ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 597 deletions

diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
deleted file mode 100644
index d838bf0d5d9a..000000000000
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ /dev/null
@@ -1,597 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Veyron (and derivatives) board device tree source
- *
- * Copyright 2015 Google, Inc
- */
-
-#include <dt-bindings/clock/rockchip,rk808.h>
-#include <dt-bindings/input/input.h>
-#include "rk3288.dtsi"
-
-/ {
-	aliases {
-		mmc0 = &emmc;
-	};
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-	};
-
-	/*
-	 * The default coreboot on veyron devices ignores memory@0 nodes
-	 * and would instead create another memory node.
-	 */
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x80000000>;
-	};
-
-
-	power_button: power-button {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwr_key_l>;
-
-		key-power {
-			label = "Power";
-			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			debounce-interval = <100>;
-			wakeup-source;
-		};
-	};
-
-	gpio-restart {
-		compatible = "gpio-restart";
-		gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ap_warm_reset_h>;
-		priority = <200>;
-	};
-
-	emmc_pwrseq: emmc-pwrseq {
-		compatible = "mmc-pwrseq-emmc";
-		pinctrl-0 = <&emmc_reset>;
-		pinctrl-names = "default";
-		reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
-	};
-
-	sdio_pwrseq: sdio-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		clocks = <&rk808 RK808_CLKOUT1>;
-		clock-names = "ext_clock";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_enable_h>;
-
-		/*
-		 * Depending on the actual card populated GPIO4 D4
-		 * correspond to one of these signals on the module:
-		 *
-		 * D4:
-		 * - SDIO_RESET_L_WL_REG_ON
-		 * - PDN (power down when low)
-		 */
-		reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
-	};
-
-	vcc_5v: vcc-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_5v";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	vcc33_sys: vcc33-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc33_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	vcc50_hdmi: vcc50-hdmi {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc50_hdmi";
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc_5v>;
-	};
-
-	vdd_logic: vdd-logic {
-		compatible = "pwm-regulator";
-		regulator-name = "vdd_logic";
-
-		pwms = <&pwm1 0 1994 0>;
-		pwm-supply = <&vcc33_sys>;
-
-		pwm-dutycycle-range = <0x7b 0>;
-		pwm-dutycycle-unit = <0x94>;
-
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <950000>;
-		regulator-max-microvolt = <1350000>;
-		regulator-ramp-delay = <4000>;
-	};
-};
-
-&cpu0 {
-	cpu0-supply = <&vdd_cpu>;
-};
-
-&cpu_crit {
-	temperature = <100000>;
-};
-
-/* rk3288-c used in Veyron Chrome-devices has slightly changed OPPs */
-&cpu_opp_table {
-	/delete-node/ opp-312000000;
-
-	opp-1512000000 {
-		opp-microvolt = <1250000>;
-	};
-	opp-1608000000 {
-		opp-microvolt = <1300000>;
-	};
-	opp-1704000000 {
-		opp-hz = /bits/ 64 <1704000000>;
-		opp-microvolt = <1350000>;
-	};
-	opp-1800000000 {
-		opp-hz = /bits/ 64 <1800000000>;
-		opp-microvolt = <1400000>;
-	};
-};
-
-&emmc {
-	status = "okay";
-
-	bus-width = <8>;
-	cap-mmc-highspeed;
-	rockchip,default-sample-phase = <158>;
-	disable-wp;
-	mmc-hs200-1_8v;
-	mmc-pwrseq = <&emmc_pwrseq>;
-	non-removable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
-};
-
-&gpu {
-	mali-supply = <&vdd_gpu>;
-	status = "okay";
-};
-
-&gpu_alert0 {
-	temperature = <72500>;
-};
-
-&gpu_crit {
-	temperature = <100000>;
-};
-
-&hdmi {
-	pinctrl-names = "default", "unwedge";
-	pinctrl-0 = <&hdmi_ddc>;
-	pinctrl-1 = <&hdmi_ddc_unwedge>;
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	clock-frequency = <400000>;
-	i2c-scl-falling-time-ns = <50>;		/* 2.5ns measured */
-	i2c-scl-rising-time-ns = <100>;		/* 45ns measured */
-
-	rk808: pmic@1b {
-		compatible = "rockchip,rk808";
-		reg = <0x1b>;
-		clock-output-names = "xin32k", "wifibt_32kin";
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int_l>;
-		rockchip,system-power-controller;
-		wakeup-source;
-		#clock-cells = <1>;
-
-		vcc1-supply = <&vcc33_sys>;
-		vcc2-supply = <&vcc33_sys>;
-		vcc3-supply = <&vcc33_sys>;
-		vcc4-supply = <&vcc33_sys>;
-		vcc6-supply = <&vcc_5v>;
-		vcc7-supply = <&vcc33_sys>;
-		vcc8-supply = <&vcc33_sys>;
-		vcc12-supply = <&vcc_18>;
-		vddio-supply = <&vcc33_io>;
-
-		regulators {
-			vdd_cpu: DCDC_REG1 {
-				regulator-name = "vdd_arm";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1450000>;
-				regulator-ramp-delay = <6001>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_gpu: DCDC_REG2 {
-				regulator-name = "vdd_gpu";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1250000>;
-				regulator-ramp-delay = <6001>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc135_ddr: DCDC_REG3 {
-				regulator-name = "vcc135_ddr";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			/*
-			 * vcc_18 has several aliases.  (vcc18_flashio and
-			 * vcc18_wl).  We'll add those aliases here just to
-			 * make it easier to follow the schematic.  The signals
-			 * are actually hooked together and only separated for
-			 * power measurement purposes).
