SIZE * PAGE_SIZE,
+ HV_RING_SIZE * PAGE_SIZE, NULL, 0,
+ hv_uio_channel_cb, pdata);
+ if (ret)
+ goto fail;
+
+ dev->channel->inbound.ring_buffer->interrupt_mask = 1;
+ dev->channel->batched_reading = false;
+
+ /* Fill general uio info */
+ pdata->info.name = "uio_hv_generic";
+ pdata->info.version = DRIVER_VERSION;
+ pdata->info.irqcontrol = hv_uio_irqcontrol;
+ pdata->info.mmap = hv_uio_mmap;
+ pdata->info.irq = UIO_IRQ_CUSTOM;
+
+ /* mem resources */
+ pdata->info.mem[TXRX_RING_MAP].name = "txrx_rings";
+ pdata->info.mem[TXRX_RING_MAP].addr
+ = virt_to_phys(dev->channel->ringbuffer_pages);
+ pdata->info.mem[TXRX_RING_MAP].size
+ = dev->channel->ringbuffer_pagecount * PAGE_SIZE;
+ pdata->info.mem[TXRX_RING_MAP].memtype = UIO_MEM_LOGICAL;
+
+ pdata->info.mem[INT_PAGE_MAP].name = "int_page";
+ pdata->info.mem[INT_PAGE_MAP].addr =
+ virt_to_phys(vmbus_connection.int_page);
+ pdata->info.mem[INT_PAGE_MAP].size = PAGE_SIZE;
+ pdata->info.mem[INT_PAGE_MAP].memtype = UIO_MEM_LOGICAL;
+
+ pdata->info.mem[MON_PAGE_MAP].name = "monitor_pages";
+ pdata->info.mem[MON_PAGE_MAP].addr =
+ virt_to_phys(vmbus_connection.monitor_pages[1]);
+ pdata->info.mem[MON_PAGE_MAP].size = PAGE_SIZE;
+ pdata->info.mem[MON_PAGE_MAP].memtype = UIO_MEM_LOGICAL;
+
+ pdata->info.priv = pdata;
+ pdata->device = dev;
+
+ ret = uio_register_device(&dev->device, &pdata->info);
+ if (ret) {
+ dev_err(&dev->device, "hv_uio register failed\n");
+ goto fail_close;
+ }
+
+ hv_set_drvdata(dev, pdata);
+
+ return 0;
+
+fail_close:
+ vmbus_close(dev->channel);
+fail:
+ kfree(pdata);
+
+ return ret;
+}
+
+static int
+hv_uio_remove(struct hv_device *dev)
+{
+ struct hv_uio_private_data *pdata = hv_get_drvdata(dev);
+
+ if (!pdata)
+ return 0;
+
+ uio_unregister_device(&pdata->info);
+ hv_set_drvdata(dev, NULL);
+ vmbus_close(dev->channel);
+ kfree(pdata);
+ return 0;
+}
+
+static struct hv_driver hv_uio_drv = {
+ .name = "uio_hv_generic",
+ .id_table = NULL, /* only dynamic id's */
+ .probe = hv_uio_probe,
+ .remove = hv_uio_remove,
+};
+
+static int __init
+hyperv_module_init(void)
+{
+ return vmbus_driver_register(&hv_uio_drv);
+}
+
+static void __exit
+hyperv_module_exit(void)
+{
+ vmbus_driver_unregister(&hv_uio_drv);
+}
+
+module_init(hyperv_module_init);
+module_exit(hyperv_module_exit);
+
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/uio/uio_pruss.c b/drivers/uio/uio_pruss.c
index ca9e2fafb0b6..31d5b1d3b5af 100644
--- a/drivers/uio/uio_pruss.c
+++ b/drivers/uio/uio_pruss.c
@@ -111,6 +111,7 @@ static void pruss_cleanup(struct device *dev, struct uio_pruss_dev *gdev)
gdev->sram_vaddr,
sram_pool_sz);
kfree(gdev->info);
+ clk_disable(gdev->pruss_clk);
clk_put(gdev->pruss_clk);
kfree(gdev);
}
@@ -143,7 +144,14 @@ static int pruss_probe(struct platform_device *pdev)
kfree(gdev);
return ret;
} else {
- clk_enable(gdev->pruss_clk);
+ ret = clk_enable(gdev->pruss_clk);
+ if (ret) {
+ dev_err(dev, "Failed to enable clock\n");
+ clk_put(gdev->pruss_clk);
+ kfree(gdev->info);
+ kfree(gdev);
+ return ret;
+ }
}
regs_prussio = platform_get_resource(pdev, IORESOURCE_MEM, 0);
diff --git a/drivers/watchdog/mei_wdt.c b/drivers/watchdog/mei_wdt.c
