summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2019-07-09 09:59:43 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2019-07-09 09:59:43 -0700
commit4cdd5f9186bbe80306e76f11da7ecb0b9720433c (patch)
tree23c2f39933cd8253a65385eab00405beaf602f01 /Documentation
parent2d41ef5432b76ae90dc0db93026f1d981f874ec4 (diff)
parent0dcb4efb1095d0a1f5f681c2b94e98b009cc5d77 (diff)
Merge tag 'sound-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai: "Many updates in this development cycle are found in ASoC where it got a wide range of changes for the continued refactoring. Some highlights are below. ASoC: - Continued refactoring work by Morimoto-san toward the full componentization; the changes are seen allover the places - Support for force disconnecting muxes in DAPM - Continued development of ASoC Intel SOF stuff - New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant CX2072X, Realtek RT1011 and RT1308 HD-audio: - More fixes and adjustments for ASoC SOF HD-audio - Fix for resume problem on some Realtek codecs USB-audio: - A few fixes for the issues reported by syzbot USB fuzzer - Fix for UAC2 extension unit parser - Quirks for Line6 Helix, Emgaic Unitor 8 FireWire: - Lots of code refactoring and fixes in most of its components" * tag 'sound-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (626 commits) ALSA: firewire-lib: code refactoring for local variables ALSA: firewire-lib: code refactoring for post operation to data block counter ALSA: firewire-lib: code refactoring for error path of parser for CIP header ALSA: firewire-lib: fix different data block counter between probed event and transferred isochronous packet ALSA: firewire-lib: fix initial value of data block count for IR context without CIP_DBC_IS_END_EVENT ALSA: firewire-lib/fireface: fix initial value of data block counter for IR context with CIP_NO_HEADER ALSA: firewire-lib: fix invalid length of rx packet payload for tracepoint events ALSA: usb-audio: fix Line6 Helix audio format rates firewire-motu: fix wrong reference count for stream functionality at error path of rawmidi interface ALSA: firewire-digi00x: fix wrong reference count for stream functionality at error path of rawmidi interface ALSA: dice: fix wrong reference count for stream functionality at error path of rawmidi interface ALSA: oxfw: fix wrong reference count for stream functionality at error path of rawmidi interface ALSA: fireworks: fix wrong reference count for stream functionality at error path of rawmidi interface ALSA: bebob: fix wrong reference count for stream functionality at error path of rawmidi interface ASoC: SOF: Intel: implement runtime idle for CNL/APL ASoC: SOF: add runtime idle callback ASoC: hdac_hdmi: report codec link up/down status to bus ASoC: SOF: debug: fix possible memory leak in sof_dfsentry_write() ASoC: sunxi: sun50i-codec-analog: Add earpiece ASoC: rt5665: remove redundant assignment to variable idx ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/media/st,stm32-dcmi.txt2
-rw-r--r--Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml132
-rw-r--r--Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml120
-rw-r--r--Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt6
-rw-r--r--Documentation/devicetree/bindings/sound/amlogic,g12a-tohdmitx.txt55
-rw-r--r--Documentation/devicetree/bindings/sound/cs42xx8.txt6
-rw-r--r--Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt3
-rw-r--r--Documentation/devicetree/bindings/sound/madera.txt67
-rw-r--r--Documentation/devicetree/bindings/sound/max98357a.txt4
-rw-r--r--Documentation/devicetree/bindings/sound/rt1011.txt32
-rwxr-xr-xDocumentation/devicetree/bindings/sound/rt1308.txt17
-rw-r--r--Documentation/devicetree/bindings/sound/st,stm32-i2s.txt2
-rw-r--r--Documentation/devicetree/bindings/sound/st,stm32-sai.txt2
-rw-r--r--Documentation/devicetree/bindings/sound/sun4i-i2s.txt45
-rw-r--r--Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt42
15 files changed, 444 insertions, 91 deletions
diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmi.txt b/Documentation/devicetree/bindings/media/st,stm32-dcmi.txt
index 249790a93017..3122ded82eb4 100644
--- a/Documentation/devicetree/bindings/media/st,stm32-dcmi.txt
+++ b/Documentation/devicetree/bindings/media/st,stm32-dcmi.txt
@@ -11,7 +11,7 @@ Required properties:
- clock-names: must contain "mclk", which is the DCMI peripherial clock
- pinctrl: the pincontrol settings to configure muxing properly
for pins that connect to DCMI device.
- See Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt.
+ See Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml.
