diff options
| author | Alvin Šipraga <alsi@bang-olufsen.dk> | 2021-11-29 11:30:19 +0100 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2021-11-29 12:51:37 +0000 |
| commit | ef136837aaf6f37f2dec78551671a6883f868d69 (patch) | |
| tree | f6435ec2b23daec6623e6721cab2ecd06b1bf045 | |
| parent | 1ecab9370eef94a334c790fd7ae584b88de56545 (diff) | |
net: dsa: rtl8365mb: set RGMII RX delay in steps of 0.3 ns
A contact at Realtek has clarified what exactly the units of RGMII RX
delay are. The answer is that the unit of RX delay is "about 0.3 ns".
Take this into account when parsing rx-internal-delay-ps by
approximating the closest step value. Delays of more than 2.1 ns are
rejected.
This obviously contradicts the previous assumption in the driver that a
step value of 4 was "about 2 ns", but Realtek also points out that it is
easy to find more than one RX delay step value which makes RGMII work.
Fixes: 4af2950c50c8 ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC")
Cc: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
| -rw-r--r-- | drivers/net/dsa/rtl8365mb.c | 15 |
1 files changed, 6 insertions, 9 deletions
diff --git a/drivers/net/dsa/rtl8365mb.c b/drivers/net/dsa/rtl8365mb.c index c52225d115d4..bb65576ebf3c 100644 --- a/drivers/net/dsa/rtl8365mb.c +++ b/drivers/net/dsa/rtl8365mb.c @@ -760,7 +760,8 @@ static int rtl8365mb_ext_config_rgmii(struct realtek_smi *smi, int port, * 0 = no delay, 1 = 2 ns delay * RX delay: * 0 = no delay, 7 = maximum delay - * No units are specified, but there are a total of 8 steps. + * Each step is approximately 0.3 ns, so the maximum delay is about + * 2.1 ns. * * The vendor driver also states that this must be configured *before* * forcing the external interface into a particular mode, which is done @@ -771,10 +772,6 @@ static int rtl8365mb_ext_config_rgmii(struct realtek_smi *smi, int port, * specified. We ignore the detail of the RGMII interface mode * (RGMII_{RXID, TXID, etc.}), as this is considered to be a PHY-only * property. - * - * For the RX delay, we assume that a register value of 4 corresponds to - * 2 ns. But this is just an educated guess, so ignore all other values - * to avoid too much confusion. */ if (!of_property_read_u32(dn, "tx-internal-delay-ps", &val)) { val = val / 1000; /* convert to ns */ @@ -787,13 +784,13 @@ static int rtl8365mb_ext_config_rgmii(struct realtek_smi *smi, int port, } if (!of_property_read_u32(dn, "rx-internal-delay-ps", &val)) { - val = val / 1000; /* convert to ns */ + val = DIV_ROUND_CLOSEST(val, 300); /* convert to 0.3 ns step */ - if (val == 0 || val == 2) - rx_delay = val * 2; + if (val <= 7) + rx_delay = val; else dev_warn(smi->dev, - "EXT port RX delay must be 0 to 2 ns\n"); + "EXT port RX delay must be 0 to 2.1 ns\n"); } ret = regmap_update_bits( |