Merge drm/drm-next into drm-misc-next

Backmerging drm-next into drm-misc-next for nouveau and panel updates.
Resolves a conflict between ttm and nouveau, where struct ttm_mem_res got
renamed to struct ttm_resource.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

33 files changed, 366 insertions, 54 deletions

diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile
index a63898954068..91c4d00e96d3 100644
--- a/Documentation/devicetree/bindings/Makefile
+++ b/Documentation/devicetree/bindings/Makefile
@@ -2,7 +2,6 @@
 DT_DOC_CHECKER ?= dt-doc-validate
 DT_EXTRACT_EX ?= dt-extract-example
 DT_MK_SCHEMA ?= dt-mk-schema
-DT_MK_SCHEMA_USERONLY_FLAG := $(if $(DT_SCHEMA_FILES), -u)
 
 DT_SCHEMA_MIN_VERSION = 2020.5
 
@@ -35,21 +34,40 @@ quiet_cmd_mk_schema = SCHEMA  $@
 
 DT_DOCS = $(shell $(find_cmd) | sed -e 's|^$(srctree)/||')
 
-DT_SCHEMA_FILES ?= $(DT_DOCS)
-
-extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES))
-extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES))
-extra-$(CHECK_DT_BINDING) += processed-schema-examples.yaml
-
 override DTC_FLAGS := \
 	-Wno-avoid_unnecessary_addr_size \
-	-Wno-graph_child_address
+	-Wno-graph_child_address \
+	-Wno-interrupt_provider
 
 $(obj)/processed-schema-examples.yaml: $(DT_DOCS) check_dtschema_version FORCE
 	$(call if_changed,mk_schema)
 
-$(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := $(DT_MK_SCHEMA_USERONLY_FLAG)
+ifeq ($(DT_SCHEMA_FILES),)
+
+# Unless DT_SCHEMA_FILES is specified, use the full schema for dtbs_check too.
+# Just copy processed-schema-examples.yaml
+
+$(obj)/processed-schema.yaml: $(obj)/processed-schema-examples.yaml FORCE
+	$(call if_changed,copy)
+
+DT_SCHEMA_FILES = $(DT_DOCS)
+
+else
+
+# If DT_SCHEMA_FILES is specified, use it for processed-schema.yaml
+
+$(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := -u
 $(obj)/processed-schema.yaml: $(DT_SCHEMA_FILES) check_dtschema_version FORCE
 	$(call if_changed,mk_schema)
 
-extra-y += processed-schema.yaml
+endif
+
+extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES))
+extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES))
+extra-$(CHECK_DT_BINDING) += processed-schema-examples.yaml
+extra-$(CHECK_DTBS) += processed-schema.yaml
+
+# Hack: avoid 'Argument list too long' error for 'make clean'. Remove most of
+# build artifacts here before they are processed by scripts/Makefile.clean
+clean-files = $(shell find $(obj) \( -name '*.example.dts' -o \
+			-name '*.example.dt.yaml' \) -delete 2>/dev/null)
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
index 715047444391..10b8459e49f8 100644
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
@@ -47,7 +47,7 @@ Required properties:
 			  &lsio_mu1 1 2
 			  &lsio_mu1 1 3
 			  &lsio_mu1 3 3>;
-		See Documentation/devicetree/bindings/mailbox/fsl,mu.txt
+		See Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
 		for detailed mailbox binding.
 
 Note: Each mu which supports general interrupt should have an alias correctly
diff --git a/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml
index c4c9119e4a20..a0c6c5d2b70f 100644
--- a/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml
+++ b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml
@@ -80,14 +80,14 @@ examples:
         ranges = <1 0x00000000 0x42000000 0x02000000>,
                  <5 0x00000000 0x46000000 0x01000000>;
 
-        ethernet@1,01f00000 {
+        ethernet@1,1f00000 {
             compatible = "smsc,lan9115";
             reg = <1 0x01f00000 0x1000>;
             interrupts = <0 48 4>;
             phy-mode = "mii";
         };
 