- dmas: phandle to DMA controller node,
see Documentation/devicetree/bindings/dma/stm32-dma.txt
- dma-names: must contain "tx", which is the transmit channel from DCMI to DMA
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
new file mode 100644
index 000000000000..eb3992138eec
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/allwinner,sun4i-a10-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 I2S Controller Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <maxime.ripard@bootlin.com>
+
+properties:
+ "#sound-dai-cells":
+ const: 0
+
+ compatible:
+ oneOf:
+ - const: allwinner,sun4i-a10-i2s
+ - const: allwinner,sun6i-a31-i2s
+ - const: allwinner,sun8i-a83t-i2s
+ - const: allwinner,sun8i-h3-i2s
+ - const: allwinner,sun50i-a64-codec-i2s
+ - items:
+ - const: allwinner,sun50i-a64-i2s
+ - const: allwinner,sun8i-h3-i2s
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Bus Clock
+ - description: Module Clock
+
+ clock-names:
+ items:
+ - const: apb
+ - const: mod
+
+ # Even though it only applies to subschemas under the conditionals,
+ # not listing them here will trigger a warning because of the
+ # additionalsProperties set to false.
+ dmas: true
+ dma-names: true
+ resets:
+ maxItems: 1
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun6i-a31-i2s
+ - allwinner,sun8i-a83t-i2s
+ - allwinner,sun8i-h3-i2s
+ - allwinner,sun50i-a64-codec-i2s
+
+ then:
+ required:
+ - resets
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: allwinner,sun8i-a83t-i2s
+
+ then:
+ properties:
+ dmas:
+ minItems: 1
+ maxItems: 2
+ items:
+ - description: RX DMA Channel
+ - description: TX DMA Channel
+ description:
+ Some controllers cannot receive but can only transmit
+ data. In such a case, the RX DMA channel is to be omitted.
+
+ dma-names:
+ oneOf:
+ - items:
+ - const: rx
+ - const: tx
+ - const: tx
+ description:
+ Some controllers cannot receive but can only transmit
+ data. In such a case, the RX name is to be omitted.
+
+ else:
+ properties:
+ dmas:
+ items:
+ - description: RX DMA Channel
+ - description: TX DMA Channel
+
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
+
+required:
+ - "#sound-dai-cells"
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - dmas
+ - dma-names
+
+additionalProperties: false
+
+examples:
+ - |
+ i2s0: i2s@1c22400 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun4i-a10-i2s";
+ reg = <0x01c22400 0x400>;
+ interrupts = <0 16 4>;
+ clocks = <&apb0_gates 3>, <&i2s0_clk>;
+ clock-names = "apb", "mod";
+ dmas = <&dma 0 3>, <&dma 0 3>;
+ dma-names = "rx", "tx";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml
new file mode 100644
index 000000000000..e0284d8c3b63
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/allwinner,sun4i-a10-spdif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 S/PDIF Controller Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Liam Girdwood <lgirdwood@gmail.com>
+ - Mark Brown <broonie@kernel.org>
+ - Maxime Ripard <maxime.ripard@bootlin.com>
+
+properties:
+ "#sound-dai-cells":
+ const: 0
+
+ compatible:
+ oneOf:
+ - const: allwinner,sun4i-a10-spdif
+ - const: allwinner,sun6i-a31-spdif
+ - const: allwinner,sun8i-h3-spdif
+ - const: allwinner,sun50i-h6-spdif
+ - items:
+ - const: allwinner,sun8i-a83t-spdif
+ - const: allwinner,sun8i-h3-spdif
+ - items:
+ - const: allwinner,sun50i-a64-spdif
+ - const: allwinner,sun8i-h3-spdif
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Bus Clock
+ - description: Module Clock
+
+ clock-names:
+ items:
+ - const: apb
+ - const: spdif
+
+ # Even though it only applies to subschemas under the conditionals,
+ # not listing them here will trigger a warning because of the
+ # additionalsProperties set to false.
+ dmas: true
+ dma-names: true
+ resets:
+ maxItems: 1
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun6i-a31-spdif
+ - allwinner,sun8i-h3-spdif
+
+ then:
+ required:
+ - resets
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: allwinner,sun8i-h3-spdif
+
+ then:
+ properties:
+ dmas:
+ description: TX DMA Channel
+
+ dma-names:
+ const: tx
+
+ else:
+ properties:
+ dmas:
+ items:
+ - description: RX DMA Channel
+ - description: TX DMA Channel
+
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
+
+required:
+ - "#sound-dai-cells"
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - dmas
+ - dma-names
+
+additionalProperties: false
+
+examples:
+ - |
+ spdif: spdif@1c21000 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun4i-a10-spdif";
+ reg = <0x01c21000 0x40>;
+ interrupts = <13>;
+ clocks = <&apb0_gates 1>, <&spdif_clk>;
+ clock-names = "apb", "spdif";
+ dmas = <&dma 0 2>, <&dma 0 2>;
+ dma-names = "rx", "tx";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt
index 3b94a715a0b9..8835a43edfbb 100644
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt
@@ -15,11 +15,15 @@ Required properties:
* "lrclk" : sample clock
* "lrclk_sel": sample clock input multiplexer
-Example of TDMOUT_A on the A113 SoC:
+Optional property:
+- resets: phandle to the dedicated reset line of the tdm formatter.
