ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 162 deletions

diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
deleted file mode 100644
index 188639738dc3..000000000000
--- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
+++ /dev/null
@@ -1,162 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Markus Pargmann, Pengutronix
- */
-
-#include "imx27-phytec-phycard-s-som.dtsi"
-
-/ {
-	model = "Phytec pca100 rapid development kit";
-	compatible = "phytec,imx27-pca100-rdk", "phytec,imx27-pca100", "fsl,imx27";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	display: display {
-		model = "Primeview-PD050VL1";
-		bits-per-pixel = <16>;  /* non-standard but required */
-		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: 640x480 {
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <112>;
-				hfront-porch = <36>;
-				hsync-len = <32>;
-				vback-porch = <33>;
-				vfront-porch = <33>;
-				vsync-len = <2>;
-				clock-frequency = <25000000>;
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3v3: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&fb {
-	display = <&display>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	adc@64 {
-		compatible = "maxim,max1037";
-		vcc-supply = <&reg_3v3>;
-		reg = <0x64>;
-	};
-};
-
-&iomuxc {
-	imx27-phycard-s-rdk {
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX27_PAD_I2C_DATA__I2C_DATA 0x0
-				MX27_PAD_I2C_CLK__I2C_CLK 0x0
-			>;
-		};
-
-		pinctrl_owire1: owire1grp {
-			fsl,pins = <
-				MX27_PAD_RTCK__OWIRE 0x0
-			>;
-		};
-
-		pinctrl_sdhc2: sdhc2grp {
-			fsl,pins = <
-				MX27_PAD_SD2_CLK__SD2_CLK 0x0
-				MX27_PAD_SD2_CMD__SD2_CMD 0x0
-				MX27_PAD_SD2_D0__SD2_D0 0x0
-				MX27_PAD_SD2_D1__SD2_D1 0x0
-				MX27_PAD_SD2_D2__SD2_D2 0x0
-				MX27_PAD_SD2_D3__SD2_D3 0x0
-				MX27_PAD_SSI3_RXDAT__GPIO3_29 0x0 /* CD */
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX27_PAD_UART1_TXD__UART1_TXD 0x0
-				MX27_PAD_UART1_RXD__UART1_RXD 0x0
-				MX27_PAD_UART1_CTS__UART1_CTS 0x0
-				MX27_PAD_UART1_RTS__UART1_RTS 0x0
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX27_PAD_UART2_TXD__UART2_TXD 0x0
-				MX27_PAD_UART2_RXD__UART2_RXD 0x0
-				MX27_PAD_UART2_CTS__UART2_CTS 0x0
-				MX27_PAD_UART2_RTS__UART2_RTS 0x0
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX27_PAD_UART3_TXD__UART3_TXD 0x0
-				MX27_PAD_UART3_RXD__UART3_RXD 0x0
-				MX27_PAD_UART3_CTS__UART3_CTS 0x0
-				MX27_PAD_UART3_RTS__UART3_RTS 0x0
-			>;
-		};
-	};
-};
-
-&owire {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_owire1>;
-	status = "okay";
-};
-
-&sdhci2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdhc2>;
-	cd-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&uart1 {
-	uart-has-rtscts;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	uart-has-rtscts;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	uart-has-rtscts;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};