summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-06-11 17:57:38 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2018-06-11 17:57:38 -0700
commit721afaa2aeb860067decdddadc84ed16f42f2048 (patch)
treec529f0aaaa6653ff3cb6fd1bae90faeddbc1f715 /Documentation
parent7c00e8ae041b349992047769af741b67379ce19a (diff)
parent87815dda55934180d8e6ec0a0a448b104d251c54 (diff)
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC device tree updates from Olof Johansson: "As always, a large number of DT updates. Too many to enumerate them all, but at a glance: New SoCs introduced in this release: - Amlogic: + Meson 8M2 SoC, a.k.a. S812. A quad Cortex-A9 SoC used in some set top boxes and other products. - Mediatek: + MT7623A, which is a flavor of the MT7623 family with other on-chip ethernet options. - Qualcomm: + SDM845, a.k.a Snapdragon 845, an 4+4-core Kryo 385/845 (Cortex-A75/A55 derivative) SoC that's one of the current high-end mobile SoCs. It's great to see mainline support for it. So far, you can't do much with it, since a lot of peripherals are not yet in the DTs but driver support for USB, GPU and other pieces are starting to trickle in. This might end up being a well-supported SoC upstream if the momentum keeps up. - Renesas: + R8A77990, a.k.a R-Car E3, a new automotive entertainment-targeted SoC. Currently only one Cortex-A53 CPU is enabled, we are eagerly awaiting more. So far, basic drivers such as serial, gpios, PMU and ethernet are enabled. + R8A77470, a.k.a. RZ/G1C, a new dual Cortex-A7 SoC with PowerVR GPU. Same here, basic set of drivers such as serial, gpios and ethernet enabled, and SMP support is also forthcoming. - STMicroelectronics: + STM32F469, very similar tih STM32F429 but with display support Enhancements to SoCs/platforms (DTS contents, some driver portions might not be in yet): - Allwinner sun8i (h3/a33/a83t) SMP, DVFS tweaks, misc - Amlogic Meson: I2C, UFS, TDM, GPIO external interrupts, MMC resets - Hisilicon hi3660: Thermal cooling, CPU frequency scaling, mailbox interfaces - Marvell Berlin2CD: SMP support, thermal sensors - Mediatek MT7623: Highspeed DMA, audio support - Qualcomm IPQ8074 PCIe support, MSM8996 UFS support - Renesas: Watchdog and PMU support across many platforms - Rockchip RK3399: USB3 OTG support - Samsung Exynos: Audio-over-HDMI on Odroid X/X2/U3 - STMicro STM32: Lots of peripherals added to STM32MP175C - Uniphier: Ethernet support New boards: - Allwinner A20: Olimex A20-SOM-EVB-eMMC variant - Allwinner H2+: Libre Computer ALL-H3-CC (h2+ version) - Allwinner A33: Nintendo NES/SuperNES Classic Edition - Aspeed: S2600WF, Inventec Lanyang BMC, Portwell Neptune - Berlin2CD: Valve Steam Link - Broadcom BCM5301X: Luxul XAP-1610 and XWR-3150 V1 - Broadcom: Raspberry Pi 3 B+ - Mediatek MT7623N and MT7623A: reference boards - Meson 8M2: Tronsmart MXIII Plus - NXP i.MX: Engicam i.CoreM6, DHCOM iMX6 SOM, BTicino i.MX6DL Mamoj - Qualcomm MSM8974: Sony Xperia Z1 Compact support - Qualcomm SDM845: MTP development board - Renesas: Ebisu R8A77990 board - Renesas RZ/G1C: iwg23s: iWave G235-SDB - TI am335x: Pocketbeagle support" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (448 commits) ARM: dts: aspeed: Fix hwrng register address arm64: dts: sprd: whale2: Add the rtc enable clock for watchdog arm64: dts: sprd: Add GPIO and GPIO keys device nodes arm64: dts: sprd: fix typo in 'remote-endpoint' arm64: dts: apq8096-db820c: Removed bt-en-1-8v regulator arm64: dts: fix regulator property name for wlan pcie endpoint arm64: dts: qcom: msm8996: Use UFS_GDSC for UFS ARM: dts: pxa3xx: fix MMC clocks ARM: pxa: dts: add pin definitions for extended GPIOs ARM: pxa: dts: add gpio-ranges to gpio controller ARM: dts: ipq8074: Enable few peripherals for hk01 board ARM: dts: ipq8074: Add pcie nodes ARM: dts: ipq8074: Add peripheral nodes ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c2 board file ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 board file ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi ARM: dts: ipq4019: Change the max opp frequency ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/arm/OMAP/README4
