diff options
| author | Tony Luck <tony.luck@intel.com> | 2021-10-26 15:00:49 -0700 |
|---|---|---|
| committer | Dave Hansen <dave.hansen@linux.intel.com> | 2021-11-15 11:13:16 -0800 |
| commit | c6acb1e7bf4656b9434335c72b8245cc84575fde (patch) | |
| tree | b97d6134e6af7d05b966523b83f3e331e6123295 /Documentation/firmware-guide | |
| parent | 03b122da74b22fbe7cd98184fa5657a9ce13970c (diff) | |
x86/sgx: Add hook to error injection address validation
SGX reserved memory does not appear in the standard address maps.
Add hook to call into the SGX code to check if an address is located
in SGX memory.
There are other challenges in injecting errors into SGX. Update the
documentation with a sequence of operations to inject.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/20211026220050.697075-7-tony.luck@intel.com
Diffstat (limited to 'Documentation/firmware-guide')
| -rw-r--r-- | Documentation/firmware-guide/acpi/apei/einj.rst | 19 |
1 files changed, 19 insertions, 0 deletions
diff --git a/Documentation/firmware-guide/acpi/apei/einj.rst b/Documentation/firmware-guide/acpi/apei/einj.rst index c042176e1707..55e2331a6438 100644 --- a/Documentation/firmware-guide/acpi/apei/einj.rst +++ b/Documentation/firmware-guide/acpi/apei/einj.rst @@ -181,5 +181,24 @@ You should see something like this in dmesg:: [22715.834759] EDAC sbridge MC3: PROCESSOR 0:306e7 TIME 1422553404 SOCKET 0 APIC 0 [22716.616173] EDAC MC3: 1 CE memory read error on CPU_SrcID#0_Channel#0_DIMM#0 (channel:0 slot:0 page:0x12345 offset:0x0 grain:32 syndrome:0x0 - area:DRAM err_code:0001:0090 socket:0 channel_mask:1 rank:0) +Special notes for injection into SGX enclaves: + +There may be a separate BIOS setup option to enable SGX injection. + +The injection process consists of setting some special memory controller +trigger that will inject the error on the next write to the target +address. But the h/w prevents any software outside of an SGX enclave +from accessing enclave pages (even BIOS SMM mode). + +The following sequence can be used: + 1) Determine physical address of enclave page + 2) Use "notrigger=1" mode to inject (this will setup + the injection address, but will not actually inject) + 3) Enter the enclave + 4) Store data to the virtual address matching physical address from step 1 + 5) Execute CLFLUSH for that virtual address + 6) Spin delay for 250ms + 7) Read from the virtual address. This will trigger the error + For more information about EINJ, please refer to ACPI specification version 4.0, section 17.5 and ACPI 5.0, section 18.6. |