ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 657 deletions

diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
deleted file mode 100644
index 9a3d6546399d..000000000000
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ /dev/null
@@ -1,657 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2011 ST-Ericsson AB
- */
-
-/dts-v1/;
-#include "ste-db9500.dtsi"
-#include "ste-href-ab8500.dtsi"
-#include "ste-href-family-pinctrl.dtsi"
-
-/ {
-	model = "Calao Systems Snowball platform with device tree";
-	compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	battery: battery {
-		compatible = "simple-battery";
-		battery-type = "lithium-ion-polymer";
-	};
-
-	thermal-zones {
-		battery-thermal {
-			/* This zone will be polled by the battery temperature code */
-			polling-delay = <0>;
-			polling-delay-passive = <0>;
-			thermal-sensors = <&bat_therm>;
-
-			trips {
-				battery-crit-hi {
-					temperature = <70000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-	};
-
-	bat_therm: thermistor {
-		compatible = "murata,ncp18wb473";
-		io-channels = <&gpadc 0x02>; /* BatTemp */
-		pullup-uv = <1800000>;
-		pullup-ohm = <230000>;
-		pulldown-ohm = <0>;
-		#thermal-sensor-cells = <0>;
-	};
-
-	en_3v3_reg: en_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "en-3v3-fixed-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		/* AB8500 GPIOs start from 1 - offset 25 is GPIO26. */
-		gpio = <&ab8500_gpio 25 0x4>;
-		startup-delay-us = <5000>;
-		enable-active-high;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		button@1 {
-			debounce-interval = <50>;
-			wakeup-source;
-			linux,code = <2>;
-			label = "userpb";
-			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		};
-		button@2 {
-			debounce-interval = <50>;
-			wakeup-source;
-			linux,code = <3>;
-			label = "extkb1";
-			gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
-		};
-		button@3 {
-			debounce-interval = <50>;
-			wakeup-source;
-			linux,code = <4>;
-			label = "extkb2";
-			gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
-		};
-		button@4 {
-			debounce-interval = <50>;
-			wakeup-source;
-			linux,code = <5>;
-			label = "extkb3";
-			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
-		};
-		button@5 {
-			debounce-interval = <50>;
-			wakeup-source;
-			linux,code = <6>;
-			label = "extkb4";
-			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpioled_snowball_mode>;
-		used-led {
-			label = "user_led";
-			gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	soc {
-		/* Name the GPIO muxed rails on the Snowball board */
-		gpio@8012e000 {
-			/* GPIOs 0 - 31 */
-			gpio-line-names = "", "", "", "", "", "", "", "",
-				     "", "", "", "", "", "", "", "",
-				     "", "", "", "", "", "", "", "",
-				     "", "", "", "", "", "", "",
-				     "AP_GPIO31";
-		};
-
-		gpio@8012e080 {
-			/* GPIOs 32 - 63 */
-			gpio-line-names = "USR PB", "", "", "", "", "", "", "",
-				     "", "", "", "", "", "", "", "",
-				     "", "", "", "", "", "", "", "",
-				     "", "", "", "", "", "", "", "";
-		};
-
-		gpio@8000e000 {
-			/* GPIOs 64 - 95 */
-			gpio-line-names = "", "", "", "", "AP_GPIO68", "", "", "",
-				     "", "", "", "", "", "", "", "",
-				     "", "", "", "", "", "", "", "",
-				     "", "", "", "", "", "", "", "";
-		};
-
-		gpio@8000e100 {
-			/* GPIOs 128 - 159 */
-			gpio-line-names = "", "", "", "", "", "", "", "",
-				     "", "", "", "", "IRQ_LAN", "RSTn_LAN",
-				     "USR_LED", "", "", "", "", "", "",