-rw-r--r--Documentation/devicetree/bindings/arm/amlogic.txt6
-rw-r--r--Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt4
-rw-r--r--Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt2
-rw-r--r--Documentation/devicetree/bindings/arm/shmobile.txt10
-rw-r--r--Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt18
-rw-r--r--Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt16
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.txt12
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.txt5
-rw-r--r--Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt1
-rw-r--r--Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.txt37
-rw-r--r--Documentation/devicetree/bindings/rng/brcm,bcm2835.txt9
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt119
-rw-r--r--Documentation/devicetree/bindings/timer/renesas,cmt.txt14
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt2
15 files changed, 226 insertions, 33 deletions
diff --git a/Documentation/arm/OMAP/README b/Documentation/arm/OMAP/README
index 75645c45d14a..90c6c57d61e8 100644
--- a/Documentation/arm/OMAP/README
+++ b/Documentation/arm/OMAP/README
@@ -5,3 +5,7 @@ KERNEL NEW DEPENDENCIES
v4.3+ Update is needed for custom .config files to make sure
CONFIG_REGULATOR_PBIAS is enabled for MMC1 to work
properly.
+
+v4.18+ Update is needed for custom .config files to make sure
+ CONFIG_MMC_SDHCI_OMAP is enabled for all MMC instances
+ to work in DRA7 and K2G based boards.
diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt
index f747f47922c5..69880560c0f0 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.txt
+++ b/Documentation/devicetree/bindings/arm/amlogic.txt
@@ -25,6 +25,10 @@ Boards with the Amlogic Meson8b SoC shall have the following properties:
Required root node property:
compatible: "amlogic,meson8b";
+Boards with the Amlogic Meson8m2 SoC shall have the following properties:
+ Required root node property:
+ compatible: "amlogic,meson8m2";
+
Boards with the Amlogic Meson GXBaby SoC shall have the following properties:
Required root node property:
compatible: "amlogic,meson-gxbb";
@@ -54,6 +58,8 @@ Board compatible values (alphabetically, grouped by SoC):
- "hardkernel,odroid-c1" (Meson8b)
- "tronfy,mxq" (Meson8b)
+ - "tronsmart,mxiii-plus" (Meson8m2)
+
- "amlogic,p200" (Meson gxbb)
- "amlogic,p201" (Meson gxbb)
- "friendlyarm,nanopi-k2" (Meson gxbb)
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt
index 3e3efa046ac5..1e3e29a545e2 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt
@@ -34,6 +34,10 @@ Raspberry Pi 3 Model B
Required root node properties:
compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
+Raspberry Pi 3 Model B+
+Required root node properties:
+compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
+
Raspberry Pi Compute Module
Required root node properties:
compatible = "raspberrypi,compute-module", "brcm,bcm2835";
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
index 14510b215480..bdadc3da9556 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
@@ -21,8 +21,6 @@ Required root node properties:
- "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board.
- "samsung,tm2" - for Exynos5433-based Samsung TM2 board.
- "samsung,tm2e" - for Exynos5433-based Samsung TM2E board.
- - "samsung,sd5v1" - for Exynos5440-based Samsung board.
- - "samsung,ssdk5440" - for Exynos5440-based Samsung board.
