ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 432 deletions

diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
deleted file mode 100644
index 3fdd922e635c..000000000000
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ /dev/null
@@ -1,432 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos3250 based ARTIK5 module device tree source
- *
- * Copyright (c) 2016 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Device tree source file for Samsung's ARTIK5 module which is based on
- * Samsung Exynos3250 SoC.
- */
-
-#include "exynos3250.dtsi"
-#include <dt-bindings/clock/samsung,s2mps11.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "samsung,artik5", "samsung,exynos3250", "samsung,exynos3";
-
-	aliases {
-		mmc0 = &mshc_0;
-		mmc1 = &mshc_1;
-	};
-
-	chosen {
-		stdout-path = &serial_2;
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x1f800000>;
-	};
-
-	firmware@205f000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x0205f000 0x1000>;
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			cooling-maps {
-				map0 {
-					/* Corresponds to 500MHz */
-					cooling-device = <&cpu0 5 5>,
-							 <&cpu1 5 5>;
-				};
-				map1 {
-					/* Corresponds to 200MHz */
-					cooling-device = <&cpu0 8 8>,
-							 <&cpu1 8 8>;
-				};
-			};
-		};
-	};
-};
-
-&adc {
-	vdd-supply = <&ldo7_reg>;
-	assigned-clocks = <&cmu CLK_SCLK_TSADC>;
-	assigned-clock-rates = <6000000>;
-};
-
-&cmu {
-	clocks = <&xusbxti>;
-};
-
-&cpu0 {
-	cpu0-supply = <&buck2_reg>;
-};
-
-&gpu {
-	mali-supply = <&buck3_reg>;
-	status = "okay";
-};
-
-&i2c_0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <100000>;
-	status = "okay";
-
-	pmic@66 {
-		compatible = "samsung,s2mps14-pmic";
-		interrupt-parent = <&gpx3>;
-		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&s2mps14_irq>;
-		reg = <0x66>;
-
-		s2mps14_osc: clocks {
-			compatible = "samsung,s2mps14-clk";
-			#clock-cells = <1>;
-			clock-output-names = "s2mps14_ap", "unused",
-				"s2mps14_bt";
-		};
-
-		regulators {
-			ldo1_reg: LDO1 {
-				/* VDD_ALIVE15x */
-				regulator-name = "VLDO1_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo2_reg: LDO2 {
-				/* VDDQM176 ~ VDDQM185 */
-				regulator-name = "VLDO2_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			ldo3_reg: LDO3 {
-				/*
-				 * VDD1_E106 ~ VDD1_E111
-				 * DVDD_RTC_AP, DVDD_MMC2_AP
-				 */
-				regulator-name = "VLDO3_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo4_reg: LDO4 {
-				/*  AVDD_PLL1120 ~ AVDD_PLL11201 */
-				regulator-name = "VLDO4_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo5_reg: LDO5 {
-				/* VDDI_PLL_ISO141 ~ VDDI_PLL_ISO142 */
-				regulator-name = "VLDO5_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo6_reg: LDO6 {
-				/* VDD_USB, VDD10_HSIC */
-				regulator-name = "VLDO6_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo7_reg: LDO7 {
-				/*
-				 * VDD18P, AVDD18_TS, AVDD18_HSIC, AVDD_PLL2,
-				 * AVDD_ADC, AVDD_ABB_0, M4S_VDD18
-				 */
-				regulator-name = "VLDO7_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo8_reg: LDO8 {
-				/* AVDD33_UOTG */
-				regulator-name = "VLDO8_3.0V";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			ldo9_reg: LDO9 {
-				/* VDDQ_E86 ~ VDDQ_E105*/
-				regulator-name = "VLDO9_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "VLDO10_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-			};
-
-			ldo11_reg: LDO11 {
-				/* VDD74 ~ VDD75 */
-				regulator-name = "VLDO11_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
-			};
-
-			ldo12_reg: LDO12 {
-				/* VDD72 ~ VDD73 */
-				regulator-name = "VLDO12_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
-			};
-
-			ldo13_reg: LDO13 {
-				regulator-name = "VLDO13_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "VLDO14_2.7V";
-				regulator-min-microvolt = <2700000>;
-				regulator-max-microvolt = <2700000>;
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "VLDO_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "VLDO16_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo17_reg: LDO17 {
