Merge tag 'mfd-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add support for  Renesas RZ/G2L MTU3

  New Device Support:
   - Add support for Lenovo Yoga Book X90F to Intel CHT WC
   - Add support for MAX5970 and MAX5978 to Simple MFD (I2C)
   - Add support for Meteor Lake PCH-S LPSS PCI to Intel LPSS PCI
   - Add support for AXP15060 PMIC to X-Powers PMIC collection

  Remove Device Support:
   - Remove support for Samsung 5M8751 and S5M8763 PMIC devices

  New Functionality:
   - Convert deprecated QCOM IRQ Chip to config registers
   - Add support for 32-bit address spaces to Renesas SMUs

  Fix-ups:
   - Make use of APIs / MACROs designed to simplify and demystify
   - Add / improve Device Tree bindings
   - Memory saving struct layout optimisations
   - Remove old / deprecated functionality
   - Factor out unassigned register addresses from ranges
   - Trivial: Spelling fixes, renames and coding style fixes
   - Rid 'defined but not used' warnings
   - Remove ineffective casts and pointer stubs

  Bug Fixes:
   - Fix incorrectly non-inverted mask/unmask IRQs on QCOM platforms
   - Remove MODULE_*() helpers from non-tristate drivers
   - Do not attempt to use out-of-range memory addresses associated with io_base
   - Provide missing export helpers
   - Fix remap bulk read optimisation fallout
   - Fix memory leak issues in error paths"

* tag 'mfd-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (88 commits)
  dt-bindings: mfd: ti,j721e-system-controller: Add SoC chip ID
  leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver
  dt-bindings: mfd: qcom,spmi-pmic: Document flash LED controller
  dt-bindings: mfd: x-powers,axp152: Document the AXP15060 variant
  mfd: axp20x: Add support for AXP15060 PMIC
  dt-bindings: mfd: x-powers,axp152: Document the AXP313a variant
  counter: rz-mtu3-cnt: Unlock on error in rz_mtu3_count_ceiling_write()
  dt-bindings: mfd: dlg,da9063: Document voltage monitoring
  dt-bindings: mfd: stm32: Remove unnecessary blank lines
  dt-bindings: mfd: qcom,spmi-pmic: Use generic ADC node name in examples
  dt-bindings: mfd: syscon: Add nuvoton,ma35d1-sys compatible
  MAINTAINERS: Add entries for Renesas RZ/G2L MTU3a counter driver
  counter: Add Renesas RZ/G2L MTU3a counter driver
  Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
  mfd: Add Renesas RZ/G2L MTU3a core driver
  dt-bindings: timer: Document RZ/G2L MTU3a bindings
  mfd: rsmu_i2c: Convert to i2c's .probe_new() again
  mfd: intel-lpss: Add Intel Meteor Lake PCH-S LPSS PCI IDs
  mfd: dln2: Fix memory leak in dln2_probe()
  mfd: axp20x: Fix axp288 writable-ranges
  ...

16 files changed, 275 insertions, 37 deletions

diff --git a/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml
index e2046f07a40e..8459d3642205 100644
--- a/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml
@@ -36,7 +36,7 @@ properties:
   clock-controller:
     # Child node
     type: object
-    $ref: "../clock/canaan,k210-clk.yaml"
+    $ref: ../clock/canaan,k210-clk.yaml
     description:
       Clock controller for the SoC clocks. This child node definition
       should follow the bindings specified in
@@ -45,7 +45,7 @@ properties:
   reset-controller:
     # Child node
     type: object
-    $ref: "../reset/canaan,k210-rst.yaml"
+    $ref: ../reset/canaan,k210-rst.yaml
     description:
       Reset controller for the SoC. This child node definition
       should follow the bindings specified in
@@ -54,7 +54,7 @@ properties:
   syscon-reboot:
     # Child node
     type: object
-    $ref: "../power/reset/syscon-reboot.yaml"
+    $ref: ../power/reset/syscon-reboot.yaml
     description:
       Reboot method for the SoC. This child node definition
       should follow the bindings specified in
diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
index 8caa48f4570e..e1ca4f297c6d 100644
--- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
+++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
@@ -65,7 +65,7 @@ properties:
       ARM Cortex M4 Co-processor. Contains the name of the rpmsg
       device. Used to match the subnode to the rpmsg device announced by
       the SCP.
-    $ref: "/schemas/types.yaml#/definitions/string"
+    $ref: /schemas/types.yaml#/definitions/string
 
   spi-max-frequency: true
 
@@ -94,23 +94,23 @@ properties:
     const: 0
 
   typec:
-    $ref: "/schemas/chrome/google,cros-ec-typec.yaml#"
+    $ref: /schemas/chrome/google,cros-ec-typec.yaml#
 