* Other companies Exynos SoC based
* FriendlyARM
diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt
index 86ac320323a7..d8cf740132c6 100644
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -47,6 +47,8 @@ SoCs:
compatible = "renesas,r8a77970"
- R-Car V3H (R8A77980)
compatible = "renesas,r8a77980"
+ - R-Car E3 (R8A77990)
+ compatible = "renesas,r8a77990"
- R-Car D3 (R8A77995)
compatible = "renesas,r8a77995"
@@ -69,6 +71,8 @@ Boards:
compatible = "renesas,draak", "renesas,r8a77995"
- Eagle (RTP0RC77970SEB0010S)
compatible = "renesas,eagle", "renesas,r8a77970"
+ - Ebisu (RTP0RC77990SEB0010S)
+ compatible = "renesas,ebisu", "renesas,r8a77990"
- Genmai (RTK772100BC00000BR)
compatible = "renesas,genmai", "renesas,r7s72100"
- GR-Peach (X28A-M01-E/F)
@@ -80,6 +84,8 @@ Boards:
compatible = "renesas,h3ulcb", "renesas,r8a7795"
- Henninger
compatible = "renesas,henninger", "renesas,r8a7791"
+ - iWave Systems RZ/G1C Single Board Computer (iW-RainboW-G23S)
+ compatible = "iwave,g23s", "renesas,r8a77470"
- iWave Systems RZ/G1E SODIMM SOM Development Platform (iW-RainboW-G22D)
compatible = "iwave,g22d", "iwave,g22m", "renesas,r8a7745"
- iWave Systems RZ/G1E SODIMM System On Module (iW-RainboW-G22M-SM)
@@ -110,7 +116,7 @@ Boards:
compatible = "renesas,salvator-x", "renesas,r8a7795"
- Salvator-X (RTP0RC7796SIPB0011S)
compatible = "renesas,salvator-x", "renesas,r8a7796"
- - Salvator-X (RTP0RC7796SIPB0011S (M3N))
+ - Salvator-X (RTP0RC7796SIPB0011S (M3-N))
compatible = "renesas,salvator-x", "renesas,r8a77965"
- Salvator-XS (Salvator-X 2nd version, RTP0RC7795SIPB0012S)
compatible = "renesas,salvator-xs", "renesas,r8a7795"
@@ -126,6 +132,8 @@ Boards:
compatible = "renesas,sk-rzg1m", "renesas,r8a7743"
- Stout (ADAS Starterkit, Y-R-CAR-ADAS-SKH2-BOARD)
compatible = "renesas,stout", "renesas,r8a7790"
+ - V3HSK (Y-ASK-RCAR-V3H-WS10)
+ compatible = "renesas,v3hsk", "renesas,r8a77980"
- V3MSK (Y-ASK-RCAR-V3M-WS10)
compatible = "renesas,v3msk", "renesas,r8a77970"
- Wheat (RTP0RC7792ASKB0000JE)
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt
deleted file mode 100644
index bdf1a612422b..000000000000
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-NVIDIA Tegra30 MC(Memory Controller)
-
-Required properties:
-- compatible : "nvidia,tegra30-mc"
-- reg : Should contain 4 register ranges(address and length); see the
- example below. Note that the MC registers are interleaved with the
- SMMU registers, and hence must be represented as multiple ranges.
-- interrupts : Should contain MC General interrupt.
-
-Example:
- memory-controller {
- compatible = "nvidia,tegra30-mc";
- reg = <0x7000f000 0x010
- 0x7000f03c 0x1b4
- 0x7000f200 0x028
- 0x7000f284 0x17c>;
- interrupts = <0 77 0x04>;
- };
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
index e2b377ed6f91..e950599566a9 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
@@ -10,9 +10,6 @@ Required Properties:
"amlogic,gxl-clkc" for GXL and GXM SoC,
"amlogic,axg-clkc" for AXG SoC.
-- reg: physical base address of the clock controller and length of memory
- mapped region.
-
- #clock-cells: should be 1.
Each clock is assigned an identifier and client nodes can use this identifier
@@ -20,13 +17,22 @@ to specify the clock which they consume. All available clocks are defined as
preprocessor macros in the dt-bindings/clock/gxbb-clkc.h header and can be
used in device tree sources.
+Parent node should have the following properties :
+- compatible: "syscon", "simple-mfd, and "amlogic,meson-gx-hhi-sysctrl" or
+ "amlogic,meson-axg-hhi-sysctrl"
+- reg: base address and size of the HHI system control register space.
