ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 779 deletions

diff --git a/arch/arm/boot/dts/imx6q-bosch-acc.dts b/arch/arm/boot/dts/imx6q-bosch-acc.dts
deleted file mode 100644
index 8263bfef9bf8..000000000000
--- a/arch/arm/boot/dts/imx6q-bosch-acc.dts
+++ /dev/null
@@ -1,779 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Support for the i.MX6-based Bosch ACC board.
- *
- * Copyright (C) 2016 Garz & Fricke GmbH
- * Copyright (C) 2018 DENX Software Engineering GmbH, Heiko Schocher <hs@denx.de>
- * Copyright (C) 2018 DENX Software Engineering GmbH, Niel Fourie <lusus@denx.de>
- * Copyright (C) 2019-2021 Bosch Thermotechnik GmbH, Matthias Winker <matthias.winker@bosch.com>
- * Copyright (C) 2022 DENX Software Engineering GmbH, Philip Oberfichtner <pro@denx.de>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include "imx6q.dtsi"
-
-/ {
-	model = "Bosch ACC";
-	compatible = "bosch,imx6q-acc", "fsl,imx6q";
-
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		mmc0 = &usdhc4;
-		mmc1 = &usdhc2;
-		serial0 = &uart2;
-		serial1 = &uart1;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	backlight_lvds: backlight-lvds {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 200000>;
-		brightness-levels = <0 61 499 1706 4079 8022 13938 22237 33328 47623 65535>;
-		num-interpolated-steps = <10>;
-		default-brightness-level = <60>;
-		power-supply = <&reg_lcd>;
-	};
-
-	panel {
-		compatible = "dataimage,fg1001l0dsswmg01";
-		backlight = <&backlight_lvds>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-
-	refclk: refclk {
-		compatible = "fixed-factor-clock";
-		#clock-cells = <0>;
-		clocks = <&clks IMX6QDL_CLK_CKO2>;
-		clock-div = <1>;
-		clock-mult = <1>;
-		clock-output-names = "12mhz_refclk";
-		assigned-clocks = <&clks IMX6QDL_CLK_CKO>,
-				  <&clks IMX6QDL_CLK_CKO2>,
-				  <&clks IMX6QDL_CLK_CKO2_SEL>;
-		assigned-clock-parents = <&clks IMX6QDL_CLK_CKO2>,
-					 <&clks IMX6QDL_CLK_CKO2_PODF>,
-					 <&clks IMX6QDL_CLK_OSC>;
-		assigned-clock-rates = <0>, <12000000>, <0>;
-	};
-
-	cpus {
-		cpu0: cpu@0 {
-			operating-points = <
-				/* kHz    uV */
-				1200000 1275000
-				996000  1225000
-				852000  1225000
-				792000  1150000
-				396000  950000
-			>;
-			fsl,soc-operating-points = <
-				/* ARM kHz  SOC-PU uV */
-				1200000 1225000
-				996000	1175000
-				852000	1175000
-				792000	1150000
-				396000	1150000
-			>;
-		};
-
-		cpu1: cpu@1 {
-			operating-points = <
-				/* kHz    uV */
-				1200000 1275000
-				996000  1225000
-				852000  1225000
-				792000  1150000
-				396000  950000
-			>;
-			fsl,soc-operating-points = <
-				/* ARM kHz  SOC-PU uV */
-				1200000 1225000
-				996000	1175000
-				852000	1175000
-				792000	1150000
-				396000	1150000
-			>;
-		};
-	};
-
-	pwm-leds {
-		compatible = "pwm-leds";
-
-		led_red: led-0 {
-			color = <LED_COLOR_ID_RED>;
-			max-brightness = <248>;
-			default-state = "off";
-			pwms = <&pwm2 0 500000>;
-		};
-
-		led_white: led-1 {
-			color = <LED_COLOR_ID_WHITE>;
-			max-brightness = <248>;
-			default-state = "off";
-			pwms = <&pwm3 0 500000>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reset_gpio_led>;
-
-		led-2 {
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-
-	reg_5p0: regulator-5p0 {
-		compatible = "regulator-fixed";
-		regulator-name = "5p0";
-	};
-
-	reg_vin: regulator-vin {
-		compatible = "regulator-fixed";
-		regulator-name = "VIN";
-		regulator-min-microvolt = <4500000>;
-		regulator-max-microvolt = <4500000>;
-		regulator-always-on;
-		vin-supply = <&reg_5p0>;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usb_h1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		vin-supply = <&reg_5p0>;
-	};
-
-	reg_usb_h2_vbus: regulator-usb-h2-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h2_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&reg_5p0> ;
-		regulator-always-on;
-	};
-
-	reg_vsnvs: regulator-vsnvs {
-		compatible = "regulator-fixed";
-		regulator-name = "VSNVS_3V0";
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-		regulator-always-on;
-		vin-supply = <&reg_5p0>;
-	};
-
-	reg_lcd: regulator-lcd {
-		compatible = "regulator-fixed";
-		regulator-name = "LCD0 POWER";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lcd_enable>;
-		gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-
-	reg_dac: regulator-dac {
-		compatible = "regulator-fixed";
-		regulator-name = "vref_dac";
-		regulator-min-microvolt = <20000>;
-		regulator-max-microvolt = <20000>;
-		vin-supply = <&reg_5p0> ;
-		regulator-boot-on;
-	};
-
-	reg_sw4: regulator-sw4 {
-		compatible = "regulator-fixed";