-        uart@5,00200000 {
+        serial@5,200000 {
             compatible = "ns16550a";
             reg = <5 0x00200000 0x20>;
             interrupts = <0 49 4>;
diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.yaml b/Documentation/devicetree/bindings/clock/imx27-clock.yaml
index b5f3ed084ea0..a75365453dbc 100644
--- a/Documentation/devicetree/bindings/clock/imx27-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx27-clock.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Clock bindings for Freescale i.MX27
 
 maintainers:
-  - Fabio Estevam <fabio.estevam@freescale.com>
+  - Fabio Estevam <fabio.estevam@nxp.com>
 
 description: |
   The clock consumer should specify the desired clock by having the clock
diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.yaml b/Documentation/devicetree/bindings/clock/imx31-clock.yaml
index 1b6f75d3928a..a25a374b3b2a 100644
--- a/Documentation/devicetree/bindings/clock/imx31-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx31-clock.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Clock bindings for Freescale i.MX31
 
 maintainers:
-  - Fabio Estevam <fabio.estevam@freescale.com>
+  - Fabio Estevam <fabio.estevam@nxp.com>
 
 description: |
   The clock consumer should specify the desired clock by having the clock
diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.yaml b/Documentation/devicetree/bindings/clock/imx5-clock.yaml
index f5c2b3d7a910..4d9e7c73dce9 100644
--- a/Documentation/devicetree/bindings/clock/imx5-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx5-clock.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Clock bindings for Freescale i.MX5
 
 maintainers:
-  - Fabio Estevam <fabio.estevam@freescale.com>
+  - Fabio Estevam <fabio.estevam@nxp.com>
 
 description: |
   The clock consumer should specify the desired clock by having the clock
diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
index 6e14e087c0d0..0d1db3f9da84 100644
--- a/Documentation/devicetree/bindings/display/bridge/sii902x.txt
+++ b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
@@ -37,7 +37,7 @@ Optional properties:
 	simple-card or audio-graph-card binding. See their binding
 	documents on how to describe the way the sii902x device is
 	connected to the rest of the audio system:
-	Documentation/devicetree/bindings/sound/simple-card.txt
+	Documentation/devicetree/bindings/sound/simple-card.yaml
 	Documentation/devicetree/bindings/sound/audio-graph-card.txt
 	Note: In case of the audio-graph-card binding the used port
 	index should be 3.
diff --git a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
index 5bf77f6dd19d..5a99490c17b9 100644
--- a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
+++ b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
@@ -68,7 +68,7 @@ Required properties:
   datasheet
 - clocks : phandle to the PRE axi clock input, as described
   in Documentation/devicetree/bindings/clock/clock-bindings.txt and
-  Documentation/devicetree/bindings/clock/imx6q-clock.txt.
+  Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
 - clock-names: should be "axi"
 - interrupts: should contain the PRE interrupt
 - fsl,iram: phandle pointing to the mmio-sram device node, that should be
@@ -94,7 +94,7 @@ Required properties:
   datasheet
 - clocks : phandles to the PRG ipg and axi clock inputs, as described
   in Documentation/devicetree/bindings/clock/clock-bindings.txt and
-  Documentation/devicetree/bindings/clock/imx6q-clock.txt.
+  Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
 - clock-names: should be "ipg" and "axi"
 - fsl,pres: phandles to the PRE units attached to this PRG, with the fixed
   PRE as the first entry and the muxable PREs following.
diff --git a/Documentation/devicetree/bindings/display/imx/ldb.txt b/Documentation/devicetree/bindings/display/imx/ldb.txt
index 38c637fa39dd..8e6e7d797943 100644
--- a/Documentation/devicetree/bindings/display/imx/ldb.txt
+++ b/Documentation/devicetree/bindings/display/imx/ldb.txt
@@ -30,8 +30,8 @@ Required properties:
                 "di2_sel" - IPU2 DI0 mux
                 "di3_sel" - IPU2 DI1 mux
         The needed clock numbers for each are documented in
-        Documentation/devicetree/bindings/clock/imx5-clock.txt, and in
-        Documentation/devicetree/bindings/clock/imx6q-clock.txt.
+        Documentation/devicetree/bindings/clock/imx5-clock.yaml, and in
+        Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
 
