ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 717 deletions

diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
deleted file mode 100644
index b2cb93edbc3a..000000000000
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ /dev/null
@@ -1,717 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "omap443x.dtsi"
-#include "elpida_ecb240abacn.dtsi"
-#include "omap4-mcpdm.dtsi"
-
-/ {
-	model = "TI OMAP4 SDP board";
-	compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	aliases {
-		display0 = &lcd0;
-		display1 = &lcd1;
-		display2 = &hdmi0;
-	};
-
-	vdd_eth: fixedregulator-vdd-eth {
-		pinctrl-names = "default";
-		pinctrl-0 = <&enet_enable_gpio>;
-
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_ETH";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>;  /* gpio line 48 */
-		enable-active-high;
-		regulator-boot-on;
-		startup-delay-us = <25000>;
-	};
-
-	vbat: fixedregulator-vbat {
-		compatible = "regulator-fixed";
-		regulator-name = "VBAT";
-		regulator-min-microvolt = <3750000>;
-		regulator-max-microvolt = <3750000>;
-		regulator-boot-on;
-	};
-
-	led-controller-1 {
-		compatible = "gpio-leds";
-
-		led-1 {
-			label = "omap4:green:debug0";
-			gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; /* 61 */
-		};
-
-		led-2 {
-			label = "omap4:green:debug1";
-			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; /* 30 */
-		};
-
-		led-3 {
-			label = "omap4:green:debug2";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; /* 7 */
-		};
-
-		led-4 {
-			label = "omap4:green:debug3";
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* 8 */
-		};
-
-		led-5 {
-			label = "omap4:green:debug4";
-			gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */
-		};
-
-		led-6 {
-			label = "omap4:blue:user";
-			gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */
-		};
-
-		led-7 {
-			label = "omap4:red:user";
-			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */
-		};
-
-		led-8 {
-			label = "omap4:green:user";
-			gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* 139 */
-		};
-	};
-
-	led-controller-2 {
-		compatible = "pwm-leds";
-
-		led-9 {
-			label = "omap4::keypad";
-			pwms = <&twl_pwm 0 7812500>;
-			max-brightness = <127>;
-		};
-
-		led-10 {
-			label = "omap4:green:chrg";
-			pwms = <&twl_pwmled 0 7812500>;
-			max-brightness = <255>;
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&twl_pwm 1 7812500>;
-		brightness-levels = <
-				0 10 20 30 40
-				50 60 70 80 90
-				100 110 120 127
-				>;
-		default-brightness-level = <13>;
-	};
-
-	sound {
-		compatible = "ti,abe-twl6040";
-		ti,model = "SDP4430";
-
-		ti,jack-detection = <1>;
-		ti,mclk-freq = <38400000>;
-
-		ti,mcpdm = <&mcpdm>;
-		ti,dmic = <&dmic>;
-
-		ti,twl6040 = <&twl6040>;
-
-		/* Audio routing */
-		ti,audio-routing =
-			"Headset Stereophone", "HSOL",
-			"Headset Stereophone", "HSOR",
-			"Earphone Spk", "EP",
-			"Ext Spk", "HFL",
-			"Ext Spk", "HFR",
-			"Line Out", "AUXL",
-			"Line Out", "AUXR",
-			"Vibrator", "VIBRAL",
-			"Vibrator", "VIBRAR",
-			"HSMIC", "Headset Mic",
-			"Headset Mic", "Headset Mic Bias",
-			"MAINMIC", "Main Handset Mic",
-			"Main Handset Mic", "Main Mic Bias",
-			"SUBMIC", "Sub Handset Mic",
-			"Sub Handset Mic", "Main Mic Bias",
-			"AFML", "Line In",
-			"AFMR", "Line In",
-			"DMic", "Digital Mic",
-			"Digital Mic", "Digital Mic1 Bias";
-	};
-
-	/* regulator for wl12xx on sdio5 */
-	wl12xx_vmmc: wl12xx_vmmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_gpio>;
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	tpd12s015: encoder {
-		compatible = "ti,tpd12s015";
-
-		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
-			<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
-			<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tpd12s015_in: endpoint {
-					remote-endpoint = <&hdmi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tpd12s015_out: endpoint {
-					remote-endpoint = <&hdmi_connector_in>;
-				};
-			};
-		};
-	};
-
-	hdmi0: connector {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-
-		type = "c";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&tpd12s015_out>;
-			};
-		};
-	};
-};
-
-&omap4_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&dss_hdmi_pins
-			&tpd12s015_pins
-	>;
-
-	uart2_pins: uart2-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
-			OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
