Merge tag 'phy-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into char-misc-next

Kishon writes:

phy: for 5.4

  *) Add a new PHY driver for Lantiq VRX200/ARX300 PCIe PHY
  *) Add missing of_node_put() to a bunch of drivers using
     for_each_available_child_of_node()
  *) Add RXAUI/PCIe/SATA/USB3 support in Marvell's Armada
     CP110 COMPHY
  *) Other misc fixes and cleanup

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

* tag 'phy-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (30 commits)
  phy: marvell: phy-mvebu-cp110-comphy: rename instances of DLT
  phy: marvell: phy-mvebu-cp110-comphy: implement RXAUI support
  dt-bindings: pci: add PHY properties to Armada 7K/8K controller bindings
  dt-bindings: phy: Add Marvell COMPHY clocks
  phy: mvebu-cp110-comphy: Update comment about powering off all lanes at boot
  phy: mvebu-cp110-comphy: Add PCIe support
  phy: mvebu-cp110-comphy: Cosmetic change in a helper
  phy: mvebu-cp110-comphy: Add SATA support
  phy: mvebu-cp110-comphy: Add USB3 host/device support
  phy: mvebu-cp110-comphy: Allow non-Ethernet modes to be configured
  phy: mvebu-cp110-comphy: Rename the macro handling only Ethernet modes
  phy: mvebu-cp110-comphy: Add RXAUI support
  phy: mvebu-cp110-comphy: List already supported Ethernet modes
  phy: mvebu-cp110-comphy: Add SMC call support
  phy: mvebu-cp110-comphy: Explicitly initialize the lane submode
  phy: mvebu-cp110-comphy: Add clocks support
  phy-rockchip-inno-hdmi: Fix RK3328_TERM_RESISTOR_CALIB_SPEED_7_0's third value
  phy: qcom-qmp: Correct ready status, again
  phy: qualcomm: phy-qcom-qmp: Add of_node_put() before return
  phy: renesas: rcar-gen3-usb2: Disable clearing VBUS in over-current
  ...

3 files changed, 113 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/pci/pci-armada8k.txt b/Documentation/devicetree/bindings/pci/pci-armada8k.txt
index 9e3fc15e1af8..8324a4ee6f06 100644
--- a/Documentation/devicetree/bindings/pci/pci-armada8k.txt
+++ b/Documentation/devicetree/bindings/pci/pci-armada8k.txt
@@ -17,6 +17,14 @@ Required properties:
    name must be "core" for the first clock and "reg" for the second
    one
 
+Optional properties:
+- phys: phandle(s) to PHY node(s) following the generic PHY bindings.
+	Either 1, 2 or 4 PHYs might be needed depending on the number of
+	PCIe lanes.
+- phy-names: names of the PHYs corresponding to the number of lanes.
+	Must be "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy" for
+	2 PHYs.
+
 Example:
 
 	pcie@f2600000 {
diff --git a/Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml
new file mode 100644
index 000000000000..8a56a8526cef
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/lantiq,vrx200-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq VRX200 and ARX300 PCIe PHY Device Tree Bindings
+
+maintainers:
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+properties:
+  "#phy-cells":
+    const: 1
+    description: selects the PHY mode as defined in <dt-bindings/phy/phy-lantiq-vrx200-pcie.h>
+
+  compatible:
+    enum:
+      - lantiq,vrx200-pcie-phy
+      - lantiq,arx300-pcie-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PHY module clock
+      - description: PDI register clock
+
+  clock-names:
+    items:
+      - const: phy
+      - const: pdi
+
+  resets:
+    items:
+      - description: exclusive PHY reset line
+      - description: shared reset line between the PCIe PHY and PCIe controller
+
+  resets-names:
+    items:
+      - const: phy
+      - const: pcie
+
+  lantiq,rcu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the RCU syscon
+
+  lantiq,rcu-endian-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: the offset of the endian registers for this PHY instance in the RCU syscon
+
+  lantiq,rcu-big-endian-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: the mask to set the PDI (PHY) registers for this PHY instance to big endian
+
+  big-endian:
+    description: Configures the PDI (PHY) registers in big-endian mode
+    type: boolean
+
+  little-endian:
+    description: Configures the PDI (PHY) registers in big-endian mode
+    type: boolean
+
+required:
+  - "#phy-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - lantiq,rcu
+  - lantiq,rcu-endian-offset
+  - lantiq,rcu-big-endian-mask
+
+additionalProperties: false
+
+examples:
+  - |
+    pcie0_phy: phy@106800 {
+        compatible = "lantiq,vrx200-pcie-phy";
+        reg = <0x106800 0x100>;
+        lantiq,rcu = <&rcu0>;
+        lantiq,rcu-endian-offset = <0x4c>;
+        lantiq,rcu-big-endian-mask = <0x80>; /* bit 7 */
+        big-endian;
+        clocks = <&pmu 32>, <&pmu 36>;
+        clock-names = "phy", "pdi";
+        resets = <&reset0 12 24>, <&reset0 22 22>;
+        reset-names = "phy", "pcie";
+        #phy-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt
index cf2cd86db267..8c60e6985950 100644
--- a/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt
+++ b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt
@@ -25,6 +25,13 @@ Required properties:
 - #address-cells: should be 1.
 - #size-cells: should be 0.
 
+Optional properlties:
+
+- clocks: pointers to the reference clocks for this device (CP110 only),
+          consequently: MG clock, MG Core clock, AXI clock.
+- clock-names: names of used clocks for CP110 only, must be :
+               "mg_clk", "mg_core_clk" and "axi_clk".
+
 A sub-node is required for each comphy lane provided by the comphy.
 
 Required properties (child nodes):
@@ -39,6 +46,9 @@ Examples:
 		compatible = "marvell,comphy-cp110";
 		reg = <0x120000 0x6000>;
 		marvell,system-controller = <&cpm_syscon0>;
+		clocks = <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>,
+			 <&CP110_LABEL(clk) 1 18>;
+		clock-names = "mg_clk", "mg_core_clk", "axi_clk";
 		#address-cells = <1>;
 		#size-cells = <0>;