serial: sa1100: Use port lock wrappers

When a serial port is used for kernel console output, then all
modifications to the UART registers which are done from other contexts,
e.g. getty, termios, are interference points for the kernel console.

So far this has been ignored and the printk output is based on the
principle of hope. The rework of the console infrastructure which aims to
support threaded and atomic consoles, requires to mark sections which
modify the UART registers as unsafe. This allows the atomic write function
to make informed decisions and eventually to restore operational state. It
also allows to prevent the regular UART code from modifying UART registers
while printk output is in progress.

All modifications of UART registers are guarded by the UART port lock,
which provides an obvious synchronization point with the console
infrastructure.

To avoid adding this functionality to all UART drivers, wrap the
spin_[un]lock*() invocations for uart_port::lock into helper functions
which just contain the spin_[un]lock*() invocations for now. In a
subsequent step these helpers will gain the console synchronization
mechanisms.

Converted with coccinelle. No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20230914183831.587273-53-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 10 insertions, 10 deletions

diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c
index ad011f1e2f4d..be7bcd75d9f4 100644
--- a/drivers/tty/serial/sa1100.c
+++ b/drivers/tty/serial/sa1100.c
@@ -115,9 +115,9 @@ static void sa1100_timeout(struct timer_list *t)
 	unsigned long flags;
 
 	if (sport->port.state) {
-		spin_lock_irqsave(&sport->port.lock, flags);
+		uart_port_lock_irqsave(&sport->port, &flags);
 		sa1100_mctrl_check(sport);
-		spin_unlock_irqrestore(&sport->port.lock, flags);
+		uart_port_unlock_irqrestore(&sport->port, flags);
 
 		mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT);
 	}
@@ -247,7 +247,7 @@ static irqreturn_t sa1100_int(int irq, void *dev_id)
 	struct sa1100_port *sport = dev_id;
 	unsigned int status, pass_counter = 0;
 
-	spin_lock(&sport->port.lock);
+	uart_port_lock(&sport->port);
 	status = UART_GET_UTSR0(sport);
 	status &= SM_TO_UTSR0(sport->port.read_status_mask) | ~UTSR0_TFS;
 	do {
@@ -276,7 +276,7 @@ static irqreturn_t sa1100_int(int irq, void *dev_id)
 		status &= SM_TO_UTSR0(sport->port.read_status_mask) |
 			  ~UTSR0_TFS;
 	} while (status & (UTSR0_TFS | UTSR0_RFS | UTSR0_RID));
-	spin_unlock(&sport->port.lock);
+	uart_port_unlock(&sport->port);
 
 	return IRQ_HANDLED;
 }
@@ -321,14 +321,14 @@ static void sa1100_break_ctl(struct uart_port *port, int break_state)
 	unsigned long flags;
 	unsigned int utcr3;
 
-	spin_lock_irqsave(&sport->port.lock, flags);
+	uart_port_lock_irqsave(&sport->port, &flags);
 	utcr3 = UART_GET_UTCR3(sport);
 	if (break_state == -1)
 		utcr3 |= UTCR3_BRK;
 	else
 		utcr3 &= ~UTCR3_BRK;
 	UART_PUT_UTCR3(sport, utcr3);
-	spin_unlock_irqrestore(&sport->port.lock, flags);
+	uart_port_unlock_irqrestore(&sport->port, flags);
 }
 
 static int sa1100_startup(struct uart_port *port)
@@ -354,9 +354,9 @@ static int sa1100_startup(struct uart_port *port)
 	/*
 	 * Enable modem status interrupts
 	 */
-	spin_lock_irq(&sport->port.lock);
+	uart_port_lock_irq(&sport->port);
 	sa1100_enable_ms(&sport->port);
-	spin_unlock_irq(&sport->port.lock);
+	uart_port_unlock_irq(&sport->port);
 
 	return 0;
 }
@@ -423,7 +423,7 @@ sa1100_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	del_timer_sync(&sport->timer);
 
-	spin_lock_irqsave(&sport->port.lock, flags);
+	uart_port_lock_irqsave(&sport->port, &flags);
 
 	sport->port.read_status_mask &= UTSR0_TO_SM(UTSR0_TFS);
 	sport->port.read_status_mask |= UTSR1_TO_SM(UTSR1_ROR);
@@ -485,7 +485,7 @@ sa1100_set_termios(struct uart_port *port, struct ktermios *termios,
 	if (UART_ENABLE_MS(&sport->port, termios->c_cflag))
 		sa1100_enable_ms(&sport->port);
 
-	spin_unlock_irqrestore(&sport->port.lock, flags);
+	uart_port_unlock_irqrestore(&sport->port, flags);
 }
 
 static const char *sa1100_type(struct uart_port *port)