+
+Example of TDMOUT_A on the S905X2 SoC:
tdmout_a: audio-controller@500 {
compatible = "amlogic,axg-tdmout";
reg = <0x0 0x500 0x0 0x40>;
+ resets = <&clkc_audio AUD_RESET_TDMOUT_A>;
clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
<&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
<&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
diff --git a/Documentation/devicetree/bindings/sound/amlogic,g12a-tohdmitx.txt b/Documentation/devicetree/bindings/sound/amlogic,g12a-tohdmitx.txt
new file mode 100644
index 000000000000..aa6c35570d31
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,g12a-tohdmitx.txt
@@ -0,0 +1,55 @@
+* Amlogic HDMI Tx control glue
+
+Required properties:
+- compatible: "amlogic,g12a-tohdmitx"
+- reg: physical base address of the controller and length of memory
+ mapped region.
+- #sound-dai-cells: should be 1.
+
+Example on the S905X2 SoC:
+
+tohdmitx: audio-controller@744 {
+ compatible = "amlogic,g12a-tohdmitx";
+ reg = <0x0 0x744 0x0 0x4>;
+ #sound-dai-cells = <1>;
+};
+
+Example of an 'amlogic,axg-sound-card':
+
+sound {
+ compatible = "amlogic,axg-sound-card";
+
+[...]
+
+ dai-link-x {
+ sound-dai = <&tdmif_a>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+
+ codec-0 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+ };
+
+ codec-1 {
+ sound-dai = <&external_dac>;
+ };
+ };
+
+ dai-link-y {
+ sound-dai = <&tdmif_c>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
+ };
+ };
+
+ dai-link-z {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/sound/cs42xx8.txt b/Documentation/devicetree/bindings/sound/cs42xx8.txt
index 8619a156d038..bbfe39347c20 100644
--- a/Documentation/devicetree/bindings/sound/cs42xx8.txt
+++ b/Documentation/devicetree/bindings/sound/cs42xx8.txt
@@ -14,6 +14,11 @@ Required properties:
- VA-supply, VD-supply, VLS-supply, VLC-supply: power supplies for the device,
as covered in Documentation/devicetree/bindings/regulator/regulator.txt
+Optional properties:
+
+ - reset-gpios : a GPIO spec to define which pin is connected to the chip's
+ !RESET pin
+
Example:
cs42888: codec@48 {
@@ -25,4 +30,5 @@ cs42888: codec@48 {
VD-supply = <&reg_audio>;
VLS-supply = <&reg_audio>;
VLC-supply = <&reg_audio>;
+ reset-gpios = <&pca9557_b 1 GPIO_ACTIVE_LOW>;
};
diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
index a58f79f5345c..c483dcec01f8 100644
--- a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
+++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
@@ -44,6 +44,9 @@ Optional properties:
please refer to pinctrl-bindings.txt
- fck_parent : Should contain a valid clock name which will be used as parent
for the McASP fck
+- auxclk-fs-ratio: When McASP is bus master indicates the ratio between AUCLK
+ and FS rate if applicable:
+ AUCLK rate = auxclk-fs-ratio * FS rate
Optional GPIO support:
If any McASP pin need to be used as GPIO then the McASP node must have:
diff --git a/Documentation/devicetree/bindings/sound/madera.txt b/Documentation/devicetree/bindings/sound/madera.txt
new file mode 100644
index 000000000000..5e669ce552f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/madera.txt
@@ -0,0 +1,67 @@
+Cirrus Logic Madera class audio codecs
+
+This describes audio configuration bindings for these codecs.
+
+See also the core bindings for the parent MFD driver:
+See Documentation/devicetree/bindings/mfd/madera.txt
+
+and defines for values used in these bindings:
+include/dt-bindings/sound/madera.h
+
+These properties are all contained in the parent MFD node.
+
+Optional properties:
+ - cirrus,dmic-ref : Indicates how the MICBIAS pins have been externally
+ connected to DMICs on each input, one cell per input.