-			OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_rx.uart2_rx */
-			OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
-		>;
-	};
-
-	uart3_pins: uart3-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
-			OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
-			OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
-			OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
-		>;
-	};
-
-	uart4_pins: uart4-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0)		/* uart4_rx.uart4_rx */
-			OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0)		/* uart4_tx.uart4_tx */
-		>;
-	};
-
-	twl6040_pins: twl6040-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3)		/* hdq_sio.gpio_127 */
-			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
-		>;
-	};
-
-	dmic_pins: dmic-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x110, PIN_OUTPUT | MUX_MODE0)		/* abe_dmic_clk1.abe_dmic_clk1 */
-			OMAP4_IOPAD(0x112, PIN_INPUT | MUX_MODE0)		/* abe_dmic_din1.abe_dmic_din1 */
-			OMAP4_IOPAD(0x114, PIN_INPUT | MUX_MODE0)		/* abe_dmic_din2.abe_dmic_din2 */
-			OMAP4_IOPAD(0x116, PIN_INPUT | MUX_MODE0)		/* abe_dmic_din3.abe_dmic_din3 */
-		>;
-	};
-
-	mcbsp1_pins: mcbsp1-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
-			OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
-			OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
-			OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
-		>;
-	};
-
-	mcbsp2_pins: mcbsp2-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
-			OMAP4_IOPAD(0x0f8, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dr.abe_mcbsp2_dr */
-			OMAP4_IOPAD(0x0fa, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dx.abe_mcbsp2_dx */
-			OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
-		>;
-	};
-
-	mcspi1_pins: mcspi1-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0)		/*  mcspi1_clk.mcspi1_clk */
-			OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0)		/*  mcspi1_somi.mcspi1_somi */
-			OMAP4_IOPAD(0x136, PIN_INPUT | MUX_MODE0)		/*  mcspi1_simo.mcspi1_simo */
-			OMAP4_IOPAD(0x138, PIN_INPUT | MUX_MODE0)		/*  mcspi1_cs0.mcspi1_cs0 */
-		>;
-	};
-
-	dss_hdmi_pins: dss-hdmi-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
-			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
-			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
-		>;
-	};
-
-	tpd12s015_pins: tpd12s015-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
-			OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
-			OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
-		>;
-	};
-
-	i2c1_pins: i2c1-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
-			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
-		>;
-	};
-
-	i2c2_pins: i2c2-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
-			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
-		>;
-	};
-
-	i2c3_pins: i2c3-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
-			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
-		>;
-	};
-
-	i2c4_pins: i2c4-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
-			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
-		>;
-	};
-
-	/* wl12xx GPIO output for WLAN_EN */
-	wl12xx_gpio: wl12xx-gpio-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_nwp.gpio_54 */
-		>;
-	};
-
-	/* wl12xx GPIO inputs and SDIO pins */
-	wl12xx_pins: wl12xx-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
-			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
-			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
-			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
-			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
-			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
-			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
-		>;
-	};
-
-	/* gpio_48 for ENET_ENABLE */
-	enet_enable_gpio: enet-enable-gpio-pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* gpmc_a24.gpio_48 */
-		>;
-	};
-
-	ks8851_pins: ks8851-pins {
-		pinctrl-single,pins = <
-			/* ENET_INT */
-			OMAP4_IOPAD(0x054, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ad10.gpio_34 */
-			/*
-			 * Misterious pin which makes the ethernet working
-			 * The legacy board file requested this pin on boot
-			 * (ETH_KS8851_QUART) and set it to high, similarly to
-			 * the ENET_ENABLE pin.
-			 * We could use gpio-hog to keep it high, but let's use
-			 * it as a reset GPIO for ks8851.
