Merge tag 'samsung-dt-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt

Samsung DTS ARM changes for v5.1

1. Extend support for Aries family of mobile devices (e.g. Samsung
   Galaxy S) based on S5Pv210 SoC: DRM Rotator, FIMD, PWM vibrator,
   power off, touchscreen, Broadcom BCM4329 Bluetooth and cpufreq.
2. Remove hardcoded bootargs on Galaxy S family (proper support in
   U-Boot).
3. Fix minor DTC warnings.
4. Fix Exynos4412 Odroid X2/U3 conflicting eMMC GPIO settings and regulator
   properties.
5. Fix the eMMC RTSN pin breaking proper reboot on X2.

* tag 'samsung-dt-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: Fix pinctrl definition for eMMC RTSN line on Odroid X2/U3
  ARM: dts: exynos: Fix eMMC regulator properties on Odroid U3 boards
  ARM: dts: exynos: Fix conflicting fixed-regulator GPIO flags and properties
  ARM: dts: s3c2416: Fix xti node's missing reg property warning
  ARM: dts: s5pv210: Fix onenand's unit address format warning
  ARM: dts: s5pv210: Add DMC nodes
  ARM: dts: s5pv210: Add support for more devices present on Aries
  ARM: dts: s5pv210: Add reserved memory for MFC on Aries
  ARM: dts: s5pv210: Remove hardcoded bootargs on Galaxy S and Fascinate 4G
  ARM: dts: s5pv210: Use correct fimd variant
  ARM: dts: s5pv210: Add node for exynos-rotator

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

8 files changed, 125 insertions, 27 deletions

diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 3a9eb1e91c45..08d3a0a7b4eb 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -49,7 +49,7 @@
 	};
 
 	emmc_pwrseq: pwrseq {
-		pinctrl-0 = <&sd1_cd>;
+		pinctrl-0 = <&emmc_rstn>;
 		pinctrl-names = "default";
 		compatible = "mmc-pwrseq-emmc";
 		reset-gpios = <&gpk1 2 GPIO_ACTIVE_LOW>;
@@ -165,12 +165,6 @@
 	cpu0-supply = <&buck2_reg>;
 };
 
-/* RSTN signal for eMMC */
-&sd1_cd {
-	samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-};
-
 &pinctrl_1 {
 	gpio_power_key: power_key {
 		samsung,pins = "gpx1-3";
@@ -188,6 +182,11 @@
 		samsung,pins = "gpx3-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 	};
+
+	emmc_rstn: emmc-rstn {
+		samsung,pins = "gpk1-2";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
 };
 
 &ehci {
@@ -390,7 +389,6 @@
 				regulator-name = "LDO20_1.8V";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
 			};
 
 			ldo21_reg: LDO21 {
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 348556fcdd9d..a2251581f6b6 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -53,7 +53,7 @@
 		regulator-name = "p3v3_en";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		gpio = <&gpa1 1 GPIO_ACTIVE_LOW>;
+		gpio = <&gpa1 1 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		regulator-always-on;
 	};
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 2ca9319f48f2..b44f03ef3b27 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -100,7 +100,7 @@
 			regulator-name = "VDD_33ON_2.8V";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
-			gpio = <&gpx1 1 GPIO_ACTIVE_LOW>;
+			gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 
diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts
index 5164386aff3a..cb371bf72f64 100644
--- a/arch/arm/boot/dts/s3c2416-smdk2416.dts
+++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts
@@ -19,9 +19,12 @@
 
 	clocks {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		xti: xti {
+		xti: xti@0 {
 			compatible = "fixed-clock";
+			reg = <0>;
 			clock-frequency = <12000000>;
 			clock-output-names = "xti";
 			#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
index 575094ea7024..8ff70b856334 100644
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -23,6 +23,31 @@
 			0x50000000 0x08000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mfc_left: region@43000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x43000000 0x2000000>;
+		};
+
+		mfc_right: region@51000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x51000000 0x2000000>;
+		};
+	};
+
+	vibrator_pwr: regulator-fixed-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vibrator-en";
+		enable-active-high;
+		gpio = <&gpj1 1 GPIO_ACTIVE_HIGH>;
+	};
+
 	wifi_pwrseq: wifi-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpg1 2 GPIO_ACTIVE_LOW>;
@@ -296,6 +321,22 @@
 			reg = <0x36>;
 		};
 	};
+
+	vibrator: pwm-vibrator {
+		compatible = "pwm-vibrator";
+		pwms = <&pwm 1 44642 0>;
+		pwm-names = "enable";
+		vcc-supply = <&vibrator_pwr>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_out>;
+	};
+
+	poweroff: syscon-poweroff {
+		compatible = "syscon-poweroff";
+		regmap = <&pmu_syscon>;
+		offset = <0x681c>; /* PS_HOLD_CONTROL */
+		value = <0x5200>;
+	};
 };
 