 Optional properties:
  - pinctrl-names : should be "default" on i.MX53, not used on i.MX6q
diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
index af95586c898f..7884fd7a85c1 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -87,6 +87,7 @@ Required properties:
   * "qcom,dsi-phy-20nm"
   * "qcom,dsi-phy-28nm-8960"
   * "qcom,dsi-phy-14nm"
+  * "qcom,dsi-phy-14nm-660"
   * "qcom,dsi-phy-10nm"
   * "qcom,dsi-phy-10nm-8998"
 - reg: Physical base address and length of the registers of PLL, PHY. Some
diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt
index fd779cd6994d..1af0ff102b50 100644
--- a/Documentation/devicetree/bindings/display/msm/gpu.txt
+++ b/Documentation/devicetree/bindings/display/msm/gpu.txt
@@ -112,6 +112,34 @@ Example a6xx (with GMU):
 		interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>;
 		interconnect-names = "gfx-mem";
 
+		gpu_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-430000000 {
+				opp-hz = /bits/ 64 <430000000>;
+				opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+				opp-peak-kBps = <5412000>;
+			};
+
+			opp-355000000 {
+				opp-hz = /bits/ 64 <355000000>;
+				opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				opp-peak-kBps = <3072000>;
+			};
+
+			opp-267000000 {
+				opp-hz = /bits/ 64 <267000000>;
+				opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				opp-peak-kBps = <3072000>;
+			};
+
+			opp-180000000 {
+				opp-hz = /bits/ 64 <180000000>;
+				opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				opp-peak-kBps = <1804000>;
+			};
+		};
+
 		qcom,gmu = <&gmu>;
 
 		zap-shader {
diff --git a/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml b/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml
index 41fd5713c156..be69e0cc50fc 100644
--- a/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml
+++ b/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml
@@ -33,7 +33,7 @@ additionalProperties: false
 
 examples:
   - |
-    sysreg {
+    sysreg@0 {
         compatible = "arm,versatile-sysreg", "syscon", "simple-mfd";
         reg = <0x00000 0x1000>;
 
