Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM DT updates from Arnd Bergmann:
 "These are all the updates to device tree files for 32-bit platforms,
  plus a couple of related 64-bit updates:

  New SoC support:
   - Allwinner A83T
   - Axis Artpec-6 SoC
   - Mediatek MT7623 SoC
   - TI Keystone K2G SoC
   - ST Microelectronics stm32f469

  New board or machine support:
   - ARM Juno R2
   - Buffalo Linkstation LS-QVL and LS-GL
   - Cubietruck plus
   - D-Link DIR-885L
   - DT support for ARM RealView PB1176 and PB11MPCore
   - Google Nexus 7
   - Homlet v2
   - Itead Ibox
   - Lamobo R1
   - LG Optimus Black
   - Logicpd dm3730
   - Raspberry Pi Model A

  Other changes include
   - Lots of updates for Qualcomm APQ8064, MSM8974 and others
   - Improved support for Nokia N900 and other OMAP machines
   - Common clk support for lpc32xx
   - HDLCD display on ARM
   - Improved stm32f429 support
   - Improved Renesas device support, r8a779x and others
   - Lots of Rockchip updates
   - Samsung cleanups
   - ADC support for Atmel SAMA5D2
   - BCM2835 (Raspberry Pi) improvements
   - Broadcom Northstar Plus enhancements
   - OMAP GPMC rework
   - Several improvements for Atmel SAMA5D2 / Xplained
   - Global change to remove inofficial "arm,amba-bus" compatible
     string"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (350 commits)
  ARM, ARM64: dts: drop "arm,amba-bus" in favor of "simple-bus"
  ARM: dts: artpec: dual-license on artpec6.dtsi
  ARM: dts: ux500: add synaptics RMI4 for Ux500 TVK DT
  arm64: dts: juno/vexpress: fix node name unit-address presence warnings
  arm64: dts: foundation-v8: add SBSA Generic Watchdog device node
  ARM: dts: at91: sama5d2 Xplained: add leds node
  ARM: dts: at91: sama5d2 Xplained: add user push button
  ARM: dts: at91: sama5d2 Xplained: set pin muxing for usb gadget and usb host
  ARM: dts: stm32f429: Enable Ethernet on Eval board
  ARM: dts: omap3-sniper: TWL4030 keypad support
  Revert "ARM: dts: DRA7: Add dt nodes for PWMSS"
  ARM: dts: dm814x: dra62x: Disable wait pin monitoring for NAND
  ARM: dts: dm814x: dra62x: Fix NAND device nodes
  ARM: dts: stm32f429: Add Ethernet support
  ARM: dts: stm32f429: Add system config bank node
  ARM: dts: at91: sama5d2: add nand0 and nfc0 nodes
  ARM: dts: at91: sama5d2: add dma properties to UART nodes
  ARM: dts: at91: sama5d2 Xplained: Correct the macb irq pinctrl node
  ARM: dts: exynos: Don't overheat the Odroid XU3-Lite on high load
  ARM: dts: exynos: Add cooling levels for Exynos5422/5800 CPUs
  ...

1 files changed, 10 insertions, 10 deletions

diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index ca53a5947437..d95edb6f6265 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -12,15 +12,15 @@
 
 		rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000 0x100>,
-			      <0x6100 0x100>;
+			reg = <0x6000>,
+			      <0x6100>;
 			reg-names = "rtc", "alarm";
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		pwrkey@800 {
 			compatible = "qcom,pm8941-pwrkey";
-			reg = <0x800 0x100>;
+			reg = <0x800>;
 			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
 			debounce = <15625>;
 			bias-pull-up;
@@ -28,7 +28,7 @@
 
 		charger@1000 {
 			compatible = "qcom,pm8941-charger";
-			reg = <0x1000 0x700>;
+			reg = <0x1000>;
 			interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
 				     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
 				     <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
@@ -49,7 +49,7 @@
 
 		pm8941_gpios: gpios@c000 {
 			compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio";
-			reg = <0xc000 0x2400>;
+			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
@@ -92,7 +92,7 @@
 
 		pm8941_mpps: mpps@a000 {
 			compatible = "qcom,pm8941-mpp", "qcom,spmi-mpp";
-			reg = <0xa000 0x800>;
+			reg = <0xa000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
@@ -107,7 +107,7 @@
 
 		pm8941_temp: temp-alarm@2400 {
 			compatible = "qcom,spmi-temp-alarm";
-			reg = <0x2400 0x100>;
+			reg = <0x2400>;
 			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
 			io-channels = <&pm8941_vadc VADC_DIE_TEMP>;
 			io-channel-names = "thermal";
@@ -116,7 +116,7 @@
 
 		pm8941_vadc: vadc@3100 {
 			compatible = "qcom,spmi-vadc";
-			reg = <0x3100 0x100>;
+			reg = <0x3100>;
 			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -141,7 +141,7 @@
 
 		pm8941_iadc: iadc@3600 {
 			compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
-			reg = <0x3600 0x100>;
+			reg = <0x3600>;
 			interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
 			qcom,external-resistor-micro-ohms = <10000>;
 		};
@@ -161,7 +161,7 @@
 
 		pm8941_wled: wled@d800 {
 			compatible = "qcom,pm8941-wled";
-			reg = <0xd800 0x100>;
+			reg = <0xd800>;
 			label = "backlight";
 
 			status = "disabled";