index 630bd189f167..79b35515904e 100644
--- a/drivers/watchdog/mei_wdt.c
+++ b/drivers/watchdog/mei_wdt.c
@@ -410,11 +410,11 @@ static void mei_wdt_unregister_work(struct work_struct *work)
}
/**
- * mei_wdt_event_rx - callback for data receive
+ * mei_wdt_rx - callback for data receive
*
* @cldev: bus device
*/
-static void mei_wdt_event_rx(struct mei_cl_device *cldev)
+static void mei_wdt_rx(struct mei_cl_device *cldev)
{
struct mei_wdt *wdt = mei_cldev_get_drvdata(cldev);
struct mei_wdt_start_response res;
@@ -482,11 +482,11 @@ out:
}
/*
- * mei_wdt_notify_event - callback for event notification
+ * mei_wdt_notif - callback for event notification
*
* @cldev: bus device
*/
-static void mei_wdt_notify_event(struct mei_cl_device *cldev)
+static void mei_wdt_notif(struct mei_cl_device *cldev)
{
struct mei_wdt *wdt = mei_cldev_get_drvdata(cldev);
@@ -496,23 +496,6 @@ static void mei_wdt_notify_event(struct mei_cl_device *cldev)
mei_wdt_register(wdt);
}
-/**
- * mei_wdt_event - callback for event receive
- *
- * @cldev: bus device
- * @events: event mask
- * @context: callback context
- */
-static void mei_wdt_event(struct mei_cl_device *cldev,
- u32 events, void *context)
-{
- if (events & BIT(MEI_CL_EVENT_RX))
- mei_wdt_event_rx(cldev);
-
- if (events & BIT(MEI_CL_EVENT_NOTIF))
- mei_wdt_notify_event(cldev);
-}
-
#if IS_ENABLED(CONFIG_DEBUG_FS)
static ssize_t mei_dbgfs_read_activation(struct file *file, char __user *ubuf,
@@ -623,16 +606,17 @@ static int mei_wdt_probe(struct mei_cl_device *cldev,
goto err_out;
}
- ret = mei_cldev_register_event_cb(wdt->cldev,
- BIT(MEI_CL_EVENT_RX) |
- BIT(MEI_CL_EVENT_NOTIF),
- mei_wdt_event, NULL);
+ ret = mei_cldev_register_rx_cb(wdt->cldev, mei_wdt_rx);
+ if (ret) {
+ dev_err(&cldev->dev, "Could not reg rx event ret=%d\n", ret);
+ goto err_disable;
+ }
+ ret = mei_cldev_register_notif_cb(wdt->cldev, mei_wdt_notif);
/* on legacy devices notification is not supported
- * this doesn't fail the registration for RX event
*/
if (ret && ret != -EOPNOTSUPP) {
- dev_err(&cldev->dev, "Could not register event ret=%d\n", ret);
+ dev_err(&cldev->dev, "Could not reg notif event ret=%d\n", ret);
goto err_disable;
}
@@ -699,25 +683,7 @@ static struct mei_cl_driver mei_wdt_driver = {
.remove = mei_wdt_remove,
};
-static int __init mei_wdt_init(void)
-{
- int ret;
-
- ret = mei_cldev_driver_register(&mei_wdt_driver);
- if (ret) {
- pr_err(KBUILD_MODNAME ": module registration failed\n");
- return ret;
- }
- return 0;
-}
-
-static void __exit mei_wdt_exit(void)
-{
- mei_cldev_driver_unregister(&mei_wdt_driver);
-}
-
-module_init(mei_wdt_init);
-module_exit(mei_wdt_exit);
+module_mei_cl_driver(mei_wdt_driver);
MODULE_AUTHOR("Intel Corporation");
MODULE_LICENSE("GPL");
diff --git a/include/linux/fpga/fpga-bridge.h b/include/linux/fpga/fpga-bridge.h
new file mode 100644
index 000000000000..dba6e3c697c7
--- /dev/null
+++ b/include/linux/fpga/fpga-bridge.h
@@ -0,0 +1,60 @@
+#include <linux/device.h>
+#include <linux/fpga/fpga-mgr.h>
+
+#ifndef _LINUX_FPGA_BRIDGE_H
+#define _LINUX_FPGA_BRIDGE_H
+
+struct fpga_bridge;
+
+/**