-			 */
-			vcc18_wl: vcc18_flashio: vcc_18: DCDC_REG4 {
-				regulator-name = "vcc_18";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			/*
-			 * Note that both vcc33_io and vcc33_pmuio are always
-			 * powered together. To simplify the logic in the dts
-			 * we just refer to vcc33_io every time something is
-			 * powered from vcc33_pmuio. In fact, on later boards
-			 * (such as danger) they're the same net.
-			 */
-			vcc33_io: LDO_REG1 {
-				regulator-name = "vcc33_io";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vdd_10: LDO_REG3 {
-				regulator-name = "vdd_10";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1000000>;
-				};
-			};
-
-			vdd10_lcd_pwren_h: LDO_REG7 {
-				regulator-name = "vdd10_lcd_pwren_h";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc33_lcd: SWITCH_REG1 {
-				regulator-name = "vcc33_lcd";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-		};
-	};
-};
-
-&i2c1 {
-	status = "okay";
-
-	clock-frequency = <400000>;
-	i2c-scl-falling-time-ns = <50>;		/* 2.5ns measured */
-	i2c-scl-rising-time-ns = <100>;		/* 40ns measured */
-
-	tpm: tpm@20 {
-		compatible = "infineon,slb9645tt";
-		reg = <0x20>;
-		powered-while-suspended;
-	};
-};
-
-&i2c2 {
-	status = "okay";
-
-	/* 100kHz since 4.7k resistors don't rise fast enough */
-	clock-frequency = <100000>;
-	i2c-scl-falling-time-ns = <50>;		/* 10ns measured */
-	i2c-scl-rising-time-ns = <800>;		/* 600ns measured */
-};
-
-&i2c4 {
-	status = "okay";
-
-	clock-frequency = <400000>;
-	i2c-scl-falling-time-ns = <50>;		/* 11ns measured */
-	i2c-scl-rising-time-ns = <300>;		/* 225ns measured */
-};
-
-&io_domains {
-	status = "okay";
-
-	bb-supply = <&vcc33_io>;
-	dvp-supply = <&vcc_18>;
-	flash0-supply = <&vcc18_flashio>;
-	gpio1830-supply = <&vcc33_io>;
-	gpio30-supply = <&vcc33_io>;
-	lcdc-supply = <&vcc33_lcd>;
-	wifi-supply = <&vcc18_wl>;
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&sdio0 {
-	status = "okay";
-
-	bus-width = <4>;
-	cap-sd-highspeed;
-	cap-sdio-irq;
-	keep-power-in-suspend;
-	mmc-pwrseq = <&sdio_pwrseq>;
-	non-removable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>;
-	sd-uhs-sdr12;
-	sd-uhs-sdr25;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
-	vmmc-supply = <&vcc33_sys>;
-	vqmmc-supply = <&vcc18_wl>;
-};
-
-&spi2 {
-	status = "okay";
-
-	rx-sample-delay-ns = <12>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <50000000>;
-		reg = <0>;
-	};
-};
-
-&tsadc {
-	status = "okay";
-
-	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
-	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
-	rockchip,hw-tshut-temp = <125000>;
-};
-
-&uart0 {
-	status = "okay";
-
-	/* Pins don't include flow control by default; add that in */
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&usbphy {
-	status = "okay";
-};
-
-&usb_host0_ehci {
-	status = "okay";
-
-	needs-reset-on-resume;
-};
-
-&usb_host1 {
-	status = "okay";
-	snps,need-phy-for-wake;
-};
-
-&usb_otg {
-	status = "okay";
-
-	assigned-clocks = <&cru SCLK_USBPHY480M_SRC>;
-	assigned-clock-parents = <&usbphy0>;
-	dr_mode = "host";
-	snps,need-phy-for-wake;
-};
-
-&vopb {
-	status = "okay";
-};
-
-&vopb_mmu {
-	status = "okay";
-};
-
-&wdt {
-	status = "okay";
-};
-
-&pinctrl {
-	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
-		bias-disable;
-		drive-strength = <8>;
-	};
-
-	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
-		bias-pull-up;
-		drive-strength = <8>;
-	};
-
-	pcfg_output_high: pcfg-output-high {
-		output-high;
-	};
-
-	pcfg_output_low: pcfg-output-low {
-		output-low;
-	};
-
-	buttons {
-		pwr_key_l: pwr-key-l {
-			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	emmc {
-		emmc_reset: emmc-reset {
-			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		/*
-		 * We run eMMC at max speed; bump up drive strength.
