ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 643 deletions

diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
deleted file mode 100644
index d586189966da..000000000000
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ /dev/null
@@ -1,643 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos5250 based Arndale board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/clock/samsung,s2mps11.h>
-#include <dt-bindings/sound/samsung-i2s.h>
-#include "exynos5250.dtsi"
-
-/ {
-	model = "Insignal Arndale evaluation board based on Exynos5250";
-	compatible = "insignal,arndale", "samsung,exynos5250", "samsung,exynos5";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
-	};
-
-	aliases {
-		mmc0 = &mmc_0;
-		mmc1 = &mmc_2;
-	};
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		key-menu {
-			label = "SW-TACT2";
-			gpios = <&gpx1 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_MENU>;
-			wakeup-source;
-		};
-
-		key-home {
-			label = "SW-TACT3";
-			gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-			wakeup-source;
-		};
-
-		key-up {
-			label = "SW-TACT4";
-			gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_UP>;
-			wakeup-source;
-		};
-
-		key-down {
-			label = "SW-TACT5";
-			gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_DOWN>;
-			wakeup-source;
-		};
-
-		key-back {
-			label = "SW-TACT6";
-			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-			wakeup-source;
-		};
-
-		key-wakeup {
-			label = "SW-TACT7";
-			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WAKEUP>;
-			wakeup-source;
-		};
-	};
-
-	/*
-	 * For unknown reasons HDMI-DDC does not work with Exynos I2C
-	 * controllers. Lets use software I2C over GPIO pins as a workaround.
-	 */
-	i2c_ddc: i2c-10 {
-		compatible = "i2c-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_gpio_bus>;
-		sda-gpios = <&gpa0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpa0 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-	};
-
-	panel: panel {
-		compatible = "boe,hv070wsa-100";
-		power-supply = <&vcc_3v3_reg>;
-		enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>;
-		port {
-			panel_ep: endpoint {
-				remote-endpoint = <&bridge_out_ep>;
-			};
-		};
-	};
-
-	main_dc_reg: regulator-0 {
-		compatible = "regulator-fixed";
-		regulator-name = "MAIN_DC";
-		regulator-always-on;
-	};
-
-	mmc_reg: regulator-1 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_MMC";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		regulator-always-on;
-	};
-
-	reg_hdmi_en: regulator-2 {
-		compatible = "regulator-fixed";
-		regulator-name = "hdmi-en";
-		regulator-always-on;
-	};
-
-	vcc_1v2_reg: regulator-3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_1V2";
-		regulator-min-microvolt = <1200000>;
-		regulator-max-microvolt = <1200000>;
-		regulator-always-on;
-	};
-
-	vcc_1v8_reg: regulator-4 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	vcc_3v3_reg: regulator-5 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	sound {
-		compatible = "samsung,arndale-wm1811";
-		samsung,audio-cpu = <&i2s0>;
-		samsung,audio-codec = <&wm1811>;
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	// SMSC USB3503 connected in hardware only mode as a PHY
-	usb_hub: usb-hub {
-		compatible = "smsc,usb3503a";
-
-		reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
-		connect-gpios = <&gpd1 7 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&clock {
-	assigned-clocks = <&clock CLK_FOUT_EPLL>;
-	assigned-clock-rates = <49152000>;
-};
-
-&clock_audss {
-	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
-	assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
-};
-
-&cpu0 {
-	cpu0-supply = <&buck2_reg>;
-};
-
-&dsi_0 {
-	vddcore-supply = <&ldo8_reg>;
-	vddio-supply = <&ldo10_reg>;
-	samsung,pll-clock-frequency = <24000000>;
-	samsung,burst-clock-frequency = <320000000>;
-	samsung,esc-clock-frequency = <10000000>;
-	status = "okay";
-
-	bridge@0 {
-		reg = <0>;
-		compatible = "toshiba,tc358764";
-		vddc-supply = <&vcc_1v2_reg>;
-		vddio-supply = <&vcc_1v8_reg>;
-		vddlvds-supply = <&vcc_3v3_reg>;
-		reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@1 {
-				reg = <1>;
-				bridge_out_ep: endpoint {
-					remote-endpoint = <&panel_ep>;
-				};
-			};
-		};
-	};
-};
-
-&fimd {
-	status = "okay";
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_hpd>;
-	status = "okay";
-	ddc = <&i2c_ddc>;
-	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
-	vdd_osc-supply = <&ldo10_reg>;
-	vdd_pll-supply = <&ldo8_reg>;
-	vdd-supply = <&ldo8_reg>;
-};
-
-&i2c_0 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <20000>;
-	samsung,i2c-slave-addr = <0x66>;
-
-	pmic@66 {
-		compatible = "samsung,s5m8767-pmic";
-		reg = <0x66>;
-		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&s5m8767_irq>;
-		wakeup-source;
-
-		vinb1-supply = <&main_dc_reg>;
-		vinb2-supply = <&main_dc_reg>;
-		vinb3-supply = <&main_dc_reg>;
-		vinb4-supply = <&main_dc_reg>;
-		vinb5-supply = <&main_dc_reg>;
-		vinb6-supply = <&main_dc_reg>;
-		vinb7-supply = <&main_dc_reg>;
-		vinb8-supply = <&main_dc_reg>;
-		vinb9-supply = <&main_dc_reg>;
-
-		vinl1-supply = <&buck7_reg>;
-		vinl2-supply = <&buck7_reg>;
-		vinl3-supply = <&buck7_reg>;
-		vinl4-supply = <&main_dc_reg>;
-		vinl5-supply = <&main_dc_reg>;
-		vinl6-supply = <&main_dc_reg>;
-		vinl7-supply = <&main_dc_reg>;
-		vinl8-supply = <&buck8_reg>;
-		vinl9-supply = <&buck8_reg>;
-
-		s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>,
