ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 751 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi b/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi
new file mode 100644
index 000000000000..3f7dc787938e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi
@@ -0,0 +1,751 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+
+#include "vf610-pinfunc.h"
+#include <dt-bindings/clock/vf610-clock.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		can0 = &can0;
+		can1 = &can1;
+		ethernet0 = &fec0;
+		ethernet1 = &fec1;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		usbphy0 = &usbphy0;
+		usbphy1 = &usbphy1;
+	};
+
+	fxosc: fxosc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	sxosc: sxosc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	reboot: syscon-reboot {
+		compatible = "syscon-reboot";
+		regmap = <&src>;
+		offset = <0x0>;
+		mask = <0x1000>;
+	};
+
+	tempsensor: iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 16>, <&adc1 16>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&mscm_ir>;
+		ranges;
+
+		aips0: bus@40000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40000000 0x00070000>;
+			ranges;
+
+			mscm_cpucfg: cpucfg@40001000 {
+				compatible = "fsl,vf610-mscm-cpucfg", "syscon";
+				reg = <0x40001000 0x800>;
+			};
+
+			mscm_ir: interrupt-controller@40001800 {
+				compatible = "fsl,vf610-mscm-ir";
+				reg = <0x40001800 0x400>;
+				fsl,cpucfg = <&mscm_cpucfg>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			edma0: dma-controller@40018000 {
+				#dma-cells = <2>;
+				compatible = "fsl,vf610-edma";
+				reg = <0x40018000 0x2000>,
+					<0x40024000 0x1000>,
+					<0x40025000 0x1000>;
+				dma-channels = <32>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>,
+						<9 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma-tx", "edma-err";
+				clock-names = "dmamux0", "dmamux1";
+				clocks = <&clks VF610_CLK_DMAMUX0>,
+					<&clks VF610_CLK_DMAMUX1>;
+				status = "disabled";
+			};
+
+			can0: can@40020000 {
+				compatible = "fsl,vf610-flexcan";
+				reg = <0x40020000 0x4000>;
+				interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_FLEXCAN0>,
+					 <&clks VF610_CLK_FLEXCAN0>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart0: serial@40027000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x40027000 0x1000>;
+				interrupts = <61 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_UART0>;
+				clock-names = "ipg";
+				dmas = <&edma0 0 2>,
+					<&edma0 0 3>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+
+			uart1: serial@40028000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x40028000 0x1000>;
+				interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_UART1>;
+				clock-names = "ipg";
+				dmas = <&edma0 0 4>,
+					<&edma0 0 5>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+
+			uart2: serial@40029000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x40029000 0x1000>;
+				interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_UART2>;
+				clock-names = "ipg";
+				dmas = <&edma0 0 6>,
+					<&edma0 0 7>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+
+			uart3: serial@4002a000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x4002a000 0x1000>;
+				interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_UART3>;
+				clock-names = "ipg";
+				dmas = <&edma0 0 8>,
+					<&edma0 0 9>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+
+			dspi0: spi@4002c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-dspi";
+				reg = <0x4002c000 0x1000>;
+				interrupts = <67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_DSPI0>;
+				clock-names = "dspi";
+				spi-num-chipselects = <6>;
+				dmas = <&edma1 1 12>,
+					<&edma1 1 13>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			dspi1: spi@4002d000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-dspi";
+				reg = <0x4002d000 0x1000>;
+				interrupts = <68 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_DSPI1>;
+				clock-names = "dspi";
+				spi-num-chipselects = <4>;
+				dmas = <&edma1 1 14>,
+					<&edma1 1 15>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai0: sai@4002f000 {
+				compatible = "fsl,vf610-sai";
+				reg = <0x4002f000 0x1000>;
+				interrupts = <84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_SAI0>,
+					<&clks VF610_CLK_SAI0_DIV>,
+					<&clks 0>, <&clks 0>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "rx", "tx";
+				dmas = <&edma0 0 16>, <&edma0 0 17>;
+				status = "disabled";
+			};
+
+			sai1: sai@40030000 {
+				compatible = "fsl,vf610-sai";
+				reg = <0x40030000 0x1000>;
