diff options
| author | Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com> | 2025-11-11 16:08:01 +0800 |
|---|---|---|
| committer | Borislav Petkov (AMD) <bp@alien8.de> | 2025-11-11 13:48:13 +0100 |
| commit | fd3ecda38fe0cb713d167b5477d25f6b350f0514 (patch) | |
| tree | db5665a1ae19d75ea7c41f01ddad151971e6beb0 | |
| parent | 2cf95b9baa52262bfb645cb3c04f902dd50c29e2 (diff) | |
EDAC/altera: Handle OCRAM ECC enable after warm reset
The OCRAM ECC is always enabled either by the BootROM or by the Secure Device
Manager (SDM) during a power-on reset on SoCFPGA.
However, during a warm reset, the OCRAM content is retained to preserve data,
while the control and status registers are reset to their default values. As
a result, ECC must be explicitly re-enabled after a warm reset.
Fixes: 17e47dc6db4f ("EDAC/altera: Add Stratix10 OCRAM ECC support")
Signed-off-by: Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251111080801.1279401-1-niravkumarlaxmidas.rabara@altera.com
| -rw-r--r-- | drivers/edac/altera_edac.c | 18 |
1 files changed, 15 insertions, 3 deletions
diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c index 103b2c2eba2a..a776d61027f2 100644 --- a/drivers/edac/altera_edac.c +++ b/drivers/edac/altera_edac.c @@ -1184,10 +1184,22 @@ altr_check_ocram_deps_init(struct altr_edac_device_dev *device) if (ret) return ret; - /* Verify OCRAM has been initialized */ + /* + * Verify that OCRAM has been initialized. + * During a warm reset, OCRAM contents are retained, but the control + * and status registers are reset to their default values. Therefore, + * ECC must be explicitly re-enabled in the control register. + * Error condition: if INITCOMPLETEA is clear and ECC_EN is already set. + */ if (!ecc_test_bits(ALTR_A10_ECC_INITCOMPLETEA, - (base + ALTR_A10_ECC_INITSTAT_OFST))) - return -ENODEV; + (base + ALTR_A10_ECC_INITSTAT_OFST))) { + if (!ecc_test_bits(ALTR_A10_ECC_EN, + (base + ALTR_A10_ECC_CTRL_OFST))) + ecc_set_bits(ALTR_A10_ECC_EN, + (base + ALTR_A10_ECC_CTRL_OFST)); + else + return -ENODEV; + } /* Enable IRQ on Single Bit Error */ writel(ALTR_A10_ECC_SERRINTEN, (base + ALTR_A10_ECC_ERRINTENS_OFST)); |