diff options
author | Arnd Bergmann <arnd@arndb.de> | 2019-02-15 18:00:42 +0100 |
---|---|---|
committer | Arnd Bergmann <arnd@arndb.de> | 2019-02-15 18:01:17 +0100 |
commit | 187b4ac7dfeb74cf6e6043f82aeab4ddc2a4c44a (patch) | |
tree | d1a3e4b49183d0bd2841a9d45463f79bbbe5fe6b /Documentation/devicetree | |
parent | 405bcfff172db863b7c4b63e0e0ef8508966c90a (diff) | |
parent | 50de64947f40f869dc5b9306891b750f317135ef (diff) |
Merge tag 'arm-soc/for-5.1/drivers' of https://github.com/Broadcom/stblinux into arm/drivers
This pull request contains Broadcom ARM/ARM64/MIPS based SoCs changes
for 5.1, please pull the following:
- Stefan updates the BCM2835 SoC driver with downstream properties and
uses that to implement a reboot notifier to tell the VC4 firmware when
Linux on the ARM CPU is rebooting
- Eric adds a proper power domain driver for the BCM283x SoCs and
updates a bunch of drivers to have a better and clearer Device Tree
definition to support power domains/breaking up of functionality. This
requires converting the existing watchdog driver into a MFD and then
breaking up the functionality into separate drivers and finally
updating the DTS files to leverage the power domains information.
- Wei provides a fix for making a symbol static
* tag 'arm-soc/for-5.1/drivers' of https://github.com/Broadcom/stblinux:
ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware.
ARM: bcm283x: Extend the WDT DT node out to cover the whole PM block. (v4)
soc: bcm: bcm2835-pm: Make local symbol static
soc: bcm: Make PM driver default for BCM2835
soc: bcm: bcm2835-pm: Add support for power domains under a new binding.
bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD.
dt-bindings: soc: Add a new binding for the BCM2835 PM node. (v4)
firmware: raspberrypi: notify VC4 firmware of a reboot
soc: bcm2835: sync firmware properties with downstream
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r-- | Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt | 46 |
1 files changed, 46 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt new file mode 100644 index 000000000000..3b7d32956391 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt @@ -0,0 +1,46 @@ +BCM2835 PM (Power domains, watchdog) + +The PM block controls power domains and some reset lines, and includes +a watchdog timer. This binding supersedes the brcm,bcm2835-pm-wdt +binding which covered some of PM's register range and functionality. + +Required properties: + +- compatible: Should be "brcm,bcm2835-pm" +- reg: Specifies base physical address and size of the two + register ranges ("PM" and "ASYNC_BRIDGE" in that + order) +- clocks: a) v3d: The V3D clock from CPRMAN + b) peri_image: The PERI_IMAGE clock from CPRMAN + c) h264: The H264 clock from CPRMAN + d) isp: The ISP clock from CPRMAN +- #reset-cells: Should be 1. This property follows the reset controller + bindings[1]. +- #power-domain-cells: Should be 1. This property follows the power domain + bindings[2]. + +Optional properties: + +- timeout-sec: Contains the watchdog timeout in seconds +- system-power-controller: Whether the watchdog is controlling the + system power. This node follows the power controller bindings[3]. + +[1] Documentation/devicetree/bindings/reset/reset.txt +[2] Documentation/devicetree/bindings/power/power_domain.txt +[3] Documentation/devicetree/bindings/power/power-controller.txt + +Example: + +pm { + compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; + #power-domain-cells = <1>; + #reset-cells = <1>; + reg = <0x7e100000 0x114>, + <0x7e00a000 0x24>; + clocks = <&clocks BCM2835_CLOCK_V3D>, + <&clocks BCM2835_CLOCK_PERI_IMAGE>, + <&clocks BCM2835_CLOCK_H264>, + <&clocks BCM2835_CLOCK_ISP>; + clock-names = "v3d", "peri_image", "h264", "isp"; + system-power-controller; +}; |