Merge tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree changes from Arnd Bergmann:
 "A large part of the arm-soc patches are nowadays DT changes, adding
  support for new SoCs, boards and devices without changing kernel
  source.  The plan is still to move the devicetree files out of the
  kernel tree and reduce the amount of churn going on here, but we keep
  finding reasons to delay doing that.

  Changes are really all over the place, with little sticking out
  particularly.  We have contributions from a total of 116 people in
  this branch.

  Unfortunately, the size of this branch also causes a significant
  number of conflicts at the moment, typically when subsystem
  maintainers merge patches that change the driver at the same time as
  the dts files.  In most cases this could be avoided because the dts
  changes are supposed to be compatible in both ways, and we are asking
  everyone to send ARM dts changes through our tree only"

* tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (541 commits)
  dts: stmmac: Document the clocks property in the stmmac base document
  dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
  ARM: STi: stih41x: Add support for the FSM Serial Flash Controller
  ARM: STi: stih416: Add support for the FSM Serial Flash Controller
  ARM: tegra: fix Dalmore pinctrl configuration
  ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm
  ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND
  ARM: dts: Build all keystone dt blobs
  ARM: dts: keystone: Fix control register range for clktsip
  ARM: dts: keystone: Fix domain register range for clkfftc1
  ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot
  ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap
  ARM: dts: bcm21664: Add device tree files.
  ARM: DT: bcm21664: Device tree bindings
  ARM: efm32: properly namespace i2c location property
  ARM: efm32: fix unit address part in USART2 device nodes' names
  ARM: mvebu: Enable NAND controller in Armada 385-DB
  ARM: mvebu: Add support for NAND controller in Armada 38x SoC
  ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs
  ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs
  ...

1 files changed, 37 insertions, 36 deletions

diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 08452e183b57..28b5ec79f339 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -19,6 +19,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <dt-bindings/clock/exynos4.h>
 #include "skeleton.dtsi"
 