+ * struct fpga_bridge_ops - ops for low level FPGA bridge drivers
+ * @enable_show: returns the FPGA bridge's status
+ * @enable_set: set a FPGA bridge as enabled or disabled
+ * @fpga_bridge_remove: set FPGA into a specific state during driver remove
+ */
+struct fpga_bridge_ops {
+ int (*enable_show)(struct fpga_bridge *bridge);
+ int (*enable_set)(struct fpga_bridge *bridge, bool enable);
+ void (*fpga_bridge_remove)(struct fpga_bridge *bridge);
+};
+
+/**
+ * struct fpga_bridge - FPGA bridge structure
+ * @name: name of low level FPGA bridge
+ * @dev: FPGA bridge device
+ * @mutex: enforces exclusive reference to bridge
+ * @br_ops: pointer to struct of FPGA bridge ops
+ * @info: fpga image specific information
+ * @node: FPGA bridge list node
+ * @priv: low level driver private date
+ */
+struct fpga_bridge {
+ const char *name;
+ struct device dev;
+ struct mutex mutex; /* for exclusive reference to bridge */
+ const struct fpga_bridge_ops *br_ops;
+ struct fpga_image_info *info;
+ struct list_head node;
+ void *priv;
+};
+
+#define to_fpga_bridge(d) container_of(d, struct fpga_bridge, dev)
+
+struct fpga_bridge *of_fpga_bridge_get(struct device_node *node,
+ struct fpga_image_info *info);
+void fpga_bridge_put(struct fpga_bridge *bridge);
+int fpga_bridge_enable(struct fpga_bridge *bridge);
+int fpga_bridge_disable(struct fpga_bridge *bridge);
+
+int fpga_bridges_enable(struct list_head *bridge_list);
+int fpga_bridges_disable(struct list_head *bridge_list);
+void fpga_bridges_put(struct list_head *bridge_list);
+int fpga_bridge_get_to_list(struct device_node *np,
+ struct fpga_image_info *info,
+ struct list_head *bridge_list);
+
+int fpga_bridge_register(struct device *dev, const char *name,
+ const struct fpga_bridge_ops *br_ops, void *priv);
+void fpga_bridge_unregister(struct device *dev);
+
+#endif /* _LINUX_FPGA_BRIDGE_H */
diff --git a/include/linux/fpga/fpga-mgr.h b/include/linux/fpga/fpga-mgr.h
index 0940bf45e2f2..16551d5eac36 100644
--- a/include/linux/fpga/fpga-mgr.h
+++ b/include/linux/fpga/fpga-mgr.h
@@ -65,11 +65,26 @@ enum fpga_mgr_states {
/*
* FPGA Manager flags
* FPGA_MGR_PARTIAL_RECONFIG: do partial reconfiguration if supported
+ * FPGA_MGR_EXTERNAL_CONFIG: FPGA has been configured prior to Linux booting
*/
#define FPGA_MGR_PARTIAL_RECONFIG BIT(0)
+#define FPGA_MGR_EXTERNAL_CONFIG BIT(1)
+
+/**
+ * struct fpga_image_info - information specific to a FPGA image
+ * @flags: boolean flags as defined above
+ * @enable_timeout_us: maximum time to enable traffic through bridge (uSec)
+ * @disable_timeout_us: maximum time to disable traffic through bridge (uSec)
+ */
+struct fpga_image_info {
+ u32 flags;
+ u32 enable_timeout_us;
+ u32 disable_timeout_us;
+};
/**
* struct fpga_manager_ops - ops for low level fpga manager drivers
+ * @initial_header_size: Maximum number of bytes that should be passed into write_init
* @state: returns an enum value of the FPGA's state
* @write_init: prepare the FPGA to receive confuration data
* @write: write count bytes of configuration data to the FPGA
@@ -81,11 +96,14 @@ enum fpga_mgr_states {
* called, so leaving them out is fine.
