Merge tag 'sound-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "This became again a busy development cycle.  There are few ALSA core
  updates (merely API cleanups and sparse fixes), with the majority of
  other changes are found in ASoC scene.

  Here are some highlights:

  ALSA core:
   - More helper macros for sparse warning fixes (e.g. bitwise types)
   - Slight optimization of PCM OSS locks
   - Make common handling for PCM / compress buffers (for SOF)

  ASoC:
   - Lots of code refactoring and modernization for (still ongoing)
     componentization works
   - Conversion of SND_SOC_ALL_CODECS to use imply
   - Continued refactoring and fixing of the Intel SOF/SST support,
     including the initial (but still incomplete) SoundWire support
   - SoundWire and more advanced clocking support for Realtek RT5682
   - Support for amlogic GX, Meson 8, Meson 8B and T9015 DAC, Broadcom
     DSL/PON, Ingenic JZ4760 and JZ4770, Realtek RL6231, and TI TAS2563
     and TLV320ADCX140

  HD-audio:
   - Optimizations in HDMI jack handling
   - A few new quirks and fixups for Realtek codecs

  USB-audio:
   - Delayed registration support
   - New quirks for Motu, Kingston, Presonus"

* tag 'sound-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (415 commits)
  ALSA: usb-audio: Fix case when USB MIDI interface has more than one extra endpoint descriptor
  Revert "ALSA: uapi: Drop asound.h inclusion from asoc.h"
  ALSA: hda/realtek - Remove now-unnecessary XPS 13 headphone noise fixups
  ALSA: hda/realtek - Set principled PC Beep configuration for ALC256
  ALSA: doc: Document PC Beep Hidden Register on Realtek ALC256
  ALSA: hda/realtek - a fake key event is triggered by running shutup
  ALSA: hda: default enable CA0132 DSP support
  ASoC: amd: acp3x-pcm-dma: clean up two indentation issues
  ASoC: tlv320adcx140: Remove undocumented property
  ASoC: Intel: sof_sdw: Add Volteer support with RT5682 SNDW helper function
  ASoC: Intel: common: add match table for TGL RT5682 SoundWire driver
  ASoC: Intel: boards: add sof_sdw machine driver
  ASoC: Intel: soc-acpi: update topology and driver name for SoundWire platforms
  ASoC: rt5682: move DAI clock registry to I2S mode
  ASoC: pxa: magician: convert to use i2c_new_client_device()
  ASoC: SOF: Intel: hda-ctrl: add reset cycle before parsing capabilities
  Asoc: SOF: Intel: hda: check SoundWire wakeen interrupt in irq thread
  ASoC: SOF: Intel: hda: add WAKEEN interrupt support for SoundWire
  ASoC: SOF: Intel: hda: add parameter to control SoundWire clock stop quirks
  ASoC: SOF: Intel: hda: merge IPC, stream and SoundWire interrupt handlers
  ...

