Merge tag 'media/v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - New sensor driver: imx219

 - Support for some new pixelformats

 - Support for Sun8i SoC

 - Added more codecs to meson vdec driver

 - Prepare for removing the legacy usbvision driver by moving it to
   staging. This driver has issues and use legacy core APIs. If nobody
   steps up to address those, it is time for its retirement.

 - Several cleanups and improvements on drivers, with the addition of
   new supported boards

* tag 'media/v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (236 commits)
  media: venus: firmware: Ignore secure call error on first resume
  media: mtk-vpu: load vpu firmware from the new location
  media: i2c: video-i2c: fix build errors due to 'imply hwmon'
  media: MAINTAINERS: add myself to co-maintain Hantro G1/G2 for i.MX8MQ
  media: hantro: add initial i.MX8MQ support
  media: dt-bindings: Document i.MX8MQ VPU bindings
  media: vivid: fix incorrect PA assignment to HDMI outputs
  media: hantro: Add linux-rockchip mailing list to MAINTAINERS
  media: cedrus: h264: Fix 4K decoding on H6
  media: siano: Use scnprintf() for avoiding potential buffer overflow
  media: rc: Use scnprintf() for avoiding potential buffer overflow
  media: allegro: create new struct for channel parameters
  media: allegro: move mail definitions to separate file
  media: allegro: pass buffers through firmware
  media: allegro: verify source and destination buffer in VCU response
  media: allegro: handle dependency of bitrate and bitrate_peak
  media: allegro: read bitrate mode directly from control
  media: allegro: make QP configurable
  media: allegro: make frame rate configurable
  media: allegro: skip filler data if possible
  ...

1 files changed, 0 insertions, 120 deletions

diff --git a/Documentation/devicetree/bindings/media/qcom,venus.txt b/Documentation/devicetree/bindings/media/qcom,venus.txt
deleted file mode 100644
index b602c4c025e7..000000000000
--- a/Documentation/devicetree/bindings/media/qcom,venus.txt
+++ /dev/null
@@ -1,120 +0,0 @@
-* Qualcomm Venus video encoder/decoder accelerators
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: Value should contain one of:
-		- "qcom,msm8916-venus"
-		- "qcom,msm8996-venus"
-		- "qcom,sdm845-venus"
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: Register base address and length of the register map.
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: Should contain interrupt line number.
-- clocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: A List of phandle and clock specifier pairs as listed
-		    in clock-names property.
-- clock-names:
-	Usage: required for msm8916
-	Value type: <stringlist>
-	Definition: Should contain the following entries:
-		- "core"	Core video accelerator clock
-		- "iface"	Video accelerator AHB clock
-		- "bus"		Video accelerator AXI clock
-- clock-names:
-	Usage: required for msm8996
-	Value type: <stringlist>
-	Definition: Should contain the following entries:
-		- "core"	Core video accelerator clock
-		- "iface"	Video accelerator AHB clock
-		- "bus"		Video accelerator AXI clock
-		- "mbus"	Video MAXI clock
-- power-domains:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: A phandle and power domain specifier pairs to the
-		    power domain which is responsible for collapsing
-		    and restoring power to the peripheral.
-- iommus:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: A list of phandle and IOMMU specifier pairs.
-- memory-region:
-	Usage: required
-	Value type: <phandle>
-	Definition: reference to the reserved-memory for the firmware
-		    memory region.
-
-* Subnodes
-The Venus video-codec node must contain two subnodes representing
-video-decoder and video-encoder, and one optional firmware subnode.
-Firmware subnode is needed when the platform does not have TrustZone.
-
-Every of video-encoder or video-decoder subnode should have:
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: Value should contain "venus-decoder" or "venus-encoder"
-- clocks:
-	Usage: required for msm8996
-	Value type: <prop-encoded-array>
-	Definition: A List of phandle and clock specifier pairs as listed
-		    in clock-names property.
-- clock-names:
-	Usage: required for msm8996
-	Value type: <stringlist>
-	Definition: Should contain the following entries:
-		- "core"	Subcore video accelerator clock
-
-- power-domains:
-	Usage: required for msm8996
-	Value type: <prop-encoded-array>
-	Definition: A phandle and power domain specifier pairs to the
-		    power domain which is responsible for collapsing
-		    and restoring power to the subcore.
-
-The firmware subnode must have:
-
-- iommus:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: A list of phandle and IOMMU specifier pairs.
-
-* An Example
-	video-codec@1d00000 {
-		compatible = "qcom,msm8916-venus";
-		reg = <0x01d00000 0xff000>;
-		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>,
-			 <&gcc GCC_VENUS0_AHB_CLK>,
-			 <&gcc GCC_VENUS0_AXI_CLK>;
-		clock-names = "core", "iface", "bus";
-		power-domains = <&gcc VENUS_GDSC>;
-		iommus = <&apps_iommu 5>;
-		memory-region = <&venus_mem>;
-
-		video-decoder {
-			compatible = "venus-decoder";
-			clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
-			clock-names = "core";
-			power-domains = <&mmcc VENUS_CORE0_GDSC>;
-		};
-
-		video-encoder {
-			compatible = "venus-encoder";
-			clocks = <&mmcc VIDEO_SUBCORE1_CLK>;
-			clock-names = "core";
-			power-domains = <&mmcc VENUS_CORE1_GDSC>;
-		};
-
-		video-firmware {
-			iommus = <&apps_iommu 0x10b2 0x0>;
-		};
-	};