ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 185 deletions

diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts
deleted file mode 100644
index 32c569df142f..000000000000
--- a/arch/arm/boot/dts/armada-388-clearfog.dts
+++ /dev/null
@@ -1,185 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828)
- *
- *  Copyright (C) 2015 Russell King
- */
-
-/dts-v1/;
-#include "armada-388-clearfog.dtsi"
-
-/ {
-	model = "SolidRun Clearfog A1";
-	compatible = "solidrun,clearfog-a1", "marvell,armada388",
-		"marvell,armada385", "marvell,armada380";
-
-	soc {
-		internal-regs {
-			usb3@f0000 {
-				/* CON2, nearest CPU, USB2 only. */
-				status = "okay";
-			};
-		};
-
-		pcie {
-			pcie@3,0 {
-				/* Port 2, Lane 0. CON2, nearest CPU. */
-				reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>;
-				status = "okay";
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&rear_button_pins>;
-		pinctrl-names = "default";
-
-		button-0 {
-			/* The rear SW3 button */
-			label = "Rear Button";
-			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-			linux,can-disable;
-			linux,code = <BTN_0>;
-		};
-	};
-};
-
-&eth1 {
-	/* ethernet@30000 */
-	phy-mode = "1000base-x";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&expander0 {
-	/*
-	 * PCA9655 GPIO expander:
-	 *  0-CON3 CLKREQ#
-	 *  1-CON3 PERST#
-	 *  2-CON2 PERST#
-	 *  3-CON3 W_DISABLE
-	 *  4-CON2 CLKREQ#
-	 *  5-USB3 overcurrent
-	 *  6-USB3 power
-	 *  7-CON2 W_DISABLE
-	 *  8-JP4 P1
-	 *  9-JP4 P4
-	 * 10-JP4 P5
-	 * 11-m.2 DEVSLP
-	 * 12-SFP_LOS
-	 * 13-SFP_TX_FAULT
-	 * 14-SFP_TX_DISABLE
-	 * 15-SFP_MOD_DEF0
-	 */
-	pcie2-0-clkreq-hog {
-		gpio-hog;
-		gpios = <4 GPIO_ACTIVE_LOW>;
-		input;
-		line-name = "pcie2.0-clkreq";
-	};
-	pcie2-0-w-disable-hog {
-		gpio-hog;
-		gpios = <7 GPIO_ACTIVE_LOW>;
-		output-low;
-		line-name = "pcie2.0-w-disable";
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	switch@4 {
-		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <4>;
-		pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
-		pinctrl-names = "default";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "lan5";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan4";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan3";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan2";
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "lan1";
-			};
-
-			port@5 {
-				reg = <5>;
-				ethernet = <&eth1>;
-				phy-mode = "1000base-x";
-
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-			port@6 {
-				/* 88E1512 external phy */
-				reg = <6>;
-				label = "lan6";
-				phy-mode = "rgmii-id";
-
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-		};
-	};
-};
-
-&pinctrl {
-	clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins {
-		marvell,pins = "mpp46";
-		marvell,function = "ref";
-	};
-	clearfog_dsa0_pins: clearfog-dsa0-pins {
-		marvell,pins = "mpp23", "mpp41";
-		marvell,function = "gpio";
-	};
-	clearfog_spi1_cs_pins: spi1-cs-pins {
-		marvell,pins = "mpp55";
-		marvell,function = "spi1";
-	};
-	rear_button_pins: rear-button-pins {
-		marvell,pins = "mpp34";
-		marvell,function = "gpio";
-	};
-};
-
-&spi1 {
-	/*
-	 * Add SPI CS pins for clearfog:
-	 * CS0: W25Q32
-	 * CS1:
-	 * CS2: mikrobus
-	 */
-	pinctrl-0 = <&spi1_pins &clearfog_spi1_cs_pins &mikro_spi_pins>;
-};