diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2025-01-27 16:29:16 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2025-01-27 16:29:16 -0800 |
| commit | cc8b10fa70682218c2a318fc44f71f3175a23cc0 (patch) | |
| tree | 0f96045c507d390d346726f89e4a906b1e18d8f1 /Documentation | |
| parent | 078eac2b5ba3532ad3ded7c4aa10df8712722c50 (diff) | |
| parent | 70cd0576aa39c55aabd227851cba0c601e811fb6 (diff) | |
Merge tag 'usb-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver updates from Greg KH:
"Here is the USB and Thunderbolt driver updates for 6.14-rc1. Nothing
huge in here, just lots of new hardware support and updates for
existing drivers. Changes here are:
- big gadget f_tcm driver update
- other gadget driver updates and fixes
- thunderbolt driver updates for new hardware and capabilities and
lots more debugging functionality to handle it when things aren't
working well.
- xhci driver updates
- new USB-serial device updates
- typec driver updates, including a chrome platform driver (acked by
the subsystem maintainers)
- other small driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (123 commits)
usb: hcd: Bump local buffer size in rh_string()
Revert "usb: gadget: u_serial: Disable ep before setting port to null to fix the crash caused by port being null"
usb: typec: tcpci: Prevent Sink disconnection before vPpsShutdown in SPR PPS
usb: xhci: tegra: Fix OF boolean read warning
usb: host: xhci-plat: add support compatible ID PNP0D15
usb: typec: ucsi: Add a macro definition for UCSI v1.0
usb: dwc3: core: Defer the probe until USB power supply ready
usbip: Correct format specifier for seqnum from %d to %u
usbip: Fix seqnum sign extension issue in vhci_tx_urb
dt-bindings: usb: snps,dwc3: Split core description
usb: quirks: Add NO_LPM quirk for TOSHIBA TransMemory-Mx device
usb: dwc3: gadget: Reinitiate stream for all host NoStream behavior
USB: Use str_enable_disable-like helpers
USB: gadget: Use str_enable_disable-like helpers
USB: phy: Use str_enable_disable-like helpers
USB: typec: Use str_enable_disable-like helpers
USB: host: Use str_enable_disable-like helpers
USB: Replace own str_plural with common one
USB: serial: quatech2: fix null-ptr-deref in qt2_process_read_urb()
usb: phy: Remove API devm_usb_put_phy()
...
Diffstat (limited to 'Documentation')
24 files changed, 608 insertions, 563 deletions
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml index 67700440e23b..11e40d225b9f 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -293,6 +293,13 @@ properties: PD negotiation till BC1.2 detection completes. default: 0 + pd-revision: + description: Specifies the maximum USB PD revision and version supported by + the connector. This property is specified in the following order; + <revision_major, revision_minor, version_major, version_minor>. + $ref: /schemas/types.yaml#/definitions/uint8-array + maxItems: 4 + dependencies: sink-vdos-v1: [ sink-vdos ] sink-vdos: [ sink-vdos-v1 ] diff --git a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml index a86bcd95100e..7f22f9c031b2 100644 --- a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml +++ b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml @@ -113,27 +113,27 @@ examples: - | #include <dt-bindings/clock/aspeed-clock.h> vhub: usb-vhub@1e6a0000 { - compatible = "aspeed,ast2500-usb-vhub"; - reg = <0x1e6a0000 0x300>; - interrupts = <5>; - clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; - aspeed,vhub-downstream-ports = <5>; - aspeed,vhub-generic-endpoints = <15>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb2ad_default>; - - vhub-vendor-id = <0x1d6b>; - vhub-product-id = <0x0107>; - vhub-device-revision = <0x0100>; - vhub-strings { - #address-cells = <1>; - #size-cells = <0>; - - string@409 { - reg = <0x409>; - manufacturer = "ASPEED"; - product = "USB Virtual Hub"; - serial-number = "0000"; - }; + compatible = "aspeed,ast2500-usb-vhub"; + reg = <0x1e6a0000 0x300>; + interrupts = <5>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + aspeed,vhub-downstream-ports = <5>; + aspeed,vhub-generic-endpoints = <15>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2ad_default>; + + vhub-vendor-id = <0x1d6b>; + vhub-product-id = <0x0107>; + vhub-device-revision = <0x0100>; + vhub-strings { + #address-cells = <1>; + #size-cells = <0>; + + string@409 { + reg = <0x409>; + manufacturer = "ASPEED"; + product = "USB Virtual Hub"; + serial-number = "0000"; }; + }; }; diff --git a/Documentation/devicetree/bindings/usb/brcm,bdc.yaml b/Documentation/devicetree/bindings/usb/brcm,bdc.yaml index 9e561fee98f1..f9375c69e86b 100644 --- a/Documentation/devicetree/bindings/usb/brcm,bdc.yaml +++ b/Documentation/devicetree/bindings/usb/brcm,bdc.yaml @@ -41,10 +41,10 @@ additionalProperties: false examples: - | - usb@f0b02000 { - compatible = "brcm,bdc-udc-v2"; - reg = <0xf0b02000 0xfc4>; - interrupts = <0x0 0x60 0x0>; - phys = <&usbphy_0 0x0>; - clocks = <&sw_usbd>; - }; + usb@f0b02000 { + compatible = "brcm,bdc-udc-v2"; + reg = <0xf0b02000 0xfc4>; + interrupts = <0x0 0x60 0x0>; + phys = <&usbphy_0 0x0>; + clocks = <&sw_usbd>; + }; diff --git a/Documentation/devicetree/bindings/usb/cypress,hx3.yaml b/Documentation/devicetree/bindings/usb/cypress,hx3.yaml index e44e88d993d0..1033b7a4b8f9 100644 --- a/Documentation/devicetree/bindings/usb/cypress,hx3.yaml +++ b/Documentation/devicetree/bindings/usb/cypress,hx3.yaml @@ -56,21 +56,21 @@ examples: /* 2.0 hub on port 1 */ hub_2_0: hub@1 { - compatible = "usb4b4,6504"; - reg = <1>; - peer-hub = <&hub_3_0>; - reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; - vdd-supply = <®_1v2_usb>; - vdd2-supply = <®_3v3_usb>; + compatible = "usb4b4,6504"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + vdd-supply = <®_1v2_usb>; + vdd2-supply = <®_3v3_usb>; }; /* 3.0 hub on port 2 */ hub_3_0: hub@2 { - compatible = "usb4b4,6506"; - reg = <2>; - peer-hub = <&hub_2_0>; - reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; - vdd-supply = <®_1v2_usb>; - vdd2-supply = <®_3v3_usb>; + compatible = "usb4b4,6506"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + vdd-supply = <®_1v2_usb>; + vdd2-supply = <®_3v3_usb>; }; }; diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml index a5f2e3442a0e..e83d30a91b88 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.yaml +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml @@ -192,7 +192,7 @@ unevaluatedProperties: false examples: - | - usb@101c0000 { + usb@101c0000 { compatible = "rockchip,rk3066-usb", "snps,dwc2"; reg = <0x10180000 0x40000>; interrupts = <18>; @@ -200,6 +200,6 @@ examples: clock-names = "otg"; phys = <&usbphy>; phy-names = "usb2-phy"; - }; + }; ... diff --git a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml index 8b25b9a01ced..e3a7df91f7f1 100644 --- a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml +++ b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml @@ -87,21 +87,21 @@ examples: #size-cells = <0>; typec-mux@42 { - compatible = "fcs,fsa4480"; - reg = <0x42>; + compatible = "fcs,fsa4480"; + reg = <0x42>; - interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>; - vcc-supply = <&vreg_bob>; + vcc-supply = <&vreg_bob>; - mode-switch; - orientation-switch; + mode-switch; + orientation-switch; - port { - fsa4480_ept: endpoint { - remote-endpoint = <&typec_controller>; + port { + fsa4480_ept: endpoint { + remote-endpoint = <&typec_controller>; + }; }; - }; }; }; ... diff --git a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml index 8a5f837eff94..e588514fab2d 100644 --- a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml +++ b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml @@ -20,6 +20,7 @@ properties: items: - enum: - nxp,cbdtu02043 + - onnn,fsusb42 - onnn,fsusb43l10x - pericom,pi3usb102 - ti,tmuxhs4212 diff --git a/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml b/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml index d3511f48cd55..1a75544a8c31 100644 --- a/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml @@ -58,20 +58,20 @@ examples: #define KEEM_BAY_A53_AUX_USB_SUSPEND usb { - compatible = "intel,keembay-dwc3"; - clocks = <&scmi_clk KEEM_BAY_A53_AUX_USB>, - <&scmi_clk KEEM_BAY_A53_AUX_USB_REF>, - <&scmi_clk KEEM_BAY_A53_AUX_USB_ALT_REF>, - <&scmi_clk KEEM_BAY_A53_AUX_USB_SUSPEND>; - clock-names = "async_master", "ref", "alt_ref", "suspend"; - ranges; - #address-cells = <1>; - #size-cells = <1>; - - usb@34000000 { - compatible = "snps,dwc3"; - reg = <0x34000000 0x10000>; - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; - dr_mode = "peripheral"; - }; + compatible = "intel,keembay-dwc3"; + clocks = <&scmi_clk KEEM_BAY_A53_AUX_USB>, + <&scmi_clk KEEM_BAY_A53_AUX_USB_REF>, + <&scmi_clk KEEM_BAY_A53_AUX_USB_ALT_REF>, + <&scmi_clk KEEM_BAY_A53_AUX_USB_SUSPEND>; + clock-names = "async_master", "ref", "alt_ref", "suspend"; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + usb@34000000 { + compatible = "snps,dwc3"; + reg = <0x34000000 0x10000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "peripheral"; + }; }; diff --git a/Documentation/devicetree/bindings/usb/ite,it5205.yaml b/Documentation/devicetree/bindings/usb/ite,it5205.yaml index 36ec4251b5f2..889710733de5 100644 --- a/Documentation/devicetree/bindings/usb/ite,it5205.yaml +++ b/Documentation/devicetree/bindings/usb/ite,it5205.yaml @@ -54,19 +54,19 @@ examples: #size-cells = <0>; typec-mux@48 { - compatible = "ite,it5205"; - reg = <0x48>; + compatible = "ite,it5205"; + reg = <0x48>; - mode-switch; - orientation-switch; + mode-switch; + orientation-switch; - vcc-supply = <&mt6359_vibr_ldo_reg>; + vcc-supply = <&mt6359_vibr_ldo_reg>; - port { - it5205_usbss_sbu: endpoint { - remote-endpoint = <&typec_controller>; + port { + it5205_usbss_sbu: endpoint { + remote-endpoint = <&typec_controller>; + }; }; - }; }; }; ... diff --git a/Documentation/devicetree/bindings/usb/maxim,max33359.yaml b/Documentation/devicetree/bindings/usb/maxim,max33359.yaml index 20b62228371b..3de4dc40b791 100644 --- a/Documentation/devicetree/bindings/usb/maxim,max33359.yaml +++ b/Documentation/devicetree/bindings/usb/maxim,max33359.yaml @@ -13,8 +13,12 @@ description: Maxim TCPCI Type-C PD controller properties: compatible: - enum: - - maxim,max33359 + oneOf: + - enum: + - maxim,max33359 + - items: + - const: maxim,max77759-tcpci + - const: maxim,max33359 reg: maxItems: 1 @@ -70,6 +74,7 @@ examples: PDO_FIXED_DUAL_ROLE) PDO_FIXED(9000, 2000, 0)>; sink-bc12-completion-time-ms = <500>; + pd-revision = /bits/ 8 <0x03 0x01 0x01 0x08>; }; }; }; diff --git a/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml b/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml index 8e0f4ecc010d..6edb1fc5044e 100644 --- a/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml +++ b/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml @@ -50,18 +50,18 @@ additionalProperties: false examples: - | - #include <dt-bindings/gpio/gpio.h> - #include <dt-bindings/interrupt-controller/irq.h> - spi { - #address-cells = <1>; - #size-cells = <0>; + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; - udc@0 { - compatible = "maxim,max3420-udc"; - reg = <0>; - interrupt-parent = <&gpio>; - interrupts = <0 IRQ_TYPE_EDGE_FALLING>, <10 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "udc", "vbus"; - spi-max-frequency = <12500000>; - }; - }; + udc@0 { + compatible = "maxim,max3420-udc"; + reg = <0>; + interrupt-parent = <&gpio>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>, <10 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "udc", "vbus"; + spi-max-frequency = <12500000>; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra210-xusb.