ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 234 deletions

diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
deleted file mode 100644
index 707c561703ed..000000000000
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Netgear R8000
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "bcm4709.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "netgear,r8000", "brcm,bcm4709", "brcm,bcm4708";
-	model = "Netgear R8000 (BCM4709)";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-power-white {
-			label = "bcm53xx:white:power";
-			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-power-amber {
-			label = "bcm53xx:amber:power";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-
-		led-wan-white {
-			label = "bcm53xx:white:wan";
-			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		led-wan-amber {
-			label = "bcm53xx:amber:wan";
-			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-5ghz-1 {
-			label = "bcm53xx:white:5ghz-1";
-			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
-		};
-
-		led-2ghz {
-			label = "bcm53xx:white:2ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-		};
-
-		led-wireless {
-			label = "bcm53xx:white:wireless";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-wps {
-			label = "bcm53xx:white:wps";
-			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-5ghz-2 {
-			label = "bcm53xx:white:5ghz-2";
-			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
-		};
-
-		led-usb3 {
-			label = "bcm53xx:white:usb3";
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-
-		led-usb2 {
-			label = "bcm53xx:white:usb2";
-			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-rfkill {
-			label = "WiFi";
-			linux,code = <KEY_RFKILL>;
-			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-		};
-
-		button-wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
-		};
-
-		button-restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-		};
-
-		button-brightness {
-			label = "Backlight";
-			linux,code = <KEY_BRIGHTNESS_ZERO>;
-			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&pcie0 {
-	#address-cells = <3>;
-	#size-cells = <2>;
-
-	bridge@0,0,0 {
-		reg = <0x0000 0 0 0 0>;
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-
-		wifi@0,1,0 {
-			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
-			reg = <0x0000 0 0 0 0>;
-			ieee80211-freq-limit = <5735000 5835000>;
-			brcm,ccode-map = "JP-JP-78", "US-Q2-86";
-		};
-	};
-};
-
-&pcie1 {
-	#address-cells = <3>;
-	#size-cells = <2>;
-
-	bridge@1,0,0 {
-		reg = <0x0000 0 0 0 0>;
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-
-		bridge@1,1,0 {
-			reg = <0x0000 0 0 0 0>;
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			bridge@1,0 {
-				reg = <0x800 0 0 0 0>;
-
-				#address-cells = <3>;
-				#size-cells = <2>;
-
-				wifi@0,0 {
-					compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
-					reg = <0x0000 0 0 0 0>;
-					brcm,ccode-map = "JP-JP-78", "US-Q2-86";
-				};
-			};
-
-			bridge@1,2,2 {
-				reg = <0x1000 0 0 0 0>;
-
-				#address-cells = <3>;
-				#size-cells = <2>;
-
-				wifi@1,4,0 {
-					compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
-					reg = <0x0000 0 0 0 0>;
-					ieee80211-freq-limit = <5170000 5730000>;
-					brcm,ccode-map = "JP-JP-78", "US-Q2-86";
-				};
-			};
-		};
-	};
-};
-
-&usb2 {
-	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-};
-
-&usb3 {
-	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-};
-
-&usb3_phy {
-	status = "okay";
-};
-
-&srab {
-	status = "okay";
-
-	ports {
-		port@0 {
-			label = "lan1";
-		};
-
-		port@1 {
-			label = "lan2";
-		};
-
-		port@2 {
-			label = "lan3";
-		};
-
-		port@3 {
-			label = "lan4";
-		};
-
-		port@4 {
-			label = "wan";
-		};
-
-		port@8 {
-			label = "cpu";
-		};
-	};
-};