usb: host: ehci-mxc: Remove the driver

The ehci-mxc driver was only used by i.MX non-DT platforms.

Since 5.10-rc1, i.MX has been converted to a DT-only platform and all
board files are gone.

Remove the ehci-mxc driver as there are no more users at all.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20201113171231.2205-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 files changed, 0 insertions, 235 deletions

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index a633e9c15f7e..31e59309da1f 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -213,13 +213,6 @@ config USB_EHCI_FSL
 	help
 	  Variation of ARC USB block used in some Freescale chips.
 
-config USB_EHCI_MXC
-	tristate "Support for Freescale i.MX on-chip EHCI USB controller"
-	depends on ARCH_MXC || COMPILE_TEST
-	select USB_EHCI_ROOT_HUB_TT
-	help
-	  Variation of ARC USB block used in some Freescale chips.
-
 config USB_EHCI_HCD_NPCM7XX
 	tristate "Support for Nuvoton NPCM7XX on-chip EHCI USB controller"
 	depends on (USB_EHCI_HCD && ARCH_NPCM7XX) || COMPILE_TEST
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index d03f6f0764d2..c1b08703af10 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -40,7 +40,6 @@ obj-$(CONFIG_USB_PCI)	+= pci-quirks.o
 obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
 obj-$(CONFIG_USB_EHCI_PCI)	+= ehci-pci.o
 obj-$(CONFIG_USB_EHCI_HCD_PLATFORM)	+= ehci-platform.o
-obj-$(CONFIG_USB_EHCI_MXC)	+= ehci-mxc.o
 obj-$(CONFIG_USB_EHCI_HCD_NPCM7XX)	+= ehci-npcm7xx.o
 obj-$(CONFIG_USB_EHCI_HCD_OMAP)	+= ehci-omap.o
 obj-$(CONFIG_USB_EHCI_HCD_ORION)	+= ehci-orion.o
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
deleted file mode 100644
index dc2676320527..000000000000
--- a/drivers/usb/host/ehci-mxc.c
+++ /dev/null
@@ -1,213 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (c) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <linux/slab.h>
-#include <linux/usb.h>
-#include <linux/usb/hcd.h>
-#include <linux/platform_data/usb-ehci-mxc.h>
-#include "ehci.h"
-
-#define DRIVER_DESC "Freescale On-Chip EHCI Host driver"
-
-static const char hcd_name[] = "ehci-mxc";
-
-#define ULPI_VIEWPORT_OFFSET	0x170
-
-struct ehci_mxc_priv {
-	struct clk *usbclk, *ahbclk, *phyclk;
-};
-
-static struct hc_driver __read_mostly ehci_mxc_hc_driver;
-
-static const struct ehci_driver_overrides ehci_mxc_overrides __initconst = {
-	.extra_priv_size =	sizeof(struct ehci_mxc_priv),
-};
-
-static int ehci_mxc_drv_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct mxc_usbh_platform_data *pdata = dev_get_platdata(dev);
-	struct usb_hcd *hcd;
-	struct resource *res;
-	int irq, ret;
-	struct ehci_mxc_priv *priv;
-	struct ehci_hcd *ehci;
-
-	if (!pdata) {
-		dev_err(dev, "No platform data given, bailing out.\n");
-		return -EINVAL;
-	}
-
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
-		return irq;
-
-	hcd = usb_create_hcd(&ehci_mxc_hc_driver, dev, dev_name(dev));
-	if (!hcd)
-		return -ENOMEM;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	hcd->regs = devm_ioremap_resource(dev, res);
-	if (IS_ERR(hcd->regs)) {
-		ret = PTR_ERR(hcd->regs);
-		goto err_alloc;
-	}
-	hcd->rsrc_start = res->start;
-	hcd->rsrc_len = resource_size(res);
-
-	hcd->has_tt = 1;
-	ehci = hcd_to_ehci(hcd);
-	priv = (struct ehci_mxc_priv *) ehci->priv;
-
-	/* enable clocks */
-	priv->usbclk = devm_clk_get(dev, "ipg");
-	if (IS_ERR(priv->usbclk)) {
-		ret = PTR_ERR(priv->usbclk);
-		goto err_alloc;
-	}
-	clk_prepare_enable(priv->usbclk);
-
-	priv->ahbclk = devm_clk_get(dev, "ahb");
-	if (IS_ERR(priv->ahbclk)) {
-		ret = PTR_ERR(priv->ahbclk);
-		goto err_clk_ahb;
-	}
-	clk_prepare_enable(priv->ahbclk);