-				     "", "", "AP_GPIO151", "AP_GPIO152",
-				     "", "", "", "", "", "", "";
-		};
-
-		gpio@8000e180 {
-			/* GPIOs 160 - 191 */
-			gpio-line-names = "", "AP_GPIO161", "AP_GPIO162",
-				     "ACCELEROMETER_INT1_RDY",
-				     "ACCELEROMETER_INT2", "MAG_DRDY",
-				     "GYRO_DRDY", "RSTn_MLC", "RSTn_SLC",
-				     "GYRO_INT", "UART_WAKE", "GBF_RESET",
-				     "", "", "", "",
-				     "", "", "", "", "", "", "", "",
-				     "", "", "", "", "", "", "", "";
-		};
-
-		gpio@8011e000 {
-			/* GPIOs 192 - 223 */
-			gpio-line-names = "HDTV_INTn", "", "", "", "HDTV_RST",
-				     "", "", "", "", "", "", "", "", "",
-				     "", "", "", "", "", "", "", "", "",
-				     "WLAN_RESETN", "WLAN_IRQ", "MMC_EN",
-				     "MMC_CD", "", "", "", "", "";
-		};
-
-		gpio@8011e080 {
-			/* GPIOs 224 - 255 */
-			gpio-line-names = "", "", "", "", "SD_SEL", "", "", "",
-				     "", "", "", "", "", "", "", "",
-				     "", "", "", "", "", "", "", "",
-				     "", "", "", "", "", "", "", "";
-		};
-
-		msp0: msp@80123000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&msp0txrxtfstck_a_1_default>;
-			status = "okay";
-		};
-
-		msp1: msp@80124000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&msp1txrx_a_1_default>;
-			status = "okay";
-		};
-
-		msp2: msp@80117000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&msp2_a_1_default>;
-		};
-
-		msp3: msp@80125000 {
-			status = "okay";
-		};
-
-		external-bus@50000000 {
-			status = "okay";
-
-			ethernet@0 {
-				compatible = "smsc,lan9115";
-				reg = <0 0x10000>;
-				interrupts = <12 IRQ_TYPE_EDGE_RISING>;
-				interrupt-parent = <&gpio4>;
-				vdd33a-supply = <&en_3v3_reg>;
-				vddvario-supply = <&db8500_vape_reg>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&eth_snowball_mode>;
-
-				reg-shift = <1>;
-				reg-io-width = <2>;
-				smsc,force-internal-phy;
-				smsc,irq-active-high;
-				smsc,irq-push-pull;
-
-				clocks = <&prcc_pclk 3 0>;
-			};
-		};
-
-		/* ST6G3244ME level translator for 1.8/2.9 V */
-		vmmci: regulator-gpio {
-			compatible = "regulator-gpio";
-
-			/* GPIO228 SD_SEL */
-			gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
-			/* GPIO217 MMC_EN */
-			enable-gpio = <&gpio6 25 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2900000>;
-			regulator-name = "mmci-reg";
-			regulator-type = "voltage";
-
-			startup-delay-us = <100>;
-
-			states = <1800000 0x1
-				  2900000 0x0>;
-		};
-
-		// External Micro SD slot
-		mmc@80126000 {
-			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <100000000>;
-			bus-width = <4>;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			sd-uhs-sdr12;
-			sd-uhs-sdr25;
-			/* All direction control is used */
-			st,sig-dir-cmd;
-			st,sig-dir-dat0;
-			st,sig-dir-dat2;
-			st,sig-dir-dat31;
-			st,sig-pin-fbclk;
-			full-pwr-cycle;
-			vmmc-supply = <&ab8500_ldo_aux3_reg>;
-			vqmmc-supply = <&vmmci>;
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&mc0_a_1_default &sdi0_default_mode>;
-			pinctrl-1 = <&mc0_a_1_sleep>;
-
-			/* GPIO218 MMC_CD */
-			cd-gpios  = <&gpio6 26 GPIO_ACTIVE_LOW>;
-
-			status = "okay";
-		};
-
-		// WLAN SDIO channel
-		mmc@80118000 {
-			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <100000000>;
-			bus-width = <4>;
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&mc1_a_1_default>;
-			pinctrl-1 = <&mc1_a_1_sleep>;
-
-			status = "okay";
-		};
-
-		// Unused PoP eMMC - register and put it to sleep by default */