*/
struct fpga_manager_ops {
+ size_t initial_header_size;
enum fpga_mgr_states (*state)(struct fpga_manager *mgr);
- int (*write_init)(struct fpga_manager *mgr, u32 flags,
+ int (*write_init)(struct fpga_manager *mgr,
+ struct fpga_image_info *info,
const char *buf, size_t count);
int (*write)(struct fpga_manager *mgr, const char *buf, size_t count);
- int (*write_complete)(struct fpga_manager *mgr, u32 flags);
+ int (*write_complete)(struct fpga_manager *mgr,
+ struct fpga_image_info *info);
void (*fpga_remove)(struct fpga_manager *mgr);
};
@@ -109,14 +127,17 @@ struct fpga_manager {
#define to_fpga_manager(d) container_of(d, struct fpga_manager, dev)
-int fpga_mgr_buf_load(struct fpga_manager *mgr, u32 flags,
+int fpga_mgr_buf_load(struct fpga_manager *mgr, struct fpga_image_info *info,
const char *buf, size_t count);
-int fpga_mgr_firmware_load(struct fpga_manager *mgr, u32 flags,
+int fpga_mgr_firmware_load(struct fpga_manager *mgr,
+ struct fpga_image_info *info,
const char *image_name);
struct fpga_manager *of_fpga_mgr_get(struct device_node *node);
+struct fpga_manager *fpga_mgr_get(struct device *dev);
+
void fpga_mgr_put(struct fpga_manager *mgr);
int fpga_mgr_register(struct device *dev, const char *name,
diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
index cd184bdca58f..42fe43fb0c80 100644
--- a/include/linux/hyperv.h
+++ b/include/linux/hyperv.h
@@ -696,7 +696,7 @@ enum vmbus_device_type {
HV_FCOPY,
HV_BACKUP,
HV_DM,
- HV_UNKOWN,
+ HV_UNKNOWN,
};
struct vmbus_device {
@@ -1119,6 +1119,12 @@ struct hv_driver {
struct device_driver driver;
+ /* dynamic device GUID's */
+ struct {
+ spinlock_t lock;
+ struct list_head list;
+ } dynids;
+
int (*probe)(struct hv_device *, const struct hv_vmbus_device_id *);
int (*remove)(struct hv_device *);
void (*shutdown)(struct hv_device *);
@@ -1447,6 +1453,7 @@ void hv_event_tasklet_enable(struct vmbus_channel *channel);
void hv_process_channel_removal(struct vmbus_channel *channel, u32 relid);
+void vmbus_setevent(struct vmbus_channel *channel);
/*
* Negotiated version with the Host.
*/
@@ -1479,10 +1486,11 @@ hv_get_ring_buffer(struct hv_ring_buffer_info *ring_info)
* there is room for the producer to send the pending packet.
*/
-static inline bool hv_need_to_signal_on_read(struct hv_ring_buffer_info *rbi)
+static inline void hv_signal_on_read(struct vmbus_channel *channel)
{
u32 cur_write_sz;
u32 pending_sz;
+ struct hv_ring_buffer_info *rbi = &channel->inbound;
/*
* Issue a full memory barrier before making the signaling decision.
