summaryrefslogtreecommitdiff
path: root/Documentation/input
diff options
context:
space:
mode:
authorLinus Walleij <linus.walleij@linaro.org>2018-01-01 22:49:29 -0800
committerDmitry Torokhov <dmitry.torokhov@gmail.com>2018-01-01 22:54:42 -0800
commit3c8a23c29d30eec7a20fbb3e47e5346d9ada687b (patch)
treebc0918b6e71e8c50118b9c7637e72fdafbd93687 /Documentation/input
parentb3495cecb24c8e38e1b0c569c69c983b6a2d6d9c (diff)
Input: gpio_tilt - delete driver
This driver was merged in 2011 as a tool for detecting the orientation of a screen. The device driver assumes board file setup using the platform data from <linux/input/gpio_tilt.h>. But no boards in the kernel tree defines this platform data. As I am faced with refactoring drivers to use GPIO descriptors and pass decriptor tables from boards, or use the device tree device drivers like these creates a serious problem: I cannot fix them and cannot test them, not even compile-test them with a system actually using it (no in-tree boardfile). I suggest to delete this driver and rewrite it using device tree if it is still in use on actively maintained systems. I can also offer to rewrite it out of the blue using device tree if someone promise to test it and help me iterate it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Patchwork-Id: 10133609 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Diffstat (limited to 'Documentation/input')
-rw-r--r--Documentation/input/devices/gpio-tilt.rst103
1 files changed, 0 insertions, 103 deletions
diff --git a/Documentation/input/devices/gpio-tilt.rst b/Documentation/input/devices/gpio-tilt.rst
deleted file mode 100644
index fa6e64570aa7..000000000000
--- a/Documentation/input/devices/gpio-tilt.rst
+++ /dev/null
@@ -1,103 +0,0 @@
-Driver for tilt-switches connected via GPIOs
-============================================
-
-Generic driver to read data from tilt switches connected via gpios.
-Orientation can be provided by one or more than one tilt switches,
-i.e. each tilt switch providing one axis, and the number of axes
-is also not limited.
-
-
-Data structures
----------------
-
-The array of struct gpio in the gpios field is used to list the gpios
-that represent the current tilt state.
-
-The array of struct gpio_tilt_axis describes the axes that are reported
-to the input system. The values set therein are used for the
-input_set_abs_params calls needed to init the axes.
-
-The array of struct gpio_tilt_state maps gpio states to the corresponding
-values to report. The gpio state is represented as a bitfield where the
-bit-index corresponds to the index of the gpio in the struct gpio array.
-In the same manner the values stored in the axes array correspond to
-the elements of the gpio_tilt_axis-array.
-
-
-Example
--------
-
-Example configuration for a single TS1003 tilt switch that rotates around
-one axis in 4 steps and emits the current tilt via two GPIOs::
-
- static int sg060_tilt_enable(struct device *dev) {
- /* code to enable the sensors */
- };
-
- static void sg060_tilt_disable(struct device *dev) {
- /* code to disable the sensors */
- };
-
- static struct gpio sg060_tilt_gpios[] = {
- { SG060_TILT_GPIO_SENSOR1, GPIOF_IN, "tilt_sensor1" },
- { SG060_TILT_GPIO_SENSOR2, GPIOF_IN, "tilt_sensor2" },
- };
-
- static struct gpio_tilt_state sg060_tilt_states[] = {
- {
- .gpios = (0 << 1) | (0 << 0),
- .axes = (int[]) {
- 0,
- },
- }, {
- .gpios = (0 << 1) | (1 << 0),
- .axes = (int[]) {
- 1, /* 90 degrees */
- },
- }, {
- .gpios = (1 << 1) | (1 << 0),
- .axes = (int[]) {
- 2, /* 180 degrees */
- },
- }, {
- .gpios = (1 << 1) | (0 << 0),
- .axes = (int[]) {
- 3, /* 270 degrees */
- },
- },
- };
-
- static struct gpio_tilt_axis sg060_tilt_axes[] = {
- {
- .axis = ABS_RY,
- .min = 0,
- .max = 3,
- .fuzz = 0,
- .flat = 0,
- },
- };
-
- static struct gpio_tilt_platform_data sg060_tilt_pdata= {
- .gpios = sg060_tilt_gpios,
- .nr_gpios = ARRAY_SIZE(sg060_tilt_gpios),
-
- .axes = sg060_tilt_axes,
- .nr_axes = ARRAY_SIZE(sg060_tilt_axes),
-
- .states = sg060_tilt_states,
- .nr_states = ARRAY_SIZE(sg060_tilt_states),
-
- .debounce_interval = 100,
-
- .poll_interval = 1000,
- .enable = sg060_tilt_enable,
- .disable = sg060_tilt_disable,
- };
-
- static struct platform_device sg060_device_tilt = {
- .name = "gpio-tilt-polled",
- .id = -1,
- .dev = {
- .platform_data = &sg060_tilt_pdata,
- },
- };