 / {
@@ -119,7 +120,7 @@
 			compatible = "samsung,exynos4210-fimc";
 			reg = <0x11800000 0x1000>;
 			interrupts = <0 84 0>;
-			clocks = <&clock 256>, <&clock 128>;
+			clocks = <&clock CLK_FIMC0>, <&clock CLK_SCLK_FIMC0>;
 			clock-names = "fimc", "sclk_fimc";
 			samsung,power-domain = <&pd_cam>;
 			samsung,sysreg = <&sys_reg>;
@@ -130,7 +131,7 @@
 			compatible = "samsung,exynos4210-fimc";
 			reg = <0x11810000 0x1000>;
 			interrupts = <0 85 0>;
-			clocks = <&clock 257>, <&clock 129>;
+			clocks = <&clock CLK_FIMC1>, <&clock CLK_SCLK_FIMC1>;
 			clock-names = "fimc", "sclk_fimc";
 			samsung,power-domain = <&pd_cam>;
 			samsung,sysreg = <&sys_reg>;
@@ -141,7 +142,7 @@
 			compatible = "samsung,exynos4210-fimc";
 			reg = <0x11820000 0x1000>;
 			interrupts = <0 86 0>;
-			clocks = <&clock 258>, <&clock 130>;
+			clocks = <&clock CLK_FIMC2>, <&clock CLK_SCLK_FIMC2>;
 			clock-names = "fimc", "sclk_fimc";
 			samsung,power-domain = <&pd_cam>;
 			samsung,sysreg = <&sys_reg>;
@@ -152,7 +153,7 @@
 			compatible = "samsung,exynos4210-fimc";
 			reg = <0x11830000 0x1000>;
 			interrupts = <0 87 0>;
-			clocks = <&clock 259>, <&clock 131>;
+			clocks = <&clock CLK_FIMC3>, <&clock CLK_SCLK_FIMC3>;
 			clock-names = "fimc", "sclk_fimc";
 			samsung,power-domain = <&pd_cam>;
 			samsung,sysreg = <&sys_reg>;
@@ -163,7 +164,7 @@
 			compatible = "samsung,exynos4210-csis";
 			reg = <0x11880000 0x4000>;
 			interrupts = <0 78 0>;
-			clocks = <&clock 260>, <&clock 134>;
+			clocks = <&clock CLK_CSIS0>, <&clock CLK_SCLK_CSIS0>;
 			clock-names = "csis", "sclk_csis";
 			bus-width = <4>;
 			samsung,power-domain = <&pd_cam>;
@@ -178,7 +179,7 @@
 			compatible = "samsung,exynos4210-csis";
 			reg = <0x11890000 0x4000>;
 			interrupts = <0 80 0>;
-			clocks = <&clock 261>, <&clock 135>;
+			clocks = <&clock CLK_CSIS1>, <&clock CLK_SCLK_CSIS1>;
 			clock-names = "csis", "sclk_csis";
 			bus-width = <2>;
 			samsung,power-domain = <&pd_cam>;
@@ -194,7 +195,7 @@
 		compatible = "samsung,s3c2410-wdt";
 		reg = <0x10060000 0x100>;
 		interrupts = <0 43 0>;
-		clocks = <&clock 345>;
+		clocks = <&clock CLK_WDT>;
 		clock-names = "watchdog";
 		status = "disabled";
 	};
@@ -203,7 +204,7 @@
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x10070000 0x100>;
 		interrupts = <0 44 0>, <0 45 0>;
-		clocks = <&clock 346>;
+		clocks = <&clock CLK_RTC>;
 		clock-names = "rtc";
 		status = "disabled";
 	};
@@ -212,7 +213,7 @@
 		compatible = "samsung,s5pv210-keypad";
 		reg = <0x100A0000 0x100>;
 		interrupts = <0 109 0>;
-		clocks = <&clock 347>;
+		clocks = <&clock CLK_KEYIF>;
 		clock-names = "keypad";
 		status = "disabled";
 	};
@@ -221,7 +222,7 @@
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12510000 0x100>;
 		interrupts = <0 73 0>;
-		clocks = <&clock 297>, <&clock 145>;
+		clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
 		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
 	};
@@ -230,7 +231,7 @@
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12520000 0x100>;
 		interrupts = <0 74 0>;
-		clocks = <&clock 298>, <&clock 146>;
+		clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
 		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
 	};
@@ -239,7 +240,7 @@
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12530000 0x100>;
 		interrupts = <0 75 0>;
-		clocks = <&clock 299>, <&clock 147>;
+		clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
 		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
 	};
@@ -248,7 +249,7 @@
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12540000 0x100>;
 		interrupts = <0 76 0>;
-		clocks = <&clock 300>, <&clock 148>;
+		clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
 		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
 	};
@@ -257,7 +258,7 @@
 		compatible = "samsung,exynos4210-ehci";
 		reg = <0x12580000 0x100>;
 		interrupts = <0 70 0>;
-		clocks = <&clock 304>;
+		clocks = <&clock CLK_USB_HOST>;
 		clock-names = "usbhost";
 		status = "disabled";
 	};
@@ -266,7 +267,7 @@
 		compatible = "samsung,exynos4210-ohci";
 		reg = <0x12590000 0x100>;
 		interrupts = <0 70 0>;
-		clocks = <&clock 304>;
+		clocks = <&clock CLK_USB_HOST>;
 		clock-names = "usbhost";
 		status = "disabled";
 	};
@@ -276,7 +277,7 @@
 		reg = <0x13400000 0x10000>;
 		interrupts = <0 94 0>;
 		samsung,power-domain = <&pd_mfc>;
-		clocks = <&clock 273>;
+		clocks = <&clock CLK_MFC>;
 		clock-names = "mfc";
 		status = "disabled";
 	};
@@ -285,7 +286,7 @@
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13800000 0x100>;
 		interrupts = <0 52 0>;
-		clocks = <&clock 312>, <&clock 151>;
+		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
 		clock-names = "uart", "clk_uart_baud0";
 		status = "disabled";
 	};