+ <IN1 IN2 IN3 ...>
+ A value of 0 indicates MICVDD and is the default, other values depend on the
+ codec:
+ For CS47L35 one of the CS47L35_DMIC_REF_xxx values
+ For all other codecs one of the MADERA_DMIC_REF_xxx values
+ Also see the datasheet for a description of the INn_DMIC_SUP field.
+
+ - cirrus,inmode : A list of input mode settings for each input. A maximum of
+ 16 cells, with four cells per input in the order INnAL, INnAR INnBL INnBR.
+ For non-muxed inputs the first two cells for that input set the mode for
+ the left and right channel and the second two cells must be 0.
+ For muxed inputs the first two cells for that input set the mode of the
+ left and right A inputs and the second two cells set the mode of the left
+ and right B inputs.
+ Valid mode values are one of the MADERA_INMODE_xxx. If the array is shorter
+ than the number of inputs the unspecified inputs default to
+ MADERA_INMODE_DIFF.
+
+ - cirrus,out-mono : Mono bit for each output, maximum of six cells if the
+ array is shorter outputs will be set to stereo.
+
+ - cirrus,max-channels-clocked : Maximum number of channels that I2S clocks
+ will be generated for. Useful when clock master for systems where the I2S
+ bus has multiple data lines.
+ One cell for each AIF, use a value of zero for AIFs that should be handled
+ normally.
+
+ - cirrus,pdm-fmt : PDM speaker data format, must contain 2 cells
+ (OUT5 and OUT6). See the PDM_SPKn_FMT field in the datasheet for a
+ description of this value.
+ The second cell is ignored for codecs that do not have OUT6.
+
+ - cirrus,pdm-mute : PDM mute format, must contain 2 cells
+ (OUT5 and OUT6). See the PDM_SPKn_CTRL_1 register in the datasheet for a
+ description of this value.
+ The second cell is ignored for codecs that do not have OUT6.
+
+Example:
+
+cs47l35@0 {
+ compatible = "cirrus,cs47l35";
+
+ cirrus,dmic-ref = <0 0 CS47L35_DMIC_REF_MICBIAS1B 0>;
+ cirrus,inmode = <
+ MADERA_INMODE_DMIC MADERA_INMODE_DMIC /* IN1A digital */
+ MADERA_INMODE_SE MADERA_INMODE_SE /* IN1B single-ended */
+ MADERA_INMODE_DIFF MADERA_INMODE_DIFF /* IN2 differential */
+ 0 0 /* not used on this codec */
+ >;
+ cirrus,out-mono = <0 0 0 0 0 0>;
+ cirrus,max-channels-clocked = <2 0 0>;
+};
diff --git a/Documentation/devicetree/bindings/sound/max98357a.txt b/Documentation/devicetree/bindings/sound/max98357a.txt
index 28645a2ff885..4bce14ce806f 100644
--- a/Documentation/devicetree/bindings/sound/max98357a.txt
+++ b/Documentation/devicetree/bindings/sound/max98357a.txt
@@ -9,6 +9,10 @@ Optional properties:
- sdmode-gpios : GPIO specifier for the chip's SD_MODE pin.
If this option is not specified then driver does not manage
the pin state (e.g. chip is always on).
+- sdmode-delay : specify delay time for SD_MODE pin.
+ If this option is specified, which means it's required i2s clocks
+ ready before SD_MODE is unmuted in order to avoid the speaker pop noise.
+ It's observed that 5ms is sufficient.
Example:
diff --git a/Documentation/devicetree/bindings/sound/rt1011.txt b/Documentation/devicetree/bindings/sound/rt1011.txt
new file mode 100644
index 000000000000..35a23e60d679
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt1011.txt
@@ -0,0 +1,32 @@
+RT1011 Mono Class D Audio Amplifier
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt1011".
+
+- reg : The I2C address of the device. This I2C address decide by
+ two input pins (ASEL1 and ASEL2).
+ -------------------------------------
+ | ASEL2 | ASEL1 | Address |
+ -------------------------------------
+ | 0 | 0 | 0x38 |
+ -------------------------------------
+ | 0 | 1 | 0x39 |
+ -------------------------------------
+ | 1 | 0 | 0x3a |
+ -------------------------------------
+ | 1 | 1 | 0x3b |
+ -------------------------------------
+
+Pins on the device (for linking into audio routes) for RT1011:
+
+ * SPO
+
+Example:
+
+rt1011: codec@38 {
+ compatible = "realtek,rt1011";
+ reg = <0x38>;
+};
diff --git a/Documentation/devicetree/bindings/sound/rt1308.txt b/Documentation/devicetree/bindings/sound/rt1308.txt
new file mode 100755
index 000000000000..2d46084afce4
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt1308.txt
@@ -0,0 +1,17 @@
+RT1308 audio Amplifier
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt1308".