+				interrupts = <85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_SAI1>,
+					<&clks VF610_CLK_SAI1_DIV>,
+					<&clks 0>, <&clks 0>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "rx", "tx";
+				dmas = <&edma0 0 18>, <&edma0 0 19>;
+				status = "disabled";
+			};
+
+			sai2: sai@40031000 {
+				compatible = "fsl,vf610-sai";
+				reg = <0x40031000 0x1000>;
+				interrupts = <86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_SAI2>,
+					<&clks VF610_CLK_SAI2_DIV>,
+					<&clks 0>, <&clks 0>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "rx", "tx";
+				dmas = <&edma0 0 20>, <&edma0 0 21>;
+				status = "disabled";
+			};
+
+			sai3: sai@40032000 {
+				compatible = "fsl,vf610-sai";
+				reg = <0x40032000 0x1000>;
+				interrupts = <87 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_SAI3>,
+					<&clks VF610_CLK_SAI3_DIV>,
+					<&clks 0>, <&clks 0>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "rx", "tx";
+				dmas = <&edma0 1 8>, <&edma0 1 9>;
+				status = "disabled";
+			};
+
+			pit: pit@40037000 {
+				compatible = "fsl,vf610-pit";
+				reg = <0x40037000 0x1000>;
+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_PIT>;
+				clock-names = "pit";
+			};
+
+			pwm0: pwm@40038000 {
+				compatible = "fsl,vf610-ftm-pwm";
+				#pwm-cells = <3>;
+				reg = <0x40038000 0x1000>;
+				clock-names = "ftm_sys", "ftm_ext",
+					      "ftm_fix", "ftm_cnt_clk_en";
+				clocks = <&clks VF610_CLK_FTM0>,
+					<&clks VF610_CLK_FTM0_EXT_SEL>,
+					<&clks VF610_CLK_FTM0_FIX_SEL>,
+					<&clks VF610_CLK_FTM0_EXT_FIX_EN>;
+				status = "disabled";
+			};
+
+			pwm1: pwm@40039000 {
+				compatible = "fsl,vf610-ftm-pwm";
+				#pwm-cells = <3>;
+				reg = <0x40039000 0x1000>;
+				clock-names = "ftm_sys", "ftm_ext",
+					      "ftm_fix", "ftm_cnt_clk_en";
+				clocks = <&clks VF610_CLK_FTM1>,
+					<&clks VF610_CLK_FTM1_EXT_SEL>,
+					<&clks VF610_CLK_FTM1_FIX_SEL>,
+					<&clks VF610_CLK_FTM1_EXT_FIX_EN>;
+				status = "disabled";
+			};
+
+			adc0: adc@4003b000 {
+				compatible = "fsl,vf610-adc";
+				reg = <0x4003b000 0x1000>;
+				interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_ADC0>;
+				clock-names = "adc";
+				#io-channel-cells = <1>;
+				status = "disabled";
+				fsl,adck-max-frequency = <30000000>, <40000000>,
+							<20000000>;
+			};
+
+			tcon0: timing-controller@4003d000 {
+				compatible = "fsl,vf610-tcon";
+				reg = <0x4003d000 0x1000>;
+				clocks = <&clks VF610_CLK_TCON0>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			wdoga5: watchdog@4003e000 {
+				compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
+				reg = <0x4003e000 0x1000>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_WDT>;
+				status = "disabled";
+			};
+
+			qspi0: spi@40044000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-qspi";
+				reg = <0x40044000 0x1000>, <0x20000000 0x10000000>;
+				reg-names = "QuadSPI", "QuadSPI-memory";
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_QSPI0_EN>,
+					<&clks VF610_CLK_QSPI0>;
+				clock-names = "qspi_en", "qspi";
+				status = "disabled";
+			};
+
+			iomuxc: iomuxc@40048000 {
+				compatible = "fsl,vf610-iomuxc";
+				reg = <0x40048000 0x1000>;
+			};
+
+			gpio0: gpio@40049000 {
+				compatible = "fsl,vf610-gpio";
+				reg = <0x40049000 0x1000 0x400ff000 0x40>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 0 32>;
+			};
+
+			gpio1: gpio@4004a000 {
+				compatible = "fsl,vf610-gpio";
+				reg = <0x4004a000 0x1000 0x400ff040 0x40>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <108 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 32 32>;
+			};
+
+			gpio2: gpio@4004b000 {
+				compatible = "fsl,vf610-gpio";
+				reg = <0x4004b000 0x1000 0x400ff080 0x40>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <109 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 64 32>;
+			};
+
+			gpio3: gpio@4004c000 {
+				compatible = "fsl,vf610-gpio";
+				reg = <0x4004c000 0x1000 0x400ff0c0 0x40>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <110 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 96 32>;
+			};
+
+			gpio4: gpio@4004d000 {
+				compatible = "fsl,vf610-gpio";
+				reg = <0x4004d000 0x1000 0x400ff100 0x40>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <111 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 128 7>;
+			};
+
+			anatop: anatop@40050000 {
+				compatible = "fsl,vf610-anatop", "syscon";
+				reg = <0x40050000 0x400>;
+			};
+
+			usbphy0: usbphy@40050800 {
+				compatible = "fsl,vf610-usbphy";
+				reg = <0x40050800 0x400>;