27 files changed, 1128 insertions, 273 deletions

diff --git a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml
new file mode 100644
index 000000000000..a61bccf915d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,aiu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic AIU audio output controller
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+  $nodename:
+    pattern: "^audio-controller@.*"
+
+  "#sound-dai-cells":
+    const: 2
+
+  compatible:
+    items:
+      - enum:
+        - amlogic,aiu-gxbb
+        - amlogic,aiu-gxl
+        - amlogic,aiu-meson8
+        - amlogic,aiu-meson8b
+      - const:
+          amlogic,aiu
+
+  clocks:
+    items:
+      - description: AIU peripheral clock
+      - description: I2S peripheral clock
+      - description: I2S output clock
+      - description: I2S master clock
+      - description: I2S mixer clock
+      - description: SPDIF peripheral clock
+      - description: SPDIF output clock
+      - description: SPDIF master clock
+      - description: SPDIF master clock multiplexer
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: i2s_pclk
+      - const: i2s_aoclk
+      - const: i2s_mclk
+      - const: i2s_mixer
+      - const: spdif_pclk
+      - const: spdif_aoclk
+      - const: spdif_mclk
+      - const: spdif_mclk_sel
+
+  interrupts:
+    items:
+      - description: I2S interrupt line
+      - description: SPDIF interrupt line
+
+  interrupt-names:
+    items:
+      - const: i2s
+      - const: spdif
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - reg
+  - resets
+
+examples:
+  - |
+    #include <dt-bindings/clock/gxbb-clkc.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
+
+    aiu: audio-controller@5400 {
+        compatible = "amlogic,aiu-gxl", "amlogic,aiu";
+        #sound-dai-cells = <2>;
+        reg = <0x0 0x5400 0x0 0x2ac>;
+        interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "i2s", "spdif";
+        clocks = <&clkc CLKID_AIU_GLUE>,
+                 <&clkc CLKID_I2S_OUT>,
+                 <&clkc CLKID_AOCLK_GATE>,
+                 <&clkc CLKID_CTS_AMCLK>,
+                 <&clkc CLKID_MIXER_IFACE>,
+                 <&clkc CLKID_IEC958>,
+                 <&clkc CLKID_IEC958_GATE>,
+                 <&clkc CLKID_CTS_MCLK_I958>,
+                 <&clkc CLKID_CTS_I958>;
+        clock-names = "pclk",
+                      "i2s_pclk",
+                      "i2s_aoclk",
+                      "i2s_mclk",
+                      "i2s_mixer",
+                      "spdif_pclk",
+                      "spdif_aoclk",
+                      "spdif_mclk",
+                      "spdif_mclk_sel";
+        resets = <&reset RESET_AIU>;
+    };
+
diff --git a/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml
new file mode 100644
index 000000000000..f778d3371fde
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,g12a-toacodec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic G12a Internal DAC Control Glue
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+  $nodename:
+    pattern: "^audio-controller@.*"
+
+  "#sound-dai-cells":
+    const: 1
+
+  compatible:
+    oneOf:
+      - items:
+        - const:
+            amlogic,g12a-toacodec
+      - items:
+        - enum:
+          - amlogic,sm1-toacodec
+        - const:
+            amlogic,g12a-toacodec
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - resets
+
+examples:
+  - |
+    #include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h>
+
+    toacodec: audio-controller@740 {
+        compatible = "amlogic,g12a-toacodec";
+        reg = <0x0 0x740 0x0 0x4>;
+        #sound-dai-cells = <1>;
+        resets = <&clkc_audio AUD_RESET_TOACODEC>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
new file mode 100644
index 000000000000..fb374c659be1
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,gx-sound-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic GX sound card
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+  compatible:
+    items:
+      - const: amlogic,gx-sound-card
+
+  audio-aux-devs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: list of auxiliary devices
+
+  audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    minItems: 2
+    description: |-
+      A list of the connections between audio components. Each entry is a
+      pair of strings, the first being the connection's sink, the second
+      being the connection's source.
+
+  audio-widgets:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    minItems: 2
+    description: |-
+      A list off component DAPM widget. Each entry is a pair of strings,
+      the first being the widget type, the second being the widget name
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: User specified audio sound card name
+
+patternProperties:
+  "^dai-link-[0-9]+$":
+    type: object
+    description: |-
+      dai-link child nodes:
+        Container for dai-link level properties and the CODEC sub-nodes.
+        There should be at least one (and probably more) subnode of this type
+
+    properties:
+      dai-format:
+        $ref: /schemas/types.yaml#/definitions/string
+        enum: [ i2s, left-j, dsp_a ]
+
+      mclk-fs:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |-
+          Multiplication factor between the frame rate and master clock
+          rate
+
+      sound-dai:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description: phandle of the CPU DAI
+
+    patternProperties:
+      "^codec-[0-9]+$":
+        type: object
+        description: |-
+          Codecs:
+          dai-link representing backend links should have at least one subnode.
+          One subnode for each codec of the dai-link. dai-link representing
+          frontend links have no codec, therefore have no subnodes
+
+        properties:
+          sound-dai:
+            $ref: /schemas/types.yaml#/definitions/phandle
+            description: phandle of the codec DAI
+
+        required:
+          - sound-dai
+
+    required:
