Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Support AES128-CCM ciphers in kTLS, from Vakul Garg.

   2) Add fib_sync_mem to control the amount of dirty memory we allow to
      queue up between synchronize RCU calls, from David Ahern.

   3) Make flow classifier more lockless, from Vlad Buslov.

   4) Add PHY downshift support to aquantia driver, from Heiner
      Kallweit.

   5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces
      contention on SLAB spinlocks in heavy RPC workloads.

   6) Partial GSO offload support in XFRM, from Boris Pismenny.

   7) Add fast link down support to ethtool, from Heiner Kallweit.

   8) Use siphash for IP ID generator, from Eric Dumazet.

   9) Pull nexthops even further out from ipv4/ipv6 routes and FIB
      entries, from David Ahern.

  10) Move skb->xmit_more into a per-cpu variable, from Florian
      Westphal.

  11) Improve eBPF verifier speed and increase maximum program size,
      from Alexei Starovoitov.

  12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit
      spinlocks. From Neil Brown.

  13) Allow tunneling with GUE encap in ipvs, from Jacky Hu.

  14) Improve link partner cap detection in generic PHY code, from
      Heiner Kallweit.

  15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan
      Maguire.

  16) Remove SKB list implementation assumptions in SCTP, your's truly.

  17) Various cleanups, optimizations, and simplifications in r8169
      driver. From Heiner Kallweit.

  18) Add memory accounting on TX and RX path of SCTP, from Xin Long.

  19) Switch PHY drivers over to use dynamic featue detection, from
      Heiner Kallweit.

  20) Support flow steering without masking in dpaa2-eth, from Ioana
      Ciocoi.

  21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri
      Pirko.

  22) Increase the strict parsing of current and future netlink
      attributes, also export such policies to userspace. From Johannes
      Berg.

  23) Allow DSA tag drivers to be modular, from Andrew Lunn.

  24) Remove legacy DSA probing support, also from Andrew Lunn.

  25) Allow ll_temac driver to be used on non-x86 platforms, from Esben
      Haabendal.

  26) Add a generic tracepoint for TX queue timeouts to ease debugging,
      from Cong Wang.

  27) More indirect call optimizations, from Paolo Abeni"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits)
  cxgb4: Fix error path in cxgb4_init_module
  net: phy: improve pause mode reporting in phy_print_status
  dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings
  net: macb: Change interrupt and napi enable order in open
  net: ll_temac: Improve error message on error IRQ
  net/sched: remove block pointer from common offload structure
  net: ethernet: support of_get_mac_address new ERR_PTR error
  net: usb: smsc: fix warning reported by kbuild test robot
  staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check
  net: dsa: support of_get_mac_address new ERR_PTR error
  net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats
  vrf: sit mtu should not be updated when vrf netdev is the link
  net: dsa: Fix error cleanup path in dsa_init_module
  l2tp: Fix possible NULL pointer dereference
  taprio: add null check on sched_nest to avoid potential null pointer dereference
  net: mvpp2: cls: fix less than zero check on a u32 variable
  net_sched: sch_fq: handle non connected flows
  net_sched: sch_fq: do not assume EDT packets are ordered
  net: hns3: use devm_kcalloc when allocating desc_cb
  net: hns3: some cleanup for struct hns3_enet_ring
  ...