+				interrupts = <50 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_USBPHY0>;
+				fsl,anatop = <&anatop>;
+				status = "disabled";
+			};
+
+			usbphy1: usbphy@40050c00 {
+				compatible = "fsl,vf610-usbphy";
+				reg = <0x40050c00 0x400>;
+				interrupts = <51 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_USBPHY1>;
+				fsl,anatop = <&anatop>;
+				status = "disabled";
+			};
+
+			dcu0: dcu@40058000 {
+				compatible = "fsl,vf610-dcu";
+				reg = <0x40058000 0x1200>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_DCU0>,
+					<&clks VF610_CLK_DCU0_DIV>;
+				clock-names = "dcu", "pix";
+				fsl,tcon = <&tcon0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@40066000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-i2c";
+				reg = <0x40066000 0x1000>;
+				interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_I2C0>;
+				clock-names = "ipg";
+				dmas = <&edma0 0 50>,
+					<&edma0 0 51>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+
+			i2c1: i2c@40067000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-i2c";
+				reg = <0x40067000 0x1000>;
+				interrupts = <72 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_I2C1>;
+				clock-names = "ipg";
+				dmas = <&edma0 0 52>,
+					<&edma0 0 53>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+
+			clks: ccm@4006b000 {
+				compatible = "fsl,vf610-ccm";
+				reg = <0x4006b000 0x1000>;
+				clocks = <&sxosc>, <&fxosc>;
+				clock-names = "sxosc", "fxosc";
+				#clock-cells = <1>;
+			};
+
+			usbdev0: usb@40034000 {
+				compatible = "fsl,vf610-usb", "fsl,imx27-usb";
+				reg = <0x40034000 0x800>;
+				interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_USBC0>;
+				fsl,usbphy = <&usbphy0>;
+				fsl,usbmisc = <&usbmisc0 0>;
+				dr_mode = "peripheral";
+				status = "disabled";
+			};
+
+			usbmisc0: usb@40034800 {
+				#index-cells = <1>;
+				compatible = "fsl,vf610-usbmisc";
+				reg = <0x40034800 0x200>;
+				clocks = <&clks VF610_CLK_USBC0>;
+				status = "disabled";
+			};
+
+			src: src@4006e000 {
+				compatible = "fsl,vf610-src", "syscon";
+				reg = <0x4006e000 0x1000>;
+				interrupts = <96 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		aips1: bus@40080000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40080000 0x0007f000>;
+			ranges;
+
+			edma1: dma-controller@40098000 {
+				#dma-cells = <2>;
+				compatible = "fsl,vf610-edma";
+				reg = <0x40098000 0x2000>,
+					<0x400a1000 0x1000>,
+					<0x400a2000 0x1000>;
+				dma-channels = <32>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
+						<11 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma-tx", "edma-err";
+				clock-names = "dmamux0", "dmamux1";
+				clocks = <&clks VF610_CLK_DMAMUX2>,
+					<&clks VF610_CLK_DMAMUX3>;
+				status = "disabled";
+			};
+
+			ocotp: ocotp@400a5000 {
+				compatible = "fsl,vf610-ocotp", "syscon";
+				reg = <0x400a5000 0x1000>;
+				clocks = <&clks VF610_CLK_OCOTP>;
+			};
+
+			snvs0: snvs@400a7000 {
+			    compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x400a7000 0x2000>;
+
+				snvsrtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs0>;
+					offset = <0x34>;
+					interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks VF610_CLK_SNVS>;
+					clock-names = "snvs-rtc";
+				};
+			};
+
+			uart4: serial@400a9000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x400a9000 0x1000>;
+				interrupts = <65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_UART4>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			uart5: serial@400aa000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x400aa000 0x1000>;
+				interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_UART5>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			dspi2: spi@400ac000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-dspi";
+				reg = <0x400ac000 0x1000>;
+				interrupts = <69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_DSPI2>;
+				clock-names = "dspi";
+				spi-num-chipselects = <2>;
+				dmas = <&edma1 0 10>,
+					<&edma1 0 11>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			dspi3: spi@400ad000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-dspi";
+				reg = <0x400ad000 0x1000>;
+				interrupts = <70 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_DSPI3>;
+				clock-names = "dspi";
+				spi-num-chipselects = <2>;
+				dmas = <&edma1 0 12>,
+					<&edma1 0 13>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			adc1: adc@400bb000 {
+				compatible = "fsl,vf610-adc";
+				reg = <0x400bb000 0x1000>;
+				interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_ADC1>;