-		mmc@80005000 {
-			arm,primecell-periphid = <0x10480180>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&mc2_a_1_sleep>;
-
-			status = "okay";
-		};
-
-		// On-board eMMC
-		mmc@80114000 {
-			arm,primecell-periphid = <0x10480180>;
-		        max-frequency = <100000000>;
-			bus-width = <8>;
-			cap-mmc-highspeed;
-			no-sdio;
-			no-sd;
-			vmmc-supply = <&ab8500_ldo_aux2_reg>;
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&mc4_a_1_default>;
-			pinctrl-1 = <&mc4_a_1_sleep>;
-
-			status = "okay";
-		};
-
-		serial@80120000 {
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&u0_a_1_default>;
-			pinctrl-1 = <&u0_a_1_sleep>;
-			status = "okay";
-		};
-
-		/* This UART is unused and thus left disabled */
-		serial@80121000 {
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&u1rxtx_a_1_default>;
-			pinctrl-1 = <&u1rxtx_a_1_sleep>;
-		};
-
-		serial@80007000 {
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&u2rxtx_c_1_default>;
-			pinctrl-1 = <&u2rxtx_c_1_sleep>;
-			status = "okay";
-		};
-
-		i2c@80004000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c0_a_1_default>;
-			pinctrl-1 = <&i2c0_a_1_sleep>;
-			status = "okay";
-		};
-
-		i2c@80122000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c1_b_2_default>;
-			pinctrl-1 = <&i2c1_b_2_sleep>;
-			status = "okay";
-		};
-
-		i2c@80128000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c2_b_2_default>;
-			pinctrl-1 = <&i2c2_b_2_sleep>;
-			status = "okay";
-			lsm303dlh@18 {
-				/* Accelerometer */
-				compatible = "st,lsm303dlh-accel";
-				st,drdy-int-pin = <1>;
-				reg = <0x18>;
-				vdd-supply = <&ab8500_ldo_aux1_reg>;
-				vddio-supply = <&db8500_vsmps2_reg>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&accel_snowball_mode>;
-				interrupt-parent = <&gpio5>;
-				interrupts = <3 IRQ_TYPE_EDGE_RISING>, /* INT1 */
-					     <4 IRQ_TYPE_EDGE_RISING>; /* INT2 */
-			};
-			lsm303dlh@1e {
-				/* Magnetometer */
-				compatible = "st,lsm303dlh-magn";
-				reg = <0x1e>;
-				vdd-supply = <&ab8500_ldo_aux1_reg>;
-				vddio-supply = <&db8500_vsmps2_reg>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&magneto_snowball_mode>;
-				interrupt-parent = <&gpio5>;
-				interrupts = <5 IRQ_TYPE_EDGE_RISING>; /* DRDY line */
-			};
-			l3g4200d@68 {
-				/* Gyroscope */
-				compatible = "st,l3g4200d-gyro";
-				st,drdy-int-pin = <2>;
-				reg = <0x68>;
-				vdd-supply = <&ab8500_ldo_aux1_reg>;
-				vddio-supply = <&db8500_vsmps2_reg>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&gyro_snowball_mode>;
-				interrupt-parent = <&gpio5>;
-				interrupts = <6 IRQ_TYPE_EDGE_RISING>, /* DRDY line */
-					     <9 IRQ_TYPE_EDGE_RISING>; /* INT1 */
-			};
-			lsp001wm@5c {
-				/* Barometer/pressure sensor */
-				compatible = "st,lps001wp-press";
-				reg = <0x5c>;
-				vdd-supply = <&ab8500_ldo_aux1_reg>;
-				vddio-supply = <&db8500_vsmps2_reg>;
-			};
-		};
-
-		i2c@80110000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c3_c_2_default>;
-			pinctrl-1 = <&i2c3_c_2_sleep>;
-			status = "okay";
-		};
-
-		spi@80002000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ssp0_snowball_mode>;
-			status = "okay";
-		};
-
-		prcmu@80157000 {
-			ab8500 {
-				gpio {
-					/*
-					 * AB8500 GPIOs are numbered starting from 1, so the first
-					 * index 0 is what in the datasheet is called "GPIO1", and
-					 * the second is "GPIO2" and so forth. Confusingly, the
-					 * Snowball schematic then names the "GPIO2" line "PM_GPIO1".