+
+- reg : The I2C address of the device.
+
+
+Example:
+
+rt1308: rt1308@10 {
+ compatible = "realtek,rt1308";
+ reg = <0x10>;
+};
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt b/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt
index 58c341300552..cbf24bcd1b8d 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt
@@ -18,7 +18,7 @@ Required properties:
See Documentation/devicetree/bindings/dma/stm32-dma.txt.
- dma-names: Identifier for each DMA request line. Must be "tx" and "rx".
- pinctrl-names: should contain only value "default"
- - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
+ - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
Optional properties:
- resets: Reference to a reset controller asserting the reset controller
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
index 3f4467ff0aa2..944743dd9212 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
+++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
@@ -41,7 +41,7 @@ SAI subnodes required properties:
"tx": if sai sub-block is configured as playback DAI
"rx": if sai sub-block is configured as capture DAI
- pinctrl-names: should contain only value "default"
- - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
+ - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
SAI subnodes Optional properties:
- st,sync: specify synchronization mode.
diff --git a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
deleted file mode 100644
index 61e71c1729e0..000000000000
--- a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-* Allwinner A10 I2S controller
-
-The I2S bus (Inter-IC sound bus) is a serial link for digital
-audio data transfer between devices in the system.
-
-Required properties:
-
-- compatible: should be one of the following:
- - "allwinner,sun4i-a10-i2s"
- - "allwinner,sun6i-a31-i2s"
- - "allwinner,sun8i-a83t-i2s"
- - "allwinner,sun8i-h3-i2s"
- - "allwinner,sun50i-a64-codec-i2s"
-- reg: physical base address of the controller and length of memory mapped
- region.
-- interrupts: should contain the I2S interrupt.
-- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
- Documentation/devicetree/bindings/dma/dma.txt
-- dma-names: should include "tx" and "rx".
-- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names.
-- clock-names: should contain the following:
- - "apb" : clock for the I2S bus interface
- - "mod" : module clock for the I2S controller
-- #sound-dai-cells : Must be equal to 0
-
-Required properties for the following compatibles:
- - "allwinner,sun6i-a31-i2s"
- - "allwinner,sun8i-a83t-i2s"
- - "allwinner,sun8i-h3-i2s"
- - "allwinner,sun50i-a64-codec-i2s"
-- resets: phandle to the reset line for this codec
-
-Example:
-
-i2s0: i2s@1c22400 {
- #sound-dai-cells = <0>;
- compatible = "allwinner,sun4i-a10-i2s";
- reg = <0x01c22400 0x400>;
- interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 3>, <&i2s0_clk>;
- clock-names = "apb", "mod";
- dmas = <&dma SUN4I_DMA_NORMAL 3>,
- <&dma SUN4I_DMA_NORMAL 3>;
- dma-names = "rx", "tx";
-};
diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
deleted file mode 100644
index 0c64a209c2e9..000000000000
--- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-Allwinner Sony/Philips Digital Interface Format (S/PDIF) Controller
-
-The Allwinner S/PDIF audio block is a transceiver that allows the
-processor to receive and transmit digital audio via an coaxial cable or
-a fibre cable.
-For now only playback is supported.
-
-Required properties:
-
- - compatible : should be one of the following:
- - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC
- - "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC
- - "allwinner,sun8i-h3-spdif": for the Allwinner H3 SoC
-
- - reg : Offset and length of the register set for the device.
-
- - interrupts : Contains the spdif interrupt.
-
- - dmas : Generic dma devicetree binding as described in
- Documentation/devicetree/bindings/dma/dma.txt.
-
- - dma-names : Two dmas have to be defined, "tx" and "rx".
-
- - clocks : Contains an entry for each entry in clock-names.
-
- - clock-names : Includes the following entries:
- "apb" clock for the spdif bus.
- "spdif" clock for spdif controller.
-
- - resets : reset specifier for the ahb reset (A31 and newer only)
-
-Example:
-
-spdif: spdif@1c21000 {
- compatible = "allwinner,sun4i-a10-spdif";
- reg = <0x01c21000 0x40>;
- interrupts = <13>;
- clocks = <&apb0_gates 1>, <&spdif_clk>;
- clock-names = "apb", "spdif";
- dmas = <&dma 0 2>, <&dma 0 2>;
- dma-names = "rx", "tx";
-};