2 files changed, 0 insertions, 138 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-net-batman-adv b/Documentation/ABI/testing/sysfs-class-net-batman-adv
deleted file mode 100644
index 898106849e27..000000000000
--- a/Documentation/ABI/testing/sysfs-class-net-batman-adv
+++ /dev/null
@@ -1,30 +0,0 @@
-
-What:           /sys/class/net/<iface>/batman-adv/elp_interval
-Date:           Feb 2014
-Contact:        Linus Lüssing <linus.luessing@web.de>
-Description:
-                Defines the interval in milliseconds in which batman
-                emits probing packets for neighbor sensing (ELP).
-
-What:           /sys/class/net/<iface>/batman-adv/iface_status
-Date:           May 2010
-Contact:        Marek Lindner <mareklindner@neomailbox.ch>
-Description:
-                Indicates the status of <iface> as it is seen by batman.
-
-What:           /sys/class/net/<iface>/batman-adv/mesh_iface
-Date:           May 2010
-Contact:        Marek Lindner <mareklindner@neomailbox.ch>
-Description:
-                The /sys/class/net/<iface>/batman-adv/mesh_iface file
-                displays the batman mesh interface this <iface>
-                currently is associated with.
-
-What:           /sys/class/net/<iface>/batman-adv/throughput_override
-Date:           Feb 2014
-Contact:        Antonio Quartulli <a@unstable.cc>
-description:
-                Defines the throughput value to be used by B.A.T.M.A.N. V
-                when estimating the link throughput using this interface.
-                If the value is set to 0 then batman-adv will try to
-                estimate the throughput by itself.
diff --git a/Documentation/ABI/testing/sysfs-class-net-mesh b/Documentation/ABI/testing/sysfs-class-net-mesh
deleted file mode 100644
index c2b956d44a95..000000000000
--- a/Documentation/ABI/testing/sysfs-class-net-mesh
+++ /dev/null
@@ -1,108 +0,0 @@
-
-What:           /sys/class/net/<mesh_iface>/mesh/aggregated_ogms
-Date:           May 2010
-Contact:        Marek Lindner <mareklindner@neomailbox.ch>
-Description:
-                Indicates whether the batman protocol messages of the
-                mesh <mesh_iface> shall be aggregated or not.
-
-What:           /sys/class/net/<mesh_iface>/mesh/<vlan_subdir>/ap_isolation
-Date:           May 2011
-Contact:        Antonio Quartulli <a@unstable.cc>
-Description:
-                Indicates whether the data traffic going from a
-                wireless client to another wireless client will be
-                silently dropped. <vlan_subdir> is empty when referring
-		to the untagged lan.
-
-What:           /sys/class/net/<mesh_iface>/mesh/bonding
-Date:           June 2010
-Contact:        Simon Wunderlich <sw@simonwunderlich.de>
-Description:
-                Indicates whether the data traffic going through the
-                mesh will be sent using multiple interfaces at the
-                same time (if available).
-
-What:           /sys/class/net/<mesh_iface>/mesh/bridge_loop_avoidance
-Date:           November 2011
-Contact:        Simon Wunderlich <sw@simonwunderlich.de>
-Description:
-                Indicates whether the bridge loop avoidance feature
-                is enabled. This feature detects and avoids loops
-                between the mesh and devices bridged with the soft
-                interface <mesh_iface>.
-
-What:           /sys/class/net/<mesh_iface>/mesh/fragmentation
-Date:           October 2010
-Contact:        Andreas Langer <an.langer@gmx.de>
-Description:
-                Indicates whether the data traffic going through the
-                mesh will be fragmented or silently discarded if the
-                packet size exceeds the outgoing interface MTU.
-
-What:           /sys/class/net/<mesh_iface>/mesh/gw_bandwidth
-Date:           October 2010
-Contact:        Marek Lindner <mareklindner@neomailbox.ch>
-Description:
-                Defines the bandwidth which is propagated by this
-                node if gw_mode was set to 'server'.
-
-What:           /sys/class/net/<mesh_iface>/mesh/gw_mode
-Date:           October 2010
-Contact:        Marek Lindner <mareklindner@neomailbox.ch>
-Description:
-                Defines the state of the gateway features. Can be
-                either 'off', 'client' or 'server'.
-
-What:           /sys/class/net/<mesh_iface>/mesh/gw_sel_class
-Date:           October 2010
-Contact:        Marek Lindner <mareklindner@neomailbox.ch>
-Description:
-                Defines the selection criteria this node will use
-                to choose a gateway if gw_mode was set to 'client'.
-
-What:           /sys/class/net/<mesh_iface>/mesh/hop_penalty
-Date:           Oct 2010
-Contact:        Linus Lüssing <linus.luessing@web.de>
-Description:
-                Defines the penalty which will be applied to an
-                originator message's tq-field on every hop.
-
-What:		/sys/class/net/<mesh_iface>/mesh/isolation_mark
-Date:		Nov 2013
-Contact:	Antonio Quartulli <a@unstable.cc>
-Description:
-		Defines the isolation mark (and its bitmask) which
-		is used to classify clients as "isolated" by the
-		Extended Isolation feature.
-
-What:           /sys/class/net/<mesh_iface>/mesh/multicast_mode
-Date:           Feb 2014
-Contact:        Linus Lüssing <linus.luessing@web.de>
-Description:
-                Indicates whether multicast optimizations are enabled
-                or disabled. If set to zero then all nodes in the
-                mesh are going to use classic flooding for any
-                multicast packet with no optimizations.
-
-What:           /sys/class/net/<mesh_iface>/mesh/network_coding
-Date:           Nov 2012
-Contact:        Martin Hundeboll <martin@hundeboll.net>
-Description:
-                Controls whether Network Coding (using some magic
-                to send fewer wifi packets but still the same
-                content) is enabled or not.
-
-What:           /sys/class/net/<mesh_iface>/mesh/orig_interval
-Date:           May 2010
-Contact:        Marek Lindner <mareklindner@neomailbox.ch>
-Description:
-                Defines the interval in milliseconds in which batman
-                sends its protocol messages.
-
-What:           /sys/class/net/<mesh_iface>/mesh/routing_algo
-Date:           Dec 2011
-Contact:        Marek Lindner <mareklindner@neomailbox.ch>
-Description:
-                Defines the routing procotol this mesh instance
-                uses to find the optimal paths through the mesh.