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml
index ec8ae742d4da..7204da5eb4c5 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml
@@ -24,7 +24,7 @@ properties:
     description: |
       Should contain a list of phandles pointing to display interface port
       of vop devices. vop definitions as defined in
-      Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
+      Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml
new file mode 100644
index 000000000000..52a939cade3b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml
@@ -0,0 +1,174 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/xlnx/xlnx,zynqmp-dpsub.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx ZynqMP DisplayPort Subsystem
+
+description: |
+  The DisplayPort subsystem of Xilinx ZynqMP (Zynq UltraScale+ MPSoC)
+  implements the display and audio pipelines based on the DisplayPort v1.2
+  standard. The subsystem includes multiple functional blocks as below:
+
+               +------------------------------------------------------------+
+  +--------+   | +----------------+     +-----------+                       |
+  | DPDMA  | --->|                | --> |   Video   | Video +-------------+ |
+  | 4x vid |   | |                |     | Rendering | -+--> |             | |   +------+
+  | 2x aud |   | |  Audio/Video   | --> | Pipeline  |  |    | DisplayPort |---> | PHY0 |
+  +--------+   | | Buffer Manager |     +-----------+  |    |   Source    | |   +------+
+               | |    and STC     |     +-----------+  |    | Controller  | |   +------+
+  Live Video --->|                | --> |   Audio   | Audio |             |---> | PHY1 |
+               | |                |     |   Mixer   | --+-> |             | |   +------+
+  Live Audio --->|                | --> |           |  ||   +-------------+ |
+               | +----------------+     +-----------+  ||                   |
+               +---------------------------------------||-------------------+
+                                                       vv
+                                                 Blended Video and
+                                                 Mixed Audio to PL
+
+  The Buffer Manager interacts with external interface such as DMA engines or
+  live audio/video streams from the programmable logic. The Video Rendering
+  Pipeline blends the video and graphics layers and performs colorspace
+  conversion. The Audio Mixer mixes the incoming audio streams. The DisplayPort
+  Source Controller handles the DisplayPort protocol and connects to external
+  PHYs.
+
+  The subsystem supports 2 video and 2 audio streams, and various pixel formats
+  and depths up to 4K@30 resolution.
+
+  Please refer to "Zynq UltraScale+ Device Technical Reference Manual"
+  (https://www.xilinx.com/support/documentation/user_guides/ug1085-zynq-ultrascale-trm.pdf)
+  for more details.
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-dpsub-1.7
+
+  reg:
+    maxItems: 4
+  reg-names:
+    items:
+      - const: dp
+      - const: blend
+      - const: av_buf
+      - const: aud
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description:
+      The APB clock and at least one video clock are mandatory, the audio clock
+      is optional.
+    minItems: 2
+    maxItems: 4
+    items:
+      - description: dp_apb_clk is the APB clock
+      - description: dp_aud_clk is the Audio clock
+      - description:
+          dp_vtc_pixel_clk_in is the non-live video clock (from Processing
+          System)
+      - description:
+          dp_live_video_in_clk is the live video clock (from Programmable
+          Logic)
+  clock-names:
+    oneOf:
+      - minItems: 2
+        maxItems: 3
+        items:
+          - const: dp_apb_clk
+          - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ]
+          - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ]
+      - minItems: 3
+        maxItems: 4
+        items:
+          - const: dp_apb_clk
+          - const: dp_aud_clk
+          - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ]
+          - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ]
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    maxItems: 4
+    items:
+      - description: Video layer, plane 0 (RGB or luma)
+      - description: Video layer, plane 1 (U/V or U)
+      - description: Video layer, plane 2 (V)
+      - description: Graphics layer
+  dma-names:
+    items:
+      - const: vid0
+      - const: vid1
+      - const: vid2
+      - const: gfx0
+
+  phys:
+    description: PHYs for the DP data lanes
+    minItems: 1
+    maxItems: 2
+  phy-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: dp-phy0
+      - const: dp-phy1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - dmas
+  - dma-names
+  - phys
+  - phy-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+
+    display@fd4a0000 {
+        compatible = "xlnx,zynqmp-dpsub-1.7";
+        reg = <0x0 0xfd4a0000 0x0 0x1000>,
+              <0x0 0xfd4aa000 0x0 0x1000>,
+              <0x0 0xfd4ab000 0x0 0x1000>,
+              <0x0 0xfd4ac000 0x0 0x1000>;
+        reg-names = "dp", "blend", "av_buf", "aud";
+        interrupts = <0 119 4>;
+        interrupt-parent = <&gic>;
+
+        clock-names = "dp_apb_clk", "dp_aud_clk", "dp_live_video_in_clk";
+        clocks = <&dp_aclk>, <&clkc 17>, <&si570_1>;
+
+        power-domains = <&pd_dp>;
+        resets = <&reset ZYNQMP_RESET_DP>;
+
+        dma-names = "vid0", "vid1", "vid2", "gfx0";
+        dmas = <&xlnx_dpdma 0>,
+               <&xlnx_dpdma 1>,
+               <&xlnx_dpdma 2>,
+               <&xlnx_dpdma 3>;
+
+        phys = <&psgtr 1 PHY_TYPE_DP 0 3 27000000>,
+               <&psgtr 0 PHY_TYPE_DP 1 3 27000000>;
+
+        phy-names = "dp-phy0", "dp-phy1";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml
new file mode 100644
index 000000000000..5de510f8c88c
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/xilinx/xlnx,zynqmp-dpdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx ZynqMP DisplayPort DMA Controller Device Tree Bindings
+
+description: |
+  These bindings describe the DMA engine included in the Xilinx ZynqMP
+  DisplayPort Subsystem. The DMA engine supports up to 6 DMA channels (3
+  channels for a video stream, 1 channel for a graphics stream, and 2 channels
+  for an audio stream).
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+allOf:
+  - $ref: "../dma-controller.yaml#"
+
+properties:
+  "#dma-cells":
+    const: 1
+    description: |
+      The cell is the DMA channel ID (see dt-bindings/dma/xlnx-zynqmp-dpdma.h
+      for a list of channel IDs).
+
+  compatible:
+    const: xlnx,zynqmp-dpdma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: The AXI clock
+    maxItems: 1
+
+  clock-names:
+    const: axi_clk
+
+required:
+  - "#dma-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dma: dma-controller@fd4c0000 {
+      compatible = "xlnx,zynqmp-dpdma";
+      reg = <0x0 0xfd4c0000 0x0 0x1000>;
+      interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-parent = <&gic>;
+      clocks = <&dpdma_clk>;
+      clock-names = "axi_clk";
+      #dma-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt b/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt
index ba455589f869..e1c49b660d3a 100644
--- a/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt
@@ -12,7 +12,7 @@ Required properties for the top level node:
    Only the GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
 - #interrupt-cells : Specifies the number of cells needed to encode an
    interrupt. Should be 2. The first cell defines the interrupt number,
-   the second encodes the triger flags encoded as described in
+   the second encodes the trigger flags encoded as described in
    Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
 - compatible:
   - "mediatek,mt7621-gpio" for Mediatek controllers
diff --git a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
index e13405355166..e6bbcae4d07f 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
@@ -10,7 +10,7 @@ Interrupt number definition:
  16-31  : private  irq, and we use 16 as the co-processor timer.
  31-1024: common irq for soc ip.
 