+
Example: Clock controller node:
- clkc: clock-controller@c883c000 {
+sysctrl: system-controller@0 {
+ compatible = "amlogic,meson-gx-hhi-sysctrl", "syscon", "simple-mfd";
+ reg = <0 0 0 0x400>;
+
+ clkc: clock-controller {
#clock-cells = <1>;
compatible = "amlogic,gxbb-clkc";
- reg = <0x0 0xc883c000 0x0 0x3db>;
};
+};
Example: UART controller node that consumes the clock generated by the clock
controller:
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.txt b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.txt
index f9632bacbd04..7d60a50a4fa1 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.txt
@@ -6,11 +6,21 @@ Required properties:
example below. Note that the MC registers are interleaved with the
GART registers, and hence must be represented as multiple ranges.
- interrupts : Should contain MC General interrupt.
+- #reset-cells : Should be 1. This cell represents memory client module ID.
+ The assignments may be found in header file <dt-bindings/memory/tegra20-mc.h>
+ or in the TRM documentation.
Example:
- memory-controller@7000f000 {
+ mc: memory-controller@7000f000 {
compatible = "nvidia,tegra20-mc";
reg = <0x7000f000 0x024
0x7000f03c 0x3c4>;
interrupts = <0 77 0x04>;
+ #reset-cells = <1>;
+ };
+
+ video-codec@6001a000 {
+ compatible = "nvidia,tegra20-vde";
+ ...
+ resets = <&mc TEGRA20_MC_RESET_VDE>;
};
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.txt b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.txt
index 14968b048cd3..a878b5908a4d 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.txt
@@ -12,6 +12,9 @@ Required properties:
- clock-names: Must include the following entries:
- mc: the module's clock input
- interrupts: The interrupt outputs from the controller.
+- #reset-cells : Should be 1. This cell represents memory client module ID.
+ The assignments may be found in header file <dt-bindings/memory/tegra30-mc.h>
+ or in the TRM documentation.
Required properties for Tegra30, Tegra114, Tegra124, Tegra132 and Tegra210:
- #iommu-cells: Should be 1. The single cell of the IOMMU specifier defines
@@ -72,12 +75,14 @@ Example SoC include file:
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
+ #reset-cells = <1>;
};
sdhci@700b0000 {
compatible = "nvidia,tegra124-sdhci";
...
iommus = <&mc TEGRA_SWGROUP_SDMMC1A>;
+ resets = <&mc TEGRA124_MC_RESET_SDMMC1>;
};
};
diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
index d69543701d5d..e319fe5e205a 100644
--- a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
+++ b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
@@ -4,6 +4,7 @@ Required properties:
- compatible: Should be one of the following:
"allwinner,sun4i-a10-sid"
"allwinner,sun7i-a20-sid"
+ "allwinner,sun8i-a83t-sid"
"allwinner,sun8i-h3-sid"
"allwinner,sun50i-a64-sid"
diff --git a/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.txt b/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.txt
new file mode 100644
index 000000000000..68395530c0a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.txt
@@ -0,0 +1,37 @@
+Command DB
+---------
+
+Command DB is a database that provides a mapping between resource key and the
+resource address for a system resource managed by a remote processor. The data
+is stored in a shared memory region and is loaded by the remote processor.
+
+Some of the Qualcomm Technologies Inc SoC's have hardware accelerators for
+controlling shared resources. Depending on the board configuration the shared
+resource properties may change. These properties are dynamically probed by the
+remote processor and made available in the shared memory.
+
+The bindings for Command DB is specified in the reserved-memory section in
+devicetree. The devicetree representation of the command DB driver should be:
+
+Properties:
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: Should be "qcom,cmd-db"
+
+- reg:
+ Usage: required
+ Value type: <prop encoded array>
+ Definition: The register address that points to the actual location of
+ the Command DB in memory.
+
+Example:
+
+ reserved-memory {
+ [...]