-			 */
-			OMAP4_IOPAD(0x13a, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* mcspi1_cs1.gpio_138 */
-		>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	clock-frequency = <400000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
-	};
-
-	twl6040: twl@4b {
-		compatible = "ti,twl6040";
-		#clock-cells = <0>;
-		reg = <0x4b>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&twl6040_pins>;
-
-		/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
-		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
-		ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>;  /* gpio line 127 */
-
-		vio-supply = <&v1v8>;
-		v2v1-supply = <&v2v1>;
-		enable-active-high;
-
-		/* regulators for vibra motor */
-		vddvibl-supply = <&vbat>;
-		vddvibr-supply = <&vbat>;
-
-		vibra {
-			/* Vibra driver, motor resistance parameters */
-			ti,vibldrv-res = <8>;
-			ti,vibrdrv-res = <3>;
-			ti,viblmotor-res = <10>;
-			ti,vibrmotor-res = <10>;
-		};
-	};
-};
-
-#include "twl6030.dtsi"
-#include "twl6030_omap4.dtsi"
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-
-	clock-frequency = <400000>;
-
-	/*
-	 * Temperature Sensor
-	 * https://www.ti.com/lit/ds/symlink/tmp105.pdf
-	 */
-	tmp105@48 {
-		compatible = "ti,tmp105";
-		reg = <0x48>;
-	};
-
-	/*
-	 * Ambient Light Sensor
-	 * http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf
-	 */
-	bh1780@29 {
-		compatible = "rohm,bh1780";
-		reg = <0x29>;
-	};
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_pins>;
-
-	clock-frequency = <400000>;
-
-	/*
-	 * 3-Axis Digital Compass
-	 * https://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf
-	 */
-	hmc5843@1e {
-		compatible = "honeywell,hmc5843";
-		reg = <0x1e>;
-	};
-};
-
-&mcspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi1_pins>;
-
-	eth@0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&ks8851_pins>;
-
-		compatible = "ks8851";
-		spi-max-frequency = <24000000>;
-		reg = <0>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */
-		vdd-supply = <&vdd_eth>;
-		reset-gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc>;
-	bus-width = <8>;
-};
-
-&mmc2 {
-	vmmc-supply = <&vaux1>;
-	bus-width = <8>;
-	ti,non-removable;
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&mmc4 {
-	status = "disabled";
-};
-
-&mmc5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&wl12xx_pins>;
-	vmmc-supply = <&wl12xx_vmmc>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1281";
-		reg = <2>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
-		ref-clock-frequency = <26000000>;
-		tcxo-clock-frequency = <26000000>;
-	};
-};
-
-&emif1 {
-	cs1-used;
-	device-handle = <&elpida_ECB240ABACN>;
-};
-
-&emif2 {
-	cs1-used;
-	device-handle = <&elpida_ECB240ABACN>;
-};
-
-&keypad {
-	keypad,num-rows = <8>;
-	keypad,num-columns = <8>;
-	linux,keymap = <0x00000012	/* KEY_E */
-			0x00010013	/* KEY_R */
-			0x00020014	/* KEY_T */
-			0x00030066	/* KEY_HOME */
-			0x0004003f	/* KEY_F5 */
-			0x000500f0	/* KEY_UNKNOWN */
-			0x00060017	/* KEY_I */
-			0x0007002a	/* KEY_LEFTSHIFT */
-			0x01000020	/* KEY_D*/
-			0x01010021	/* KEY_F */
-			0x01020022	/* KEY_G */
-			0x010300e7	/* KEY_SEND */
-			0x01040040	/* KEY_F6 */
-			0x010500f0	/* KEY_UNKNOWN */
-			0x01060025	/* KEY_K */
-			0x0107001c	/* KEY_ENTER */
-			0x0200002d	/* KEY_X */