+      - sound-dai
+
+required:
+  - model
+  - dai-link-0
+
+examples:
+  - |
+    sound {
+        compatible = "amlogic,gx-sound-card";
+        model = "GXL-ACME-S905X-FOO";
+        audio-aux-devs = <&amp>;
+        audio-routing = "I2S ENCODER I2S IN", "I2S FIFO Playback";
+
+        dai-link-0 {
+               sound-dai = <&i2s_fifo>;
+        };
+
+        dai-link-1 {
+                sound-dai = <&i2s_encoder>;
+                dai-format = "i2s";
+                mclk-fs = <256>;
+
+                codec-0 {
+                        sound-dai = <&codec0>;
+                };
+
+                codec-1 {
+                        sound-dai = <&codec1>;
+                };
+        };
+    };
+
diff --git a/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml b/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml
new file mode 100644
index 000000000000..b7c38c2b5b54
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,t9015.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic T9015 Internal Audio DAC
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+  $nodename:
+    pattern: "^audio-controller@.*"
+
+  "#sound-dai-cells":
+    const: 0
+
+  compatible:
+    items:
+      - const: amlogic,t9015
+
+  clocks:
+    items:
+      - description: Peripheral clock
+
+  clock-names:
+    items:
+      - const: pclk
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+
+examples:
+  - |
+    #include <dt-bindings/clock/g12a-clkc.h>
+    #include <dt-bindings/reset/amlogic,meson-g12a-reset.h>
+
+    acodec: audio-controller@32000 {
+        compatible = "amlogic,t9015";
+        reg = <0x0 0x32000 0x0 0x14>;
+        #sound-dai-cells = <0>;
+        clocks = <&clkc CLKID_AUDIO_CODEC>;
+        clock-names = "pclk";
+        resets = <&reset RESET_AUDIO_CODEC>;
+    };
+
diff --git a/Documentation/devicetree/bindings/sound/brcm,bcm63xx-audio.txt b/Documentation/devicetree/bindings/sound/brcm,bcm63xx-audio.txt
new file mode 100644
index 000000000000..007f524b4d15
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/brcm,bcm63xx-audio.txt
@@ -0,0 +1,29 @@
+Broadcom DSL/PON BCM63xx Audio I2S controller
+
+Required properties:
+- compatible:     Should be "brcm,bcm63xx-i2s".
+- #address-cells: 32bit valued, 1 cell.
+- #size-cells:    32bit valued, 0 cell.
+- reg:            Should contain audio registers location and length
+- interrupts:     Should contain the interrupt for the controller.
+- clocks:         Must contain an entry for each entry in clock-names.
+                  Please refer to clock-bindings.txt.
+- clock-names:    One of each entry matching the clocks phandles list:
+                  - "i2sclk" (generated clock) Required.
+                  - "i2sosc" (fixed 200MHz clock) Required.
+
+(1) : The generated clock is required only when any of TX and RX
+      works on Master Mode.
+(2) : The fixed 200MHz clock is from internal chip and always on
+
+Example:
+
+		i2s: bcm63xx-i2s {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63xx-i2s";
+			reg = <0xFF802080 0xFF>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&i2sclk>, <&osc>;
+			clock-names = "i2sclk","i2sosc";
+		};
diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml
new file mode 100644
index 000000000000..efce847a3408
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,cs42l51.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CS42L51 audio codec DT bindings
+
+maintainers:
+  - Olivier Moysan <olivier.moysan@st.com>
+
+properties:
+  compatible:
+      const: cirrus,cs42l51
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: MCLK
+
+  reset-gpios:
+    maxItems: 1
+
+  VL-supply:
+    description: phandle to voltage regulator of digital interface section
+
+  VD-supply:
+    description: phandle to voltage regulator of digital internal section
+
+  VA-supply:
+    description: phandle to voltage regulator of analog internal section
+
+  VAHP-supply:
+    description: phandle to voltage regulator of headphone
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c@0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      cs42l51@4a {
+        compatible = "cirrus,cs42l51";
+        reg = <0x4a>;
+        #sound-dai-cells = <0>;
+        clocks = <&mclk_prov>;
+        clock-names = "MCLK";
+        VL-supply = <&reg_audio>;
+        VD-supply = <&reg_audio>;
+        VA-supply = <&reg_audio>;
+        VAHP-supply = <&reg_audio>;
+        reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/sound/cs42l51.txt b/Documentation/devicetree/bindings/sound/cs42l51.txt
deleted file mode 100644
index acbd68ddd2cb..000000000000
--- a/Documentation/devicetree/bindings/sound/cs42l51.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-CS42L51 audio CODEC
-
-Required properties:
-
-  - compatible : "cirrus,cs42l51"
-
-  - reg : the I2C address of the device for I2C.
-
-Optional properties:
-  - VL-supply, VD-supply, VA-supply, VAHP-supply: power supplies for the device,
-    as covered in Documentation/devicetree/bindings/regulator/regulator.txt.
-
-  - reset-gpios : GPIO specification for the reset pin. If specified, it will be
-    deasserted before starting the communication with the codec.
-
-  - clocks : a list of phandles + clock-specifiers, one for each entry in
-    clock-names
-
-  - clock-names : must contain "MCLK"
-
-Example:
-
-cs42l51: cs42l51@4a {
-	compatible = "cirrus,cs42l51";
-	reg = <0x4a>;
-	clocks = <&mclk_prov>;
-	clock-names = "MCLK";
-	VL-supply = <&reg_audio>;
-	VD-supply = <&reg_audio>;
-	VA-supply = <&reg_audio>;
-	VAHP-supply = <&reg_audio>;
-	reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
-};
diff --git a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.txt b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.txt
deleted file mode 100644
index 8ca52dcc5572..000000000000
--- a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-Audio codec controlled by ChromeOS EC
-
-Google's ChromeOS EC codec is a digital mic codec provided by the
-Embedded Controller (EC) and is controlled via a host-command interface.