+ reserved-memory@85fe0000 {
+ reg = <0x0 0x85fe0000 0x0 0x20000>;
+ compatible = "qcom,cmd-db";
+ no-map;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/rng/brcm,bcm2835.txt b/Documentation/devicetree/bindings/rng/brcm,bcm2835.txt
index 627b29531a32..aaac7975f61c 100644
--- a/Documentation/devicetree/bindings/rng/brcm,bcm2835.txt
+++ b/Documentation/devicetree/bindings/rng/brcm,bcm2835.txt
@@ -14,11 +14,16 @@ Optional properties:
- clocks : phandle to clock-controller plus clock-specifier pair
- clock-names : "ipsec" as a clock name
+Optional properties:
+
+- interrupts: specify the interrupt for the RNG block
+
Example:
rng {
- compatible = "brcm,bcm2835-rng";
- reg = <0x7e104000 0x10>;
+ compatible = "brcm,bcm2835-rng";
+ reg = <0x7e104000 0x10>;
+ interrupts = <2 29>;
};
rng@18033000 {
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
new file mode 100644
index 000000000000..d330c73de9a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
@@ -0,0 +1,119 @@
+Qualcomm Technologies, Inc. GENI Serial Engine QUP Wrapper Controller
+
+Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper
+is a programmable module for supporting a wide range of serial interfaces
+like UART, SPI, I2C, I3C, etc. A single QUP module can provide upto 8 Serial
+Interfaces, using its internal Serial Engines. The GENI Serial Engine QUP
+Wrapper controller is modeled as a node with zero or more child nodes each
+representing a serial engine.
+
+Required properties:
+- compatible: Must be "qcom,geni-se-qup".
+- reg: Must contain QUP register address and length.
+- clock-names: Must contain "m-ahb" and "s-ahb".
+- clocks: AHB clocks needed by the device.
+
+Required properties if child node exists:
+- #address-cells: Must be <1> for Serial Engine Address
+- #size-cells: Must be <1> for Serial Engine Address Size
+- ranges: Must be present
+
+Properties for children:
+
+A GENI based QUP wrapper controller node can contain 0 or more child nodes
+representing serial devices. These serial devices can be a QCOM UART, I2C
+controller, SPI controller, or some combination of aforementioned devices.
+Please refer below the child node definitions for the supported serial
+interface protocols.
+
+Qualcomm Technologies Inc. GENI Serial Engine based I2C Controller
+
+Required properties:
+- compatible: Must be "qcom,geni-i2c".
+- reg: Must contain QUP register address and length.
+- interrupts: Must contain I2C interrupt.
+- clock-names: Must contain "se".
+- clocks: Serial engine core clock needed by the device.
+- #address-cells: Must be <1> for I2C device address.
+- #size-cells: Must be <0> as I2C addresses have no size component.
+
+Optional property:
+- clock-frequency: Desired I2C bus clock frequency in Hz.
+ When missing default to 400000Hz.
+
+Child nodes should conform to I2C bus binding as described in i2c.txt.
+
+Qualcomm Technologies Inc. GENI Serial Engine based UART Controller
+
+Required properties:
+- compatible: Must be "qcom,geni-debug-uart".
+- reg: Must contain UART register location and length.
+- interrupts: Must contain UART core interrupts.
+- clock-names: Must contain "se".
+- clocks: Serial engine core clock needed by the device.
+
+Qualcomm Technologies Inc. GENI Serial Engine based SPI Controller
+
+Required properties:
+- compatible: Must contain "qcom,geni-spi".
+- reg: Must contain SPI register location and length.
+- interrupts: Must contain SPI controller interrupts.
+- clock-names: Must contain "se".
+- clocks: Serial engine core clock needed by the device.
+- spi-max-frequency: Specifies maximum SPI clock frequency, units - Hz.
+- #address-cells: Must be <1> to define a chip select address on
+ the SPI bus.
+- #size-cells: Must be <0>.
+
+SPI slave nodes must be children of the SPI master node and conform to SPI bus
+binding as described in Documentation/devicetree/bindings/spi/spi-bus.txt.