@@ -294,7 +295,7 @@
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13810000 0x100>;
 		interrupts = <0 53 0>;
-		clocks = <&clock 313>, <&clock 152>;
+		clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
 		clock-names = "uart", "clk_uart_baud0";
 		status = "disabled";
 	};
@@ -303,7 +304,7 @@
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13820000 0x100>;
 		interrupts = <0 54 0>;
-		clocks = <&clock 314>, <&clock 153>;
+		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
 		clock-names = "uart", "clk_uart_baud0";
 		status = "disabled";
 	};
@@ -312,7 +313,7 @@
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13830000 0x100>;
 		interrupts = <0 55 0>;
-		clocks = <&clock 315>, <&clock 154>;
+		clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
 		clock-names = "uart", "clk_uart_baud0";
 		status = "disabled";
 	};
@@ -323,7 +324,7 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13860000 0x100>;
 		interrupts = <0 58 0>;
-		clocks = <&clock 317>;
+		clocks = <&clock CLK_I2C0>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c0_bus>;
@@ -336,7 +337,7 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13870000 0x100>;
 		interrupts = <0 59 0>;
-		clocks = <&clock 318>;
+		clocks = <&clock CLK_I2C1>;
 		clock-names = "i2c";
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c1_bus>;
@@ -349,7 +350,7 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13880000 0x100>;
 		interrupts = <0 60 0>;
-		clocks = <&clock 319>;
+		clocks = <&clock CLK_I2C2>;
 		clock-names = "i2c";
 		status = "disabled";
 	};
@@ -360,7 +361,7 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13890000 0x100>;
 		interrupts = <0 61 0>;
-		clocks = <&clock 320>;
+		clocks = <&clock CLK_I2C3>;
 		clock-names = "i2c";
 		status = "disabled";
 	};
@@ -371,7 +372,7 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138A0000 0x100>;
 		interrupts = <0 62 0>;
-		clocks = <&clock 321>;
+		clocks = <&clock CLK_I2C4>;
 		clock-names = "i2c";
 		status = "disabled";
 	};
@@ -382,7 +383,7 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138B0000 0x100>;
 		interrupts = <0 63 0>;
-		clocks = <&clock 322>;
+		clocks = <&clock CLK_I2C5>;
 		clock-names = "i2c";
 		status = "disabled";
 	};
@@ -393,7 +394,7 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138C0000 0x100>;
 		interrupts = <0 64 0>;
-		clocks = <&clock 323>;
+		clocks = <&clock CLK_I2C6>;
 		clock-names = "i2c";
 		status = "disabled";
 	};
@@ -404,7 +405,7 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138D0000 0x100>;
 		interrupts = <0 65 0>;
-		clocks = <&clock 324>;
+		clocks = <&clock CLK_I2C7>;
 		clock-names = "i2c";
 		status = "disabled";
 	};
@@ -417,7 +418,7 @@
 		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 327>, <&clock 159>;
+		clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
 		clock-names = "spi", "spi_busclk0";
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi0_bus>;
@@ -432,7 +433,7 @@
 		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 328>, <&clock 160>;
+		clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
 		clock-names = "spi", "spi_busclk0";
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi1_bus>;
@@ -447,7 +448,7 @@
 		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&clock 329>, <&clock 161>;
+		clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
 		clock-names = "spi", "spi_busclk0";
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi2_bus>;
@@ -458,7 +459,7 @@
 		compatible = "samsung,exynos4210-pwm";
 		reg = <0x139D0000 0x1000>;
 		interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;
-		clocks = <&clock 336>;
+		clocks = <&clock CLK_PWM>;
 		clock-names = "timers";
 		#pwm-cells = <2>;
 		status = "disabled";
@@ -475,7 +476,7 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12680000 0x1000>;
 			interrupts = <0 35 0>;
-			clocks = <&clock 292>;
+			clocks = <&clock CLK_PDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
@@ -486,7 +487,7 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12690000 0x1000>;
 			interrupts = <0 36 0>;
-			clocks = <&clock 293>;
+			clocks = <&clock CLK_PDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
@@ -497,7 +498,7 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12850000 0x1000>;
 			interrupts = <0 34 0>;
-			clocks = <&clock 279>;
+			clocks = <&clock CLK_MDMA>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
@@ -511,7 +512,7 @@
 		reg = <0x11c00000 0x20000>;
 		interrupt-names = "fifo", "vsync", "lcd_sys";
 		interrupts = <11 0>, <11 1>, <11 2>;
-		clocks = <&clock 140>, <&clock 283>;
+		clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>;
 		clock-names = "sclk_fimd", "fimd";
 		samsung,power-domain = <&pd_lcd0>;
 		status = "disabled";