-
-An EC codec node should only be found as a sub-node of the EC node (see
-Documentation/devicetree/bindings/mfd/cros-ec.txt).
-
-Required properties:
-- compatible: Must contain "google,cros-ec-codec"
-- #sound-dai-cells: Should be 1. The cell specifies number of DAIs.
-
-Optional properties:
-- reg: Pysical base address and length of shared memory region from EC.
-       It contains 3 unsigned 32-bit integer.  The first 2 integers
-       combine to become an unsigned 64-bit physical address.  The last
-       one integer is length of the shared memory.
-- memory-region: Shared memory region to EC.  A "shared-dma-pool".  See
-                 ../reserved-memory/reserved-memory.txt for details.
-
-Example:
-
-{
-	...
-
-	reserved_mem: reserved_mem {
-		compatible = "shared-dma-pool";
-		reg = <0 0x52800000 0 0x100000>;
-		no-map;
-	};
-}
-
-cros-ec@0 {
-	compatible = "google,cros-ec-spi";
-
-	...
-
-	cros_ec_codec: ec-codec {
-		compatible = "google,cros-ec-codec";
-		#sound-dai-cells = <1>;
-		reg = <0x0 0x10500000 0x80000>;
-		memory-region = <&reserved_mem>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
new file mode 100644
index 000000000000..c84e656afb0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/google,cros-ec-codec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Audio codec controlled by ChromeOS EC
+
+maintainers:
+  - Cheng-Yi Chiang <cychiang@chromium.org>
+
+description: |
+  Google's ChromeOS EC codec is a digital mic codec provided by the
+  Embedded Controller (EC) and is controlled via a host-command interface.
+  An EC codec node should only be found as a sub-node of the EC node (see
+  Documentation/devicetree/bindings/mfd/cros-ec.txt).
+
+properties:
+  compatible:
+    const: google,cros-ec-codec
+
+  "#sound-dai-cells":
+    const: 1
+
+  reg:
+    items:
+      - description: |
+          Physical base address and length of shared memory region from EC.
+          It contains 3 unsigned 32-bit integer. The first 2 integers
+          combine to become an unsigned 64-bit physical address.
+          The last one integer is the length of the shared memory.
+
+  memory-region:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description: |
+      Shared memory region to EC.  A "shared-dma-pool".
+      See ../reserved-memory/reserved-memory.txt for details.
+
+required:
+  - compatible
+  - '#sound-dai-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    reserved_mem: reserved-mem@52800000 {
+        compatible = "shared-dma-pool";
+        reg = <0x52800000 0x100000>;
+        no-map;
+    };
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        cros-ec@0 {
+            compatible = "google,cros-ec-spi";
+            #address-cells = <2>;
+            #size-cells = <1>;
+            reg = <0>;
+            cros_ec_codec: ec-codec@10500000 {
+                compatible = "google,cros-ec-codec";
+                #sound-dai-cells = <1>;
+                reg = <0x0 0x10500000 0x80000>;
+                memory-region = <&reserved_mem>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/ingenic,aic.yaml b/Documentation/devicetree/bindings/sound/ingenic,aic.yaml
new file mode 100644
index 000000000000..44f49bebb267
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ingenic,aic.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ingenic,aic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs AC97 / I2S Controller (AIC) DT bindings
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  $nodename:
+    pattern: '^audio-controller@'
+
+  compatible:
+    oneOf:
+      - enum:
+        - ingenic,jz4740-i2s
+        - ingenic,jz4760-i2s
+        - ingenic,jz4770-i2s
+        - ingenic,jz4780-i2s
+      - items:
+        - const: ingenic,jz4725b-i2s
+        - const: ingenic,jz4740-i2s
+
+  '#sound-dai-cells':
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: AIC clock
+      - description: I2S clock
+      - description: EXT clock
+      - description: PLL/2 clock
+
+  clock-names:
+    items:
+      - const: aic
+      - const: i2s
+      - const: ext
+      - const: pll half
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for I2S RX
+      - description: DMA controller phandle and request line for I2S TX
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - '#sound-dai-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/jz4740-cgu.h>
+    aic: audio-controller@10020000 {
+      compatible = "ingenic,jz4740-i2s";
+      reg = <0x10020000 0x38>;
+
+      #sound-dai-cells = <0>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <18>;
+
+      clocks = <&cgu JZ4740_CLK_AIC>,
+               <&cgu JZ4740_CLK_I2S>,
+               <&cgu JZ4740_CLK_EXT>,
+               <&cgu JZ4740_CLK_PLL_HALF>;
+      clock-names = "aic", "i2s", "ext", "pll half";
+
+      dmas = <&dmac 25 0xffffffff>, <&dmac 24 0xffffffff>;
+      dma-names = "rx", "tx";
+    };
diff --git a/Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt b/Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt
deleted file mode 100644
index b623d50004fb..000000000000
--- a/Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Ingenic JZ4740 I2S controller
-
-Required properties:
-- compatible : "ingenic,jz4740-i2s" or "ingenic,jz4780-i2s"
-- reg : I2S registers location and length
-- clocks : AIC and I2S PLL clock specifiers.
-- clock-names: "aic" and "i2s"
-- dmas: DMA controller phandle and DMA request line for I2S Tx and Rx channels
-- dma-names: Must be "tx" and "rx"
-
-Example:
-
-i2s: i2s@10020000 {
-	compatible = "ingenic,jz4740-i2s";
-	reg = <0x10020000 0x94>;
-
-	clocks = <&cgu JZ4740_CLK_AIC>, <&cgu JZ4740_CLK_I2SPLL>;
-	clock-names = "aic", "i2s";
-
-	dmas = <&dma 2>, <&dma 3>;
-	dma-names = "tx", "rx";
-
-};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
index b795d282818d..a8f2b0c56c79 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
@@ -18,6 +18,7 @@ Required properties:
   * Headphone Jack
   * Int Spk
   * Mic Jack
+  * Int Mic
 