-		 * We also have external pulls, so disable the internal ones.
-		 */
-		emmc_clk: emmc-clk {
-			rockchip,pins = <3 RK_PC2 2 &pcfg_pull_none_drv_8ma>;
-		};
-
-		emmc_cmd: emmc-cmd {
-			rockchip,pins = <3 RK_PC0 2 &pcfg_pull_none_drv_8ma>;
-		};
-
-		emmc_bus8: emmc-bus8 {
-			rockchip,pins = <3 RK_PA0 2 &pcfg_pull_none_drv_8ma>,
-					<3 RK_PA1 2 &pcfg_pull_none_drv_8ma>,
-					<3 RK_PA2 2 &pcfg_pull_none_drv_8ma>,
-					<3 RK_PA3 2 &pcfg_pull_none_drv_8ma>,
-					<3 RK_PA4 2 &pcfg_pull_none_drv_8ma>,
-					<3 RK_PA5 2 &pcfg_pull_none_drv_8ma>,
-					<3 RK_PA6 2 &pcfg_pull_none_drv_8ma>,
-					<3 RK_PA7 2 &pcfg_pull_none_drv_8ma>;
-		};
-	};
-
-	pmic {
-		pmic_int_l: pmic-int-l {
-			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	reboot {
-		ap_warm_reset_h: ap-warm-reset-h {
-			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	recovery-switch {
-		rec_mode_l: rec-mode-l {
-			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	sdio0 {
-		wifi_enable_h: wifienable-h {
-			rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		/* NOTE: mislabelled on schematic; should be bt_enable_h */
-		bt_enable_l: bt-enable-l {
-			rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		bt_host_wake: bt-host-wake {
-			rockchip,pins = <4 RK_PD7 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-
-		bt_host_wake_l: bt-host-wake-l {
-			rockchip,pins = <4 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		/*
-		 * We run sdio0 at max speed; bump up drive strength.
-		 * We also have external pulls, so disable the internal ones.
-		 */
-		sdio0_bus4: sdio0-bus4 {
-			rockchip,pins = <4 RK_PC4 1 &pcfg_pull_none_drv_8ma>,
-					<4 RK_PC5 1 &pcfg_pull_none_drv_8ma>,
-					<4 RK_PC6 1 &pcfg_pull_none_drv_8ma>,
-					<4 RK_PC7 1 &pcfg_pull_none_drv_8ma>;
-		};
-
-		sdio0_cmd: sdio0-cmd {
-			rockchip,pins = <4 RK_PD0 1 &pcfg_pull_none_drv_8ma>;
-		};
-
-		sdio0_clk: sdio0-clk {
-			rockchip,pins = <4 RK_PD1 1 &pcfg_pull_none_drv_8ma>;
-		};
-
-		/*
-		 * These pins are only present on very new veyron boards; on
-		 * older boards bt_dev_wake is simply always high.  Note that
-		 * gpio4_D2 is a NC on old veyron boards, so it doesn't hurt
-		 * to map this pin everywhere
-		 */
-		bt_dev_wake_sleep: bt-dev-wake-sleep {
-			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_output_low>;
-		};
-
-		bt_dev_wake_awake: bt-dev-wake-awake {
-			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_output_high>;
-		};
-
-		bt_dev_wake: bt-dev-wake {
-			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	tpm {
-		tpm_int_h: tpm-int-h {
-			rockchip,pins = <7 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	write-protect {
-		fw_wp_ap: fw-wp-ap {
-			rockchip,pins = <7 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};