@@ -1500,14 +1508,14 @@ static inline bool hv_need_to_signal_on_read(struct hv_ring_buffer_info *rbi)
pending_sz = READ_ONCE(rbi->ring_buffer->pending_send_sz);
/* If the other end is not blocked on write don't bother. */
if (pending_sz == 0)
- return false;
+ return;
cur_write_sz = hv_get_bytes_to_write(rbi);
if (cur_write_sz >= pending_sz)
- return true;
+ vmbus_setevent(channel);
- return false;
+ return;
}
/*
@@ -1519,31 +1527,23 @@ static inline struct vmpacket_descriptor *
get_next_pkt_raw(struct vmbus_channel *channel)
{
struct hv_ring_buffer_info *ring_info = &channel->inbound;
- u32 read_loc = ring_info->priv_read_index;
+ u32 priv_read_loc = ring_info->priv_read_index;
void *ring_buffer = hv_get_ring_buffer(ring_info);
- struct vmpacket_descriptor *cur_desc;
- u32 packetlen;
u32 dsize = ring_info->ring_datasize;
- u32 delta = read_loc - ring_info->ring_buffer->read_index;
+ /*
+ * delta is the difference between what is available to read and
+ * what was already consumed in place. We commit read index after
+ * the whole batch is processed.
+ */
+ u32 delta = priv_read_loc >= ring_info->ring_buffer->read_index ?
+ priv_read_loc - ring_info->ring_buffer->read_index :
+ (dsize - ring_info->ring_buffer->read_index) + priv_read_loc;
u32 bytes_avail_toread = (hv_get_bytes_to_read(ring_info) - delta);
if (bytes_avail_toread < sizeof(struct vmpacket_descriptor))
return NULL;
- if ((read_loc + sizeof(*cur_desc)) > dsize)
- return NULL;
-
- cur_desc = ring_buffer + read_loc;
- packetlen = cur_desc->len8 << 3;
-
- /*
- * If the packet under consideration is wrapping around,
- * return failure.
- */
- if ((read_loc + packetlen + VMBUS_PKT_TRAILER) > (dsize - 1))
- return NULL;
-
- return cur_desc;
+ return ring_buffer + priv_read_loc;
}
/*
@@ -1555,16 +1555,14 @@ static inline void put_pkt_raw(struct vmbus_channel *channel,
struct vmpacket_descriptor *desc)
{
struct hv_ring_buffer_info *ring_info = &channel->inbound;
- u32 read_loc = ring_info->priv_read_index;
u32 packetlen = desc->len8 << 3;
u32 dsize = ring_info->ring_datasize;
- if ((read_loc + packetlen + VMBUS_PKT_TRAILER) > dsize)
- BUG();
/*
* Include the packet trailer.
*/
ring_info->priv_read_index += packetlen + VMBUS_PKT_TRAILER;
+ ring_info->priv_read_index %= dsize;
}
/*
@@ -1589,8 +1587,7 @@ static inline void commit_rd_index(struct vmbus_channel *channel)
virt_rmb();
ring_info->ring_buffer->read_index = ring_info->priv_read_index;
- if (hv_need_to_signal_on_read(ring_info))
- vmbus_set_event(channel);
+ hv_signal_on_read(channel);
}
diff --git a/include/linux/mei_cl_bus.h b/include/linux/mei_cl_bus.h
index e746919530f5..a0d274fe08f1 100644
--- a/include/linux/mei_cl_bus.h
+++ b/include/linux/mei_cl_bus.h
@@ -8,8 +8,7 @@
struct mei_cl_device;
struct mei_device;
-typedef void (*mei_cldev_event_cb_t)(struct mei_cl_device *cldev,
- u32 events, void *context);
+typedef void (*mei_cldev_cb_t)(struct mei_cl_device *cldev);
/**
* struct mei_cl_device - MEI device handle
@@ -24,12 +23,12 @@ typedef void (*mei_cldev_event_cb_t)(struct mei_cl_device *cldev,
* @me_cl: me client
* @cl: mei client
* @name: device name
- * @event_work: async work to execute event callback
- * @event_cb: Drivers register this callback to get asynchronous ME
- * events (e.g. Rx buffer pending) notifications.