 - nvidia,i2s-controller : The phandle of the Tegra I2S1 controller
 - nvidia,audio-codec : The phandle of the WM8903 audio codec
diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.txt b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.txt
index 2469588c7ccb..1ecd75d2032a 100644
--- a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.txt
+++ b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.txt
@@ -10,6 +10,11 @@ Required properties:
 - clock-names: should be "pclk".
 - spk-depop-time-ms: speak depop time msec.
 
+Optional properties:
+
+- mute-gpios: GPIO specifier for external line driver control (typically the
+              dedicated GPIO_MUTE pin)
+
 Example for rk3328 internal codec:
 
 codec: codec@ff410000 {
@@ -18,6 +23,6 @@ codec: codec@ff410000 {
 	rockchip,grf = <&grf>;
 	clocks = <&cru PCLK_ACODEC>;
 	clock-names = "pclk";
+	mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>;
 	spk-depop-time-ms = 100;
-	status = "disabled";
 };
diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
deleted file mode 100644
index 54aefab71f2c..000000000000
--- a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* Rockchip I2S controller
-
-The I2S bus (Inter-IC sound bus) is a serial link for digital
-audio data transfer between devices in the system.
-
-Required properties:
-
-- compatible: should be one of the following:
-   - "rockchip,rk3066-i2s": for rk3066
-   - "rockchip,px30-i2s", "rockchip,rk3066-i2s": for px30
-   - "rockchip,rk3036-i2s", "rockchip,rk3066-i2s": for rk3036
-   - "rockchip,rk3188-i2s", "rockchip,rk3066-i2s": for rk3188
-   - "rockchip,rk3228-i2s", "rockchip,rk3066-i2s": for rk3228
-   - "rockchip,rk3288-i2s", "rockchip,rk3066-i2s": for rk3288
-   - "rockchip,rk3328-i2s", "rockchip,rk3066-i2s": for rk3328
-   - "rockchip,rk3366-i2s", "rockchip,rk3066-i2s": for rk3366
-   - "rockchip,rk3368-i2s", "rockchip,rk3066-i2s": for rk3368
-   - "rockchip,rk3399-i2s", "rockchip,rk3066-i2s": for rk3399
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- interrupts: should contain the I2S interrupt.
-- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
-	Documentation/devicetree/bindings/dma/dma.txt
-- dma-names: should include "tx" and "rx".
-- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names.
-- clock-names: should contain the following:
-   - "i2s_hclk": clock for I2S BUS
-   - "i2s_clk" : clock for I2S controller
-- rockchip,playback-channels: max playback channels, if not set, 8 channels default.
-- rockchip,capture-channels: max capture channels, if not set, 2 channels default.
-
-Required properties for controller which support multi channels
-playback/capture:
-
-- rockchip,grf: the phandle of the syscon node for GRF register.
-
-Example for rk3288 I2S controller:
-
-i2s@ff890000 {
-	compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
-	reg = <0xff890000 0x10000>;
-	interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-	dmas = <&pdma1 0>, <&pdma1 1>;
-	dma-names = "tx", "rx";
-	clock-names = "i2s_hclk", "i2s_clk";
-	clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
-	rockchip,playback-channels = <8>;
-	rockchip,capture-channels = <2>;
-};
diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml
new file mode 100644
index 000000000000..7cd0e278ed85
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/rockchip-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip I2S controller
+
+description:
+  The I2S bus (Inter-IC sound bus) is a serial link for digital
+  audio data transfer between devices in the system.
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,rk3066-i2s
+      - items:
+          - enum:
+            - rockchip,px30-i2s
+            - rockchip,rk3036-i2s
+            - rockchip,rk3188-i2s
+            - rockchip,rk3228-i2s
+            - rockchip,rk3288-i2s
+            - rockchip,rk3328-i2s
+            - rockchip,rk3366-i2s
+            - rockchip,rk3368-i2s
+            - rockchip,rk3399-i2s
+          - const: rockchip,rk3066-i2s
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock for I2S controller
+      - description: clock for I2S BUS
+
+  clock-names:
+    items:
+      - const: i2s_clk
+      - const: i2s_hclk
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  rockchip,capture-channels:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    default: 2
+    description:
+      Max capture channels, if not set, 2 channels default.
+
+  rockchip,playback-channels:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    default: 8
+    description:
+      Max playback channels, if not set, 8 channels default.
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the syscon node for the GRF register.
+      Required property for controllers which support multi channel
+      playback/capture.
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2s@ff890000 {
+      compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
+      reg = <0xff890000 0x10000>;
+      interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>;
+      clock-names = "i2s_clk", "i2s_hclk";
+      dmas = <&pdma1 0>, <&pdma1 1>;
+      dma-names = "tx", "rx";
+      rockchip,capture-channels = <2>;
+      rockchip,playback-channels = <8>;
+      #sound-dai-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/rt5682.txt b/Documentation/devicetree/bindings/sound/rt5682.txt
index 30e927a28369..ade1ece8b45f 100644
--- a/Documentation/devicetree/bindings/sound/rt5682.txt
+++ b/Documentation/devicetree/bindings/sound/rt5682.txt
@@ -32,6 +32,18 @@ Optional properties:
   The delay time is realtek,btndet-delay value multiple of 8.192 ms.
   If absent, the default is 16.
 
