ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 305 deletions

diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts
deleted file mode 100644
index bb6fab9fa47d..000000000000
--- a/arch/arm/boot/dts/omap3-ldp.dts
+++ /dev/null
@@ -1,305 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "omap34xx.dtsi"
-#include "omap-gpmc-smsc911x.dtsi"
-
-/ {
-	model = "TI OMAP3430 LDP (Zoom1 Labrador)";
-	compatible = "ti,omap3-ldp", "ti,omap3430", "ti,omap3";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x8000000>; /* 128 MB */
-	};
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_key_pins>;
-
-		key_enter {
-			label = "enter";
-			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* gpio101 */
-			linux,code = <KEY_ENTER>;
-			wakeup-source;
-		};
-
-		key_f1 {
-			label = "f1";
-			gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* gpio102 */
-			linux,code = <KEY_F1>;
-			wakeup-source;
-		};
-
-		key_f2 {
-			label = "f2";
-			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* gpio103 */
-			linux,code = <KEY_F2>;
-			wakeup-source;
-		};
-
-		key_f3 {
-			label = "f3";
-			gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* gpio104 */
-			linux,code = <KEY_F3>;
-			wakeup-source;
-		};
-
-		key_f4 {
-			label = "f4";
-			gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* gpio105 */
-			linux,code = <KEY_F4>;
-			wakeup-source;
-		};
-
-		key_left {
-			label = "left";
-			gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */
-			linux,code = <KEY_LEFT>;
-			wakeup-source;
-		};
-
-		key_right {
-			label = "right";
-			gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* gpio107 */
-			linux,code = <KEY_RIGHT>;
-			wakeup-source;
-		};
-
-		key_up {
-			label = "up";
-			gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* gpio108 */
-			linux,code = <KEY_UP>;
-			wakeup-source;
-		};
-
-		key_down {
-			label = "down";
-			gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* gpio109 */
-			linux,code = <KEY_DOWN>;
-			wakeup-source;
-		};
-	};
-};
-
-&gpmc {
-	ranges = <0 0 0x30000000 0x1000000>,	/* CS0 space, 16MB */
-		 <1 0 0x08000000 0x1000000>;	/* CS1 space, 16MB */
-
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		linux,mtd-name = "micron,nand";
-		nand-bus-width = <16>;
-		gpmc,device-width = <2>;
-		ti,nand-ecc-opt = "bch8";
-
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "X-Loader";
-			reg = <0 0x80000>;
-		};
-		partition@80000 {
-			label = "U-Boot";
-			reg = <0x80000 0x140000>;
-		};
-		partition@1c0000 {
-			label = "Environment";
-			reg = <0x1c0000 0x40000>;
-		};
-		partition@200000 {
-			label = "Kernel";
-			reg = <0x200000 0x1e00000>;
-		};
-		partition@2000000 {
-			label = "Filesystem";
-			reg = <0x2000000 0x6000000>;
-		};
-	};
-
-	ethernet@gpmc {
-		interrupt-parent = <&gpio5>;
-		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
-		reg = <1 0 0xff>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-
-		twl_power: power {
-			compatible = "ti,twl4030-power-idle";
-			ti,use_poweroff;
-		};
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-#include "omap3-panel-sharp-ls037v7dw01.dtsi"
-
-&backlight0 {
-	gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-};
-
-/* tps61130rsa enabled by twl4030 regen */
-&lcd_3v3 {
-	regulator-always-on;
-};
-
-&lcd0 {
-	enable-gpios = <&twl_gpio 15 GPIO_ACTIVE_HIGH>;	/* lcd INI */
-	reset-gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;	/* gpio55, lcd RESB */
-	mode-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;	/* gpio56, lcd MO */
-};
-
-&mcspi1 {
-	tsc2046@0 {
-		interrupt-parent = <&gpio2>;
-		interrupts = <22 0>;		/* gpio54 */
-		pendown-gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&mmc1 {
-	/* See 35xx errata 2.1.1.128 in SPRZ278F */
-	compatible = "ti,omap3-pre-es3-hsmmc";
-	vmmc-supply = <&vmmc1>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&omap3_pmx_core {
-	gpio_key_pins: gpio-key-pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4)	/* cam_d2.gpio_101 */
-			OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE4)	/* cam_d3.gpio_102 */
-			OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE4)	/* cam_d4.gpio_103 */
-			OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE4)	/* cam_d5.gpio_104 */
-			OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE4)	/* cam_d6.gpio_105 */
-			OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE4)	/* cam_d7.gpio_106 */
-			OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE4)	/* cam_d8.gpio_107 */
-			OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE4)	/* cam_d9.gpio_108 */
-			OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4)	/* cam_d10.gpio_109 */
-		>;
-	};
-
-	musb_pins: musb-pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)	/* hsusb0_clk.hsusb0_clk */
-			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)	/* hsusb0_data0.hsusb0_data0 */
-			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
-			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
-			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)	/* hsusb0_data3.hsusb0_data3 */
-			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)	/* hsusb0_data4.hsusb0_data4 */
-			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)	/* hsusb0_data5.hsusb0_data5 */
-			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)	/* hsusb0_data6.hsusb0_data6 */
-			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
-			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
-			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
-			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */
-		>;
-	};
-
-	mmc1_pins: mmc1-pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_clk.mmc1_clk */
-			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.mmc1_cmd */
-			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat0.mmc1_dat0 */
-			OMAP3_CORE1_IOPAD(0x214A, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat1.mmc1_dat1 */
-			OMAP3_CORE1_IOPAD(0x214C, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat2.mmc1_dat2 */
-			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat3.mmc1_dat3 */
-		>;
-	};
-};
-
-&twl_keypad {
-	linux,keymap = <MATRIX_KEY(0, 0, KEY_1)
-			MATRIX_KEY(0, 1, KEY_2)
-			MATRIX_KEY(0, 2, KEY_3)
-			MATRIX_KEY(1, 0, KEY_4)
-			MATRIX_KEY(1, 1, KEY_5)
-			MATRIX_KEY(1, 2, KEY_6)
-			MATRIX_KEY(1, 3, KEY_F5)
-			MATRIX_KEY(2, 0, KEY_7)
-			MATRIX_KEY(2, 1, KEY_8)
-			MATRIX_KEY(2, 2, KEY_9)
-			MATRIX_KEY(2, 3, KEY_F6)
-			MATRIX_KEY(3, 0, KEY_F7)
-			MATRIX_KEY(3, 1, KEY_0)
-			MATRIX_KEY(3, 2, KEY_F8)
-			MATRIX_KEY(5, 4, KEY_RESERVED)
-			MATRIX_KEY(4, 4, KEY_VOLUMEUP)
-			MATRIX_KEY(5, 5, KEY_VOLUMEDOWN)>;
-};
-
-&uart3 {
-	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
-};
-
-&usb_otg_hs {
-	pinctrl-names = "default";
-	pinctrl-0 = <&musb_pins>;
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	mode = <3>;
-	power = <50>;
-};
-
-&vaux1 {
-	/* Needed for ads7846 */
-	regulator-name = "vcc";
-};