-Interrupt triger mode: (Defined in dt-bindings/interrupt-controller/irq.h)
+Interrupt trigger mode: (Defined in dt-bindings/interrupt-controller/irq.h)
  IRQ_TYPE_LEVEL_HIGH (default)
  IRQ_TYPE_LEVEL_LOW
  IRQ_TYPE_EDGE_RISING
diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
index 4438432bfe9b..ad76edccf881 100644
--- a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
+++ b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
@@ -87,7 +87,7 @@ Example:
 		ranges;
 
 		/* APU<->RPU0 IPI mailbox controller */
-		ipi_mailbox_rpu0: mailbox@ff90400 {
+		ipi_mailbox_rpu0: mailbox@ff990400 {
 			reg = <0xff990400 0x20>,
 			      <0xff990420 0x20>,
 			      <0xff990080 0x20>,
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml
index 526593c8c614..4cc1a670c986 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml
@@ -47,6 +47,9 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     description: Phandle to the device SRAM
 
+  iommus:
+    maxItems: 1
+
   memory-region:
     description:
       CMA pool to use for buffers allocation instead of the default
diff --git a/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt
index 8c4d649cdd8f..2d7cdf19a0d0 100644
--- a/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt
+++ b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.txt
@@ -8,7 +8,7 @@ The embedded controller requires the SPI controller driver to signal readiness
 to receive a transfer (that is, when TX FIFO contains the response data) by
 strobing the ACK pin with the ready signal. See the "ready-gpios" property of the
 SSP binding as documented in:
-<Documentation/devicetree/bindings/spi/spi-pxa2xx.txt>.
+<Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml>.
 
 Example:
 	&ssp3 {
diff --git a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt
index 219bcbd0d344..9ef5bacda8c1 100644
--- a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt
+++ b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt
@@ -3,7 +3,7 @@ MediaTek SoC built-in Bluetooth Devices
 
 This device is a serial attached device to BTIF device and thus it must be a
 child node of the serial node with BTIF. The dt-bindings details for BTIF
-device can be known via Documentation/devicetree/bindings/serial/8250.txt.
+device can be known via Documentation/devicetree/bindings/serial/8250.yaml.
 
 Required properties:
 
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
index b68613188c19..1b8e8b4a6379 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
@@ -114,7 +114,7 @@ with values derived from the SoC user manual.
    [flags]>
 
 On other mach-shmobile platforms GPIO is handled by the gpio-rcar driver.
-Please refer to Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
+Please refer to Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
 for documentation of the GPIO device tree bindings on those platforms.
 