-			0x0201002e	/* KEY_C */
-			0x0202002f	/* KEY_V */
-			0x0203006b	/* KEY_END */
-			0x02040041	/* KEY_F7 */
-			0x020500f0	/* KEY_UNKNOWN */
-			0x02060034	/* KEY_DOT */
-			0x0207003a	/* KEY_CAPSLOCK */
-			0x0300002c	/* KEY_Z */
-			0x0301004e	/* KEY_KPLUS */
-			0x03020030	/* KEY_B */
-			0x0303003b	/* KEY_F1 */
-			0x03040042	/* KEY_F8 */
-			0x030500f0	/* KEY_UNKNOWN */
-			0x03060018	/* KEY_O */
-			0x03070039	/* KEY_SPACE */
-			0x04000011	/* KEY_W */
-			0x04010015	/* KEY_Y */
-			0x04020016	/* KEY_U */
-			0x0403003c	/* KEY_F2 */
-			0x04040073	/* KEY_VOLUMEUP */
-			0x040500f0	/* KEY_UNKNOWN */
-			0x04060026	/* KEY_L */
-			0x04070069	/* KEY_LEFT */
-			0x0500001f	/* KEY_S */
-			0x05010023	/* KEY_H */
-			0x05020024	/* KEY_J */
-			0x0503003d	/* KEY_F3 */
-			0x05040043	/* KEY_F9 */
-			0x05050072	/* KEY_VOLUMEDOWN */
-			0x05060032	/* KEY_M */
-			0x0507006a	/* KEY_RIGHT */
-			0x06000010	/* KEY_Q */
-			0x0601001e	/* KEY_A */
-			0x06020031	/* KEY_N */
-			0x0603009e	/* KEY_BACK */
-			0x0604000e	/* KEY_BACKSPACE */
-			0x060500f0	/* KEY_UNKNOWN */
-			0x06060019	/* KEY_P */
-			0x06070067	/* KEY_UP */
-			0x07000094	/* KEY_PROG1 */
-			0x07010095	/* KEY_PROG2 */
-			0x070200ca	/* KEY_PROG3 */
-			0x070300cb	/* KEY_PROG4 */
-			0x0704003e	/* KEY_F4 */
-			0x070500f0	/* KEY_UNKNOWN */
-			0x07060160	/* KEY_OK */
-			0x0707006c>;	/* KEY_DOWN */
-	linux,input-no-autorepeat;
-};
-
-&uart2 {
-	interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core OMAP4_UART2_RX>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-};
-
-&uart3 {
-	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core OMAP4_UART3_RX>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
-&uart4 {
-	interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core OMAP4_UART4_RX>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins>;
-};
-
-&mcbsp1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp1_pins>;
-	status = "okay";
-};
-
-&mcbsp2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp2_pins>;
-	status = "okay";
-};
-
-&dmic {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dmic_pins>;
-	status = "okay";
-};
-
-&twl_usb_comparator {
-	usb-supply = <&vusb>;
-};
-
-&usb_otg_hs {
-	interface-type = <1>;
-	mode = <3>;
-	power = <50>;
-};
-
-&dss {
-	status = "okay";
-};
-
-&dsi1 {
-	status = "okay";
-	vdd-supply = <&vcxio>;
-
-	port {
-		dsi1_out_ep: endpoint {
-			remote-endpoint = <&lcd0_in>;
-			lanes = <0 1 2 3 4 5>;
-		};
-	};
-
-	lcd0: panel@0 {
-		compatible = "tpo,taal", "panel-dsi-cm";
-		reg = <0>;
-		label = "lcd0";
-
-		reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;	/* 102 */
-
-		port {
-			lcd0_in: endpoint {
-				remote-endpoint = <&dsi1_out_ep>;
-			};
-		};
-	};
-};
-
-&dsi2 {
-	status = "okay";
-	vdd-supply = <&vcxio>;
-
-	port {
-		dsi2_out_ep: endpoint {
-			remote-endpoint = <&lcd1_in>;
-			lanes = <0 1 2 3 4 5>;
-		};
-	};
-
-	lcd1: panel@0 {
-		compatible = "tpo,taal", "panel-dsi-cm";
-		reg = <0>;
-		label = "lcd1";
-
-		reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;	/* 104 */
-
-		port {
-			lcd1_in: endpoint {
-				remote-endpoint = <&dsi2_out_ep>;
-			};
-		};
-	};
-};
-
-&hdmi {
-	status = "okay";
-	vdda-supply = <&vdac>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&tpd12s015_in>;
-		};
-	};
-};