-				regulator-name = "VLDO17_3.0V";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			ldo18_reg: LDO18 {
-				/* DVDD_MMC2_AP */
-				regulator-name = "VLDO18_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			ldo19_reg: LDO19 {
-				regulator-name = "VLDO19_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo20_reg: LDO20 {
-				regulator-name = "VLDO20_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo21_reg: LDO21 {
-				regulator-name = "VLDO21_1.25V";
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1250000>;
-			};
-
-			ldo22_reg: LDO22 {
-				regulator-name = "VLDO22_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			ldo23_reg: LDO23 {
-				/* Xi2c3_SDA/SCL, Xi2c7_SDA/SCL, WLAN_SDIO */
-				regulator-name = "VLDO23_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo24_reg: LDO24 {
-				regulator-name = "VLDO24_3.0V";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			ldo25_reg: LDO25 {
-				regulator-name = "VLDO25_3.0V";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			buck1_reg: BUCK1 {
-				/* VDD_MIF */
-				regulator-name = "VBUCK1_1.0V";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			buck2_reg: BUCK2 {
-				/* VDD_CPU */
-				regulator-name = "VBUCK2_1.2V";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			buck3_reg: BUCK3 {
-				/* VDD_G3D */
-				regulator-name = "VBUCK3_1.0V";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "VBUCK4_1.95V";
-				regulator-min-microvolt = <1950000>;
-				regulator-max-microvolt = <1950000>;
-				regulator-always-on;
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "VBUCK5_1.35V";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&mshc_0 {
-	non-removable;
-	cap-mmc-highspeed;
-	card-detect-delay = <200>;
-	vmmc-supply = <&ldo12_reg>;
-	clock-frequency = <100000000>;
-	max-frequency = <100000000>;
-	mmc-ddr-1_8v;
-	samsung,dw-mshc-ciu-div = <1>;
-	samsung,dw-mshc-sdr-timing = <0 1>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
-	bus-width = <8>;
-	status = "okay";
-};
-
-&mshc_1 {
-	cap-sd-highspeed;
-	cap-sdio-irq;
-	disable-wp;
-	non-removable;
-	keep-power-in-suspend;
-	fifo-depth = <0x40>;
-	vqmmc-supply = <&ldo11_reg>;
-	/*
-	 * Voltage negotiation is broken for the SDIO periph so we
-	 * can't actually set the voltage here.
-	 * vmmc-supply = <&ldo23_reg>;
-	 */
-	card-detect-delay = <500>;
-	clock-frequency = <100000000>;
-	max-frequency = <100000000>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <0 1>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd1_cmd &sd1_clk &sd1_bus1 &sd1_bus4 &wlanen>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&pinctrl_1 {
-	bten: bten-pins {
-		samsung,pins = "gpx1-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
-		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_DOWN>;
-	};
-
-	wlanen: wlanen-pins {
-		samsung,pins = "gpx2-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV3>;
-		samsung,pin-val = <1>;
-	};
-
-	s2mps14_irq: s2mps14-irq-pins {
-		samsung,pins = "gpx3-5";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	bthostwake: bthostwake-pins {
-		samsung,pins = "gpx3-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
-		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
-	};
-
-	btwake: btwake-pins {
-		samsung,pins = "gpx3-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT0>;
-		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_DOWN>;
-	};
-};
-
-&rtc {
-	clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
-	clock-names = "rtc", "rtc_src";
-	status = "okay";
-};
-
-&serial_0 {
-	assigned-clocks = <&cmu CLK_SCLK_UART0>;
-	assigned-clock-rates = <100000000>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm4330-bt";
-		pinctrl-names = "default";
-		pinctrl-0 = <&bten &btwake &bthostwake>;
-		max-speed = <3000000>;
-		shutdown-gpios = <&gpx1 7 GPIO_ACTIVE_HIGH>;
-		device-wakeup-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpx3 6 GPIO_ACTIVE_HIGH>;
-		clocks = <&s2mps14_osc S2MPS11_CLK_BT>;
-	};
-};
-
-&tmu {
-	status = "okay";
-};
-
-&xusbxti {
-	clock-frequency = <24000000>;
-};