-		regulator-name = "SW4_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		vin-supply = <&reg_5p0>;
-	};
-
-	reg_sys: regulator-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "SYS_4V2";
-		regulator-min-microvolt = <4200000>;
-		regulator-max-microvolt = <4200000>;
-		regulator-always-on;
-		vin-supply = <&reg_5p0>;
-	};
-};
-
-&reg_arm {
-	vin-supply = <&sw2_reg>;
-};
-
-&reg_soc {
-	vin-supply = <&sw1c_reg>;
-};
-
-&reg_vdd1p1 {
-	vin-supply = <&reg_vsnvs>;
-};
-
-&reg_vdd2p5 {
-	vin-supply = <&reg_vsnvs>;
-};
-
-&reg_vdd3p0 {
-	vin-supply = <&reg_vsnvs>;
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		<&clks IMX6QDL_CLK_ENET>,
-		<&clks IMX6QDL_CLK_ENET>,
-		<&clks IMX6QDL_CLK_ENET_REF>;
-	clock-names = "ipg", "ahb", "ptp", "enet_out";
-	phy-mode = "rmii";
-	phy-supply = <&reg_sw4>;
-	phy-handle = <&ethphy>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-			interrupt-parent = <&gpio1>;
-			interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
-			smsc,disable-energy-detect;
-		};
-	};
-};
-
-&gpu_vg {
-	status = "disabled";
-};
-
-&gpu_2d {
-	status = "disabled";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	pmic: pmic@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1c_reg: sw1c {
-				regulator-name = "VDD_SOC (sw1abc)";
-				regulator-min-microvolt = <1275000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-name = "VDD_ARM (sw2)";
-				regulator-min-microvolt = <1050000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw3a_reg: sw3a {
-				compatible = "regulator-fixed";
-				regulator-name = "DDR_1V5a";
-				regulator-boot-on;
-				regulator-always-on;
-
-			};
-
-			sw3b_reg: sw3b {
-				compatible = "regulator-fixed";
-				regulator-name = "DDR_1V5b";
-				regulator-boot-on;
-				regulator-always-on;
-
-			};
-
-			sw4_reg: sw4 {
-				regulator-name = "AUX 3V15 (sw4)";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-				regulator-boot-on;
-				regulator-always-on;
-				status = "disabled";
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	lm75: sensor@49 {
-		compatible = "national,lm75b";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lm75>;
-		reg = <0x49>;
-	};
-
-	eeprom: eeprom@50 {
-		compatible = "atmel,24c32";
-		reg = <0x50>;
-		pagesize = <32>;
-	};
-
-	rtc: rtc@51 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rtc>;
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	eeprom_ext: eeprom@50 {
-		compatible = "atmel,24c32";
-		reg = <0x50>;
-		pagesize = <32>;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	usb3503: usb@8 {
-		compatible = "smsc,usb3503";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb3503>;
-		reg = <0x08>;
-		connect-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; /* Old: 0, SS: HIGH */
-		intn-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; /* Old: 1, SS: HIGH */
-		reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; /* Old: 0, SS: HIGH */
-		initial-mode = <1>;
-		clocks = <&refclk>;
-		clock-names = "refclk";
-		refclk-frequency = <12000000>;
-	};
-
-	exc3000: touchscreen@2a {
-		compatible = "eeti,exc3000";
-		reg = <0x2a>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ctouch>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
-		touchscreen-size-x = <4096>;
-		touchscreen-size-y = <4096>;
-	};
-
-	vcnl4035: light-sensor@60 {
-		compatible = "vishay,vcnl4035";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_proximity>;
-		reg = <0x60>;
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds0: lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <24>;
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm2 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "okay";
-};
-
-&pwm3 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pwm4 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	rts-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
-	linux,rs485-enabled-at-boot-time;
-	rs485-rx-during-tx;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usbh2 {
-	pinctrl-names = "idle", "active";
-	pinctrl-0 = <&pinctrl_usbh2_idle>;
-	pinctrl-1 = <&pinctrl_usbh2_active>;
-	vbus-supply = <&reg_usb_h2_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	vbus-supply = <&reg_usb_otg_vbus>;
-	disable-over-current;
-	dr_mode = "otg";
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	status = "okay";
-};
-
-&usbphynop1 {
-	clocks = <&clks IMX6QDL_CLK_USBPHY1>;
-	clock-names = "main_clk";
-	vcc-supply = <&reg_usb_h1_vbus>;
-};
-
-&usbphynop2 {
-	vcc-supply = <&reg_usb_h2_vbus>;
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	keep-power-in-suspend;