+
+Example:
+ geniqup@8c0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0x8c0000 0x6000>;
+ clock-names = "m-ahb", "s-ahb";
+ clocks = <&clock_gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+ <&clock_gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ i2c0: i2c@a94000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0xa94000 0x4000>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "se";
+ clocks = <&clock_gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&qup_1_i2c_5_active>;
+ pinctrl-1 = <&qup_1_i2c_5_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ uart0: serial@a88000 {
+ compatible = "qcom,geni-debug-uart";
+ reg = <0xa88000 0x7000>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "se";
+ clocks = <&clock_gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&qup_1_uart_3_active>;
+ pinctrl-1 = <&qup_1_uart_3_sleep>;
+ };
+
+ spi0: spi@a84000 {
+ compatible = "qcom,geni-spi";
+ reg = <0xa84000 0x4000>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "se";
+ clocks = <&clock_gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&qup_1_spi_2_active>;
+ pinctrl-1 = <&qup_1_spi_2_sleep>;
+ spi-max-frequency = <19200000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ }
diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.txt b/Documentation/devicetree/bindings/timer/renesas,cmt.txt
index d740989eb569..b40add2d9bb4 100644
--- a/Documentation/devicetree/bindings/timer/renesas,cmt.txt
+++ b/Documentation/devicetree/bindings/timer/renesas,cmt.txt
@@ -22,6 +22,10 @@ Required Properties:
- "renesas,r8a73a4-cmt0" for the 32-bit CMT0 device included in r8a73a4.
- "renesas,r8a73a4-cmt1" for the 48-bit CMT1 device included in r8a73a4.
+ - "renesas,r8a7743-cmt0" for the 32-bit CMT0 device included in r8a7743.
+ - "renesas,r8a7743-cmt1" for the 48-bit CMT1 device included in r8a7743.
+ - "renesas,r8a7745-cmt0" for the 32-bit CMT0 device included in r8a7745.
+ - "renesas,r8a7745-cmt1" for the 48-bit CMT1 device included in r8a7745.
- "renesas,r8a7790-cmt0" for the 32-bit CMT0 device included in r8a7790.
- "renesas,r8a7790-cmt1" for the 48-bit CMT1 device included in r8a7790.
- "renesas,r8a7791-cmt0" for the 32-bit CMT0 device included in r8a7791.
@@ -31,10 +35,12 @@ Required Properties:
- "renesas,r8a7794-cmt0" for the 32-bit CMT0 device included in r8a7794.
- "renesas,r8a7794-cmt1" for the 48-bit CMT1 device included in r8a7794.
- - "renesas,rcar-gen2-cmt0" for 32-bit CMT0 devices included in R-Car Gen2.
- - "renesas,rcar-gen2-cmt1" for 48-bit CMT1 devices included in R-Car Gen2.
- These are fallbacks for r8a73a4 and all the R-Car Gen2
- entries listed above.
+ - "renesas,rcar-gen2-cmt0" for 32-bit CMT0 devices included in R-Car Gen2
+ and RZ/G1.
+ - "renesas,rcar-gen2-cmt1" for 48-bit CMT1 devices included in R-Car Gen2
+ and RZ/G1.
+ These are fallbacks for r8a73a4, R-Car Gen2 and RZ/G1 entries
+ listed above.
- reg: base address and length of the registers block for the timer module.
- interrupts: interrupt-specifier for the timer, one per channel.
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 4b38f3373f43..7cad066191ee 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -58,6 +58,7 @@ bosch Bosch Sensortec GmbH
boundary Boundary Devices Inc.
brcm Broadcom Corporation
buffalo Buffalo, Inc.
+bticino Bticino International
calxeda Calxeda
capella Capella Microsystems, Inc
cascoda Cascoda, Ltd.
@@ -285,6 +286,7 @@ pine64 Pine64
pixcir PIXCIR MICROELECTRONICS Co., Ltd
plathome Plat'Home Co., Ltd.
plda PLDA
+portwell Portwell Inc.
poslab Poslab Technology Co., Ltd.
powervr PowerVR (deprecated, use img)
probox2 PROBOX2 (by W2COMP Co., Ltd.)