- * @event_context: event callback run context
- * @events_mask: Events bit mask requested by driver.
- * @events: Events bitmask sent to the driver.
+ * @rx_work: async work to execute Rx event callback
+ * @rx_cb: Drivers register this callback to get asynchronous ME
+ * Rx buffer pending notifications.
+ * @notif_work: async work to execute FW notif event callback
+ * @notif_cb: Drivers register this callback to get asynchronous ME
+ * FW notification pending notifications.
*
* @do_match: wheather device can be matched with a driver
* @is_added: device is already scanned
@@ -44,11 +43,10 @@ struct mei_cl_device {
struct mei_cl *cl;
char name[MEI_CL_NAME_SIZE];
- struct work_struct event_work;
- mei_cldev_event_cb_t event_cb;
- void *event_context;
- unsigned long events_mask;
- unsigned long events;
+ struct work_struct rx_work;
+ mei_cldev_cb_t rx_cb;
+ struct work_struct notif_work;
+ mei_cldev_cb_t notif_cb;
unsigned int do_match:1;
unsigned int is_added:1;
@@ -74,16 +72,27 @@ int __mei_cldev_driver_register(struct mei_cl_driver *cldrv,
void mei_cldev_driver_unregister(struct mei_cl_driver *cldrv);
-ssize_t mei_cldev_send(struct mei_cl_device *cldev, u8 *buf, size_t length);
-ssize_t mei_cldev_recv(struct mei_cl_device *cldev, u8 *buf, size_t length);
+/**
+ * module_mei_cl_driver - Helper macro for registering mei cl driver
+ *
+ * @__mei_cldrv: mei_cl_driver structure
+ *
+ * Helper macro for mei cl drivers which do not do anything special in module
+ * init/exit, for eliminating a boilerplate code.
+ */
+#define module_mei_cl_driver(__mei_cldrv) \
+ module_driver(__mei_cldrv, \
+ mei_cldev_driver_register,\
+ mei_cldev_driver_unregister)
-int mei_cldev_register_event_cb(struct mei_cl_device *cldev,
- unsigned long event_mask,
- mei_cldev_event_cb_t read_cb, void *context);
+ssize_t mei_cldev_send(struct mei_cl_device *cldev, u8 *buf, size_t length);
+ssize_t mei_cldev_recv(struct mei_cl_device *cldev, u8 *buf, size_t length);
+ssize_t mei_cldev_recv_nonblock(struct mei_cl_device *cldev, u8 *buf,
+ size_t length);
-#define MEI_CL_EVENT_RX 0
-#define MEI_CL_EVENT_TX 1
-#define MEI_CL_EVENT_NOTIF 2
+int mei_cldev_register_rx_cb(struct mei_cl_device *cldev, mei_cldev_cb_t rx_cb);
+int mei_cldev_register_notif_cb(struct mei_cl_device *cldev,
+ mei_cldev_cb_t notif_cb);
const uuid_le *mei_cldev_uuid(const struct mei_cl_device *cldev);
u8 mei_cldev_ver(const struct mei_cl_device *cldev);
diff --git a/include/linux/miscdevice.h b/include/linux/miscdevice.h
index 722698a43d79..a426cb55dc43 100644
--- a/include/linux/miscdevice.h
+++ b/include/linux/miscdevice.h
@@ -72,6 +72,13 @@ extern int misc_register(struct miscdevice *misc);
extern void misc_deregister(struct miscdevice *misc);
/*
+ * Helper macro for drivers that don't do anything special in the initcall.
+ * This helps in eleminating of boilerplate code.
+ */
+#define builtin_misc_device(__misc_device) \
+ builtin_driver(__misc_device, misc_register)
+
+/*
* Helper macro for drivers that don't do anything special in module init / exit
* call. This helps in eleminating of boilerplate code.