-
-	/* "dr" device has its own clock on i.MX51 */
-	priv->phyclk = devm_clk_get(dev, "phy");
-	if (IS_ERR(priv->phyclk))
-		priv->phyclk = NULL;
-	if (priv->phyclk)
-		clk_prepare_enable(priv->phyclk);
-
-	/* call platform specific init function */
-	if (pdata->init) {
-		ret = pdata->init(pdev);
-		if (ret) {
-			dev_err(dev, "platform init failed\n");
-			goto err_init;
-		}
-		/* platforms need some time to settle changed IO settings */
-		mdelay(10);
-	}
-
-	/* EHCI registers start at offset 0x100 */
-	ehci->caps = hcd->regs + 0x100;
-	ehci->regs = hcd->regs + 0x100 +
-		HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
-
-	/* set up the PORTSCx register */
-	ehci_writel(ehci, pdata->portsc, &ehci->regs->port_status[0]);
-
-	/* is this really needed? */
-	msleep(10);
-
-	/* Initialize the transceiver */
-	if (pdata->otg) {
-		pdata->otg->io_priv = hcd->regs + ULPI_VIEWPORT_OFFSET;
-		ret = usb_phy_init(pdata->otg);
-		if (ret) {
-			dev_err(dev, "unable to init transceiver, probably missing\n");
-			ret = -ENODEV;
-			goto err_add;
-		}
-		ret = otg_set_vbus(pdata->otg->otg, 1);
-		if (ret) {
-			dev_err(dev, "unable to enable vbus on transceiver\n");
-			goto err_add;
-		}
-	}
-
-	platform_set_drvdata(pdev, hcd);
-
-	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
-	if (ret)
-		goto err_add;
-
-	device_wakeup_enable(hcd->self.controller);
-	return 0;
-
-err_add:
-	if (pdata && pdata->exit)
-		pdata->exit(pdev);
-err_init:
-	if (priv->phyclk)
-		clk_disable_unprepare(priv->phyclk);
-
-	clk_disable_unprepare(priv->ahbclk);
-err_clk_ahb:
-	clk_disable_unprepare(priv->usbclk);
-err_alloc:
-	usb_put_hcd(hcd);
-	return ret;
-}
-
-static int ehci_mxc_drv_remove(struct platform_device *pdev)
-{
-	struct mxc_usbh_platform_data *pdata = dev_get_platdata(&pdev->dev);
-	struct usb_hcd *hcd = platform_get_drvdata(pdev);
-	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-	struct ehci_mxc_priv *priv = (struct ehci_mxc_priv *) ehci->priv;
-
-	usb_remove_hcd(hcd);
-
-	if (pdata && pdata->exit)
-		pdata->exit(pdev);
-
-	if (pdata && pdata->otg)
-		usb_phy_shutdown(pdata->otg);
-
-	clk_disable_unprepare(priv->usbclk);
-	clk_disable_unprepare(priv->ahbclk);
-
-	if (priv->phyclk)
-		clk_disable_unprepare(priv->phyclk);
-
-	usb_put_hcd(hcd);
-	return 0;
-}
-
-MODULE_ALIAS("platform:mxc-ehci");
-
-static struct platform_driver ehci_mxc_driver = {
-	.probe = ehci_mxc_drv_probe,
-	.remove = ehci_mxc_drv_remove,
-	.shutdown = usb_hcd_platform_shutdown,
-	.driver = {
-		   .name = "mxc-ehci",
-	},
-};
-
-static int __init ehci_mxc_init(void)
-{
-	if (usb_disabled())
-		return -ENODEV;
-
-	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
-
-	ehci_init_driver(&ehci_mxc_hc_driver, &ehci_mxc_overrides);
-	return platform_driver_register(&ehci_mxc_driver);
-}
-module_init(ehci_mxc_init);
-
-static void __exit ehci_mxc_cleanup(void)
-{
-	platform_driver_unregister(&ehci_mxc_driver);
-}
-module_exit(ehci_mxc_cleanup);
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_AUTHOR("Sascha Hauer");
-MODULE_LICENSE("GPL");
diff --git a/include/linux/platform_data/usb-ehci-mxc.h b/include/linux/platform_data/usb-ehci-mxc.h
deleted file mode 100644
index ad9794d09bc8..000000000000
--- a/include/linux/platform_data/usb-ehci-mxc.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __INCLUDE_ASM_ARCH_MXC_EHCI_H
-#define __INCLUDE_ASM_ARCH_MXC_EHCI_H
-
-struct mxc_usbh_platform_data {
-	int (*init)(struct platform_device *pdev);
-	int (*exit)(struct platform_device *pdev);
-
-	unsigned int		 portsc;
-	struct usb_phy		*otg;
-};
-
-#endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */
-