+- #clock-cells : Should be set to '<1>',  wclk and bclk sources provided.
+- clock-output-names : Name given for DAI clocks output.
+
+- clocks : phandle and clock specifier for codec MCLK.
+- clock-names : Clock name string for 'clocks' attribute, should be "mclk".
+
+- realtek,dmic-clk-rate-hz : Set the clock rate (hz) for the requirement of
+  the particular DMIC.
+
+- realtek,dmic-delay-ms : Set the delay time (ms) for the requirement of
+  the particular DMIC.
+
 Pins on the device (for linking into audio routes) for RT5682:
 
   * DMIC L1
@@ -53,4 +65,10 @@ rt5682 {
 	realtek,dmic1-clk-pin = <1>;
 	realtek,jd-src = <1>;
 	realtek,btndet-delay = <16>;
+
+	#clock-cells = <1>;
+	clock-output-names = "rt5682-dai-wclk", "rt5682-dai-bclk";
+
+	clocks = <&osc>;
+	clock-names = "mclk";
 };
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt b/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt
deleted file mode 100644
index cbf24bcd1b8d..000000000000
--- a/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-STMicroelectronics STM32 SPI/I2S Controller
-
-The SPI/I2S block supports I2S/PCM protocols when configured on I2S mode.
-Only some SPI instances support I2S.
-
-Required properties:
-  - compatible: Must be "st,stm32h7-i2s"
-  - reg: Offset and length of the device's register set.
-  - interrupts: Must contain the interrupt line id.
-  - clocks: Must contain phandle and clock specifier pairs for each entry
-	in clock-names.
-  - clock-names: Must contain "i2sclk", "pclk", "x8k" and "x11k".
-	"i2sclk": clock which feeds the internal clock generator
-	"pclk": clock which feeds the peripheral bus interface
-	"x8k": I2S parent clock for sampling rates multiple of 8kHz.
-	"x11k": I2S parent clock for sampling rates multiple of 11.025kHz.
-  - dmas: DMA specifiers for tx and rx dma.
-    See Documentation/devicetree/bindings/dma/stm32-dma.txt.
-  - dma-names: Identifier for each DMA request line. Must be "tx" and "rx".
-  - pinctrl-names: should contain only value "default"
-  - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
-
-Optional properties:
-  - resets: Reference to a reset controller asserting the reset controller
-
-The device node should contain one 'port' child node with one child 'endpoint'
-node, according to the bindings defined in Documentation/devicetree/bindings/
-graph.txt.
-
-Example:
-sound_card {
-	compatible = "audio-graph-card";
-	dais = <&i2s2_port>;
-};
-
-i2s2: audio-controller@40003800 {
-	compatible = "st,stm32h7-i2s";
-	reg = <0x40003800 0x400>;
-	interrupts = <36>;
-	clocks = <&rcc PCLK1>, <&rcc SPI2_CK>, <&rcc PLL1_Q>, <&rcc PLL2_P>;
-	clock-names = "pclk", "i2sclk",  "x8k", "x11k";
-	dmas = <&dmamux2 2 39 0x400 0x1>,
-           <&dmamux2 3 40 0x400 0x1>;
-	dma-names = "rx", "tx";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2s2>;
-
-	i2s2_port: port@0 {
-		cpu_endpoint: endpoint {
-			remote-endpoint = <&codec_endpoint>;
-			format = "i2s";
-		};
-	};
-};
-
-audio-codec {
-	codec_port: port@0 {
-		codec_endpoint: endpoint {
-			remote-endpoint = <&cpu_endpoint>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml
new file mode 100644
index 000000000000..f32410890589
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/st,stm32-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 SPI/I2S Controller
+
+maintainers:
+  - Olivier Moysan <olivier.moysan@st.com>
+
+description:
+  The SPI/I2S block supports I2S/PCM protocols when configured on I2S mode.
+  Only some SPI instances support I2S.
+
+properties:
+  compatible:
+    enum:
+      - st,stm32h7-i2s
+
+  "#sound-dai-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock feeding the peripheral bus interface.
+      - description: clock feeding the internal clock generator.
+      - description: I2S parent clock for sampling rates multiple of 8kHz.
+      - description: I2S parent clock for sampling rates multiple of 11.025kHz.
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: i2sclk
+      - const: x8k
+      - const: x11k
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: audio capture DMA.
+      - description: audio playback DMA.
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#sound-dai-cells"
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    i2s2: audio-controller@4000b000 {
+        compatible = "st,stm32h7-i2s";
+        #sound-dai-cells = <0>;
+        reg = <0x4000b000 0x400>;
+        clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+        clock-names = "pclk", "i2sclk", "x8k", "x11k";
+        interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&dmamux1 39 0x400 0x01>,
+               <&dmamux1 40 0x400 0x01>;
+        dma-names = "rx", "tx";
+        pinctrl-names = "default";
+        pinctrl-0 = <&i2s2_pins_a>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt
deleted file mode 100644
index ca9101777c44..000000000000
--- a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-STMicroelectronics STM32 S/PDIF receiver (SPDIFRX).
-
-The SPDIFRX peripheral, is designed to receive an S/PDIF flow compliant with
-IEC-60958 and IEC-61937.
-
-Required properties:
-  - compatible: should be "st,stm32h7-spdifrx"
-  - reg: cpu DAI IP base address and size
-  - clocks: must contain an entry for kclk (used as S/PDIF signal reference)
-  - clock-names: must contain "kclk"
-  - interrupts: cpu DAI interrupt line
-  - dmas: DMA specifiers for audio data DMA and iec control flow DMA
-    See STM32 DMA bindings, Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
-  - dma-names: two dmas have to be defined, "rx" and "rx-ctrl"
-
-Optional properties:
-  - resets: Reference to a reset controller asserting the SPDIFRX
-
-The device node should contain one 'port' child node with one child 'endpoint'
-node, according to the bindings defined in Documentation/devicetree/bindings/
-graph.txt.
-
-Example:
-spdifrx: spdifrx@40004000 {
-	compatible = "st,stm32h7-spdifrx";
-	reg = <0x40004000 0x400>;
-	clocks = <&rcc SPDIFRX_CK>;
-	clock-names = "kclk";
-	interrupts = <97>;
-	dmas = <&dmamux1 2 93 0x400 0x0>,
-	       <&dmamux1 3 94 0x400 0x0>;
-	dma-names = "rx", "rx-ctrl";
-	pinctrl-0 = <&spdifrx_pins>;
-	pinctrl-names = "default";
-
-	spdifrx_port: port {
-		cpu_endpoint: endpoint {
-			remote-endpoint = <&codec_endpoint>;
-		};
-	};
-};
-
-spdif_in: spdif-in {
-	compatible = "linux,spdif-dir";
-
-	codec_port: port {
-		codec_endpoint: endpoint {
-			remote-endpoint = <&cpu_endpoint>;
-		};
-	};
-};
-
-soundcard {
-	compatible = "audio-graph-card";
-	dais = <&spdifrx_port>;
-};
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml
new file mode 100644
index 000000000000..b7f7dc452231
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/st,stm32-spdifrx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 S/PDIF receiver (SPDIFRX)
+
+maintainers:
+  - Olivier Moysan <olivier.moysan@st.com>
+
+description: |
+  The SPDIFRX peripheral, is designed to receive an S/PDIF flow compliant with
+  IEC-60958 and IEC-61937.
+
+properties:
+  compatible:
+    enum:
+      - st,stm32h7-spdifrx
+
+  "#sound-dai-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: kclk
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: audio data capture DMA
+      - description: IEC status bits capture DMA
+
+  dma-names:
+    items:
+      - const: rx
+      - const: rx-ctrl
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#sound-dai-cells"
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    spdifrx: spdifrx@40004000 {
+        compatible = "st,stm32h7-spdifrx";
+        #sound-dai-cells = <0>;
+        reg = <0x40004000 0x400>;
+        clocks = <&rcc SPDIF_K>;
+        clock-names = "kclk";
+        interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&dmamux1 2 93 0x400 0x0>,
+               <&dmamux1 3 94 0x400 0x0>;
+        dma-names = "rx", "rx-ctrl";
+        pinctrl-0 = <&spdifrx_pins>;
+        pinctrl-names = "default";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/tas2562.txt b/Documentation/devicetree/bindings/sound/tas2562.txt
index 658e1fb18a99..94796b547184 100644
--- a/Documentation/devicetree/bindings/sound/tas2562.txt
+++ b/Documentation/devicetree/bindings/sound/tas2562.txt
@@ -8,7 +8,7 @@ real time monitoring of loudspeaker behavior.
 Required properties:
  - #address-cells  - Should be <1>.
  - #size-cells     - Should be <0>.
- - compatible:	   - Should contain "ti,tas2562".
+ - compatible:	   - Should contain "ti,tas2562", "ti,tas2563".
  - reg:		   - The i2c address. Should be 0x4c, 0x4d, 0x4e or 0x4f.
  - ti,imon-slot-no:- TDM TX current sense time slot.
 
diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
new file mode 100644
index 000000000000..ab2268c0ee67
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+# Copyright (C) 2019 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/tlv320adcx140.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TLV320ADCX140 Quad Channel Analog-to-Digital Converter
+
+maintainers:
+  - Dan Murphy <dmurphy@ti.com>
+
+description: |
+  The TLV320ADCX140 are multichannel (4-ch analog recording or 8-ch digital
+  PDM microphones recording), high-performance audio, analog-to-digital
+  converter (ADC) with analog inputs supporting up to 2V RMS. The TLV320ADCX140
+  family supports line and  microphone Inputs, and offers a programmable
+  microphone bias or supply voltage generation.
+
+  Specifications can be found at:
+    http://www.ti.com/lit/ds/symlink/tlv320adc3140.pdf
+    http://www.ti.com/lit/ds/symlink/tlv320adc5140.pdf
+    http://www.ti.com/lit/ds/symlink/tlv320adc6140.pdf
+
+properties:
+  compatible:
+    oneOf:
+      - const: ti,tlv320adc3140
+      - const: ti,tlv320adc5140
+      - const: ti,tlv320adc6140
+
+  reg:
+    maxItems: 1
+    description: |
+       I2C addresss of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f
+
+  reset-gpios:
+    description: |
+       GPIO used for hardware reset.
+
+  areg-supply:
+      description: |
+       Regulator with AVDD at 3.3V.  If not defined then the internal regulator
+       is enabled.
+
+  ti,mic-bias-source:
+    description: |
+       Indicates the source for MIC Bias.
+       0 - Mic bias is set to VREF
+       1 - Mic bias is set to VREF × 1.096
+       6 - Mic bias is set to AVDD
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [0, 1, 6]
+
+  ti,vref-source:
+    description: |
+       Indicates the source for MIC Bias.
+       0 - Set VREF to 2.75V
+       1 - Set VREF to 2.5V
+       2 - Set VREF to 1.375V
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [0, 1, 2]
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      codec: codec@4c {
+        compatible = "ti,tlv320adc5140";
+        reg = <0x4c>;
+        ti,mic-bias-source = <6>;
+        reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+      };
+    };
diff --git a/Documentation/sound/alsa-configuration.rst b/Documentation/sound/alsa-configuration.rst
index 392875a1b94e..72f97d4b01a7 100644
--- a/Documentation/sound/alsa-configuration.rst
+++ b/Documentation/sound/alsa-configuration.rst
@@ -2234,6 +2234,19 @@ use_vmalloc
     buffers.  If mmap is used on such architectures, turn off this
     option, so that the DMA-coherent buffers are allocated and used
     instead.
+delayed_register
+    The option is needed for devices that have multiple streams
+    defined in multiple USB interfaces.  The driver may invoke
+    registrations multiple times (once per interface) and this may
+    lead to the insufficient device enumeration.
+    This option receives an array of strings, and you can pass
+    ID:INTERFACE like ``0123abcd:4`` for performing the delayed
+    registration to the given device.  In this example, when a USB
+    device 0123:abcd is probed, the driver waits the registration
+    until the USB interface 4 gets probed.
+    The driver prints a message like "Found post-registration device
+    assignment: 1234abcd:04" for such a device, so that user can
+    notice the need.
 
 This module supports multiple devices, autoprobe and hotplugging.
 
