summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2019-09-16 14:02:43 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2019-09-16 14:02:43 -0700
commitaa62325dc38de2be8b1c27eb180ad3751b3f58ec (patch)
treea95691be94ab37128f6aaddcf526d5c9ad2336ff /Documentation
parentc4d11ccb2b5cec6cdef7aeeb0017473d23031d96 (diff)
parentb769c5ba8aedc395ed04abe6db84a556d28beec1 (diff)
Merge tag 'spi-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown: "The big theme for this release has been performance, we've had a series of unrelated overhauls of a few drivers all with a big peformance component. Otherwise it's been relatively quiet, highlights include: - A big overhaul of the spi-fsl-dspi driver improving the code quality, performance and stability from Vladimir Oltean. - A big performance enhancement for the bc2835 (Raspberry Pi) driver for unidirectional transfers from Lukas Wunner. - Improved performance on small transfers for the uniphier driver from Keiji Hayashibara. - Lots of coccinelle generated cleanups from Yue Haibing. - New device support for Freescale ls2080a and Nuvoton NPCM FIU" * tag 'spi-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (102 commits) spi: mediatek: support large PA spi: mediatek: add spi support for mt6765 IC dt-bindings: spi: update bindings for MT6765 SoC spi: bcm2835: Speed up RX-only DMA transfers by zero-filling TX FIFO spi: bcm2835: Speed up TX-only DMA transfers by clearing RX FIFO dmaengine: bcm2835: Avoid accessing memory when copying zeroes spi: bcm2835: Cache CS register value for ->prepare_message() dmaengine: bcm2835: Document struct bcm2835_dmadev spi: Guarantee cacheline alignment of driver-private data dmaengine: bcm2835: Allow reusable descriptors dmaengine: bcm2835: Allow cyclic transactions without interrupt spi: bcm2835: Drop dma_pending flag spi: bcm2835: Work around DONE bit erratum spi-gpio: Use PTR_ERR_OR_ZERO() in spi_gpio_request() spi: Use an abbreviated pointer to ctlr->cur_msg in __spi_pump_messages spi: npcm-fiu: remove set but not used variable 'retlen' spi: fsl-spi: use devm_platform_ioremap_resource() to simplify code spi: zynq-qspi: use devm_platform_ioremap_resource() to simplify code spi: zynqmp: use devm_platform_ioremap_resource() to simplify code spi: xlp: use devm_platform_ioremap_resource() to simplify code ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt47
-rw-r--r--Documentation/devicetree/bindings/spi/spi-controller.yaml2
-rw-r--r--Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt9
-rw-r--r--Documentation/devicetree/bindings/spi/spi-mt65xx.txt1
-rw-r--r--Documentation/devicetree/bindings/spi/spi-sprd-adi.txt11
5 files changed, 63 insertions, 7 deletions
diff --git a/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt b/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt
new file mode 100644
index 000000000000..a388005842ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt
@@ -0,0 +1,47 @@
+* Nuvoton FLASH Interface Unit (FIU) SPI Controller
+
+NPCM FIU supports single, dual and quad communication interface.
+
+The NPCM7XX supports three FIU modules,
+FIU0 and FIUx supports two chip selects,
+FIU3 support four chip select.
+
+Required properties:
+ - compatible : "nuvoton,npcm750-fiu" for the NPCM7XX BMC
+ - #address-cells : should be 1.
+ - #size-cells : should be 0.
+ - reg : the first contains the register location and length,
+ the second contains the memory mapping address and length
+ - reg-names: Should contain the reg names "control" and "memory"
+ - clocks : phandle of FIU reference clock.
+
+Required properties in case the pins can be muxed:
+ - pinctrl-names : a pinctrl state named "default" must be defined.
+ - pinctrl-0 : phandle referencing pin configuration of the device.
+
+Optional property:
+ - nuvoton,spix-mode: enable spix-mode for an expansion bus to an ASIC or CPLD.
+
+Aliases:
+- All the FIU controller nodes should be represented in the aliases node using
+ the following format 'fiu{n}' where n is a unique number for the alias.