*/
diff --git a/include/linux/of.h b/include/linux/of.h
index 299aeb192727..d72f01009297 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -1266,6 +1266,18 @@ static inline bool of_device_is_system_power_controller(const struct device_node
* Overlay support
*/
+enum of_overlay_notify_action {
+ OF_OVERLAY_PRE_APPLY,
+ OF_OVERLAY_POST_APPLY,
+ OF_OVERLAY_PRE_REMOVE,
+ OF_OVERLAY_POST_REMOVE,
+};
+
+struct of_overlay_notify_data {
+ struct device_node *overlay;
+ struct device_node *target;
+};
+
#ifdef CONFIG_OF_OVERLAY
/* ID based overlays; the API for external users */
@@ -1273,6 +1285,9 @@ int of_overlay_create(struct device_node *tree);
int of_overlay_destroy(int id);
int of_overlay_destroy_all(void);
+int of_overlay_notifier_register(struct notifier_block *nb);
+int of_overlay_notifier_unregister(struct notifier_block *nb);
+
#else
static inline int of_overlay_create(struct device_node *tree)
@@ -1290,6 +1305,16 @@ static inline int of_overlay_destroy_all(void)
return -ENOTSUPP;
}
+static inline int of_overlay_notifier_register(struct notifier_block *nb)
+{
+ return 0;
+}
+
+static inline int of_overlay_notifier_unregister(struct notifier_block *nb)
+{
+ return 0;
+}
+
#endif
#endif /* _LINUX_OF_H */
diff --git a/include/linux/vme.h b/include/linux/vme.h
index ea6095deba20..8c589176c2f8 100644
--- a/include/linux/vme.h
+++ b/include/linux/vme.h
@@ -113,7 +113,6 @@ struct vme_driver {
int (*match)(struct vme_dev *);
int (*probe)(struct vme_dev *);
int (*remove)(struct vme_dev *);
- void (*shutdown)(void);
struct device_driver driver;
struct list_head devices;
};
diff --git a/mm/memory.c b/mm/memory.c
index 32e9b7aec366..c264f7cd3e47 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -4002,6 +4002,7 @@ int access_process_vm(struct task_struct *tsk, unsigned long addr,
return ret;
}
+EXPORT_SYMBOL_GPL(access_process_vm);
/*
* Print the name of a VMA.
diff --git a/mm/nommu.c b/mm/nommu.c
index 8b8faaf2a9e9..9720e0bab029 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -1878,6 +1878,7 @@ int access_process_vm(struct task_struct *tsk, unsigned long addr, void *buf, in
mmput(mm);
return len;
}
+EXPORT_SYMBOL_GPL(access_process_vm);
/**
* nommu_shrink_inode_mappings - Shrink the shared mappings on an inode
diff --git a/scripts/checkkconfigsymbols.py b/scripts/checkkconfigsymbols.py
index a32e4da4c117..3820f00b066a 100755
--- a/scripts/checkkconfigsymbols.py
+++ b/scripts/checkkconfigsymbols.py
@@ -88,7 +88,7 @@ def parse_options():
if args.commit and args.diff:
sys.exit("Please specify only one option at once.")
