ARM: s3c: remove all s3c24xx support

The platform was deprecated in commit 6a5e69c7ddea ("ARM: s3c: mark
as deprecated and schedule removal") and can be removed. This includes
all files that are exclusively for s3c24xx and not shared with s3c64xx,
as well as the glue logic in Kconfig and the maintainer file entries.

Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Christer Weinigel <christer@weinigel.se>
Cc: Guillaume GOURAT <guillaume.gourat@nexvision.tv>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Simtec Linux Team <linux@simtec.co.uk>
Cc: openmoko-kernel@lists.openmoko.org
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 0 insertions, 42 deletions

diff --git a/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
deleted file mode 100644
index 5f68feb9f9d6..000000000000
--- a/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-* Samsung's S3C24XX MMC/SD/SDIO controller device tree bindings
-
-Samsung's S3C24XX MMC/SD/SDIO controller is used as a connectivity interface
-with external MMC, SD and SDIO storage mediums.
-
-This file documents differences between the core mmc properties described by
-mmc.txt and the properties used by the Samsung S3C24XX MMC/SD/SDIO controller
-implementation.
-
-Required SoC Specific Properties:
-- compatible: should be one of the following
-  - "samsung,s3c2410-sdi": for controllers compatible with s3c2410
-  - "samsung,s3c2412-sdi": for controllers compatible with s3c2412
-  - "samsung,s3c2440-sdi": for controllers compatible with s3c2440
-- reg: register location and length
-- interrupts: mmc controller interrupt
-- clocks: Should reference the controller clock
-- clock-names: Should contain "sdi"
-
-Required Board Specific Properties:
-- pinctrl-0: Should specify pin control groups used for this controller.
-- pinctrl-names: Should contain only one value - "default".
-
-Optional Properties:
-- bus-width: number of data lines (see mmc.txt)
-- cd-gpios: gpio for card detection (see mmc.txt)
-- wp-gpios: gpio for write protection (see mmc.txt)
-
-Example:
-
-	mmc0: mmc@5a000000 {
-		compatible = "samsung,s3c2440-sdi";
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdi_pins>;
-		reg = <0x5a000000 0x100000>;
-		interrupts = <0 0 21 3>;
-		clocks = <&clocks PCLK_SDI>;
-		clock-names = "sdi";
-		bus-width = <4>;
-		cd-gpios = <&gpg 8 GPIO_ACTIVE_LOW>;
-		wp-gpios = <&gph 8 GPIO_ACTIVE_LOW>;
-	};