 &fimd {
@@ -329,6 +370,27 @@
 	status = "okay";
 };
 
+&i2c2 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+	samsung,i2c-slave-addr = <0x10>;
+	status = "okay";
+
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		interrupt-parent = <&gpj0>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_irq>;
+		reset-gpios = <&gpj1 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mfc {
+	memory-region = <&mfc_left>, <&mfc_right>;
+};
+
 &pinctrl0 {
 	wlan_bt_en: wlan-bt-en {
 		samsung,pins = "gpb-5";
@@ -350,6 +412,13 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
+	bt_host_wake: bt-host-wake {
+		samsung,pins = "gph2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
 	tf_detect: tf-detect {
 		samsung,pins = "gph3-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
@@ -362,6 +431,17 @@
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
+
+	ts_irq: ts-irq {
+		samsung,pins = "gpj0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&pwm {
+	samsung,pwm-outputs = <1>;
 };
 
 &sdhci1 {
@@ -399,6 +479,16 @@
 
 &uart0 {
 	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <115200>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_data &uart0_fctl &bt_host_wake>;
+		shutdown-gpios = <&gpb 3 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpg3 4 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gph2 5 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &uart1 {
diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
index ccf761b1babf..07a8d9bbe5b8 100644
--- a/arch/arm/boot/dts/s5pv210-fascinate4g.dts
+++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
@@ -11,13 +11,6 @@
 
 	chosen {
 		stdout-path = &uart2;
-		/*
-		 * It's hard to change those parameters in stock bootloader,
-		 * since it requires special hardware/cable.
-		 * Let's hardocde bootargs for now, till u-boot port is finished,
-		 * with which it should be easier.
-		 */
-		bootargs = "root=/dev/mmcblk1p1 rw rootwait ignore_loglevel earlyprintk";
 	};
 
 	gpio-keys {
diff --git a/arch/arm/boot/dts/s5pv210-galaxys.dts b/arch/arm/boot/dts/s5pv210-galaxys.dts
index 842276749717..cf161bbfbacf 100644
--- a/arch/arm/boot/dts/s5pv210-galaxys.dts
+++ b/arch/arm/boot/dts/s5pv210-galaxys.dts
@@ -11,13 +11,6 @@
 
 	chosen {
 		stdout-path = &uart2;
-		/*
-		 * It's hard to change those parameters in stock bootloader,
-		 * since it requires special hardware/cable.
-		 * Let's hardocde bootargs for now, till u-boot port is finished,
-		 * with which it should be easier.
-		 */
-		bootargs = "root=/dev/mmcblk2p1 rw rootwait ignore_loglevel earlyprintk";
 	};
 
 	nand_pwrseq: nand-pwrseq {
diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index 12eac8930eac..a44d5eb56bed 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -25,6 +25,8 @@
 
 	aliases {
 		csis0 = &csis0;
+		dmc0 = &dmc0;
+		dmc1 = &dmc1;
 		fimc0 = &fimc0;
 		fimc1 = &fimc1;
 		fimc2 = &fimc2;
@@ -78,7 +80,7 @@
 			};
 		};
 
-		onenand: onenand@b0000000 {
+		onenand: onenand@b0600000 {
 			compatible = "samsung,s5pv210-onenand";
 			reg = <0xb0600000 0x2000>,
 				<0xb0000000 0x20000>,
@@ -511,7 +513,7 @@
 		};
 
 		fimd: fimd@f8000000 {
-			compatible = "samsung,exynos4210-fimd";
+			compatible = "samsung,s5pv210-fimd";
 			interrupt-parent = <&vic2>;
 			reg = <0xf8000000 0x20000>;
 			interrupt-names = "fifo", "vsync", "lcd_sys";
@@ -521,6 +523,16 @@
 			status = "disabled";
 		};
 
+		dmc0: dmc@f0000000 {
+			compatible = "samsung,s5pv210-dmc";
+			reg = <0xf0000000 0x1000>;
+		};
+
+		dmc1: dmc@f1400000 {
+			compatible = "samsung,s5pv210-dmc";
+			reg = <0xf1400000 0x1000>;
+		};
+
 		g2d: g2d@fa000000 {
 			compatible = "samsung,s5pv210-g2d";
 			reg = <0xfa000000 0x1000>;
@@ -542,6 +554,15 @@
 			#dma-requests = <1>;
 		};
 
+		rotator: rotator@fa300000 {
+			compatible = "samsung,s5pv210-rotator";
+			reg = <0xfa300000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <4>;
+			clocks = <&clocks CLK_ROTATOR>;
+			clock-names = "rotator";
+		};
+
 		i2c1: i2c@fab00000 {
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0xfab00000 0x1000>;