-	wakeup-source;
-	voltage-ranges = <3300 3300>;
-	vmmc-supply = <&reg_sw4>;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <8>;
-	non-removable;
-	no-1-8-v;
-	keep-power-in-suspend;
-	voltage-ranges = <3300 3300>;
-	vmmc-supply = <&reg_sw4>;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog1>;
-	fsl,ext-reset-output;
-	timeout-sec = <10>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
-			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23	0x1b0b0	/* FEC INT */
-			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
-			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x0001b098
-			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
-			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
-			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x0001b098
-			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x0001b098
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-		>;
-	};
-
-	pinctrl_reset_gpio_led: reset-gpio-led-grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18		0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b810
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b810
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__I2C3_SCL  0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_lcd_enable: lcdenablegrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D23__GPIO3_IO23  0x1b0b0 /* lcd enable */
-			MX6QDL_PAD_EIM_D16__GPIO3_IO16  0x1b0b0 /* sel6_8 */
-		>;
-	};
-
-	pinctrl_lm75: lm75grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
-		>;
-	};
-
-	pinctrl_proximity: proximitygrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11  0x1b0b0
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x0001b0b0
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x0001b0b0
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x0001b0b0
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x0001b0b0
-		>;
-	};
-
-	pinctrl_rtc: rtc-grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0 /* RTC INT */
-		>;
-	};
-
-	pinctrl_ctouch: ctouch-grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* CTOUCH_INT */
-			MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x0001b0b0 /* CTOUCH_RESET */
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
-			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
-			MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x0001b0b0
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x1b0b1
-			MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x1b0b1
-			MX6QDL_PAD_EIM_D28__UART2_CTS_B 0x1b0b1
-			MX6QDL_PAD_EIM_D29__UART2_RTS_B 0x1b0b1
-		>;
-	};
-
-	pinctrl_usbh2_idle: usbh2-idle-grp {
-		fsl,pins = <
-			MX6QDL_PAD_RGMII_TXC__USB_H2_DATA      0x00013018
-			MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x00013018
-		>;
-	};
-
-	pinctrl_usbh2_active: usbh2-active-grp {
-		fsl,pins = <
-			MX6QDL_PAD_RGMII_TXC__USB_H2_DATA      0x00013018
-			MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x00017018
-		>;
-	};
-
-	pinctrl_usb3503: usb3503-grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1    0x00000018
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12     0x1b0b0 /* USB INT */
-			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x0001b0b0 /* USB Reset */
-			MX6QDL_PAD_SD1_DAT0__GPIO1_IO16    0x1b0b0 /* USB Connect */
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID	0x17059
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x00017069
-			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x00010038
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x00017069
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x00017069
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x00017069
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x00017069
-			MX6QDL_PAD_GPIO_4__SD2_CD_B    0x0001b0b0
-		>;
-	};
-
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD    0x00017059
-			MX6QDL_PAD_SD4_CLK__SD4_CLK    0x00010059
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x00017059
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x00017059
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x00017059
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x00017059
-			MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x00017059
-			MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x00017059
-			MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x00017059
-			MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x00017059
-		>;
-	};
-
-	pinctrl_wdog1: wdoggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0
-		>;
-	};
-};