+ In the NPCM7XX BMC:
+ fiu0 represent fiu 0 controller
+ fiu1 represent fiu 3 controller
+ fiu2 represent fiu x controller
+
+Example:
+fiu3: spi@c00000000 {
+ compatible = "nuvoton,npcm750-fiu";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfb000000 0x1000>, <0x80000000 0x10000000>;
+ reg-names = "control", "memory";
+ clocks = <&clk NPCM7XX_CLK_AHB>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi3_pins>;
+ spi-nor@0 {
+ ...
+ };
+};
+
diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml
index a02e2fe2bfb2..732339275848 100644
--- a/Documentation/devicetree/bindings/spi/spi-controller.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml
@@ -31,7 +31,7 @@ properties:
If that property is used, the number of chip selects will be
increased automatically with max(cs-gpios, hardware chip selects).
- So if, for example, the controller has 2 CS lines, and the
+ So if, for example, the controller has 4 CS lines, and the
cs-gpios looks like this
cs-gpios = <&gpio1 0 0>, <0>, <&gpio1 1 0>, <&gpio1 2 0>;
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt
index e8f1d627d288..69dc5d57b1ef 100644
--- a/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt
@@ -3,9 +3,8 @@
Required properties:
- compatible : Should be "fsl,vf610-qspi", "fsl,imx6sx-qspi",
"fsl,imx7d-qspi", "fsl,imx6ul-qspi",
- "fsl,ls1021a-qspi"
+ "fsl,ls1021a-qspi", "fsl,ls2080a-qspi"
or
- "fsl,ls2080a-qspi" followed by "fsl,ls1021a-qspi",
"fsl,ls1043a-qspi" followed by "fsl,ls1021a-qspi"
- reg : the first contains the register location and length,
the second contains the memory mapping address and length
@@ -34,7 +33,11 @@ qspi0: quadspi@40044000 {
clock-names = "qspi_en", "qspi";
flash0: s25fl128s@0 {
- ....
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25fl128s", "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
};
};
diff --git a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
index c0f6c8ecfa2e..3a8079eb18c8 100644
--- a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
+++ b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
@@ -5,6 +5,7 @@ Required properties:
- mediatek,mt2701-spi: for mt2701 platforms
- mediatek,mt2712-spi: for mt2712 platforms
- mediatek,mt6589-spi: for mt6589 platforms
+ - mediatek,mt6765-spi: for mt6765 platforms
- mediatek,mt7622-spi: for mt7622 platforms
- "mediatek,mt7629-spi", "mediatek,mt7622-spi": for mt7629 platforms
- mediatek,mt8135-spi: for mt8135 platforms
diff --git a/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt b/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt
index 8de589b376ce..2567c829e2dc 100644
--- a/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt
@@ -25,18 +25,23 @@ data by ADI software channels at the same time, or two parallel routine of setti
ADI registers will make ADI controller registers chaos to lead incorrect results.
Then we need one hardware spinlock to synchronize between the multiple subsystems.
+The new version ADI controller supplies multiple master channels for different
+subsystem accessing, that means no need to add hardware spinlock to synchronize,
+thus change the hardware spinlock support to be optional to keep backward
+compatibility.
+
Required properties:
- compatible: Should be "sprd,sc9860-adi".
- reg: Offset and length of ADI-SPI controller register space.
-- hwlocks: Reference to a phandle of a hwlock provider node.
-- hwlock-names: Reference to hwlock name strings defined in the same order
- as the hwlocks, should be "adi".
- #address-cells: Number of cells required to define a chip select address
on the ADI-SPI bus. Should be set to 1.
- #size-cells: Size of cells required to define a chip select address size
on the ADI-SPI bus. Should be set to 0.
Optional properties:
+- hwlocks: Reference to a phandle of a hwlock provider node.
+- hwlock-names: Reference to hwlock name strings defined in the same order
+ as the hwlocks, should be "adi".
- sprd,hw-channels: This is an array of channel values up to 49 channels.
The first value specifies the hardware channel id which is used to
transfer data triggered by hardware automatically, and the second