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra210-xusb.yaml index 90296613b3a5..c0e313c70bba 100644 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra210-xusb.yaml +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra210-xusb.yaml @@ -189,7 +189,7 @@ examples: #size-cells = <0>; ethernet@1 { - compatible = "usb955,9ff"; - reg = <1>; + compatible = "usb955,9ff"; + reg = <1>; }; }; diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index 2622a1f3bcab..a2b3cf625e5b 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -27,6 +27,7 @@ properties: - qcom,msm8998-dwc3 - qcom,qcm2290-dwc3 - qcom,qcs404-dwc3 + - qcom,qcs615-dwc3 - qcom,qcs8300-dwc3 - qcom,qdu1000-dwc3 - qcom,sa8775p-dwc3 @@ -342,6 +343,7 @@ allOf: contains: enum: - qcom,qcm2290-dwc3 + - qcom,qcs615-dwc3 - qcom,sar2130p-dwc3 - qcom,sc8180x-dwc3 - qcom,sc8180x-dwc3-mp @@ -454,8 +456,10 @@ allOf: then: properties: interrupts: + minItems: 3 maxItems: 4 interrupt-names: + minItems: 3 items: - const: pwr_event - const: dp_hs_phy_irq @@ -470,6 +474,7 @@ allOf: - qcom,ipq4019-dwc3 - qcom,ipq8064-dwc3 - qcom,msm8994-dwc3 + - qcom,qcs615-dwc3 - qcom,qcs8300-dwc3 - qcom,qdu1000-dwc3 - qcom,sa8775p-dwc3 diff --git a/Documentation/devicetree/bindings/usb/renesas,rzv2m-usb3drd.yaml b/Documentation/devicetree/bindings/usb/renesas,rzv2m-usb3drd.yaml index ff625600d9af..b87e139c29e5 100644 --- a/Documentation/devicetree/bindings/usb/renesas,rzv2m-usb3drd.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,rzv2m-usb3drd.yaml @@ -104,26 +104,26 @@ examples: #size-cells = <1>; usb3host: usb@85060000 { - compatible = "renesas,r9a09g011-xhci", - "renesas,rzv2m-xhci"; - reg = <0x85060000 0x2000>; - interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_H>, - <&cpg CPG_MOD R9A09G011_USB_PCLK>; - clock-names = "axi", "reg"; - power-domains = <&cpg>; - resets = <&cpg R9A09G011_USB_ARESETN_H>; + compatible = "renesas,r9a09g011-xhci", + "renesas,rzv2m-xhci"; + reg = <0x85060000 0x2000>; + interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_H>, + <&cpg CPG_MOD R9A09G011_USB_PCLK>; + clock-names = "axi", "reg"; + power-domains = <&cpg>; + resets = <&cpg R9A09G011_USB_ARESETN_H>; }; usb3peri: usb3peri@85070000 { - compatible = "renesas,r9a09g011-usb3-peri", - "renesas,rzv2m-usb3-peri"; - reg = <0x85070000 0x400>; - interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_P>, - <&cpg CPG_MOD R9A09G011_USB_PCLK>; - clock-names = "axi", "reg"; - power-domains = <&cpg>; - resets = <&cpg R9A09G011_USB_ARESETN_P>; + compatible = "renesas,r9a09g011-usb3-peri", + "renesas,rzv2m-usb3-peri"; + reg = <0x85070000 0x400>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_P>, + <&cpg CPG_MOD R9A09G011_USB_PCLK>; + clock-names = "axi", "reg"; + power-domains = <&cpg>; + resets = <&cpg R9A09G011_USB_ARESETN_P>; }; }; diff --git a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml index b2b811a0ade8..4e56e4ffeaf2 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml @@ -132,19 +132,19 @@ examples: usb-role-switch; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - usb3_hs_ep: endpoint { - remote-endpoint = <&hs_ep>; - }; + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + usb3_hs_ep: endpoint { + remote-endpoint = <&hs_ep>; }; - port@1 { - reg = <1>; - usb3_role_switch: endpoint { - remote-endpoint = <&hd3ss3220_out_ep>; - }; + }; + port@1 { + reg = <1>; + usb3_role_switch: endpoint { + remote-endpoint = <&hd3ss3220_out_ep>; }; + }; }; }; diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml index b23ef29bf794..980f325341d4 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml @@ -26,6 +26,7 @@ properties: - renesas,usbhs-r9a07g043 # RZ/G2UL and RZ/Five - renesas,usbhs-r9a07g044 # RZ/G2{L,LC} - renesas,usbhs-r9a07g054 # RZ/V2L + - renesas,usbhs-r9a08g045 # RZ/G3S - const: renesas,rzg2l-usbhs - items: @@ -130,6 +131,7 @@ allOf: - renesas,usbhs-r9a07g043 - renesas,usbhs-r9a07g044 - renesas,usbhs-r9a07g054 + - renesas,usbhs-r9a08g045 then: properties: interrupts: diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3-common.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3-common.yaml new file mode 100644 index 000000000000..c956053fd036 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/snps,dwc3-common.yaml @@ -0,0 +1,415 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/snps,dwc3-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare USB3 Controller common properties + +maintainers: + - Felipe Balbi <balbi@kernel.org> + +description: + Defines the properties of the DWC3 core as being embedded in either an + vendor-specific implementation or as a standalone component. + +allOf: + - $ref: usb-drd.yaml# + - if: + properties: + dr_mode: + const: peripheral + + required: + - dr_mode + then: + $ref: usb.yaml# + else: + $ref: usb-xhci.yaml# + +properties: + extcon: + maxItems: 1 + deprecated: true + + usb-phy: + minItems: 1 + items: + - description: USB2/HS PHY + - description: USB3/SS PHY + + phys: + minItems: 1 + maxItems: 19 + + phy-names: + minItems: 1 + maxItems: 19 + oneOf: + - items: + enum: [ usb2-phy, usb3-phy ] + - items: + pattern: "^usb(2-([0-9]|1[0-4])|3-[0-3])$" + + snps,usb2-lpm-disable: + description: Indicate if we don't want to enable USB2 HW LPM for host + mode. + type: boolean + + snps,usb3_lpm_capable: + description: Determines if platform is USB3 LPM capable + type: boolean + + snps,usb2-gadget-lpm-disable: + description: Indicate if we don't want to enable USB2 HW LPM for gadget + mode. + type: boolean + + snps,dis-start-transfer-quirk: + description: + When set, disable isoc START TRANSFER command failure SW work-around + for DWC_usb31 version 1.70a-ea06 and prior. + type: boolean + + snps,disable_scramble_quirk: + description: + True when SW should disable data scrambling. Only really useful for FPGA + builds. + type: boolean + + snps,has-lpm-erratum: + description: True when DWC3 was configured with LPM Erratum enabled + type: boolean + + snps,lpm-nyet-threshold: + description: LPM NYET threshold + $ref: /schemas/types.yaml#/definitions/uint8 + + snps,u2exit_lfps_quirk: + description: Set if we want to enable u2exit lfps quirk + type: boolean + + snps,u2ss_inp3_quirk: + description: Set if we enable P3 OK for U2/SS Inactive quirk + type: boolean + + snps,req_p1p2p3_quirk: + description: + When set, the core will always request for P1/P2/P3 transition sequence. + type: boolean + + snps,del_p1p2p3_quirk: + description: + When set core will delay P1/P2/P3 until a certain amount of 8B10B errors + occur. + type: boolean + + snps,del_phy_power_chg_quirk: + description: When set core will delay PHY power change from P0 to P1/P2/P3. + type: boolean + + snps,lfps_filter_quirk: + description: When set core will filter LFPS reception. + type: boolean + + snps,rx_detect_poll_quirk: + description: + when set core will disable a 400us delay to start Polling LFPS after + RX.Detect. + type: boolean + + snps,tx_de_emphasis_quirk: + description: When set core will set Tx de-emphasis value + type: boolean + + snps,tx_de_emphasis: + description: + The value driven to the PHY is controlled by the LTSSM during USB3 + Compliance mode. + $ref: /schemas/types.yaml#/definitions/uint8 + enum: + - 0 # -6dB de-emphasis + - 1 # -3.5dB de-emphasis + - 2 # No de-emphasis + + snps,dis_u3_susphy_quirk: + description: When set core will disable USB3 suspend phy + type: boolean + + snps,dis_u2_susphy_quirk: + description: When set core will disable USB2 suspend phy + type: boolean + + snps,dis_enblslpm_quirk: + description: + When set clears the enblslpm in GUSB2PHYCFG, disabling the suspend signal + to the PHY. + type: boolean + + snps,dis-u1-entry-quirk: + description: Set if link entering into U1 needs to be disabled + type: boolean + + snps,dis-u2-entry-quirk: + description: Set if link entering into U2 needs to be disabled + type: boolean + + snps,dis_rxdet_inp3_quirk: + description: + When set core will disable receiver detection in PHY P3 power state. + type: boolean + + snps,dis-u2-freeclk-exists-quirk: + description: + When set, clear the u2_freeclk_exists in GUSB2PHYCFG, specify that USB2 + PHY doesn't provide a free-running PHY clock. + type: boolean + + snps,dis-del-phy-power-chg-quirk: + description: + When set core will change PHY power from P0 to P1/P2/P3 without delay. + type: boolean + + snps,dis-tx-ipgap-linecheck-quirk: + description: When set, disable u2mac linestate check during HS transmit + type: boolean + + snps,parkmode-disable-ss-quirk: + description: + When set, all SuperSpeed bus instances in park mode are disabled. + type: boolean + + snps,parkmode-disable-hs-quirk: + description: + When set, all HighSpeed bus instances in park mode are disabled. + type: boolean + + snps,dis_metastability_quirk: + description: + When set, disable metastability workaround. CAUTION! Use only if you are + absolutely sure of it. + type: boolean + + snps,dis-split-quirk: + description: + When set, change the way URBs are handled by the driver. Needed to + avoid -EPROTO errors with usbhid on some devices (Hikey 970). + type: boolean + + snps,gfladj-refclk-lpm-sel-quirk: + description: + When set, run the SOF/ITP counter based on ref_clk. + type: boolean + + snps,resume-hs-terminations: + description: + Fix the issue of HS terminations CRC error on resume by enabling this + quirk. When set, all the termsel, xcvrsel, opmode becomes 0 during end + of resume. This option is to support certain legacy ULPI PHYs. + type: boolean + + snps,ulpi-ext-vbus-drv: + description: + Some ULPI USB PHY does not support internal VBUS supply, and driving + the CPEN pin, requires the configuration of the ulpi DRVVBUSEXTERNAL + bit. When set, the xhci host will configure the USB2 PHY drives VBUS + with an external supply. + type: boolean + + snps,is-utmi-l1-suspend: + description: + True when DWC3 asserts output signal utmi_l1_suspend_n, false when + asserts utmi_sleep_n. + type: boolean + + snps,hird-threshold: + description: HIRD threshold + $ref: /schemas/types.yaml#/definitions/uint8 + + snps,hsphy_interface: + description: + High-Speed PHY interface selection between UTMI+ and ULPI when the + DWC_USB3_HSPHY_INTERFACE has value 3. + $ref: /schemas/types.yaml#/definitions/string + enum: [utmi, ulpi] + + snps,quirk-frame-length-adjustment: + description: + Value for GFLADJ_30MHZ field of GFLADJ register for post-silicon frame + length adjustment when the fladj_30mhz_sdbnd signal is invalid or + incorrect. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 0x3f + + snps,ref-clock-period-ns: + description: + Value for REFCLKPER field of GUCTL register for reference clock period in + nanoseconds, when the hardware set default does not match the actual + clock. + + This binding is deprecated. Instead, provide an appropriate reference clock. + minimum: 8 + maximum: 62 + deprecated: true + + snps,rx-thr-num-pkt: + description: + USB RX packet threshold count. In host mode, this field specifies + the space that must be available in the RX FIFO before the core can + start the corresponding USB RX transaction (burst). + In device mode, this field specifies the space that must be + available in the RX FIFO before the core can send ERDY for a + flow-controlled endpoint. It is only used for SuperSpeed. + The valid values for this field are from 1 to 15. (DWC3 SuperSpeed + USB 3.0 Controller Databook) + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 15 + + snps,rx-max-burst: + description: + Max USB RX burst size. In host mode, this field specifies the + Maximum Bulk IN burst the DWC_usb3 core can perform. When the system + bus is slower than the USB, RX FIFO can overrun during a long burst. + You can program a smaller value to this field to limit the RX burst + size that the core can perform. It only applies to SS Bulk, + Isochronous, and Interrupt IN endpoints in the host mode. + In device mode, this field specifies the NUMP value that is sent in + ERDY for an OUT endpoint. + The valid values for this field are from 1 to 16. (DWC3 SuperSpeed + USB 3.0 Controller Databook) + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 16 + + snps,tx-thr-num-pkt: + description: + USB TX packet threshold count. This field specifies the number of + packets that must be in the TXFIFO before the core can start + transmission for the corresponding USB transaction (burst). + This count is valid in both host and device modes. It is only used + for SuperSpeed operation. + Valid values are from 1 to 15. (DWC3 SuperSpeed USB 3.0 Controller + Databook) + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 15 + + snps,tx-max-burst: + description: + Max USB TX burst size. When the system bus is slower than the USB, + TX FIFO can underrun during a long burst. Program a smaller value + to this field to limit the TX burst size that the core can execute. + In Host mode, it only applies to SS Bulk, Isochronous, and Interrupt + OUT endpoints. This value is not used in device mode. + Valid values are from 1 to 16. (DWC3 SuperSpeed USB 3.0 Controller + Databook) + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 16 + + snps,rx-thr-num-pkt-prd: + description: + Periodic ESS RX packet threshold count (host mode only). Set this and + snps,rx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31 + programming guide section 1.2.4) to enable periodic ESS RX threshold. + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 16 + + snps,rx-max-burst-prd: + description: + Max periodic ESS RX burst size (host mode only). Set this and + snps,rx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31 + programming guide section 1.2.4) to enable periodic ESS RX threshold. + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 16 + + snps,tx-thr-num-pkt-prd: + description: + Periodic ESS TX packet threshold count (host mode only). Set this and + snps,tx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31 + programming guide section 1.2.3) to enable periodic ESS TX threshold. + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 16 + + snps,tx-max-burst-prd: + description: + Max periodic ESS TX burst size (host mode only). Set this and + snps,tx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31 + programming guide section 1.2.3) to enable periodic ESS TX threshold. + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 16 + + tx-fifo-resize: + description: Determines if the TX fifos can be dynamically resized depending + on the number of IN endpoints used and if bursting is supported. This + may help improve bandwidth on platforms with higher system latencies, as + increased fifo space allows for the controller to prefetch data into its + internal memory. + type: boolean + + tx-fifo-max-num: + description: Specifies the max number of packets the txfifo resizing logic + can account for when higher endpoint bursting is used. (bMaxBurst > 6) The + higher the number, the more fifo space the txfifo resizing logic will + allocate for that endpoint. + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 3 + + snps,incr-burst-type-adjustment: + description: + Value for INCR burst type of GSBUSCFG0 register, undefined length INCR + burst type enable and INCRx type. A single value means INCRX burst mode + enabled. If more than one value specified, undefined length INCR burst + type will be enabled with burst lengths utilized up to the maximum + of the values passed in this property. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + uniqueItems: true + items: + enum: [1, 4, 8, 16, 32, 64, 128, 256] + + num-hc-interrupters: + maximum: 8 + default: 1 + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + This port is used with the 'usb-role-switch' property to connect the + dwc3 to type C connector. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: + Those ports should be used with any connector to the data bus of this + controller using the OF graph bindings specified if the "usb-role-switch" + property is used. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: High Speed (HS) data bus. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Super Speed (SS) data bus. + + wakeup-source: + $ref: /schemas/types.yaml#/definitions/flag + description: + Enable USB remote wakeup. + +required: + - compatible + - reg + +additionalProperties: true +... + diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml index 1cd0ca90127d..4380bb6fa2f0 100644 --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml @@ -15,18 +15,7 @@ description: compatible string. allOf: - - $ref: usb-drd.yaml# - - if: - properties: - dr_mode: - const: peripheral - - required: - - dr_mode - then: - $ref: usb.yaml# - else: - $ref: usb-xhci.yaml# + - $ref: snps,dwc3-common.yaml# properties: compatible: @@ -70,32 +59,9 @@ properties: dma-coherent: true - extcon: - maxItems: 1 - deprecated: true - iommus: maxItems: 1 - usb-phy: - minItems: 1 - items: - - description: USB2/HS PHY - - description: USB3/SS PHY - - phys: - minItems: 1 - maxItems: 19 - - phy-names: - minItems: 1 - maxItems: 19 - oneOf: - - items: - enum: [ usb2-phy, usb3-phy ] - - items: - pattern: "^usb(2-([0-9]|1[0-4])|3-[0-3])$" - power-domains: description: The DWC3 has 2 power-domains. The power management unit (PMU) and @@ -109,361 +75,6 @@ properties: resets: minItems: 1 - snps,usb2-lpm-disable: - description: Indicate if we don't want to enable USB2 HW LPM for host - mode. - type: boolean - - snps,usb3_lpm_capable: - description: Determines if platform is USB3 LPM capable - type: boolean - - snps,usb2-gadget-lpm-disable: - description: Indicate if we don't want to enable USB2 HW LPM for gadget - mode. - type: boolean - - snps,dis-start-transfer-quirk: - description: - When set, disable isoc START TRANSFER command failure SW work-around - for DWC_usb31 version 1.70a-ea06 and prior. - type: boolean - - snps,disable_scramble_quirk: - description: - True when SW should disable data scrambling. Only really useful for FPGA - builds. - type: boolean - - snps,has-lpm-erratum: - description: True when DWC3 was configured with LPM Erratum enabled - type: boolean - - snps,lpm-nyet-threshold: - description: LPM NYET threshold - $ref: /schemas/types.yaml#/definitions/uint8 - - snps,u2exit_lfps_quirk: - description: Set if we want to enable u2exit lfps quirk - type: boolean - - snps,u2ss_inp3_quirk: - description: Set if we enable P3 OK for U2/SS Inactive quirk - type: boolean - - snps,req_p1p2p3_quirk: - description: - When set, the core will always request for P1/P2/P3 transition sequence. - type: boolean - - snps,del_p1p2p3_quirk: - description: - When set core will delay P1/P2/P3 until a certain amount of 8B10B errors - occur. - type: boolean - - snps,del_phy_power_chg_quirk: - description: When set core will delay PHY power change from P0 to P1/P2/P3. - type: boolean - - snps,lfps_filter_quirk: - description: When set core will filter LFPS reception. - type: boolean - - snps,rx_detect_poll_quirk: - description: - when set core will disable a 400us delay to start Polling LFPS after - RX.Detect. - type: boolean - - snps,tx_de_emphasis_quirk: - description: When set core will set Tx de-emphasis value - type: boolean - - snps,tx_de_emphasis: - description: - The value driven to the PHY is controlled by the LTSSM during USB3 - Compliance mode. - $ref: /schemas/types.yaml#/definitions/uint8 - enum: - - 0 # -6dB de-emphasis - - 1 # -3.5dB de-emphasis - - 2 # No de-emphasis - - snps,dis_u3_susphy_quirk: - description: When set core will disable USB3 suspend phy - type: boolean - - snps,dis_u2_susphy_quirk: - description: When set core will disable USB2 suspend phy - type: boolean - - snps,dis_enblslpm_quirk: - description: - When set clears the enblslpm in GUSB2PHYCFG, disabling the suspend signal - to the PHY. - type: boolean - - snps,dis-u1-entry-quirk: - description: Set if link entering into U1 needs to be disabled - type: boolean - - snps,dis-u2-entry-quirk: - description: Set if link entering into U2 needs to be disabled - type: boolean - - snps,dis_rxdet_inp3_quirk: - description: - When set core will disable receiver detection in PHY P3 power state. - type: boolean - - snps,dis-u2-freeclk-exists-quirk: - description: - When set, clear the u2_freeclk_exists in GUSB2PHYCFG, specify that USB2 - PHY doesn't provide a free-running PHY clock. - type: boolean - - snps,dis-del-phy-power-chg-quirk: - description: - When set core will change PHY power from P0 to P1/P2/P3 without delay. - type: boolean - - snps,dis-tx-ipgap-linecheck-quirk: - description: When set, disable u2mac linestate check during HS transmit - type: boolean - - snps,parkmode-disable-ss-quirk: - description: - When set, all SuperSpeed bus instances in park mode are disabled. - type: boolean - - snps,parkmode-disable-hs-quirk: - description: - When set, all HighSpeed bus instances in park mode are disabled. - type: boolean - - snps,dis_metastability_quirk: - description: - When set, disable metastability workaround. CAUTION! Use only if you are - absolutely sure of it. - type: boolean - - snps,dis-split-quirk: - description: - When set, change the way URBs are handled by the driver. Needed to - avoid -EPROTO errors with usbhid on some devices (Hikey 970). - type: boolean - - snps,gfladj-refclk-lpm-sel-quirk: - description: - When set, run the SOF/ITP counter based on ref_clk. - type: boolean - - snps,resume-hs-terminations: - description: - Fix the issue of HS terminations CRC error on resume by enabling this - quirk. When set, all the termsel, xcvrsel, opmode becomes 0 during end - of resume. This option is to support certain legacy ULPI PHYs. - type: boolean - - snps,ulpi-ext-vbus-drv: - description: - Some ULPI USB PHY does not support internal VBUS supply, and driving - the CPEN pin, requires the configuration of the ulpi DRVVBUSEXTERNAL - bit. When set, the xhci host will configure the USB2 PHY drives VBUS - with an external supply. - type: boolean - - snps,is-utmi-l1-suspend: - description: - True when DWC3 asserts output signal utmi_l1_suspend_n, false when - asserts utmi_sleep_n. - type: boolean - - snps,hird-threshold: - description: HIRD threshold - $ref: /schemas/types.yaml#/definitions/uint8 - - snps,hsphy_interface: - description: - High-Speed PHY interface selection between UTMI+ and ULPI when the - DWC_USB3_HSPHY_INTERFACE has value 3. - $ref: /schemas/types.yaml#/definitions/string - enum: [utmi, ulpi] - - snps,quirk-frame-length-adjustment: - description: - Value for GFLADJ_30MHZ field of GFLADJ register for post-silicon frame - length adjustment when the fladj_30mhz_sdbnd signal is invalid or - incorrect. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 0x3f - - snps,ref-clock-period-ns: - description: - Value for REFCLKPER field of GUCTL register for reference clock period in - nanoseconds, when the hardware set default does not match the actual - clock. - - This binding is deprecated. Instead, provide an appropriate reference clock. - minimum: 8 - maximum: 62 - deprecated: true - - snps,rx-thr-num-pkt: - description: - USB RX packet threshold count. In host mode, this field specifies - the space that must be available in the RX FIFO before the core can - start the corresponding USB RX transaction (burst). - In device mode, this field specifies the space that must be - available in the RX FIFO before the core can send ERDY for a - flow-controlled endpoint. It is only used for SuperSpeed. - The valid values for this field are from 1 to 15. (DWC3 SuperSpeed - USB 3.0 Controller Databook) - $ref: /schemas/types.yaml#/definitions/uint8 - minimum: 1 - maximum: 15 - - snps,rx-max-burst: - description: - Max USB RX burst size. In host mode, this field specifies the - Maximum Bulk IN burst the DWC_usb3 core can perform. When the system - bus is slower than the USB, RX FIFO can overrun during a long burst. - You can program a smaller value to this field to limit the RX burst - size that the core can perform. It only applies to SS Bulk, - Isochronous, and Interrupt IN endpoints in the host mode. - In device mode, this field specifies the NUMP value that is sent in - ERDY for an OUT endpoint. - The valid values for this field are from 1 to 16. (DWC3 SuperSpeed - USB 3.0 Controller Databook) - $ref: /schemas/types.yaml#/definitions/uint8 - minimum: 1 - maximum: 16 - - snps,tx-thr-num-pkt: - description: - USB TX packet threshold count. This field specifies the number of - packets that must be in the TXFIFO before the core can start - transmission for the corresponding USB transaction (burst). - This count is valid in both host and device modes. It is only used - for SuperSpeed operation. - Valid values are from 1 to 15. (DWC3 SuperSpeed USB 3.0 Controller - Databook) - $ref: /schemas/types.yaml#/definitions/uint8 - minimum: 1 - maximum: 15 - - snps,tx-max-burst: - description: - Max USB TX burst size. When the system bus is slower than the USB, - TX FIFO can underrun during a long burst. Program a smaller value - to this field to limit the TX burst size that the core can execute. - In Host mode, it only applies to SS Bulk, Isochronous, and Interrupt - OUT endpoints. This value is not used in device mode. - Valid values are from 1 to 16. (DWC3 SuperSpeed USB 3.0 Controller - Databook) - $ref: /schemas/types.yaml#/definitions/uint8 - minimum: 1 - maximum: 16 - - snps,rx-thr-num-pkt-prd: - description: - Periodic ESS RX packet threshold count (host mode only). Set this and - snps,rx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31 - programming guide section 1.2.4) to enable periodic ESS RX threshold. - $ref: /schemas/types.yaml#/definitions/uint8 - minimum: 1 - maximum: 16 - - snps,rx-max-burst-prd: - description: - Max periodic ESS RX burst size (host mode only). Set this and - snps,rx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31 - programming guide section 1.2.4) to enable periodic ESS RX threshold. - $ref: /schemas/types.yaml#/definitions/uint8 - minimum: 1 - maximum: 16 - - snps,tx-thr-num-pkt-prd: - description: - Periodic ESS TX packet threshold count (host mode only). Set this and - snps,tx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31 - programming guide section 1.2.3) to enable periodic ESS TX threshold. - $ref: /schemas/types.yaml#/definitions/uint8 - minimum: 1 - maximum: 16 - - snps,tx-max-burst-prd: - description: - Max periodic ESS TX burst size (host mode only). Set this and - snps,tx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31 - programming guide section 1.2.3) to enable periodic ESS TX threshold. - $ref: /schemas/types.yaml#/definitions/uint8 - minimum: 1 - maximum: 16 - - tx-fifo-resize: - description: Determines if the TX fifos can be dynamically resized depending - on the number of IN endpoints used and if bursting is supported. This - may help improve bandwidth on platforms with higher system latencies, as - increased fifo space allows for the controller to prefetch data into its - internal memory. - type: boolean - - tx-fifo-max-num: - description: Specifies the max number of packets the txfifo resizing logic - can account for when higher endpoint bursting is used. (bMaxBurst > 6) The - higher the number, the more fifo space the txfifo resizing logic will - allocate for that endpoint. - $ref: /schemas/types.yaml#/definitions/uint8 - minimum: 3 - - snps,incr-burst-type-adjustment: - description: - Value for INCR burst type of GSBUSCFG0 register, undefined length INCR - burst type enable and INCRx type. A single value means INCRX burst mode - enabled. If more than one value specified, undefined length INCR burst - type will be enabled with burst lengths utilized up to the maximum - of the values passed in this property. - $ref: /schemas/types.yaml#/definitions/uint32-array - minItems: 1 - maxItems: 8 - uniqueItems: true - items: - enum: [1, 4, 8, 16, 32, 64, 128, 256] - - num-hc-interrupters: - maximum: 8 - default: 1 - - port: - $ref: /schemas/graph.yaml#/properties/port - description: - This port is used with the 'usb-role-switch' property to connect the - dwc3 to type C connector. - - ports: - $ref: /schemas/graph.yaml#/properties/ports - description: - Those ports should be used with any connector to the data bus of this - controller using the OF graph bindings specified if the "usb-role-switch" - property is used. - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: High Speed (HS) data bus. - - port@1: - $ref: /schemas/graph.yaml#/properties/port - description: Super Speed (SS) data bus. - - wakeup-source: - $ref: /schemas/types.yaml#/definitions/flag - description: - Enable USB remote wakeup. - unevaluatedProperties: false required: diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml index 54c6586cb56d..bec1c8047bc0 100644 --- a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml +++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml @@ -56,26 +56,26 @@ examples: #size-cells = <0>; hd3ss3220@47 { - compatible = "ti,hd3ss3220"; - reg = <0x47>; - interrupt-parent = <&gpio6>; - interrupts = <3>; + compatible = "ti,hd3ss3220"; + reg = <0x47>; + interrupt-parent = <&gpio6>; + interrupts = <3>; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - hd3ss3220_in_ep: endpoint { - remote-endpoint = <&ss_ep>; - }; - }; - port@1 { - reg = <1>; - hd3ss3220_out_ep: endpoint { - remote-endpoint = <&usb3_role_switch>; - }; - }; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + hd3ss3220_in_ep: endpoint { + remote-endpoint = <&ss_ep>; + }; }; + port@1 { + reg = <1>; + hd3ss3220_out_ep: endpoint { + remote-endpoint = <&usb3_role_switch>; + }; + }; + }; }; }; diff --git a/Documentation/devicetree/bindings/usb/ti,tusb73x0-pci.yaml b/Documentation/devicetree/bindings/usb/ti,tusb73x0-pci.yaml index ddda734f36fb..c4a91b3d6612 100644 --- a/Documentation/devicetree/bindings/usb/ti,tusb73x0-pci.yaml +++ b/Documentation/devicetree/bindings/usb/ti,tusb73x0-pci.yaml @@ -48,8 +48,8 @@ examples: device_type = "pci"; usb@0 { - compatible = "pci104c,8241"; - reg = <0x0 0x0 0x0 0x0 0x0>; - ti,pwron-active-high; + compatible = "pci104c,8241"; + reg = <0x0 0x0 0x0 0x0 0x0>; + ti,pwron-active-high; }; }; diff --git a/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml b/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml index 8ef117793e11..61217da8b2f3 100644 --- a/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml +++ b/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml @@ -51,19 +51,19 @@ examples: /* 2.0 hub on port 1 */ hub_2_0: hub@1 { - compatible = "usb451,8027"; - reg = <1>; - peer-hub = <&hub_3_0>; - reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; - vdd-supply = <&usb_hub_fixed_3v3>; + compatible = "usb451,8027"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; + vdd-supply = <&usb_hub_fixed_3v3>; }; /* 3.0 hub on port 2 */ hub_3_0: hub@2 { - compatible = "usb451,8025"; - reg = <2>; - peer-hub = <&hub_2_0>; - reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; - vdd-supply = <&usb_hub_fixed_3v3>; + compatible = "usb451,8025"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; + vdd-supply = <&usb_hub_fixed_3v3>; }; }; diff --git a/Documentation/devicetree/bindings/usb/ti,usb8041.yaml b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml index c2e29bd61e11..bce730a5e237 100644 --- a/Documentation/devicetree/bindings/usb/ti,usb8041.yaml +++ b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml @@ -51,17 +51,17 @@ examples: /* 2.0 hub on port 1 */ hub_2_0: hub@1 { - compatible = "usb451,8142"; - reg = <1>; - peer-hub = <&hub_3_0>; - reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + compatible = "usb451,8142"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; /* 3.0 hub on port 2 */ hub_3_0: hub@2 { - compatible = "usb451,8140"; - reg = <2>; - peer-hub = <&hub_2_0>; - reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + compatible = "usb451,8140"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; }; diff --git a/Documentation/driver-api/driver-model/devres.rst b/Documentation/driver-api/driver-model/devres.rst index d594d0ea0e9d..d75728eb05f8 100644 --- a/Documentation/driver-api/driver-model/devres.rst +++ b/Documentation/driver-api/driver-model/devres.rst @@ -404,7 +404,6 @@ PHY devm_usb_get_phy() devm_usb_get_phy_by_node() devm_usb_get_phy_by_phandle() - devm_usb_put_phy() PINCTRL devm_pinctrl_get() diff --git a/Documentation/usb/usbip_protocol.rst b/Documentation/usb/usbip_protocol.rst index adc158967cc6..3da1df3d94f5 100644 --- a/Documentation/usb/usbip_protocol.rst +++ b/Documentation/usb/usbip_protocol.rst @@ -285,17 +285,17 @@ OP_REP_IMPORT: +-----------+--------+------------+---------------------------------------------------+ | 0x138 | 2 | | bcdDevice | +-----------+--------+------------+---------------------------------------------------+ -| 0x139 | 1 | | bDeviceClass | +| 0x13A | 1 | | bDeviceClass | +-----------+--------+------------+---------------------------------------------------+ -| 0x13A | 1 | | bDeviceSubClass | +| 0x13B | 1 | | bDeviceSubClass | +-----------+--------+------------+---------------------------------------------------+ -| 0x13B | 1 | | bDeviceProtocol | +| 0x13C | 1 | | bDeviceProtocol | +-----------+--------+------------+---------------------------------------------------+ -| 0x13C | 1 | | bConfigurationValue | +| 0x13D | 1 | | bConfigurationValue | +-----------+--------+------------+---------------------------------------------------+ -| 0x13D | 1 | | bNumConfigurations | +| 0x13E | 1 | | bNumConfigurations | +-----------+--------+------------+---------------------------------------------------+ -| 0x13E | 1 | | bNumInterfaces | +| 0x13F | 1 | | bNumInterfaces | +-----------+--------+------------+---------------------------------------------------+ The following four commands have a common basic header called |