+				clock-names = "adc";
+				#io-channel-cells = <1>;
+				status = "disabled";
+				fsl,adck-max-frequency = <30000000>, <40000000>,
+							<20000000>;
+			};
+
+			esdhc0: esdhc@400b1000 {
+				compatible = "fsl,imx53-esdhc";
+				reg = <0x400b1000 0x1000>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_IPG_BUS>,
+					<&clks VF610_CLK_PLATFORM_BUS>,
+					<&clks VF610_CLK_ESDHC0>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			esdhc1: esdhc@400b2000 {
+				compatible = "fsl,imx53-esdhc";
+				reg = <0x400b2000 0x1000>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_IPG_BUS>,
+					<&clks VF610_CLK_PLATFORM_BUS>,
+					<&clks VF610_CLK_ESDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			usbh1: usb@400b4000 {
+				compatible = "fsl,vf610-usb", "fsl,imx27-usb";
+				reg = <0x400b4000 0x800>;
+				interrupts = <76 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_USBC1>;
+				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc1 0>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbmisc1: usb@400b4800 {
+				#index-cells = <1>;
+				compatible = "fsl,vf610-usbmisc";
+				reg = <0x400b4800 0x200>;
+				clocks = <&clks VF610_CLK_USBC1>;
+				status = "disabled";
+			};
+
+			ftm: ftm@400b8000 {
+				compatible = "fsl,ftm-timer";
+				reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
+				interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "ftm-evt", "ftm-src",
+					"ftm-evt-counter-en", "ftm-src-counter-en";
+				clocks = <&clks VF610_CLK_FTM2>,
+					<&clks VF610_CLK_FTM3>,
+					<&clks VF610_CLK_FTM2_EXT_FIX_EN>,
+					<&clks VF610_CLK_FTM3_EXT_FIX_EN>;
+				status = "disabled";
+			};
+
+			qspi1: spi@400c4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-qspi";
+				reg = <0x400c4000 0x1000>, <0x50000000 0x10000000>;
+				reg-names = "QuadSPI", "QuadSPI-memory";
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_QSPI1_EN>,
+					<&clks VF610_CLK_QSPI1>;
+				clock-names = "qspi_en", "qspi";
+				status = "disabled";
+			};
+
+			dac0: dac@400cc000 {
+				compatible = "fsl,vf610-dac";
+				reg = <0x400cc000 1000>;
+				interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "dac";
+				clocks = <&clks VF610_CLK_DAC0>;
+				status = "disabled";
+			};
+
+			dac1: dac@400cd000 {
+				compatible = "fsl,vf610-dac";
+				reg = <0x400cd000 1000>;
+				interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "dac";
+				clocks = <&clks VF610_CLK_DAC1>;
+				status = "disabled";
+			};
+
+			fec0: ethernet@400d0000 {
+				compatible = "fsl,mvf600-fec";
+				reg = <0x400d0000 0x1000>;
+				interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_ENET0>,
+					<&clks VF610_CLK_ENET0>,
+					<&clks VF610_CLK_ENET>;
+				clock-names = "ipg", "ahb", "ptp";
+				status = "disabled";
+			};
+
+			fec1: ethernet@400d1000 {
+				compatible = "fsl,mvf600-fec";
+				reg = <0x400d1000 0x1000>;
+				interrupts = <79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_ENET1>,
+					<&clks VF610_CLK_ENET1>,
+					<&clks VF610_CLK_ENET>;
+				clock-names = "ipg", "ahb", "ptp";
+				status = "disabled";
+			};
+
+			can1: can@400d4000 {
+				compatible = "fsl,vf610-flexcan";
+				reg = <0x400d4000 0x4000>;
+				interrupts = <59 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_FLEXCAN1>,
+					 <&clks VF610_CLK_FLEXCAN1>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			nfc: nand@400e0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-nfc";
+				reg = <0x400e0000 0x4000>;
+				interrupts = <83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_NFC>;
+				clock-names = "nfc";
+				status = "disabled";
+			};
+
+			i2c2: i2c@400e6000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-i2c";
+				reg = <0x400e6000 0x1000>;
+				interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_I2C2>;
+				clock-names = "ipg";
+				dmas = <&edma0 1 36>,
+					<&edma0 1 37>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+
+			i2c3: i2c@400e7000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-i2c";
+				reg = <0x400e7000 0x1000>;
+				interrupts = <74 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_I2C3>;
+				clock-names = "ipg";
+				dmas = <&edma0 1 38>,
+					<&edma0 1 39>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+
+			crypto: crypto@400f0000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x400f0000 0x9000>;
+				ranges = <0 0x400f0000 0x9000>;
+				clocks = <&clks VF610_CLK_CAAM>;
+				clock-names = "ipg";
+
+				sec_jr0: jr0@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr1@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+		};
+	};
+};