ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 393 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/microchip/at91sam9m10g45ek.dts b/arch/arm/boot/dts/microchip/at91sam9m10g45ek.dts
new file mode 100644
index 000000000000..7f45e81ca165
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9m10g45ek.dts
@@ -0,0 +1,393 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9m10g45ek.dts - Device Tree file for AT91SAM9M10G45-EK board
+ *
+ *  Copyright (C) 2011 Atmel,
+ *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "at91sam9g45.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Atmel AT91SAM9M10G45-EK";
+	compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M root=/dev/mtdblock1 rw rootfstype=jffs2";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@70000000 {
+		reg = <0x70000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+		      clock-frequency = <32768>;
+		};
+
+		main_xtal {
+		      clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			tcb0: timer@fff7c000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usart1: serial@fff90000 {
+				pinctrl-0 =
+					<&pinctrl_usart1
+					 &pinctrl_usart1_rts
+					 &pinctrl_usart1_cts>;
+				status = "okay";
+			};
+
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			i2c0: i2c@fff84000 {
+				status = "okay";
+				ov2640: camera@30 {
+					compatible = "ovti,ov2640";
+					reg = <0x30>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+					resetb-gpios = <&pioD 12 GPIO_ACTIVE_LOW>;
+					pwdn-gpios = <&pioD 13 GPIO_ACTIVE_HIGH>;
+					clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+					clock-names = "xvclk";
+					assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+					assigned-clock-rates = <25000000>;
+
+					port {
+						ov2640_0: endpoint {
+							remote-endpoint = <&isi_0>;
+							bus-width = <8>;
+						};
+					};
+				};
+			};
+
+			i2c1: i2c@fff88000 {
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+			mmc0: mmc@fff80000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_slot0_clk_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 10 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			mmc1: mmc@fffd0000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc1
+					&pinctrl_mmc1_slot0_clk_cmd_dat0
+					&pinctrl_mmc1_slot0_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 11 GPIO_ACTIVE_HIGH>;
+					wp-gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			pinctrl@fffff200 {
+				camera_sensor {
+					pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
+						atmel,pins =
+							<AT91_PIOB 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_sensor_reset: sensor_reset-0 {
+						atmel,pins =
+							<AT91_PIOD 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_sensor_power: sensor_power-0 {
+						atmel,pins =
+							<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD10 gpio CD pin pull up and deglitch */
+					};
+				};
+
+				mmc1 {
+					pinctrl_board_mmc1: mmc1-board {
+						atmel,pins =
+							<AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH	/* PD11 gpio CD pin pull up and deglitch */
+							 AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PD29 gpio WP pin pull up */
+					};
+				};
+
+				pwm0 {
+					pinctrl_pwm_leds: pwm-led {
+						atmel,pins =
+							<AT91_PIOD 0  AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PD0 periph B */
+							 AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PD31 periph B */
+					};
+				};
+			};
+
+			spi0: spi@fffa4000{
+				status = "okay";
+				cs-gpios = <&pioB 3 0>, <0>, <0>, <0>;
+				flash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <13000000>;
+					reg = <0>;
+				};
+			};
+
+			usb2: gadget@fff78000 {
+				atmel,vbus-gpio = <&pioB 19 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			ac97: sound@fffac000 {
+				status = "okay";
+			};
+
+			adc0: adc@fffb0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					&pinctrl_adc0_ad5
+					&pinctrl_adc0_ad6
+					&pinctrl_adc0_ad7>;
+				atmel,adc-ts-wires = <4>;
+				status = "okay";
+			};
+
+			isi@fffb4000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isi_data_0_7>;
+				status = "okay";
+				port {
+					isi_0: endpoint {
+						remote-endpoint = <&ov2640_0>;
+						bus-width = <8>;
+						vsync-active = <1>;
+						hsync-active = <1>;
+					};
+				};
+			};
+
+			pwm0: pwm@fffb8000 {
+				status = "okay";
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm_leds>;
+			};
+
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+				status = "okay";
+			};
+
+			gpbr: syscon@fffffd60 {
+				status = "okay";
+			};
+
+			rtc@fffffdb0 {
+				status = "okay";
+			};
+		};
+
+		fb0: fb@500000 {
+			display = <&display0>;
+			status = "okay";
+
+			display0: panel {
+				bits-per-pixel = <32>;
+				atmel,lcdcon-backlight;
+				atmel,dmacon = <0x1>;
+				atmel,lcdcon2 = <0x80008002>;
+				atmel,guard-time = <9>;
+				atmel,lcd-wiring-mode = "RGB";
+
+				display-timings {
+					native-mode = <&timing0>;
+					timing0: timing0 {
+						clock-frequency = <9000000>;
+						hactive = <480>;
+						vactive = <272>;
+						hback-porch = <1>;
+						hfront-porch = <1>;
+						vback-porch = <40>;
+						vfront-porch = <1>;
+						hsync-len = <45>;
+						vsync-len = <1>;
+					};
+				};
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioC 8 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						boot@0 {
+							label = "bootstrap/uboot/kernel";
+							reg = <0x0 0x400000>;
+						};
+
+						rootfs@400000 {
+							label = "rootfs";
+							reg = <0x400000 0x3C00000>;
+						};
+
+						data@4000000 {
+							label = "data";
+							reg = <0x4000000 0xC000000>;
+						};
+					};
+				};
+			};
+		};
+
+		usb0: ohci@700000 {
+			status = "okay";
+			num-ports = <2>;
+			atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW
+					   &pioD 3 GPIO_ACTIVE_LOW>;
+		};
+
+		usb1: ehci@800000 {
+			status = "okay";
+		};
+	};
+
+	led-controller-1 {
+		compatible = "gpio-leds";
+
+		led-1 {
+			label = "d8";
+			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	led-controller-2 {
+		compatible = "pwm-leds";
+
+		led-2 {
+			label = "d6";
+			pwms = <&pwm0 3 5000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "nand-disk";
+		};
+
+		led-3 {
+			label = "d7";
+			pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-left-click {
+			label = "left_click";
+			gpios = <&pioB 6 GPIO_ACTIVE_LOW>;
+			linux,code = <272>;
+			wakeup-source;
+		};
+
+		button-right-click {
+			label = "right_click";
+			gpios = <&pioB 7 GPIO_ACTIVE_LOW>;
+			linux,code = <273>;
+			wakeup-source;
+		};
+
+		button-left {
+			label = "Joystick Left";
+			gpios = <&pioB 14 GPIO_ACTIVE_LOW>;
+			linux,code = <105>;
+		};
+
+		button-right {
+			label = "Joystick Right";
+			gpios = <&pioB 15 GPIO_ACTIVE_LOW>;
+			linux,code = <106>;
+		};
+
+		button-up {
+			label = "Joystick Up";
+			gpios = <&pioB 16 GPIO_ACTIVE_LOW>;
+			linux,code = <103>;
+		};
+
+		button-down {
+			label = "Joystick Down";
+			gpios = <&pioB 17 GPIO_ACTIVE_LOW>;
+			linux,code = <108>;
+		};
+
+		button-enter {
+			label = "Joystick Press";
+			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
+			linux,code = <28>;
+		};
+	};
+};