   ec-pwm:
-    $ref: "/schemas/pwm/google,cros-ec-pwm.yaml#"
+    $ref: /schemas/pwm/google,cros-ec-pwm.yaml#
     deprecated: true
 
   pwm:
-    $ref: "/schemas/pwm/google,cros-ec-pwm.yaml#"
+    $ref: /schemas/pwm/google,cros-ec-pwm.yaml#
 
   kbd-led-backlight:
-    $ref: "/schemas/chrome/google,cros-kbd-led-backlight.yaml#"
+    $ref: /schemas/chrome/google,cros-kbd-led-backlight.yaml#
 
   keyboard-controller:
-    $ref: "/schemas/input/google,cros-ec-keyb.yaml#"
+    $ref: /schemas/input/google,cros-ec-keyb.yaml#
 
   proximity:
-    $ref: "/schemas/iio/proximity/google,cros-ec-mkbp-proximity.yaml#"
+    $ref: /schemas/iio/proximity/google,cros-ec-mkbp-proximity.yaml#
 
   codecs:
     type: object
@@ -126,7 +126,7 @@ properties:
     patternProperties:
       "^ec-codec@[a-f0-9]+$":
         type: object
-        $ref: "/schemas/sound/google,cros-ec-codec.yaml#"
+        $ref: /schemas/sound/google,cros-ec-codec.yaml#
 
     required:
       - "#address-cells"
@@ -151,15 +151,15 @@ properties:
 patternProperties:
   "^i2c-tunnel[0-9]*$":
     type: object
-    $ref: "/schemas/i2c/google,cros-ec-i2c-tunnel.yaml#"
+    $ref: /schemas/i2c/google,cros-ec-i2c-tunnel.yaml#
 
   "^regulator@[0-9]+$":
     type: object
-    $ref: "/schemas/regulator/google,cros-ec-regulator.yaml#"
+    $ref: /schemas/regulator/google,cros-ec-regulator.yaml#
 
   "^extcon[0-9]*$":
     type: object
-    $ref: "/schemas/extcon/extcon-usbc-cros-ec.yaml#"
+    $ref: /schemas/extcon/extcon-usbc-cros-ec.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
index 22edcb4b212f..bdff5b653453 100644
--- a/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
@@ -53,7 +53,7 @@ properties:
       '^ldo[0-9]+$':
         type: object
 
-        $ref: "/schemas/regulator/regulator.yaml#"
+        $ref: /schemas/regulator/regulator.yaml#
 
         unevaluatedProperties: false
 
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max5970.yaml b/Documentation/devicetree/bindings/mfd/maxim,max5970.yaml
new file mode 100644
index 000000000000..da67742c5aa9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/maxim,max5970.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max5970.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Regulator for MAX5970 Smart Switch from Maxim Integrated
+
+maintainers:
+  - Patrick Rudolph <patrick.rudolph@9elements.com>
+
+description: |
+  The smart switch provides no output regulation, but independent fault protection
+  and voltage and current sensing.
+  Programming is done through I2C bus.
+
+  Datasheets:
+    https://datasheets.maximintegrated.com/en/ds/MAX5970.pdf
+    https://datasheets.maximintegrated.com/en/ds/MAX5978.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max5970
+      - maxim,max5978
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  leds:
+    type: object
+    description:
+      Properties for four LEDS.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^led@[0-3]$":
+        $ref: /schemas/leds/common.yaml#
+        type: object
+
+    additionalProperties: false
+
+  vss1-supply:
+    description: Supply of the first channel.
+
+  vss2-supply:
+    description: Supply of the second channel.
+
+  regulators:
+    type: object
+    description:
+      Properties for both hot swap control/switch.
+
+    patternProperties:
+      "^sw[0-1]$":
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+        properties:
+          shunt-resistor-micro-ohms:
+            description: |
+              The value of current sense resistor in microohms.
+
+        required:
+          - shunt-resistor-micro-ohms
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+  - vss1-supply
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - maxim,max5970
+    then:
+      required:
+        - vss2-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        regulator@3a {
+            compatible = "maxim,max5978";
+            reg = <0x3a>;
+            vss1-supply = <&p3v3>;
+
+            regulators {
+                sw0_ref_0: sw0 {
+                    shunt-resistor-micro-ohms = <12000>;
+                };
+            };
+
+            leds {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                led@0 {
+                    reg = <0>;
+                    label = "led0";
+                    default-state = "on";
+                };
+                led@1 {
+                    reg = <1>;
+                    label = "led1";
+                    default-state = "on";
+                };
+            };
+        };
+    };
+
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@3a {
+            compatible = "maxim,max5970";
+            reg = <0x3a>;
+            vss1-supply = <&p3v3>;
+            vss2-supply = <&p5v>;
+
+            regulators {
+                sw0_ref_1: sw0 {
+                    shunt-resistor-micro-ohms = <12000>;
+                };
+                sw1_ref_1: sw1 {
+                    shunt-resistor-micro-ohms = <10000>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
index adf88245c409..36de335a33aa 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
@@ -33,6 +33,7 @@ properties:
   compatible:
     items:
       - enum:
+          - qcom,pm2250
           - qcom,pm6125
           - qcom,pm6150
           - qcom,pm6150l
@@ -78,6 +79,7 @@ properties:
           - qcom,pmk8350
           - qcom,pmk8550
           - qcom,pmm8155au
+          - qcom,pmm8654au
           - qcom,pmp8074
           - qcom,pmr735a
           - qcom,pmr735b
@@ -115,6 +117,7 @@ patternProperties:
     type: object
     oneOf:
       - $ref: /schemas/iio/adc/qcom,spmi-iadc.yaml#
+      - $ref: /schemas/iio/adc/qcom,spmi-rradc.yaml#
       - $ref: /schemas/iio/adc/qcom,spmi-vadc.yaml#
 