-					 * while later naming "GPIO4" as "PM_GPIO4".
-					 */
-					gpio-line-names = "", /* AB8500 GPIO1 */
-						     "PM_GPIO1", /* AB8500 GPIO2 */
-						     "WLAN_CLK_REQ", /* AB8500 GPIO3 */
-						     "PM_GPIO4", /* AB8500 GPIO4 */
-						     "", "", "", "", "", "", "", "", "", "", "",
-						     "EN_3V6", /* AB8500 GPIO16 */
-						     "", "", "", "" ,"", "", "", "", "",
-						     "EN_3V3", /* AB8500 GPIO26 */
-						     "", "", "", "", "", "", "", "", "", "", "", "", "",
-						     "PM_GPIO40", /* AB8500 GPIO40 */
-						     "PM_GPIO41", /* AB8500 GPIO41 */
-						     "PM_GPIO42"; /* AB8500 GPIO42 */
-				};
-
-				phy {
-					pinctrl-names = "default", "sleep";
-					pinctrl-0 = <&usb_a_1_default>;
-					pinctrl-1 = <&usb_a_1_sleep>;
-				};
-
-				ext_regulators: regulator-external {
-					ab8500_ext1_reg: ab8500_ext1 {
-						regulator-name = "ab8500-ext-supply1";
-					};
-
-					ab8500_ext2_reg_reg: ab8500_ext2 {
-						regulator-name = "ab8500-ext-supply2";
-					};
-
-					ab8500_ext3_reg_reg: ab8500_ext3 {
-						regulator-name = "ab8500-ext-supply3";
-					};
-				};
-
-				regulator {
-					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
-						regulator-name = "V-DISPLAY";
-					};
-
-					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
-						regulator-name = "V-eMMC1";
-					};
-
-					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
-						regulator-name = "V-MMC-SD";
-					};
-
-					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
-						regulator-name = "V-INTCORE";
-					};
-
-					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
-						regulator-name = "V-TVOUT";
-					};
-
-					ab8500_ldo_audio_reg: ab8500_ldo_audio {
-						regulator-name = "V-AUD";
-					};
-
-					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
-						regulator-name = "V-AMIC1";
-					};
-
-					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
-						regulator-name = "V-AMIC2";
-					};
-
-					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
-						regulator-name = "V-DMIC";
-					};
-
-					ab8500_ldo_ana_reg: ab8500_ldo_ana {
-						regulator-name = "V-CSI/DSI";
-					};
-				};
-			};
-		};
-
-		pinctrl {
-			/*
-			 * Set this up using hogs, as time goes by and as seems fit, these
-			 * can be moved over to being controlled by respective device.