 
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-card.txt
index 269682619a70..d5f6919a2d69 100644
--- a/Documentation/devicetree/bindings/sound/audio-graph-card.txt
+++ b/Documentation/devicetree/bindings/sound/audio-graph-card.txt
@@ -5,7 +5,7 @@ It is based on common bindings for device graphs.
 see ${LINUX}/Documentation/devicetree/bindings/graph.txt
 
 Basically, Audio Graph Card property is same as Simple Card.
-see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.txt
+see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.yaml
 
 Below are same as Simple-Card.
 
diff --git a/Documentation/devicetree/bindings/sound/simple-card.yaml b/Documentation/devicetree/bindings/sound/simple-card.yaml
index 8132d0c0f00a..35e669020296 100644
--- a/Documentation/devicetree/bindings/sound/simple-card.yaml
+++ b/Documentation/devicetree/bindings/sound/simple-card.yaml
@@ -378,6 +378,8 @@ examples:
   - |
     sound {
         compatible = "simple-audio-card";
+        #address-cells = <1>;
+        #size-cells = <0>;
 
         simple-audio-card,name = "rsnd-ak4643";
         simple-audio-card,format = "left_j";
@@ -391,10 +393,12 @@ examples:
                                     "ak4642 Playback", "DAI1 Playback";
 
         dpcmcpu: simple-audio-card,cpu@0 {
+            reg = <0>;
             sound-dai = <&rcar_sound 0>;
         };
 
         simple-audio-card,cpu@1 {
+            reg = <1>;
             sound-dai = <&rcar_sound 1>;
         };
 
@@ -418,6 +422,8 @@ examples:
   - |
     sound {
         compatible = "simple-audio-card";
+        #address-cells = <1>;
+        #size-cells = <0>;
 
         simple-audio-card,routing =
             "pcm3168a Playback", "DAI1 Playback",
@@ -426,6 +432,7 @@ examples:
             "pcm3168a Playback", "DAI4 Playback";
 
         simple-audio-card,dai-link@0 {
+            reg = <0>;
             format = "left_j";
             bitclock-master = <&sndcpu0>;
             frame-master = <&sndcpu0>;
@@ -439,22 +446,23 @@ examples:
         };
 
         simple-audio-card,dai-link@1 {
+            reg = <1>;
             format = "i2s";
             bitclock-master = <&sndcpu1>;
             frame-master = <&sndcpu1>;
 
             convert-channels = <8>; /* TDM Split */
 
-            sndcpu1: cpu@0 {
+            sndcpu1: cpu0 {
                 sound-dai = <&rcar_sound 1>;
             };
-            cpu@1 {
+            cpu1 {
                 sound-dai = <&rcar_sound 2>;
             };
-            cpu@2 {
+            cpu2 {
                 sound-dai = <&rcar_sound 3>;
             };
-            cpu@3 {
+            cpu3 {
                 sound-dai = <&rcar_sound 4>;
             };
             codec {
@@ -466,6 +474,7 @@ examples:
         };
 
         simple-audio-card,dai-link@2 {
+            reg = <2>;
             format = "i2s";
             bitclock-master = <&sndcpu2>;
             frame-master = <&sndcpu2>;
diff --git a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
index 4d51f3f5ea98..a6ffcdec6f6a 100644
--- a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
+++ b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
@@ -5,7 +5,7 @@ codec or external codecs.
 
 sti sound drivers allows to expose sti SoC audio interface through the
 generic ASoC simple card. For details about sound card declaration please refer to
-Documentation/devicetree/bindings/sound/simple-card.txt.
+Documentation/devicetree/bindings/sound/simple-card.yaml.
 
 1) sti-uniperiph-dai: audio dai device.
 ---------------------------------------
diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
index 9147df29022a..38efb50081e3 100644
--- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
+++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
@@ -34,12 +34,15 @@ properties:
     maxItems: 1
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: controller register bus clock
+      - description: baud rate generator and delay control clock
 
   clock-names:
-    description: input clock for the baud rate generator
-    items:
-      - const: core
+    minItems: 1
+    maxItems: 2
 
 if:
   properties:
@@ -51,17 +54,22 @@ if:
 then:
   properties:
     clocks:
-      contains:
-        items:
-          - description: controller register bus clock
-          - description: baud rate generator and delay control clock
+      minItems: 2
 
     clock-names:
-      minItems: 2
       items:
         - const: core
         - const: pclk
 
+else:
+  properties:
+    clocks:
+      maxItems: 1
+
+    clock-names:
+      items:
+        - const: core
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt
index 790311a42bf1..c8c1e913f4e7 100644
--- a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt
@@ -19,7 +19,7 @@ Required properties:
 
 SPI Controller nodes must be child of GENI based Qualcomm Universal
 Peripharal. Please refer GENI based QUP wrapper controller node bindings
-described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt.
+described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml.
 