diff --git a/Documentation/sound/hd-audio/index.rst b/Documentation/sound/hd-audio/index.rst
index f8a72ffffe66..6e12de9fc34e 100644
--- a/Documentation/sound/hd-audio/index.rst
+++ b/Documentation/sound/hd-audio/index.rst
@@ -8,3 +8,4 @@ HD-Audio
    models
    controls
    dp-mst
+   realtek-pc-beep
diff --git a/Documentation/sound/hd-audio/models.rst b/Documentation/sound/hd-audio/models.rst
index 11298f0ce44d..0ea967d34583 100644
--- a/Documentation/sound/hd-audio/models.rst
+++ b/Documentation/sound/hd-audio/models.rst
@@ -216,8 +216,6 @@ alc298-dell-aio
     ALC298 fixups on Dell AIO machines
 alc275-dell-xps
     ALC275 fixups on Dell XPS models
-alc256-dell-xps13
-    ALC256 fixups on Dell XPS13
 lenovo-spk-noise
     Workaround for speaker noise on Lenovo machines
 lenovo-hotkey
diff --git a/Documentation/sound/hd-audio/realtek-pc-beep.rst b/Documentation/sound/hd-audio/realtek-pc-beep.rst
new file mode 100644
index 000000000000..be47c6f76a6e
--- /dev/null
+++ b/Documentation/sound/hd-audio/realtek-pc-beep.rst
@@ -0,0 +1,129 @@
+===============================
+Realtek PC Beep Hidden Register
+===============================
+
+This file documents the "PC Beep Hidden Register", which is present in certain
+Realtek HDA codecs and controls a muxer and pair of passthrough mixers that can
+route audio between pins but aren't themselves exposed as HDA widgets. As far
+as I can tell, these hidden routes are designed to allow flexible PC Beep output
+for codecs that don't have mixer widgets in their output paths. Why it's easier
+to hide a mixer behind an undocumented vendor register than to just expose it
+as a widget, I have no idea.
+
+Register Description
+====================
+
+The register is accessed via processing coefficient 0x36 on NID 20h. Bits not
+identified below have no discernible effect on my machine, a Dell XPS 13 9350::
+
+  MSB                           LSB
+  +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+  | |h|S|L|         | B |R|       | Known bits
+  +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
+  |0|0|1|1|  0x7  |0|0x0|1|  0x7  | Reset value
+  +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+
+1Ah input select (B): 2 bits
+  When zero, expose the PC Beep line (from the internal beep generator, when
+  enabled with the Set Beep Generation verb on NID 01h, or else from the
+  external PCBEEP pin) on the 1Ah pin node. When nonzero, expose the headphone
+  jack (or possibly Line In on some machines) input instead. If PC Beep is
+  selected, the 1Ah boost control has no effect.
+
+Amplify 1Ah loopback, left (L): 1 bit
+  Amplify the left channel of 1Ah before mixing it into outputs as specified
+  by h and S bits. Does not affect the level of 1Ah exposed to other widgets.
+
+Amplify 1Ah loopback, right (R): 1 bit
+  Amplify the right channel of 1Ah before mixing it into outputs as specified
+  by h and S bits. Does not affect the level of 1Ah exposed to other widgets.
+
+Loopback 1Ah to 21h [active low] (h): 1 bit
+  When zero, mix 1Ah (possibly with amplification, depending on L and R bits)
+  into 21h (headphone jack on my machine). Mixed signal respects the mute
+  setting on 21h.
+
+Loopback 1Ah to 14h (S): 1 bit
+  When one, mix 1Ah (possibly with amplification, depending on L and R bits)
+  into 14h (internal speaker on my machine). Mixed signal **ignores** the mute
+  setting on 14h and is present whenever 14h is configured as an output.
+
+Path diagrams
+=============
+
+1Ah input selection (DIV is the PC Beep divider set on NID 01h)::
+
+  <Beep generator>   <PCBEEP pin>    <Headphone jack>
+          |                |                |
+          +--DIV--+--!DIV--+       {1Ah boost control}
+                  |                         |
+                  +--(b == 0)--+--(b != 0)--+
+                               |
+               >1Ah (Beep/Headphone Mic/Line In)<
+
+Loopback of 1Ah to 21h/14h::
+
+               <1Ah (Beep/Headphone Mic/Line In)>
+                               |
+                        {amplify if L/R}
+                               |
+                  +-----!h-----+-----S-----+
+                  |                        |
+          {21h mute control}               |
+                  |                        |
+          >21h (Headphone)<     >14h (Internal Speaker)<
+
+Background
+==========
+
+All Realtek HDA codecs have a vendor-defined widget with node ID 20h which
+provides access to a bank of registers that control various codec functions.
+Registers are read and written via the standard HDA processing coefficient
+verbs (Set/Get Coefficient Index, Set/Get Processing Coefficient). The node is
+named "Realtek Vendor Registers" in public datasheets' verb listings and,
+apart from that, is entirely undocumented.
+
+This particular register, exposed at coefficient 0x36 and named in commits from
+Realtek, is of note: unlike most registers, which seem to control detailed
+amplifier parameters not in scope of the HDA specification, it controls audio
+routing which could just as easily have been defined using standard HDA mixer
+and selector widgets.
+
+Specifically, it selects between two sources for the input pin widget with Node
+ID (NID) 1Ah: the widget's signal can come either from an audio jack (on my
+laptop, a Dell XPS 13 9350, it's the headphone jack, but comments in Realtek
+commits indicate that it might be a Line In on some machines) or from the PC
+Beep line (which is itself multiplexed between the codec's internal beep
+generator and external PCBEEP pin, depending on if the beep generator is
+enabled via verbs on NID 01h). Additionally, it can mix (with optional
+amplification) that signal onto the 21h and/or 14h output pins.
+
+The register's reset value is 0x3717, corresponding to PC Beep on 1Ah that is
+then amplified and mixed into both the headphones and the speakers. Not only
+does this violate the HDA specification, which says that "[a vendor defined
+beep input pin] connection may be maintained *only* while the Link reset
+(**RST#**) is asserted", it means that we cannot ignore the register if we care
+about the input that 1Ah would otherwise expose or if the PCBEEP trace is
+poorly shielded and picks up chassis noise (both of which are the case on my
+machine).
+
+Unfortunately, there are lots of ways to get this register configuration wrong.
+Linux, it seems, has gone through most of them. For one, the register resets
+after S3 suspend: judging by existing code, this isn't the case for all vendor
+registers, and it's led to some fixes that improve behavior on cold boot but
+don't last after suspend. Other fixes have successfully switched the 1Ah input
+away from PC Beep but have failed to disable both loopback paths. On my
+machine, this means that the headphone input is amplified and looped back to
+the headphone output, which uses the exact same pins! As you might expect, this
+causes terrible headphone noise, the character of which is controlled by the
+1Ah boost control. (If you've seen instructions online to fix XPS 13 headphone
+noise by changing "Headphone Mic Boost" in ALSA, now you know why.)
+
+The information here has been obtained through black-box reverse engineering of
+the ALC256 codec's behavior and is not guaranteed to be correct. It likely
+also applies for the ALC255, ALC257, ALC235, and ALC236, since those codecs
+seem to be close relatives of the ALC256. (They all share one initialization
+function.) Additionally, other codecs like the ALC225 and ALC285 also have this
+register, judging by existing fixups in ``patch_realtek.c``, but specific
+data (e.g. node IDs, bit positions, pin mappings) for those codecs may differ
+from what I've described here.
diff --git a/Documentation/sound/soc/codec-to-codec.rst b/Documentation/sound/soc/codec-to-codec.rst
index 810109d7500d..4eaa9a0c41fc 100644
--- a/Documentation/sound/soc/codec-to-codec.rst
+++ b/Documentation/sound/soc/codec-to-codec.rst
@@ -104,5 +104,10 @@ Make sure to name your corresponding cpu and codec playback and capture
 dai names ending with "Playback" and "Capture" respectively as dapm core
 will link and power those dais based on the name.
 
-Note that in current device tree there is no way to mark a dai_link
-as codec to codec. However, it may change in future.
+A dai_link in a "simple-audio-card" will automatically be detected as
+codec to codec when all DAIs on the link belong to codec components.
+The dai_link will be initialized with the subset of stream parameters
+(channels, format, sample rate) supported by all DAIs on the link. Since
+there is no way to provide these parameters in the device tree, this is
+mostly useful for communication with simple fixed-function codecs, such
+as a Bluetooth controller or cellular modem.