- if args.diff and not re.match(r"^[\w\-\.]+\.\.[\w\-\.]+$", args.diff):
+ if args.diff and not re.match(r"^[\w\-\.\^]+\.\.[\w\-\.\^]+$", args.diff):
sys.exit("Please specify valid input in the following format: "
"\'commit1..commit2\'")
diff --git a/tools/hv/Makefile b/tools/hv/Makefile
index a8c4644022a6..0d1e61b81844 100644
--- a/tools/hv/Makefile
+++ b/tools/hv/Makefile
@@ -1,9 +1,8 @@
# Makefile for Hyper-V tools
CC = $(CROSS_COMPILE)gcc
-PTHREAD_LIBS = -lpthread
WARNINGS = -Wall -Wextra
-CFLAGS = $(WARNINGS) -g $(PTHREAD_LIBS) $(shell getconf LFS_CFLAGS)
+CFLAGS = $(WARNINGS) -g $(shell getconf LFS_CFLAGS)
CFLAGS += -D__EXPORTED_HEADERS__ -I../../include/uapi -I../../include
diff --git a/tools/hv/hv_fcopy_daemon.c b/tools/hv/hv_fcopy_daemon.c
index fdc9ca4c0356..26ae609a9448 100644
--- a/tools/hv/hv_fcopy_daemon.c
+++ b/tools/hv/hv_fcopy_daemon.c
@@ -18,21 +18,14 @@
#include <sys/types.h>
-#include <sys/socket.h>
-#include <sys/poll.h>
-#include <linux/types.h>
-#include <linux/kdev_t.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
-#include <string.h>
-#include <ctype.h>
#include <errno.h>
#include <linux/hyperv.h>
#include <syslog.h>
#include <sys/stat.h>
#include <fcntl.h>
-#include <dirent.h>
#include <getopt.h>
static int target_fd;
diff --git a/tools/hv/hv_kvp_daemon.c b/tools/hv/hv_kvp_daemon.c
index bc7adb84e679..f1758fcbc37d 100644
--- a/tools/hv/hv_kvp_daemon.c
+++ b/tools/hv/hv_kvp_daemon.c
@@ -22,8 +22,6 @@
*/
-#include <sys/types.h>
-#include <sys/socket.h>
#include <sys/poll.h>
#include <sys/utsname.h>
#include <stdio.h>
@@ -34,7 +32,6 @@
#include <errno.h>
#include <arpa/inet.h>
#include <linux/hyperv.h>
-#include <linux/netlink.h>
#include <ifaddrs.h>
#include <netdb.h>
#include <syslog.h>
@@ -96,13 +93,13 @@ static struct utsname uts_buf;
#define KVP_CONFIG_LOC "/var/lib/hyperv"
+#ifndef KVP_SCRIPTS_PATH
+#define KVP_SCRIPTS_PATH "/usr/libexec/hypervkvpd/"
+#endif
+
#define MAX_FILE_NAME 100
#define ENTRIES_PER_BLOCK 50
-#ifndef SOL_NETLINK
-#define SOL_NETLINK 270
-#endif
-
struct kvp_record {
char key[HV_KVP_EXCHANGE_MAX_KEY_SIZE];
char value[HV_KVP_EXCHANGE_MAX_VALUE_SIZE];
@@ -702,7 +699,7 @@ static char *kvp_mac_to_if_name(char *mac)
if (dir == NULL)
return NULL;
- snprintf(dev_id, sizeof(dev_id), kvp_net_dir);
+ snprintf(dev_id, sizeof(dev_id), "%s", kvp_net_dir);
q = dev_id + strlen(kvp_net_dir);
while ((entry = readdir(dir)) != NULL) {
@@ -825,7 +822,7 @@ static void kvp_get_ipconfig_info(char *if_name,
* .
*/
- sprintf(cmd, "%s", "hv_get_dns_info");
+ sprintf(cmd, KVP_SCRIPTS_PATH "%s", "hv_get_dns_info");
/*
* Execute the command to gather DNS info.
@@ -842,7 +839,7 @@ static void kvp_get_ipconfig_info(char *if_name,
* Enabled: DHCP enabled.
*/
- sprintf(cmd, "%s %s", "hv_get_dhcp_info", if_name);
+ sprintf(cmd, KVP_SCRIPTS_PATH "%s %s", "hv_get_dhcp_info", if_name);
file = popen(cmd, "r");
if (file == NULL)
@@ -1348,7 +1345,8 @@ static int kvp_set_ip_info(char *if_name, struct hv_kvp_ipaddr_value *new_val)
* invoke the external script to do its magic.
*/
- snprintf(cmd, sizeof(cmd), "%s %s", "hv_set_ifconfig", if_file);
+ snprintf(cmd, sizeof(cmd), KVP_SCRIPTS_PATH "%s %s",
+ "hv_set_ifconfig", if_file);
if (system(cmd)) {
syslog(LOG_ERR, "Failed to execute cmd '%s'; error: %d %s",
cmd, errno, strerror(errno));