   "^adc-tm@[0-9a-f]+$":
@@ -135,6 +138,14 @@ patternProperties:
     type: object
     $ref: /schemas/pinctrl/qcom,pmic-gpio.yaml#
 
+  "^led-controller@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/leds/qcom,spmi-flash-led.yaml#
+
+  "^nvram@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/nvmem/qcom,spmi-sdam.yaml#
+
   "pon@[0-9a-f]+$":
     type: object
     $ref: /schemas/power/reset/qcom,pon.yaml#
@@ -276,12 +287,12 @@ examples:
             #size-cells = <0>;
             #io-channel-cells = <1>;
 
-            adc-chan@6 {
+            channel@6 {
                 reg = <ADC5_DIE_TEMP>;
                 label = "die_temp";
             };
 
-            adc-chan@4f {
+            channel@4f {
                 reg = <ADC5_AMUX_THM3_100K_PU>;
                 qcom,ratiometric;
                 qcom,hw-settle-time = <200>;
diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
index 2eeebe920e6e..fe790af7b4fb 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
@@ -25,12 +25,16 @@ properties:
           - qcom,sc8280xp-tcsr
           - qcom,sdm630-tcsr
           - qcom,sdm845-tcsr
+          - qcom,sdx55-tcsr
+          - qcom,sdx65-tcsr
           - qcom,sm8150-tcsr
+          - qcom,sm8450-tcsr
           - qcom,tcsr-apq8064
           - qcom,tcsr-apq8084
           - qcom,tcsr-ipq5332
           - qcom,tcsr-ipq6018
           - qcom,tcsr-ipq8064
+          - qcom,tcsr-ipq9574
           - qcom,tcsr-mdm9615
           - qcom,tcsr-msm8226
           - qcom,tcsr-msm8660
diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
index 9acad9d326eb..9c51c1b19067 100644
--- a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
@@ -49,7 +49,7 @@ patternProperties:
 
   "rtc@[0-9a-f]+$":
     type: object
-    $ref: "../rtc/qcom-pm8xxx-rtc.yaml"
+    $ref: ../rtc/qcom-pm8xxx-rtc.yaml
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
index d6d120a78094..05747e012516 100644
--- a/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
@@ -46,7 +46,7 @@ properties:
 
   rohm,clkout-open-drain:
     description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos".
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 1
 
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
index ec3adcd3483d..11089aa89ec6 100644
--- a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
@@ -46,7 +46,7 @@ properties:
 
   rohm,clkout-open-drain:
     description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos".
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 1
 
diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml
index c828c4f5e4a7..8103154bbb52 100644
--- a/Documentation/devicetree/bindings/mfd/syscon.yaml
+++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
@@ -56,6 +56,7 @@ properties:
               - microchip,lan966x-cpu-syscon
               - microchip,sparx5-cpu-syscon
               - mstar,msc313-pmsleep
+              - nuvoton,ma35d1-sys
               - nuvoton,wpcm450-shm
               - rockchip,px30-qos
               - rockchip,rk3036-qos
@@ -67,6 +68,7 @@ properties:
               - rockchip,rk3568-qos
               - rockchip,rk3588-qos
               - rockchip,rv1126-qos
+              - starfive,jh7100-sysmain
 
           - const: syscon
 
diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
index 76ef4352e13c..0c98d913747b 100644
--- a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
+++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
@@ -62,6 +62,12 @@ patternProperties:
     description:
       The phy node corresponding to the ethernet MAC.
 