 SPI slave nodes must be children of the SPI master node and conform to SPI bus
 binding as described in Documentation/devicetree/bindings/spi/spi-bus.txt.
diff --git a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
index fcd25a0af38c..727d04550324 100644
--- a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
+++ b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
@@ -41,7 +41,7 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     // Example 1: SDM845 TSENS
-    soc: soc@0 {
+    soc: soc {
             #address-cells = <2>;
             #size-cells = <2>;
 
diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
index b8515d3eeaa2..3ec9cc87ec50 100644
--- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
+++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
@@ -224,7 +224,7 @@ examples:
     #include <dt-bindings/thermal/thermal.h>
 
     // Example 1: SDM845 TSENS
-    soc: soc@0 {
+    soc {
             #address-cells = <2>;
             #size-cells = <2>;
 
diff --git a/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
index 25b9209c2e5d..ea14de80ec75 100644
--- a/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
@@ -35,7 +35,7 @@ examples:
     #include <dt-bindings/soc/ti,sci_pm_domain.h>
     vtm: thermal@42050000 {
         compatible = "ti,am654-vtm";
-        reg = <0x0 0x42050000 0x0 0x25c>;
+        reg = <0x42050000 0x25c>;
         power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
         #thermal-sensor-cells = <1>;
     };
diff --git a/Documentation/devicetree/bindings/timer/csky,mptimer.txt b/Documentation/devicetree/bindings/timer/csky,mptimer.txt
index 15cfec08fbb8..f5c7e99cf52b 100644
--- a/Documentation/devicetree/bindings/timer/csky,mptimer.txt
+++ b/Documentation/devicetree/bindings/timer/csky,mptimer.txt
@@ -8,7 +8,7 @@ regs is accessed by cpu co-processor 4 registers with mtcr/mfcr.
  - PTIM_CTLR "cr<0, 14>" Control reg to start reset timer.
  - PTIM_TSR  "cr<1, 14>" Interrupt cleanup status reg.
  - PTIM_CCVR "cr<3, 14>" Current counter value reg.
- - PTIM_LVR  "cr<6, 14>" Window value reg to triger next event.
+ - PTIM_LVR  "cr<6, 14>" Window value reg to trigger next event.
 
 ==============================
 timer node bindings definition
diff --git a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml
index e4e83d3971ac..8b019ac05bbe 100644
--- a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml
+++ b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml
@@ -127,8 +127,8 @@ examples:
                 #address-cells = <1>;
                 #size-cells = <0>;
 
-                string@0409 {
-                        reg = <0x0409>;
+                string@409 {
+                        reg = <0x409>;
                         manufacturer = "ASPEED";
                         product = "USB Virtual Hub";
                         serial-number = "0000";
diff --git a/Documentation/devicetree/writing-schema.rst b/Documentation/devicetree/writing-schema.rst
index 220cf464ed77..8c74a99f95e2 100644
--- a/Documentation/devicetree/writing-schema.rst
+++ b/Documentation/devicetree/writing-schema.rst
@@ -1,4 +1,4 @@
-:orphan:
+.. SPDX-License-Identifier: GPL-2.0
 
 Writing DeviceTree Bindings in json-schema
 ==========================================
@@ -124,9 +124,12 @@ dtc must also be built with YAML output support enabled. This requires that
 libyaml and its headers be installed on the host system. For some distributions
 that involves installing the development package, such as:
 
-Debian:
+Debian::
+
   apt-get install libyaml-dev
-Fedora:
+
+Fedora::
+
   dnf -y install libyaml-devel
 
 Running checks