diff options
author | Rob Herring <robh@kernel.org> | 2023-05-04 18:38:52 -0500 |
---|---|---|
committer | Rob Herring <robh@kernel.org> | 2023-06-21 11:39:50 -0600 |
commit | 724ba6751532055db75992fc6ae21c3e322e94a7 (patch) | |
tree | c54cea784e2f7725fe18f8a5a234779b966d414a /arch/arm/boot/dts/ste-href-stuib.dtsi | |
parent | 6a1d798feb65d2a67e6e2cafb0b0e4f430603226 (diff) |
ARM: dts: Move .dts files to vendor sub-directories
The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.
There's no change to dtbs_install as the flat structure is maintained on
install.
The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
company (e.g. gemini, nspire)
The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Diffstat (limited to 'arch/arm/boot/dts/ste-href-stuib.dtsi')
-rw-r--r-- | arch/arm/boot/dts/ste-href-stuib.dtsi | 211 |
1 files changed, 0 insertions, 211 deletions
diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi deleted file mode 100644 index 79c2be36acae..000000000000 --- a/arch/arm/boot/dts/ste-href-stuib.dtsi +++ /dev/null @@ -1,211 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright 2012 ST-Ericsson AB - */ - -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - vdd-supply = <&ab8500_ldo_aux1_reg>; - pinctrl-names = "default"; - pinctrl-0 = <&prox_stuib_mode>, <&hall_stuib_mode>; - - button@139 { - /* Proximity sensor */ - gpios = <&gpio6 25 GPIO_ACTIVE_HIGH>; - linux,code = <11>; /* SW_FRONT_PROXIMITY */ - label = "SFH7741 Proximity Sensor"; - }; - button@145 { - /* Hall sensor */ - gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>; - linux,code = <0>; /* SW_LID */ - label = "HED54XXU11 Hall Effect Sensor"; - }; - }; - - soc { - i2c@80004000 { - stmpe1601: port-expander@40 { - compatible = "st,stmpe1601"; - reg = <0x40>; - interrupts = <26 IRQ_TYPE_EDGE_FALLING>; - interrupt-parent = <&gpio6>; - vcc-supply = <&db8500_vsmps2_reg>; - vio-supply = <&db8500_vsmps2_reg>; - pinctrl-names = "default"; - pinctrl-0 = <&stmpe_stuib_mode>; - - wakeup-source; - st,autosleep-timeout = <1024>; - - keyboard-controller { - compatible = "st,stmpe-keypad"; - - debounce-interval = <64>; - st,scan-count = <8>; - st,no-autorepeat; - - linux,keymap = <0x205006b - 0x4010074 - 0x3050072 - 0x1030004 - 0x502006a - 0x500000a - 0x5008b - 0x706001c - 0x405000b - 0x6070003 - 0x3040067 - 0x303006c - 0x60400e7 - 0x602009e - 0x4020073 - 0x5050002 - 0x4030069 - 0x3020008>; - }; - }; - }; - - /* Sensors mounted on this board variant */ - i2c@80128000 { - lis331dl@1c { - /* Accelerometer */ - compatible = "st,lis331dl-accel"; - st,drdy-int-pin = <1>; - reg = <0x1c>; - vdd-supply = <&ab8500_ldo_aux1_reg>; - vddio-supply = <&db8500_vsmps2_reg>; - pinctrl-names = "default"; - pinctrl-0 = <&accel_stuib_mode>; - interrupt-parent = <&gpio2>; - interrupts = <18 IRQ_TYPE_EDGE_RISING>, - <19 IRQ_TYPE_EDGE_RISING>; - }; - ak8974@f { - /* Magnetometer */ - compatible = "asahi-kasei,ak8974"; - reg = <0x0f>; - vdd-supply = <&ab8500_ldo_aux1_reg>; - vddio-supply = <&db8500_vsmps2_reg>; - pinctrl-names = "default"; - pinctrl-0 = <&magneto_stuib_mode>; - interrupt-parent = <&gpio1>; - interrupts = <0 IRQ_TYPE_EDGE_RISING>; - }; - }; - - i2c@80110000 { - bu21013_tp@5c { - compatible = "rohm,bu21013_tp"; - reg = <0x5c>; - avdd-supply = <&ab8500_ldo_aux1_reg>; - - rohm,touch-max-x = <384>; - rohm,touch-max-y = <704>; - rohm,flip-y; - pinctrl-names = "default"; - pinctrl-0 = <&touch_rohm_mode>; - }; - - bu21013_tp@5d { - compatible = "rohm,bu21013_tp"; - reg = <0x5d>; - avdd-supply = <&ab8500_ldo_aux1_reg>; - - rohm,touch-max-x = <384>; - rohm,touch-max-y = <704>; - rohm,flip-y; - pinctrl-names = "default"; - pinctrl-0 = <&touch_rohm_mode>; - }; - }; - - pinctrl { - /* Pull up this GPIO pin */ - stmpe { - stmpe_stuib_mode: stmpe_stuib { - stuib_cfg { - ste,pins = "GPIO218_AH11"; - ste,config = <&gpio_in_pu>; - }; - }; - }; - prox { - prox_stuib_mode: prox_stuib { - stuib_cfg { - pins = "GPIO217_AH12"; - ste,config = <&gpio_in_pu>; - }; - }; - }; - hall { - hall_stuib_mode: stuib_tvk { - stuib_cfg { - pins = "GPIO145_C13"; - ste,config = <&gpio_in_pu>; - }; - }; - }; - accelerometer { - accel_stuib_mode: accel_stuib { - /* Accelerometer interrupt lines 1 & 2 */ - stuib_cfg { - pins = "GPIO82_C1", "GPIO83_D3"; - ste,config = <&gpio_in_pu>; - }; - }; - }; - magnetometer { - magneto_stuib_mode: magneto_stuib { - /* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */ - stuib_cfg1 { - pins = "GPIO31_V3"; - ste,config = <&gpio_in_pu>; - }; - stuib_cfg2 { - pins = "GPIO32_V2"; - ste,config = <&gpio_in_pd>; - }; - }; - }; - touch { - touch_rohm_mode: touch_rohm { - /* - * ROHM touch screen uses GPIO 143 for - * RST1, GPIO 146 for RST2 and - * GPIO 67 for interrupts. Pull-up - * the IRQ line and drive both - * reset signals low. - */ - stuib_cfg1 { - pins = "GPIO143_D12", "GPIO146_D13"; - ste,config = <&gpio_out_lo>; - }; - stuib_cfg2 { - pins = "GPIO67_G2"; - ste,config = <&gpio_in_pu>; - }; - }; - }; - }; - - mcde@a0350000 { - status = "okay"; - - dsi@a0351000 { - panel { - compatible = "samsung,s6d16d0"; - reg = <0>; - vdd1-supply = <&ab8500_ldo_aux1_reg>; - reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; - }; - }; - }; - }; -}; |