-					      <&gpd1 1 GPIO_ACTIVE_HIGH>,
-					      <&gpd1 2 GPIO_ACTIVE_HIGH>;
-		s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
-					     <&gpx2 4 GPIO_ACTIVE_HIGH>,
-					     <&gpx2 5 GPIO_ACTIVE_HIGH>;
-
-		s5m8767_osc: clocks {
-			compatible = "samsung,s5m8767-clk";
-			#clock-cells = <1>;
-			clock-output-names = "s5m8767_ap", "unused1", "unused2";
-		};
-
-		regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "VDD_ALIVE_1.0V";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "VDD_28IO_DP_1.35V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "VDD_COMMON1_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo4_reg: LDO4 {
-				regulator-name = "VDD_IOPERI_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				op_mode = <1>;
-			};
-
-			ldo5_reg: LDO5 {
-				regulator-name = "VDD_EXT_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "VDD_MPLL_1.1V";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "VDD_XPLL_1.1V";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "VDD_COMMON2_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo9_reg: LDO9 {
-				regulator-name = "VDD_33ON_3.0V";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				op_mode = <1>;
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "VDD_COMMON3_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "VDD_ABB2_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo12_reg: LDO12 {
-				regulator-name = "VDD_USB_3.0V";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo13_reg: LDO13 {
-				regulator-name = "VDDQ_C2C_W_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "VDD18_ABB0_3_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "VDD10_COMMON4_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "VDD18_HSIC_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo17_reg: LDO17 {
-				regulator-name = "VDDQ_MMC2_3_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo18_reg: LDO18 {
-				regulator-name = "VDD_33ON_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				op_mode = <1>;
-			};
-
-			ldo22_reg: LDO22 {
-				regulator-name = "EXT_33_OFF";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				op_mode = <1>;
-			};
-
-			ldo23_reg: LDO23 {
-				regulator-name = "EXT_28_OFF";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				op_mode = <1>;
-			};
-
-			ldo25_reg: LDO25 {
-				regulator-name = "PVDD_LDO25";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				op_mode = <1>;
-			};
-
-			ldo26_reg: LDO26 {
-				regulator-name = "EXT_18_OFF";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				op_mode = <1>;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "VDD_MIF";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "VDD_ARM";
-				regulator-min-microvolt = <912500>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "VDD_INT";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "VDD_G3D";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "VDD_MEM_1.35V";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1355000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			buck7_reg: BUCK7 {
-				regulator-name = "PVDD_BUCK7";
-				regulator-always-on;
-				op_mode = <1>;
-			};
-
-			buck8_reg: BUCK8 {
-				regulator-name = "PVDD_BUCK8";
-				regulator-always-on;
-				op_mode = <1>;
-			};
-
-			buck9_reg: BUCK9 {
-				regulator-name = "VDD_33_OFF_EXT1";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <3000000>;
-				op_mode = <1>;
-			};
-		};
-	};
-};
-
-&i2c_3 {
-	status = "okay";
-
-	wm1811: audio-codec@1a {
-		compatible = "wlf,wm1811";
-		reg = <0x1a>;
-		clocks = <&i2s0 CLK_I2S_CDCLK>;
-		clock-names = "MCLK1";
-
-		AVDD2-supply = <&main_dc_reg>;
-		CPVDD-supply = <&main_dc_reg>;
-		DBVDD1-supply = <&main_dc_reg>;
-		DBVDD2-supply = <&main_dc_reg>;
-		DBVDD3-supply = <&main_dc_reg>;
-		LDO1VDD-supply = <&main_dc_reg>;
-		SPKVDD1-supply = <&main_dc_reg>;
-		SPKVDD2-supply = <&main_dc_reg>;
-
-		wlf,ldo1ena-gpios = <&gpb0 0 GPIO_ACTIVE_HIGH>;
-		wlf,ldo2ena-gpios = <&gpb0 1 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&i2c_8 {
-	status = "okay";
-	/* used by HDMI PHY */
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-};
-
-&i2c_9 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <40000>;
-};
-
-&i2s0 {
-	assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
-	assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
-	status = "okay";
-};
-
-&i2s0_bus {
-	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;
-};
-
-&mali {
-	mali-supply = <&buck4_reg>;
-	status = "okay";
-};
-
-&mixer {
-	status = "okay";
-};
-
-&mmc_0 {
-	status = "okay";
-	broken-cd;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	vmmc-supply = <&mmc_reg>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-	bus-width = <8>;
-	cap-mmc-highspeed;
-	mmc-ddr-1_8v;
-};
-
-&mmc_2 {
-	status = "okay";
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	vmmc-supply = <&mmc_reg>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-	bus-width = <4>;
-	disable-wp;
-	cap-sd-highspeed;
-};
-
-&pinctrl_0 {
-	s5m8767_irq: s5m8767-irq-pins {
-		samsung,pins = "gpx3-2";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-};
-
-&rtc {
-	clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>;
-	clock-names = "rtc", "rtc_src";
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&sata_phy {
-	status = "okay";
-	samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
-};
-
-&sata_phy_i2c {
-	status = "okay";
-};
-
-&usbdrd {
-	vdd10-supply = <&ldo15_reg>;
-	vdd33-supply = <&ldo12_reg>;
-};