-			 */
-			pinctrl-names = "default";
-			pinctrl-0 = <&gbf_snowball_mode>,
-				  <&wlan_snowball_mode>;
-
-			ethernet {
-				/*
-				 * Mux in "SM" which is used for the
-				 * SMSC911x Ethernet adapter
-				 */
-				eth_snowball_mode: eth_snowball {
-					snowball_mux {
-						function = "sm";
-						groups = "sm_b_1";
-					};
-					/* LAN IRQ pin */
-					snowball_cfg1 {
-						pins = "GPIO140_B11";
-						ste,config = <&in_nopull>;
-					};
-					/* LAN reset pin */
-					snowball_cfg2 {
-						pins = "GPIO141_C12";
-						ste,config = <&gpio_out_hi>;
-					};
-
-				};
-			};
-			sdi0 {
-				sdi0_default_mode: sdi0_default {
-					snowball_mux {
-						function = "mc0";
-						/* Add the DAT31 pin even if it is not really used */
-						groups = "mc0dat31dir_a_1";
-					};
-					snowball_cfg1 {
-						pins = "GPIO21_AB3"; /* DAT31DIR */
-						ste,config = <&out_hi>;
-					};
-					/* SD card detect GPIO pin, extend default state */
-					snowball_cfg2 {
-						pins = "GPIO218_AH11";
-						ste,config = <&gpio_in_pu>;
-					};
-					/* VMMCI level-shifter enable */
-					snowball_cfg3 {
-						pins = "GPIO217_AH12";
-						ste,config = <&gpio_out_hi>;
-					};
-					/* VMMCI level-shifter voltage select */
-					snowball_cfg4 {
-						pins = "GPIO228_AJ6";
-						ste,config = <&gpio_out_hi>;
-					};
-				};
-			};
-			ssp0 {
-				ssp0_snowball_mode: ssp0_snowball_default {
-					snowball_mux {
-						function = "ssp0";
-						groups = "ssp0_a_1";
-					};
-					snowball_cfg1 {
-						pins = "GPIO144_B13"; /* FRM */
-						ste,config = <&gpio_out_hi>;
-					};
-					snowball_cfg2 {
-						pins = "GPIO145_C13"; /* RXD */
-						ste,config = <&in_pd>;
-					};
-					snowball_cfg3 {
-						pins =
-						"GPIO146_D13", /* TXD */
-						"GPIO143_D12"; /* CLK */
-						ste,config = <&out_lo>;
-					};
-
-				};
-			};
-			gpio_led {
-				gpioled_snowball_mode: gpioled_default {
-					snowball_cfg1 {
-						pins = "GPIO142_C11";
-						ste,config = <&gpio_out_hi>;
-					};
-
-				};
-			};
-			accelerometer {
-				accel_snowball_mode: accel_snowball {
-					/* Accelerometer lines */
-					snowball_cfg1 {
-						pins =
-						"GPIO163_C20", /* ACCEL_IRQ1 */
-						"GPIO164_B21"; /* ACCEL_IRQ2 */
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-			gyro {
-				gyro_snowball_mode: gyro_snowball {
-					snowball_cfg1 {
-						pins =
-						"GPIO166_A22", /* DRDY */
-						"GPIO169_D22"; /* INT */
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-			magnetometer {
-				magneto_snowball_mode: magneto_snowball {
-					snowball_cfg1 {
-						pins = "GPIO165_C21"; /* MAG_DRDY */
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-			gbf {
-				gbf_snowball_mode: gbf_snowball {
-					/*
-					 * GBF (GPS, Bluetooth, FM-radio) interface,
-					 * pull low to reset state
-					 */
-					snowball_cfg1 {
-						pins = "GPIO171_D23"; /* GBF_ENA_RESET */
-						ste,config = <&gpio_out_lo>;
-					};
-				 };
-			};
-			wlan {
-				wlan_snowball_mode: wlan_snowball {
-					/*
-					 * Activate this mode with the WLAN chip.
-					 * These are plain GPIO pins used by WLAN
-					 */
-					snowball_cfg1 {
-						pins =
-						"GPIO161_D21", /* WLAN_PMU_EN */
-						"GPIO215_AH13"; /* WLAN_ENA */
-						ste,config = <&gpio_out_lo>;
-					};
-					snowball_cfg2 {
-						pins = "GPIO216_AG12"; /* WLAN_IRQ */
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-		};
-
-		mcde@a0350000 {
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&lcd_default_mode>;
-			pinctrl-1 = <&lcd_sleep_mode>;
-		};
-	};
-};