Merge tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree changes from Arnd Bergmann:
 "A large part of the arm-soc patches are nowadays DT changes, adding
  support for new SoCs, boards and devices without changing kernel
  source.  The plan is still to move the devicetree files out of the
  kernel tree and reduce the amount of churn going on here, but we keep
  finding reasons to delay doing that.

  Changes are really all over the place, with little sticking out
  particularly.  We have contributions from a total of 116 people in
  this branch.

  Unfortunately, the size of this branch also causes a significant
  number of conflicts at the moment, typically when subsystem
  maintainers merge patches that change the driver at the same time as
  the dts files.  In most cases this could be avoided because the dts
  changes are supposed to be compatible in both ways, and we are asking
  everyone to send ARM dts changes through our tree only"

* tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (541 commits)
  dts: stmmac: Document the clocks property in the stmmac base document
  dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
  ARM: STi: stih41x: Add support for the FSM Serial Flash Controller
  ARM: STi: stih416: Add support for the FSM Serial Flash Controller
  ARM: tegra: fix Dalmore pinctrl configuration
  ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm
  ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND
  ARM: dts: Build all keystone dt blobs
  ARM: dts: keystone: Fix control register range for clktsip
  ARM: dts: keystone: Fix domain register range for clkfftc1
  ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot
  ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap
  ARM: dts: bcm21664: Add device tree files.
  ARM: DT: bcm21664: Device tree bindings
  ARM: efm32: properly namespace i2c location property
  ARM: efm32: fix unit address part in USART2 device nodes' names
  ARM: mvebu: Enable NAND controller in Armada 385-DB
  ARM: mvebu: Add support for NAND controller in Armada 38x SoC
  ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs
  ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs
  ...

1 files changed, 292 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi
new file mode 100644
index 000000000000..08a44d41b672
--- /dev/null
+++ b/arch/arm/boot/dts/bcm21664.dtsi
@@ -0,0 +1,292 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	model = "BCM21664 SoC";
+	compatible = "brcm,bcm21664";
+	interrupt-parent = <&gic>;
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	gic: interrupt-controller@3ff00100 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x3ff01000 0x1000>,
+		      <0x3ff00100 0x100>;
+	};
+
+	smc@0x3404e000 {
+		compatible = "brcm,bcm21664-smc", "brcm,kona-smc";
+		reg = <0x3404e000 0x400>; /* 1 KiB in SRAM */
+	};
+
+	uart@3e000000 {
+		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e000000 0x118>;
+		clocks = <&uartb_clk>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+	uart@3e001000 {
+		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e001000 0x118>;
+		clocks = <&uartb2_clk>;
+		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+	uart@3e002000 {
+		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e002000 0x118>;
+		clocks = <&uartb3_clk>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+	L2: l2-cache {
+		compatible = "arm,pl310-cache";
+		reg = <0x3ff20000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	brcm,resetmgr@35001f00 {
+		compatible = "brcm,bcm21664-resetmgr";
+		reg = <0x35001f00 0x24>;
+	};
+
+	timer@35006000 {
+		compatible = "brcm,kona-timer";
+		reg = <0x35006000 0x1c>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&hub_timer_clk>;
+	};
+
+	gpio: gpio@35003000 {
+		compatible = "brcm,bcm21664-gpio", "brcm,kona-gpio";
+		reg = <0x35003000 0x524>;
+		interrupts =
+		       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+	};
+
+	sdio1: sdio@3f180000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f180000 0x801c>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sdio1_clk>;
+		status = "disabled";
+	};
+
+	sdio2: sdio@3f190000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f190000 0x801c>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sdio2_clk>;
+		status = "disabled";
+	};
+
+	sdio3: sdio@3f1a0000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f1a0000 0x801c>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sdio3_clk>;
+		status = "disabled";
+	};
+
+	sdio4: sdio@3f1b0000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f1b0000 0x801c>;
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sdio4_clk>;
+		status = "disabled";
+	};
+
+	i2c@3e016000 {
+		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+		reg = <0x3e016000 0x70>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bsc1_clk>;
+		status = "disabled";
+	};
+
+	i2c@3e017000 {
+		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+		reg = <0x3e017000 0x70>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bsc2_clk>;
+		status = "disabled";
+	};
+
+	i2c@3e018000 {
+		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+		reg = <0x3e018000 0x70>;
+		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bsc3_clk>;
+		status = "disabled";
+	};
+
+	i2c@3e01c000 {
+		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+		reg = <0x3e01c000 0x70>;
+		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bsc4_clk>;
+		status = "disabled";
+	};
+
+	clocks {
+		bsc1_clk: bsc1 {
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+			#clock-cells = <0>;
+		};
+
+		bsc2_clk: bsc2 {
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+			#clock-cells = <0>;
+		};
+
+		bsc3_clk: bsc3 {
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+			#clock-cells = <0>;
+		};
+
+		bsc4_clk: bsc4 {
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+			#clock-cells = <0>;
+		};
+
+		pmu_bsc_clk: pmu_bsc {
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+			#clock-cells = <0>;
+		};
+
+		hub_timer_clk: hub_timer {
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			#clock-cells = <0>;
+		};
+
+		pwm_clk: pwm {
+			compatible = "fixed-clock";
+			clock-frequency = <26000000>;
+			#clock-cells = <0>;
+		};
+
+		sdio1_clk: sdio1 {
+			compatible = "fixed-clock";
+			clock-frequency = <48000000>;
+			#clock-cells = <0>;
+		};
+
+		sdio2_clk: sdio2 {
+			compatible = "fixed-clock";
+			clock-frequency = <48000000>;
+			#clock-cells = <0>;
+		};
+
+		sdio3_clk: sdio3 {
+			compatible = "fixed-clock";
+			clock-frequency = <48000000>;
+			#clock-cells = <0>;
+		};
+
+		sdio4_clk: sdio4 {
+			compatible = "fixed-clock";
+			clock-frequency = <48000000>;
+			#clock-cells = <0>;
+		};
+
+		tmon_1m_clk: tmon_1m {
+			compatible = "fixed-clock";
+			clock-frequency = <1000000>;
+			#clock-cells = <0>;
+		};
+
+		uartb_clk: uartb {
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+			#clock-cells = <0>;
+		};
+
+		uartb2_clk: uartb2 {
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+			#clock-cells = <0>;
+		};
+
+		uartb3_clk: uartb3 {
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+			#clock-cells = <0>;
+		};
+
+		usb_otg_ahb_clk: usb_otg_ahb {
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	usbotg: usb@3f120000 {
+		compatible = "snps,dwc2";
+		reg = <0x3f120000 0x10000>;
+		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&usb_otg_ahb_clk>;
+		clock-names = "otg";
+		phys = <&usbphy>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	usbphy: usb-phy@3f130000 {
+		compatible = "brcm,kona-usb2-phy";
+		reg = <0x3f130000 0x28>;
+		#phy-cells = <0>;
+		status = "disabled";
+	};
+};