Merge tag 'pinctrl-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "Nothing special, notably a lot of new Qualcomm hardware is supported,
  a RISC-V reference SoC and then some cleanups both in code and device
  tree bindings.

  Core changes:

   - Add PINCTRL_PINFUNCTION() macro and use it in several drivers

  New drivers:

   - New driver for the StarFive JH7110 SoC "sys" and "aon" (always-on)
     pin controllers. (RISC-V.)

   - New subdriver for the Qualcomm QDU1000/QRU1000 SoC pin controller

   - New subdrivers for the Qualcomm SM8550 SoC and LPASS pin
     controllers

   - New subdriver for the Qualcomm SA8775P SoC pin controller

   - New subdriver for the Qualcomm IPQ5332 SoC pin controller

   - New (trivial) support for Qualcomm PM8550 and PMR735D PMIC pin
     control

   - New subdriver for the Mediatek MT7981 SoC pin controller

  Improvements:

   - Several cleanups and refactorings to the Intel drivers

   - Add 4KOhm bias support to the Intel driver

   - Use the NOIRQ_SYSTEM_SLEEP_PM_OPS for the AT91 driver

   - Support general purpose clocks in the Qualcomm MSM8226 SoC

   - Several conversions to use the new I2C .probe_new() call

   - Massive clean-up of the Qualcomm Device Tree YAML schemas

   - Add VIN[45] pins, groups and functions to the Renesas r8a77950 SoC
     driver"

* tag 'pinctrl-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (118 commits)
  pinctrl: qcom: Add support for i2c specific pull feature
  pinctrl: starfive: Add StarFive JH7110 aon controller driver
  pinctrl: starfive: Add StarFive JH7110 sys controller driver
  dt-bindings: pinctrl: Add StarFive JH7110 aon pinctrl
  dt-bindings: pinctrl: Add StarFive JH7110 sys pinctrl
  pinctrl: add mt7981 pinctrl driver
  dt-bindings: pinctrl: add bindings for MT7981 SoC
  dt-bindings: pinctrl: rockchip,pinctrl: mark gpio sub nodes of pinctrl as deprecated
  pinctrl: qcom: Introduce IPQ5332 TLMM driver
  dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl
  dt-bindings: pinctrl: qcom: lpass-lpi: correct GPIO name pattern
  pinctrl: qcom: pinctrl-sm8550-lpass-lpi: add SM8550 LPASS
  dt-bindings: pinctrl: qcom,sm8550-lpass-lpi-pinctrl: add SM8550 LPASS
  pinctrl: at91: use devm_kasprintf() to avoid potential leaks
  dt-bindings: pinctrl: qcom: correct gpio-ranges in examples
  dt-bindings: pinctrl: qcom,msm8994: correct number of GPIOs
  dt-bindings: pinctrl: qcom,sdx55: correct GPIO name pattern
  dt-bindings: pinctrl: qcom,msm8953: correct GPIO name pattern
  dt-bindings: pinctrl: qcom,sm6375: correct GPIO name pattern and example
  dt-bindings: pinctrl: qcom,msm8909: correct GPIO name pattern and example
  ...

1 files changed, 0 insertions, 84 deletions

diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml
deleted file mode 100644
index b1cdbb56d4e4..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml
+++ /dev/null
@@ -1,84 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mn-pinctrl.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Freescale IMX8MN IOMUX Controller
-
-maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
-
-description:
-  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
-  for common binding part and usage.
-
-properties:
-  compatible:
-    const: fsl,imx8mn-iomuxc
-
-  reg:
-    maxItems: 1
-
-# Client device subnode's properties
-patternProperties:
-  'grp$':
-    type: object
-    description:
-      Pinctrl node's client devices use subnodes for desired pin configuration.
-      Client device subnodes use below standard properties.
-
-    properties:
-      fsl,pins:
-        description:
-          each entry consists of 6 integers and represents the mux and config
-          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
-          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
-          be found in <arch/arm64/boot/dts/freescale/imx8mn-pinfunc.h>. The last
-          integer CONFIG is the pad setting value like pull-up on this pin. Please
-          refer to i.MX8M Nano Reference Manual for detailed CONFIG settings.
-        $ref: /schemas/types.yaml#/definitions/uint32-matrix
-        items:
-          items:
-            - description: |
-                "mux_reg" indicates the offset of mux register.
-            - description: |
-                "conf_reg" indicates the offset of pad configuration register.
-            - description: |
-                "input_reg" indicates the offset of select input register.
-            - description: |
-                "mux_val" indicates the mux value to be applied.
-            - description: |
-                "input_val" indicates the select input value to be applied.
-            - description: |
-                "pad_setting" indicates the pad configuration value to be applied.
-
-    required:
-      - fsl,pins
-
-    additionalProperties: false
-
-allOf:
-  - $ref: "pinctrl.yaml#"
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
-
-examples:
-  # Pinmux controller node
-  - |
-    iomuxc: pinctrl@30330000 {
-        compatible = "fsl,imx8mn-iomuxc";
-        reg = <0x30330000 0x10000>;
-
-        pinctrl_uart2: uart2grp {
-            fsl,pins =
-                <0x23C 0x4A4 0x4FC 0x0 0x0	0x140>,
-                <0x240 0x4A8 0x000 0x0 0x0	0x140>;
-        };
-    };
-
-...