+  "^chipid@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/hwinfo/ti,k3-socinfo.yaml#
+    description:
+      The node corresponding to SoC chip identification.
+
 required:
   - compatible
   - reg
@@ -99,5 +105,10 @@ examples:
             reg = <0x4140 0x18>;
             #clock-cells = <1>;
         };
+
+        chipid@14 {
+            compatible = "ti,am654-chipid";
+            reg = <0x14 0x4>;
+        };
     };
 ...
diff --git a/Documentation/devicetree/bindings/mfd/ti,nspire-misc.yaml b/Documentation/devicetree/bindings/mfd/ti,nspire-misc.yaml
new file mode 100644
index 000000000000..28cd5164d46f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,nspire-misc.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,nspire-misc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI Nspire MISC hardware block
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+description:
+  System controller node represents a register region containing a set
+  of miscellaneous registers. The registers are not cohesive enough to
+  represent as any specific type of device. Currently there is a reset
+  controller.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - ti,nspire-misc
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  reboot:
+    $ref: /schemas/power/reset/syscon-reboot.yaml#
+
+required:
+  - compatible
+  - reg
+  - reboot
+
+additionalProperties: false
+
+examples:
+  - |
+    misc: misc@900a0000 {
+      compatible = "ti,nspire-misc", "syscon", "simple-mfd";
+      reg = <0x900a0000 0x1000>;
+
+      reboot {
+        compatible = "syscon-reboot";
+        offset = <0x08>;
+        value = <0x02>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml
index ea3337dafaf5..7902f3c5d289 100644
--- a/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml
+++ b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml
@@ -156,7 +156,7 @@ properties:
       entry has a value that is out of range for a 16 bit register then the
       chip default will be used. If present exactly five values must be
       specified.
-    $ref: "/schemas/types.yaml#/definitions/uint32-array"
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 1
     maxItems: 5
 
diff --git a/Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml b/Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml
index 309606d2d806..f3d8394b27e7 100644
--- a/Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml
+++ b/Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/mfd/x-powers,ac100.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/mfd/x-powers,ac100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: X-Powers AC100
 
diff --git a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
index 24d03996b93a..f7f0f2c0421a 100644
--- a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
+++ b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
@@ -47,9 +47,8 @@ allOf:
               - x-powers,axp209
 
     then:
-      not:
-        required:
-          - x-powers,drive-vbus-en
+      properties:
+        x-powers,drive-vbus-en: false
 
   - if:
       not:
@@ -59,14 +58,9 @@ allOf:
               const: x-powers,axp806
 
     then:
-      allOf:
-        - not:
-            required:
-              - x-powers,self-working-mode
-
-        - not:
-            required:
-              - x-powers,master-mode
+      properties:
+        x-powers,self-working-mode: false
+        x-powers,master-mode: false
 
   - if:
       not:
@@ -79,6 +73,18 @@ allOf:
       required:
         - interrupts
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - x-powers,axp313a
+              - x-powers,axp15060
+
+    then:
+      properties:
+        x-powers,dcdc-freq: false
+
 properties:
   compatible:
     oneOf:
@@ -88,10 +94,12 @@ properties:
           - x-powers,axp209
           - x-powers,axp221
           - x-powers,axp223
+          - x-powers,axp313a
           - x-powers,axp803
           - x-powers,axp806
           - x-powers,axp809
           - x-powers,axp813
+          - x-powers,axp15060
       - items:
           - const: x-powers,axp228
           - const: x-powers,axp221
@@ -260,7 +268,7 @@ properties:
           Defines the work frequency of DC-DC in kHz.
 
     patternProperties:
-      "^(([a-f])?ldo[0-9]|dcdc[0-7a-e]|ldo(_|-)io(0|1)|(dc1)?sw|rtc(_|-)ldo|drivevbus|dc5ldo)$":
+      "^(([a-f])?ldo[0-9]|dcdc[0-7a-e]|ldo(_|-)io(0|1)|(dc1)?sw|rtc(_|-)ldo|cpusldo|drivevbus|dc5ldo)$":
         $ref: /schemas/regulator/regulator.yaml#
         type: object
         unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml b/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml
index 9efd49c39bd2..6e880a46d7ee 100644
--- a/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml
+++ b/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml
@@ -2,8 +2,8 @@
 # Copyright 2019 Bootlin
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/mfd/xylon,logicvc.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/mfd/xylon,logicvc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Xylon LogiCVC multi-function device